Submitted by:            DJ Lucas <dj@linuxfromscratch.org>
Date:                    2021-06-09
Initial Package Version: 1.20.7.1
Upstream Status:         Pending - not all needed
Origin:                  self
Description:             Removes dependency on autoconf in early build.

diff -Naurp dpkg-1.20.7.1-orig/ABOUT-NLS dpkg-1.20.7.1/ABOUT-NLS
--- dpkg-1.20.7.1-orig/ABOUT-NLS	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/ABOUT-NLS	2021-06-09 18:22:47.458275374 -0500
@@ -0,0 +1 @@
+<https://www.gnu.org/software/gettext/manual/html_node/Users.html>
diff -Naurp dpkg-1.20.7.1-orig/aclocal.m4 dpkg-1.20.7.1/aclocal.m4
--- dpkg-1.20.7.1-orig/aclocal.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/aclocal.m4	2021-06-09 18:22:58.647292882 -0500
@@ -0,0 +1,1496 @@
+# generated automatically by aclocal 1.16.1 -*- Autoconf -*-
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# pkg.m4 - Macros to locate and utilise pkg-config.   -*- Autoconf -*-
+# serial 12 (pkg-config-0.29.2)
+
+dnl Copyright © 2004 Scott James Remnant <scott@netsplit.com>.
+dnl Copyright © 2012-2015 Dan Nicholson <dbn.lists@gmail.com>
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but
+dnl WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+dnl 02111-1307, USA.
+dnl
+dnl As a special exception to the GNU General Public License, if you
+dnl distribute this file as part of a program that contains a
+dnl configuration script generated by Autoconf, you may include it under
+dnl the same distribution terms that you use for the rest of that
+dnl program.
+
+dnl PKG_PREREQ(MIN-VERSION)
+dnl -----------------------
+dnl Since: 0.29
+dnl
+dnl Verify that the version of the pkg-config macros are at least
+dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
+dnl installed version of pkg-config, this checks the developer's version
+dnl of pkg.m4 when generating configure.
+dnl
+dnl To ensure that this macro is defined, also add:
+dnl m4_ifndef([PKG_PREREQ],
+dnl     [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])])
+dnl
+dnl See the "Since" comment for each macro you use to see what version
+dnl of the macros you require.
+m4_defun([PKG_PREREQ],
+[m4_define([PKG_MACROS_VERSION], [0.29.2])
+m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
+    [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])])
+])dnl PKG_PREREQ
+
+dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
+dnl ----------------------------------
+dnl Since: 0.16
+dnl
+dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
+dnl first found in the path. Checks that the version of pkg-config found
+dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
+dnl used since that's the first version where most current features of
+dnl pkg-config existed.
+AC_DEFUN([PKG_PROG_PKG_CONFIG],
+[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
+m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
+m4_pattern_allow([^PKG_CONFIG_(DISABLE_UNINSTALLED|TOP_BUILD_DIR|DEBUG_SPEW)$])
+AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])
+AC_ARG_VAR([PKG_CONFIG_PATH], [directories to add to pkg-config's search path])
+AC_ARG_VAR([PKG_CONFIG_LIBDIR], [path overriding pkg-config's built-in search path])
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	AC_PATH_TOOL([PKG_CONFIG], [pkg-config])
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=m4_default([$1], [0.9.0])
+	AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version])
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		AC_MSG_RESULT([yes])
+	else
+		AC_MSG_RESULT([no])
+		PKG_CONFIG=""
+	fi
+fi[]dnl
+])dnl PKG_PROG_PKG_CONFIG
+
+dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------------------------------
+dnl Since: 0.18
+dnl
+dnl Check to see whether a particular set of modules exists. Similar to
+dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
+dnl
+dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+dnl only at the first occurence in configure.ac, so if the first place
+dnl it's called might be skipped (such as if it is within an "if", you
+dnl have to call PKG_CHECK_EXISTS manually
+AC_DEFUN([PKG_CHECK_EXISTS],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+if test -n "$PKG_CONFIG" && \
+    AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then
+  m4_default([$2], [:])
+m4_ifvaln([$3], [else
+  $3])dnl
+fi])
+
+dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+dnl ---------------------------------------------
+dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
+dnl pkg_failed based on the result.
+m4_define([_PKG_CONFIG],
+[if test -n "$$1"; then
+    pkg_cv_[]$1="$$1"
+ elif test -n "$PKG_CONFIG"; then
+    PKG_CHECK_EXISTS([$3],
+                     [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes ],
+		     [pkg_failed=yes])
+ else
+    pkg_failed=untried
+fi[]dnl
+])dnl _PKG_CONFIG
+
+dnl _PKG_SHORT_ERRORS_SUPPORTED
+dnl ---------------------------
+dnl Internal check to see if pkg-config supports short errors.
+AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi[]dnl
+])dnl _PKG_SHORT_ERRORS_SUPPORTED
+
+
+dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl   [ACTION-IF-NOT-FOUND])
+dnl --------------------------------------------------------------
+dnl Since: 0.4.0
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
+dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
+AC_DEFUN([PKG_CHECK_MODULES],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
+AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
+
+pkg_failed=no
+AC_MSG_CHECKING([for $2])
+
+_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
+_PKG_CONFIG([$1][_LIBS], [libs], [$2])
+
+m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS
+and $1[]_LIBS to avoid the need to call pkg-config.
+See the pkg-config man page for more details.])
+
+if test $pkg_failed = yes; then
+        AC_MSG_RESULT([no])
+        _PKG_SHORT_ERRORS_SUPPORTED
+        if test $_pkg_short_errors_supported = yes; then
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "$2" 2>&1`
+        else
+	        $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "$2" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD
+
+	m4_default([$4], [AC_MSG_ERROR(
+[Package requirements ($2) were not met:
+
+$$1_PKG_ERRORS
+
+Consider adjusting the PKG_CONFIG_PATH environment variable if you
+installed software in a non-standard prefix.
+
+_PKG_TEXT])[]dnl
+        ])
+elif test $pkg_failed = untried; then
+        AC_MSG_RESULT([no])
+	m4_default([$4], [AC_MSG_FAILURE(
+[The pkg-config script could not be found or is too old.  Make sure it
+is in your PATH or set the PKG_CONFIG environment variable to the full
+path to pkg-config.
+
+_PKG_TEXT
+
+To get pkg-config, see <http://pkg-config.freedesktop.org/>.])[]dnl
+        ])
+else
+	$1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS
+	$1[]_LIBS=$pkg_cv_[]$1[]_LIBS
+        AC_MSG_RESULT([yes])
+	$3
+fi[]dnl
+])dnl PKG_CHECK_MODULES
+
+
+dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl   [ACTION-IF-NOT-FOUND])
+dnl ---------------------------------------------------------------------
+dnl Since: 0.29
+dnl
+dnl Checks for existence of MODULES and gathers its build flags with
+dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
+dnl and VARIABLE-PREFIX_LIBS from --libs.
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
+dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
+dnl configure.ac.
+AC_DEFUN([PKG_CHECK_MODULES_STATIC],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+_save_PKG_CONFIG=$PKG_CONFIG
+PKG_CONFIG="$PKG_CONFIG --static"
+PKG_CHECK_MODULES($@)
+PKG_CONFIG=$_save_PKG_CONFIG[]dnl
+])dnl PKG_CHECK_MODULES_STATIC
+
+
+dnl PKG_INSTALLDIR([DIRECTORY])
+dnl -------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable pkgconfigdir as the location where a module
+dnl should install pkg-config .pc files. By default the directory is
+dnl $libdir/pkgconfig, but the default can be changed by passing
+dnl DIRECTORY. The user can override through the --with-pkgconfigdir
+dnl parameter.
+AC_DEFUN([PKG_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+    [pkg-config installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([pkgconfigdir],
+    [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
+    [with_pkgconfigdir=]pkg_default)
+AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_INSTALLDIR
+
+
+dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
+dnl --------------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable noarch_pkgconfigdir as the location where a
+dnl module should install arch-independent pkg-config .pc files. By
+dnl default the directory is $datadir/pkgconfig, but the default can be
+dnl changed by passing DIRECTORY. The user can override through the
+dnl --with-noarch-pkgconfigdir parameter.
+AC_DEFUN([PKG_NOARCH_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+    [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([noarch-pkgconfigdir],
+    [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
+    [with_noarch_pkgconfigdir=]pkg_default)
+AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_NOARCH_INSTALLDIR
+
+
+dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
+dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------
+dnl Since: 0.28
+dnl
+dnl Retrieves the value of the pkg-config variable for the given module.
+AC_DEFUN([PKG_CHECK_VAR],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
+
+_PKG_CONFIG([$1], [variable="][$3]["], [$2])
+AS_VAR_COPY([$1], [pkg_cv_][$1])
+
+AS_VAR_IF([$1], [""], [$5], [$4])dnl
+])dnl PKG_CHECK_VAR
+
+# Copyright (C) 2002-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.16'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.16.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.16.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# Copyright (C) 2011-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_AR([ACT-IF-FAIL])
+# -------------------------
+# Try to determine the archiver interface, and trigger the ar-lib wrapper
+# if it is needed.  If the detection of archiver interface fails, run
+# ACT-IF-FAIL (default is to abort configure with a proper error message).
+AC_DEFUN([AM_PROG_AR],
+[AC_BEFORE([$0], [LT_INIT])dnl
+AC_BEFORE([$0], [AC_PROG_LIBTOOL])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([ar-lib])dnl
+AC_CHECK_TOOLS([AR], [ar lib "link -lib"], [false])
+: ${AR=ar}
+
+AC_CACHE_CHECK([the archiver ($AR) interface], [am_cv_ar_interface],
+  [AC_LANG_PUSH([C])
+   am_cv_ar_interface=ar
+   AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int some_variable = 0;]])],
+     [am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([am_ar_try])
+      if test "$ac_status" -eq 0; then
+        am_cv_ar_interface=ar
+      else
+        am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&AS_MESSAGE_LOG_FD'
+        AC_TRY_EVAL([am_ar_try])
+        if test "$ac_status" -eq 0; then
+          am_cv_ar_interface=lib
+        else
+          am_cv_ar_interface=unknown
+        fi
+      fi
+      rm -f conftest.lib libconftest.a
+     ])
+   AC_LANG_POP([C])])
+
+case $am_cv_ar_interface in
+ar)
+  ;;
+lib)
+  # Microsoft lib, so override with the ar-lib wrapper script.
+  # FIXME: It is wrong to rewrite AR.
+  # But if we don't then we get into trouble of one sort or another.
+  # A longer-term fix would be to have automake use am__AR in this case,
+  # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+  # similar.
+  AR="$am_aux_dir/ar-lib $AR"
+  ;;
+unknown)
+  m4_default([$1],
+             [AC_MSG_ERROR([could not determine $AR interface])])
+  ;;
+esac
+AC_SUBST([AR])dnl
+])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
+      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
+      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
+      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                    [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+  [--enable-dependency-tracking],
+  [do not reject slow dependency extractors])
+AS_HELP_STRING(
+  [--disable-dependency-tracking],
+  [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  # TODO: see whether this extra hack can be removed once we start
+  # requiring Autoconf 2.70 or later.
+  AS_CASE([$CONFIG_FILES],
+          [*\'*], [eval set x "$CONFIG_FILES"],
+          [*], [set x $CONFIG_FILES])
+  shift
+  # Used to flag and report bootstrapping failures.
+  am_rc=0
+  for am_mf
+  do
+    # Strip MF so we end up with the name of the file.
+    am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile which includes
+    # dependency-tracking related rules and includes.
+    # Grep'ing the whole file directly is not great: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+      || continue
+    am_dirpart=`AS_DIRNAME(["$am_mf"])`
+    am_filepart=`AS_BASENAME(["$am_mf"])`
+    AM_RUN_LOG([cd "$am_dirpart" \
+      && sed -e '/# am--include-marker/d' "$am_filepart" \
+        | $MAKE -f - am--depfiles]) || am_rc=$?
+  done
+  if test $am_rc -ne 0; then
+    AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
+    for automatic dependency tracking.  Try re-running configure with the
+    '--disable-dependency-tracking' option to at least be able to build
+    the package (albeit without support for automatic dependency tracking).])
+  fi
+  AS_UNSET([am_dirpart])
+  AS_UNSET([am_filepart])
+  AS_UNSET([am_mf])
+  AS_UNSET([am_rc])
+  rm -f conftest-deps.mk
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking is enabled.
+# This creates each '.Po' and '.Plo' makefile fragment that we'll need in
+# order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+             [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+  [ok:ok],,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES([CC])],
+		  [m4_define([AC_PROG_CC],
+			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES([CXX])],
+		  [m4_define([AC_PROG_CXX],
+			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES([OBJC])],
+		  [m4_define([AC_PROG_OBJC],
+			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+		  [_AM_DEPENDENCIES([OBJCXX])],
+		  [m4_define([AC_PROG_OBJCXX],
+			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+  fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check whether make has an 'include' directive that can support all
+# the idioms we need for our automatic dependency tracking code.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
+cat > confinc.mk << 'END'
+am__doit:
+	@echo this is the am__doit target >confinc.out
+.PHONY: am__doit
+END
+am__include="#"
+am__quote=
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+  AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
+  AS_CASE([$?:`cat confinc.out 2>/dev/null`],
+      ['0:this is the am__doit target'],
+      [AS_CASE([$s],
+          [BSD], [am__include='.include' am__quote='"'],
+          [am__include='include' am__quote=''])])
+  if test "$am__include" != "#"; then
+    _am_result="yes ($s style)"
+    break
+  fi
+done
+rm -f confinc.* confmf.*
+AC_MSG_RESULT([${_am_result}])
+AC_SUBST([am__include])])
+AC_SUBST([am__quote])])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake.  We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+  [whether $CC understands -c and -o together],
+  [am_cv_prog_cc_c_o],
+  [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$[*]" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$[*]" != "X $srcdir/configure conftest.file" \
+	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment])
+     fi
+     if test "$[2]" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+  [AC_MSG_CHECKING([that generated files are newer than configure])
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+  [--enable-silent-rules],
+  [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+  [--disable-silent-rules],
+  [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+   [am_cv_make_support_nested_variables],
+   [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+  dnl Using '$V' instead of '$(V)' breaks IRIX make.
+  AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+  [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+  [m4_case([$1],
+    [ustar],
+     [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+      if test $am_uid -le $am_max_uid; then
+         AC_MSG_RESULT([yes])
+      else
+         AC_MSG_RESULT([no])
+         _am_tools=none
+      fi
+      AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+      if test $am_gid -le $am_max_gid; then
+         AC_MSG_RESULT([yes])
+      else
+        AC_MSG_RESULT([no])
+        _am_tools=none
+      fi],
+
+  [pax],
+    [],
+
+  [m4_fatal([Unknown tar format])])
+
+  AC_MSG_CHECKING([how to create a $1 tar archive])
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        AM_RUN_LOG([$_am_tar --version]) && break
+      done
+      am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x $1 -w "$$tardir"'
+      am__tar_='pax -L -x $1 -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+      am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+      am__untar='cpio -i -H $1 -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
+
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_$1}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      AM_RUN_LOG([$am__untar <conftest.tar])
+      AM_RUN_LOG([cat conftest.dir/file])
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
+  rm -rf conftest.dir
+
+  AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+  AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/dpkg-arch.m4])
+m4_include([m4/dpkg-build.m4])
+m4_include([m4/dpkg-compiler.m4])
+m4_include([m4/dpkg-coverage.m4])
+m4_include([m4/dpkg-funcs.m4])
+m4_include([m4/dpkg-libs.m4])
+m4_include([m4/dpkg-linker.m4])
+m4_include([m4/dpkg-progs.m4])
+m4_include([m4/dpkg-types.m4])
+m4_include([m4/dpkg-unicode.m4])
+m4_include([m4/gettext.m4])
+m4_include([m4/host-cpu-c-abi.m4])
+m4_include([m4/iconv.m4])
+m4_include([m4/intlmacosx.m4])
+m4_include([m4/lib-ld.m4])
+m4_include([m4/lib-link.m4])
+m4_include([m4/lib-prefix.m4])
+m4_include([m4/libtool.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
+m4_include([m4/nls.m4])
+m4_include([m4/po.m4])
+m4_include([m4/progtest.m4])
diff -Naurp dpkg-1.20.7.1-orig/build-aux/ar-lib dpkg-1.20.7.1/build-aux/ar-lib
--- dpkg-1.20.7.1-orig/build-aux/ar-lib	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/build-aux/ar-lib	2021-06-09 18:23:00.554295866 -0500
@@ -0,0 +1,270 @@
+#! /bin/sh
+# Wrapper for Microsoft lib.exe
+
+me=ar-lib
+scriptversion=2012-03-01.08; # UTC
+
+# Copyright (C) 2010-2018 Free Software Foundation, Inc.
+# Written by Peter Rosin <peda@lysator.liu.se>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+
+# func_error message
+func_error ()
+{
+  echo "$me: $1" 1>&2
+  exit 1
+}
+
+file_conv=
+
+# func_file_conv build_file
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv in
+	mingw)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_at_file at_file operation archive
+# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE
+# for each of them.
+# When interpreting the content of the @FILE, do NOT use func_file_conv,
+# since the user would need to supply preconverted file names to
+# binutils ar, at least for MinGW.
+func_at_file ()
+{
+  operation=$2
+  archive=$3
+  at_file_contents=`cat "$1"`
+  eval set x "$at_file_contents"
+  shift
+
+  for member
+  do
+    $AR -NOLOGO $operation:"$member" "$archive" || exit $?
+  done
+}
+
+case $1 in
+  '')
+     func_error "no command.  Try '$0 --help' for more information."
+     ;;
+  -h | --h*)
+    cat <<EOF
+Usage: $me [--help] [--version] PROGRAM ACTION ARCHIVE [MEMBER...]
+
+Members may be specified in a file named with @FILE.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "$me, version $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test $# -lt 3; then
+  func_error "you must specify a program, an action and an archive"
+fi
+
+AR=$1
+shift
+while :
+do
+  if test $# -lt 2; then
+    func_error "you must specify a program, an action and an archive"
+  fi
+  case $1 in
+    -lib | -LIB \
+    | -ltcg | -LTCG \
+    | -machine* | -MACHINE* \
+    | -subsystem* | -SUBSYSTEM* \
+    | -verbose | -VERBOSE \
+    | -wx* | -WX* )
+      AR="$AR $1"
+      shift
+      ;;
+    *)
+      action=$1
+      shift
+      break
+      ;;
+  esac
+done
+orig_archive=$1
+shift
+func_file_conv "$orig_archive"
+archive=$file
+
+# strip leading dash in $action
+action=${action#-}
+
+delete=
+extract=
+list=
+quick=
+replace=
+index=
+create=
+
+while test -n "$action"
+do
+  case $action in
+    d*) delete=yes  ;;
+    x*) extract=yes ;;
+    t*) list=yes    ;;
+    q*) quick=yes   ;;
+    r*) replace=yes ;;
+    s*) index=yes   ;;
+    S*)             ;; # the index is always updated implicitly
+    c*) create=yes  ;;
+    u*)             ;; # TODO: don't ignore the update modifier
+    v*)             ;; # TODO: don't ignore the verbose modifier
+    *)
+      func_error "unknown action specified"
+      ;;
+  esac
+  action=${action#?}
+done
+
+case $delete$extract$list$quick$replace,$index in
+  yes,* | ,yes)
+    ;;
+  yesyes*)
+    func_error "more than one action specified"
+    ;;
+  *)
+    func_error "no action specified"
+    ;;
+esac
+
+if test -n "$delete"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  for member
+  do
+    case $1 in
+      @*)
+        func_at_file "${1#@}" -REMOVE "$archive"
+        ;;
+      *)
+        func_file_conv "$1"
+        $AR -NOLOGO -REMOVE:"$file" "$archive" || exit $?
+        ;;
+    esac
+  done
+
+elif test -n "$extract"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  if test $# -gt 0; then
+    for member
+    do
+      case $1 in
+        @*)
+          func_at_file "${1#@}" -EXTRACT "$archive"
+          ;;
+        *)
+          func_file_conv "$1"
+          $AR -NOLOGO -EXTRACT:"$file" "$archive" || exit $?
+          ;;
+      esac
+    done
+  else
+    $AR -NOLOGO -LIST "$archive" | sed -e 's/\\/\\\\/g' | while read member
+    do
+      $AR -NOLOGO -EXTRACT:"$member" "$archive" || exit $?
+    done
+  fi
+
+elif test -n "$quick$replace"; then
+  if test ! -f "$orig_archive"; then
+    if test -z "$create"; then
+      echo "$me: creating $orig_archive"
+    fi
+    orig_archive=
+  else
+    orig_archive=$archive
+  fi
+
+  for member
+  do
+    case $1 in
+    @*)
+      func_file_conv "${1#@}"
+      set x "$@" "@$file"
+      ;;
+    *)
+      func_file_conv "$1"
+      set x "$@" "$file"
+      ;;
+    esac
+    shift
+    shift
+  done
+
+  if test -n "$orig_archive"; then
+    $AR -NOLOGO -OUT:"$archive" "$orig_archive" "$@" || exit $?
+  else
+    $AR -NOLOGO -OUT:"$archive" "$@" || exit $?
+  fi
+
+elif test -n "$list"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  $AR -NOLOGO -LIST "$archive" || exit $?
+fi
diff -Naurp dpkg-1.20.7.1-orig/build-aux/compile dpkg-1.20.7.1/build-aux/compile
--- dpkg-1.20.7.1-orig/build-aux/compile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/build-aux/compile	2021-06-09 18:23:00.555295868 -0500
@@ -0,0 +1,348 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
+  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff -Naurp dpkg-1.20.7.1-orig/build-aux/config.guess dpkg-1.20.7.1/build-aux/config.guess
--- dpkg-1.20.7.1-orig/build-aux/config.guess	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/build-aux/config.guess	2021-06-09 18:23:00.556295869 -0500
@@ -0,0 +1,1476 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright 1992-2018 Free Software Foundation, Inc.
+
+timestamp='2018-03-08'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+#
+# You can get the latest version of this script from:
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+#
+# Please send patches to <config-patches@gnu.org>.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Options:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2018 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > "$dummy.c" ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case "$UNAME_SYSTEM" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval "$set_cc_for_build"
+	cat <<-EOF > "$dummy.c"
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`"
+
+	# If ldd exists, use it to detect musl libc.
+	if command -v ldd >/dev/null && \
+		ldd --version 2>&1 | grep -q ^musl
+	then
+	    LIBC=musl
+	fi
+	;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+	    "/sbin/$sysctl" 2>/dev/null || \
+	    "/usr/sbin/$sysctl" 2>/dev/null || \
+	    echo unknown)`
+	case "$UNAME_MACHINE_ARCH" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    earmv*)
+		arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
+		endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
+		machine="${arch}${endian}"-unknown
+		;;
+	    *) machine="$UNAME_MACHINE_ARCH"-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently (or will in the future) and ABI.
+	case "$UNAME_MACHINE_ARCH" in
+	    earm*)
+		os=netbsdelf
+		;;
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval "$set_cc_for_build"
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# Determine ABI tags.
+	case "$UNAME_MACHINE_ARCH" in
+	    earm*)
+		expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+		abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "$UNAME_VERSION" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "$machine-${os}${release}${abi}"
+	exit ;;
+    *:Bitrig:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+	echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE"
+	exit ;;
+    *:LibertyBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
+	echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE"
+	exit ;;
+    *:MidnightBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE"
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE"
+	exit ;;
+    *:SolidBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE"
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd"$UNAME_RELEASE"
+	exit ;;
+    *:MirBSD:*:*)
+	echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE"
+	exit ;;
+    *:Sortix:*:*)
+	echo "$UNAME_MACHINE"-unknown-sortix
+	exit ;;
+    *:Redox:*:*)
+	echo "$UNAME_MACHINE"-unknown-redox
+	exit ;;
+    mips:OSF1:*.*)
+        echo mips-dec-osf1
+        exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE=alpha ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE=alpha ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE=alpha ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE=alphaev5 ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE=alphaev56 ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE=alphapca56 ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE=alphapca57 ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE=alphaev6 ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE=alphaev67 ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE=alphaev68 ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE=alphaev69 ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE=alphaev7 ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE=alphaev79 ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`"
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo "$UNAME_MACHINE"-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo "$UNAME_MACHINE"-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+	echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix"$UNAME_RELEASE"
+	exit ;;
+    arm*:riscos:*:*|arm*:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux"$UNAME_RELEASE"
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval "$set_cc_for_build"
+	SUN_ARCH=i386
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH=x86_64
+	    fi
+	fi
+	echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`"
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos"$UNAME_RELEASE"
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos"$UNAME_RELEASE"
+		;;
+	    sun4)
+		echo sparc-sun-sunos"$UNAME_RELEASE"
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos"$UNAME_RELEASE"
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint"$UNAME_RELEASE"
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint"$UNAME_RELEASE"
+	exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	echo m68k-atari-mint"$UNAME_RELEASE"
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	echo m68k-milan-mint"$UNAME_RELEASE"
+	exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	echo m68k-hades-mint"$UNAME_RELEASE"
+	exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	echo m68k-unknown-mint"$UNAME_RELEASE"
+	exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten"$UNAME_RELEASE"
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten"$UNAME_RELEASE"
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix"$UNAME_RELEASE"
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix"$UNAME_RELEASE"
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix"$UNAME_RELEASE"
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval "$set_cc_for_build"
+	sed 's/^	//' << EOF > "$dummy.c"
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
+	  dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos"$UNAME_RELEASE"
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ]
+	then
+	    if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \
+	       [ "$TARGET_BINARY_INTERFACE"x = x ]
+	    then
+		echo m88k-dg-dgux"$UNAME_RELEASE"
+	    else
+		echo m88k-dg-dguxbcs"$UNAME_RELEASE"
+	    fi
+	else
+	    echo i586-dg-dgux"$UNAME_RELEASE"
+	fi
+	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`"
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
+	fi
+	echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV"
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval "$set_cc_for_build"
+		sed 's/^		//' << EOF > "$dummy.c"
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/lslpp ] ; then
+		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+	else
+		IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
+	fi
+	echo "$IBM_ARCH"-ibm-aix"$IBM_REV"
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd"$UNAME_RELEASE"   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
+	case "$UNAME_MACHINE" in
+	    9000/31?)            HP_ARCH=m68000 ;;
+	    9000/[34]??)         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "$sc_cpu_version" in
+		      523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "$sc_kernel_bits" in
+			  32) HP_ARCH=hppa2.0n ;;
+			  64) HP_ARCH=hppa2.0w ;;
+			  '') HP_ARCH=hppa2.0 ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if [ "$HP_ARCH" = "" ]; then
+		    eval "$set_cc_for_build"
+		    sed 's/^		//' << EOF > "$dummy.c"
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ "$HP_ARCH" = hppa2.0w ]
+	then
+	    eval "$set_cc_for_build"
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH=hppa2.0w
+	    else
+		HP_ARCH=hppa64
+	    fi
+	fi
+	echo "$HP_ARCH"-hp-hpux"$HPUX_REV"
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux"$HPUX_REV"
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval "$set_cc_for_build"
+	sed 's/^	//' << EOF > "$dummy.c"
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo "$UNAME_MACHINE"-unknown-osf1mk
+	else
+	    echo "$UNAME_MACHINE"-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+	exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+	exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+	exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+	exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+	FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+	FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE"
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi"$UNAME_RELEASE"
+	exit ;;
+    *:BSD/OS:*:*)
+	echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE"
+	exit ;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case "$UNAME_PROCESSOR" in
+	    amd64)
+		UNAME_PROCESSOR=x86_64 ;;
+	    i386)
+		UNAME_PROCESSOR=i586 ;;
+	esac
+	echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
+	exit ;;
+    i*:CYGWIN*:*)
+	echo "$UNAME_MACHINE"-pc-cygwin
+	exit ;;
+    *:MINGW64*:*)
+	echo "$UNAME_MACHINE"-pc-mingw64
+	exit ;;
+    *:MINGW*:*)
+	echo "$UNAME_MACHINE"-pc-mingw32
+	exit ;;
+    *:MSYS*:*)
+	echo "$UNAME_MACHINE"-pc-msys
+	exit ;;
+    i*:PW*:*)
+	echo "$UNAME_MACHINE"-pc-pw32
+	exit ;;
+    *:Interix*:*)
+	case "$UNAME_MACHINE" in
+	    x86)
+		echo i586-pc-interix"$UNAME_RELEASE"
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix"$UNAME_RELEASE"
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix"$UNAME_RELEASE"
+		exit ;;
+	esac ;;
+    i*:UWIN*:*)
+	echo "$UNAME_MACHINE"-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`"
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC"
+	exit ;;
+    i*86:Minix:*:*)
+	echo "$UNAME_MACHINE"-pc-minix
+	exit ;;
+    aarch64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    aarch64_be:Linux:*:*)
+	UNAME_MACHINE=aarch64_be
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    arm*:Linux:*:*)
+	eval "$set_cc_for_build"
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi
+	    else
+		echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    cris:Linux:*:*)
+	echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
+	exit ;;
+    crisv32:Linux:*:*)
+	echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
+	exit ;;
+    e2k:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    frv:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    hexagon:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    i*86:Linux:*:*)
+	echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
+	exit ;;
+    ia64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    k1om:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    m32r*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    m68*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	eval "$set_cc_for_build"
+	sed 's/^	//' << EOF > "$dummy.c"
+	#undef CPU
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=${UNAME_MACHINE}el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=${UNAME_MACHINE}
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`"
+	test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; }
+	;;
+    mips64el:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    openrisc*:Linux:*:*)
+	echo or1k-unknown-linux-"$LIBC"
+	exit ;;
+    or32:Linux:*:* | or1k*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-"$LIBC"
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-"$LIBC"
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;;
+	  PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;;
+	  *)    echo hppa-unknown-linux-"$LIBC" ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-"$LIBC"
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-"$LIBC"
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-"$LIBC"
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-"$LIBC"
+	exit ;;
+    riscv32:Linux:*:* | riscv64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo "$UNAME_MACHINE"-ibm-linux-"$LIBC"
+	exit ;;
+    sh64*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    sh*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    tile*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    vax:Linux:*:*)
+	echo "$UNAME_MACHINE"-dec-linux-"$LIBC"
+	exit ;;
+    x86_64:Linux:*:*)
+	echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION"
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo "$UNAME_MACHINE"-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo "$UNAME_MACHINE"-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo "$UNAME_MACHINE"-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo "$UNAME_MACHINE"-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    i*86:*DOS:*:*)
+	echo "$UNAME_MACHINE"-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:*)
+	UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL"
+	else
+		echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL"
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}{$UNAME_VERSION}"
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo "$UNAME_MACHINE"-pc-isc"$UNAME_REL"
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL"
+	else
+		echo "$UNAME_MACHINE"-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configure will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv"$UNAME_RELEASE"  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos"$UNAME_RELEASE"
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv"$UNAME_RELEASE"
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo "$UNAME_MACHINE"-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo "$UNAME_MACHINE"-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux"$UNAME_RELEASE"
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+		echo mips-nec-sysv"$UNAME_RELEASE"
+	else
+		echo mips-unknown-sysv"$UNAME_RELEASE"
+	fi
+	exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    x86_64:Haiku:*:*)
+	echo x86_64-unknown-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    SX-ACE:SUPER-UX:*:*)
+	echo sxace-nec-superux"$UNAME_RELEASE"
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody"$UNAME_RELEASE"
+	exit ;;
+    *:Rhapsody:*:*)
+	echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE"
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	eval "$set_cc_for_build"
+	if test "$UNAME_PROCESSOR" = unknown ; then
+	    UNAME_PROCESSOR=powerpc
+	fi
+	if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then
+	    if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		       (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		       grep IS_64BIT_ARCH >/dev/null
+		then
+		    case $UNAME_PROCESSOR in
+			i386) UNAME_PROCESSOR=x86_64 ;;
+			powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		    esac
+		fi
+		# On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
+		if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
+		       (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		       grep IS_PPC >/dev/null
+		then
+		    UNAME_PROCESSOR=powerpc
+		fi
+	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # Avoid executing cc on OS X 10.9, as it ships with a stub
+	    # that puts up a graphical alert prompting to install
+	    # developer tools.  Any system running Mac OS X 10.7 or
+	    # later (Darwin 11 and later) is required to have a 64-bit
+	    # processor. This is not true of the ARM version of Darwin
+	    # that Apple uses in portable devices.
+	    UNAME_PROCESSOR=x86_64
+	fi
+	echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE"
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = x86; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE"
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NEO-*:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSE-*:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSR-*:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSV-*:NONSTOP_KERNEL:*:*)
+	echo nsv-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    NSX-*:NONSTOP_KERNEL:*:*)
+	echo nsx-tandem-nsk"$UNAME_RELEASE"
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE"
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = 386; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo "$UNAME_MACHINE"-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+	echo mips-sei-seiux"$UNAME_RELEASE"
+	exit ;;
+    *:DragonFly:*:*)
+	echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
+	exit ;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "$UNAME_MACHINE" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`"
+	exit ;;
+    i*86:rdos:*:*)
+	echo "$UNAME_MACHINE"-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo "$UNAME_MACHINE"-pc-aros
+	exit ;;
+    x86_64:VMkernel:*:*)
+	echo "$UNAME_MACHINE"-unknown-esx
+	exit ;;
+    amd64:Isilon\ OneFS:*:*)
+	echo x86_64-unknown-onefs
+	exit ;;
+esac
+
+echo "$0: unable to guess system type" >&2
+
+case "$UNAME_MACHINE:$UNAME_SYSTEM" in
+    mips:Linux | mips64:Linux)
+	# If we got here on MIPS GNU/Linux, output extra information.
+	cat >&2 <<EOF
+
+NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize
+the system type. Please install a C compiler and try again.
+EOF
+	;;
+esac
+
+cat >&2 <<EOF
+
+This script (version $timestamp), has failed to recognize the
+operating system you are using. If your script is old, overwrite *all*
+copies of config.guess and config.sub with the latest versions from:
+
+  https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+and
+  https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+
+If $0 has already been updated, send the following data and any
+information you think might be pertinent to config-patches@gnu.org to
+provide the necessary information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = "$UNAME_MACHINE"
+UNAME_RELEASE = "$UNAME_RELEASE"
+UNAME_SYSTEM  = "$UNAME_SYSTEM"
+UNAME_VERSION = "$UNAME_VERSION"
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff -Naurp dpkg-1.20.7.1-orig/build-aux/config.rpath dpkg-1.20.7.1/build-aux/config.rpath
--- dpkg-1.20.7.1-orig/build-aux/config.rpath	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/build-aux/config.rpath	2021-06-09 18:22:47.459275375 -0500
@@ -0,0 +1,684 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+#   Copyright 1996-2019 Free Software Foundation, Inc.
+#   Taken from GNU libtool, 2001
+#   Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+#   This file is free software; the Free Software Foundation gives
+#   unlimited permission to copy and/or distribute it, with or without
+#   modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+#    CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+#    CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+#   than 256 bytes, otherwise the compiler driver will dump core. The only
+#   known workaround is to choose shorter directory names for the build
+#   directory and/or the installation directory.
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's _LT_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+  wl='-Wl,'
+else
+  case "$host_os" in
+    aix*)
+      wl='-Wl,'
+      ;;
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      ;;
+    hpux9* | hpux10* | hpux11*)
+      wl='-Wl,'
+      ;;
+    irix5* | irix6* | nonstopux*)
+      wl='-Wl,'
+      ;;
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+        ecc*)
+          wl='-Wl,'
+          ;;
+        icc* | ifort*)
+          wl='-Wl,'
+          ;;
+        lf95*)
+          wl='-Wl,'
+          ;;
+        nagfor*)
+          wl='-Wl,-Wl,,'
+          ;;
+        pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+          wl='-Wl,'
+          ;;
+        ccc*)
+          wl='-Wl,'
+          ;;
+        xl* | bgxl* | bgf* | mpixl*)
+          wl='-Wl,'
+          ;;
+        como)
+          wl='-lopt='
+          ;;
+        *)
+          case `$CC -V 2>&1 | sed 5q` in
+            *Sun\ F* | *Sun*Fortran*)
+              wl=
+              ;;
+            *Sun\ C*)
+              wl='-Wl,'
+              ;;
+          esac
+          ;;
+      esac
+      ;;
+    newsos6)
+      ;;
+    *nto* | *qnx*)
+      ;;
+    osf3* | osf4* | osf5*)
+      wl='-Wl,'
+      ;;
+    rdos*)
+      ;;
+    solaris*)
+      case $cc_basename in
+        f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+          wl='-Qoption ld '
+          ;;
+        *)
+          wl='-Wl,'
+          ;;
+      esac
+      ;;
+    sunos4*)
+      wl='-Qoption ld '
+      ;;
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      wl='-Wl,'
+      ;;
+    sysv4*MP*)
+      ;;
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      wl='-Wl,'
+      ;;
+    unicos*)
+      wl='-Wl,'
+      ;;
+    uts4*)
+      ;;
+  esac
+fi
+
+# Code taken from libtool.m4's _LT_LINKER_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+  # Set some defaults for GNU ld with shared library support. These
+  # are reset later if shared libraries are not supported. Putting them
+  # here allows them to be overridden if necessary.
+  # Unlike libtool, we use -rpath here, not --rpath, since the documented
+  # option of GNU ld is called -rpath, not --rpath.
+  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+  case "$host_os" in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+        ld_shlibs=no
+      fi
+      ;;
+    amigaos*)
+      case "$host_cpu" in
+        powerpc)
+          ;;
+        m68k)
+          hardcode_libdir_flag_spec='-L$libdir'
+          hardcode_minus_L=yes
+          ;;
+      esac
+      ;;
+    beos*)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    cygwin* | mingw* | pw32* | cegcc*)
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    haiku*)
+      ;;
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      ;;
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    netbsd*)
+      ;;
+    solaris*)
+      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+        ld_shlibs=no
+      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+          ld_shlibs=no
+          ;;
+        *)
+          if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+            hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+          else
+            ld_shlibs=no
+          fi
+          ;;
+      esac
+      ;;
+    sunos4*)
+      hardcode_direct=yes
+      ;;
+    *)
+      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+  esac
+  if test "$ld_shlibs" = no; then
+    hardcode_libdir_flag_spec=
+  fi
+else
+  case "$host_os" in
+    aix3*)
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes; then
+        # Neither direct hardcoding nor static linking is supported with a
+        # broken collect2.
+        hardcode_direct=unsupported
+      fi
+      ;;
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+        # On IA64, the linker does run time linking by default, so we don't
+        # have to do anything special.
+        aix_use_runtimelinking=no
+      else
+        aix_use_runtimelinking=no
+        # Test if we are trying to use run time linking or normal
+        # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+        # need to do runtime linking.
+        case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+          for ld_flag in $LDFLAGS; do
+            if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+              aix_use_runtimelinking=yes
+              break
+            fi
+          done
+          ;;
+        esac
+      fi
+      hardcode_direct=yes
+      hardcode_libdir_separator=':'
+      if test "$GCC" = yes; then
+        case $host_os in aix4.[012]|aix4.[012].*)
+          collect2name=`${CC} -print-prog-name=collect2`
+          if test -f "$collect2name" && \
+            strings "$collect2name" | grep resolve_lib_name >/dev/null
+          then
+            # We have reworked collect2
+            :
+          else
+            # We have old collect2
+            hardcode_direct=unsupported
+            hardcode_minus_L=yes
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_libdir_separator=
+          fi
+          ;;
+        esac
+      fi
+      # Begin _LT_AC_SYS_LIBPATH_AIX.
+      echo 'int main () { return 0; }' > conftest.c
+      ${CC} ${LDFLAGS} conftest.c -o conftest
+      aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+      if test -z "$aix_libpath"; then
+        aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+      fi
+      if test -z "$aix_libpath"; then
+        aix_libpath="/usr/lib:/lib"
+      fi
+      rm -f conftest.c conftest
+      # End _LT_AC_SYS_LIBPATH_AIX.
+      if test "$aix_use_runtimelinking" = yes; then
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+      else
+        if test "$host_cpu" = ia64; then
+          hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+        else
+          hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        fi
+      fi
+      ;;
+    amigaos*)
+      case "$host_cpu" in
+        powerpc)
+          ;;
+        m68k)
+          hardcode_libdir_flag_spec='-L$libdir'
+          hardcode_minus_L=yes
+          ;;
+      esac
+      ;;
+    bsdi[45]*)
+      ;;
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      libext=lib
+      ;;
+    darwin* | rhapsody*)
+      hardcode_direct=no
+      if { case $cc_basename in ifort*) true;; *) test "$GCC" = yes;; esac; }; then
+        :
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    dgux*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    freebsd2.[01]*)
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    freebsd* | dragonfly*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    hpux9*)
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      ;;
+    hpux10*)
+      if test "$with_gnu_ld" = no; then
+        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator=:
+        hardcode_direct=yes
+        # hardcode_minus_L: Not really in the search PATH,
+        # but as the default location of the library.
+        hardcode_minus_L=yes
+      fi
+      ;;
+    hpux11*)
+      if test "$with_gnu_ld" = no; then
+        hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator=:
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct=no
+            ;;
+          *)
+            hardcode_direct=yes
+            # hardcode_minus_L: Not really in the search PATH,
+            # but as the default location of the library.
+            hardcode_minus_L=yes
+            ;;
+        esac
+      fi
+      ;;
+    irix5* | irix6* | nonstopux*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    netbsd*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      ;;
+    newsos6)
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    *nto* | *qnx*)
+      ;;
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+        hardcode_direct=yes
+        if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+          hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+        else
+          case "$host_os" in
+            openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+              hardcode_libdir_flag_spec='-R$libdir'
+              ;;
+            *)
+              hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+              ;;
+          esac
+        fi
+      else
+        ld_shlibs=no
+      fi
+      ;;
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      ;;
+    osf3*)
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+    osf4* | osf5*)
+      if test "$GCC" = yes; then
+        hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+        # Both cc and cxx compiler support -rpath directly
+        hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      hardcode_libdir_separator=:
+      ;;
+    solaris*)
+      hardcode_libdir_flag_spec='-R$libdir'
+      ;;
+    sunos4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      ;;
+    sysv4)
+      case $host_vendor in
+        sni)
+          hardcode_direct=yes # is this really true???
+          ;;
+        siemens)
+          hardcode_direct=no
+          ;;
+        motorola)
+          hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+          ;;
+      esac
+      ;;
+    sysv4.3*)
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+        ld_shlibs=yes
+      fi
+      ;;
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      ;;
+    sysv5* | sco3.2v5* | sco5v6*)
+      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+      hardcode_libdir_separator=':'
+      ;;
+    uts4*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      ;;
+    *)
+      ld_shlibs=no
+      ;;
+  esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's _LT_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec=      # the last element of library_names_spec in libtool.m4
+libname_spec='lib$name'
+case "$host_os" in
+  aix3*)
+    library_names_spec='$libname.a'
+    ;;
+  aix[4-9]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  amigaos*)
+    case "$host_cpu" in
+      powerpc*)
+        library_names_spec='$libname$shrext' ;;
+      m68k)
+        library_names_spec='$libname.a' ;;
+    esac
+    ;;
+  beos*)
+    library_names_spec='$libname$shrext'
+    ;;
+  bsdi[45]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  cygwin* | mingw* | pw32* | cegcc*)
+    shrext=.dll
+    library_names_spec='$libname.dll.a $libname.lib'
+    ;;
+  darwin* | rhapsody*)
+    shrext=.dylib
+    library_names_spec='$libname$shrext'
+    ;;
+  dgux*)
+    library_names_spec='$libname$shrext'
+    ;;
+  freebsd[23].*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  freebsd* | dragonfly*)
+    library_names_spec='$libname$shrext'
+    ;;
+  gnu*)
+    library_names_spec='$libname$shrext'
+    ;;
+  haiku*)
+    library_names_spec='$libname$shrext'
+    ;;
+  hpux9* | hpux10* | hpux11*)
+    case $host_cpu in
+      ia64*)
+        shrext=.so
+        ;;
+      hppa*64*)
+        shrext=.sl
+        ;;
+      *)
+        shrext=.sl
+        ;;
+    esac
+    library_names_spec='$libname$shrext'
+    ;;
+  interix[3-9]*)
+    library_names_spec='$libname$shrext'
+    ;;
+  irix5* | irix6* | nonstopux*)
+    library_names_spec='$libname$shrext'
+    case "$host_os" in
+      irix5* | nonstopux*)
+        libsuff= shlibsuff=
+        ;;
+      *)
+        case $LD in
+          *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+          *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+          *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+          *) libsuff= shlibsuff= ;;
+        esac
+        ;;
+    esac
+    ;;
+  linux*oldld* | linux*aout* | linux*coff*)
+    ;;
+  linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    library_names_spec='$libname$shrext'
+    ;;
+  knetbsd*-gnu)
+    library_names_spec='$libname$shrext'
+    ;;
+  netbsd*)
+    library_names_spec='$libname$shrext'
+    ;;
+  newsos6)
+    library_names_spec='$libname$shrext'
+    ;;
+  *nto* | *qnx*)
+    library_names_spec='$libname$shrext'
+    ;;
+  openbsd*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  os2*)
+    libname_spec='$name'
+    shrext=.dll
+    library_names_spec='$libname.a'
+    ;;
+  osf3* | osf4* | osf5*)
+    library_names_spec='$libname$shrext'
+    ;;
+  rdos*)
+    ;;
+  solaris*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sunos4*)
+    library_names_spec='$libname$shrext$versuffix'
+    ;;
+  sysv4 | sysv4.3*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sysv4*MP*)
+    library_names_spec='$libname$shrext'
+    ;;
+  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+    library_names_spec='$libname$shrext'
+    ;;
+  tpf*)
+    library_names_spec='$libname$shrext'
+    ;;
+  uts4*)
+    library_names_spec='$libname$shrext'
+    ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
diff -Naurp dpkg-1.20.7.1-orig/build-aux/config.sub dpkg-1.20.7.1/build-aux/config.sub
--- dpkg-1.20.7.1-orig/build-aux/config.sub	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/build-aux/config.sub	2021-06-09 18:23:00.557295871 -0500
@@ -0,0 +1,1801 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright 1992-2018 Free Software Foundation, Inc.
+
+timestamp='2018-03-08'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program.  This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
+
+Canonicalize a configuration name.
+
+Options:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2018 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo "$1"
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
+  kopensolaris*-gnu* | cloudabi*-eabi* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  android-linux)
+    os=-linux-android
+    basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+    ;;
+  *)
+    basic_machine=`echo "$1" | sed 's/-[^-]*$//'`
+    if [ "$basic_machine" != "$1" ]
+    then os=`echo "$1" | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray | -microblaze*)
+		os=
+		basic_machine=$1
+		;;
+	-bluegene*)
+		os=-cnk
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+	-chorusrdb)
+		os=-chorusrdb
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*178)
+		os=-lynxos178
+		;;
+	-lynx*5)
+		os=-lynxos5
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| aarch64 | aarch64_be \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arceb \
+	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+	| avr | avr32 \
+	| ba \
+	| be32 | be64 \
+	| bfin \
+	| c4x | c8051 | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| e2k | epiphany \
+	| fido | fr30 | frv | ft32 \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
+	| i370 | i860 | i960 | ia16 | ia64 \
+	| ip2k | iq2000 \
+	| k1om \
+	| le32 | le64 \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64octeon | mips64octeonel \
+	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa32r6 | mipsisa32r6el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64r6 | mipsisa64r6el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipsr5900 | mipsr5900el \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| moxie \
+	| mt \
+	| msp430 \
+	| nds32 | nds32le | nds32be \
+	| nios | nios2 | nios2eb | nios2el \
+	| ns16k | ns32k \
+	| open8 | or1k | or1knd | or32 \
+	| pdp10 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| pru \
+	| pyramid \
+	| riscv32 | riscv64 \
+	| rl78 | rx \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| visium \
+	| wasm32 \
+	| x86 | xc16x | xstormy16 | xtensa \
+	| z8k | z80)
+		basic_machine=$basic_machine-unknown
+		;;
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	leon|leon[3-9])
+		basic_machine=sparc-$basic_machine
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65)
+		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
+
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+	xgate)
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| aarch64-* | aarch64_be-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* | avr32-* \
+	| ba-* \
+	| be32-* | be64-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+	| c8051-* | clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| e2k-* | elxsi-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
+	| i*86-* | i860-* | i960-* | ia16-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| k1om-* \
+	| le32-* | le64-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+	| microblaze-* | microblazeel-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64octeon-* | mips64octeonel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa32r6-* | mipsisa32r6el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64r6-* | mipsisa64r6el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipsr5900-* | mipsr5900el-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
+	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
+	| nios-* | nios2-* | nios2eb-* | nios2el-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
+	| or1k*-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| pru-* \
+	| pyramid-* \
+	| riscv32-* | riscv64-* \
+	| rl78-* | romp-* | rs6000-* | rx-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
+	| tron-* \
+	| ubicom32-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
+	| visium-* \
+	| wasm32-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
+	| xstormy16-* | xtensa*-* \
+	| ymp-* \
+	| z8k-* | z80-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-pc
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
+	asmjs)
+		basic_machine=asmjs-unknown
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
+	c54x-*)
+		basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16 | cr16-*)
+		basic_machine=cr16-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2*)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	e500v[12])
+		basic_machine=powerpc-unknown
+		os=$os"spe"
+		;;
+	e500v[12]-*)
+		basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		os=$os"spe"
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+	i*86v32)
+		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	leon-*|leon[3-9]-*)
+		basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'`
+		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	microblaze*)
+		basic_machine=microblaze-xilinx
+		;;
+	mingw64)
+		basic_machine=x86_64-pc
+		os=-mingw64
+		;;
+	mingw32)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	moxiebox)
+		basic_machine=moxie-unknown
+		os=-moxiebox
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	ms1-*)
+		basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'`
+		;;
+	msys)
+		basic_machine=i686-pc
+		os=-msys
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next)
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	nsv-tandem)
+		basic_machine=nsv-tandem
+		;;
+	nsx-tandem)
+		basic_machine=nsx-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc | ppcbe)	basic_machine=powerpc-unknown
+		;;
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rdos | rdos64)
+		basic_machine=x86_64-pc
+		os=-rdos
+		;;
+	rdos32)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tile*)
+		basic_machine=$basic_machine-unknown
+		os=-linux-gnu
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	x64)
+		basic_machine=x86_64-pc
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'`
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+	# First match some system type aliases that might get confused
+	# with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# es1800 is here to avoid being matched by es* (a different OS)
+	-es1800*)
+		os=-ose
+		;;
+	# Now accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST end in a * to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* | -plan9* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* | -aros* | -cloudabi* | -sortix* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* | -hcos* \
+	      | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \
+	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
+	      | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \
+	      | -midnightbsd*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -xray | -os68k* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo "$os" | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo "$os" | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo "$os" | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2)
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-dicos*)
+		os=-dicos
+		;;
+	-pikeos*)
+		# Until real need of OS specific support for
+		# particular features comes up, bare metal
+		# configurations are quite functional.
+		case $basic_machine in
+		    arm*)
+			os=-eabi
+			;;
+		    *)
+			os=-elf
+			;;
+		esac
+		;;
+	-nacl*)
+		;;
+	-ios)
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	score-*)
+		os=-elf
+		;;
+	spu-*)
+		os=-elf
+		;;
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	c8051-*)
+		os=-elf
+		;;
+	hexagon-*)
+		os=-elf
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mep-*)
+		os=-elf
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	pru-*)
+		os=-elf
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next)
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-cnk*|-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo "$basic_machine$os"
+exit
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff -Naurp dpkg-1.20.7.1-orig/build-aux/depcomp dpkg-1.20.7.1/build-aux/depcomp
--- dpkg-1.20.7.1-orig/build-aux/depcomp	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/build-aux/depcomp	2021-06-09 18:23:01.022296598 -0500
@@ -0,0 +1,791 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputting dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'.  On the theory
+## that the space means something, we add a space to the output as
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like '#:fec' to the end of the
+    # dependency line.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
+    echo >> "$depfile"
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  set_dir_from "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  set_dir_from  "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
+    sed -ne '2,${
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
+
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
+
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for ':'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+  "$@" $dashmflag |
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+        set fnord "$@"
+        shift
+        shift
+        ;;
+    *)
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff -Naurp dpkg-1.20.7.1-orig/build-aux/install-sh dpkg-1.20.7.1/build-aux/install-sh
--- dpkg-1.20.7.1-orig/build-aux/install-sh	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/build-aux/install-sh	2021-06-09 18:23:00.558295872 -0500
@@ -0,0 +1,518 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2018-03-11.20; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+tab='	'
+nl='
+'
+IFS=" $tab$nl"
+
+# Set DOITPROG to "echo" to test this script.
+
+doit=${DOITPROG-}
+doit_exec=${doit:-exec}
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+is_target_a_directory=possibly
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
+
+    -o) chowncmd="$chownprog $2"
+        shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
+
+    -T) is_target_a_directory=never;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --) shift
+        break;;
+
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename.
+    if test -d "$dst"; then
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
+      fi
+      dstdir=$dst
+      dstbase=`basename "$src"`
+      case $dst in
+	*/) dst=$dst$dstbase;;
+	*)  dst=$dst/$dstbase;;
+      esac
+      dstdir_status=0
+    else
+      dstdir=`dirname "$dst"`
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  case $dstdir in
+    */) dstdirslash=$dstdir;;
+    *)  dstdirslash=$dstdir/;;
+  esac
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *[2367][2367]) mkdir_umask=$umask;;
+          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+          *[0-7])
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
+
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+        case $umask in
+          *[123567][0-7][0-7])
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            # Note that $RANDOM variable is not portable (e.g. dash);  Use it
+            # here however when possible just to lower collision chance.
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+
+            trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            # Because "mkdir -p" follows existing symlinks and we likely work
+            # directly in world-writeable /tmp, make sure that the '$tmpdir'
+            # directory is successfully created first before we actually test
+            # 'mkdir -p' feature.
+            if (umask $mkdir_umask &&
+                $mkdirprog $mkdir_mode "$tmpdir" &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   test_tmpdir="$tmpdir/a"
+                   ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
+      esac
+
+      oIFS=$IFS
+      IFS=/
+      set -f
+      set fnord $dstdir
+      shift
+      set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+        test X"$d" = X && continue
+
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask=$mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=${dstdirslash}_inst.$$_
+    rmtmp=${dstdirslash}_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       set +f &&
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
+
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff -Naurp dpkg-1.20.7.1-orig/build-aux/ltmain.sh dpkg-1.20.7.1/build-aux/ltmain.sh
--- dpkg-1.20.7.1-orig/build-aux/ltmain.sh	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/build-aux/ltmain.sh	2021-06-09 18:22:56.556289610 -0500
@@ -0,0 +1,11147 @@
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+##               by inline-source v2014-01-03.01
+
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.6
+package_revision=2.4.6
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+#   . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
+fi
+
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test set = \"\${$_G_var+set}\"; then
+          save_$_G_var=\$$_G_var
+          $_G_var=C
+	  export $_G_var
+	  _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+	  _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
+	fi"
+done
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp	$nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+    test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+    _G_progs_list=$1
+    _G_check_func=$2
+    _G_PATH=${3-"$PATH"}
+
+    _G_path_prog_max=0
+    _G_path_prog_found=false
+    _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+    for _G_dir in $_G_PATH; do
+      IFS=$_G_save_IFS
+      test -z "$_G_dir" && _G_dir=.
+      for _G_prog_name in $_G_progs_list; do
+        for _exeext in '' .EXE; do
+          _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+          func_executable_p "$_G_path_prog" || continue
+          case `"$_G_path_prog" --version 2>&1` in
+            *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+            *)     $_G_check_func $_G_path_prog
+		   func_path_progs_result=$func_check_prog_result
+		   ;;
+          esac
+          $_G_path_prog_found && break 3
+        done
+      done
+    done
+    IFS=$_G_save_IFS
+    test -z "$func_path_progs_result" && {
+      echo "no acceptable sed could be found in \$PATH" >&2
+      exit 1
+    }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+  _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+  for _G_i in 1 2 3 4 5 6 7; do
+    _G_sed_script=$_G_sed_script$nl$_G_sed_script
+  done
+  echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+  _G_sed_script=
+
+  func_check_prog_sed ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo '' >> conftest.nl
+      "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+  rm -f conftest.sed
+  SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+  func_check_prog_grep ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    _G_path_prog_max=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo 'GREP' >> conftest.nl
+      "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+  GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables.  These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
+
+: ${CP="cp -f"}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+
+
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same.  If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion.  Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'.  '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+  s/$_G_bs4/&\\
+/g
+  s/^$_G_bs2$_G_dollar/$_G_bs&/
+  s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+  s/\n//g"
+
+
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
+
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+#    debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
+
+# By convention, finish your script with:
+#
+#    exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
+
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
+
+# Make sure we have an absolute progpath for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
+     progdir=`cd "$progdir" && pwd`
+     progpath=$progdir/$progname
+     ;;
+  *)
+     _G_IFS=$IFS
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS=$_G_IFS
+       test -x "$progdir/$progname" && break
+     done
+     IFS=$_G_IFS
+     test -n "$progdir" || progdir=`pwd`
+     progpath=$progdir/$progname
+     ;;
+esac
+
+
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
+
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
+
+opt_dry_run=false
+opt_quiet=false
+opt_verbose=false
+
+# Categories 'all' and 'none' are always available.  Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
+
+# By default, display warnings according to 'opt_warning_types'.  Set
+# 'warning_func'  to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
+
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
+
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+    $debug_cmd
+
+    test -t 1 && {
+      # COLORTERM and USE_ANSI_COLORS environment variables take
+      # precedence, because most terminfo databases neglect to describe
+      # whether color sequences are supported.
+      test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+      if test 1 = "$USE_ANSI_COLORS"; then
+        # Standard ANSI escape sequences
+        tc_reset='[0m'
+        tc_bold='[1m';   tc_standout='[7m'
+        tc_red='[31m';   tc_green='[32m'
+        tc_blue='[34m';  tc_cyan='[36m'
+      else
+        # Otherwise trust the terminfo database after all.
+        test -n "`tput sgr0 2>/dev/null`" && {
+          tc_reset=`tput sgr0`
+          test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+          tc_standout=$tc_bold
+          test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+          test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+          test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+          test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+          test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+        }
+      fi
+    }
+
+    require_term_colors=:
+}
+
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+  # We should try to minimise forks, especially on Windows where they are
+  # unreasonably slow, so skip the feature probes when bash or zsh are
+  # being used:
+  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+    : ${_G_HAVE_ARITH_OP="yes"}
+    : ${_G_HAVE_XSI_OPS="yes"}
+    # The += operator was introduced in bash 3.1
+    case $BASH_VERSION in
+      [12].* | 3.0 | 3.0*) ;;
+      *)
+        : ${_G_HAVE_PLUSEQ_OP="yes"}
+        ;;
+    esac
+  fi
+
+  # _G_HAVE_PLUSEQ_OP
+  # Can be empty, in which case the shell is probed, "yes" if += is
+  # useable or anything else if it does not work.
+  test -z "$_G_HAVE_PLUSEQ_OP" \
+    && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+    && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_append ()
+  {
+    $debug_cmd
+
+    eval "$1+=\$2"
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_append ()
+  {
+    $debug_cmd
+
+    eval "$1=\$$1\$2"
+  }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+  eval 'func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1+=\\ \$func_quote_for_eval_result"
+  }'
+else
+  func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1=\$$1\\ \$func_quote_for_eval_result"
+  }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE.  For example:
+#
+#   func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+    $debug_cmd
+
+    eval _G_current_value='`$ECHO $'$1'`'
+    _G_delim=`expr "$2" : '\(.\)'`
+
+    case $_G_delim$_G_current_value$_G_delim in
+      *"$2$_G_delim"*) ;;
+      *) func_append "$@" ;;
+    esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+  test -z "$_G_HAVE_ARITH_OP" \
+    && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+    && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+  eval 'func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=$(( $* ))
+  }'
+else
+  func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=`expr "$@"`
+  }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  # If this shell supports suffix pattern removal, then use it to avoid
+  # forking. Hide the definitions single quotes in case the shell chokes
+  # on unsupported syntax...
+  _b='func_basename_result=${1##*/}'
+  _d='case $1 in
+        */*) func_dirname_result=${1%/*}$2 ;;
+        *  ) func_dirname_result=$3        ;;
+      esac'
+
+else
+  # ...otherwise fall back to using sed.
+  _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+  _d='func_dirname_result=`$ECHO "$1"  |$SED "$sed_dirname"`
+      if test "X$func_dirname_result" = "X$1"; then
+        func_dirname_result=$3
+      else
+        func_append func_dirname_result "$2"
+      fi'
+fi
+
+eval 'func_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+    $debug_cmd
+
+    '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+    '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    _G_infix=$1; shift
+    _G_indent=$_G_infix
+    _G_prefix="$progname: $_G_infix: "
+    _G_message=$*
+
+    # Strip color escape sequences before counting printable length
+    for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+    do
+      test -n "$_G_tc" && {
+        _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+        _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+      }
+    done
+    _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`"  " ## exclude from sc_prohibit_nested_quotes
+
+    func_echo_infix_1_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_infix_1_IFS
+      $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+      _G_prefix=$_G_indent
+    done
+    IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    func_echo_infix_1 "  $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    $debug_cmd
+
+    func_error "$*"
+    exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $debug_cmd
+
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+  test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=${#1}
+  }'
+else
+  func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+  }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    $debug_cmd
+
+    _G_directory_path=$1
+    _G_dir_list=
+
+    if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+      # Protect directory names starting with '-'
+      case $_G_directory_path in
+        -*) _G_directory_path=./$_G_directory_path ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$_G_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        _G_dir_list=$_G_directory_path:$_G_dir_list
+
+        # If the last portion added has no slash in it, the list is done
+        case $_G_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
+      done
+      _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
+
+      func_mkdir_p_IFS=$IFS; IFS=:
+      for _G_dir in $_G_dir_list; do
+	IFS=$func_mkdir_p_IFS
+        # mkdir can fail with a 'File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$_G_dir" 2>/dev/null || :
+      done
+      IFS=$func_mkdir_p_IFS
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$_G_directory_path" || \
+        func_fatal_error "Failed to create '$1'"
+    fi
+}
+
+
+# func_mktempdir [BASENAME]
+# -------------------------
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, BASENAME is the basename for that directory.
+func_mktempdir ()
+{
+    $debug_cmd
+
+    _G_template=${TMPDIR-/tmp}/${1-$progname}
+
+    if test : = "$opt_dry_run"; then
+      # Return a directory name, but don't create it in dry-run mode
+      _G_tmpdir=$_G_template-$$
+    else
+
+      # If mktemp works, use that first and foremost
+      _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$_G_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        _G_tmpdir=$_G_template-${RANDOM-0}$$
+
+        func_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$_G_tmpdir"
+        umask $func_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$_G_tmpdir" || \
+        func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+    fi
+
+    $ECHO "$_G_tmpdir"
+}
+
+
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
+{
+    $debug_cmd
+
+    # These SED scripts presuppose an absolute path with a trailing slash.
+    _G_pathcar='s|^/\([^/]*\).*$|\1|'
+    _G_pathcdr='s|^/[^/]*||'
+    _G_removedotparts=':dotsl
+		s|/\./|/|g
+		t dotsl
+		s|/\.$|/|'
+    _G_collapseslashes='s|/\{1,\}|/|g'
+    _G_finalslash='s|/*$|/|'
+
+    # Start from root dir and reassemble the path.
+    func_normal_abspath_result=
+    func_normal_abspath_tpath=$1
+    func_normal_abspath_altnamespace=
+    case $func_normal_abspath_tpath in
+      "")
+        # Empty path, that just means $cwd.
+        func_stripname '' '/' "`pwd`"
+        func_normal_abspath_result=$func_stripname_result
+        return
+        ;;
+      # The next three entries are used to spot a run of precisely
+      # two leading slashes without using negated character classes;
+      # we take advantage of case's first-match behaviour.
+      ///*)
+        # Unusual form of absolute path, do nothing.
+        ;;
+      //*)
+        # Not necessarily an ordinary path; POSIX reserves leading '//'
+        # and for example Cygwin uses it to access remote file shares
+        # over CIFS/SMB, so we conserve a leading double slash if found.
+        func_normal_abspath_altnamespace=/
+        ;;
+      /*)
+        # Absolute path, do nothing.
+        ;;
+      *)
+        # Relative path, prepend $cwd.
+        func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+        ;;
+    esac
+
+    # Cancel out all the simple stuff to save iterations.  We also want
+    # the path to end with a slash for ease of parsing, so make sure
+    # there is one (and only one) here.
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+    while :; do
+      # Processed it all yet?
+      if test / = "$func_normal_abspath_tpath"; then
+        # If we ascended to the root using ".." the result may be empty now.
+        if test -z "$func_normal_abspath_result"; then
+          func_normal_abspath_result=/
+        fi
+        break
+      fi
+      func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcar"`
+      func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcdr"`
+      # Figure out what to do with it
+      case $func_normal_abspath_tcomponent in
+        "")
+          # Trailing empty path component, ignore it.
+          ;;
+        ..)
+          # Parent dir; strip last assembled component from result.
+          func_dirname "$func_normal_abspath_result"
+          func_normal_abspath_result=$func_dirname_result
+          ;;
+        *)
+          # Actual path component, append it.
+          func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+          ;;
+      esac
+    done
+    # Restore leading double-slash if one was found on entry.
+    func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+    $debug_cmd
+
+    $opt_quiet || func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+    $debug_cmd
+
+    func_relative_path_result=
+    func_normal_abspath "$1"
+    func_relative_path_tlibdir=$func_normal_abspath_result
+    func_normal_abspath "$2"
+    func_relative_path_tbindir=$func_normal_abspath_result
+
+    # Ascend the tree starting from libdir
+    while :; do
+      # check if we have found a prefix of bindir
+      case $func_relative_path_tbindir in
+        $func_relative_path_tlibdir)
+          # found an exact match
+          func_relative_path_tcancelled=
+          break
+          ;;
+        $func_relative_path_tlibdir*)
+          # found a matching prefix
+          func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+          func_relative_path_tcancelled=$func_stripname_result
+          if test -z "$func_relative_path_result"; then
+            func_relative_path_result=.
+          fi
+          break
+          ;;
+        *)
+          func_dirname $func_relative_path_tlibdir
+          func_relative_path_tlibdir=$func_dirname_result
+          if test -z "$func_relative_path_tlibdir"; then
+            # Have to descend all the way to the root!
+            func_relative_path_result=../$func_relative_path_result
+            func_relative_path_tcancelled=$func_relative_path_tbindir
+            break
+          fi
+          func_relative_path_result=../$func_relative_path_result
+          ;;
+      esac
+    done
+
+    # Now calculate path; take care to avoid doubling-up slashes.
+    func_stripname '' '/' "$func_relative_path_result"
+    func_relative_path_result=$func_stripname_result
+    func_stripname '/' '/' "$func_relative_path_tcancelled"
+    if test -n "$func_stripname_result"; then
+      func_append func_relative_path_result "/$func_stripname_result"
+    fi
+
+    # Normalisation. If bindir is libdir, return '.' else relative path.
+    if test -n "$func_relative_path_result"; then
+      func_stripname './' '' "$func_relative_path_result"
+      func_relative_path_result=$func_stripname_result
+    fi
+
+    test -n "$func_relative_path_result" || func_relative_path_result=.
+
+    :
+}
+
+
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+#   i) func_quote_for_eval_result
+#      double-quoted, suitable for a subsequent eval
+#  ii) func_quote_for_eval_unquoted_result
+#      has all characters that are still active within double
+#      quotes backslashified.
+func_quote_for_eval ()
+{
+    $debug_cmd
+
+    func_quote_for_eval_unquoted_result=
+    func_quote_for_eval_result=
+    while test 0 -lt $#; do
+      case $1 in
+        *[\\\`\"\$]*)
+	  _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+        *)
+          _G_unquoted_arg=$1 ;;
+      esac
+      if test -n "$func_quote_for_eval_unquoted_result"; then
+	func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+      else
+        func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+      fi
+
+      case $_G_unquoted_arg in
+        # Double-quote args containing shell metacharacters to delay
+        # word splitting, command substitution and variable expansion
+        # for a subsequent eval.
+        # Many Bourne shells cannot handle close brackets correctly
+        # in scan sets, so we specify it separately.
+        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+          _G_quoted_arg=\"$_G_unquoted_arg\"
+          ;;
+        *)
+          _G_quoted_arg=$_G_unquoted_arg
+	  ;;
+      esac
+
+      if test -n "$func_quote_for_eval_result"; then
+	func_append func_quote_for_eval_result " $_G_quoted_arg"
+      else
+        func_append func_quote_for_eval_result "$_G_quoted_arg"
+      fi
+      shift
+    done
+}
+
+
+# func_quote_for_expand ARG
+# -------------------------
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    $debug_cmd
+
+    case $1 in
+      *[\\\`\"]*)
+	_G_arg=`$ECHO "$1" | $SED \
+	    -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        _G_arg=$1 ;;
+    esac
+
+    case $_G_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        _G_arg=\"$_G_arg\"
+        ;;
+    esac
+
+    func_quote_for_expand_result=$_G_arg
+}
+
+
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_stripname ()
+  {
+    $debug_cmd
+
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary variable first.
+    func_stripname_result=$3
+    func_stripname_result=${func_stripname_result#"$1"}
+    func_stripname_result=${func_stripname_result%"$2"}
+  }'
+else
+  func_stripname ()
+  {
+    $debug_cmd
+
+    case $2 in
+      .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+      *)  func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+    esac
+  }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    func_quote_for_expand "$_G_cmd"
+    eval "func_notquiet $func_quote_for_expand_result"
+
+    $opt_dry_run || {
+      eval "$_G_cmd"
+      _G_status=$?
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
+      fi
+    }
+}
+
+
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    $opt_quiet || {
+      func_quote_for_expand "$_G_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    $opt_dry_run || {
+      eval "$_G_user_locale
+	    $_G_cmd"
+      _G_status=$?
+      eval "$_G_safe_locale"
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
+      fi
+    }
+}
+
+
+# func_tr_sh
+# ----------
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+    $debug_cmd
+
+    case $1 in
+    [0-9]* | *[!a-zA-Z0-9_]*)
+      func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+      ;;
+    * )
+      func_tr_sh_result=$1
+      ;;
+    esac
+}
+
+
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $debug_cmd
+
+    $opt_verbose && func_echo "$*"
+
+    :
+}
+
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+    $debug_cmd
+
+    # CATEGORY must be in the warning_categories list!
+    case " $warning_categories " in
+      *" $1 "*) ;;
+      *) func_internal_error "invalid warning category '$1'" ;;
+    esac
+
+    _G_category=$1
+    shift
+
+    case " $opt_warning_types " in
+      *" $_G_category "*) $warning_func ${1+"$@"} ;;
+    esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+    $debug_cmd
+
+    printf '%s\n%s\n' "$1" "$2" \
+      | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false.  Use it like this:
+#
+#  func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+    $debug_cmd
+
+    test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+#   #!/bin/sh
+#   . relative/path/to/funclib.sh
+#   . relative/path/to/options-parser
+#   scriptversion=1.0
+#   func_options ${1+"$@"}
+#   eval set dummy "$func_options_result"; shift
+#   ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'.  Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+       --debug        enable verbose shell tracing
+   -W, --warnings=CATEGORY
+                      report the warnings falling in CATEGORY [all]
+   -v, --verbose      verbosely report processing
+       --version      print version information and exit
+   -h, --help         print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+       'all'          show all warnings
+       'none'         turn off all the warnings
+       'error'        warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code.  A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+    $debug_cmd
+
+    func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns.  FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not accept hook functions." ;;
+    esac
+
+    eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+    $debug_cmd
+
+    eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+    esac
+
+    eval _G_hook_fns=\$$1_hooks; shift
+
+    for _G_hook in $_G_hook_fns; do
+      eval $_G_hook '"$@"'
+
+      # store returned options list back into positional
+      # parameters for next 'cmd' execution.
+      eval _G_hook_result=\$${_G_hook}_result
+      eval set dummy "$_G_hook_result"; shift
+    done
+
+    func_quote_for_eval ${1+"$@"}
+    func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'.  Like this:
+#
+#    my_options_prep ()
+#    {
+#        $debug_cmd
+#
+#        # Extend the existing usage message.
+#        usage_message=$usage_message'
+#      -s, --silent       don'\''t print informational messages
+#    '
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_options_prep_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_options_prep my_options_prep
+#
+#
+#    my_silent_option ()
+#    {
+#        $debug_cmd
+#
+#        # Note that for efficiency, we parse as many options as we can
+#        # recognise in a loop before passing the remainder back to the
+#        # caller on the first unrecognised argument we encounter.
+#        while test $# -gt 0; do
+#          opt=$1; shift
+#          case $opt in
+#            --silent|-s) opt_silent=: ;;
+#            # Separate non-argument short options:
+#            -s*)         func_split_short_opt "$_G_opt"
+#                         set dummy "$func_split_short_opt_name" \
+#                             "-$func_split_short_opt_arg" ${1+"$@"}
+#                         shift
+#                         ;;
+#            *)            set dummy "$_G_opt" "$*"; shift; break ;;
+#          esac
+#        done
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_silent_option_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_parse_options my_silent_option
+#
+#
+#    my_option_validation ()
+#    {
+#        $debug_cmd
+#
+#        $opt_silent && $opt_verbose && func_fatal_help "\
+#    '--silent' and '--verbose' options are mutually exclusive."
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_option_validation_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse.  It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+    $debug_cmd
+
+    func_options_prep ${1+"$@"}
+    eval func_parse_options \
+        ${func_options_prep_result+"$func_options_prep_result"}
+    eval func_validate_options \
+        ${func_parse_options_result+"$func_parse_options_result"}
+
+    eval func_run_hooks func_options \
+        ${func_validate_options_result+"$func_validate_options_result"}
+
+    # save modified positional parameters for caller
+    func_options_result=$func_run_hooks_result
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters.  If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+    $debug_cmd
+
+    # Option defaults:
+    opt_verbose=false
+    opt_warning_types=
+
+    func_run_hooks func_options_prep ${1+"$@"}
+
+    # save modified positional parameters for caller
+    func_options_prep_result=$func_run_hooks_result
+}
+
+
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+    $debug_cmd
+
+    func_parse_options_result=
+
+    # this just eases exit handling
+    while test $# -gt 0; do
+      # Defer to hook functions for initial option parsing, so they
+      # get priority in the event of reusing an option name.
+      func_run_hooks func_parse_options ${1+"$@"}
+
+      # Adjust func_parse_options positional parameters to match
+      eval set dummy "$func_run_hooks_result"; shift
+
+      # Break out of the loop if we already parsed every option.
+      test $# -gt 0 || break
+
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --debug|-x)   debug_cmd='set -x'
+                      func_echo "enabling shell trace mode"
+                      $debug_cmd
+                      ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                      set dummy --warnings none ${1+"$@"}
+                      shift
+		      ;;
+
+        --warnings|--warning|-W)
+                      test $# = 0 && func_missing_arg $_G_opt && break
+                      case " $warning_categories $1" in
+                        *" $1 "*)
+                          # trailing space prevents matching last $1 above
+                          func_append_uniq opt_warning_types " $1"
+                          ;;
+                        *all)
+                          opt_warning_types=$warning_categories
+                          ;;
+                        *none)
+                          opt_warning_types=none
+                          warning_func=:
+                          ;;
+                        *error)
+                          opt_warning_types=$warning_categories
+                          warning_func=func_fatal_error
+                          ;;
+                        *)
+                          func_fatal_error \
+                             "unsupported warning category: '$1'"
+                          ;;
+                      esac
+                      shift
+                      ;;
+
+        --verbose|-v) opt_verbose=: ;;
+        --version)    func_version ;;
+        -\?|-h)       func_usage ;;
+        --help)       func_help ;;
+
+	# Separate optargs to long options (plugins may need this):
+	--*=*)        func_split_equals "$_G_opt"
+	              set dummy "$func_split_equals_lhs" \
+                          "$func_split_equals_rhs" ${1+"$@"}
+                      shift
+                      ;;
+
+       # Separate optargs to short options:
+        -W*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        # Separate non-argument short options:
+        -\?*|-h*|-v*|-x*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "-$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        --)           break ;;
+        -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
+        *)            set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+      esac
+    done
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    func_parse_options_result=$func_quote_for_eval_result
+}
+
+
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+    $debug_cmd
+
+    # Display all warnings if -W was not given.
+    test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+    func_run_hooks func_validate_options ${1+"$@"}
+
+    # Bail if the options were screwed!
+    $exit_cmd $EXIT_FAILURE
+
+    # save modified positional parameters for caller
+    func_validate_options_result=$func_run_hooks_result
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    eval \$ECHO \""$fatal_help"\"
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
+func_help ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message"
+    exit 0
+}
+
+
+# func_missing_arg ARGNAME
+# ------------------------
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $debug_cmd
+
+    func_error "Missing argument for '$1'."
+    exit_cmd=exit
+}
+
+
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=${1%%=*}
+      func_split_equals_rhs=${1#*=}
+      test "x$func_split_equals_lhs" = "x$1" \
+        && func_split_equals_rhs=
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+      func_split_equals_rhs=
+      test "x$func_split_equals_lhs" = "x$1" \
+        || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+  }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_arg=${1#??}
+      func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+      func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+  }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+    exit 0
+}
+
+
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    echo
+    $SED -n 's|^# ||
+        /^Written by/{
+          x;p;x
+        }
+	h
+	/^Written by/q' < "$progpath"
+    echo
+    eval \$ECHO \""$usage_message"\"
+}
+
+
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $debug_cmd
+
+    printf '%s\n' "$progname $scriptversion"
+    $SED -n '
+        /(C)/!b go
+        :more
+        /\./!{
+          N
+          s|\n# | |
+          b more
+        }
+        :go
+        /^# Written by /,/# warranty; / {
+          s|^# ||
+          s|^# *$||
+          s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+          p
+        }
+        /^# Written by / {
+          s|^# ||
+          p
+        }
+        /^warranty; /q' < "$progpath"
+
+    exit $?
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
+
+
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
+
+
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
+{
+    $debug_cmd
+
+    $warning_func ${1+"$@"}
+}
+
+
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+       --config             show all configuration variables
+       --debug              enable verbose shell tracing
+   -n, --dry-run            display commands without modifying any files
+       --features           display basic configuration information and exit
+       --mode=MODE          use operation mode MODE
+       --no-warnings        equivalent to '-Wnone'
+       --preserve-dup-deps  don't remove duplicate dependency libraries
+       --quiet, --silent    don't print informational messages
+       --tag=TAG            use configuration variables from tag TAG
+   -v, --verbose            print more informational messages than default
+       --version            print version information
+   -W, --warnings=CATEGORY  report the warnings falling in CATEGORY [all]
+   -h, --help, --help-all   print short, long, or detailed help message
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+       clean           remove files from the build directory
+       compile         compile a source file into a libtool object
+       execute         automatically set library path, then run a program
+       finish          complete the installation of libtool libraries
+       install         install libraries or executables
+       link            create a library or an executable
+       uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+       host-triplet:   $host
+       shell:          $SHELL
+       compiler:       $LTCC
+       compiler flags: $LTCFLAGS
+       linker:         $LD (gnu? $with_gnu_ld)
+       version:        $progname (GNU libtool) 2.4.6
+       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+    exit 0
+}
+
+
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_lo2o ()
+  {
+    case $1 in
+      *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+      *   ) func_lo2o_result=$1               ;;
+    esac
+  }'
+
+  # func_xform LIBOBJ-OR-SOURCE
+  # ---------------------------
+  # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+  # suffix to a '.lo' libtool-object suffix.
+  eval 'func_xform ()
+  {
+    func_xform_result=${1%.*}.lo
+  }'
+else
+  # ...otherwise fall back to using sed.
+  func_lo2o ()
+  {
+    func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+  }
+
+  func_xform ()
+  {
+    func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+  }
+fi
+
+
+# func_fatal_configuration ARG...
+# -------------------------------
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func__fatal_error ${1+"$@"} \
+      "See the $PACKAGE documentation for more information." \
+      "Fatal configuration error."
+}
+
+
+# func_config
+# -----------
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
+
+    exit $?
+}
+
+
+# func_features
+# -------------
+# Display the features supported by this script.
+func_features ()
+{
+    echo "host: $host"
+    if test yes = "$build_libtool_libs"; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test yes = "$build_old_libs"; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+
+    exit $?
+}
+
+
+# func_enable_tag TAGNAME
+# -----------------------
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+    # Global variable:
+    tagname=$1
+
+    re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+    re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+    sed_extractcf=/$re_begincf/,/$re_endcf/p
+
+    # Validate tagname.
+    case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+        func_fatal_error "invalid tag name: $tagname"
+        ;;
+    esac
+
+    # Don't test for the "default" C tag, as we know it's
+    # there but not specially marked.
+    case $tagname in
+        CC) ;;
+    *)
+        if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	  taglist="$taglist $tagname"
+
+	  # Evaluate the configuration.  Be careful to quote the path
+	  # and the sed script, to avoid splitting on whitespace, but
+	  # also don't use non-portable quotes within backquotes within
+	  # quotes we have to do it in 2 steps:
+	  extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	  eval "$extractedcf"
+        else
+	  func_error "ignoring unknown tag $tagname"
+        fi
+        ;;
+    esac
+}
+
+
+# func_check_version_match
+# ------------------------
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+    if test "$package_revision" != "$macro_revision"; then
+      if test "$VERSION" != "$macro_version"; then
+        if test -z "$macro_version"; then
+          cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+        else
+          cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+        fi
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+      fi
+
+      exit $EXIT_MISMATCH
+    fi
+}
+
+
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+    $debug_mode
+
+    # Option defaults:
+    opt_config=false
+    opt_dlopen=
+    opt_dry_run=false
+    opt_help=false
+    opt_mode=
+    opt_preserve_dup_deps=false
+    opt_quiet=false
+
+    nonopt=
+    preserve_args=
+
+    # Shorthand for --mode=foo, only valid as the first argument
+    case $1 in
+    clean|clea|cle|cl)
+      shift; set dummy --mode clean ${1+"$@"}; shift
+      ;;
+    compile|compil|compi|comp|com|co|c)
+      shift; set dummy --mode compile ${1+"$@"}; shift
+      ;;
+    execute|execut|execu|exec|exe|ex|e)
+      shift; set dummy --mode execute ${1+"$@"}; shift
+      ;;
+    finish|finis|fini|fin|fi|f)
+      shift; set dummy --mode finish ${1+"$@"}; shift
+      ;;
+    install|instal|insta|inst|ins|in|i)
+      shift; set dummy --mode install ${1+"$@"}; shift
+      ;;
+    link|lin|li|l)
+      shift; set dummy --mode link ${1+"$@"}; shift
+      ;;
+    uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+      shift; set dummy --mode uninstall ${1+"$@"}; shift
+      ;;
+    esac
+
+    # Pass back the list of options.
+    func_quote_for_eval ${1+"$@"}
+    libtool_options_prep_result=$func_quote_for_eval_result
+}
+func_add_hook func_options_prep libtool_options_prep
+
+
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+    $debug_cmd
+
+    # Perform our own loop to consume as many options as possible in
+    # each iteration.
+    while test $# -gt 0; do
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --dry-run|--dryrun|-n)
+                        opt_dry_run=:
+                        ;;
+
+        --config)       func_config ;;
+
+        --dlopen|-dlopen)
+                        opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+                        shift
+                        ;;
+
+        --preserve-dup-deps)
+                        opt_preserve_dup_deps=: ;;
+
+        --features)     func_features ;;
+
+        --finish)       set dummy --mode finish ${1+"$@"}; shift ;;
+
+        --help)         opt_help=: ;;
+
+        --help-all)     opt_help=': help-all' ;;
+
+        --mode)         test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_mode=$1
+                        case $1 in
+                          # Valid mode arguments:
+                          clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+                          # Catch anything else as an error
+                          *) func_error "invalid argument for $_G_opt"
+                             exit_cmd=exit
+                             break
+                             ;;
+                        esac
+                        shift
+                        ;;
+
+        --no-silent|--no-quiet)
+                        opt_quiet=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                        opt_warning=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-verbose)
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --silent|--quiet)
+                        opt_quiet=:
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --tag)          test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_tag=$1
+                        func_append preserve_args " $_G_opt $1"
+                        func_enable_tag "$1"
+                        shift
+                        ;;
+
+        --verbose|-v)   opt_quiet=false
+                        opt_verbose=:
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+	# An option not handled by this hook function:
+        *)		set dummy "$_G_opt" ${1+"$@"};	shift; break  ;;
+      esac
+    done
+
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
+
+
+
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+    # save first non-option argument
+    if test 0 -lt $#; then
+      nonopt=$1
+      shift
+    fi
+
+    # preserve --debug
+    test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+    case $host in
+      # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+      # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+      *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+        # don't eliminate duplications in $postdeps and $predeps
+        opt_duplicate_compiler_generated_deps=:
+        ;;
+      *)
+        opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+        ;;
+    esac
+
+    $opt_help || {
+      # Sanity checks first:
+      func_check_version_match
+
+      test yes != "$build_libtool_libs" \
+        && test yes != "$build_old_libs" \
+        && func_fatal_configuration "not configured to build any kind of library"
+
+      # Darwin sucks
+      eval std_shrext=\"$shrext_cmds\"
+
+      # Only execute mode is allowed to have -dlopen flags.
+      if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+        func_error "unrecognized option '-dlopen'"
+        $ECHO "$help" 1>&2
+        exit $EXIT_FAILURE
+      fi
+
+      # Change the help message to a mode-specific one.
+      generic_help=$help
+      help="Try '$progname --help --mode=$opt_mode' for more information."
+    }
+
+    # Pass back the unparsed argument list
+    func_quote_for_eval ${1+"$@"}
+    libtool_validate_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_validate_options libtool_validate_options
+
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+  $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if 'file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case $lalib_p_line in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test yes = "$lalib_p"
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    test -f "$1" &&
+      $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $debug_cmd
+
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$sp$nl
+      eval cmd=\"$cmd\"
+      IFS=$save_ifs
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# 'FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $debug_cmd
+
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case $lt_sysroot:$1 in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result='='$func_stripname_result
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $debug_cmd
+
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	func_append_quoted CC_quoted "$arg"
+      done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_append_quoted CC_quoted "$arg"
+	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+	    case "$@ " in
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with '--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=$1
+    if test yes = "$build_libtool_libs"; then
+      write_lobj=\'$2\'
+    else
+      write_lobj=none
+    fi
+
+    if test yes = "$build_old_libs"; then
+      write_oldobj=\'$3\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "$write_libobj"
+    }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $debug_cmd
+
+  func_convert_core_file_wine_to_w32_result=$1
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $debug_cmd
+
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result"; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $debug_cmd
+
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $debug_cmd
+
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $debug_cmd
+
+  if test -z "$2" && test -n "$1"; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  '$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result=$1
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $debug_cmd
+
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  '$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result=$3
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $debug_cmd
+
+  case $4 in
+  $1 ) func_to_host_path_result=$3$func_to_host_path_result
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via '$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $debug_cmd
+
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $debug_cmd
+
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result=$1
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result=$func_convert_core_msys_to_w32_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result=$func_cygpath_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result=$func_cygpath_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via '$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $debug_cmd
+
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd=func_convert_path_$func_stripname_result
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $debug_cmd
+
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result=$1
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result=$func_convert_core_msys_to_w32_result
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result=$func_cygpath_result
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result=$func_cygpath_result
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+  $debug_cmd
+
+  func_dll_def_p_tmp=`$SED -n \
+    -e 's/^[	 ]*//' \
+    -e '/^\(;.*\)*$/d' \
+    -e 's/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p' \
+    -e q \
+    "$1"`
+  test DEF = "$func_dll_def_p_tmp"
+}
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $debug_cmd
+
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile=$nonopt  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg=$arg
+	arg_mode=normal
+	;;
+
+      target )
+	libobj=$arg
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify '-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          func_append pie_flag " $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  func_append later " $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs=$IFS; IFS=,
+	  for arg in $args; do
+	    IFS=$save_ifs
+	    func_append_quoted lastarg "$arg"
+	  done
+	  IFS=$save_ifs
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+
+	  # Add the arguments to base_compile.
+	  func_append base_compile " $lastarg"
+	  continue
+	  ;;
+
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg=$srcfile
+	  srcfile=$arg
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      func_append_quoted base_compile "$lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      func_fatal_error "you must specify an argument for -Xcompile"
+      ;;
+    target)
+      func_fatal_error "you must specify a target with '-o'"
+      ;;
+    *)
+      # Get the name of the library object.
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj=$func_basename_result
+      }
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    case $libobj in
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
+    esac
+
+    case $libobj in
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+    *)
+      func_fatal_error "cannot determine name of library object from '$libobj'"
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -shared)
+	test yes = "$build_libtool_libs" \
+	  || func_fatal_configuration "cannot build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name '$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname=$func_basename_result
+    xdir=$func_dirname_result
+    lobj=$xdir$objdir/$objname
+
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
+
+    # Delete any leftover library objects.
+    if test yes = "$build_old_libs"; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
+      pic_mode=default
+      ;;
+    esac
+    if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test no = "$compiler_c_o"; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+      lockfile=$output_obj.lock
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test yes = "$need_locks"; then
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test warn = "$need_locks"; then
+      if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+      func_append removelist " $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
+    fi
+
+    $opt_dry_run || $RM $removelist
+    func_append removelist " $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test yes = "$build_libtool_libs"; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test no != "$pic_mode"; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      func_mkdir_p "$xdir$objdir"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	func_append command " -o $lobj"
+      fi
+
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+      if test warn = "$need_locks" &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+
+      # Allow error messages only from the first compilation.
+      if test yes = "$suppress_opt"; then
+	suppress_output=' >/dev/null 2>&1'
+      fi
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test yes = "$build_old_libs"; then
+      if test yes != "$pic_mode"; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test yes = "$compiler_c_o"; then
+	func_append command " -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      func_append command "$suppress_output"
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+      if test warn = "$need_locks" &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test no != "$need_locks"; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+  test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $opt_mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
+  -shared           do not build a '.o' file suitable for static linking
+  -static           only build a '.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to '-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the '--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the 'install' or 'cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
+  -dlopen FILE      '-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  use a list of object files found in FILE to specify objects
+  -os2dllname NAME  force a short DLL name on OS/2 (no effect on other OSes)
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with '-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in '.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
+
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode '$opt_mode'"
+        ;;
+    esac
+
+    echo
+    $ECHO "Try '$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test : = "$opt_help"; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | $SED -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    $SED '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $debug_cmd
+
+    # The first argument is the command name.
+    cmd=$nonopt
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $opt_dlopen; do
+      test -f "$file" \
+	|| func_fatal_help "'$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "'$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "'$file' was not linked with '-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir=$func_dirname_result
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  func_append dir "/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir=$func_dirname_result
+	;;
+
+      *)
+	func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir=$absdir
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic=$magic
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -* | *.la | *.lo ) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file=$progdir/$program
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file=$progdir/$program
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_append_quoted args "$file"
+    done
+
+    if $opt_dry_run; then
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    else
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd=\$cmd$args
+    fi
+}
+
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $debug_cmd
+
+    libs=
+    libdirs=
+    admincmds=
+
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
+
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "'$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument '$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and '=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    $opt_quiet && exit $EXIT_SUCCESS
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the '-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the '$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the '$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
+
+	$ECHO "   - use the '$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
+      fi
+      echo
+
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
+    exit $EXIT_SUCCESS
+}
+
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $debug_cmd
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
+       # Allow the use of GNU shtool's install command.
+       case $nonopt in *shtool*) :;; *) false;; esac
+    then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=false
+    stripme=
+    no_mode=:
+    for arg
+    do
+      arg2=
+      if test -n "$dest"; then
+	func_append files " $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=: ;;
+      -f)
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  if test X-m = "X$prev" && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the '$prev' option requires an argument"
+
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=:
+    if $isdir; then
+      destdir=$dest
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir=$func_dirname_result
+      destname=$func_basename_result
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "'$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "'$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic=$magic
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	func_append staticlibs " $file"
+	;;
+
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "'$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append current_libdirs " $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append future_libdirs " $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir=$func_dirname_result
+	func_append dir "$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking '$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname=$1
+	  shift
+
+	  srcname=$realname
+	  test -n "$relink_command" && srcname=${realname}T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme=$stripme
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  os2*)
+	    case $realname in
+	    *_dll.a)
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try 'ln -sf' first, because the 'ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib=$destdir/$realname
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name=$func_basename_result
+	instname=$dir/${name}i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile=$destdir/$destname
+	else
+	  func_basename "$file"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest=$destfile
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to '$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test yes = "$build_old_libs"; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile=$destdir/$destname
+	else
+	  func_basename "$file"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=.exe
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script '$wrapper'"
+
+	  finalize=:
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "'$lib' has not been installed in '$libdir'"
+	      finalize=false
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test no = "$fast_install" && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if $finalize; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file=$func_basename_result
+	        outputname=$tmpdir/$file
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_quiet || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink '$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file=$outputname
+	      else
+	        func_warning "cannot relink '$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name=$func_basename_result
+
+      # Set up the ranlib parameters.
+      oldlib=$destdir/$name
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run '$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $debug_cmd
+
+    my_outputname=$1
+    my_originator=$2
+    my_pic_p=${3-false}
+    my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms=${my_outputname}S.c
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist=$output_objdir/$my_outputname.nm
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test yes = "$dlself"; then
+	  func_verbose "generating symbol list for '$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols=$output_objdir/$outputname.exp
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin* | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from '$dlprefile'"
+	  func_basename "$dlprefile"
+	  name=$func_basename_result
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname"; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename=$func_basename_result
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename"; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  func_show_eval '$RM "${nlist}I"'
+	  if test -n "$global_symbol_to_import"; then
+	    eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+	  fi
+
+	  echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+  LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+  for (; symbol->name; ++symbol)
+    {"
+	    $SED 's/.*/      if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+	    echo >> "$output_objdir/$my_dlsyms" "\
+    }
+}"
+	  fi
+	  echo >> "$output_objdir/$my_dlsyms" "\
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{ {\"$my_originator\", (void *) 0},"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+  {\"@INIT@\", (void *) &lt_syminit},"
+	  fi
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  echo >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    $my_pic_p && pic_flag_for_symtable=" $pic_flag"
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) func_append symtab_cflags " $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj=$output_objdir/${my_outputname}S.$objext
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for '$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+  $debug_cmd
+
+  win32_libid_type=unknown
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      case $nm_interface in
+      "MS dumpbin")
+	if func_cygming_ms_implib_p "$1" ||
+	   func_cygming_gnu_implib_p "$1"
+	then
+	  win32_nmres=import
+	else
+	  win32_nmres=
+	fi
+	;;
+      *)
+	func_to_tool_file "$1" func_convert_file_msys_to_w32
+	win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	  $SED -n -e '
+	    1,100{
+		/ I /{
+		    s|.*|import|
+		    p
+		    q
+		}
+	    }'`
+	;;
+      esac
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $debug_cmd
+
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $debug_cmd
+
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive that possess that section. Heuristic: eliminate
+    # all those that have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $debug_cmd
+
+  if func_cygming_gnu_implib_p "$1"; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1"; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=
+  fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $debug_cmd
+
+    f_ex_an_ar_dir=$1; shift
+    f_ex_an_ar_oldlib=$1
+    if test yes = "$lock_old_archive_extraction"; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test yes = "$lock_old_archive_extraction"; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $debug_cmd
+
+    my_gentop=$1; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=
+    my_xlib=
+    my_xabs=
+    my_xdir=
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib=$func_basename_result
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir=$my_gentop/$my_xlib_u
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  func_basename "$darwin_archive"
+	  darwin_base_archive=$func_basename_result
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches; do
+	      func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+	      cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      func_extract_an_archive "`pwd`" "$darwin_base_archive"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+    done
+
+    func_extract_archives_result=$my_oldobjs
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory where it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=${1-no}
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ that is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options that match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+  done
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test yes = "$fast_install"; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	\$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	# Export our shlibpath_var if we have one.
+	if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+      func_exec_program \${1+\"\$@\"}
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+*/
+EOF
+	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* declarations of non-ANSI functions */
+#if defined __MINGW32__
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined __CYGWIN__
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined other_platform || defined ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined _MSC_VER
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+#elif defined __MINGW32__
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined __CYGWIN__
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined other platforms ... */
+#endif
+
+#if defined PATH_MAX
+# define LT_PATHMAX PATH_MAX
+#elif defined MAXPATHLEN
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+  defined __OS2__
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free (stale); stale = 0; } \
+} while (0)
+
+#if defined LT_DEBUGWRAPPER
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+	    cat <<EOF
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_path "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_path "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test yes = "$fast_install"; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  int rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  newargz = XMALLOC (char *, (size_t) argc + 1);
+
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (STREQ (argv[i], dumpscript_opt))
+	{
+EOF
+	    case $host in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  lt_dump_script (stdout);
+	  return 0;
+	}
+      if (STREQ (argv[i], debug_opt))
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (STREQ (argv[i], ltwrapper_option_prefix))
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
+  for (i = 0; i < newargc; i++)
+    {
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
+  rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  size_t tmp_len;
+  char *concat_name;
+
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = (size_t) (q - p);
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (STREQ (str, pat))
+	*str = '\0';
+    }
+  return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    size_t len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      size_t orig_value_len = strlen (orig_value);
+      size_t add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      size_t len = strlen (new_value);
+      while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[--len] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $debug_cmd
+
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+    $debug_cmd
+
+    case " $compile_command " in
+    *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+      suncc_use_cstd_abi=no
+      ;;
+    *)
+      suncc_use_cstd_abi=yes
+      ;;
+    esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $debug_cmd
+
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # what system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll that has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    bindir=
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    os2dllname=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=false
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module=$wl-single_module
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test yes != "$build_libtool_libs" \
+	  && func_fatal_configuration "cannot build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg=$1
+      shift
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	bindir)
+	  bindir=$arg
+	  prev=
+	  continue
+	  ;;
+	dlfiles|dlprefiles)
+	  $preload || {
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=:
+	  }
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test no = "$dlself"; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test dlprefiles = "$prev"; then
+	      dlself=yes
+	    elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test dlfiles = "$prev"; then
+	      func_append dlfiles " $arg"
+	    else
+	      func_append dlprefiles " $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols=$arg
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file '$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex=$arg
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir=$arg
+	  prev=
+	  continue
+	  ;;
+	mllvm)
+	  # Clang does not use LLVM to link, so we can simply discard any
+	  # '-mllvm $arg' options when doing the link step.
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      func_append moreargs " $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		func_source "$arg"
+
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test none = "$pic_object" &&
+		   test none = "$non_pic_object"; then
+		  func_fatal_error "cannot find name of object for '$arg'"
+		fi
+
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir=$func_dirname_result
+
+		if test none != "$pic_object"; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object=$xdir$pic_object
+
+		  if test dlfiles = "$prev"; then
+		    if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+		      func_append dlfiles " $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test dlprefiles = "$prev"; then
+		    # Preload the old-style object.
+		    func_append dlprefiles " $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg=$pic_object
+		fi
+
+		# Non-PIC object.
+		if test none != "$non_pic_object"; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object=$xdir$non_pic_object
+
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test none = "$pic_object"; then
+		    arg=$non_pic_object
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object=$pic_object
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir=$func_dirname_result
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "'$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file '$arg' does not exist"
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	os2dllname)
+	  os2dllname=$arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex=$arg
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release=-$arg
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
+	  esac
+	  if test rpath = "$prev"; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) func_append rpath " $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) func_append xrpath " $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds=$arg
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  func_append weak_libs " $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg=$arg
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "'-allow-undefined' must not be used because it is the default"
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test X-export-symbols = "X$arg"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework)
+	prev=framework
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between '-L' and '$1'"
+	  else
+	    func_fatal_error "need path for '-L' option"
+	  fi
+	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of '$dir'"
+	  dir=$absdir
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
+	*)
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) func_append dllsearchpath ":$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test X-lc = "X$arg" || test X-lm = "X$arg"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    func_append deplibs " System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  esac
+	elif test X-lc_r = "X$arg"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	func_append deplibs " $arg"
+	continue
+	;;
+
+      -mllvm)
+	prev=mllvm
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
+
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
+	esac
+	continue
+	;;
+
+      -multi_module)
+	single_module=$wl-multi_module
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "'-no-install' is ignored for $host"
+	  func_warning "assuming '-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -os2dllname)
+	prev=os2dllname
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) func_append xrpath " $dir" ;;
+	esac
+	continue
+	;;
+
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -weak)
+        prev=weak
+	continue
+	;;
+
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs=$IFS; IFS=,
+	for flag in $args; do
+	  IFS=$save_ifs
+          func_quote_for_eval "$flag"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
+	done
+	IFS=$save_ifs
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs=$IFS; IFS=,
+	for flag in $args; do
+	  IFS=$save_ifs
+          func_quote_for_eval "$flag"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
+	done
+	IFS=$save_ifs
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # -fstack-protector*   stack protector flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -stdlib=*            select c++ std lib with clang
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
+        func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        func_append compiler_flags " $arg"
+        continue
+        ;;
+
+      -Z*)
+        if test os2 = "`expr $host : '.*\(os2\)'`"; then
+          # OS/2 uses -Zxxx to specify OS/2-specific options
+	  compiler_flags="$compiler_flags $arg"
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  case $arg in
+	  -Zlinker | -Zstack)
+	    prev=xcompiler
+	    ;;
+	  esac
+	  continue
+        else
+	  # Otherwise treat like 'Some other compiler flag' below
+	  func_quote_for_eval "$arg"
+	  arg=$func_quote_for_eval_result
+        fi
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+
+      *.$objext)
+	# A standard object.
+	func_append objs " $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  func_source "$arg"
+
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test none = "$pic_object" &&
+	     test none = "$non_pic_object"; then
+	    func_fatal_error "cannot find name of object for '$arg'"
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir=$func_dirname_result
+
+	  test none = "$pic_object" || {
+	    # Prepend the subdirectory the object is found in.
+	    pic_object=$xdir$pic_object
+
+	    if test dlfiles = "$prev"; then
+	      if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+		func_append dlfiles " $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test dlprefiles = "$prev"; then
+	      # Preload the old-style object.
+	      func_append dlprefiles " $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg=$pic_object
+	  }
+
+	  # Non-PIC object.
+	  if test none != "$non_pic_object"; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object=$xdir$non_pic_object
+
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test none = "$pic_object"; then
+	      arg=$non_pic_object
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object=$pic_object
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir=$func_dirname_result
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "'$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	func_resolve_sysroot "$arg"
+	if test dlfiles = "$prev"; then
+	  # This library was specified with -dlopen.
+	  func_append dlfiles " $func_resolve_sysroot_result"
+	  prev=
+	elif test dlprefiles = "$prev"; then
+	  # The library was specified with -dlpreopen.
+	  func_append dlprefiles " $func_resolve_sysroot_result"
+	  prev=
+	else
+	  func_append deplibs " $func_resolve_sysroot_result"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
+
+    test -n "$prev" && \
+      func_fatal_help "the '$prevarg' option requires an argument"
+
+    if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname=$func_basename_result
+    libobjs_save=$libobjs
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    # Definition is injected by LT_CONFIG during libtool generation.
+    func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
+    func_dirname "$output" "/" ""
+    output_objdir=$func_dirname_result$objdir
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_preserve_dup_deps; then
+	case "$libs " in
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	esac
+      fi
+      func_append libs " $deplib"
+    done
+
+    if test lib = "$linkmode"; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+	  esac
+	  func_append pre_post_deps " $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=false
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test lib,link = "$linkmode,$pass"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs=$tmp_deplibs
+      fi
+
+      if test lib,link = "$linkmode,$pass" ||
+	 test prog,scan = "$linkmode,$pass"; then
+	libs=$deplibs
+	deplibs=
+      fi
+      if test prog = "$linkmode"; then
+	case $pass in
+	dlopen) libs=$dlfiles ;;
+	dlpreopen) libs=$dlprefiles ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test lib,dlpreopen = "$linkmode,$pass"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  func_resolve_sysroot "$lib"
+	  case $lib in
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) func_append deplibs " $deplib" ;;
+	    esac
+	  done
+	done
+	libs=$dlprefiles
+      fi
+      if test dlopen = "$pass"; then
+	# Collect dlpreopened libraries
+	save_deplibs=$deplibs
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=false
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	  if test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    func_append compiler_flags " $deplib"
+	    if test lib = "$linkmode"; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test lib != "$linkmode" && test prog != "$linkmode"; then
+	    func_warning "'-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test lib = "$linkmode"; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib=$searchdir/lib$name$search_ext
+	      if test -f "$lib"; then
+		if test .la = "$search_ext"; then
+		  found=:
+		else
+		  found=false
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if $found; then
+	    # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll=$l
+		  done
+		  if test "X$ll" = "X$old_library"; then # only static version available
+		    found=false
+		    func_dirname "$lib" "" "."
+		    ladir=$func_dirname_result
+		    lib=$ladir/$old_library
+		    if test prog,link = "$linkmode,$pass"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  else
+	    # deplib doesn't seem to be a libtool library
+	    if test prog,link = "$linkmode,$pass"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test lib = "$linkmode"; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test conv = "$pass" && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  prog)
+	    if test conv = "$pass"; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test scan = "$pass"; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  *)
+	    func_warning "'-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test link = "$pass"; then
+	    func_stripname '-R' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) func_append xrpath " $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
+	*.$libext)
+	  if test conv = "$pass"; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=false
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=:
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=:
+		;;
+	      esac
+	      if $valid_a_lib; then
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      else
+		echo
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test link != "$pass"; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test conv = "$pass"; then
+	    deplibs="$deplib $deplibs"
+	  elif test prog = "$linkmode"; then
+	    if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      func_append newdlprefiles " $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      func_append newdlfiles " $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=:
+	  continue
+	  ;;
+	esac # case $deplib
+
+	$found || test -f "$lib" \
+	  || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "'$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir=$func_dirname_result
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test lib,link = "$linkmode,$pass" ||
+	   test prog,scan = "$linkmode,$pass" ||
+	   { test prog != "$linkmode" && test lib != "$linkmode"; }; then
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+	fi
+
+	if test conv = "$pass"; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for '$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
+	  elif test prog != "$linkmode" && test lib != "$linkmode"; then
+	    func_fatal_error "'$lib' is not a convenience library"
+	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	if test -n "$old_library" &&
+	   { test yes = "$prefer_static_libs" ||
+	     test built,no = "$prefer_static_libs,$installed"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib=$l
+	  done
+	fi
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for '$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test dlopen = "$pass"; then
+	  test -z "$libdir" \
+	    && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
+	  if test -z "$dlname" ||
+	     test yes != "$dlopen_support" ||
+	     test no = "$build_libtool_libs"
+	  then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    func_append dlprefiles " $lib $dependency_libs"
+	  else
+	    func_append newdlfiles " $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of '$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir=$ladir
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname=$func_basename_result
+
+	# Find the relevant object directory and library name.
+	if test yes = "$installed"; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    func_warning "library '$lib' was moved."
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    libdir=$abs_ladir
+	  else
+	    dir=$lt_sysroot$libdir
+	    absdir=$lt_sysroot$libdir
+	  fi
+	  test yes = "$hardcode_automatic" && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  else
+	    dir=$ladir/$objdir
+	    absdir=$abs_ladir/$objdir
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test dlpreopen = "$pass"; then
+	  if test -z "$libdir" && test prog = "$linkmode"; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
+	  fi
+	  case $host in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test lib = "$linkmode"; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test prog = "$linkmode" && test link != "$pass"; then
+	  func_append newlib_search_path " $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=false
+	  if test no != "$link_all_deplibs" || test -z "$library_names" ||
+	     test no = "$build_libtool_libs"; then
+	    linkalldeplibs=:
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if $linkalldeplibs; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test prog,link = "$linkmode,$pass"; then
+	  if test -n "$library_names" &&
+	     { { test no = "$prefer_static_libs" ||
+	         test built,yes = "$prefer_static_libs,$installed"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
+	      # Make sure the rpath contains only unique directories.
+	      case $temp_rpath: in
+	      *"$absdir:"*) ;;
+	      *) func_append temp_rpath "$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if $alldeplibs &&
+	     { test pass_all = "$deplibs_check_method" ||
+	       { test yes = "$build_libtool_libs" &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test built = "$use_static_libs" && test yes = "$installed"; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test no = "$use_static_libs" || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc* | *os2*)
+	      # No point in relinking DLLs because paths are not encoded
+	      func_append notinst_deplibs " $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test no = "$installed"; then
+	      func_append notinst_deplibs " $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule=$dlpremoduletest
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
+	    echo
+	    if test prog = "$linkmode"; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test lib = "$linkmode" &&
+	     test yes = "$hardcode_into_libs"; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname=$1
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname=$dlname
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc* | *os2*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix=-$major
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname=$realname
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot=$soname
+	    func_basename "$soroot"
+	    soname=$func_basename_result
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from '$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for '$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test prog = "$linkmode" || test relink != "$opt_mode"; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test no = "$hardcode_direct"; then
+		add=$dir/$linklib
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+		  *-*-sysv4*uw2*) add_dir=-L$dir ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir=-L$dir ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we cannot
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library"; then
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
+			else
+			  add=$dir/$old_library
+			fi
+		      elif test -n "$old_library"; then
+			add=$dir/$old_library
+		      fi
+		    fi
+		esac
+	      elif test no = "$hardcode_minus_L"; then
+		case $host in
+		*-*-sunos*) add_shlibpath=$dir ;;
+		esac
+		add_dir=-L$dir
+		add=-l$name
+	      elif test no = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test yes = "$hardcode_direct" &&
+	         test no = "$hardcode_direct_absolute"; then
+		add=$dir/$linklib
+	      elif test yes = "$hardcode_minus_L"; then
+		add_dir=-L$absdir
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add=-l$name
+	      elif test yes = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test yes != "$lib_linked"; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test prog = "$linkmode"; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test yes != "$hardcode_direct" &&
+		 test yes != "$hardcode_minus_L" &&
+		 test yes = "$hardcode_shlibpath_var"; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test prog = "$linkmode" || test relink = "$opt_mode"; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test yes = "$hardcode_direct" &&
+	       test no = "$hardcode_direct_absolute"; then
+	      add=$libdir/$linklib
+	    elif test yes = "$hardcode_minus_L"; then
+	      add_dir=-L$libdir
+	      add=-l$name
+	    elif test yes = "$hardcode_shlibpath_var"; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
+	      esac
+	      add=-l$name
+	    elif test yes = "$hardcode_automatic"; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib"; then
+		add=$inst_prefix_dir$libdir/$linklib
+	      else
+		add=$libdir/$linklib
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir=-L$libdir
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add=-l$name
+	    fi
+
+	    if test prog = "$linkmode"; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test prog = "$linkmode"; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test unsupported != "$hardcode_direct"; then
+	    test -n "$old_library" && linklib=$old_library
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test yes = "$build_libtool_libs"; then
+	  # Not a shared library
+	  if test pass_all != "$deplibs_check_method"; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    $ECHO "*** Warning: This system cannot link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test yes = "$module"; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** 'nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test no = "$build_old_libs"; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test lib = "$linkmode"; then
+	  if test -n "$dependency_libs" &&
+	     { test yes != "$hardcode_into_libs" ||
+	       test yes = "$build_old_libs" ||
+	       test yes = "$link_static"; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) func_append xrpath " $temp_xrpath";;
+		   esac;;
+	      *) func_append temp_deplibs " $libdir";;
+	      esac
+	    done
+	    dependency_libs=$temp_deplibs
+	  fi
+
+	  func_append newlib_search_path " $absdir"
+	  # Link against this library
+	  test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $func_resolve_sysroot_result"
+	  done
+
+	  if test no != "$link_all_deplibs"; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path=$deplib ;;
+	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
+	        func_dirname "$deplib" "" "."
+		dir=$func_dirname_result
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of '$dir'"
+		    absdir=$dir
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names"; then
+		    for tmp in $deplibrary_names; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl"; then
+		      depdepl=$absdir/$objdir/$depdepl
+		      darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`$OTOOL64 -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+		      func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path=-L$absdir/$objdir
+		  ;;
+		esac
+		else
+		  eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "'$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "'$deplib' seems to be moved"
+
+		  path=-L$absdir
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test link = "$pass"; then
+	if test prog = "$linkmode"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs=$newdependency_libs
+      if test dlpreopen = "$pass"; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test dlopen != "$pass"; then
+	test conv = "$pass" || {
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) func_append lib_search_path " $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	}
+
+	if test prog,link = "$linkmode,$pass"; then
+	  vars="compile_deplibs finalize_deplibs"
+	else
+	  vars=deplibs
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) func_append tmp_libs " $deplib" ;;
+	      esac
+	      ;;
+	    *) func_append tmp_libs " $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+
+      # Add Sun CC postdeps if required:
+      test CXX = "$tagname" && {
+        case $host_os in
+        linux*)
+          case `$CC -V 2>&1 | sed 5q` in
+          *Sun\ C*) # Sun C++ 5.9
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+
+        solaris*)
+          func_cc_basename "$CC"
+          case $func_cc_basename_result in
+          CC* | sunCC*)
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+        esac
+      }
+
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=
+	  ;;
+	esac
+	if test -n "$i"; then
+	  func_append tmp_libs " $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test prog = "$linkmode"; then
+      dlfiles=$newdlfiles
+    fi
+    if test prog = "$linkmode" || test lib = "$linkmode"; then
+      dlprefiles=$newdlprefiles
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "'-l' and '-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "'-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "'-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "'-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "'-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs=$output
+      func_append objs "$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form 'libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test no = "$module" \
+	  && func_fatal_help "libtool library '$output' must begin with 'lib'"
+
+	if test no != "$need_lib_prefix"; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test pass_all != "$deplibs_check_method"; then
+	  func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
+	else
+	  echo
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  func_append libobjs " $objs"
+	fi
+      fi
+
+      test no = "$dlself" \
+	|| func_warning "'-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test 1 -lt "$#" \
+	&& func_warning "ignoring multiple '-rpath's for a libtool library"
+
+      install_libdir=$1
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test yes = "$build_libtool_libs"; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a '.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "'-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "'-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs=$IFS; IFS=:
+	set dummy $vinfo 0 0 0
+	shift
+	IFS=$save_ifs
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to '-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major=$1
+	  number_minor=$2
+	  number_revision=$3
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # that has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
+	  darwin|freebsd-elf|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age=$number_minor
+	    revision=$number_revision
+	    ;;
+	  freebsd-aout|qnx|sunos)
+	    current=$number_major
+	    revision=$number_minor
+	    age=0
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age=$number_minor
+	    revision=$number_minor
+	    lt_irix_increment=no
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current=$1
+	  revision=$2
+	  age=$3
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT '$current' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION '$revision' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE '$age' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE '$age' is greater than the current interface number '$current'"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+          # On Darwin other compilers
+          case $CC in
+              nagfor*)
+                  verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+                  ;;
+              *)
+                  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+                  ;;
+          esac
+	  ;;
+
+	freebsd-aout)
+	  major=.$current
+	  versuffix=.$current.$revision
+	  ;;
+
+	freebsd-elf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  ;;
+
+	irix | nonstopux)
+	  if test no = "$lt_irix_increment"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring=$verstring_prefix$major.$revision
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test 0 -ne "$loop"; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring=$verstring_prefix$major.$iface:$verstring
+	  done
+
+	  # Before this point, $major must not contain '.'.
+	  major=.$major
+	  versuffix=$major.$revision
+	  ;;
+
+	linux) # correct to gnu/linux during the next big refactor
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=.$current.$age.$revision
+	  verstring=$current.$age.$revision
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test 0 -ne "$loop"; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring=$verstring:$iface.0
+	  done
+
+	  # Make executables depend on our current version.
+	  func_append verstring ":$current.0"
+	  ;;
+
+	qnx)
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sco)
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sunos)
+	  major=.$current
+	  versuffix=.$current.$revision
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 file systems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix=-$major
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type '$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring=0.0
+	    ;;
+	  esac
+	  if test no = "$need_version"; then
+	    versuffix=
+	  else
+	    versuffix=.0.0
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test yes,no = "$avoid_version,$need_version"; then
+	  major=
+	  versuffix=
+	  verstring=
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test yes = "$allow_undefined"; then
+	  if test unsupported = "$allow_undefined_flag"; then
+	    if test yes = "$build_old_libs"; then
+	      func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+	      build_libtool_libs=no
+	    else
+	      func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+	    fi
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag=$no_undefined_flag
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" :
+      func_append libobjs " $symfileobj"
+      test " " = "$libobjs" && libobjs=
+
+      if test relink != "$opt_mode"; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+	       if test -n "$precious_files_regex"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       func_append removelist " $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
+	func_append oldlibs " $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+	if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles=$dlfiles
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) func_append dlfiles " $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles=$dlprefiles
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) func_append dlprefiles " $lib" ;;
+	esac
+      done
+
+      if test yes = "$build_libtool_libs"; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    func_append deplibs " System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test yes = "$build_libtool_need_lc"; then
+	      func_append deplibs " -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=
+	versuffix=
+	major=
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    func_append newdeplibs " $i"
+		    i=
+		    ;;
+		  esac
+		fi
+		if test -n "$i"; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		    func_append newdeplibs " $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      func_append newdeplibs " $i"
+		      i=
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i"; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		      func_append newdeplibs " $i"
+		    else
+		      droppeddeps=yes
+		      echo
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib"; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  if test yes = "$want_nocaseglob"; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib=$potent_lib
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+			*) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			func_append newdeplibs " $a_deplib"
+			a_deplib=
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib"; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib"; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib"; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib=$potent_lib # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      func_append newdeplibs " $a_deplib"
+		      a_deplib=
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib"; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib"; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	    for i in $predeps $postdeps; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
+	    done
+	  fi
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
+	    if test none = "$deplibs_check_method"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	    ;;
+	  esac
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test yes = "$droppeddeps"; then
+	  if test yes = "$module"; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** 'nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test no = "$build_old_libs"; then
+	      oldlibs=$output_objdir/$libname.$libext
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test no = "$allow_undefined"; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test no = "$build_old_libs"; then
+		oldlibs=$output_objdir/$libname.$libext
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      deplibs=$new_libs
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test yes = "$build_libtool_libs"; then
+	# Remove $wl instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
+	if test yes = "$hardcode_into_libs"; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath=$finalize_rpath
+	  test relink = "$opt_mode" || rpath=$compile_rpath$rpath
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs=$libdir
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		func_append dep_rpath " $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append perm_rpath " $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir=$hardcode_libdirs
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      func_append rpath "$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath=$finalize_shlibpath
+	test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname=$1
+	shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname=$realname
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib=$output_objdir/$realname
+	linknames=
+	for link
+	do
+	  func_append linknames " $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols=$output_objdir/$libname.uexp
+	  func_append delfiles " $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    func_dll_def_p "$export_symbols" || {
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols=$export_symbols
+	      export_symbols=
+	      always_export_symbols=yes
+	    }
+	  fi
+	  ;;
+	esac
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for '$libname.la'"
+	    export_symbols=$output_objdir/$libname.exp
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs=$IFS; IFS='~'
+	    for cmd1 in $cmds; do
+	      IFS=$save_ifs
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test yes = "$try_normal_branch" \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=$output_objdir/$output_la.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS=$save_ifs
+	    if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols=$export_symbols
+	  test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands, which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    func_append tmp_deplibs " $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs=$tmp_deplibs
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test yes = "$compiler_needs_object" &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop=$output_objdir/${outputname}x
+	    func_append generated " $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    func_append libobjs " $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	fi
+
+	if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  func_append linker_flags " $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test relink = "$opt_mode"; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test yes = "$module" && test -n "$module_cmds"; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
+	fi
+
+	if test : != "$skipped_export" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  func_basename "$output"
+	  output_la=$func_basename_result
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+	    output=$output_objdir/$output_la.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    echo 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
+	  elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+	    output=$output_objdir/$output_la.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test yes = "$compiler_needs_object"; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-$k.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test -z "$objlist" ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test 1 -eq "$k"; then
+		    # The first file doesn't have a previous command to add.
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-$k.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-$k.$objext
+		  objlist=" $obj"
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\$concat_cmds$reload_cmds\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	      func_append delfiles " $output"
+
+	    else
+	      output=
+	    fi
+
+	    ${skipped_export-false} && {
+	      func_verbose "generating symbol list for '$libname.la'"
+	      export_symbols=$output_objdir/$libname.exp
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    }
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs=$IFS; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS=$save_ifs
+	      $opt_quiet || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test relink = "$opt_mode"; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS=$save_ifs
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          ${skipped_export-false} && {
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols=$export_symbols
+	      test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands, which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  }
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test yes = "$module" && test -n "$module_cmds"; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
+	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append libobjs " $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
+
+	save_ifs=$IFS; IFS='~'
+	for cmd in $cmds; do
+	  IFS=$sp$nl
+	  eval cmd=\"$cmd\"
+	  IFS=$save_ifs
+	  $opt_quiet || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test relink = "$opt_mode"; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS=$save_ifs
+
+	# Restore the uninstalled library and exit
+	if test relink = "$opt_mode"; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test yes = "$module" || test yes = "$export_dynamic"; then
+	  # On all known operating systems, these are identical.
+	  dlname=$soname
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for objects"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "'-l' and '-L' are ignored for objects" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "'-rpath' is ignored for objects"
+
+      test -n "$xrpath" && \
+	func_warning "'-R' is ignored for objects"
+
+      test -n "$vinfo" && \
+	func_warning "'-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object '$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj=$output
+	;;
+      esac
+
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # if reload_cmds runs $LD directly, get rid of -Wl from
+      # whole_archive_flag_spec and hope we can get by with turning comma
+      # into space.
+      case $reload_cmds in
+        *\$LD[\ \$]*) wl= ;;
+      esac
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
+	else
+	  gentop=$output_objdir/${obj}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # If we're not building shared, we need to use non_pic_objs
+      test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
+
+      # Create the old-style object.
+      reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
+
+      output=$obj
+      func_execute_cmds "$reload_cmds" 'exit $?'
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      test yes = "$build_libtool_libs" || {
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      }
+
+      if test -n "$pic_flag" || test default != "$pic_mode"; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output=$libobj
+	func_execute_cmds "$reload_cmds" 'exit $?'
+      fi
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "'-version-info' is ignored for programs"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for programs"
+
+      $preload \
+	&& test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+	&& func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	;;
+      esac
+
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test CXX = "$tagname"; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      func_append compile_command " $wl-bind_at_load"
+	      func_append finalize_command " $wl-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      compile_deplibs=$new_libs
+
+
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs=$libdir
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append perm_rpath " $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) func_append dllsearchpath ":$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir=$hardcode_libdirs
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath=$rpath
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs=$libdir
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir=$hardcode_libdirs
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath=$rpath
+
+      if test -n "$libobjs" && test yes = "$build_old_libs"; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+      fi
+
+      func_generate_dlsyms "$outputname" "@PROGRAM@" false
+
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
+
+      wrappers_required=:
+      case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=false
+        ;;
+      *cygwin* | *mingw* )
+        test yes = "$build_libtool_libs" || wrappers_required=false
+        ;;
+      *)
+        if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+          wrappers_required=false
+        fi
+        ;;
+      esac
+      $wrappers_required || {
+	# Replace the output file specification.
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command=$compile_command$compile_rpath
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.$objext"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
+	fi
+
+	exit $exit_status
+      }
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test yes = "$no_install"; then
+	# We don't need to create a wrapper script.
+	link_command=$compile_var$compile_command$compile_rpath
+	# Replace the output file specification.
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      case $hardcode_action,$fast_install in
+        relink,*)
+	  # Fast installation is not supported
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+
+	  func_warning "this platform does not like uninstalled shared libraries"
+	  func_warning "'$output' will be relinked during installation"
+	  ;;
+        *,yes)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+          ;;
+	*,no)
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+          ;;
+	*,needless)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=
+          ;;
+      esac
+
+      # Replace the output file specification.
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      func_show_eval "$link_command" 'exit $?'
+
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
+      # Now create the wrapper script.
+      func_verbose "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource=$output_path/$objdir/lt-$output_name.c
+	    cwrapper=$output_path/$output_name.exe
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
+
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host"; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      case $build_libtool_libs in
+        convenience)
+	  oldobjs="$libobjs_save $symfileobj"
+	  addlibs=$convenience
+	  build_libtool_libs=no
+	  ;;
+	module)
+	  oldobjs=$libobjs_save
+	  addlibs=$old_convenience
+	  build_libtool_libs=no
+          ;;
+	*)
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  $preload && test -f "$symfileobj" \
+	    && func_append oldobjs " $symfileobj"
+	  addlibs=$old_convenience
+	  ;;
+      esac
+
+      if test -n "$addlibs"; then
+	gentop=$output_objdir/${outputname}x
+	func_append generated " $gentop"
+
+	func_extract_archives $gentop $addlibs
+	func_append oldobjs " $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
+	cmds=$old_archive_from_new_cmds
+      else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append oldobjs " $func_extract_archives_result"
+	fi
+
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  echo "copying selected object files to avoid basename conflicts..."
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase=$func_basename_result
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
+	      ;;
+	    *) func_append oldobjs " $obj" ;;
+	    esac
+	  done
+	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
+	eval cmds=\"$old_archive_cmds\"
+
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj"; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test -z "$oldobjs"; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
+    done
+
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test yes = "$build_old_libs" && old_library=$libname.$libext
+      func_verbose "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      if test yes = "$hardcode_automatic"; then
+	relink_command=
+      fi
+
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test yes = "$installed"; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output=$output_objdir/${outputname}i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name=$func_basename_result
+		func_resolve_sysroot "$deplib"
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		test -z "$libdir" && \
+		  func_fatal_error "'$deplib' is not a valid libtool archive"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
+	      esac
+	    done
+	    dependency_libs=$newdependency_libs
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "'$lib' is not a valid libtool archive"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      *) func_append newdlfiles " $lib" ;;
+	      esac
+	    done
+	    dlfiles=$newdlfiles
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "'$lib' is not a valid libtool archive"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles=$newdlprefiles
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlfiles " $abs"
+	    done
+	    dlfiles=$newdlfiles
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlprefiles " $abs"
+	    done
+	    dlprefiles=$newdlprefiles
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test -n "$bindir"; then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result/$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that cannot go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test no,yes = "$installed,$need_relink"; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
+
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+  func_mode_link ${1+"$@"}
+fi
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $debug_cmd
+
+    RM=$nonopt
+    files=
+    rmforce=false
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic=$magic
+
+    for arg
+    do
+      case $arg in
+      -f) func_append RM " $arg"; rmforce=: ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
+      esac
+    done
+
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
+
+    rmdirs=
+
+    for file in $files; do
+      func_dirname "$file" "" "."
+      dir=$func_dirname_result
+      if test . = "$dir"; then
+	odir=$objdir
+      else
+	odir=$dir/$objdir
+      fi
+      func_basename "$file"
+      name=$func_basename_result
+      test uninstall = "$opt_mode" && odir=$dir
+
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test clean = "$opt_mode"; then
+	case " $rmdirs " in
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif $rmforce; then
+	continue
+      fi
+
+      rmfiles=$file
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    func_append rmfiles " $odir/$n"
+	  done
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+	  case $opt_mode in
+	  clean)
+	    case " $library_names " in
+	    *" $dlname "*) ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+	    esac
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if func_lalib_p "$file"; then
+
+	  # Read the .lo file
+	  func_source $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" && test none != "$pic_object"; then
+	    func_append rmfiles " $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" && test none != "$non_pic_object"; then
+	    func_append rmfiles " $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test clean = "$opt_mode"; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    func_append rmfiles " $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+	    if test yes = "$fast_install" && test -n "$relink_command"; then
+	      func_append rmfiles " $odir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name"; then
+	      func_append rmfiles " $odir/lt-$noexename.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
+    done
+
+    # Try to remove the $objdir's in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
+      fi
+    done
+
+    exit $exit_status
+}
+
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+  func_mode_uninstall ${1+"$@"}
+fi
+
+test -z "$opt_mode" && {
+  help=$generic_help
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode '$opt_mode'"
+
+if test -n "$exec_cmd"; then
+  eval exec "$exec_cmd"
+  exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# where we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff -Naurp dpkg-1.20.7.1-orig/build-aux/missing dpkg-1.20.7.1/build-aux/missing
--- dpkg-1.20.7.1-orig/build-aux/missing	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/build-aux/missing	2021-06-09 18:23:00.558295872 -0500
@@ -0,0 +1,215 @@
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try '$0 --help' for more information"
+  exit 1
+fi
+
+case $1 in
+
+  --is-lightweight)
+    # Used by our autoconf macros to check whether the available missing
+    # script is modern enough.
+    exit 0
+    ;;
+
+  --run)
+    # Back-compat with the calling convention used by older automake.
+    shift
+    ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+
+Supported PROGRAM values:
+  aclocal   autoconf  autoheader   autom4te  automake  makeinfo
+  bison     yacc      flex         lex       help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: unknown '$1' option"
+    echo 1>&2 "Try '$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch.  This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+  msg="probably too old"
+elif test $st -eq 127; then
+  # Program was missing.
+  msg="missing on your system"
+else
+  # Program was found and executed, but failed.  Give up.
+  exit $st
+fi
+
+perl_URL=https://www.perl.org/
+flex_URL=https://github.com/westes/flex
+gnu_software_URL=https://www.gnu.org/software
+
+program_details ()
+{
+  case $1 in
+    aclocal|automake)
+      echo "The '$1' program is part of the GNU Automake package:"
+      echo "<$gnu_software_URL/automake>"
+      echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/autoconf>"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+    autoconf|autom4te|autoheader)
+      echo "The '$1' program is part of the GNU Autoconf package:"
+      echo "<$gnu_software_URL/autoconf/>"
+      echo "It also requires GNU m4 and Perl in order to run:"
+      echo "<$gnu_software_URL/m4/>"
+      echo "<$perl_URL>"
+      ;;
+  esac
+}
+
+give_advice ()
+{
+  # Normalize program name to check for.
+  normalized_program=`echo "$1" | sed '
+    s/^gnu-//; t
+    s/^gnu//; t
+    s/^g//; t'`
+
+  printf '%s\n' "'$1' is $msg."
+
+  configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+  case $normalized_program in
+    autoconf*)
+      echo "You should only need it if you modified 'configure.ac',"
+      echo "or m4 files included by it."
+      program_details 'autoconf'
+      ;;
+    autoheader*)
+      echo "You should only need it if you modified 'acconfig.h' or"
+      echo "$configure_deps."
+      program_details 'autoheader'
+      ;;
+    automake*)
+      echo "You should only need it if you modified 'Makefile.am' or"
+      echo "$configure_deps."
+      program_details 'automake'
+      ;;
+    aclocal*)
+      echo "You should only need it if you modified 'acinclude.m4' or"
+      echo "$configure_deps."
+      program_details 'aclocal'
+      ;;
+   autom4te*)
+      echo "You might have modified some maintainer files that require"
+      echo "the 'autom4te' program to be rebuilt."
+      program_details 'autom4te'
+      ;;
+    bison*|yacc*)
+      echo "You should only need it if you modified a '.y' file."
+      echo "You may want to install the GNU Bison package:"
+      echo "<$gnu_software_URL/bison/>"
+      ;;
+    lex*|flex*)
+      echo "You should only need it if you modified a '.l' file."
+      echo "You may want to install the Fast Lexical Analyzer package:"
+      echo "<$flex_URL>"
+      ;;
+    help2man*)
+      echo "You should only need it if you modified a dependency" \
+           "of a man page."
+      echo "You may want to install the GNU Help2man package:"
+      echo "<$gnu_software_URL/help2man/>"
+    ;;
+    makeinfo*)
+      echo "You should only need it if you modified a '.texi' file, or"
+      echo "any other file indirectly affecting the aspect of the manual."
+      echo "You might want to install the Texinfo package:"
+      echo "<$gnu_software_URL/texinfo/>"
+      echo "The spurious makeinfo call might also be the consequence of"
+      echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+      echo "want to install GNU make:"
+      echo "<$gnu_software_URL/make/>"
+      ;;
+    *)
+      echo "You might have modified some files without having the proper"
+      echo "tools for further handling them.  Check the 'README' file, it"
+      echo "often tells you about the needed prerequisites for installing"
+      echo "this package.  You may also peek at any GNU archive site, in"
+      echo "case some other package contains this missing '$1' program."
+      ;;
+  esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+                       -e '2,$s/^/         /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff -Naurp dpkg-1.20.7.1-orig/config.h.in dpkg-1.20.7.1/config.h.in
--- dpkg-1.20.7.1-orig/config.h.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/config.h.in	2021-06-09 18:22:59.917294979 -0500
@@ -0,0 +1,443 @@
+/* config.h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define if building universal (internal helper macro) */
+#undef AC_APPLE_UNIVERSAL_BUILD
+
+/* Set this to the canonical dpkg architecture name. */
+#undef ARCHITECTURE
+
+/* Set this to the canonical dpkg CPU name. */
+#undef ARCHITECTURE_CPU
+
+/* Set this to the canonical dpkg system name. */
+#undef ARCHITECTURE_OS
+
+/* Define to 1 if dselect is compiled. */
+#undef BUILD_DSELECT
+
+/* Define to 1 if start-stop-daemon is compiled. */
+#undef BUILD_START_STOP_DAEMON
+
+/* Define to 1 if update-alternatives is compiled. */
+#undef BUILD_UPDATE_ALTERNATIVES
+
+/* default dpkg-deb build compressor */
+#undef DPKG_DEB_DEFAULT_COMPRESSOR
+
+/* Define to 1 if translation of program messages to the user's native
+   language is requested. */
+#undef ENABLE_NLS
+
+/* Define to 1 if you have the `alphasort' function. */
+#undef HAVE_ALPHASORT
+
+/* Define to 1 if you have the `asprintf' function. */
+#undef HAVE_ASPRINTF
+
+/* Define to 1 if the compiler supports C99. */
+#undef HAVE_C99
+
+/* Define to 1 if the 'snprintf' family is C99 conformant */
+#undef HAVE_C99_SNPRINTF
+
+/* Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the
+   CoreFoundation framework. */
+#undef HAVE_CFLOCALECOPYCURRENT
+
+/* Define to 1 if you have the Mac OS X function
+   CFLocaleCopyPreferredLanguages in the CoreFoundation framework. */
+#undef HAVE_CFLOCALECOPYPREFERREDLANGUAGES
+
+/* Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in
+   the CoreFoundation framework. */
+#undef HAVE_CFPREFERENCESCOPYAPPVALUE
+
+/* Define to 1 if you have the <curses.h> header file. */
+#undef HAVE_CURSES_H
+
+/* Define to 1 if the compiler supports C++11. */
+#undef HAVE_CXX11
+
+/* Define to 1 if you have the <cxxabi.h> header file. */
+#undef HAVE_CXXABI_H
+
+/* Define if the GNU dcgettext() function is already present or preinstalled.
+   */
+#undef HAVE_DCGETTEXT
+
+/* Define to 1 if you have the declaration of `sys_errlist', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SYS_ERRLIST
+
+/* Define to 1 if you have the declaration of `sys_nerr', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SYS_NERR
+
+/* Define to 1 if you have the declaration of `sys_siglist', and to 0 if you
+   don't. */
+#undef HAVE_DECL_SYS_SIGLIST
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <error.h> header file. */
+#undef HAVE_ERROR_H
+
+/* Define to 1 if you have the <err.h> header file. */
+#undef HAVE_ERR_H
+
+/* Define to 1 if you have the `fallocate' function. */
+#undef HAVE_FALLOCATE
+
+/* Define to 1 if 'F_ALLOCSP64' is declared in <fcntl.h> */
+#undef HAVE_F_ALLOCSP64
+
+/* Define to 1 if 'F_PREALLOCATE' is declared in <fcntl.h> */
+#undef HAVE_F_PREALLOCATE
+
+/* Define to 1 if you have the `getdtablesize' function. */
+#undef HAVE_GETDTABLESIZE
+
+/* Define to 1 if you have the `getexecname' function. */
+#undef HAVE_GETEXECNAME
+
+/* Define to 1 if you have the `getopt' function. */
+#undef HAVE_GETOPT
+
+/* Define to 1 if you have the `getopt_long' function. */
+#undef HAVE_GETOPT_LONG
+
+/* Define to 1 if you have the `getprogname' function. */
+#undef HAVE_GETPROGNAME
+
+/* Define if the GNU gettext() function is already present or preinstalled. */
+#undef HAVE_GETTEXT
+
+/* Define if you have the iconv() function and it works. */
+#undef HAVE_ICONV
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `isascii' function. */
+#undef HAVE_ISASCII
+
+/* Define to 1 if you have the <kvm.h> header file. */
+#undef HAVE_KVM_H
+
+/* Define to 1 if you have the `lchown' function. */
+#undef HAVE_LCHOWN
+
+/* Define to 1 if you have the <libintl.h> header file. */
+#undef HAVE_LIBINTL_H
+
+/* Define to 1 if you have the <linux/fiemap.h> header file. */
+#undef HAVE_LINUX_FIEMAP_H
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the `lutimes' function. */
+#undef HAVE_LUTIMES
+
+/* xz multithreaded compression support */
+#undef HAVE_LZMA_MT
+
+/* Define to 1 if 'makedev' is declared in <sys/types.h> */
+#undef HAVE_MAKEDEV
+
+/* Define to 1 if you have the <md5.h> header file. */
+#undef HAVE_MD5_H
+
+/* Define to 1 if you have the `memcpy' function. */
+#undef HAVE_MEMCPY
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `mmap' function. */
+#undef HAVE_MMAP
+
+/* Define to 1 if you have the <ncursesw/ncurses.h> header file. */
+#undef HAVE_NCURSESW_NCURSES_H
+
+/* Define to 1 if you have the <ncursesw/term.h> header file. */
+#undef HAVE_NCURSESW_TERM_H
+
+/* Define to 1 if you have the <ncurses.h> header file. */
+#undef HAVE_NCURSES_H
+
+/* Define to 1 if you have the <ncurses/ncurses.h> header file. */
+#undef HAVE_NCURSES_NCURSES_H
+
+/* Define to 1 if you have the <ncurses/term.h> header file. */
+#undef HAVE_NCURSES_TERM_H
+
+/* Define to 1 if you have the `obstack_free' function. */
+#undef HAVE_OBSTACK_FREE
+
+/* Define to 1 if 'offsetof' is declared in <stddef.h> */
+#undef HAVE_OFFSETOF
+
+/* Define to 1 if 'O_NOFOLLOW' is declared in <fcntl.h> */
+#undef HAVE_O_NOFOLLOW
+
+/* Define to 1 if you have the `posix_fadvise' function. */
+#undef HAVE_POSIX_FADVISE
+
+/* Define to 1 if you have the `posix_fallocate' function. */
+#undef HAVE_POSIX_FALLOCATE
+
+/* Define to 1 if you have program_invocation_short_name */
+#undef HAVE_PROGRAM_INVOCATION_SHORT_NAME
+
+/* Define to 1 if 'P_tmpdir' is declared in <stdio.h> */
+#undef HAVE_P_TMPDIR
+
+/* Define to 1 if you have the `scandir' function. */
+#undef HAVE_SCANDIR
+
+/* Define to 1 if SELinux setexecfilecon is present */
+#undef HAVE_SETEXECFILECON
+
+/* Define to 1 if you have the `setsid' function. */
+#undef HAVE_SETSID
+
+/* Define to 1 if you have the <stddef.h> header file. */
+#undef HAVE_STDDEF_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strchrnul' function. */
+#undef HAVE_STRCHRNUL
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strndup' function. */
+#undef HAVE_STRNDUP
+
+/* Define to 1 if you have the `strnlen' function. */
+#undef HAVE_STRNLEN
+
+/* Define to 1 if you have the `strsignal' function. */
+#undef HAVE_STRSIGNAL
+
+/* Define to 1 if you have the `strtoimax' function. */
+#undef HAVE_STRTOIMAX
+
+/* Define to 1 if you have the <sys/param.h> header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the <sys/procfs.h> header file. */
+#undef HAVE_SYS_PROCFS_H
+
+/* Define to 1 if you have the <sys/proc.h> header file. */
+#undef HAVE_SYS_PROC_H
+
+/* Define to 1 if you have the <sys/pstat.h> header file. */
+#undef HAVE_SYS_PSTAT_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/syscall.h> header file. */
+#undef HAVE_SYS_SYSCALL_H
+
+/* Define to 1 if you have the <sys/sysctl.h> header file. */
+#undef HAVE_SYS_SYSCTL_H
+
+/* Define to 1 if you have the <sys/sysmacros.h> header file. */
+#undef HAVE_SYS_SYSMACROS_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <sys/user.h> header file. */
+#undef HAVE_SYS_USER_H
+
+/* Define to 1 if you have the <term.h> header file. */
+#undef HAVE_TERM_H
+
+/* Define to 1 if 'TIOCNOTTY' is declared in <sys/ioctl.h> */
+#undef HAVE_TIOCNOTTY
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the `unsetenv' function. */
+#undef HAVE_UNSETENV
+
+/* Define to 1 if you have the `uselocale' function. */
+#undef HAVE_USELOCALE
+
+/* Define to 1 if the 'va_copy' macro exists */
+#undef HAVE_VA_COPY
+
+/* Define to 1 if 'WCOREDUMP' is declared in <sys/wait.h> */
+#undef HAVE_WCOREDUMP
+
+/* Define to 1 if you have the <xlocale.h> header file. */
+#undef HAVE_XLOCALE_H
+
+/* Define to 1 if you have the `__cxa_pure_virtual' function. */
+#undef HAVE___CXA_PURE_VIRTUAL
+
+/* Define to 1 if you have __progname */
+#undef HAVE___PROGNAME
+
+/* Acknowledge the volatility of the API. */
+#undef LIBDPKG_VOLATILE_API
+
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
+#undef LT_OBJDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define the project release information, version and architecture */
+#undef PACKAGE_RELEASE
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* GNU patch program */
+#undef PATCH
+
+/* The size of `unsigned int', as computed by sizeof. */
+#undef SIZEOF_UNSIGNED_INT
+
+/* The size of `unsigned long', as computed by sizeof. */
+#undef SIZEOF_UNSIGNED_LONG
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* GNU tar program */
+#undef TAR
+
+/* Use disk size pre-allocation */
+#undef USE_DISK_PREALLOCATE
+
+/* Use unreliable mmap support */
+#undef USE_MMAP
+
+/* Enable extensions on AIX 3, Interix.  */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+/* Enable GNU extensions on systems that have them.  */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+/* Enable threading extensions on Solaris.  */
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+/* Enable extensions on HP NonStop.  */
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif
+/* Enable general extensions on Solaris.  */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to 1 to use bz2 library rather than console tool */
+#undef WITH_LIBBZ2
+
+/* Define to 1 to use lzma library rather than console tool */
+#undef WITH_LIBLZMA
+
+/* Define to 1 to compile in SELinux support */
+#undef WITH_LIBSELINUX
+
+/* Define to 1 to use z library rather than console tool */
+#undef WITH_LIBZ
+
+/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
+   significant byte first (like Motorola and SPARC, unlike Intel). */
+#if defined AC_APPLE_UNIVERSAL_BUILD
+# if defined __BIG_ENDIAN__
+#  define WORDS_BIGENDIAN 1
+# endif
+#else
+# ifndef WORDS_BIGENDIAN
+#  undef WORDS_BIGENDIAN
+# endif
+#endif
+
+/* Enable large inode numbers on Mac OS X 10.5.  */
+#ifndef _DARWIN_USE_64_BIT_INODE
+# define _DARWIN_USE_64_BIT_INODE 1
+#endif
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+   this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 if you need to in order for `stat' and other things to work. */
+#undef _POSIX_SOURCE
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef mode_t
+
+/* Define to `int' if <sys/types.h> does not define. */
+#undef pid_t
+
+/* Define to 'int' if <malloc.h> does not define. */
+#undef ptrdiff_t
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
+
+/* Define to empty if the keyword `volatile' does not work. Warning: valid
+   code using `volatile' can become incorrect without. Disable with care. */
+#undef volatile
diff -Naurp dpkg-1.20.7.1-orig/configure dpkg-1.20.7.1/configure
--- dpkg-1.20.7.1-orig/configure	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/configure	2021-06-09 18:22:59.368294011 -0500
@@ -0,0 +1,30207 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for dpkg 1.20.7.1.
+#
+# Report bugs to <debian-dpkg@lists.debian.org>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+  # into an infinite loop, continuously re-executing ourselves.
+  if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+    _as_can_reexec=no; export _as_can_reexec;
+    # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+  fi
+  # We don't want this to propagate to other subprocesses.
+          { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  export CONFIG_SHELL
+             # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+  *v*x* | *x*v* ) as_opts=-vx ;;
+  *v* ) as_opts=-v ;;
+  *x* ) as_opts=-x ;;
+  * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: debian-dpkg@lists.debian.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+  # already done that, so ensure we don't try to do so again and fall
+  # in an infinite loop.  This has already happened in practice.
+  _as_can_reexec=no; export _as_can_reexec
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+as_awk_strverscmp='
+  # Use only awk features that work with 7th edition Unix awk (1978).
+  # My, what an old awk you have, Mr. Solaris!
+  END {
+    while (length(v1) && length(v2)) {
+      # Set d1 to be the next thing to compare from v1, and likewise for d2.
+      # Normally this is a single character, but if v1 and v2 contain digits,
+      # compare them as integers and fractions as strverscmp does.
+      if (v1 ~ /^[0-9]/ && v2 ~ /^[0-9]/) {
+	# Split v1 and v2 into their leading digit string components d1 and d2,
+	# and advance v1 and v2 past the leading digit strings.
+	for (len1 = 1; substr(v1, len1 + 1) ~ /^[0-9]/; len1++) continue
+	for (len2 = 1; substr(v2, len2 + 1) ~ /^[0-9]/; len2++) continue
+	d1 = substr(v1, 1, len1); v1 = substr(v1, len1 + 1)
+	d2 = substr(v2, 1, len2); v2 = substr(v2, len2 + 1)
+	if (d1 ~ /^0/) {
+	  if (d2 ~ /^0/) {
+	    # Compare two fractions.
+	    while (d1 ~ /^0/ && d2 ~ /^0/) {
+	      d1 = substr(d1, 2); len1--
+	      d2 = substr(d2, 2); len2--
+	    }
+	    if (len1 != len2 && ! (len1 && len2 && substr(d1, 1, 1) == substr(d2, 1, 1))) {
+	      # The two components differ in length, and the common prefix
+	      # contains only leading zeros.  Consider the longer to be less.
+	      d1 = -len1
+	      d2 = -len2
+	    } else {
+	      # Otherwise, compare as strings.
+	      d1 = "x" d1
+	      d2 = "x" d2
+	    }
+	  } else {
+	    # A fraction is less than an integer.
+	    exit 1
+	  }
+	} else {
+	  if (d2 ~ /^0/) {
+	    # An integer is greater than a fraction.
+	    exit 2
+	  } else {
+	    # Compare two integers.
+	    d1 += 0
+	    d2 += 0
+	  }
+	}
+      } else {
+	# The normal case, without worrying about digits.
+	d1 = substr(v1, 1, 1); v1 = substr(v1, 2)
+	d2 = substr(v2, 1, 1); v2 = substr(v2, 2)
+      }
+      if (d1 < d2) exit 1
+      if (d1 > d2) exit 2
+    }
+    # Beware Solaris /usr/xgp4/bin/awk (at least through Solaris 10),
+    # which mishandles some comparisons of empty strings to integers.
+    if (length(v2)) exit 1
+    if (length(v1)) exit 2
+  }
+'
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='dpkg'
+PACKAGE_TARNAME='dpkg'
+PACKAGE_VERSION='1.20.7.1'
+PACKAGE_STRING='dpkg 1.20.7.1'
+PACKAGE_BUGREPORT='debian-dpkg@lists.debian.org'
+PACKAGE_URL='https://wiki.debian.org/Teams/Dpkg'
+
+ac_unique_file="lib/dpkg/dpkg.h"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+gt_needs=
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+AUTOM4TE
+HAVE_UNSETENV_FALSE
+HAVE_UNSETENV_TRUE
+HAVE_ALPHASORT_FALSE
+HAVE_ALPHASORT_TRUE
+HAVE_SCANDIR_FALSE
+HAVE_SCANDIR_TRUE
+HAVE_ASPRINTF_FALSE
+HAVE_ASPRINTF_TRUE
+HAVE_STRSIGNAL_FALSE
+HAVE_STRSIGNAL_TRUE
+HAVE_STRERROR_FALSE
+HAVE_STRERROR_TRUE
+HAVE_STRNDUP_FALSE
+HAVE_STRNDUP_TRUE
+HAVE_STRNLEN_FALSE
+HAVE_STRNLEN_TRUE
+HAVE_STRCHRNUL_FALSE
+HAVE_STRCHRNUL_TRUE
+HAVE_OBSTACK_FREE_FALSE
+HAVE_OBSTACK_FREE_TRUE
+HAVE_GETOPT_LONG_FALSE
+HAVE_GETOPT_LONG_TRUE
+HAVE_GETOPT_FALSE
+HAVE_GETOPT_TRUE
+HAVE_C99_SNPRINTF_FALSE
+HAVE_C99_SNPRINTF_TRUE
+HAVE_SYS_ERRLIST_FALSE
+HAVE_SYS_ERRLIST_TRUE
+KVM_LIBS
+PS_LIBS
+CURSES_LIBS
+USE_UNICODE
+HAVE_SETEXECFILECON_FALSE
+HAVE_SETEXECFILECON_TRUE
+WITH_LIBSELINUX_FALSE
+WITH_LIBSELINUX_TRUE
+SELINUX_CFLAGS
+SELINUX_LIBS
+PKG_CONFIG_LIBDIR
+PKG_CONFIG_PATH
+PKG_CONFIG
+LZMA_LIBS
+BZ2_LIBS
+Z_LIBS
+HAVE_LIBMD_MD5_FALSE
+HAVE_LIBMD_MD5_TRUE
+MD_LIBS
+PERL_COVER
+PERL_COVERAGE
+LCOV_GENHTML
+LCOV
+GCOV
+COVERAGE_ENABLED_FALSE
+COVERAGE_ENABLED_TRUE
+BUILD_POD_DOC_FALSE
+BUILD_POD_DOC_TRUE
+POD2MAN
+USE_PO4A
+PO4A
+HAVE_DOT
+DOXYGEN
+PATCH
+CXXCPP
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+ac_ct_CXX
+CXXFLAGS
+CXX
+TAR
+logdir
+admindir
+pkgconfdir
+devlibdir
+BUILD_DEVEL_DOCS
+PACKAGE_RELEASE_DATE
+PERL_LIBDIR
+PERL_MIN_VERSION
+PERL
+BUILD_UPDATE_ALTERNATIVES_FALSE
+BUILD_UPDATE_ALTERNATIVES_TRUE
+BUILD_START_STOP_DAEMON_FALSE
+BUILD_START_STOP_DAEMON_TRUE
+BUILD_DSELECT_FALSE
+BUILD_DSELECT_TRUE
+HAVE_LINKER_VERSION_SCRIPT_FALSE
+HAVE_LINKER_VERSION_SCRIPT_TRUE
+HAVE_LINKER_AS_NEEDED_FALSE
+HAVE_LINKER_AS_NEEDED_TRUE
+BUILD_SHARED_FALSE
+BUILD_SHARED_TRUE
+LT_SYS_LIBRARY_PATH
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+LIBTOOL
+ac_ct_AR
+AR
+POSUB
+LTLIBINTL
+LIBINTL
+INTLLIBS
+LTLIBICONV
+LIBICONV
+INTL_MACOSX_LIBS
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+XGETTEXT_EXTRA_OPTIONS
+MSGMERGE_FOR_MSGFMT_OPTION
+MSGMERGE
+XGETTEXT_015
+XGETTEXT
+GMSGFMT_015
+GMSGFMT
+MSGFMT
+GETTEXT_MACRO_VERSION
+USE_NLS
+SED
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__include
+DEPDIR
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+EGREP
+GREP
+CPP
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+PACKAGE_CPAN_NAME
+PACKAGE_BUG_WEB
+PACKAGE_VCS_WEB
+PACKAGE_VCS_URL
+PACKAGE_VCS_TYPE
+PACKAGE_COPYRIGHT_HOLDER
+PACKAGE_DIST_IS_RELEASE
+PACKAGE_DIST_IS_RELEASE_FALSE
+PACKAGE_DIST_IS_RELEASE_TRUE
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL
+am__quote'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+enable_silent_rules
+enable_nls
+with_gnu_ld
+enable_rpath
+with_libiconv_prefix
+with_libintl_prefix
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_aix_soname
+with_sysroot
+enable_libtool_lock
+enable_dselect
+enable_start_stop_daemon
+enable_update_alternatives
+enable_devel_docs
+with_devlibdir
+with_pkgconfdir
+with_admindir
+with_logdir
+with_dpkg_deb_compressor
+enable_coverage
+enable_largefile
+with_libmd
+with_libz
+with_libbz2
+with_liblzma
+with_libselinux
+enable_unicode
+enable_mmap
+enable_disk_preallocate
+enable_compiler_warnings
+enable_compiler_optimizations
+enable_linker_optimizations
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+LT_SYS_LIBRARY_PATH
+PERL
+PERL_LIBDIR
+TAR
+CXX
+CXXFLAGS
+CCC
+CXXCPP
+PATCH
+PO4A
+POD2MAN
+MD_LIBS
+Z_LIBS
+BZ2_LIBS
+LZMA_LIBS
+PKG_CONFIG
+PKG_CONFIG_PATH
+PKG_CONFIG_LIBDIR
+SELINUX_LIBS
+SELINUX_CFLAGS
+CURSES_LIBS
+PS_LIBS
+KVM_LIBS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures dpkg 1.20.7.1 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/dpkg]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of dpkg 1.20.7.1:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-dependency-tracking
+                          do not reject slow dependency extractors
+  --disable-dependency-tracking
+                          speeds up one-time build
+  --enable-silent-rules   less verbose build output (undo: "make V=1")
+  --disable-silent-rules  verbose build output (undo: "make V=0")
+  --disable-nls           do not use Native Language Support
+  --disable-rpath         do not hardcode runtime library paths
+  --enable-shared[=PKGS]  build shared libraries [default=no]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --disable-dselect       do not build or use dselect
+  --disable-start-stop-daemon
+                          do not build or use start-stop-daemon
+  --disable-update-alternatives
+                          do not build or use update-alternatives
+  --disable-devel-docs    build release docs
+  --enable-coverage       whether to enable code coverage
+  --disable-largefile     omit support for large files
+  --disable-unicode       do not use Unicode (wide chars) support
+  --enable-mmap           enable usage of unrealiable mmap if available
+  --enable-disk-preallocate
+                          enable usage of disk size pre-allocation
+  --disable-compiler-warnings
+                          Disable (detected) additional compiler warnings
+  --disable-compiler-optimizations
+                          Disable (detected) compiler optimizations
+  --disable-linker-optimizations
+                          Disable (detected) linker optimizations
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-libiconv-prefix[=DIR]  search for libiconv in DIR/include and DIR/lib
+  --without-libiconv-prefix     don't search for libiconv in includedir and libdir
+  --with-libintl-prefix[=DIR]  search for libintl in DIR/include and DIR/lib
+  --without-libintl-prefix     don't search for libintl in includedir and libdir
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-aix-soname=aix|svr4|both
+                          shared library versioning (aka "SONAME") variant to
+                          provide on AIX, [default=aix].
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot[=DIR]    Search for dependent libraries within DIR (or the
+                          compiler's sysroot if not specified).
+  --with-devlibdir=DIR    dpkg development library directory [LIBDIR]
+  --with-pkgconfdir=DIR   dpkg configuration directory [SYSCONFDIR/dpkg]
+  --with-admindir=DIR     dpkg database directory [LOCALSTATEDIR/lib/dpkg]
+  --with-logdir=DIR       system logging directory [LOCALSTATEDIR/log]
+  --with-dpkg-deb-compressor=COMP
+                          change default dpkg-deb build compressor
+  --with-libmd            use libmd library for message digest functions
+  --with-libz             use z library for compression and decompression
+  --with-libbz2           use bz2 library for compression and decompression
+  --with-liblzma          use lzma library for compression and decompression
+  --with-libselinux       use selinux library to set security contexts
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  LT_SYS_LIBRARY_PATH
+              User-defined run-time library search path.
+  PERL        Perl interpreter
+  PERL_LIBDIR Perl library directory
+  TAR         GNU tar program
+  CXX         C++ compiler command
+  CXXFLAGS    C++ compiler flags
+  CXXCPP      C++ preprocessor
+  PATCH       GNU patch program
+  PO4A        po4a program
+  POD2MAN     pod2man program
+  MD_LIBS     linker flags for md library
+  Z_LIBS      linker flags for z library
+  BZ2_LIBS    linker flags for bz2 library
+  LZMA_LIBS   linker flags for lzma library
+  PKG_CONFIG  path to pkg-config utility
+  PKG_CONFIG_PATH
+              directories to add to pkg-config's search path
+  PKG_CONFIG_LIBDIR
+              path overriding pkg-config's built-in search path
+  SELINUX_LIBS
+              linker flags for selinux library
+  SELINUX_CFLAGS
+              C compiler flags for SELINUX, overriding pkg-config
+  CURSES_LIBS linker flags for curses library
+  PS_LIBS     linker flags for ps library
+  KVM_LIBS    linker flags for kvm library
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <debian-dpkg@lists.debian.org>.
+dpkg home page: <https://wiki.debian.org/Teams/Dpkg>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+dpkg configure 1.20.7.1
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if eval \${$3+:} false; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ------------------------------------------- ##
+## Report this to debian-dpkg@lists.debian.org ##
+## ------------------------------------------- ##"
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 test -x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+
+# ac_fn_cxx_check_header_mongrel LINENO HEADER VAR INCLUDES
+# ---------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_cxx_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if eval \${$3+:} false; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ------------------------------------------- ##
+## Report this to debian-dpkg@lists.debian.org ##
+## ------------------------------------------- ##"
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_header_mongrel
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
+# --------------------------------------------
+# Tries to find the compile-time value of EXPR in a program that includes
+# INCLUDES, setting VAR accordingly. Returns whether the value could be
+# computed
+ac_fn_c_compute_int ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if test "$cross_compiling" = yes; then
+    # Depending upon the size, compute the lo and hi bounds.
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= 0)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=0 ac_mid=0
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid; break
+else
+  as_fn_arith $ac_mid + 1 && ac_lo=$as_val
+			if test $ac_lo -le $ac_mid; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) < 0)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=-1 ac_mid=-1
+  while :; do
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) >= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_lo=$ac_mid; break
+else
+  as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
+			if test $ac_mid -le $ac_hi; then
+			  ac_lo= ac_hi=
+			  break
+			fi
+			as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+else
+  ac_lo= ac_hi=
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+# Binary search between lo and hi bounds.
+while test "x$ac_lo" != "x$ac_hi"; do
+  as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+static int test_array [1 - 2 * !(($2) <= $ac_mid)];
+test_array [0] = 0;
+return test_array [0];
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_hi=$ac_mid
+else
+  as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+case $ac_lo in #((
+?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
+'') ac_retval=1 ;;
+esac
+  else
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+static long int longval () { return $2; }
+static unsigned long int ulongval () { return $2; }
+#include <stdio.h>
+#include <stdlib.h>
+int
+main ()
+{
+
+  FILE *f = fopen ("conftest.val", "w");
+  if (! f)
+    return 1;
+  if (($2) < 0)
+    {
+      long int i = longval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%ld", i);
+    }
+  else
+    {
+      unsigned long int i = ulongval ();
+      if (i != ($2))
+	return 1;
+      fprintf (f, "%lu", i);
+    }
+  /* Do not output a trailing newline, as this causes \r\n confusion
+     on some platforms.  */
+  return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  echo >>conftest.val; read $3 <conftest.val; ac_retval=0
+else
+  ac_retval=1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+rm -f conftest.val
+
+  fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_compute_int
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
+# ---------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_c_check_decl ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  as_decl_name=`echo $2|sed 's/ *(.*//'`
+  as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+  (void) $as_decl_use;
+#else
+  (void) $as_decl_name;
+#endif
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_decl
+
+# ac_fn_cxx_check_func LINENO FUNC VAR
+# ------------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_cxx_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_cxx_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by dpkg $as_me 1.20.7.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+gt_needs="$gt_needs "
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+  if echo $PACKAGE_VERSION | grep -q -v '-'; then :
+
+    dpkg_dist_is_release=1
+
+else
+
+    dpkg_dist_is_release=0
+
+fi
+   if test "$dpkg_dist_is_release" -eq 1; then
+  PACKAGE_DIST_IS_RELEASE_TRUE=
+  PACKAGE_DIST_IS_RELEASE_FALSE='#'
+else
+  PACKAGE_DIST_IS_RELEASE_TRUE='#'
+  PACKAGE_DIST_IS_RELEASE_FALSE=
+fi
+
+  PACKAGE_DIST_IS_RELEASE=$dpkg_dist_is_release
+
+
+PACKAGE_COPYRIGHT_HOLDER='Dpkg Developers'
+
+PACKAGE_VCS_TYPE=git
+
+PACKAGE_VCS_URL=https://git.dpkg.org/git/dpkg/dpkg.git
+
+PACKAGE_VCS_WEB=https://git.dpkg.org/cgit/dpkg/dpkg.git
+
+PACKAGE_BUG_WEB=https://bugs.debian.org/src:dpkg
+
+PACKAGE_CPAN_NAME=Dpkg
+
+
+
+ac_aux_dir=
+for ac_dir in build-aux "$srcdir"/build-aux; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in build-aux \"$srcdir\"/build-aux" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+  ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
+if test "x$ac_cv_header_minix_config_h" = xyes; then :
+  MINIX=yes
+else
+  MINIX=
+fi
+
+
+  if test "$MINIX" = yes; then
+
+$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
+
+
+$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
+
+
+$as_echo "#define _MINIX 1" >>confdefs.h
+
+  fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
+$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
+if ${ac_cv_safe_to_define___extensions__+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#         define __EXTENSIONS__ 1
+          $ac_includes_default
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_safe_to_define___extensions__=yes
+else
+  ac_cv_safe_to_define___extensions__=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
+$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
+  test $ac_cv_safe_to_define___extensions__ = yes &&
+    $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
+
+  $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+  $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
+
+  $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
+
+
+
+am__api_version='1.16'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   am_has_slept=no
+   for am_try in 1 2; do
+     echo "timestamp, slept: $am_has_slept" > conftest.file
+     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+     if test "$*" = "X"; then
+	# -L didn't work.
+	set X `ls -t "$srcdir/configure" conftest.file`
+     fi
+     if test "$*" != "X $srcdir/configure conftest.file" \
+	&& test "$*" != "X conftest.file $srcdir/configure"; then
+
+	# If neither matched, then we have a broken ls.  This can happen
+	# if, for instance, CONFIG_SHELL is bash and it inherits a
+	# broken ls alias from the environment.  This has actually
+	# happened.  Such a system could not be considered "sane".
+	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+  alias in your environment" "$LINENO" 5
+     fi
+     if test "$2" = conftest.file || test $am_try -eq 2; then
+       break
+     fi
+     # Just in case.
+     sleep 1
+     am_has_slept=yes
+   done
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+  ( sleep 1 ) &
+  am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+  am_missing_run="$MISSING "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip".  However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5
+$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; }
+cat > confinc.mk << 'END'
+am__doit:
+	@echo this is the am__doit target >confinc.out
+.PHONY: am__doit
+END
+am__include="#"
+am__quote=
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+  { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5
+   (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+  case $?:`cat confinc.out 2>/dev/null` in #(
+  '0:this is the am__doit target') :
+    case $s in #(
+  BSD) :
+    am__include='.include' am__quote='"' ;; #(
+  *) :
+    am__include='include' am__quote='' ;;
+esac ;; #(
+  *) :
+     ;;
+esac
+  if test "$am__include" != "#"; then
+    _am_result="yes ($s style)"
+    break
+  fi
+done
+rm -f confinc.* confmf.*
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5
+$as_echo "${_am_result}" >&6; }
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+  am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='dpkg'
+ VERSION='1.20.7.1'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility.  To be removed once Automake 1.9.x
+# dies out for good.  For more background, see:
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target (and possibly the TAP driver).  The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility.  Yes, it's still used
+# in the wild :-(  We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar plaintar pax cpio none'
+
+# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+      # There is notably a 21 bits limit for the UID and the GID.  In fact,
+      # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+      # and bug#13588).
+      am_max_uid=2097151 # 2^21 - 1
+      am_max_gid=$am_max_uid
+      # The $UID and $GID variables are not portable, so we need to resort
+      # to the POSIX-mandated id(1) utility.  Errors in the 'id' calls
+      # below are definitely unexpected, so allow the users to see them
+      # (that is, avoid stderr redirection).
+      am_uid=`id -u || echo unknown`
+      am_gid=`id -g || echo unknown`
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether UID '$am_uid' is supported by ustar format" >&5
+$as_echo_n "checking whether UID '$am_uid' is supported by ustar format... " >&6; }
+      if test $am_uid -le $am_max_uid; then
+         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+      else
+         { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+         _am_tools=none
+      fi
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether GID '$am_gid' is supported by ustar format" >&5
+$as_echo_n "checking whether GID '$am_gid' is supported by ustar format... " >&6; }
+      if test $am_gid -le $am_max_gid; then
+         { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+        _am_tools=none
+      fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to create a ustar tar archive" >&5
+$as_echo_n "checking how to create a ustar tar archive... " >&6; }
+
+  # Go ahead even if we have the value already cached.  We do so because we
+  # need to set the values for the 'am__tar' and 'am__untar' variables.
+  _am_tools=${am_cv_prog_tar_ustar-$_am_tools}
+
+  for _am_tool in $_am_tools; do
+    case $_am_tool in
+    gnutar)
+      for _am_tar in tar gnutar gtar; do
+        { echo "$as_me:$LINENO: $_am_tar --version" >&5
+   ($_am_tar --version) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } && break
+      done
+      am__tar="$_am_tar --format=ustar -chf - "'"$$tardir"'
+      am__tar_="$_am_tar --format=ustar -chf - "'"$tardir"'
+      am__untar="$_am_tar -xf -"
+      ;;
+    plaintar)
+      # Must skip GNU tar: if it does not support --format= it doesn't create
+      # ustar tarball either.
+      (tar --version) >/dev/null 2>&1 && continue
+      am__tar='tar chf - "$$tardir"'
+      am__tar_='tar chf - "$tardir"'
+      am__untar='tar xf -'
+      ;;
+    pax)
+      am__tar='pax -L -x ustar -w "$$tardir"'
+      am__tar_='pax -L -x ustar -w "$tardir"'
+      am__untar='pax -r'
+      ;;
+    cpio)
+      am__tar='find "$$tardir" -print | cpio -o -H ustar -L'
+      am__tar_='find "$tardir" -print | cpio -o -H ustar -L'
+      am__untar='cpio -i -H ustar -d'
+      ;;
+    none)
+      am__tar=false
+      am__tar_=false
+      am__untar=false
+      ;;
+    esac
+
+    # If the value was cached, stop now.  We just wanted to have am__tar
+    # and am__untar set.
+    test -n "${am_cv_prog_tar_ustar}" && break
+
+    # tar/untar a dummy directory, and stop if the command works.
+    rm -rf conftest.dir
+    mkdir conftest.dir
+    echo GrepMe > conftest.dir/file
+    { echo "$as_me:$LINENO: tardir=conftest.dir && eval $am__tar_ >conftest.tar" >&5
+   (tardir=conftest.dir && eval $am__tar_ >conftest.tar) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+    rm -rf conftest.dir
+    if test -s conftest.tar; then
+      { echo "$as_me:$LINENO: $am__untar <conftest.tar" >&5
+   ($am__untar <conftest.tar) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+      { echo "$as_me:$LINENO: cat conftest.dir/file" >&5
+   (cat conftest.dir/file) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); }
+      grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+    fi
+  done
+  rm -rf conftest.dir
+
+  if ${am_cv_prog_tar_ustar+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  am_cv_prog_tar_ustar=$_am_tool
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_tar_ustar" >&5
+$as_echo "$am_cv_prog_tar_ustar" >&6; }
+
+
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes.  So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+  cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present.  This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message.  This
+can help us improve future automake versions.
+
+END
+  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+    echo 'Configuration will proceed anyway, since you have set the' >&2
+    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+    echo >&2
+  else
+    cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+  fi
+fi
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+  enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+    *) AM_DEFAULT_VERBOSITY=0;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+	@$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+  am_cv_make_support_nested_variables=yes
+else
+  am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+
+# Require at least this gettext version, but will take any later version too.
+
+# XXX: We cannot remove the following macro due to backwards compatibility
+# reasons. The above macro is set unconditionally to the minimal version
+# required, and the below is set to 0.19.6, the first version introducing
+# the AM_GNU_GETTEXT_REQUIRE_VERSION macro.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
+$as_echo_n "checking whether NLS is requested... " >&6; }
+    # Check whether --enable-nls was given.
+if test "${enable_nls+set}" = set; then :
+  enableval=$enable_nls; USE_NLS=$enableval
+else
+  USE_NLS=yes
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+
+
+
+
+      GETTEXT_MACRO_VERSION=0.20
+
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGFMT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$MSGFMT" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
+     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+            ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
+    ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test "$MSGFMT" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
+$as_echo "$MSGFMT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_GMSGFMT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $GMSGFMT in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+  ;;
+esac
+fi
+GMSGFMT=$ac_cv_path_GMSGFMT
+if test -n "$GMSGFMT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
+$as_echo "$GMSGFMT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+    case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+    *) GMSGFMT_015=$GMSGFMT ;;
+  esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_XGETTEXT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$XGETTEXT" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
+     (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+            ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+    ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test "$XGETTEXT" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
+$as_echo "$XGETTEXT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+    rm -f messages.po
+
+    case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+    *) XGETTEXT_015=$XGETTEXT ;;
+  esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_MSGMERGE+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case "$MSGMERGE" in
+  [\\/]* | ?:[\\/]*)
+    ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH; do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&5
+          if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
+            ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+  test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
+    ;;
+esac
+fi
+MSGMERGE="$ac_cv_path_MSGMERGE"
+if test "$MSGMERGE" != ":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
+$as_echo "$MSGMERGE" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    if LC_ALL=C $MSGMERGE --help | grep ' --for-msgfmt ' >/dev/null; then
+    MSGMERGE_FOR_MSGFMT_OPTION='--for-msgfmt'
+  else
+        if LC_ALL=C $MSGMERGE --help | grep ' --no-fuzzy-matching ' >/dev/null; then
+      MSGMERGE_FOR_MSGFMT_OPTION='--no-fuzzy-matching --no-location --quiet'
+    else
+                        MSGMERGE_FOR_MSGFMT_OPTION='--no-location --quiet'
+    fi
+  fi
+
+
+    test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+
+
+  ac_config_commands="$ac_config_commands po-directories"
+
+
+
+      if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld" >&5
+$as_echo_n "checking for ld... " >&6; }
+elif test "$GCC" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test -n "$LD"; then
+  # Let the user override the test with a path.
+  :
+else
+  if ${acl_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    acl_cv_path_LD= # Final result of this test
+    ac_prog=ld # Program to search in $PATH
+    if test "$GCC" = yes; then
+      # Check if gcc -print-prog-name=ld gives a path.
+      case $host in
+        *-*-mingw*)
+          # gcc leaves a trailing carriage return which upsets mingw
+          acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+        *)
+          acl_output=`($CC -print-prog-name=ld) 2>&5` ;;
+      esac
+      case $acl_output in
+        # Accept absolute paths.
+        [\\/]* | ?:[\\/]*)
+          re_direlt='/[^/][^/]*/\.\./'
+          # Canonicalize the pathname of ld
+          acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'`
+          while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do
+            acl_output=`echo $acl_output | sed "s%$re_direlt%/%"`
+          done
+          # Got the pathname. No search in PATH is needed.
+          acl_cv_path_LD="$acl_output"
+          ac_prog=
+          ;;
+        "")
+          # If it fails, then pretend we aren't using GCC.
+          ;;
+        *)
+          # If it is relative, then search for the first ld in PATH.
+          with_gnu_ld=unknown
+          ;;
+      esac
+    fi
+    if test -n "$ac_prog"; then
+      # Search for $ac_prog in $PATH.
+      acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+      for ac_dir in $PATH; do
+        IFS="$acl_save_ifs"
+        test -z "$ac_dir" && ac_dir=.
+        if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+          acl_cv_path_LD="$ac_dir/$ac_prog"
+          # Check to see if the program is GNU ld.  I'd rather use --version,
+          # but apparently some variants of GNU ld only accept -v.
+          # Break only if it was the GNU/non-GNU ld that we prefer.
+          case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in
+            *GNU* | *'with BFD'*)
+              test "$with_gnu_ld" != no && break
+              ;;
+            *)
+              test "$with_gnu_ld" != yes && break
+              ;;
+          esac
+        fi
+      done
+      IFS="$acl_save_ifs"
+    fi
+    case $host in
+      *-*-aix*)
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __powerpc64__ || defined _ARCH_PPC64
+                int ok;
+               #else
+                error fail
+               #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  # The compiler produces 64-bit code. Add option '-b64' so that the
+           # linker groks 64-bit object files.
+           case "$acl_cv_path_LD " in
+             *" -b64 "*) ;;
+             *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;;
+           esac
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+        ;;
+      sparc64-*-netbsd*)
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __sparcv9 || defined __arch64__
+                int ok;
+               #else
+                error fail
+               #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  # The compiler produces 32-bit code. Add option '-m elf32_sparc'
+           # so that the linker groks 32-bit object files.
+           case "$acl_cv_path_LD " in
+             *" -m elf32_sparc "*) ;;
+             *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;;
+           esac
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+        ;;
+    esac
+
+fi
+
+  LD="$acl_cv_path_LD"
+fi
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${acl_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  acl_cv_prog_gnu_ld=yes
+  ;;
+*)
+  acl_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+
+                                                { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if ${acl_cv_rpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+  wl="$acl_cv_wl"
+  acl_libext="$acl_cv_libext"
+  acl_shlibext="$acl_cv_shlibext"
+  acl_libname_spec="$acl_cv_libname_spec"
+  acl_library_names_spec="$acl_cv_library_names_spec"
+  acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  acl_hardcode_direct="$acl_cv_hardcode_direct"
+  acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+    # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+  enableval=$enable_rpath; :
+else
+  enable_rpath=yes
+fi
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking 32-bit host C ABI" >&5
+$as_echo_n "checking 32-bit host C ABI... " >&6; }
+if ${gl_cv_host_cpu_c_abi_32bit+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$gl_cv_host_cpu_c_abi"; then
+       case "$gl_cv_host_cpu_c_abi" in
+         i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc)
+           gl_cv_host_cpu_c_abi_32bit=yes ;;
+         *)
+           gl_cv_host_cpu_c_abi_32bit=no ;;
+       esac
+     else
+       case "$host_cpu" in
+
+         i[4567]86 )
+           gl_cv_host_cpu_c_abi_32bit=yes
+           ;;
+
+         x86_64 )
+           # On x86_64 systems, the C compiler may be generating code in one of
+           # these ABIs:
+           # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64.
+           # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64
+           #   with native Windows (mingw, MSVC).
+           # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32.
+           # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if (defined __x86_64__ || defined __amd64__ \
+                       || defined _M_X64 || defined _M_AMD64) \
+                      && !(defined __ILP32__ || defined _ILP32)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         arm* | aarch64 )
+           # Assume arm with EABI.
+           # On arm64 systems, the C compiler may be generating code in one of
+           # these ABIs:
+           # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64.
+           # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32.
+           # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __aarch64__ && !(defined __ILP32__ || defined _ILP32)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         hppa1.0 | hppa1.1 | hppa2.0* | hppa64 )
+           # On hppa, the C compiler may be generating 32-bit code or 64-bit
+           # code. In the latter case, it defines _LP64 and __LP64__.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __LP64__
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         ia64* )
+           # On ia64 on HP-UX, the C compiler may be generating 64-bit code or
+           # 32-bit code. In the latter case, it defines _ILP32.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef _ILP32
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=yes
+else
+  gl_cv_host_cpu_c_abi_32bit=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         mips* )
+           # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this
+           # at 32.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         powerpc* )
+           # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD.
+           # No need to distinguish them here; the caller may distinguish
+           # them based on the OS.
+           # On powerpc64 systems, the C compiler may still be generating
+           # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may
+           # be generating 64-bit code.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __powerpc64__ || defined _ARCH_PPC64
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         rs6000 )
+           gl_cv_host_cpu_c_abi_32bit=yes
+           ;;
+
+         riscv32 | riscv64 )
+           # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d.
+           # Size of 'long' and 'void *':
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __LP64__
+                    int ok;
+                  #else
+                    error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         s390* )
+           # On s390x, the C compiler may be generating 64-bit (= s390x) code
+           # or 31-bit (= s390) code.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __LP64__ || defined __s390x__
+                    int ok;
+                  #else
+                    error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         sparc | sparc64 )
+           # UltraSPARCs running Linux have `uname -m` = "sparc64", but the
+           # C compiler still generates 32-bit code.
+           cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined __sparcv9 || defined __arch64__
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_host_cpu_c_abi_32bit=no
+else
+  gl_cv_host_cpu_c_abi_32bit=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+           ;;
+
+         *)
+           gl_cv_host_cpu_c_abi_32bit=no
+           ;;
+       esac
+     fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_host_cpu_c_abi_32bit" >&5
+$as_echo "$gl_cv_host_cpu_c_abi_32bit" >&6; }
+
+  HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit"
+
+
+
+
+
+  case "$host_os" in
+    solaris*)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5
+$as_echo_n "checking for 64-bit host... " >&6; }
+if ${gl_cv_solaris_64bit+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef _LP64
+                 int ok;
+                #else
+                 error fail
+                #endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  gl_cv_solaris_64bit=yes
+else
+  gl_cv_solaris_64bit=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5
+$as_echo "$gl_cv_solaris_64bit" >&6; };;
+  esac
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the common suffixes of directories in the library search path" >&5
+$as_echo_n "checking for the common suffixes of directories in the library search path... " >&6; }
+if ${acl_cv_libdirstems+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  acl_libdirstem=lib
+     acl_libdirstem2=
+     case "$host_os" in
+       solaris*)
+                                                      if test $gl_cv_solaris_64bit = yes; then
+           acl_libdirstem=lib/64
+           case "$host_cpu" in
+             sparc*)        acl_libdirstem2=lib/sparcv9 ;;
+             i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+           esac
+         fi
+         ;;
+       *)
+                           if test "$HOST_CPU_C_ABI_32BIT" != yes; then
+                                            searchpath=`(if test -f /usr/bin/gcc \
+                           && LC_ALL=C /usr/bin/gcc -print-search-dirs >/dev/null 2>/dev/null; then \
+                          LC_ALL=C /usr/bin/gcc -print-search-dirs; \
+                        else \
+                          LC_ALL=C $CC -print-search-dirs; \
+                        fi) 2>/dev/null \
+                       | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+           if test -n "$searchpath"; then
+             acl_save_IFS="${IFS= 	}"; IFS=":"
+             for searchdir in $searchpath; do
+               if test -d "$searchdir"; then
+                 case "$searchdir" in
+                   */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+                   */../ | */.. )
+                     # Better ignore directories of this form. They are misleading.
+                     ;;
+                   *) searchdir=`cd "$searchdir" && pwd`
+                      case "$searchdir" in
+                        */lib64 ) acl_libdirstem=lib64 ;;
+                      esac ;;
+                 esac
+               fi
+             done
+             IFS="$acl_save_IFS"
+           fi
+         fi
+         ;;
+     esac
+     test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+     acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_libdirstems" >&5
+$as_echo "$acl_cv_libdirstems" >&6; }
+  # Decompose acl_cv_libdirstems into acl_libdirstem and acl_libdirstem2.
+  acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'`
+  acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e '/,/s/.*,//'`
+
+
+
+
+
+
+
+
+
+
+
+    use_additional=yes
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then :
+  withval=$with_libiconv_prefix;
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && test ! -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+
+fi
+
+      LIBICONV=
+  LTLIBICONV=
+  INCICONV=
+  LIBICONV_PREFIX=
+      HAVE_LIBICONV=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='iconv '
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+          else
+                                    :
+          fi
+        else
+                              found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+                                    if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+                        if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                                    if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                                    if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+                                                        if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+              else
+                                                                                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                                if test "$acl_hardcode_direct" = yes; then
+                                                      LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                                                            haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                                                                                haveit=
+                    for x in $LDFLAGS $LIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                                                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+                    else
+                                                                                                                                                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                                LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+              else
+                                                LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+              fi
+            fi
+                        additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = 'iconv'; then
+                  LIBICONV_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = 'iconv'; then
+                  LIBICONV_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INCICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                                            INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+                        if test -n "$found_la"; then
+                                                        save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+                            for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                                                                                                                                                                if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIBICONV; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                                                                  haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                                                                  haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                                        LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+                    LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+                                                            LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+            LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+                        alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+            acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+    else
+            for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+            for found_dir in $ltrpathdirs; do
+      LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+    done
+  fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
+$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
+if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFPreferences.h>
+int
+main ()
+{
+CFPreferencesCopyAppValue(NULL, NULL)
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFPreferencesCopyAppValue=yes
+else
+  gt_cv_func_CFPreferencesCopyAppValue=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
+$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+
+$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
+
+  fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
+$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
+if ${gt_cv_func_CFLocaleCopyCurrent+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyCurrent();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFLocaleCopyCurrent=yes
+else
+  gt_cv_func_CFLocaleCopyCurrent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
+  if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
+
+  fi
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyPreferredLanguages" >&5
+$as_echo_n "checking for CFLocaleCopyPreferredLanguages... " >&6; }
+if ${gt_cv_func_CFLocaleCopyPreferredLanguages+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyPreferredLanguages();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  gt_cv_func_CFLocaleCopyPreferredLanguages=yes
+else
+  gt_cv_func_CFLocaleCopyPreferredLanguages=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyPreferredLanguages" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyPreferredLanguages" >&6; }
+  if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYPREFERREDLANGUAGES 1" >>confdefs.h
+
+  fi
+  INTL_MACOSX_LIBS=
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes \
+     || test $gt_cv_func_CFLocaleCopyCurrent = yes \
+     || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
+    INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+  fi
+
+
+
+
+
+
+  LIBINTL=
+  LTLIBINTL=
+  POSUB=
+
+    case " $gt_needs " in
+    *" need-formatstring-macros "*) gt_api_version=3 ;;
+    *" need-ngettext "*) gt_api_version=2 ;;
+    *) gt_api_version=1 ;;
+  esac
+  gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+  gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+    if test "$USE_NLS" = "yes"; then
+    gt_use_preinstalled_gnugettext=no
+
+
+        if test $gt_api_version -ge 3; then
+          gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+'
+        else
+          gt_revision_test_code=
+        fi
+        if test $gt_api_version -ge 2; then
+          gt_expression_test_code=' + * ngettext ("", "", 0)'
+        else
+          gt_expression_test_code=
+        fi
+
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
+$as_echo_n "checking for GNU gettext in libc... " >&6; }
+if eval \${$gt_func_gnugettext_libc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings)
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$gt_func_gnugettext_libc=yes"
+else
+  eval "$gt_func_gnugettext_libc=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$gt_func_gnugettext_libc
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+
+
+
+
+
+          am_save_CPPFLAGS="$CPPFLAGS"
+
+  for element in $INCICONV; do
+    haveit=
+    for x in $CPPFLAGS; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+    fi
+  done
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
+$as_echo_n "checking for iconv... " >&6; }
+if ${am_cv_func_iconv+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    am_cv_func_iconv="no, consider installing GNU libiconv"
+    am_cv_lib_iconv=no
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <iconv.h>
+
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+           iconv(cd,NULL,NULL,NULL,NULL);
+           iconv_close(cd);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    if test "$am_cv_func_iconv" != yes; then
+      am_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBICONV"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <stdlib.h>
+#include <iconv.h>
+
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+             iconv(cd,NULL,NULL,NULL,NULL);
+             iconv_close(cd);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  am_cv_lib_iconv=yes
+        am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+      LIBS="$am_save_LIBS"
+    fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
+$as_echo "$am_cv_func_iconv" >&6; }
+  if test "$am_cv_func_iconv" = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
+$as_echo_n "checking for working iconv... " >&6; }
+if ${am_cv_func_iconv_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+                  am_save_LIBS="$LIBS"
+      if test $am_cv_lib_iconv = yes; then
+        LIBS="$LIBS $LIBICONV"
+      fi
+      am_cv_func_iconv_works=no
+      for ac_iconv_const in '' 'const'; do
+        if test "$cross_compiling" = yes; then :
+  case "$host_os" in
+             aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+             *)            am_cv_func_iconv_works="guessing yes" ;;
+           esac
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <iconv.h>
+#include <string.h>
+
+#ifndef ICONV_CONST
+# define ICONV_CONST $ac_iconv_const
+#endif
+
+int
+main ()
+{
+int result = 0;
+  /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+     returns.  */
+  {
+    iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+    if (cd_utf8_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_utf8_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 1;
+        iconv_close (cd_utf8_to_88591);
+      }
+  }
+  /* Test against Solaris 10 bug: Failures are not distinguishable from
+     successful returns.  */
+  {
+    iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+    if (cd_ascii_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\263";
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_ascii_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 2;
+        iconv_close (cd_ascii_to_88591);
+      }
+  }
+  /* Test against AIX 6.1..7.1 bug: Buffer overrun.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304";
+        static char buf[2] = { (char)0xDE, (char)0xAD };
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = 1;
+        char *outptr = buf;
+        size_t outbytesleft = 1;
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
+          result |= 4;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#if 0 /* This bug could be worked around by the caller.  */
+  /* Test against HP-UX 11.11 bug: Positive return value instead of 0.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+        char buf[50];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if ((int)res > 0)
+          result |= 8;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#endif
+  /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+     provided.  */
+  {
+    /* Try standardized names.  */
+    iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP");
+    /* Try IRIX, OSF/1 names.  */
+    iconv_t cd2 = iconv_open ("UTF-8", "eucJP");
+    /* Try AIX names.  */
+    iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP");
+    /* Try HP-UX names.  */
+    iconv_t cd4 = iconv_open ("utf8", "eucJP");
+    if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1)
+        && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1))
+      result |= 16;
+    if (cd1 != (iconv_t)(-1))
+      iconv_close (cd1);
+    if (cd2 != (iconv_t)(-1))
+      iconv_close (cd2);
+    if (cd3 != (iconv_t)(-1))
+      iconv_close (cd3);
+    if (cd4 != (iconv_t)(-1))
+      iconv_close (cd4);
+  }
+  return result;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  am_cv_func_iconv_works=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+        test "$am_cv_func_iconv_works" = no || break
+      done
+      LIBS="$am_save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
+$as_echo "$am_cv_func_iconv_works" >&6; }
+    case "$am_cv_func_iconv_works" in
+      *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+      *)   am_func_iconv=yes ;;
+    esac
+  else
+    am_func_iconv=no am_cv_lib_iconv=no
+  fi
+  if test "$am_func_iconv" = yes; then
+
+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
+
+  fi
+  if test "$am_cv_lib_iconv" = yes; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
+$as_echo_n "checking how to link with libiconv... " >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
+$as_echo "$LIBICONV" >&6; }
+  else
+            CPPFLAGS="$am_save_CPPFLAGS"
+    LIBICONV=
+    LTLIBICONV=
+  fi
+
+
+
+
+
+
+
+
+
+
+    use_additional=yes
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+
+# Check whether --with-libintl-prefix was given.
+if test "${with_libintl_prefix+set}" = set; then :
+  withval=$with_libintl_prefix;
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && test ! -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+
+fi
+
+      LIBINTL=
+  LTLIBINTL=
+  INCINTL=
+  LIBINTL_PREFIX=
+      HAVE_LIBINTL=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='intl '
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+                        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
+          else
+                                    :
+          fi
+        else
+                              found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+                                    if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+                        if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                                    if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                                    if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+                                                        if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+              else
+                                                                                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                                if test "$acl_hardcode_direct" = yes; then
+                                                      LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                                                            haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                                                                                haveit=
+                    for x in $LDFLAGS $LIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                                                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+                    else
+                                                                                                                                                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                                LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
+              else
+                                                LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
+              fi
+            fi
+                        additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = 'intl'; then
+                  LIBINTL_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = 'intl'; then
+                  LIBINTL_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+                                                                                                                if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INCINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                                            INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+                        if test -n "$found_la"; then
+                                                        save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+                            for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                                                                                                                                                                if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIBINTL; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                                                        LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                                                                  haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                                                                  haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                                        names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                                                                                names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                                        LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
+                    LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+                                                            LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+            LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+                        alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+            acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+    else
+            for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+            for found_dir in $ltrpathdirs; do
+      LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
+    done
+  fi
+
+
+
+
+
+          { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
+$as_echo_n "checking for GNU gettext in libintl... " >&6; }
+if eval \${$gt_func_gnugettext_libintl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  gt_save_CPPFLAGS="$CPPFLAGS"
+            CPPFLAGS="$CPPFLAGS $INCINTL"
+            gt_save_LIBS="$LIBS"
+            LIBS="$LIBS $LIBINTL"
+                        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$gt_func_gnugettext_libintl=yes"
+else
+  eval "$gt_func_gnugettext_libintl=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+                        if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+              LIBS="$LIBS $LIBICONV"
+              cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+
+int
+main ()
+{
+
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  LIBINTL="$LIBINTL $LIBICONV"
+                 LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+                 eval "$gt_func_gnugettext_libintl=yes"
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+            fi
+            CPPFLAGS="$gt_save_CPPFLAGS"
+            LIBS="$gt_save_LIBS"
+fi
+eval ac_res=\$$gt_func_gnugettext_libintl
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+        fi
+
+                                        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+           || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+                && test "$PACKAGE" != gettext-runtime \
+                && test "$PACKAGE" != gettext-tools; }; then
+          gt_use_preinstalled_gnugettext=yes
+        else
+                    LIBINTL=
+          LTLIBINTL=
+          INCINTL=
+        fi
+
+
+
+    if test -n "$INTL_MACOSX_LIBS"; then
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+                LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+        LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+      fi
+    fi
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes" \
+       || test "$nls_cv_use_gnu_gettext" = "yes"; then
+
+$as_echo "#define ENABLE_NLS 1" >>confdefs.h
+
+    else
+      USE_NLS=no
+    fi
+  fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
+$as_echo_n "checking whether to use NLS... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+  if test "$USE_NLS" = "yes"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
+$as_echo_n "checking where the gettext function comes from... " >&6; }
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        gt_source="external libintl"
+      else
+        gt_source="libc"
+      fi
+    else
+      gt_source="included intl directory"
+    fi
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
+$as_echo "$gt_source" >&6; }
+  fi
+
+  if test "$USE_NLS" = "yes"; then
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
+$as_echo_n "checking how to link with libintl... " >&6; }
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
+$as_echo "$LIBINTL" >&6; }
+
+  for element in $INCINTL; do
+    haveit=
+    for x in $CPPFLAGS; do
+
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  eval x=\"$x\"
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+    fi
+  done
+
+      fi
+
+
+$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
+
+    fi
+
+        POSUB=po
+  fi
+
+
+
+    INTLLIBS="$LIBINTL"
+
+
+
+
+
+
+
+  if test ! -f $srcdir/.dist-version && test "$GMSGFMT" = ":" && test "$USE_NLS" = "yes"; then :
+
+    as_fn_error $? "not building from distributed tarball, gettext required when NLS support enabled" "$LINENO" 5
+
+fi
+
+
+# Shared libraries are disabled on purpose, currently there is no ABI stability
+# guarantee, and it will be broken at will. The infrastructure is in place just
+# to be able to test that its future activation will work.
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar lib "link -lib"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar lib "link -lib"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the archiver ($AR) interface" >&5
+$as_echo_n "checking the archiver ($AR) interface... " >&6; }
+if ${am_cv_ar_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+   am_cv_ar_interface=ar
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int some_variable = 0;
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+  (eval $am_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+        am_cv_ar_interface=ar
+      else
+        am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&5'
+        { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+  (eval $am_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+        if test "$ac_status" -eq 0; then
+          am_cv_ar_interface=lib
+        else
+          am_cv_ar_interface=unknown
+        fi
+      fi
+      rm -f conftest.lib libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5
+$as_echo "$am_cv_ar_interface" >&6; }
+
+case $am_cv_ar_interface in
+ar)
+  ;;
+lib)
+  # Microsoft lib, so override with the ar-lib wrapper script.
+  # FIXME: It is wrong to rewrite AR.
+  # But if we don't then we get into trouble of one sort or another.
+  # A longer-term fix would be to have automake use am__AR in this case,
+  # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+  # similar.
+  AR="$am_aux_dir/ar-lib $AR"
+  ;;
+unknown)
+  as_fn_error $? "could not determine $AR interface" "$LINENO" 5
+  ;;
+esac
+
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.6'
+macro_revision='2.4.6'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain=$ac_aux_dir/ltmain.sh
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case $ECHO in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test yes = "$GCC"; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return, which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD=$ac_prog
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test yes = "$with_gnu_ld"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD=$ac_dir/$ac_prog
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test no != "$with_gnu_ld" && break
+	;;
+      *)
+	test yes != "$with_gnu_ld" && break
+	;;
+      esac
+    fi
+  done
+  IFS=$lt_save_ifs
+else
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi
+fi
+
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM=$NM
+else
+  lt_nm_to_check=${ac_tool_prefix}nm
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS=$lt_save_ifs
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm=$ac_dir/$lt_tmp_nm
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+	case $build_os in
+	mingw*) lt_bad_file=conftest.nm/nofile ;;
+	*) lt_bad_file=/dev/null ;;
+	esac
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+	*$lt_bad_file* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break 2
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break 2
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS=$lt_save_ifs
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test no != "$lt_cv_path_NM"; then
+  NM=$lt_cv_path_NM
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols -headers"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test : != "$DUMPBIN"; then
+    NM=$DUMPBIN
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring=ABCD
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+       test undefined != "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test 17 != "$i" # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n "$lt_cv_sys_max_cmd_len"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test yes != "$GCC"; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test yes = "$GCC"; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# 'unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd* | bitrig*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+os2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh;
+  # decide which one to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd=$ECHO
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test 0 -eq "$ac_status"; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test 0 -ne "$ac_status"; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test no = "$lt_cv_ar_at_file"; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  bitrig* | openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test ia64 = "$host_cpu"; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  # Gets list of data symbols to import.
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+  # Adjust the below global symbol transforms to fixup imported variables.
+  lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+  lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
+  lt_c_name_lib_hook="\
+  -e 's/^I .* \(lib.*\)$/  {\"\1\", (void *) 0},/p'\
+  -e 's/^I .* \(.*\)$/  {\"lib\1\", (void *) 0},/p'"
+else
+  # Disable hooks by default.
+  lt_cv_sys_global_symbol_to_import=
+  lt_cdecl_hook=
+  lt_c_name_hook=
+  lt_c_name_lib_hook=
+fi
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"lib\1\", (void *) \&\1},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function,
+    # D for any global variable and I for any imported variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+"     {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+"     s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS=conftstm.$ac_objext
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest$ac_exeext; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test yes = "$pipe_works"; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case $with_sysroot in #(
+ yes)
+   if test yes = "$GCC"; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+  ac_path_lt_DD_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in dd; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+      $ac_path_lt_DD_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_lt_DD"; then
+    :
+  fi
+else
+  ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out what ABI is being produced by ac_compile, and set mode
+  # options accordingly.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE=32
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE=64
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test yes = "$lt_cv_prog_gnu_ld"; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+mips64*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    emul=elf
+    case `/usr/bin/file conftest.$ac_objext` in
+      *32-bit*)
+	emul="${emul}32"
+	;;
+      *64-bit*)
+	emul="${emul}64"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *MSB*)
+	emul="${emul}btsmip"
+	;;
+      *LSB*)
+	emul="${emul}ltsmip"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *N32*)
+	emul="${emul}n32"
+	;;
+    esac
+    LD="${LD-ld} -m $emul"
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.  Note that the listed cases only cover the
+  # situations where additional linker options are needed (such as when
+  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+  # vice versa); the common cases where no linker options are needed do
+  # not appear in the list.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
+	    ;;
+	  powerpc64le-*linux*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  powerpcle-*linux*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS=$CFLAGS
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test yes != "$lt_cv_cc_needs_belf"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS=$SAVE_CFLAGS
+  fi
+  ;;
+*-*solaris*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*|x86_64-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD=${LD-ld}_sol2
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks=$enable_libtool_lock
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test yes != "$lt_cv_path_mainfest_tool"; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "$LT_MULTI_MODULE"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.[012][,.]*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test yes = "$lt_cv_apple_cc_single_mod"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test yes = "$lt_cv_ld_exported_symbols_list"; then
+      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
+    fi
+    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+# Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else
+  enable_shared=no
+fi
+
+
+
+
+
+
+
+
+
+
+        enable_dlopen=no
+
+
+  enable_win32_dll=no
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for lt_pkg in $withval; do
+	IFS=$lt_save_ifs
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+  shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+  withval=$with_aix_soname; case $withval in
+    aix|svr4|both)
+      ;;
+    *)
+      as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+      ;;
+    esac
+    lt_cv_with_aix_soname=$with_aix_soname
+else
+  if ${lt_cv_with_aix_soname+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_with_aix_soname=aix
+fi
+
+    with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+  if test aix != "$with_aix_soname"; then
+    # For the AIX way of multilib, we name the shared archive member
+    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+    # the AIX toolchain works better with OBJECT_MODE set (default 32).
+    if test 64 = "${OBJECT_MODE-32}"; then
+      shared_archive_member_spec=shr_64
+    else
+      shared_archive_member_spec=shr
+    fi
+  fi
+  ;;
+*)
+  with_aix_soname=aix
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS=$ltmain
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}"; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test set != "${COLLECT_NAMES+set}"; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+old_CC=$CC
+old_CFLAGS=$CFLAGS
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/${ac_tool_prefix}file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
+  ;;
+esac
+fi
+
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/file"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
+  ;;
+esac
+fi
+
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC=$CC
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test yes = "$GCC"; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"  ## exclude from sc_useless_quotes_in_assignment
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test yes = "$GCC"; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        lt_prog_compiler_wl='-Wl,-Wl,,'
+        lt_prog_compiler_pic='-PIC'
+        lt_prog_compiler_static='-Bstatic'
+        ;;
+      esac
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static='$wl-static'
+	;;
+      esac
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='$wl-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+      case $cc_basename in
+      # old Intel for x86_64, which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms that do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"  ## exclude from sc_useless_quotes_in_assignment
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS=$LDFLAGS
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_static_works"; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test yes != "$GCC"; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd* | bitrig*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test yes = "$with_gnu_ld"; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test yes = "$lt_use_gnu_ld_interface"; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='$wl'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+    export_dynamic_flag_spec='$wl--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test ia64 != "$host_cpu"; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='$wl--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+      export_dynamic_flag_spec='$wl-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test linux-dietlibc = "$host_os"; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test no = "$tmp_diet"
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+
+        if test yes = "$supports_anon_versioning"; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	tcc*)
+	  export_dynamic_flag_spec='-rdynamic'
+	  ;;
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test yes = "$supports_anon_versioning"; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test no = "$ld_shlibs"; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test ia64 = "$host_cpu"; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	hardcode_direct=no
+	hardcode_direct_absolute=no
+	;;
+      esac
+
+      if test yes = "$GCC"; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`$CC -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
+	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
+      else
+	# not using gcc
+	if test ia64 = "$host_cpu"; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
+	  else
+	    shared_flag='$wl-bM:SRE'
+	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
+	fi
+      fi
+
+      export_dynamic_flag_spec='$wl-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+      else
+	if test ia64 = "$host_cpu"; then
+	  hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' $wl-bernotok'
+	  allow_undefined_flag=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    archive_expsym_cmds="$archive_expsym_cmds"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=.dll
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	archive_expsym_cmds='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=.dll
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag=$_lt_dar_allow_undefined
+  case $cc_basename in
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test yes = "$_lt_dar_can_shared"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test yes = "$GCC"; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='$wl-E'
+      ;;
+
+    hpux10*)
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='$wl-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS=$LDFLAGS
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test yes = "$lt_cv_prog_compiler__b"; then
+    archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test no = "$with_gnu_ld"; then
+	hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='$wl-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS=$save_LDFLAGS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	ld_shlibs=yes
+	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      esac
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd* | bitrig*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+	  export_dynamic_flag_spec='$wl-E'
+	else
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      shrext_cmds=.dll
+      archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
+    osf3*)
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test yes = "$GCC"; then
+	allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+	archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='$wl'
+	  archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test yes = "$GCC"; then
+	  whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test sequent = "$host_vendor"; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='$wl-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We CANNOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='$wl-z,text'
+      allow_undefined_flag='$wl-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='$wl-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='$wl-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test yes = "$GCC"; then
+	archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test sni = "$host_vendor"; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='$wl-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test no = "$ld_shlibs" && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test yes,yes = "$GCC,$enable_shared"; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test yes = "$GCC"; then
+  case $host_os in
+    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+    *) lt_awk_arg='/^libraries:/' ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+    *) lt_sed_strip_eq='s|=/|/|g' ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary...
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  # ...but if some path component already ends with the multilib dir we assume
+  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+  case "$lt_multi_os_dir; $lt_search_path_spec " in
+  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+    lt_multi_os_dir=
+    ;;
+  esac
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+    elif test -n "$lt_multi_os_dir"; then
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS = " "; FS = "/|\n";} {
+  lt_foo = "";
+  lt_count = 0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo = "/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='$libname$release$shared_ext$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test ia64 = "$host_cpu"; then
+    # AIX 5 supports IA64
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='$libname$shared_ext'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec=$LIB
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+    fi
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test yes = "$lt_cv_prog_gnu_ld"; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec='-L$libdir'
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd* | bitrig*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec=/usr/lib
+  need_lib_prefix=no
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
+  else
+    need_version=yes
+  fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+os2*)
+  libname_spec='$name'
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test yes = "$with_gnu_ld"; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec; then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=sco
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test yes = "$with_gnu_ld"; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test yes = "$hardcode_automatic"; then
+
+  # We can hardcode non-existent directories.
+  if test no != "$hardcode_direct" &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+     test no != "$hardcode_minus_L"; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test relink = "$hardcode_action" ||
+   test yes = "$inherit_rpath"; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test yes != "$enable_dlopen"; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen=load_add_on
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen=LoadLibrary
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+    # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
+else
+
+    lt_cv_dlopen=dyld
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  tpf*)
+    # Don't try to run any link tests for TPF.  We know it's impossible
+    # because TPF is a cross-compiler, and we know how we open DSOs.
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=no
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen=shl_load
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen=dlopen
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test no = "$lt_cv_dlopen"; then
+    enable_dlopen=no
+  else
+    enable_dlopen=yes
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS=$CPPFLAGS
+    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS=$LDFLAGS
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS=$LIBS
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test yes = "$cross_compiling"; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test yes = "$lt_cv_dlopen_self"; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test yes = "$cross_compiling"; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS=$save_CPPFLAGS
+    LDFLAGS=$save_LDFLAGS
+    LIBS=$save_LIBS
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP"; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report what library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test no = "$can_build_shared" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test yes = "$enable_shared" && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test ia64 != "$host_cpu"; then
+      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+      yes,aix,yes) ;;			# shared object as lib.so file only
+      yes,svr4,*) ;;			# shared object as lib.so archive member only
+      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+      esac
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test yes = "$enable_shared" || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC=$lt_save_CC
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+  if test "$enable_shared" = "yes" && test -z "$DPKG_DEVEL_MODE"; then :
+
+    as_fn_error $? "building libdpkg as a shared library is not supported" "$LINENO" 5
+
+fi
+   if test "$enable_shared" = "yes"; then
+  BUILD_SHARED_TRUE=
+  BUILD_SHARED_FALSE='#'
+else
+  BUILD_SHARED_TRUE='#'
+  BUILD_SHARED_FALSE=
+fi
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for --as-needed linker flag" >&5
+$as_echo_n "checking for --as-needed linker flag... " >&6; }
+if ${dpkg_cv_linker_as_needed+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    save_LDFLAGS=$LDFLAGS
+    LDFLAGS="$LDFLAGS -Wl,--as-needed"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+      dpkg_cv_linker_as_needed=yes
+
+else
+
+      dpkg_cv_linker_as_needed=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_linker_as_needed" >&5
+$as_echo "$dpkg_cv_linker_as_needed" >&6; }
+   if test "x$dpkg_cv_linker_as_needed" = "xyes"; then
+  HAVE_LINKER_AS_NEEDED_TRUE=
+  HAVE_LINKER_AS_NEEDED_FALSE='#'
+else
+  HAVE_LINKER_AS_NEEDED_TRUE='#'
+  HAVE_LINKER_AS_NEEDED_FALSE=
+fi
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for --version-script linker flag" >&5
+$as_echo_n "checking for --version-script linker flag... " >&6; }
+if ${dpkg_cv_version_script+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    echo "{ global: symbol; local: *; };" >conftest.map
+    save_LDFLAGS=$LDFLAGS
+    LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+      dpkg_cv_version_script=yes
+
+else
+
+      dpkg_cv_version_script=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS="$save_LDFLAGS"
+    rm -f conftest.map
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_version_script" >&5
+$as_echo "$dpkg_cv_version_script" >&6; }
+   if test "x$dpkg_cv_version_script" = "xyes"; then
+  HAVE_LINKER_VERSION_SCRIPT_TRUE=
+  HAVE_LINKER_VERSION_SCRIPT_FALSE='#'
+else
+  HAVE_LINKER_VERSION_SCRIPT_TRUE='#'
+  HAVE_LINKER_VERSION_SCRIPT_FALSE=
+fi
+
+
+
+# Allow compilation without optional programs
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build dselect" >&5
+$as_echo_n "checking whether to build dselect... " >&6; }
+  # Check whether --enable-dselect was given.
+if test "${enable_dselect+set}" = set; then :
+  enableval=$enable_dselect; build_dselect=$enable_dselect
+else
+  build_dselect=yes
+fi
+
+   if test "x$build_dselect" = "xyes"; then
+  BUILD_DSELECT_TRUE=
+  BUILD_DSELECT_FALSE='#'
+else
+  BUILD_DSELECT_TRUE='#'
+  BUILD_DSELECT_FALSE=
+fi
+
+  if test "x$build_dselect" = "xyes"; then :
+
+
+$as_echo "#define BUILD_DSELECT 1" >>confdefs.h
+
+
+else
+
+    $as_echo "#define BUILD_DSELECT 0" >>confdefs.h
+
+
+fi
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $build_dselect" >&5
+$as_echo "$build_dselect" >&6; }
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build start-stop-daemon" >&5
+$as_echo_n "checking whether to build start-stop-daemon... " >&6; }
+  # Check whether --enable-start-stop-daemon was given.
+if test "${enable_start_stop_daemon+set}" = set; then :
+  enableval=$enable_start_stop_daemon; build_start_stop_daemon=$enable_start_stop_daemon
+else
+  build_start_stop_daemon=yes
+fi
+
+   if test "x$build_start_stop_daemon" = "xyes"; then
+  BUILD_START_STOP_DAEMON_TRUE=
+  BUILD_START_STOP_DAEMON_FALSE='#'
+else
+  BUILD_START_STOP_DAEMON_TRUE='#'
+  BUILD_START_STOP_DAEMON_FALSE=
+fi
+
+  if test "x$build_start_stop_daemon" = "xyes"; then :
+
+
+$as_echo "#define BUILD_START_STOP_DAEMON 1" >>confdefs.h
+
+
+else
+
+    $as_echo "#define BUILD_START_STOP_DAEMON 0" >>confdefs.h
+
+
+fi
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $build_start_stop_daemon" >&5
+$as_echo "$build_start_stop_daemon" >&6; }
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build update-alternatives" >&5
+$as_echo_n "checking whether to build update-alternatives... " >&6; }
+  # Check whether --enable-update-alternatives was given.
+if test "${enable_update_alternatives+set}" = set; then :
+  enableval=$enable_update_alternatives; build_update_alternatives=$enable_update_alternatives
+else
+  build_update_alternatives=yes
+fi
+
+   if test "x$build_update_alternatives" = "xyes"; then
+  BUILD_UPDATE_ALTERNATIVES_TRUE=
+  BUILD_UPDATE_ALTERNATIVES_FALSE='#'
+else
+  BUILD_UPDATE_ALTERNATIVES_TRUE='#'
+  BUILD_UPDATE_ALTERNATIVES_FALSE=
+fi
+
+  if test "x$build_update_alternatives" = "xyes"; then :
+
+
+$as_echo "#define BUILD_UPDATE_ALTERNATIVES 1" >>confdefs.h
+
+
+else
+
+    $as_echo "#define BUILD_UPDATE_ALTERNATIVES 0" >>confdefs.h
+
+
+fi
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $build_update_alternatives" >&5
+$as_echo "$build_update_alternatives" >&6; }
+
+
+
+
+  PERL_MIN_VERSION=5.24.1
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.24.1" >&5
+$as_echo_n "checking for perl >= 5.24.1... " >&6; }
+if ${ac_cv_path_PERL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    if test -z "$PERL"; then
+  ac_path_PERL_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in perl; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_PERL="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_PERL" || continue
+
+      perlcheck=$(test -x $ac_path_PERL && \
+                  $ac_path_PERL -MConfig -Mversion -e \
+                  'my $r = qv("v$Config{version}") >= qv("5.24.1");
+                   print "yes" if $r')
+      if test "x$perlcheck" = "xyes"; then :
+
+        ac_cv_path_PERL=$ac_path_PERL ac_path_PERL_found=:
+
+fi
+
+      $ac_path_PERL_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_PERL"; then
+
+      as_fn_error $? "cannot find perl >= 5.24.1" "$LINENO" 5
+
+  fi
+else
+  ac_cv_path_PERL=$PERL
+fi
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_PERL" >&5
+$as_echo "$ac_cv_path_PERL" >&6; }
+  PERL=$ac_cv_path_PERL
+
+    # Let the user override the variable.
+  if test -z "$PERL_LIBDIR"; then :
+
+    PERL_LIBDIR=$($PERL -MConfig -e \
+                        'my $r = $Config{vendorlibexp};
+                         $r =~ s/$Config{vendorprefixexp}/\$(prefix)/;
+                         print $r')
+
+fi
+
+
+
+  TIMESTAMP=$(PERL=$PERL $srcdir/run-script scripts/dpkg-parsechangelog.pl -l$srcdir/debian/changelog -STimestamp)
+  PACKAGE_RELEASE_DATE=$($PERL -MPOSIX -e "print POSIX::strftime('%Y-%m-%d', gmtime('$TIMESTAMP'));")
+
+
+
+  # Check whether --enable-devel-docs was given.
+if test "${enable_devel_docs+set}" = set; then :
+  enableval=$enable_devel_docs; build_devel_docs=$enable_devel_docs
+else
+  build_devel_docs=yes
+
+fi
+
+  if test "x$build_devel_docs" = "xyes"; then :
+
+    BUILD_DEVEL_DOCS=YES
+
+
+else
+
+    BUILD_DEVEL_DOCS=NO
+
+
+fi
+
+
+# Allow alternate directories
+
+  devlibdir="${libdir}"
+
+# Check whether --with-devlibdir was given.
+if test "${with_devlibdir+set}" = set; then :
+  withval=$with_devlibdir;
+    case $with_devlibdir in #(
+  "") :
+    as_fn_error $? "invalid devlibdir specified" "$LINENO" 5 ;; #(
+  *) :
+    devlibdir="$with_devlibdir" ;;
+esac
+
+fi
+
+
+
+
+  pkgconfdir="${sysconfdir}/${PACKAGE_NAME}"
+
+# Check whether --with-pkgconfdir was given.
+if test "${with_pkgconfdir+set}" = set; then :
+  withval=$with_pkgconfdir;
+    case $with_pkgconfdir in #(
+  "") :
+    as_fn_error $? "invalid pkgconfdir specified" "$LINENO" 5 ;; #(
+  *) :
+    pkgconfdir="$with_pkgconfdir" ;;
+esac
+
+fi
+
+
+
+
+  admindir="${localstatedir}/lib/${PACKAGE_NAME}"
+
+# Check whether --with-admindir was given.
+if test "${with_admindir+set}" = set; then :
+  withval=$with_admindir;
+    case $with_admindir in #(
+  "") :
+    as_fn_error $? "invalid admindir specified" "$LINENO" 5 ;; #(
+  *) :
+    admindir="$with_admindir" ;;
+esac
+
+fi
+
+
+
+
+  logdir="${localstatedir}/log"
+
+# Check whether --with-logdir was given.
+if test "${with_logdir+set}" = set; then :
+  withval=$with_logdir;
+    case $with_logdir in #(
+  "") :
+    as_fn_error $? "invalid logdir specified" "$LINENO" 5 ;; #(
+  *) :
+    logdir="$with_logdir" ;;
+esac
+
+fi
+
+
+
+
+# Set default dpkg-deb values
+
+
+# Check whether --with-dpkg-deb-compressor was given.
+if test "${with_dpkg_deb_compressor+set}" = set; then :
+  withval=$with_dpkg_deb_compressor; with_dpkg_deb_compressor=$withval
+else
+  with_dpkg_deb_compressor=xz
+fi
+
+  case $with_dpkg_deb_compressor in #(
+  gzip|xz) :
+    : ;; #(
+  *) :
+    as_fn_error $? "unsupported default compressor $with_dpkg_deb_compressor" "$LINENO" 5 ;;
+esac
+
+cat >>confdefs.h <<_ACEOF
+#define DPKG_DEB_DEFAULT_COMPRESSOR COMPRESSOR_TYPE_`$as_echo "${with_dpkg_deb_compressor}" | $as_tr_cpp`
+_ACEOF
+
+
+
+
+  for ac_prog in gnutar gtar tar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_TAR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$TAR"; then
+  ac_cv_prog_TAR="$TAR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_TAR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+TAR=$ac_cv_prog_TAR
+if test -n "$TAR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAR" >&5
+$as_echo "$TAR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$TAR" && break
+done
+test -n "$TAR" || TAR="tar"
+
+  if ! $TAR --version 2>/dev/null | grep -q '^tar (GNU tar)'; then :
+
+    as_fn_error $? "cannot find a GNU tar program" "$LINENO" 5
+
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define TAR "$TAR"
+_ACEOF
+
+
+
+# Checks for programs.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+  # Make sure it works both with $CC and with simple cc.
+  # Following AC_PROG_CC_C_O, we do the test twice because some
+  # compilers refuse to overwrite an existing .o file with -o,
+  # though they will create one.
+  am_cv_prog_cc_c_o=yes
+  for am_i in 1 2; do
+    if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+   ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } \
+         && test -f conftest2.$ac_objext; then
+      : OK
+    else
+      am_cv_prog_cc_c_o=no
+      break
+    fi
+  done
+  rm -f core conftest*
+  unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC supports C99 features" >&5
+$as_echo_n "checking whether $CC supports C99 features... " >&6; }
+if ${dpkg_cv_c99+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+#include <inttypes.h>
+#include <stdbool.h>
+#include <stdio.h>
+
+/* Variadic macro arguments. */
+#define variadic_macro(foo, ...) printf(foo, __VA_ARGS__)
+
+int
+main ()
+{
+
+	int rc;
+
+	/* Designated initializers. */
+	struct { int a, b; } foo = { .a = 1, .b = 2 };
+
+	/* Compound literals. */
+	struct point { int x, y; } p = (struct point){ .x = 0, .y = 1 };
+	p = (struct point){ .x = 2, .y = 4 };
+
+	/* Trailing comma in enum. */
+	enum { FIRST, SECOND, } quux;
+
+	/* Boolean type. */
+	bool bar = false;
+
+	/* Specific size type. */
+	uint32_t baz = 0;
+	size_t size = SIZE_MAX;
+	intmax_t imax = INTMAX_MAX;
+
+	/* Format modifiers. */
+	rc = printf("%jd", imax);
+	if (rc == 3)
+		return 1;
+	rc = printf("%zu", size);
+	if (rc == 3)
+		return 1;
+
+	/* Magic __func__ variable. */
+	printf("%s", __func__);
+
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  dpkg_cv_c99=yes
+else
+  dpkg_cv_c99=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_c99" >&5
+$as_echo "$dpkg_cv_c99" >&6; }
+  if test "x$dpkg_cv_c99" != "xyes"; then :
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept C99 features" >&5
+$as_echo_n "checking for $CC option to accept C99 features... " >&6; }
+if ${dpkg_cv_c99_arg+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+      dpkg_cv_c99_arg=none
+      dpkg_save_CC="$CC"
+      for arg in "-std=gnu99" "-std=c99" "-c99" "-AC99" "-xc99=all" \
+                 "-qlanglvl=extc99"; do
+        CC="$dpkg_save_CC $arg"
+
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+#include <inttypes.h>
+#include <stdbool.h>
+#include <stdio.h>
+
+/* Variadic macro arguments. */
+#define variadic_macro(foo, ...) printf(foo, __VA_ARGS__)
+
+int
+main ()
+{
+
+	int rc;
+
+	/* Designated initializers. */
+	struct { int a, b; } foo = { .a = 1, .b = 2 };
+
+	/* Compound literals. */
+	struct point { int x, y; } p = (struct point){ .x = 0, .y = 1 };
+	p = (struct point){ .x = 2, .y = 4 };
+
+	/* Trailing comma in enum. */
+	enum { FIRST, SECOND, } quux;
+
+	/* Boolean type. */
+	bool bar = false;
+
+	/* Specific size type. */
+	uint32_t baz = 0;
+	size_t size = SIZE_MAX;
+	intmax_t imax = INTMAX_MAX;
+
+	/* Format modifiers. */
+	rc = printf("%jd", imax);
+	if (rc == 3)
+		return 1;
+	rc = printf("%zu", size);
+	if (rc == 3)
+		return 1;
+
+	/* Magic __func__ variable. */
+	printf("%s", __func__);
+
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  dpkg_arg_worked=yes
+else
+  dpkg_arg_worked=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+        CC="$dpkg_save_CC"
+
+        if test "x$dpkg_arg_worked" = "xyes"; then :
+
+          dpkg_cv_c99_arg="$arg"
+          break
+
+fi
+      done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_c99_arg" >&5
+$as_echo "$dpkg_cv_c99_arg" >&6; }
+    if test "x$dpkg_cv_c99_arg" != "xnone"; then :
+
+      CC="$CC $dpkg_cv_c99_arg"
+      dpkg_cv_c99=1
+
+fi
+
+fi
+  if test "x$dpkg_cv_c99" = "xyes"; then :
+
+
+$as_echo "#define HAVE_C99 1" >>confdefs.h
+
+
+else
+
+    as_fn_error $? "unsupported required C99 extensions" "$LINENO" 5
+
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+  if test -n "$CCC"; then
+    CXX=$CCC
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CXX"; then
+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CXX" && break
+  done
+fi
+if test -z "$CXX"; then
+  ac_ct_CXX=$CXX
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CXX"; then
+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_ac_ct_CXX="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CXX" && break
+done
+
+  if test "x$ac_ct_CXX" = x; then
+    CXX="g++"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CXX=$ac_ct_CXX
+  fi
+fi
+
+  fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GXX=yes
+else
+  GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if ${ac_cv_prog_cxx_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+   ac_cxx_werror_flag=yes
+   ac_cv_prog_cxx_g=no
+   CXXFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+else
+  CXXFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+	 CXXFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+  CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+  if test "$GXX" = yes; then
+    CXXFLAGS="-g -O2"
+  else
+    CXXFLAGS="-g"
+  fi
+else
+  if test "$GXX" = yes; then
+    CXXFLAGS="-O2"
+  else
+    CXXFLAGS=
+  fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CXX"  am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named 'D' -- because '-MD' means "put the output
+  # in D".
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CXX_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+      # Solaris 10 /bin/sh.
+      echo '/* dummy */' > sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with '-c' and '-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle '-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs.
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # After this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested.
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+      # This compiler won't grok '-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CXX_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+  am__fastdepCXX_TRUE=
+  am__fastdepCXX_FALSE='#'
+else
+  am__fastdepCXX_TRUE='#'
+  am__fastdepCXX_FALSE=
+fi
+
+
+
+
+func_stripname_cnf ()
+{
+  case $2 in
+  .*) func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%\\\\$2\$%%"`;;
+  *)  func_stripname_result=`$ECHO "$3" | $SED "s%^$1%%; s%$2\$%%"`;;
+  esac
+} # func_stripname_cnf
+
+      if test -n "$CXX" && ( test no != "$CXX" &&
+    ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+    (test g++ != "$CXX"))); then
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+  if ${ac_cv_prog_CXXCPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+else
+  _lt_caught_CXX_error=yes
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_caught_CXX_error"; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+  # save warnings/boilerplate of simple test code
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
+  compiler=$CC
+  compiler_CXX=$CC
+  func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
+
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test yes = "$GXX"; then
+      lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+    else
+      lt_prog_compiler_no_builtin_flag_CXX=
+    fi
+
+    if test yes = "$GXX"; then
+      # Set up default GNU C++ configuration
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test yes = "$GCC"; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return, which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD=$ac_prog
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test yes = "$with_gnu_ld"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD=$ac_dir/$ac_prog
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test no != "$with_gnu_ld" && break
+	;;
+      *)
+	test yes != "$with_gnu_ld" && break
+	;;
+      esac
+    fi
+  done
+  IFS=$lt_save_ifs
+else
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi
+fi
+
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test yes = "$with_gnu_ld"; then
+        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+        export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='$wl'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+        else
+          whole_archive_flag_spec_CXX=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+    ld_shlibs_CXX=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+      aix[4-9]*)
+        if test ia64 = "$host_cpu"; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # have runtime linking enabled, and use it for executables.
+          # For shared libraries, we enable/disable runtime linking
+          # depending on the kind of the shared library created -
+          # when "with_aix_soname,aix_use_runtimelinking" is:
+          # "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "aix,yes"  lib.so          shared, rtl:yes, for executables
+          #            lib.a           static archive
+          # "both,no"  lib.so.V(shr.o) shared, rtl:yes
+          #            lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a(lib.so.V) shared, rtl:no
+          # "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a           static archive
+          case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	      # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	      # so we don't have lib.a shared libs to link our executables.
+	      # We have to force runtime linking in this case.
+	      aix_use_runtimelinking=yes
+	      LDFLAGS="$LDFLAGS -Wl,-brtl"
+	    fi
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        archive_cmds_CXX=''
+        hardcode_direct_CXX=yes
+        hardcode_direct_absolute_CXX=yes
+        hardcode_libdir_separator_CXX=':'
+        link_all_deplibs_CXX=yes
+        file_list_spec_CXX='$wl-f,'
+        case $with_aix_soname,$aix_use_runtimelinking in
+        aix,*) ;;	# no import file
+        svr4,* | *,yes) # use import file
+          # The Import File defines what to hardcode.
+          hardcode_direct_CXX=no
+          hardcode_direct_absolute_CXX=no
+          ;;
+        esac
+
+        if test yes = "$GXX"; then
+          case $host_os in aix4.[012]|aix4.[012].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`$CC -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    hardcode_direct_CXX=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    hardcode_minus_L_CXX=yes
+	    hardcode_libdir_flag_spec_CXX='-L$libdir'
+	    hardcode_libdir_separator_CXX=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag=$shared_flag' $wl-G'
+	  fi
+	  # Need to ensure runtime linking is disabled for the traditional
+	  # shared library, or the linker may eventually find shared libraries
+	  # /with/ Import File - we do not want to mix them.
+	  shared_flag_aix='-shared'
+	  shared_flag_svr4='-shared $wl-G'
+        else
+          # not using gcc
+          if test ia64 = "$host_cpu"; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test yes = "$aix_use_runtimelinking"; then
+	      shared_flag='$wl-G'
+	    else
+	      shared_flag='$wl-bM:SRE'
+	    fi
+	    shared_flag_aix='$wl-bM:SRE'
+	    shared_flag_svr4='$wl-G'
+          fi
+        fi
+
+        export_dynamic_flag_spec_CXX='$wl-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        always_export_symbols_CXX=yes
+	if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          # The "-G" linker flag allows undefined symbols.
+          no_undefined_flag_CXX='-bernotok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+          hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
+
+          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+        else
+          if test ia64 = "$host_cpu"; then
+	    hardcode_libdir_flag_spec_CXX='$wl-R $libdir:/usr/lib:/lib'
+	    allow_undefined_flag_CXX="-z nodefs"
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=/usr/lib:/lib
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+	    hardcode_libdir_flag_spec_CXX='$wl-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    no_undefined_flag_CXX=' $wl-bernotok'
+	    allow_undefined_flag_CXX=' $wl-berok'
+	    if test yes = "$with_gnu_ld"; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      whole_archive_flag_spec_CXX='$convenience'
+	    fi
+	    archive_cmds_need_lc_CXX=yes
+	    archive_expsym_cmds_CXX='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	    # -brtl affects multiple linker settings, -berok does not and is overridden later
+	    compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+	    if test svr4 != "$with_aix_soname"; then
+	      # This is similar to how AIX traditionally builds its shared
+	      # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	    fi
+	    if test aix != "$with_aix_soname"; then
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	    else
+	      # used by -dlpreopen to get the symbols
+	      archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	    fi
+	    archive_expsym_cmds_CXX="$archive_expsym_cmds_CXX"'~$RM -r $output_objdir/$realname.d'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  allow_undefined_flag_CXX=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX=' '
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=yes
+	  file_list_spec_CXX='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=.dll
+	  # FIXME: Setting linknames here is a bad hack.
+	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	  archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp "$export_symbols" "$output_objdir/$soname.def";
+              echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+            else
+              $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+            fi~
+            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+            linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
+	  enable_shared_with_static_runtimes_CXX=yes
+	  # Don't use ranlib
+	  old_postinstall_cmds_CXX='chmod 644 $oldlib'
+	  postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
+            lt_tool_outputfile="@TOOL_OUTPUT@"~
+            case $lt_outputfile in
+              *.exe|*.EXE) ;;
+              *)
+                lt_outputfile=$lt_outputfile.exe
+                lt_tool_outputfile=$lt_tool_outputfile.exe
+                ;;
+            esac~
+            func_to_tool_file "$lt_outputfile"~
+            if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+              $RM "$lt_outputfile.manifest";
+            fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
+	  export_dynamic_flag_spec_CXX='$wl--export-all-symbols'
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=no
+	  enable_shared_with_static_runtimes_CXX=yes
+
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file, use it as
+	    # is; otherwise, prepend EXPORTS...
+	    archive_expsym_cmds_CXX='if   test DEF = "`$SED -n     -e '\''s/^[	 ]*//'\''     -e '\''/^\(;.*\)*$/d'\''     -e '\''s/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p'\''     -e q     $export_symbols`" ; then
+              cp $export_symbols $output_objdir/$soname.def;
+            else
+              echo EXPORTS > $output_objdir/$soname.def;
+              cat $export_symbols >> $output_objdir/$soname.def;
+            fi~
+            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    ld_shlibs_CXX=no
+	  fi
+	  ;;
+	esac
+	;;
+      darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc_CXX=no
+  hardcode_direct_CXX=no
+  hardcode_automatic_CXX=yes
+  hardcode_shlibpath_var_CXX=unsupported
+  if test yes = "$lt_cv_ld_force_load"; then
+    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec_CXX=''
+  fi
+  link_all_deplibs_CXX=yes
+  allow_undefined_flag_CXX=$_lt_dar_allow_undefined
+  case $cc_basename in
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test yes = "$_lt_dar_can_shared"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    module_expsym_cmds_CXX="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+       if test yes != "$lt_cv_apple_cc_single_mod"; then
+      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+      archive_expsym_cmds_CXX="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
+    fi
+
+  else
+  ld_shlibs_CXX=no
+  fi
+
+	;;
+
+      os2*)
+	hardcode_libdir_flag_spec_CXX='-L$libdir'
+	hardcode_minus_L_CXX=yes
+	allow_undefined_flag_CXX=unsupported
+	shrext_cmds=.dll
+	archive_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	archive_expsym_cmds_CXX='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  prefix_cmds="$SED"~
+	  if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	    prefix_cmds="$prefix_cmds -e 1d";
+	  fi~
+	  prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	  cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	old_archive_From_new_cmds_CXX='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+	enable_shared_with_static_runtimes_CXX=yes
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      freebsd2.*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        ld_shlibs_CXX=no
+        ;;
+
+      freebsd-elf*)
+        archive_cmds_need_lc_CXX=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        ld_shlibs_CXX=yes
+        ;;
+
+      haiku*)
+        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+        link_all_deplibs_CXX=yes
+        ;;
+
+      hpux9*)
+        hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
+        hardcode_libdir_separator_CXX=:
+        export_dynamic_flag_spec_CXX='$wl-E'
+        hardcode_direct_CXX=yes
+        hardcode_minus_L_CXX=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            ld_shlibs_CXX=no
+            ;;
+          aCC*)
+            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            ;;
+          *)
+            if test yes = "$GXX"; then
+              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              ld_shlibs_CXX=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test no = "$with_gnu_ld"; then
+	  hardcode_libdir_flag_spec_CXX='$wl+b $wl$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      export_dynamic_flag_spec_CXX='$wl-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct_CXX=no
+            hardcode_shlibpath_var_CXX=no
+            ;;
+          *)
+            hardcode_direct_CXX=yes
+            hardcode_direct_absolute_CXX=yes
+            hardcode_minus_L_CXX=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        archive_cmds_CXX='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+          *)
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        case $host_cpu in
+	          hppa*64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[3-9]*)
+	hardcode_direct_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='$wl-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_expsym_cmds_CXX='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	      else
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
+	      fi
+	    fi
+	    link_all_deplibs_CXX=yes
+	    ;;
+        esac
+        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+        hardcode_libdir_separator_CXX=:
+        inherit_rpath_CXX=yes
+        ;;
+
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    archive_cmds_need_lc_CXX=no
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive$convenience $wl--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
+	      prelink_cmds_CXX='tpldir=Template.dir~
+               rm -rf $tpldir~
+               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+               compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+	      old_archive_cmds_CXX='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+                $RANLIB $oldlib'
+	      archive_cmds_CXX='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      archive_expsym_cmds_CXX='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 and above use weak symbols
+	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    hardcode_libdir_flag_spec_CXX='$wl--rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    whole_archive_flag_spec_CXX='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname  -o $lib $wl-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    ;;
+	  xl* | mpixl* | bgxl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+	    export_dynamic_flag_spec_CXX='$wl--export-dynamic'
+	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    if test yes = "$supports_anon_versioning"; then
+	      archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+                cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+                echo "local: *; };" >> $output_objdir/$libname.ver~
+                $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      no_undefined_flag_CXX=' -zdefs'
+	      archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      archive_expsym_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
+	      hardcode_libdir_flag_spec_CXX='-R$libdir'
+	      whole_archive_flag_spec_CXX='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	      compiler_needs_object_CXX=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='func_echo_all'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  hardcode_libdir_flag_spec_CXX='-R$libdir'
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        ld_shlibs_CXX=yes
+	;;
+
+      openbsd* | bitrig*)
+	if test -f /usr/libexec/ld.so; then
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	  hardcode_direct_absolute_CXX=yes
+	  archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+	    export_dynamic_flag_spec_CXX='$wl-E'
+	    whole_archive_flag_spec_CXX=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=func_echo_all
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    hardcode_libdir_flag_spec_CXX='$wl-rpath,$libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+		;;
+	      *)
+	        allow_undefined_flag_CXX=' -expect_unresolved \*'
+	        archive_cmds_CXX='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+                  echo "-hidden">> $lib.exp~
+                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+                  $RM $lib.exp'
+	        hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+		;;
+	    esac
+
+	    hardcode_libdir_separator_CXX=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+	  *)
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      allow_undefined_flag_CXX=' $wl-expect_unresolved $wl\*'
+	      case $host in
+	        osf3*)
+	          archive_cmds_CXX='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+		  ;;
+	        *)
+	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      hardcode_libdir_flag_spec_CXX='$wl-rpath $wl$libdir'
+	      hardcode_libdir_separator_CXX=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            archive_cmds_need_lc_CXX=yes
+	    no_undefined_flag_CXX=' -zdefs'
+	    archive_cmds_CXX='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+              $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    hardcode_libdir_flag_spec_CXX='-R$libdir'
+	    hardcode_shlibpath_var_CXX=no
+	    case $host_os in
+	      solaris2.[0-5] | solaris2.[0-5].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands '-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    link_all_deplibs_CXX=yes
+
+	    output_verbose_link_cmd='func_echo_all'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      no_undefined_flag_CXX=' $wl-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+                  $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
+	        # platform.
+	        archive_cmds_CXX='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+                  $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      fi
+
+	      hardcode_libdir_flag_spec_CXX='$wl-R $wl$libdir'
+	      case $host_os in
+		solaris2.[0-5] | solaris2.[0-5].*) ;;
+		*)
+		  whole_archive_flag_spec_CXX='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_CXX='$wl-z,text'
+      archive_cmds_need_lc_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We CANNOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	no_undefined_flag_CXX='$wl-z,text'
+	allow_undefined_flag_CXX='$wl-z,nodefs'
+	archive_cmds_need_lc_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='$wl-R,$libdir'
+	hardcode_libdir_separator_CXX=':'
+	link_all_deplibs_CXX=yes
+	export_dynamic_flag_spec_CXX='$wl-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    archive_cmds_CXX='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+              '"$old_archive_cmds_CXX"
+	    reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+              '"$reload_cmds_CXX"
+	    ;;
+	  *)
+	    archive_cmds_CXX='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+    esac
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+    test no = "$ld_shlibs_CXX" && can_build_shared=no
+
+    GCC_CXX=$GXX
+    LD_CXX=$LD
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $prev$p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test x-L = "$p" ||
+          test x-R = "$p"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test no = "$pre_test_object_deps_done"; then
+	 case $prev in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_CXX"; then
+	     compiler_lib_search_path_CXX=$prev$p
+	   else
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} $prev$p"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_CXX"; then
+	   postdeps_CXX=$prev$p
+	 else
+	   postdeps_CXX="${postdeps_CXX} $prev$p"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test no = "$pre_test_object_deps_done"; then
+	 if test -z "$predep_objects_CXX"; then
+	   predep_objects_CXX=$p
+	 else
+	   predep_objects_CXX="$predep_objects_CXX $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_CXX"; then
+	   postdep_objects_CXX=$p
+	 else
+	   postdep_objects_CXX="$postdep_objects_CXX $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
+esac
+
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | $SED -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+
+  # C++ specific cases for pic, static, wl, etc.
+  if test yes = "$GXX"; then
+    lt_prog_compiler_wl_CXX='-Wl,'
+    lt_prog_compiler_static_CXX='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_CXX='-Bstatic'
+      fi
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_CXX='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
+            lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      case $host_os in
+      os2*)
+	lt_prog_compiler_static_CXX='$wl-static'
+	;;
+      esac
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_CXX='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      lt_prog_compiler_pic_CXX=
+      ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_CXX=
+      ;;
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_CXX=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	lt_prog_compiler_pic_CXX='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_CXX='-fPIC -shared'
+      ;;
+    *)
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[4-9]*)
+	# All AIX code is PIC.
+	if test ia64 = "$host_cpu"; then
+	  # AIX 5 now supports IA64 processor
+	  lt_prog_compiler_static_CXX='-Bstatic'
+	else
+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+	    if test ia64 != "$host_cpu"; then
+	      lt_prog_compiler_pic_CXX='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='$wl-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      lt_prog_compiler_pic_CXX='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64, which still supported -KPIC.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-qpic'
+	    lt_prog_compiler_static_CXX='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      lt_prog_compiler_pic_CXX='-KPIC'
+	      lt_prog_compiler_static_CXX='-Bstatic'
+	      lt_prog_compiler_wl_CXX='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    lt_prog_compiler_pic_CXX='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        lt_prog_compiler_pic_CXX='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    lt_prog_compiler_wl_CXX='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    lt_prog_compiler_pic_CXX='-pic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	lt_prog_compiler_can_build_shared_CXX=no
+	;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms that do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_CXX=
+    ;;
+  *)
+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; }
+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_CXX=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"  ## exclude from sc_useless_quotes_in_assignment
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_CXX=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_pic_works_CXX"; then
+    case $lt_prog_compiler_pic_CXX in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+     esac
+else
+    lt_prog_compiler_pic_CXX=
+     lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_CXX=no
+   save_LDFLAGS=$LDFLAGS
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_static_works_CXX"; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o_CXX" && test no != "$need_locks"; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test no = "$hard_links"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  case $host_os in
+  aix[4-9]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+    # Without the "-l" option, or with the "-B" option, AIX nm treats
+    # weak defined symbols like other global defined symbols, whereas
+    # GNU nm marks them as "W".
+    # While the 'weak' keyword is ignored in the Export File, we need
+    # it in the Import File for the 'aix-soname' feature, so we have
+    # to replace the "-B" option with "-P" for AIX nm.
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+    else
+      export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    export_symbols_cmds_CXX=$ltdll_cmds
+    ;;
+  cygwin* | mingw* | cegcc*)
+    case $cc_basename in
+    cl*)
+      exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+      ;;
+    esac
+    ;;
+  *)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    ;;
+  esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test no = "$ld_shlibs_CXX" && can_build_shared=no
+
+with_gnu_ld_CXX=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_CXX=yes
+
+  if test yes,yes = "$GCC,$enable_shared"; then
+    case $archive_cmds_CXX in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_CXX
+	  pic_flag=$lt_prog_compiler_pic_CXX
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+	  allow_undefined_flag_CXX=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc_CXX=no
+	  else
+	    lt_cv_archive_cmds_need_lc_CXX=yes
+	  fi
+	  allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+      archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='$libname$release$shared_ext$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test ia64 = "$host_cpu"; then
+    # AIX 5 supports IA64
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a(lib.so.V)'
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='$libname$shared_ext'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec=$LIB
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+    fi
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test yes = "$lt_cv_prog_gnu_ld"; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  hardcode_libdir_flag_spec_CXX='-L$libdir'
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd* | bitrig*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec=/usr/lib
+  need_lib_prefix=no
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
+  else
+    need_version=yes
+  fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+os2*)
+  libname_spec='$name'
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test yes = "$with_gnu_ld"; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec; then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=sco
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test yes = "$with_gnu_ld"; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+   test -n "$runpath_var_CXX" ||
+   test yes = "$hardcode_automatic_CXX"; then
+
+  # We can hardcode non-existent directories.
+  if test no != "$hardcode_direct_CXX" &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" &&
+     test no != "$hardcode_minus_L_CXX"; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
+
+if test relink = "$hardcode_action_CXX" ||
+   test yes = "$inherit_rpath_CXX"; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test yes != "$_lt_caught_CXX_error"
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX supports C++11" >&5
+$as_echo_n "checking whether $CXX supports C++11... " >&6; }
+if ${dpkg_cv_cxx11+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+int
+main ()
+{
+
+	// Null pointer keyword.
+	void *ptr = nullptr;
+
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  dpkg_cv_cxx11=yes
+else
+  dpkg_cv_cxx11=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxx11" >&5
+$as_echo "$dpkg_cv_cxx11" >&6; }
+  if test "x$dpkg_cv_cxx11" != "xyes"; then :
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CXX option to accept C++11" >&5
+$as_echo_n "checking for $CXX option to accept C++11... " >&6; }
+if ${dpkg_cv_cxx11_arg+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+      dpkg_cv_cxx11_arg=none
+      dpkg_save_CXX="$CXX"
+      for arg in "-std=gnu++11" "-std=c++11"; do
+        CXX="$dpkg_save_CXX $arg"
+
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+int
+main ()
+{
+
+	// Null pointer keyword.
+	void *ptr = nullptr;
+
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  dpkg_arg_worked=yes
+else
+  dpkg_arg_worked=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+        CXX="$dpkg_save_CXX"
+
+        if test "x$dpkg_arg_worked" = "xyes"; then :
+
+          dpkg_cv_cxx11_arg="$arg"; break
+
+fi
+      done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxx11_arg" >&5
+$as_echo "$dpkg_cv_cxx11_arg" >&6; }
+    if test "x$dpkg_cv_cxx11_arg" != "xnone"; then :
+
+      CXX="$CXX $dpkg_cv_cxx11_arg"
+      dpkg_cv_cxx11=yes
+
+fi
+
+fi
+  if test "x$dpkg_cv_cxx11" = "xyes"; then :
+
+
+$as_echo "#define HAVE_CXX11 1" >>confdefs.h
+
+
+fi
+
+
+  for ac_prog in gpatch patch
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_PATCH+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$PATCH"; then
+  ac_cv_prog_PATCH="$PATCH" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_PATCH="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+PATCH=$ac_cv_prog_PATCH
+if test -n "$PATCH"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PATCH" >&5
+$as_echo "$PATCH" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$PATCH" && break
+done
+test -n "$PATCH" || PATCH="patch"
+
+  if ! $PATCH --version 2>/dev/null | grep -q '^GNU patch'; then :
+
+    as_fn_error $? "cannot find a GNU patch program" "$LINENO" 5
+
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define PATCH "$PATCH"
+_ACEOF
+
+
+for ac_prog in doxygen
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DOXYGEN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DOXYGEN"; then
+  ac_cv_prog_DOXYGEN="$DOXYGEN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_DOXYGEN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DOXYGEN=$ac_cv_prog_DOXYGEN
+if test -n "$DOXYGEN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DOXYGEN" >&5
+$as_echo "$DOXYGEN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$DOXYGEN" && break
+done
+
+# Extract the first word of "dot", so it can be a program name with args.
+set dummy dot; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_HAVE_DOT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$HAVE_DOT"; then
+  ac_cv_prog_HAVE_DOT="$HAVE_DOT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_HAVE_DOT="YES"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  test -z "$ac_cv_prog_HAVE_DOT" && ac_cv_prog_HAVE_DOT="NO"
+fi
+fi
+HAVE_DOT=$ac_cv_prog_HAVE_DOT
+if test -n "$HAVE_DOT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAVE_DOT" >&5
+$as_echo "$HAVE_DOT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for po4a >= 0.59" >&5
+$as_echo_n "checking for po4a >= 0.59... " >&6; }
+if ${ac_cv_path_PO4A+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    if test -z "$PO4A"; then
+  ac_path_PO4A_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in po4a; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_PO4A="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_PO4A" || continue
+
+      po4aversion=$(LC_ALL=C $ac_path_PO4A --version \
+                      | sed -ne 's/^po4a version \(.*\)\.$/\1/p')
+      as_arg_v1=$po4aversion
+as_arg_v2=0.59
+awk "$as_awk_strverscmp" v1="$as_arg_v1" v2="$as_arg_v2" /dev/null
+case $? in #(
+  1) :
+    po4acheck=no ;; #(
+  0) :
+    po4acheck=yes ;; #(
+  2) :
+    po4acheck=yes ;; #(
+  *) :
+     ;;
+esac
+      if test "x$po4acheck" = "xyes"; then :
+
+        ac_cv_path_PO4A=$ac_path_PO4A ac_path_PO4A_found=:
+
+fi
+
+      $ac_path_PO4A_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_PO4A"; then
+
+      ac_cv_path_PO4A=no
+
+  fi
+else
+  ac_cv_path_PO4A=$PO4A
+fi
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_PO4A" >&5
+$as_echo "$ac_cv_path_PO4A" >&6; }
+  PO4A=$ac_cv_path_PO4A
+
+
+  if test "$USE_NLS" = "yes" && test "$ac_cv_path_PO4A" != "no"; then :
+
+    USE_PO4A=yes
+
+else
+
+    USE_PO4A=no
+
+fi
+
+
+
+
+  PERL_MIN_VERSION=5.24.1
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for perl >= 5.24.1" >&5
+$as_echo_n "checking for perl >= 5.24.1... " >&6; }
+if ${ac_cv_path_PERL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    if test -z "$PERL"; then
+  ac_path_PERL_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in perl; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_PERL="$as_dir/$ac_prog$ac_exec_ext"
+      as_fn_executable_p "$ac_path_PERL" || continue
+
+      perlcheck=$(test -x $ac_path_PERL && \
+                  $ac_path_PERL -MConfig -Mversion -e \
+                  'my $r = qv("v$Config{version}") >= qv("5.24.1");
+                   print "yes" if $r')
+      if test "x$perlcheck" = "xyes"; then :
+
+        ac_cv_path_PERL=$ac_path_PERL ac_path_PERL_found=:
+
+fi
+
+      $ac_path_PERL_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_PERL"; then
+
+      as_fn_error $? "cannot find perl >= 5.24.1" "$LINENO" 5
+
+  fi
+else
+  ac_cv_path_PERL=$PERL
+fi
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_PERL" >&5
+$as_echo "$ac_cv_path_PERL" >&6; }
+  PERL=$ac_cv_path_PERL
+
+    # Let the user override the variable.
+  if test -z "$PERL_LIBDIR"; then :
+
+    PERL_LIBDIR=$($PERL -MConfig -e \
+                        'my $r = $Config{vendorlibexp};
+                         $r =~ s/$Config{vendorprefixexp}/\$(prefix)/;
+                         print $r')
+
+fi
+
+
+
+  for ac_prog in pod2man
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_POD2MAN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$POD2MAN"; then
+  ac_cv_prog_POD2MAN="$POD2MAN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_POD2MAN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+POD2MAN=$ac_cv_prog_POD2MAN
+if test -n "$POD2MAN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $POD2MAN" >&5
+$as_echo "$POD2MAN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$POD2MAN" && break
+done
+
+   if test "x$POD2MAN" != "x"; then
+  BUILD_POD_DOC_TRUE=
+  BUILD_POD_DOC_FALSE='#'
+else
+  BUILD_POD_DOC_TRUE='#'
+  BUILD_POD_DOC_FALSE=
+fi
+
+
+
+  # Check whether --enable-coverage was given.
+if test "${enable_coverage+set}" = set; then :
+  enableval=$enable_coverage;
+else
+  enable_coverage=no
+fi
+
+   if test x$enable_coverage = xyes; then
+  COVERAGE_ENABLED_TRUE=
+  COVERAGE_ENABLED_FALSE='#'
+else
+  COVERAGE_ENABLED_TRUE='#'
+  COVERAGE_ENABLED_FALSE=
+fi
+
+
+  if test "x$enable_coverage" = "xyes"; then :
+
+     if test "x$GCC" = "xno"; then :
+
+       as_fn_error $? "not compiling with gcc, which is required for C coverage support" "$LINENO" 5
+
+fi
+
+     for ac_prog in gcov
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_GCOV+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$GCOV"; then
+  ac_cv_prog_GCOV="$GCOV" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_GCOV="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+GCOV=$ac_cv_prog_GCOV
+if test -n "$GCOV"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCOV" >&5
+$as_echo "$GCOV" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$GCOV" && break
+done
+
+     if test -z "$GCOV"; then :
+
+       as_fn_error $? "missing gcov, which is required for C coverage support" "$LINENO" 5
+
+fi
+
+     for ac_prog in lcov
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LCOV+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LCOV"; then
+  ac_cv_prog_LCOV="$LCOV" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_LCOV="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LCOV=$ac_cv_prog_LCOV
+if test -n "$LCOV"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LCOV" >&5
+$as_echo "$LCOV" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$LCOV" && break
+done
+
+     if test -z "$LCOV"; then :
+
+       as_fn_error $? "missing lcov, which is required for C coverage support" "$LINENO" 5
+
+fi
+
+     for ac_prog in genhtml
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LCOV_GENHTML+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LCOV_GENHTML"; then
+  ac_cv_prog_LCOV_GENHTML="$LCOV_GENHTML" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_LCOV_GENHTML="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LCOV_GENHTML=$ac_cv_prog_LCOV_GENHTML
+if test -n "$LCOV_GENHTML"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LCOV_GENHTML" >&5
+$as_echo "$LCOV_GENHTML" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$LCOV_GENHTML" && break
+done
+
+     if test -z "$LCOV_GENHTML"; then :
+
+       as_fn_error $? "missing genhtml, which is required for C coverage support" "$LINENO" 5
+
+fi
+
+     CFLAGS="$CFLAGS --coverage -O0"
+     LDFLAGS="$LDFLAGS --coverage -O0"
+
+     { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Devel::Cover perl module" >&5
+$as_echo_n "checking for Devel::Cover perl module... " >&6; }
+     if $($PERL -e "require Devel::Cover;" 2>/dev/null); then :
+
+       PERL_COVERAGE="-MDevel::Cover"
+
+       { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+
+else
+
+       as_fn_error $? "Devel::Cover perl module is required for coverage support" "$LINENO" 5
+
+fi
+     for ac_prog in cover
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_PERL_COVER+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$PERL_COVER"; then
+  ac_cv_prog_PERL_COVER="$PERL_COVER" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_prog_PERL_COVER="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+PERL_COVER=$ac_cv_prog_PERL_COVER
+if test -n "$PERL_COVER"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL_COVER" >&5
+$as_echo "$PERL_COVER" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$PERL_COVER" && break
+done
+
+     if test -z "$PERL_COVER"; then :
+
+       as_fn_error $? "missing cover, which is required for perl coverage support" "$LINENO" 5
+
+fi
+
+fi
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build with code coverage" >&5
+$as_echo_n "checking whether to build with code coverage... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_coverage" >&5
+$as_echo "$enable_coverage" >&6; }
+
+
+# Checks for operating system services and capabilities.
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then :
+  enableval=$enable_largefile;
+fi
+
+if test "$enable_largefile" != no; then
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
+$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
+if ${ac_cv_sys_largefile_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_sys_largefile_CC=no
+     if test "$GCC" != yes; then
+       ac_save_CC=$CC
+       while :; do
+	 # IRIX 6.2 and later do not support large files by default,
+	 # so use the C compiler's -n32 option if that helps.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+	 if ac_fn_c_try_compile "$LINENO"; then :
+  break
+fi
+rm -f core conftest.err conftest.$ac_objext
+	 CC="$CC -n32"
+	 if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_largefile_CC=' -n32'; break
+fi
+rm -f core conftest.err conftest.$ac_objext
+	 break
+       done
+       CC=$ac_save_CC
+       rm -f conftest.$ac_ext
+    fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
+$as_echo "$ac_cv_sys_largefile_CC" >&6; }
+  if test "$ac_cv_sys_largefile_CC" != no; then
+    CC=$CC$ac_cv_sys_largefile_CC
+  fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
+if ${ac_cv_sys_file_offset_bits+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  while :; do
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_file_offset_bits=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_file_offset_bits=64; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  ac_cv_sys_file_offset_bits=unknown
+  break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
+$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+  no | unknown) ;;
+  *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -rf conftest*
+  if test $ac_cv_sys_file_offset_bits = unknown; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
+$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
+if ${ac_cv_sys_large_files+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  while :; do
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_large_files=no; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+    We can't simply define LARGE_OFF_T to be 9223372036854775807,
+    since some C++ compilers masquerading as C compilers
+    incorrectly reject 9223372036854775807.  */
+#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+  int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+		       && LARGE_OFF_T % 2147483647 == 1)
+		      ? 1 : -1];
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_sys_large_files=1; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  ac_cv_sys_large_files=unknown
+  break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
+$as_echo "$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+  no | unknown) ;;
+  *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -rf conftest*
+  fi
+
+
+fi
+
+
+# Checks for libraries.
+
+
+
+# Check whether --with-libmd was given.
+if test "${with_libmd+set}" = set; then :
+  withval=$with_libmd;
+else
+  with_libmd=check
+fi
+
+  have_libmd="no"
+  if test "x$with_libmd" != "xno"; then :
+
+    for ac_header in md5.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "md5.h" "ac_cv_header_md5_h" "$ac_includes_default"
+if test "x$ac_cv_header_md5_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_MD5_H 1
+_ACEOF
+
+      dpkg_save_libmd_LIBS=$LIBS
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing MD5Init" >&5
+$as_echo_n "checking for library containing MD5Init... " >&6; }
+if ${ac_cv_search_MD5Init+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char MD5Init ();
+int
+main ()
+{
+return MD5Init ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' md; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_MD5Init=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_MD5Init+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_MD5Init+:} false; then :
+
+else
+  ac_cv_search_MD5Init=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_MD5Init" >&5
+$as_echo "$ac_cv_search_MD5Init" >&6; }
+ac_res=$ac_cv_search_MD5Init
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+  have_libmd="yes"
+fi
+
+      LIBS=$dpkg_save_libmd_LIBS
+      if test "x$ac_cv_search_MD5Init" = "xnone required"; then :
+
+        have_libmd="builtin"
+
+elif test "x$ac_cv_search_MD5Init" != "xno"; then :
+
+        have_libmd="yes"
+        MD_LIBS="$ac_cv_search_MD5Init"
+
+fi
+
+fi
+
+done
+
+    if test "x$with_libmd" = "xyes" && test "x$have_libmd" = "xno"; then :
+
+      { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "md5 digest functions not found
+See \`config.log' for more details" "$LINENO" 5; }
+
+fi
+
+fi
+   if test "x$have_libmd" != "xno"; then
+  HAVE_LIBMD_MD5_TRUE=
+  HAVE_LIBMD_MD5_FALSE='#'
+else
+  HAVE_LIBMD_MD5_TRUE='#'
+  HAVE_LIBMD_MD5_FALSE=
+fi
+
+
+
+
+
+
+# Check whether --with-libz was given.
+if test "${with_libz+set}" = set; then :
+  withval=$with_libz;
+else
+  with_libz=check
+fi
+
+  have_libz="no"
+  if test "x$with_libz" != "xno"; then :
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gzdopen in -lz" >&5
+$as_echo_n "checking for gzdopen in -lz... " >&6; }
+if ${ac_cv_lib_z_gzdopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lz  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gzdopen ();
+int
+main ()
+{
+return gzdopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_z_gzdopen=yes
+else
+  ac_cv_lib_z_gzdopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_gzdopen" >&5
+$as_echo "$ac_cv_lib_z_gzdopen" >&6; }
+if test "x$ac_cv_lib_z_gzdopen" = xyes; then :
+
+      ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_zlib_h" = xyes; then :
+
+        have_libz="yes"
+
+fi
+
+
+
+fi
+
+
+    if test "x$with_libz" != "xno"; then :
+
+      if test "x$have_libz" = "xyes"; then :
+
+
+$as_echo "#define WITH_LIBZ 1" >>confdefs.h
+
+        if test "x$with_libz" = "xstatic"; then :
+
+          dpkg_z_libs="-Wl,-Bstatic -lz -Wl,-Bdynamic"
+
+else
+
+          dpkg_z_libs="-lz"
+
+fi
+        Z_LIBS="${Z_LIBS:+$Z_LIBS }$dpkg_z_libs"
+
+else
+
+        if test "x$with_libz" != "xcheck"; then :
+
+          { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "libz library or header not found
+See \`config.log' for more details" "$LINENO" 5; }
+
+fi
+
+fi
+
+fi
+
+fi
+
+
+
+
+
+
+# Check whether --with-libbz2 was given.
+if test "${with_libbz2+set}" = set; then :
+  withval=$with_libbz2;
+else
+  with_libbz2=check
+fi
+
+  have_libbz2="no"
+  if test "x$with_libbz2" != "xno"; then :
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BZ2_bzdopen in -lbz2" >&5
+$as_echo_n "checking for BZ2_bzdopen in -lbz2... " >&6; }
+if ${ac_cv_lib_bz2_BZ2_bzdopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lbz2  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char BZ2_bzdopen ();
+int
+main ()
+{
+return BZ2_bzdopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_bz2_BZ2_bzdopen=yes
+else
+  ac_cv_lib_bz2_BZ2_bzdopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bz2_BZ2_bzdopen" >&5
+$as_echo "$ac_cv_lib_bz2_BZ2_bzdopen" >&6; }
+if test "x$ac_cv_lib_bz2_BZ2_bzdopen" = xyes; then :
+
+      ac_fn_c_check_header_mongrel "$LINENO" "bzlib.h" "ac_cv_header_bzlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_bzlib_h" = xyes; then :
+
+        have_libbz2="yes"
+
+fi
+
+
+
+fi
+
+
+    if test "x$with_libbz2" != "xno"; then :
+
+      if test "x$have_libbz2" = "xyes"; then :
+
+
+$as_echo "#define WITH_LIBBZ2 1" >>confdefs.h
+
+        if test "x$with_libbz2" = "xstatic"; then :
+
+          dpkg_bz2_libs="-Wl,-Bstatic -lbz2 -Wl,-Bdynamic"
+
+else
+
+          dpkg_bz2_libs="-lbz2"
+
+fi
+        BZ2_LIBS="${BZ2_LIBS:+$BZ2_LIBS }$dpkg_bz2_libs"
+
+else
+
+        if test "x$with_libbz2" != "xcheck"; then :
+
+          { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "libbz2 library or header not found
+See \`config.log' for more details" "$LINENO" 5; }
+
+fi
+
+fi
+
+fi
+
+fi
+
+
+
+
+
+
+# Check whether --with-liblzma was given.
+if test "${with_liblzma+set}" = set; then :
+  withval=$with_liblzma;
+else
+  with_liblzma=check
+fi
+
+  have_liblzma="no"
+  if test "x$with_liblzma" != "xno"; then :
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for lzma_alone_decoder in -llzma" >&5
+$as_echo_n "checking for lzma_alone_decoder in -llzma... " >&6; }
+if ${ac_cv_lib_lzma_lzma_alone_decoder+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-llzma  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char lzma_alone_decoder ();
+int
+main ()
+{
+return lzma_alone_decoder ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_lzma_lzma_alone_decoder=yes
+else
+  ac_cv_lib_lzma_lzma_alone_decoder=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lzma_lzma_alone_decoder" >&5
+$as_echo "$ac_cv_lib_lzma_lzma_alone_decoder" >&6; }
+if test "x$ac_cv_lib_lzma_lzma_alone_decoder" = xyes; then :
+
+      ac_fn_c_check_header_mongrel "$LINENO" "lzma.h" "ac_cv_header_lzma_h" "$ac_includes_default"
+if test "x$ac_cv_header_lzma_h" = xyes; then :
+
+        have_liblzma="yes"
+
+fi
+
+
+
+fi
+
+
+    if test "x$with_liblzma" != "xno"; then :
+
+      if test "x$have_liblzma" = "xyes"; then :
+
+
+$as_echo "#define WITH_LIBLZMA 1" >>confdefs.h
+
+        if test "x$with_liblzma" = "xstatic"; then :
+
+          dpkg_lzma_libs="-Wl,-Bstatic -llzma -Wl,-Bdynamic"
+
+else
+
+          dpkg_lzma_libs="-llzma"
+
+fi
+        LZMA_LIBS="${LZMA_LIBS:+$LZMA_LIBS }$dpkg_lzma_libs"
+
+else
+
+        if test "x$with_liblzma" != "xcheck"; then :
+
+          { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "liblzma library or header not found
+See \`config.log' for more details" "$LINENO" 5; }
+
+fi
+
+fi
+
+fi
+
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for lzma_stream_encoder_mt in -llzma" >&5
+$as_echo_n "checking for lzma_stream_encoder_mt in -llzma... " >&6; }
+if ${ac_cv_lib_lzma_lzma_stream_encoder_mt+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-llzma  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char lzma_stream_encoder_mt ();
+int
+main ()
+{
+return lzma_stream_encoder_mt ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_lzma_lzma_stream_encoder_mt=yes
+else
+  ac_cv_lib_lzma_lzma_stream_encoder_mt=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lzma_lzma_stream_encoder_mt" >&5
+$as_echo "$ac_cv_lib_lzma_lzma_stream_encoder_mt" >&6; }
+if test "x$ac_cv_lib_lzma_lzma_stream_encoder_mt" = xyes; then :
+
+
+$as_echo "#define HAVE_LZMA_MT 1" >>confdefs.h
+
+
+fi
+
+
+
+
+
+
+
+
+
+if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then
+	if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
+set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_PKG_CONFIG+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+PKG_CONFIG=$ac_cv_path_PKG_CONFIG
+if test -n "$PKG_CONFIG"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5
+$as_echo "$PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_path_PKG_CONFIG"; then
+  ac_pt_PKG_CONFIG=$PKG_CONFIG
+  # Extract the first word of "pkg-config", so it can be a program name with args.
+set dummy pkg-config; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_ac_pt_PKG_CONFIG+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $ac_pt_PKG_CONFIG in
+  [\\/]* | ?:[\\/]*)
+  ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path.
+  ;;
+  *)
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+    ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+  ;;
+esac
+fi
+ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
+if test -n "$ac_pt_PKG_CONFIG"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5
+$as_echo "$ac_pt_PKG_CONFIG" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_pt_PKG_CONFIG" = x; then
+    PKG_CONFIG=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    PKG_CONFIG=$ac_pt_PKG_CONFIG
+  fi
+else
+  PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
+fi
+
+fi
+if test -n "$PKG_CONFIG"; then
+	_pkg_min_version=0.9.0
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
+$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
+	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+	else
+		{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+		PKG_CONFIG=""
+	fi
+fi
+
+
+
+
+# Check whether --with-libselinux was given.
+if test "${with_libselinux+set}" = set; then :
+  withval=$with_libselinux;
+else
+  with_libselinux=check
+fi
+
+  SELINUX_MIN_VERSION=2.0.99
+  have_libselinux="no"
+  if test "x$with_libselinux" != "xno"; then :
+
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libselinux >= $SELINUX_MIN_VERSION" >&5
+$as_echo_n "checking for libselinux >= $SELINUX_MIN_VERSION... " >&6; }
+
+if test -n "$SELINUX_CFLAGS"; then
+    pkg_cv_SELINUX_CFLAGS="$SELINUX_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libselinux >= \$SELINUX_MIN_VERSION\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libselinux >= $SELINUX_MIN_VERSION") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_SELINUX_CFLAGS=`$PKG_CONFIG --cflags "libselinux >= $SELINUX_MIN_VERSION" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+if test -n "$SELINUX_LIBS"; then
+    pkg_cv_SELINUX_LIBS="$SELINUX_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+    if test -n "$PKG_CONFIG" && \
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libselinux >= \$SELINUX_MIN_VERSION\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libselinux >= $SELINUX_MIN_VERSION") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  pkg_cv_SELINUX_LIBS=`$PKG_CONFIG --libs "libselinux >= $SELINUX_MIN_VERSION" 2>/dev/null`
+		      test "x$?" != "x0" && pkg_failed=yes
+else
+  pkg_failed=yes
+fi
+ else
+    pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+        _pkg_short_errors_supported=yes
+else
+        _pkg_short_errors_supported=no
+fi
+        if test $_pkg_short_errors_supported = yes; then
+	        SELINUX_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libselinux >= $SELINUX_MIN_VERSION" 2>&1`
+        else
+	        SELINUX_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libselinux >= $SELINUX_MIN_VERSION" 2>&1`
+        fi
+	# Put the nasty error message in config.log where it belongs
+	echo "$SELINUX_PKG_ERRORS" >&5
+
+
+      if test "x$with_libselinux" != "xcheck"; then :
+
+        { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "libselinux at least $SELINUX_MIN_VERSION not found
+See \`config.log' for more details" "$LINENO" 5; }
+
+fi
+
+elif test $pkg_failed = untried; then
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+      if test "x$with_libselinux" != "xcheck"; then :
+
+        { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "libselinux at least $SELINUX_MIN_VERSION not found
+See \`config.log' for more details" "$LINENO" 5; }
+
+fi
+
+else
+	SELINUX_CFLAGS=$pkg_cv_SELINUX_CFLAGS
+	SELINUX_LIBS=$pkg_cv_SELINUX_LIBS
+        { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+      ac_fn_c_check_header_mongrel "$LINENO" "selinux/selinux.h" "ac_cv_header_selinux_selinux_h" "$ac_includes_default"
+if test "x$ac_cv_header_selinux_selinux_h" = xyes; then :
+
+
+$as_echo "#define WITH_LIBSELINUX 1" >>confdefs.h
+
+        have_libselinux="yes"
+
+else
+
+        if test "x$with_libselinux" != "xcheck"; then :
+
+          { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "libselinux header not found
+See \`config.log' for more details" "$LINENO" 5; }
+
+fi
+
+fi
+
+
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for setexecfilecon in -lselinux" >&5
+$as_echo_n "checking for setexecfilecon in -lselinux... " >&6; }
+if ${ac_cv_lib_selinux_setexecfilecon+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lselinux  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char setexecfilecon ();
+int
+main ()
+{
+return setexecfilecon ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_selinux_setexecfilecon=yes
+else
+  ac_cv_lib_selinux_setexecfilecon=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_selinux_setexecfilecon" >&5
+$as_echo "$ac_cv_lib_selinux_setexecfilecon" >&6; }
+if test "x$ac_cv_lib_selinux_setexecfilecon" = xyes; then :
+
+
+$as_echo "#define HAVE_SETEXECFILECON 1" >>confdefs.h
+
+
+fi
+
+
+fi
+
+fi
+   if test "x$have_libselinux" = "xyes"; then
+  WITH_LIBSELINUX_TRUE=
+  WITH_LIBSELINUX_FALSE='#'
+else
+  WITH_LIBSELINUX_TRUE='#'
+  WITH_LIBSELINUX_FALSE=
+fi
+
+   if test "x$ac_cv_lib_selinux_setexecfilecon" = "xyes"; then
+  HAVE_SETEXECFILECON_TRUE=
+  HAVE_SETEXECFILECON_FALSE='#'
+else
+  HAVE_SETEXECFILECON_TRUE='#'
+  HAVE_SETEXECFILECON_FALSE=
+fi
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether Unicode is requested" >&5
+$as_echo_n "checking whether Unicode is requested... " >&6; }
+    # Check whether --enable-unicode was given.
+if test "${enable_unicode+set}" = set; then :
+  enableval=$enable_unicode; USE_UNICODE=$enableval
+else
+  USE_UNICODE=yes
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_UNICODE" >&5
+$as_echo "$USE_UNICODE" >&6; }
+
+
+if test "x$build_dselect" = "xyes"; then :
+
+
+
+    for ac_header in ncurses/ncurses.h ncurses.h curses.h ncurses/term.h term.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+ have_curses_header=yes
+fi
+
+done
+
+  if test "x$USE_UNICODE" = "xyes"; then :
+
+    for ac_header in ncursesw/ncurses.h ncursesw/term.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+ have_curses_header=yes
+fi
+
+done
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncursesw" >&5
+$as_echo_n "checking for initscr in -lncursesw... " >&6; }
+if ${ac_cv_lib_ncursesw_initscr+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncursesw  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char initscr ();
+int
+main ()
+{
+return initscr ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_ncursesw_initscr=yes
+else
+  ac_cv_lib_ncursesw_initscr=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncursesw_initscr" >&5
+$as_echo "$ac_cv_lib_ncursesw_initscr" >&6; }
+if test "x$ac_cv_lib_ncursesw_initscr" = xyes; then :
+
+      CURSES_LIBS="${CURSES_LIBS:+$CURSES_LIBS }-lncursesw"
+
+else
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncurses" >&5
+$as_echo_n "checking for initscr in -lncurses... " >&6; }
+if ${ac_cv_lib_ncurses_initscr+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncurses  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char initscr ();
+int
+main ()
+{
+return initscr ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_ncurses_initscr=yes
+else
+  ac_cv_lib_ncurses_initscr=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_initscr" >&5
+$as_echo "$ac_cv_lib_ncurses_initscr" >&6; }
+if test "x$ac_cv_lib_ncurses_initscr" = xyes; then :
+
+    CURSES_LIBS="${CURSES_LIBS:+$CURSES_LIBS }-lncurses"
+
+else
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lcurses" >&5
+$as_echo_n "checking for initscr in -lcurses... " >&6; }
+if ${ac_cv_lib_curses_initscr+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lcurses  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char initscr ();
+int
+main ()
+{
+return initscr ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_curses_initscr=yes
+else
+  ac_cv_lib_curses_initscr=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_curses_initscr" >&5
+$as_echo "$ac_cv_lib_curses_initscr" >&6; }
+if test "x$ac_cv_lib_curses_initscr" = xyes; then :
+
+      CURSES_LIBS="${CURSES_LIBS:+$CURSES_LIBS }-lcurses"
+
+else
+
+      as_fn_error $? "no curses library found" "$LINENO" 5
+
+fi
+
+
+fi
+
+
+
+fi
+
+
+else
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lncurses" >&5
+$as_echo_n "checking for initscr in -lncurses... " >&6; }
+if ${ac_cv_lib_ncurses_initscr+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lncurses  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char initscr ();
+int
+main ()
+{
+return initscr ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_ncurses_initscr=yes
+else
+  ac_cv_lib_ncurses_initscr=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_initscr" >&5
+$as_echo "$ac_cv_lib_ncurses_initscr" >&6; }
+if test "x$ac_cv_lib_ncurses_initscr" = xyes; then :
+
+    CURSES_LIBS="${CURSES_LIBS:+$CURSES_LIBS }-lncurses"
+
+else
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for initscr in -lcurses" >&5
+$as_echo_n "checking for initscr in -lcurses... " >&6; }
+if ${ac_cv_lib_curses_initscr+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lcurses  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char initscr ();
+int
+main ()
+{
+return initscr ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_curses_initscr=yes
+else
+  ac_cv_lib_curses_initscr=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_curses_initscr" >&5
+$as_echo "$ac_cv_lib_curses_initscr" >&6; }
+if test "x$ac_cv_lib_curses_initscr" = xyes; then :
+
+      CURSES_LIBS="${CURSES_LIBS:+$CURSES_LIBS }-lcurses"
+
+else
+
+      as_fn_error $? "no curses library found" "$LINENO" 5
+
+fi
+
+
+fi
+
+
+
+fi
+  if test "x$have_curses_header" != "xyes"; then :
+
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "curses header not found
+See \`config.log' for more details" "$LINENO" 5; }
+
+fi
+  have_libcurses=yes
+
+
+fi
+if test "x$build_start_stop_daemon" = "xyes"; then :
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for proc_stat_list_create in -lps" >&5
+$as_echo_n "checking for proc_stat_list_create in -lps... " >&6; }
+if ${ac_cv_lib_ps_proc_stat_list_create+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lps  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char proc_stat_list_create ();
+int
+main ()
+{
+return proc_stat_list_create ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_ps_proc_stat_list_create=yes
+else
+  ac_cv_lib_ps_proc_stat_list_create=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ps_proc_stat_list_create" >&5
+$as_echo "$ac_cv_lib_ps_proc_stat_list_create" >&6; }
+if test "x$ac_cv_lib_ps_proc_stat_list_create" = xyes; then :
+
+    PS_LIBS="-lps"
+    have_libps=yes
+
+fi
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for kvm_openfiles in -lkvm" >&5
+$as_echo_n "checking for kvm_openfiles in -lkvm... " >&6; }
+if ${ac_cv_lib_kvm_kvm_openfiles+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lkvm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char kvm_openfiles ();
+int
+main ()
+{
+return kvm_openfiles ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_kvm_kvm_openfiles=yes
+else
+  ac_cv_lib_kvm_kvm_openfiles=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_kvm_kvm_openfiles" >&5
+$as_echo "$ac_cv_lib_kvm_kvm_openfiles" >&6; }
+if test "x$ac_cv_lib_kvm_kvm_openfiles" = xyes; then :
+
+    KVM_LIBS="-lkvm"
+    have_libkvm=yes
+
+fi
+
+
+
+fi
+
+# Checks for header files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+for ac_header in \
+  stddef.h \
+  error.h \
+  err.h \
+  locale.h \
+  xlocale.h \
+  libintl.h \
+  kvm.h \
+  sys/sysmacros.h \
+  sys/param.h \
+  sys/syscall.h \
+  sys/user.h \
+  sys/procfs.h \
+  sys/pstat.h \
+  linux/fiemap.h \
+
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+case $host_os in #(
+  linux-gnu*) :
+
+    # The glibc project has deprecated the <sys/sysctl.h> header and emits
+    # warnings on its usage, and removed it in 2.32. The Linux kernel removed
+    # support for it in 5.5.
+   ;; #(
+  *) :
+
+    # On other systems, we need to check whether to use it.
+    for ac_header in \
+      sys/sysctl.h \
+
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+ ;;
+esac
+for ac_header in sys/proc.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "sys/proc.h" "ac_cv_header_sys_proc_h" "
+#ifdef HAVE_SYS_PARAM_H
+#include <sys/param.h>
+#endif
+
+"
+if test "x$ac_cv_header_sys_proc_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_SYS_PROC_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+if test "x$build_dselect" = "xyes"; then :
+
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+  for ac_header in cxxabi.h
+do :
+  ac_fn_cxx_check_header_mongrel "$LINENO" "cxxabi.h" "ac_cv_header_cxxabi_h" "$ac_includes_default"
+if test "x$ac_cv_header_cxxabi_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_CXXABI_H 1
+_ACEOF
+
+fi
+
+done
+
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+fi
+
+# Checks for typedefs, structures, and compiler characteristics.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
+$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
+if ${ac_cv_c_bigendian+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_c_bigendian=unknown
+    # See if we're dealing with a universal compiler.
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifndef __APPLE_CC__
+	       not a universal capable compiler
+	     #endif
+	     typedef int dummy;
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+	# Check for potential -arch flags.  It is not universal unless
+	# there are at least two -arch flags with different values.
+	ac_arch=
+	ac_prev=
+	for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
+	 if test -n "$ac_prev"; then
+	   case $ac_word in
+	     i?86 | x86_64 | ppc | ppc64)
+	       if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
+		 ac_arch=$ac_word
+	       else
+		 ac_cv_c_bigendian=universal
+		 break
+	       fi
+	       ;;
+	   esac
+	   ac_prev=
+	 elif test "x$ac_word" = "x-arch"; then
+	   ac_prev=arch
+	 fi
+       done
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    if test $ac_cv_c_bigendian = unknown; then
+      # See if sys/param.h defines the BYTE_ORDER macro.
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+	     #include <sys/param.h>
+
+int
+main ()
+{
+#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \
+		     && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \
+		     && LITTLE_ENDIAN)
+	      bogus endian macros
+	     #endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  # It does; now see whether it defined to BIG_ENDIAN or not.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <sys/types.h>
+		#include <sys/param.h>
+
+int
+main ()
+{
+#if BYTE_ORDER != BIG_ENDIAN
+		 not big endian
+		#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_bigendian=yes
+else
+  ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    fi
+    if test $ac_cv_c_bigendian = unknown; then
+      # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <limits.h>
+
+int
+main ()
+{
+#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN)
+	      bogus endian macros
+	     #endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  # It does; now see whether it defined to _BIG_ENDIAN or not.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <limits.h>
+
+int
+main ()
+{
+#ifndef _BIG_ENDIAN
+		 not big endian
+		#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_bigendian=yes
+else
+  ac_cv_c_bigendian=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    fi
+    if test $ac_cv_c_bigendian = unknown; then
+      # Compile a test program.
+      if test "$cross_compiling" = yes; then :
+  # Try to guess by grepping values from an object file.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+short int ascii_mm[] =
+		  { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
+		short int ascii_ii[] =
+		  { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
+		int use_ascii (int i) {
+		  return ascii_mm[i] + ascii_ii[i];
+		}
+		short int ebcdic_ii[] =
+		  { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
+		short int ebcdic_mm[] =
+		  { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
+		int use_ebcdic (int i) {
+		  return ebcdic_mm[i] + ebcdic_ii[i];
+		}
+		extern int foo;
+
+int
+main ()
+{
+return use_ascii (foo) == use_ebcdic (foo);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
+	      ac_cv_c_bigendian=yes
+	    fi
+	    if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
+	      if test "$ac_cv_c_bigendian" = unknown; then
+		ac_cv_c_bigendian=no
+	      else
+		# finding both strings is unlikely to happen, but who knows?
+		ac_cv_c_bigendian=unknown
+	      fi
+	    fi
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+
+	     /* Are we little or big endian?  From Harbison&Steele.  */
+	     union
+	     {
+	       long int l;
+	       char c[sizeof (long int)];
+	     } u;
+	     u.l = 1;
+	     return u.c[sizeof (long int) - 1] == 1;
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_c_bigendian=no
+else
+  ac_cv_c_bigendian=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+    fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
+$as_echo "$ac_cv_c_bigendian" >&6; }
+ case $ac_cv_c_bigendian in #(
+   yes)
+     $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h
+;; #(
+   no)
+      ;; #(
+   universal)
+
+$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
+
+     ;; #(
+   *)
+     as_fn_error $? "unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
+ esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if ${ac_cv_c_const+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+#ifndef __cplusplus
+  /* Ultrix mips cc rejects this sort of thing.  */
+  typedef int charset[2];
+  const charset cs = { 0, 0 };
+  /* SunOS 4.1.1 cc rejects this.  */
+  char const *const *pcpcc;
+  char **ppc;
+  /* NEC SVR4.0.2 mips cc rejects this.  */
+  struct point {int x, y;};
+  static struct point const zero = {0,0};
+  /* AIX XL C 1.02.0.0 rejects this.
+     It does not let you subtract one const X* pointer from another in
+     an arm of an if-expression whose if-part is not a constant
+     expression */
+  const char *g = "string";
+  pcpcc = &g + (g ? g-g : 0);
+  /* HPUX 7.0 cc rejects these. */
+  ++pcpcc;
+  ppc = (char**) pcpcc;
+  pcpcc = (char const *const *) ppc;
+  { /* SCO 3.2v4 cc rejects this sort of thing.  */
+    char tx;
+    char *t = &tx;
+    char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+    *t++ = 0;
+    if (s) return 0;
+  }
+  { /* Someone thinks the Sun supposedly-ANSI compiler will reject this.  */
+    int x[] = {25, 17};
+    const int *foo = &x[0];
+    ++foo;
+  }
+  { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+    typedef const int *iptr;
+    iptr p = 0;
+    ++p;
+  }
+  { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
+       "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+    struct s { int j; const int *ap[3]; } bx;
+    struct s *b = &bx; b->j = 5;
+  }
+  { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+    const int foo = 10;
+    if (!foo) return 0;
+  }
+  return !cs[0] && !zero.x;
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_const=yes
+else
+  ac_cv_c_const=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+$as_echo "#define const /**/" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
+$as_echo_n "checking for inline... " >&6; }
+if ${ac_cv_c_inline+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_c_inline=no
+for ac_kw in inline __inline__ __inline; do
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifndef __cplusplus
+typedef int foo_t;
+static $ac_kw foo_t static_foo () {return 0; }
+$ac_kw foo_t foo () {return 0; }
+#endif
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_inline=$ac_kw
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  test "$ac_cv_c_inline" != no && break
+done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
+$as_echo "$ac_cv_c_inline" >&6; }
+
+case $ac_cv_c_inline in
+  inline | yes) ;;
+  *)
+    case $ac_cv_c_inline in
+      no) ac_val=;;
+      *) ac_val=$ac_cv_c_inline;;
+    esac
+    cat >>confdefs.h <<_ACEOF
+#ifndef __cplusplus
+#define inline $ac_val
+#endif
+_ACEOF
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working volatile" >&5
+$as_echo_n "checking for working volatile... " >&6; }
+if ${ac_cv_c_volatile+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+volatile int x;
+int * volatile y = (int *) 0;
+return !x && !y;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_volatile=yes
+else
+  ac_cv_c_volatile=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_volatile" >&5
+$as_echo "$ac_cv_c_volatile" >&6; }
+if test $ac_cv_c_volatile = no; then
+
+$as_echo "#define volatile /**/" >>confdefs.h
+
+fi
+
+ac_fn_c_check_type "$LINENO" "mode_t" "ac_cv_type_mode_t" "$ac_includes_default"
+if test "x$ac_cv_type_mode_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define mode_t int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "pid_t" "ac_cv_type_pid_t" "$ac_includes_default"
+if test "x$ac_cv_type_pid_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define pid_t int
+_ACEOF
+
+fi
+
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
+
+  ac_fn_c_check_type "$LINENO" "ptrdiff_t" "ac_cv_type_ptrdiff_t" "$ac_includes_default"
+if test "x$ac_cv_type_ptrdiff_t" = xyes; then :
+
+else
+
+
+cat >>confdefs.h <<_ACEOF
+#define ptrdiff_t int
+_ACEOF
+
+
+fi
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of unsigned int" >&5
+$as_echo_n "checking size of unsigned int... " >&6; }
+if ${ac_cv_sizeof_unsigned_int+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (unsigned int))" "ac_cv_sizeof_unsigned_int"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_unsigned_int" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (unsigned int)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_unsigned_int=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_unsigned_int" >&5
+$as_echo "$ac_cv_sizeof_unsigned_int" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_UNSIGNED_INT $ac_cv_sizeof_unsigned_int
+_ACEOF
+
+
+# The cast to long int works around a bug in the HP C Compiler
+# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
+# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
+# This bug is HP SR number 8606223364.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of unsigned long" >&5
+$as_echo_n "checking size of unsigned long... " >&6; }
+if ${ac_cv_sizeof_unsigned_long+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (unsigned long))" "ac_cv_sizeof_unsigned_long"        "$ac_includes_default"; then :
+
+else
+  if test "$ac_cv_type_unsigned_long" = yes; then
+     { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "cannot compute sizeof (unsigned long)
+See \`config.log' for more details" "$LINENO" 5; }
+   else
+     ac_cv_sizeof_unsigned_long=0
+   fi
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_unsigned_long" >&5
+$as_echo "$ac_cv_sizeof_unsigned_long" >&6; }
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long
+_ACEOF
+
+
+
+  for ac_header in unistd.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "unistd.h" "ac_cv_header_unistd_h" "$ac_includes_default"
+if test "x$ac_cv_header_unistd_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_UNISTD_H 1
+_ACEOF
+
+fi
+
+done
+
+  ac_fn_c_check_decl "$LINENO" "sys_siglist" "ac_cv_have_decl_sys_siglist" "
+#include <signal.h>
+/* NetBSD declares sys_siglist in unistd.h.  */
+#if HAVE_UNISTD_H
+#  include <unistd.h>
+#endif
+
+"
+if test "x$ac_cv_have_decl_sys_siglist" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_SYS_SIGLIST $ac_have_decl
+_ACEOF
+
+
+
+  ac_fn_c_check_decl "$LINENO" "sys_errlist" "ac_cv_have_decl_sys_errlist" "
+#include <errno.h>
+/* glibc declares sys_errlist in stdio.h.  */
+#include <stdio.h>
+
+"
+if test "x$ac_cv_have_decl_sys_errlist" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_SYS_ERRLIST $ac_have_decl
+_ACEOF
+ac_fn_c_check_decl "$LINENO" "sys_nerr" "ac_cv_have_decl_sys_nerr" "
+#include <errno.h>
+/* glibc declares sys_errlist in stdio.h.  */
+#include <stdio.h>
+
+"
+if test "x$ac_cv_have_decl_sys_nerr" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_SYS_NERR $ac_have_decl
+_ACEOF
+
+   if test "x$ac_cv_have_decl_sys_errlist" = "xyes" && \
+     test "x$ac_cv_have_decl_sys_nerr" = "xyes"; then
+  HAVE_SYS_ERRLIST_TRUE=
+  HAVE_SYS_ERRLIST_FALSE='#'
+else
+  HAVE_SYS_ERRLIST_TRUE='#'
+  HAVE_SYS_ERRLIST_FALSE=
+fi
+
+
+
+# Checks for library functions.
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for va_copy" >&5
+$as_echo_n "checking for va_copy... " >&6; }
+if ${dpkg_cv_va_copy+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+#include <stdarg.h>
+
+int
+main ()
+{
+
+va_list v1, v2;
+va_copy(v1, v2);
+
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_va_copy=yes
+
+else
+
+      dpkg_cv_va_copy=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_va_copy" >&5
+$as_echo "$dpkg_cv_va_copy" >&6; }
+  if test "x$dpkg_cv_va_copy" = "xyes"; then :
+
+
+$as_echo "#define HAVE_VA_COPY 1" >>confdefs.h
+
+
+fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for C99 snprintf functions" >&5
+$as_echo_n "checking for C99 snprintf functions... " >&6; }
+if ${dpkg_cv_c99_snprintf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    if test "$cross_compiling" = yes; then :
+
+      dpkg_cv_c99_snprintf=maybe
+
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+#include <stdarg.h>
+#include <stdio.h>
+#include <string.h>
+int test_vsnprintf(const char *fmt, ...)
+{
+	int n;
+	va_list args;
+
+	va_start(args, fmt);
+	n = vsnprintf(NULL, 0, fmt, args);
+	va_end(args);
+
+	return n;
+}
+int main()
+{
+	int n;
+
+	n = snprintf(NULL, 0, "format %s %d", "string", 10);
+	if (n != strlen("format string 10"))
+		return 1;
+
+	n = test_vsnprintf("format %s %d", "string", 10);
+	if (n != strlen("format string 10"))
+		return 1;
+
+	return 0;
+}
+
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+      dpkg_cv_c99_snprintf=yes
+
+else
+
+      dpkg_cv_c99_snprintf=no
+
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+
+    if test "x$dpkg_cv_c99_snprintf" = "xmaybe"; then :
+
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+#define _GNU_SOURCE 1
+#include <unistd.h>
+#if !defined(_XOPEN_VERSION) || _XOPEN_VERSION < 600
+#error "snprintf() has conflicting semantics with C99 on SUSv2 and earlier"
+#endif
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+        dpkg_cv_c99_snprintf=yes
+
+else
+
+        dpkg_cv_c99_snprintf=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_c99_snprintf" >&5
+$as_echo "$dpkg_cv_c99_snprintf" >&6; }
+  if test "x$dpkg_cv_c99_snprintf" = "xyes"; then :
+
+
+$as_echo "#define HAVE_C99_SNPRINTF 1" >>confdefs.h
+
+
+fi
+   if test "x$dpkg_cv_c99_snprintf" = "xyes"; then
+  HAVE_C99_SNPRINTF_TRUE=
+  HAVE_C99_SNPRINTF_FALSE='#'
+else
+  HAVE_C99_SNPRINTF_TRUE='#'
+  HAVE_C99_SNPRINTF_FALSE=
+fi
+
+
+
+  ac_fn_c_check_decl "$LINENO" "offsetof" "ac_cv_have_decl_offsetof" "#include <stddef.h>
+"
+if test "x$ac_cv_have_decl_offsetof" = xyes; then :
+
+
+$as_echo "#define HAVE_OFFSETOF 1" >>confdefs.h
+
+
+fi
+
+
+
+  ac_fn_c_check_decl "$LINENO" "makedev" "ac_cv_have_decl_makedev" "#include <sys/types.h>
+"
+if test "x$ac_cv_have_decl_makedev" = xyes; then :
+
+
+$as_echo "#define HAVE_MAKEDEV 1" >>confdefs.h
+
+
+fi
+
+
+
+  ac_fn_c_check_decl "$LINENO" "WCOREDUMP" "ac_cv_have_decl_WCOREDUMP" "#include <sys/wait.h>
+"
+if test "x$ac_cv_have_decl_WCOREDUMP" = xyes; then :
+
+
+$as_echo "#define HAVE_WCOREDUMP 1" >>confdefs.h
+
+
+fi
+
+
+
+  ac_fn_c_check_decl "$LINENO" "TIOCNOTTY" "ac_cv_have_decl_TIOCNOTTY" "#include <sys/ioctl.h>
+"
+if test "x$ac_cv_have_decl_TIOCNOTTY" = xyes; then :
+
+
+$as_echo "#define HAVE_TIOCNOTTY 1" >>confdefs.h
+
+
+fi
+
+
+
+  ac_fn_c_check_decl "$LINENO" "O_NOFOLLOW" "ac_cv_have_decl_O_NOFOLLOW" "#include <fcntl.h>
+"
+if test "x$ac_cv_have_decl_O_NOFOLLOW" = xyes; then :
+
+
+$as_echo "#define HAVE_O_NOFOLLOW 1" >>confdefs.h
+
+
+fi
+
+
+
+  ac_fn_c_check_decl "$LINENO" "F_ALLOCSP64" "ac_cv_have_decl_F_ALLOCSP64" "#include <fcntl.h>
+"
+if test "x$ac_cv_have_decl_F_ALLOCSP64" = xyes; then :
+
+
+$as_echo "#define HAVE_F_ALLOCSP64 1" >>confdefs.h
+
+
+fi
+
+
+
+  ac_fn_c_check_decl "$LINENO" "F_PREALLOCATE" "ac_cv_have_decl_F_PREALLOCATE" "#include <fcntl.h>
+"
+if test "x$ac_cv_have_decl_F_PREALLOCATE" = xyes; then :
+
+
+$as_echo "#define HAVE_F_PREALLOCATE 1" >>confdefs.h
+
+
+fi
+
+
+
+  ac_fn_c_check_decl "$LINENO" "P_tmpdir" "ac_cv_have_decl_P_tmpdir" "#include <stdio.h>
+"
+if test "x$ac_cv_have_decl_P_tmpdir" = xyes; then :
+
+
+$as_echo "#define HAVE_P_TMPDIR 1" >>confdefs.h
+
+
+fi
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for program_invocation_short_name" >&5
+$as_echo_n "checking for program_invocation_short_name... " >&6; }
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+    #include <errno.h>
+int
+main ()
+{
+const char *p = program_invocation_short_name;
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+
+$as_echo "#define HAVE_PROGRAM_INVOCATION_SHORT_NAME 1" >>confdefs.h
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+else
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for __progname" >&5
+$as_echo_n "checking for __progname... " >&6; }
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+    extern char *__progname;
+int
+main ()
+{
+printf("%s", __progname);
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+
+$as_echo "#define HAVE___PROGNAME 1" >>confdefs.h
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+else
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+
+  for ac_func in \
+  getopt \
+  getopt_long \
+  obstack_free \
+  strchrnul \
+  strnlen \
+  strndup \
+  strerror \
+  strsignal \
+  asprintf \
+  scandir \
+  alphasort \
+  unsetenv \
+
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+     if test "x$ac_cv_func_getopt" = "xyes"; then
+  HAVE_GETOPT_TRUE=
+  HAVE_GETOPT_FALSE='#'
+else
+  HAVE_GETOPT_TRUE='#'
+  HAVE_GETOPT_FALSE=
+fi
+
+
+     if test "x$ac_cv_func_getopt_long" = "xyes"; then
+  HAVE_GETOPT_LONG_TRUE=
+  HAVE_GETOPT_LONG_FALSE='#'
+else
+  HAVE_GETOPT_LONG_TRUE='#'
+  HAVE_GETOPT_LONG_FALSE=
+fi
+
+
+     if test "x$ac_cv_func_obstack_free" = "xyes"; then
+  HAVE_OBSTACK_FREE_TRUE=
+  HAVE_OBSTACK_FREE_FALSE='#'
+else
+  HAVE_OBSTACK_FREE_TRUE='#'
+  HAVE_OBSTACK_FREE_FALSE=
+fi
+
+
+     if test "x$ac_cv_func_strchrnul" = "xyes"; then
+  HAVE_STRCHRNUL_TRUE=
+  HAVE_STRCHRNUL_FALSE='#'
+else
+  HAVE_STRCHRNUL_TRUE='#'
+  HAVE_STRCHRNUL_FALSE=
+fi
+
+
+     if test "x$ac_cv_func_strnlen" = "xyes"; then
+  HAVE_STRNLEN_TRUE=
+  HAVE_STRNLEN_FALSE='#'
+else
+  HAVE_STRNLEN_TRUE='#'
+  HAVE_STRNLEN_FALSE=
+fi
+
+
+     if test "x$ac_cv_func_strndup" = "xyes"; then
+  HAVE_STRNDUP_TRUE=
+  HAVE_STRNDUP_FALSE='#'
+else
+  HAVE_STRNDUP_TRUE='#'
+  HAVE_STRNDUP_FALSE=
+fi
+
+
+     if test "x$ac_cv_func_strerror" = "xyes"; then
+  HAVE_STRERROR_TRUE=
+  HAVE_STRERROR_FALSE='#'
+else
+  HAVE_STRERROR_TRUE='#'
+  HAVE_STRERROR_FALSE=
+fi
+
+
+     if test "x$ac_cv_func_strsignal" = "xyes"; then
+  HAVE_STRSIGNAL_TRUE=
+  HAVE_STRSIGNAL_FALSE='#'
+else
+  HAVE_STRSIGNAL_TRUE='#'
+  HAVE_STRSIGNAL_FALSE=
+fi
+
+
+     if test "x$ac_cv_func_asprintf" = "xyes"; then
+  HAVE_ASPRINTF_TRUE=
+  HAVE_ASPRINTF_FALSE='#'
+else
+  HAVE_ASPRINTF_TRUE='#'
+  HAVE_ASPRINTF_FALSE=
+fi
+
+
+     if test "x$ac_cv_func_scandir" = "xyes"; then
+  HAVE_SCANDIR_TRUE=
+  HAVE_SCANDIR_FALSE='#'
+else
+  HAVE_SCANDIR_TRUE='#'
+  HAVE_SCANDIR_FALSE=
+fi
+
+
+     if test "x$ac_cv_func_alphasort" = "xyes"; then
+  HAVE_ALPHASORT_TRUE=
+  HAVE_ALPHASORT_FALSE='#'
+else
+  HAVE_ALPHASORT_TRUE='#'
+  HAVE_ALPHASORT_FALSE=
+fi
+
+
+     if test "x$ac_cv_func_unsetenv" = "xyes"; then
+  HAVE_UNSETENV_TRUE=
+  HAVE_UNSETENV_FALSE='#'
+else
+  HAVE_UNSETENV_TRUE='#'
+  HAVE_UNSETENV_FALSE=
+fi
+
+
+
+for ac_func in memcpy lchown
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+  as_fn_error $? "missing required function" "$LINENO" 5
+fi
+done
+
+for ac_func in \
+  strtoimax \
+  isascii \
+  setsid \
+  getdtablesize \
+  getprogname \
+  getexecname \
+  lutimes \
+  fallocate \
+  posix_fallocate \
+  posix_fadvise \
+  uselocale \
+
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+if test "x$build_dselect" = "xyes"; then :
+
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+  for ac_func in __cxa_pure_virtual
+do :
+  ac_fn_cxx_check_func "$LINENO" "__cxa_pure_virtual" "ac_cv_func___cxa_pure_virtual"
+if test "x$ac_cv_func___cxa_pure_virtual" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE___CXA_PURE_VIRTUAL 1
+_ACEOF
+
+fi
+done
+
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+fi
+
+
+  # Check whether --enable-mmap was given.
+if test "${enable_mmap+set}" = set; then :
+  enableval=$enable_mmap;
+else
+  enable_mmap=no
+fi
+
+
+  if test "x$enable_mmap" = "xyes"; then :
+
+    for ac_func in mmap
+do :
+  ac_fn_c_check_func "$LINENO" "mmap" "ac_cv_func_mmap"
+if test "x$ac_cv_func_mmap" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_MMAP 1
+_ACEOF
+
+fi
+done
+
+
+$as_echo "#define USE_MMAP 1" >>confdefs.h
+
+
+fi
+
+
+  # Check whether --enable-disk-preallocate was given.
+if test "${enable_disk_preallocate+set}" = set; then :
+  enableval=$enable_disk_preallocate;
+else
+  enable_disk_preallocate=no
+fi
+
+
+  if test "x$enable_disk_preallocate" = "xyes"; then :
+
+
+$as_echo "#define USE_DISK_PREALLOCATE 1" >>confdefs.h
+
+
+fi
+
+
+# Checks for the build machinery.
+
+$as_echo "#define LIBDPKG_VOLATILE_API 1" >>confdefs.h
+
+
+  # Check whether --enable-compiler-warnings was given.
+if test "${enable_compiler_warnings+set}" = set; then :
+  enableval=$enable_compiler_warnings;
+else
+  enable_compiler_warnings=yes
+fi
+
+
+  if test "x$enable_compiler_warnings" = "xyes"; then :
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wall" >&5
+$as_echo_n "checking whether $CC accepts -Wall... " >&6; }
+if ${dpkg_cv_cflags__Wall+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wall"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wall=yes
+
+else
+
+      dpkg_cv_cflags__Wall=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wall" >&5
+$as_echo "$dpkg_cv_cflags__Wall" >&6; }
+  if test "x$dpkg_cv_cflags__Wall" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wall"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wextra" >&5
+$as_echo_n "checking whether $CC accepts -Wextra... " >&6; }
+if ${dpkg_cv_cflags__Wextra+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wextra"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wextra=yes
+
+else
+
+      dpkg_cv_cflags__Wextra=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wextra" >&5
+$as_echo "$dpkg_cv_cflags__Wextra" >&6; }
+  if test "x$dpkg_cv_cflags__Wextra" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wextra"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wcast-align" >&5
+$as_echo_n "checking whether $CC accepts -Wcast-align... " >&6; }
+if ${dpkg_cv_cflags__Wcast_align+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wcast-align"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wcast_align=yes
+
+else
+
+      dpkg_cv_cflags__Wcast_align=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wcast_align" >&5
+$as_echo "$dpkg_cv_cflags__Wcast_align" >&6; }
+  if test "x$dpkg_cv_cflags__Wcast_align" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wcast-align"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wdocumentation" >&5
+$as_echo_n "checking whether $CC accepts -Wdocumentation... " >&6; }
+if ${dpkg_cv_cflags__Wdocumentation+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wdocumentation"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wdocumentation=yes
+
+else
+
+      dpkg_cv_cflags__Wdocumentation=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wdocumentation" >&5
+$as_echo "$dpkg_cv_cflags__Wdocumentation" >&6; }
+  if test "x$dpkg_cv_cflags__Wdocumentation" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wdocumentation"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wduplicated-branches" >&5
+$as_echo_n "checking whether $CC accepts -Wduplicated-branches... " >&6; }
+if ${dpkg_cv_cflags__Wduplicated_branches+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wduplicated-branches"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wduplicated_branches=yes
+
+else
+
+      dpkg_cv_cflags__Wduplicated_branches=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wduplicated_branches" >&5
+$as_echo "$dpkg_cv_cflags__Wduplicated_branches" >&6; }
+  if test "x$dpkg_cv_cflags__Wduplicated_branches" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wduplicated-branches"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wduplicated-cond" >&5
+$as_echo_n "checking whether $CC accepts -Wduplicated-cond... " >&6; }
+if ${dpkg_cv_cflags__Wduplicated_cond+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wduplicated-cond"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wduplicated_cond=yes
+
+else
+
+      dpkg_cv_cflags__Wduplicated_cond=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wduplicated_cond" >&5
+$as_echo "$dpkg_cv_cflags__Wduplicated_cond" >&6; }
+  if test "x$dpkg_cv_cflags__Wduplicated_cond" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wduplicated-cond"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wformat -Wformat-security" >&5
+$as_echo_n "checking whether $CC accepts -Wformat -Wformat-security... " >&6; }
+if ${dpkg_cv_cflags__Wformat__Wformat_security+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wformat -Wformat-security"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wformat__Wformat_security=yes
+
+else
+
+      dpkg_cv_cflags__Wformat__Wformat_security=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wformat__Wformat_security" >&5
+$as_echo "$dpkg_cv_cflags__Wformat__Wformat_security" >&6; }
+  if test "x$dpkg_cv_cflags__Wformat__Wformat_security" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wformat -Wformat-security"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wformat=2" >&5
+$as_echo_n "checking whether $CC accepts -Wformat=2... " >&6; }
+if ${dpkg_cv_cflags__Wformat_2+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wformat=2"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wformat_2=yes
+
+else
+
+      dpkg_cv_cflags__Wformat_2=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wformat_2" >&5
+$as_echo "$dpkg_cv_cflags__Wformat_2" >&6; }
+  if test "x$dpkg_cv_cflags__Wformat_2" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wformat=2"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Winit-self" >&5
+$as_echo_n "checking whether $CC accepts -Winit-self... " >&6; }
+if ${dpkg_cv_cflags__Winit_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Winit-self"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Winit_self=yes
+
+else
+
+      dpkg_cv_cflags__Winit_self=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Winit_self" >&5
+$as_echo "$dpkg_cv_cflags__Winit_self" >&6; }
+  if test "x$dpkg_cv_cflags__Winit_self" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Winit-self"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wlogical-not-parentheses" >&5
+$as_echo_n "checking whether $CC accepts -Wlogical-not-parentheses... " >&6; }
+if ${dpkg_cv_cflags__Wlogical_not_parentheses+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wlogical-not-parentheses"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wlogical_not_parentheses=yes
+
+else
+
+      dpkg_cv_cflags__Wlogical_not_parentheses=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wlogical_not_parentheses" >&5
+$as_echo "$dpkg_cv_cflags__Wlogical_not_parentheses" >&6; }
+  if test "x$dpkg_cv_cflags__Wlogical_not_parentheses" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wlogical-not-parentheses"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wlogical-op" >&5
+$as_echo_n "checking whether $CC accepts -Wlogical-op... " >&6; }
+if ${dpkg_cv_cflags__Wlogical_op+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wlogical-op"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wlogical_op=yes
+
+else
+
+      dpkg_cv_cflags__Wlogical_op=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wlogical_op" >&5
+$as_echo "$dpkg_cv_cflags__Wlogical_op" >&6; }
+  if test "x$dpkg_cv_cflags__Wlogical_op" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wlogical-op"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wmissing-declarations" >&5
+$as_echo_n "checking whether $CC accepts -Wmissing-declarations... " >&6; }
+if ${dpkg_cv_cflags__Wmissing_declarations+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wmissing-declarations"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wmissing_declarations=yes
+
+else
+
+      dpkg_cv_cflags__Wmissing_declarations=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wmissing_declarations" >&5
+$as_echo "$dpkg_cv_cflags__Wmissing_declarations" >&6; }
+  if test "x$dpkg_cv_cflags__Wmissing_declarations" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wmissing-declarations"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wmissing-format-attribute" >&5
+$as_echo_n "checking whether $CC accepts -Wmissing-format-attribute... " >&6; }
+if ${dpkg_cv_cflags__Wmissing_format_attribute+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wmissing-format-attribute"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wmissing_format_attribute=yes
+
+else
+
+      dpkg_cv_cflags__Wmissing_format_attribute=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wmissing_format_attribute" >&5
+$as_echo "$dpkg_cv_cflags__Wmissing_format_attribute" >&6; }
+  if test "x$dpkg_cv_cflags__Wmissing_format_attribute" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wmissing-format-attribute"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wno-missing-field-initializers" >&5
+$as_echo_n "checking whether $CC accepts -Wno-missing-field-initializers... " >&6; }
+if ${dpkg_cv_cflags__Wno_missing_field_initializers+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wmissing-field-initializers"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wno_missing_field_initializers=yes
+
+else
+
+      dpkg_cv_cflags__Wno_missing_field_initializers=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wno_missing_field_initializers" >&5
+$as_echo "$dpkg_cv_cflags__Wno_missing_field_initializers" >&6; }
+  if test "x$dpkg_cv_cflags__Wno_missing_field_initializers" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wno-missing-field-initializers"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wno-nonnull-compare" >&5
+$as_echo_n "checking whether $CC accepts -Wno-nonnull-compare... " >&6; }
+if ${dpkg_cv_cflags__Wno_nonnull_compare+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wnonnull-compare"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wno_nonnull_compare=yes
+
+else
+
+      dpkg_cv_cflags__Wno_nonnull_compare=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wno_nonnull_compare" >&5
+$as_echo "$dpkg_cv_cflags__Wno_nonnull_compare" >&6; }
+  if test "x$dpkg_cv_cflags__Wno_nonnull_compare" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wno-nonnull-compare"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wno-tautological-constant-out-of-range-compare" >&5
+$as_echo_n "checking whether $CC accepts -Wno-tautological-constant-out-of-range-compare... " >&6; }
+if ${dpkg_cv_cflags__Wno_tautological_constant_out_of_range_compare+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wtautological-constant-out-of-range-compare"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wno_tautological_constant_out_of_range_compare=yes
+
+else
+
+      dpkg_cv_cflags__Wno_tautological_constant_out_of_range_compare=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wno_tautological_constant_out_of_range_compare" >&5
+$as_echo "$dpkg_cv_cflags__Wno_tautological_constant_out_of_range_compare" >&6; }
+  if test "x$dpkg_cv_cflags__Wno_tautological_constant_out_of_range_compare" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wno-tautological-constant-out-of-range-compare"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wno-unused-parameter" >&5
+$as_echo_n "checking whether $CC accepts -Wno-unused-parameter... " >&6; }
+if ${dpkg_cv_cflags__Wno_unused_parameter+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wunused-parameter"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wno_unused_parameter=yes
+
+else
+
+      dpkg_cv_cflags__Wno_unused_parameter=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wno_unused_parameter" >&5
+$as_echo "$dpkg_cv_cflags__Wno_unused_parameter" >&6; }
+  if test "x$dpkg_cv_cflags__Wno_unused_parameter" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wno-unused-parameter"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wnull-dereference" >&5
+$as_echo_n "checking whether $CC accepts -Wnull-dereference... " >&6; }
+if ${dpkg_cv_cflags__Wnull_dereference+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wnull-dereference"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wnull_dereference=yes
+
+else
+
+      dpkg_cv_cflags__Wnull_dereference=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wnull_dereference" >&5
+$as_echo "$dpkg_cv_cflags__Wnull_dereference" >&6; }
+  if test "x$dpkg_cv_cflags__Wnull_dereference" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wnull-dereference"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wpointer-arith" >&5
+$as_echo_n "checking whether $CC accepts -Wpointer-arith... " >&6; }
+if ${dpkg_cv_cflags__Wpointer_arith+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wpointer-arith"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wpointer_arith=yes
+
+else
+
+      dpkg_cv_cflags__Wpointer_arith=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wpointer_arith" >&5
+$as_echo "$dpkg_cv_cflags__Wpointer_arith" >&6; }
+  if test "x$dpkg_cv_cflags__Wpointer_arith" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wpointer-arith"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wredundant-decls" >&5
+$as_echo_n "checking whether $CC accepts -Wredundant-decls... " >&6; }
+if ${dpkg_cv_cflags__Wredundant_decls+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wredundant-decls"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wredundant_decls=yes
+
+else
+
+      dpkg_cv_cflags__Wredundant_decls=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wredundant_decls" >&5
+$as_echo "$dpkg_cv_cflags__Wredundant_decls" >&6; }
+  if test "x$dpkg_cv_cflags__Wredundant_decls" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wredundant-decls"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wregister" >&5
+$as_echo_n "checking whether $CC accepts -Wregister... " >&6; }
+if ${dpkg_cv_cflags__Wregister+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wregister"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wregister=yes
+
+else
+
+      dpkg_cv_cflags__Wregister=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wregister" >&5
+$as_echo "$dpkg_cv_cflags__Wregister" >&6; }
+  if test "x$dpkg_cv_cflags__Wregister" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wregister"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wrestrict" >&5
+$as_echo_n "checking whether $CC accepts -Wrestrict... " >&6; }
+if ${dpkg_cv_cflags__Wrestrict+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wrestrict"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wrestrict=yes
+
+else
+
+      dpkg_cv_cflags__Wrestrict=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wrestrict" >&5
+$as_echo "$dpkg_cv_cflags__Wrestrict" >&6; }
+  if test "x$dpkg_cv_cflags__Wrestrict" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wrestrict"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wshadow" >&5
+$as_echo_n "checking whether $CC accepts -Wshadow... " >&6; }
+if ${dpkg_cv_cflags__Wshadow+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wshadow"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wshadow=yes
+
+else
+
+      dpkg_cv_cflags__Wshadow=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wshadow" >&5
+$as_echo "$dpkg_cv_cflags__Wshadow" >&6; }
+  if test "x$dpkg_cv_cflags__Wshadow" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wshadow"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wshift-negative-value" >&5
+$as_echo_n "checking whether $CC accepts -Wshift-negative-value... " >&6; }
+if ${dpkg_cv_cflags__Wshift_negative_value+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wshift-negative-value"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wshift_negative_value=yes
+
+else
+
+      dpkg_cv_cflags__Wshift_negative_value=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wshift_negative_value" >&5
+$as_echo "$dpkg_cv_cflags__Wshift_negative_value" >&6; }
+  if test "x$dpkg_cv_cflags__Wshift_negative_value" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wshift-negative-value"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wsizeof-array-argument" >&5
+$as_echo_n "checking whether $CC accepts -Wsizeof-array-argument... " >&6; }
+if ${dpkg_cv_cflags__Wsizeof_array_argument+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wsizeof-array-argument"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wsizeof_array_argument=yes
+
+else
+
+      dpkg_cv_cflags__Wsizeof_array_argument=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wsizeof_array_argument" >&5
+$as_echo "$dpkg_cv_cflags__Wsizeof_array_argument" >&6; }
+  if test "x$dpkg_cv_cflags__Wsizeof_array_argument" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wsizeof-array-argument"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wswitch-bool" >&5
+$as_echo_n "checking whether $CC accepts -Wswitch-bool... " >&6; }
+if ${dpkg_cv_cflags__Wswitch_bool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wswitch-bool"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wswitch_bool=yes
+
+else
+
+      dpkg_cv_cflags__Wswitch_bool=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wswitch_bool" >&5
+$as_echo "$dpkg_cv_cflags__Wswitch_bool" >&6; }
+  if test "x$dpkg_cv_cflags__Wswitch_bool" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wswitch-bool"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wvla" >&5
+$as_echo_n "checking whether $CC accepts -Wvla... " >&6; }
+if ${dpkg_cv_cflags__Wvla+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wvla"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wvla=yes
+
+else
+
+      dpkg_cv_cflags__Wvla=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wvla" >&5
+$as_echo "$dpkg_cv_cflags__Wvla" >&6; }
+  if test "x$dpkg_cv_cflags__Wvla" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wvla"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wwrite-strings" >&5
+$as_echo_n "checking whether $CC accepts -Wwrite-strings... " >&6; }
+if ${dpkg_cv_cflags__Wwrite_strings+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wwrite-strings"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wwrite_strings=yes
+
+else
+
+      dpkg_cv_cflags__Wwrite_strings=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wwrite_strings" >&5
+$as_echo "$dpkg_cv_cflags__Wwrite_strings" >&6; }
+  if test "x$dpkg_cv_cflags__Wwrite_strings" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wwrite-strings"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wbad-function-cast" >&5
+$as_echo_n "checking whether $CC accepts -Wbad-function-cast... " >&6; }
+if ${dpkg_cv_cflags__Wbad_function_cast+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wbad-function-cast"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wbad_function_cast=yes
+
+else
+
+      dpkg_cv_cflags__Wbad_function_cast=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wbad_function_cast" >&5
+$as_echo "$dpkg_cv_cflags__Wbad_function_cast" >&6; }
+  if test "x$dpkg_cv_cflags__Wbad_function_cast" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wbad-function-cast"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wc99-c11-compat" >&5
+$as_echo_n "checking whether $CC accepts -Wc99-c11-compat... " >&6; }
+if ${dpkg_cv_cflags__Wc99_c11_compat+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wc99-c11-compat"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wc99_c11_compat=yes
+
+else
+
+      dpkg_cv_cflags__Wc99_c11_compat=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wc99_c11_compat" >&5
+$as_echo "$dpkg_cv_cflags__Wc99_c11_compat" >&6; }
+  if test "x$dpkg_cv_cflags__Wc99_c11_compat" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wc99-c11-compat"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wdeclaration-after-statement" >&5
+$as_echo_n "checking whether $CC accepts -Wdeclaration-after-statement... " >&6; }
+if ${dpkg_cv_cflags__Wdeclaration_after_statement+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wdeclaration-after-statement"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wdeclaration_after_statement=yes
+
+else
+
+      dpkg_cv_cflags__Wdeclaration_after_statement=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wdeclaration_after_statement" >&5
+$as_echo "$dpkg_cv_cflags__Wdeclaration_after_statement" >&6; }
+  if test "x$dpkg_cv_cflags__Wdeclaration_after_statement" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wdeclaration-after-statement"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wmissing-prototypes" >&5
+$as_echo_n "checking whether $CC accepts -Wmissing-prototypes... " >&6; }
+if ${dpkg_cv_cflags__Wmissing_prototypes+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wmissing-prototypes"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wmissing_prototypes=yes
+
+else
+
+      dpkg_cv_cflags__Wmissing_prototypes=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wmissing_prototypes" >&5
+$as_echo "$dpkg_cv_cflags__Wmissing_prototypes" >&6; }
+  if test "x$dpkg_cv_cflags__Wmissing_prototypes" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wmissing-prototypes"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wnested-externs" >&5
+$as_echo_n "checking whether $CC accepts -Wnested-externs... " >&6; }
+if ${dpkg_cv_cflags__Wnested_externs+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wnested-externs"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wnested_externs=yes
+
+else
+
+      dpkg_cv_cflags__Wnested_externs=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wnested_externs" >&5
+$as_echo "$dpkg_cv_cflags__Wnested_externs" >&6; }
+  if test "x$dpkg_cv_cflags__Wnested_externs" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wnested-externs"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wold-style-definition" >&5
+$as_echo_n "checking whether $CC accepts -Wold-style-definition... " >&6; }
+if ${dpkg_cv_cflags__Wold_style_definition+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wold-style-definition"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wold_style_definition=yes
+
+else
+
+      dpkg_cv_cflags__Wold_style_definition=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wold_style_definition" >&5
+$as_echo "$dpkg_cv_cflags__Wold_style_definition" >&6; }
+  if test "x$dpkg_cv_cflags__Wold_style_definition" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wold-style-definition"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -Wstrict-prototypes" >&5
+$as_echo_n "checking whether $CC accepts -Wstrict-prototypes... " >&6; }
+if ${dpkg_cv_cflags__Wstrict_prototypes+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CFLAGS=$CFLAGS
+    CFLAGS="-Werror -Wstrict-prototypes"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+      dpkg_cv_cflags__Wstrict_prototypes=yes
+
+else
+
+      dpkg_cv_cflags__Wstrict_prototypes=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CFLAGS=$dpkg_save_CFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cflags__Wstrict_prototypes" >&5
+$as_echo "$dpkg_cv_cflags__Wstrict_prototypes" >&6; }
+  if test "x$dpkg_cv_cflags__Wstrict_prototypes" = xyes; then :
+
+    as_fn_append COMPILER_CFLAGS " -Wstrict-prototypes"
+
+fi
+
+
+
+
+    ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wall" >&5
+$as_echo_n "checking whether $CXX accepts -Wall... " >&6; }
+if ${dpkg_cv_cxxflags__Wall+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wall"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wall=yes
+
+else
+
+      dpkg_cv_cxxflags__Wall=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wall" >&5
+$as_echo "$dpkg_cv_cxxflags__Wall" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wall" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wall"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wextra" >&5
+$as_echo_n "checking whether $CXX accepts -Wextra... " >&6; }
+if ${dpkg_cv_cxxflags__Wextra+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wextra"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wextra=yes
+
+else
+
+      dpkg_cv_cxxflags__Wextra=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wextra" >&5
+$as_echo "$dpkg_cv_cxxflags__Wextra" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wextra" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wextra"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wcast-align" >&5
+$as_echo_n "checking whether $CXX accepts -Wcast-align... " >&6; }
+if ${dpkg_cv_cxxflags__Wcast_align+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wcast-align"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wcast_align=yes
+
+else
+
+      dpkg_cv_cxxflags__Wcast_align=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wcast_align" >&5
+$as_echo "$dpkg_cv_cxxflags__Wcast_align" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wcast_align" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wcast-align"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wdocumentation" >&5
+$as_echo_n "checking whether $CXX accepts -Wdocumentation... " >&6; }
+if ${dpkg_cv_cxxflags__Wdocumentation+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wdocumentation"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wdocumentation=yes
+
+else
+
+      dpkg_cv_cxxflags__Wdocumentation=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wdocumentation" >&5
+$as_echo "$dpkg_cv_cxxflags__Wdocumentation" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wdocumentation" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wdocumentation"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wduplicated-branches" >&5
+$as_echo_n "checking whether $CXX accepts -Wduplicated-branches... " >&6; }
+if ${dpkg_cv_cxxflags__Wduplicated_branches+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wduplicated-branches"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wduplicated_branches=yes
+
+else
+
+      dpkg_cv_cxxflags__Wduplicated_branches=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wduplicated_branches" >&5
+$as_echo "$dpkg_cv_cxxflags__Wduplicated_branches" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wduplicated_branches" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wduplicated-branches"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wduplicated-cond" >&5
+$as_echo_n "checking whether $CXX accepts -Wduplicated-cond... " >&6; }
+if ${dpkg_cv_cxxflags__Wduplicated_cond+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wduplicated-cond"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wduplicated_cond=yes
+
+else
+
+      dpkg_cv_cxxflags__Wduplicated_cond=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wduplicated_cond" >&5
+$as_echo "$dpkg_cv_cxxflags__Wduplicated_cond" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wduplicated_cond" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wduplicated-cond"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wformat -Wformat-security" >&5
+$as_echo_n "checking whether $CXX accepts -Wformat -Wformat-security... " >&6; }
+if ${dpkg_cv_cxxflags__Wformat__Wformat_security+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wformat -Wformat-security"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wformat__Wformat_security=yes
+
+else
+
+      dpkg_cv_cxxflags__Wformat__Wformat_security=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wformat__Wformat_security" >&5
+$as_echo "$dpkg_cv_cxxflags__Wformat__Wformat_security" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wformat__Wformat_security" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wformat -Wformat-security"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wformat=2" >&5
+$as_echo_n "checking whether $CXX accepts -Wformat=2... " >&6; }
+if ${dpkg_cv_cxxflags__Wformat_2+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wformat=2"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wformat_2=yes
+
+else
+
+      dpkg_cv_cxxflags__Wformat_2=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wformat_2" >&5
+$as_echo "$dpkg_cv_cxxflags__Wformat_2" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wformat_2" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wformat=2"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Winit-self" >&5
+$as_echo_n "checking whether $CXX accepts -Winit-self... " >&6; }
+if ${dpkg_cv_cxxflags__Winit_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Winit-self"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Winit_self=yes
+
+else
+
+      dpkg_cv_cxxflags__Winit_self=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Winit_self" >&5
+$as_echo "$dpkg_cv_cxxflags__Winit_self" >&6; }
+  if test "x$dpkg_cv_cxxflags__Winit_self" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Winit-self"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wlogical-not-parentheses" >&5
+$as_echo_n "checking whether $CXX accepts -Wlogical-not-parentheses... " >&6; }
+if ${dpkg_cv_cxxflags__Wlogical_not_parentheses+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wlogical-not-parentheses"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wlogical_not_parentheses=yes
+
+else
+
+      dpkg_cv_cxxflags__Wlogical_not_parentheses=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wlogical_not_parentheses" >&5
+$as_echo "$dpkg_cv_cxxflags__Wlogical_not_parentheses" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wlogical_not_parentheses" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wlogical-not-parentheses"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wlogical-op" >&5
+$as_echo_n "checking whether $CXX accepts -Wlogical-op... " >&6; }
+if ${dpkg_cv_cxxflags__Wlogical_op+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wlogical-op"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wlogical_op=yes
+
+else
+
+      dpkg_cv_cxxflags__Wlogical_op=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wlogical_op" >&5
+$as_echo "$dpkg_cv_cxxflags__Wlogical_op" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wlogical_op" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wlogical-op"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wmissing-declarations" >&5
+$as_echo_n "checking whether $CXX accepts -Wmissing-declarations... " >&6; }
+if ${dpkg_cv_cxxflags__Wmissing_declarations+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wmissing-declarations"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wmissing_declarations=yes
+
+else
+
+      dpkg_cv_cxxflags__Wmissing_declarations=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wmissing_declarations" >&5
+$as_echo "$dpkg_cv_cxxflags__Wmissing_declarations" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wmissing_declarations" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wmissing-declarations"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wmissing-format-attribute" >&5
+$as_echo_n "checking whether $CXX accepts -Wmissing-format-attribute... " >&6; }
+if ${dpkg_cv_cxxflags__Wmissing_format_attribute+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wmissing-format-attribute"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wmissing_format_attribute=yes
+
+else
+
+      dpkg_cv_cxxflags__Wmissing_format_attribute=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wmissing_format_attribute" >&5
+$as_echo "$dpkg_cv_cxxflags__Wmissing_format_attribute" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wmissing_format_attribute" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wmissing-format-attribute"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wno-missing-field-initializers" >&5
+$as_echo_n "checking whether $CXX accepts -Wno-missing-field-initializers... " >&6; }
+if ${dpkg_cv_cxxflags__Wno_missing_field_initializers+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wmissing-field-initializers"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wno_missing_field_initializers=yes
+
+else
+
+      dpkg_cv_cxxflags__Wno_missing_field_initializers=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wno_missing_field_initializers" >&5
+$as_echo "$dpkg_cv_cxxflags__Wno_missing_field_initializers" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wno_missing_field_initializers" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wno-missing-field-initializers"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wno-nonnull-compare" >&5
+$as_echo_n "checking whether $CXX accepts -Wno-nonnull-compare... " >&6; }
+if ${dpkg_cv_cxxflags__Wno_nonnull_compare+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wnonnull-compare"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wno_nonnull_compare=yes
+
+else
+
+      dpkg_cv_cxxflags__Wno_nonnull_compare=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wno_nonnull_compare" >&5
+$as_echo "$dpkg_cv_cxxflags__Wno_nonnull_compare" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wno_nonnull_compare" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wno-nonnull-compare"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wno-tautological-constant-out-of-range-compare" >&5
+$as_echo_n "checking whether $CXX accepts -Wno-tautological-constant-out-of-range-compare... " >&6; }
+if ${dpkg_cv_cxxflags__Wno_tautological_constant_out_of_range_compare+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wtautological-constant-out-of-range-compare"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wno_tautological_constant_out_of_range_compare=yes
+
+else
+
+      dpkg_cv_cxxflags__Wno_tautological_constant_out_of_range_compare=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wno_tautological_constant_out_of_range_compare" >&5
+$as_echo "$dpkg_cv_cxxflags__Wno_tautological_constant_out_of_range_compare" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wno_tautological_constant_out_of_range_compare" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wno-tautological-constant-out-of-range-compare"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wno-unused-parameter" >&5
+$as_echo_n "checking whether $CXX accepts -Wno-unused-parameter... " >&6; }
+if ${dpkg_cv_cxxflags__Wno_unused_parameter+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wunused-parameter"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wno_unused_parameter=yes
+
+else
+
+      dpkg_cv_cxxflags__Wno_unused_parameter=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wno_unused_parameter" >&5
+$as_echo "$dpkg_cv_cxxflags__Wno_unused_parameter" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wno_unused_parameter" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wno-unused-parameter"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wnull-dereference" >&5
+$as_echo_n "checking whether $CXX accepts -Wnull-dereference... " >&6; }
+if ${dpkg_cv_cxxflags__Wnull_dereference+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wnull-dereference"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wnull_dereference=yes
+
+else
+
+      dpkg_cv_cxxflags__Wnull_dereference=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wnull_dereference" >&5
+$as_echo "$dpkg_cv_cxxflags__Wnull_dereference" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wnull_dereference" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wnull-dereference"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wpointer-arith" >&5
+$as_echo_n "checking whether $CXX accepts -Wpointer-arith... " >&6; }
+if ${dpkg_cv_cxxflags__Wpointer_arith+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wpointer-arith"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wpointer_arith=yes
+
+else
+
+      dpkg_cv_cxxflags__Wpointer_arith=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wpointer_arith" >&5
+$as_echo "$dpkg_cv_cxxflags__Wpointer_arith" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wpointer_arith" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wpointer-arith"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wredundant-decls" >&5
+$as_echo_n "checking whether $CXX accepts -Wredundant-decls... " >&6; }
+if ${dpkg_cv_cxxflags__Wredundant_decls+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wredundant-decls"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wredundant_decls=yes
+
+else
+
+      dpkg_cv_cxxflags__Wredundant_decls=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wredundant_decls" >&5
+$as_echo "$dpkg_cv_cxxflags__Wredundant_decls" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wredundant_decls" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wredundant-decls"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wregister" >&5
+$as_echo_n "checking whether $CXX accepts -Wregister... " >&6; }
+if ${dpkg_cv_cxxflags__Wregister+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wregister"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wregister=yes
+
+else
+
+      dpkg_cv_cxxflags__Wregister=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wregister" >&5
+$as_echo "$dpkg_cv_cxxflags__Wregister" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wregister" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wregister"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wrestrict" >&5
+$as_echo_n "checking whether $CXX accepts -Wrestrict... " >&6; }
+if ${dpkg_cv_cxxflags__Wrestrict+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wrestrict"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wrestrict=yes
+
+else
+
+      dpkg_cv_cxxflags__Wrestrict=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wrestrict" >&5
+$as_echo "$dpkg_cv_cxxflags__Wrestrict" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wrestrict" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wrestrict"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wshadow" >&5
+$as_echo_n "checking whether $CXX accepts -Wshadow... " >&6; }
+if ${dpkg_cv_cxxflags__Wshadow+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wshadow"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wshadow=yes
+
+else
+
+      dpkg_cv_cxxflags__Wshadow=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wshadow" >&5
+$as_echo "$dpkg_cv_cxxflags__Wshadow" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wshadow" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wshadow"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wshift-negative-value" >&5
+$as_echo_n "checking whether $CXX accepts -Wshift-negative-value... " >&6; }
+if ${dpkg_cv_cxxflags__Wshift_negative_value+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wshift-negative-value"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wshift_negative_value=yes
+
+else
+
+      dpkg_cv_cxxflags__Wshift_negative_value=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wshift_negative_value" >&5
+$as_echo "$dpkg_cv_cxxflags__Wshift_negative_value" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wshift_negative_value" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wshift-negative-value"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wsizeof-array-argument" >&5
+$as_echo_n "checking whether $CXX accepts -Wsizeof-array-argument... " >&6; }
+if ${dpkg_cv_cxxflags__Wsizeof_array_argument+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wsizeof-array-argument"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wsizeof_array_argument=yes
+
+else
+
+      dpkg_cv_cxxflags__Wsizeof_array_argument=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wsizeof_array_argument" >&5
+$as_echo "$dpkg_cv_cxxflags__Wsizeof_array_argument" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wsizeof_array_argument" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wsizeof-array-argument"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wswitch-bool" >&5
+$as_echo_n "checking whether $CXX accepts -Wswitch-bool... " >&6; }
+if ${dpkg_cv_cxxflags__Wswitch_bool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wswitch-bool"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wswitch_bool=yes
+
+else
+
+      dpkg_cv_cxxflags__Wswitch_bool=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wswitch_bool" >&5
+$as_echo "$dpkg_cv_cxxflags__Wswitch_bool" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wswitch_bool" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wswitch-bool"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wvla" >&5
+$as_echo_n "checking whether $CXX accepts -Wvla... " >&6; }
+if ${dpkg_cv_cxxflags__Wvla+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wvla"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wvla=yes
+
+else
+
+      dpkg_cv_cxxflags__Wvla=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wvla" >&5
+$as_echo "$dpkg_cv_cxxflags__Wvla" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wvla" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wvla"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wwrite-strings" >&5
+$as_echo_n "checking whether $CXX accepts -Wwrite-strings... " >&6; }
+if ${dpkg_cv_cxxflags__Wwrite_strings+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wwrite-strings"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wwrite_strings=yes
+
+else
+
+      dpkg_cv_cxxflags__Wwrite_strings=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wwrite_strings" >&5
+$as_echo "$dpkg_cv_cxxflags__Wwrite_strings" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wwrite_strings" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wwrite-strings"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wc++11-compat" >&5
+$as_echo_n "checking whether $CXX accepts -Wc++11-compat... " >&6; }
+if ${dpkg_cv_cxxflags__Wcpp11_compat+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wc++11-compat"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wcpp11_compat=yes
+
+else
+
+      dpkg_cv_cxxflags__Wcpp11_compat=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wcpp11_compat" >&5
+$as_echo "$dpkg_cv_cxxflags__Wcpp11_compat" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wcpp11_compat" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wc++11-compat"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wcast-qual" >&5
+$as_echo_n "checking whether $CXX accepts -Wcast-qual... " >&6; }
+if ${dpkg_cv_cxxflags__Wcast_qual+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wcast-qual"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wcast_qual=yes
+
+else
+
+      dpkg_cv_cxxflags__Wcast_qual=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wcast_qual" >&5
+$as_echo "$dpkg_cv_cxxflags__Wcast_qual" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wcast_qual" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wcast-qual"
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wold-style-cast" >&5
+$as_echo_n "checking whether $CXX accepts -Wold-style-cast... " >&6; }
+if ${dpkg_cv_cxxflags__Wold_style_cast+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wold-style-cast"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wold_style_cast=yes
+
+else
+
+      dpkg_cv_cxxflags__Wold_style_cast=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wold_style_cast" >&5
+$as_echo "$dpkg_cv_cxxflags__Wold_style_cast" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wold_style_cast" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wold-style-cast"
+
+fi
+
+
+    if test "x$dpkg_cv_cxx11" = "xyes"; then :
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -Wzero-as-null-pointer-constant" >&5
+$as_echo_n "checking whether $CXX accepts -Wzero-as-null-pointer-constant... " >&6; }
+if ${dpkg_cv_cxxflags__Wzero_as_null_pointer_constant+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+    dpkg_save_CXXFLAGS=$CXXFLAGS
+    CXXFLAGS="-Werror -Wzero-as-null-pointer-constant"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+      dpkg_cv_cxxflags__Wzero_as_null_pointer_constant=yes
+
+else
+
+      dpkg_cv_cxxflags__Wzero_as_null_pointer_constant=no
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+    CXXFLAGS=$dpkg_save_CXXFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_cv_cxxflags__Wzero_as_null_pointer_constant" >&5
+$as_echo "$dpkg_cv_cxxflags__Wzero_as_null_pointer_constant" >&6; }
+  if test "x$dpkg_cv_cxxflags__Wzero_as_null_pointer_constant" = xyes; then :
+
+    as_fn_append COMPILER_CXXFLAGS " -Wzero-as-null-pointer-constant"
+
+fi
+
+
+
+fi
+
+
+    ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+    CFLAGS="$COMPILER_CFLAGS $CFLAGS"
+    CXXFLAGS="$COMPILER_CXXFLAGS $CXXFLAGS"
+
+fi
+
+
+  # Check whether --enable-compiler-optimizations was given.
+if test "${enable_compiler_optimizations+set}" = set; then :
+  enableval=$enable_compiler_optimizations;
+else
+  enable_compiler_optimizations=yes
+fi
+
+
+  if test "x$enable_compiler_optimizations" = "xno"; then :
+
+    CFLAGS=$(echo "$CFLAGS" | sed -e "s/ -O[1-9]*\b/ -O0/g")
+
+fi
+
+
+  # Check whether --enable-linker-optimizations was given.
+if test "${enable_linker_optimizations+set}" = set; then :
+  enableval=$enable_linker_optimizations;
+else
+  enable_linker_optimizations=yes
+fi
+
+
+  if test "x$enable_linker_optimizations" = "xno"; then :
+
+    LDFLAGS=$(echo "$LDFLAGS" | sed -e "s/ -Wl,-O[0-9]*\b//g")
+
+else
+
+    save_LDFLAGS=$LDFLAGS
+    LDFLAGS="$LDFLAGS -Wl,-O1"
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+else
+
+      LDFLAGS="$save_LDFLAGS"
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+fi
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dpkg cpu type" >&5
+$as_echo_n "checking dpkg cpu type... " >&6; }
+
+      cpu_type=$(PERL=$PERL $srcdir/run-script scripts/dpkg-architecture.pl -t$host -qDEB_HOST_ARCH_CPU 2>/dev/null)
+
+  if test "x$cpu_type" = "x"; then :
+
+    cpu_type=$host_cpu
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cpu_type" >&5
+$as_echo "$cpu_type" >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $host_cpu not found in cputable" >&5
+$as_echo "$as_me: WARNING: $host_cpu not found in cputable" >&2;}
+
+else
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $cpu_type" >&5
+$as_echo "$cpu_type" >&6; }
+
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define ARCHITECTURE_CPU "${cpu_type}"
+_ACEOF
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dpkg operating system type" >&5
+$as_echo_n "checking dpkg operating system type... " >&6; }
+
+      os_type=$(PERL=$PERL $srcdir/run-script scripts/dpkg-architecture.pl -t$host -qDEB_HOST_ARCH_OS 2>/dev/null)
+
+  if test "x$os_type" = "x"; then :
+
+    os_type=$host_os
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $os_type" >&5
+$as_echo "$os_type" >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $host_os not found in ostable" >&5
+$as_echo "$as_me: WARNING: $host_os not found in ostable" >&2;}
+
+else
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $os_type" >&5
+$as_echo "$os_type" >&6; }
+
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define ARCHITECTURE_OS "${os_type}"
+_ACEOF
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dpkg architecture name" >&5
+$as_echo_n "checking dpkg architecture name... " >&6; }
+
+      dpkg_arch=$(PERL=$PERL $srcdir/run-script scripts/dpkg-architecture.pl -t$host -qDEB_HOST_ARCH 2>/dev/null)
+
+  if test "x$dpkg_arch" = "x"; then :
+
+    as_fn_error $? "cannot determine host dpkg architecture" "$LINENO" 5
+
+else
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $dpkg_arch" >&5
+$as_echo "$dpkg_arch" >&6; }
+
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define ARCHITECTURE "${dpkg_arch}"
+_ACEOF
+
+
+
+$as_echo "#define PACKAGE_RELEASE PACKAGE_VERSION \" (\" ARCHITECTURE \")\"" >>confdefs.h
+
+
+ac_config_commands="$ac_config_commands t-func/atconfig"
+
+
+AUTOM4TE=${AUTOM4TE-"${am_missing_run}autom4te"}
+
+
+ac_config_files="$ac_config_files Makefile t-func/Makefile t-func/atlocal dpkg-deb/Makefile dpkg-split/Makefile dselect/Makefile dselect/methods/Makefile dselect/po/Makefile.in lib/Makefile lib/compat/Makefile lib/dpkg/Makefile lib/dpkg/libdpkg.pc lib/dpkg/t/Makefile doc/Doxyfile man/Makefile po/Makefile.in scripts/Build.PL scripts/Makefile scripts/README.cpan scripts/mk/Makefile scripts/po/Makefile.in src/Makefile utils/Makefile"
+
+ac_config_headers="$ac_config_headers config.h"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${PACKAGE_DIST_IS_RELEASE_TRUE}" && test -z "${PACKAGE_DIST_IS_RELEASE_FALSE}"; then
+  as_fn_error $? "conditional \"PACKAGE_DIST_IS_RELEASE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+   if test -n "$am_sleep_pid"; then
+     # Hide warnings about reused PIDs.
+     wait $am_sleep_pid 2>/dev/null
+   fi
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${BUILD_SHARED_TRUE}" && test -z "${BUILD_SHARED_FALSE}"; then
+  as_fn_error $? "conditional \"BUILD_SHARED\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_LINKER_AS_NEEDED_TRUE}" && test -z "${HAVE_LINKER_AS_NEEDED_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_LINKER_AS_NEEDED\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_LINKER_VERSION_SCRIPT_TRUE}" && test -z "${HAVE_LINKER_VERSION_SCRIPT_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_LINKER_VERSION_SCRIPT\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${BUILD_DSELECT_TRUE}" && test -z "${BUILD_DSELECT_FALSE}"; then
+  as_fn_error $? "conditional \"BUILD_DSELECT\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${BUILD_START_STOP_DAEMON_TRUE}" && test -z "${BUILD_START_STOP_DAEMON_FALSE}"; then
+  as_fn_error $? "conditional \"BUILD_START_STOP_DAEMON\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${BUILD_UPDATE_ALTERNATIVES_TRUE}" && test -z "${BUILD_UPDATE_ALTERNATIVES_FALSE}"; then
+  as_fn_error $? "conditional \"BUILD_UPDATE_ALTERNATIVES\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${BUILD_POD_DOC_TRUE}" && test -z "${BUILD_POD_DOC_FALSE}"; then
+  as_fn_error $? "conditional \"BUILD_POD_DOC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${COVERAGE_ENABLED_TRUE}" && test -z "${COVERAGE_ENABLED_FALSE}"; then
+  as_fn_error $? "conditional \"COVERAGE_ENABLED\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_LIBMD_MD5_TRUE}" && test -z "${HAVE_LIBMD_MD5_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_LIBMD_MD5\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${WITH_LIBSELINUX_TRUE}" && test -z "${WITH_LIBSELINUX_FALSE}"; then
+  as_fn_error $? "conditional \"WITH_LIBSELINUX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_SETEXECFILECON_TRUE}" && test -z "${HAVE_SETEXECFILECON_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_SETEXECFILECON\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+if test -z "${HAVE_SYS_ERRLIST_TRUE}" && test -z "${HAVE_SYS_ERRLIST_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_SYS_ERRLIST\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_C99_SNPRINTF_TRUE}" && test -z "${HAVE_C99_SNPRINTF_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_C99_SNPRINTF\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_GETOPT_TRUE}" && test -z "${HAVE_GETOPT_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_GETOPT\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_GETOPT_LONG_TRUE}" && test -z "${HAVE_GETOPT_LONG_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_GETOPT_LONG\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_OBSTACK_FREE_TRUE}" && test -z "${HAVE_OBSTACK_FREE_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_OBSTACK_FREE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_STRCHRNUL_TRUE}" && test -z "${HAVE_STRCHRNUL_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_STRCHRNUL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_STRNLEN_TRUE}" && test -z "${HAVE_STRNLEN_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_STRNLEN\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_STRNDUP_TRUE}" && test -z "${HAVE_STRNDUP_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_STRNDUP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_STRERROR_TRUE}" && test -z "${HAVE_STRERROR_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_STRERROR\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_STRSIGNAL_TRUE}" && test -z "${HAVE_STRSIGNAL_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_STRSIGNAL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_ASPRINTF_TRUE}" && test -z "${HAVE_ASPRINTF_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_ASPRINTF\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_SCANDIR_TRUE}" && test -z "${HAVE_SCANDIR_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_SCANDIR\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_ALPHASORT_TRUE}" && test -z "${HAVE_ALPHASORT_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_ALPHASORT\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_UNSETENV_TRUE}" && test -z "${HAVE_UNSETENV_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_UNSETENV\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -pR'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -pR'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -pR'
+  fi
+else
+  as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+  test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by dpkg $as_me 1.20.7.1, which was
+generated by GNU Autoconf 2.69.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <debian-dpkg@lists.debian.org>.
+dpkg home page: <https://wiki.debian.org/Teams/Dpkg>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+dpkg config.status 1.20.7.1
+configured by $0, generated by GNU Autoconf 2.69,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+    # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS.
+    OBSOLETE_ALL_LINGUAS="$ALL_LINGUAS"
+    # Capture the value of LINGUAS because we need it to compute CATALOGS.
+    LINGUAS="${LINGUAS-%UNSET%}"
+
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
+nm_file_list_spec \
+lt_cv_truncate_bin \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+reload_flag_CXX \
+compiler_CXX \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_static_CXX \
+lt_cv_prog_compiler_c_o_CXX \
+export_dynamic_flag_spec_CXX \
+whole_archive_flag_spec_CXX \
+compiler_needs_object_CXX \
+with_gnu_ld_CXX \
+allow_undefined_flag_CXX \
+no_undefined_flag_CXX \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_separator_CXX \
+exclude_expsyms_CXX \
+include_expsyms_CXX \
+file_list_spec_CXX \
+compiler_lib_search_dirs_CXX \
+predep_objects_CXX \
+postdep_objects_CXX \
+predeps_CXX \
+postdeps_CXX \
+compiler_lib_search_path_CXX; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path \
+reload_cmds_CXX \
+old_archive_cmds_CXX \
+old_archive_from_new_cmds_CXX \
+old_archive_from_expsyms_cmds_CXX \
+archive_cmds_CXX \
+archive_expsym_cmds_CXX \
+module_cmds_CXX \
+module_expsym_cmds_CXX \
+export_symbols_cmds_CXX \
+prelink_cmds_CXX \
+postlink_cmds_CXX; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+
+# See if we are running on zsh, and set the options that allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}"; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "t-func/atconfig") CONFIG_COMMANDS="$CONFIG_COMMANDS t-func/atconfig" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "t-func/Makefile") CONFIG_FILES="$CONFIG_FILES t-func/Makefile" ;;
+    "t-func/atlocal") CONFIG_FILES="$CONFIG_FILES t-func/atlocal" ;;
+    "dpkg-deb/Makefile") CONFIG_FILES="$CONFIG_FILES dpkg-deb/Makefile" ;;
+    "dpkg-split/Makefile") CONFIG_FILES="$CONFIG_FILES dpkg-split/Makefile" ;;
+    "dselect/Makefile") CONFIG_FILES="$CONFIG_FILES dselect/Makefile" ;;
+    "dselect/methods/Makefile") CONFIG_FILES="$CONFIG_FILES dselect/methods/Makefile" ;;
+    "dselect/po/Makefile.in") CONFIG_FILES="$CONFIG_FILES dselect/po/Makefile.in" ;;
+    "lib/Makefile") CONFIG_FILES="$CONFIG_FILES lib/Makefile" ;;
+    "lib/compat/Makefile") CONFIG_FILES="$CONFIG_FILES lib/compat/Makefile" ;;
+    "lib/dpkg/Makefile") CONFIG_FILES="$CONFIG_FILES lib/dpkg/Makefile" ;;
+    "lib/dpkg/libdpkg.pc") CONFIG_FILES="$CONFIG_FILES lib/dpkg/libdpkg.pc" ;;
+    "lib/dpkg/t/Makefile") CONFIG_FILES="$CONFIG_FILES lib/dpkg/t/Makefile" ;;
+    "doc/Doxyfile") CONFIG_FILES="$CONFIG_FILES doc/Doxyfile" ;;
+    "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
+    "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+    "scripts/Build.PL") CONFIG_FILES="$CONFIG_FILES scripts/Build.PL" ;;
+    "scripts/Makefile") CONFIG_FILES="$CONFIG_FILES scripts/Makefile" ;;
+    "scripts/README.cpan") CONFIG_FILES="$CONFIG_FILES scripts/README.cpan" ;;
+    "scripts/mk/Makefile") CONFIG_FILES="$CONFIG_FILES scripts/mk/Makefile" ;;
+    "scripts/po/Makefile.in") CONFIG_FILES="$CONFIG_FILES scripts/po/Makefile.in" ;;
+    "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+    "utils/Makefile") CONFIG_FILES="$CONFIG_FILES utils/Makefile" ;;
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Older Autoconf quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  # TODO: see whether this extra hack can be removed once we start
+  # requiring Autoconf 2.70 or later.
+  case $CONFIG_FILES in #(
+  *\'*) :
+    eval set x "$CONFIG_FILES" ;; #(
+  *) :
+    set x $CONFIG_FILES ;; #(
+  *) :
+     ;;
+esac
+  shift
+  # Used to flag and report bootstrapping failures.
+  am_rc=0
+  for am_mf
+  do
+    # Strip MF so we end up with the name of the file.
+    am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile which includes
+    # dependency-tracking related rules and includes.
+    # Grep'ing the whole file directly is not great: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+      || continue
+    am_dirpart=`$as_dirname -- "$am_mf" ||
+$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$am_mf" : 'X\(//\)[^/]' \| \
+	 X"$am_mf" : 'X\(//\)$' \| \
+	 X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$am_mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    am_filepart=`$as_basename -- "$am_mf" ||
+$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$am_mf" : 'X\(//\)$' \| \
+	 X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$am_mf" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    { echo "$as_me:$LINENO: cd "$am_dirpart" \
+      && sed -e '/# am--include-marker/d' "$am_filepart" \
+        | $MAKE -f - am--depfiles" >&5
+   (cd "$am_dirpart" \
+      && sed -e '/# am--include-marker/d' "$am_filepart" \
+        | $MAKE -f - am--depfiles) >&5 2>&5
+   ac_status=$?
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   (exit $ac_status); } || am_rc=$?
+  done
+  if test $am_rc -ne 0; then
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "Something went wrong bootstrapping makefile fragments
+    for automatic dependency tracking.  Try re-running configure with the
+    '--disable-dependency-tracking' option to at least be able to build
+    the package (albeit without support for automatic dependency tracking).
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+  { am_dirpart=; unset am_dirpart;}
+  { am_filepart=; unset am_filepart;}
+  { am_mf=; unset am_mf;}
+  { am_rc=; unset am_rc;}
+  rm -f conftest-deps.mk
+}
+ ;;
+    "po-directories":C)
+    for ac_file in $CONFIG_FILES; do
+      # Support "outfile[:infile[:infile...]]"
+      case "$ac_file" in
+        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+      esac
+      # PO directories have a Makefile.in generated from Makefile.in.in.
+      case "$ac_file" in */Makefile.in)
+        # Adjust a relative srcdir.
+        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+        ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+        # In autoconf-2.13 it is called $ac_given_srcdir.
+        # In autoconf-2.50 it is called $srcdir.
+        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+        case "$ac_given_srcdir" in
+          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+          /*) top_srcdir="$ac_given_srcdir" ;;
+          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+        esac
+        # Treat a directory as a PO directory if and only if it has a
+        # POTFILES.in file. This allows packages to have multiple PO
+        # directories under different names or in different locations.
+        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+          rm -f "$ac_dir/POTFILES"
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+          gt_tab=`printf '\t'`
+          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+          POMAKEFILEDEPS="POTFILES.in"
+          # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+          # on $ac_dir but don't depend on user-specified configuration
+          # parameters.
+          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+            # The LINGUAS file contains the set of available languages.
+            if test -n "$OBSOLETE_ALL_LINGUAS"; then
+              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+            fi
+            ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+            POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+          else
+            # The set of available languages was given in configure.in.
+            ALL_LINGUAS=$OBSOLETE_ALL_LINGUAS
+          fi
+          # Compute POFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+          # Compute UPDATEPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+          # Compute DUMMYPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+          # Compute GMOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+          case "$ac_given_srcdir" in
+            .) srcdirpre= ;;
+            *) srcdirpre='$(srcdir)/' ;;
+          esac
+          POFILES=
+          UPDATEPOFILES=
+          DUMMYPOFILES=
+          GMOFILES=
+          for lang in $ALL_LINGUAS; do
+            POFILES="$POFILES $srcdirpre$lang.po"
+            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+          done
+          # CATALOGS depends on both $ac_dir and the user's LINGUAS
+          # environment variable.
+          INST_LINGUAS=
+          if test -n "$ALL_LINGUAS"; then
+            for presentlang in $ALL_LINGUAS; do
+              useit=no
+              if test "%UNSET%" != "$LINGUAS"; then
+                desiredlanguages="$LINGUAS"
+              else
+                desiredlanguages="$ALL_LINGUAS"
+              fi
+              for desiredlang in $desiredlanguages; do
+                # Use the presentlang catalog if desiredlang is
+                #   a. equal to presentlang, or
+                #   b. a variant of presentlang (because in this case,
+                #      presentlang can be used as a fallback for messages
+                #      which are not translated in the desiredlang catalog).
+                case "$desiredlang" in
+                  "$presentlang"*) useit=yes;;
+                esac
+              done
+              if test $useit = yes; then
+                INST_LINGUAS="$INST_LINGUAS $presentlang"
+              fi
+            done
+          fi
+          CATALOGS=
+          if test -n "$INST_LINGUAS"; then
+            for lang in $INST_LINGUAS; do
+              CATALOGS="$CATALOGS $lang.gmo"
+            done
+          fi
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+            if test -f "$f"; then
+              case "$f" in
+                *.orig | *.bak | *~) ;;
+                *) cat "$f" >> "$ac_dir/Makefile" ;;
+              esac
+            fi
+          done
+        fi
+        ;;
+      esac
+    done ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options that allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}"; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile=${ofile}T
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags='CXX '
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and where our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test set != "${COLLECT_NAMES+set}"; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain=$ac_aux_dir/ltmain.sh
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_CXX
+reload_cmds=$lt_reload_cmds_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_CXX
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
+
+ ;;
+    "t-func/atconfig":C) cat >t-func/atconfig <<ATEOF
+# Configurable variable values for building test suites.
+# Generated by $0.
+# Copyright (C) 2012 Free Software Foundation, Inc.
+
+# The test suite will define top_srcdir=$at_top_srcdir/../.. etc.
+at_testdir='t-func'
+abs_builddir='$ac_abs_builddir'
+at_srcdir='$ac_srcdir'
+abs_srcdir='$ac_abs_srcdir'
+at_top_srcdir='$ac_top_srcdir'
+abs_top_srcdir='$ac_abs_top_srcdir'
+at_top_build_prefix='$ac_top_build_prefix'
+abs_top_builddir='$ac_abs_top_builddir'
+
+# Backward compatibility with Autotest <= 2.59b:
+at_top_builddir=\$at_top_build_prefix
+
+AUTOTEST_PATH='t-func'
+
+SHELL=\${CONFIG_SHELL-'$SHELL'}
+ATEOF
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
+
+# Print the current configuration
+cat <<CONFIG
+
+Configuration:
+  Features:
+    native language support . . . : $USE_NLS
+    unicode support . . . . . . . : $USE_UNICODE
+    development documentation . . : $build_devel_docs
+    code coverage . . . . . . . . : $enable_coverage
+    build shared libraries  . . . : $enable_shared
+    mmap loaders  . . . . . . . . : $enable_mmap
+    disk pre-allocation . . . . . : $enable_disk_preallocate
+    default dpkg-deb compressor . : $with_dpkg_deb_compressor
+
+  Paths:
+    devlibdir . . . . . . . . . . : $devlibdir
+    pkgconfdir  . . . . . . . . . : $pkgconfdir
+    admindir  . . . . . . . . . . : $admindir
+    logdir  . . . . . . . . . . . : $logdir
+    perl interpreter  . . . . . . : $PERL
+    perl libdir . . . . . . . . . : $PERL_LIBDIR
+
+  Programs:
+    update-alternatives . . . . . : $build_update_alternatives
+    start-stop-daemon . . . . . . : $build_start_stop_daemon
+    dselect . . . . . . . . . . . : $build_dselect
+
+  System Libraries:
+    libps . . . . . . . . . . . . : ${have_libps:-no}
+    libkvm  . . . . . . . . . . . : ${have_libkvm:-no}
+    libselinux  . . . . . . . . . : $have_libselinux
+    libmd . . . . . . . . . . . . : $have_libmd
+    libz  . . . . . . . . . . . . : $have_libz
+    liblzma . . . . . . . . . . . : $have_liblzma
+    libbz2  . . . . . . . . . . . : $have_libbz2
+    libcurses . . . . . . . . . . : ${have_libcurses:-no}
+CONFIG
diff -Naurp dpkg-1.20.7.1-orig/.dist-version dpkg-1.20.7.1/.dist-version
--- dpkg-1.20.7.1-orig/.dist-version	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/.dist-version	2021-06-09 18:22:47.468275390 -0500
@@ -0,0 +1 @@
+1.20.7.1
diff -Naurp dpkg-1.20.7.1-orig/doc/Doxyfile dpkg-1.20.7.1/doc/Doxyfile
--- dpkg-1.20.7.1-orig/doc/Doxyfile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/doc/Doxyfile	2021-06-09 18:24:51.937468294 -0500
@@ -0,0 +1,2520 @@
+# Doxyfile 1.8.16
+
+# This file describes the settings to be used by the documentation system
+# doxygen (www.doxygen.org) for a project.
+#
+# All text after a double hash (##) is considered a comment and is placed in
+# front of the TAG it is preceding.
+#
+# All text after a single hash (#) is considered a comment and will be ignored.
+# The format is:
+# TAG = value [value, ...]
+# For lists, items can also be appended using:
+# TAG += value [value, ...]
+# Values that contain spaces should be placed between quotes (\" \").
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+
+# This tag specifies the encoding used for all characters in the configuration
+# file that follow. The default is UTF-8 which is also the encoding used for all
+# text before the first occurrence of this tag. Doxygen uses libiconv (or the
+# iconv built into libc) for the transcoding. See
+# https://www.gnu.org/software/libiconv/ for the list of possible encodings.
+# The default value is: UTF-8.
+
+DOXYFILE_ENCODING      = UTF-8
+
+# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
+# double-quotes, unless you are using Doxywizard) that should identify the
+# project for which the documentation is generated. This name is used in the
+# title of most generated pages and in a few other places.
+# The default value is: My Project.
+
+PROJECT_NAME           = dpkg
+
+# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
+# could be handy for archiving the generated documentation or if some version
+# control system is used.
+
+PROJECT_NUMBER         = 1.20.7.1
+
+# Using the PROJECT_BRIEF tag one can provide an optional one line description
+# for a project that appears at the top of each page and should give viewer a
+# quick idea about the purpose of the project. Keep the description short.
+
+PROJECT_BRIEF          =
+
+# With the PROJECT_LOGO tag one can specify a logo or an icon that is included
+# in the documentation. The maximum height of the logo should not exceed 55
+# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy
+# the logo to the output directory.
+
+PROJECT_LOGO           =
+
+# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
+# into which the generated documentation will be written. If a relative path is
+# entered, it will be relative to the location where doxygen was started. If
+# left blank the current directory will be used.
+
+OUTPUT_DIRECTORY       = doc/
+
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# directories (in 2 levels) under the output directory of each output format and
+# will distribute the generated files over these directories. Enabling this
+# option can be useful when feeding doxygen a huge amount of source files, where
+# putting all generated files in the same directory would otherwise causes
+# performance problems for the file system.
+# The default value is: NO.
+
+CREATE_SUBDIRS         = NO
+
+# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
+# characters to appear in the names of generated files. If set to NO, non-ASCII
+# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
+# U+3044.
+# The default value is: NO.
+
+ALLOW_UNICODE_NAMES    = NO
+
+# The OUTPUT_LANGUAGE tag is used to specify the language in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all constant output in the proper language.
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Ukrainian and Vietnamese.
+# The default value is: English.
+
+OUTPUT_LANGUAGE        = English
+
+# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all
+# documentation generated by doxygen is written. Doxygen will use this
+# information to generate all generated output in the proper direction.
+# Possible values are: None, LTR, RTL and Context.
+# The default value is: None.
+
+OUTPUT_TEXT_DIRECTION  = None
+
+# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
+# descriptions after the members that are listed in the file and class
+# documentation (similar to Javadoc). Set to NO to disable this.
+# The default value is: YES.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
+# description of a member or function before the detailed description
+#
+# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
+# brief descriptions will be completely suppressed.
+# The default value is: YES.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator that is
+# used to form the text in various listings. Each string in this list, if found
+# as the leading text of the brief description, will be stripped from the text
+# and the result, after processing the whole list, is used as the annotated
+# text. Otherwise, the brief description is used as-is. If left blank, the
+# following values are used ($name is automatically replaced with the name of
+# the entity):The $name class, The $name widget, The $name file, is, provides,
+# specifies, contains, represents, a, an and the.
+
+ABBREVIATE_BRIEF       =
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
+# doxygen will generate a detailed section even if there is only a brief
+# description.
+# The default value is: NO.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
+# inherited members of a class in the documentation of that class as if those
+# members were ordinary class members. Constructors, destructors and assignment
+# operators of the base classes will not be shown.
+# The default value is: NO.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
+# before files name in the file list and in the header files. If set to NO the
+# shortest path that makes the file name unique will be used
+# The default value is: YES.
+
+FULL_PATH_NAMES        = YES
+
+# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
+# Stripping is only done if one of the specified strings matches the left-hand
+# part of the path. The tag can be used to show relative paths in the file list.
+# If left blank the directory from which doxygen is run is used as the path to
+# strip.
+#
+# Note that you can specify absolute paths here, but also relative paths, which
+# will be relative from the directory where doxygen is started.
+# This tag requires that the tag FULL_PATH_NAMES is set to YES.
+
+STRIP_FROM_PATH        =
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
+# path mentioned in the documentation of a class, which tells the reader which
+# header file to include in order to use a class. If left blank only the name of
+# the header file containing the class definition is used. Otherwise one should
+# specify the list of include paths that are normally passed to the compiler
+# using the -I flag.
+
+STRIP_FROM_INC_PATH    =
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
+# less readable) file names. This can be useful is your file systems doesn't
+# support long names like on DOS, Mac, or CD-ROM.
+# The default value is: NO.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
+# first line (until the first dot) of a Javadoc-style comment as the brief
+# description. If set to NO, the Javadoc-style will behave just like regular Qt-
+# style comments (thus requiring an explicit @brief command for a brief
+# description.)
+# The default value is: NO.
+
+JAVADOC_AUTOBRIEF      = YES
+
+# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line
+# such as
+# /***************
+# as being the beginning of a Javadoc-style comment "banner". If set to NO, the
+# Javadoc-style will behave just like regular comments and it will not be
+# interpreted by doxygen.
+# The default value is: NO.
+
+JAVADOC_BANNER         = NO
+
+# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
+# line (until the first dot) of a Qt-style comment as the brief description. If
+# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
+# requiring an explicit \brief command for a brief description.)
+# The default value is: NO.
+
+QT_AUTOBRIEF           = NO
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
+# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
+# a brief description. This used to be the default behavior. The new default is
+# to treat a multi-line C++ comment block as a detailed description. Set this
+# tag to YES if you prefer the old behavior instead.
+#
+# Note that setting this tag to YES also means that rational rose comments are
+# not recognized any more.
+# The default value is: NO.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
+# documentation from any documented member that it re-implements.
+# The default value is: YES.
+
+INHERIT_DOCS           = YES
+
+# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
+# page for each member. If set to NO, the documentation of a member will be part
+# of the file/class/namespace that contains it.
+# The default value is: NO.
+
+SEPARATE_MEMBER_PAGES  = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
+# uses this value to replace tabs by spaces in code fragments.
+# Minimum value: 1, maximum value: 16, default value: 4.
+
+TAB_SIZE               = 8
+
+# This tag can be used to specify a number of aliases that act as commands in
+# the documentation. An alias has the form:
+# name=value
+# For example adding
+# "sideeffect=@par Side Effects:\n"
+# will allow you to put the command \sideeffect (or @sideeffect) in the
+# documentation, which will result in a user-defined paragraph with heading
+# "Side Effects:". You can put \n's in the value part of an alias to insert
+# newlines (in the resulting output). You can put ^^ in the value part of an
+# alias to insert a newline as if a physical newline was in the original file.
+# When you need a literal { or } or , in the value part of an alias you have to
+# escape them by means of a backslash (\), this can lead to conflicts with the
+# commands \{ and \} for these it is advised to use the version @{ and @} or use
+# a double escape (\\{ and \\})
+
+ALIASES                =
+
+# This tag can be used to specify a number of word-keyword mappings (TCL only).
+# A mapping has the form "name=value". For example adding "class=itcl::class"
+# will allow you to use the command class in the itcl::class meaning.
+
+TCL_SUBST              =
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C. For
+# instance, some of the names that are used will be different. The list of all
+# members will be omitted, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
+# Python sources only. Doxygen will then generate output that is more tailored
+# for that language. For instance, namespaces will be presented as packages,
+# qualified scopes will look different, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
+# sources. Doxygen will then generate output that is tailored for Fortran.
+# The default value is: NO.
+
+OPTIMIZE_FOR_FORTRAN   = NO
+
+# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
+# sources. Doxygen will then generate output that is tailored for VHDL.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_VHDL   = NO
+
+# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice
+# sources only. Doxygen will then generate output that is more tailored for that
+# language. For instance, namespaces will be presented as modules, types will be
+# separated into more groups, etc.
+# The default value is: NO.
+
+OPTIMIZE_OUTPUT_SLICE  = NO
+
+# Doxygen selects the parser to use depending on the extension of the files it
+# parses. With this tag you can assign which parser to use for a given
+# extension. Doxygen has a built-in mapping, but you can override or extend it
+# using this tag. The format is ext=language, where ext is a file extension, and
+# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
+# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice,
+# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran:
+# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser
+# tries to guess whether the code is fixed or free formatted code, this is the
+# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat
+# .inc files as Fortran files (default is PHP), and .f files as C (default is
+# Fortran), use: inc=Fortran f=C.
+#
+# Note: For files without extension you can use no_extension as a placeholder.
+#
+# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
+# the files are not read by doxygen.
+
+EXTENSION_MAPPING      = l=C
+
+# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
+# according to the Markdown format, which allows for more readable
+# documentation. See https://daringfireball.net/projects/markdown/ for details.
+# The output of markdown processing is further processed by doxygen, so you can
+# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
+# case of backward compatibilities issues.
+# The default value is: YES.
+
+MARKDOWN_SUPPORT       = YES
+
+# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up
+# to that level are automatically included in the table of contents, even if
+# they do not have an id attribute.
+# Note: This feature currently applies only to Markdown headings.
+# Minimum value: 0, maximum value: 99, default value: 5.
+# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
+
+TOC_INCLUDE_HEADINGS   = 0
+
+# When enabled doxygen tries to link words that correspond to documented
+# classes, or namespaces to their corresponding documentation. Such a link can
+# be prevented in individual cases by putting a % sign in front of the word or
+# globally by setting AUTOLINK_SUPPORT to NO.
+# The default value is: YES.
+
+AUTOLINK_SUPPORT       = YES
+
+# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
+# to include (a tag file for) the STL sources as input, then you should set this
+# tag to YES in order to let doxygen match functions declarations and
+# definitions whose arguments contain STL classes (e.g. func(std::string);
+# versus func(std::string) {}). This also make the inheritance and collaboration
+# diagrams that involve STL classes more complete and accurate.
+# The default value is: NO.
+
+BUILTIN_STL_SUPPORT    = NO
+
+# If you use Microsoft's C++/CLI language, you should set this option to YES to
+# enable parsing support.
+# The default value is: NO.
+
+CPP_CLI_SUPPORT        = NO
+
+# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
+# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen
+# will parse them like normal C++ but will assume all classes use public instead
+# of private inheritance when no explicit protection keyword is present.
+# The default value is: NO.
+
+SIP_SUPPORT            = NO
+
+# For Microsoft's IDL there are propget and propput attributes to indicate
+# getter and setter methods for a property. Setting this option to YES will make
+# doxygen to replace the get and set methods by a property in the documentation.
+# This will only work if the methods are indeed getting or setting a simple
+# type. If this is not the case, or you want to show the methods anyway, you
+# should set this option to NO.
+# The default value is: YES.
+
+IDL_PROPERTY_SUPPORT   = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
+# tag is set to YES then doxygen will reuse the documentation of the first
+# member in the group (if any) for the other members of the group. By default
+# all members of a group must be documented explicitly.
+# The default value is: NO.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# If one adds a struct or class to a group and this option is enabled, then also
+# any nested class or struct is added to the same group. By default this option
+# is disabled and one has to add nested compounds explicitly via \ingroup.
+# The default value is: NO.
+
+GROUP_NESTED_COMPOUNDS = NO
+
+# Set the SUBGROUPING tag to YES to allow class member groups of the same type
+# (for instance a group of public functions) to be put as a subgroup of that
+# type (e.g. under the Public Functions section). Set it to NO to prevent
+# subgrouping. Alternatively, this can be done per class using the
+# \nosubgrouping command.
+# The default value is: YES.
+
+SUBGROUPING            = YES
+
+# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
+# are shown inside the group in which they are included (e.g. using \ingroup)
+# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
+# and RTF).
+#
+# Note that this feature does not work in combination with
+# SEPARATE_MEMBER_PAGES.
+# The default value is: NO.
+
+INLINE_GROUPED_CLASSES = NO
+
+# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
+# with only public data fields or simple typedef fields will be shown inline in
+# the documentation of the scope in which they are defined (i.e. file,
+# namespace, or group documentation), provided this scope is documented. If set
+# to NO, structs, classes, and unions are shown on a separate page (for HTML and
+# Man pages) or section (for LaTeX and RTF).
+# The default value is: NO.
+
+INLINE_SIMPLE_STRUCTS  = NO
+
+# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
+# enum is documented as struct, union, or enum with the name of the typedef. So
+# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
+# with name TypeT. When disabled the typedef will appear as a member of a file,
+# namespace, or class. And the struct will be named TypeS. This can typically be
+# useful for C code in case the coding convention dictates that all compound
+# types are typedef'ed and only the typedef is referenced, never the tag name.
+# The default value is: NO.
+
+TYPEDEF_HIDES_STRUCT   = NO
+
+# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
+# cache is used to resolve symbols given their name and scope. Since this can be
+# an expensive process and often the same symbol appears multiple times in the
+# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
+# doxygen will become slower. If the cache is too large, memory is wasted. The
+# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
+# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
+# symbols. At the end of a run doxygen will report the cache usage and suggest
+# the optimal cache size from a speed point of view.
+# Minimum value: 0, maximum value: 9, default value: 0.
+
+LOOKUP_CACHE_SIZE      = 0
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
+# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
+# documentation are documented, even if no documentation was available. Private
+# class members and static file members will be hidden unless the
+# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
+# Note: This will also disable the warnings about undocumented members that are
+# normally produced when WARNINGS is set to YES.
+# The default value is: NO.
+
+EXTRACT_ALL            = NO
+
+# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will
+# be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIVATE        = NO
+
+# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual
+# methods of a class will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PRIV_VIRTUAL   = NO
+
+# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal
+# scope will be included in the documentation.
+# The default value is: NO.
+
+EXTRACT_PACKAGE        = NO
+
+# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be
+# included in the documentation.
+# The default value is: NO.
+
+EXTRACT_STATIC         = NO
+
+# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined
+# locally in source files will be included in the documentation. If set to NO,
+# only classes defined in header files are included. Does not have any effect
+# for Java sources.
+# The default value is: YES.
+
+EXTRACT_LOCAL_CLASSES  = YES
+
+# This flag is only useful for Objective-C code. If set to YES, local methods,
+# which are defined in the implementation section but not in the interface are
+# included in the documentation. If set to NO, only methods in the interface are
+# included.
+# The default value is: NO.
+
+EXTRACT_LOCAL_METHODS  = NO
+
+# If this flag is set to YES, the members of anonymous namespaces will be
+# extracted and appear in the documentation as a namespace called
+# 'anonymous_namespace{file}', where file will be replaced with the base name of
+# the file that contains the anonymous namespace. By default anonymous namespace
+# are hidden.
+# The default value is: NO.
+
+EXTRACT_ANON_NSPACES   = NO
+
+# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
+# undocumented members inside documented classes or files. If set to NO these
+# members will be included in the various overviews, but no documentation
+# section is generated. This option has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_MEMBERS     = NO
+
+# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
+# undocumented classes that are normally visible in the class hierarchy. If set
+# to NO, these classes will be included in the various overviews. This option
+# has no effect if EXTRACT_ALL is enabled.
+# The default value is: NO.
+
+HIDE_UNDOC_CLASSES     = NO
+
+# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
+# (class|struct|union) declarations. If set to NO, these declarations will be
+# included in the documentation.
+# The default value is: NO.
+
+HIDE_FRIEND_COMPOUNDS  = NO
+
+# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
+# documentation blocks found inside the body of a function. If set to NO, these
+# blocks will be appended to the function's detailed documentation block.
+# The default value is: NO.
+
+HIDE_IN_BODY_DOCS      = NO
+
+# The INTERNAL_DOCS tag determines if documentation that is typed after a
+# \internal command is included. If the tag is set to NO then the documentation
+# will be excluded. Set it to YES to include the internal documentation.
+# The default value is: NO.
+
+INTERNAL_DOCS          = NO
+
+# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
+# names in lower-case letters. If set to YES, upper-case letters are also
+# allowed. This is useful if you have classes or files whose names only differ
+# in case and if your file system supports case sensitive file names. Windows
+# (including Cygwin) ands Mac users are advised to set this option to NO.
+# The default value is: system dependent.
+
+CASE_SENSE_NAMES       = YES
+
+# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
+# their full class and namespace scopes in the documentation. If set to YES, the
+# scope will be hidden.
+# The default value is: NO.
+
+HIDE_SCOPE_NAMES       = NO
+
+# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
+# append additional text to a page's title, such as Class Reference. If set to
+# YES the compound reference will be hidden.
+# The default value is: NO.
+
+HIDE_COMPOUND_REFERENCE= NO
+
+# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
+# the files that are included by a file in the documentation of that file.
+# The default value is: YES.
+
+SHOW_INCLUDE_FILES     = YES
+
+# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
+# grouped member an include statement to the documentation, telling the reader
+# which file to include in order to use the member.
+# The default value is: NO.
+
+SHOW_GROUPED_MEMB_INC  = NO
+
+# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
+# files with double quotes in the documentation rather than with sharp brackets.
+# The default value is: NO.
+
+FORCE_LOCAL_INCLUDES   = NO
+
+# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
+# documentation for inline members.
+# The default value is: YES.
+
+INLINE_INFO            = YES
+
+# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
+# (detailed) documentation of file and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order.
+# The default value is: YES.
+
+SORT_MEMBER_DOCS       = YES
+
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
+# descriptions of file, namespace and class members alphabetically by member
+# name. If set to NO, the members will appear in declaration order. Note that
+# this will also influence the order of the classes in the class list.
+# The default value is: NO.
+
+SORT_BRIEF_DOCS        = NO
+
+# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
+# (brief and detailed) documentation of class members so that constructors and
+# destructors are listed first. If set to NO the constructors will appear in the
+# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
+# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
+# member documentation.
+# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
+# detailed member documentation.
+# The default value is: NO.
+
+SORT_MEMBERS_CTORS_1ST = NO
+
+# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
+# of group names into alphabetical order. If set to NO the group names will
+# appear in their defined order.
+# The default value is: NO.
+
+SORT_GROUP_NAMES       = NO
+
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
+# fully-qualified names, including namespaces. If set to NO, the class list will
+# be sorted only by class name, not including the namespace part.
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the alphabetical
+# list.
+# The default value is: NO.
+
+SORT_BY_SCOPE_NAME     = NO
+
+# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
+# type resolution of all parameters of a function it will reject a match between
+# the prototype and the implementation of a member function even if there is
+# only one candidate or it is obvious which candidate to choose by doing a
+# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
+# accept a match between prototype and implementation in such cases.
+# The default value is: NO.
+
+STRICT_PROTO_MATCHING  = NO
+
+# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo
+# list. This list is created by putting \todo commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TODOLIST      = YES
+
+# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test
+# list. This list is created by putting \test commands in the documentation.
+# The default value is: YES.
+
+GENERATE_TESTLIST      = YES
+
+# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug
+# list. This list is created by putting \bug commands in the documentation.
+# The default value is: YES.
+
+GENERATE_BUGLIST       = YES
+
+# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO)
+# the deprecated list. This list is created by putting \deprecated commands in
+# the documentation.
+# The default value is: YES.
+
+GENERATE_DEPRECATEDLIST= YES
+
+# The ENABLED_SECTIONS tag can be used to enable conditional documentation
+# sections, marked by \if <section_label> ... \endif and \cond <section_label>
+# ... \endcond blocks.
+
+ENABLED_SECTIONS       =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
+# initial value of a variable or macro / define can have for it to appear in the
+# documentation. If the initializer consists of more lines than specified here
+# it will be hidden. Use a value of 0 to hide initializers completely. The
+# appearance of the value of individual variables and macros / defines can be
+# controlled using \showinitializer or \hideinitializer command in the
+# documentation regardless of this setting.
+# Minimum value: 0, maximum value: 10000, default value: 30.
+
+MAX_INITIALIZER_LINES  = 30
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
+# the bottom of the documentation of classes and structs. If set to YES, the
+# list will mention the files that were used to generate the documentation.
+# The default value is: YES.
+
+SHOW_USED_FILES        = YES
+
+# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
+# will remove the Files entry from the Quick Index and from the Folder Tree View
+# (if specified).
+# The default value is: YES.
+
+SHOW_FILES             = YES
+
+# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
+# page. This will remove the Namespaces entry from the Quick Index and from the
+# Folder Tree View (if specified).
+# The default value is: YES.
+
+SHOW_NAMESPACES        = YES
+
+# The FILE_VERSION_FILTER tag can be used to specify a program or script that
+# doxygen should invoke to get the current version for each file (typically from
+# the version control system). Doxygen will invoke the program by executing (via
+# popen()) the command command input-file, where command is the value of the
+# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
+# by doxygen. Whatever the program writes to standard output is used as the file
+# version. For an example see the documentation.
+
+FILE_VERSION_FILTER    = "git log -n 1 --pretty=format:%h --"
+
+# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
+# by doxygen. The layout file controls the global structure of the generated
+# output files in an output format independent way. To create the layout file
+# that represents doxygen's defaults, run doxygen with the -l option. You can
+# optionally specify a file name after the option, if omitted DoxygenLayout.xml
+# will be used as the name of the layout file.
+#
+# Note that if you run doxygen from a directory containing a file called
+# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
+# tag is left empty.
+
+LAYOUT_FILE            =
+
+# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
+# the reference definitions. This must be a list of .bib files. The .bib
+# extension is automatically appended if omitted. This requires the bibtex tool
+# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info.
+# For LaTeX the style of the bibliography can be controlled using
+# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
+# search path. See also \cite for info how to create references.
+
+CITE_BIB_FILES         =
+
+#---------------------------------------------------------------------------
+# Configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+
+# The QUIET tag can be used to turn on/off the messages that are generated to
+# standard output by doxygen. If QUIET is set to YES this implies that the
+# messages are off.
+# The default value is: NO.
+
+QUIET                  = YES
+
+# The WARNINGS tag can be used to turn on/off the warning messages that are
+# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
+# this implies that the warnings are on.
+#
+# Tip: Turn warnings on while writing the documentation.
+# The default value is: YES.
+
+WARNINGS               = YES
+
+# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
+# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: YES.
+
+WARN_IF_UNDOCUMENTED   = YES
+
+# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
+# potential errors in the documentation, such as not documenting some parameters
+# in a documented function, or documenting parameters that don't exist or using
+# markup commands wrongly.
+# The default value is: YES.
+
+WARN_IF_DOC_ERROR      = YES
+
+# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
+# are documented, but have no documentation for their parameters or return
+# value. If set to NO, doxygen will only warn about wrong or incomplete
+# parameter documentation, but not about the absence of documentation. If
+# EXTRACT_ALL is set to YES then this flag will automatically be disabled.
+# The default value is: NO.
+
+WARN_NO_PARAMDOC       = NO
+
+# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
+# a warning is encountered.
+# The default value is: NO.
+
+WARN_AS_ERROR          = NO
+
+# The WARN_FORMAT tag determines the format of the warning messages that doxygen
+# can produce. The string should contain the $file, $line, and $text tags, which
+# will be replaced by the file and line number from which the warning originated
+# and the warning text. Optionally the format may contain $version, which will
+# be replaced by the version of the file (if it could be obtained via
+# FILE_VERSION_FILTER)
+# The default value is: $file:$line: $text.
+
+WARN_FORMAT            = "$file:$line: $text"
+
+# The WARN_LOGFILE tag can be used to specify a file to which warning and error
+# messages should be written. If left blank the output is written to standard
+# error (stderr).
+
+WARN_LOGFILE           =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the input files
+#---------------------------------------------------------------------------
+
+# The INPUT tag is used to specify the files and/or directories that contain
+# documented source files. You may enter file names like myfile.cpp or
+# directories like /usr/src/myproject. Separate the files or directories with
+# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING
+# Note: If this tag is empty the current directory is searched.
+
+INPUT                  = lib/dpkg \
+                         dpkg-deb \
+                         dpkg-split \
+                         src \
+                         utils
+
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
+# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
+# documentation (see: https://www.gnu.org/software/libiconv/) for the list of
+# possible encodings.
+# The default value is: UTF-8.
+
+INPUT_ENCODING         = UTF-8
+
+# If the value of the INPUT tag contains directories, you can use the
+# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
+# *.h) to filter out the source-files in the directories.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# read by doxygen.
+#
+# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
+# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
+# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc,
+# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
+# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice.
+
+FILE_PATTERNS          = *.c \
+                         *.h
+
+# The RECURSIVE tag can be used to specify whether or not subdirectories should
+# be searched for input files as well.
+# The default value is: NO.
+
+RECURSIVE              = YES
+
+# The EXCLUDE tag can be used to specify files and/or directories that should be
+# excluded from the INPUT source files. This way you can easily exclude a
+# subdirectory from a directory tree whose root is specified with the INPUT tag.
+#
+# Note that relative paths are relative to the directory from which doxygen is
+# run.
+
+EXCLUDE                =
+
+# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
+# directories that are symbolic links (a Unix file system feature) are excluded
+# from the input.
+# The default value is: NO.
+
+EXCLUDE_SYMLINKS       = NO
+
+# If the value of the INPUT tag contains directories, you can use the
+# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
+# certain files from those directories.
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories for example use the pattern */test/*
+
+EXCLUDE_PATTERNS       = */t/*
+
+# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
+# (namespaces, classes, functions, etc.) that should be excluded from the
+# output. The symbol name can be a fully qualified name, a word, or if the
+# wildcard * is used, a substring. Examples: ANamespace, AClass,
+# AClass::ANamespace, ANamespace::*Test
+#
+# Note that the wildcards are matched against the file with absolute path, so to
+# exclude all test directories use the pattern */test/*
+
+EXCLUDE_SYMBOLS        =
+
+# The EXAMPLE_PATH tag can be used to specify one or more files or directories
+# that contain example code fragments that are included (see the \include
+# command).
+
+EXAMPLE_PATH           =
+
+# If the value of the EXAMPLE_PATH tag contains directories, you can use the
+# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
+# *.h) to filter out the source-files in the directories. If left blank all
+# files are included.
+
+EXAMPLE_PATTERNS       =
+
+# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
+# searched for input files to be used with the \include or \dontinclude commands
+# irrespective of the value of the RECURSIVE tag.
+# The default value is: NO.
+
+EXAMPLE_RECURSIVE      = NO
+
+# The IMAGE_PATH tag can be used to specify one or more files or directories
+# that contain images that are to be included in the documentation (see the
+# \image command).
+
+IMAGE_PATH             =
+
+# The INPUT_FILTER tag can be used to specify a program that doxygen should
+# invoke to filter for each input file. Doxygen will invoke the filter program
+# by executing (via popen()) the command:
+#
+# <filter> <input-file>
+#
+# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
+# name of an input file. Doxygen will then use the output that the filter
+# program writes to standard output. If FILTER_PATTERNS is specified, this tag
+# will be ignored.
+#
+# Note that the filter must not add or remove lines; it is applied before the
+# code is scanned, but not when the output code is generated. If lines are added
+# or removed, the anchors will not be placed correctly.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# properly processed by doxygen.
+
+INPUT_FILTER           =
+
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
+# basis. Doxygen will compare the file name with each pattern and apply the
+# filter if there is a match. The filters are a list of the form: pattern=filter
+# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
+# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
+# patterns match the file name, INPUT_FILTER is applied.
+#
+# Note that for custom extensions or not directly supported extensions you also
+# need to set EXTENSION_MAPPING for the extension otherwise the files are not
+# properly processed by doxygen.
+
+FILTER_PATTERNS        =
+
+# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
+# INPUT_FILTER) will also be used to filter the input files that are used for
+# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
+# The default value is: NO.
+
+FILTER_SOURCE_FILES    = NO
+
+# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
+# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
+# it is also possible to disable source filtering for a specific pattern using
+# *.ext= (so without naming a filter).
+# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
+
+FILTER_SOURCE_PATTERNS =
+
+# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
+# is part of the input, its contents will be placed on the main page
+# (index.html). This can be useful if you have a project on for instance GitHub
+# and want to reuse the introduction page also for the doxygen output.
+
+USE_MDFILE_AS_MAINPAGE =
+
+#---------------------------------------------------------------------------
+# Configuration options related to source browsing
+#---------------------------------------------------------------------------
+
+# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
+# generated. Documented entities will be cross-referenced with these sources.
+#
+# Note: To get rid of all source code in the generated output, make sure that
+# also VERBATIM_HEADERS is set to NO.
+# The default value is: NO.
+
+SOURCE_BROWSER         = NO
+
+# Setting the INLINE_SOURCES tag to YES will include the body of functions,
+# classes and enums directly into the documentation.
+# The default value is: NO.
+
+INLINE_SOURCES         = NO
+
+# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
+# special comment blocks from generated source code fragments. Normal C, C++ and
+# Fortran comments will always remain visible.
+# The default value is: YES.
+
+STRIP_CODE_COMMENTS    = YES
+
+# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
+# entity all documented functions referencing it will be listed.
+# The default value is: NO.
+
+REFERENCED_BY_RELATION = NO
+
+# If the REFERENCES_RELATION tag is set to YES then for each documented function
+# all documented entities called/used by that function will be listed.
+# The default value is: NO.
+
+REFERENCES_RELATION    = NO
+
+# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
+# to YES then the hyperlinks from functions in REFERENCES_RELATION and
+# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
+# link to the documentation.
+# The default value is: YES.
+
+REFERENCES_LINK_SOURCE = YES
+
+# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
+# source code will show a tooltip with additional information such as prototype,
+# brief description and links to the definition and documentation. Since this
+# will make the HTML file larger and loading of large files a bit slower, you
+# can opt to disable this feature.
+# The default value is: YES.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+SOURCE_TOOLTIPS        = YES
+
+# If the USE_HTAGS tag is set to YES then the references to source code will
+# point to the HTML generated by the htags(1) tool instead of doxygen built-in
+# source browser. The htags tool is part of GNU's global source tagging system
+# (see https://www.gnu.org/software/global/global.html). You will need version
+# 4.8.6 or higher.
+#
+# To use it do the following:
+# - Install the latest version of global
+# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file
+# - Make sure the INPUT points to the root of the source tree
+# - Run doxygen as normal
+#
+# Doxygen will invoke htags (and that will in turn invoke gtags), so these
+# tools must be available from the command line (i.e. in the search path).
+#
+# The result: instead of the source browser generated by doxygen, the links to
+# source code will now point to the output of htags.
+# The default value is: NO.
+# This tag requires that the tag SOURCE_BROWSER is set to YES.
+
+USE_HTAGS              = NO
+
+# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
+# verbatim copy of the header file for each class for which an include is
+# specified. Set to NO to disable this.
+# See also: Section \class.
+# The default value is: YES.
+
+VERBATIM_HEADERS       = YES
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
+# cost of reduced performance. This can be particularly helpful with template
+# rich C++ code for which doxygen's built-in parser lacks the necessary type
+# information.
+# Note: The availability of this option depends on whether or not doxygen was
+# generated with the -Duse_libclang=ON option for CMake.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+# If clang assisted parsing is enabled you can provide the clang parser with the
+# path to the compilation database (see:
+# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files
+# were built. This is equivalent to specifying the "-p" option to a clang tool,
+# such as clang-check. These options will then be passed to the parser.
+# Note: The availability of this option depends on whether or not doxygen was
+# generated with the -Duse_libclang=ON option for CMake.
+
+CLANG_DATABASE_PATH    =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+
+# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
+# compounds will be generated. Enable this if the project contains a lot of
+# classes, structs, unions or interfaces.
+# The default value is: YES.
+
+ALPHABETICAL_INDEX     = NO
+
+# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
+# which the alphabetical index list will be split.
+# Minimum value: 1, maximum value: 20, default value: 5.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+COLS_IN_ALPHA_INDEX    = 5
+
+# In case all classes in a project start with a common prefix, all classes will
+# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# while generating the index headers.
+# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
+
+IGNORE_PREFIX          =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the HTML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
+# The default value is: YES.
+
+GENERATE_HTML          = YES
+
+# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_OUTPUT            = html
+
+# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
+# generated HTML page (for example: .htm, .php, .asp).
+# The default value is: .html.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FILE_EXTENSION    = .html
+
+# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
+# each generated HTML page. If the tag is left blank doxygen will generate a
+# standard header.
+#
+# To get valid HTML the header file that includes any scripts and style sheets
+# that doxygen needs, which is dependent on the configuration options used (e.g.
+# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
+# default header using
+# doxygen -w html new_header.html new_footer.html new_stylesheet.css
+# YourConfigFile
+# and then modify the file new_header.html. See also section "Doxygen usage"
+# for information on how to generate the default header that doxygen normally
+# uses.
+# Note: The header is subject to change so you typically have to regenerate the
+# default header when upgrading to a newer version of doxygen. For a description
+# of the possible markers and block names see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_HEADER            =
+
+# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
+# generated HTML page. If the tag is left blank doxygen will generate a standard
+# footer. See HTML_HEADER for more information on how to generate a default
+# footer and what special commands can be used inside the footer. See also
+# section "Doxygen usage" for information on how to generate the default footer
+# that doxygen normally uses.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_FOOTER            =
+
+# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
+# sheet that is used by each HTML page. It can be used to fine-tune the look of
+# the HTML output. If left blank doxygen will generate a default style sheet.
+# See also section "Doxygen usage" for information on how to generate the style
+# sheet that doxygen normally uses.
+# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
+# it is more robust and this tag (HTML_STYLESHEET) will in the future become
+# obsolete.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_STYLESHEET        =
+
+# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# cascading style sheets that are included after the standard style sheets
+# created by doxygen. Using this option one can overrule certain style aspects.
+# This is preferred over using HTML_STYLESHEET since it does not replace the
+# standard style sheet and is therefore more robust against future updates.
+# Doxygen will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list). For an example see the documentation.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_STYLESHEET  =
+
+# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the HTML output directory. Note
+# that these files will be copied to the base HTML output directory. Use the
+# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
+# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
+# files will be copied as-is; there are no commands or markers available.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_EXTRA_FILES       =
+
+# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
+# will adjust the colors in the style sheet and background images according to
+# this color. Hue is specified as an angle on a colorwheel, see
+# https://en.wikipedia.org/wiki/Hue for more information. For instance the value
+# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
+# purple, and 360 is red again.
+# Minimum value: 0, maximum value: 359, default value: 220.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_HUE    = 220
+
+# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
+# in the HTML output. For a value of 0 the output will use grayscales only. A
+# value of 255 will produce the most vivid colors.
+# Minimum value: 0, maximum value: 255, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_SAT    = 100
+
+# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
+# luminance component of the colors in the HTML output. Values below 100
+# gradually make the output lighter, whereas values above 100 make the output
+# darker. The value divided by 100 is the actual gamma applied, so 80 represents
+# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
+# change the gamma.
+# Minimum value: 40, maximum value: 240, default value: 80.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE_GAMMA  = 80
+
+# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
+# page will contain the date and time when the page was generated. Setting this
+# to YES can help to show when doxygen was last run and thus if the
+# documentation is up to date.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_TIMESTAMP         = NO
+
+# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
+# documentation will contain a main index with vertical navigation menus that
+# are dynamically created via Javascript. If disabled, the navigation index will
+# consists of multiple levels of tabs that are statically embedded in every HTML
+# page. Disable this option to support browsers that do not have Javascript,
+# like the Qt help browser.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_MENUS     = YES
+
+# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
+# documentation will contain sections that can be hidden and shown after the
+# page has loaded.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_DYNAMIC_SECTIONS  = NO
+
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
+# shown in the various tree structured indices initially; the user can expand
+# and collapse entries dynamically later on. Doxygen will expand the tree to
+# such a level that at most the specified number of entries are visible (unless
+# a fully collapsed tree already exceeds this amount). So setting the number of
+# entries 1 will produce a full collapsed tree by default. 0 is a special value
+# representing an infinite number of entries and will result in a full expanded
+# tree by default.
+# Minimum value: 0, maximum value: 9999, default value: 100.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
+# If the GENERATE_DOCSET tag is set to YES, additional index files will be
+# generated that can be used as input for Apple's Xcode 3 integrated development
+# environment (see: https://developer.apple.com/xcode/), introduced with OSX
+# 10.5 (Leopard). To create a documentation set, doxygen will generate a
+# Makefile in the HTML output directory. Running make will produce the docset in
+# that directory and running make install will install the docset in
+# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
+# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy
+# genXcode/_index.html for more information.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_DOCSET        = NO
+
+# This tag determines the name of the docset feed. A documentation feed provides
+# an umbrella under which multiple documentation sets from a single provider
+# (such as a company or product suite) can be grouped.
+# The default value is: Doxygen generated docs.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_FEEDNAME        = "Doxygen generated docs"
+
+# This tag specifies a string that should uniquely identify the documentation
+# set bundle. This should be a reverse domain-name style string, e.g.
+# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_BUNDLE_ID       = org.doxygen.Project
+
+# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
+# the documentation publisher. This should be a reverse domain-name style
+# string, e.g. com.mycompany.MyDocSet.documentation.
+# The default value is: org.doxygen.Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
+
+# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
+# The default value is: Publisher.
+# This tag requires that the tag GENERATE_DOCSET is set to YES.
+
+DOCSET_PUBLISHER_NAME  = Publisher
+
+# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
+# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
+# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
+# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on
+# Windows.
+#
+# The HTML Help Workshop contains a compiler that can convert all HTML output
+# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
+# files are now used as the Windows 98 help format, and will replace the old
+# Windows help format (.hlp) on all Windows platforms in the future. Compressed
+# HTML files also contain an index, a table of contents, and you can search for
+# words in the documentation. The HTML workshop also contains a viewer for
+# compressed HTML files.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_HTMLHELP      = NO
+
+# The CHM_FILE tag can be used to specify the file name of the resulting .chm
+# file. You can add a path in front of the file if the result should not be
+# written to the html output directory.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_FILE               =
+
+# The HHC_LOCATION tag can be used to specify the location (absolute path
+# including file name) of the HTML help compiler (hhc.exe). If non-empty,
+# doxygen will try to run the HTML help compiler on the generated index.hhp.
+# The file has to be specified with full path.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+HHC_LOCATION           =
+
+# The GENERATE_CHI flag controls if a separate .chi index file is generated
+# (YES) or that it should be included in the master .chm file (NO).
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+GENERATE_CHI           = NO
+
+# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc)
+# and project file content.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+CHM_INDEX_ENCODING     =
+
+# The BINARY_TOC flag controls whether a binary table of contents is generated
+# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it
+# enables the Previous and Next buttons.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+BINARY_TOC             = NO
+
+# The TOC_EXPAND flag can be set to YES to add extra items for group members to
+# the table of contents of the HTML help documentation and to the tree view.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
+
+TOC_EXPAND             = NO
+
+# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
+# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
+# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
+# (.qch) of the generated HTML documentation.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_QHP           = NO
+
+# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
+# the file name of the resulting .qch file. The path specified is relative to
+# the HTML output folder.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QCH_FILE               =
+
+# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
+# Project output. For more information please see Qt Help Project / Namespace
+# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace).
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_NAMESPACE          =
+
+# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
+# Help Project output. For more information please see Qt Help Project / Virtual
+# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-
+# folders).
+# The default value is: doc.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_VIRTUAL_FOLDER     = doc
+
+# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
+# filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_NAME   =
+
+# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
+# custom filter to add. For more information please see Qt Help Project / Custom
+# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-
+# filters).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_CUST_FILTER_ATTRS  =
+
+# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
+# project's filter section matches. Qt Help Project / Filter Attributes (see:
+# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes).
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHP_SECT_FILTER_ATTRS  =
+
+# The QHG_LOCATION tag can be used to specify the location of Qt's
+# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
+# generated .qhp file.
+# This tag requires that the tag GENERATE_QHP is set to YES.
+
+QHG_LOCATION           =
+
+# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
+# generated, together with the HTML files, they form an Eclipse help plugin. To
+# install this plugin and make it available under the help contents menu in
+# Eclipse, the contents of the directory containing the HTML and XML files needs
+# to be copied into the plugins directory of eclipse. The name of the directory
+# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
+# After copying Eclipse needs to be restarted before the help appears.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_ECLIPSEHELP   = NO
+
+# A unique identifier for the Eclipse help plugin. When installing the plugin
+# the directory name containing the HTML and XML files should also have this
+# name. Each documentation set should have its own identifier.
+# The default value is: org.doxygen.Project.
+# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
+
+ECLIPSE_DOC_ID         = org.doxygen.Project
+
+# If you want full control over the layout of the generated HTML pages it might
+# be necessary to disable the index and replace it with your own. The
+# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
+# of each HTML page. A value of NO enables the index and the value YES disables
+# it. Since the tabs in the index contain the same information as the navigation
+# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+DISABLE_INDEX          = NO
+
+# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
+# structure should be generated to display hierarchical information. If the tag
+# value is set to YES, a side panel will be generated containing a tree-like
+# index structure (just like the one that is generated for HTML Help). For this
+# to work a browser that supports JavaScript, DHTML, CSS and frames is required
+# (i.e. any modern browser). Windows users are probably better off using the
+# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can
+# further fine-tune the look of the index. As an example, the default style
+# sheet generated by doxygen has an example that shows how to put an image at
+# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
+# the same information as the tab index, you could consider setting
+# DISABLE_INDEX to YES when enabling this option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+GENERATE_TREEVIEW      = NO
+
+# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
+# doxygen will group on one line in the generated HTML documentation.
+#
+# Note that a value of 0 will completely suppress the enum values from appearing
+# in the overview section.
+# Minimum value: 0, maximum value: 20, default value: 4.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+ENUM_VALUES_PER_LINE   = 4
+
+# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
+# to set the initial width (in pixels) of the frame in which the tree is shown.
+# Minimum value: 0, maximum value: 1500, default value: 250.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+TREEVIEW_WIDTH         = 250
+
+# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
+# external symbols imported via tag files in a separate window.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+EXT_LINKS_IN_WINDOW    = NO
+
+# Use this tag to change the font size of LaTeX formulas included as images in
+# the HTML documentation. When you change the font size after a successful
+# doxygen run you need to manually remove any form_*.png images from the HTML
+# output directory to force them to be regenerated.
+# Minimum value: 8, maximum value: 50, default value: 10.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_FONTSIZE       = 10
+
+# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
+# generated for formulas are transparent PNGs. Transparent PNGs are not
+# supported properly for IE 6.0, but are supported on all modern browsers.
+#
+# Note that when changing this option you need to delete any form_*.png files in
+# the HTML output directory before the changes have effect.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+FORMULA_TRANSPARENT    = YES
+
+# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
+# https://www.mathjax.org) which uses client side Javascript for the rendering
+# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX
+# installed or if you want to formulas look prettier in the HTML output. When
+# enabled you may also need to install MathJax separately and configure the path
+# to it using the MATHJAX_RELPATH option.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+USE_MATHJAX            = NO
+
+# When MathJax is enabled you can set the default output format to be used for
+# the MathJax output. See the MathJax site (see:
+# http://docs.mathjax.org/en/latest/output.html) for more details.
+# Possible values are: HTML-CSS (which is slower, but has the best
+# compatibility), NativeMML (i.e. MathML) and SVG.
+# The default value is: HTML-CSS.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_FORMAT         = HTML-CSS
+
+# When MathJax is enabled you need to specify the location relative to the HTML
+# output directory using the MATHJAX_RELPATH option. The destination directory
+# should contain the MathJax.js script. For instance, if the mathjax directory
+# is located at the same level as the HTML output directory, then
+# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
+# Content Delivery Network so you can quickly see the result without installing
+# MathJax. However, it is strongly recommended to install a local copy of
+# MathJax from https://www.mathjax.org before deployment.
+# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
+
+# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
+# extension names that should be enabled during MathJax rendering. For example
+# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_EXTENSIONS     =
+
+# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
+# of code that will be used on startup of the MathJax code. See the MathJax site
+# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
+# example see the documentation.
+# This tag requires that the tag USE_MATHJAX is set to YES.
+
+MATHJAX_CODEFILE       =
+
+# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
+# the HTML output. The underlying search engine uses javascript and DHTML and
+# should work on any modern browser. Note that when using HTML help
+# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
+# there is already a search function so this one should typically be disabled.
+# For large projects the javascript based search engine can be slow, then
+# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
+# search using the keyboard; to jump to the search box use <access key> + S
+# (what the <access key> is depends on the OS and browser, but it is typically
+# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
+# key> to jump into the search results window, the results can be navigated
+# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
+# the search. The filter options can be selected when the cursor is inside the
+# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
+# to select a filter and <Enter> or <escape> to activate or cancel the filter
+# option.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SEARCHENGINE           = YES
+
+# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
+# implemented using a web server instead of a web client using Javascript. There
+# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
+# setting. When disabled, doxygen will generate a PHP script for searching and
+# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
+# and searching needs to be provided by external tools. See the section
+# "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SERVER_BASED_SEARCH    = NO
+
+# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
+# script for searching. Instead the search results are written to an XML file
+# which needs to be processed by an external indexer. Doxygen will invoke an
+# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
+# search results.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: https://xapian.org/).
+#
+# See the section "External Indexing and Searching" for details.
+# The default value is: NO.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH        = NO
+
+# The SEARCHENGINE_URL should point to a search engine hosted by a web server
+# which will return the search results when EXTERNAL_SEARCH is enabled.
+#
+# Doxygen ships with an example indexer (doxyindexer) and search engine
+# (doxysearch.cgi) which are based on the open source search engine library
+# Xapian (see: https://xapian.org/). See the section "External Indexing and
+# Searching" for details.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHENGINE_URL       =
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
+# search data is written to a file for indexing by an external tool. With the
+# SEARCHDATA_FILE tag the name of this file can be specified.
+# The default file is: searchdata.xml.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+SEARCHDATA_FILE        = searchdata.xml
+
+# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
+# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
+# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
+# projects and redirect the results back to the right project.
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTERNAL_SEARCH_ID     =
+
+# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
+# projects other than the one defined by this configuration file, but that are
+# all added to the same external search index. Each project needs to have a
+# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
+# to a relative location where the documentation can be found. The format is:
+# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
+# This tag requires that the tag SEARCHENGINE is set to YES.
+
+EXTRA_SEARCH_MAPPINGS  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
+# The default value is: YES.
+
+GENERATE_LATEX         = NO
+
+# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: latex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_OUTPUT           = latex
+
+# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
+# invoked.
+#
+# Note that when not enabling USE_PDFLATEX the default is latex when enabling
+# USE_PDFLATEX the default is pdflatex and when in the later case latex is
+# chosen this is overwritten by pdflatex. For specific output languages the
+# default can have been set differently, this depends on the implementation of
+# the output language.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_CMD_NAME         = latex
+
+# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
+# index for LaTeX.
+# Note: This tag is used in the Makefile / make.bat.
+# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file
+# (.tex).
+# The default file is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+MAKEINDEX_CMD_NAME     = makeindex
+
+# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to
+# generate index for LaTeX. In case there is no backslash (\) as first character
+# it will be automatically added in the LaTeX code.
+# Note: This tag is used in the generated output file (.tex).
+# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat.
+# The default value is: makeindex.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_MAKEINDEX_CMD    = makeindex
+
+# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+COMPACT_LATEX          = NO
+
+# The PAPER_TYPE tag can be used to set the paper type that is used by the
+# printer.
+# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
+# 14 inches) and executive (7.25 x 10.5 inches).
+# The default value is: a4.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PAPER_TYPE             = a4wide
+
+# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
+# that should be included in the LaTeX output. The package can be specified just
+# by its name or with the correct syntax as to be used with the LaTeX
+# \usepackage command. To get the times font for instance you can specify :
+# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times}
+# To use the option intlimits with the amsmath package you can specify:
+# EXTRA_PACKAGES=[intlimits]{amsmath}
+# If left blank no extra packages will be included.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+EXTRA_PACKAGES         =
+
+# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
+# generated LaTeX document. The header should contain everything until the first
+# chapter. If it is left blank doxygen will generate a standard header. See
+# section "Doxygen usage" for information on how to let doxygen write the
+# default header to a separate file.
+#
+# Note: Only use a user-defined header if you know what you are doing! The
+# following commands have a special meaning inside the header: $title,
+# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
+# $projectbrief, $projectlogo. Doxygen will replace $title with the empty
+# string, for the replacement values of the other commands the user is referred
+# to HTML_HEADER.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HEADER           =
+
+# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
+# generated LaTeX document. The footer should contain everything after the last
+# chapter. If it is left blank doxygen will generate a standard footer. See
+# LATEX_HEADER for more information on how to generate a default footer and what
+# special commands can be used inside the footer.
+#
+# Note: Only use a user-defined footer if you know what you are doing!
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_FOOTER           =
+
+# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined
+# LaTeX style sheets that are included after the standard style sheets created
+# by doxygen. Using this option one can overrule certain style aspects. Doxygen
+# will copy the style sheet files to the output directory.
+# Note: The order of the extra style sheet files is of importance (e.g. the last
+# style sheet in the list overrules the setting of the previous ones in the
+# list).
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_STYLESHEET =
+
+# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
+# other source files which should be copied to the LATEX_OUTPUT output
+# directory. Note that the files will be copied as-is; there are no commands or
+# markers available.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EXTRA_FILES      =
+
+# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
+# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
+# contain links (just like the HTML output) instead of page references. This
+# makes the output suitable for online browsing using a PDF viewer.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+PDF_HYPERLINKS         = YES
+
+# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
+# the PDF file directly from the LaTeX files. Set this option to YES, to get a
+# higher quality PDF documentation.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+USE_PDFLATEX           = YES
+
+# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# if errors occur, instead of asking the user for help. This option is also used
+# when generating formulas in HTML.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BATCHMODE        = NO
+
+# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
+# index chapters (such as File Index, Compound Index, etc.) in the output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_HIDE_INDICES     = NO
+
+# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
+# code with syntax highlighting in the LaTeX output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_SOURCE_CODE      = NO
+
+# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
+# bibliography, e.g. plainnat, or ieeetr. See
+# https://en.wikipedia.org/wiki/BibTeX and \cite for more info.
+# The default value is: plain.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_BIB_STYLE        = plain
+
+# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
+# page will contain the date and time when the page was generated. Setting this
+# to NO can help when comparing the output of multiple runs.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_TIMESTAMP        = NO
+
+# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute)
+# path from which the emoji images will be read. If a relative path is entered,
+# it will be relative to the LATEX_OUTPUT directory. If left blank the
+# LATEX_OUTPUT directory will be used.
+# This tag requires that the tag GENERATE_LATEX is set to YES.
+
+LATEX_EMOJI_DIRECTORY  =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the RTF output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
+# RTF output is optimized for Word 97 and may not look too pretty with other RTF
+# readers/editors.
+# The default value is: NO.
+
+GENERATE_RTF           = NO
+
+# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: rtf.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_OUTPUT             = rtf
+
+# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
+# documents. This may be useful for small projects and may help to save some
+# trees in general.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+COMPACT_RTF            = NO
+
+# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
+# contain hyperlink fields. The RTF file will contain links (just like the HTML
+# output) instead of page references. This makes the output suitable for online
+# browsing using Word or some other Word compatible readers that support those
+# fields.
+#
+# Note: WordPad (write) and others do not support links.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_HYPERLINKS         = NO
+
+# Load stylesheet definitions from file. Syntax is similar to doxygen's
+# configuration file, i.e. a series of assignments. You only have to provide
+# replacements, missing definitions are set to their default value.
+#
+# See also section "Doxygen usage" for information on how to generate the
+# default style sheet that doxygen normally uses.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_STYLESHEET_FILE    =
+
+# Set optional variables used in the generation of an RTF document. Syntax is
+# similar to doxygen's configuration file. A template extensions file can be
+# generated using doxygen -e rtf extensionFile.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_EXTENSIONS_FILE    =
+
+# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code
+# with syntax highlighting in the RTF output.
+#
+# Note that which sources are shown also depends on other settings such as
+# SOURCE_BROWSER.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_RTF is set to YES.
+
+RTF_SOURCE_CODE        = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the man page output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
+# classes and files.
+# The default value is: NO.
+
+GENERATE_MAN           = NO
+
+# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it. A directory man3 will be created inside the directory specified by
+# MAN_OUTPUT.
+# The default directory is: man.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_OUTPUT             = man
+
+# The MAN_EXTENSION tag determines the extension that is added to the generated
+# man pages. In case the manual section does not start with a number, the number
+# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
+# optional.
+# The default value is: .3.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_EXTENSION          = .3
+
+# The MAN_SUBDIR tag determines the name of the directory created within
+# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
+# MAN_EXTENSION with the initial . removed.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_SUBDIR             =
+
+# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
+# will generate one additional man file for each entity documented in the real
+# man page(s). These additional files only source the real man page, but without
+# them the man command would be unable to find the correct page.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_MAN is set to YES.
+
+MAN_LINKS              = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the XML output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
+# captures the structure of the code including all documentation.
+# The default value is: NO.
+
+GENERATE_XML           = NO
+
+# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
+# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
+# it.
+# The default directory is: xml.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_OUTPUT             = xml
+
+# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
+# listings (including syntax highlighting and cross-referencing information) to
+# the XML output. Note that enabling this will significantly increase the size
+# of the XML output.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_PROGRAMLISTING     = YES
+
+# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include
+# namespace members in file scope as well, matching the HTML output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_XML is set to YES.
+
+XML_NS_MEMB_FILE_SCOPE = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the DOCBOOK output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
+# that can be used to generate PDF.
+# The default value is: NO.
+
+GENERATE_DOCBOOK       = NO
+
+# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
+# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
+# front of it.
+# The default directory is: docbook.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_OUTPUT         = docbook
+
+# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the
+# program listings (including syntax highlighting and cross-referencing
+# information) to the DOCBOOK output. Note that enabling this will significantly
+# increase the size of the DOCBOOK output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
+
+DOCBOOK_PROGRAMLISTING = NO
+
+#---------------------------------------------------------------------------
+# Configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
+# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# the structure of the code including all documentation. Note that this feature
+# is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_AUTOGEN_DEF   = NO
+
+#---------------------------------------------------------------------------
+# Configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
+# file that captures the structure of the code including all documentation.
+#
+# Note that this feature is still experimental and incomplete at the moment.
+# The default value is: NO.
+
+GENERATE_PERLMOD       = NO
+
+# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
+# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
+# output from the Perl module output.
+# The default value is: NO.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_LATEX          = NO
+
+# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely
+# formatted so it can be parsed by a human reader. This is useful if you want to
+# understand what is going on. On the other hand, if this tag is set to NO, the
+# size of the Perl module output will be much smaller and Perl will parse it
+# just the same.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_PRETTY         = YES
+
+# The names of the make variables in the generated doxyrules.make file are
+# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
+# so different doxyrules.make files included by the same Makefile don't
+# overwrite each other's variables.
+# This tag requires that the tag GENERATE_PERLMOD is set to YES.
+
+PERLMOD_MAKEVAR_PREFIX =
+
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor
+#---------------------------------------------------------------------------
+
+# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
+# C-preprocessor directives found in the sources and include files.
+# The default value is: YES.
+
+ENABLE_PREPROCESSING   = YES
+
+# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
+# in the source code. If set to NO, only conditional compilation will be
+# performed. Macro expansion can be done in a controlled way by setting
+# EXPAND_ONLY_PREDEF to YES.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+MACRO_EXPANSION        = NO
+
+# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
+# the macro expansion is limited to the macros specified with the PREDEFINED and
+# EXPAND_AS_DEFINED tags.
+# The default value is: NO.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_ONLY_PREDEF     = NO
+
+# If the SEARCH_INCLUDES tag is set to YES, the include files in the
+# INCLUDE_PATH will be searched if a #include is found.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SEARCH_INCLUDES        = YES
+
+# The INCLUDE_PATH tag can be used to specify one or more directories that
+# contain include files that are not input files but should be processed by the
+# preprocessor.
+# This tag requires that the tag SEARCH_INCLUDES is set to YES.
+
+INCLUDE_PATH           =
+
+# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
+# patterns (like *.h and *.hpp) to filter out the header-files in the
+# directories. If left blank, the patterns specified with FILE_PATTERNS will be
+# used.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+INCLUDE_FILE_PATTERNS  =
+
+# The PREDEFINED tag can be used to specify one or more macro names that are
+# defined before the preprocessor is started (similar to the -D option of e.g.
+# gcc). The argument of the tag is a list of macros of the form: name or
+# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
+# is assumed. To prevent a macro definition from being undefined via #undef or
+# recursively expanded use the := operator instead of the = operator.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+PREDEFINED             =
+
+# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
+# tag can be used to specify a list of macro names that should be expanded. The
+# macro definition that is found in the sources will be used. Use the PREDEFINED
+# tag if you want to use a different macro definition that overrules the
+# definition found in the source code.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+EXPAND_AS_DEFINED      =
+
+# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
+# remove all references to function-like macros that are alone on a line, have
+# an all uppercase name, and do not end with a semicolon. Such function macros
+# are typically used for boiler-plate code, and will confuse the parser if not
+# removed.
+# The default value is: YES.
+# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
+
+SKIP_FUNCTION_MACROS   = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to external references
+#---------------------------------------------------------------------------
+
+# The TAGFILES tag can be used to specify one or more tag files. For each tag
+# file the location of the external documentation should be added. The format of
+# a tag file without this location is as follows:
+# TAGFILES = file1 file2 ...
+# Adding location for the tag files is done as follows:
+# TAGFILES = file1=loc1 "file2 = loc2" ...
+# where loc1 and loc2 can be relative or absolute paths or URLs. See the
+# section "Linking to external documentation" for more information about the use
+# of tag files.
+# Note: Each tag file must have a unique name (where the name does NOT include
+# the path). If a tag file is not located in the directory in which doxygen is
+# run, you must also specify the path to the tagfile here.
+
+TAGFILES               =
+
+# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
+# tag file that is based on the input files it reads. See section "Linking to
+# external documentation" for more information about the usage of tag files.
+
+GENERATE_TAGFILE       =
+
+# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# the class index. If set to NO, only the inherited external classes will be
+# listed.
+# The default value is: NO.
+
+ALLEXTERNALS           = NO
+
+# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
+# in the modules index. If set to NO, only the current project's groups will be
+# listed.
+# The default value is: YES.
+
+EXTERNAL_GROUPS        = YES
+
+# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in
+# the related pages index. If set to NO, only the current project's pages will
+# be listed.
+# The default value is: YES.
+
+EXTERNAL_PAGES         = YES
+
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool
+#---------------------------------------------------------------------------
+
+# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram
+# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
+# NO turns the diagrams off. Note that this option also works with HAVE_DOT
+# disabled, but it is recommended to install and use dot, since it yields more
+# powerful graphs.
+# The default value is: YES.
+
+CLASS_DIAGRAMS         = YES
+
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
+# then run dia to produce the diagram and insert it in the documentation. The
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
+
+DIA_PATH               =
+
+# If set to YES the inheritance and collaboration graphs will hide inheritance
+# and usage relations if the target is undocumented or is not a class.
+# The default value is: YES.
+
+HIDE_UNDOC_RELATIONS   = YES
+
+# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
+# available from the path. This tool is part of Graphviz (see:
+# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# Bell Labs. The other options in this section have no effect if this option is
+# set to NO
+# The default value is: YES.
+
+HAVE_DOT               = YES
+
+# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
+# to run in parallel. When set to 0 doxygen will base this on the number of
+# processors available in the system. You can set it explicitly to a value
+# larger than 0 to get control over the balance between CPU load and processing
+# speed.
+# Minimum value: 0, maximum value: 32, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NUM_THREADS        = 0
+
+# When you want a differently looking font in the dot files that doxygen
+# generates you can specify the font name using DOT_FONTNAME. You need to make
+# sure dot is able to find the font, which can be done by putting it in a
+# standard location or by setting the DOTFONTPATH environment variable or by
+# setting DOT_FONTPATH to the directory containing the font.
+# The default value is: Helvetica.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTNAME           =
+
+# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# dot graphs.
+# Minimum value: 4, maximum value: 24, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTSIZE           = 10
+
+# By default doxygen will tell dot to use the default font as specified with
+# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# the path where dot can find it using this tag.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_FONTPATH           =
+
+# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
+# each documented class showing the direct and indirect inheritance relations.
+# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CLASS_GRAPH            = YES
+
+# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
+# graph for each documented class showing the direct and indirect implementation
+# dependencies (inheritance, containment, and class references variables) of the
+# class with other documented classes.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+COLLABORATION_GRAPH    = YES
+
+# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
+# groups, showing the direct groups dependencies.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GROUP_GRAPHS           = YES
+
+# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
+# collaboration diagrams in a style similar to the OMG's Unified Modeling
+# Language.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LOOK               = NO
+
+# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
+# class node. If there are many fields or methods and many nodes the graph may
+# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
+# number of items for each type to make the size more manageable. Set this to 0
+# for no limit. Note that the threshold may be exceeded by 50% before the limit
+# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
+# but if the number exceeds 15, the total amount of fields shown is limited to
+# 10.
+# Minimum value: 0, maximum value: 100, default value: 10.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+UML_LIMIT_NUM_FIELDS   = 10
+
+# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
+# collaboration graphs will show the relations between templates and their
+# instances.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+TEMPLATE_RELATIONS     = NO
+
+# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
+# YES then doxygen will generate a graph for each documented file showing the
+# direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDE_GRAPH          = YES
+
+# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
+# set to YES then doxygen will generate a graph for each documented file showing
+# the direct and indirect include dependencies of the file with other documented
+# files.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INCLUDED_BY_GRAPH      = YES
+
+# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable call graphs for selected
+# functions only using the \callgraph command. Disabling a call graph can be
+# accomplished by means of the command \hidecallgraph.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALL_GRAPH             = YES
+
+# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
+# dependency graph for every global function or class method.
+#
+# Note that enabling this option will significantly increase the time of a run.
+# So in most cases it will be better to enable caller graphs for selected
+# functions only using the \callergraph command. Disabling a caller graph can be
+# accomplished by means of the command \hidecallergraph.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+CALLER_GRAPH           = YES
+
+# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
+# hierarchy of all classes instead of a textual one.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GRAPHICAL_HIERARCHY    = YES
+
+# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
+# dependencies a directory has on other directories in a graphical way. The
+# dependency relations are determined by the #include relations between the
+# files in the directories.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DIRECTORY_GRAPH        = YES
+
+# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
+# generated by dot. For an explanation of the image formats see the section
+# output formats in the documentation of the dot tool (Graphviz (see:
+# http://www.graphviz.org/)).
+# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
+# to make the SVG files visible in IE 9+ (other browsers do not have this
+# requirement).
+# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd,
+# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo,
+# gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd, png:cairo,
+# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
+# png:gdiplus:gdiplus.
+# The default value is: png.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_IMAGE_FORMAT       = svg
+
+# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
+# enable generation of interactive SVG images that allow zooming and panning.
+#
+# Note that this requires a modern browser other than Internet Explorer. Tested
+# and working are Firefox, Chrome, Safari, and Opera.
+# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
+# the SVG files visible. Older versions of IE do not have SVG support.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+INTERACTIVE_SVG        = NO
+
+# The DOT_PATH tag can be used to specify the path where the dot tool can be
+# found. If left blank, it is assumed the dot tool can be found in the path.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_PATH               =
+
+# The DOTFILE_DIRS tag can be used to specify one or more directories that
+# contain dot files that are included in the documentation (see the \dotfile
+# command).
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOTFILE_DIRS           =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =
+
+# The DIAFILE_DIRS tag can be used to specify one or more directories that
+# contain dia files that are included in the documentation (see the \diafile
+# command).
+
+DIAFILE_DIRS           =
+
+# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
+# path where java can find the plantuml.jar file. If left blank, it is assumed
+# PlantUML is not used or called during a preprocessing step. Doxygen will
+# generate a warning when it encounters a \startuml command in this case and
+# will not generate output for the diagram.
+
+PLANTUML_JAR_PATH      =
+
+# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a
+# configuration file for plantuml.
+
+PLANTUML_CFG_FILE      =
+
+# When using plantuml, the specified paths are searched for files specified by
+# the !include statement in a plantuml block.
+
+PLANTUML_INCLUDE_PATH  =
+
+# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
+# that will be shown in the graph. If the number of nodes in a graph becomes
+# larger than this value, doxygen will truncate the graph, which is visualized
+# by representing a node as a red box. Note that doxygen if the number of direct
+# children of the root node in a graph is already larger than
+# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
+# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
+# Minimum value: 0, maximum value: 10000, default value: 50.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_GRAPH_MAX_NODES    = 100
+
+# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
+# generated by dot. A depth value of 3 means that only nodes reachable from the
+# root by following a path via at most 3 edges will be shown. Nodes that lay
+# further from the root node will be omitted. Note that setting this option to 1
+# or 2 may greatly reduce the computation time needed for large code bases. Also
+# note that the size of a graph can be further restricted by
+# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
+# Minimum value: 0, maximum value: 1000, default value: 0.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+MAX_DOT_GRAPH_DEPTH    = 0
+
+# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
+# background. This is disabled by default, because dot on Windows does not seem
+# to support this out of the box.
+#
+# Warning: Depending on the platform used, enabling this option may lead to
+# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
+# read).
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_TRANSPARENT        = YES
+
+# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
+# files in one run (i.e. multiple -o and -T options on the command line). This
+# makes dot run faster, but since only newer versions of dot (>1.8.10) support
+# this, this feature is disabled by default.
+# The default value is: NO.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_MULTI_TARGETS      = YES
+
+# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
+# explaining the meaning of the various boxes and arrows in the dot generated
+# graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+GENERATE_LEGEND        = YES
+
+# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot
+# files that are used to generate the various graphs.
+# The default value is: YES.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_CLEANUP            = YES
diff -Naurp dpkg-1.20.7.1-orig/dpkg-deb/.deps/build.Po dpkg-1.20.7.1/dpkg-deb/.deps/build.Po
--- dpkg-1.20.7.1-orig/dpkg-deb/.deps/build.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-deb/.deps/build.Po	2021-06-09 18:25:08.965494286 -0500
@@ -0,0 +1,391 @@
+build.o: build.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h \
+ /usr/include/sys/wait.h /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/inttypes.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h /usr/include/string.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/time.h /usr/include/bits/time.h \
+ /usr/include/bits/timex.h /usr/include/bits/types/struct_tm.h \
+ /usr/include/bits/types/struct_itimerspec.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h /usr/include/fcntl.h \
+ /usr/include/bits/fcntl.h /usr/include/bits/fcntl-linux.h \
+ /usr/include/bits/types/struct_iovec.h /usr/include/linux/falloc.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdlib.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/c-ctype.h ../lib/dpkg/dpkg.h \
+ ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/path.h \
+ ../lib/dpkg/treewalk.h ../lib/dpkg/fdio.h ../lib/dpkg/buffer.h \
+ ../lib/dpkg/subproc.h ../lib/dpkg/command.h ../lib/dpkg/compress.h \
+ ../lib/dpkg/ar.h /usr/include/ar.h ../lib/dpkg/options.h dpkg-deb.h \
+ ../lib/dpkg/deb-version.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/sys/wait.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/inttypes.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/time.h:
+
+/usr/include/bits/time.h:
+
+/usr/include/bits/timex.h:
+
+/usr/include/bits/types/struct_tm.h:
+
+/usr/include/bits/types/struct_itimerspec.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/c-ctype.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/path.h:
+
+../lib/dpkg/treewalk.h:
+
+../lib/dpkg/fdio.h:
+
+../lib/dpkg/buffer.h:
+
+../lib/dpkg/subproc.h:
+
+../lib/dpkg/command.h:
+
+../lib/dpkg/compress.h:
+
+../lib/dpkg/ar.h:
+
+/usr/include/ar.h:
+
+../lib/dpkg/options.h:
+
+dpkg-deb.h:
+
+../lib/dpkg/deb-version.h:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-deb/.deps/extract.Po dpkg-1.20.7.1/dpkg-deb/.deps/extract.Po
--- dpkg-1.20.7.1-orig/dpkg-deb/.deps/extract.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-deb/.deps/extract.Po	2021-06-09 18:25:09.114494513 -0500
@@ -0,0 +1,369 @@
+extract.o: extract.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h \
+ /usr/include/sys/wait.h /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ /usr/include/dirent.h /usr/include/bits/dirent.h /usr/include/fcntl.h \
+ /usr/include/bits/fcntl.h /usr/include/bits/fcntl-linux.h \
+ /usr/include/bits/types/struct_iovec.h /usr/include/linux/falloc.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/include/ar.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h /usr/include/stdlib.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h ../lib/dpkg/program.h \
+ ../lib/dpkg/fdio.h ../lib/dpkg/buffer.h ../lib/dpkg/error.h \
+ ../lib/dpkg/subproc.h ../lib/dpkg/command.h ../lib/dpkg/compress.h \
+ ../lib/dpkg/ar.h ../lib/dpkg/deb-version.h ../lib/dpkg/options.h \
+ ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h ../lib/dpkg/version.h \
+ ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h \
+ dpkg-deb.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/sys/wait.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/ar.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/fdio.h:
+
+../lib/dpkg/buffer.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/subproc.h:
+
+../lib/dpkg/command.h:
+
+../lib/dpkg/compress.h:
+
+../lib/dpkg/ar.h:
+
+../lib/dpkg/deb-version.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+dpkg-deb.h:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-deb/.deps/info.Po dpkg-1.20.7.1/dpkg-deb/.deps/info.Po
--- dpkg-1.20.7.1-orig/dpkg-deb/.deps/info.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-deb/.deps/info.Po	2021-06-09 18:25:09.225494682 -0500
@@ -0,0 +1,365 @@
+info.o: info.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h \
+ /usr/include/sys/wait.h /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h /usr/include/stdlib.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h \
+ ../lib/dpkg/varbuf.h ../lib/dpkg/version.h ../lib/dpkg/arch.h \
+ ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h ../lib/dpkg/error.h \
+ ../lib/dpkg/parsedump.h ../lib/dpkg/pkg-format.h ../lib/dpkg/buffer.h \
+ ../lib/dpkg/path.h ../lib/dpkg/options.h dpkg-deb.h \
+ ../lib/dpkg/deb-version.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/sys/wait.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/parsedump.h:
+
+../lib/dpkg/pkg-format.h:
+
+../lib/dpkg/buffer.h:
+
+../lib/dpkg/path.h:
+
+../lib/dpkg/options.h:
+
+dpkg-deb.h:
+
+../lib/dpkg/deb-version.h:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-deb/.deps/main.Po dpkg-1.20.7.1/dpkg-deb/.deps/main.Po
--- dpkg-1.20.7.1-orig/dpkg-deb/.deps/main.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-deb/.deps/main.Po	2021-06-09 18:25:09.287494777 -0500
@@ -0,0 +1,325 @@
+main.o: main.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/wait.h \
+ /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/errno.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/string.h \
+ /usr/include/strings.h /usr/include/dirent.h /usr/include/bits/dirent.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/include/stdlib.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/macros.h ../lib/dpkg/i18n.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h ../lib/dpkg/dpkg.h \
+ ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/compress.h \
+ ../lib/dpkg/options.h dpkg-deb.h ../lib/dpkg/deb-version.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/wait.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/macros.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/compress.h:
+
+../lib/dpkg/options.h:
+
+dpkg-deb.h:
+
+../lib/dpkg/deb-version.h:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-deb/Makefile dpkg-1.20.7.1/dpkg-deb/Makefile
--- dpkg-1.20.7.1-orig/dpkg-deb/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-deb/Makefile	2021-06-09 18:24:51.846468155 -0500
@@ -0,0 +1,744 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# dpkg-deb/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+bin_PROGRAMS = dpkg-deb$(EXEEXT)
+subdir = dpkg-deb
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_dpkg_deb_OBJECTS = build.$(OBJEXT) extract.$(OBJEXT) info.$(OBJEXT) \
+	main.$(OBJEXT)
+dpkg_deb_OBJECTS = $(am_dpkg_deb_OBJECTS)
+am__DEPENDENCIES_1 =
+dpkg_deb_DEPENDENCIES = ../lib/dpkg/libdpkg.la $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/build.Po ./$(DEPDIR)/extract.Po \
+	./$(DEPDIR)/info.Po ./$(DEPDIR)/main.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(dpkg_deb_SOURCES)
+DIST_SOURCES = $(dpkg_deb_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/dpkg-deb
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/dpkg-deb
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = $(datadir)/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+AM_CPPFLAGS = \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+dpkg_deb_SOURCES = \
+	dpkg-deb.h \
+	build.c \
+	extract.c \
+	info.c \
+	main.c
+
+dpkg_deb_LDADD = \
+	../lib/dpkg/libdpkg.la \
+	$(LIBINTL) \
+	$(Z_LIBS) \
+	$(LZMA_LIBS) \
+	$(BZ2_LIBS)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign dpkg-deb/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign dpkg-deb/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+dpkg-deb$(EXEEXT): $(dpkg_deb_OBJECTS) $(dpkg_deb_DEPENDENCIES) $(EXTRA_dpkg_deb_DEPENDENCIES) 
+	@rm -f dpkg-deb$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_deb_OBJECTS) $(dpkg_deb_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/build.Po # am--include-marker
+include ./$(DEPDIR)/extract.Po # am--include-marker
+include ./$(DEPDIR)/info.Po # am--include-marker
+include ./$(DEPDIR)/main.Po # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	$(AM_V_CC)source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/build.Po
+	-rm -f ./$(DEPDIR)/extract.Po
+	-rm -f ./$(DEPDIR)/info.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/build.Po
+	-rm -f ./$(DEPDIR)/extract.Po
+	-rm -f ./$(DEPDIR)/info.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libtool cscopelist-am \
+	ctags ctags-am distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-deb/Makefile.in dpkg-1.20.7.1/dpkg-deb/Makefile.in
--- dpkg-1.20.7.1-orig/dpkg-deb/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-deb/Makefile.in	2021-06-09 18:23:00.623295974 -0500
@@ -0,0 +1,744 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = dpkg-deb$(EXEEXT)
+subdir = dpkg-deb
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_dpkg_deb_OBJECTS = build.$(OBJEXT) extract.$(OBJEXT) info.$(OBJEXT) \
+	main.$(OBJEXT)
+dpkg_deb_OBJECTS = $(am_dpkg_deb_OBJECTS)
+am__DEPENDENCIES_1 =
+dpkg_deb_DEPENDENCIES = ../lib/dpkg/libdpkg.la $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+	$(am__DEPENDENCIES_1)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/build.Po ./$(DEPDIR)/extract.Po \
+	./$(DEPDIR)/info.Po ./$(DEPDIR)/main.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(dpkg_deb_SOURCES)
+DIST_SOURCES = $(dpkg_deb_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = $(datadir)/locale
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CPPFLAGS = \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+dpkg_deb_SOURCES = \
+	dpkg-deb.h \
+	build.c \
+	extract.c \
+	info.c \
+	main.c
+
+dpkg_deb_LDADD = \
+	../lib/dpkg/libdpkg.la \
+	$(LIBINTL) \
+	$(Z_LIBS) \
+	$(LZMA_LIBS) \
+	$(BZ2_LIBS)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign dpkg-deb/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign dpkg-deb/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+dpkg-deb$(EXEEXT): $(dpkg_deb_OBJECTS) $(dpkg_deb_DEPENDENCIES) $(EXTRA_dpkg_deb_DEPENDENCIES) 
+	@rm -f dpkg-deb$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_deb_OBJECTS) $(dpkg_deb_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/build.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/extract.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/info.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/build.Po
+	-rm -f ./$(DEPDIR)/extract.Po
+	-rm -f ./$(DEPDIR)/info.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/build.Po
+	-rm -f ./$(DEPDIR)/extract.Po
+	-rm -f ./$(DEPDIR)/info.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libtool cscopelist-am \
+	ctags ctags-am distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-split/.deps/info.Po dpkg-1.20.7.1/dpkg-split/.deps/info.Po
--- dpkg-1.20.7.1-orig/dpkg-split/.deps/info.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-split/.deps/info.Po	2021-06-09 18:25:09.505495110 -0500
@@ -0,0 +1,294 @@
+info.o: info.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/stat.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/errno.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/ar.h \
+ /usr/include/inttypes.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-intn.h /usr/include/bits/stdint-uintn.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h \
+ ../lib/dpkg/varbuf.h ../lib/dpkg/version.h ../lib/dpkg/arch.h \
+ ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h ../lib/dpkg/error.h \
+ ../lib/dpkg/fdio.h ../lib/dpkg/ar.h ../lib/dpkg/options.h dpkg-split.h \
+ ../lib/dpkg/deb-version.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/ar.h:
+
+/usr/include/inttypes.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/fdio.h:
+
+../lib/dpkg/ar.h:
+
+../lib/dpkg/options.h:
+
+dpkg-split.h:
+
+../lib/dpkg/deb-version.h:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-split/.deps/join.Po dpkg-1.20.7.1/dpkg-split/.deps/join.Po
--- dpkg-1.20.7.1-orig/dpkg-split/.deps/join.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-split/.deps/join.Po	2021-06-09 18:25:09.576495218 -0500
@@ -0,0 +1,279 @@
+join.o: join.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/fcntl.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/stat.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/buffer.h \
+ ../lib/dpkg/options.h dpkg-split.h ../lib/dpkg/ar.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h /usr/include/ar.h \
+ ../lib/dpkg/deb-version.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/buffer.h:
+
+../lib/dpkg/options.h:
+
+dpkg-split.h:
+
+../lib/dpkg/ar.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/ar.h:
+
+../lib/dpkg/deb-version.h:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-split/.deps/main.Po dpkg-1.20.7.1/dpkg-split/.deps/main.Po
--- dpkg-1.20.7.1-orig/dpkg-split/.deps/main.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-split/.deps/main.Po	2021-06-09 18:25:09.625495293 -0500
@@ -0,0 +1,267 @@
+main.o: main.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/inttypes.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h /usr/include/locale.h \
+ /usr/include/bits/locale.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/string.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/macros.h ../lib/dpkg/i18n.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h ../lib/dpkg/dpkg.h \
+ ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/options.h \
+ dpkg-split.h ../lib/dpkg/ar.h /usr/include/ar.h \
+ ../lib/dpkg/deb-version.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/inttypes.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/macros.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/options.h:
+
+dpkg-split.h:
+
+../lib/dpkg/ar.h:
+
+/usr/include/ar.h:
+
+../lib/dpkg/deb-version.h:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-split/.deps/queue.Po dpkg-1.20.7.1/dpkg-split/.deps/queue.Po
--- dpkg-1.20.7.1-orig/dpkg-split/.deps/queue.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-split/.deps/queue.Po	2021-06-09 18:25:09.745495476 -0500
@@ -0,0 +1,310 @@
+queue.o: queue.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/stat.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/errno.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/inttypes.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-intn.h /usr/include/bits/stdint-uintn.h \
+ /usr/include/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/dir.h \
+ ../lib/dpkg/buffer.h ../lib/dpkg/options.h dpkg-split.h ../lib/dpkg/ar.h \
+ /usr/include/ar.h ../lib/dpkg/deb-version.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/inttypes.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/dir.h:
+
+../lib/dpkg/buffer.h:
+
+../lib/dpkg/options.h:
+
+dpkg-split.h:
+
+../lib/dpkg/ar.h:
+
+/usr/include/ar.h:
+
+../lib/dpkg/deb-version.h:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-split/.deps/split.Po dpkg-1.20.7.1/dpkg-split/.deps/split.Po
--- dpkg-1.20.7.1-orig/dpkg-split/.deps/split.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-split/.deps/split.Po	2021-06-09 18:25:09.836495615 -0500
@@ -0,0 +1,381 @@
+split.o: split.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h \
+ /usr/include/sys/wait.h /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/inttypes.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h /usr/include/fcntl.h \
+ /usr/include/bits/fcntl.h /usr/include/bits/fcntl-linux.h \
+ /usr/include/bits/types/struct_iovec.h /usr/include/linux/falloc.h \
+ /usr/include/libgen.h /usr/include/string.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/time.h /usr/include/bits/time.h \
+ /usr/include/bits/timex.h /usr/include/bits/types/struct_tm.h \
+ /usr/include/bits/types/struct_itimerspec.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h \
+ ../lib/dpkg/varbuf.h ../lib/dpkg/version.h ../lib/dpkg/arch.h \
+ ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h ../lib/dpkg/error.h \
+ ../lib/dpkg/parsedump.h ../lib/dpkg/path.h ../lib/dpkg/subproc.h \
+ ../lib/dpkg/buffer.h ../lib/dpkg/ar.h /usr/include/ar.h \
+ ../lib/dpkg/options.h dpkg-split.h ../lib/dpkg/deb-version.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/sys/wait.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/inttypes.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/libgen.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/time.h:
+
+/usr/include/bits/time.h:
+
+/usr/include/bits/timex.h:
+
+/usr/include/bits/types/struct_tm.h:
+
+/usr/include/bits/types/struct_itimerspec.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/parsedump.h:
+
+../lib/dpkg/path.h:
+
+../lib/dpkg/subproc.h:
+
+../lib/dpkg/buffer.h:
+
+../lib/dpkg/ar.h:
+
+/usr/include/ar.h:
+
+../lib/dpkg/options.h:
+
+dpkg-split.h:
+
+../lib/dpkg/deb-version.h:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-split/Makefile dpkg-1.20.7.1/dpkg-split/Makefile
--- dpkg-1.20.7.1-orig/dpkg-split/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-split/Makefile	2021-06-09 18:24:51.855468169 -0500
@@ -0,0 +1,748 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# dpkg-split/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+bin_PROGRAMS = dpkg-split$(EXEEXT)
+subdir = dpkg-split
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_dpkg_split_OBJECTS = info.$(OBJEXT) join.$(OBJEXT) main.$(OBJEXT) \
+	queue.$(OBJEXT) split.$(OBJEXT)
+dpkg_split_OBJECTS = $(am_dpkg_split_OBJECTS)
+am__DEPENDENCIES_1 =
+dpkg_split_DEPENDENCIES = ../lib/dpkg/libdpkg.la $(am__DEPENDENCIES_1)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/info.Po ./$(DEPDIR)/join.Po \
+	./$(DEPDIR)/main.Po ./$(DEPDIR)/queue.Po ./$(DEPDIR)/split.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(dpkg_split_SOURCES)
+DIST_SOURCES = $(dpkg_split_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/dpkg-split
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/dpkg-split
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = $(datadir)/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+AM_CPPFLAGS = \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-DADMINDIR=\"$(admindir)\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+dpkg_split_SOURCES = \
+	dpkg-split.h \
+	info.c \
+	join.c \
+	main.c \
+	queue.c \
+	split.c
+
+dpkg_split_LDADD = \
+	../lib/dpkg/libdpkg.la \
+	$(LIBINTL)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign dpkg-split/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign dpkg-split/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+dpkg-split$(EXEEXT): $(dpkg_split_OBJECTS) $(dpkg_split_DEPENDENCIES) $(EXTRA_dpkg_split_DEPENDENCIES) 
+	@rm -f dpkg-split$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_split_OBJECTS) $(dpkg_split_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/info.Po # am--include-marker
+include ./$(DEPDIR)/join.Po # am--include-marker
+include ./$(DEPDIR)/main.Po # am--include-marker
+include ./$(DEPDIR)/queue.Po # am--include-marker
+include ./$(DEPDIR)/split.Po # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	$(AM_V_CC)source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/info.Po
+	-rm -f ./$(DEPDIR)/join.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/queue.Po
+	-rm -f ./$(DEPDIR)/split.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/info.Po
+	-rm -f ./$(DEPDIR)/join.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/queue.Po
+	-rm -f ./$(DEPDIR)/split.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libtool cscopelist-am \
+	ctags ctags-am distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+install-data-local:
+	$(MKDIR_P) $(DESTDIR)$(admindir)/parts
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/dpkg-split/Makefile.in dpkg-1.20.7.1/dpkg-split/Makefile.in
--- dpkg-1.20.7.1-orig/dpkg-split/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dpkg-split/Makefile.in	2021-06-09 18:23:00.650296017 -0500
@@ -0,0 +1,748 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = dpkg-split$(EXEEXT)
+subdir = dpkg-split
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_dpkg_split_OBJECTS = info.$(OBJEXT) join.$(OBJEXT) main.$(OBJEXT) \
+	queue.$(OBJEXT) split.$(OBJEXT)
+dpkg_split_OBJECTS = $(am_dpkg_split_OBJECTS)
+am__DEPENDENCIES_1 =
+dpkg_split_DEPENDENCIES = ../lib/dpkg/libdpkg.la $(am__DEPENDENCIES_1)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/info.Po ./$(DEPDIR)/join.Po \
+	./$(DEPDIR)/main.Po ./$(DEPDIR)/queue.Po ./$(DEPDIR)/split.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(dpkg_split_SOURCES)
+DIST_SOURCES = $(dpkg_split_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = $(datadir)/locale
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CPPFLAGS = \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-DADMINDIR=\"$(admindir)\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+dpkg_split_SOURCES = \
+	dpkg-split.h \
+	info.c \
+	join.c \
+	main.c \
+	queue.c \
+	split.c
+
+dpkg_split_LDADD = \
+	../lib/dpkg/libdpkg.la \
+	$(LIBINTL)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign dpkg-split/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign dpkg-split/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+dpkg-split$(EXEEXT): $(dpkg_split_OBJECTS) $(dpkg_split_DEPENDENCIES) $(EXTRA_dpkg_split_DEPENDENCIES) 
+	@rm -f dpkg-split$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_split_OBJECTS) $(dpkg_split_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/info.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/join.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/queue.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/split.Po@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/info.Po
+	-rm -f ./$(DEPDIR)/join.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/queue.Po
+	-rm -f ./$(DEPDIR)/split.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/info.Po
+	-rm -f ./$(DEPDIR)/join.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/queue.Po
+	-rm -f ./$(DEPDIR)/split.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libtool cscopelist-am \
+	ctags ctags-am distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+install-data-local:
+	$(MKDIR_P) $(DESTDIR)$(admindir)/parts
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/basecmds.Po dpkg-1.20.7.1/dselect/.deps/basecmds.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/basecmds.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/basecmds.Po	2021-06-09 18:23:51.431375475 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/baselist.Po dpkg-1.20.7.1/dselect/.deps/baselist.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/baselist.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/baselist.Po	2021-06-09 18:23:51.433375478 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/basetop.Po dpkg-1.20.7.1/dselect/.deps/basetop.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/basetop.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/basetop.Po	2021-06-09 18:23:51.434375480 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/bindings.Po dpkg-1.20.7.1/dselect/.deps/bindings.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/bindings.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/bindings.Po	2021-06-09 18:23:51.435375482 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/curkeys.Po dpkg-1.20.7.1/dselect/.deps/curkeys.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/curkeys.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/curkeys.Po	2021-06-09 18:23:51.437375485 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/cxx-support.Po dpkg-1.20.7.1/dselect/.deps/cxx-support.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/cxx-support.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/cxx-support.Po	2021-06-09 18:23:51.438375486 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/helpmsgs.Po dpkg-1.20.7.1/dselect/.deps/helpmsgs.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/helpmsgs.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/helpmsgs.Po	2021-06-09 18:23:51.439375488 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/main.Po dpkg-1.20.7.1/dselect/.deps/main.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/main.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/main.Po	2021-06-09 18:23:51.440375489 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/methkeys.Po dpkg-1.20.7.1/dselect/.deps/methkeys.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/methkeys.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/methkeys.Po	2021-06-09 18:23:51.442375493 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/methlist.Po dpkg-1.20.7.1/dselect/.deps/methlist.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/methlist.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/methlist.Po	2021-06-09 18:23:51.443375494 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/method.Po dpkg-1.20.7.1/dselect/.deps/method.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/method.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/method.Po	2021-06-09 18:23:51.444375496 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/methparse.Po dpkg-1.20.7.1/dselect/.deps/methparse.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/methparse.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/methparse.Po	2021-06-09 18:23:51.446375499 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/pkgcmds.Po dpkg-1.20.7.1/dselect/.deps/pkgcmds.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/pkgcmds.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/pkgcmds.Po	2021-06-09 18:23:51.447375501 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/pkgdepcon.Po dpkg-1.20.7.1/dselect/.deps/pkgdepcon.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/pkgdepcon.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/pkgdepcon.Po	2021-06-09 18:23:51.449375503 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/pkgdisplay.Po dpkg-1.20.7.1/dselect/.deps/pkgdisplay.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/pkgdisplay.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/pkgdisplay.Po	2021-06-09 18:23:51.450375505 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/pkginfo.Po dpkg-1.20.7.1/dselect/.deps/pkginfo.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/pkginfo.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/pkginfo.Po	2021-06-09 18:23:51.451375507 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/pkgkeys.Po dpkg-1.20.7.1/dselect/.deps/pkgkeys.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/pkgkeys.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/pkgkeys.Po	2021-06-09 18:23:51.453375510 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/pkglist.Po dpkg-1.20.7.1/dselect/.deps/pkglist.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/pkglist.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/pkglist.Po	2021-06-09 18:23:51.454375512 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/pkgsublist.Po dpkg-1.20.7.1/dselect/.deps/pkgsublist.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/pkgsublist.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/pkgsublist.Po	2021-06-09 18:23:51.455375513 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/.deps/pkgtop.Po dpkg-1.20.7.1/dselect/.deps/pkgtop.Po
--- dpkg-1.20.7.1-orig/dselect/.deps/pkgtop.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/.deps/pkgtop.Po	2021-06-09 18:23:51.457375516 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/dselect/Makefile dpkg-1.20.7.1/dselect/Makefile
--- dpkg-1.20.7.1-orig/dselect/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/Makefile	2021-06-09 18:24:51.864468183 -0500
@@ -0,0 +1,980 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# dselect/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+bin_PROGRAMS = dselect$(EXEEXT)
+subdir = dselect
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_dselect_OBJECTS = cxx-support.$(OBJEXT) basecmds.$(OBJEXT) \
+	baselist.$(OBJEXT) basetop.$(OBJEXT) bindings.$(OBJEXT) \
+	curkeys.$(OBJEXT) helpmsgs.$(OBJEXT) main.$(OBJEXT) \
+	methkeys.$(OBJEXT) methlist.$(OBJEXT) method.$(OBJEXT) \
+	methparse.$(OBJEXT) pkgcmds.$(OBJEXT) pkgdepcon.$(OBJEXT) \
+	pkgdisplay.$(OBJEXT) pkginfo.$(OBJEXT) pkgkeys.$(OBJEXT) \
+	pkglist.$(OBJEXT) pkgsublist.$(OBJEXT) pkgtop.$(OBJEXT)
+dselect_OBJECTS = $(am_dselect_OBJECTS)
+am__DEPENDENCIES_1 =
+dselect_DEPENDENCIES = $(am__DEPENDENCIES_1) ../lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/basecmds.Po ./$(DEPDIR)/baselist.Po \
+	./$(DEPDIR)/basetop.Po ./$(DEPDIR)/bindings.Po \
+	./$(DEPDIR)/curkeys.Po ./$(DEPDIR)/cxx-support.Po \
+	./$(DEPDIR)/helpmsgs.Po ./$(DEPDIR)/main.Po \
+	./$(DEPDIR)/methkeys.Po ./$(DEPDIR)/methlist.Po \
+	./$(DEPDIR)/method.Po ./$(DEPDIR)/methparse.Po \
+	./$(DEPDIR)/pkgcmds.Po ./$(DEPDIR)/pkgdepcon.Po \
+	./$(DEPDIR)/pkgdisplay.Po ./$(DEPDIR)/pkginfo.Po \
+	./$(DEPDIR)/pkgkeys.Po ./$(DEPDIR)/pkglist.Po \
+	./$(DEPDIR)/pkgsublist.Po ./$(DEPDIR)/pkgtop.Po
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_CXX = $(am__v_CXX_$(V))
+am__v_CXX_ = $(am__v_CXX_$(AM_DEFAULT_VERBOSITY))
+am__v_CXX_0 = @echo "  CXX     " $@;
+am__v_CXX_1 = 
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CXXLD = $(am__v_CXXLD_$(V))
+am__v_CXXLD_ = $(am__v_CXXLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CXXLD_0 = @echo "  CXXLD   " $@;
+am__v_CXXLD_1 = 
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(dselect_SOURCES)
+DIST_SOURCES = $(dselect_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir distdir-am
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/dselect
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/dselect
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = $(datadir)/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = $(sysconfdir)/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+SUBDIRS = methods po
+AM_CPPFLAGS = \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-DADMINDIR=\"$(admindir)\" \
+	-DLIBDIR=\"$(pkglibexecdir)\" \
+	-DLOCALLIBDIR=\"/usr/local/lib/dpkg\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-iquote $(builddir) \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+AM_CXXFLAGS = \
+	-fno-rtti \
+	-fno-exceptions \
+	$(nil)
+
+AM_LDFLAGS = \
+	-Wl,--as-needed
+
+dselect_SOURCES = \
+	cxx-support.cc \
+	dselect.h \
+	dselect-curses.h \
+	basecmds.cc \
+	baselist.cc \
+	basetop.cc \
+	bindings.cc bindings.h \
+	curkeys.cc \
+	helpmsgs.cc helpmsgs.h \
+	main.cc \
+	methkeys.cc \
+	methlist.cc \
+	method.cc method.h \
+	methparse.cc \
+	pkgcmds.cc \
+	pkgdepcon.cc \
+	pkgdisplay.cc \
+	pkginfo.cc \
+	pkgkeys.cc \
+	pkglist.cc pkglist.h \
+	pkgsublist.cc \
+	pkgtop.cc
+
+dselect_LDADD = \
+	$(CURSES_LIBS) \
+	../lib/dpkg/libdpkg.la \
+	$(LIBINTL)
+
+EXTRA_DIST = keyoverride mkcurkeys.pl
+CLEANFILES = curkeys.hpp curkeys.h
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .cc .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign dselect/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign dselect/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+dselect$(EXEEXT): $(dselect_OBJECTS) $(dselect_DEPENDENCIES) $(EXTRA_dselect_DEPENDENCIES) 
+	@rm -f dselect$(EXEEXT)
+	$(AM_V_CXXLD)$(CXXLINK) $(dselect_OBJECTS) $(dselect_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/basecmds.Po # am--include-marker
+include ./$(DEPDIR)/baselist.Po # am--include-marker
+include ./$(DEPDIR)/basetop.Po # am--include-marker
+include ./$(DEPDIR)/bindings.Po # am--include-marker
+include ./$(DEPDIR)/curkeys.Po # am--include-marker
+include ./$(DEPDIR)/cxx-support.Po # am--include-marker
+include ./$(DEPDIR)/helpmsgs.Po # am--include-marker
+include ./$(DEPDIR)/main.Po # am--include-marker
+include ./$(DEPDIR)/methkeys.Po # am--include-marker
+include ./$(DEPDIR)/methlist.Po # am--include-marker
+include ./$(DEPDIR)/method.Po # am--include-marker
+include ./$(DEPDIR)/methparse.Po # am--include-marker
+include ./$(DEPDIR)/pkgcmds.Po # am--include-marker
+include ./$(DEPDIR)/pkgdepcon.Po # am--include-marker
+include ./$(DEPDIR)/pkgdisplay.Po # am--include-marker
+include ./$(DEPDIR)/pkginfo.Po # am--include-marker
+include ./$(DEPDIR)/pkgkeys.Po # am--include-marker
+include ./$(DEPDIR)/pkglist.Po # am--include-marker
+include ./$(DEPDIR)/pkgsublist.Po # am--include-marker
+include ./$(DEPDIR)/pkgtop.Po # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.cc.o:
+	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CXX)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
+#	$(AM_V_CXX_no)$(CXXCOMPILE) -c -o $@ $<
+
+.cc.obj:
+	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CXX)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
+#	$(AM_V_CXX_no)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.cc.lo:
+	$(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	$(AM_V_CXX)source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
+#	$(AM_V_CXX_no)$(LTCXXCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(PROGRAMS)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+		-rm -f ./$(DEPDIR)/basecmds.Po
+	-rm -f ./$(DEPDIR)/baselist.Po
+	-rm -f ./$(DEPDIR)/basetop.Po
+	-rm -f ./$(DEPDIR)/bindings.Po
+	-rm -f ./$(DEPDIR)/curkeys.Po
+	-rm -f ./$(DEPDIR)/cxx-support.Po
+	-rm -f ./$(DEPDIR)/helpmsgs.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/methkeys.Po
+	-rm -f ./$(DEPDIR)/methlist.Po
+	-rm -f ./$(DEPDIR)/method.Po
+	-rm -f ./$(DEPDIR)/methparse.Po
+	-rm -f ./$(DEPDIR)/pkgcmds.Po
+	-rm -f ./$(DEPDIR)/pkgdepcon.Po
+	-rm -f ./$(DEPDIR)/pkgdisplay.Po
+	-rm -f ./$(DEPDIR)/pkginfo.Po
+	-rm -f ./$(DEPDIR)/pkgkeys.Po
+	-rm -f ./$(DEPDIR)/pkglist.Po
+	-rm -f ./$(DEPDIR)/pkgsublist.Po
+	-rm -f ./$(DEPDIR)/pkgtop.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-data-local
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+		-rm -f ./$(DEPDIR)/basecmds.Po
+	-rm -f ./$(DEPDIR)/baselist.Po
+	-rm -f ./$(DEPDIR)/basetop.Po
+	-rm -f ./$(DEPDIR)/bindings.Po
+	-rm -f ./$(DEPDIR)/curkeys.Po
+	-rm -f ./$(DEPDIR)/cxx-support.Po
+	-rm -f ./$(DEPDIR)/helpmsgs.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/methkeys.Po
+	-rm -f ./$(DEPDIR)/methlist.Po
+	-rm -f ./$(DEPDIR)/method.Po
+	-rm -f ./$(DEPDIR)/methparse.Po
+	-rm -f ./$(DEPDIR)/pkgcmds.Po
+	-rm -f ./$(DEPDIR)/pkgdepcon.Po
+	-rm -f ./$(DEPDIR)/pkgdisplay.Po
+	-rm -f ./$(DEPDIR)/pkginfo.Po
+	-rm -f ./$(DEPDIR)/pkgkeys.Po
+	-rm -f ./$(DEPDIR)/pkglist.Po
+	-rm -f ./$(DEPDIR)/pkgsublist.Po
+	-rm -f ./$(DEPDIR)/pkgtop.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--depfiles check check-am clean clean-binPROGRAMS \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+curkeys.$(OBJEXT): curkeys.h
+curkeys.hpp: dselect-curses.h
+	$(AM_V_GEN) echo '#include "dselect-curses.h"' | \
+	  $(CPP) -dD $(CPPFLAGS) -I$(top_builddir) -I $(srcdir) - >$@
+curkeys.h: $(srcdir)/keyoverride $(srcdir)/mkcurkeys.pl curkeys.hpp
+	$(AM_V_GEN) $(PERL) $(srcdir)/mkcurkeys.pl $< curkeys.hpp >$@
+
+install-data-local:
+	$(MKDIR_P) $(DESTDIR)$(pkgconfdir)/dselect.cfg.d
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/dselect/Makefile.in dpkg-1.20.7.1/dselect/Makefile.in
--- dpkg-1.20.7.1-orig/dselect/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/Makefile.in	2021-06-09 18:23:00.681296065 -0500
@@ -0,0 +1,980 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = dselect$(EXEEXT)
+subdir = dselect
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_dselect_OBJECTS = cxx-support.$(OBJEXT) basecmds.$(OBJEXT) \
+	baselist.$(OBJEXT) basetop.$(OBJEXT) bindings.$(OBJEXT) \
+	curkeys.$(OBJEXT) helpmsgs.$(OBJEXT) main.$(OBJEXT) \
+	methkeys.$(OBJEXT) methlist.$(OBJEXT) method.$(OBJEXT) \
+	methparse.$(OBJEXT) pkgcmds.$(OBJEXT) pkgdepcon.$(OBJEXT) \
+	pkgdisplay.$(OBJEXT) pkginfo.$(OBJEXT) pkgkeys.$(OBJEXT) \
+	pkglist.$(OBJEXT) pkgsublist.$(OBJEXT) pkgtop.$(OBJEXT)
+dselect_OBJECTS = $(am_dselect_OBJECTS)
+am__DEPENDENCIES_1 =
+dselect_DEPENDENCIES = $(am__DEPENDENCIES_1) ../lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/basecmds.Po ./$(DEPDIR)/baselist.Po \
+	./$(DEPDIR)/basetop.Po ./$(DEPDIR)/bindings.Po \
+	./$(DEPDIR)/curkeys.Po ./$(DEPDIR)/cxx-support.Po \
+	./$(DEPDIR)/helpmsgs.Po ./$(DEPDIR)/main.Po \
+	./$(DEPDIR)/methkeys.Po ./$(DEPDIR)/methlist.Po \
+	./$(DEPDIR)/method.Po ./$(DEPDIR)/methparse.Po \
+	./$(DEPDIR)/pkgcmds.Po ./$(DEPDIR)/pkgdepcon.Po \
+	./$(DEPDIR)/pkgdisplay.Po ./$(DEPDIR)/pkginfo.Po \
+	./$(DEPDIR)/pkgkeys.Po ./$(DEPDIR)/pkglist.Po \
+	./$(DEPDIR)/pkgsublist.Po ./$(DEPDIR)/pkgtop.Po
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_CXX = $(am__v_CXX_@AM_V@)
+am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
+am__v_CXX_0 = @echo "  CXX     " $@;
+am__v_CXX_1 = 
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
+am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
+am__v_CXXLD_0 = @echo "  CXXLD   " $@;
+am__v_CXXLD_1 = 
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(dselect_SOURCES)
+DIST_SOURCES = $(dselect_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir distdir-am
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = $(datadir)/locale
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = $(sysconfdir)/@PACKAGE@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = methods po
+AM_CPPFLAGS = \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-DADMINDIR=\"$(admindir)\" \
+	-DLIBDIR=\"$(pkglibexecdir)\" \
+	-DLOCALLIBDIR=\"/usr/local/lib/dpkg\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-iquote $(builddir) \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+AM_CXXFLAGS = \
+	-fno-rtti \
+	-fno-exceptions \
+	$(nil)
+
+@HAVE_LINKER_AS_NEEDED_TRUE@AM_LDFLAGS = \
+@HAVE_LINKER_AS_NEEDED_TRUE@	-Wl,--as-needed
+
+dselect_SOURCES = \
+	cxx-support.cc \
+	dselect.h \
+	dselect-curses.h \
+	basecmds.cc \
+	baselist.cc \
+	basetop.cc \
+	bindings.cc bindings.h \
+	curkeys.cc \
+	helpmsgs.cc helpmsgs.h \
+	main.cc \
+	methkeys.cc \
+	methlist.cc \
+	method.cc method.h \
+	methparse.cc \
+	pkgcmds.cc \
+	pkgdepcon.cc \
+	pkgdisplay.cc \
+	pkginfo.cc \
+	pkgkeys.cc \
+	pkglist.cc pkglist.h \
+	pkgsublist.cc \
+	pkgtop.cc
+
+dselect_LDADD = \
+	$(CURSES_LIBS) \
+	../lib/dpkg/libdpkg.la \
+	$(LIBINTL)
+
+EXTRA_DIST = keyoverride mkcurkeys.pl
+CLEANFILES = curkeys.hpp curkeys.h
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .cc .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign dselect/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign dselect/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+dselect$(EXEEXT): $(dselect_OBJECTS) $(dselect_DEPENDENCIES) $(EXTRA_dselect_DEPENDENCIES) 
+	@rm -f dselect$(EXEEXT)
+	$(AM_V_CXXLD)$(CXXLINK) $(dselect_OBJECTS) $(dselect_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/basecmds.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/baselist.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/basetop.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bindings.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/curkeys.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cxx-support.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/helpmsgs.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/methkeys.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/methlist.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/method.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/methparse.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkgcmds.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkgdepcon.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkgdisplay.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkginfo.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkgkeys.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkglist.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkgsublist.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkgtop.Po@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.cc.o:
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
+
+.cc.obj:
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.cc.lo:
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(PROGRAMS)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+		-rm -f ./$(DEPDIR)/basecmds.Po
+	-rm -f ./$(DEPDIR)/baselist.Po
+	-rm -f ./$(DEPDIR)/basetop.Po
+	-rm -f ./$(DEPDIR)/bindings.Po
+	-rm -f ./$(DEPDIR)/curkeys.Po
+	-rm -f ./$(DEPDIR)/cxx-support.Po
+	-rm -f ./$(DEPDIR)/helpmsgs.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/methkeys.Po
+	-rm -f ./$(DEPDIR)/methlist.Po
+	-rm -f ./$(DEPDIR)/method.Po
+	-rm -f ./$(DEPDIR)/methparse.Po
+	-rm -f ./$(DEPDIR)/pkgcmds.Po
+	-rm -f ./$(DEPDIR)/pkgdepcon.Po
+	-rm -f ./$(DEPDIR)/pkgdisplay.Po
+	-rm -f ./$(DEPDIR)/pkginfo.Po
+	-rm -f ./$(DEPDIR)/pkgkeys.Po
+	-rm -f ./$(DEPDIR)/pkglist.Po
+	-rm -f ./$(DEPDIR)/pkgsublist.Po
+	-rm -f ./$(DEPDIR)/pkgtop.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-data-local
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+		-rm -f ./$(DEPDIR)/basecmds.Po
+	-rm -f ./$(DEPDIR)/baselist.Po
+	-rm -f ./$(DEPDIR)/basetop.Po
+	-rm -f ./$(DEPDIR)/bindings.Po
+	-rm -f ./$(DEPDIR)/curkeys.Po
+	-rm -f ./$(DEPDIR)/cxx-support.Po
+	-rm -f ./$(DEPDIR)/helpmsgs.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/methkeys.Po
+	-rm -f ./$(DEPDIR)/methlist.Po
+	-rm -f ./$(DEPDIR)/method.Po
+	-rm -f ./$(DEPDIR)/methparse.Po
+	-rm -f ./$(DEPDIR)/pkgcmds.Po
+	-rm -f ./$(DEPDIR)/pkgdepcon.Po
+	-rm -f ./$(DEPDIR)/pkgdisplay.Po
+	-rm -f ./$(DEPDIR)/pkginfo.Po
+	-rm -f ./$(DEPDIR)/pkgkeys.Po
+	-rm -f ./$(DEPDIR)/pkglist.Po
+	-rm -f ./$(DEPDIR)/pkgsublist.Po
+	-rm -f ./$(DEPDIR)/pkgtop.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--depfiles check check-am clean clean-binPROGRAMS \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+curkeys.$(OBJEXT): curkeys.h
+curkeys.hpp: dselect-curses.h
+	$(AM_V_GEN) echo '#include "dselect-curses.h"' | \
+	  $(CPP) -dD $(CPPFLAGS) -I$(top_builddir) -I $(srcdir) - >$@
+curkeys.h: $(srcdir)/keyoverride $(srcdir)/mkcurkeys.pl curkeys.hpp
+	$(AM_V_GEN) $(PERL) $(srcdir)/mkcurkeys.pl $< curkeys.hpp >$@
+
+install-data-local:
+	$(MKDIR_P) $(DESTDIR)$(pkgconfdir)/dselect.cfg.d
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/dselect/methods/Makefile dpkg-1.20.7.1/dselect/methods/Makefile
--- dpkg-1.20.7.1-orig/dselect/methods/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/methods/Makefile	2021-06-09 18:24:51.872468195 -0500
@@ -0,0 +1,748 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# dselect/methods/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+subdir = dselect/methods
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(nobase_dist_methods_SCRIPTS) \
+	$(nobase_dist_methods_DATA) $(nobase_dist_perllib_DATA) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(methodsdir)" \
+	"$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(perllibdir)"
+SCRIPTS = $(nobase_dist_methods_SCRIPTS) $(nobase_methods_SCRIPTS)
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+DATA = $(nobase_dist_methods_DATA) $(nobase_dist_perllib_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/dselect/methods
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/dselect/methods
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../../
+top_builddir = ../..
+top_srcdir = ../..
+methodsdir = $(pkglibexecdir)/methods
+nobase_dist_methods_DATA = \
+	disk/names \
+	disk/desc.mounted \
+	ftp/names \
+	ftp/desc.ftp \
+	multicd/names \
+	multicd/desc.multi_cd \
+	$(nil)
+
+nobase_methods_SCRIPTS = \
+	ftp/setup \
+	ftp/update \
+	ftp/install \
+	$(nil)
+
+nobase_dist_methods_SCRIPTS = \
+	disk/setup \
+	disk/update \
+	disk/install \
+	multicd/setup \
+	multicd/update \
+	multicd/install
+
+perllibdir = $(PERL_LIBDIR)
+nobase_dist_perllib_DATA = Dselect/Ftp.pm
+EXTRA_DIST = \
+	ftp/setup.pl \
+	ftp/update.pl \
+	ftp/install.pl \
+	multicd/README.multicd
+
+CLEANFILES = \
+	$(nobase_methods_SCRIPTS) \
+	$(nil)
+
+do_perl_subst = $(AM_V_GEN) sed \
+	-e "s:^\#![[:space:]]*/usr/bin/perl:\#!$(PERL):"
+
+SUFFIXES = .pl
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .pl
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign dselect/methods/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign dselect/methods/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-nobase_dist_methodsSCRIPTS: $(nobase_dist_methods_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_dist_methods_SCRIPTS)'; test -n "$(methodsdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(methodsdir)" || exit 1; \
+	fi; \
+	$(am__nobase_strip_setup); \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e "s|$$srcdirstrip/||" -e 'h;s|[^/]*$$||; s|^$$|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	  case $$type in \
+	  d) echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)/$$dir'"; \
+	     $(MKDIR_P) "$(DESTDIR)$(methodsdir)/$$dir" || exit $$?;; \
+	  f) \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(methodsdir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(methodsdir)$$dir" || exit $$?; \
+	     } \
+	  ;; esac \
+	; done
+
+uninstall-nobase_dist_methodsSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_dist_methods_SCRIPTS)'; test -n "$(methodsdir)" || exit 0; \
+	$(am__nobase_strip_setup); \
+	files=`$(am__nobase_strip) \
+	       -e 'h;s,.*/,,;$(transform);x;s|[^/]*$$||;G;s,\n,,'`; \
+	dir='$(DESTDIR)$(methodsdir)'; $(am__uninstall_files_from_dir)
+install-nobase_methodsSCRIPTS: $(nobase_methods_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_methods_SCRIPTS)'; test -n "$(methodsdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(methodsdir)" || exit 1; \
+	fi; \
+	$(am__nobase_strip_setup); \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e "s|$$srcdirstrip/||" -e 'h;s|[^/]*$$||; s|^$$|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	  case $$type in \
+	  d) echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)/$$dir'"; \
+	     $(MKDIR_P) "$(DESTDIR)$(methodsdir)/$$dir" || exit $$?;; \
+	  f) \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(methodsdir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(methodsdir)$$dir" || exit $$?; \
+	     } \
+	  ;; esac \
+	; done
+
+uninstall-nobase_methodsSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_methods_SCRIPTS)'; test -n "$(methodsdir)" || exit 0; \
+	$(am__nobase_strip_setup); \
+	files=`$(am__nobase_strip) \
+	       -e 'h;s,.*/,,;$(transform);x;s|[^/]*$$||;G;s,\n,,'`; \
+	dir='$(DESTDIR)$(methodsdir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-nobase_dist_methodsDATA: $(nobase_dist_methods_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_dist_methods_DATA)'; test -n "$(methodsdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(methodsdir)" || exit 1; \
+	fi; \
+	$(am__nobase_list) | while read dir files; do \
+	  xfiles=; for file in $$files; do \
+	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+	  test -z "$$xfiles" || { \
+	    test "x$$dir" = x. || { \
+	      echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)/$$dir'"; \
+	      $(MKDIR_P) "$(DESTDIR)$(methodsdir)/$$dir"; }; \
+	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(methodsdir)/$$dir'"; \
+	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(methodsdir)/$$dir" || exit $$?; }; \
+	done
+
+uninstall-nobase_dist_methodsDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_dist_methods_DATA)'; test -n "$(methodsdir)" || list=; \
+	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+	dir='$(DESTDIR)$(methodsdir)'; $(am__uninstall_files_from_dir)
+install-nobase_dist_perllibDATA: $(nobase_dist_perllib_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(perllibdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(perllibdir)" || exit 1; \
+	fi; \
+	$(am__nobase_list) | while read dir files; do \
+	  xfiles=; for file in $$files; do \
+	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+	  test -z "$$xfiles" || { \
+	    test "x$$dir" = x. || { \
+	      echo " $(MKDIR_P) '$(DESTDIR)$(perllibdir)/$$dir'"; \
+	      $(MKDIR_P) "$(DESTDIR)$(perllibdir)/$$dir"; }; \
+	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(perllibdir)/$$dir'"; \
+	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(perllibdir)/$$dir" || exit $$?; }; \
+	done
+
+uninstall-nobase_dist_perllibDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
+	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+	dir='$(DESTDIR)$(perllibdir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(SCRIPTS) $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(perllibdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-nobase_dist_methodsDATA \
+	install-nobase_dist_methodsSCRIPTS \
+	install-nobase_dist_perllibDATA install-nobase_methodsSCRIPTS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-nobase_dist_methodsDATA \
+	uninstall-nobase_dist_methodsSCRIPTS \
+	uninstall-nobase_dist_perllibDATA \
+	uninstall-nobase_methodsSCRIPTS
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am \
+	install-data-local install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-nobase_dist_methodsDATA \
+	install-nobase_dist_methodsSCRIPTS \
+	install-nobase_dist_perllibDATA install-nobase_methodsSCRIPTS \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am \
+	uninstall-nobase_dist_methodsDATA \
+	uninstall-nobase_dist_methodsSCRIPTS \
+	uninstall-nobase_dist_perllibDATA \
+	uninstall-nobase_methodsSCRIPTS
+
+.PRECIOUS: Makefile
+
+
+.pl:
+	@test -d `dirname $@` || $(MKDIR_P) `dirname $@`
+	$(do_perl_subst) <$< >$@
+	$(AM_V_at) chmod +x $@
+
+install-data-local:
+	$(MKDIR_P) $(DESTDIR)$(admindir)/methods/mnt
+	$(MKDIR_P) $(DESTDIR)$(admindir)/methods/disk
+	$(MKDIR_P) $(DESTDIR)$(admindir)/methods/ftp
+	$(MKDIR_P) $(DESTDIR)$(admindir)/methods/multicd
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/dselect/methods/Makefile.in dpkg-1.20.7.1/dselect/methods/Makefile.in
--- dpkg-1.20.7.1-orig/dselect/methods/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/methods/Makefile.in	2021-06-09 18:23:00.705296103 -0500
@@ -0,0 +1,748 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = dselect/methods
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(nobase_dist_methods_SCRIPTS) \
+	$(nobase_dist_methods_DATA) $(nobase_dist_perllib_DATA) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(methodsdir)" \
+	"$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(perllibdir)"
+SCRIPTS = $(nobase_dist_methods_SCRIPTS) $(nobase_methods_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+DATA = $(nobase_dist_methods_DATA) $(nobase_dist_perllib_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+methodsdir = $(pkglibexecdir)/methods
+nobase_dist_methods_DATA = \
+	disk/names \
+	disk/desc.mounted \
+	ftp/names \
+	ftp/desc.ftp \
+	multicd/names \
+	multicd/desc.multi_cd \
+	$(nil)
+
+nobase_methods_SCRIPTS = \
+	ftp/setup \
+	ftp/update \
+	ftp/install \
+	$(nil)
+
+nobase_dist_methods_SCRIPTS = \
+	disk/setup \
+	disk/update \
+	disk/install \
+	multicd/setup \
+	multicd/update \
+	multicd/install
+
+perllibdir = $(PERL_LIBDIR)
+nobase_dist_perllib_DATA = Dselect/Ftp.pm
+EXTRA_DIST = \
+	ftp/setup.pl \
+	ftp/update.pl \
+	ftp/install.pl \
+	multicd/README.multicd
+
+CLEANFILES = \
+	$(nobase_methods_SCRIPTS) \
+	$(nil)
+
+do_perl_subst = $(AM_V_GEN) sed \
+	-e "s:^\#![[:space:]]*/usr/bin/perl:\#!$(PERL):"
+
+SUFFIXES = .pl
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .pl
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign dselect/methods/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign dselect/methods/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-nobase_dist_methodsSCRIPTS: $(nobase_dist_methods_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_dist_methods_SCRIPTS)'; test -n "$(methodsdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(methodsdir)" || exit 1; \
+	fi; \
+	$(am__nobase_strip_setup); \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e "s|$$srcdirstrip/||" -e 'h;s|[^/]*$$||; s|^$$|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	  case $$type in \
+	  d) echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)/$$dir'"; \
+	     $(MKDIR_P) "$(DESTDIR)$(methodsdir)/$$dir" || exit $$?;; \
+	  f) \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(methodsdir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(methodsdir)$$dir" || exit $$?; \
+	     } \
+	  ;; esac \
+	; done
+
+uninstall-nobase_dist_methodsSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_dist_methods_SCRIPTS)'; test -n "$(methodsdir)" || exit 0; \
+	$(am__nobase_strip_setup); \
+	files=`$(am__nobase_strip) \
+	       -e 'h;s,.*/,,;$(transform);x;s|[^/]*$$||;G;s,\n,,'`; \
+	dir='$(DESTDIR)$(methodsdir)'; $(am__uninstall_files_from_dir)
+install-nobase_methodsSCRIPTS: $(nobase_methods_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_methods_SCRIPTS)'; test -n "$(methodsdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(methodsdir)" || exit 1; \
+	fi; \
+	$(am__nobase_strip_setup); \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e "s|$$srcdirstrip/||" -e 'h;s|[^/]*$$||; s|^$$|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	  case $$type in \
+	  d) echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)/$$dir'"; \
+	     $(MKDIR_P) "$(DESTDIR)$(methodsdir)/$$dir" || exit $$?;; \
+	  f) \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(methodsdir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(methodsdir)$$dir" || exit $$?; \
+	     } \
+	  ;; esac \
+	; done
+
+uninstall-nobase_methodsSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_methods_SCRIPTS)'; test -n "$(methodsdir)" || exit 0; \
+	$(am__nobase_strip_setup); \
+	files=`$(am__nobase_strip) \
+	       -e 'h;s,.*/,,;$(transform);x;s|[^/]*$$||;G;s,\n,,'`; \
+	dir='$(DESTDIR)$(methodsdir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-nobase_dist_methodsDATA: $(nobase_dist_methods_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_dist_methods_DATA)'; test -n "$(methodsdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(methodsdir)" || exit 1; \
+	fi; \
+	$(am__nobase_list) | while read dir files; do \
+	  xfiles=; for file in $$files; do \
+	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+	  test -z "$$xfiles" || { \
+	    test "x$$dir" = x. || { \
+	      echo " $(MKDIR_P) '$(DESTDIR)$(methodsdir)/$$dir'"; \
+	      $(MKDIR_P) "$(DESTDIR)$(methodsdir)/$$dir"; }; \
+	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(methodsdir)/$$dir'"; \
+	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(methodsdir)/$$dir" || exit $$?; }; \
+	done
+
+uninstall-nobase_dist_methodsDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_dist_methods_DATA)'; test -n "$(methodsdir)" || list=; \
+	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+	dir='$(DESTDIR)$(methodsdir)'; $(am__uninstall_files_from_dir)
+install-nobase_dist_perllibDATA: $(nobase_dist_perllib_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(perllibdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(perllibdir)" || exit 1; \
+	fi; \
+	$(am__nobase_list) | while read dir files; do \
+	  xfiles=; for file in $$files; do \
+	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+	  test -z "$$xfiles" || { \
+	    test "x$$dir" = x. || { \
+	      echo " $(MKDIR_P) '$(DESTDIR)$(perllibdir)/$$dir'"; \
+	      $(MKDIR_P) "$(DESTDIR)$(perllibdir)/$$dir"; }; \
+	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(perllibdir)/$$dir'"; \
+	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(perllibdir)/$$dir" || exit $$?; }; \
+	done
+
+uninstall-nobase_dist_perllibDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
+	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+	dir='$(DESTDIR)$(perllibdir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(SCRIPTS) $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(methodsdir)" "$(DESTDIR)$(perllibdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-nobase_dist_methodsDATA \
+	install-nobase_dist_methodsSCRIPTS \
+	install-nobase_dist_perllibDATA install-nobase_methodsSCRIPTS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-nobase_dist_methodsDATA \
+	uninstall-nobase_dist_methodsSCRIPTS \
+	uninstall-nobase_dist_perllibDATA \
+	uninstall-nobase_methodsSCRIPTS
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am \
+	install-data-local install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-nobase_dist_methodsDATA \
+	install-nobase_dist_methodsSCRIPTS \
+	install-nobase_dist_perllibDATA install-nobase_methodsSCRIPTS \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am \
+	uninstall-nobase_dist_methodsDATA \
+	uninstall-nobase_dist_methodsSCRIPTS \
+	uninstall-nobase_dist_perllibDATA \
+	uninstall-nobase_methodsSCRIPTS
+
+.PRECIOUS: Makefile
+
+
+.pl:
+	@test -d `dirname $@` || $(MKDIR_P) `dirname $@`
+	$(do_perl_subst) <$< >$@
+	$(AM_V_at) chmod +x $@
+
+install-data-local:
+	$(MKDIR_P) $(DESTDIR)$(admindir)/methods/mnt
+	$(MKDIR_P) $(DESTDIR)$(admindir)/methods/disk
+	$(MKDIR_P) $(DESTDIR)$(admindir)/methods/ftp
+	$(MKDIR_P) $(DESTDIR)$(admindir)/methods/multicd
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/boldquot.sed dpkg-1.20.7.1/dselect/po/boldquot.sed
--- dpkg-1.20.7.1-orig/dselect/po/boldquot.sed	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/boldquot.sed	2021-06-09 18:22:47.468275390 -0500
@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“[1m/g
+s/”/[0m”/g
+s/‘/‘[1m/g
+s/’/[0m’/g
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/en@boldquot.header dpkg-1.20.7.1/dselect/po/en@boldquot.header
--- dpkg-1.20.7.1-orig/dselect/po/en@boldquot.header	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/en@boldquot.header	2021-06-09 18:22:47.468275390 -0500
@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/en@quot.header dpkg-1.20.7.1/dselect/po/en@quot.header
--- dpkg-1.20.7.1-orig/dselect/po/en@quot.header	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/en@quot.header	2021-06-09 18:22:47.469275392 -0500
@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/insert-header.sin dpkg-1.20.7.1/dselect/po/insert-header.sin
--- dpkg-1.20.7.1-orig/dselect/po/insert-header.sin	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/insert-header.sin	2021-06-09 18:22:47.469275392 -0500
@@ -0,0 +1,28 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# Copyright (C) 2001 Free Software Foundation, Inc.
+# Written by Bruno Haible <bruno@clisp.org>, 2001.
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to use, copy, distribute, and modify it.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/Makefile dpkg-1.20.7.1/dselect/po/Makefile
--- dpkg-1.20.7.1-orig/dselect/po/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/Makefile	2021-06-09 18:24:52.101468545 -0500
@@ -0,0 +1,666 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 2000-2019 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# Origin: gettext-0.20
+GETTEXT_MACRO_VERSION = 0.20
+
+PACKAGE = dpkg
+VERSION = 1.20.7.1
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+
+SED = /bin/sed
+SHELL = /bin/sh
+
+
+srcdir = .
+top_srcdir = ../..
+
+
+prefix = /usr
+exec_prefix = ${prefix}
+datarootdir = ${prefix}/share
+datadir = ${datarootdir}
+localedir = ${datarootdir}/locale
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh does not start with $(SHELL), so we add it.
+# In automake >= 1.10, $(MKDIR_P) is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh -d
+install_sh = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+MKDIR_P = /bin/mkdir -p
+mkdir_p = $(MKDIR_P)
+
+# When building gettext-tools, we prefer to use the built programs
+# rather than installed programs.  However, we can't do that when we
+# are cross compiling.
+CROSS_COMPILING = @CROSS_COMPILING@
+
+GMSGFMT_ = /usr/bin/msgfmt
+GMSGFMT_no = /usr/bin/msgfmt
+GMSGFMT_yes = /usr/bin/msgfmt
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = /usr/bin/xgettext
+XGETTEXT_no = /usr/bin/xgettext
+XGETTEXT_yes = /usr/bin/xgettext
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_UPDATE = /usr/bin/msgmerge --update
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES =  bs.po ca.po cs.po da.po de.po el.po es.po et.po eu.po fr.po gl.po hu.po id.po it.po ja.po ko.po nb.po nl.po nn.po pl.po pt.po pt_BR.po ro.po ru.po sk.po sv.po tl.po vi.po zh_CN.po zh_TW.po
+GMOFILES =  bs.gmo ca.gmo cs.gmo da.gmo de.gmo el.gmo es.gmo et.gmo eu.gmo fr.gmo gl.gmo hu.gmo id.gmo it.gmo ja.gmo ko.gmo nb.gmo nl.gmo nn.gmo pl.gmo pt.gmo pt_BR.gmo ro.gmo ru.gmo sk.gmo sv.gmo tl.gmo vi.gmo zh_CN.gmo zh_TW.gmo
+UPDATEPOFILES =  bs.po-update ca.po-update cs.po-update da.po-update de.po-update el.po-update es.po-update et.po-update eu.po-update fr.po-update gl.po-update hu.po-update id.po-update it.po-update ja.po-update ko.po-update nb.po-update nl.po-update nn.po-update pl.po-update pt.po-update pt_BR.po-update ro.po-update ru.po-update sk.po-update sv.po-update tl.po-update vi.po-update zh_CN.po-update zh_TW.po-update
+DUMMYPOFILES =  bs.nop ca.nop cs.nop da.nop de.nop el.nop es.nop et.nop eu.nop fr.nop gl.nop hu.nop id.nop it.nop ja.nop ko.nop nb.nop nl.nop nn.nop pl.nop pt.nop pt_BR.nop ro.nop ru.nop sk.nop sv.nop tl.nop vi.nop zh_CN.nop zh_TW.nop
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+     ../../dselect/basecmds.cc \
+     ../../dselect/baselist.cc \
+     ../../dselect/basetop.cc \
+     ../../dselect/bindings.cc \
+     ../../dselect/curkeys.cc \
+     ../../dselect/helpmsgs.cc \
+     ../../dselect/main.cc \
+     ../../dselect/methkeys.cc \
+     ../../dselect/methlist.cc \
+     ../../dselect/method.cc \
+     ../../dselect/methparse.cc \
+     ../../dselect/pkgcmds.cc \
+     ../../dselect/pkgdepcon.cc \
+     ../../dselect/pkgdisplay.cc \
+     ../../dselect/pkginfo.cc \
+     ../../dselect/pkgkeys.cc \
+     ../../dselect/pkglist.cc \
+     ../../dselect/pkgsublist.cc \
+     ../../dselect/pkgtop.cc
+
+CATALOGS =  bs.gmo ca.gmo cs.gmo da.gmo de.gmo el.gmo es.gmo et.gmo eu.gmo fr.gmo gl.gmo hu.gmo id.gmo it.gmo ja.gmo ko.gmo nb.gmo nl.gmo nn.gmo pl.gmo pt.gmo pt_BR.gmo ro.gmo ru.gmo sk.gmo sv.gmo tl.gmo vi.gmo zh_CN.gmo zh_TW.gmo
+
+POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
+POFILESDEPS_yes = $(POFILESDEPS_)
+POFILESDEPS_no =
+POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
+
+DISTFILESDEPS_ = update-po
+DISTFILESDEPS_yes = $(DISTFILESDEPS_)
+DISTFILESDEPS_no =
+DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+# Makevars gets inserted here. (Don't remove this line!)
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = dselect
+
+# These two variables depend on the location of this directory.
+subdir = dselect/po
+top_builddir = ../..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --from-code=UTF-8 --add-location=file \
+                   --keyword --keyword=_ --keyword=N_ \
+                   --keyword=P_:1,2 --keyword=C_:1c,2
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
+# package.  (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.)  Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright.  The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Dpkg Developers
+
+# This tells whether or not to prepend "GNU " prefix to the package
+# name that gets inserted into the header of the $(DOMAIN).pot file.
+# Possible values are "yes", "no", or empty.  If it is empty, try to
+# detect it automatically by scanning the files in $(top_srcdir) for
+# "GNU packagename" string.
+PACKAGE_GNU = no
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+#   in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+#   understood.
+# - Strings which make invalid assumptions about notation of date, time or
+#   money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS = $(PACKAGE_BUGREPORT)
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used.  It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
+
+# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
+# context.  Possible values are "yes" and "no".  Set this to yes if the
+# package uses functions taking also a message context, like pgettext(), or
+# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
+USE_MSGCTXT = yes
+
+# These options get passed to msgmerge.
+# Useful options are in particular:
+#   --previous            to keep previous msgids of translated messages,
+#   --quiet               to reduce the verbosity.
+MSGMERGE_OPTIONS = --previous --add-location=file --quiet
+
+# These options get passed to msginit.
+# If you want to disable line wrapping when writing PO files, add
+# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and
+# MSGINIT_OPTIONS.
+MSGINIT_OPTIONS =
+
+# This tells whether or not to regenerate a PO file when $(DOMAIN).pot
+# has changed.  Possible values are "yes" and "no".  Set this to no if
+# the POT file is checked in the repository and the version control
+# program ignores timestamps.
+PO_DEPENDS_ON_POT = yes
+
+# This tells whether or not to forcibly update $(DOMAIN).pot and
+# regenerate PO files on "make dist".  Possible values are "yes" and
+# "no".  Set this to no if the POT file and PO files are maintained
+# externally.
+DIST_DEPENDS_ON_UPDATE_PO = yes
+
+DISTFILES.extra1 = ChangeLog.old
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update
+
+# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
+# The GNU Coding Standards say in
+# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
+#   "GNU distributions usually contain some files which are not source files
+#    ... . Since these files normally appear in the source directory, they
+#    should always appear in the source directory, not in the build directory.
+#    So Makefile rules to update them should put the updated files in the
+#    source directory."
+# Therefore we put these files in the source directory, not the build directory.
+
+# During .po -> .gmo conversion, take into account the most recent changes to
+# the .pot file. This eliminates the need to update the .po files when the
+# .pot file has changed, which would be troublesome if the .po files are put
+# under version control.
+.po.gmo: $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
+	cd $(srcdir) && \
+	rm -f $${lang}.gmo && \
+	$(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
+	$(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
+	mv t-$${lang}.gmo $${lang}.gmo && \
+	rm -f $${lang}.1po
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: all-yes
+
+all-yes: $(srcdir)/stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+	test "$(GETTEXT_MACRO_VERSION)" = "0.20" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.20" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).
+
+# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
+# have been loosely updated. Its purpose is that when a developer or translator
+# checks out the package from a version control system, and the $(DOMAIN).pot
+# file is not under version control, "make" will update the $(DOMAIN).pot and
+# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
+# timestamp would not be necessary if updating the $(CATALOGS) would always
+# touch them; however, the rule for $(POFILES) has been designed to not touch
+# files that don't need to be changed.
+$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
+	@$(CHECK_MACRO_VERSION)
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch $(srcdir)/stamp-po" && \
+	  echo timestamp > $(srcdir)/stamp-poT && \
+	  mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
+	}
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	package_gnu="$(PACKAGE_GNU)"; \
+	test -n "$$package_gnu" || { \
+	  if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+	         LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU dpkg' /dev/null '{}' ';' 2>/dev/null; \
+	       else \
+	         LC_ALL=C grep -i 'GNU dpkg' $(top_srcdir)/* 2>/dev/null; \
+	       fi; \
+	     } | grep -v 'libtool:' >/dev/null; then \
+	     package_gnu=yes; \
+	   else \
+	     package_gnu=no; \
+	   fi; \
+	}; \
+	if test "$$package_gnu" = "yes"; then \
+	  package_prefix='GNU '; \
+	else \
+	  package_prefix=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_prefix}dpkg" \
+	      --package-version='1.20.7.1' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	esac
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot-header; then \
+	    sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
+	    cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
+	    rm -f $(DOMAIN).1po \
+	    || exit 1; \
+	  fi; \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(POFILESDEPS)
+	@test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           0.1[6-7] | 0.1[6-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+install-dvi install-ps install-pdf install-html:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f $(srcdir)/stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(srcdir)/stamp-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir) || exit 1; \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       0.1[6-7] | 0.1[6-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use /bin/sh, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status POTFILES.in LINGUAS
+	cd $(top_builddir) \
+	  && /bin/sh ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+# Special Makefile rules for English message catalogs with quotation marks.
+#
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+# This file, Rules-quot, and its auxiliary files (listed under
+# DISTFILES.common.extra1) are free software; the Free Software Foundation
+# gives unlimited permission to use, copy, distribute, and modify them.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+	$(MAKE) en@quot.po-update
+en@boldquot.po-create:
+	$(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	ll=`echo $$lang | sed -e 's/@.*//'`; \
+	LC_ALL=C; export LC_ALL; \
+	cd $(srcdir); \
+	if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \
+	   | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \
+	   { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	     '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \
+	       $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \
+	       ;; \
+	     *) \
+	       $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \
+	       ;; \
+	     esac } 2>/dev/null > $$tmpdir/$$lang.new.po \
+	     ; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "creation of $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+en@quot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+	rm -f *.insert-header
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/Makefile.in dpkg-1.20.7.1/dselect/po/Makefile.in
--- dpkg-1.20.7.1-orig/dselect/po/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/Makefile.in	2021-06-09 18:24:51.880468208 -0500
@@ -0,0 +1,503 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 2000-2019 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# Origin: gettext-0.20
+GETTEXT_MACRO_VERSION = 0.20
+
+PACKAGE = dpkg
+VERSION = 1.20.7.1
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+
+SED = /bin/sed
+SHELL = /bin/sh
+
+
+srcdir = .
+top_srcdir = ../..
+
+
+prefix = /usr
+exec_prefix = ${prefix}
+datarootdir = ${prefix}/share
+datadir = ${datarootdir}
+localedir = ${datarootdir}/locale
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh does not start with $(SHELL), so we add it.
+# In automake >= 1.10, $(MKDIR_P) is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh -d
+install_sh = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+MKDIR_P = /bin/mkdir -p
+mkdir_p = $(MKDIR_P)
+
+# When building gettext-tools, we prefer to use the built programs
+# rather than installed programs.  However, we can't do that when we
+# are cross compiling.
+CROSS_COMPILING = @CROSS_COMPILING@
+
+GMSGFMT_ = /usr/bin/msgfmt
+GMSGFMT_no = /usr/bin/msgfmt
+GMSGFMT_yes = /usr/bin/msgfmt
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = /usr/bin/xgettext
+XGETTEXT_no = /usr/bin/xgettext
+XGETTEXT_yes = /usr/bin/xgettext
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_UPDATE = /usr/bin/msgmerge --update
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
+POFILESDEPS_yes = $(POFILESDEPS_)
+POFILESDEPS_no =
+POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
+
+DISTFILESDEPS_ = update-po
+DISTFILESDEPS_yes = $(DISTFILESDEPS_)
+DISTFILESDEPS_no =
+DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update
+
+# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
+# The GNU Coding Standards say in
+# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
+#   "GNU distributions usually contain some files which are not source files
+#    ... . Since these files normally appear in the source directory, they
+#    should always appear in the source directory, not in the build directory.
+#    So Makefile rules to update them should put the updated files in the
+#    source directory."
+# Therefore we put these files in the source directory, not the build directory.
+
+# During .po -> .gmo conversion, take into account the most recent changes to
+# the .pot file. This eliminates the need to update the .po files when the
+# .pot file has changed, which would be troublesome if the .po files are put
+# under version control.
+.po.gmo: $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
+	cd $(srcdir) && \
+	rm -f $${lang}.gmo && \
+	$(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
+	$(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
+	mv t-$${lang}.gmo $${lang}.gmo && \
+	rm -f $${lang}.1po
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: all-yes
+
+all-yes: $(srcdir)/stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+	test "$(GETTEXT_MACRO_VERSION)" = "0.20" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.20" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).
+
+# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
+# have been loosely updated. Its purpose is that when a developer or translator
+# checks out the package from a version control system, and the $(DOMAIN).pot
+# file is not under version control, "make" will update the $(DOMAIN).pot and
+# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
+# timestamp would not be necessary if updating the $(CATALOGS) would always
+# touch them; however, the rule for $(POFILES) has been designed to not touch
+# files that don't need to be changed.
+$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
+	@$(CHECK_MACRO_VERSION)
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch $(srcdir)/stamp-po" && \
+	  echo timestamp > $(srcdir)/stamp-poT && \
+	  mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
+	}
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	package_gnu="$(PACKAGE_GNU)"; \
+	test -n "$$package_gnu" || { \
+	  if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+	         LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU dpkg' /dev/null '{}' ';' 2>/dev/null; \
+	       else \
+	         LC_ALL=C grep -i 'GNU dpkg' $(top_srcdir)/* 2>/dev/null; \
+	       fi; \
+	     } | grep -v 'libtool:' >/dev/null; then \
+	     package_gnu=yes; \
+	   else \
+	     package_gnu=no; \
+	   fi; \
+	}; \
+	if test "$$package_gnu" = "yes"; then \
+	  package_prefix='GNU '; \
+	else \
+	  package_prefix=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_prefix}dpkg" \
+	      --package-version='1.20.7.1' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	esac
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot-header; then \
+	    sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
+	    cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
+	    rm -f $(DOMAIN).1po \
+	    || exit 1; \
+	  fi; \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(POFILESDEPS)
+	@test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           0.1[6-7] | 0.1[6-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+install-dvi install-ps install-pdf install-html:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f $(srcdir)/stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(srcdir)/stamp-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir) || exit 1; \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       0.1[6-7] | 0.1[6-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use /bin/sh, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+	cd $(top_builddir) \
+	  && /bin/sh ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/Makefile.in.in dpkg-1.20.7.1/dselect/po/Makefile.in.in
--- dpkg-1.20.7.1-orig/dselect/po/Makefile.in.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/Makefile.in.in	2021-06-09 18:22:47.469275392 -0500
@@ -0,0 +1,503 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 2000-2019 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# Origin: gettext-0.20
+GETTEXT_MACRO_VERSION = 0.20
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SED = @SED@
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @localedir@
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# @install_sh@ does not start with $(SHELL), so we add it.
+# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+mkdir_p = @mkdir_p@
+
+# When building gettext-tools, we prefer to use the built programs
+# rather than installed programs.  However, we can't do that when we
+# are cross compiling.
+CROSS_COMPILING = @CROSS_COMPILING@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = @MSGMERGE@
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
+POFILESDEPS_yes = $(POFILESDEPS_)
+POFILESDEPS_no =
+POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
+
+DISTFILESDEPS_ = update-po
+DISTFILESDEPS_yes = $(DISTFILESDEPS_)
+DISTFILESDEPS_no =
+DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update
+
+# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
+# The GNU Coding Standards say in
+# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
+#   "GNU distributions usually contain some files which are not source files
+#    ... . Since these files normally appear in the source directory, they
+#    should always appear in the source directory, not in the build directory.
+#    So Makefile rules to update them should put the updated files in the
+#    source directory."
+# Therefore we put these files in the source directory, not the build directory.
+
+# During .po -> .gmo conversion, take into account the most recent changes to
+# the .pot file. This eliminates the need to update the .po files when the
+# .pot file has changed, which would be troublesome if the .po files are put
+# under version control.
+.po.gmo: $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
+	cd $(srcdir) && \
+	rm -f $${lang}.gmo && \
+	$(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
+	$(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
+	mv t-$${lang}.gmo $${lang}.gmo && \
+	rm -f $${lang}.1po
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: all-@USE_NLS@
+
+all-yes: $(srcdir)/stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+	test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).
+
+# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
+# have been loosely updated. Its purpose is that when a developer or translator
+# checks out the package from a version control system, and the $(DOMAIN).pot
+# file is not under version control, "make" will update the $(DOMAIN).pot and
+# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
+# timestamp would not be necessary if updating the $(CATALOGS) would always
+# touch them; however, the rule for $(POFILES) has been designed to not touch
+# files that don't need to be changed.
+$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
+	@$(CHECK_MACRO_VERSION)
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch $(srcdir)/stamp-po" && \
+	  echo timestamp > $(srcdir)/stamp-poT && \
+	  mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
+	}
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	package_gnu="$(PACKAGE_GNU)"; \
+	test -n "$$package_gnu" || { \
+	  if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+	         LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \
+	       else \
+	         LC_ALL=C grep -i 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
+	       fi; \
+	     } | grep -v 'libtool:' >/dev/null; then \
+	     package_gnu=yes; \
+	   else \
+	     package_gnu=no; \
+	   fi; \
+	}; \
+	if test "$$package_gnu" = "yes"; then \
+	  package_prefix='GNU '; \
+	else \
+	  package_prefix=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_prefix}@PACKAGE@" \
+	      --package-version='@VERSION@' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	    ;; \
+	esac
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot-header; then \
+	    sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
+	    cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
+	    rm -f $(DOMAIN).1po \
+	    || exit 1; \
+	  fi; \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(POFILESDEPS)
+	@test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           0.1[6-7] | 0.1[6-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+install-dvi install-ps install-pdf install-html:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f $(srcdir)/stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(srcdir)/stamp-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir) || exit 1; \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       0.1[6-7] | 0.1[6-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use @SHELL@, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+	cd $(top_builddir) \
+	  && @SHELL@ ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/Makevars.template dpkg-1.20.7.1/dselect/po/Makevars.template
--- dpkg-1.20.7.1-orig/dselect/po/Makevars.template	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/Makevars.template	2021-06-09 18:22:47.469275392 -0500
@@ -0,0 +1,82 @@
+# Makefile variables for PO directory in any package using GNU gettext.
+#
+# Copyright (C) 2003-2019 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to use, copy, distribute, and modify it.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
+# package.  (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.)  Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright.  The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This tells whether or not to prepend "GNU " prefix to the package
+# name that gets inserted into the header of the $(DOMAIN).pot file.
+# Possible values are "yes", "no", or empty.  If it is empty, try to
+# detect it automatically by scanning the files in $(top_srcdir) for
+# "GNU packagename" string.
+PACKAGE_GNU =
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+#   in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+#   understood.
+# - Strings which make invalid assumptions about notation of date, time or
+#   money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS =
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used.  It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
+
+# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
+# context.  Possible values are "yes" and "no".  Set this to yes if the
+# package uses functions taking also a message context, like pgettext(), or
+# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
+USE_MSGCTXT = no
+
+# These options get passed to msgmerge.
+# Useful options are in particular:
+#   --previous            to keep previous msgids of translated messages,
+#   --quiet               to reduce the verbosity.
+MSGMERGE_OPTIONS =
+
+# These options get passed to msginit.
+# If you want to disable line wrapping when writing PO files, add
+# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and
+# MSGINIT_OPTIONS.
+MSGINIT_OPTIONS =
+
+# This tells whether or not to regenerate a PO file when $(DOMAIN).pot
+# has changed.  Possible values are "yes" and "no".  Set this to no if
+# the POT file is checked in the repository and the version control
+# program ignores timestamps.
+PO_DEPENDS_ON_POT = yes
+
+# This tells whether or not to forcibly update $(DOMAIN).pot and
+# regenerate PO files on "make dist".  Possible values are "yes" and
+# "no".  Set this to no if the POT file and PO files are maintained
+# externally.
+DIST_DEPENDS_ON_UPDATE_PO = yes
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/POTFILES dpkg-1.20.7.1/dselect/po/POTFILES
--- dpkg-1.20.7.1-orig/dselect/po/POTFILES	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/POTFILES	2021-06-09 18:24:52.096468537 -0500
@@ -0,0 +1,19 @@
+     ../../dselect/basecmds.cc \
+     ../../dselect/baselist.cc \
+     ../../dselect/basetop.cc \
+     ../../dselect/bindings.cc \
+     ../../dselect/curkeys.cc \
+     ../../dselect/helpmsgs.cc \
+     ../../dselect/main.cc \
+     ../../dselect/methkeys.cc \
+     ../../dselect/methlist.cc \
+     ../../dselect/method.cc \
+     ../../dselect/methparse.cc \
+     ../../dselect/pkgcmds.cc \
+     ../../dselect/pkgdepcon.cc \
+     ../../dselect/pkgdisplay.cc \
+     ../../dselect/pkginfo.cc \
+     ../../dselect/pkgkeys.cc \
+     ../../dselect/pkglist.cc \
+     ../../dselect/pkgsublist.cc \
+     ../../dselect/pkgtop.cc
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/quot.sed dpkg-1.20.7.1/dselect/po/quot.sed
--- dpkg-1.20.7.1-orig/dselect/po/quot.sed	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/quot.sed	2021-06-09 18:22:47.469275392 -0500
@@ -0,0 +1,6 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/remove-potcdate.sin dpkg-1.20.7.1/dselect/po/remove-potcdate.sin
--- dpkg-1.20.7.1-orig/dselect/po/remove-potcdate.sin	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/remove-potcdate.sin	2021-06-09 18:22:47.469275392 -0500
@@ -0,0 +1,25 @@
+# Sed script that removes the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# Copyright (C) 2002 Free Software Foundation, Inc.
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff -Naurp dpkg-1.20.7.1-orig/dselect/po/Rules-quot dpkg-1.20.7.1/dselect/po/Rules-quot
--- dpkg-1.20.7.1-orig/dselect/po/Rules-quot	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/dselect/po/Rules-quot	2021-06-09 18:22:47.469275392 -0500
@@ -0,0 +1,62 @@
+# Special Makefile rules for English message catalogs with quotation marks.
+#
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+# This file, Rules-quot, and its auxiliary files (listed under
+# DISTFILES.common.extra1) are free software; the Free Software Foundation
+# gives unlimited permission to use, copy, distribute, and modify them.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+	$(MAKE) en@quot.po-update
+en@boldquot.po-create:
+	$(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	ll=`echo $$lang | sed -e 's/@.*//'`; \
+	LC_ALL=C; export LC_ALL; \
+	cd $(srcdir); \
+	if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \
+	   | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \
+	   { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	     '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \
+	       $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \
+	       ;; \
+	     *) \
+	       $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \
+	       ;; \
+	     esac } 2>/dev/null > $$tmpdir/$$lang.new.po \
+	     ; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "creation of $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+en@quot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+	rm -f *.insert-header
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/alphasort.Plo dpkg-1.20.7.1/lib/compat/.deps/alphasort.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/alphasort.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/alphasort.Plo	2021-06-09 18:23:51.468375533 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/asprintf.Plo dpkg-1.20.7.1/lib/compat/.deps/asprintf.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/asprintf.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/asprintf.Plo	2021-06-09 18:23:51.470375536 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/empty.Plo dpkg-1.20.7.1/lib/compat/.deps/empty.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/empty.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/empty.Plo	2021-06-09 18:24:55.680474007 -0500
@@ -0,0 +1,3 @@
+empty.lo: empty.c /usr/include/stdc-predef.h
+
+/usr/include/stdc-predef.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/getopt1.Plo dpkg-1.20.7.1/lib/compat/.deps/getopt1.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/getopt1.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/getopt1.Plo	2021-06-09 18:23:51.474375543 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/getopt.Plo dpkg-1.20.7.1/lib/compat/.deps/getopt.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/getopt.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/getopt.Plo	2021-06-09 18:23:51.472375540 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-alphasort.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-alphasort.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-alphasort.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-alphasort.Plo	2021-06-09 18:24:55.248473348 -0500
@@ -0,0 +1,64 @@
+libcompat_test_la-alphasort.lo: alphasort.c /usr/include/stdc-predef.h \
+ ../../config.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/dirent.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/dirent.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-asprintf.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-asprintf.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-asprintf.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-asprintf.Plo	2021-06-09 18:24:55.083473096 -0500
@@ -0,0 +1,79 @@
+libcompat_test_la-asprintf.lo: asprintf.c /usr/include/stdc-predef.h \
+ ../../config.h /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/stdio.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h compat.h /usr/include/string.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-md5.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-md5.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-md5.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-md5.Plo	2021-06-09 18:24:54.504472211 -0500
@@ -0,0 +1,114 @@
+libcompat_test_la-md5.lo: md5.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/sys/types.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h md5.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+md5.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-scandir.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-scandir.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-scandir.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-scandir.Plo	2021-06-09 18:24:55.345473496 -0500
@@ -0,0 +1,133 @@
+libcompat_test_la-scandir.lo: scandir.c /usr/include/stdc-predef.h \
+ ../../config.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ /usr/include/dirent.h /usr/include/bits/dirent.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-selinux.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-selinux.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-selinux.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-selinux.Plo	2021-06-09 18:23:51.480375552 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-snprintf.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-snprintf.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-snprintf.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-snprintf.Plo	2021-06-09 18:24:54.910472832 -0500
@@ -0,0 +1,79 @@
+libcompat_test_la-snprintf.lo: snprintf.c /usr/include/stdc-predef.h \
+ ../../config.h /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/stdio.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h compat.h /usr/include/string.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-strchrnul.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-strchrnul.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-strchrnul.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-strchrnul.Plo	2021-06-09 18:24:54.588472341 -0500
@@ -0,0 +1,120 @@
+libcompat_test_la-strchrnul.lo: strchrnul.c /usr/include/stdc-predef.h \
+ ../../config.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ compat.h /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-strerror.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-strerror.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-strerror.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-strerror.Plo	2021-06-09 18:24:55.510473748 -0500
@@ -0,0 +1,106 @@
+libcompat_test_la-strerror.lo: strerror.c /usr/include/stdc-predef.h \
+ ../../config.h /usr/include/errno.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/stdio.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/string.h /usr/include/strings.h compat.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+/usr/include/errno.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+compat.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-strndup.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-strndup.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-strndup.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-strndup.Plo	2021-06-09 18:24:54.747472583 -0500
@@ -0,0 +1,120 @@
+libcompat_test_la-strndup.lo: strndup.c /usr/include/stdc-predef.h \
+ ../../config.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ compat.h /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-strnlen.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-strnlen.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-strnlen.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-strnlen.Plo	2021-06-09 18:24:54.665472458 -0500
@@ -0,0 +1,42 @@
+libcompat_test_la-strnlen.lo: strnlen.c /usr/include/stdc-predef.h \
+ ../../config.h compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-strsignal.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-strsignal.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-strsignal.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-strsignal.Plo	2021-06-09 18:24:54.830472710 -0500
@@ -0,0 +1,157 @@
+libcompat_test_la-strsignal.lo: strsignal.c /usr/include/stdc-predef.h \
+ ../../config.h /usr/include/signal.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/stack_t.h /usr/include/sys/ucontext.h \
+ /usr/include/bits/sigstack.h /usr/include/bits/ss_flags.h \
+ /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/bits/sigthread.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ compat.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+/usr/include/signal.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+compat.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-unsetenv.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-unsetenv.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-unsetenv.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-unsetenv.Plo	2021-06-09 18:24:55.428473623 -0500
@@ -0,0 +1,120 @@
+libcompat_test_la-unsetenv.lo: unsetenv.c /usr/include/stdc-predef.h \
+ ../../config.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ compat.h /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-vasprintf.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-vasprintf.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-vasprintf.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-vasprintf.Plo	2021-06-09 18:24:55.170473229 -0500
@@ -0,0 +1,147 @@
+libcompat_test_la-vasprintf.lo: vasprintf.c /usr/include/stdc-predef.h \
+ ../../config.h /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/stdio.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ compat.h /usr/include/string.h /usr/include/strings.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+compat.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-vsnprintf.Plo dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-vsnprintf.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/libcompat_test_la-vsnprintf.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/libcompat_test_la-vsnprintf.Plo	2021-06-09 18:24:55.002472972 -0500
@@ -0,0 +1,144 @@
+libcompat_test_la-vsnprintf.lo: vsnprintf.c /usr/include/stdc-predef.h \
+ ../../config.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/stdio.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h compat.h /usr/include/string.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/md5.Plo dpkg-1.20.7.1/lib/compat/.deps/md5.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/md5.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/md5.Plo	2021-06-09 18:24:55.827474232 -0500
@@ -0,0 +1,110 @@
+md5.lo: md5.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h md5.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+md5.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/obstack.Plo dpkg-1.20.7.1/lib/compat/.deps/obstack.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/obstack.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/obstack.Plo	2021-06-09 18:23:51.495375575 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/scandir.Plo dpkg-1.20.7.1/lib/compat/.deps/scandir.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/scandir.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/scandir.Plo	2021-06-09 18:23:51.496375577 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/selinux.Plo dpkg-1.20.7.1/lib/compat/.deps/selinux.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/selinux.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/selinux.Plo	2021-06-09 18:23:51.497375579 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/snprintf.Plo dpkg-1.20.7.1/lib/compat/.deps/snprintf.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/snprintf.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/snprintf.Plo	2021-06-09 18:23:51.499375582 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/strchrnul.Plo dpkg-1.20.7.1/lib/compat/.deps/strchrnul.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/strchrnul.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/strchrnul.Plo	2021-06-09 18:23:51.500375583 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/strerror.Plo dpkg-1.20.7.1/lib/compat/.deps/strerror.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/strerror.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/strerror.Plo	2021-06-09 18:23:51.501375585 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/strndup.Plo dpkg-1.20.7.1/lib/compat/.deps/strndup.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/strndup.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/strndup.Plo	2021-06-09 18:23:51.503375588 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/strnlen.Plo dpkg-1.20.7.1/lib/compat/.deps/strnlen.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/strnlen.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/strnlen.Plo	2021-06-09 18:23:51.504375590 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/strsignal.Plo dpkg-1.20.7.1/lib/compat/.deps/strsignal.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/strsignal.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/strsignal.Plo	2021-06-09 18:23:51.505375591 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/unsetenv.Plo dpkg-1.20.7.1/lib/compat/.deps/unsetenv.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/unsetenv.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/unsetenv.Plo	2021-06-09 18:23:51.507375594 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/vasprintf.Plo dpkg-1.20.7.1/lib/compat/.deps/vasprintf.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/vasprintf.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/vasprintf.Plo	2021-06-09 18:23:51.508375596 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/.deps/vsnprintf.Plo dpkg-1.20.7.1/lib/compat/.deps/vsnprintf.Plo
--- dpkg-1.20.7.1-orig/lib/compat/.deps/vsnprintf.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/.deps/vsnprintf.Plo	2021-06-09 18:23:51.509375598 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/Makefile dpkg-1.20.7.1/lib/compat/Makefile
--- dpkg-1.20.7.1-orig/lib/compat/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/Makefile	2021-06-09 18:24:51.898468235 -0500
@@ -0,0 +1,962 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# lib/compat/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+am__append_1 = strerror.c
+#am__append_2 = selinux.c
+am__append_3 = md5.c md5.h
+#am__append_4 = getopt.c getopt.h
+#am__append_5 = getopt.c getopt.h
+#am__append_6 = getopt1.c
+#am__append_7 = obstack.c obstack.h
+#am__append_8 = strnlen.c
+#am__append_9 = strchrnul.c
+#am__append_10 = strndup.c
+#am__append_11 = strerror.c
+#am__append_12 = strsignal.c
+#am__append_13 = selinux.c
+#am__append_14 = snprintf.c vsnprintf.c
+#am__append_15 = asprintf.c vasprintf.c
+#am__append_16 = alphasort.c
+#am__append_17 = scandir.c
+#am__append_18 = unsetenv.c
+subdir = lib/compat
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LTLIBRARIES = $(noinst_LTLIBRARIES)
+libcompat_test_la_LIBADD =
+am__libcompat_test_la_SOURCES_DIST = compat.h md5.c md5.h strchrnul.c \
+	strnlen.c strndup.c strsignal.c snprintf.c vsnprintf.c \
+	asprintf.c vasprintf.c alphasort.c scandir.c unsetenv.c \
+	strerror.c selinux.c
+am__objects_1 = libcompat_test_la-strerror.lo
+#am__objects_2 = libcompat_test_la-selinux.lo
+am_libcompat_test_la_OBJECTS = libcompat_test_la-md5.lo \
+	libcompat_test_la-strchrnul.lo libcompat_test_la-strnlen.lo \
+	libcompat_test_la-strndup.lo libcompat_test_la-strsignal.lo \
+	libcompat_test_la-snprintf.lo libcompat_test_la-vsnprintf.lo \
+	libcompat_test_la-asprintf.lo libcompat_test_la-vasprintf.lo \
+	libcompat_test_la-alphasort.lo libcompat_test_la-scandir.lo \
+	libcompat_test_la-unsetenv.lo $(am__objects_1) \
+	$(am__objects_2)
+libcompat_test_la_OBJECTS = $(am_libcompat_test_la_OBJECTS)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+libcompat_la_LIBADD =
+am__libcompat_la_SOURCES_DIST = empty.c compat.h gettext.h md5.c md5.h \
+	getopt.c getopt.h getopt1.c obstack.c obstack.h strnlen.c \
+	strchrnul.c strndup.c strerror.c strsignal.c selinux.c \
+	snprintf.c vsnprintf.c asprintf.c vasprintf.c alphasort.c \
+	scandir.c unsetenv.c
+am__objects_3 = md5.lo
+#am__objects_4 = getopt.lo
+#am__objects_5 = getopt.lo
+#am__objects_6 = getopt1.lo
+#am__objects_7 = obstack.lo
+#am__objects_8 = strnlen.lo
+#am__objects_9 = strchrnul.lo
+#am__objects_10 = strndup.lo
+#am__objects_11 = strerror.lo
+#am__objects_12 = strsignal.lo
+#am__objects_13 =  \
+#	selinux.lo
+#am__objects_14 = snprintf.lo vsnprintf.lo
+#am__objects_15 = asprintf.lo vasprintf.lo
+#am__objects_16 = alphasort.lo
+#am__objects_17 = scandir.lo
+#am__objects_18 = unsetenv.lo
+am_libcompat_la_OBJECTS = empty.lo $(am__objects_3) $(am__objects_4) \
+	$(am__objects_5) $(am__objects_6) $(am__objects_7) \
+	$(am__objects_8) $(am__objects_9) $(am__objects_10) \
+	$(am__objects_11) $(am__objects_12) $(am__objects_13) \
+	$(am__objects_14) $(am__objects_15) $(am__objects_16) \
+	$(am__objects_17) $(am__objects_18)
+libcompat_la_OBJECTS = $(am_libcompat_la_OBJECTS)
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/alphasort.Plo \
+	./$(DEPDIR)/asprintf.Plo ./$(DEPDIR)/empty.Plo \
+	./$(DEPDIR)/getopt.Plo ./$(DEPDIR)/getopt1.Plo \
+	./$(DEPDIR)/libcompat_test_la-alphasort.Plo \
+	./$(DEPDIR)/libcompat_test_la-asprintf.Plo \
+	./$(DEPDIR)/libcompat_test_la-md5.Plo \
+	./$(DEPDIR)/libcompat_test_la-scandir.Plo \
+	./$(DEPDIR)/libcompat_test_la-selinux.Plo \
+	./$(DEPDIR)/libcompat_test_la-snprintf.Plo \
+	./$(DEPDIR)/libcompat_test_la-strchrnul.Plo \
+	./$(DEPDIR)/libcompat_test_la-strerror.Plo \
+	./$(DEPDIR)/libcompat_test_la-strndup.Plo \
+	./$(DEPDIR)/libcompat_test_la-strnlen.Plo \
+	./$(DEPDIR)/libcompat_test_la-strsignal.Plo \
+	./$(DEPDIR)/libcompat_test_la-unsetenv.Plo \
+	./$(DEPDIR)/libcompat_test_la-vasprintf.Plo \
+	./$(DEPDIR)/libcompat_test_la-vsnprintf.Plo \
+	./$(DEPDIR)/md5.Plo ./$(DEPDIR)/obstack.Plo \
+	./$(DEPDIR)/scandir.Plo ./$(DEPDIR)/selinux.Plo \
+	./$(DEPDIR)/snprintf.Plo ./$(DEPDIR)/strchrnul.Plo \
+	./$(DEPDIR)/strerror.Plo ./$(DEPDIR)/strndup.Plo \
+	./$(DEPDIR)/strnlen.Plo ./$(DEPDIR)/strsignal.Plo \
+	./$(DEPDIR)/unsetenv.Plo ./$(DEPDIR)/vasprintf.Plo \
+	./$(DEPDIR)/vsnprintf.Plo
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libcompat_test_la_SOURCES) $(libcompat_la_SOURCES)
+DIST_SOURCES = $(am__libcompat_test_la_SOURCES_DIST) \
+	$(am__libcompat_la_SOURCES_DIST)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/lib/compat
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/lib/compat
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../../
+top_builddir = ../..
+top_srcdir = ../..
+AM_CPPFLAGS = \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir)
+
+noinst_LTLIBRARIES = libcompat-test.la libcompat.la
+libcompat_test_la_CPPFLAGS = $(AM_CPPFLAGS) -DTEST_LIBCOMPAT=1
+libcompat_test_la_SOURCES = compat.h md5.c md5.h strchrnul.c strnlen.c \
+	strndup.c strsignal.c snprintf.c vsnprintf.c asprintf.c \
+	vasprintf.c alphasort.c scandir.c unsetenv.c $(am__append_1) \
+	$(am__append_2)
+libcompat_la_SOURCES = empty.c compat.h gettext.h $(am__append_3) \
+	$(am__append_4) $(am__append_5) $(am__append_6) \
+	$(am__append_7) $(am__append_8) $(am__append_9) \
+	$(am__append_10) $(am__append_11) $(am__append_12) \
+	$(am__append_13) $(am__append_14) $(am__append_15) \
+	$(am__append_16) $(am__append_17) $(am__append_18)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/compat/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign lib/compat/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
+libcompat-test.la: $(libcompat_test_la_OBJECTS) $(libcompat_test_la_DEPENDENCIES) $(EXTRA_libcompat_test_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK)  $(libcompat_test_la_OBJECTS) $(libcompat_test_la_LIBADD) $(LIBS)
+
+libcompat.la: $(libcompat_la_OBJECTS) $(libcompat_la_DEPENDENCIES) $(EXTRA_libcompat_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK)  $(libcompat_la_OBJECTS) $(libcompat_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/alphasort.Plo # am--include-marker
+include ./$(DEPDIR)/asprintf.Plo # am--include-marker
+include ./$(DEPDIR)/empty.Plo # am--include-marker
+include ./$(DEPDIR)/getopt.Plo # am--include-marker
+include ./$(DEPDIR)/getopt1.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-alphasort.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-asprintf.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-md5.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-scandir.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-selinux.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-snprintf.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-strchrnul.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-strerror.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-strndup.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-strnlen.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-strsignal.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-unsetenv.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-vasprintf.Plo # am--include-marker
+include ./$(DEPDIR)/libcompat_test_la-vsnprintf.Plo # am--include-marker
+include ./$(DEPDIR)/md5.Plo # am--include-marker
+include ./$(DEPDIR)/obstack.Plo # am--include-marker
+include ./$(DEPDIR)/scandir.Plo # am--include-marker
+include ./$(DEPDIR)/selinux.Plo # am--include-marker
+include ./$(DEPDIR)/snprintf.Plo # am--include-marker
+include ./$(DEPDIR)/strchrnul.Plo # am--include-marker
+include ./$(DEPDIR)/strerror.Plo # am--include-marker
+include ./$(DEPDIR)/strndup.Plo # am--include-marker
+include ./$(DEPDIR)/strnlen.Plo # am--include-marker
+include ./$(DEPDIR)/strsignal.Plo # am--include-marker
+include ./$(DEPDIR)/unsetenv.Plo # am--include-marker
+include ./$(DEPDIR)/vasprintf.Plo # am--include-marker
+include ./$(DEPDIR)/vsnprintf.Plo # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	$(AM_V_CC)source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $<
+
+libcompat_test_la-md5.lo: md5.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-md5.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-md5.Tpo -c -o libcompat_test_la-md5.lo `test -f 'md5.c' || echo '$(srcdir)/'`md5.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-md5.Tpo $(DEPDIR)/libcompat_test_la-md5.Plo
+#	$(AM_V_CC)source='md5.c' object='libcompat_test_la-md5.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-md5.lo `test -f 'md5.c' || echo '$(srcdir)/'`md5.c
+
+libcompat_test_la-strchrnul.lo: strchrnul.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-strchrnul.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-strchrnul.Tpo -c -o libcompat_test_la-strchrnul.lo `test -f 'strchrnul.c' || echo '$(srcdir)/'`strchrnul.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-strchrnul.Tpo $(DEPDIR)/libcompat_test_la-strchrnul.Plo
+#	$(AM_V_CC)source='strchrnul.c' object='libcompat_test_la-strchrnul.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-strchrnul.lo `test -f 'strchrnul.c' || echo '$(srcdir)/'`strchrnul.c
+
+libcompat_test_la-strnlen.lo: strnlen.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-strnlen.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-strnlen.Tpo -c -o libcompat_test_la-strnlen.lo `test -f 'strnlen.c' || echo '$(srcdir)/'`strnlen.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-strnlen.Tpo $(DEPDIR)/libcompat_test_la-strnlen.Plo
+#	$(AM_V_CC)source='strnlen.c' object='libcompat_test_la-strnlen.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-strnlen.lo `test -f 'strnlen.c' || echo '$(srcdir)/'`strnlen.c
+
+libcompat_test_la-strndup.lo: strndup.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-strndup.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-strndup.Tpo -c -o libcompat_test_la-strndup.lo `test -f 'strndup.c' || echo '$(srcdir)/'`strndup.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-strndup.Tpo $(DEPDIR)/libcompat_test_la-strndup.Plo
+#	$(AM_V_CC)source='strndup.c' object='libcompat_test_la-strndup.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-strndup.lo `test -f 'strndup.c' || echo '$(srcdir)/'`strndup.c
+
+libcompat_test_la-strsignal.lo: strsignal.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-strsignal.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-strsignal.Tpo -c -o libcompat_test_la-strsignal.lo `test -f 'strsignal.c' || echo '$(srcdir)/'`strsignal.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-strsignal.Tpo $(DEPDIR)/libcompat_test_la-strsignal.Plo
+#	$(AM_V_CC)source='strsignal.c' object='libcompat_test_la-strsignal.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-strsignal.lo `test -f 'strsignal.c' || echo '$(srcdir)/'`strsignal.c
+
+libcompat_test_la-snprintf.lo: snprintf.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-snprintf.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-snprintf.Tpo -c -o libcompat_test_la-snprintf.lo `test -f 'snprintf.c' || echo '$(srcdir)/'`snprintf.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-snprintf.Tpo $(DEPDIR)/libcompat_test_la-snprintf.Plo
+#	$(AM_V_CC)source='snprintf.c' object='libcompat_test_la-snprintf.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-snprintf.lo `test -f 'snprintf.c' || echo '$(srcdir)/'`snprintf.c
+
+libcompat_test_la-vsnprintf.lo: vsnprintf.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-vsnprintf.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-vsnprintf.Tpo -c -o libcompat_test_la-vsnprintf.lo `test -f 'vsnprintf.c' || echo '$(srcdir)/'`vsnprintf.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-vsnprintf.Tpo $(DEPDIR)/libcompat_test_la-vsnprintf.Plo
+#	$(AM_V_CC)source='vsnprintf.c' object='libcompat_test_la-vsnprintf.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-vsnprintf.lo `test -f 'vsnprintf.c' || echo '$(srcdir)/'`vsnprintf.c
+
+libcompat_test_la-asprintf.lo: asprintf.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-asprintf.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-asprintf.Tpo -c -o libcompat_test_la-asprintf.lo `test -f 'asprintf.c' || echo '$(srcdir)/'`asprintf.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-asprintf.Tpo $(DEPDIR)/libcompat_test_la-asprintf.Plo
+#	$(AM_V_CC)source='asprintf.c' object='libcompat_test_la-asprintf.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-asprintf.lo `test -f 'asprintf.c' || echo '$(srcdir)/'`asprintf.c
+
+libcompat_test_la-vasprintf.lo: vasprintf.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-vasprintf.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-vasprintf.Tpo -c -o libcompat_test_la-vasprintf.lo `test -f 'vasprintf.c' || echo '$(srcdir)/'`vasprintf.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-vasprintf.Tpo $(DEPDIR)/libcompat_test_la-vasprintf.Plo
+#	$(AM_V_CC)source='vasprintf.c' object='libcompat_test_la-vasprintf.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-vasprintf.lo `test -f 'vasprintf.c' || echo '$(srcdir)/'`vasprintf.c
+
+libcompat_test_la-alphasort.lo: alphasort.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-alphasort.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-alphasort.Tpo -c -o libcompat_test_la-alphasort.lo `test -f 'alphasort.c' || echo '$(srcdir)/'`alphasort.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-alphasort.Tpo $(DEPDIR)/libcompat_test_la-alphasort.Plo
+#	$(AM_V_CC)source='alphasort.c' object='libcompat_test_la-alphasort.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-alphasort.lo `test -f 'alphasort.c' || echo '$(srcdir)/'`alphasort.c
+
+libcompat_test_la-scandir.lo: scandir.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-scandir.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-scandir.Tpo -c -o libcompat_test_la-scandir.lo `test -f 'scandir.c' || echo '$(srcdir)/'`scandir.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-scandir.Tpo $(DEPDIR)/libcompat_test_la-scandir.Plo
+#	$(AM_V_CC)source='scandir.c' object='libcompat_test_la-scandir.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-scandir.lo `test -f 'scandir.c' || echo '$(srcdir)/'`scandir.c
+
+libcompat_test_la-unsetenv.lo: unsetenv.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-unsetenv.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-unsetenv.Tpo -c -o libcompat_test_la-unsetenv.lo `test -f 'unsetenv.c' || echo '$(srcdir)/'`unsetenv.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-unsetenv.Tpo $(DEPDIR)/libcompat_test_la-unsetenv.Plo
+#	$(AM_V_CC)source='unsetenv.c' object='libcompat_test_la-unsetenv.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-unsetenv.lo `test -f 'unsetenv.c' || echo '$(srcdir)/'`unsetenv.c
+
+libcompat_test_la-strerror.lo: strerror.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-strerror.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-strerror.Tpo -c -o libcompat_test_la-strerror.lo `test -f 'strerror.c' || echo '$(srcdir)/'`strerror.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-strerror.Tpo $(DEPDIR)/libcompat_test_la-strerror.Plo
+#	$(AM_V_CC)source='strerror.c' object='libcompat_test_la-strerror.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-strerror.lo `test -f 'strerror.c' || echo '$(srcdir)/'`strerror.c
+
+libcompat_test_la-selinux.lo: selinux.c
+	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-selinux.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-selinux.Tpo -c -o libcompat_test_la-selinux.lo `test -f 'selinux.c' || echo '$(srcdir)/'`selinux.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-selinux.Tpo $(DEPDIR)/libcompat_test_la-selinux.Plo
+#	$(AM_V_CC)source='selinux.c' object='libcompat_test_la-selinux.lo' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-selinux.lo `test -f 'selinux.c' || echo '$(srcdir)/'`selinux.c
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
+	mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/alphasort.Plo
+	-rm -f ./$(DEPDIR)/asprintf.Plo
+	-rm -f ./$(DEPDIR)/empty.Plo
+	-rm -f ./$(DEPDIR)/getopt.Plo
+	-rm -f ./$(DEPDIR)/getopt1.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-alphasort.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-asprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-md5.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-scandir.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-selinux.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-snprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strchrnul.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strerror.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strndup.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strnlen.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strsignal.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-unsetenv.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-vasprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-vsnprintf.Plo
+	-rm -f ./$(DEPDIR)/md5.Plo
+	-rm -f ./$(DEPDIR)/obstack.Plo
+	-rm -f ./$(DEPDIR)/scandir.Plo
+	-rm -f ./$(DEPDIR)/selinux.Plo
+	-rm -f ./$(DEPDIR)/snprintf.Plo
+	-rm -f ./$(DEPDIR)/strchrnul.Plo
+	-rm -f ./$(DEPDIR)/strerror.Plo
+	-rm -f ./$(DEPDIR)/strndup.Plo
+	-rm -f ./$(DEPDIR)/strnlen.Plo
+	-rm -f ./$(DEPDIR)/strsignal.Plo
+	-rm -f ./$(DEPDIR)/unsetenv.Plo
+	-rm -f ./$(DEPDIR)/vasprintf.Plo
+	-rm -f ./$(DEPDIR)/vsnprintf.Plo
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/alphasort.Plo
+	-rm -f ./$(DEPDIR)/asprintf.Plo
+	-rm -f ./$(DEPDIR)/empty.Plo
+	-rm -f ./$(DEPDIR)/getopt.Plo
+	-rm -f ./$(DEPDIR)/getopt1.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-alphasort.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-asprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-md5.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-scandir.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-selinux.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-snprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strchrnul.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strerror.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strndup.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strnlen.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strsignal.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-unsetenv.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-vasprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-vsnprintf.Plo
+	-rm -f ./$(DEPDIR)/md5.Plo
+	-rm -f ./$(DEPDIR)/obstack.Plo
+	-rm -f ./$(DEPDIR)/scandir.Plo
+	-rm -f ./$(DEPDIR)/selinux.Plo
+	-rm -f ./$(DEPDIR)/snprintf.Plo
+	-rm -f ./$(DEPDIR)/strchrnul.Plo
+	-rm -f ./$(DEPDIR)/strerror.Plo
+	-rm -f ./$(DEPDIR)/strndup.Plo
+	-rm -f ./$(DEPDIR)/strnlen.Plo
+	-rm -f ./$(DEPDIR)/strsignal.Plo
+	-rm -f ./$(DEPDIR)/unsetenv.Plo
+	-rm -f ./$(DEPDIR)/vasprintf.Plo
+	-rm -f ./$(DEPDIR)/vsnprintf.Plo
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+	clean-generic clean-libtool clean-noinstLTLIBRARIES \
+	cscopelist-am ctags ctags-am distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/lib/compat/Makefile.in dpkg-1.20.7.1/lib/compat/Makefile.in
--- dpkg-1.20.7.1-orig/lib/compat/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/compat/Makefile.in	2021-06-09 18:23:00.780296220 -0500
@@ -0,0 +1,962 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@HAVE_SYS_ERRLIST_TRUE@am__append_1 = strerror.c
+@WITH_LIBSELINUX_TRUE@am__append_2 = selinux.c
+@HAVE_LIBMD_MD5_FALSE@am__append_3 = md5.c md5.h
+@HAVE_GETOPT_FALSE@am__append_4 = getopt.c getopt.h
+@HAVE_GETOPT_LONG_FALSE@@HAVE_GETOPT_TRUE@am__append_5 = getopt.c getopt.h
+@HAVE_GETOPT_LONG_FALSE@am__append_6 = getopt1.c
+@HAVE_OBSTACK_FREE_FALSE@am__append_7 = obstack.c obstack.h
+@HAVE_STRNLEN_FALSE@am__append_8 = strnlen.c
+@HAVE_STRCHRNUL_FALSE@am__append_9 = strchrnul.c
+@HAVE_STRNDUP_FALSE@am__append_10 = strndup.c
+@HAVE_STRERROR_FALSE@am__append_11 = strerror.c
+@HAVE_STRSIGNAL_FALSE@am__append_12 = strsignal.c
+@HAVE_SETEXECFILECON_FALSE@@WITH_LIBSELINUX_TRUE@am__append_13 = selinux.c
+@HAVE_C99_SNPRINTF_FALSE@am__append_14 = snprintf.c vsnprintf.c
+@HAVE_ASPRINTF_FALSE@am__append_15 = asprintf.c vasprintf.c
+@HAVE_ALPHASORT_FALSE@am__append_16 = alphasort.c
+@HAVE_SCANDIR_FALSE@am__append_17 = scandir.c
+@HAVE_UNSETENV_FALSE@am__append_18 = unsetenv.c
+subdir = lib/compat
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LTLIBRARIES = $(noinst_LTLIBRARIES)
+libcompat_test_la_LIBADD =
+am__libcompat_test_la_SOURCES_DIST = compat.h md5.c md5.h strchrnul.c \
+	strnlen.c strndup.c strsignal.c snprintf.c vsnprintf.c \
+	asprintf.c vasprintf.c alphasort.c scandir.c unsetenv.c \
+	strerror.c selinux.c
+@HAVE_SYS_ERRLIST_TRUE@am__objects_1 = libcompat_test_la-strerror.lo
+@WITH_LIBSELINUX_TRUE@am__objects_2 = libcompat_test_la-selinux.lo
+am_libcompat_test_la_OBJECTS = libcompat_test_la-md5.lo \
+	libcompat_test_la-strchrnul.lo libcompat_test_la-strnlen.lo \
+	libcompat_test_la-strndup.lo libcompat_test_la-strsignal.lo \
+	libcompat_test_la-snprintf.lo libcompat_test_la-vsnprintf.lo \
+	libcompat_test_la-asprintf.lo libcompat_test_la-vasprintf.lo \
+	libcompat_test_la-alphasort.lo libcompat_test_la-scandir.lo \
+	libcompat_test_la-unsetenv.lo $(am__objects_1) \
+	$(am__objects_2)
+libcompat_test_la_OBJECTS = $(am_libcompat_test_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+libcompat_la_LIBADD =
+am__libcompat_la_SOURCES_DIST = empty.c compat.h gettext.h md5.c md5.h \
+	getopt.c getopt.h getopt1.c obstack.c obstack.h strnlen.c \
+	strchrnul.c strndup.c strerror.c strsignal.c selinux.c \
+	snprintf.c vsnprintf.c asprintf.c vasprintf.c alphasort.c \
+	scandir.c unsetenv.c
+@HAVE_LIBMD_MD5_FALSE@am__objects_3 = md5.lo
+@HAVE_GETOPT_FALSE@am__objects_4 = getopt.lo
+@HAVE_GETOPT_LONG_FALSE@@HAVE_GETOPT_TRUE@am__objects_5 = getopt.lo
+@HAVE_GETOPT_LONG_FALSE@am__objects_6 = getopt1.lo
+@HAVE_OBSTACK_FREE_FALSE@am__objects_7 = obstack.lo
+@HAVE_STRNLEN_FALSE@am__objects_8 = strnlen.lo
+@HAVE_STRCHRNUL_FALSE@am__objects_9 = strchrnul.lo
+@HAVE_STRNDUP_FALSE@am__objects_10 = strndup.lo
+@HAVE_STRERROR_FALSE@am__objects_11 = strerror.lo
+@HAVE_STRSIGNAL_FALSE@am__objects_12 = strsignal.lo
+@HAVE_SETEXECFILECON_FALSE@@WITH_LIBSELINUX_TRUE@am__objects_13 =  \
+@HAVE_SETEXECFILECON_FALSE@@WITH_LIBSELINUX_TRUE@	selinux.lo
+@HAVE_C99_SNPRINTF_FALSE@am__objects_14 = snprintf.lo vsnprintf.lo
+@HAVE_ASPRINTF_FALSE@am__objects_15 = asprintf.lo vasprintf.lo
+@HAVE_ALPHASORT_FALSE@am__objects_16 = alphasort.lo
+@HAVE_SCANDIR_FALSE@am__objects_17 = scandir.lo
+@HAVE_UNSETENV_FALSE@am__objects_18 = unsetenv.lo
+am_libcompat_la_OBJECTS = empty.lo $(am__objects_3) $(am__objects_4) \
+	$(am__objects_5) $(am__objects_6) $(am__objects_7) \
+	$(am__objects_8) $(am__objects_9) $(am__objects_10) \
+	$(am__objects_11) $(am__objects_12) $(am__objects_13) \
+	$(am__objects_14) $(am__objects_15) $(am__objects_16) \
+	$(am__objects_17) $(am__objects_18)
+libcompat_la_OBJECTS = $(am_libcompat_la_OBJECTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/alphasort.Plo \
+	./$(DEPDIR)/asprintf.Plo ./$(DEPDIR)/empty.Plo \
+	./$(DEPDIR)/getopt.Plo ./$(DEPDIR)/getopt1.Plo \
+	./$(DEPDIR)/libcompat_test_la-alphasort.Plo \
+	./$(DEPDIR)/libcompat_test_la-asprintf.Plo \
+	./$(DEPDIR)/libcompat_test_la-md5.Plo \
+	./$(DEPDIR)/libcompat_test_la-scandir.Plo \
+	./$(DEPDIR)/libcompat_test_la-selinux.Plo \
+	./$(DEPDIR)/libcompat_test_la-snprintf.Plo \
+	./$(DEPDIR)/libcompat_test_la-strchrnul.Plo \
+	./$(DEPDIR)/libcompat_test_la-strerror.Plo \
+	./$(DEPDIR)/libcompat_test_la-strndup.Plo \
+	./$(DEPDIR)/libcompat_test_la-strnlen.Plo \
+	./$(DEPDIR)/libcompat_test_la-strsignal.Plo \
+	./$(DEPDIR)/libcompat_test_la-unsetenv.Plo \
+	./$(DEPDIR)/libcompat_test_la-vasprintf.Plo \
+	./$(DEPDIR)/libcompat_test_la-vsnprintf.Plo \
+	./$(DEPDIR)/md5.Plo ./$(DEPDIR)/obstack.Plo \
+	./$(DEPDIR)/scandir.Plo ./$(DEPDIR)/selinux.Plo \
+	./$(DEPDIR)/snprintf.Plo ./$(DEPDIR)/strchrnul.Plo \
+	./$(DEPDIR)/strerror.Plo ./$(DEPDIR)/strndup.Plo \
+	./$(DEPDIR)/strnlen.Plo ./$(DEPDIR)/strsignal.Plo \
+	./$(DEPDIR)/unsetenv.Plo ./$(DEPDIR)/vasprintf.Plo \
+	./$(DEPDIR)/vsnprintf.Plo
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libcompat_test_la_SOURCES) $(libcompat_la_SOURCES)
+DIST_SOURCES = $(am__libcompat_test_la_SOURCES_DIST) \
+	$(am__libcompat_la_SOURCES_DIST)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CPPFLAGS = \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir)
+
+noinst_LTLIBRARIES = libcompat-test.la libcompat.la
+libcompat_test_la_CPPFLAGS = $(AM_CPPFLAGS) -DTEST_LIBCOMPAT=1
+libcompat_test_la_SOURCES = compat.h md5.c md5.h strchrnul.c strnlen.c \
+	strndup.c strsignal.c snprintf.c vsnprintf.c asprintf.c \
+	vasprintf.c alphasort.c scandir.c unsetenv.c $(am__append_1) \
+	$(am__append_2)
+libcompat_la_SOURCES = empty.c compat.h gettext.h $(am__append_3) \
+	$(am__append_4) $(am__append_5) $(am__append_6) \
+	$(am__append_7) $(am__append_8) $(am__append_9) \
+	$(am__append_10) $(am__append_11) $(am__append_12) \
+	$(am__append_13) $(am__append_14) $(am__append_15) \
+	$(am__append_16) $(am__append_17) $(am__append_18)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/compat/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign lib/compat/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
+libcompat-test.la: $(libcompat_test_la_OBJECTS) $(libcompat_test_la_DEPENDENCIES) $(EXTRA_libcompat_test_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK)  $(libcompat_test_la_OBJECTS) $(libcompat_test_la_LIBADD) $(LIBS)
+
+libcompat.la: $(libcompat_la_OBJECTS) $(libcompat_la_DEPENDENCIES) $(EXTRA_libcompat_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(LINK)  $(libcompat_la_OBJECTS) $(libcompat_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alphasort.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/asprintf.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/empty.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-alphasort.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-asprintf.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-md5.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-scandir.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-selinux.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-snprintf.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-strchrnul.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-strerror.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-strndup.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-strnlen.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-strsignal.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-unsetenv.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-vasprintf.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libcompat_test_la-vsnprintf.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/md5.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obstack.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scandir.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/selinux.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/snprintf.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strchrnul.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strerror.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strndup.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strnlen.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strsignal.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unsetenv.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vasprintf.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vsnprintf.Plo@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+libcompat_test_la-md5.lo: md5.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-md5.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-md5.Tpo -c -o libcompat_test_la-md5.lo `test -f 'md5.c' || echo '$(srcdir)/'`md5.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-md5.Tpo $(DEPDIR)/libcompat_test_la-md5.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='md5.c' object='libcompat_test_la-md5.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-md5.lo `test -f 'md5.c' || echo '$(srcdir)/'`md5.c
+
+libcompat_test_la-strchrnul.lo: strchrnul.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-strchrnul.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-strchrnul.Tpo -c -o libcompat_test_la-strchrnul.lo `test -f 'strchrnul.c' || echo '$(srcdir)/'`strchrnul.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-strchrnul.Tpo $(DEPDIR)/libcompat_test_la-strchrnul.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='strchrnul.c' object='libcompat_test_la-strchrnul.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-strchrnul.lo `test -f 'strchrnul.c' || echo '$(srcdir)/'`strchrnul.c
+
+libcompat_test_la-strnlen.lo: strnlen.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-strnlen.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-strnlen.Tpo -c -o libcompat_test_la-strnlen.lo `test -f 'strnlen.c' || echo '$(srcdir)/'`strnlen.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-strnlen.Tpo $(DEPDIR)/libcompat_test_la-strnlen.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='strnlen.c' object='libcompat_test_la-strnlen.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-strnlen.lo `test -f 'strnlen.c' || echo '$(srcdir)/'`strnlen.c
+
+libcompat_test_la-strndup.lo: strndup.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-strndup.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-strndup.Tpo -c -o libcompat_test_la-strndup.lo `test -f 'strndup.c' || echo '$(srcdir)/'`strndup.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-strndup.Tpo $(DEPDIR)/libcompat_test_la-strndup.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='strndup.c' object='libcompat_test_la-strndup.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-strndup.lo `test -f 'strndup.c' || echo '$(srcdir)/'`strndup.c
+
+libcompat_test_la-strsignal.lo: strsignal.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-strsignal.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-strsignal.Tpo -c -o libcompat_test_la-strsignal.lo `test -f 'strsignal.c' || echo '$(srcdir)/'`strsignal.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-strsignal.Tpo $(DEPDIR)/libcompat_test_la-strsignal.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='strsignal.c' object='libcompat_test_la-strsignal.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-strsignal.lo `test -f 'strsignal.c' || echo '$(srcdir)/'`strsignal.c
+
+libcompat_test_la-snprintf.lo: snprintf.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-snprintf.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-snprintf.Tpo -c -o libcompat_test_la-snprintf.lo `test -f 'snprintf.c' || echo '$(srcdir)/'`snprintf.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-snprintf.Tpo $(DEPDIR)/libcompat_test_la-snprintf.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='snprintf.c' object='libcompat_test_la-snprintf.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-snprintf.lo `test -f 'snprintf.c' || echo '$(srcdir)/'`snprintf.c
+
+libcompat_test_la-vsnprintf.lo: vsnprintf.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-vsnprintf.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-vsnprintf.Tpo -c -o libcompat_test_la-vsnprintf.lo `test -f 'vsnprintf.c' || echo '$(srcdir)/'`vsnprintf.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-vsnprintf.Tpo $(DEPDIR)/libcompat_test_la-vsnprintf.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='vsnprintf.c' object='libcompat_test_la-vsnprintf.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-vsnprintf.lo `test -f 'vsnprintf.c' || echo '$(srcdir)/'`vsnprintf.c
+
+libcompat_test_la-asprintf.lo: asprintf.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-asprintf.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-asprintf.Tpo -c -o libcompat_test_la-asprintf.lo `test -f 'asprintf.c' || echo '$(srcdir)/'`asprintf.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-asprintf.Tpo $(DEPDIR)/libcompat_test_la-asprintf.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='asprintf.c' object='libcompat_test_la-asprintf.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-asprintf.lo `test -f 'asprintf.c' || echo '$(srcdir)/'`asprintf.c
+
+libcompat_test_la-vasprintf.lo: vasprintf.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-vasprintf.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-vasprintf.Tpo -c -o libcompat_test_la-vasprintf.lo `test -f 'vasprintf.c' || echo '$(srcdir)/'`vasprintf.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-vasprintf.Tpo $(DEPDIR)/libcompat_test_la-vasprintf.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='vasprintf.c' object='libcompat_test_la-vasprintf.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-vasprintf.lo `test -f 'vasprintf.c' || echo '$(srcdir)/'`vasprintf.c
+
+libcompat_test_la-alphasort.lo: alphasort.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-alphasort.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-alphasort.Tpo -c -o libcompat_test_la-alphasort.lo `test -f 'alphasort.c' || echo '$(srcdir)/'`alphasort.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-alphasort.Tpo $(DEPDIR)/libcompat_test_la-alphasort.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='alphasort.c' object='libcompat_test_la-alphasort.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-alphasort.lo `test -f 'alphasort.c' || echo '$(srcdir)/'`alphasort.c
+
+libcompat_test_la-scandir.lo: scandir.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-scandir.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-scandir.Tpo -c -o libcompat_test_la-scandir.lo `test -f 'scandir.c' || echo '$(srcdir)/'`scandir.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-scandir.Tpo $(DEPDIR)/libcompat_test_la-scandir.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='scandir.c' object='libcompat_test_la-scandir.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-scandir.lo `test -f 'scandir.c' || echo '$(srcdir)/'`scandir.c
+
+libcompat_test_la-unsetenv.lo: unsetenv.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-unsetenv.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-unsetenv.Tpo -c -o libcompat_test_la-unsetenv.lo `test -f 'unsetenv.c' || echo '$(srcdir)/'`unsetenv.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-unsetenv.Tpo $(DEPDIR)/libcompat_test_la-unsetenv.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='unsetenv.c' object='libcompat_test_la-unsetenv.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-unsetenv.lo `test -f 'unsetenv.c' || echo '$(srcdir)/'`unsetenv.c
+
+libcompat_test_la-strerror.lo: strerror.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-strerror.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-strerror.Tpo -c -o libcompat_test_la-strerror.lo `test -f 'strerror.c' || echo '$(srcdir)/'`strerror.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-strerror.Tpo $(DEPDIR)/libcompat_test_la-strerror.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='strerror.c' object='libcompat_test_la-strerror.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-strerror.lo `test -f 'strerror.c' || echo '$(srcdir)/'`strerror.c
+
+libcompat_test_la-selinux.lo: selinux.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libcompat_test_la-selinux.lo -MD -MP -MF $(DEPDIR)/libcompat_test_la-selinux.Tpo -c -o libcompat_test_la-selinux.lo `test -f 'selinux.c' || echo '$(srcdir)/'`selinux.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/libcompat_test_la-selinux.Tpo $(DEPDIR)/libcompat_test_la-selinux.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='selinux.c' object='libcompat_test_la-selinux.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libcompat_test_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libcompat_test_la-selinux.lo `test -f 'selinux.c' || echo '$(srcdir)/'`selinux.c
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-noinstLTLIBRARIES \
+	mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/alphasort.Plo
+	-rm -f ./$(DEPDIR)/asprintf.Plo
+	-rm -f ./$(DEPDIR)/empty.Plo
+	-rm -f ./$(DEPDIR)/getopt.Plo
+	-rm -f ./$(DEPDIR)/getopt1.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-alphasort.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-asprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-md5.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-scandir.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-selinux.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-snprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strchrnul.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strerror.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strndup.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strnlen.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strsignal.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-unsetenv.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-vasprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-vsnprintf.Plo
+	-rm -f ./$(DEPDIR)/md5.Plo
+	-rm -f ./$(DEPDIR)/obstack.Plo
+	-rm -f ./$(DEPDIR)/scandir.Plo
+	-rm -f ./$(DEPDIR)/selinux.Plo
+	-rm -f ./$(DEPDIR)/snprintf.Plo
+	-rm -f ./$(DEPDIR)/strchrnul.Plo
+	-rm -f ./$(DEPDIR)/strerror.Plo
+	-rm -f ./$(DEPDIR)/strndup.Plo
+	-rm -f ./$(DEPDIR)/strnlen.Plo
+	-rm -f ./$(DEPDIR)/strsignal.Plo
+	-rm -f ./$(DEPDIR)/unsetenv.Plo
+	-rm -f ./$(DEPDIR)/vasprintf.Plo
+	-rm -f ./$(DEPDIR)/vsnprintf.Plo
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/alphasort.Plo
+	-rm -f ./$(DEPDIR)/asprintf.Plo
+	-rm -f ./$(DEPDIR)/empty.Plo
+	-rm -f ./$(DEPDIR)/getopt.Plo
+	-rm -f ./$(DEPDIR)/getopt1.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-alphasort.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-asprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-md5.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-scandir.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-selinux.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-snprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strchrnul.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strerror.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strndup.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strnlen.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-strsignal.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-unsetenv.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-vasprintf.Plo
+	-rm -f ./$(DEPDIR)/libcompat_test_la-vsnprintf.Plo
+	-rm -f ./$(DEPDIR)/md5.Plo
+	-rm -f ./$(DEPDIR)/obstack.Plo
+	-rm -f ./$(DEPDIR)/scandir.Plo
+	-rm -f ./$(DEPDIR)/selinux.Plo
+	-rm -f ./$(DEPDIR)/snprintf.Plo
+	-rm -f ./$(DEPDIR)/strchrnul.Plo
+	-rm -f ./$(DEPDIR)/strerror.Plo
+	-rm -f ./$(DEPDIR)/strndup.Plo
+	-rm -f ./$(DEPDIR)/strnlen.Plo
+	-rm -f ./$(DEPDIR)/strsignal.Plo
+	-rm -f ./$(DEPDIR)/unsetenv.Plo
+	-rm -f ./$(DEPDIR)/vasprintf.Plo
+	-rm -f ./$(DEPDIR)/vsnprintf.Plo
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+	clean-generic clean-libtool clean-noinstLTLIBRARIES \
+	cscopelist-am ctags ctags-am distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/arch.Plo dpkg-1.20.7.1/lib/dpkg/.deps/arch.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/arch.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/arch.Plo	2021-06-09 18:24:56.321474986 -0500
@@ -0,0 +1,238 @@
+arch.lo: arch.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/sys/types.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/c-ctype.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/dpkg.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h \
+ ../../lib/dpkg/dpkg-db.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/dir.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/c-ctype.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/dir.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/ar.Plo dpkg-1.20.7.1/lib/dpkg/.deps/ar.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/ar.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/ar.Plo	2021-06-09 18:24:56.136474703 -0500
@@ -0,0 +1,256 @@
+ar.lo: ar.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/time.h \
+ /usr/include/bits/time.h /usr/include/bits/timex.h \
+ /usr/include/bits/types/struct_tm.h \
+ /usr/include/bits/types/struct_itimerspec.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/wchar.h /usr/include/bits/stdint-uintn.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/string.h /usr/include/strings.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/fdio.h ../../lib/dpkg/buffer.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/ar.h /usr/include/ar.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/time.h:
+
+/usr/include/bits/time.h:
+
+/usr/include/bits/timex.h:
+
+/usr/include/bits/types/struct_tm.h:
+
+/usr/include/bits/types/struct_itimerspec.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/fdio.h:
+
+../../lib/dpkg/buffer.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/ar.h:
+
+/usr/include/ar.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/atomic-file.Plo dpkg-1.20.7.1/lib/dpkg/.deps/atomic-file.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/atomic-file.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/atomic-file.Plo	2021-06-09 18:24:56.493475248 -0500
@@ -0,0 +1,243 @@
+atomic-file.lo: atomic-file.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/stat.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/errno.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/string.h /usr/include/strings.h ../../lib/dpkg/dpkg.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dir.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h /usr/include/bits/posix1_lim.h \
+ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \
+ ../../lib/dpkg/atomic-file.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dir.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+../../lib/dpkg/atomic-file.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/buffer.Plo dpkg-1.20.7.1/lib/dpkg/.deps/buffer.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/buffer.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/buffer.Plo	2021-06-09 18:24:56.681475535 -0500
@@ -0,0 +1,241 @@
+buffer.lo: buffer.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ ../../lib/compat/md5.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/wchar.h /usr/include/bits/stdint-uintn.h \
+ /usr/include/string.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/varbuf.h ../../lib/dpkg/fdio.h \
+ ../../lib/dpkg/buffer.h ../../lib/dpkg/error.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+../../lib/compat/md5.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/fdio.h:
+
+../../lib/dpkg/buffer.h:
+
+../../lib/dpkg/error.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/c-ctype.Plo dpkg-1.20.7.1/lib/dpkg/.deps/c-ctype.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/c-ctype.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/c-ctype.Plo	2021-06-09 18:24:56.816475741 -0500
@@ -0,0 +1,16 @@
+c-ctype.lo: c-ctype.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h ../../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/macros.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+../../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/macros.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/cleanup.Plo dpkg-1.20.7.1/lib/dpkg/.deps/cleanup.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/cleanup.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/cleanup.Plo	2021-06-09 18:24:56.957475957 -0500
@@ -0,0 +1,171 @@
+cleanup.lo: cleanup.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/dirent.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/dirent.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/include/stdio.h /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/dpkg.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/dirent.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/color.Plo dpkg-1.20.7.1/lib/dpkg/.deps/color.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/color.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/color.Plo	2021-06-09 18:24:57.101476176 -0500
@@ -0,0 +1,140 @@
+color.lo: color.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdlib.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/string.h /usr/include/strings.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/color.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/color.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/command.Plo dpkg-1.20.7.1/lib/dpkg/.deps/command.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/command.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/command.Plo	2021-06-09 18:24:57.275476442 -0500
@@ -0,0 +1,212 @@
+command.lo: command.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/stdlib.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/i18n.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h /usr/include/string.h /usr/include/strings.h \
+ ../../lib/dpkg/path.h /usr/include/sys/stat.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h ../../lib/dpkg/command.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/path.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+../../lib/dpkg/command.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/compress.Plo dpkg-1.20.7.1/lib/dpkg/.deps/compress.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/compress.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/compress.Plo	2021-06-09 18:24:57.544476853 -0500
@@ -0,0 +1,313 @@
+compress.lo: compress.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/errno.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/zlib.h /usr/include/zconf.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/posix1_lim.h \
+ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \
+ /usr/include/bits/posix2_lim.h /usr/include/bits/xopen_lim.h \
+ /usr/include/bits/uio_lim.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/lzma.h /usr/include/inttypes.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h /usr/include/lzma/version.h \
+ /usr/include/lzma/base.h /usr/include/lzma/vli.h \
+ /usr/include/lzma/check.h /usr/include/lzma/filter.h \
+ /usr/include/lzma/bcj.h /usr/include/lzma/delta.h \
+ /usr/include/lzma/lzma12.h /usr/include/lzma/container.h \
+ /usr/include/lzma/stream_flags.h /usr/include/lzma/block.h \
+ /usr/include/lzma/index.h /usr/include/lzma/index_hash.h \
+ /usr/include/lzma/hardware.h /usr/include/bzlib.h /usr/include/stdio.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/dpkg.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h ../../lib/dpkg/error.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/fdio.h ../../lib/dpkg/buffer.h \
+ ../../lib/dpkg/command.h ../../lib/dpkg/compress.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/errno.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/zlib.h:
+
+/usr/include/zconf.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/lzma.h:
+
+/usr/include/inttypes.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/lzma/version.h:
+
+/usr/include/lzma/base.h:
+
+/usr/include/lzma/vli.h:
+
+/usr/include/lzma/check.h:
+
+/usr/include/lzma/filter.h:
+
+/usr/include/lzma/bcj.h:
+
+/usr/include/lzma/delta.h:
+
+/usr/include/lzma/lzma12.h:
+
+/usr/include/lzma/container.h:
+
+/usr/include/lzma/stream_flags.h:
+
+/usr/include/lzma/block.h:
+
+/usr/include/lzma/index.h:
+
+/usr/include/lzma/index_hash.h:
+
+/usr/include/lzma/hardware.h:
+
+/usr/include/bzlib.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/fdio.h:
+
+../../lib/dpkg/buffer.h:
+
+../../lib/dpkg/command.h:
+
+../../lib/dpkg/compress.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-ctrl-access.Plo dpkg-1.20.7.1/lib/dpkg/.deps/db-ctrl-access.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-ctrl-access.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/db-ctrl-access.Plo	2021-06-09 18:24:58.104477707 -0500
@@ -0,0 +1,244 @@
+db-ctrl-access.lo: db-ctrl-access.c /usr/include/stdc-predef.h \
+ ../../config.h ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/dirent.h /usr/include/bits/dirent.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/strings.h ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/fsys.h ../../lib/dpkg/file.h \
+ ../../lib/dpkg/db-ctrl.h ../../lib/dpkg/debug.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/fsys.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/db-ctrl.h:
+
+../../lib/dpkg/debug.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-ctrl-format.Plo dpkg-1.20.7.1/lib/dpkg/.deps/db-ctrl-format.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-ctrl-format.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/db-ctrl-format.Plo	2021-06-09 18:24:58.269477959 -0500
@@ -0,0 +1,228 @@
+db-ctrl-format.lo: db-ctrl-format.c /usr/include/stdc-predef.h \
+ ../../config.h ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/stdlib.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h /usr/include/string.h /usr/include/strings.h \
+ ../../lib/dpkg/dpkg.h ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/db-ctrl.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/db-ctrl.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-ctrl-upgrade.Plo dpkg-1.20.7.1/lib/dpkg/.deps/db-ctrl-upgrade.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-ctrl-upgrade.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/db-ctrl-upgrade.Plo	2021-06-09 18:24:58.451478237 -0500
@@ -0,0 +1,267 @@
+db-ctrl-upgrade.lo: db-ctrl-upgrade.c /usr/include/stdc-predef.h \
+ ../../config.h ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/stdlib.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/string.h /usr/include/strings.h ../../lib/dpkg/dpkg.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/fsys.h ../../lib/dpkg/file.h \
+ ../../lib/dpkg/db-ctrl.h ../../lib/dpkg/path.h ../../lib/dpkg/dir.h \
+ /usr/include/dirent.h /usr/include/bits/dirent.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/fsys.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/db-ctrl.h:
+
+../../lib/dpkg/path.h:
+
+../../lib/dpkg/dir.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/dbdir.Plo dpkg-1.20.7.1/lib/dpkg/.deps/dbdir.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/dbdir.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/dbdir.Plo	2021-06-09 18:24:57.696477084 -0500
@@ -0,0 +1,191 @@
+dbdir.lo: dbdir.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h /usr/include/string.h /usr/include/strings.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-fsys-digest.Plo dpkg-1.20.7.1/lib/dpkg/.deps/db-fsys-digest.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-fsys-digest.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/db-fsys-digest.Plo	2021-06-09 18:24:58.618478492 -0500
@@ -0,0 +1,263 @@
+db-fsys-digest.lo: db-fsys-digest.c /usr/include/stdc-predef.h \
+ ../../config.h ../../lib/compat/compat.h /usr/include/sys/stat.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/errno.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/dpkg.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/debug.h ../../lib/dpkg/fdio.h \
+ ../../lib/dpkg/dir.h /usr/include/dirent.h /usr/include/bits/dirent.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h ../../lib/dpkg/db-ctrl.h \
+ ../../lib/dpkg/db-fsys.h ../../lib/dpkg/file.h ../../lib/dpkg/fsys.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/debug.h:
+
+../../lib/dpkg/fdio.h:
+
+../../lib/dpkg/dir.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+../../lib/dpkg/db-ctrl.h:
+
+../../lib/dpkg/db-fsys.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/fsys.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-fsys-divert.Plo dpkg-1.20.7.1/lib/dpkg/.deps/db-fsys-divert.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-fsys-divert.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/db-fsys-divert.Plo	2021-06-09 18:24:58.809478783 -0500
@@ -0,0 +1,269 @@
+db-fsys-divert.lo: db-fsys-divert.c /usr/include/stdc-predef.h \
+ ../../config.h ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/pwd.h /usr/include/bits/types/FILE.h \
+ /usr/include/grp.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/debug.h ../../lib/dpkg/db-fsys.h \
+ ../../lib/dpkg/file.h ../../lib/dpkg/fsys.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/pwd.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/grp.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/debug.h:
+
+../../lib/dpkg/db-fsys.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/fsys.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-fsys-files.Plo dpkg-1.20.7.1/lib/dpkg/.deps/db-fsys-files.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-fsys-files.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/db-fsys-files.Plo	2021-06-09 18:24:59.022479109 -0500
@@ -0,0 +1,364 @@
+db-fsys-files.lo: db-fsys-files.c /usr/include/stdc-predef.h \
+ ../../config.h ../../lib/compat/compat.h /usr/include/linux/fiemap.h \
+ /usr/include/linux/types.h /usr/include/asm/types.h \
+ /usr/include/asm-generic/types.h /usr/include/asm-generic/int-ll64.h \
+ /usr/include/asm/bitsperlong.h /usr/include/asm-generic/bitsperlong.h \
+ /usr/include/linux/posix_types.h /usr/include/linux/stddef.h \
+ /usr/include/asm/posix_types.h /usr/include/asm/posix_types_64.h \
+ /usr/include/asm-generic/posix_types.h /usr/include/linux/fs.h \
+ /usr/include/linux/limits.h /usr/include/linux/ioctl.h \
+ /usr/include/asm/ioctl.h /usr/include/asm-generic/ioctl.h \
+ /usr/include/linux/mount.h /usr/include/sys/ioctl.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/ioctls.h /usr/include/asm/ioctls.h \
+ /usr/include/asm-generic/ioctls.h /usr/include/bits/ioctl-types.h \
+ /usr/include/sys/ttydefaults.h /usr/include/sys/vfs.h \
+ /usr/include/sys/statfs.h /usr/include/bits/statfs.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/sys/types.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/pwd.h /usr/include/bits/types/FILE.h \
+ /usr/include/grp.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/path.h ../../lib/dpkg/dir.h \
+ /usr/include/dirent.h /usr/include/bits/dirent.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ ../../lib/dpkg/fdio.h ../../lib/dpkg/pkg-array.h ../../lib/dpkg/pkg.h \
+ ../../lib/dpkg/pkg-files.h ../../lib/dpkg/fsys.h ../../lib/dpkg/file.h \
+ ../../lib/dpkg/progress.h ../../lib/dpkg/db-ctrl.h \
+ ../../lib/dpkg/db-fsys.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/linux/fiemap.h:
+
+/usr/include/linux/types.h:
+
+/usr/include/asm/types.h:
+
+/usr/include/asm-generic/types.h:
+
+/usr/include/asm-generic/int-ll64.h:
+
+/usr/include/asm/bitsperlong.h:
+
+/usr/include/asm-generic/bitsperlong.h:
+
+/usr/include/linux/posix_types.h:
+
+/usr/include/linux/stddef.h:
+
+/usr/include/asm/posix_types.h:
+
+/usr/include/asm/posix_types_64.h:
+
+/usr/include/asm-generic/posix_types.h:
+
+/usr/include/linux/fs.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/linux/ioctl.h:
+
+/usr/include/asm/ioctl.h:
+
+/usr/include/asm-generic/ioctl.h:
+
+/usr/include/linux/mount.h:
+
+/usr/include/sys/ioctl.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/ioctls.h:
+
+/usr/include/asm/ioctls.h:
+
+/usr/include/asm-generic/ioctls.h:
+
+/usr/include/bits/ioctl-types.h:
+
+/usr/include/sys/ttydefaults.h:
+
+/usr/include/sys/vfs.h:
+
+/usr/include/sys/statfs.h:
+
+/usr/include/bits/statfs.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/pwd.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/grp.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/path.h:
+
+../../lib/dpkg/dir.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+../../lib/dpkg/fdio.h:
+
+../../lib/dpkg/pkg-array.h:
+
+../../lib/dpkg/pkg.h:
+
+../../lib/dpkg/pkg-files.h:
+
+../../lib/dpkg/fsys.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/progress.h:
+
+../../lib/dpkg/db-ctrl.h:
+
+../../lib/dpkg/db-fsys.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-fsys-override.Plo dpkg-1.20.7.1/lib/dpkg/.deps/db-fsys-override.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/db-fsys-override.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/db-fsys-override.Plo	2021-06-09 18:24:59.215479403 -0500
@@ -0,0 +1,271 @@
+db-fsys-override.lo: db-fsys-override.c /usr/include/stdc-predef.h \
+ ../../config.h ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/pwd.h /usr/include/bits/types/FILE.h \
+ /usr/include/grp.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/fdio.h ../../lib/dpkg/debug.h \
+ ../../lib/dpkg/db-fsys.h ../../lib/dpkg/file.h ../../lib/dpkg/fsys.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/pwd.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/grp.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/fdio.h:
+
+../../lib/dpkg/debug.h:
+
+../../lib/dpkg/db-fsys.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/fsys.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/dbmodify.Plo dpkg-1.20.7.1/lib/dpkg/.deps/dbmodify.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/dbmodify.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/dbmodify.Plo	2021-06-09 18:24:57.938477454 -0500
@@ -0,0 +1,362 @@
+dbmodify.lo: dbmodify.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/stat.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/wait.h \
+ /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ /usr/include/time.h /usr/include/bits/time.h /usr/include/bits/timex.h \
+ /usr/include/bits/types/struct_tm.h \
+ /usr/include/bits/types/struct_itimerspec.h /usr/include/fcntl.h \
+ /usr/include/bits/fcntl.h /usr/include/bits/fcntl-linux.h \
+ /usr/include/bits/types/struct_iovec.h /usr/include/linux/falloc.h \
+ /usr/include/dirent.h /usr/include/bits/dirent.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdlib.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/c-ctype.h \
+ ../../lib/dpkg/dpkg.h ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h \
+ ../../lib/dpkg/dpkg-db.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/file.h ../../lib/dpkg/dir.h \
+ ../../lib/dpkg/triglib.h ../../lib/dpkg/fsys.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/wait.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/time.h:
+
+/usr/include/bits/time.h:
+
+/usr/include/bits/timex.h:
+
+/usr/include/bits/types/struct_tm.h:
+
+/usr/include/bits/types/struct_itimerspec.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/c-ctype.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/dir.h:
+
+../../lib/dpkg/triglib.h:
+
+../../lib/dpkg/fsys.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/debug.Plo dpkg-1.20.7.1/lib/dpkg/.deps/debug.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/debug.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/debug.Plo	2021-06-09 18:24:59.514479860 -0500
@@ -0,0 +1,146 @@
+debug.lo: debug.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/stdio.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/dpkg.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/debug.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/debug.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/deb-version.Plo dpkg-1.20.7.1/lib/dpkg/.deps/deb-version.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/deb-version.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/deb-version.Plo	2021-06-09 18:24:59.372479642 -0500
@@ -0,0 +1,215 @@
+deb-version.lo: deb-version.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h \
+ ../../lib/dpkg/deb-version.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/deb-version.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/depcon.Plo dpkg-1.20.7.1/lib/dpkg/.deps/depcon.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/depcon.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/depcon.Plo	2021-06-09 18:24:59.663480087 -0500
@@ -0,0 +1,171 @@
+depcon.lo: depcon.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h ../../lib/dpkg/dpkg.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/stdio.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h /usr/include/string.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/dir.Plo dpkg-1.20.7.1/lib/dpkg/.deps/dir.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/dir.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/dir.Plo	2021-06-09 18:24:59.832480345 -0500
@@ -0,0 +1,253 @@
+dir.lo: dir.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h /usr/include/bits/posix1_lim.h \
+ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/dpkg.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/i18n.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/dir.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dir.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/dump.Plo dpkg-1.20.7.1/lib/dpkg/.deps/dump.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/dump.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/dump.Plo	2021-06-09 18:25:00.103480759 -0500
@@ -0,0 +1,277 @@
+dump.lo: dump.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/dpkg.h ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h \
+ ../../lib/dpkg/dpkg-db.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg-array.h ../../lib/dpkg/pkg.h \
+ ../../lib/dpkg/pkg-show.h ../../lib/dpkg/dir.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h /usr/include/bits/posix1_lim.h \
+ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \
+ ../../lib/dpkg/parsedump.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg-array.h:
+
+../../lib/dpkg/pkg.h:
+
+../../lib/dpkg/pkg-show.h:
+
+../../lib/dpkg/dir.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+../../lib/dpkg/parsedump.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/ehandle.Plo dpkg-1.20.7.1/lib/dpkg/.deps/ehandle.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/ehandle.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/ehandle.Plo	2021-06-09 18:25:00.338481117 -0500
@@ -0,0 +1,212 @@
+ehandle.lo: ehandle.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/errno.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h /usr/include/bits/types/__fpos_t.h \
+ /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h ../../lib/dpkg/i18n.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/color.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/errno.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/color.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/error.Plo dpkg-1.20.7.1/lib/dpkg/.deps/error.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/error.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/error.Plo	2021-06-09 18:25:00.501481366 -0500
@@ -0,0 +1,195 @@
+error.lo: error.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/errno.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/varbuf.h ../../lib/dpkg/error.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/errno.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/error.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/fdio.Plo dpkg-1.20.7.1/lib/dpkg/.deps/fdio.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/fdio.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/fdio.Plo	2021-06-09 18:25:00.649481592 -0500
@@ -0,0 +1,136 @@
+fdio.lo: fdio.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/errno.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/fcntl.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/fcntl.h /usr/include/bits/fcntl-linux.h \
+ /usr/include/bits/types/struct_iovec.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/linux/falloc.h /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/stat.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/fdio.h \
+ /usr/include/sys/types.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h ../../lib/dpkg/macros.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/errno.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/fdio.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+../../lib/dpkg/macros.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/fields.Plo dpkg-1.20.7.1/lib/dpkg/.deps/fields.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/fields.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/fields.Plo	2021-06-09 18:25:01.133482330 -0500
@@ -0,0 +1,218 @@
+fields.lo: fields.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/dpkg.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h \
+ ../../lib/dpkg/dpkg-db.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/path.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h \
+ ../../lib/dpkg/parsedump.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h ../../lib/dpkg/pkg-spec.h \
+ ../../lib/dpkg/triglib.h ../../lib/dpkg/fsys.h ../../lib/dpkg/file.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/path.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+../../lib/dpkg/parsedump.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+../../lib/dpkg/pkg-spec.h:
+
+../../lib/dpkg/triglib.h:
+
+../../lib/dpkg/fsys.h:
+
+../../lib/dpkg/file.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/file.Plo dpkg-1.20.7.1/lib/dpkg/.deps/file.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/file.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/file.Plo	2021-06-09 18:25:00.825481861 -0500
@@ -0,0 +1,232 @@
+file.lo: file.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/dpkg.h \
+ /usr/include/stdio.h /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/i18n.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/string.h \
+ /usr/include/strings.h ../../lib/dpkg/pager.h ../../lib/dpkg/fdio.h \
+ ../../lib/dpkg/buffer.h ../../lib/dpkg/error.h ../../lib/dpkg/file.h \
+ ../../lib/dpkg/varbuf.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/pager.h:
+
+../../lib/dpkg/fdio.h:
+
+../../lib/dpkg/buffer.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/varbuf.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/fsys-dir.Plo dpkg-1.20.7.1/lib/dpkg/.deps/fsys-dir.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/fsys-dir.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/fsys-dir.Plo	2021-06-09 18:25:01.291482572 -0500
@@ -0,0 +1,192 @@
+fsys-dir.lo: fsys-dir.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/path.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h ../../lib/dpkg/fsys.h \
+ ../../lib/dpkg/file.h ../../lib/dpkg/error.h ../../lib/dpkg/varbuf.h \
+ /usr/include/string.h /usr/include/strings.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/path.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+../../lib/dpkg/fsys.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/varbuf.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/fsys-hash.Plo dpkg-1.20.7.1/lib/dpkg/.deps/fsys-hash.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/fsys-hash.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/fsys-hash.Plo	2021-06-09 18:25:01.621483075 -0500
@@ -0,0 +1,205 @@
+fsys-hash.lo: fsys-hash.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/path.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h fsys.h \
+ ../../lib/dpkg/file.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/path.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+fsys.h:
+
+../../lib/dpkg/file.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/fsys-iter.Plo dpkg-1.20.7.1/lib/dpkg/.deps/fsys-iter.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/fsys-iter.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/fsys-iter.Plo	2021-06-09 18:25:01.443482804 -0500
@@ -0,0 +1,198 @@
+fsys-iter.lo: fsys-iter.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h /usr/include/string.h /usr/include/strings.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg-list.h fsys.h \
+ ../../lib/dpkg/file.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg-list.h:
+
+fsys.h:
+
+../../lib/dpkg/file.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/glob.Plo dpkg-1.20.7.1/lib/dpkg/.deps/glob.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/glob.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/glob.Plo	2021-06-09 18:25:01.765483295 -0500
@@ -0,0 +1,171 @@
+glob.lo: glob.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/glob.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/glob.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/i18n.Plo dpkg-1.20.7.1/lib/dpkg/.deps/i18n.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/i18n.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/i18n.Plo	2021-06-09 18:25:01.901483503 -0500
@@ -0,0 +1,53 @@
+i18n.lo: i18n.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/strings.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/log.Plo dpkg-1.20.7.1/lib/dpkg/.deps/log.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/log.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/log.Plo	2021-06-09 18:25:02.061483747 -0500
@@ -0,0 +1,250 @@
+log.lo: log.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/time.h /usr/include/bits/time.h /usr/include/bits/timex.h \
+ /usr/include/bits/types/struct_tm.h \
+ /usr/include/bits/types/struct_itimerspec.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/strings.h ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/fdio.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/time.h:
+
+/usr/include/bits/time.h:
+
+/usr/include/bits/timex.h:
+
+/usr/include/bits/types/struct_tm.h:
+
+/usr/include/bits/types/struct_itimerspec.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/fdio.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/mlib.Plo dpkg-1.20.7.1/lib/dpkg/.deps/mlib.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/mlib.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/mlib.Plo	2021-06-09 18:25:02.233484010 -0500
@@ -0,0 +1,233 @@
+mlib.lo: mlib.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/bits/stat.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/dpkg.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/namevalue.Plo dpkg-1.20.7.1/lib/dpkg/.deps/namevalue.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/namevalue.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/namevalue.Plo	2021-06-09 18:25:02.374484225 -0500
@@ -0,0 +1,44 @@
+namevalue.lo: namevalue.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/macros.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/macros.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/nfmalloc.Plo dpkg-1.20.7.1/lib/dpkg/.deps/nfmalloc.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/nfmalloc.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/nfmalloc.Plo	2021-06-09 18:25:02.536484472 -0500
@@ -0,0 +1,205 @@
+nfmalloc.lo: nfmalloc.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/obstack.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/obstack.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/options-parsers.Plo dpkg-1.20.7.1/lib/dpkg/.deps/options-parsers.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/options-parsers.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/options-parsers.Plo	2021-06-09 18:25:02.905485036 -0500
@@ -0,0 +1,169 @@
+options-parsers.lo: options-parsers.c /usr/include/stdc-predef.h \
+ ../../config.h ../../lib/compat/compat.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/strings.h ../../lib/dpkg/dpkg-db.h /usr/include/sys/types.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg-spec.h \
+ ../../lib/dpkg/options.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg-spec.h:
+
+../../lib/dpkg/options.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/options.Plo dpkg-1.20.7.1/lib/dpkg/.deps/options.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/options.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/options.Plo	2021-06-09 18:25:02.760484814 -0500
@@ -0,0 +1,254 @@
+options.lo: options.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/errno.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/dirent.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/dirent.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h \
+ ../../lib/dpkg/options.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/errno.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/options.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/pager.Plo dpkg-1.20.7.1/lib/dpkg/.deps/pager.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/pager.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/pager.Plo	2021-06-09 18:25:03.066485281 -0500
@@ -0,0 +1,259 @@
+pager.lo: pager.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdlib.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/string.h \
+ /usr/include/strings.h /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/dpkg.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h ../../lib/dpkg/i18n.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/subproc.h \
+ ../../lib/dpkg/command.h ../../lib/dpkg/pager.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/subproc.h:
+
+../../lib/dpkg/command.h:
+
+../../lib/dpkg/pager.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/parsehelp.Plo dpkg-1.20.7.1/lib/dpkg/.deps/parsehelp.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/parsehelp.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/parsehelp.Plo	2021-06-09 18:25:03.605486104 -0500
@@ -0,0 +1,259 @@
+parsehelp.lo: parsehelp.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/errno.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/dpkg.h ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h \
+ ../../lib/dpkg/dpkg-db.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/parsedump.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/errno.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/parsedump.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/parse.Plo dpkg-1.20.7.1/lib/dpkg/.deps/parse.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/parse.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/parse.Plo	2021-06-09 18:25:03.379485759 -0500
@@ -0,0 +1,277 @@
+parse.lo: parse.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h /usr/include/bits/types/__fpos_t.h \
+ /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h ../../lib/dpkg/i18n.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/dpkg.h ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h \
+ ../../lib/dpkg/dpkg-db.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg.h ../../lib/dpkg/parsedump.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h ../../lib/dpkg/fdio.h \
+ ../../lib/dpkg/buffer.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg.h:
+
+../../lib/dpkg/parsedump.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+../../lib/dpkg/fdio.h:
+
+../../lib/dpkg/buffer.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/path.Plo dpkg-1.20.7.1/lib/dpkg/.deps/path.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/path.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/path.Plo	2021-06-09 18:25:03.768486353 -0500
@@ -0,0 +1,182 @@
+path.lo: path.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/string.h /usr/include/strings.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/dpkg.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/path.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/path.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/path-remove.Plo dpkg-1.20.7.1/lib/dpkg/.deps/path-remove.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/path-remove.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/path-remove.Plo	2021-06-09 18:25:03.930486600 -0500
@@ -0,0 +1,213 @@
+path-remove.lo: path-remove.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/stat.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/errno.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/dpkg.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/path.h ../../lib/dpkg/debug.h \
+ ../../lib/dpkg/subproc.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/path.h:
+
+../../lib/dpkg/debug.h:
+
+../../lib/dpkg/subproc.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-array.Plo dpkg-1.20.7.1/lib/dpkg/.deps/pkg-array.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-array.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/pkg-array.Plo	2021-06-09 18:25:04.254487094 -0500
@@ -0,0 +1,198 @@
+pkg-array.lo: pkg-array.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg-spec.h \
+ ../../lib/dpkg/pkg-array.h ../../lib/dpkg/pkg.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg-spec.h:
+
+../../lib/dpkg/pkg-array.h:
+
+../../lib/dpkg/pkg.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-files.Plo dpkg-1.20.7.1/lib/dpkg/.deps/pkg-files.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-files.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/pkg-files.Plo	2021-06-09 18:25:04.405487325 -0500
@@ -0,0 +1,192 @@
+pkg-files.lo: pkg-files.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/strings.h ../../lib/dpkg/dpkg.h /usr/include/sys/types.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg-list.h \
+ ../../lib/dpkg/pkg-files.h ../../lib/dpkg/fsys.h ../../lib/dpkg/file.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg-list.h:
+
+../../lib/dpkg/pkg-files.h:
+
+../../lib/dpkg/fsys.h:
+
+../../lib/dpkg/file.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-format.Plo dpkg-1.20.7.1/lib/dpkg/.deps/pkg-format.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-format.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/pkg-format.Plo	2021-06-09 18:25:04.625487661 -0500
@@ -0,0 +1,294 @@
+pkg-format.lo: pkg-format.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/error.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/dpkg.h ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h \
+ ../../lib/dpkg/dpkg-db.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/db-ctrl.h ../../lib/dpkg/db-fsys.h ../../lib/dpkg/file.h \
+ ../../lib/dpkg/fsys.h ../../lib/dpkg/parsedump.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h ../../lib/dpkg/pkg-show.h \
+ ../../lib/dpkg/pkg-format.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/error.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/db-ctrl.h:
+
+../../lib/dpkg/db-fsys.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/fsys.h:
+
+../../lib/dpkg/parsedump.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+../../lib/dpkg/pkg-show.h:
+
+../../lib/dpkg/pkg-format.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-hash.Plo dpkg-1.20.7.1/lib/dpkg/.deps/pkg-hash.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-hash.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/pkg-hash.Plo	2021-06-09 18:25:04.830487974 -0500
@@ -0,0 +1,206 @@
+pkg-hash.lo: pkg-hash.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h \
+ ../../lib/dpkg/dpkg-db.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-list.Plo dpkg-1.20.7.1/lib/dpkg/.deps/pkg-list.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-list.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/pkg-list.Plo	2021-06-09 18:25:04.979488201 -0500
@@ -0,0 +1,193 @@
+pkg-list.lo: pkg-list.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h /usr/include/string.h /usr/include/strings.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg-list.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg-list.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-namevalue.Plo dpkg-1.20.7.1/lib/dpkg/.deps/pkg-namevalue.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-namevalue.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/pkg-namevalue.Plo	2021-06-09 18:25:05.113488406 -0500
@@ -0,0 +1,152 @@
+pkg-namevalue.lo: pkg-namevalue.c /usr/include/stdc-predef.h \
+ ../../config.h ../../lib/compat/compat.h ../../lib/dpkg/dpkg-db.h \
+ /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdio.h /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/varbuf.h /usr/include/string.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/varbuf.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg.Plo dpkg-1.20.7.1/lib/dpkg/.deps/pkg.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/pkg.Plo	2021-06-09 18:25:04.095486852 -0500
@@ -0,0 +1,163 @@
+pkg.lo: pkg.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h /usr/include/bits/types/__sigset_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ ../../lib/dpkg/macros.h ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/dpkg-db.h /usr/include/sys/types.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/stdio.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-queue.Plo dpkg-1.20.7.1/lib/dpkg/.deps/pkg-queue.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-queue.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/pkg-queue.Plo	2021-06-09 18:25:05.260488630 -0500
@@ -0,0 +1,177 @@
+pkg-queue.lo: pkg-queue.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/dpkg-db.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/varbuf.h /usr/include/string.h /usr/include/strings.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg-queue.h \
+ ../../lib/dpkg/pkg-list.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/varbuf.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg-queue.h:
+
+../../lib/dpkg/pkg-list.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-show.Plo dpkg-1.20.7.1/lib/dpkg/.deps/pkg-show.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-show.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/pkg-show.Plo	2021-06-09 18:25:05.445488913 -0500
@@ -0,0 +1,185 @@
+pkg-show.lo: pkg-show.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h ../../lib/dpkg/macros.h ../../lib/dpkg/i18n.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/dpkg.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg-show.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg-show.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-spec.Plo dpkg-1.20.7.1/lib/dpkg/.deps/pkg-spec.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/pkg-spec.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/pkg-spec.Plo	2021-06-09 18:25:05.637489205 -0500
@@ -0,0 +1,207 @@
+pkg-spec.lo: pkg-spec.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/fnmatch.h /usr/include/string.h /usr/include/strings.h \
+ ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg-spec.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/fnmatch.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg-spec.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/progname.Plo dpkg-1.20.7.1/lib/dpkg/.deps/progname.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/progname.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/progname.Plo	2021-06-09 18:25:05.779489422 -0500
@@ -0,0 +1,144 @@
+progname.lo: progname.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/errno.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/path.h /usr/include/sys/stat.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/errno.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/path.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/program.Plo dpkg-1.20.7.1/lib/dpkg/.deps/program.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/program.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/program.Plo	2021-06-09 18:25:05.915489630 -0500
@@ -0,0 +1,102 @@
+program.lo: program.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/stat.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/stdio.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/macros.h ../../lib/dpkg/report.h ../../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ /usr/include/bits/types/__sigset_t.h ../../lib/dpkg/program.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+../../lib/dpkg/program.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/progress.Plo dpkg-1.20.7.1/lib/dpkg/.deps/progress.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/progress.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/progress.Plo	2021-06-09 18:25:06.059489850 -0500
@@ -0,0 +1,114 @@
+progress.lo: progress.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/unistd.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdio.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/string.h \
+ /usr/include/strings.h progress.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/unistd.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+progress.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/report.Plo dpkg-1.20.7.1/lib/dpkg/.deps/report.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/report.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/report.Plo	2021-06-09 18:25:06.219490094 -0500
@@ -0,0 +1,204 @@
+report.lo: report.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/stdlib.h /usr/include/bits/libc-header-start.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h /usr/include/bits/types/__fpos_t.h \
+ /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/dpkg.h \
+ ../../lib/dpkg/macros.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/i18n.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h /usr/include/string.h /usr/include/strings.h \
+ ../../lib/dpkg/color.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/color.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/strhash.Plo dpkg-1.20.7.1/lib/dpkg/.deps/strhash.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/strhash.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/strhash.Plo	2021-06-09 18:25:06.519490552 -0500
@@ -0,0 +1,19 @@
+strhash.lo: strhash.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/macros.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/macros.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/string.Plo dpkg-1.20.7.1/lib/dpkg/.deps/string.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/string.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/string.Plo	2021-06-09 18:25:06.385490347 -0500
@@ -0,0 +1,156 @@
+string.lo: string.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h ../../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/macros.h ../../lib/dpkg/string.h ../../lib/dpkg/dpkg.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/program.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/program.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/strwide.Plo dpkg-1.20.7.1/lib/dpkg/.deps/strwide.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/strwide.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/strwide.Plo	2021-06-09 18:25:06.669490781 -0500
@@ -0,0 +1,198 @@
+strwide.lo: strwide.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/wchar.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/wchar.h /usr/include/bits/types/wint_t.h \
+ /usr/include/bits/types/mbstate_t.h \
+ /usr/include/bits/types/__mbstate_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__fpos64_t.h \
+ /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/wchar.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/types/wint_t.h:
+
+/usr/include/bits/types/mbstate_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/subproc.Plo dpkg-1.20.7.1/lib/dpkg/.deps/subproc.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/subproc.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/subproc.Plo	2021-06-09 18:25:06.843491046 -0500
@@ -0,0 +1,274 @@
+subproc.lo: subproc.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/wait.h \
+ /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/dpkg.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/subproc.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/wait.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/subproc.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/tarfn.Plo dpkg-1.20.7.1/lib/dpkg/.deps/tarfn.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/tarfn.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/tarfn.Plo	2021-06-09 18:25:07.087491419 -0500
@@ -0,0 +1,258 @@
+tarfn.lo: tarfn.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/sysmacros.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/sysmacros.h /usr/include/sys/stat.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/errno.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/pwd.h /usr/include/bits/types/FILE.h \
+ /usr/include/grp.h /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/include/inttypes.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-intn.h /usr/include/bits/stdint-uintn.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h ../../lib/dpkg/dpkg.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/i18n.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/error.h ../../lib/dpkg/tarfn.h \
+ ../../lib/dpkg/file.h ../../lib/dpkg/varbuf.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/sysmacros.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/sysmacros.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/pwd.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/grp.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/inttypes.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/tarfn.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/varbuf.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/treewalk.Plo dpkg-1.20.7.1/lib/dpkg/.deps/treewalk.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/treewalk.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/treewalk.Plo	2021-06-09 18:25:07.302491747 -0500
@@ -0,0 +1,209 @@
+treewalk.lo: treewalk.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/stat.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h /usr/include/bits/posix1_lim.h \
+ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h ../../lib/dpkg/dpkg.h \
+ ../../lib/dpkg/macros.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h ../../lib/dpkg/i18n.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/treewalk.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/treewalk.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/trigdeferred.Plo dpkg-1.20.7.1/lib/dpkg/.deps/trigdeferred.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/trigdeferred.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/trigdeferred.Plo	2021-06-09 18:25:08.104492971 -0500
@@ -0,0 +1,283 @@
+trigdeferred.lo: trigdeferred.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/stat.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/errno.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/fcntl.h \
+ /usr/include/bits/fcntl.h /usr/include/bits/fcntl-linux.h \
+ /usr/include/bits/types/struct_iovec.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/linux/falloc.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/string.h /usr/include/strings.h ../../lib/dpkg/dpkg.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/c-ctype.h ../../lib/dpkg/file.h \
+ ../../lib/dpkg/dir.h /usr/include/dirent.h /usr/include/bits/dirent.h \
+ ../../lib/dpkg/trigdeferred.h ../../lib/dpkg/triglib.h \
+ ../../lib/dpkg/fsys.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/c-ctype.h:
+
+../../lib/dpkg/file.h:
+
+../../lib/dpkg/dir.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+../../lib/dpkg/trigdeferred.h:
+
+../../lib/dpkg/triglib.h:
+
+../../lib/dpkg/fsys.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/triglib.Plo dpkg-1.20.7.1/lib/dpkg/.deps/triglib.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/triglib.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/triglib.Plo	2021-06-09 18:25:07.895492652 -0500
@@ -0,0 +1,276 @@
+triglib.lo: triglib.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/stdlib.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../../lib/dpkg/i18n.h \
+ ../../lib/dpkg/macros.h ../../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/string.h /usr/include/strings.h ../../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/program.h \
+ ../../lib/dpkg/dpkg-db.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg.h ../../lib/dpkg/dlist.h \
+ ../../lib/dpkg/dir.h /usr/include/dirent.h /usr/include/bits/dirent.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h ../../lib/dpkg/pkg-spec.h \
+ ../../lib/dpkg/trigdeferred.h ../../lib/dpkg/triglib.h \
+ ../../lib/dpkg/fsys.h ../../lib/dpkg/file.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg.h:
+
+../../lib/dpkg/dlist.h:
+
+../../lib/dpkg/dir.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+../../lib/dpkg/pkg-spec.h:
+
+../../lib/dpkg/trigdeferred.h:
+
+../../lib/dpkg/triglib.h:
+
+../../lib/dpkg/fsys.h:
+
+../../lib/dpkg/file.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/trigname.Plo dpkg-1.20.7.1/lib/dpkg/.deps/trigname.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/trigname.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/trigname.Plo	2021-06-09 18:25:07.448491970 -0500
@@ -0,0 +1,170 @@
+trigname.lo: trigname.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/strings.h ../../lib/dpkg/triglib.h ../../lib/dpkg/dpkg-db.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/varbuf.h \
+ ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/fsys.h ../../lib/dpkg/file.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/triglib.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/fsys.h:
+
+../../lib/dpkg/file.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/trignote.Plo dpkg-1.20.7.1/lib/dpkg/.deps/trignote.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/trignote.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/trignote.Plo	2021-06-09 18:25:07.603492207 -0500
@@ -0,0 +1,185 @@
+trignote.lo: trignote.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h ../../lib/dpkg/dpkg.h /usr/include/sys/types.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/macros.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h ../../lib/dpkg/pkg.h ../../lib/dpkg/pkg-list.h \
+ ../../lib/dpkg/dlist.h ../../lib/dpkg/triglib.h ../../lib/dpkg/fsys.h \
+ ../../lib/dpkg/file.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
+
+../../lib/dpkg/pkg.h:
+
+../../lib/dpkg/pkg-list.h:
+
+../../lib/dpkg/dlist.h:
+
+../../lib/dpkg/triglib.h:
+
+../../lib/dpkg/fsys.h:
+
+../../lib/dpkg/file.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/utils.Plo dpkg-1.20.7.1/lib/dpkg/.deps/utils.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/utils.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/utils.Plo	2021-06-09 18:25:08.252493197 -0500
@@ -0,0 +1,166 @@
+utils.lo: utils.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/dpkg.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/progname.h \
+ ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/varbuf.Plo dpkg-1.20.7.1/lib/dpkg/.deps/varbuf.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/varbuf.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/varbuf.Plo	2021-06-09 18:25:08.431493471 -0500
@@ -0,0 +1,203 @@
+varbuf.lo: varbuf.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../../lib/dpkg/i18n.h ../../lib/dpkg/macros.h \
+ ../../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../../lib/dpkg/dpkg.h \
+ ../../lib/dpkg/progname.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../../lib/dpkg/report.h \
+ ../../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/program.h ../../lib/dpkg/dpkg-db.h \
+ ../../lib/dpkg/varbuf.h ../../lib/dpkg/version.h ../../lib/dpkg/arch.h \
+ ../../lib/dpkg/atomic-file.h ../../lib/dpkg/namevalue.h \
+ ../../lib/dpkg/error.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../../lib/dpkg/i18n.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../../lib/dpkg/dpkg.h:
+
+../../lib/dpkg/progname.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../../lib/dpkg/report.h:
+
+../../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/program.h:
+
+../../lib/dpkg/dpkg-db.h:
+
+../../lib/dpkg/varbuf.h:
+
+../../lib/dpkg/version.h:
+
+../../lib/dpkg/arch.h:
+
+../../lib/dpkg/atomic-file.h:
+
+../../lib/dpkg/namevalue.h:
+
+../../lib/dpkg/error.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/.deps/version.Plo dpkg-1.20.7.1/lib/dpkg/.deps/version.Plo
--- dpkg-1.20.7.1-orig/lib/dpkg/.deps/version.Plo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/.deps/version.Plo	2021-06-09 18:25:08.593493718 -0500
@@ -0,0 +1,51 @@
+version.lo: version.c /usr/include/stdc-predef.h ../../config.h \
+ ../../lib/compat/compat.h ../../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../../lib/dpkg/macros.h ../../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/setjmp.h /usr/include/bits/types/__sigset_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ ../../lib/dpkg/string.h ../../lib/dpkg/version.h
+
+/usr/include/stdc-predef.h:
+
+../../config.h:
+
+../../lib/compat/compat.h:
+
+../../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../../lib/dpkg/macros.h:
+
+../../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/setjmp.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+../../lib/dpkg/string.h:
+
+../../lib/dpkg/version.h:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/libdpkg.pc dpkg-1.20.7.1/lib/dpkg/libdpkg.pc
--- dpkg-1.20.7.1-orig/lib/dpkg/libdpkg.pc	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/libdpkg.pc	2021-06-09 18:24:51.916468262 -0500
@@ -0,0 +1,11 @@
+prefix=/usr
+exec_prefix=${prefix}
+libdir=${exec_prefix}/lib
+includedir=${prefix}/include
+
+Name: libdpkg
+Description: Debian package management system library
+Version: 1.20.7.1
+Libs: -L${libdir} -ldpkg
+Libs.private:  -lz -llzma -lbz2
+Cflags: -I${includedir}
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/Makefile dpkg-1.20.7.1/lib/dpkg/Makefile
--- dpkg-1.20.7.1-orig/lib/dpkg/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/Makefile	2021-06-09 18:24:51.908468250 -0500
@@ -0,0 +1,1314 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# lib/dpkg/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+am__append_1 = \
+	-Wl,--version-script=$(srcdir)/libdpkg.map
+
+#am__append_2 = \
+#	$(LIBINTL) \
+#	$(Z_LIBS) \
+#	$(LZMA_LIBS) \
+#	$(BZ2_LIBS)
+
+subdir = lib/dpkg
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(pkginclude_HEADERS) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = libdpkg.pc
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(devlibdir)" "$(DESTDIR)$(pkgconfigdir)" \
+	"$(DESTDIR)$(pkgincludedir)"
+LTLIBRARIES = $(devlib_LTLIBRARIES)
+am__DEPENDENCIES_1 =
+#am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) \
+#	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+#	$(am__DEPENDENCIES_1)
+libdpkg_la_DEPENDENCIES = ../compat/libcompat.la $(am__DEPENDENCIES_2)
+am_libdpkg_la_OBJECTS = ar.lo arch.lo atomic-file.lo buffer.lo \
+	c-ctype.lo cleanup.lo color.lo command.lo compress.lo dbdir.lo \
+	dbmodify.lo db-ctrl-access.lo db-ctrl-format.lo \
+	db-ctrl-upgrade.lo db-fsys-digest.lo db-fsys-divert.lo \
+	db-fsys-files.lo db-fsys-override.lo deb-version.lo debug.lo \
+	depcon.lo dir.lo dump.lo ehandle.lo error.lo fdio.lo file.lo \
+	fields.lo fsys-dir.lo fsys-iter.lo fsys-hash.lo glob.lo \
+	i18n.lo log.lo mlib.lo namevalue.lo nfmalloc.lo options.lo \
+	options-parsers.lo pager.lo parse.lo parsehelp.lo path.lo \
+	path-remove.lo pkg.lo pkg-array.lo pkg-files.lo pkg-format.lo \
+	pkg-hash.lo pkg-list.lo pkg-namevalue.lo pkg-queue.lo \
+	pkg-show.lo pkg-spec.lo progname.lo program.lo progress.lo \
+	report.lo string.lo strhash.lo strwide.lo subproc.lo tarfn.lo \
+	treewalk.lo trigname.lo trignote.lo triglib.lo trigdeferred.lo \
+	utils.lo varbuf.lo version.lo
+libdpkg_la_OBJECTS = $(am_libdpkg_la_OBJECTS)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+libdpkg_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libdpkg_la_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/ar.Plo ./$(DEPDIR)/arch.Plo \
+	./$(DEPDIR)/atomic-file.Plo ./$(DEPDIR)/buffer.Plo \
+	./$(DEPDIR)/c-ctype.Plo ./$(DEPDIR)/cleanup.Plo \
+	./$(DEPDIR)/color.Plo ./$(DEPDIR)/command.Plo \
+	./$(DEPDIR)/compress.Plo ./$(DEPDIR)/db-ctrl-access.Plo \
+	./$(DEPDIR)/db-ctrl-format.Plo ./$(DEPDIR)/db-ctrl-upgrade.Plo \
+	./$(DEPDIR)/db-fsys-digest.Plo ./$(DEPDIR)/db-fsys-divert.Plo \
+	./$(DEPDIR)/db-fsys-files.Plo ./$(DEPDIR)/db-fsys-override.Plo \
+	./$(DEPDIR)/dbdir.Plo ./$(DEPDIR)/dbmodify.Plo \
+	./$(DEPDIR)/deb-version.Plo ./$(DEPDIR)/debug.Plo \
+	./$(DEPDIR)/depcon.Plo ./$(DEPDIR)/dir.Plo \
+	./$(DEPDIR)/dump.Plo ./$(DEPDIR)/ehandle.Plo \
+	./$(DEPDIR)/error.Plo ./$(DEPDIR)/fdio.Plo \
+	./$(DEPDIR)/fields.Plo ./$(DEPDIR)/file.Plo \
+	./$(DEPDIR)/fsys-dir.Plo ./$(DEPDIR)/fsys-hash.Plo \
+	./$(DEPDIR)/fsys-iter.Plo ./$(DEPDIR)/glob.Plo \
+	./$(DEPDIR)/i18n.Plo ./$(DEPDIR)/log.Plo ./$(DEPDIR)/mlib.Plo \
+	./$(DEPDIR)/namevalue.Plo ./$(DEPDIR)/nfmalloc.Plo \
+	./$(DEPDIR)/options-parsers.Plo ./$(DEPDIR)/options.Plo \
+	./$(DEPDIR)/pager.Plo ./$(DEPDIR)/parse.Plo \
+	./$(DEPDIR)/parsehelp.Plo ./$(DEPDIR)/path-remove.Plo \
+	./$(DEPDIR)/path.Plo ./$(DEPDIR)/pkg-array.Plo \
+	./$(DEPDIR)/pkg-files.Plo ./$(DEPDIR)/pkg-format.Plo \
+	./$(DEPDIR)/pkg-hash.Plo ./$(DEPDIR)/pkg-list.Plo \
+	./$(DEPDIR)/pkg-namevalue.Plo ./$(DEPDIR)/pkg-queue.Plo \
+	./$(DEPDIR)/pkg-show.Plo ./$(DEPDIR)/pkg-spec.Plo \
+	./$(DEPDIR)/pkg.Plo ./$(DEPDIR)/progname.Plo \
+	./$(DEPDIR)/program.Plo ./$(DEPDIR)/progress.Plo \
+	./$(DEPDIR)/report.Plo ./$(DEPDIR)/strhash.Plo \
+	./$(DEPDIR)/string.Plo ./$(DEPDIR)/strwide.Plo \
+	./$(DEPDIR)/subproc.Plo ./$(DEPDIR)/tarfn.Plo \
+	./$(DEPDIR)/treewalk.Plo ./$(DEPDIR)/trigdeferred.Plo \
+	./$(DEPDIR)/triglib.Plo ./$(DEPDIR)/trigname.Plo \
+	./$(DEPDIR)/trignote.Plo ./$(DEPDIR)/utils.Plo \
+	./$(DEPDIR)/varbuf.Plo ./$(DEPDIR)/version.Plo
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libdpkg_la_SOURCES)
+DIST_SOURCES = $(libdpkg_la_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+DATA = $(pkgconfig_DATA)
+HEADERS = $(pkginclude_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir distdir-am
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/libdpkg.pc.in \
+	$(top_srcdir)/build-aux/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/lib/dpkg
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/lib/dpkg
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = $(datadir)/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = $(sysconfdir)/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../../
+top_builddir = ../..
+top_srcdir = ../..
+SUBDIRS = . t
+AM_CPPFLAGS = \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-DCONFIGDIR=\"$(pkgconfdir)\" \
+	-DADMINDIR=\"$(admindir)\" \
+	-DDEFAULT_TEXT_DOMAIN=\"dpkg\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+EXTRA_DIST = \
+	libdpkg.map \
+	libdpkg.pc.in
+
+pkgconfigdir = $(devlibdir)/pkgconfig
+pkgconfig_DATA = libdpkg.pc
+devlib_LTLIBRARIES = libdpkg.la
+libdpkg_la_LDFLAGS = $(am__append_1) $(MD_LIBS)
+libdpkg_la_LIBADD = ../compat/libcompat.la $(am__append_2)
+EXTRA_libdpkg_la_DEPENDENCIES = \
+	libdpkg.map
+
+libdpkg_la_SOURCES = \
+	dlist.h \
+	ar.c \
+	arch.c \
+	atomic-file.c \
+	buffer.c \
+	c-ctype.c \
+	cleanup.c \
+	color.c \
+	command.c \
+	compress.c \
+	dbdir.c \
+	dbmodify.c \
+	db-ctrl-access.c \
+	db-ctrl-format.c \
+	db-ctrl-upgrade.c \
+	db-fsys-digest.c \
+	db-fsys-divert.c \
+	db-fsys-files.c \
+	db-fsys-override.c \
+	deb-version.c \
+	debug.c \
+	depcon.c \
+	dir.c \
+	dump.c \
+	ehandle.c \
+	error.c \
+	fdio.c \
+	file.c \
+	fields.c \
+	fsys-dir.c\
+	fsys-iter.c \
+	fsys-hash.c \
+	glob.c \
+	i18n.c i18n.h \
+	log.c \
+	mlib.c \
+	namevalue.c \
+	nfmalloc.c \
+	options.c \
+	options-parsers.c \
+	pager.c \
+	parse.c \
+	parsehelp.c \
+	path.c \
+	path-remove.c \
+	perf.h \
+	pkg.c \
+	pkg-array.c \
+	pkg-files.c \
+	pkg-format.c \
+	pkg-hash.c \
+	pkg-list.c \
+	pkg-namevalue.c \
+	pkg-queue.c \
+	pkg-show.c \
+	pkg-spec.c \
+	progname.c \
+	program.c \
+	progress.c \
+	report.c \
+	string.c \
+	strhash.c \
+	strwide.c \
+	subproc.c \
+	tarfn.c \
+	test.h \
+	treewalk.c \
+	trigname.c \
+	trignote.c \
+	triglib.c \
+	trigdeferred.c \
+	utils.c \
+	varbuf.c \
+	version.c
+
+pkginclude_HEADERS = \
+	ar.h \
+	arch.h \
+	atomic-file.h \
+	buffer.h \
+	c-ctype.h \
+	color.h \
+	command.h \
+	compress.h \
+	db-ctrl.h \
+	db-fsys.h \
+	deb-version.h \
+	debug.h \
+	dir.h \
+	dpkg.h \
+	dpkg-db.h \
+	ehandle.h \
+	error.h \
+	fdio.h \
+	file.h \
+	fsys.h \
+	glob.h \
+	macros.h \
+	namevalue.h \
+	options.h \
+	pager.h \
+	parsedump.h \
+	path.h \
+	pkg.h \
+	pkg-array.h \
+	pkg-files.h \
+	pkg-format.h \
+	pkg-list.h \
+	pkg-queue.h \
+	pkg-show.h \
+	pkg-spec.h \
+	progname.h \
+	program.h \
+	progress.h \
+	report.h \
+	string.h \
+	subproc.h \
+	tarfn.h \
+	treewalk.h \
+	trigdeferred.h \
+	triglib.h \
+	varbuf.h \
+	version.h
+
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/dpkg/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign lib/dpkg/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+libdpkg.pc: $(top_builddir)/config.status $(srcdir)/libdpkg.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+install-devlibLTLIBRARIES: $(devlib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	@list='$(devlib_LTLIBRARIES)'; test -n "$(devlibdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(devlibdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(devlibdir)" || exit 1; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(devlibdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(devlibdir)"; \
+	}
+
+uninstall-devlibLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(devlib_LTLIBRARIES)'; test -n "$(devlibdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(devlibdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(devlibdir)/$$f"; \
+	done
+
+clean-devlibLTLIBRARIES:
+	-test -z "$(devlib_LTLIBRARIES)" || rm -f $(devlib_LTLIBRARIES)
+	@list='$(devlib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
+libdpkg.la: $(libdpkg_la_OBJECTS) $(libdpkg_la_DEPENDENCIES) $(EXTRA_libdpkg_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(libdpkg_la_LINK) -rpath $(devlibdir) $(libdpkg_la_OBJECTS) $(libdpkg_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/ar.Plo # am--include-marker
+include ./$(DEPDIR)/arch.Plo # am--include-marker
+include ./$(DEPDIR)/atomic-file.Plo # am--include-marker
+include ./$(DEPDIR)/buffer.Plo # am--include-marker
+include ./$(DEPDIR)/c-ctype.Plo # am--include-marker
+include ./$(DEPDIR)/cleanup.Plo # am--include-marker
+include ./$(DEPDIR)/color.Plo # am--include-marker
+include ./$(DEPDIR)/command.Plo # am--include-marker
+include ./$(DEPDIR)/compress.Plo # am--include-marker
+include ./$(DEPDIR)/db-ctrl-access.Plo # am--include-marker
+include ./$(DEPDIR)/db-ctrl-format.Plo # am--include-marker
+include ./$(DEPDIR)/db-ctrl-upgrade.Plo # am--include-marker
+include ./$(DEPDIR)/db-fsys-digest.Plo # am--include-marker
+include ./$(DEPDIR)/db-fsys-divert.Plo # am--include-marker
+include ./$(DEPDIR)/db-fsys-files.Plo # am--include-marker
+include ./$(DEPDIR)/db-fsys-override.Plo # am--include-marker
+include ./$(DEPDIR)/dbdir.Plo # am--include-marker
+include ./$(DEPDIR)/dbmodify.Plo # am--include-marker
+include ./$(DEPDIR)/deb-version.Plo # am--include-marker
+include ./$(DEPDIR)/debug.Plo # am--include-marker
+include ./$(DEPDIR)/depcon.Plo # am--include-marker
+include ./$(DEPDIR)/dir.Plo # am--include-marker
+include ./$(DEPDIR)/dump.Plo # am--include-marker
+include ./$(DEPDIR)/ehandle.Plo # am--include-marker
+include ./$(DEPDIR)/error.Plo # am--include-marker
+include ./$(DEPDIR)/fdio.Plo # am--include-marker
+include ./$(DEPDIR)/fields.Plo # am--include-marker
+include ./$(DEPDIR)/file.Plo # am--include-marker
+include ./$(DEPDIR)/fsys-dir.Plo # am--include-marker
+include ./$(DEPDIR)/fsys-hash.Plo # am--include-marker
+include ./$(DEPDIR)/fsys-iter.Plo # am--include-marker
+include ./$(DEPDIR)/glob.Plo # am--include-marker
+include ./$(DEPDIR)/i18n.Plo # am--include-marker
+include ./$(DEPDIR)/log.Plo # am--include-marker
+include ./$(DEPDIR)/mlib.Plo # am--include-marker
+include ./$(DEPDIR)/namevalue.Plo # am--include-marker
+include ./$(DEPDIR)/nfmalloc.Plo # am--include-marker
+include ./$(DEPDIR)/options-parsers.Plo # am--include-marker
+include ./$(DEPDIR)/options.Plo # am--include-marker
+include ./$(DEPDIR)/pager.Plo # am--include-marker
+include ./$(DEPDIR)/parse.Plo # am--include-marker
+include ./$(DEPDIR)/parsehelp.Plo # am--include-marker
+include ./$(DEPDIR)/path-remove.Plo # am--include-marker
+include ./$(DEPDIR)/path.Plo # am--include-marker
+include ./$(DEPDIR)/pkg-array.Plo # am--include-marker
+include ./$(DEPDIR)/pkg-files.Plo # am--include-marker
+include ./$(DEPDIR)/pkg-format.Plo # am--include-marker
+include ./$(DEPDIR)/pkg-hash.Plo # am--include-marker
+include ./$(DEPDIR)/pkg-list.Plo # am--include-marker
+include ./$(DEPDIR)/pkg-namevalue.Plo # am--include-marker
+include ./$(DEPDIR)/pkg-queue.Plo # am--include-marker
+include ./$(DEPDIR)/pkg-show.Plo # am--include-marker
+include ./$(DEPDIR)/pkg-spec.Plo # am--include-marker
+include ./$(DEPDIR)/pkg.Plo # am--include-marker
+include ./$(DEPDIR)/progname.Plo # am--include-marker
+include ./$(DEPDIR)/program.Plo # am--include-marker
+include ./$(DEPDIR)/progress.Plo # am--include-marker
+include ./$(DEPDIR)/report.Plo # am--include-marker
+include ./$(DEPDIR)/strhash.Plo # am--include-marker
+include ./$(DEPDIR)/string.Plo # am--include-marker
+include ./$(DEPDIR)/strwide.Plo # am--include-marker
+include ./$(DEPDIR)/subproc.Plo # am--include-marker
+include ./$(DEPDIR)/tarfn.Plo # am--include-marker
+include ./$(DEPDIR)/treewalk.Plo # am--include-marker
+include ./$(DEPDIR)/trigdeferred.Plo # am--include-marker
+include ./$(DEPDIR)/triglib.Plo # am--include-marker
+include ./$(DEPDIR)/trigname.Plo # am--include-marker
+include ./$(DEPDIR)/trignote.Plo # am--include-marker
+include ./$(DEPDIR)/utils.Plo # am--include-marker
+include ./$(DEPDIR)/varbuf.Plo # am--include-marker
+include ./$(DEPDIR)/version.Plo # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	$(AM_V_CC)source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
+install-pkgincludeHEADERS: $(pkginclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
+	done
+
+uninstall-pkgincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(LTLIBRARIES) $(DATA) $(HEADERS)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(devlibdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgincludedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-devlibLTLIBRARIES clean-generic clean-libtool \
+	mostlyclean-am
+
+distclean: distclean-recursive
+		-rm -f ./$(DEPDIR)/ar.Plo
+	-rm -f ./$(DEPDIR)/arch.Plo
+	-rm -f ./$(DEPDIR)/atomic-file.Plo
+	-rm -f ./$(DEPDIR)/buffer.Plo
+	-rm -f ./$(DEPDIR)/c-ctype.Plo
+	-rm -f ./$(DEPDIR)/cleanup.Plo
+	-rm -f ./$(DEPDIR)/color.Plo
+	-rm -f ./$(DEPDIR)/command.Plo
+	-rm -f ./$(DEPDIR)/compress.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-access.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-format.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-upgrade.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-digest.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-divert.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-files.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-override.Plo
+	-rm -f ./$(DEPDIR)/dbdir.Plo
+	-rm -f ./$(DEPDIR)/dbmodify.Plo
+	-rm -f ./$(DEPDIR)/deb-version.Plo
+	-rm -f ./$(DEPDIR)/debug.Plo
+	-rm -f ./$(DEPDIR)/depcon.Plo
+	-rm -f ./$(DEPDIR)/dir.Plo
+	-rm -f ./$(DEPDIR)/dump.Plo
+	-rm -f ./$(DEPDIR)/ehandle.Plo
+	-rm -f ./$(DEPDIR)/error.Plo
+	-rm -f ./$(DEPDIR)/fdio.Plo
+	-rm -f ./$(DEPDIR)/fields.Plo
+	-rm -f ./$(DEPDIR)/file.Plo
+	-rm -f ./$(DEPDIR)/fsys-dir.Plo
+	-rm -f ./$(DEPDIR)/fsys-hash.Plo
+	-rm -f ./$(DEPDIR)/fsys-iter.Plo
+	-rm -f ./$(DEPDIR)/glob.Plo
+	-rm -f ./$(DEPDIR)/i18n.Plo
+	-rm -f ./$(DEPDIR)/log.Plo
+	-rm -f ./$(DEPDIR)/mlib.Plo
+	-rm -f ./$(DEPDIR)/namevalue.Plo
+	-rm -f ./$(DEPDIR)/nfmalloc.Plo
+	-rm -f ./$(DEPDIR)/options-parsers.Plo
+	-rm -f ./$(DEPDIR)/options.Plo
+	-rm -f ./$(DEPDIR)/pager.Plo
+	-rm -f ./$(DEPDIR)/parse.Plo
+	-rm -f ./$(DEPDIR)/parsehelp.Plo
+	-rm -f ./$(DEPDIR)/path-remove.Plo
+	-rm -f ./$(DEPDIR)/path.Plo
+	-rm -f ./$(DEPDIR)/pkg-array.Plo
+	-rm -f ./$(DEPDIR)/pkg-files.Plo
+	-rm -f ./$(DEPDIR)/pkg-format.Plo
+	-rm -f ./$(DEPDIR)/pkg-hash.Plo
+	-rm -f ./$(DEPDIR)/pkg-list.Plo
+	-rm -f ./$(DEPDIR)/pkg-namevalue.Plo
+	-rm -f ./$(DEPDIR)/pkg-queue.Plo
+	-rm -f ./$(DEPDIR)/pkg-show.Plo
+	-rm -f ./$(DEPDIR)/pkg-spec.Plo
+	-rm -f ./$(DEPDIR)/pkg.Plo
+	-rm -f ./$(DEPDIR)/progname.Plo
+	-rm -f ./$(DEPDIR)/program.Plo
+	-rm -f ./$(DEPDIR)/progress.Plo
+	-rm -f ./$(DEPDIR)/report.Plo
+	-rm -f ./$(DEPDIR)/strhash.Plo
+	-rm -f ./$(DEPDIR)/string.Plo
+	-rm -f ./$(DEPDIR)/strwide.Plo
+	-rm -f ./$(DEPDIR)/subproc.Plo
+	-rm -f ./$(DEPDIR)/tarfn.Plo
+	-rm -f ./$(DEPDIR)/treewalk.Plo
+	-rm -f ./$(DEPDIR)/trigdeferred.Plo
+	-rm -f ./$(DEPDIR)/triglib.Plo
+	-rm -f ./$(DEPDIR)/trigname.Plo
+	-rm -f ./$(DEPDIR)/trignote.Plo
+	-rm -f ./$(DEPDIR)/utils.Plo
+	-rm -f ./$(DEPDIR)/varbuf.Plo
+	-rm -f ./$(DEPDIR)/version.Plo
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-devlibLTLIBRARIES install-pkgconfigDATA \
+	install-pkgincludeHEADERS
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+		-rm -f ./$(DEPDIR)/ar.Plo
+	-rm -f ./$(DEPDIR)/arch.Plo
+	-rm -f ./$(DEPDIR)/atomic-file.Plo
+	-rm -f ./$(DEPDIR)/buffer.Plo
+	-rm -f ./$(DEPDIR)/c-ctype.Plo
+	-rm -f ./$(DEPDIR)/cleanup.Plo
+	-rm -f ./$(DEPDIR)/color.Plo
+	-rm -f ./$(DEPDIR)/command.Plo
+	-rm -f ./$(DEPDIR)/compress.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-access.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-format.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-upgrade.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-digest.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-divert.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-files.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-override.Plo
+	-rm -f ./$(DEPDIR)/dbdir.Plo
+	-rm -f ./$(DEPDIR)/dbmodify.Plo
+	-rm -f ./$(DEPDIR)/deb-version.Plo
+	-rm -f ./$(DEPDIR)/debug.Plo
+	-rm -f ./$(DEPDIR)/depcon.Plo
+	-rm -f ./$(DEPDIR)/dir.Plo
+	-rm -f ./$(DEPDIR)/dump.Plo
+	-rm -f ./$(DEPDIR)/ehandle.Plo
+	-rm -f ./$(DEPDIR)/error.Plo
+	-rm -f ./$(DEPDIR)/fdio.Plo
+	-rm -f ./$(DEPDIR)/fields.Plo
+	-rm -f ./$(DEPDIR)/file.Plo
+	-rm -f ./$(DEPDIR)/fsys-dir.Plo
+	-rm -f ./$(DEPDIR)/fsys-hash.Plo
+	-rm -f ./$(DEPDIR)/fsys-iter.Plo
+	-rm -f ./$(DEPDIR)/glob.Plo
+	-rm -f ./$(DEPDIR)/i18n.Plo
+	-rm -f ./$(DEPDIR)/log.Plo
+	-rm -f ./$(DEPDIR)/mlib.Plo
+	-rm -f ./$(DEPDIR)/namevalue.Plo
+	-rm -f ./$(DEPDIR)/nfmalloc.Plo
+	-rm -f ./$(DEPDIR)/options-parsers.Plo
+	-rm -f ./$(DEPDIR)/options.Plo
+	-rm -f ./$(DEPDIR)/pager.Plo
+	-rm -f ./$(DEPDIR)/parse.Plo
+	-rm -f ./$(DEPDIR)/parsehelp.Plo
+	-rm -f ./$(DEPDIR)/path-remove.Plo
+	-rm -f ./$(DEPDIR)/path.Plo
+	-rm -f ./$(DEPDIR)/pkg-array.Plo
+	-rm -f ./$(DEPDIR)/pkg-files.Plo
+	-rm -f ./$(DEPDIR)/pkg-format.Plo
+	-rm -f ./$(DEPDIR)/pkg-hash.Plo
+	-rm -f ./$(DEPDIR)/pkg-list.Plo
+	-rm -f ./$(DEPDIR)/pkg-namevalue.Plo
+	-rm -f ./$(DEPDIR)/pkg-queue.Plo
+	-rm -f ./$(DEPDIR)/pkg-show.Plo
+	-rm -f ./$(DEPDIR)/pkg-spec.Plo
+	-rm -f ./$(DEPDIR)/pkg.Plo
+	-rm -f ./$(DEPDIR)/progname.Plo
+	-rm -f ./$(DEPDIR)/program.Plo
+	-rm -f ./$(DEPDIR)/progress.Plo
+	-rm -f ./$(DEPDIR)/report.Plo
+	-rm -f ./$(DEPDIR)/strhash.Plo
+	-rm -f ./$(DEPDIR)/string.Plo
+	-rm -f ./$(DEPDIR)/strwide.Plo
+	-rm -f ./$(DEPDIR)/subproc.Plo
+	-rm -f ./$(DEPDIR)/tarfn.Plo
+	-rm -f ./$(DEPDIR)/treewalk.Plo
+	-rm -f ./$(DEPDIR)/trigdeferred.Plo
+	-rm -f ./$(DEPDIR)/triglib.Plo
+	-rm -f ./$(DEPDIR)/trigname.Plo
+	-rm -f ./$(DEPDIR)/trignote.Plo
+	-rm -f ./$(DEPDIR)/utils.Plo
+	-rm -f ./$(DEPDIR)/varbuf.Plo
+	-rm -f ./$(DEPDIR)/version.Plo
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-devlibLTLIBRARIES uninstall-pkgconfigDATA \
+	uninstall-pkgincludeHEADERS
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--depfiles check check-am clean clean-devlibLTLIBRARIES \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-devlibLTLIBRARIES install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgconfigDATA \
+	install-pkgincludeHEADERS install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-devlibLTLIBRARIES \
+	uninstall-pkgconfigDATA uninstall-pkgincludeHEADERS
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/Makefile.in dpkg-1.20.7.1/lib/dpkg/Makefile.in
--- dpkg-1.20.7.1-orig/lib/dpkg/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/Makefile.in	2021-06-09 18:23:00.817296278 -0500
@@ -0,0 +1,1314 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@HAVE_LINKER_VERSION_SCRIPT_TRUE@am__append_1 = \
+@HAVE_LINKER_VERSION_SCRIPT_TRUE@	-Wl,--version-script=$(srcdir)/libdpkg.map
+
+@BUILD_SHARED_TRUE@am__append_2 = \
+@BUILD_SHARED_TRUE@	$(LIBINTL) \
+@BUILD_SHARED_TRUE@	$(Z_LIBS) \
+@BUILD_SHARED_TRUE@	$(LZMA_LIBS) \
+@BUILD_SHARED_TRUE@	$(BZ2_LIBS)
+
+subdir = lib/dpkg
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(pkginclude_HEADERS) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = libdpkg.pc
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(devlibdir)" "$(DESTDIR)$(pkgconfigdir)" \
+	"$(DESTDIR)$(pkgincludedir)"
+LTLIBRARIES = $(devlib_LTLIBRARIES)
+am__DEPENDENCIES_1 =
+@BUILD_SHARED_TRUE@am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) \
+@BUILD_SHARED_TRUE@	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
+@BUILD_SHARED_TRUE@	$(am__DEPENDENCIES_1)
+libdpkg_la_DEPENDENCIES = ../compat/libcompat.la $(am__DEPENDENCIES_2)
+am_libdpkg_la_OBJECTS = ar.lo arch.lo atomic-file.lo buffer.lo \
+	c-ctype.lo cleanup.lo color.lo command.lo compress.lo dbdir.lo \
+	dbmodify.lo db-ctrl-access.lo db-ctrl-format.lo \
+	db-ctrl-upgrade.lo db-fsys-digest.lo db-fsys-divert.lo \
+	db-fsys-files.lo db-fsys-override.lo deb-version.lo debug.lo \
+	depcon.lo dir.lo dump.lo ehandle.lo error.lo fdio.lo file.lo \
+	fields.lo fsys-dir.lo fsys-iter.lo fsys-hash.lo glob.lo \
+	i18n.lo log.lo mlib.lo namevalue.lo nfmalloc.lo options.lo \
+	options-parsers.lo pager.lo parse.lo parsehelp.lo path.lo \
+	path-remove.lo pkg.lo pkg-array.lo pkg-files.lo pkg-format.lo \
+	pkg-hash.lo pkg-list.lo pkg-namevalue.lo pkg-queue.lo \
+	pkg-show.lo pkg-spec.lo progname.lo program.lo progress.lo \
+	report.lo string.lo strhash.lo strwide.lo subproc.lo tarfn.lo \
+	treewalk.lo trigname.lo trignote.lo triglib.lo trigdeferred.lo \
+	utils.lo varbuf.lo version.lo
+libdpkg_la_OBJECTS = $(am_libdpkg_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+libdpkg_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libdpkg_la_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/ar.Plo ./$(DEPDIR)/arch.Plo \
+	./$(DEPDIR)/atomic-file.Plo ./$(DEPDIR)/buffer.Plo \
+	./$(DEPDIR)/c-ctype.Plo ./$(DEPDIR)/cleanup.Plo \
+	./$(DEPDIR)/color.Plo ./$(DEPDIR)/command.Plo \
+	./$(DEPDIR)/compress.Plo ./$(DEPDIR)/db-ctrl-access.Plo \
+	./$(DEPDIR)/db-ctrl-format.Plo ./$(DEPDIR)/db-ctrl-upgrade.Plo \
+	./$(DEPDIR)/db-fsys-digest.Plo ./$(DEPDIR)/db-fsys-divert.Plo \
+	./$(DEPDIR)/db-fsys-files.Plo ./$(DEPDIR)/db-fsys-override.Plo \
+	./$(DEPDIR)/dbdir.Plo ./$(DEPDIR)/dbmodify.Plo \
+	./$(DEPDIR)/deb-version.Plo ./$(DEPDIR)/debug.Plo \
+	./$(DEPDIR)/depcon.Plo ./$(DEPDIR)/dir.Plo \
+	./$(DEPDIR)/dump.Plo ./$(DEPDIR)/ehandle.Plo \
+	./$(DEPDIR)/error.Plo ./$(DEPDIR)/fdio.Plo \
+	./$(DEPDIR)/fields.Plo ./$(DEPDIR)/file.Plo \
+	./$(DEPDIR)/fsys-dir.Plo ./$(DEPDIR)/fsys-hash.Plo \
+	./$(DEPDIR)/fsys-iter.Plo ./$(DEPDIR)/glob.Plo \
+	./$(DEPDIR)/i18n.Plo ./$(DEPDIR)/log.Plo ./$(DEPDIR)/mlib.Plo \
+	./$(DEPDIR)/namevalue.Plo ./$(DEPDIR)/nfmalloc.Plo \
+	./$(DEPDIR)/options-parsers.Plo ./$(DEPDIR)/options.Plo \
+	./$(DEPDIR)/pager.Plo ./$(DEPDIR)/parse.Plo \
+	./$(DEPDIR)/parsehelp.Plo ./$(DEPDIR)/path-remove.Plo \
+	./$(DEPDIR)/path.Plo ./$(DEPDIR)/pkg-array.Plo \
+	./$(DEPDIR)/pkg-files.Plo ./$(DEPDIR)/pkg-format.Plo \
+	./$(DEPDIR)/pkg-hash.Plo ./$(DEPDIR)/pkg-list.Plo \
+	./$(DEPDIR)/pkg-namevalue.Plo ./$(DEPDIR)/pkg-queue.Plo \
+	./$(DEPDIR)/pkg-show.Plo ./$(DEPDIR)/pkg-spec.Plo \
+	./$(DEPDIR)/pkg.Plo ./$(DEPDIR)/progname.Plo \
+	./$(DEPDIR)/program.Plo ./$(DEPDIR)/progress.Plo \
+	./$(DEPDIR)/report.Plo ./$(DEPDIR)/strhash.Plo \
+	./$(DEPDIR)/string.Plo ./$(DEPDIR)/strwide.Plo \
+	./$(DEPDIR)/subproc.Plo ./$(DEPDIR)/tarfn.Plo \
+	./$(DEPDIR)/treewalk.Plo ./$(DEPDIR)/trigdeferred.Plo \
+	./$(DEPDIR)/triglib.Plo ./$(DEPDIR)/trigname.Plo \
+	./$(DEPDIR)/trignote.Plo ./$(DEPDIR)/utils.Plo \
+	./$(DEPDIR)/varbuf.Plo ./$(DEPDIR)/version.Plo
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(libdpkg_la_SOURCES)
+DIST_SOURCES = $(libdpkg_la_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+DATA = $(pkgconfig_DATA)
+HEADERS = $(pkginclude_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir distdir-am
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/libdpkg.pc.in \
+	$(top_srcdir)/build-aux/depcomp
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = $(datadir)/locale
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = $(sysconfdir)/@PACKAGE@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = . t
+AM_CPPFLAGS = \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-DCONFIGDIR=\"$(pkgconfdir)\" \
+	-DADMINDIR=\"$(admindir)\" \
+	-DDEFAULT_TEXT_DOMAIN=\"@PACKAGE@\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+EXTRA_DIST = \
+	libdpkg.map \
+	libdpkg.pc.in
+
+pkgconfigdir = $(devlibdir)/pkgconfig
+pkgconfig_DATA = libdpkg.pc
+devlib_LTLIBRARIES = libdpkg.la
+libdpkg_la_LDFLAGS = $(am__append_1) $(MD_LIBS)
+libdpkg_la_LIBADD = ../compat/libcompat.la $(am__append_2)
+EXTRA_libdpkg_la_DEPENDENCIES = \
+	libdpkg.map
+
+libdpkg_la_SOURCES = \
+	dlist.h \
+	ar.c \
+	arch.c \
+	atomic-file.c \
+	buffer.c \
+	c-ctype.c \
+	cleanup.c \
+	color.c \
+	command.c \
+	compress.c \
+	dbdir.c \
+	dbmodify.c \
+	db-ctrl-access.c \
+	db-ctrl-format.c \
+	db-ctrl-upgrade.c \
+	db-fsys-digest.c \
+	db-fsys-divert.c \
+	db-fsys-files.c \
+	db-fsys-override.c \
+	deb-version.c \
+	debug.c \
+	depcon.c \
+	dir.c \
+	dump.c \
+	ehandle.c \
+	error.c \
+	fdio.c \
+	file.c \
+	fields.c \
+	fsys-dir.c\
+	fsys-iter.c \
+	fsys-hash.c \
+	glob.c \
+	i18n.c i18n.h \
+	log.c \
+	mlib.c \
+	namevalue.c \
+	nfmalloc.c \
+	options.c \
+	options-parsers.c \
+	pager.c \
+	parse.c \
+	parsehelp.c \
+	path.c \
+	path-remove.c \
+	perf.h \
+	pkg.c \
+	pkg-array.c \
+	pkg-files.c \
+	pkg-format.c \
+	pkg-hash.c \
+	pkg-list.c \
+	pkg-namevalue.c \
+	pkg-queue.c \
+	pkg-show.c \
+	pkg-spec.c \
+	progname.c \
+	program.c \
+	progress.c \
+	report.c \
+	string.c \
+	strhash.c \
+	strwide.c \
+	subproc.c \
+	tarfn.c \
+	test.h \
+	treewalk.c \
+	trigname.c \
+	trignote.c \
+	triglib.c \
+	trigdeferred.c \
+	utils.c \
+	varbuf.c \
+	version.c
+
+pkginclude_HEADERS = \
+	ar.h \
+	arch.h \
+	atomic-file.h \
+	buffer.h \
+	c-ctype.h \
+	color.h \
+	command.h \
+	compress.h \
+	db-ctrl.h \
+	db-fsys.h \
+	deb-version.h \
+	debug.h \
+	dir.h \
+	dpkg.h \
+	dpkg-db.h \
+	ehandle.h \
+	error.h \
+	fdio.h \
+	file.h \
+	fsys.h \
+	glob.h \
+	macros.h \
+	namevalue.h \
+	options.h \
+	pager.h \
+	parsedump.h \
+	path.h \
+	pkg.h \
+	pkg-array.h \
+	pkg-files.h \
+	pkg-format.h \
+	pkg-list.h \
+	pkg-queue.h \
+	pkg-show.h \
+	pkg-spec.h \
+	progname.h \
+	program.h \
+	progress.h \
+	report.h \
+	string.h \
+	subproc.h \
+	tarfn.h \
+	treewalk.h \
+	trigdeferred.h \
+	triglib.h \
+	varbuf.h \
+	version.h
+
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/dpkg/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign lib/dpkg/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+libdpkg.pc: $(top_builddir)/config.status $(srcdir)/libdpkg.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+install-devlibLTLIBRARIES: $(devlib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	@list='$(devlib_LTLIBRARIES)'; test -n "$(devlibdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(devlibdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(devlibdir)" || exit 1; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(devlibdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(devlibdir)"; \
+	}
+
+uninstall-devlibLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(devlib_LTLIBRARIES)'; test -n "$(devlibdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(devlibdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(devlibdir)/$$f"; \
+	done
+
+clean-devlibLTLIBRARIES:
+	-test -z "$(devlib_LTLIBRARIES)" || rm -f $(devlib_LTLIBRARIES)
+	@list='$(devlib_LTLIBRARIES)'; \
+	locs=`for p in $$list; do echo $$p; done | \
+	      sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+	      sort -u`; \
+	test -z "$$locs" || { \
+	  echo rm -f $${locs}; \
+	  rm -f $${locs}; \
+	}
+
+libdpkg.la: $(libdpkg_la_OBJECTS) $(libdpkg_la_DEPENDENCIES) $(EXTRA_libdpkg_la_DEPENDENCIES) 
+	$(AM_V_CCLD)$(libdpkg_la_LINK) -rpath $(devlibdir) $(libdpkg_la_OBJECTS) $(libdpkg_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ar.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arch.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atomic-file.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/buffer.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/c-ctype.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cleanup.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/color.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/command.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/compress.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/db-ctrl-access.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/db-ctrl-format.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/db-ctrl-upgrade.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/db-fsys-digest.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/db-fsys-divert.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/db-fsys-files.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/db-fsys-override.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbdir.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbmodify.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/deb-version.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/debug.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/depcon.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dir.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dump.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ehandle.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/error.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fdio.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fields.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fsys-dir.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fsys-hash.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fsys-iter.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/glob.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i18n.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/log.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mlib.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/namevalue.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/nfmalloc.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/options-parsers.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/options.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pager.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parsehelp.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/path-remove.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/path.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkg-array.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkg-files.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkg-format.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkg-hash.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkg-list.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkg-namevalue.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkg-queue.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkg-show.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkg-spec.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkg.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/progname.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/program.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/progress.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/report.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strhash.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/string.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strwide.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/subproc.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tarfn.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/treewalk.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trigdeferred.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/triglib.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trigname.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trignote.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/varbuf.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Plo@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
+install-pkgincludeHEADERS: $(pkginclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
+	done
+
+uninstall-pkgincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(LTLIBRARIES) $(DATA) $(HEADERS)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(devlibdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgincludedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-devlibLTLIBRARIES clean-generic clean-libtool \
+	mostlyclean-am
+
+distclean: distclean-recursive
+		-rm -f ./$(DEPDIR)/ar.Plo
+	-rm -f ./$(DEPDIR)/arch.Plo
+	-rm -f ./$(DEPDIR)/atomic-file.Plo
+	-rm -f ./$(DEPDIR)/buffer.Plo
+	-rm -f ./$(DEPDIR)/c-ctype.Plo
+	-rm -f ./$(DEPDIR)/cleanup.Plo
+	-rm -f ./$(DEPDIR)/color.Plo
+	-rm -f ./$(DEPDIR)/command.Plo
+	-rm -f ./$(DEPDIR)/compress.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-access.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-format.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-upgrade.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-digest.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-divert.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-files.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-override.Plo
+	-rm -f ./$(DEPDIR)/dbdir.Plo
+	-rm -f ./$(DEPDIR)/dbmodify.Plo
+	-rm -f ./$(DEPDIR)/deb-version.Plo
+	-rm -f ./$(DEPDIR)/debug.Plo
+	-rm -f ./$(DEPDIR)/depcon.Plo
+	-rm -f ./$(DEPDIR)/dir.Plo
+	-rm -f ./$(DEPDIR)/dump.Plo
+	-rm -f ./$(DEPDIR)/ehandle.Plo
+	-rm -f ./$(DEPDIR)/error.Plo
+	-rm -f ./$(DEPDIR)/fdio.Plo
+	-rm -f ./$(DEPDIR)/fields.Plo
+	-rm -f ./$(DEPDIR)/file.Plo
+	-rm -f ./$(DEPDIR)/fsys-dir.Plo
+	-rm -f ./$(DEPDIR)/fsys-hash.Plo
+	-rm -f ./$(DEPDIR)/fsys-iter.Plo
+	-rm -f ./$(DEPDIR)/glob.Plo
+	-rm -f ./$(DEPDIR)/i18n.Plo
+	-rm -f ./$(DEPDIR)/log.Plo
+	-rm -f ./$(DEPDIR)/mlib.Plo
+	-rm -f ./$(DEPDIR)/namevalue.Plo
+	-rm -f ./$(DEPDIR)/nfmalloc.Plo
+	-rm -f ./$(DEPDIR)/options-parsers.Plo
+	-rm -f ./$(DEPDIR)/options.Plo
+	-rm -f ./$(DEPDIR)/pager.Plo
+	-rm -f ./$(DEPDIR)/parse.Plo
+	-rm -f ./$(DEPDIR)/parsehelp.Plo
+	-rm -f ./$(DEPDIR)/path-remove.Plo
+	-rm -f ./$(DEPDIR)/path.Plo
+	-rm -f ./$(DEPDIR)/pkg-array.Plo
+	-rm -f ./$(DEPDIR)/pkg-files.Plo
+	-rm -f ./$(DEPDIR)/pkg-format.Plo
+	-rm -f ./$(DEPDIR)/pkg-hash.Plo
+	-rm -f ./$(DEPDIR)/pkg-list.Plo
+	-rm -f ./$(DEPDIR)/pkg-namevalue.Plo
+	-rm -f ./$(DEPDIR)/pkg-queue.Plo
+	-rm -f ./$(DEPDIR)/pkg-show.Plo
+	-rm -f ./$(DEPDIR)/pkg-spec.Plo
+	-rm -f ./$(DEPDIR)/pkg.Plo
+	-rm -f ./$(DEPDIR)/progname.Plo
+	-rm -f ./$(DEPDIR)/program.Plo
+	-rm -f ./$(DEPDIR)/progress.Plo
+	-rm -f ./$(DEPDIR)/report.Plo
+	-rm -f ./$(DEPDIR)/strhash.Plo
+	-rm -f ./$(DEPDIR)/string.Plo
+	-rm -f ./$(DEPDIR)/strwide.Plo
+	-rm -f ./$(DEPDIR)/subproc.Plo
+	-rm -f ./$(DEPDIR)/tarfn.Plo
+	-rm -f ./$(DEPDIR)/treewalk.Plo
+	-rm -f ./$(DEPDIR)/trigdeferred.Plo
+	-rm -f ./$(DEPDIR)/triglib.Plo
+	-rm -f ./$(DEPDIR)/trigname.Plo
+	-rm -f ./$(DEPDIR)/trignote.Plo
+	-rm -f ./$(DEPDIR)/utils.Plo
+	-rm -f ./$(DEPDIR)/varbuf.Plo
+	-rm -f ./$(DEPDIR)/version.Plo
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-devlibLTLIBRARIES install-pkgconfigDATA \
+	install-pkgincludeHEADERS
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+		-rm -f ./$(DEPDIR)/ar.Plo
+	-rm -f ./$(DEPDIR)/arch.Plo
+	-rm -f ./$(DEPDIR)/atomic-file.Plo
+	-rm -f ./$(DEPDIR)/buffer.Plo
+	-rm -f ./$(DEPDIR)/c-ctype.Plo
+	-rm -f ./$(DEPDIR)/cleanup.Plo
+	-rm -f ./$(DEPDIR)/color.Plo
+	-rm -f ./$(DEPDIR)/command.Plo
+	-rm -f ./$(DEPDIR)/compress.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-access.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-format.Plo
+	-rm -f ./$(DEPDIR)/db-ctrl-upgrade.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-digest.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-divert.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-files.Plo
+	-rm -f ./$(DEPDIR)/db-fsys-override.Plo
+	-rm -f ./$(DEPDIR)/dbdir.Plo
+	-rm -f ./$(DEPDIR)/dbmodify.Plo
+	-rm -f ./$(DEPDIR)/deb-version.Plo
+	-rm -f ./$(DEPDIR)/debug.Plo
+	-rm -f ./$(DEPDIR)/depcon.Plo
+	-rm -f ./$(DEPDIR)/dir.Plo
+	-rm -f ./$(DEPDIR)/dump.Plo
+	-rm -f ./$(DEPDIR)/ehandle.Plo
+	-rm -f ./$(DEPDIR)/error.Plo
+	-rm -f ./$(DEPDIR)/fdio.Plo
+	-rm -f ./$(DEPDIR)/fields.Plo
+	-rm -f ./$(DEPDIR)/file.Plo
+	-rm -f ./$(DEPDIR)/fsys-dir.Plo
+	-rm -f ./$(DEPDIR)/fsys-hash.Plo
+	-rm -f ./$(DEPDIR)/fsys-iter.Plo
+	-rm -f ./$(DEPDIR)/glob.Plo
+	-rm -f ./$(DEPDIR)/i18n.Plo
+	-rm -f ./$(DEPDIR)/log.Plo
+	-rm -f ./$(DEPDIR)/mlib.Plo
+	-rm -f ./$(DEPDIR)/namevalue.Plo
+	-rm -f ./$(DEPDIR)/nfmalloc.Plo
+	-rm -f ./$(DEPDIR)/options-parsers.Plo
+	-rm -f ./$(DEPDIR)/options.Plo
+	-rm -f ./$(DEPDIR)/pager.Plo
+	-rm -f ./$(DEPDIR)/parse.Plo
+	-rm -f ./$(DEPDIR)/parsehelp.Plo
+	-rm -f ./$(DEPDIR)/path-remove.Plo
+	-rm -f ./$(DEPDIR)/path.Plo
+	-rm -f ./$(DEPDIR)/pkg-array.Plo
+	-rm -f ./$(DEPDIR)/pkg-files.Plo
+	-rm -f ./$(DEPDIR)/pkg-format.Plo
+	-rm -f ./$(DEPDIR)/pkg-hash.Plo
+	-rm -f ./$(DEPDIR)/pkg-list.Plo
+	-rm -f ./$(DEPDIR)/pkg-namevalue.Plo
+	-rm -f ./$(DEPDIR)/pkg-queue.Plo
+	-rm -f ./$(DEPDIR)/pkg-show.Plo
+	-rm -f ./$(DEPDIR)/pkg-spec.Plo
+	-rm -f ./$(DEPDIR)/pkg.Plo
+	-rm -f ./$(DEPDIR)/progname.Plo
+	-rm -f ./$(DEPDIR)/program.Plo
+	-rm -f ./$(DEPDIR)/progress.Plo
+	-rm -f ./$(DEPDIR)/report.Plo
+	-rm -f ./$(DEPDIR)/strhash.Plo
+	-rm -f ./$(DEPDIR)/string.Plo
+	-rm -f ./$(DEPDIR)/strwide.Plo
+	-rm -f ./$(DEPDIR)/subproc.Plo
+	-rm -f ./$(DEPDIR)/tarfn.Plo
+	-rm -f ./$(DEPDIR)/treewalk.Plo
+	-rm -f ./$(DEPDIR)/trigdeferred.Plo
+	-rm -f ./$(DEPDIR)/triglib.Plo
+	-rm -f ./$(DEPDIR)/trigname.Plo
+	-rm -f ./$(DEPDIR)/trignote.Plo
+	-rm -f ./$(DEPDIR)/utils.Plo
+	-rm -f ./$(DEPDIR)/varbuf.Plo
+	-rm -f ./$(DEPDIR)/version.Plo
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-devlibLTLIBRARIES uninstall-pkgconfigDATA \
+	uninstall-pkgincludeHEADERS
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--depfiles check check-am clean clean-devlibLTLIBRARIES \
+	clean-generic clean-libtool cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-devlibLTLIBRARIES install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgconfigDATA \
+	install-pkgincludeHEADERS install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	uninstall-am uninstall-devlibLTLIBRARIES \
+	uninstall-pkgconfigDATA uninstall-pkgincludeHEADERS
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/b-fsys-hash.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/b-fsys-hash.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/b-fsys-hash.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/b-fsys-hash.Po	2021-06-09 18:23:51.616375765 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/b-pkg-hash.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/b-pkg-hash.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/b-pkg-hash.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/b-pkg-hash.Po	2021-06-09 18:23:51.618375768 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/c-tarextract.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/c-tarextract.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/c-tarextract.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/c-tarextract.Po	2021-06-09 18:23:51.619375770 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/c-treewalk.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/c-treewalk.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/c-treewalk.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/c-treewalk.Po	2021-06-09 18:23:51.620375771 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/c-trigdeferred.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/c-trigdeferred.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/c-trigdeferred.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/c-trigdeferred.Po	2021-06-09 18:23:51.622375774 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-arch.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-arch.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-arch.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-arch.Po	2021-06-09 18:23:51.624375777 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-ar.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-ar.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-ar.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-ar.Po	2021-06-09 18:23:51.623375776 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-buffer.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-buffer.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-buffer.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-buffer.Po	2021-06-09 18:23:51.626375781 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-c-ctype.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-c-ctype.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-c-ctype.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-c-ctype.Po	2021-06-09 18:23:51.627375782 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-command.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-command.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-command.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-command.Po	2021-06-09 18:23:51.628375784 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-deb-version.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-deb-version.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-deb-version.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-deb-version.Po	2021-06-09 18:23:51.629375785 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-ehandle.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-ehandle.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-ehandle.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-ehandle.Po	2021-06-09 18:23:51.631375788 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-error.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-error.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-error.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-error.Po	2021-06-09 18:23:51.632375790 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-file.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-file.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-file.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-file.Po	2021-06-09 18:23:51.633375792 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-fsys-dir.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-fsys-dir.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-fsys-dir.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-fsys-dir.Po	2021-06-09 18:23:51.635375794 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-fsys-hash.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-fsys-hash.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-fsys-hash.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-fsys-hash.Po	2021-06-09 18:23:51.636375796 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-headers-cpp.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-headers-cpp.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-headers-cpp.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-headers-cpp.Po	2021-06-09 18:23:51.637375798 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-macros.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-macros.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-macros.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-macros.Po	2021-06-09 18:23:51.639375801 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-mod-db.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-mod-db.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-mod-db.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-mod-db.Po	2021-06-09 18:23:51.640375802 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-namevalue.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-namevalue.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-namevalue.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-namevalue.Po	2021-06-09 18:23:51.641375804 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pager.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pager.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pager.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pager.Po	2021-06-09 18:23:51.643375807 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-path.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-path.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-path.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-path.Po	2021-06-09 18:23:51.644375809 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pkg-hash.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pkg-hash.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pkg-hash.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pkg-hash.Po	2021-06-09 18:23:51.645375810 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pkginfo.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pkginfo.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pkginfo.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pkginfo.Po	2021-06-09 18:23:51.650375818 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pkg-list.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pkg-list.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pkg-list.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pkg-list.Po	2021-06-09 18:23:51.646375812 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pkg-queue.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pkg-queue.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pkg-queue.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pkg-queue.Po	2021-06-09 18:23:51.648375815 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pkg-show.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pkg-show.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-pkg-show.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-pkg-show.Po	2021-06-09 18:23:51.649375816 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-progname.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-progname.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-progname.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-progname.Po	2021-06-09 18:23:51.652375821 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-string.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-string.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-string.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-string.Po	2021-06-09 18:23:51.653375823 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-subproc.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-subproc.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-subproc.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-subproc.Po	2021-06-09 18:23:51.654375824 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-tar.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-tar.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-tar.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-tar.Po	2021-06-09 18:23:51.656375827 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-test.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-test.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-test.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-test.Po	2021-06-09 18:23:51.658375831 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-test-skip.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-test-skip.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-test-skip.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-test-skip.Po	2021-06-09 18:23:51.657375829 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-trigger.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-trigger.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-trigger.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-trigger.Po	2021-06-09 18:23:51.660375834 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-varbuf.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-varbuf.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-varbuf.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-varbuf.Po	2021-06-09 18:23:51.661375835 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-version.Po dpkg-1.20.7.1/lib/dpkg/t/.deps/t-version.Po
--- dpkg-1.20.7.1-orig/lib/dpkg/t/.deps/t-version.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/.deps/t-version.Po	2021-06-09 18:23:51.662375837 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/Makefile dpkg-1.20.7.1/lib/dpkg/t/Makefile
--- dpkg-1.20.7.1-orig/lib/dpkg/t/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/Makefile	2021-06-09 18:24:51.926468278 -0500
@@ -0,0 +1,1290 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# lib/dpkg/t/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# Variables to be defined:
+#
+#  TEST_VERBOSE - set to 0 (default) or 1 to control test suite verbosity
+#  TEST_PARALLEL - set to 1 (default) or N to control the parallel jobs
+#  TEST_ENV_VARS - environment variables to be set for the test suite
+#  TEST_COVERAGE - set to the perl module in charge of getting test coverage
+#  test_tmpdir - test suite temporary directory
+#  test_scripts - list of test case scripts
+#  test_programs - list of test case programs
+#  test_data - list of test data files
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+check_PROGRAMS = $(am__EXEEXT_1) b-fsys-hash$(EXEEXT) \
+	b-pkg-hash$(EXEEXT) c-tarextract$(EXEEXT) c-treewalk$(EXEEXT) \
+	c-trigdeferred$(EXEEXT)
+subdir = lib/dpkg/t
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__EXEEXT_1 = t-test$(EXEEXT) t-test-skip$(EXEEXT) t-macros$(EXEEXT) \
+	t-headers-cpp$(EXEEXT) t-c-ctype$(EXEEXT) t-namevalue$(EXEEXT) \
+	t-ehandle$(EXEEXT) t-error$(EXEEXT) t-string$(EXEEXT) \
+	t-file$(EXEEXT) t-buffer$(EXEEXT) t-path$(EXEEXT) \
+	t-progname$(EXEEXT) t-subproc$(EXEEXT) t-command$(EXEEXT) \
+	t-pager$(EXEEXT) t-varbuf$(EXEEXT) t-ar$(EXEEXT) \
+	t-tar$(EXEEXT) t-deb-version$(EXEEXT) t-arch$(EXEEXT) \
+	t-version$(EXEEXT) t-pkginfo$(EXEEXT) t-pkg-list$(EXEEXT) \
+	t-pkg-queue$(EXEEXT) t-pkg-hash$(EXEEXT) t-pkg-show$(EXEEXT) \
+	t-fsys-dir$(EXEEXT) t-fsys-hash$(EXEEXT) t-trigger$(EXEEXT) \
+	t-mod-db$(EXEEXT)
+b_fsys_hash_SOURCES = b-fsys-hash.c
+b_fsys_hash_OBJECTS = b-fsys-hash.$(OBJEXT)
+am__DEPENDENCIES_1 =
+am__DEPENDENCIES_2 = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+am__DEPENDENCIES_3 = $(am__DEPENDENCIES_2)
+b_fsys_hash_DEPENDENCIES = $(am__DEPENDENCIES_3)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+b_pkg_hash_SOURCES = b-pkg-hash.c
+b_pkg_hash_OBJECTS = b-pkg-hash.$(OBJEXT)
+b_pkg_hash_DEPENDENCIES = $(am__DEPENDENCIES_3)
+c_tarextract_SOURCES = c-tarextract.c
+c_tarextract_OBJECTS = c-tarextract.$(OBJEXT)
+c_tarextract_LDADD = $(LDADD)
+c_tarextract_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+c_treewalk_SOURCES = c-treewalk.c
+c_treewalk_OBJECTS = c-treewalk.$(OBJEXT)
+c_treewalk_LDADD = $(LDADD)
+c_treewalk_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+c_trigdeferred_SOURCES = c-trigdeferred.c
+c_trigdeferred_OBJECTS = c-trigdeferred.$(OBJEXT)
+c_trigdeferred_LDADD = $(LDADD)
+c_trigdeferred_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_ar_SOURCES = t-ar.c
+t_ar_OBJECTS = t-ar.$(OBJEXT)
+t_ar_LDADD = $(LDADD)
+t_ar_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_arch_SOURCES = t-arch.c
+t_arch_OBJECTS = t-arch.$(OBJEXT)
+t_arch_LDADD = $(LDADD)
+t_arch_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_buffer_SOURCES = t-buffer.c
+t_buffer_OBJECTS = t-buffer.$(OBJEXT)
+t_buffer_LDADD = $(LDADD)
+t_buffer_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_c_ctype_SOURCES = t-c-ctype.c
+t_c_ctype_OBJECTS = t-c-ctype.$(OBJEXT)
+t_c_ctype_LDADD = $(LDADD)
+t_c_ctype_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_command_SOURCES = t-command.c
+t_command_OBJECTS = t-command.$(OBJEXT)
+t_command_LDADD = $(LDADD)
+t_command_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_deb_version_SOURCES = t-deb-version.c
+t_deb_version_OBJECTS = t-deb-version.$(OBJEXT)
+t_deb_version_LDADD = $(LDADD)
+t_deb_version_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_ehandle_SOURCES = t-ehandle.c
+t_ehandle_OBJECTS = t-ehandle.$(OBJEXT)
+t_ehandle_LDADD = $(LDADD)
+t_ehandle_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_error_SOURCES = t-error.c
+t_error_OBJECTS = t-error.$(OBJEXT)
+t_error_LDADD = $(LDADD)
+t_error_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_file_SOURCES = t-file.c
+t_file_OBJECTS = t-file.$(OBJEXT)
+t_file_LDADD = $(LDADD)
+t_file_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_fsys_dir_SOURCES = t-fsys-dir.c
+t_fsys_dir_OBJECTS = t-fsys-dir.$(OBJEXT)
+t_fsys_dir_LDADD = $(LDADD)
+t_fsys_dir_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_fsys_hash_SOURCES = t-fsys-hash.c
+t_fsys_hash_OBJECTS = t-fsys-hash.$(OBJEXT)
+t_fsys_hash_LDADD = $(LDADD)
+t_fsys_hash_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+am_t_headers_cpp_OBJECTS = t-headers-cpp.$(OBJEXT)
+t_headers_cpp_OBJECTS = $(am_t_headers_cpp_OBJECTS)
+t_headers_cpp_LDADD = $(LDADD)
+t_headers_cpp_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_macros_SOURCES = t-macros.c
+t_macros_OBJECTS = t-macros.$(OBJEXT)
+t_macros_LDADD = $(LDADD)
+t_macros_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_mod_db_SOURCES = t-mod-db.c
+t_mod_db_OBJECTS = t-mod-db.$(OBJEXT)
+t_mod_db_LDADD = $(LDADD)
+t_mod_db_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_namevalue_SOURCES = t-namevalue.c
+t_namevalue_OBJECTS = t-namevalue.$(OBJEXT)
+t_namevalue_LDADD = $(LDADD)
+t_namevalue_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pager_SOURCES = t-pager.c
+t_pager_OBJECTS = t-pager.$(OBJEXT)
+t_pager_LDADD = $(LDADD)
+t_pager_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_path_SOURCES = t-path.c
+t_path_OBJECTS = t-path.$(OBJEXT)
+t_path_LDADD = $(LDADD)
+t_path_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pkg_hash_SOURCES = t-pkg-hash.c
+t_pkg_hash_OBJECTS = t-pkg-hash.$(OBJEXT)
+t_pkg_hash_LDADD = $(LDADD)
+t_pkg_hash_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pkg_list_SOURCES = t-pkg-list.c
+t_pkg_list_OBJECTS = t-pkg-list.$(OBJEXT)
+t_pkg_list_LDADD = $(LDADD)
+t_pkg_list_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pkg_queue_SOURCES = t-pkg-queue.c
+t_pkg_queue_OBJECTS = t-pkg-queue.$(OBJEXT)
+t_pkg_queue_LDADD = $(LDADD)
+t_pkg_queue_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pkg_show_SOURCES = t-pkg-show.c
+t_pkg_show_OBJECTS = t-pkg-show.$(OBJEXT)
+t_pkg_show_LDADD = $(LDADD)
+t_pkg_show_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pkginfo_SOURCES = t-pkginfo.c
+t_pkginfo_OBJECTS = t-pkginfo.$(OBJEXT)
+t_pkginfo_LDADD = $(LDADD)
+t_pkginfo_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_progname_SOURCES = t-progname.c
+t_progname_OBJECTS = t-progname.$(OBJEXT)
+t_progname_LDADD = $(LDADD)
+t_progname_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_string_SOURCES = t-string.c
+t_string_OBJECTS = t-string.$(OBJEXT)
+t_string_LDADD = $(LDADD)
+t_string_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_subproc_SOURCES = t-subproc.c
+t_subproc_OBJECTS = t-subproc.$(OBJEXT)
+t_subproc_LDADD = $(LDADD)
+t_subproc_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_tar_SOURCES = t-tar.c
+t_tar_OBJECTS = t-tar.$(OBJEXT)
+t_tar_LDADD = $(LDADD)
+t_tar_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_test_SOURCES = t-test.c
+t_test_OBJECTS = t-test.$(OBJEXT)
+t_test_LDADD = $(LDADD)
+t_test_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_test_skip_SOURCES = t-test-skip.c
+t_test_skip_OBJECTS = t-test-skip.$(OBJEXT)
+t_test_skip_LDADD = $(LDADD)
+t_test_skip_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_trigger_SOURCES = t-trigger.c
+t_trigger_OBJECTS = t-trigger.$(OBJEXT)
+t_trigger_LDADD = $(LDADD)
+t_trigger_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_varbuf_SOURCES = t-varbuf.c
+t_varbuf_OBJECTS = t-varbuf.$(OBJEXT)
+t_varbuf_LDADD = $(LDADD)
+t_varbuf_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_version_SOURCES = t-version.c
+t_version_OBJECTS = t-version.$(OBJEXT)
+t_version_LDADD = $(LDADD)
+t_version_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/b-fsys-hash.Po \
+	./$(DEPDIR)/b-pkg-hash.Po ./$(DEPDIR)/c-tarextract.Po \
+	./$(DEPDIR)/c-treewalk.Po ./$(DEPDIR)/c-trigdeferred.Po \
+	./$(DEPDIR)/t-ar.Po ./$(DEPDIR)/t-arch.Po \
+	./$(DEPDIR)/t-buffer.Po ./$(DEPDIR)/t-c-ctype.Po \
+	./$(DEPDIR)/t-command.Po ./$(DEPDIR)/t-deb-version.Po \
+	./$(DEPDIR)/t-ehandle.Po ./$(DEPDIR)/t-error.Po \
+	./$(DEPDIR)/t-file.Po ./$(DEPDIR)/t-fsys-dir.Po \
+	./$(DEPDIR)/t-fsys-hash.Po ./$(DEPDIR)/t-headers-cpp.Po \
+	./$(DEPDIR)/t-macros.Po ./$(DEPDIR)/t-mod-db.Po \
+	./$(DEPDIR)/t-namevalue.Po ./$(DEPDIR)/t-pager.Po \
+	./$(DEPDIR)/t-path.Po ./$(DEPDIR)/t-pkg-hash.Po \
+	./$(DEPDIR)/t-pkg-list.Po ./$(DEPDIR)/t-pkg-queue.Po \
+	./$(DEPDIR)/t-pkg-show.Po ./$(DEPDIR)/t-pkginfo.Po \
+	./$(DEPDIR)/t-progname.Po ./$(DEPDIR)/t-string.Po \
+	./$(DEPDIR)/t-subproc.Po ./$(DEPDIR)/t-tar.Po \
+	./$(DEPDIR)/t-test-skip.Po ./$(DEPDIR)/t-test.Po \
+	./$(DEPDIR)/t-trigger.Po ./$(DEPDIR)/t-varbuf.Po \
+	./$(DEPDIR)/t-version.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_CXX = $(am__v_CXX_$(V))
+am__v_CXX_ = $(am__v_CXX_$(AM_DEFAULT_VERBOSITY))
+am__v_CXX_0 = @echo "  CXX     " $@;
+am__v_CXX_1 = 
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CXXLD = $(am__v_CXXLD_$(V))
+am__v_CXXLD_ = $(am__v_CXXLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CXXLD_0 = @echo "  CXXLD   " $@;
+am__v_CXXLD_1 = 
+SOURCES = b-fsys-hash.c b-pkg-hash.c c-tarextract.c c-treewalk.c \
+	c-trigdeferred.c t-ar.c t-arch.c t-buffer.c t-c-ctype.c \
+	t-command.c t-deb-version.c t-ehandle.c t-error.c t-file.c \
+	t-fsys-dir.c t-fsys-hash.c $(t_headers_cpp_SOURCES) t-macros.c \
+	t-mod-db.c t-namevalue.c t-pager.c t-path.c t-pkg-hash.c \
+	t-pkg-list.c t-pkg-queue.c t-pkg-show.c t-pkginfo.c \
+	t-progname.c t-string.c t-subproc.c t-tar.c t-test.c \
+	t-test-skip.c t-trigger.c t-varbuf.c t-version.c
+DIST_SOURCES = b-fsys-hash.c b-pkg-hash.c c-tarextract.c c-treewalk.c \
+	c-trigdeferred.c t-ar.c t-arch.c t-buffer.c t-c-ctype.c \
+	t-command.c t-deb-version.c t-ehandle.c t-error.c t-file.c \
+	t-fsys-dir.c t-fsys-hash.c $(t_headers_cpp_SOURCES) t-macros.c \
+	t-mod-db.c t-namevalue.c t-pager.c t-path.c t-pkg-hash.c \
+	t-pkg-list.c t-pkg-queue.c t-pkg-show.c t-pkginfo.c \
+	t-progname.c t-string.c t-subproc.c t-tar.c t-test.c \
+	t-test-skip.c t-trigger.c t-varbuf.c t-version.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp $(top_srcdir)/check.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/lib/dpkg/t
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/lib/dpkg/t
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../../../
+top_builddir = ../../..
+top_srcdir = ../../..
+AM_CPPFLAGS = \
+	-DADMINDIR=\"$(admindir)\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+LDADD = \
+	$(top_builddir)/lib/dpkg/libdpkg.la \
+	$(LIBINTL)
+
+EXTRA_DIST = \
+	$(test_scripts) \
+	$(nil)
+
+TEST_ENV_VARS = \
+	DPKG_PROGTAR=$(TAR) \
+	$(nil)
+
+t_headers_cpp_SOURCES = t-headers-cpp.cc
+
+# The tests are sorted in order of increasing complexity.
+test_programs = \
+	t-test \
+	t-test-skip \
+	t-macros \
+	t-headers-cpp \
+	t-c-ctype \
+	t-namevalue \
+	t-ehandle \
+	t-error \
+	t-string \
+	t-file \
+	t-buffer \
+	t-path \
+	t-progname \
+	t-subproc \
+	t-command \
+	t-pager \
+	t-varbuf \
+	t-ar \
+	t-tar \
+	t-deb-version \
+	t-arch \
+	t-version \
+	t-pkginfo \
+	t-pkg-list \
+	t-pkg-queue \
+	t-pkg-hash \
+	t-pkg-show \
+	t-fsys-dir \
+	t-fsys-hash \
+	t-trigger \
+	t-mod-db \
+	$(nil)
+
+test_scripts = \
+	t-tarextract.t \
+	t-treewalk.t \
+	t-trigdeferred.t \
+	$(nil)
+
+BENCHMARK_LDADD_FLAGS = -lrt $(LDADD)
+b_fsys_hash_LDADD = $(BENCHMARK_LDADD_FLAGS)
+b_pkg_hash_LDADD = $(BENCHMARK_LDADD_FLAGS)
+test_tmpdir = t.tmp
+TEST_RUNNER = '\
+	my $$harness = TAP::Harness->new({ \
+	    exec => sub { my (undef, $$test) = @_; \
+	        return [ $$test ] if $$test !~ "\.t\$$" and -x $$test; \
+	        return }, \
+	    lib => [ "$(top_srcdir)/scripts", "$(top_srcdir)/dselect/methods"  ], \
+	    color => 1, \
+	    verbosity => $(TEST_VERBOSE), \
+	    jobs => $(TEST_PARALLEL), \
+	    failures => 1, \
+	}); \
+	my $$aggregate = $$harness->runtests(@ARGV); \
+	die "FAIL: test suite has errors\n" if $$aggregate->has_errors;'
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .cc .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/check.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/dpkg/t/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign lib/dpkg/t/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+$(top_srcdir)/check.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+b-fsys-hash$(EXEEXT): $(b_fsys_hash_OBJECTS) $(b_fsys_hash_DEPENDENCIES) $(EXTRA_b_fsys_hash_DEPENDENCIES) 
+	@rm -f b-fsys-hash$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(b_fsys_hash_OBJECTS) $(b_fsys_hash_LDADD) $(LIBS)
+
+b-pkg-hash$(EXEEXT): $(b_pkg_hash_OBJECTS) $(b_pkg_hash_DEPENDENCIES) $(EXTRA_b_pkg_hash_DEPENDENCIES) 
+	@rm -f b-pkg-hash$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(b_pkg_hash_OBJECTS) $(b_pkg_hash_LDADD) $(LIBS)
+
+c-tarextract$(EXEEXT): $(c_tarextract_OBJECTS) $(c_tarextract_DEPENDENCIES) $(EXTRA_c_tarextract_DEPENDENCIES) 
+	@rm -f c-tarextract$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(c_tarextract_OBJECTS) $(c_tarextract_LDADD) $(LIBS)
+
+c-treewalk$(EXEEXT): $(c_treewalk_OBJECTS) $(c_treewalk_DEPENDENCIES) $(EXTRA_c_treewalk_DEPENDENCIES) 
+	@rm -f c-treewalk$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(c_treewalk_OBJECTS) $(c_treewalk_LDADD) $(LIBS)
+
+c-trigdeferred$(EXEEXT): $(c_trigdeferred_OBJECTS) $(c_trigdeferred_DEPENDENCIES) $(EXTRA_c_trigdeferred_DEPENDENCIES) 
+	@rm -f c-trigdeferred$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(c_trigdeferred_OBJECTS) $(c_trigdeferred_LDADD) $(LIBS)
+
+t-ar$(EXEEXT): $(t_ar_OBJECTS) $(t_ar_DEPENDENCIES) $(EXTRA_t_ar_DEPENDENCIES) 
+	@rm -f t-ar$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_ar_OBJECTS) $(t_ar_LDADD) $(LIBS)
+
+t-arch$(EXEEXT): $(t_arch_OBJECTS) $(t_arch_DEPENDENCIES) $(EXTRA_t_arch_DEPENDENCIES) 
+	@rm -f t-arch$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_arch_OBJECTS) $(t_arch_LDADD) $(LIBS)
+
+t-buffer$(EXEEXT): $(t_buffer_OBJECTS) $(t_buffer_DEPENDENCIES) $(EXTRA_t_buffer_DEPENDENCIES) 
+	@rm -f t-buffer$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_buffer_OBJECTS) $(t_buffer_LDADD) $(LIBS)
+
+t-c-ctype$(EXEEXT): $(t_c_ctype_OBJECTS) $(t_c_ctype_DEPENDENCIES) $(EXTRA_t_c_ctype_DEPENDENCIES) 
+	@rm -f t-c-ctype$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_c_ctype_OBJECTS) $(t_c_ctype_LDADD) $(LIBS)
+
+t-command$(EXEEXT): $(t_command_OBJECTS) $(t_command_DEPENDENCIES) $(EXTRA_t_command_DEPENDENCIES) 
+	@rm -f t-command$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_command_OBJECTS) $(t_command_LDADD) $(LIBS)
+
+t-deb-version$(EXEEXT): $(t_deb_version_OBJECTS) $(t_deb_version_DEPENDENCIES) $(EXTRA_t_deb_version_DEPENDENCIES) 
+	@rm -f t-deb-version$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_deb_version_OBJECTS) $(t_deb_version_LDADD) $(LIBS)
+
+t-ehandle$(EXEEXT): $(t_ehandle_OBJECTS) $(t_ehandle_DEPENDENCIES) $(EXTRA_t_ehandle_DEPENDENCIES) 
+	@rm -f t-ehandle$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_ehandle_OBJECTS) $(t_ehandle_LDADD) $(LIBS)
+
+t-error$(EXEEXT): $(t_error_OBJECTS) $(t_error_DEPENDENCIES) $(EXTRA_t_error_DEPENDENCIES) 
+	@rm -f t-error$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_error_OBJECTS) $(t_error_LDADD) $(LIBS)
+
+t-file$(EXEEXT): $(t_file_OBJECTS) $(t_file_DEPENDENCIES) $(EXTRA_t_file_DEPENDENCIES) 
+	@rm -f t-file$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_file_OBJECTS) $(t_file_LDADD) $(LIBS)
+
+t-fsys-dir$(EXEEXT): $(t_fsys_dir_OBJECTS) $(t_fsys_dir_DEPENDENCIES) $(EXTRA_t_fsys_dir_DEPENDENCIES) 
+	@rm -f t-fsys-dir$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_fsys_dir_OBJECTS) $(t_fsys_dir_LDADD) $(LIBS)
+
+t-fsys-hash$(EXEEXT): $(t_fsys_hash_OBJECTS) $(t_fsys_hash_DEPENDENCIES) $(EXTRA_t_fsys_hash_DEPENDENCIES) 
+	@rm -f t-fsys-hash$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_fsys_hash_OBJECTS) $(t_fsys_hash_LDADD) $(LIBS)
+
+t-headers-cpp$(EXEEXT): $(t_headers_cpp_OBJECTS) $(t_headers_cpp_DEPENDENCIES) $(EXTRA_t_headers_cpp_DEPENDENCIES) 
+	@rm -f t-headers-cpp$(EXEEXT)
+	$(AM_V_CXXLD)$(CXXLINK) $(t_headers_cpp_OBJECTS) $(t_headers_cpp_LDADD) $(LIBS)
+
+t-macros$(EXEEXT): $(t_macros_OBJECTS) $(t_macros_DEPENDENCIES) $(EXTRA_t_macros_DEPENDENCIES) 
+	@rm -f t-macros$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_macros_OBJECTS) $(t_macros_LDADD) $(LIBS)
+
+t-mod-db$(EXEEXT): $(t_mod_db_OBJECTS) $(t_mod_db_DEPENDENCIES) $(EXTRA_t_mod_db_DEPENDENCIES) 
+	@rm -f t-mod-db$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_mod_db_OBJECTS) $(t_mod_db_LDADD) $(LIBS)
+
+t-namevalue$(EXEEXT): $(t_namevalue_OBJECTS) $(t_namevalue_DEPENDENCIES) $(EXTRA_t_namevalue_DEPENDENCIES) 
+	@rm -f t-namevalue$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_namevalue_OBJECTS) $(t_namevalue_LDADD) $(LIBS)
+
+t-pager$(EXEEXT): $(t_pager_OBJECTS) $(t_pager_DEPENDENCIES) $(EXTRA_t_pager_DEPENDENCIES) 
+	@rm -f t-pager$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pager_OBJECTS) $(t_pager_LDADD) $(LIBS)
+
+t-path$(EXEEXT): $(t_path_OBJECTS) $(t_path_DEPENDENCIES) $(EXTRA_t_path_DEPENDENCIES) 
+	@rm -f t-path$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_path_OBJECTS) $(t_path_LDADD) $(LIBS)
+
+t-pkg-hash$(EXEEXT): $(t_pkg_hash_OBJECTS) $(t_pkg_hash_DEPENDENCIES) $(EXTRA_t_pkg_hash_DEPENDENCIES) 
+	@rm -f t-pkg-hash$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pkg_hash_OBJECTS) $(t_pkg_hash_LDADD) $(LIBS)
+
+t-pkg-list$(EXEEXT): $(t_pkg_list_OBJECTS) $(t_pkg_list_DEPENDENCIES) $(EXTRA_t_pkg_list_DEPENDENCIES) 
+	@rm -f t-pkg-list$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pkg_list_OBJECTS) $(t_pkg_list_LDADD) $(LIBS)
+
+t-pkg-queue$(EXEEXT): $(t_pkg_queue_OBJECTS) $(t_pkg_queue_DEPENDENCIES) $(EXTRA_t_pkg_queue_DEPENDENCIES) 
+	@rm -f t-pkg-queue$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pkg_queue_OBJECTS) $(t_pkg_queue_LDADD) $(LIBS)
+
+t-pkg-show$(EXEEXT): $(t_pkg_show_OBJECTS) $(t_pkg_show_DEPENDENCIES) $(EXTRA_t_pkg_show_DEPENDENCIES) 
+	@rm -f t-pkg-show$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pkg_show_OBJECTS) $(t_pkg_show_LDADD) $(LIBS)
+
+t-pkginfo$(EXEEXT): $(t_pkginfo_OBJECTS) $(t_pkginfo_DEPENDENCIES) $(EXTRA_t_pkginfo_DEPENDENCIES) 
+	@rm -f t-pkginfo$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pkginfo_OBJECTS) $(t_pkginfo_LDADD) $(LIBS)
+
+t-progname$(EXEEXT): $(t_progname_OBJECTS) $(t_progname_DEPENDENCIES) $(EXTRA_t_progname_DEPENDENCIES) 
+	@rm -f t-progname$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_progname_OBJECTS) $(t_progname_LDADD) $(LIBS)
+
+t-string$(EXEEXT): $(t_string_OBJECTS) $(t_string_DEPENDENCIES) $(EXTRA_t_string_DEPENDENCIES) 
+	@rm -f t-string$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_string_OBJECTS) $(t_string_LDADD) $(LIBS)
+
+t-subproc$(EXEEXT): $(t_subproc_OBJECTS) $(t_subproc_DEPENDENCIES) $(EXTRA_t_subproc_DEPENDENCIES) 
+	@rm -f t-subproc$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_subproc_OBJECTS) $(t_subproc_LDADD) $(LIBS)
+
+t-tar$(EXEEXT): $(t_tar_OBJECTS) $(t_tar_DEPENDENCIES) $(EXTRA_t_tar_DEPENDENCIES) 
+	@rm -f t-tar$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_tar_OBJECTS) $(t_tar_LDADD) $(LIBS)
+
+t-test$(EXEEXT): $(t_test_OBJECTS) $(t_test_DEPENDENCIES) $(EXTRA_t_test_DEPENDENCIES) 
+	@rm -f t-test$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_test_OBJECTS) $(t_test_LDADD) $(LIBS)
+
+t-test-skip$(EXEEXT): $(t_test_skip_OBJECTS) $(t_test_skip_DEPENDENCIES) $(EXTRA_t_test_skip_DEPENDENCIES) 
+	@rm -f t-test-skip$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_test_skip_OBJECTS) $(t_test_skip_LDADD) $(LIBS)
+
+t-trigger$(EXEEXT): $(t_trigger_OBJECTS) $(t_trigger_DEPENDENCIES) $(EXTRA_t_trigger_DEPENDENCIES) 
+	@rm -f t-trigger$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_trigger_OBJECTS) $(t_trigger_LDADD) $(LIBS)
+
+t-varbuf$(EXEEXT): $(t_varbuf_OBJECTS) $(t_varbuf_DEPENDENCIES) $(EXTRA_t_varbuf_DEPENDENCIES) 
+	@rm -f t-varbuf$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_varbuf_OBJECTS) $(t_varbuf_LDADD) $(LIBS)
+
+t-version$(EXEEXT): $(t_version_OBJECTS) $(t_version_DEPENDENCIES) $(EXTRA_t_version_DEPENDENCIES) 
+	@rm -f t-version$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_version_OBJECTS) $(t_version_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/b-fsys-hash.Po # am--include-marker
+include ./$(DEPDIR)/b-pkg-hash.Po # am--include-marker
+include ./$(DEPDIR)/c-tarextract.Po # am--include-marker
+include ./$(DEPDIR)/c-treewalk.Po # am--include-marker
+include ./$(DEPDIR)/c-trigdeferred.Po # am--include-marker
+include ./$(DEPDIR)/t-ar.Po # am--include-marker
+include ./$(DEPDIR)/t-arch.Po # am--include-marker
+include ./$(DEPDIR)/t-buffer.Po # am--include-marker
+include ./$(DEPDIR)/t-c-ctype.Po # am--include-marker
+include ./$(DEPDIR)/t-command.Po # am--include-marker
+include ./$(DEPDIR)/t-deb-version.Po # am--include-marker
+include ./$(DEPDIR)/t-ehandle.Po # am--include-marker
+include ./$(DEPDIR)/t-error.Po # am--include-marker
+include ./$(DEPDIR)/t-file.Po # am--include-marker
+include ./$(DEPDIR)/t-fsys-dir.Po # am--include-marker
+include ./$(DEPDIR)/t-fsys-hash.Po # am--include-marker
+include ./$(DEPDIR)/t-headers-cpp.Po # am--include-marker
+include ./$(DEPDIR)/t-macros.Po # am--include-marker
+include ./$(DEPDIR)/t-mod-db.Po # am--include-marker
+include ./$(DEPDIR)/t-namevalue.Po # am--include-marker
+include ./$(DEPDIR)/t-pager.Po # am--include-marker
+include ./$(DEPDIR)/t-path.Po # am--include-marker
+include ./$(DEPDIR)/t-pkg-hash.Po # am--include-marker
+include ./$(DEPDIR)/t-pkg-list.Po # am--include-marker
+include ./$(DEPDIR)/t-pkg-queue.Po # am--include-marker
+include ./$(DEPDIR)/t-pkg-show.Po # am--include-marker
+include ./$(DEPDIR)/t-pkginfo.Po # am--include-marker
+include ./$(DEPDIR)/t-progname.Po # am--include-marker
+include ./$(DEPDIR)/t-string.Po # am--include-marker
+include ./$(DEPDIR)/t-subproc.Po # am--include-marker
+include ./$(DEPDIR)/t-tar.Po # am--include-marker
+include ./$(DEPDIR)/t-test-skip.Po # am--include-marker
+include ./$(DEPDIR)/t-test.Po # am--include-marker
+include ./$(DEPDIR)/t-trigger.Po # am--include-marker
+include ./$(DEPDIR)/t-varbuf.Po # am--include-marker
+include ./$(DEPDIR)/t-version.Po # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	$(AM_V_CC)source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $<
+
+.cc.o:
+	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CXX)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
+#	$(AM_V_CXX_no)$(CXXCOMPILE) -c -o $@ $<
+
+.cc.obj:
+	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CXX)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
+#	$(AM_V_CXX_no)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.cc.lo:
+	$(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	$(AM_V_CXX)source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) \
+#	$(AM_V_CXX_no)$(LTCXXCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-checkPROGRAMS clean-generic clean-libtool clean-local \
+	mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/b-fsys-hash.Po
+	-rm -f ./$(DEPDIR)/b-pkg-hash.Po
+	-rm -f ./$(DEPDIR)/c-tarextract.Po
+	-rm -f ./$(DEPDIR)/c-treewalk.Po
+	-rm -f ./$(DEPDIR)/c-trigdeferred.Po
+	-rm -f ./$(DEPDIR)/t-ar.Po
+	-rm -f ./$(DEPDIR)/t-arch.Po
+	-rm -f ./$(DEPDIR)/t-buffer.Po
+	-rm -f ./$(DEPDIR)/t-c-ctype.Po
+	-rm -f ./$(DEPDIR)/t-command.Po
+	-rm -f ./$(DEPDIR)/t-deb-version.Po
+	-rm -f ./$(DEPDIR)/t-ehandle.Po
+	-rm -f ./$(DEPDIR)/t-error.Po
+	-rm -f ./$(DEPDIR)/t-file.Po
+	-rm -f ./$(DEPDIR)/t-fsys-dir.Po
+	-rm -f ./$(DEPDIR)/t-fsys-hash.Po
+	-rm -f ./$(DEPDIR)/t-headers-cpp.Po
+	-rm -f ./$(DEPDIR)/t-macros.Po
+	-rm -f ./$(DEPDIR)/t-mod-db.Po
+	-rm -f ./$(DEPDIR)/t-namevalue.Po
+	-rm -f ./$(DEPDIR)/t-pager.Po
+	-rm -f ./$(DEPDIR)/t-path.Po
+	-rm -f ./$(DEPDIR)/t-pkg-hash.Po
+	-rm -f ./$(DEPDIR)/t-pkg-list.Po
+	-rm -f ./$(DEPDIR)/t-pkg-queue.Po
+	-rm -f ./$(DEPDIR)/t-pkg-show.Po
+	-rm -f ./$(DEPDIR)/t-pkginfo.Po
+	-rm -f ./$(DEPDIR)/t-progname.Po
+	-rm -f ./$(DEPDIR)/t-string.Po
+	-rm -f ./$(DEPDIR)/t-subproc.Po
+	-rm -f ./$(DEPDIR)/t-tar.Po
+	-rm -f ./$(DEPDIR)/t-test-skip.Po
+	-rm -f ./$(DEPDIR)/t-test.Po
+	-rm -f ./$(DEPDIR)/t-trigger.Po
+	-rm -f ./$(DEPDIR)/t-varbuf.Po
+	-rm -f ./$(DEPDIR)/t-version.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/b-fsys-hash.Po
+	-rm -f ./$(DEPDIR)/b-pkg-hash.Po
+	-rm -f ./$(DEPDIR)/c-tarextract.Po
+	-rm -f ./$(DEPDIR)/c-treewalk.Po
+	-rm -f ./$(DEPDIR)/c-trigdeferred.Po
+	-rm -f ./$(DEPDIR)/t-ar.Po
+	-rm -f ./$(DEPDIR)/t-arch.Po
+	-rm -f ./$(DEPDIR)/t-buffer.Po
+	-rm -f ./$(DEPDIR)/t-c-ctype.Po
+	-rm -f ./$(DEPDIR)/t-command.Po
+	-rm -f ./$(DEPDIR)/t-deb-version.Po
+	-rm -f ./$(DEPDIR)/t-ehandle.Po
+	-rm -f ./$(DEPDIR)/t-error.Po
+	-rm -f ./$(DEPDIR)/t-file.Po
+	-rm -f ./$(DEPDIR)/t-fsys-dir.Po
+	-rm -f ./$(DEPDIR)/t-fsys-hash.Po
+	-rm -f ./$(DEPDIR)/t-headers-cpp.Po
+	-rm -f ./$(DEPDIR)/t-macros.Po
+	-rm -f ./$(DEPDIR)/t-mod-db.Po
+	-rm -f ./$(DEPDIR)/t-namevalue.Po
+	-rm -f ./$(DEPDIR)/t-pager.Po
+	-rm -f ./$(DEPDIR)/t-path.Po
+	-rm -f ./$(DEPDIR)/t-pkg-hash.Po
+	-rm -f ./$(DEPDIR)/t-pkg-list.Po
+	-rm -f ./$(DEPDIR)/t-pkg-queue.Po
+	-rm -f ./$(DEPDIR)/t-pkg-show.Po
+	-rm -f ./$(DEPDIR)/t-pkginfo.Po
+	-rm -f ./$(DEPDIR)/t-progname.Po
+	-rm -f ./$(DEPDIR)/t-string.Po
+	-rm -f ./$(DEPDIR)/t-subproc.Po
+	-rm -f ./$(DEPDIR)/t-tar.Po
+	-rm -f ./$(DEPDIR)/t-test-skip.Po
+	-rm -f ./$(DEPDIR)/t-test.Po
+	-rm -f ./$(DEPDIR)/t-trigger.Po
+	-rm -f ./$(DEPDIR)/t-varbuf.Po
+	-rm -f ./$(DEPDIR)/t-version.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am \
+	check-local clean clean-checkPROGRAMS clean-generic \
+	clean-libtool clean-local cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+TEST_VERBOSE ?= 0
+TEST_PARALLEL ?= 1
+
+check-clean:
+	[ -z "$(test_tmpdir)" ] || rm -fr $(test_tmpdir)
+
+check-local: $(test_data) $(test_programs) $(test_scripts)
+	[ -z "$(test_tmpdir)" ] || $(MKDIR_P) $(test_tmpdir)
+	PATH="$(abs_top_builddir)/src:$(abs_top_builddir)/scripts:$(abs_top_builddir)/utils:$(PATH)" \
+	  LC_ALL=C \
+	  DPKG_COLORS=never \
+	  $(TEST_ENV_VARS) \
+	  srcdir=$(srcdir) builddir=$(builddir) \
+	  CC=$(CC) \
+	  PERL=$(PERL) \
+	  SHELL=$(SHELL) \
+	  PERL_DL_NONLAZY=1 \
+	  PERL5LIB=$(abs_top_srcdir)/scripts:$(abs_top_srcdir)/dselect/methods \
+	  PERL5OPT=$(TEST_COVERAGE) \
+	  $(PERL) -MTAP::Harness -e $(TEST_RUNNER) \
+	    $(addprefix $(builddir)/,$(test_programs)) \
+	    $(addprefix $(srcdir)/,$(test_scripts))
+
+clean-local: check-clean
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/lib/dpkg/t/Makefile.in dpkg-1.20.7.1/lib/dpkg/t/Makefile.in
--- dpkg-1.20.7.1-orig/lib/dpkg/t/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/dpkg/t/Makefile.in	2021-06-09 18:23:00.873296366 -0500
@@ -0,0 +1,1290 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Variables to be defined:
+#
+#  TEST_VERBOSE - set to 0 (default) or 1 to control test suite verbosity
+#  TEST_PARALLEL - set to 1 (default) or N to control the parallel jobs
+#  TEST_ENV_VARS - environment variables to be set for the test suite
+#  TEST_COVERAGE - set to the perl module in charge of getting test coverage
+#  test_tmpdir - test suite temporary directory
+#  test_scripts - list of test case scripts
+#  test_programs - list of test case programs
+#  test_data - list of test data files
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+check_PROGRAMS = $(am__EXEEXT_1) b-fsys-hash$(EXEEXT) \
+	b-pkg-hash$(EXEEXT) c-tarextract$(EXEEXT) c-treewalk$(EXEEXT) \
+	c-trigdeferred$(EXEEXT)
+subdir = lib/dpkg/t
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__EXEEXT_1 = t-test$(EXEEXT) t-test-skip$(EXEEXT) t-macros$(EXEEXT) \
+	t-headers-cpp$(EXEEXT) t-c-ctype$(EXEEXT) t-namevalue$(EXEEXT) \
+	t-ehandle$(EXEEXT) t-error$(EXEEXT) t-string$(EXEEXT) \
+	t-file$(EXEEXT) t-buffer$(EXEEXT) t-path$(EXEEXT) \
+	t-progname$(EXEEXT) t-subproc$(EXEEXT) t-command$(EXEEXT) \
+	t-pager$(EXEEXT) t-varbuf$(EXEEXT) t-ar$(EXEEXT) \
+	t-tar$(EXEEXT) t-deb-version$(EXEEXT) t-arch$(EXEEXT) \
+	t-version$(EXEEXT) t-pkginfo$(EXEEXT) t-pkg-list$(EXEEXT) \
+	t-pkg-queue$(EXEEXT) t-pkg-hash$(EXEEXT) t-pkg-show$(EXEEXT) \
+	t-fsys-dir$(EXEEXT) t-fsys-hash$(EXEEXT) t-trigger$(EXEEXT) \
+	t-mod-db$(EXEEXT)
+b_fsys_hash_SOURCES = b-fsys-hash.c
+b_fsys_hash_OBJECTS = b-fsys-hash.$(OBJEXT)
+am__DEPENDENCIES_1 =
+am__DEPENDENCIES_2 = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+am__DEPENDENCIES_3 = $(am__DEPENDENCIES_2)
+b_fsys_hash_DEPENDENCIES = $(am__DEPENDENCIES_3)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+b_pkg_hash_SOURCES = b-pkg-hash.c
+b_pkg_hash_OBJECTS = b-pkg-hash.$(OBJEXT)
+b_pkg_hash_DEPENDENCIES = $(am__DEPENDENCIES_3)
+c_tarextract_SOURCES = c-tarextract.c
+c_tarextract_OBJECTS = c-tarextract.$(OBJEXT)
+c_tarextract_LDADD = $(LDADD)
+c_tarextract_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+c_treewalk_SOURCES = c-treewalk.c
+c_treewalk_OBJECTS = c-treewalk.$(OBJEXT)
+c_treewalk_LDADD = $(LDADD)
+c_treewalk_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+c_trigdeferred_SOURCES = c-trigdeferred.c
+c_trigdeferred_OBJECTS = c-trigdeferred.$(OBJEXT)
+c_trigdeferred_LDADD = $(LDADD)
+c_trigdeferred_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_ar_SOURCES = t-ar.c
+t_ar_OBJECTS = t-ar.$(OBJEXT)
+t_ar_LDADD = $(LDADD)
+t_ar_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_arch_SOURCES = t-arch.c
+t_arch_OBJECTS = t-arch.$(OBJEXT)
+t_arch_LDADD = $(LDADD)
+t_arch_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_buffer_SOURCES = t-buffer.c
+t_buffer_OBJECTS = t-buffer.$(OBJEXT)
+t_buffer_LDADD = $(LDADD)
+t_buffer_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_c_ctype_SOURCES = t-c-ctype.c
+t_c_ctype_OBJECTS = t-c-ctype.$(OBJEXT)
+t_c_ctype_LDADD = $(LDADD)
+t_c_ctype_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_command_SOURCES = t-command.c
+t_command_OBJECTS = t-command.$(OBJEXT)
+t_command_LDADD = $(LDADD)
+t_command_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_deb_version_SOURCES = t-deb-version.c
+t_deb_version_OBJECTS = t-deb-version.$(OBJEXT)
+t_deb_version_LDADD = $(LDADD)
+t_deb_version_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_ehandle_SOURCES = t-ehandle.c
+t_ehandle_OBJECTS = t-ehandle.$(OBJEXT)
+t_ehandle_LDADD = $(LDADD)
+t_ehandle_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_error_SOURCES = t-error.c
+t_error_OBJECTS = t-error.$(OBJEXT)
+t_error_LDADD = $(LDADD)
+t_error_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_file_SOURCES = t-file.c
+t_file_OBJECTS = t-file.$(OBJEXT)
+t_file_LDADD = $(LDADD)
+t_file_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_fsys_dir_SOURCES = t-fsys-dir.c
+t_fsys_dir_OBJECTS = t-fsys-dir.$(OBJEXT)
+t_fsys_dir_LDADD = $(LDADD)
+t_fsys_dir_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_fsys_hash_SOURCES = t-fsys-hash.c
+t_fsys_hash_OBJECTS = t-fsys-hash.$(OBJEXT)
+t_fsys_hash_LDADD = $(LDADD)
+t_fsys_hash_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+am_t_headers_cpp_OBJECTS = t-headers-cpp.$(OBJEXT)
+t_headers_cpp_OBJECTS = $(am_t_headers_cpp_OBJECTS)
+t_headers_cpp_LDADD = $(LDADD)
+t_headers_cpp_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_macros_SOURCES = t-macros.c
+t_macros_OBJECTS = t-macros.$(OBJEXT)
+t_macros_LDADD = $(LDADD)
+t_macros_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_mod_db_SOURCES = t-mod-db.c
+t_mod_db_OBJECTS = t-mod-db.$(OBJEXT)
+t_mod_db_LDADD = $(LDADD)
+t_mod_db_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_namevalue_SOURCES = t-namevalue.c
+t_namevalue_OBJECTS = t-namevalue.$(OBJEXT)
+t_namevalue_LDADD = $(LDADD)
+t_namevalue_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pager_SOURCES = t-pager.c
+t_pager_OBJECTS = t-pager.$(OBJEXT)
+t_pager_LDADD = $(LDADD)
+t_pager_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_path_SOURCES = t-path.c
+t_path_OBJECTS = t-path.$(OBJEXT)
+t_path_LDADD = $(LDADD)
+t_path_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pkg_hash_SOURCES = t-pkg-hash.c
+t_pkg_hash_OBJECTS = t-pkg-hash.$(OBJEXT)
+t_pkg_hash_LDADD = $(LDADD)
+t_pkg_hash_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pkg_list_SOURCES = t-pkg-list.c
+t_pkg_list_OBJECTS = t-pkg-list.$(OBJEXT)
+t_pkg_list_LDADD = $(LDADD)
+t_pkg_list_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pkg_queue_SOURCES = t-pkg-queue.c
+t_pkg_queue_OBJECTS = t-pkg-queue.$(OBJEXT)
+t_pkg_queue_LDADD = $(LDADD)
+t_pkg_queue_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pkg_show_SOURCES = t-pkg-show.c
+t_pkg_show_OBJECTS = t-pkg-show.$(OBJEXT)
+t_pkg_show_LDADD = $(LDADD)
+t_pkg_show_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_pkginfo_SOURCES = t-pkginfo.c
+t_pkginfo_OBJECTS = t-pkginfo.$(OBJEXT)
+t_pkginfo_LDADD = $(LDADD)
+t_pkginfo_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_progname_SOURCES = t-progname.c
+t_progname_OBJECTS = t-progname.$(OBJEXT)
+t_progname_LDADD = $(LDADD)
+t_progname_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_string_SOURCES = t-string.c
+t_string_OBJECTS = t-string.$(OBJEXT)
+t_string_LDADD = $(LDADD)
+t_string_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_subproc_SOURCES = t-subproc.c
+t_subproc_OBJECTS = t-subproc.$(OBJEXT)
+t_subproc_LDADD = $(LDADD)
+t_subproc_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_tar_SOURCES = t-tar.c
+t_tar_OBJECTS = t-tar.$(OBJEXT)
+t_tar_LDADD = $(LDADD)
+t_tar_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_test_SOURCES = t-test.c
+t_test_OBJECTS = t-test.$(OBJEXT)
+t_test_LDADD = $(LDADD)
+t_test_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_test_skip_SOURCES = t-test-skip.c
+t_test_skip_OBJECTS = t-test-skip.$(OBJEXT)
+t_test_skip_LDADD = $(LDADD)
+t_test_skip_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_trigger_SOURCES = t-trigger.c
+t_trigger_OBJECTS = t-trigger.$(OBJEXT)
+t_trigger_LDADD = $(LDADD)
+t_trigger_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_varbuf_SOURCES = t-varbuf.c
+t_varbuf_OBJECTS = t-varbuf.$(OBJEXT)
+t_varbuf_LDADD = $(LDADD)
+t_varbuf_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+t_version_SOURCES = t-version.c
+t_version_OBJECTS = t-version.$(OBJEXT)
+t_version_LDADD = $(LDADD)
+t_version_DEPENDENCIES = $(top_builddir)/lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/b-fsys-hash.Po \
+	./$(DEPDIR)/b-pkg-hash.Po ./$(DEPDIR)/c-tarextract.Po \
+	./$(DEPDIR)/c-treewalk.Po ./$(DEPDIR)/c-trigdeferred.Po \
+	./$(DEPDIR)/t-ar.Po ./$(DEPDIR)/t-arch.Po \
+	./$(DEPDIR)/t-buffer.Po ./$(DEPDIR)/t-c-ctype.Po \
+	./$(DEPDIR)/t-command.Po ./$(DEPDIR)/t-deb-version.Po \
+	./$(DEPDIR)/t-ehandle.Po ./$(DEPDIR)/t-error.Po \
+	./$(DEPDIR)/t-file.Po ./$(DEPDIR)/t-fsys-dir.Po \
+	./$(DEPDIR)/t-fsys-hash.Po ./$(DEPDIR)/t-headers-cpp.Po \
+	./$(DEPDIR)/t-macros.Po ./$(DEPDIR)/t-mod-db.Po \
+	./$(DEPDIR)/t-namevalue.Po ./$(DEPDIR)/t-pager.Po \
+	./$(DEPDIR)/t-path.Po ./$(DEPDIR)/t-pkg-hash.Po \
+	./$(DEPDIR)/t-pkg-list.Po ./$(DEPDIR)/t-pkg-queue.Po \
+	./$(DEPDIR)/t-pkg-show.Po ./$(DEPDIR)/t-pkginfo.Po \
+	./$(DEPDIR)/t-progname.Po ./$(DEPDIR)/t-string.Po \
+	./$(DEPDIR)/t-subproc.Po ./$(DEPDIR)/t-tar.Po \
+	./$(DEPDIR)/t-test-skip.Po ./$(DEPDIR)/t-test.Po \
+	./$(DEPDIR)/t-trigger.Po ./$(DEPDIR)/t-varbuf.Po \
+	./$(DEPDIR)/t-version.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CXX) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CXXFLAGS) $(CXXFLAGS)
+AM_V_CXX = $(am__v_CXX_@AM_V@)
+am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
+am__v_CXX_0 = @echo "  CXX     " $@;
+am__v_CXX_1 = 
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) $(AM_V_lt) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+	$(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
+am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
+am__v_CXXLD_0 = @echo "  CXXLD   " $@;
+am__v_CXXLD_1 = 
+SOURCES = b-fsys-hash.c b-pkg-hash.c c-tarextract.c c-treewalk.c \
+	c-trigdeferred.c t-ar.c t-arch.c t-buffer.c t-c-ctype.c \
+	t-command.c t-deb-version.c t-ehandle.c t-error.c t-file.c \
+	t-fsys-dir.c t-fsys-hash.c $(t_headers_cpp_SOURCES) t-macros.c \
+	t-mod-db.c t-namevalue.c t-pager.c t-path.c t-pkg-hash.c \
+	t-pkg-list.c t-pkg-queue.c t-pkg-show.c t-pkginfo.c \
+	t-progname.c t-string.c t-subproc.c t-tar.c t-test.c \
+	t-test-skip.c t-trigger.c t-varbuf.c t-version.c
+DIST_SOURCES = b-fsys-hash.c b-pkg-hash.c c-tarextract.c c-treewalk.c \
+	c-trigdeferred.c t-ar.c t-arch.c t-buffer.c t-c-ctype.c \
+	t-command.c t-deb-version.c t-ehandle.c t-error.c t-file.c \
+	t-fsys-dir.c t-fsys-hash.c $(t_headers_cpp_SOURCES) t-macros.c \
+	t-mod-db.c t-namevalue.c t-pager.c t-path.c t-pkg-hash.c \
+	t-pkg-list.c t-pkg-queue.c t-pkg-show.c t-pkginfo.c \
+	t-progname.c t-string.c t-subproc.c t-tar.c t-test.c \
+	t-test-skip.c t-trigger.c t-varbuf.c t-version.c
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp $(top_srcdir)/check.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CPPFLAGS = \
+	-DADMINDIR=\"$(admindir)\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+LDADD = \
+	$(top_builddir)/lib/dpkg/libdpkg.la \
+	$(LIBINTL)
+
+EXTRA_DIST = \
+	$(test_scripts) \
+	$(nil)
+
+TEST_ENV_VARS = \
+	DPKG_PROGTAR=$(TAR) \
+	$(nil)
+
+t_headers_cpp_SOURCES = t-headers-cpp.cc
+
+# The tests are sorted in order of increasing complexity.
+test_programs = \
+	t-test \
+	t-test-skip \
+	t-macros \
+	t-headers-cpp \
+	t-c-ctype \
+	t-namevalue \
+	t-ehandle \
+	t-error \
+	t-string \
+	t-file \
+	t-buffer \
+	t-path \
+	t-progname \
+	t-subproc \
+	t-command \
+	t-pager \
+	t-varbuf \
+	t-ar \
+	t-tar \
+	t-deb-version \
+	t-arch \
+	t-version \
+	t-pkginfo \
+	t-pkg-list \
+	t-pkg-queue \
+	t-pkg-hash \
+	t-pkg-show \
+	t-fsys-dir \
+	t-fsys-hash \
+	t-trigger \
+	t-mod-db \
+	$(nil)
+
+test_scripts = \
+	t-tarextract.t \
+	t-treewalk.t \
+	t-trigdeferred.t \
+	$(nil)
+
+BENCHMARK_LDADD_FLAGS = -lrt $(LDADD)
+b_fsys_hash_LDADD = $(BENCHMARK_LDADD_FLAGS)
+b_pkg_hash_LDADD = $(BENCHMARK_LDADD_FLAGS)
+test_tmpdir = t.tmp
+TEST_RUNNER = '\
+	my $$harness = TAP::Harness->new({ \
+	    exec => sub { my (undef, $$test) = @_; \
+	        return [ $$test ] if $$test !~ "\.t\$$" and -x $$test; \
+	        return }, \
+	    lib => [ "$(top_srcdir)/scripts", "$(top_srcdir)/dselect/methods"  ], \
+	    color => 1, \
+	    verbosity => $(TEST_VERBOSE), \
+	    jobs => $(TEST_PARALLEL), \
+	    failures => 1, \
+	}); \
+	my $$aggregate = $$harness->runtests(@ARGV); \
+	die "FAIL: test suite has errors\n" if $$aggregate->has_errors;'
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .cc .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/check.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/dpkg/t/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign lib/dpkg/t/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+$(top_srcdir)/check.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+clean-checkPROGRAMS:
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+b-fsys-hash$(EXEEXT): $(b_fsys_hash_OBJECTS) $(b_fsys_hash_DEPENDENCIES) $(EXTRA_b_fsys_hash_DEPENDENCIES) 
+	@rm -f b-fsys-hash$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(b_fsys_hash_OBJECTS) $(b_fsys_hash_LDADD) $(LIBS)
+
+b-pkg-hash$(EXEEXT): $(b_pkg_hash_OBJECTS) $(b_pkg_hash_DEPENDENCIES) $(EXTRA_b_pkg_hash_DEPENDENCIES) 
+	@rm -f b-pkg-hash$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(b_pkg_hash_OBJECTS) $(b_pkg_hash_LDADD) $(LIBS)
+
+c-tarextract$(EXEEXT): $(c_tarextract_OBJECTS) $(c_tarextract_DEPENDENCIES) $(EXTRA_c_tarextract_DEPENDENCIES) 
+	@rm -f c-tarextract$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(c_tarextract_OBJECTS) $(c_tarextract_LDADD) $(LIBS)
+
+c-treewalk$(EXEEXT): $(c_treewalk_OBJECTS) $(c_treewalk_DEPENDENCIES) $(EXTRA_c_treewalk_DEPENDENCIES) 
+	@rm -f c-treewalk$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(c_treewalk_OBJECTS) $(c_treewalk_LDADD) $(LIBS)
+
+c-trigdeferred$(EXEEXT): $(c_trigdeferred_OBJECTS) $(c_trigdeferred_DEPENDENCIES) $(EXTRA_c_trigdeferred_DEPENDENCIES) 
+	@rm -f c-trigdeferred$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(c_trigdeferred_OBJECTS) $(c_trigdeferred_LDADD) $(LIBS)
+
+t-ar$(EXEEXT): $(t_ar_OBJECTS) $(t_ar_DEPENDENCIES) $(EXTRA_t_ar_DEPENDENCIES) 
+	@rm -f t-ar$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_ar_OBJECTS) $(t_ar_LDADD) $(LIBS)
+
+t-arch$(EXEEXT): $(t_arch_OBJECTS) $(t_arch_DEPENDENCIES) $(EXTRA_t_arch_DEPENDENCIES) 
+	@rm -f t-arch$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_arch_OBJECTS) $(t_arch_LDADD) $(LIBS)
+
+t-buffer$(EXEEXT): $(t_buffer_OBJECTS) $(t_buffer_DEPENDENCIES) $(EXTRA_t_buffer_DEPENDENCIES) 
+	@rm -f t-buffer$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_buffer_OBJECTS) $(t_buffer_LDADD) $(LIBS)
+
+t-c-ctype$(EXEEXT): $(t_c_ctype_OBJECTS) $(t_c_ctype_DEPENDENCIES) $(EXTRA_t_c_ctype_DEPENDENCIES) 
+	@rm -f t-c-ctype$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_c_ctype_OBJECTS) $(t_c_ctype_LDADD) $(LIBS)
+
+t-command$(EXEEXT): $(t_command_OBJECTS) $(t_command_DEPENDENCIES) $(EXTRA_t_command_DEPENDENCIES) 
+	@rm -f t-command$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_command_OBJECTS) $(t_command_LDADD) $(LIBS)
+
+t-deb-version$(EXEEXT): $(t_deb_version_OBJECTS) $(t_deb_version_DEPENDENCIES) $(EXTRA_t_deb_version_DEPENDENCIES) 
+	@rm -f t-deb-version$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_deb_version_OBJECTS) $(t_deb_version_LDADD) $(LIBS)
+
+t-ehandle$(EXEEXT): $(t_ehandle_OBJECTS) $(t_ehandle_DEPENDENCIES) $(EXTRA_t_ehandle_DEPENDENCIES) 
+	@rm -f t-ehandle$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_ehandle_OBJECTS) $(t_ehandle_LDADD) $(LIBS)
+
+t-error$(EXEEXT): $(t_error_OBJECTS) $(t_error_DEPENDENCIES) $(EXTRA_t_error_DEPENDENCIES) 
+	@rm -f t-error$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_error_OBJECTS) $(t_error_LDADD) $(LIBS)
+
+t-file$(EXEEXT): $(t_file_OBJECTS) $(t_file_DEPENDENCIES) $(EXTRA_t_file_DEPENDENCIES) 
+	@rm -f t-file$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_file_OBJECTS) $(t_file_LDADD) $(LIBS)
+
+t-fsys-dir$(EXEEXT): $(t_fsys_dir_OBJECTS) $(t_fsys_dir_DEPENDENCIES) $(EXTRA_t_fsys_dir_DEPENDENCIES) 
+	@rm -f t-fsys-dir$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_fsys_dir_OBJECTS) $(t_fsys_dir_LDADD) $(LIBS)
+
+t-fsys-hash$(EXEEXT): $(t_fsys_hash_OBJECTS) $(t_fsys_hash_DEPENDENCIES) $(EXTRA_t_fsys_hash_DEPENDENCIES) 
+	@rm -f t-fsys-hash$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_fsys_hash_OBJECTS) $(t_fsys_hash_LDADD) $(LIBS)
+
+t-headers-cpp$(EXEEXT): $(t_headers_cpp_OBJECTS) $(t_headers_cpp_DEPENDENCIES) $(EXTRA_t_headers_cpp_DEPENDENCIES) 
+	@rm -f t-headers-cpp$(EXEEXT)
+	$(AM_V_CXXLD)$(CXXLINK) $(t_headers_cpp_OBJECTS) $(t_headers_cpp_LDADD) $(LIBS)
+
+t-macros$(EXEEXT): $(t_macros_OBJECTS) $(t_macros_DEPENDENCIES) $(EXTRA_t_macros_DEPENDENCIES) 
+	@rm -f t-macros$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_macros_OBJECTS) $(t_macros_LDADD) $(LIBS)
+
+t-mod-db$(EXEEXT): $(t_mod_db_OBJECTS) $(t_mod_db_DEPENDENCIES) $(EXTRA_t_mod_db_DEPENDENCIES) 
+	@rm -f t-mod-db$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_mod_db_OBJECTS) $(t_mod_db_LDADD) $(LIBS)
+
+t-namevalue$(EXEEXT): $(t_namevalue_OBJECTS) $(t_namevalue_DEPENDENCIES) $(EXTRA_t_namevalue_DEPENDENCIES) 
+	@rm -f t-namevalue$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_namevalue_OBJECTS) $(t_namevalue_LDADD) $(LIBS)
+
+t-pager$(EXEEXT): $(t_pager_OBJECTS) $(t_pager_DEPENDENCIES) $(EXTRA_t_pager_DEPENDENCIES) 
+	@rm -f t-pager$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pager_OBJECTS) $(t_pager_LDADD) $(LIBS)
+
+t-path$(EXEEXT): $(t_path_OBJECTS) $(t_path_DEPENDENCIES) $(EXTRA_t_path_DEPENDENCIES) 
+	@rm -f t-path$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_path_OBJECTS) $(t_path_LDADD) $(LIBS)
+
+t-pkg-hash$(EXEEXT): $(t_pkg_hash_OBJECTS) $(t_pkg_hash_DEPENDENCIES) $(EXTRA_t_pkg_hash_DEPENDENCIES) 
+	@rm -f t-pkg-hash$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pkg_hash_OBJECTS) $(t_pkg_hash_LDADD) $(LIBS)
+
+t-pkg-list$(EXEEXT): $(t_pkg_list_OBJECTS) $(t_pkg_list_DEPENDENCIES) $(EXTRA_t_pkg_list_DEPENDENCIES) 
+	@rm -f t-pkg-list$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pkg_list_OBJECTS) $(t_pkg_list_LDADD) $(LIBS)
+
+t-pkg-queue$(EXEEXT): $(t_pkg_queue_OBJECTS) $(t_pkg_queue_DEPENDENCIES) $(EXTRA_t_pkg_queue_DEPENDENCIES) 
+	@rm -f t-pkg-queue$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pkg_queue_OBJECTS) $(t_pkg_queue_LDADD) $(LIBS)
+
+t-pkg-show$(EXEEXT): $(t_pkg_show_OBJECTS) $(t_pkg_show_DEPENDENCIES) $(EXTRA_t_pkg_show_DEPENDENCIES) 
+	@rm -f t-pkg-show$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pkg_show_OBJECTS) $(t_pkg_show_LDADD) $(LIBS)
+
+t-pkginfo$(EXEEXT): $(t_pkginfo_OBJECTS) $(t_pkginfo_DEPENDENCIES) $(EXTRA_t_pkginfo_DEPENDENCIES) 
+	@rm -f t-pkginfo$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_pkginfo_OBJECTS) $(t_pkginfo_LDADD) $(LIBS)
+
+t-progname$(EXEEXT): $(t_progname_OBJECTS) $(t_progname_DEPENDENCIES) $(EXTRA_t_progname_DEPENDENCIES) 
+	@rm -f t-progname$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_progname_OBJECTS) $(t_progname_LDADD) $(LIBS)
+
+t-string$(EXEEXT): $(t_string_OBJECTS) $(t_string_DEPENDENCIES) $(EXTRA_t_string_DEPENDENCIES) 
+	@rm -f t-string$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_string_OBJECTS) $(t_string_LDADD) $(LIBS)
+
+t-subproc$(EXEEXT): $(t_subproc_OBJECTS) $(t_subproc_DEPENDENCIES) $(EXTRA_t_subproc_DEPENDENCIES) 
+	@rm -f t-subproc$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_subproc_OBJECTS) $(t_subproc_LDADD) $(LIBS)
+
+t-tar$(EXEEXT): $(t_tar_OBJECTS) $(t_tar_DEPENDENCIES) $(EXTRA_t_tar_DEPENDENCIES) 
+	@rm -f t-tar$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_tar_OBJECTS) $(t_tar_LDADD) $(LIBS)
+
+t-test$(EXEEXT): $(t_test_OBJECTS) $(t_test_DEPENDENCIES) $(EXTRA_t_test_DEPENDENCIES) 
+	@rm -f t-test$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_test_OBJECTS) $(t_test_LDADD) $(LIBS)
+
+t-test-skip$(EXEEXT): $(t_test_skip_OBJECTS) $(t_test_skip_DEPENDENCIES) $(EXTRA_t_test_skip_DEPENDENCIES) 
+	@rm -f t-test-skip$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_test_skip_OBJECTS) $(t_test_skip_LDADD) $(LIBS)
+
+t-trigger$(EXEEXT): $(t_trigger_OBJECTS) $(t_trigger_DEPENDENCIES) $(EXTRA_t_trigger_DEPENDENCIES) 
+	@rm -f t-trigger$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_trigger_OBJECTS) $(t_trigger_LDADD) $(LIBS)
+
+t-varbuf$(EXEEXT): $(t_varbuf_OBJECTS) $(t_varbuf_DEPENDENCIES) $(EXTRA_t_varbuf_DEPENDENCIES) 
+	@rm -f t-varbuf$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_varbuf_OBJECTS) $(t_varbuf_LDADD) $(LIBS)
+
+t-version$(EXEEXT): $(t_version_OBJECTS) $(t_version_DEPENDENCIES) $(EXTRA_t_version_DEPENDENCIES) 
+	@rm -f t-version$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(t_version_OBJECTS) $(t_version_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/b-fsys-hash.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/b-pkg-hash.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/c-tarextract.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/c-treewalk.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/c-trigdeferred.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-ar.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-arch.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-buffer.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-c-ctype.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-command.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-deb-version.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-ehandle.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-error.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-file.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-fsys-dir.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-fsys-hash.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-headers-cpp.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-macros.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-mod-db.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-namevalue.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-pager.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-path.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-pkg-hash.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-pkg-list.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-pkg-queue.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-pkg-show.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-pkginfo.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-progname.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-string.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-subproc.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-tar.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-test-skip.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-test.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-trigger.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-varbuf.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-version.Po@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+.cc.o:
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
+
+.cc.obj:
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.cc.lo:
+@am__fastdepCXX_TRUE@	$(AM_V_CXX)$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(LTCXXCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-checkPROGRAMS clean-generic clean-libtool clean-local \
+	mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/b-fsys-hash.Po
+	-rm -f ./$(DEPDIR)/b-pkg-hash.Po
+	-rm -f ./$(DEPDIR)/c-tarextract.Po
+	-rm -f ./$(DEPDIR)/c-treewalk.Po
+	-rm -f ./$(DEPDIR)/c-trigdeferred.Po
+	-rm -f ./$(DEPDIR)/t-ar.Po
+	-rm -f ./$(DEPDIR)/t-arch.Po
+	-rm -f ./$(DEPDIR)/t-buffer.Po
+	-rm -f ./$(DEPDIR)/t-c-ctype.Po
+	-rm -f ./$(DEPDIR)/t-command.Po
+	-rm -f ./$(DEPDIR)/t-deb-version.Po
+	-rm -f ./$(DEPDIR)/t-ehandle.Po
+	-rm -f ./$(DEPDIR)/t-error.Po
+	-rm -f ./$(DEPDIR)/t-file.Po
+	-rm -f ./$(DEPDIR)/t-fsys-dir.Po
+	-rm -f ./$(DEPDIR)/t-fsys-hash.Po
+	-rm -f ./$(DEPDIR)/t-headers-cpp.Po
+	-rm -f ./$(DEPDIR)/t-macros.Po
+	-rm -f ./$(DEPDIR)/t-mod-db.Po
+	-rm -f ./$(DEPDIR)/t-namevalue.Po
+	-rm -f ./$(DEPDIR)/t-pager.Po
+	-rm -f ./$(DEPDIR)/t-path.Po
+	-rm -f ./$(DEPDIR)/t-pkg-hash.Po
+	-rm -f ./$(DEPDIR)/t-pkg-list.Po
+	-rm -f ./$(DEPDIR)/t-pkg-queue.Po
+	-rm -f ./$(DEPDIR)/t-pkg-show.Po
+	-rm -f ./$(DEPDIR)/t-pkginfo.Po
+	-rm -f ./$(DEPDIR)/t-progname.Po
+	-rm -f ./$(DEPDIR)/t-string.Po
+	-rm -f ./$(DEPDIR)/t-subproc.Po
+	-rm -f ./$(DEPDIR)/t-tar.Po
+	-rm -f ./$(DEPDIR)/t-test-skip.Po
+	-rm -f ./$(DEPDIR)/t-test.Po
+	-rm -f ./$(DEPDIR)/t-trigger.Po
+	-rm -f ./$(DEPDIR)/t-varbuf.Po
+	-rm -f ./$(DEPDIR)/t-version.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/b-fsys-hash.Po
+	-rm -f ./$(DEPDIR)/b-pkg-hash.Po
+	-rm -f ./$(DEPDIR)/c-tarextract.Po
+	-rm -f ./$(DEPDIR)/c-treewalk.Po
+	-rm -f ./$(DEPDIR)/c-trigdeferred.Po
+	-rm -f ./$(DEPDIR)/t-ar.Po
+	-rm -f ./$(DEPDIR)/t-arch.Po
+	-rm -f ./$(DEPDIR)/t-buffer.Po
+	-rm -f ./$(DEPDIR)/t-c-ctype.Po
+	-rm -f ./$(DEPDIR)/t-command.Po
+	-rm -f ./$(DEPDIR)/t-deb-version.Po
+	-rm -f ./$(DEPDIR)/t-ehandle.Po
+	-rm -f ./$(DEPDIR)/t-error.Po
+	-rm -f ./$(DEPDIR)/t-file.Po
+	-rm -f ./$(DEPDIR)/t-fsys-dir.Po
+	-rm -f ./$(DEPDIR)/t-fsys-hash.Po
+	-rm -f ./$(DEPDIR)/t-headers-cpp.Po
+	-rm -f ./$(DEPDIR)/t-macros.Po
+	-rm -f ./$(DEPDIR)/t-mod-db.Po
+	-rm -f ./$(DEPDIR)/t-namevalue.Po
+	-rm -f ./$(DEPDIR)/t-pager.Po
+	-rm -f ./$(DEPDIR)/t-path.Po
+	-rm -f ./$(DEPDIR)/t-pkg-hash.Po
+	-rm -f ./$(DEPDIR)/t-pkg-list.Po
+	-rm -f ./$(DEPDIR)/t-pkg-queue.Po
+	-rm -f ./$(DEPDIR)/t-pkg-show.Po
+	-rm -f ./$(DEPDIR)/t-pkginfo.Po
+	-rm -f ./$(DEPDIR)/t-progname.Po
+	-rm -f ./$(DEPDIR)/t-string.Po
+	-rm -f ./$(DEPDIR)/t-subproc.Po
+	-rm -f ./$(DEPDIR)/t-tar.Po
+	-rm -f ./$(DEPDIR)/t-test-skip.Po
+	-rm -f ./$(DEPDIR)/t-test.Po
+	-rm -f ./$(DEPDIR)/t-trigger.Po
+	-rm -f ./$(DEPDIR)/t-varbuf.Po
+	-rm -f ./$(DEPDIR)/t-version.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am \
+	check-local clean clean-checkPROGRAMS clean-generic \
+	clean-libtool clean-local cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+TEST_VERBOSE ?= 0
+TEST_PARALLEL ?= 1
+
+check-clean:
+	[ -z "$(test_tmpdir)" ] || rm -fr $(test_tmpdir)
+
+check-local: $(test_data) $(test_programs) $(test_scripts)
+	[ -z "$(test_tmpdir)" ] || $(MKDIR_P) $(test_tmpdir)
+	PATH="$(abs_top_builddir)/src:$(abs_top_builddir)/scripts:$(abs_top_builddir)/utils:$(PATH)" \
+	  LC_ALL=C \
+	  DPKG_COLORS=never \
+	  $(TEST_ENV_VARS) \
+	  srcdir=$(srcdir) builddir=$(builddir) \
+	  CC=$(CC) \
+	  PERL=$(PERL) \
+	  SHELL=$(SHELL) \
+	  PERL_DL_NONLAZY=1 \
+	  PERL5LIB=$(abs_top_srcdir)/scripts:$(abs_top_srcdir)/dselect/methods \
+	  PERL5OPT=$(TEST_COVERAGE) \
+	  $(PERL) -MTAP::Harness -e $(TEST_RUNNER) \
+	    $(addprefix $(builddir)/,$(test_programs)) \
+	    $(addprefix $(srcdir)/,$(test_scripts))
+
+clean-local: check-clean
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/lib/Makefile dpkg-1.20.7.1/lib/Makefile
--- dpkg-1.20.7.1-orig/lib/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/Makefile	2021-06-09 18:24:51.889468221 -0500
@@ -0,0 +1,697 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# lib/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+subdir = lib
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir distdir-am
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/lib
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/lib
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+SUBDIRS = \
+	compat \
+	dpkg
+
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign lib/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am clean clean-generic clean-libtool cscopelist-am ctags \
+	ctags-am distclean distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/lib/Makefile.in dpkg-1.20.7.1/lib/Makefile.in
--- dpkg-1.20.7.1-orig/lib/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/lib/Makefile.in	2021-06-09 18:23:00.726296135 -0500
@@ -0,0 +1,697 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = lib
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir distdir-am
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = \
+	compat \
+	dpkg
+
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign lib/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am clean clean-generic clean-libtool cscopelist-am ctags \
+	ctags-am distclean distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/libtool dpkg-1.20.7.1/libtool
--- dpkg-1.20.7.1-orig/libtool	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/libtool	2021-06-09 18:24:52.129468588 -0500
@@ -0,0 +1,11808 @@
+#! /bin/sh
+# Generated automatically by config.status (dpkg) 1.20.7.1
+# Libtool was configured on host lfsdt2:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags='CXX '
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: ${LT_SYS_LIBRARY_PATH=""}
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=2.4.6
+macro_revision=2.4.6
+
+# Whether or not to build shared libraries.
+build_libtool_libs=no
+
+# Whether or not to build static libraries.
+build_old_libs=yes
+
+# What type of objects to build.
+pic_mode=default
+
+# Whether or not to optimize for fast installation.
+fast_install=needless
+
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=
+
+# Shell to use when invoking shell scripts.
+SHELL="/bin/sh"
+
+# An echo program that protects backslashes.
+ECHO="printf %s\\n"
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=":"
+
+# The host system.
+host_alias=
+host=x86_64-pc-linux-gnu
+host_os=linux-gnu
+
+# The build system.
+build_alias=
+build=x86_64-pc-linux-gnu
+build_os=linux-gnu
+
+# A sed program that does not truncate output.
+SED="/bin/sed"
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP="/bin/grep"
+
+# An ERE matcher.
+EGREP="/bin/grep -E"
+
+# A literal string matcher.
+FGREP="/bin/grep -F"
+
+# A BSD- or MS-compatible name lister.
+NM="/usr/bin/nm -B"
+
+# Whether we need soft or hard links.
+LN_S="ln -s"
+
+# What is the maximum length of a command?
+max_cmd_len=1572864
+
+# Object file suffix (normally "o").
+objext=o
+
+# Executable file suffix (normally "").
+exeext=
+
+# whether the shell understands "unset".
+lt_unset=unset
+
+# turn spaces into newlines.
+SP2NL="tr \\040 \\012"
+
+# turn newlines into spaces.
+NL2SP="tr \\015\\012 \\040\\040"
+
+# convert $build file names to $host format.
+to_host_file_cmd=func_convert_file_noop
+
+# convert $build files to toolchain format.
+to_tool_file_cmd=func_convert_file_noop
+
+# An object symbol dumper.
+OBJDUMP="objdump"
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method="pass_all"
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd="\$MAGIC_CMD"
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=""
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob="no"
+
+# DLL creation program.
+DLLTOOL="false"
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd="printf %s\\n"
+
+# The archiver.
+AR="ar"
+
+# Flags to create an archive.
+AR_FLAGS="cru"
+
+# How to feed a file listing to the archiver.
+archiver_list_spec="@"
+
+# A symbol stripping program.
+STRIP="strip"
+
+# Commands used to install an old-style archive.
+RANLIB="ranlib"
+old_postinstall_cmds="chmod 644 \$oldlib~\$RANLIB \$tool_oldlib"
+old_postuninstall_cmds=""
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=no
+
+# A C compiler.
+LTCC="gcc"
+
+# LTCC compiler flags.
+LTCFLAGS=" -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2"
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe="sed -n -e 's/^.*[	 ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[	 ][	 ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p' | sed '/ __gnu_lto/d'"
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl="sed -n -e 's/^T .* \\(.*\\)\$/extern int \\1();/p' -e 's/^[ABCDGIRSTW][ABCDGIRSTW]* .* \\(.*\\)\$/extern char \\1;/p'"
+
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=""
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address="sed -n -e 's/^: \\(.*\\) .*\$/  {\"\\1\", (void *) 0},/p' -e 's/^[ABCDGIRSTW][ABCDGIRSTW]* .* \\(.*\\)\$/  {\"\\1\", (void *) \\&\\1},/p'"
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \\(.*\\) .*\$/  {\"\\1\", (void *) 0},/p' -e 's/^[ABCDGIRSTW][ABCDGIRSTW]* .* \\(lib.*\\)\$/  {\"\\1\", (void *) \\&\\1},/p' -e 's/^[ABCDGIRSTW][ABCDGIRSTW]* .* \\(.*\\)\$/  {\"lib\\1\", (void *) \\&\\1},/p'"
+
+# The name lister interface.
+nm_interface="BSD nm"
+
+# Specify filename containing input files for $NM.
+nm_file_list_spec="@"
+
+# The root where to search for dependent libraries,and where our libraries should be installed.
+lt_sysroot=
+
+# Command to truncate a binary pipe.
+lt_truncate_bin="/bin/dd bs=4096 count=1"
+
+# The name of the directory that contains temporary libtool files.
+objdir=.libs
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=file
+
+# Must we lock files when doing compilation?
+need_locks="no"
+
+# Manifest tool.
+MANIFEST_TOOL=":"
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=""
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=""
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=""
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=""
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=""
+
+# Old archive suffix (normally "a").
+libext=a
+
+# Shared library suffix (normally ".so").
+shrext_cmds=".so"
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=""
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=no
+
+# Do we need a version for libraries?
+need_version=no
+
+# Library versioning type.
+version_type=linux
+
+# Shared library runtime path variable.
+runpath_var=LD_RUN_PATH
+
+# Shared library path variable.
+shlibpath_var=LD_LIBRARY_PATH
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=no
+
+# Format of library name prefix.
+libname_spec="lib\$name"
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec="\$libname\$release\$shared_ext\$versuffix \$libname\$release\$shared_ext\$major \$libname\$shared_ext"
+
+# The coded name of the library, if different from the real name.
+soname_spec="\$libname\$release\$shared_ext\$major"
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=""
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=""
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=""
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=""
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=yes
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec="/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0 /usr/lib /lib "
+
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec="/lib /usr/lib /usr/local/lib /opt/lib /opt/rustc/lib "
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=""
+
+# Whether dlopen is supported.
+dlopen_support=unknown
+
+# Whether dlopen of programs is supported.
+dlopen_self=unknown
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=unknown
+
+# Commands to strip libraries.
+old_striplib="strip --strip-debug"
+striplib="strip --strip-unneeded"
+
+
+# The linker used to build libraries.
+LD="/usr/bin/ld -m elf_x86_64"
+
+# How to create reloadable object files.
+reload_flag=" -r"
+reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
+
+# Commands used to build an old-style archive.
+old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$tool_oldlib"
+
+# A language specific compiler.
+CC="gcc"
+
+# Is the compiler the GNU compiler?
+with_gcc=yes
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=" -fno-builtin"
+
+# Additional compiler flags for building library objects.
+pic_flag=" -fPIC -DPIC"
+
+# How to pass a linker flag through the compiler.
+wl="-Wl,"
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag="-static"
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o="yes"
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=yes
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=no
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec="\$wl--export-dynamic"
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec="\$wl--whole-archive\$convenience \$wl--no-whole-archive"
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object="no"
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=""
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=""
+
+# Commands used to build a shared archive.
+archive_cmds="\$CC -shared \$pic_flag \$libobjs \$deplibs \$compiler_flags \$wl-soname \$wl\$soname -o \$lib"
+archive_expsym_cmds="echo \\\"{ global:\\\" > \$output_objdir/\$libname.ver~
+            cat \$export_symbols | sed -e \\\"s/\\\\(.*\\\\)/\\\\1;/\\\" >> \$output_objdir/\$libname.ver~
+            echo \\\"local: *; };\\\" >> \$output_objdir/\$libname.ver~
+            \$CC -shared \$pic_flag \$libobjs \$deplibs \$compiler_flags \$wl-soname \$wl\$soname \$wl-version-script \$wl\$output_objdir/\$libname.ver -o \$lib"
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=""
+module_expsym_cmds=""
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld="yes"
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=""
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=""
+
+# Flag to hardcode $libdir into a binary during linking.
+# This must work even if $libdir does not exist
+hardcode_libdir_flag_spec="\$wl-rpath \$wl\$libdir"
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=""
+
+# Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=no
+
+# Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting $shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=no
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=no
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=unsupported
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=no
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=no
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=unknown
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=no
+
+# The commands to list exported symbols.
+export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | \$SED 's/.* //' | sort | uniq > \$export_symbols"
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*"
+
+# Symbols that must always be exported.
+include_expsyms=""
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=""
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=""
+
+# Specify filename containing input files.
+file_list_spec=""
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=immediate
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=""
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=""
+postdep_objects=""
+predeps=""
+postdeps=""
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=""
+
+# ### END LIBTOOL CONFIG
+
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x$2 in
+    x)
+        ;;
+    *:)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+        ;;
+    x:*)
+        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+        ;;
+    *)
+        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+
+
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in $*""; do
+      case $cc_temp in
+        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+##               by inline-source v2014-01-03.01
+
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.6
+package_revision=2.4.6
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+#   . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
+fi
+
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test set = \"\${$_G_var+set}\"; then
+          save_$_G_var=\$$_G_var
+          $_G_var=C
+	  export $_G_var
+	  _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+	  _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
+	fi"
+done
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp	$nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+    test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+    _G_progs_list=$1
+    _G_check_func=$2
+    _G_PATH=${3-"$PATH"}
+
+    _G_path_prog_max=0
+    _G_path_prog_found=false
+    _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+    for _G_dir in $_G_PATH; do
+      IFS=$_G_save_IFS
+      test -z "$_G_dir" && _G_dir=.
+      for _G_prog_name in $_G_progs_list; do
+        for _exeext in '' .EXE; do
+          _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+          func_executable_p "$_G_path_prog" || continue
+          case `"$_G_path_prog" --version 2>&1` in
+            *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+            *)     $_G_check_func $_G_path_prog
+		   func_path_progs_result=$func_check_prog_result
+		   ;;
+          esac
+          $_G_path_prog_found && break 3
+        done
+      done
+    done
+    IFS=$_G_save_IFS
+    test -z "$func_path_progs_result" && {
+      echo "no acceptable sed could be found in \$PATH" >&2
+      exit 1
+    }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+  _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+  for _G_i in 1 2 3 4 5 6 7; do
+    _G_sed_script=$_G_sed_script$nl$_G_sed_script
+  done
+  echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+  _G_sed_script=
+
+  func_check_prog_sed ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo '' >> conftest.nl
+      "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+  rm -f conftest.sed
+  SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+  func_check_prog_grep ()
+  {
+    _G_path_prog=$1
+
+    _G_count=0
+    _G_path_prog_max=0
+    printf 0123456789 >conftest.in
+    while :
+    do
+      cat conftest.in conftest.in >conftest.tmp
+      mv conftest.tmp conftest.in
+      cp conftest.in conftest.nl
+      echo 'GREP' >> conftest.nl
+      "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+      diff conftest.out conftest.nl >/dev/null 2>&1 || break
+      _G_count=`expr $_G_count + 1`
+      if test "$_G_count" -gt "$_G_path_prog_max"; then
+        # Best one so far, save it but keep looking for a better one
+        func_check_prog_result=$_G_path_prog
+        _G_path_prog_max=$_G_count
+      fi
+      # 10*(2^10) chars as input seems more than enough
+      test 10 -lt "$_G_count" && break
+    done
+    rm -f conftest.in conftest.tmp conftest.nl conftest.out
+  }
+
+  func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+  GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables.  These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
+
+: ${CP="cp -f"}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+
+
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same.  If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion.  Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'.  '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+  s/$_G_bs4/&\\
+/g
+  s/^$_G_bs2$_G_dollar/$_G_bs&/
+  s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+  s/\n//g"
+
+
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
+
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+#    debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
+
+# By convention, finish your script with:
+#
+#    exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
+
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
+
+# Make sure we have an absolute progpath for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
+     progdir=`cd "$progdir" && pwd`
+     progpath=$progdir/$progname
+     ;;
+  *)
+     _G_IFS=$IFS
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS=$_G_IFS
+       test -x "$progdir/$progname" && break
+     done
+     IFS=$_G_IFS
+     test -n "$progdir" || progdir=`pwd`
+     progpath=$progdir/$progname
+     ;;
+esac
+
+
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
+
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
+
+opt_dry_run=false
+opt_quiet=false
+opt_verbose=false
+
+# Categories 'all' and 'none' are always available.  Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
+
+# By default, display warnings according to 'opt_warning_types'.  Set
+# 'warning_func'  to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
+
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
+
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+    $debug_cmd
+
+    test -t 1 && {
+      # COLORTERM and USE_ANSI_COLORS environment variables take
+      # precedence, because most terminfo databases neglect to describe
+      # whether color sequences are supported.
+      test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+      if test 1 = "$USE_ANSI_COLORS"; then
+        # Standard ANSI escape sequences
+        tc_reset='[0m'
+        tc_bold='[1m';   tc_standout='[7m'
+        tc_red='[31m';   tc_green='[32m'
+        tc_blue='[34m';  tc_cyan='[36m'
+      else
+        # Otherwise trust the terminfo database after all.
+        test -n "`tput sgr0 2>/dev/null`" && {
+          tc_reset=`tput sgr0`
+          test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+          tc_standout=$tc_bold
+          test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+          test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+          test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+          test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+          test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+        }
+      fi
+    }
+
+    require_term_colors=:
+}
+
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+  # We should try to minimise forks, especially on Windows where they are
+  # unreasonably slow, so skip the feature probes when bash or zsh are
+  # being used:
+  if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+    : ${_G_HAVE_ARITH_OP="yes"}
+    : ${_G_HAVE_XSI_OPS="yes"}
+    # The += operator was introduced in bash 3.1
+    case $BASH_VERSION in
+      [12].* | 3.0 | 3.0*) ;;
+      *)
+        : ${_G_HAVE_PLUSEQ_OP="yes"}
+        ;;
+    esac
+  fi
+
+  # _G_HAVE_PLUSEQ_OP
+  # Can be empty, in which case the shell is probed, "yes" if += is
+  # useable or anything else if it does not work.
+  test -z "$_G_HAVE_PLUSEQ_OP" \
+    && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+    && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_append ()
+  {
+    $debug_cmd
+
+    eval "$1+=\$2"
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_append ()
+  {
+    $debug_cmd
+
+    eval "$1=\$$1\$2"
+  }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+  eval 'func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1+=\\ \$func_quote_for_eval_result"
+  }'
+else
+  func_append_quoted ()
+  {
+    $debug_cmd
+
+    func_quote_for_eval "$2"
+    eval "$1=\$$1\\ \$func_quote_for_eval_result"
+  }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE.  For example:
+#
+#   func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+    $debug_cmd
+
+    eval _G_current_value='`$ECHO $'$1'`'
+    _G_delim=`expr "$2" : '\(.\)'`
+
+    case $_G_delim$_G_current_value$_G_delim in
+      *"$2$_G_delim"*) ;;
+      *) func_append "$@" ;;
+    esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+  test -z "$_G_HAVE_ARITH_OP" \
+    && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+    && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+  eval 'func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=$(( $* ))
+  }'
+else
+  func_arith ()
+  {
+    $debug_cmd
+
+    func_arith_result=`expr "$@"`
+  }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  # If this shell supports suffix pattern removal, then use it to avoid
+  # forking. Hide the definitions single quotes in case the shell chokes
+  # on unsupported syntax...
+  _b='func_basename_result=${1##*/}'
+  _d='case $1 in
+        */*) func_dirname_result=${1%/*}$2 ;;
+        *  ) func_dirname_result=$3        ;;
+      esac'
+
+else
+  # ...otherwise fall back to using sed.
+  _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+  _d='func_dirname_result=`$ECHO "$1"  |$SED "$sed_dirname"`
+      if test "X$func_dirname_result" = "X$1"; then
+        func_dirname_result=$3
+      else
+        func_append func_dirname_result "$2"
+      fi'
+fi
+
+eval 'func_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+    $debug_cmd
+
+    '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+    $debug_cmd
+
+    '"$_b"'
+    '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    _G_infix=$1; shift
+    _G_indent=$_G_infix
+    _G_prefix="$progname: $_G_infix: "
+    _G_message=$*
+
+    # Strip color escape sequences before counting printable length
+    for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+    do
+      test -n "$_G_tc" && {
+        _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+        _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+      }
+    done
+    _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`"  " ## exclude from sc_prohibit_nested_quotes
+
+    func_echo_infix_1_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_infix_1_IFS
+      $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+      _G_prefix=$_G_indent
+    done
+    IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    func_echo_infix_1 "  $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    $debug_cmd
+
+    func_error "$*"
+    exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $debug_cmd
+
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+  test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=${#1}
+  }'
+else
+  func_len ()
+  {
+    $debug_cmd
+
+    func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+  }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    $debug_cmd
+
+    _G_directory_path=$1
+    _G_dir_list=
+
+    if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+      # Protect directory names starting with '-'
+      case $_G_directory_path in
+        -*) _G_directory_path=./$_G_directory_path ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$_G_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        _G_dir_list=$_G_directory_path:$_G_dir_list
+
+        # If the last portion added has no slash in it, the list is done
+        case $_G_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
+      done
+      _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
+
+      func_mkdir_p_IFS=$IFS; IFS=:
+      for _G_dir in $_G_dir_list; do
+	IFS=$func_mkdir_p_IFS
+        # mkdir can fail with a 'File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$_G_dir" 2>/dev/null || :
+      done
+      IFS=$func_mkdir_p_IFS
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$_G_directory_path" || \
+        func_fatal_error "Failed to create '$1'"
+    fi
+}
+
+
+# func_mktempdir [BASENAME]
+# -------------------------
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, BASENAME is the basename for that directory.
+func_mktempdir ()
+{
+    $debug_cmd
+
+    _G_template=${TMPDIR-/tmp}/${1-$progname}
+
+    if test : = "$opt_dry_run"; then
+      # Return a directory name, but don't create it in dry-run mode
+      _G_tmpdir=$_G_template-$$
+    else
+
+      # If mktemp works, use that first and foremost
+      _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$_G_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        _G_tmpdir=$_G_template-${RANDOM-0}$$
+
+        func_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$_G_tmpdir"
+        umask $func_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$_G_tmpdir" || \
+        func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+    fi
+
+    $ECHO "$_G_tmpdir"
+}
+
+
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
+{
+    $debug_cmd
+
+    # These SED scripts presuppose an absolute path with a trailing slash.
+    _G_pathcar='s|^/\([^/]*\).*$|\1|'
+    _G_pathcdr='s|^/[^/]*||'
+    _G_removedotparts=':dotsl
+		s|/\./|/|g
+		t dotsl
+		s|/\.$|/|'
+    _G_collapseslashes='s|/\{1,\}|/|g'
+    _G_finalslash='s|/*$|/|'
+
+    # Start from root dir and reassemble the path.
+    func_normal_abspath_result=
+    func_normal_abspath_tpath=$1
+    func_normal_abspath_altnamespace=
+    case $func_normal_abspath_tpath in
+      "")
+        # Empty path, that just means $cwd.
+        func_stripname '' '/' "`pwd`"
+        func_normal_abspath_result=$func_stripname_result
+        return
+        ;;
+      # The next three entries are used to spot a run of precisely
+      # two leading slashes without using negated character classes;
+      # we take advantage of case's first-match behaviour.
+      ///*)
+        # Unusual form of absolute path, do nothing.
+        ;;
+      //*)
+        # Not necessarily an ordinary path; POSIX reserves leading '//'
+        # and for example Cygwin uses it to access remote file shares
+        # over CIFS/SMB, so we conserve a leading double slash if found.
+        func_normal_abspath_altnamespace=/
+        ;;
+      /*)
+        # Absolute path, do nothing.
+        ;;
+      *)
+        # Relative path, prepend $cwd.
+        func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+        ;;
+    esac
+
+    # Cancel out all the simple stuff to save iterations.  We also want
+    # the path to end with a slash for ease of parsing, so make sure
+    # there is one (and only one) here.
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+    while :; do
+      # Processed it all yet?
+      if test / = "$func_normal_abspath_tpath"; then
+        # If we ascended to the root using ".." the result may be empty now.
+        if test -z "$func_normal_abspath_result"; then
+          func_normal_abspath_result=/
+        fi
+        break
+      fi
+      func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcar"`
+      func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+          -e "$_G_pathcdr"`
+      # Figure out what to do with it
+      case $func_normal_abspath_tcomponent in
+        "")
+          # Trailing empty path component, ignore it.
+          ;;
+        ..)
+          # Parent dir; strip last assembled component from result.
+          func_dirname "$func_normal_abspath_result"
+          func_normal_abspath_result=$func_dirname_result
+          ;;
+        *)
+          # Actual path component, append it.
+          func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+          ;;
+      esac
+    done
+    # Restore leading double-slash if one was found on entry.
+    func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+    $debug_cmd
+
+    $opt_quiet || func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+    $debug_cmd
+
+    func_relative_path_result=
+    func_normal_abspath "$1"
+    func_relative_path_tlibdir=$func_normal_abspath_result
+    func_normal_abspath "$2"
+    func_relative_path_tbindir=$func_normal_abspath_result
+
+    # Ascend the tree starting from libdir
+    while :; do
+      # check if we have found a prefix of bindir
+      case $func_relative_path_tbindir in
+        $func_relative_path_tlibdir)
+          # found an exact match
+          func_relative_path_tcancelled=
+          break
+          ;;
+        $func_relative_path_tlibdir*)
+          # found a matching prefix
+          func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+          func_relative_path_tcancelled=$func_stripname_result
+          if test -z "$func_relative_path_result"; then
+            func_relative_path_result=.
+          fi
+          break
+          ;;
+        *)
+          func_dirname $func_relative_path_tlibdir
+          func_relative_path_tlibdir=$func_dirname_result
+          if test -z "$func_relative_path_tlibdir"; then
+            # Have to descend all the way to the root!
+            func_relative_path_result=../$func_relative_path_result
+            func_relative_path_tcancelled=$func_relative_path_tbindir
+            break
+          fi
+          func_relative_path_result=../$func_relative_path_result
+          ;;
+      esac
+    done
+
+    # Now calculate path; take care to avoid doubling-up slashes.
+    func_stripname '' '/' "$func_relative_path_result"
+    func_relative_path_result=$func_stripname_result
+    func_stripname '/' '/' "$func_relative_path_tcancelled"
+    if test -n "$func_stripname_result"; then
+      func_append func_relative_path_result "/$func_stripname_result"
+    fi
+
+    # Normalisation. If bindir is libdir, return '.' else relative path.
+    if test -n "$func_relative_path_result"; then
+      func_stripname './' '' "$func_relative_path_result"
+      func_relative_path_result=$func_stripname_result
+    fi
+
+    test -n "$func_relative_path_result" || func_relative_path_result=.
+
+    :
+}
+
+
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+#   i) func_quote_for_eval_result
+#      double-quoted, suitable for a subsequent eval
+#  ii) func_quote_for_eval_unquoted_result
+#      has all characters that are still active within double
+#      quotes backslashified.
+func_quote_for_eval ()
+{
+    $debug_cmd
+
+    func_quote_for_eval_unquoted_result=
+    func_quote_for_eval_result=
+    while test 0 -lt $#; do
+      case $1 in
+        *[\\\`\"\$]*)
+	  _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+        *)
+          _G_unquoted_arg=$1 ;;
+      esac
+      if test -n "$func_quote_for_eval_unquoted_result"; then
+	func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+      else
+        func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+      fi
+
+      case $_G_unquoted_arg in
+        # Double-quote args containing shell metacharacters to delay
+        # word splitting, command substitution and variable expansion
+        # for a subsequent eval.
+        # Many Bourne shells cannot handle close brackets correctly
+        # in scan sets, so we specify it separately.
+        *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+          _G_quoted_arg=\"$_G_unquoted_arg\"
+          ;;
+        *)
+          _G_quoted_arg=$_G_unquoted_arg
+	  ;;
+      esac
+
+      if test -n "$func_quote_for_eval_result"; then
+	func_append func_quote_for_eval_result " $_G_quoted_arg"
+      else
+        func_append func_quote_for_eval_result "$_G_quoted_arg"
+      fi
+      shift
+    done
+}
+
+
+# func_quote_for_expand ARG
+# -------------------------
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    $debug_cmd
+
+    case $1 in
+      *[\\\`\"]*)
+	_G_arg=`$ECHO "$1" | $SED \
+	    -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        _G_arg=$1 ;;
+    esac
+
+    case $_G_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        _G_arg=\"$_G_arg\"
+        ;;
+    esac
+
+    func_quote_for_expand_result=$_G_arg
+}
+
+
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_stripname ()
+  {
+    $debug_cmd
+
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary variable first.
+    func_stripname_result=$3
+    func_stripname_result=${func_stripname_result#"$1"}
+    func_stripname_result=${func_stripname_result%"$2"}
+  }'
+else
+  func_stripname ()
+  {
+    $debug_cmd
+
+    case $2 in
+      .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+      *)  func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+    esac
+  }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    func_quote_for_expand "$_G_cmd"
+    eval "func_notquiet $func_quote_for_expand_result"
+
+    $opt_dry_run || {
+      eval "$_G_cmd"
+      _G_status=$?
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
+      fi
+    }
+}
+
+
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    $debug_cmd
+
+    _G_cmd=$1
+    _G_fail_exp=${2-':'}
+
+    $opt_quiet || {
+      func_quote_for_expand "$_G_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    $opt_dry_run || {
+      eval "$_G_user_locale
+	    $_G_cmd"
+      _G_status=$?
+      eval "$_G_safe_locale"
+      if test 0 -ne "$_G_status"; then
+	eval "(exit $_G_status); $_G_fail_exp"
+      fi
+    }
+}
+
+
+# func_tr_sh
+# ----------
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+    $debug_cmd
+
+    case $1 in
+    [0-9]* | *[!a-zA-Z0-9_]*)
+      func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+      ;;
+    * )
+      func_tr_sh_result=$1
+      ;;
+    esac
+}
+
+
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $debug_cmd
+
+    $opt_verbose && func_echo "$*"
+
+    :
+}
+
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
+{
+    $debug_cmd
+
+    $require_term_colors
+
+    func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+    $debug_cmd
+
+    # CATEGORY must be in the warning_categories list!
+    case " $warning_categories " in
+      *" $1 "*) ;;
+      *) func_internal_error "invalid warning category '$1'" ;;
+    esac
+
+    _G_category=$1
+    shift
+
+    case " $opt_warning_types " in
+      *" $_G_category "*) $warning_func ${1+"$@"} ;;
+    esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+    $debug_cmd
+
+    printf '%s\n%s\n' "$1" "$2" \
+      | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false.  Use it like this:
+#
+#  func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+    $debug_cmd
+
+    test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+#   #!/bin/sh
+#   . relative/path/to/funclib.sh
+#   . relative/path/to/options-parser
+#   scriptversion=1.0
+#   func_options ${1+"$@"}
+#   eval set dummy "$func_options_result"; shift
+#   ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'.  Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+       --debug        enable verbose shell tracing
+   -W, --warnings=CATEGORY
+                      report the warnings falling in CATEGORY [all]
+   -v, --verbose      verbosely report processing
+       --version      print version information and exit
+   -h, --help         print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+       'all'          show all warnings
+       'none'         turn off all the warnings
+       'error'        warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code.  A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+    $debug_cmd
+
+    func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns.  FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not accept hook functions." ;;
+    esac
+
+    eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+    $debug_cmd
+
+    eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+    $debug_cmd
+
+    case " $hookable_fns " in
+      *" $1 "*) ;;
+      *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+    esac
+
+    eval _G_hook_fns=\$$1_hooks; shift
+
+    for _G_hook in $_G_hook_fns; do
+      eval $_G_hook '"$@"'
+
+      # store returned options list back into positional
+      # parameters for next 'cmd' execution.
+      eval _G_hook_result=\$${_G_hook}_result
+      eval set dummy "$_G_hook_result"; shift
+    done
+
+    func_quote_for_eval ${1+"$@"}
+    func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'.  Like this:
+#
+#    my_options_prep ()
+#    {
+#        $debug_cmd
+#
+#        # Extend the existing usage message.
+#        usage_message=$usage_message'
+#      -s, --silent       don'\''t print informational messages
+#    '
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_options_prep_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_options_prep my_options_prep
+#
+#
+#    my_silent_option ()
+#    {
+#        $debug_cmd
+#
+#        # Note that for efficiency, we parse as many options as we can
+#        # recognise in a loop before passing the remainder back to the
+#        # caller on the first unrecognised argument we encounter.
+#        while test $# -gt 0; do
+#          opt=$1; shift
+#          case $opt in
+#            --silent|-s) opt_silent=: ;;
+#            # Separate non-argument short options:
+#            -s*)         func_split_short_opt "$_G_opt"
+#                         set dummy "$func_split_short_opt_name" \
+#                             "-$func_split_short_opt_arg" ${1+"$@"}
+#                         shift
+#                         ;;
+#            *)            set dummy "$_G_opt" "$*"; shift; break ;;
+#          esac
+#        done
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_silent_option_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_parse_options my_silent_option
+#
+#
+#    my_option_validation ()
+#    {
+#        $debug_cmd
+#
+#        $opt_silent && $opt_verbose && func_fatal_help "\
+#    '--silent' and '--verbose' options are mutually exclusive."
+#
+#        func_quote_for_eval ${1+"$@"}
+#        my_option_validation_result=$func_quote_for_eval_result
+#    }
+#    func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse.  It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+    $debug_cmd
+
+    func_options_prep ${1+"$@"}
+    eval func_parse_options \
+        ${func_options_prep_result+"$func_options_prep_result"}
+    eval func_validate_options \
+        ${func_parse_options_result+"$func_parse_options_result"}
+
+    eval func_run_hooks func_options \
+        ${func_validate_options_result+"$func_validate_options_result"}
+
+    # save modified positional parameters for caller
+    func_options_result=$func_run_hooks_result
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters.  If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+    $debug_cmd
+
+    # Option defaults:
+    opt_verbose=false
+    opt_warning_types=
+
+    func_run_hooks func_options_prep ${1+"$@"}
+
+    # save modified positional parameters for caller
+    func_options_prep_result=$func_run_hooks_result
+}
+
+
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+    $debug_cmd
+
+    func_parse_options_result=
+
+    # this just eases exit handling
+    while test $# -gt 0; do
+      # Defer to hook functions for initial option parsing, so they
+      # get priority in the event of reusing an option name.
+      func_run_hooks func_parse_options ${1+"$@"}
+
+      # Adjust func_parse_options positional parameters to match
+      eval set dummy "$func_run_hooks_result"; shift
+
+      # Break out of the loop if we already parsed every option.
+      test $# -gt 0 || break
+
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --debug|-x)   debug_cmd='set -x'
+                      func_echo "enabling shell trace mode"
+                      $debug_cmd
+                      ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                      set dummy --warnings none ${1+"$@"}
+                      shift
+		      ;;
+
+        --warnings|--warning|-W)
+                      test $# = 0 && func_missing_arg $_G_opt && break
+                      case " $warning_categories $1" in
+                        *" $1 "*)
+                          # trailing space prevents matching last $1 above
+                          func_append_uniq opt_warning_types " $1"
+                          ;;
+                        *all)
+                          opt_warning_types=$warning_categories
+                          ;;
+                        *none)
+                          opt_warning_types=none
+                          warning_func=:
+                          ;;
+                        *error)
+                          opt_warning_types=$warning_categories
+                          warning_func=func_fatal_error
+                          ;;
+                        *)
+                          func_fatal_error \
+                             "unsupported warning category: '$1'"
+                          ;;
+                      esac
+                      shift
+                      ;;
+
+        --verbose|-v) opt_verbose=: ;;
+        --version)    func_version ;;
+        -\?|-h)       func_usage ;;
+        --help)       func_help ;;
+
+	# Separate optargs to long options (plugins may need this):
+	--*=*)        func_split_equals "$_G_opt"
+	              set dummy "$func_split_equals_lhs" \
+                          "$func_split_equals_rhs" ${1+"$@"}
+                      shift
+                      ;;
+
+       # Separate optargs to short options:
+        -W*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        # Separate non-argument short options:
+        -\?*|-h*|-v*|-x*)
+                      func_split_short_opt "$_G_opt"
+                      set dummy "$func_split_short_opt_name" \
+                          "-$func_split_short_opt_arg" ${1+"$@"}
+                      shift
+                      ;;
+
+        --)           break ;;
+        -*)           func_fatal_help "unrecognised option: '$_G_opt'" ;;
+        *)            set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+      esac
+    done
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    func_parse_options_result=$func_quote_for_eval_result
+}
+
+
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+    $debug_cmd
+
+    # Display all warnings if -W was not given.
+    test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+    func_run_hooks func_validate_options ${1+"$@"}
+
+    # Bail if the options were screwed!
+    $exit_cmd $EXIT_FAILURE
+
+    # save modified positional parameters for caller
+    func_validate_options_result=$func_run_hooks_result
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    eval \$ECHO \""$fatal_help"\"
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
+func_help ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message"
+    exit 0
+}
+
+
+# func_missing_arg ARGNAME
+# ------------------------
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $debug_cmd
+
+    func_error "Missing argument for '$1'."
+    exit_cmd=exit
+}
+
+
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+    && (eval 'x=a/b/c;
+      test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+    && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=${1%%=*}
+      func_split_equals_rhs=${1#*=}
+      test "x$func_split_equals_lhs" = "x$1" \
+        && func_split_equals_rhs=
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_equals ()
+  {
+      $debug_cmd
+
+      func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+      func_split_equals_rhs=
+      test "x$func_split_equals_lhs" = "x$1" \
+        || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+  }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+  # This is an XSI compatible shell, allowing a faster implementation...
+  eval 'func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_arg=${1#??}
+      func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+  }'
+else
+  # ...otherwise fall back to using expr, which is often a shell builtin.
+  func_split_short_opt ()
+  {
+      $debug_cmd
+
+      func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+      func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+  }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+    exit 0
+}
+
+
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
+{
+    $debug_cmd
+
+    eval \$ECHO \""Usage: $usage"\"
+    echo
+    $SED -n 's|^# ||
+        /^Written by/{
+          x;p;x
+        }
+	h
+	/^Written by/q' < "$progpath"
+    echo
+    eval \$ECHO \""$usage_message"\"
+}
+
+
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $debug_cmd
+
+    printf '%s\n' "$progname $scriptversion"
+    $SED -n '
+        /(C)/!b go
+        :more
+        /\./!{
+          N
+          s|\n# | |
+          b more
+        }
+        :go
+        /^# Written by /,/# warranty; / {
+          s|^# ||
+          s|^# *$||
+          s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+          p
+        }
+        /^# Written by / {
+          s|^# ||
+          p
+        }
+        /^warranty; /q' < "$progpath"
+
+    exit $?
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
+
+
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
+{
+    $debug_cmd
+
+    _G_message=$*
+
+    func_echo_IFS=$IFS
+    IFS=$nl
+    for _G_line in $_G_message; do
+      IFS=$func_echo_IFS
+      $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+    done
+    IFS=$func_echo_IFS
+}
+
+
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
+{
+    $debug_cmd
+
+    $warning_func ${1+"$@"}
+}
+
+
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+       --config             show all configuration variables
+       --debug              enable verbose shell tracing
+   -n, --dry-run            display commands without modifying any files
+       --features           display basic configuration information and exit
+       --mode=MODE          use operation mode MODE
+       --no-warnings        equivalent to '-Wnone'
+       --preserve-dup-deps  don't remove duplicate dependency libraries
+       --quiet, --silent    don't print informational messages
+       --tag=TAG            use configuration variables from tag TAG
+   -v, --verbose            print more informational messages than default
+       --version            print version information
+   -W, --warnings=CATEGORY  report the warnings falling in CATEGORY [all]
+   -h, --help, --help-all   print short, long, or detailed help message
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
+{
+    $debug_cmd
+
+    func_usage_message
+    $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+       clean           remove files from the build directory
+       compile         compile a source file into a libtool object
+       execute         automatically set library path, then run a program
+       finish          complete the installation of libtool libraries
+       install         install libraries or executables
+       link            create a library or an executable
+       uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+       host-triplet:   $host
+       shell:          $SHELL
+       compiler:       $LTCC
+       compiler flags: $LTCFLAGS
+       linker:         $LD (gnu? $with_gnu_ld)
+       version:        $progname (GNU libtool) 2.4.6
+       automake:       `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+       autoconf:       `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+    exit 0
+}
+
+
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+  eval 'func_lo2o ()
+  {
+    case $1 in
+      *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+      *   ) func_lo2o_result=$1               ;;
+    esac
+  }'
+
+  # func_xform LIBOBJ-OR-SOURCE
+  # ---------------------------
+  # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+  # suffix to a '.lo' libtool-object suffix.
+  eval 'func_xform ()
+  {
+    func_xform_result=${1%.*}.lo
+  }'
+else
+  # ...otherwise fall back to using sed.
+  func_lo2o ()
+  {
+    func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+  }
+
+  func_xform ()
+  {
+    func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+  }
+fi
+
+
+# func_fatal_configuration ARG...
+# -------------------------------
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func__fatal_error ${1+"$@"} \
+      "See the $PACKAGE documentation for more information." \
+      "Fatal configuration error."
+}
+
+
+# func_config
+# -----------
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
+
+    exit $?
+}
+
+
+# func_features
+# -------------
+# Display the features supported by this script.
+func_features ()
+{
+    echo "host: $host"
+    if test yes = "$build_libtool_libs"; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test yes = "$build_old_libs"; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+
+    exit $?
+}
+
+
+# func_enable_tag TAGNAME
+# -----------------------
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+    # Global variable:
+    tagname=$1
+
+    re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+    re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+    sed_extractcf=/$re_begincf/,/$re_endcf/p
+
+    # Validate tagname.
+    case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+        func_fatal_error "invalid tag name: $tagname"
+        ;;
+    esac
+
+    # Don't test for the "default" C tag, as we know it's
+    # there but not specially marked.
+    case $tagname in
+        CC) ;;
+    *)
+        if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	  taglist="$taglist $tagname"
+
+	  # Evaluate the configuration.  Be careful to quote the path
+	  # and the sed script, to avoid splitting on whitespace, but
+	  # also don't use non-portable quotes within backquotes within
+	  # quotes we have to do it in 2 steps:
+	  extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	  eval "$extractedcf"
+        else
+	  func_error "ignoring unknown tag $tagname"
+        fi
+        ;;
+    esac
+}
+
+
+# func_check_version_match
+# ------------------------
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+    if test "$package_revision" != "$macro_revision"; then
+      if test "$VERSION" != "$macro_version"; then
+        if test -z "$macro_version"; then
+          cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+        else
+          cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+        fi
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+      fi
+
+      exit $EXIT_MISMATCH
+    fi
+}
+
+
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+    $debug_mode
+
+    # Option defaults:
+    opt_config=false
+    opt_dlopen=
+    opt_dry_run=false
+    opt_help=false
+    opt_mode=
+    opt_preserve_dup_deps=false
+    opt_quiet=false
+
+    nonopt=
+    preserve_args=
+
+    # Shorthand for --mode=foo, only valid as the first argument
+    case $1 in
+    clean|clea|cle|cl)
+      shift; set dummy --mode clean ${1+"$@"}; shift
+      ;;
+    compile|compil|compi|comp|com|co|c)
+      shift; set dummy --mode compile ${1+"$@"}; shift
+      ;;
+    execute|execut|execu|exec|exe|ex|e)
+      shift; set dummy --mode execute ${1+"$@"}; shift
+      ;;
+    finish|finis|fini|fin|fi|f)
+      shift; set dummy --mode finish ${1+"$@"}; shift
+      ;;
+    install|instal|insta|inst|ins|in|i)
+      shift; set dummy --mode install ${1+"$@"}; shift
+      ;;
+    link|lin|li|l)
+      shift; set dummy --mode link ${1+"$@"}; shift
+      ;;
+    uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+      shift; set dummy --mode uninstall ${1+"$@"}; shift
+      ;;
+    esac
+
+    # Pass back the list of options.
+    func_quote_for_eval ${1+"$@"}
+    libtool_options_prep_result=$func_quote_for_eval_result
+}
+func_add_hook func_options_prep libtool_options_prep
+
+
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+    $debug_cmd
+
+    # Perform our own loop to consume as many options as possible in
+    # each iteration.
+    while test $# -gt 0; do
+      _G_opt=$1
+      shift
+      case $_G_opt in
+        --dry-run|--dryrun|-n)
+                        opt_dry_run=:
+                        ;;
+
+        --config)       func_config ;;
+
+        --dlopen|-dlopen)
+                        opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+                        shift
+                        ;;
+
+        --preserve-dup-deps)
+                        opt_preserve_dup_deps=: ;;
+
+        --features)     func_features ;;
+
+        --finish)       set dummy --mode finish ${1+"$@"}; shift ;;
+
+        --help)         opt_help=: ;;
+
+        --help-all)     opt_help=': help-all' ;;
+
+        --mode)         test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_mode=$1
+                        case $1 in
+                          # Valid mode arguments:
+                          clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+                          # Catch anything else as an error
+                          *) func_error "invalid argument for $_G_opt"
+                             exit_cmd=exit
+                             break
+                             ;;
+                        esac
+                        shift
+                        ;;
+
+        --no-silent|--no-quiet)
+                        opt_quiet=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-warnings|--no-warning|--no-warn)
+                        opt_warning=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --no-verbose)
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --silent|--quiet)
+                        opt_quiet=:
+                        opt_verbose=false
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+        --tag)          test $# = 0 && func_missing_arg $_G_opt && break
+                        opt_tag=$1
+                        func_append preserve_args " $_G_opt $1"
+                        func_enable_tag "$1"
+                        shift
+                        ;;
+
+        --verbose|-v)   opt_quiet=false
+                        opt_verbose=:
+                        func_append preserve_args " $_G_opt"
+                        ;;
+
+	# An option not handled by this hook function:
+        *)		set dummy "$_G_opt" ${1+"$@"};	shift; break  ;;
+      esac
+    done
+
+
+    # save modified positional parameters for caller
+    func_quote_for_eval ${1+"$@"}
+    libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
+
+
+
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+    # save first non-option argument
+    if test 0 -lt $#; then
+      nonopt=$1
+      shift
+    fi
+
+    # preserve --debug
+    test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+    case $host in
+      # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+      # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+      *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+        # don't eliminate duplications in $postdeps and $predeps
+        opt_duplicate_compiler_generated_deps=:
+        ;;
+      *)
+        opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+        ;;
+    esac
+
+    $opt_help || {
+      # Sanity checks first:
+      func_check_version_match
+
+      test yes != "$build_libtool_libs" \
+        && test yes != "$build_old_libs" \
+        && func_fatal_configuration "not configured to build any kind of library"
+
+      # Darwin sucks
+      eval std_shrext=\"$shrext_cmds\"
+
+      # Only execute mode is allowed to have -dlopen flags.
+      if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+        func_error "unrecognized option '-dlopen'"
+        $ECHO "$help" 1>&2
+        exit $EXIT_FAILURE
+      fi
+
+      # Change the help message to a mode-specific one.
+      generic_help=$help
+      help="Try '$progname --help --mode=$opt_mode' for more information."
+    }
+
+    # Pass back the unparsed argument list
+    func_quote_for_eval ${1+"$@"}
+    libtool_validate_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_validate_options libtool_validate_options
+
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+  $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if 'file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case $lalib_p_line in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test yes = "$lalib_p"
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    test -f "$1" &&
+      $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $debug_cmd
+
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$sp$nl
+      eval cmd=\"$cmd\"
+      IFS=$save_ifs
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# 'FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $debug_cmd
+
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case $lt_sysroot:$1 in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result='='$func_stripname_result
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $debug_cmd
+
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	func_append_quoted CC_quoted "$arg"
+      done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_append_quoted CC_quoted "$arg"
+	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+	    case "$@ " in
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with '--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=$1
+    if test yes = "$build_libtool_libs"; then
+      write_lobj=\'$2\'
+    else
+      write_lobj=none
+    fi
+
+    if test yes = "$build_old_libs"; then
+      write_oldobj=\'$3\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "$write_libobj"
+    }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $debug_cmd
+
+  func_convert_core_file_wine_to_w32_result=$1
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $debug_cmd
+
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result"; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $debug_cmd
+
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $debug_cmd
+
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $debug_cmd
+
+  if test -z "$2" && test -n "$1"; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  '$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result=$1
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $debug_cmd
+
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  '$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result=$3
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $debug_cmd
+
+  case $4 in
+  $1 ) func_to_host_path_result=$3$func_to_host_path_result
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via '$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $debug_cmd
+
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $debug_cmd
+
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result=$1
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result=$func_convert_core_msys_to_w32_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result=$func_cygpath_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_file_result=$1
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result=$func_cygpath_result
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via '$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $debug_cmd
+
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd=func_convert_path_$func_stripname_result
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $debug_cmd
+
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result=$1
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result=$func_convert_core_msys_to_w32_result
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result=$func_cygpath_result
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $debug_cmd
+
+  func_to_host_path_result=$1
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result=$func_cygpath_result
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+  $debug_cmd
+
+  func_dll_def_p_tmp=`$SED -n \
+    -e 's/^[	 ]*//' \
+    -e '/^\(;.*\)*$/d' \
+    -e 's/^\(EXPORTS\|LIBRARY\)\([	 ].*\)*$/DEF/p' \
+    -e q \
+    "$1"`
+  test DEF = "$func_dll_def_p_tmp"
+}
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $debug_cmd
+
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile=$nonopt  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg=$arg
+	arg_mode=normal
+	;;
+
+      target )
+	libobj=$arg
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify '-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          func_append pie_flag " $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  func_append later " $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs=$IFS; IFS=,
+	  for arg in $args; do
+	    IFS=$save_ifs
+	    func_append_quoted lastarg "$arg"
+	  done
+	  IFS=$save_ifs
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+
+	  # Add the arguments to base_compile.
+	  func_append base_compile " $lastarg"
+	  continue
+	  ;;
+
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg=$srcfile
+	  srcfile=$arg
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      func_append_quoted base_compile "$lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      func_fatal_error "you must specify an argument for -Xcompile"
+      ;;
+    target)
+      func_fatal_error "you must specify a target with '-o'"
+      ;;
+    *)
+      # Get the name of the library object.
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj=$func_basename_result
+      }
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    case $libobj in
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
+    esac
+
+    case $libobj in
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+    *)
+      func_fatal_error "cannot determine name of library object from '$libobj'"
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -shared)
+	test yes = "$build_libtool_libs" \
+	  || func_fatal_configuration "cannot build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name '$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname=$func_basename_result
+    xdir=$func_dirname_result
+    lobj=$xdir$objdir/$objname
+
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
+
+    # Delete any leftover library objects.
+    if test yes = "$build_old_libs"; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
+      pic_mode=default
+      ;;
+    esac
+    if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test no = "$compiler_c_o"; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+      lockfile=$output_obj.lock
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test yes = "$need_locks"; then
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test warn = "$need_locks"; then
+      if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+      func_append removelist " $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
+    fi
+
+    $opt_dry_run || $RM $removelist
+    func_append removelist " $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test yes = "$build_libtool_libs"; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test no != "$pic_mode"; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      func_mkdir_p "$xdir$objdir"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	func_append command " -o $lobj"
+      fi
+
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+      if test warn = "$need_locks" &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+
+      # Allow error messages only from the first compilation.
+      if test yes = "$suppress_opt"; then
+	suppress_output=' >/dev/null 2>&1'
+      fi
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test yes = "$build_old_libs"; then
+      if test yes != "$pic_mode"; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test yes = "$compiler_c_o"; then
+	func_append command " -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      func_append command "$suppress_output"
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+      if test warn = "$need_locks" &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test no != "$need_locks"; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+  test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $opt_mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
+  -shared           do not build a '.o' file suitable for static linking
+  -static           only build a '.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to '-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the '--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the 'install' or 'cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
+  -dlopen FILE      '-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  use a list of object files found in FILE to specify objects
+  -os2dllname NAME  force a short DLL name on OS/2 (no effect on other OSes)
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with '-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in '.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
+
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm').  RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode '$opt_mode'"
+        ;;
+    esac
+
+    echo
+    $ECHO "Try '$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test : = "$opt_help"; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | $SED -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    $SED '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $debug_cmd
+
+    # The first argument is the command name.
+    cmd=$nonopt
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $opt_dlopen; do
+      test -f "$file" \
+	|| func_fatal_help "'$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "'$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "'$file' was not linked with '-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir=$func_dirname_result
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  func_append dir "/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir=$func_dirname_result
+	;;
+
+      *)
+	func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir=$absdir
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic=$magic
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -* | *.la | *.lo ) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file=$progdir/$program
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file=$progdir/$program
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_append_quoted args "$file"
+    done
+
+    if $opt_dry_run; then
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    else
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd=\$cmd$args
+    fi
+}
+
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $debug_cmd
+
+    libs=
+    libdirs=
+    admincmds=
+
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
+
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "'$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument '$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and '=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    $opt_quiet && exit $EXIT_SUCCESS
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the '-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the '$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the '$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
+
+	$ECHO "   - use the '$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
+      fi
+      echo
+
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
+    exit $EXIT_SUCCESS
+}
+
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $debug_cmd
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
+       # Allow the use of GNU shtool's install command.
+       case $nonopt in *shtool*) :;; *) false;; esac
+    then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=false
+    stripme=
+    no_mode=:
+    for arg
+    do
+      arg2=
+      if test -n "$dest"; then
+	func_append files " $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=: ;;
+      -f)
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  if test X-m = "X$prev" && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the '$prev' option requires an argument"
+
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=:
+    if $isdir; then
+      destdir=$dest
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir=$func_dirname_result
+      destname=$func_basename_result
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "'$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "'$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic=$magic
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	func_append staticlibs " $file"
+	;;
+
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "'$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append current_libdirs " $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append future_libdirs " $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir=$func_dirname_result
+	func_append dir "$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking '$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname=$1
+	  shift
+
+	  srcname=$realname
+	  test -n "$relink_command" && srcname=${realname}T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme=$stripme
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  os2*)
+	    case $realname in
+	    *_dll.a)
+	      tstripme=
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try 'ln -sf' first, because the 'ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib=$destdir/$realname
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name=$func_basename_result
+	instname=$dir/${name}i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile=$destdir/$destname
+	else
+	  func_basename "$file"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest=$destfile
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to '$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test yes = "$build_old_libs"; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile=$destdir/$destname
+	else
+	  func_basename "$file"
+	  destfile=$func_basename_result
+	  destfile=$destdir/$destfile
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=.exe
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script '$wrapper'"
+
+	  finalize=:
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "'$lib' has not been installed in '$libdir'"
+	      finalize=false
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test no = "$fast_install" && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if $finalize; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file=$func_basename_result
+	        outputname=$tmpdir/$file
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_quiet || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink '$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file=$outputname
+	      else
+	        func_warning "cannot relink '$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name=$func_basename_result
+
+      # Set up the ranlib parameters.
+      oldlib=$destdir/$name
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run '$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $debug_cmd
+
+    my_outputname=$1
+    my_originator=$2
+    my_pic_p=${3-false}
+    my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms=${my_outputname}S.c
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist=$output_objdir/$my_outputname.nm
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test yes = "$dlself"; then
+	  func_verbose "generating symbol list for '$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols=$output_objdir/$outputname.exp
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin* | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from '$dlprefile'"
+	  func_basename "$dlprefile"
+	  name=$func_basename_result
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname"; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename=$func_basename_result
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename"; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  func_show_eval '$RM "${nlist}I"'
+	  if test -n "$global_symbol_to_import"; then
+	    eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+	  fi
+
+	  echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+  LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+  for (; symbol->name; ++symbol)
+    {"
+	    $SED 's/.*/      if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+	    echo >> "$output_objdir/$my_dlsyms" "\
+    }
+}"
+	  fi
+	  echo >> "$output_objdir/$my_dlsyms" "\
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{ {\"$my_originator\", (void *) 0},"
+
+	  if test -s "$nlist"I; then
+	    echo >> "$output_objdir/$my_dlsyms" "\
+  {\"@INIT@\", (void *) &lt_syminit},"
+	  fi
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  echo >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    $my_pic_p && pic_flag_for_symtable=" $pic_flag"
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) func_append symtab_cflags " $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj=$output_objdir/${my_outputname}S.$objext
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for '$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $debug_cmd
+
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+  $debug_cmd
+
+  win32_libid_type=unknown
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      case $nm_interface in
+      "MS dumpbin")
+	if func_cygming_ms_implib_p "$1" ||
+	   func_cygming_gnu_implib_p "$1"
+	then
+	  win32_nmres=import
+	else
+	  win32_nmres=
+	fi
+	;;
+      *)
+	func_to_tool_file "$1" func_convert_file_msys_to_w32
+	win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	  $SED -n -e '
+	    1,100{
+		/ I /{
+		    s|.*|import|
+		    p
+		    q
+		}
+	    }'`
+	;;
+      esac
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $debug_cmd
+
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $debug_cmd
+
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive that possess that section. Heuristic: eliminate
+    # all those that have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $debug_cmd
+
+  if func_cygming_gnu_implib_p "$1"; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1"; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=
+  fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $debug_cmd
+
+    f_ex_an_ar_dir=$1; shift
+    f_ex_an_ar_oldlib=$1
+    if test yes = "$lock_old_archive_extraction"; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test yes = "$lock_old_archive_extraction"; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $debug_cmd
+
+    my_gentop=$1; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=
+    my_xlib=
+    my_xabs=
+    my_xdir=
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib=$func_basename_result
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir=$my_gentop/$my_xlib_u
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  func_basename "$darwin_archive"
+	  darwin_base_archive=$func_basename_result
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches; do
+	      func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+	      cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+	      func_extract_an_archive "`pwd`" "$darwin_base_archive"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+    done
+
+    func_extract_archives_result=$my_oldobjs
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory where it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=${1-no}
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ that is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options that match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+  done
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test yes = "$fast_install"; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	\$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	# Export our shlibpath_var if we have one.
+	if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+      func_exec_program \${1+\"\$@\"}
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+*/
+EOF
+	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* declarations of non-ANSI functions */
+#if defined __MINGW32__
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined __CYGWIN__
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined other_platform || defined ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined _MSC_VER
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+#elif defined __MINGW32__
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined __CYGWIN__
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined other platforms ... */
+#endif
+
+#if defined PATH_MAX
+# define LT_PATHMAX PATH_MAX
+#elif defined MAXPATHLEN
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+  defined __OS2__
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free (stale); stale = 0; } \
+} while (0)
+
+#if defined LT_DEBUGWRAPPER
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+	    cat <<EOF
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_path "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_path "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test yes = "$fast_install"; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  int rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  newargz = XMALLOC (char *, (size_t) argc + 1);
+
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (STREQ (argv[i], dumpscript_opt))
+	{
+EOF
+	    case $host in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  lt_dump_script (stdout);
+	  return 0;
+	}
+      if (STREQ (argv[i], debug_opt))
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (STREQ (argv[i], ltwrapper_option_prefix))
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
+  for (i = 0; i < newargc; i++)
+    {
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
+  rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  size_t tmp_len;
+  char *concat_name;
+
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = (size_t) (q - p);
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (STREQ (str, pat))
+	*str = '\0';
+    }
+  return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    size_t len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      size_t orig_value_len = strlen (orig_value);
+      size_t add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      size_t len = strlen (new_value);
+      while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[--len] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $debug_cmd
+
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+    $debug_cmd
+
+    case " $compile_command " in
+    *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+      suncc_use_cstd_abi=no
+      ;;
+    *)
+      suncc_use_cstd_abi=yes
+      ;;
+    esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $debug_cmd
+
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # what system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll that has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    bindir=
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    os2dllname=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=false
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module=$wl-single_module
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test yes != "$build_libtool_libs" \
+	  && func_fatal_configuration "cannot build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg=$1
+      shift
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	bindir)
+	  bindir=$arg
+	  prev=
+	  continue
+	  ;;
+	dlfiles|dlprefiles)
+	  $preload || {
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=:
+	  }
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test no = "$dlself"; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test dlprefiles = "$prev"; then
+	      dlself=yes
+	    elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test dlfiles = "$prev"; then
+	      func_append dlfiles " $arg"
+	    else
+	      func_append dlprefiles " $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols=$arg
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file '$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex=$arg
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir=$arg
+	  prev=
+	  continue
+	  ;;
+	mllvm)
+	  # Clang does not use LLVM to link, so we can simply discard any
+	  # '-mllvm $arg' options when doing the link step.
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      func_append moreargs " $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		func_source "$arg"
+
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test none = "$pic_object" &&
+		   test none = "$non_pic_object"; then
+		  func_fatal_error "cannot find name of object for '$arg'"
+		fi
+
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir=$func_dirname_result
+
+		if test none != "$pic_object"; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object=$xdir$pic_object
+
+		  if test dlfiles = "$prev"; then
+		    if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+		      func_append dlfiles " $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test dlprefiles = "$prev"; then
+		    # Preload the old-style object.
+		    func_append dlprefiles " $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg=$pic_object
+		fi
+
+		# Non-PIC object.
+		if test none != "$non_pic_object"; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object=$xdir$non_pic_object
+
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test none = "$pic_object"; then
+		    arg=$non_pic_object
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object=$pic_object
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir=$func_dirname_result
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "'$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file '$arg' does not exist"
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	os2dllname)
+	  os2dllname=$arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex=$arg
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release=-$arg
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
+	  esac
+	  if test rpath = "$prev"; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) func_append rpath " $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) func_append xrpath " $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds=$arg
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  func_append weak_libs " $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg=$arg
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "'-allow-undefined' must not be used because it is the default"
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test X-export-symbols = "X$arg"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework)
+	prev=framework
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between '-L' and '$1'"
+	  else
+	    func_fatal_error "need path for '-L' option"
+	  fi
+	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of '$dir'"
+	  dir=$absdir
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
+	*)
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) func_append dllsearchpath ":$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test X-lc = "X$arg" || test X-lm = "X$arg"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    func_append deplibs " System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test X-lc = "X$arg" && continue
+	    ;;
+	  esac
+	elif test X-lc_r = "X$arg"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	func_append deplibs " $arg"
+	continue
+	;;
+
+      -mllvm)
+	prev=mllvm
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
+
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
+	esac
+	continue
+	;;
+
+      -multi_module)
+	single_module=$wl-multi_module
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "'-no-install' is ignored for $host"
+	  func_warning "assuming '-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -os2dllname)
+	prev=os2dllname
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) func_append xrpath " $dir" ;;
+	esac
+	continue
+	;;
+
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -weak)
+        prev=weak
+	continue
+	;;
+
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs=$IFS; IFS=,
+	for flag in $args; do
+	  IFS=$save_ifs
+          func_quote_for_eval "$flag"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
+	done
+	IFS=$save_ifs
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs=$IFS; IFS=,
+	for flag in $args; do
+	  IFS=$save_ifs
+          func_quote_for_eval "$flag"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
+	done
+	IFS=$save_ifs
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # -fstack-protector*   stack protector flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      # -stdlib=*            select c++ std lib with clang
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
+        func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        func_append compiler_flags " $arg"
+        continue
+        ;;
+
+      -Z*)
+        if test os2 = "`expr $host : '.*\(os2\)'`"; then
+          # OS/2 uses -Zxxx to specify OS/2-specific options
+	  compiler_flags="$compiler_flags $arg"
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  case $arg in
+	  -Zlinker | -Zstack)
+	    prev=xcompiler
+	    ;;
+	  esac
+	  continue
+        else
+	  # Otherwise treat like 'Some other compiler flag' below
+	  func_quote_for_eval "$arg"
+	  arg=$func_quote_for_eval_result
+        fi
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+
+      *.$objext)
+	# A standard object.
+	func_append objs " $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  func_source "$arg"
+
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test none = "$pic_object" &&
+	     test none = "$non_pic_object"; then
+	    func_fatal_error "cannot find name of object for '$arg'"
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir=$func_dirname_result
+
+	  test none = "$pic_object" || {
+	    # Prepend the subdirectory the object is found in.
+	    pic_object=$xdir$pic_object
+
+	    if test dlfiles = "$prev"; then
+	      if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+		func_append dlfiles " $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test dlprefiles = "$prev"; then
+	      # Preload the old-style object.
+	      func_append dlprefiles " $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg=$pic_object
+	  }
+
+	  # Non-PIC object.
+	  if test none != "$non_pic_object"; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object=$xdir$non_pic_object
+
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test none = "$pic_object"; then
+	      arg=$non_pic_object
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object=$pic_object
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir=$func_dirname_result
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "'$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	func_resolve_sysroot "$arg"
+	if test dlfiles = "$prev"; then
+	  # This library was specified with -dlopen.
+	  func_append dlfiles " $func_resolve_sysroot_result"
+	  prev=
+	elif test dlprefiles = "$prev"; then
+	  # The library was specified with -dlpreopen.
+	  func_append dlprefiles " $func_resolve_sysroot_result"
+	  prev=
+	else
+	  func_append deplibs " $func_resolve_sysroot_result"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_for_eval "$arg"
+	arg=$func_quote_for_eval_result
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
+
+    test -n "$prev" && \
+      func_fatal_help "the '$prevarg' option requires an argument"
+
+    if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname=$func_basename_result
+    libobjs_save=$libobjs
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    # Definition is injected by LT_CONFIG during libtool generation.
+    func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
+    func_dirname "$output" "/" ""
+    output_objdir=$func_dirname_result$objdir
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_preserve_dup_deps; then
+	case "$libs " in
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	esac
+      fi
+      func_append libs " $deplib"
+    done
+
+    if test lib = "$linkmode"; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+	  esac
+	  func_append pre_post_deps " $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=false
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test lib,link = "$linkmode,$pass"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs=$tmp_deplibs
+      fi
+
+      if test lib,link = "$linkmode,$pass" ||
+	 test prog,scan = "$linkmode,$pass"; then
+	libs=$deplibs
+	deplibs=
+      fi
+      if test prog = "$linkmode"; then
+	case $pass in
+	dlopen) libs=$dlfiles ;;
+	dlpreopen) libs=$dlprefiles ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test lib,dlpreopen = "$linkmode,$pass"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  func_resolve_sysroot "$lib"
+	  case $lib in
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) func_append deplibs " $deplib" ;;
+	    esac
+	  done
+	done
+	libs=$dlprefiles
+      fi
+      if test dlopen = "$pass"; then
+	# Collect dlpreopened libraries
+	save_deplibs=$deplibs
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=false
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	  if test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    func_append compiler_flags " $deplib"
+	    if test lib = "$linkmode"; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test lib != "$linkmode" && test prog != "$linkmode"; then
+	    func_warning "'-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test lib = "$linkmode"; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib=$searchdir/lib$name$search_ext
+	      if test -f "$lib"; then
+		if test .la = "$search_ext"; then
+		  found=:
+		else
+		  found=false
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if $found; then
+	    # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll=$l
+		  done
+		  if test "X$ll" = "X$old_library"; then # only static version available
+		    found=false
+		    func_dirname "$lib" "" "."
+		    ladir=$func_dirname_result
+		    lib=$ladir/$old_library
+		    if test prog,link = "$linkmode,$pass"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  else
+	    # deplib doesn't seem to be a libtool library
+	    if test prog,link = "$linkmode,$pass"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test lib = "$linkmode"; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test conv = "$pass" && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  prog)
+	    if test conv = "$pass"; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test scan = "$pass"; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  *)
+	    func_warning "'-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test link = "$pass"; then
+	    func_stripname '-R' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) func_append xrpath " $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
+	*.$libext)
+	  if test conv = "$pass"; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=false
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=:
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=:
+		;;
+	      esac
+	      if $valid_a_lib; then
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      else
+		echo
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test link != "$pass"; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test conv = "$pass"; then
+	    deplibs="$deplib $deplibs"
+	  elif test prog = "$linkmode"; then
+	    if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      func_append newdlprefiles " $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      func_append newdlfiles " $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=:
+	  continue
+	  ;;
+	esac # case $deplib
+
+	$found || test -f "$lib" \
+	  || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "'$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir=$func_dirname_result
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test lib,link = "$linkmode,$pass" ||
+	   test prog,scan = "$linkmode,$pass" ||
+	   { test prog != "$linkmode" && test lib != "$linkmode"; }; then
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+	fi
+
+	if test conv = "$pass"; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for '$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
+	  elif test prog != "$linkmode" && test lib != "$linkmode"; then
+	    func_fatal_error "'$lib' is not a convenience library"
+	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	if test -n "$old_library" &&
+	   { test yes = "$prefer_static_libs" ||
+	     test built,no = "$prefer_static_libs,$installed"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib=$l
+	  done
+	fi
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for '$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test dlopen = "$pass"; then
+	  test -z "$libdir" \
+	    && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
+	  if test -z "$dlname" ||
+	     test yes != "$dlopen_support" ||
+	     test no = "$build_libtool_libs"
+	  then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    func_append dlprefiles " $lib $dependency_libs"
+	  else
+	    func_append newdlfiles " $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of '$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir=$ladir
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname=$func_basename_result
+
+	# Find the relevant object directory and library name.
+	if test yes = "$installed"; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    func_warning "library '$lib' was moved."
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    libdir=$abs_ladir
+	  else
+	    dir=$lt_sysroot$libdir
+	    absdir=$lt_sysroot$libdir
+	  fi
+	  test yes = "$hardcode_automatic" && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir=$ladir
+	    absdir=$abs_ladir
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  else
+	    dir=$ladir/$objdir
+	    absdir=$abs_ladir/$objdir
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test dlpreopen = "$pass"; then
+	  if test -z "$libdir" && test prog = "$linkmode"; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
+	  fi
+	  case $host in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test lib = "$linkmode"; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test prog,link = "$linkmode,$pass"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test prog = "$linkmode" && test link != "$pass"; then
+	  func_append newlib_search_path " $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=false
+	  if test no != "$link_all_deplibs" || test -z "$library_names" ||
+	     test no = "$build_libtool_libs"; then
+	    linkalldeplibs=:
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if $linkalldeplibs; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test prog,link = "$linkmode,$pass"; then
+	  if test -n "$library_names" &&
+	     { { test no = "$prefer_static_libs" ||
+	         test built,yes = "$prefer_static_libs,$installed"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
+	      # Make sure the rpath contains only unique directories.
+	      case $temp_rpath: in
+	      *"$absdir:"*) ;;
+	      *) func_append temp_rpath "$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if $alldeplibs &&
+	     { test pass_all = "$deplibs_check_method" ||
+	       { test yes = "$build_libtool_libs" &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test built = "$use_static_libs" && test yes = "$installed"; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test no = "$use_static_libs" || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc* | *os2*)
+	      # No point in relinking DLLs because paths are not encoded
+	      func_append notinst_deplibs " $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test no = "$installed"; then
+	      func_append notinst_deplibs " $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule=$dlpremoduletest
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
+	    echo
+	    if test prog = "$linkmode"; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test lib = "$linkmode" &&
+	     test yes = "$hardcode_into_libs"; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname=$1
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname=$dlname
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc* | *os2*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix=-$major
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname=$realname
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot=$soname
+	    func_basename "$soroot"
+	    soname=$func_basename_result
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from '$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for '$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test prog = "$linkmode" || test relink != "$opt_mode"; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test no = "$hardcode_direct"; then
+		add=$dir/$linklib
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+		  *-*-sysv4*uw2*) add_dir=-L$dir ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir=-L$dir ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we cannot
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library"; then
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
+			else
+			  add=$dir/$old_library
+			fi
+		      elif test -n "$old_library"; then
+			add=$dir/$old_library
+		      fi
+		    fi
+		esac
+	      elif test no = "$hardcode_minus_L"; then
+		case $host in
+		*-*-sunos*) add_shlibpath=$dir ;;
+		esac
+		add_dir=-L$dir
+		add=-l$name
+	      elif test no = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test yes = "$hardcode_direct" &&
+	         test no = "$hardcode_direct_absolute"; then
+		add=$dir/$linklib
+	      elif test yes = "$hardcode_minus_L"; then
+		add_dir=-L$absdir
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add=-l$name
+	      elif test yes = "$hardcode_shlibpath_var"; then
+		add_shlibpath=$dir
+		add=-l$name
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test yes != "$lib_linked"; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test prog = "$linkmode"; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test yes != "$hardcode_direct" &&
+		 test yes != "$hardcode_minus_L" &&
+		 test yes = "$hardcode_shlibpath_var"; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test prog = "$linkmode" || test relink = "$opt_mode"; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test yes = "$hardcode_direct" &&
+	       test no = "$hardcode_direct_absolute"; then
+	      add=$libdir/$linklib
+	    elif test yes = "$hardcode_minus_L"; then
+	      add_dir=-L$libdir
+	      add=-l$name
+	    elif test yes = "$hardcode_shlibpath_var"; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
+	      esac
+	      add=-l$name
+	    elif test yes = "$hardcode_automatic"; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib"; then
+		add=$inst_prefix_dir$libdir/$linklib
+	      else
+		add=$libdir/$linklib
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir=-L$libdir
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add=-l$name
+	    fi
+
+	    if test prog = "$linkmode"; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test prog = "$linkmode"; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test unsupported != "$hardcode_direct"; then
+	    test -n "$old_library" && linklib=$old_library
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test yes = "$build_libtool_libs"; then
+	  # Not a shared library
+	  if test pass_all != "$deplibs_check_method"; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    $ECHO "*** Warning: This system cannot link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test yes = "$module"; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** 'nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test no = "$build_old_libs"; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test lib = "$linkmode"; then
+	  if test -n "$dependency_libs" &&
+	     { test yes != "$hardcode_into_libs" ||
+	       test yes = "$build_old_libs" ||
+	       test yes = "$link_static"; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) func_append xrpath " $temp_xrpath";;
+		   esac;;
+	      *) func_append temp_deplibs " $libdir";;
+	      esac
+	    done
+	    dependency_libs=$temp_deplibs
+	  fi
+
+	  func_append newlib_search_path " $absdir"
+	  # Link against this library
+	  test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps; then
+	      case "$tmp_libs " in
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $func_resolve_sysroot_result"
+	  done
+
+	  if test no != "$link_all_deplibs"; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path=$deplib ;;
+	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
+	        func_dirname "$deplib" "" "."
+		dir=$func_dirname_result
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of '$dir'"
+		    absdir=$dir
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names"; then
+		    for tmp in $deplibrary_names; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl"; then
+		      depdepl=$absdir/$objdir/$depdepl
+		      darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`$OTOOL64 -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+		      func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path=-L$absdir/$objdir
+		  ;;
+		esac
+		else
+		  eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "'$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "'$deplib' seems to be moved"
+
+		  path=-L$absdir
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test link = "$pass"; then
+	if test prog = "$linkmode"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs=$newdependency_libs
+      if test dlpreopen = "$pass"; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test dlopen != "$pass"; then
+	test conv = "$pass" || {
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) func_append lib_search_path " $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	}
+
+	if test prog,link = "$linkmode,$pass"; then
+	  vars="compile_deplibs finalize_deplibs"
+	else
+	  vars=deplibs
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) func_append tmp_libs " $deplib" ;;
+	      esac
+	      ;;
+	    *) func_append tmp_libs " $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+
+      # Add Sun CC postdeps if required:
+      test CXX = "$tagname" && {
+        case $host_os in
+        linux*)
+          case `$CC -V 2>&1 | sed 5q` in
+          *Sun\ C*) # Sun C++ 5.9
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+
+        solaris*)
+          func_cc_basename "$CC"
+          case $func_cc_basename_result in
+          CC* | sunCC*)
+            func_suncc_cstd_abi
+
+            if test no != "$suncc_use_cstd_abi"; then
+              func_append postdeps ' -library=Cstd -library=Crun'
+            fi
+            ;;
+          esac
+          ;;
+        esac
+      }
+
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=
+	  ;;
+	esac
+	if test -n "$i"; then
+	  func_append tmp_libs " $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test prog = "$linkmode"; then
+      dlfiles=$newdlfiles
+    fi
+    if test prog = "$linkmode" || test lib = "$linkmode"; then
+      dlprefiles=$newdlprefiles
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "'-l' and '-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "'-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "'-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "'-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "'-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs=$output
+      func_append objs "$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form 'libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test no = "$module" \
+	  && func_fatal_help "libtool library '$output' must begin with 'lib'"
+
+	if test no != "$need_lib_prefix"; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test pass_all != "$deplibs_check_method"; then
+	  func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
+	else
+	  echo
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  func_append libobjs " $objs"
+	fi
+      fi
+
+      test no = "$dlself" \
+	|| func_warning "'-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test 1 -lt "$#" \
+	&& func_warning "ignoring multiple '-rpath's for a libtool library"
+
+      install_libdir=$1
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test yes = "$build_libtool_libs"; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a '.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "'-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "'-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs=$IFS; IFS=:
+	set dummy $vinfo 0 0 0
+	shift
+	IFS=$save_ifs
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to '-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major=$1
+	  number_minor=$2
+	  number_revision=$3
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # that has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
+	  darwin|freebsd-elf|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age=$number_minor
+	    revision=$number_revision
+	    ;;
+	  freebsd-aout|qnx|sunos)
+	    current=$number_major
+	    revision=$number_minor
+	    age=0
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age=$number_minor
+	    revision=$number_minor
+	    lt_irix_increment=no
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current=$1
+	  revision=$2
+	  age=$3
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT '$current' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION '$revision' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE '$age' must be a nonnegative integer"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE '$age' is greater than the current interface number '$current'"
+	  func_fatal_error "'$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+          # On Darwin other compilers
+          case $CC in
+              nagfor*)
+                  verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+                  ;;
+              *)
+                  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+                  ;;
+          esac
+	  ;;
+
+	freebsd-aout)
+	  major=.$current
+	  versuffix=.$current.$revision
+	  ;;
+
+	freebsd-elf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  ;;
+
+	irix | nonstopux)
+	  if test no = "$lt_irix_increment"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring=$verstring_prefix$major.$revision
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test 0 -ne "$loop"; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring=$verstring_prefix$major.$iface:$verstring
+	  done
+
+	  # Before this point, $major must not contain '.'.
+	  major=.$major
+	  versuffix=$major.$revision
+	  ;;
+
+	linux) # correct to gnu/linux during the next big refactor
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=$major.$age.$revision
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=.$current.$age.$revision
+	  verstring=$current.$age.$revision
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test 0 -ne "$loop"; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring=$verstring:$iface.0
+	  done
+
+	  # Make executables depend on our current version.
+	  func_append verstring ":$current.0"
+	  ;;
+
+	qnx)
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sco)
+	  major=.$current
+	  versuffix=.$current
+	  ;;
+
+	sunos)
+	  major=.$current
+	  versuffix=.$current.$revision
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 file systems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix=-$major
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type '$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring=0.0
+	    ;;
+	  esac
+	  if test no = "$need_version"; then
+	    versuffix=
+	  else
+	    versuffix=.0.0
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test yes,no = "$avoid_version,$need_version"; then
+	  major=
+	  versuffix=
+	  verstring=
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test yes = "$allow_undefined"; then
+	  if test unsupported = "$allow_undefined_flag"; then
+	    if test yes = "$build_old_libs"; then
+	      func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+	      build_libtool_libs=no
+	    else
+	      func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+	    fi
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag=$no_undefined_flag
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" :
+      func_append libobjs " $symfileobj"
+      test " " = "$libobjs" && libobjs=
+
+      if test relink != "$opt_mode"; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+	       if test -n "$precious_files_regex"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       func_append removelist " $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
+	func_append oldlibs " $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+	if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles=$dlfiles
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) func_append dlfiles " $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles=$dlprefiles
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) func_append dlprefiles " $lib" ;;
+	esac
+      done
+
+      if test yes = "$build_libtool_libs"; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    func_append deplibs " System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test yes = "$build_libtool_need_lc"; then
+	      func_append deplibs " -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=
+	versuffix=
+	major=
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    func_append newdeplibs " $i"
+		    i=
+		    ;;
+		  esac
+		fi
+		if test -n "$i"; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		    func_append newdeplibs " $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      func_append newdeplibs " $i"
+		      i=
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i"; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+		      func_append newdeplibs " $i"
+		    else
+		      droppeddeps=yes
+		      echo
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib"; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  if test yes = "$want_nocaseglob"; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib=$potent_lib
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+			*) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			func_append newdeplibs " $a_deplib"
+			a_deplib=
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib"; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib"; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib"; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib=$potent_lib # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      func_append newdeplibs " $a_deplib"
+		      a_deplib=
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib"; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib"; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+	    for i in $predeps $postdeps; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
+	    done
+	  fi
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
+	    if test none = "$deplibs_check_method"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	    ;;
+	  esac
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test yes = "$droppeddeps"; then
+	  if test yes = "$module"; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** 'nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test no = "$build_old_libs"; then
+	      oldlibs=$output_objdir/$libname.$libext
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test no = "$allow_undefined"; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test no = "$build_old_libs"; then
+		oldlibs=$output_objdir/$libname.$libext
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      deplibs=$new_libs
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test yes = "$build_libtool_libs"; then
+	# Remove $wl instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
+	if test yes = "$hardcode_into_libs"; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath=$finalize_rpath
+	  test relink = "$opt_mode" || rpath=$compile_rpath$rpath
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs=$libdir
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		func_append dep_rpath " $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append perm_rpath " $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir=$hardcode_libdirs
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      func_append rpath "$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath=$finalize_shlibpath
+	test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname=$1
+	shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname=$realname
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib=$output_objdir/$realname
+	linknames=
+	for link
+	do
+	  func_append linknames " $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols=$output_objdir/$libname.uexp
+	  func_append delfiles " $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    func_dll_def_p "$export_symbols" || {
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols=$export_symbols
+	      export_symbols=
+	      always_export_symbols=yes
+	    }
+	  fi
+	  ;;
+	esac
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for '$libname.la'"
+	    export_symbols=$output_objdir/$libname.exp
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs=$IFS; IFS='~'
+	    for cmd1 in $cmds; do
+	      IFS=$save_ifs
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test yes = "$try_normal_branch" \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=$output_objdir/$output_la.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS=$save_ifs
+	    if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols=$export_symbols
+	  test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands, which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    func_append tmp_deplibs " $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs=$tmp_deplibs
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test yes = "$compiler_needs_object" &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop=$output_objdir/${outputname}x
+	    func_append generated " $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    func_append libobjs " $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	fi
+
+	if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  func_append linker_flags " $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test relink = "$opt_mode"; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test yes = "$module" && test -n "$module_cmds"; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
+	fi
+
+	if test : != "$skipped_export" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  func_basename "$output"
+	  output_la=$func_basename_result
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+	    output=$output_objdir/$output_la.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    echo 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
+	  elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+	    output=$output_objdir/$output_la.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test yes = "$compiler_needs_object"; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-$k.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test -z "$objlist" ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test 1 -eq "$k"; then
+		    # The first file doesn't have a previous command to add.
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-$k.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-$k.$objext
+		  objlist=" $obj"
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\$concat_cmds$reload_cmds\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	      func_append delfiles " $output"
+
+	    else
+	      output=
+	    fi
+
+	    ${skipped_export-false} && {
+	      func_verbose "generating symbol list for '$libname.la'"
+	      export_symbols=$output_objdir/$libname.exp
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    }
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs=$IFS; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS=$save_ifs
+	      $opt_quiet || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test relink = "$opt_mode"; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS=$save_ifs
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          ${skipped_export-false} && {
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols=$export_symbols
+	      test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands, which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  }
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test yes = "$module" && test -n "$module_cmds"; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
+	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append libobjs " $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
+
+	save_ifs=$IFS; IFS='~'
+	for cmd in $cmds; do
+	  IFS=$sp$nl
+	  eval cmd=\"$cmd\"
+	  IFS=$save_ifs
+	  $opt_quiet || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test relink = "$opt_mode"; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS=$save_ifs
+
+	# Restore the uninstalled library and exit
+	if test relink = "$opt_mode"; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test yes = "$module" || test yes = "$export_dynamic"; then
+	  # On all known operating systems, these are identical.
+	  dlname=$soname
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+	func_warning "'-dlopen' is ignored for objects"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "'-l' and '-L' are ignored for objects" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "'-rpath' is ignored for objects"
+
+      test -n "$xrpath" && \
+	func_warning "'-R' is ignored for objects"
+
+      test -n "$vinfo" && \
+	func_warning "'-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object '$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj=$output
+	;;
+      esac
+
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # if reload_cmds runs $LD directly, get rid of -Wl from
+      # whole_archive_flag_spec and hope we can get by with turning comma
+      # into space.
+      case $reload_cmds in
+        *\$LD[\ \$]*) wl= ;;
+      esac
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
+	else
+	  gentop=$output_objdir/${obj}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # If we're not building shared, we need to use non_pic_objs
+      test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
+
+      # Create the old-style object.
+      reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
+
+      output=$obj
+      func_execute_cmds "$reload_cmds" 'exit $?'
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      test yes = "$build_libtool_libs" || {
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      }
+
+      if test -n "$pic_flag" || test default != "$pic_mode"; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output=$libobj
+	func_execute_cmds "$reload_cmds" 'exit $?'
+      fi
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "'-version-info' is ignored for programs"
+
+      test -n "$release" && \
+	func_warning "'-release' is ignored for programs"
+
+      $preload \
+	&& test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+	&& func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	;;
+      esac
+
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test CXX = "$tagname"; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      func_append compile_command " $wl-bind_at_load"
+	      func_append finalize_command " $wl-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      compile_deplibs=$new_libs
+
+
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs=$libdir
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append perm_rpath " $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) func_append dllsearchpath ":$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir=$hardcode_libdirs
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath=$rpath
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs=$libdir
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir=$hardcode_libdirs
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath=$rpath
+
+      if test -n "$libobjs" && test yes = "$build_old_libs"; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+      fi
+
+      func_generate_dlsyms "$outputname" "@PROGRAM@" false
+
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
+
+      wrappers_required=:
+      case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=false
+        ;;
+      *cygwin* | *mingw* )
+        test yes = "$build_libtool_libs" || wrappers_required=false
+        ;;
+      *)
+        if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+          wrappers_required=false
+        fi
+        ;;
+      esac
+      $wrappers_required || {
+	# Replace the output file specification.
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command=$compile_command$compile_rpath
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.$objext"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
+	fi
+
+	exit $exit_status
+      }
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test yes = "$no_install"; then
+	# We don't need to create a wrapper script.
+	link_command=$compile_var$compile_command$compile_rpath
+	# Replace the output file specification.
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      case $hardcode_action,$fast_install in
+        relink,*)
+	  # Fast installation is not supported
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+
+	  func_warning "this platform does not like uninstalled shared libraries"
+	  func_warning "'$output' will be relinked during installation"
+	  ;;
+        *,yes)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+          ;;
+	*,no)
+	  link_command=$compile_var$compile_command$compile_rpath
+	  relink_command=$finalize_var$finalize_command$finalize_rpath
+          ;;
+	*,needless)
+	  link_command=$finalize_var$compile_command$finalize_rpath
+	  relink_command=
+          ;;
+      esac
+
+      # Replace the output file specification.
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      func_show_eval "$link_command" 'exit $?'
+
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
+      # Now create the wrapper script.
+      func_verbose "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource=$output_path/$objdir/lt-$output_name.c
+	    cwrapper=$output_path/$output_name.exe
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
+
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host"; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      case $build_libtool_libs in
+        convenience)
+	  oldobjs="$libobjs_save $symfileobj"
+	  addlibs=$convenience
+	  build_libtool_libs=no
+	  ;;
+	module)
+	  oldobjs=$libobjs_save
+	  addlibs=$old_convenience
+	  build_libtool_libs=no
+          ;;
+	*)
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  $preload && test -f "$symfileobj" \
+	    && func_append oldobjs " $symfileobj"
+	  addlibs=$old_convenience
+	  ;;
+      esac
+
+      if test -n "$addlibs"; then
+	gentop=$output_objdir/${outputname}x
+	func_append generated " $gentop"
+
+	func_extract_archives $gentop $addlibs
+	func_append oldobjs " $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
+	cmds=$old_archive_from_new_cmds
+      else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append oldobjs " $func_extract_archives_result"
+	fi
+
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  echo "copying selected object files to avoid basename conflicts..."
+	  gentop=$output_objdir/${outputname}x
+	  func_append generated " $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase=$func_basename_result
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
+	      ;;
+	    *) func_append oldobjs " $obj" ;;
+	    esac
+	  done
+	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
+	eval cmds=\"$old_archive_cmds\"
+
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj"; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test -z "$oldobjs"; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
+    done
+
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test yes = "$build_old_libs" && old_library=$libname.$libext
+      func_verbose "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      if test yes = "$hardcode_automatic"; then
+	relink_command=
+      fi
+
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test yes = "$installed"; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output=$output_objdir/${outputname}i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name=$func_basename_result
+		func_resolve_sysroot "$deplib"
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		test -z "$libdir" && \
+		  func_fatal_error "'$deplib' is not a valid libtool archive"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
+	      esac
+	    done
+	    dependency_libs=$newdependency_libs
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "'$lib' is not a valid libtool archive"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      *) func_append newdlfiles " $lib" ;;
+	      esac
+	    done
+	    dlfiles=$newdlfiles
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name=$func_basename_result
+		eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "'$lib' is not a valid libtool archive"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles=$newdlprefiles
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlfiles " $abs"
+	    done
+	    dlfiles=$newdlfiles
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlprefiles " $abs"
+	    done
+	    dlprefiles=$newdlprefiles
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test -n "$bindir"; then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result/$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that cannot go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test no,yes = "$installed,$need_relink"; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
+
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+  func_mode_link ${1+"$@"}
+fi
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $debug_cmd
+
+    RM=$nonopt
+    files=
+    rmforce=false
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic=$magic
+
+    for arg
+    do
+      case $arg in
+      -f) func_append RM " $arg"; rmforce=: ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
+      esac
+    done
+
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
+
+    rmdirs=
+
+    for file in $files; do
+      func_dirname "$file" "" "."
+      dir=$func_dirname_result
+      if test . = "$dir"; then
+	odir=$objdir
+      else
+	odir=$dir/$objdir
+      fi
+      func_basename "$file"
+      name=$func_basename_result
+      test uninstall = "$opt_mode" && odir=$dir
+
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test clean = "$opt_mode"; then
+	case " $rmdirs " in
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif $rmforce; then
+	continue
+      fi
+
+      rmfiles=$file
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    func_append rmfiles " $odir/$n"
+	  done
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+	  case $opt_mode in
+	  clean)
+	    case " $library_names " in
+	    *" $dlname "*) ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+	    esac
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if func_lalib_p "$file"; then
+
+	  # Read the .lo file
+	  func_source $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" && test none != "$pic_object"; then
+	    func_append rmfiles " $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" && test none != "$non_pic_object"; then
+	    func_append rmfiles " $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test clean = "$opt_mode"; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    func_append rmfiles " $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+	    if test yes = "$fast_install" && test -n "$relink_command"; then
+	      func_append rmfiles " $odir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name"; then
+	      func_append rmfiles " $odir/lt-$noexename.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
+    done
+
+    # Try to remove the $objdir's in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
+      fi
+    done
+
+    exit $exit_status
+}
+
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+  func_mode_uninstall ${1+"$@"}
+fi
+
+test -z "$opt_mode" && {
+  help=$generic_help
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode '$opt_mode'"
+
+if test -n "$exec_cmd"; then
+  eval exec "$exec_cmd"
+  exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# where we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD="/usr/bin/ld -m elf_x86_64"
+
+# How to create reloadable object files.
+reload_flag=" -r"
+reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
+
+# Commands used to build an old-style archive.
+old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs~\$RANLIB \$tool_oldlib"
+
+# A language specific compiler.
+CC="g++"
+
+# Is the compiler the GNU compiler?
+with_gcc=yes
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=" -fno-builtin"
+
+# Additional compiler flags for building library objects.
+pic_flag=" -fPIC -DPIC"
+
+# How to pass a linker flag through the compiler.
+wl="-Wl,"
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag="-static"
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o="yes"
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=no
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=no
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec="\$wl--export-dynamic"
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec="\$wl--whole-archive\$convenience \$wl--no-whole-archive"
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object="no"
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=""
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=""
+
+# Commands used to build a shared archive.
+archive_cmds="\$CC \$pic_flag -shared -nostdlib \$predep_objects \$libobjs \$deplibs \$postdep_objects \$compiler_flags \$wl-soname \$wl\$soname -o \$lib"
+archive_expsym_cmds="\$CC \$pic_flag -shared -nostdlib \$predep_objects \$libobjs \$deplibs \$postdep_objects \$compiler_flags \$wl-soname \$wl\$soname \$wl-retain-symbols-file \$wl\$export_symbols -o \$lib"
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=""
+module_expsym_cmds=""
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld="yes"
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=""
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=""
+
+# Flag to hardcode $libdir into a binary during linking.
+# This must work even if $libdir does not exist
+hardcode_libdir_flag_spec="\$wl-rpath \$wl\$libdir"
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=""
+
+# Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=no
+
+# Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting $shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=no
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=no
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=unsupported
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=no
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=no
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=unknown
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=no
+
+# The commands to list exported symbols.
+export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | \$SED 's/.* //' | sort | uniq > \$export_symbols"
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms="_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*"
+
+# Symbols that must always be exported.
+include_expsyms=""
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=""
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=""
+
+# Specify filename containing input files.
+file_list_spec=""
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=immediate
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs="/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0 /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/../../../../lib /lib/../lib /usr/lib/../lib /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/../../.."
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects="/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/../../../../lib/crti.o /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/crtbeginS.o"
+postdep_objects="/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/crtendS.o /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/../../../../lib/crtn.o"
+predeps=""
+postdeps="-lstdc++ -lm -lgcc_s -lc -lgcc_s"
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path="-L/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0 -L/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/../../../../lib -L/lib/../lib -L/usr/lib/../lib -L/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/../../.."
+
+# ### END LIBTOOL TAG CONFIG: CXX
diff -Naurp dpkg-1.20.7.1-orig/m4/gettext.m4 dpkg-1.20.7.1/m4/gettext.m4
--- dpkg-1.20.7.1-orig/m4/gettext.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/gettext.m4	2021-06-09 18:22:47.470275393 -0500
@@ -0,0 +1,386 @@
+# gettext.m4 serial 70 (gettext-0.20)
+dnl Copyright (C) 1995-2014, 2016, 2018 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2006, 2008-2010.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL must be one of 'external', 'use-libtool'.
+dnl    INTLSYMBOL should be 'external' for packages other than GNU gettext, and
+dnl    'use-libtool' for the packages 'gettext-runtime' and 'gettext-tools'.
+dnl    If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl    $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl    depending on --{enable,disable}-{shared,static} and on the presence of
+dnl    AM-DISABLE-SHARED).
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl    implementations (in libc or libintl) without the ngettext() function
+dnl    will be ignored.  If NEEDSYMBOL is specified and is
+dnl    'need-formatstring-macros', then GNU gettext implementations that don't
+dnl    support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries.  If empty,
+dnl    the value '$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl    and used.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl    Catalog format: GNU --> install in $(datadir)
+dnl    Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl    Catalog format: none
+dnl    Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+  dnl Argument checking.
+  ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [use-libtool], ,
+    [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])
+  ifelse(ifelse([$1], [], [old])[]ifelse([$1], [no-libtool], [old]), [old],
+    [errprint([ERROR: Use of AM_GNU_GETTEXT without [external] argument is no longer supported.
+])])
+  ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+    [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+  define([gt_included_intl],
+    ifelse([$1], [external], [no], [yes]))
+  gt_NEEDS_INIT
+  AM_GNU_GETTEXT_NEED([$2])
+
+  AC_REQUIRE([AM_PO_SUBDIRS])dnl
+  ifelse(gt_included_intl, yes, [
+    AC_REQUIRE([AM_INTL_SUBDIR])dnl
+  ])
+
+  dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+
+  dnl Sometimes libintl requires libiconv, so first search for libiconv.
+  dnl Ideally we would do this search only after the
+  dnl      if test "$USE_NLS" = "yes"; then
+  dnl        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+  dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+  dnl the configure script would need to contain the same shell code
+  dnl again, outside any 'if'. There are two solutions:
+  dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+  dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+  dnl Since AC_PROVIDE_IFELSE is not documented, we avoid it.
+  ifelse(gt_included_intl, yes, , [
+    AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+  ])
+
+  dnl Sometimes, on Mac OS X, libintl requires linking with CoreFoundation.
+  gt_INTL_MACOSX
+
+  dnl Set USE_NLS.
+  AC_REQUIRE([AM_NLS])
+
+  ifelse(gt_included_intl, yes, [
+    BUILD_INCLUDED_LIBINTL=no
+    USE_INCLUDED_LIBINTL=no
+  ])
+  LIBINTL=
+  LTLIBINTL=
+  POSUB=
+
+  dnl Add a version number to the cache macros.
+  case " $gt_needs " in
+    *" need-formatstring-macros "*) gt_api_version=3 ;;
+    *" need-ngettext "*) gt_api_version=2 ;;
+    *) gt_api_version=1 ;;
+  esac
+  gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+  gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+  dnl If we use NLS figure out what method
+  if test "$USE_NLS" = "yes"; then
+    gt_use_preinstalled_gnugettext=no
+    ifelse(gt_included_intl, yes, [
+      AC_MSG_CHECKING([whether included gettext is requested])
+      AC_ARG_WITH([included-gettext],
+        [  --with-included-gettext use the GNU gettext library included here],
+        nls_cv_force_use_gnu_gettext=$withval,
+        nls_cv_force_use_gnu_gettext=no)
+      AC_MSG_RESULT([$nls_cv_force_use_gnu_gettext])
+
+      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+    ])
+        dnl User does not insist on using GNU NLS library.  Figure out what
+        dnl to use.  If GNU gettext is available we use this.  Else we have
+        dnl to fall back to GNU NLS library.
+
+        if test $gt_api_version -ge 3; then
+          gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+'
+        else
+          gt_revision_test_code=
+        fi
+        if test $gt_api_version -ge 2; then
+          gt_expression_test_code=' + * ngettext ("", "", 0)'
+        else
+          gt_expression_test_code=
+        fi
+
+        AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
+         [AC_LINK_IFELSE(
+            [AC_LANG_PROGRAM(
+               [[
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_domain_bindings)
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+               ]],
+               [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+               ]])],
+            [eval "$gt_func_gnugettext_libc=yes"],
+            [eval "$gt_func_gnugettext_libc=no"])])
+
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+          dnl Sometimes libintl requires libiconv, so first search for libiconv.
+          ifelse(gt_included_intl, yes, , [
+            AM_ICONV_LINK
+          ])
+          dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+          dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+          dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+          dnl even if libiconv doesn't exist.
+          AC_LIB_LINKFLAGS_BODY([intl])
+          AC_CACHE_CHECK([for GNU gettext in libintl],
+            [$gt_func_gnugettext_libintl],
+           [gt_save_CPPFLAGS="$CPPFLAGS"
+            CPPFLAGS="$CPPFLAGS $INCINTL"
+            gt_save_LIBS="$LIBS"
+            LIBS="$LIBS $LIBINTL"
+            dnl Now see whether libintl exists and does not depend on libiconv.
+            AC_LINK_IFELSE(
+              [AC_LANG_PROGRAM(
+                 [[
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+                 ]],
+                 [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+                 ]])],
+              [eval "$gt_func_gnugettext_libintl=yes"],
+              [eval "$gt_func_gnugettext_libintl=no"])
+            dnl Now see whether libintl exists and depends on libiconv.
+            if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+              LIBS="$LIBS $LIBICONV"
+              AC_LINK_IFELSE(
+                [AC_LANG_PROGRAM(
+                   [[
+#include <libintl.h>
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION (_nl_msg_cat_cntr + *_nl_expand_alias (""))
+#else
+#define __GNU_GETTEXT_SYMBOL_EXPRESSION 0
+#endif
+$gt_revision_test_code
+                   ]],
+                   [[
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + __GNU_GETTEXT_SYMBOL_EXPRESSION
+                   ]])],
+                [LIBINTL="$LIBINTL $LIBICONV"
+                 LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+                 eval "$gt_func_gnugettext_libintl=yes"
+                ])
+            fi
+            CPPFLAGS="$gt_save_CPPFLAGS"
+            LIBS="$gt_save_LIBS"])
+        fi
+
+        dnl If an already present or preinstalled GNU gettext() is found,
+        dnl use it.  But if this macro is used in GNU gettext, and GNU
+        dnl gettext is already preinstalled in libintl, we update this
+        dnl libintl.  (Cf. the install rule in intl/Makefile.in.)
+        if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+           || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+                && test "$PACKAGE" != gettext-runtime \
+                && test "$PACKAGE" != gettext-tools; }; then
+          gt_use_preinstalled_gnugettext=yes
+        else
+          dnl Reset the values set by searching for libintl.
+          LIBINTL=
+          LTLIBINTL=
+          INCINTL=
+        fi
+
+    ifelse(gt_included_intl, yes, [
+        if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+          dnl GNU gettext is not found in the C library.
+          dnl Fall back on included GNU gettext library.
+          nls_cv_use_gnu_gettext=yes
+        fi
+      fi
+
+      if test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions used to generate GNU NLS library.
+        BUILD_INCLUDED_LIBINTL=yes
+        USE_INCLUDED_LIBINTL=yes
+        LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.la $LIBICONV $LIBTHREAD"
+        LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.la $LTLIBICONV $LTLIBTHREAD"
+        LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+      fi
+
+      CATOBJEXT=
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Mark actions to use GNU gettext tools.
+        CATOBJEXT=.gmo
+      fi
+    ])
+
+    if test -n "$INTL_MACOSX_LIBS"; then
+      if test "$gt_use_preinstalled_gnugettext" = "yes" \
+         || test "$nls_cv_use_gnu_gettext" = "yes"; then
+        dnl Some extra flags are needed during linking.
+        LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+        LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+      fi
+    fi
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes" \
+       || test "$nls_cv_use_gnu_gettext" = "yes"; then
+      AC_DEFINE([ENABLE_NLS], [1],
+        [Define to 1 if translation of program messages to the user's native language
+   is requested.])
+    else
+      USE_NLS=no
+    fi
+  fi
+
+  AC_MSG_CHECKING([whether to use NLS])
+  AC_MSG_RESULT([$USE_NLS])
+  if test "$USE_NLS" = "yes"; then
+    AC_MSG_CHECKING([where the gettext function comes from])
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        gt_source="external libintl"
+      else
+        gt_source="libc"
+      fi
+    else
+      gt_source="included intl directory"
+    fi
+    AC_MSG_RESULT([$gt_source])
+  fi
+
+  if test "$USE_NLS" = "yes"; then
+
+    if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+      if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+        AC_MSG_CHECKING([how to link with libintl])
+        AC_MSG_RESULT([$LIBINTL])
+        AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+      fi
+
+      dnl For backward compatibility. Some packages may be using this.
+      AC_DEFINE([HAVE_GETTEXT], [1],
+       [Define if the GNU gettext() function is already present or preinstalled.])
+      AC_DEFINE([HAVE_DCGETTEXT], [1],
+       [Define if the GNU dcgettext() function is already present or preinstalled.])
+    fi
+
+    dnl We need to process the po/ directory.
+    POSUB=po
+  fi
+
+  ifelse(gt_included_intl, yes, [
+    dnl In GNU gettext we have to set BUILD_INCLUDED_LIBINTL to 'yes'
+    dnl because some of the testsuite requires it.
+    BUILD_INCLUDED_LIBINTL=yes
+
+    dnl Make all variables we use known to autoconf.
+    AC_SUBST([BUILD_INCLUDED_LIBINTL])
+    AC_SUBST([USE_INCLUDED_LIBINTL])
+    AC_SUBST([CATOBJEXT])
+  ])
+
+  dnl For backward compatibility. Some Makefiles may be using this.
+  INTLLIBS="$LIBINTL"
+  AC_SUBST([INTLLIBS])
+
+  dnl Make all documented variables known to autoconf.
+  AC_SUBST([LIBINTL])
+  AC_SUBST([LTLIBINTL])
+  AC_SUBST([POSUB])
+])
+
+
+dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
+m4_define([gt_NEEDS_INIT],
+[
+  m4_divert_text([DEFAULTS], [gt_needs=])
+  m4_define([gt_NEEDS_INIT], [])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
+AC_DEFUN([AM_GNU_GETTEXT_NEED],
+[
+  m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
+
+
+dnl Usage: AM_GNU_GETTEXT_REQUIRE_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_REQUIRE_VERSION], [])
diff -Naurp dpkg-1.20.7.1-orig/m4/host-cpu-c-abi.m4 dpkg-1.20.7.1/m4/host-cpu-c-abi.m4
--- dpkg-1.20.7.1-orig/m4/host-cpu-c-abi.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/host-cpu-c-abi.m4	2021-06-09 18:22:47.470275393 -0500
@@ -0,0 +1,644 @@
+# host-cpu-c-abi.m4 serial 11
+dnl Copyright (C) 2002-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible and Sam Steingold.
+
+dnl Sets the HOST_CPU variable to the canonical name of the CPU.
+dnl Sets the HOST_CPU_C_ABI variable to the canonical name of the CPU with its
+dnl C language ABI (application binary interface).
+dnl Also defines __${HOST_CPU}__ and __${HOST_CPU_C_ABI}__ as C macros in
+dnl config.h.
+dnl
+dnl This canonical name can be used to select a particular assembly language
+dnl source file that will interoperate with C code on the given host.
+dnl
+dnl For example:
+dnl * 'i386' and 'sparc' are different canonical names, because code for i386
+dnl   will not run on SPARC CPUs and vice versa. They have different
+dnl   instruction sets.
+dnl * 'sparc' and 'sparc64' are different canonical names, because code for
+dnl   'sparc' and code for 'sparc64' cannot be linked together: 'sparc' code
+dnl   contains 32-bit instructions, whereas 'sparc64' code contains 64-bit
+dnl   instructions. A process on a SPARC CPU can be in 32-bit mode or in 64-bit
+dnl   mode, but not both.
+dnl * 'mips' and 'mipsn32' are different canonical names, because they use
+dnl   different argument passing and return conventions for C functions, and
+dnl   although the instruction set of 'mips' is a large subset of the
+dnl   instruction set of 'mipsn32'.
+dnl * 'mipsn32' and 'mips64' are different canonical names, because they use
+dnl   different sizes for the C types like 'int' and 'void *', and although
+dnl   the instruction sets of 'mipsn32' and 'mips64' are the same.
+dnl * The same canonical name is used for different endiannesses. You can
+dnl   determine the endianness through preprocessor symbols:
+dnl   - 'arm': test __ARMEL__.
+dnl   - 'mips', 'mipsn32', 'mips64': test _MIPSEB vs. _MIPSEL.
+dnl   - 'powerpc64': test _BIG_ENDIAN vs. _LITTLE_ENDIAN.
+dnl * The same name 'i386' is used for CPUs of type i386, i486, i586
+dnl   (Pentium), AMD K7, Pentium II, Pentium IV, etc., because
+dnl   - Instructions that do not exist on all of these CPUs (cmpxchg,
+dnl     MMX, SSE, SSE2, 3DNow! etc.) are not frequently used. If your
+dnl     assembly language source files use such instructions, you will
+dnl     need to make the distinction.
+dnl   - Speed of execution of the common instruction set is reasonable across
+dnl     the entire family of CPUs. If you have assembly language source files
+dnl     that are optimized for particular CPU types (like GNU gmp has), you
+dnl     will need to make the distinction.
+dnl   See <https://en.wikipedia.org/wiki/X86_instruction_listings>.
+AC_DEFUN([gl_HOST_CPU_C_ABI],
+[
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_REQUIRE([gl_C_ASM])
+  AC_CACHE_CHECK([host CPU and C ABI], [gl_cv_host_cpu_c_abi],
+    [case "$host_cpu" in
+
+changequote(,)dnl
+       i[4567]86 )
+changequote([,])dnl
+         gl_cv_host_cpu_c_abi=i386
+         ;;
+
+       x86_64 )
+         # On x86_64 systems, the C compiler may be generating code in one of
+         # these ABIs:
+         # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64.
+         # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64
+         #   with native Windows (mingw, MSVC).
+         # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32.
+         # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if (defined __x86_64__ || defined __amd64__ \
+                     || defined _M_X64 || defined _M_AMD64)
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [AC_COMPILE_IFELSE(
+              [AC_LANG_SOURCE(
+                 [[#if defined __ILP32__ || defined _ILP32
+                    int ok;
+                   #else
+                    error fail
+                   #endif
+                 ]])],
+              [gl_cv_host_cpu_c_abi=x86_64-x32],
+              [gl_cv_host_cpu_c_abi=x86_64])],
+           [gl_cv_host_cpu_c_abi=i386])
+         ;;
+
+changequote(,)dnl
+       alphaev[4-8] | alphaev56 | alphapca5[67] | alphaev6[78] )
+changequote([,])dnl
+         gl_cv_host_cpu_c_abi=alpha
+         ;;
+
+       arm* | aarch64 )
+         # Assume arm with EABI.
+         # On arm64 systems, the C compiler may be generating code in one of
+         # these ABIs:
+         # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64.
+         # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32.
+         # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#ifdef __aarch64__
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [AC_COMPILE_IFELSE(
+              [AC_LANG_SOURCE(
+                [[#if defined __ILP32__ || defined _ILP32
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+              [gl_cv_host_cpu_c_abi=arm64-ilp32],
+              [gl_cv_host_cpu_c_abi=arm64])],
+           [# Don't distinguish little-endian and big-endian arm, since they
+            # don't require different machine code for simple operations and
+            # since the user can distinguish them through the preprocessor
+            # defines __ARMEL__ vs. __ARMEB__.
+            # But distinguish arm which passes floating-point arguments and
+            # return values in integer registers (r0, r1, ...) - this is
+            # gcc -mfloat-abi=soft or gcc -mfloat-abi=softfp - from arm which
+            # passes them in float registers (s0, s1, ...) and double registers
+            # (d0, d1, ...) - this is gcc -mfloat-abi=hard. GCC 4.6 or newer
+            # sets the preprocessor defines __ARM_PCS (for the first case) and
+            # __ARM_PCS_VFP (for the second case), but older GCC does not.
+            echo 'double ddd; void func (double dd) { ddd = dd; }' > conftest.c
+            # Look for a reference to the register d0 in the .s file.
+            AC_TRY_COMMAND(${CC-cc} $CFLAGS $CPPFLAGS $gl_c_asm_opt conftest.c) >/dev/null 2>&1
+            if LC_ALL=C grep 'd0,' conftest.$gl_asmext >/dev/null; then
+              gl_cv_host_cpu_c_abi=armhf
+            else
+              gl_cv_host_cpu_c_abi=arm
+            fi
+            rm -f conftest*
+           ])
+         ;;
+
+       hppa1.0 | hppa1.1 | hppa2.0* | hppa64 )
+         # On hppa, the C compiler may be generating 32-bit code or 64-bit
+         # code. In the latter case, it defines _LP64 and __LP64__.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#ifdef __LP64__
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [gl_cv_host_cpu_c_abi=hppa64],
+           [gl_cv_host_cpu_c_abi=hppa])
+         ;;
+
+       ia64* )
+         # On ia64 on HP-UX, the C compiler may be generating 64-bit code or
+         # 32-bit code. In the latter case, it defines _ILP32.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#ifdef _ILP32
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [gl_cv_host_cpu_c_abi=ia64-ilp32],
+           [gl_cv_host_cpu_c_abi=ia64])
+         ;;
+
+       mips* )
+         # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this
+         # at 32.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64)
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [gl_cv_host_cpu_c_abi=mips64],
+           [# In the n32 ABI, _ABIN32 is defined, _ABIO32 is not defined (but
+            # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIN32.
+            # In the 32 ABI, _ABIO32 is defined, _ABIN32 is not defined (but
+            # may later get defined by <sgidefs.h>), and _MIPS_SIM == _ABIO32.
+            AC_COMPILE_IFELSE(
+              [AC_LANG_SOURCE(
+                 [[#if (_MIPS_SIM == _ABIN32)
+                    int ok;
+                   #else
+                    error fail
+                   #endif
+                 ]])],
+              [gl_cv_host_cpu_c_abi=mipsn32],
+              [gl_cv_host_cpu_c_abi=mips])])
+         ;;
+
+       powerpc* )
+         # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD.
+         # No need to distinguish them here; the caller may distinguish
+         # them based on the OS.
+         # On powerpc64 systems, the C compiler may still be generating
+         # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may
+         # be generating 64-bit code.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined __powerpc64__ || defined _ARCH_PPC64
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [# On powerpc64, there are two ABIs on Linux: The AIX compatible
+            # one and the ELFv2 one. The latter defines _CALL_ELF=2.
+            AC_COMPILE_IFELSE(
+              [AC_LANG_SOURCE(
+                 [[#if defined _CALL_ELF && _CALL_ELF == 2
+                    int ok;
+                   #else
+                    error fail
+                   #endif
+                 ]])],
+              [gl_cv_host_cpu_c_abi=powerpc64-elfv2],
+              [gl_cv_host_cpu_c_abi=powerpc64])
+           ],
+           [gl_cv_host_cpu_c_abi=powerpc])
+         ;;
+
+       rs6000 )
+         gl_cv_host_cpu_c_abi=powerpc
+         ;;
+
+       riscv32 | riscv64 )
+         # There are 2 architectures (with variants): rv32* and rv64*.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if __riscv_xlen == 64
+                  int ok;
+                #else
+                  error fail
+                #endif
+              ]])],
+           [cpu=riscv64],
+           [cpu=riscv32])
+         # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d.
+         # Size of 'long' and 'void *':
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined __LP64__
+                  int ok;
+                #else
+                  error fail
+                #endif
+              ]])],
+           [main_abi=lp64],
+           [main_abi=ilp32])
+         # Float ABIs:
+         # __riscv_float_abi_double:
+         #   'float' and 'double' are passed in floating-point registers.
+         # __riscv_float_abi_single:
+         #   'float' are passed in floating-point registers.
+         # __riscv_float_abi_soft:
+         #   No values are passed in floating-point registers.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined __riscv_float_abi_double
+                  int ok;
+                #else
+                  error fail
+                #endif
+              ]])],
+           [float_abi=d],
+           [AC_COMPILE_IFELSE(
+              [AC_LANG_SOURCE(
+                 [[#if defined __riscv_float_abi_single
+                     int ok;
+                   #else
+                     error fail
+                   #endif
+                 ]])],
+              [float_abi=f],
+              [float_abi=''])
+           ])
+         gl_cv_host_cpu_c_abi="${cpu}-${main_abi}${float_abi}"
+         ;;
+
+       s390* )
+         # On s390x, the C compiler may be generating 64-bit (= s390x) code
+         # or 31-bit (= s390) code.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined __LP64__ || defined __s390x__
+                  int ok;
+                #else
+                  error fail
+                #endif
+              ]])],
+           [gl_cv_host_cpu_c_abi=s390x],
+           [gl_cv_host_cpu_c_abi=s390])
+         ;;
+
+       sparc | sparc64 )
+         # UltraSPARCs running Linux have `uname -m` = "sparc64", but the
+         # C compiler still generates 32-bit code.
+         AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#if defined __sparcv9 || defined __arch64__
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [gl_cv_host_cpu_c_abi=sparc64],
+           [gl_cv_host_cpu_c_abi=sparc])
+         ;;
+
+       *)
+         gl_cv_host_cpu_c_abi="$host_cpu"
+         ;;
+     esac
+    ])
+
+  dnl In most cases, $HOST_CPU and $HOST_CPU_C_ABI are the same.
+  HOST_CPU=`echo "$gl_cv_host_cpu_c_abi" | sed -e 's/-.*//'`
+  HOST_CPU_C_ABI="$gl_cv_host_cpu_c_abi"
+  AC_SUBST([HOST_CPU])
+  AC_SUBST([HOST_CPU_C_ABI])
+
+  # This was
+  #   AC_DEFINE_UNQUOTED([__${HOST_CPU}__])
+  #   AC_DEFINE_UNQUOTED([__${HOST_CPU_C_ABI}__])
+  # earlier, but KAI C++ 3.2d doesn't like this.
+  sed -e 's/-/_/g' >> confdefs.h <<EOF
+#ifndef __${HOST_CPU}__
+#define __${HOST_CPU}__ 1
+#endif
+#ifndef __${HOST_CPU_C_ABI}__
+#define __${HOST_CPU_C_ABI}__ 1
+#endif
+EOF
+  AH_TOP([/* CPU and C ABI indicator */
+#ifndef __i386__
+#undef __i386__
+#endif
+#ifndef __x86_64_x32__
+#undef __x86_64_x32__
+#endif
+#ifndef __x86_64__
+#undef __x86_64__
+#endif
+#ifndef __alpha__
+#undef __alpha__
+#endif
+#ifndef __arm__
+#undef __arm__
+#endif
+#ifndef __armhf__
+#undef __armhf__
+#endif
+#ifndef __arm64_ilp32__
+#undef __arm64_ilp32__
+#endif
+#ifndef __arm64__
+#undef __arm64__
+#endif
+#ifndef __hppa__
+#undef __hppa__
+#endif
+#ifndef __hppa64__
+#undef __hppa64__
+#endif
+#ifndef __ia64_ilp32__
+#undef __ia64_ilp32__
+#endif
+#ifndef __ia64__
+#undef __ia64__
+#endif
+#ifndef __m68k__
+#undef __m68k__
+#endif
+#ifndef __mips__
+#undef __mips__
+#endif
+#ifndef __mipsn32__
+#undef __mipsn32__
+#endif
+#ifndef __mips64__
+#undef __mips64__
+#endif
+#ifndef __powerpc__
+#undef __powerpc__
+#endif
+#ifndef __powerpc64__
+#undef __powerpc64__
+#endif
+#ifndef __powerpc64_elfv2__
+#undef __powerpc64_elfv2__
+#endif
+#ifndef __riscv32__
+#undef __riscv32__
+#endif
+#ifndef __riscv64__
+#undef __riscv64__
+#endif
+#ifndef __riscv32_ilp32__
+#undef __riscv32_ilp32__
+#endif
+#ifndef __riscv32_ilp32f__
+#undef __riscv32_ilp32f__
+#endif
+#ifndef __riscv32_ilp32d__
+#undef __riscv32_ilp32d__
+#endif
+#ifndef __riscv64_ilp32__
+#undef __riscv64_ilp32__
+#endif
+#ifndef __riscv64_ilp32f__
+#undef __riscv64_ilp32f__
+#endif
+#ifndef __riscv64_ilp32d__
+#undef __riscv64_ilp32d__
+#endif
+#ifndef __riscv64_lp64__
+#undef __riscv64_lp64__
+#endif
+#ifndef __riscv64_lp64f__
+#undef __riscv64_lp64f__
+#endif
+#ifndef __riscv64_lp64d__
+#undef __riscv64_lp64d__
+#endif
+#ifndef __s390__
+#undef __s390__
+#endif
+#ifndef __s390x__
+#undef __s390x__
+#endif
+#ifndef __sh__
+#undef __sh__
+#endif
+#ifndef __sparc__
+#undef __sparc__
+#endif
+#ifndef __sparc64__
+#undef __sparc64__
+#endif
+])
+
+])
+
+
+dnl Sets the HOST_CPU_C_ABI_32BIT variable to 'yes' if the C language ABI
+dnl (application binary interface) is a 32-bit one, or to 'no' otherwise.
+dnl This is a simplified variant of gl_HOST_CPU_C_ABI.
+AC_DEFUN([gl_HOST_CPU_C_ABI_32BIT],
+[
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_CACHE_CHECK([32-bit host C ABI], [gl_cv_host_cpu_c_abi_32bit],
+    [if test -n "$gl_cv_host_cpu_c_abi"; then
+       case "$gl_cv_host_cpu_c_abi" in
+         i386 | x86_64-x32 | arm | armhf | arm64-ilp32 | hppa | ia64-ilp32 | mips | mipsn32 | powerpc | riscv*-ilp32* | s390 | sparc)
+           gl_cv_host_cpu_c_abi_32bit=yes ;;
+         *)
+           gl_cv_host_cpu_c_abi_32bit=no ;;
+       esac
+     else
+       case "$host_cpu" in
+
+changequote(,)dnl
+         i[4567]86 )
+changequote([,])dnl
+           gl_cv_host_cpu_c_abi_32bit=yes
+           ;;
+
+         x86_64 )
+           # On x86_64 systems, the C compiler may be generating code in one of
+           # these ABIs:
+           # - 64-bit instruction set, 64-bit pointers, 64-bit 'long': x86_64.
+           # - 64-bit instruction set, 64-bit pointers, 32-bit 'long': x86_64
+           #   with native Windows (mingw, MSVC).
+           # - 64-bit instruction set, 32-bit pointers, 32-bit 'long': x86_64-x32.
+           # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': i386.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if (defined __x86_64__ || defined __amd64__ \
+                       || defined _M_X64 || defined _M_AMD64) \
+                      && !(defined __ILP32__ || defined _ILP32)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         arm* | aarch64 )
+           # Assume arm with EABI.
+           # On arm64 systems, the C compiler may be generating code in one of
+           # these ABIs:
+           # - aarch64 instruction set, 64-bit pointers, 64-bit 'long': arm64.
+           # - aarch64 instruction set, 32-bit pointers, 32-bit 'long': arm64-ilp32.
+           # - 32-bit instruction set, 32-bit pointers, 32-bit 'long': arm or armhf.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined __aarch64__ && !(defined __ILP32__ || defined _ILP32)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         hppa1.0 | hppa1.1 | hppa2.0* | hppa64 )
+           # On hppa, the C compiler may be generating 32-bit code or 64-bit
+           # code. In the latter case, it defines _LP64 and __LP64__.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#ifdef __LP64__
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         ia64* )
+           # On ia64 on HP-UX, the C compiler may be generating 64-bit code or
+           # 32-bit code. In the latter case, it defines _ILP32.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#ifdef _ILP32
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=yes],
+             [gl_cv_host_cpu_c_abi_32bit=no])
+           ;;
+
+         mips* )
+           # We should also check for (_MIPS_SZPTR == 64), but gcc keeps this
+           # at 32.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined _MIPS_SZLONG && (_MIPS_SZLONG == 64)
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         powerpc* )
+           # Different ABIs are in use on AIX vs. Mac OS X vs. Linux,*BSD.
+           # No need to distinguish them here; the caller may distinguish
+           # them based on the OS.
+           # On powerpc64 systems, the C compiler may still be generating
+           # 32-bit code. And on powerpc-ibm-aix systems, the C compiler may
+           # be generating 64-bit code.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined __powerpc64__ || defined _ARCH_PPC64
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         rs6000 )
+           gl_cv_host_cpu_c_abi_32bit=yes
+           ;;
+
+         riscv32 | riscv64 )
+           # There are 6 ABIs: ilp32, ilp32f, ilp32d, lp64, lp64f, lp64d.
+           # Size of 'long' and 'void *':
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined __LP64__
+                    int ok;
+                  #else
+                    error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         s390* )
+           # On s390x, the C compiler may be generating 64-bit (= s390x) code
+           # or 31-bit (= s390) code.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined __LP64__ || defined __s390x__
+                    int ok;
+                  #else
+                    error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         sparc | sparc64 )
+           # UltraSPARCs running Linux have `uname -m` = "sparc64", but the
+           # C compiler still generates 32-bit code.
+           AC_COMPILE_IFELSE(
+             [AC_LANG_SOURCE(
+                [[#if defined __sparcv9 || defined __arch64__
+                   int ok;
+                  #else
+                   error fail
+                  #endif
+                ]])],
+             [gl_cv_host_cpu_c_abi_32bit=no],
+             [gl_cv_host_cpu_c_abi_32bit=yes])
+           ;;
+
+         *)
+           gl_cv_host_cpu_c_abi_32bit=no
+           ;;
+       esac
+     fi
+    ])
+
+  HOST_CPU_C_ABI_32BIT="$gl_cv_host_cpu_c_abi_32bit"
+])
diff -Naurp dpkg-1.20.7.1-orig/m4/iconv.m4 dpkg-1.20.7.1/m4/iconv.m4
--- dpkg-1.20.7.1-orig/m4/iconv.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/iconv.m4	2021-06-09 18:22:47.470275393 -0500
@@ -0,0 +1,288 @@
+# iconv.m4 serial 21
+dnl Copyright (C) 2000-2002, 2007-2014, 2016-2019 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+  dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+
+  dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+  dnl accordingly.
+  AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+  dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+  dnl those with the standalone portable GNU libiconv installed).
+  AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
+
+  dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+  dnl accordingly.
+  AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+  dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+  dnl because if the user has installed libiconv and not disabled its use
+  dnl via --without-libiconv-prefix, he wants to use it. The first
+  dnl AC_LINK_IFELSE will then fail, the second AC_LINK_IFELSE will succeed.
+  am_save_CPPFLAGS="$CPPFLAGS"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+  AC_CACHE_CHECK([for iconv], [am_cv_func_iconv], [
+    am_cv_func_iconv="no, consider installing GNU libiconv"
+    am_cv_lib_iconv=no
+    AC_LINK_IFELSE(
+      [AC_LANG_PROGRAM(
+         [[
+#include <stdlib.h>
+#include <iconv.h>
+         ]],
+         [[iconv_t cd = iconv_open("","");
+           iconv(cd,NULL,NULL,NULL,NULL);
+           iconv_close(cd);]])],
+      [am_cv_func_iconv=yes])
+    if test "$am_cv_func_iconv" != yes; then
+      am_save_LIBS="$LIBS"
+      LIBS="$LIBS $LIBICONV"
+      AC_LINK_IFELSE(
+        [AC_LANG_PROGRAM(
+           [[
+#include <stdlib.h>
+#include <iconv.h>
+           ]],
+           [[iconv_t cd = iconv_open("","");
+             iconv(cd,NULL,NULL,NULL,NULL);
+             iconv_close(cd);]])],
+        [am_cv_lib_iconv=yes]
+        [am_cv_func_iconv=yes])
+      LIBS="$am_save_LIBS"
+    fi
+  ])
+  if test "$am_cv_func_iconv" = yes; then
+    AC_CACHE_CHECK([for working iconv], [am_cv_func_iconv_works], [
+      dnl This tests against bugs in AIX 5.1, AIX 6.1..7.1, HP-UX 11.11,
+      dnl Solaris 10.
+      am_save_LIBS="$LIBS"
+      if test $am_cv_lib_iconv = yes; then
+        LIBS="$LIBS $LIBICONV"
+      fi
+      am_cv_func_iconv_works=no
+      for ac_iconv_const in '' 'const'; do
+        AC_RUN_IFELSE(
+          [AC_LANG_PROGRAM(
+             [[
+#include <iconv.h>
+#include <string.h>
+
+#ifndef ICONV_CONST
+# define ICONV_CONST $ac_iconv_const
+#endif
+             ]],
+             [[int result = 0;
+  /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+     returns.  */
+  {
+    iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+    if (cd_utf8_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\342\202\254"; /* EURO SIGN */
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_utf8_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 1;
+        iconv_close (cd_utf8_to_88591);
+      }
+  }
+  /* Test against Solaris 10 bug: Failures are not distinguishable from
+     successful returns.  */
+  {
+    iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
+    if (cd_ascii_to_88591 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\263";
+        char buf[10];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_ascii_to_88591,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res == 0)
+          result |= 2;
+        iconv_close (cd_ascii_to_88591);
+      }
+  }
+  /* Test against AIX 6.1..7.1 bug: Buffer overrun.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("UTF-8", "ISO-8859-1");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304";
+        static char buf[2] = { (char)0xDE, (char)0xAD };
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = 1;
+        char *outptr = buf;
+        size_t outbytesleft = 1;
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if (res != (size_t)(-1) || outptr - buf > 1 || buf[1] != (char)0xAD)
+          result |= 4;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#if 0 /* This bug could be worked around by the caller.  */
+  /* Test against HP-UX 11.11 bug: Positive return value instead of 0.  */
+  {
+    iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+    if (cd_88591_to_utf8 != (iconv_t)(-1))
+      {
+        static ICONV_CONST char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+        char buf[50];
+        ICONV_CONST char *inptr = input;
+        size_t inbytesleft = strlen (input);
+        char *outptr = buf;
+        size_t outbytesleft = sizeof (buf);
+        size_t res = iconv (cd_88591_to_utf8,
+                            &inptr, &inbytesleft,
+                            &outptr, &outbytesleft);
+        if ((int)res > 0)
+          result |= 8;
+        iconv_close (cd_88591_to_utf8);
+      }
+  }
+#endif
+  /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+     provided.  */
+  {
+    /* Try standardized names.  */
+    iconv_t cd1 = iconv_open ("UTF-8", "EUC-JP");
+    /* Try IRIX, OSF/1 names.  */
+    iconv_t cd2 = iconv_open ("UTF-8", "eucJP");
+    /* Try AIX names.  */
+    iconv_t cd3 = iconv_open ("UTF-8", "IBM-eucJP");
+    /* Try HP-UX names.  */
+    iconv_t cd4 = iconv_open ("utf8", "eucJP");
+    if (cd1 == (iconv_t)(-1) && cd2 == (iconv_t)(-1)
+        && cd3 == (iconv_t)(-1) && cd4 == (iconv_t)(-1))
+      result |= 16;
+    if (cd1 != (iconv_t)(-1))
+      iconv_close (cd1);
+    if (cd2 != (iconv_t)(-1))
+      iconv_close (cd2);
+    if (cd3 != (iconv_t)(-1))
+      iconv_close (cd3);
+    if (cd4 != (iconv_t)(-1))
+      iconv_close (cd4);
+  }
+  return result;
+]])],
+          [am_cv_func_iconv_works=yes], ,
+          [case "$host_os" in
+             aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+             *)            am_cv_func_iconv_works="guessing yes" ;;
+           esac])
+        test "$am_cv_func_iconv_works" = no || break
+      done
+      LIBS="$am_save_LIBS"
+    ])
+    case "$am_cv_func_iconv_works" in
+      *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+      *)   am_func_iconv=yes ;;
+    esac
+  else
+    am_func_iconv=no am_cv_lib_iconv=no
+  fi
+  if test "$am_func_iconv" = yes; then
+    AC_DEFINE([HAVE_ICONV], [1],
+      [Define if you have the iconv() function and it works.])
+  fi
+  if test "$am_cv_lib_iconv" = yes; then
+    AC_MSG_CHECKING([how to link with libiconv])
+    AC_MSG_RESULT([$LIBICONV])
+  else
+    dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+    dnl either.
+    CPPFLAGS="$am_save_CPPFLAGS"
+    LIBICONV=
+    LTLIBICONV=
+  fi
+  AC_SUBST([LIBICONV])
+  AC_SUBST([LTLIBICONV])
+])
+
+dnl Define AM_ICONV using AC_DEFUN_ONCE for Autoconf >= 2.64, in order to
+dnl avoid warnings like
+dnl "warning: AC_REQUIRE: `AM_ICONV' was expanded before it was required".
+dnl This is tricky because of the way 'aclocal' is implemented:
+dnl - It requires defining an auxiliary macro whose name ends in AC_DEFUN.
+dnl   Otherwise aclocal's initial scan pass would miss the macro definition.
+dnl - It requires a line break inside the AC_DEFUN_ONCE and AC_DEFUN expansions.
+dnl   Otherwise aclocal would emit many "Use of uninitialized value $1"
+dnl   warnings.
+m4_define([gl_iconv_AC_DEFUN],
+  m4_version_prereq([2.64],
+    [[AC_DEFUN_ONCE(
+        [$1], [$2])]],
+    [m4_ifdef([gl_00GNULIB],
+       [[AC_DEFUN_ONCE(
+           [$1], [$2])]],
+       [[AC_DEFUN(
+           [$1], [$2])]])]))
+gl_iconv_AC_DEFUN([AM_ICONV],
+[
+  AM_ICONV_LINK
+  if test "$am_cv_func_iconv" = yes; then
+    AC_MSG_CHECKING([for iconv declaration])
+    AC_CACHE_VAL([am_cv_proto_iconv], [
+      AC_COMPILE_IFELSE(
+        [AC_LANG_PROGRAM(
+           [[
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(_MSC_VER) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+           ]],
+           [[]])],
+        [am_cv_proto_iconv_arg1=""],
+        [am_cv_proto_iconv_arg1="const"])
+      am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+    am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+    AC_MSG_RESULT([
+         $am_cv_proto_iconv])
+  else
+    dnl When compiling GNU libiconv on a system that does not have iconv yet,
+    dnl pick the POSIX compliant declaration without 'const'.
+    am_cv_proto_iconv_arg1=""
+  fi
+  AC_DEFINE_UNQUOTED([ICONV_CONST], [$am_cv_proto_iconv_arg1],
+    [Define as const if the declaration of iconv() needs const.])
+  dnl Also substitute ICONV_CONST in the gnulib generated <iconv.h>.
+  m4_ifdef([gl_ICONV_H_DEFAULTS],
+    [AC_REQUIRE([gl_ICONV_H_DEFAULTS])
+     if test -n "$am_cv_proto_iconv_arg1"; then
+       ICONV_CONST="const"
+     fi
+    ])
+])
diff -Naurp dpkg-1.20.7.1-orig/m4/intlmacosx.m4 dpkg-1.20.7.1/m4/intlmacosx.m4
--- dpkg-1.20.7.1-orig/m4/intlmacosx.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/intlmacosx.m4	2021-06-09 18:22:47.470275393 -0500
@@ -0,0 +1,72 @@
+# intlmacosx.m4 serial 6 (gettext-0.20)
+dnl Copyright (C) 2004-2014, 2016, 2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Checks for special options needed on Mac OS X.
+dnl Defines INTL_MACOSX_LIBS.
+AC_DEFUN([gt_INTL_MACOSX],
+[
+  dnl Check for API introduced in Mac OS X 10.4.
+  AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
+    [gt_cv_func_CFPreferencesCopyAppValue],
+    [gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <CoreFoundation/CFPreferences.h>]],
+          [[CFPreferencesCopyAppValue(NULL, NULL)]])],
+       [gt_cv_func_CFPreferencesCopyAppValue=yes],
+       [gt_cv_func_CFPreferencesCopyAppValue=no])
+     LIBS="$gt_save_LIBS"])
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+    AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], [1],
+      [Define to 1 if you have the Mac OS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
+  fi
+  dnl Check for API introduced in Mac OS X 10.5.
+  AC_CACHE_CHECK([for CFLocaleCopyCurrent], [gt_cv_func_CFLocaleCopyCurrent],
+    [gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <CoreFoundation/CFLocale.h>]],
+          [[CFLocaleCopyCurrent();]])],
+       [gt_cv_func_CFLocaleCopyCurrent=yes],
+       [gt_cv_func_CFLocaleCopyCurrent=no])
+     LIBS="$gt_save_LIBS"])
+  if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+    AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], [1],
+      [Define to 1 if you have the Mac OS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
+  fi
+  AC_CACHE_CHECK([for CFLocaleCopyPreferredLanguages], [gt_cv_func_CFLocaleCopyPreferredLanguages],
+    [gt_save_LIBS="$LIBS"
+     LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+     AC_LINK_IFELSE(
+       [AC_LANG_PROGRAM(
+          [[#include <CoreFoundation/CFLocale.h>]],
+          [[CFLocaleCopyPreferredLanguages();]])],
+       [gt_cv_func_CFLocaleCopyPreferredLanguages=yes],
+       [gt_cv_func_CFLocaleCopyPreferredLanguages=no])
+     LIBS="$gt_save_LIBS"])
+  if test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
+    AC_DEFINE([HAVE_CFLOCALECOPYPREFERREDLANGUAGES], [1],
+      [Define to 1 if you have the Mac OS X function CFLocaleCopyPreferredLanguages in the CoreFoundation framework.])
+  fi
+  INTL_MACOSX_LIBS=
+  if test $gt_cv_func_CFPreferencesCopyAppValue = yes \
+     || test $gt_cv_func_CFLocaleCopyCurrent = yes \
+     || test $gt_cv_func_CFLocaleCopyPreferredLanguages = yes; then
+    INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+  fi
+  AC_SUBST([INTL_MACOSX_LIBS])
+])
diff -Naurp dpkg-1.20.7.1-orig/m4/lib-ld.m4 dpkg-1.20.7.1/m4/lib-ld.m4
--- dpkg-1.20.7.1-orig/m4/lib-ld.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/lib-ld.m4	2021-06-09 18:22:47.470275393 -0500
@@ -0,0 +1,168 @@
+# lib-ld.m4 serial 9
+dnl Copyright (C) 1996-2003, 2009-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/_*LT_PATH/AC_LIB_PROG/ and s/lt_/acl_/ to avoid
+dnl collision with libtool.m4.
+
+dnl From libtool-2.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], [acl_cv_prog_gnu_ld],
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  acl_cv_prog_gnu_ld=yes
+  ;;
+*)
+  acl_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-2.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+        [assume the C compiler uses GNU ld [default=no]])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+if test -n "$LD"; then
+  AC_MSG_CHECKING([for ld])
+elif test "$GCC" = yes; then
+  AC_MSG_CHECKING([for ld used by $CC])
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+if test -n "$LD"; then
+  # Let the user override the test with a path.
+  :
+else
+  AC_CACHE_VAL([acl_cv_path_LD],
+  [
+    acl_cv_path_LD= # Final result of this test
+    ac_prog=ld # Program to search in $PATH
+    if test "$GCC" = yes; then
+      # Check if gcc -print-prog-name=ld gives a path.
+      case $host in
+        *-*-mingw*)
+          # gcc leaves a trailing carriage return which upsets mingw
+          acl_output=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+        *)
+          acl_output=`($CC -print-prog-name=ld) 2>&5` ;;
+      esac
+      case $acl_output in
+        # Accept absolute paths.
+        [[\\/]]* | ?:[[\\/]]*)
+          re_direlt='/[[^/]][[^/]]*/\.\./'
+          # Canonicalize the pathname of ld
+          acl_output=`echo "$acl_output" | sed 's%\\\\%/%g'`
+          while echo "$acl_output" | grep "$re_direlt" > /dev/null 2>&1; do
+            acl_output=`echo $acl_output | sed "s%$re_direlt%/%"`
+          done
+          # Got the pathname. No search in PATH is needed.
+          acl_cv_path_LD="$acl_output"
+          ac_prog=
+          ;;
+        "")
+          # If it fails, then pretend we aren't using GCC.
+          ;;
+        *)
+          # If it is relative, then search for the first ld in PATH.
+          with_gnu_ld=unknown
+          ;;
+      esac
+    fi
+    if test -n "$ac_prog"; then
+      # Search for $ac_prog in $PATH.
+      acl_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+      for ac_dir in $PATH; do
+        IFS="$acl_save_ifs"
+        test -z "$ac_dir" && ac_dir=.
+        if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+          acl_cv_path_LD="$ac_dir/$ac_prog"
+          # Check to see if the program is GNU ld.  I'd rather use --version,
+          # but apparently some variants of GNU ld only accept -v.
+          # Break only if it was the GNU/non-GNU ld that we prefer.
+          case `"$acl_cv_path_LD" -v 2>&1 </dev/null` in
+            *GNU* | *'with BFD'*)
+              test "$with_gnu_ld" != no && break
+              ;;
+            *)
+              test "$with_gnu_ld" != yes && break
+              ;;
+          esac
+        fi
+      done
+      IFS="$acl_save_ifs"
+    fi
+    case $host in
+      *-*-aix*)
+        AC_COMPILE_IFELSE(
+          [AC_LANG_SOURCE(
+             [[#if defined __powerpc64__ || defined _ARCH_PPC64
+                int ok;
+               #else
+                error fail
+               #endif
+             ]])],
+          [# The compiler produces 64-bit code. Add option '-b64' so that the
+           # linker groks 64-bit object files.
+           case "$acl_cv_path_LD " in
+             *" -b64 "*) ;;
+             *) acl_cv_path_LD="$acl_cv_path_LD -b64" ;;
+           esac
+          ], [])
+        ;;
+      sparc64-*-netbsd*)
+        AC_COMPILE_IFELSE(
+          [AC_LANG_SOURCE(
+             [[#if defined __sparcv9 || defined __arch64__
+                int ok;
+               #else
+                error fail
+               #endif
+             ]])],
+          [],
+          [# The compiler produces 32-bit code. Add option '-m elf32_sparc'
+           # so that the linker groks 32-bit object files.
+           case "$acl_cv_path_LD " in
+             *" -m elf32_sparc "*) ;;
+             *) acl_cv_path_LD="$acl_cv_path_LD -m elf32_sparc" ;;
+           esac
+          ])
+        ;;
+    esac
+  ])
+  LD="$acl_cv_path_LD"
+fi
+if test -n "$LD"; then
+  AC_MSG_RESULT([$LD])
+else
+  AC_MSG_RESULT([no])
+  AC_MSG_ERROR([no acceptable ld found in \$PATH])
+fi
+AC_LIB_PROG_LD_GNU
+])
diff -Naurp dpkg-1.20.7.1-orig/m4/lib-link.m4 dpkg-1.20.7.1/m4/lib-link.m4
--- dpkg-1.20.7.1-orig/m4/lib-link.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/lib-link.m4	2021-06-09 18:22:47.471275395 -0500
@@ -0,0 +1,774 @@
+# lib-link.m4 serial 28
+dnl Copyright (C) 2001-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ([2.61])
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  pushdef([Name],[m4_translit([$1],[./+-], [____])])
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+    AC_LIB_LINKFLAGS_BODY([$1], [$2])
+    ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+    ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+    ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+    ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
+  ])
+  LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+  LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+  INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+  LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
+  dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+  dnl results of this search when this library appears as a dependency.
+  HAVE_LIB[]NAME=yes
+  popdef([NAME])
+  popdef([Name])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode, [missing-message])
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. The missing-message
+dnl defaults to 'no' and may contain additional hints for the user.
+dnl If found, it sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME}
+dnl and LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  AC_REQUIRE([AC_LIB_RPATH])
+  pushdef([Name],[m4_translit([$1],[./+-], [____])])
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+
+  dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+  dnl accordingly.
+  AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+  dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+  dnl because if the user has installed lib[]Name and not disabled its use
+  dnl via --without-lib[]Name-prefix, he wants to use it.
+  ac_save_CPPFLAGS="$CPPFLAGS"
+  AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+  AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+    ac_save_LIBS="$LIBS"
+    dnl If $LIB[]NAME contains some -l options, add it to the end of LIBS,
+    dnl because these -l options might require -L options that are present in
+    dnl LIBS. -l options benefit only from the -L options listed before it.
+    dnl Otherwise, add it to the front of LIBS, because it may be a static
+    dnl library that depends on another static library that is present in LIBS.
+    dnl Static libraries benefit only from the static libraries listed after
+    dnl it.
+    case " $LIB[]NAME" in
+      *" -l"*) LIBS="$LIBS $LIB[]NAME" ;;
+      *)       LIBS="$LIB[]NAME $LIBS" ;;
+    esac
+    AC_LINK_IFELSE(
+      [AC_LANG_PROGRAM([[$3]], [[$4]])],
+      [ac_cv_lib[]Name=yes],
+      [ac_cv_lib[]Name='m4_if([$5], [], [no], [[$5]])'])
+    LIBS="$ac_save_LIBS"
+  ])
+  if test "$ac_cv_lib[]Name" = yes; then
+    HAVE_LIB[]NAME=yes
+    AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the lib][$1 library.])
+    AC_MSG_CHECKING([how to link with lib[]$1])
+    AC_MSG_RESULT([$LIB[]NAME])
+  else
+    HAVE_LIB[]NAME=no
+    dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+    dnl $INC[]NAME either.
+    CPPFLAGS="$ac_save_CPPFLAGS"
+    LIB[]NAME=
+    LTLIB[]NAME=
+    LIB[]NAME[]_PREFIX=
+  fi
+  AC_SUBST([HAVE_LIB]NAME)
+  AC_SUBST([LIB]NAME)
+  AC_SUBST([LTLIB]NAME)
+  AC_SUBST([LIB]NAME[_PREFIX])
+  popdef([NAME])
+  popdef([Name])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl   acl_libext,
+dnl   acl_shlibext,
+dnl   acl_libname_spec,
+dnl   acl_library_names_spec,
+dnl   acl_hardcode_libdir_flag_spec,
+dnl   acl_hardcode_libdir_separator,
+dnl   acl_hardcode_direct,
+dnl   acl_hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+  dnl Complain if config.rpath is missing.
+  AC_REQUIRE_AUX_FILE([config.rpath])
+  AC_REQUIRE([AC_PROG_CC])                dnl we use $CC, $GCC, $LDFLAGS
+  AC_REQUIRE([AC_LIB_PROG_LD])            dnl we use $LD, $with_gnu_ld
+  AC_REQUIRE([AC_CANONICAL_HOST])         dnl we use $host
+  AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+  AC_CACHE_CHECK([for shared library run path origin], [acl_cv_rpath], [
+    CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+    ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+    . ./conftest.sh
+    rm -f ./conftest.sh
+    acl_cv_rpath=done
+  ])
+  wl="$acl_cv_wl"
+  acl_libext="$acl_cv_libext"
+  acl_shlibext="$acl_cv_shlibext"
+  acl_libname_spec="$acl_cv_libname_spec"
+  acl_library_names_spec="$acl_cv_library_names_spec"
+  acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+  acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+  acl_hardcode_direct="$acl_cv_hardcode_direct"
+  acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+  dnl Determine whether the user wants rpath handling at all.
+  AC_ARG_ENABLE([rpath],
+    [  --disable-rpath         do not hardcode runtime library paths],
+    :, enable_rpath=yes)
+])
+
+dnl AC_LIB_FROMPACKAGE(name, package)
+dnl declares that libname comes from the given package. The configure file
+dnl will then not have a --with-libname-prefix option but a
+dnl --with-package-prefix option. Several libraries can come from the same
+dnl package. This declaration must occur before an AC_LIB_LINKFLAGS or similar
+dnl macro call that searches for libname.
+AC_DEFUN([AC_LIB_FROMPACKAGE],
+[
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  define([acl_frompackage_]NAME, [$2])
+  popdef([NAME])
+  pushdef([PACK],[$2])
+  pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
+                                     [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  define([acl_libsinpackage_]PACKUP,
+    m4_ifdef([acl_libsinpackage_]PACKUP, [m4_defn([acl_libsinpackage_]PACKUP)[, ]],)[lib$1])
+  popdef([PACKUP])
+  popdef([PACK])
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
+dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  pushdef([NAME],[m4_translit([$1],[abcdefghijklmnopqrstuvwxyz./+-],
+                                   [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  pushdef([PACK],[m4_ifdef([acl_frompackage_]NAME, [acl_frompackage_]NAME, lib[$1])])
+  pushdef([PACKUP],[m4_translit(PACK,[abcdefghijklmnopqrstuvwxyz./+-],
+                                     [ABCDEFGHIJKLMNOPQRSTUVWXYZ____])])
+  pushdef([PACKLIBS],[m4_ifdef([acl_frompackage_]NAME, [acl_libsinpackage_]PACKUP, lib[$1])])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_ARG_WITH(PACK[-prefix],
+[[  --with-]]PACK[[-prefix[=DIR]  search for ]PACKLIBS[ in DIR/include and DIR/lib
+  --without-]]PACK[[-prefix     don't search for ]PACKLIBS[ in includedir and libdir]],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+        if test "$acl_libdirstem2" != "$acl_libdirstem" \
+           && test ! -d "$withval/$acl_libdirstem"; then
+          additional_libdir="$withval/$acl_libdirstem2"
+        fi
+      fi
+    fi
+])
+  dnl Search the library and its dependencies in $additional_libdir and
+  dnl $LDFLAGS. Using breadth-first-seach.
+  LIB[]NAME=
+  LTLIB[]NAME=
+  INC[]NAME=
+  LIB[]NAME[]_PREFIX=
+  dnl HAVE_LIB${NAME} is an indicator that LIB${NAME}, LTLIB${NAME} have been
+  dnl computed. So it has to be reset here.
+  HAVE_LIB[]NAME=
+  rpathdirs=
+  ltrpathdirs=
+  names_already_handled=
+  names_next_round='$1 $2'
+  while test -n "$names_next_round"; do
+    names_this_round="$names_next_round"
+    names_next_round=
+    for name in $names_this_round; do
+      already_handled=
+      for n in $names_already_handled; do
+        if test "$n" = "$name"; then
+          already_handled=yes
+          break
+        fi
+      done
+      if test -z "$already_handled"; then
+        names_already_handled="$names_already_handled $name"
+        dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+        dnl or AC_LIB_HAVE_LINKFLAGS call.
+        uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./+-|ABCDEFGHIJKLMNOPQRSTUVWXYZ____|'`
+        eval value=\"\$HAVE_LIB$uppername\"
+        if test -n "$value"; then
+          if test "$value" = yes; then
+            eval value=\"\$LIB$uppername\"
+            test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+            eval value=\"\$LTLIB$uppername\"
+            test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+          else
+            dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+            dnl that this library doesn't exist. So just drop it.
+            :
+          fi
+        else
+          dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+          dnl and the already constructed $LIBNAME/$LTLIBNAME.
+          found_dir=
+          found_la=
+          found_so=
+          found_a=
+          eval libname=\"$acl_libname_spec\"    # typically: libname=lib$name
+          if test -n "$acl_shlibext"; then
+            shrext=".$acl_shlibext"             # typically: shrext=.so
+          else
+            shrext=
+          fi
+          if test $use_additional = yes; then
+            dir="$additional_libdir"
+            dnl The same code as in the loop below:
+            dnl First look for a shared library.
+            if test -n "$acl_shlibext"; then
+              if test -f "$dir/$libname$shrext"; then
+                found_dir="$dir"
+                found_so="$dir/$libname$shrext"
+              else
+                if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                  ver=`(cd "$dir" && \
+                        for f in "$libname$shrext".*; do echo "$f"; done \
+                        | sed -e "s,^$libname$shrext\\\\.,," \
+                        | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                        | sed 1q ) 2>/dev/null`
+                  if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                    found_dir="$dir"
+                    found_so="$dir/$libname$shrext.$ver"
+                  fi
+                else
+                  eval library_names=\"$acl_library_names_spec\"
+                  for f in $library_names; do
+                    if test -f "$dir/$f"; then
+                      found_dir="$dir"
+                      found_so="$dir/$f"
+                      break
+                    fi
+                  done
+                fi
+              fi
+            fi
+            dnl Then look for a static library.
+            if test "X$found_dir" = "X"; then
+              if test -f "$dir/$libname.$acl_libext"; then
+                found_dir="$dir"
+                found_a="$dir/$libname.$acl_libext"
+              fi
+            fi
+            if test "X$found_dir" != "X"; then
+              if test -f "$dir/$libname.la"; then
+                found_la="$dir/$libname.la"
+              fi
+            fi
+          fi
+          if test "X$found_dir" = "X"; then
+            for x in $LDFLAGS $LTLIB[]NAME; do
+              AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+              case "$x" in
+                -L*)
+                  dir=`echo "X$x" | sed -e 's/^X-L//'`
+                  dnl First look for a shared library.
+                  if test -n "$acl_shlibext"; then
+                    if test -f "$dir/$libname$shrext"; then
+                      found_dir="$dir"
+                      found_so="$dir/$libname$shrext"
+                    else
+                      if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+                        ver=`(cd "$dir" && \
+                              for f in "$libname$shrext".*; do echo "$f"; done \
+                              | sed -e "s,^$libname$shrext\\\\.,," \
+                              | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+                              | sed 1q ) 2>/dev/null`
+                        if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+                          found_dir="$dir"
+                          found_so="$dir/$libname$shrext.$ver"
+                        fi
+                      else
+                        eval library_names=\"$acl_library_names_spec\"
+                        for f in $library_names; do
+                          if test -f "$dir/$f"; then
+                            found_dir="$dir"
+                            found_so="$dir/$f"
+                            break
+                          fi
+                        done
+                      fi
+                    fi
+                  fi
+                  dnl Then look for a static library.
+                  if test "X$found_dir" = "X"; then
+                    if test -f "$dir/$libname.$acl_libext"; then
+                      found_dir="$dir"
+                      found_a="$dir/$libname.$acl_libext"
+                    fi
+                  fi
+                  if test "X$found_dir" != "X"; then
+                    if test -f "$dir/$libname.la"; then
+                      found_la="$dir/$libname.la"
+                    fi
+                  fi
+                  ;;
+              esac
+              if test "X$found_dir" != "X"; then
+                break
+              fi
+            done
+          fi
+          if test "X$found_dir" != "X"; then
+            dnl Found the library.
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+            if test "X$found_so" != "X"; then
+              dnl Linking with a shared library. We attempt to hardcode its
+              dnl directory into the executable's runpath, unless it's the
+              dnl standard /usr/lib.
+              if test "$enable_rpath" = no \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem" \
+                 || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+                dnl No hardcoding is needed.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+              else
+                dnl Use an explicit option to hardcode DIR into the resulting
+                dnl binary.
+                dnl Potentially add DIR to ltrpathdirs.
+                dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                haveit=
+                for x in $ltrpathdirs; do
+                  if test "X$x" = "X$found_dir"; then
+                    haveit=yes
+                    break
+                  fi
+                done
+                if test -z "$haveit"; then
+                  ltrpathdirs="$ltrpathdirs $found_dir"
+                fi
+                dnl The hardcoding into $LIBNAME is system dependent.
+                if test "$acl_hardcode_direct" = yes; then
+                  dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+                  dnl resulting binary.
+                  LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                else
+                  if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+                    dnl Use an explicit option to hardcode DIR into the resulting
+                    dnl binary.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    dnl Potentially add DIR to rpathdirs.
+                    dnl The rpathdirs will be appended to $LIBNAME at the end.
+                    haveit=
+                    for x in $rpathdirs; do
+                      if test "X$x" = "X$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      rpathdirs="$rpathdirs $found_dir"
+                    fi
+                  else
+                    dnl Rely on "-L$found_dir".
+                    dnl But don't add it if it's already contained in the LDFLAGS
+                    dnl or the already constructed $LIBNAME
+                    haveit=
+                    for x in $LDFLAGS $LIB[]NAME; do
+                      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                      if test "X$x" = "X-L$found_dir"; then
+                        haveit=yes
+                        break
+                      fi
+                    done
+                    if test -z "$haveit"; then
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+                    fi
+                    if test "$acl_hardcode_minus_L" != no; then
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+                    else
+                      dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
+                      dnl here, because this doesn't fit in flags passed to the
+                      dnl compiler. So give up. No hardcoding. This affects only
+                      dnl very old systems.
+                      dnl FIXME: Not sure whether we should use
+                      dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+                      dnl here.
+                      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+                    fi
+                  fi
+                fi
+              fi
+            else
+              if test "X$found_a" != "X"; then
+                dnl Linking with a static library.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+              else
+                dnl We shouldn't come here, but anyway it's good to have a
+                dnl fallback.
+                LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+              fi
+            fi
+            dnl Assume the include files are nearby.
+            additional_includedir=
+            case "$found_dir" in
+              */$acl_libdirstem | */$acl_libdirstem/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+                if test "$name" = '$1'; then
+                  LIB[]NAME[]_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+              */$acl_libdirstem2 | */$acl_libdirstem2/)
+                basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
+                if test "$name" = '$1'; then
+                  LIB[]NAME[]_PREFIX="$basedir"
+                fi
+                additional_includedir="$basedir/include"
+                ;;
+            esac
+            if test "X$additional_includedir" != "X"; then
+              dnl Potentially add $additional_includedir to $INCNAME.
+              dnl But don't add it
+              dnl   1. if it's the standard /usr/include,
+              dnl   2. if it's /usr/local/include and we are using GCC on Linux,
+              dnl   3. if it's already present in $CPPFLAGS or the already
+              dnl      constructed $INCNAME,
+              dnl   4. if it doesn't exist as a directory.
+              if test "X$additional_includedir" != "X/usr/include"; then
+                haveit=
+                if test "X$additional_includedir" = "X/usr/local/include"; then
+                  if test -n "$GCC"; then
+                    case $host_os in
+                      linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                    esac
+                  fi
+                fi
+                if test -z "$haveit"; then
+                  for x in $CPPFLAGS $INC[]NAME; do
+                    AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                    if test "X$x" = "X-I$additional_includedir"; then
+                      haveit=yes
+                      break
+                    fi
+                  done
+                  if test -z "$haveit"; then
+                    if test -d "$additional_includedir"; then
+                      dnl Really add $additional_includedir to $INCNAME.
+                      INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+                    fi
+                  fi
+                fi
+              fi
+            fi
+            dnl Look for dependencies.
+            if test -n "$found_la"; then
+              dnl Read the .la file. It defines the variables
+              dnl dlname, library_names, old_library, dependency_libs, current,
+              dnl age, revision, installed, dlopen, dlpreopen, libdir.
+              save_libdir="$libdir"
+              case "$found_la" in
+                */* | *\\*) . "$found_la" ;;
+                *) . "./$found_la" ;;
+              esac
+              libdir="$save_libdir"
+              dnl We use only dependency_libs.
+              for dep in $dependency_libs; do
+                case "$dep" in
+                  -L*)
+                    additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+                    dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+                    dnl But don't add it
+                    dnl   1. if it's the standard /usr/lib,
+                    dnl   2. if it's /usr/local/lib and we are using GCC on Linux,
+                    dnl   3. if it's already present in $LDFLAGS or the already
+                    dnl      constructed $LIBNAME,
+                    dnl   4. if it doesn't exist as a directory.
+                    if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
+                       && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+                      haveit=
+                      if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
+                         || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+                        if test -n "$GCC"; then
+                          case $host_os in
+                            linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+                          esac
+                        fi
+                      fi
+                      if test -z "$haveit"; then
+                        haveit=
+                        for x in $LDFLAGS $LIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LIBNAME.
+                            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                        haveit=
+                        for x in $LDFLAGS $LTLIB[]NAME; do
+                          AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+                          if test "X$x" = "X-L$additional_libdir"; then
+                            haveit=yes
+                            break
+                          fi
+                        done
+                        if test -z "$haveit"; then
+                          if test -d "$additional_libdir"; then
+                            dnl Really add $additional_libdir to $LTLIBNAME.
+                            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+                          fi
+                        fi
+                      fi
+                    fi
+                    ;;
+                  -R*)
+                    dir=`echo "X$dep" | sed -e 's/^X-R//'`
+                    if test "$enable_rpath" != no; then
+                      dnl Potentially add DIR to rpathdirs.
+                      dnl The rpathdirs will be appended to $LIBNAME at the end.
+                      haveit=
+                      for x in $rpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        rpathdirs="$rpathdirs $dir"
+                      fi
+                      dnl Potentially add DIR to ltrpathdirs.
+                      dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+                      haveit=
+                      for x in $ltrpathdirs; do
+                        if test "X$x" = "X$dir"; then
+                          haveit=yes
+                          break
+                        fi
+                      done
+                      if test -z "$haveit"; then
+                        ltrpathdirs="$ltrpathdirs $dir"
+                      fi
+                    fi
+                    ;;
+                  -l*)
+                    dnl Handle this in the next round.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+                    ;;
+                  *.la)
+                    dnl Handle this in the next round. Throw away the .la's
+                    dnl directory; it is already contained in a preceding -L
+                    dnl option.
+                    names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+                    ;;
+                  *)
+                    dnl Most likely an immediate library name.
+                    LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+                    LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+                    ;;
+                esac
+              done
+            fi
+          else
+            dnl Didn't find the library; assume it is in the system directories
+            dnl known to the linker and runtime loader. (All the system
+            dnl directories known to the linker should also be known to the
+            dnl runtime loader, otherwise the system is severely misconfigured.)
+            LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+            LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+          fi
+        fi
+      fi
+    done
+  done
+  if test "X$rpathdirs" != "X"; then
+    if test -n "$acl_hardcode_libdir_separator"; then
+      dnl Weird platform: only the last -rpath option counts, the user must
+      dnl pass all path elements in one option. We can arrange that for a
+      dnl single library, but not when more than one $LIBNAMEs are used.
+      alldirs=
+      for found_dir in $rpathdirs; do
+        alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+      done
+      dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
+      acl_save_libdir="$libdir"
+      libdir="$alldirs"
+      eval flag=\"$acl_hardcode_libdir_flag_spec\"
+      libdir="$acl_save_libdir"
+      LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+    else
+      dnl The -rpath options are cumulative.
+      for found_dir in $rpathdirs; do
+        acl_save_libdir="$libdir"
+        libdir="$found_dir"
+        eval flag=\"$acl_hardcode_libdir_flag_spec\"
+        libdir="$acl_save_libdir"
+        LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+      done
+    fi
+  fi
+  if test "X$ltrpathdirs" != "X"; then
+    dnl When using libtool, the option that works for both libraries and
+    dnl executables is -R. The -R options are cumulative.
+    for found_dir in $ltrpathdirs; do
+      LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+    done
+  fi
+  popdef([PACKLIBS])
+  popdef([PACKUP])
+  popdef([PACK])
+  popdef([NAME])
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+  for element in [$2]; do
+    haveit=
+    for x in $[$1]; do
+      AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+      if test "X$x" = "X$element"; then
+        haveit=yes
+        break
+      fi
+    done
+    if test -z "$haveit"; then
+      [$1]="${[$1]}${[$1]:+ }$element"
+    fi
+  done
+])
+
+dnl For those cases where a variable contains several -L and -l options
+dnl referring to unknown libraries and directories, this macro determines the
+dnl necessary additional linker options for the runtime path.
+dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
+dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
+dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
+dnl otherwise linking without libtool is assumed.
+AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
+[
+  AC_REQUIRE([AC_LIB_RPATH])
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  $1=
+  if test "$enable_rpath" != no; then
+    if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+      dnl Use an explicit option to hardcode directories into the resulting
+      dnl binary.
+      rpathdirs=
+      next=
+      for opt in $2; do
+        if test -n "$next"; then
+          dir="$next"
+          dnl No need to hardcode the standard /usr/lib.
+          if test "X$dir" != "X/usr/$acl_libdirstem" \
+             && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+            rpathdirs="$rpathdirs $dir"
+          fi
+          next=
+        else
+          case $opt in
+            -L) next=yes ;;
+            -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
+                 dnl No need to hardcode the standard /usr/lib.
+                 if test "X$dir" != "X/usr/$acl_libdirstem" \
+                    && test "X$dir" != "X/usr/$acl_libdirstem2"; then
+                   rpathdirs="$rpathdirs $dir"
+                 fi
+                 next= ;;
+            *) next= ;;
+          esac
+        fi
+      done
+      if test "X$rpathdirs" != "X"; then
+        if test -n ""$3""; then
+          dnl libtool is used for linking. Use -R options.
+          for dir in $rpathdirs; do
+            $1="${$1}${$1:+ }-R$dir"
+          done
+        else
+          dnl The linker is used for linking directly.
+          if test -n "$acl_hardcode_libdir_separator"; then
+            dnl Weird platform: only the last -rpath option counts, the user
+            dnl must pass all path elements in one option.
+            alldirs=
+            for dir in $rpathdirs; do
+              alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
+            done
+            acl_save_libdir="$libdir"
+            libdir="$alldirs"
+            eval flag=\"$acl_hardcode_libdir_flag_spec\"
+            libdir="$acl_save_libdir"
+            $1="$flag"
+          else
+            dnl The -rpath options are cumulative.
+            for dir in $rpathdirs; do
+              acl_save_libdir="$libdir"
+              libdir="$dir"
+              eval flag=\"$acl_hardcode_libdir_flag_spec\"
+              libdir="$acl_save_libdir"
+              $1="${$1}${$1:+ }$flag"
+            done
+          fi
+        fi
+      fi
+    fi
+  fi
+  AC_SUBST([$1])
+])
diff -Naurp dpkg-1.20.7.1-orig/m4/lib-prefix.m4 dpkg-1.20.7.1/m4/lib-prefix.m4
--- dpkg-1.20.7.1-orig/m4/lib-prefix.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/lib-prefix.m4	2021-06-09 18:22:47.471275395 -0500
@@ -0,0 +1,249 @@
+# lib-prefix.m4 serial 14
+dnl Copyright (C) 2001-2005, 2008-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+  AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+  AC_REQUIRE([AC_PROG_CC])
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+  AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+  dnl By default, look in $includedir and $libdir.
+  use_additional=yes
+  AC_LIB_WITH_FINAL_PREFIX([
+    eval additional_includedir=\"$includedir\"
+    eval additional_libdir=\"$libdir\"
+  ])
+  AC_ARG_WITH([lib-prefix],
+[[  --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+  --without-lib-prefix    don't search for libraries in includedir and libdir]],
+[
+    if test "X$withval" = "Xno"; then
+      use_additional=no
+    else
+      if test "X$withval" = "X"; then
+        AC_LIB_WITH_FINAL_PREFIX([
+          eval additional_includedir=\"$includedir\"
+          eval additional_libdir=\"$libdir\"
+        ])
+      else
+        additional_includedir="$withval/include"
+        additional_libdir="$withval/$acl_libdirstem"
+      fi
+    fi
+])
+  if test $use_additional = yes; then
+    dnl Potentially add $additional_includedir to $CPPFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/include,
+    dnl   2. if it's already present in $CPPFLAGS,
+    dnl   3. if it's /usr/local/include and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_includedir" != "X/usr/include"; then
+      haveit=
+      for x in $CPPFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-I$additional_includedir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_includedir" = "X/usr/local/include"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_includedir"; then
+            dnl Really add $additional_includedir to $CPPFLAGS.
+            CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+          fi
+        fi
+      fi
+    fi
+    dnl Potentially add $additional_libdir to $LDFLAGS.
+    dnl But don't add it
+    dnl   1. if it's the standard /usr/lib,
+    dnl   2. if it's already present in $LDFLAGS,
+    dnl   3. if it's /usr/local/lib and we are using GCC on Linux,
+    dnl   4. if it doesn't exist as a directory.
+    if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+      haveit=
+      for x in $LDFLAGS; do
+        AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+        if test "X$x" = "X-L$additional_libdir"; then
+          haveit=yes
+          break
+        fi
+      done
+      if test -z "$haveit"; then
+        if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+          if test -n "$GCC"; then
+            case $host_os in
+              linux*) haveit=yes;;
+            esac
+          fi
+        fi
+        if test -z "$haveit"; then
+          if test -d "$additional_libdir"; then
+            dnl Really add $additional_libdir to $LDFLAGS.
+            LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+          fi
+        fi
+      fi
+    fi
+  fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+  dnl Unfortunately, prefix and exec_prefix get only finally determined
+  dnl at the end of configure.
+  if test "X$prefix" = "XNONE"; then
+    acl_final_prefix="$ac_default_prefix"
+  else
+    acl_final_prefix="$prefix"
+  fi
+  if test "X$exec_prefix" = "XNONE"; then
+    acl_final_exec_prefix='${prefix}'
+  else
+    acl_final_exec_prefix="$exec_prefix"
+  fi
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+  prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+  acl_save_prefix="$prefix"
+  prefix="$acl_final_prefix"
+  acl_save_exec_prefix="$exec_prefix"
+  exec_prefix="$acl_final_exec_prefix"
+  $1
+  exec_prefix="$acl_save_exec_prefix"
+  prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_PREPARE_MULTILIB creates
+dnl - a variable acl_libdirstem, containing the basename of the libdir, either
+dnl   "lib" or "lib64" or "lib/64",
+dnl - a variable acl_libdirstem2, as a secondary possible value for
+dnl   acl_libdirstem, either the same as acl_libdirstem or "lib/sparcv9" or
+dnl   "lib/amd64".
+AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
+[
+  dnl There is no formal standard regarding lib and lib64.
+  dnl On glibc systems, the current practice is that on a system supporting
+  dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+  dnl $prefix/lib64 and 32-bit libraries go under $prefix/lib. We determine
+  dnl the compiler's default mode by looking at the compiler's library search
+  dnl path. If at least one of its elements ends in /lib64 or points to a
+  dnl directory whose absolute pathname ends in /lib64, we assume a 64-bit ABI.
+  dnl Otherwise we use the default, namely "lib".
+  dnl On Solaris systems, the current practice is that on a system supporting
+  dnl 32-bit and 64-bit instruction sets or ABIs, 64-bit libraries go under
+  dnl $prefix/lib/64 (which is a symlink to either $prefix/lib/sparcv9 or
+  dnl $prefix/lib/amd64) and 32-bit libraries go under $prefix/lib.
+  AC_REQUIRE([AC_CANONICAL_HOST])
+  AC_REQUIRE([gl_HOST_CPU_C_ABI_32BIT])
+
+  case "$host_os" in
+    solaris*)
+      AC_CACHE_CHECK([for 64-bit host], [gl_cv_solaris_64bit],
+        [AC_COMPILE_IFELSE(
+           [AC_LANG_SOURCE(
+              [[#ifdef _LP64
+                 int ok;
+                #else
+                 error fail
+                #endif
+              ]])],
+           [gl_cv_solaris_64bit=yes],
+           [gl_cv_solaris_64bit=no])
+        ]);;
+  esac
+
+  dnl Allow the user to override the result by setting acl_cv_libdirstems.
+  AC_CACHE_CHECK([for the common suffixes of directories in the library search path],
+    [acl_cv_libdirstems],
+    [acl_libdirstem=lib
+     acl_libdirstem2=
+     case "$host_os" in
+       solaris*)
+         dnl See Solaris 10 Software Developer Collection > Solaris 64-bit Developer's Guide > The Development Environment
+         dnl <https://docs.oracle.com/cd/E19253-01/816-5138/dev-env/index.html>.
+         dnl "Portable Makefiles should refer to any library directories using the 64 symbolic link."
+         dnl But we want to recognize the sparcv9 or amd64 subdirectory also if the
+         dnl symlink is missing, so we set acl_libdirstem2 too.
+         if test $gl_cv_solaris_64bit = yes; then
+           acl_libdirstem=lib/64
+           case "$host_cpu" in
+             sparc*)        acl_libdirstem2=lib/sparcv9 ;;
+             i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+           esac
+         fi
+         ;;
+       *)
+         dnl If $CC generates code for a 32-bit ABI, the libraries are
+         dnl surely under $prefix/lib, not $prefix/lib64.
+         if test "$HOST_CPU_C_ABI_32BIT" != yes; then
+           dnl The result is a property of the system. However, non-system
+           dnl compilers sometimes have odd library search paths. Therefore
+           dnl prefer asking /usr/bin/gcc, if available, rather than $CC.
+           searchpath=`(if test -f /usr/bin/gcc \
+                           && LC_ALL=C /usr/bin/gcc -print-search-dirs >/dev/null 2>/dev/null; then \
+                          LC_ALL=C /usr/bin/gcc -print-search-dirs; \
+                        else \
+                          LC_ALL=C $CC -print-search-dirs; \
+                        fi) 2>/dev/null \
+                       | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+           if test -n "$searchpath"; then
+             acl_save_IFS="${IFS= 	}"; IFS=":"
+             for searchdir in $searchpath; do
+               if test -d "$searchdir"; then
+                 case "$searchdir" in
+                   */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+                   */../ | */.. )
+                     # Better ignore directories of this form. They are misleading.
+                     ;;
+                   *) searchdir=`cd "$searchdir" && pwd`
+                      case "$searchdir" in
+                        */lib64 ) acl_libdirstem=lib64 ;;
+                      esac ;;
+                 esac
+               fi
+             done
+             IFS="$acl_save_IFS"
+           fi
+         fi
+         ;;
+     esac
+     test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
+     acl_cv_libdirstems="$acl_libdirstem,$acl_libdirstem2"
+    ])
+  # Decompose acl_cv_libdirstems into acl_libdirstem and acl_libdirstem2.
+  acl_libdirstem=`echo "$acl_cv_libdirstems" | sed -e 's/,.*//'`
+  acl_libdirstem2=`echo "$acl_cv_libdirstems" | sed -e '/,/s/.*,//'`
+])
diff -Naurp dpkg-1.20.7.1-orig/m4/libtool.m4 dpkg-1.20.7.1/m4/libtool.m4
--- dpkg-1.20.7.1-orig/m4/libtool.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/libtool.m4	2021-06-09 18:22:56.578289645 -0500
@@ -0,0 +1,8369 @@
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the  same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+])
+
+# serial 58 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+       [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\	*)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS=$ltmain
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun([_LT_PREPARE_CC_BASENAME], [
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+    for cc_temp in @S|@*""; do
+      case $cc_temp in
+        compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+        distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+        \-*) ;;
+        *) break;;
+      esac
+    done
+    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+])# _LT_PREPARE_CC_BASENAME
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
+m4_defun([_LT_CC_BASENAME],
+[m4_require([_LT_PREPARE_CC_BASENAME])dnl
+AC_REQUIRE([_LT_DECL_SED])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+m4_require([_LT_CMD_TRUNCATE])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options that allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}"; then
+   setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}"; then
+   setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test set != "${COLLECT_NAMES+set}"; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+old_CC=$CC
+old_CFLAGS=$CFLAGS
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    _LT_PATH_MAGIC
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from 'configure', and 'config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain=$ac_aux_dir/ltmain.sh
+])# _LT_PROG_LTMAIN
+
+
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the 'libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags='_LT_TAGS'dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable.  If COMMENT is supplied, it is inserted after the
+# '#!' sequence but before initialization text begins.  After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script.  The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test 0 = "$lt_write_fail" && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+'$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test 0 != $[#]
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try '$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try '$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
+
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test yes = "$silent" &&
+  lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options that allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}"; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile=${ofile}T
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+    cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test set != "${COLLECT_NAMES+set}"; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+  _LT_PROG_LTMAIN
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],			[_LT_LANG(C)],
+  [C++],		[_LT_LANG(CXX)],
+  [Go],			[_LT_LANG(GO)],
+  [Java],		[_LT_LANG(GCJ)],
+  [Fortran 77],		[_LT_LANG(F77)],
+  [Fortran],		[_LT_LANG(FC)],
+  [Windows Resource],	[_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC],     [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+  fi
+fi
+if test -z "$GOC"; then
+  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+  [LT_LANG(GO)],
+  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "$LT_MULTI_MODULE"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi])
+
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS=$save_LDFLAGS
+    ])
+
+    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+      [lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[012]])
+      _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]][[,.]]*)
+	  _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test yes = "$lt_cv_apple_cc_single_mod"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test yes = "$lt_cv_ld_exported_symbols_list"; then
+      _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
+    fi
+    if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  if test yes = "$lt_cv_ld_force_load"; then
+    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+  else
+    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  fi
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
+  case $cc_basename in
+     ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test yes = "$_lt_dar_can_shared"; then
+    output_verbose_link_cmd=func_echo_all
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+    m4_if([$1], [CXX],
+[   if test yes != "$lt_cv_apple_cc_single_mod"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test set = "${lt_cv_aix_libpath+set}"; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+  lt_aix_libpath_sed='[
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }]'
+  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi],[])
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
+  fi
+  ])
+  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+case $ECHO in
+  printf*) AC_MSG_RESULT([printf]) ;;
+  print*) AC_MSG_RESULT([print -r]) ;;
+  *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test "X`printf %s $ECHO`" = "X$ECHO" \
+      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
+  [Search for dependent libraries within DIR (or the compiler's sysroot
+   if not specified).])],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted.  We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case $with_sysroot in #(
+ yes)
+   if test yes = "$GCC"; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   AC_MSG_RESULT([$with_sysroot])
+   AC_MSG_ERROR([The sysroot must be an absolute path.])
+   ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and where our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out what ABI is being produced by ac_compile, and set mode
+  # options accordingly.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE=32
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE=64
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    if test yes = "$lt_cv_prog_gnu_ld"; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+mips64*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    emul=elf
+    case `/usr/bin/file conftest.$ac_objext` in
+      *32-bit*)
+	emul="${emul}32"
+	;;
+      *64-bit*)
+	emul="${emul}64"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *MSB*)
+	emul="${emul}btsmip"
+	;;
+      *LSB*)
+	emul="${emul}ltsmip"
+	;;
+    esac
+    case `/usr/bin/file conftest.$ac_objext` in
+      *N32*)
+	emul="${emul}n32"
+	;;
+    esac
+    LD="${LD-ld} -m $emul"
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.  Note that the listed cases only cover the
+  # situations where additional linker options are needed (such as when
+  # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+  # vice versa); the common cases where no linker options are needed do
+  # not appear in the list.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    case `/usr/bin/file conftest.o` in
+	      *x86-64*)
+		LD="${LD-ld} -m elf32_x86_64"
+		;;
+	      *)
+		LD="${LD-ld} -m elf_i386"
+		;;
+	    esac
+	    ;;
+	  powerpc64le-*linux*)
+	    LD="${LD-ld} -m elf32lppclinux"
+	    ;;
+	  powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  powerpcle-*linux*)
+	    LD="${LD-ld} -m elf64lppc"
+	    ;;
+	  powerpc-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS=$CFLAGS
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test yes != "$lt_cv_cc_needs_belf"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS=$SAVE_CFLAGS
+  fi
+  ;;
+*-*solaris*)
+  # Find out what ABI is being produced by ac_compile, and set linker
+  # options accordingly.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*|x86_64-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD=${LD-ld}_sol2
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks=$enable_libtool_lock
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+  [lt_cv_ar_at_file=no
+   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+     [echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([lt_ar_try])
+      if test 0 -eq "$ac_status"; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	AC_TRY_EVAL([lt_ar_try])
+	if test 0 -ne "$ac_status"; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+     ])
+  ])
+
+if test no = "$lt_cv_ar_at_file"; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+  [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  bitrig* | openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+    [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"  ## exclude from sc_useless_quotes_in_assignment
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       $2=yes
+     fi
+   fi
+   $RM conftest*
+])
+
+if test yes = "[$]$2"; then
+    m4_if([$5], , :, [$5])
+else
+    m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS=$LDFLAGS
+   LDFLAGS="$LDFLAGS $3"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
+     else
+       $2=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS=$save_LDFLAGS
+])
+
+if test yes = "[$]$2"; then
+    m4_if([$4], , :, [$4])
+else
+    m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring=ABCD
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len" && \
+       test undefined != "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test X`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test 17 != "$i" # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+])
+if test -n "$lt_cv_sys_max_cmd_len"; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test yes = "$cross_compiling"; then :
+  [$4]
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}]
+_LT_EOF
+  if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_dlunknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test yes != "$enable_dlopen"; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen=load_add_on
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen=LoadLibrary
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+    # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
+    lt_cv_dlopen=dyld
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+    ;;
+
+  tpf*)
+    # Don't try to run any link tests for TPF.  We know it's impossible
+    # because TPF is a cross-compiler, and we know how we open DSOs.
+    lt_cv_dlopen=dlopen
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=no
+    ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+	  [lt_cv_dlopen=shl_load],
+      [AC_CHECK_LIB([dld], [shl_load],
+	    [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen=dlopen],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
+	      ])
+	    ])
+	  ])
+	])
+      ])
+    ;;
+  esac
+
+  if test no = "$lt_cv_dlopen"; then
+    enable_dlopen=no
+  else
+    enable_dlopen=yes
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS=$CPPFLAGS
+    test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS=$LDFLAGS
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS=$LIBS
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test yes = "$lt_cv_dlopen_self"; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS=$save_CPPFLAGS
+    LDFLAGS=$save_LDFLAGS
+    LIBS=$save_LIBS
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test no = "$hard_links"; then
+    AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
+  [Define to the sub-directory where libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
+
+  # We can hardcode non-existent directories.
+  if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+     test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_TAGVAR(hardcode_action, $1)=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_TAGVAR(hardcode_action, $1)=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+   test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+     test no = "$enable_shared"; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP"; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+    fi
+    ;;
+  *)
+    AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
+[[# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+#       string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+#       string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+#       "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+#       VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+    case x@S|@2 in
+    x)
+        ;;
+    *:)
+        eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+        ;;
+    x:*)
+        eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+        ;;
+    *::*)
+        eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+        eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+        ;;
+    *)
+        eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+        ;;
+    esac
+}
+]])# _LT_PREPARE_PATH_LIST
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+	[], [
+if test yes = "$GCC"; then
+  case $host_os in
+    darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+    *) lt_awk_arg='/^libraries:/' ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
+    *) lt_sed_strip_eq='s|=/|/|g' ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary...
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  # ...but if some path component already ends with the multilib dir we assume
+  # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+  case "$lt_multi_os_dir; $lt_search_path_spec " in
+  "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+    lt_multi_os_dir=
+    ;;
+  esac
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+    elif test -n "$lt_multi_os_dir"; then
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS = " "; FS = "/|\n";} {
+  lt_foo = "";
+  lt_count = 0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo = "/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
+[User-defined run-time library search path.])
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='$libname$release$shared_ext$major'
+  ;;
+
+aix[[4-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test ia64 = "$host_cpu"; then
+    # AIX 5 supports IA64
+    library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line '#! .'.  This would cause the generated library to
+    # depend on '.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # Using Import Files as archive members, it is possible to support
+    # filename-based versioning of shared library archives on AIX. While
+    # this would work for both with and without runtime linking, it will
+    # prevent static linking of such archives. So we do filename-based
+    # shared library versioning with .so extension only, which is used
+    # when both runtime linking and shared linking is enabled.
+    # Unfortunately, runtime linking may impact performance, so we do
+    # not want this to be the default eventually. Also, we use the
+    # versioned .so libs for executables only if there is the -brtl
+    # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+    # To allow for filename-based versioning support, we need to create
+    # libNAME.so.V as an archive file, containing:
+    # *) an Import File, referring to the versioned filename of the
+    #    archive as well as the shared archive member, telling the
+    #    bitwidth (32 or 64) of that shared object, and providing the
+    #    list of exported symbols of that shared object, eventually
+    #    decorated with the 'weak' keyword
+    # *) the shared object with the F_LOADONLY flag set, to really avoid
+    #    it being seen by the linker.
+    # At run time we better use the real file rather than another symlink,
+    # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+    case $with_aix_soname,$aix_use_runtimelinking in
+    # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    aix,yes) # traditional libtool
+      dynamic_linker='AIX unversionable lib.so'
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      ;;
+    aix,no) # traditional AIX only
+      dynamic_linker='AIX lib.a[(]lib.so.V[)]'
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      ;;
+    svr4,*) # full svr4 only
+      dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,yes) # both, prefer svr4
+      dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
+      library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+      # unpreferred sharedlib libNAME.a needs extra handling
+      postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+      postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+      # We do not specify a path in Import Files, so LIBPATH fires.
+      shlibpath_overrides_runpath=yes
+      ;;
+    *,no) # both, prefer aix
+      dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
+      library_names_spec='$libname$release.a $libname.a'
+      soname_spec='$libname$release$shared_ext$major'
+      # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+      postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+      postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+      ;;
+    esac
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='$libname$shared_ext'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[[45]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+m4_if([$1], [],[
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+    library_names_spec='$libname.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec=$LIB
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \$file`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$major$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[23]].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+      soname_spec='$libname$release$shared_ext$major'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    if test 32 = "$HPUX_IA64_MODE"; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+      sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+    fi
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[[3-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test yes = "$lt_cv_prog_gnu_ld"; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+  sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+linux*android*)
+  version_type=none # Android doesn't support versioned libraries.
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext'
+  soname_spec='$libname$release$shared_ext'
+  finish_cmds=
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  dynamic_linker='Android linker'
+  # Don't embed -rpath directories since the linker doesn't support them.
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+    [lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+	 [lt_cv_shlibpath_overrides_runpath=yes])])
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+    ])
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Ideally, we could use ldconfig to report *all* directores which are
+  # searched for libraries, however this is still not possible.  Aside from not
+  # being certain /sbin/ldconfig is available, command
+  # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+  # even though it is searched at run-time.  Try to do the best guess by
+  # appending ld.so.conf contents (and includes) to the search path.
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+    soname_spec='$libname$release$shared_ext$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd* | bitrig*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec=/usr/lib
+  need_lib_prefix=no
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    need_version=no
+  else
+    need_version=yes
+  fi
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+os2*)
+  libname_spec='$name'
+  version_type=windows
+  shrext_cmds=.dll
+  need_version=no
+  need_lib_prefix=no
+  # OS/2 can only load a DLL with a base name of 8 characters or less.
+  soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+    v=$($ECHO $release$versuffix | tr -d .-);
+    n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+    $ECHO $n$v`$shared_ext'
+  library_names_spec='${libname}_dll.$libext'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=BEGINLIBPATH
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  postinstall_cmds='base_file=`basename \$file`~
+    dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+    dldir=$destdir/`dirname \$dlpath`~
+    test -d \$dldir || mkdir -p \$dldir~
+    $install_prog $dir/$dlname \$dldir/$dlname~
+    chmod a+x \$dldir/$dlname~
+    if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+      eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+    fi'
+  postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+    dlpath=$dir/\$dldll~
+    $RM \$dlpath'
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='$libname$release$shared_ext$major'
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test yes = "$with_gnu_ld"; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec; then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+    soname_spec='$libname$shared_ext.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=sco
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test yes = "$with_gnu_ld"; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+  soname_spec='$libname$release$shared_ext$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+  sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+  sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+    [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
+    [Detected run-time system search path for libraries])
+_LT_DECL([], [configure_time_lt_sys_library_path], [2],
+    [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program that can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD=$MAGIC_CMD
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$1"; then
+      lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS=$lt_save_ifs
+  MAGIC_CMD=$lt_save_MAGIC_CMD
+  ;;
+esac])
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program that can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test no = "$withval" || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test yes = "$GCC"; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return, which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD=$ac_prog
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test yes = "$with_gnu_ld"; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS=$lt_save_ifs
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD=$ac_dir/$ac_prog
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test no != "$with_gnu_ld" && break
+	;;
+      *)
+	test yes != "$with_gnu_ld" && break
+	;;
+      esac
+    fi
+  done
+  IFS=$lt_save_ifs
+else
+  lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi])
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test yes != "$GCC"; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test yes = "$GCC"; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_PATH_DD
+# -----------
+# find a working dd
+m4_defun([_LT_PATH_DD],
+[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
+[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi])
+rm -f conftest.i conftest2.i conftest.out])
+])# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun([_LT_CMD_TRUNCATE],
+[m4_require([_LT_PATH_DD])
+AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+  cmp -s conftest.i conftest.out \
+  && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
+_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
+  [Command to truncate a binary pipe])
+])# _LT_CMD_TRUNCATE
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# 'unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[[45]]*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[[3-9]]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd* | bitrig*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+os2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+    [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+    [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+    [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM=$NM
+else
+  lt_nm_to_check=${ac_tool_prefix}nm
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS=$lt_save_ifs
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm=$ac_dir/$lt_tmp_nm
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the 'sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	# MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+	case $build_os in
+	mingw*) lt_bad_file=conftest.nm/nofile ;;
+	*) lt_bad_file=/dev/null ;;
+	esac
+	case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+	*$lt_bad_file* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break 2
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break 2
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS=$lt_save_ifs
+  done
+  : ${lt_cv_path_NM=no}
+fi])
+if test no != "$lt_cv_path_NM"; then
+  NM=$lt_cv_path_NM
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+    case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols -headers"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+  AC_SUBST([DUMPBIN])
+  if test : != "$DUMPBIN"; then
+    NM=$DUMPBIN
+  fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+  [lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+  cat conftest.out >&AS_MESSAGE_LOG_FD
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh;
+  # decide which one to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd=$ECHO
+  ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+    [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+  [lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*])
+if test yes != "$lt_cv_path_mainfest_tool"; then
+  MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# _LT_DLL_DEF_P([FILE])
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN([_LT_DLL_DEF_P],
+[dnl
+  test DEF = "`$SED -n dnl
+    -e '\''s/^[[	 ]]*//'\'' dnl Strip leading whitespace
+    -e '\''/^\(;.*\)*$/d'\'' dnl      Delete empty lines and comments
+    -e '\''s/^\(EXPORTS\|LIBRARY\)\([[	 ]].*\)*$/DEF/p'\'' dnl
+    -e q dnl                          Only consider the first "real" line
+    $1`" dnl
+])# _LT_DLL_DEF_P
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM=-lm)
+  ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test yes = "$GCC"; then
+  case $cc_basename in
+  nvcc*)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+  esac
+
+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*)
+  if test ia64 = "$host_cpu"; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  # Gets list of data symbols to import.
+  lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+  # Adjust the below global symbol transforms to fixup imported variables.
+  lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+  lt_c_name_hook=" -e 's/^I .* \(.*\)$/  {\"\1\", (void *) 0},/p'"
+  lt_c_name_lib_hook="\
+  -e 's/^I .* \(lib.*\)$/  {\"\1\", (void *) 0},/p'\
+  -e 's/^I .* \(.*\)$/  {\"lib\1\", (void *) 0},/p'"
+else
+  # Disable hooks by default.
+  lt_cv_sys_global_symbol_to_import=
+  lt_cdecl_hook=
+  lt_c_name_hook=
+  lt_c_name_lib_hook=
+fi
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/  {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/  {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/  {\"lib\1\", (void *) \&\1},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function,
+    # D for any global variable and I for any imported variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+"     /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+"     /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+"     {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+"     s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT@&t@_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data.  */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT@&t@_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* .* \(.*\)$/  {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS=conftstm.$ac_objext
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test yes = "$pipe_works"; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+    [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+    [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
+    [Transform the output of nm into a list of symbols to manually relocate])
+_LT_DECL([global_symbol_to_c_name_address],
+    [lt_cv_sys_global_symbol_to_c_name_address], [1],
+    [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+    [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
+    [The name lister interface])
+_LT_DECL([], [nm_file_list_spec], [1],
+    [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+  # C++ specific cases for pic, static, wl, etc.
+  if test yes = "$GXX"; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[[4-9]]*)
+	# All AIX code is PIC.
+	if test ia64 = "$host_cpu"; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	m4_if([$1], [GCJ], [],
+	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+	    if test ia64 != "$host_cpu"; then
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64, which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+    esac
+  fi
+],
+[
+  if test yes = "$GCC"; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the '-m68020' flag to GCC prevents building anything better,
+            # like '-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test ia64 = "$host_cpu"; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      case $cc_basename in
+      nagfor*)
+        # NAG Fortran compiler
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      esac
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      case $host_os in
+      os2*)
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+	;;
+      esac
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+      case $cc_basename in
+      # old Intel for x86_64, which still supported -KPIC.
+      ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	;;
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+        *Intel*\ [[CF]]*Compiler*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	  ;;
+	*Portland\ Group*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    rdos*)
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+case $host_os in
+  # For platforms that do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  case $host_os in
+  aix[[4-9]]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+    # Without the "-l" option, or with the "-B" option, AIX nm treats
+    # weak defined symbols like other global defined symbols, whereas
+    # GNU nm marks them as "W".
+    # While the 'weak' keyword is ignored in the Export File, we need
+    # it in the Import File for the 'aix-soname' feature, so we have
+    # to replace the "-B" option with "-P" for AIX nm.
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
+    ;;
+  cygwin* | mingw* | cegcc*)
+    case $cc_basename in
+    cl*)
+      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+      ;;
+    esac
+    ;;
+  *)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    ;;
+  esac
+], [
+  runpath_var=
+  _LT_TAGVAR(allow_undefined_flag, $1)=
+  _LT_TAGVAR(always_export_symbols, $1)=no
+  _LT_TAGVAR(archive_cmds, $1)=
+  _LT_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_TAGVAR(compiler_needs_object, $1)=no
+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(hardcode_automatic, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(inherit_rpath, $1)=no
+  _LT_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_TAGVAR(module_cmds, $1)=
+  _LT_TAGVAR(module_expsym_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ' (' and ')$', so one must not match beginning or
+  # end of line.  Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+  # as well as any symbol that contains 'd'.
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test yes != "$GCC"; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd* | bitrig*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  _LT_TAGVAR(ld_shlibs, $1)=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test yes = "$with_gnu_ld"; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test yes = "$lt_use_gnu_ld_interface"; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='$wl'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+    else
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[[3-9]]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test ia64 != "$host_cpu"; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=no
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file, use it as
+	# is; otherwise, prepend EXPORTS...
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+          cp $export_symbols $output_objdir/$soname.def;
+        else
+          echo EXPORTS > $output_objdir/$soname.def;
+          cat $export_symbols >> $output_objdir/$soname.def;
+        fi~
+        $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    haiku*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      shrext_cmds=.dll
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
+
+    interix[[3-9]]*)
+      _LT_TAGVAR(hardcode_direct, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test linux-dietlibc = "$host_os"; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test no = "$tmp_diet"
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+        nagfor*)                        # NAGFOR 5.3
+          tmp_sharedflag='-Wl,-shared' ;;
+	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+
+        if test yes = "$supports_anon_versioning"; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+            cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+            echo "local: *; };" >> $output_objdir/$libname.ver~
+            $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	tcc*)
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+	  ;;
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test yes = "$supports_anon_versioning"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+              cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+              echo "local: *; };" >> $output_objdir/$libname.ver~
+              $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        _LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
+      runpath_var=
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
+
+    aix[[4-9]]*)
+      if test ia64 = "$host_cpu"; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to GNU nm, but means don't demangle to AIX nm.
+	# Without the "-l" option, or with the "-B" option, AIX nm treats
+	# weak defined symbols like other global defined symbols, whereas
+	# GNU nm marks them as "W".
+	# While the 'weak' keyword is ignored in the Export File, we need
+	# it in the Import File for the 'aix-soname' feature, so we have
+	# to replace the "-B" option with "-P" for AIX nm.
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# have runtime linking enabled, and use it for executables.
+	# For shared libraries, we enable/disable runtime linking
+	# depending on the kind of the shared library created -
+	# when "with_aix_soname,aix_use_runtimelinking" is:
+	# "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "aix,yes"  lib.so          shared, rtl:yes, for executables
+	#            lib.a           static archive
+	# "both,no"  lib.so.V(shr.o) shared, rtl:yes
+	#            lib.a(lib.so.V) shared, rtl:no,  for executables
+	# "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a(lib.so.V) shared, rtl:no
+	# "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+	#            lib.a           static archive
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	    # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	    # so we don't have lib.a shared libs to link our executables.
+	    # We have to force runtime linking in this case.
+	    aix_use_runtimelinking=yes
+	    LDFLAGS="$LDFLAGS -Wl,-brtl"
+	  fi
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_TAGVAR(archive_cmds, $1)=''
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+      case $with_aix_soname,$aix_use_runtimelinking in
+      aix,*) ;; # traditional, no import file
+      svr4,* | *,yes) # use import file
+	# The Import File defines what to hardcode.
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+	;;
+      esac
+
+      if test yes = "$GCC"; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`$CC -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test yes = "$aix_use_runtimelinking"; then
+	  shared_flag="$shared_flag "'$wl-G'
+	fi
+	# Need to ensure runtime linking is disabled for the traditional
+	# shared library, or the linker may eventually find shared libraries
+	# /with/ Import File - we do not want to mix them.
+	shared_flag_aix='-shared'
+	shared_flag_svr4='-shared $wl-G'
+      else
+	# not using gcc
+	if test ia64 = "$host_cpu"; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag='$wl-G'
+	  else
+	    shared_flag='$wl-bM:SRE'
+	  fi
+	  shared_flag_aix='$wl-bM:SRE'
+	  shared_flag_svr4='$wl-G'
+	fi
+      fi
+
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        _LT_SYS_MODULE_PATH_AIX([$1])
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+      else
+	if test ia64 = "$host_cpu"; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX([$1])
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+	  if test yes = "$with_gnu_ld"; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  fi
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	  # -brtl affects multiple linker settings, -berok does not and is overridden later
+	  compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+	  if test svr4 != "$with_aix_soname"; then
+	    # This is similar to how AIX traditionally builds its shared libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	  fi
+	  if test aix != "$with_aix_soname"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	  else
+	    # used by -dlpreopen to get the symbols
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	  fi
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[[45]]*)
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	_LT_TAGVAR(always_export_symbols, $1)=yes
+	_LT_TAGVAR(file_list_spec, $1)='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=.dll
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+            cp "$export_symbols" "$output_objdir/$soname.def";
+            echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+          else
+            $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+          fi~
+          $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+          linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+          lt_tool_outputfile="@TOOL_OUTPUT@"~
+          case $lt_outputfile in
+            *.exe|*.EXE) ;;
+            *)
+              lt_outputfile=$lt_outputfile.exe
+              lt_tool_outputfile=$lt_tool_outputfile.exe
+              ;;
+          esac~
+          if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+            $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+            $RM "$lt_outputfile.manifest";
+          fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=.dll
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	# FIXME: Should let the user specify the lib program.
+	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+      _LT_DARWIN_LINKER_FEATURES($1)
+      ;;
+
+    dgux*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    hpux9*)
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+      ;;
+
+    hpux10*)
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test no = "$with_gnu_ld"; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test yes,no = "$GCC,$with_gnu_ld"; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	m4_if($1, [], [
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  _LT_LINKER_OPTION([if $CC understands -b],
+	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+	  ;;
+	esac
+      fi
+      if test no = "$with_gnu_ld"; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+	  [lt_cv_irix_exported_symbol],
+	  [save_LDFLAGS=$LDFLAGS
+	   LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
+	   AC_LINK_IFELSE(
+	     [AC_LANG_SOURCE(
+	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+			      [C++], [[int foo (void) { return 0; }]],
+			      [Fortran 77], [[
+      subroutine foo
+      end]],
+			      [Fortran], [[
+      subroutine foo
+      end]])])],
+	      [lt_cv_irix_exported_symbol=yes],
+	      [lt_cv_irix_exported_symbol=no])
+           LDFLAGS=$save_LDFLAGS])
+	if test yes = "$lt_cv_irix_exported_symbol"; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
+	fi
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(inherit_rpath, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    linux*)
+      case $cc_basename in
+      tcc*)
+	# Fabrice Bellard et al's Tiny C Compiler
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      esac
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd* | bitrig*)
+      if test -f /usr/libexec/ld.so; then
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+	else
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	fi
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      shrext_cmds=.dll
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	$ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	$ECHO EXPORTS >> $output_objdir/$libname.def~
+	prefix_cmds="$SED"~
+	if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	  prefix_cmds="$prefix_cmds -e 1d";
+	fi~
+	prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	$CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	emximp -o $lib $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
+
+    osf3*)
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+          $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+      if test yes = "$GCC"; then
+	wlarc='$wl'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+          $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+            $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='$wl'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+            $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands '-z linker_flag'.  GCC discards it without '$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test yes = "$GCC"; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+	else
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test sequent = "$host_vendor"; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We CANNOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test yes = "$GCC"; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+
+    if test sni = "$host_vendor"; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+    [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test yes,yes = "$GCC,$enable_shared"; then
+    case $_LT_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+	[$RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+	  _LT_TAGVAR(allow_undefined_flag, $1)=
+	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+	  then
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	  else
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  fi
+	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+	])
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+    [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+    [enable_shared_with_static_runtimes], [0],
+    [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+    [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+    [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+    [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+    [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+    [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+    [Commands used to build a loadable module if different from building
+    a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+    [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+    [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+    [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+    [Flag to hardcode $libdir into a binary during linking.
+    This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+    [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+    [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+    DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+    [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+    DIR into the resulting binary and the resulting library dependency is
+    "absolute", i.e impossible to change by setting $shlibpath_var if the
+    library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+    [Set to "yes" if building a shared library automatically hardcodes DIR
+    into the library and all subsequent libraries and executables linked
+    against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+    [Set to yes if linker adds runtime paths of dependent libraries
+    to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+    [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+    [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+    [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+    [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+    [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+    [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+    [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+    [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC=$CC
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_SYS_DYNAMIC_LINKER($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+  LT_SYS_DLOPEN_SELF
+  _LT_CMD_STRIPLIB
+
+  # Report what library types will actually be built
+  AC_MSG_CHECKING([if libtool supports shared libraries])
+  AC_MSG_RESULT([$can_build_shared])
+
+  AC_MSG_CHECKING([whether to build shared libraries])
+  test no = "$can_build_shared" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test yes = "$enable_shared" && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[[4-9]]*)
+    if test ia64 != "$host_cpu"; then
+      case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+      yes,aix,yes) ;;			# shared object as lib.so file only
+      yes,svr4,*) ;;			# shared object as lib.so archive member only
+      yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+      esac
+    fi
+    ;;
+  esac
+  AC_MSG_RESULT([$enable_shared])
+
+  AC_MSG_CHECKING([whether to build static libraries])
+  # Make sure either enable_shared or enable_static is yes.
+  test yes = "$enable_shared" || enable_static=yes
+  AC_MSG_RESULT([$enable_static])
+
+  _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC=$lt_save_CC
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test no != "$CXX" &&
+    ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+    (test g++ != "$CXX"))); then
+  AC_PROG_CXXCPP
+else
+  _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_caught_CXX_error"; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test yes = "$GXX"; then
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+    else
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+    fi
+
+    if test yes = "$GXX"; then
+      # Set up default GNU C++ configuration
+
+      LT_PATH_LD
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test yes = "$with_gnu_ld"; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='$wl'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+        else
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+    _LT_TAGVAR(ld_shlibs, $1)=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aix[[4-9]]*)
+        if test ia64 = "$host_cpu"; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # have runtime linking enabled, and use it for executables.
+          # For shared libraries, we enable/disable runtime linking
+          # depending on the kind of the shared library created -
+          # when "with_aix_soname,aix_use_runtimelinking" is:
+          # "aix,no"   lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "aix,yes"  lib.so          shared, rtl:yes, for executables
+          #            lib.a           static archive
+          # "both,no"  lib.so.V(shr.o) shared, rtl:yes
+          #            lib.a(lib.so.V) shared, rtl:no,  for executables
+          # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a(lib.so.V) shared, rtl:no
+          # "svr4,*"   lib.so.V(shr.o) shared, rtl:yes, for executables
+          #            lib.a           static archive
+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+	      # With aix-soname=svr4, we create the lib.so.V shared archives only,
+	      # so we don't have lib.a shared libs to link our executables.
+	      # We have to force runtime linking in this case.
+	      aix_use_runtimelinking=yes
+	      LDFLAGS="$LDFLAGS -Wl,-brtl"
+	    fi
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        _LT_TAGVAR(archive_cmds, $1)=''
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+        case $with_aix_soname,$aix_use_runtimelinking in
+        aix,*) ;;	# no import file
+        svr4,* | *,yes) # use import file
+          # The Import File defines what to hardcode.
+          _LT_TAGVAR(hardcode_direct, $1)=no
+          _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+          ;;
+        esac
+
+        if test yes = "$GXX"; then
+          case $host_os in aix4.[[012]]|aix4.[[012]].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`$CC -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test yes = "$aix_use_runtimelinking"; then
+	    shared_flag=$shared_flag' $wl-G'
+	  fi
+	  # Need to ensure runtime linking is disabled for the traditional
+	  # shared library, or the linker may eventually find shared libraries
+	  # /with/ Import File - we do not want to mix them.
+	  shared_flag_aix='-shared'
+	  shared_flag_svr4='-shared $wl-G'
+        else
+          # not using gcc
+          if test ia64 = "$host_cpu"; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test yes = "$aix_use_runtimelinking"; then
+	      shared_flag='$wl-G'
+	    else
+	      shared_flag='$wl-bM:SRE'
+	    fi
+	    shared_flag_aix='$wl-bM:SRE'
+	    shared_flag_svr4='$wl-G'
+          fi
+        fi
+
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        _LT_TAGVAR(always_export_symbols, $1)=yes
+	if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          # The "-G" linker flag allows undefined symbols.
+          _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          _LT_SYS_MODULE_PATH_AIX([$1])
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+        else
+          if test ia64 = "$host_cpu"; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX([$1])
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+	    if test yes = "$with_gnu_ld"; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    fi
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+	    # -brtl affects multiple linker settings, -berok does not and is overridden later
+	    compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+	    if test svr4 != "$with_aix_soname"; then
+	      # This is similar to how AIX traditionally builds its shared
+	      # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+	    fi
+	    if test aix != "$with_aix_soname"; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+	    else
+	      # used by -dlpreopen to get the symbols
+	      _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV  $output_objdir/$realname.d/$soname $output_objdir'
+	    fi
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=yes
+	  _LT_TAGVAR(file_list_spec, $1)='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=.dll
+	  # FIXME: Setting linknames here is a bad hack.
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+              cp "$export_symbols" "$output_objdir/$soname.def";
+              echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+            else
+              $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+            fi~
+            $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+            linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	  # Don't use ranlib
+	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+            lt_tool_outputfile="@TOOL_OUTPUT@"~
+            case $lt_outputfile in
+              *.exe|*.EXE) ;;
+              *)
+                lt_outputfile=$lt_outputfile.exe
+                lt_tool_outputfile=$lt_tool_outputfile.exe
+                ;;
+            esac~
+            func_to_tool_file "$lt_outputfile"~
+            if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+              $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+              $RM "$lt_outputfile.manifest";
+            fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=no
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file, use it as
+	    # is; otherwise, prepend EXPORTS...
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+              cp $export_symbols $output_objdir/$soname.def;
+            else
+              echo EXPORTS > $output_objdir/$soname.def;
+              cat $export_symbols >> $output_objdir/$soname.def;
+            fi~
+            $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	  ;;
+	esac
+	;;
+      darwin* | rhapsody*)
+        _LT_DARWIN_LINKER_FEATURES($1)
+	;;
+
+      os2*)
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	shrext_cmds=.dll
+	_LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+	  $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+	  $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+	  $ECHO EXPORTS >> $output_objdir/$libname.def~
+	  prefix_cmds="$SED"~
+	  if test EXPORTS = "`$SED 1q $export_symbols`"; then
+	    prefix_cmds="$prefix_cmds -e 1d";
+	  fi~
+	  prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+	  cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+	  $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+	  emximp -o $lib $output_objdir/$libname.def'
+	_LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      freebsd2.*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      freebsd-elf*)
+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+        ;;
+
+      haiku*)
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        ;;
+
+      hpux9*)
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            _LT_TAGVAR(ld_shlibs, $1)=no
+            ;;
+          aCC*)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            ;;
+          *)
+            if test yes = "$GXX"; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              _LT_TAGVAR(ld_shlibs, $1)=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test no = "$with_gnu_ld"; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            _LT_TAGVAR(hardcode_direct, $1)=no
+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+            ;;
+          *)
+            _LT_TAGVAR(hardcode_direct, $1)=yes
+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+          *)
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test yes = "$GXX"; then
+	      if test no = "$with_gnu_ld"; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+        esac
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(inherit_rpath, $1)=yes
+        ;;
+
+      linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+               rm -rf $tpldir~
+               $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+               compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+                $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+                $RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+                rm -rf $tpldir~
+                $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+                $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 and above use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname  -o $lib $wl-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    ;;
+	  xl* | mpixl* | bgxl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+	    if test yes = "$supports_anon_versioning"; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+                cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+                echo "local: *; };" >> $output_objdir/$libname.ver~
+                $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='func_echo_all'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
+
+      openbsd* | bitrig*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=func_echo_all
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+                  echo "-hidden">> $lib.exp~
+                  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+                  $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+	  *)
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+              $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands '-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+	    output_verbose_link_cmd='func_echo_all'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test yes,no = "$GXX,$with_gnu_ld"; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+                  $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require '-G' NOT '-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+                  $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      fi
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We CANNOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+              '"$_LT_TAGVAR(old_archive_cmds, $1)"
+	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+              '"$_LT_TAGVAR(reload_cmds, $1)"
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+
+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+    test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
+
+    _LT_TAGVAR(GCC, $1)=$GXX
+    _LT_TAGVAR(LD, $1)=$LD
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test yes != "$_lt_caught_CXX_error"
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+  case @S|@2 in
+  .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+  *)  func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
+  esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $prev$p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test x-L = "$p" ||
+          test x-R = "$p"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test no = "$pre_test_object_deps_done"; then
+	 case $prev in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)=$prev$p
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test no = "$pre_test_object_deps_done"; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)=$p
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)=$p
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_TAGVAR(predep_objects,$1)=
+  _LT_TAGVAR(postdep_objects,$1)=
+  _LT_TAGVAR(postdeps,$1)=
+  ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+    [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+    [Dependencies to place before and after the objects being linked to
+    create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+    [The library search path used internally by the compiler when linking
+    a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test no = "$F77"; then
+  _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_disable_F77"; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${F77-"f77"}
+  CFLAGS=$FFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+  GCC=$G77
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test no = "$can_build_shared" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test yes = "$enable_shared" && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test ia64 != "$host_cpu"; then
+	  case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+	  yes,aix,yes) ;;		# shared object as lib.so file only
+	  yes,svr4,*) ;;		# shared object as lib.so archive member only
+	  yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+	  esac
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test yes = "$enable_shared" || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)=$G77
+    _LT_TAGVAR(LD, $1)=$LD
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test no = "$FC"; then
+  _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_disable_FC"; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${FC-"f95"}
+  CFLAGS=$FCFLAGS
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test no = "$can_build_shared" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test yes = "$enable_shared" && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test ia64 != "$host_cpu"; then
+	  case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+	  yes,aix,yes) ;;		# shared object as lib.so file only
+	  yes,svr4,*) ;;		# shared object as lib.so archive member only
+	  yes,*) enable_static=no ;;	# shared object in lib.a archive as well
+	  esac
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test yes = "$enable_shared" || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+    _LT_TAGVAR(LD, $1)=$LD
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_FC"
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)=$LD
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)=$LD
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code=$lt_simple_compile_test_code
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+  :
+  _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+    [AC_CHECK_TOOL(GCJ, gcj,)
+      test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
+      AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f "$lt_ac_sed" && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test 10 -lt "$lt_ac_count" && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test "$lt_ac_count" -gt "$lt_ac_max"; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine what file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+         [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+         [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
diff -Naurp dpkg-1.20.7.1-orig/m4/lt~obsolete.m4 dpkg-1.20.7.1/m4/lt~obsolete.m4
--- dpkg-1.20.7.1-orig/m4/lt~obsolete.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/lt~obsolete.m4	2021-06-09 18:22:56.668289786 -0500
@@ -0,0 +1,99 @@
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+#
+#   Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+#   Foundation, Inc.
+#   Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else.  This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
diff -Naurp dpkg-1.20.7.1-orig/m4/ltoptions.m4 dpkg-1.20.7.1/m4/ltoptions.m4
--- dpkg-1.20.7.1-orig/m4/ltoptions.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/ltoptions.m4	2021-06-09 18:22:56.600289679 -0500
@@ -0,0 +1,437 @@
+# Helper functions for option handling.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+#   Foundation, Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 8 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+        _LT_MANGLE_DEFUN([$1], [$2]),
+    [m4_warning([Unknown $1 option '$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+		      [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME.  If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+    [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+  dnl
+  dnl Simply set some default values (i.e off) if boolean options were not
+  dnl specified:
+  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+  ])
+  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+  ])
+  dnl
+  dnl If no reference was made to various pairs of opposing options, then
+  dnl we run the default mode handler for the pair.  For example, if neither
+  dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
+  dnl archives by default:
+  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+		   [_LT_ENABLE_FAST_INSTALL])
+  _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
+		   [_LT_WITH_AIX_SONAME([aix])])
+  ])
+])# _LT_SET_OPTIONS
+
+
+## --------------------------------- ##
+## Macros to handle LT_INIT options. ##
+## --------------------------------- ##
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS],      [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac],
+    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+    _LT_DECL([build_libtool_libs], [enable_shared], [0],
+	[Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac],
+    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+    _LT_DECL([build_old_libs], [enable_static], [0],
+	[Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'.  If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for pkg in $enableval; do
+	IFS=$lt_save_ifs
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac],
+    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+	 [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the 'fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the 'disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_AIX_SONAME([DEFAULT])
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'.  If omitted, it defaults to `aix'.
+m4_define([_LT_WITH_AIX_SONAME],
+[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[[5-9]]*,yes)
+  AC_MSG_CHECKING([which variant of shared library versioning to provide])
+  AC_ARG_WITH([aix-soname],
+    [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
+      [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
+    [case $withval in
+    aix|svr4|both)
+      ;;
+    *)
+      AC_MSG_ERROR([Unknown argument to --with-aix-soname])
+      ;;
+    esac
+    lt_cv_with_aix_soname=$with_aix_soname],
+    [AC_CACHE_VAL([lt_cv_with_aix_soname],
+      [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
+    with_aix_soname=$lt_cv_with_aix_soname])
+  AC_MSG_RESULT([$with_aix_soname])
+  if test aix != "$with_aix_soname"; then
+    # For the AIX way of multilib, we name the shared archive member
+    # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+    # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+    # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+    # the AIX toolchain works better with OBJECT_MODE set (default 32).
+    if test 64 = "${OBJECT_MODE-32}"; then
+      shared_archive_member_spec=shr_64
+    else
+      shared_archive_member_spec=shr
+    fi
+  fi
+  ;;
+*)
+  with_aix_soname=aix
+  ;;
+esac
+
+_LT_DECL([], [shared_archive_member_spec], [0],
+    [Shared archive member basename, for filename based shared library versioning on AIX])dnl
+])# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
+# LT_INIT options.
+# MODE is either 'yes' or 'no'.  If omitted, it defaults to 'both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+      for lt_pkg in $withval; do
+	IFS=$lt_save_ifs
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS=$lt_save_ifs
+      ;;
+    esac],
+    [pic_mode=m4_default([$1], [default])])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+		 [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+		 [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+		 [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+		 [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+		 [m4_define([_LTDL_TYPE], [convenience])])
diff -Naurp dpkg-1.20.7.1-orig/m4/ltsugar.m4 dpkg-1.20.7.1/m4/ltsugar.m4
--- dpkg-1.20.7.1-orig/m4/ltsugar.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/ltsugar.m4	2021-06-09 18:22:56.622289714 -0500
@@ -0,0 +1,124 @@
+# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
+#
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
+# Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+       [$#], [2], [[$2]],
+       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59, which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+       [$#], 1, [],
+       [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+		 [lt_append([$1], [$2], [$3])$4],
+		 [$5])],
+	  [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+	[$5],
+    [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+  [lt_join(m4_quote(m4_default([$4], [[, ]])),
+           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
diff -Naurp dpkg-1.20.7.1-orig/m4/ltversion.m4 dpkg-1.20.7.1/m4/ltversion.m4
--- dpkg-1.20.7.1-orig/m4/ltversion.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/ltversion.m4	2021-06-09 18:22:56.645289750 -0500
@@ -0,0 +1,23 @@
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 4179 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.6])
+m4_define([LT_PACKAGE_REVISION], [2.4.6])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.6'
+macro_revision='2.4.6'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
diff -Naurp dpkg-1.20.7.1-orig/m4/nls.m4 dpkg-1.20.7.1/m4/nls.m4
--- dpkg-1.20.7.1-orig/m4/nls.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/nls.m4	2021-06-09 18:22:47.473275398 -0500
@@ -0,0 +1,32 @@
+# nls.m4 serial 5 (gettext-0.18)
+dnl Copyright (C) 1995-2003, 2005-2006, 2008-2014, 2016, 2019 Free Software
+dnl Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ([2.50])
+
+AC_DEFUN([AM_NLS],
+[
+  AC_MSG_CHECKING([whether NLS is requested])
+  dnl Default is enabled NLS
+  AC_ARG_ENABLE([nls],
+    [  --disable-nls           do not use Native Language Support],
+    USE_NLS=$enableval, USE_NLS=yes)
+  AC_MSG_RESULT([$USE_NLS])
+  AC_SUBST([USE_NLS])
+])
diff -Naurp dpkg-1.20.7.1-orig/m4/po.m4 dpkg-1.20.7.1/m4/po.m4
--- dpkg-1.20.7.1-orig/m4/po.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/po.m4	2021-06-09 18:22:47.473275398 -0500
@@ -0,0 +1,450 @@
+# po.m4 serial 30 (gettext-0.20)
+dnl Copyright (C) 1995-2014, 2016, 2018-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl   Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ([2.60])
+
+dnl Checks for all prerequisites of the po subdirectory.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+  AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+  AC_REQUIRE([AC_PROG_INSTALL])dnl
+  AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+  AC_REQUIRE([AC_PROG_SED])dnl
+  AC_REQUIRE([AM_NLS])dnl
+
+  dnl Release version of the gettext macros. This is used to ensure that
+  dnl the gettext macros and po/Makefile.in.in are in sync.
+  AC_SUBST([GETTEXT_MACRO_VERSION], [0.20])
+
+  dnl Perform the following tests also if --disable-nls has been given,
+  dnl because they are needed for "make dist" to work.
+
+  dnl Search for GNU msgfmt in the PATH.
+  dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+  dnl The second test excludes FreeBSD msgfmt.
+  AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+    [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+     (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+    :)
+  AC_PATH_PROG([GMSGFMT], [gmsgfmt], [$MSGFMT])
+
+  dnl Test whether it is GNU msgfmt >= 0.15.
+changequote(,)dnl
+  case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+    *) GMSGFMT_015=$GMSGFMT ;;
+  esac
+changequote([,])dnl
+  AC_SUBST([GMSGFMT_015])
+
+  dnl Search for GNU xgettext 0.12 or newer in the PATH.
+  dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+  dnl The second test excludes FreeBSD xgettext.
+  AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+    [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+     (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+    :)
+  dnl Remove leftover from FreeBSD xgettext call.
+  rm -f messages.po
+
+  dnl Test whether it is GNU xgettext >= 0.15.
+changequote(,)dnl
+  case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+    '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+    *) XGETTEXT_015=$XGETTEXT ;;
+  esac
+changequote([,])dnl
+  AC_SUBST([XGETTEXT_015])
+
+  dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+  AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+    [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
+
+  dnl Test whether it is GNU msgmerge >= 0.20.
+  if LC_ALL=C $MSGMERGE --help | grep ' --for-msgfmt ' >/dev/null; then
+    MSGMERGE_FOR_MSGFMT_OPTION='--for-msgfmt'
+  else
+    dnl Test whether it is GNU msgmerge >= 0.12.
+    if LC_ALL=C $MSGMERGE --help | grep ' --no-fuzzy-matching ' >/dev/null; then
+      MSGMERGE_FOR_MSGFMT_OPTION='--no-fuzzy-matching --no-location --quiet'
+    else
+      dnl With these old versions, $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) is
+      dnl slow. But this is not a big problem, as such old gettext versions are
+      dnl hardly in use any more.
+      MSGMERGE_FOR_MSGFMT_OPTION='--no-location --quiet'
+    fi
+  fi
+  AC_SUBST([MSGMERGE_FOR_MSGFMT_OPTION])
+
+  dnl Support for AM_XGETTEXT_OPTION.
+  test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+  AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
+
+  AC_CONFIG_COMMANDS([po-directories], [[
+    for ac_file in $CONFIG_FILES; do
+      # Support "outfile[:infile[:infile...]]"
+      case "$ac_file" in
+        *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+      esac
+      # PO directories have a Makefile.in generated from Makefile.in.in.
+      case "$ac_file" in */Makefile.in)
+        # Adjust a relative srcdir.
+        ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+        ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+        ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+        # In autoconf-2.13 it is called $ac_given_srcdir.
+        # In autoconf-2.50 it is called $srcdir.
+        test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+        case "$ac_given_srcdir" in
+          .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+          /*) top_srcdir="$ac_given_srcdir" ;;
+          *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+        esac
+        # Treat a directory as a PO directory if and only if it has a
+        # POTFILES.in file. This allows packages to have multiple PO
+        # directories under different names or in different locations.
+        if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+          rm -f "$ac_dir/POTFILES"
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+          gt_tab=`printf '\t'`
+          cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ${gt_tab}]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+          POMAKEFILEDEPS="POTFILES.in"
+          # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+          # on $ac_dir but don't depend on user-specified configuration
+          # parameters.
+          if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+            # The LINGUAS file contains the set of available languages.
+            if test -n "$OBSOLETE_ALL_LINGUAS"; then
+              test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+            fi
+            ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+            POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+          else
+            # The set of available languages was given in configure.in.
+            ALL_LINGUAS=$OBSOLETE_ALL_LINGUAS
+          fi
+          # Compute POFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+          # Compute UPDATEPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+          # Compute DUMMYPOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+          # Compute GMOFILES
+          # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+          case "$ac_given_srcdir" in
+            .) srcdirpre= ;;
+            *) srcdirpre='$(srcdir)/' ;;
+          esac
+          POFILES=
+          UPDATEPOFILES=
+          DUMMYPOFILES=
+          GMOFILES=
+          for lang in $ALL_LINGUAS; do
+            POFILES="$POFILES $srcdirpre$lang.po"
+            UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+            DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+            GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+          done
+          # CATALOGS depends on both $ac_dir and the user's LINGUAS
+          # environment variable.
+          INST_LINGUAS=
+          if test -n "$ALL_LINGUAS"; then
+            for presentlang in $ALL_LINGUAS; do
+              useit=no
+              if test "%UNSET%" != "$LINGUAS"; then
+                desiredlanguages="$LINGUAS"
+              else
+                desiredlanguages="$ALL_LINGUAS"
+              fi
+              for desiredlang in $desiredlanguages; do
+                # Use the presentlang catalog if desiredlang is
+                #   a. equal to presentlang, or
+                #   b. a variant of presentlang (because in this case,
+                #      presentlang can be used as a fallback for messages
+                #      which are not translated in the desiredlang catalog).
+                case "$desiredlang" in
+                  "$presentlang"*) useit=yes;;
+                esac
+              done
+              if test $useit = yes; then
+                INST_LINGUAS="$INST_LINGUAS $presentlang"
+              fi
+            done
+          fi
+          CATALOGS=
+          if test -n "$INST_LINGUAS"; then
+            for lang in $INST_LINGUAS; do
+              CATALOGS="$CATALOGS $lang.gmo"
+            done
+          fi
+          test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+          sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+          for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+            if test -f "$f"; then
+              case "$f" in
+                *.orig | *.bak | *~) ;;
+                *) cat "$f" >> "$ac_dir/Makefile" ;;
+              esac
+            fi
+          done
+        fi
+        ;;
+      esac
+    done]],
+   [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+    # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS.
+    OBSOLETE_ALL_LINGUAS="$ALL_LINGUAS"
+    # Capture the value of LINGUAS because we need it to compute CATALOGS.
+    LINGUAS="${LINGUAS-%UNSET%}"
+   ])
+])
+
+dnl Postprocesses a Makefile in a directory containing PO files.
+AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
+[
+  # When this code is run, in config.status, two variables have already been
+  # set:
+  # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
+  # - LINGUAS is the value of the environment variable LINGUAS at configure
+  #   time.
+
+changequote(,)dnl
+  # Adjust a relative srcdir.
+  ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+  ac_dir_suffix=/`echo "$ac_dir"|sed 's%^\./%%'`
+  ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+  # In autoconf-2.13 it is called $ac_given_srcdir.
+  # In autoconf-2.50 it is called $srcdir.
+  test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+  case "$ac_given_srcdir" in
+    .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+    /*) top_srcdir="$ac_given_srcdir" ;;
+    *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
+  esac
+
+  # Find a way to echo strings without interpreting backslash.
+  if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+    gt_echo='echo'
+  else
+    if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+      gt_echo='printf %s\n'
+    else
+      echo_func () {
+        cat <<EOT
+$*
+EOT
+      }
+      gt_echo='echo_func'
+    fi
+  fi
+
+  # A sed script that extracts the value of VARIABLE from a Makefile.
+  tab=`printf '\t'`
+  sed_x_variable='
+# Test if the hold space is empty.
+x
+s/P/P/
+x
+ta
+# Yes it was empty. Look if we have the expected variable definition.
+/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=/{
+  # Seen the first line of the variable definition.
+  s/^['"${tab}"' ]*VARIABLE['"${tab}"' ]*=//
+  ba
+}
+bd
+:a
+# Here we are processing a line from the variable definition.
+# Remove comment, more precisely replace it with a space.
+s/#.*$/ /
+# See if the line ends in a backslash.
+tb
+:b
+s/\\$//
+# Print the line, without the trailing backslash.
+p
+tc
+# There was no trailing backslash. The end of the variable definition is
+# reached. Clear the hold space.
+s/^.*$//
+x
+bd
+:c
+# A trailing backslash means that the variable definition continues in the
+# next line. Put a nonempty string into the hold space to indicate this.
+s/^.*$/P/
+x
+:d
+'
+changequote([,])dnl
+
+  # Set POTFILES to the value of the Makefile variable POTFILES.
+  sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
+  POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
+  # Compute POTFILES_DEPS as
+  #   $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
+  POTFILES_DEPS=
+  for file in $POTFILES; do
+    POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
+  done
+  POMAKEFILEDEPS=""
+
+  if test -n "$OBSOLETE_ALL_LINGUAS"; then
+    test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+  fi
+  if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+    # The LINGUAS file contains the set of available languages.
+    ALL_LINGUAS=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+    POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+  else
+    # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
+    sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
+    ALL_LINGUAS=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
+  fi
+  # Compute POFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+  # Compute UPDATEPOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+  # Compute DUMMYPOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+  # Compute GMOFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+  # Compute PROPERTIESFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(DOMAIN)_$(lang).properties)
+  # Compute CLASSFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(DOMAIN)_$(lang).class)
+  # Compute QMFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
+  # Compute MSGFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
+  # Compute RESOURCESDLLFILES
+  # as      $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
+  case "$ac_given_srcdir" in
+    .) srcdirpre= ;;
+    *) srcdirpre='$(srcdir)/' ;;
+  esac
+  POFILES=
+  UPDATEPOFILES=
+  DUMMYPOFILES=
+  GMOFILES=
+  PROPERTIESFILES=
+  CLASSFILES=
+  QMFILES=
+  MSGFILES=
+  RESOURCESDLLFILES=
+  for lang in $ALL_LINGUAS; do
+    POFILES="$POFILES $srcdirpre$lang.po"
+    UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+    DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+    GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+    PROPERTIESFILES="$PROPERTIESFILES \$(srcdir)/\$(DOMAIN)_$lang.properties"
+    CLASSFILES="$CLASSFILES \$(srcdir)/\$(DOMAIN)_$lang.class"
+    QMFILES="$QMFILES $srcdirpre$lang.qm"
+    frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+    MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
+    frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+    RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
+  done
+  # CATALOGS depends on both $ac_dir and the user's LINGUAS
+  # environment variable.
+  INST_LINGUAS=
+  if test -n "$ALL_LINGUAS"; then
+    for presentlang in $ALL_LINGUAS; do
+      useit=no
+      if test "%UNSET%" != "$LINGUAS"; then
+        desiredlanguages="$LINGUAS"
+      else
+        desiredlanguages="$ALL_LINGUAS"
+      fi
+      for desiredlang in $desiredlanguages; do
+        # Use the presentlang catalog if desiredlang is
+        #   a. equal to presentlang, or
+        #   b. a variant of presentlang (because in this case,
+        #      presentlang can be used as a fallback for messages
+        #      which are not translated in the desiredlang catalog).
+        case "$desiredlang" in
+          "$presentlang"*) useit=yes;;
+        esac
+      done
+      if test $useit = yes; then
+        INST_LINGUAS="$INST_LINGUAS $presentlang"
+      fi
+    done
+  fi
+  CATALOGS=
+  JAVACATALOGS=
+  QTCATALOGS=
+  TCLCATALOGS=
+  CSHARPCATALOGS=
+  if test -n "$INST_LINGUAS"; then
+    for lang in $INST_LINGUAS; do
+      CATALOGS="$CATALOGS $lang.gmo"
+      JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
+      QTCATALOGS="$QTCATALOGS $lang.qm"
+      frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+      TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
+      frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+      CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
+    done
+  fi
+
+  sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
+  tab=`printf '\t'`
+  if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
+    # Add dependencies that cannot be formulated as a simple suffix rule.
+    for lang in $ALL_LINGUAS; do
+      frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+      cat >> "$ac_file.tmp" <<EOF
+$frobbedlang.msg: $lang.po
+${tab}@echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
+${tab}\$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+    done
+  fi
+  if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
+    # Add dependencies that cannot be formulated as a simple suffix rule.
+    for lang in $ALL_LINGUAS; do
+      frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+      cat >> "$ac_file.tmp" <<EOF
+$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
+${tab}@echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
+${tab}\$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+    done
+  fi
+  if test -n "$POMAKEFILEDEPS"; then
+    cat >> "$ac_file.tmp" <<EOF
+Makefile: $POMAKEFILEDEPS
+EOF
+  fi
+  mv "$ac_file.tmp" "$ac_file"
+])
+
+dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
+AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
+[
+  XGETTEXT_EXTRA_OPTIONS=
+])
+
+dnl Registers an option to be passed to xgettext in the po subdirectory.
+AC_DEFUN([AM_XGETTEXT_OPTION],
+[
+  AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
+  XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
+])
diff -Naurp dpkg-1.20.7.1-orig/m4/progtest.m4 dpkg-1.20.7.1/m4/progtest.m4
--- dpkg-1.20.7.1-orig/m4/progtest.m4	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/m4/progtest.m4	2021-06-09 18:22:47.473275398 -0500
@@ -0,0 +1,91 @@
+# progtest.m4 serial 7 (gettext-0.18.2)
+dnl Copyright (C) 1996-2003, 2005, 2008-2019 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl   Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+AC_PREREQ([2.50])
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  # Determine PATH_SEPARATOR by trying to find /bin/sh in a PATH which
+  # contains only /bin. Note that ksh looks also at the FPATH variable,
+  # so we have to set that as well for the test.
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+    && { (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 \
+           || PATH_SEPARATOR=';'
+       }
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  ac_executable_p="test -x"
+else
+  ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL([ac_cv_path_$1],
+[case "[$]$1" in
+  [[\\/]]* | ?:[[\\/]]*)
+    ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+    ;;
+  *)
+    ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in ifelse([$5], , $PATH, [$5]); do
+      IFS="$ac_save_IFS"
+      test -z "$ac_dir" && ac_dir=.
+      for ac_exec_ext in '' $ac_executable_extensions; do
+        if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+          echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
+          if [$3]; then
+            ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
+            break 2
+          fi
+        fi
+      done
+    done
+    IFS="$ac_save_IFS"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+    ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+  AC_MSG_RESULT([$][$1])
+else
+  AC_MSG_RESULT([no])
+fi
+AC_SUBST([$1])dnl
+])
diff -Naurp dpkg-1.20.7.1-orig/Makefile dpkg-1.20.7.1/Makefile
--- dpkg-1.20.7.1-orig/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/Makefile	2021-06-09 18:24:51.821468117 -0500
@@ -0,0 +1,1317 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# Variables to be defined:
+#
+#  TEST_VERBOSE - set to 0 (default) or 1 to control test suite verbosity
+#  TEST_PARALLEL - set to 1 (default) or N to control the parallel jobs
+#  TEST_ENV_VARS - environment variables to be set for the test suite
+#  TEST_COVERAGE - set to the perl module in charge of getting test coverage
+#  test_tmpdir - test suite temporary directory
+#  test_scripts - list of test case scripts
+#  test_programs - list of test case programs
+#  test_data - list of test data files
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(dist_aclocal_DATA) $(dist_doc_DATA) \
+	$(dist_pkgdata_DATA) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = doc/Doxyfile
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(docdir)" \
+	"$(DESTDIR)$(pkgdatadir)"
+DATA = $(dist_aclocal_DATA) $(dist_doc_DATA) $(dist_pkgdata_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir distdir-am dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = lib dpkg-deb dpkg-split src utils dselect scripts \
+	t-func po man
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+	$(top_srcdir)/build-aux/ar-lib $(top_srcdir)/build-aux/compile \
+	$(top_srcdir)/build-aux/config.guess \
+	$(top_srcdir)/build-aux/config.rpath \
+	$(top_srcdir)/build-aux/config.sub \
+	$(top_srcdir)/build-aux/install-sh \
+	$(top_srcdir)/build-aux/ltmain.sh \
+	$(top_srcdir)/build-aux/missing $(top_srcdir)/check.am \
+	$(top_srcdir)/cpan.am $(top_srcdir)/doc/Doxyfile.in ABOUT-NLS \
+	AUTHORS COPYING NEWS README THANKS TODO build-aux/ar-lib \
+	build-aux/compile build-aux/config.guess \
+	build-aux/config.rpath build-aux/config.sub \
+	build-aux/install-sh build-aux/ltmain.sh build-aux/missing
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+GZIP_ENV = --best
+DIST_ARCHIVES = $(distdir).tar.xz
+DIST_TARGETS = dist-xz
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = 
+top_builddir = .
+top_srcdir = .
+#MAYBE_DSELECT = dselect
+SUBDIRS = \
+	lib \
+	dpkg-deb \
+	dpkg-split \
+	src \
+	utils \
+	$(MAYBE_DSELECT) \
+	scripts \
+	t-func \
+	po \
+	man
+
+ACLOCAL_AMFLAGS = -I m4
+aclocaldir = $(datadir)/aclocal
+dist_aclocal_DATA = \
+	m4/dpkg-arch.m4 \
+	m4/dpkg-build.m4 \
+	m4/dpkg-compiler.m4 \
+	m4/dpkg-coverage.m4 \
+	m4/dpkg-funcs.m4 \
+	m4/dpkg-libs.m4 \
+	m4/dpkg-linker.m4 \
+	m4/dpkg-progs.m4 \
+	m4/dpkg-types.m4 \
+	m4/dpkg-unicode.m4 \
+	$(nil)
+
+dist_pkgdata_DATA = \
+	data/pie-compile.specs \
+	data/pie-link.specs \
+	data/no-pie-compile.specs \
+	data/no-pie-link.specs \
+	data/cputable \
+	data/ostable \
+	data/abitable \
+	data/tupletable \
+	$(nil)
+
+dist_doc_DATA = \
+	doc/README.api \
+	doc/README.feature-removal-schedule \
+	doc/frontend.txt \
+	doc/protected-field.txt \
+	doc/rootless-builds.txt \
+	doc/triggers.txt \
+	$(nil)
+
+EXTRA_DIST = \
+	.gitlab-ci.yml \
+	.mailmap \
+	ChangeLog.old \
+	README.l10n \
+	autogen \
+	gen-changelog \
+	get-version \
+	run-script \
+	doc/coding-style.txt \
+	doc/lcov-inject.pl \
+	debian/README.bug-usertags \
+	debian/bug-script \
+	debian/changelog \
+	debian/control \
+	debian/copyright \
+	debian/dpkg-dev.docs \
+	debian/dpkg-dev.install \
+	debian/dpkg-dev.manpages \
+	debian/dpkg.alternatives.logrotate \
+	debian/dpkg.cfg \
+	debian/dpkg.cron.daily \
+	debian/dpkg.docs \
+	debian/dpkg.install \
+	debian/dpkg.manpages \
+	debian/dpkg.postrm \
+	debian/dpkg.logrotate \
+	debian/dpkg.lintian-overrides \
+	debian/dpkg.lintian-profile \
+	debian/dselect.cfg \
+	debian/dselect.docs \
+	debian/dselect.install \
+	debian/dselect.manpages \
+	debian/dselect.postrm \
+	debian/libdpkg-dev.install \
+	debian/libdpkg-perl.install \
+	debian/source/format \
+	debian/rules \
+	debian/shlibs.default \
+	debian/shlibs.override \
+	debian/tests/control \
+	debian/tests/test-func \
+	debian/tests/test-func-root \
+	debian/tests/test-not-root \
+	debian/tests/test-root \
+	po/its/polkit.its \
+	po/its/polkit.loc \
+	tests \
+	$(test_scripts) \
+	$(test_data) \
+	$(nil)
+
+#LCOV_OPTS = -q --rc geninfo_checksum=1 --rc lcov_branch_coverage=1
+#LCOV_CAPTURE_OPTS = $(LCOV_OPTS) --no-recursion \
+#	-d $(top_builddir)/lib/dpkg \
+#	-d $(top_builddir)/src \
+#	-d $(top_builddir)/utils
+
+#LCOV_INJECT = $(PERL) -i $(top_srcdir)/doc/lcov-inject.pl
+test_scripts = \
+	t/po.t \
+	t/pod.t \
+	t/pod-spell.t \
+	t/pod-coverage.t \
+	t/synopsis.t \
+	t/minimum-version.t \
+	t/module-version.t \
+	t/syntax.t \
+	t/strict.t \
+	t/critic.t \
+	t/codespell.t \
+	t/shellcheck.t \
+	t/cppcheck.t \
+	$(nil)
+
+test_data = \
+	t/critic/perlcriticrc \
+	t/codespell/stopwords \
+	t/cppcheck/cppcheck.supp \
+	$(nil)
+
+
+# We need to use absolute paths here due to strict.t invoking a sub-perl,
+# while changing dir to source dir on out-of-tree builds.
+TEST_ENV_VARS = \
+	DPKG_DATADIR=$(abs_top_srcdir)/data \
+	$(nil)
+
+TEST_RUNNER = '\
+	my $$harness = TAP::Harness->new({ \
+	    exec => sub { my (undef, $$test) = @_; \
+	        return [ $$test ] if $$test !~ "\.t\$$" and -x $$test; \
+	        return }, \
+	    lib => [ "$(top_srcdir)/scripts", "$(top_srcdir)/dselect/methods"  ], \
+	    color => 1, \
+	    verbosity => $(TEST_VERBOSE), \
+	    jobs => $(TEST_PARALLEL), \
+	    failures => 1, \
+	}); \
+	my $$aggregate = $$harness->runtests(@ARGV); \
+	die "FAIL: test suite has errors\n" if $$aggregate->has_errors;'
+
+CPAN_DIST_NAME = $(PACKAGE_CPAN_NAME)
+CPAN_DIST_VERSION = $(PACKAGE_VERSION)
+#CPAN_DIST_SUFFIX = -TRIAL
+CPAN_DIST = $(CPAN_DIST_NAME)-$(CPAN_DIST_VERSION)$(CPAN_DIST_SUFFIX)
+CPAN_DIST_ARCHIVE = $(CPAN_DIST).tar.gz
+
+# Ignore the CPAN archive for distcleancheck.
+distcleancheck_listfiles = \
+	find -type f \( -name $(CPAN_DIST_ARCHIVE) -o -print \)
+
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/check.am $(top_srcdir)/cpan.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
+	esac;
+$(top_srcdir)/check.am $(top_srcdir)/cpan.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+doc/Doxyfile: $(top_builddir)/config.status $(top_srcdir)/doc/Doxyfile.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-dist_aclocalDATA: $(dist_aclocal_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(dist_aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(aclocaldir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(aclocaldir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(aclocaldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(aclocaldir)" || exit $$?; \
+	done
+
+uninstall-dist_aclocalDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(aclocaldir)'; $(am__uninstall_files_from_dir)
+install-dist_docDATA: $(dist_doc_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
+	done
+
+uninstall-dist_docDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
+install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
+	done
+
+uninstall-dist_pkgdataDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
+
+dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__post_remove_distdir)
+
+dist-shar: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__post_remove_distdir)
+
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-recursive
+all-am: Makefile $(DATA) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgdatadir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-dist_aclocalDATA install-dist_docDATA \
+	install-dist_pkgdataDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-dist_aclocalDATA uninstall-dist_docDATA \
+	uninstall-dist_pkgdataDATA
+
+.MAKE: $(am__recursive_targets) all check-am install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am check-local clean clean-cscope \
+	clean-generic clean-libtool clean-local cscope cscopelist-am \
+	ctags ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \
+	dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
+	distclean distclean-generic distclean-hdr distclean-libtool \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dist_aclocalDATA \
+	install-dist_docDATA install-dist_pkgdataDATA install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags tags-am uninstall uninstall-am \
+	uninstall-dist_aclocalDATA uninstall-dist_docDATA \
+	uninstall-dist_pkgdataDATA
+
+.PRECIOUS: Makefile
+
+
+.PHONY: doc
+
+doc: doc/Doxyfile
+	$(DOXYGEN) doc/Doxyfile
+
+doc-clean:
+	rm -rf doc/html/
+
+# Code coverage support
+
+.PHONY: coverage coverage-clean
+
+#coverage: all
+#	: # Remove coverage data from any previous run
+#	rm -f *.lcov
+#	find -name '*.gcda' -o -name '*.gcov' | xargs rm -f
+
+#	: # Initialize data
+#	$(LCOV) $(LCOV_CAPTURE_OPTS) -c -o dpkg_base.lcov -i
+#	: # Run test cases
+#	$(MAKE) -C lib/dpkg check
+#	$(MAKE) -C src check
+#	$(MAKE) -C utils check
+#	: # Merge test coverage data
+#	$(LCOV) $(LCOV_CAPTURE_OPTS) -c -o dpkg_test.lcov
+#	$(LCOV) $(LCOV_OPTS) -a dpkg_base.lcov -a dpkg_test.lcov \
+#	  -o dpkg_merge.lcov
+#	$(LCOV) $(LCOV_OPTS) -r dpkg_merge.lcov '/usr/include/*' -o dpkg.lcov
+#	: # Generate reports
+#	$(LCOV) $(LCOV_OPTS) -l dpkg.lcov
+#	$(LCOV_GENHTML) $(LCOV_OPTS) \
+#	  --legend --title "dpkg $(VERSION) C code coverage" \
+#	  -o doc/coverage dpkg.lcov
+
+#	$(MAKE) -C scripts $@
+
+#	: # XXX: Inject perl coverage into lcov index files. This is a fragile
+#	: # hack which might break depending on the html output generated.
+#	$(LCOV_INJECT) doc/coverage/index-sort-b.html
+#	$(LCOV_INJECT) doc/coverage/index-sort-f.html
+#	$(LCOV_INJECT) doc/coverage/index-sort-l.html
+#	$(LCOV_INJECT) doc/coverage/index.html
+
+#coverage-clean:
+#	rm -rf doc/coverage/
+#	find -name '*.gcno' -o -name '*.gcda' -o \
+#	     -name '*.gcov' -o -name '*.lcov' | xargs rm -f
+#	$(MAKE) -C scripts $@
+coverage:
+	@echo "Need to reconfigure with --enable-coverage"
+
+coverage-clean:
+
+TEST_VERBOSE ?= 0
+TEST_PARALLEL ?= 1
+
+check-clean:
+	[ -z "$(test_tmpdir)" ] || rm -fr $(test_tmpdir)
+
+check-local: $(test_data) $(test_programs) $(test_scripts)
+	[ -z "$(test_tmpdir)" ] || $(MKDIR_P) $(test_tmpdir)
+	PATH="$(abs_top_builddir)/src:$(abs_top_builddir)/scripts:$(abs_top_builddir)/utils:$(PATH)" \
+	  LC_ALL=C \
+	  DPKG_COLORS=never \
+	  $(TEST_ENV_VARS) \
+	  srcdir=$(srcdir) builddir=$(builddir) \
+	  CC=$(CC) \
+	  PERL=$(PERL) \
+	  SHELL=$(SHELL) \
+	  PERL_DL_NONLAZY=1 \
+	  PERL5LIB=$(abs_top_srcdir)/scripts:$(abs_top_srcdir)/dselect/methods \
+	  PERL5OPT=$(TEST_COVERAGE) \
+	  $(PERL) -MTAP::Harness -e $(TEST_RUNNER) \
+	    $(addprefix $(builddir)/,$(test_programs)) \
+	    $(addprefix $(srcdir)/,$(test_scripts))
+
+.PHONY: update-po
+
+update-po:
+	$(MAKE) -C po update-po
+	$(MAKE) -C scripts/po update-po
+	$(MAKE) -C dselect/po update-po
+	$(MAKE) -C man update-po
+
+dist-cpan:
+	: # Create the CPAN source tree.
+	mkdir -p $(CPAN_DIST)
+	mkdir -p $(CPAN_DIST)/lib
+	mkdir -p $(CPAN_DIST)/t
+	cp -fpR $(top_srcdir)/COPYING $(CPAN_DIST)/LICENSE
+	cp -fpR $(top_srcdir)/debian/changelog $(CPAN_DIST)/Changes
+	cp -fpR $(top_srcdir)/data $(CPAN_DIST)
+	cp -fpR $(top_srcdir)/t/* \
+	         $(top_srcdir)/scripts/t/Dpkg* \
+	         $(top_srcdir)/scripts/t/origins \
+	         $(CPAN_DIST)/t
+	cp -fpR $(top_srcdir)/scripts/Dpkg.pm $(CPAN_DIST)/lib/
+	cp -fpR $(top_srcdir)/scripts/Dpkg $(CPAN_DIST)/lib/
+	cp -fpR $(top_srcdir)/scripts/Test $(CPAN_DIST)/lib/
+	cp -fpR $(top_builddir)/scripts/README.cpan $(CPAN_DIST)/README
+	cp -fpR $(top_builddir)/scripts/Build.PL $(CPAN_DIST)
+
+	: # Fix permissions of the distributed files.
+	find $(CPAN_DIST) \
+	       -type d ! -perm 755 -exec chmod u+rwx,go+rx {} ';' -o \
+	     ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	     ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	     ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; || \
+	  chmod -R a+r $(CPAN_DIST)
+
+	: # Prepare the CPAN distribution.
+	cd $(CPAN_DIST) && $(PERL) Build.PL
+	cd $(CPAN_DIST) && ./Build manifest
+	cd $(CPAN_DIST) && ./Build distdir
+
+	: # Pack the CPAN distribution.
+	$(TAR) -caf $(CPAN_DIST_ARCHIVE) -C $(CPAN_DIST) -Hustar \
+	  --sort=name --owner=root:0 --group=root:0 $(CPAN_DIST)
+
+	: # Cleanup the CPAN source tree.
+	find $(CPAN_DIST) -type d ! -perm -200 -exec chmod u+w {} ';'
+	rm -rf $(CPAN_DIST)
+
+# If we create the dist tarball from the git repository, make sure
+# that we're not forgetting some files...
+dist-hook: dist-cpan
+	echo $(VERSION) >$(distdir)/.dist-version
+	if [ -e .git ]; then \
+	  for file in `git ls-files | grep -v .gitignore`; do \
+	    if [ ! -e "$(distdir)/$$file" ]; then \
+	      echo "$$file is missing in $(distdir)" >&2 ; \
+	      exit 1 ; \
+	    fi ; \
+	  done ; \
+	  XDG_CONFIG_HOME= HOME= \
+	  git log -C --stat 1.15.0.. >$(distdir)/ChangeLog; \
+	fi
+
+clean-local: doc-clean coverage-clean check-clean
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/Makefile.in dpkg-1.20.7.1/Makefile.in
--- dpkg-1.20.7.1-orig/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/Makefile.in	2021-06-09 18:23:00.594295929 -0500
@@ -0,0 +1,1317 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Variables to be defined:
+#
+#  TEST_VERBOSE - set to 0 (default) or 1 to control test suite verbosity
+#  TEST_PARALLEL - set to 1 (default) or N to control the parallel jobs
+#  TEST_ENV_VARS - environment variables to be set for the test suite
+#  TEST_COVERAGE - set to the perl module in charge of getting test coverage
+#  test_tmpdir - test suite temporary directory
+#  test_scripts - list of test case scripts
+#  test_programs - list of test case programs
+#  test_data - list of test data files
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(dist_aclocal_DATA) $(dist_doc_DATA) \
+	$(dist_pkgdata_DATA) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = doc/Doxyfile
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(docdir)" \
+	"$(DESTDIR)$(pkgdatadir)"
+DATA = $(dist_aclocal_DATA) $(dist_doc_DATA) $(dist_pkgdata_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	cscope distdir distdir-am dist dist-all distcheck
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+	$(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+DIST_SUBDIRS = lib dpkg-deb dpkg-split src utils dselect scripts \
+	t-func po man
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+	$(top_srcdir)/build-aux/ar-lib $(top_srcdir)/build-aux/compile \
+	$(top_srcdir)/build-aux/config.guess \
+	$(top_srcdir)/build-aux/config.rpath \
+	$(top_srcdir)/build-aux/config.sub \
+	$(top_srcdir)/build-aux/install-sh \
+	$(top_srcdir)/build-aux/ltmain.sh \
+	$(top_srcdir)/build-aux/missing $(top_srcdir)/check.am \
+	$(top_srcdir)/cpan.am $(top_srcdir)/doc/Doxyfile.in ABOUT-NLS \
+	AUTHORS COPYING NEWS README THANKS TODO build-aux/ar-lib \
+	build-aux/compile build-aux/config.guess \
+	build-aux/config.rpath build-aux/config.sub \
+	build-aux/install-sh build-aux/ltmain.sh build-aux/missing
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  if test -d "$(distdir)"; then \
+    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+      && rm -rf "$(distdir)" \
+      || { sleep 5 && rm -rf "$(distdir)"; }; \
+  else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+GZIP_ENV = --best
+DIST_ARCHIVES = $(distdir).tar.xz
+DIST_TARGETS = dist-xz
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+@BUILD_DSELECT_TRUE@MAYBE_DSELECT = dselect
+SUBDIRS = \
+	lib \
+	dpkg-deb \
+	dpkg-split \
+	src \
+	utils \
+	$(MAYBE_DSELECT) \
+	scripts \
+	t-func \
+	po \
+	man
+
+ACLOCAL_AMFLAGS = -I m4
+aclocaldir = $(datadir)/aclocal
+dist_aclocal_DATA = \
+	m4/dpkg-arch.m4 \
+	m4/dpkg-build.m4 \
+	m4/dpkg-compiler.m4 \
+	m4/dpkg-coverage.m4 \
+	m4/dpkg-funcs.m4 \
+	m4/dpkg-libs.m4 \
+	m4/dpkg-linker.m4 \
+	m4/dpkg-progs.m4 \
+	m4/dpkg-types.m4 \
+	m4/dpkg-unicode.m4 \
+	$(nil)
+
+dist_pkgdata_DATA = \
+	data/pie-compile.specs \
+	data/pie-link.specs \
+	data/no-pie-compile.specs \
+	data/no-pie-link.specs \
+	data/cputable \
+	data/ostable \
+	data/abitable \
+	data/tupletable \
+	$(nil)
+
+dist_doc_DATA = \
+	doc/README.api \
+	doc/README.feature-removal-schedule \
+	doc/frontend.txt \
+	doc/protected-field.txt \
+	doc/rootless-builds.txt \
+	doc/triggers.txt \
+	$(nil)
+
+EXTRA_DIST = \
+	.gitlab-ci.yml \
+	.mailmap \
+	ChangeLog.old \
+	README.l10n \
+	autogen \
+	gen-changelog \
+	get-version \
+	run-script \
+	doc/coding-style.txt \
+	doc/lcov-inject.pl \
+	debian/README.bug-usertags \
+	debian/bug-script \
+	debian/changelog \
+	debian/control \
+	debian/copyright \
+	debian/dpkg-dev.docs \
+	debian/dpkg-dev.install \
+	debian/dpkg-dev.manpages \
+	debian/dpkg.alternatives.logrotate \
+	debian/dpkg.cfg \
+	debian/dpkg.cron.daily \
+	debian/dpkg.docs \
+	debian/dpkg.install \
+	debian/dpkg.manpages \
+	debian/dpkg.postrm \
+	debian/dpkg.logrotate \
+	debian/dpkg.lintian-overrides \
+	debian/dpkg.lintian-profile \
+	debian/dselect.cfg \
+	debian/dselect.docs \
+	debian/dselect.install \
+	debian/dselect.manpages \
+	debian/dselect.postrm \
+	debian/libdpkg-dev.install \
+	debian/libdpkg-perl.install \
+	debian/source/format \
+	debian/rules \
+	debian/shlibs.default \
+	debian/shlibs.override \
+	debian/tests/control \
+	debian/tests/test-func \
+	debian/tests/test-func-root \
+	debian/tests/test-not-root \
+	debian/tests/test-root \
+	po/its/polkit.its \
+	po/its/polkit.loc \
+	tests \
+	$(test_scripts) \
+	$(test_data) \
+	$(nil)
+
+@COVERAGE_ENABLED_TRUE@LCOV_OPTS = -q --rc geninfo_checksum=1 --rc lcov_branch_coverage=1
+@COVERAGE_ENABLED_TRUE@LCOV_CAPTURE_OPTS = $(LCOV_OPTS) --no-recursion \
+@COVERAGE_ENABLED_TRUE@	-d $(top_builddir)/lib/dpkg \
+@COVERAGE_ENABLED_TRUE@	-d $(top_builddir)/src \
+@COVERAGE_ENABLED_TRUE@	-d $(top_builddir)/utils
+
+@COVERAGE_ENABLED_TRUE@LCOV_INJECT = $(PERL) -i $(top_srcdir)/doc/lcov-inject.pl
+test_scripts = \
+	t/po.t \
+	t/pod.t \
+	t/pod-spell.t \
+	t/pod-coverage.t \
+	t/synopsis.t \
+	t/minimum-version.t \
+	t/module-version.t \
+	t/syntax.t \
+	t/strict.t \
+	t/critic.t \
+	t/codespell.t \
+	t/shellcheck.t \
+	t/cppcheck.t \
+	$(nil)
+
+test_data = \
+	t/critic/perlcriticrc \
+	t/codespell/stopwords \
+	t/cppcheck/cppcheck.supp \
+	$(nil)
+
+
+# We need to use absolute paths here due to strict.t invoking a sub-perl,
+# while changing dir to source dir on out-of-tree builds.
+TEST_ENV_VARS = \
+	DPKG_DATADIR=$(abs_top_srcdir)/data \
+	$(nil)
+
+TEST_RUNNER = '\
+	my $$harness = TAP::Harness->new({ \
+	    exec => sub { my (undef, $$test) = @_; \
+	        return [ $$test ] if $$test !~ "\.t\$$" and -x $$test; \
+	        return }, \
+	    lib => [ "$(top_srcdir)/scripts", "$(top_srcdir)/dselect/methods"  ], \
+	    color => 1, \
+	    verbosity => $(TEST_VERBOSE), \
+	    jobs => $(TEST_PARALLEL), \
+	    failures => 1, \
+	}); \
+	my $$aggregate = $$harness->runtests(@ARGV); \
+	die "FAIL: test suite has errors\n" if $$aggregate->has_errors;'
+
+CPAN_DIST_NAME = $(PACKAGE_CPAN_NAME)
+CPAN_DIST_VERSION = $(PACKAGE_VERSION)
+@PACKAGE_DIST_IS_RELEASE_FALSE@CPAN_DIST_SUFFIX = -TRIAL
+CPAN_DIST = $(CPAN_DIST_NAME)-$(CPAN_DIST_VERSION)$(CPAN_DIST_SUFFIX)
+CPAN_DIST_ARCHIVE = $(CPAN_DIST).tar.gz
+
+# Ignore the CPAN archive for distcleancheck.
+distcleancheck_listfiles = \
+	find -type f \( -name $(CPAN_DIST_ARCHIVE) -o -print \)
+
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh: Makefile
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/check.am $(top_srcdir)/cpan.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
+	esac;
+$(top_srcdir)/check.am $(top_srcdir)/cpan.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@test -f $@ || rm -f stamp-h1
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+doc/Doxyfile: $(top_builddir)/config.status $(top_srcdir)/doc/Doxyfile.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-dist_aclocalDATA: $(dist_aclocal_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(dist_aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(aclocaldir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(aclocaldir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(aclocaldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(aclocaldir)" || exit $$?; \
+	done
+
+uninstall-dist_aclocalDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_aclocal_DATA)'; test -n "$(aclocaldir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(aclocaldir)'; $(am__uninstall_files_from_dir)
+install-dist_docDATA: $(dist_doc_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
+	done
+
+uninstall-dist_docDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
+install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
+	done
+
+uninstall-dist_pkgdataDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+	test ! -s cscope.files \
+	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+	-rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
+	$(am__post_remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+	$(am__post_remove_distdir)
+
+dist-lzip: distdir
+	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+	$(am__post_remove_distdir)
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+	$(am__post_remove_distdir)
+
+dist-tarZ: distdir
+	@echo WARNING: "Support for distribution archives compressed with" \
+		       "legacy program 'compress' is deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__post_remove_distdir)
+
+dist-shar: distdir
+	@echo WARNING: "Support for shar distribution archives is" \
+	               "deprecated." >&2
+	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
+	$(am__post_remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__post_remove_distdir)
+
+dist dist-all:
+	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+	$(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lz*) \
+	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir)
+	chmod u+w $(distdir)
+	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build/sub \
+	  && ../../configure \
+	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	    --srcdir=../.. --prefix="$$dc_install_base" \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__post_remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@test -n '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: trying to run $@ with an empty' \
+	       '$$(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	$(am__cd) '$(distuninstallcheck_dir)' || { \
+	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+	  exit 1; \
+	}; \
+	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-recursive
+all-am: Makefile $(DATA) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgdatadir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-dist_aclocalDATA install-dist_docDATA \
+	install-dist_pkgdataDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-dist_aclocalDATA uninstall-dist_docDATA \
+	uninstall-dist_pkgdataDATA
+
+.MAKE: $(am__recursive_targets) all check-am install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
+	am--refresh check check-am check-local clean clean-cscope \
+	clean-generic clean-libtool clean-local cscope cscopelist-am \
+	ctags ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \
+	dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
+	distclean distclean-generic distclean-hdr distclean-libtool \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dist_aclocalDATA \
+	install-dist_docDATA install-dist_pkgdataDATA install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags tags-am uninstall uninstall-am \
+	uninstall-dist_aclocalDATA uninstall-dist_docDATA \
+	uninstall-dist_pkgdataDATA
+
+.PRECIOUS: Makefile
+
+
+.PHONY: doc
+
+doc: doc/Doxyfile
+	$(DOXYGEN) doc/Doxyfile
+
+doc-clean:
+	rm -rf doc/html/
+
+# Code coverage support
+
+.PHONY: coverage coverage-clean
+
+@COVERAGE_ENABLED_TRUE@coverage: all
+@COVERAGE_ENABLED_TRUE@	: # Remove coverage data from any previous run
+@COVERAGE_ENABLED_TRUE@	rm -f *.lcov
+@COVERAGE_ENABLED_TRUE@	find -name '*.gcda' -o -name '*.gcov' | xargs rm -f
+
+@COVERAGE_ENABLED_TRUE@	: # Initialize data
+@COVERAGE_ENABLED_TRUE@	$(LCOV) $(LCOV_CAPTURE_OPTS) -c -o dpkg_base.lcov -i
+@COVERAGE_ENABLED_TRUE@	: # Run test cases
+@COVERAGE_ENABLED_TRUE@	$(MAKE) -C lib/dpkg check
+@COVERAGE_ENABLED_TRUE@	$(MAKE) -C src check
+@COVERAGE_ENABLED_TRUE@	$(MAKE) -C utils check
+@COVERAGE_ENABLED_TRUE@	: # Merge test coverage data
+@COVERAGE_ENABLED_TRUE@	$(LCOV) $(LCOV_CAPTURE_OPTS) -c -o dpkg_test.lcov
+@COVERAGE_ENABLED_TRUE@	$(LCOV) $(LCOV_OPTS) -a dpkg_base.lcov -a dpkg_test.lcov \
+@COVERAGE_ENABLED_TRUE@	  -o dpkg_merge.lcov
+@COVERAGE_ENABLED_TRUE@	$(LCOV) $(LCOV_OPTS) -r dpkg_merge.lcov '/usr/include/*' -o dpkg.lcov
+@COVERAGE_ENABLED_TRUE@	: # Generate reports
+@COVERAGE_ENABLED_TRUE@	$(LCOV) $(LCOV_OPTS) -l dpkg.lcov
+@COVERAGE_ENABLED_TRUE@	$(LCOV_GENHTML) $(LCOV_OPTS) \
+@COVERAGE_ENABLED_TRUE@	  --legend --title "dpkg $(VERSION) C code coverage" \
+@COVERAGE_ENABLED_TRUE@	  -o doc/coverage dpkg.lcov
+
+@COVERAGE_ENABLED_TRUE@	$(MAKE) -C scripts $@
+
+@COVERAGE_ENABLED_TRUE@	: # XXX: Inject perl coverage into lcov index files. This is a fragile
+@COVERAGE_ENABLED_TRUE@	: # hack which might break depending on the html output generated.
+@COVERAGE_ENABLED_TRUE@	$(LCOV_INJECT) doc/coverage/index-sort-b.html
+@COVERAGE_ENABLED_TRUE@	$(LCOV_INJECT) doc/coverage/index-sort-f.html
+@COVERAGE_ENABLED_TRUE@	$(LCOV_INJECT) doc/coverage/index-sort-l.html
+@COVERAGE_ENABLED_TRUE@	$(LCOV_INJECT) doc/coverage/index.html
+
+@COVERAGE_ENABLED_TRUE@coverage-clean:
+@COVERAGE_ENABLED_TRUE@	rm -rf doc/coverage/
+@COVERAGE_ENABLED_TRUE@	find -name '*.gcno' -o -name '*.gcda' -o \
+@COVERAGE_ENABLED_TRUE@	     -name '*.gcov' -o -name '*.lcov' | xargs rm -f
+@COVERAGE_ENABLED_TRUE@	$(MAKE) -C scripts $@
+@COVERAGE_ENABLED_FALSE@coverage:
+@COVERAGE_ENABLED_FALSE@	@echo "Need to reconfigure with --enable-coverage"
+
+@COVERAGE_ENABLED_FALSE@coverage-clean:
+
+TEST_VERBOSE ?= 0
+TEST_PARALLEL ?= 1
+
+check-clean:
+	[ -z "$(test_tmpdir)" ] || rm -fr $(test_tmpdir)
+
+check-local: $(test_data) $(test_programs) $(test_scripts)
+	[ -z "$(test_tmpdir)" ] || $(MKDIR_P) $(test_tmpdir)
+	PATH="$(abs_top_builddir)/src:$(abs_top_builddir)/scripts:$(abs_top_builddir)/utils:$(PATH)" \
+	  LC_ALL=C \
+	  DPKG_COLORS=never \
+	  $(TEST_ENV_VARS) \
+	  srcdir=$(srcdir) builddir=$(builddir) \
+	  CC=$(CC) \
+	  PERL=$(PERL) \
+	  SHELL=$(SHELL) \
+	  PERL_DL_NONLAZY=1 \
+	  PERL5LIB=$(abs_top_srcdir)/scripts:$(abs_top_srcdir)/dselect/methods \
+	  PERL5OPT=$(TEST_COVERAGE) \
+	  $(PERL) -MTAP::Harness -e $(TEST_RUNNER) \
+	    $(addprefix $(builddir)/,$(test_programs)) \
+	    $(addprefix $(srcdir)/,$(test_scripts))
+
+.PHONY: update-po
+
+update-po:
+	$(MAKE) -C po update-po
+	$(MAKE) -C scripts/po update-po
+	$(MAKE) -C dselect/po update-po
+	$(MAKE) -C man update-po
+
+dist-cpan:
+	: # Create the CPAN source tree.
+	mkdir -p $(CPAN_DIST)
+	mkdir -p $(CPAN_DIST)/lib
+	mkdir -p $(CPAN_DIST)/t
+	cp -fpR $(top_srcdir)/COPYING $(CPAN_DIST)/LICENSE
+	cp -fpR $(top_srcdir)/debian/changelog $(CPAN_DIST)/Changes
+	cp -fpR $(top_srcdir)/data $(CPAN_DIST)
+	cp -fpR $(top_srcdir)/t/* \
+	         $(top_srcdir)/scripts/t/Dpkg* \
+	         $(top_srcdir)/scripts/t/origins \
+	         $(CPAN_DIST)/t
+	cp -fpR $(top_srcdir)/scripts/Dpkg.pm $(CPAN_DIST)/lib/
+	cp -fpR $(top_srcdir)/scripts/Dpkg $(CPAN_DIST)/lib/
+	cp -fpR $(top_srcdir)/scripts/Test $(CPAN_DIST)/lib/
+	cp -fpR $(top_builddir)/scripts/README.cpan $(CPAN_DIST)/README
+	cp -fpR $(top_builddir)/scripts/Build.PL $(CPAN_DIST)
+
+	: # Fix permissions of the distributed files.
+	find $(CPAN_DIST) \
+	       -type d ! -perm 755 -exec chmod u+rwx,go+rx {} ';' -o \
+	     ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	     ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	     ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; || \
+	  chmod -R a+r $(CPAN_DIST)
+
+	: # Prepare the CPAN distribution.
+	cd $(CPAN_DIST) && $(PERL) Build.PL
+	cd $(CPAN_DIST) && ./Build manifest
+	cd $(CPAN_DIST) && ./Build distdir
+
+	: # Pack the CPAN distribution.
+	$(TAR) -caf $(CPAN_DIST_ARCHIVE) -C $(CPAN_DIST) -Hustar \
+	  --sort=name --owner=root:0 --group=root:0 $(CPAN_DIST)
+
+	: # Cleanup the CPAN source tree.
+	find $(CPAN_DIST) -type d ! -perm -200 -exec chmod u+w {} ';'
+	rm -rf $(CPAN_DIST)
+
+# If we create the dist tarball from the git repository, make sure
+# that we're not forgetting some files...
+dist-hook: dist-cpan
+	echo $(VERSION) >$(distdir)/.dist-version
+	if [ -e .git ]; then \
+	  for file in `git ls-files | grep -v .gitignore`; do \
+	    if [ ! -e "$(distdir)/$$file" ]; then \
+	      echo "$$file is missing in $(distdir)" >&2 ; \
+	      exit 1 ; \
+	    fi ; \
+	  done ; \
+	  XDG_CONFIG_HOME= HOME= \
+	  git log -C --stat 1.15.0.. >$(distdir)/ChangeLog; \
+	fi
+
+clean-local: doc-clean coverage-clean check-clean
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/man/Makefile dpkg-1.20.7.1/man/Makefile
--- dpkg-1.20.7.1-orig/man/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/man/Makefile	2021-06-09 18:24:51.947468309 -0500
@@ -0,0 +1,969 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# man/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+#am__append_1 = \
+#	dselect.1 \
+#	dselect.cfg.5
+
+#am__append_2 = \
+#	start-stop-daemon.8
+
+#am__append_3 = \
+#	update-alternatives.1
+
+subdir = man
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+man1dir = $(mandir)/man1
+am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" \
+	"$(DESTDIR)$(man7dir)" "$(DESTDIR)$(man8dir)"
+man5dir = $(mandir)/man5
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(man_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/man
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/man
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+man_MANS = deb-buildinfo.5 deb-changelog.5 deb-changes.5 \
+	deb-conffiles.5 deb-control.5 deb-src-control.5 \
+	deb-src-files.5 deb-src-rules.5 deb-src-symbols.5 \
+	deb-version.7 deb-shlibs.5 deb-split.5 deb-substvars.5 \
+	deb-symbols.5 deb-postinst.5 deb-postrm.5 deb-preinst.5 \
+	deb-prerm.5 deb-triggers.5 deb-old.5 deb-origin.5 \
+	deb-override.5 deb-extra-override.5 deb.5 deb822.5 \
+	dpkg-architecture.1 dpkg-buildflags.1 dpkg-buildpackage.1 \
+	dpkg-checkbuilddeps.1 dpkg-deb.1 dpkg-distaddfile.1 \
+	dpkg-divert.1 dpkg-fsys-usrunmess.8 dpkg-genbuildinfo.1 \
+	dpkg-genchanges.1 dpkg-gencontrol.1 dpkg-gensymbols.1 \
+	dpkg-maintscript-helper.1 dpkg-mergechangelogs.1 dpkg-name.1 \
+	dpkg-parsechangelog.1 dpkg-query.1 dpkg-realpath.1 \
+	dpkg-scanpackages.1 dpkg-scansources.1 dpkg-shlibdeps.1 \
+	dpkg-source.1 dpkg-split.1 dpkg-statoverride.1 dpkg-trigger.1 \
+	dpkg-vendor.1 dpkg.1 dpkg.cfg.5 dsc.5 $(nil) $(am__append_1) \
+	$(am__append_2) $(am__append_3)
+CLEANFILES = $(man_MANS)
+EXTRA_DIST = \
+	deb-buildinfo.pod \
+	deb-changelog.pod \
+	deb-changes.pod \
+	deb-conffiles.pod \
+	deb-control.pod \
+	deb-extra-override.pod \
+	deb-old.pod \
+	deb-origin.pod \
+	deb-override.pod \
+	deb-postinst.pod \
+	deb-postrm.pod \
+	deb-preinst.pod \
+	deb-prerm.pod \
+	deb-shlibs.pod \
+	deb-split.pod \
+	deb-src-control.pod \
+	deb-src-files.pod \
+	deb-src-rules.pod \
+	deb-src-symbols.pod \
+	deb-substvars.pod \
+	deb-symbols.pod \
+	deb-triggers.pod \
+	deb-version.pod \
+	deb.pod \
+	deb822.pod \
+	dpkg-architecture.pod \
+	dpkg-buildflags.pod \
+	dpkg-buildpackage.pod \
+	dpkg-checkbuilddeps.pod \
+	dpkg-deb.pod \
+	dpkg-distaddfile.pod \
+	dpkg-divert.pod \
+	dpkg-fsys-usrunmess.pod \
+	dpkg-genbuildinfo.pod \
+	dpkg-genchanges.pod \
+	dpkg-gencontrol.pod \
+	dpkg-gensymbols.pod \
+	dpkg-maintscript-helper.pod \
+	dpkg-mergechangelogs.pod \
+	dpkg-name.pod \
+	dpkg-parsechangelog.pod \
+	dpkg-query.pod \
+	dpkg-realpath.pod \
+	dpkg-scanpackages.pod \
+	dpkg-scansources.pod \
+	dpkg-shlibdeps.pod \
+	dpkg-source.pod \
+	dpkg-split.pod \
+	dpkg-statoverride.pod \
+	dpkg-trigger.pod \
+	dpkg-vendor.pod \
+	dpkg.pod \
+	dpkg.cfg.pod \
+	dsc.pod \
+	dselect.pod \
+	dselect.cfg.pod \
+	start-stop-daemon.pod \
+	update-alternatives.pod \
+	utf8toman.sed \
+	po/ChangeLog.old \
+	po/po4a.cfg \
+	po/dpkg-man.pot
+
+
+# Extract the list of languages from the po4a config file.
+LINGUAS_DIST = `sed -ne 's/^.*\[po4a_langs\] \(.*\)$$/\1/p' $(srcdir)/po/po4a.cfg`
+PO4A_V = $(PO4A_V_$(V))
+PO4A_V_ = $(PO4A_V_$(AM_DEFAULT_VERBOSITY))
+PO4A_V_0 = @echo "  PO4A   $@";
+PO4A_OPTS = --previous --srcdir $(srcdir) --destdir $(builddir) --no-backups \
+            --porefs file --msgmerge-opt=--add-location=file \
+            --package-name dpkg-man --package-version $(PACKAGE_VERSION) \
+            --copyright-holder "$(PACKAGE_COPYRIGHT_HOLDER)" \
+            --msgid-bugs-address $(PACKAGE_BUGREPORT)
+
+SUFFIXES = .pod .1 .5 .7 .8
+POD2MAN_V = $(POD2MAN_V_$(V))
+POD2MAN_V_ = $(POD2MAN_V_$(AM_DEFAULT_VERBOSITY))
+POD2MAN_V_0 = @echo "  POD2MAN $@";
+POD2MAN_OPTS = --utf8 --center='dpkg suite' --release=$(PACKAGE_VERSION) \
+               --date='$(PACKAGE_RELEASE_DATE)'
+
+PODSUBST = sed \
+	-e 's/%PACKAGE%/$(PACKAGE)/g' \
+	-e 's/%VERSION%/$(PACKAGE_VERSION)/g' \
+	-e 's/%RELEASE_DATE%/$(PACKAGE_RELEASE_DATE)/g' \
+	-e 's:%CONFDIR%:$(sysconfdir):g' \
+	-e 's:%LOGDIR%:$(logdir):g' \
+	-e 's:%ADMINDIR%:$(admindir):g' \
+	-e 's:%PKGDOCDIR%:$(docdir):g' \
+	-e 's:%PKGCONFDIR%:$(pkgconfdir):g' \
+	-e 's:%PKGLIBDIR%:$(pkglibexecdir):g' \
+	-e 's:%PKGDATADIR%:$(pkgdatadir):g' \
+	$(nil)
+
+MANFIXUP = sed \
+	-f $(srcdir)/utf8toman.sed \
+	$(nil)
+
+MANGEN = $(POD2MAN_V) filename='$@'; \
+	  $(PODSUBST) $< | \
+	  $(POD2MAN) $(POD2MAN_OPTS) \
+	  --name="$$(basename $${filename%.*})" \
+	  --section="$${filename\#\#*.}" | \
+	  $(MANFIXUP) >$@
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .pod .1 .5 .7 .8
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign man/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-man1: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man1dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.1[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+install-man5: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man5dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.5[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man5:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man5dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.5[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
+install-man7: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man7dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man7dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man7dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.7[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man7dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man7dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man7dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man7dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man7:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man7dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.7[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man7dir)'; $(am__uninstall_files_from_dir)
+install-man8: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man8dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.8[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man8:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man8dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.8[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man7dir)" "$(DESTDIR)$(man8dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1 install-man5 install-man7 install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-local uninstall-man
+
+uninstall-man: uninstall-man1 uninstall-man5 uninstall-man7 \
+	uninstall-man8
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am all-local check check-am clean clean-generic \
+	clean-libtool clean-local cscopelist-am ctags-am dist-hook \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man1 install-man5 install-man7 install-man8 \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am uninstall-local uninstall-man \
+	uninstall-man1 uninstall-man5 uninstall-man7 uninstall-man8
+
+.PRECIOUS: Makefile
+
+
+# If the user has not defined it let's use the default.
+LINGUAS ?= $(LINGUAS_DIST)
+
+all-local: all-local-no
+
+all-local-no:
+all-local-yes: gen-man
+
+.PHONY: gen-man
+
+gen-man: man.stamp
+	for lang in $(LINGUAS); do \
+	  files=""; \
+	  for man in $(man_MANS); do \
+	    tmpl="$${man%%.[0-9]}.pod"; \
+	    if [ -f "$(builddir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    elif [ -f "$(srcdir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    fi; \
+	  done; \
+	  if [ -n "$$files" ]; then \
+	    $(MKDIR_P) $$lang; \
+	    $(MAKE) mandir="$(mandir)/$$lang" man_MANS="" $$files; \
+	  fi; \
+	done
+
+# FIXME: Use a stamp file until po4a supports them internally.
+man.stamp:
+	$(PO4A_V) $(PO4A) $(PO4A_OPTS) $(srcdir)/po/po4a.cfg
+	$(AM_V_at) touch $@
+
+clean-local: clean-local-no
+
+clean-local-no:
+clean-local-yes:
+	rm -rf $(LINGUAS_DIST)
+	$(AM_V_at) rm -f man.stamp
+
+.PHONY: update-po
+
+update-po:
+	$(PO4A_V) $(PO4A) $(PO4A_OPTS) --force $(srcdir)/po/po4a.cfg
+
+.pod.1:
+	$(MANGEN)
+.pod.5:
+	$(MANGEN)
+.pod.7:
+	$(MANGEN)
+.pod.8:
+	$(MANGEN)
+
+install-data-local: install-data-local-no
+
+install-data-local-no:
+install-data-local-yes:
+	for lang in $(LINGUAS); do \
+	  files=""; \
+	  for man in $(man_MANS); do \
+	    tmpl="$${man%%.[0-9]}.pod"; \
+	    if [ -f "$(builddir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    elif [ -f "$(srcdir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    fi; \
+	  done; \
+	  $(MAKE) install-man mandir="$(mandir)/$$lang" man_MANS="$$files"; \
+	done
+
+uninstall-local: uninstall-local-no
+
+uninstall-local-no:
+uninstall-local-yes:
+	for lang in $(LINGUAS); do \
+	  files=""; \
+	  for man in $(man_MANS); do \
+	    tmpl="$${man%%.[0-9]}.pod"; \
+	    if [ -f "$(builddir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    elif [ -f "$(srcdir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    fi; \
+	  done; \
+	  $(MAKE) uninstall-man mandir="$(mandir)/$$lang" man_MANS="$$files"; \
+	done
+
+dist-hook: man.stamp
+	cp -p $< $(distdir)/
+	for lang in $(LINGUAS_DIST); do \
+	  cp -p $(srcdir)/po/$$lang.po $(distdir)/po; \
+	  if [ -e "$(srcdir)/po/$$lang.add" ]; then \
+	    cp -p $(srcdir)/po/$$lang.add $(distdir)/po; \
+	  fi; \
+	  if [ -n "`ls $(builddir)/$$lang/*.pod 2>/dev/null`" ]; then \
+	    $(MKDIR_P) $(distdir)/$$lang; \
+	    cp -p $(builddir)/$$lang/*.pod $(distdir)/$$lang/; \
+	  fi; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/man/Makefile.in dpkg-1.20.7.1/man/Makefile.in
--- dpkg-1.20.7.1-orig/man/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/man/Makefile.in	2021-06-09 18:23:00.901296409 -0500
@@ -0,0 +1,969 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@BUILD_DSELECT_TRUE@am__append_1 = \
+@BUILD_DSELECT_TRUE@	dselect.1 \
+@BUILD_DSELECT_TRUE@	dselect.cfg.5
+
+@BUILD_START_STOP_DAEMON_TRUE@am__append_2 = \
+@BUILD_START_STOP_DAEMON_TRUE@	start-stop-daemon.8
+
+@BUILD_UPDATE_ALTERNATIVES_TRUE@am__append_3 = \
+@BUILD_UPDATE_ALTERNATIVES_TRUE@	update-alternatives.1
+
+subdir = man
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+man1dir = $(mandir)/man1
+am__installdirs = "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" \
+	"$(DESTDIR)$(man7dir)" "$(DESTDIR)$(man8dir)"
+man5dir = $(mandir)/man5
+man7dir = $(mandir)/man7
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(man_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+man_MANS = deb-buildinfo.5 deb-changelog.5 deb-changes.5 \
+	deb-conffiles.5 deb-control.5 deb-src-control.5 \
+	deb-src-files.5 deb-src-rules.5 deb-src-symbols.5 \
+	deb-version.7 deb-shlibs.5 deb-split.5 deb-substvars.5 \
+	deb-symbols.5 deb-postinst.5 deb-postrm.5 deb-preinst.5 \
+	deb-prerm.5 deb-triggers.5 deb-old.5 deb-origin.5 \
+	deb-override.5 deb-extra-override.5 deb.5 deb822.5 \
+	dpkg-architecture.1 dpkg-buildflags.1 dpkg-buildpackage.1 \
+	dpkg-checkbuilddeps.1 dpkg-deb.1 dpkg-distaddfile.1 \
+	dpkg-divert.1 dpkg-fsys-usrunmess.8 dpkg-genbuildinfo.1 \
+	dpkg-genchanges.1 dpkg-gencontrol.1 dpkg-gensymbols.1 \
+	dpkg-maintscript-helper.1 dpkg-mergechangelogs.1 dpkg-name.1 \
+	dpkg-parsechangelog.1 dpkg-query.1 dpkg-realpath.1 \
+	dpkg-scanpackages.1 dpkg-scansources.1 dpkg-shlibdeps.1 \
+	dpkg-source.1 dpkg-split.1 dpkg-statoverride.1 dpkg-trigger.1 \
+	dpkg-vendor.1 dpkg.1 dpkg.cfg.5 dsc.5 $(nil) $(am__append_1) \
+	$(am__append_2) $(am__append_3)
+CLEANFILES = $(man_MANS)
+EXTRA_DIST = \
+	deb-buildinfo.pod \
+	deb-changelog.pod \
+	deb-changes.pod \
+	deb-conffiles.pod \
+	deb-control.pod \
+	deb-extra-override.pod \
+	deb-old.pod \
+	deb-origin.pod \
+	deb-override.pod \
+	deb-postinst.pod \
+	deb-postrm.pod \
+	deb-preinst.pod \
+	deb-prerm.pod \
+	deb-shlibs.pod \
+	deb-split.pod \
+	deb-src-control.pod \
+	deb-src-files.pod \
+	deb-src-rules.pod \
+	deb-src-symbols.pod \
+	deb-substvars.pod \
+	deb-symbols.pod \
+	deb-triggers.pod \
+	deb-version.pod \
+	deb.pod \
+	deb822.pod \
+	dpkg-architecture.pod \
+	dpkg-buildflags.pod \
+	dpkg-buildpackage.pod \
+	dpkg-checkbuilddeps.pod \
+	dpkg-deb.pod \
+	dpkg-distaddfile.pod \
+	dpkg-divert.pod \
+	dpkg-fsys-usrunmess.pod \
+	dpkg-genbuildinfo.pod \
+	dpkg-genchanges.pod \
+	dpkg-gencontrol.pod \
+	dpkg-gensymbols.pod \
+	dpkg-maintscript-helper.pod \
+	dpkg-mergechangelogs.pod \
+	dpkg-name.pod \
+	dpkg-parsechangelog.pod \
+	dpkg-query.pod \
+	dpkg-realpath.pod \
+	dpkg-scanpackages.pod \
+	dpkg-scansources.pod \
+	dpkg-shlibdeps.pod \
+	dpkg-source.pod \
+	dpkg-split.pod \
+	dpkg-statoverride.pod \
+	dpkg-trigger.pod \
+	dpkg-vendor.pod \
+	dpkg.pod \
+	dpkg.cfg.pod \
+	dsc.pod \
+	dselect.pod \
+	dselect.cfg.pod \
+	start-stop-daemon.pod \
+	update-alternatives.pod \
+	utf8toman.sed \
+	po/ChangeLog.old \
+	po/po4a.cfg \
+	po/dpkg-man.pot
+
+
+# Extract the list of languages from the po4a config file.
+LINGUAS_DIST = `sed -ne 's/^.*\[po4a_langs\] \(.*\)$$/\1/p' $(srcdir)/po/po4a.cfg`
+PO4A_V = $(PO4A_V_@AM_V@)
+PO4A_V_ = $(PO4A_V_@AM_DEFAULT_V@)
+PO4A_V_0 = @echo "  PO4A   $@";
+PO4A_OPTS = --previous --srcdir $(srcdir) --destdir $(builddir) --no-backups \
+            --porefs file --msgmerge-opt=--add-location=file \
+            --package-name dpkg-man --package-version $(PACKAGE_VERSION) \
+            --copyright-holder "$(PACKAGE_COPYRIGHT_HOLDER)" \
+            --msgid-bugs-address $(PACKAGE_BUGREPORT)
+
+SUFFIXES = .pod .1 .5 .7 .8
+POD2MAN_V = $(POD2MAN_V_@AM_V@)
+POD2MAN_V_ = $(POD2MAN_V_@AM_DEFAULT_V@)
+POD2MAN_V_0 = @echo "  POD2MAN $@";
+POD2MAN_OPTS = --utf8 --center='dpkg suite' --release=$(PACKAGE_VERSION) \
+               --date='$(PACKAGE_RELEASE_DATE)'
+
+PODSUBST = sed \
+	-e 's/%PACKAGE%/$(PACKAGE)/g' \
+	-e 's/%VERSION%/$(PACKAGE_VERSION)/g' \
+	-e 's/%RELEASE_DATE%/$(PACKAGE_RELEASE_DATE)/g' \
+	-e 's:%CONFDIR%:$(sysconfdir):g' \
+	-e 's:%LOGDIR%:$(logdir):g' \
+	-e 's:%ADMINDIR%:$(admindir):g' \
+	-e 's:%PKGDOCDIR%:$(docdir):g' \
+	-e 's:%PKGCONFDIR%:$(pkgconfdir):g' \
+	-e 's:%PKGLIBDIR%:$(pkglibexecdir):g' \
+	-e 's:%PKGDATADIR%:$(pkgdatadir):g' \
+	$(nil)
+
+MANFIXUP = sed \
+	-f $(srcdir)/utf8toman.sed \
+	$(nil)
+
+@BUILD_POD_DOC_TRUE@MANGEN = $(POD2MAN_V) filename='$@'; \
+@BUILD_POD_DOC_TRUE@	  $(PODSUBST) $< | \
+@BUILD_POD_DOC_TRUE@	  $(POD2MAN) $(POD2MAN_OPTS) \
+@BUILD_POD_DOC_TRUE@	  --name="$$(basename $${filename%.*})" \
+@BUILD_POD_DOC_TRUE@	  --section="$${filename\#\#*.}" | \
+@BUILD_POD_DOC_TRUE@	  $(MANFIXUP) >$@
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .pod .1 .5 .7 .8
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign man/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-man1: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man1dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.1[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+install-man5: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man5dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.5[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man5:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man5dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.5[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
+install-man7: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man7dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man7dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man7dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.7[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man7dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man7dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man7dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man7dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man7:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man7dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.7[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man7dir)'; $(am__uninstall_files_from_dir)
+install-man8: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man8dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.8[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man8:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man8dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.8[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS) all-local
+installdirs:
+	for dir in "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man7dir)" "$(DESTDIR)$(man8dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1 install-man5 install-man7 install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-local uninstall-man
+
+uninstall-man: uninstall-man1 uninstall-man5 uninstall-man7 \
+	uninstall-man8
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am all-local check check-am clean clean-generic \
+	clean-libtool clean-local cscopelist-am ctags-am dist-hook \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man1 install-man5 install-man7 install-man8 \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am uninstall-local uninstall-man \
+	uninstall-man1 uninstall-man5 uninstall-man7 uninstall-man8
+
+.PRECIOUS: Makefile
+
+
+# If the user has not defined it let's use the default.
+LINGUAS ?= $(LINGUAS_DIST)
+
+all-local: all-local-@USE_PO4A@
+
+all-local-no:
+all-local-yes: gen-man
+
+.PHONY: gen-man
+
+gen-man: man.stamp
+	for lang in $(LINGUAS); do \
+	  files=""; \
+	  for man in $(man_MANS); do \
+	    tmpl="$${man%%.[0-9]}.pod"; \
+	    if [ -f "$(builddir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    elif [ -f "$(srcdir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    fi; \
+	  done; \
+	  if [ -n "$$files" ]; then \
+	    $(MKDIR_P) $$lang; \
+	    $(MAKE) mandir="$(mandir)/$$lang" man_MANS="" $$files; \
+	  fi; \
+	done
+
+# FIXME: Use a stamp file until po4a supports them internally.
+man.stamp:
+	$(PO4A_V) $(PO4A) $(PO4A_OPTS) $(srcdir)/po/po4a.cfg
+	$(AM_V_at) touch $@
+
+clean-local: clean-local-@USE_PO4A@
+
+clean-local-no:
+clean-local-yes:
+	rm -rf $(LINGUAS_DIST)
+	$(AM_V_at) rm -f man.stamp
+
+.PHONY: update-po
+
+update-po:
+	$(PO4A_V) $(PO4A) $(PO4A_OPTS) --force $(srcdir)/po/po4a.cfg
+
+.pod.1:
+	$(MANGEN)
+.pod.5:
+	$(MANGEN)
+.pod.7:
+	$(MANGEN)
+.pod.8:
+	$(MANGEN)
+
+install-data-local: install-data-local-@USE_PO4A@
+
+install-data-local-no:
+install-data-local-yes:
+	for lang in $(LINGUAS); do \
+	  files=""; \
+	  for man in $(man_MANS); do \
+	    tmpl="$${man%%.[0-9]}.pod"; \
+	    if [ -f "$(builddir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    elif [ -f "$(srcdir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    fi; \
+	  done; \
+	  $(MAKE) install-man mandir="$(mandir)/$$lang" man_MANS="$$files"; \
+	done
+
+uninstall-local: uninstall-local-@USE_PO4A@
+
+uninstall-local-no:
+uninstall-local-yes:
+	for lang in $(LINGUAS); do \
+	  files=""; \
+	  for man in $(man_MANS); do \
+	    tmpl="$${man%%.[0-9]}.pod"; \
+	    if [ -f "$(builddir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    elif [ -f "$(srcdir)/$$lang/$$tmpl" ]; then \
+	      files="$$files $(builddir)/$$lang/$$man"; \
+	    fi; \
+	  done; \
+	  $(MAKE) uninstall-man mandir="$(mandir)/$$lang" man_MANS="$$files"; \
+	done
+
+dist-hook: man.stamp
+	cp -p $< $(distdir)/
+	for lang in $(LINGUAS_DIST); do \
+	  cp -p $(srcdir)/po/$$lang.po $(distdir)/po; \
+	  if [ -e "$(srcdir)/po/$$lang.add" ]; then \
+	    cp -p $(srcdir)/po/$$lang.add $(distdir)/po; \
+	  fi; \
+	  if [ -n "`ls $(builddir)/$$lang/*.pod 2>/dev/null`" ]; then \
+	    $(MKDIR_P) $(distdir)/$$lang; \
+	    cp -p $(builddir)/$$lang/*.pod $(distdir)/$$lang/; \
+	  fi; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/po/ast.gmo dpkg-1.20.7.1/po/ast.gmo
--- dpkg-1.20.7.1-orig/po/ast.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/ast.gmo	2021-06-09 18:25:14.186502256 -0500
@@ -0,0 +1,334 @@
+���,�<H(?I(a�(=�(&))-P).~)�).�)�) 	*4**_*5{*-�*.�*0+1?+$q+4�+/�+�+(,$<,a,�,:�,6�,1-1E-!w-(�-�-�-�-).9/..i.'�.&�.�.3�.51/g/m/z/�/�/�/�/�/�/�/0=0RS01�0+�041!91,[1-�12�11�12.22-a2H�2Q�2A*3el3f�3794<q4B�4�45
#5 15R55k51�5�5�5#�5!"6D6a6K~65�6-7!.7P7-j75�7�7,�7.8.B8q8H�86�8(9>:9y9�9��9F:#S:-w:<�:�:[�:gU;�<�=0�=3>1Q>�>�>*�>2�>��>-�@/�@]�@[A`AGvA8�A,�A$B(CBlBqB�B:�B �B-�B	C C8CUC�\C�-D��D��E��F�TG&H'H�FH �H5�H,!I$NIsIu{I�I�I	J4J4KJ6�J!�J	�J.�J,K?K%^K�K%�K"�K&�KL.L;EL3�L�LA�LM&3M"ZME}M,�M"�M!N55N-kN5�N,�NG�N$DO7iO�O*�O"�O
P'P"?PbPyP=P*�PJ�P3Q"EQhQ�Q-�Q)�Q%�QR#RBR)WR�R�R!�R!�RS% S%FSlS�S!�S�S �S-�S#,T+PT%|T$�T�T �TU:URUlU�U�U$�U�UVV0VHV`V!�V:�V�V5�V 2W2SW%�W�W0�W*�W/(X6XXV�X.�X(Y+>Y)jY4�Y4�Y;�Y<:Z:wZ7�Z0�Z;[?W[$�[A�[$�[!#\E\cc\�\:�\< ]=]]�]�]&�]&�]'^ 3^'T^4|^)�^�^	�^k�^/h_"�_^�_@`[`%j`!�`�`�`�`�`Oa8\a*�a�a�a�a7�a5(b^b!~b�b�b5�b"	c4,c
ac oc%�cG�cP�cGOd?�d#�d7�d+3e2_eY�ef�e&Sf4zfF�f1�f;(gdg�g.�g.�g �ghD)hnh�h&�h-�h7�h%i-i.3ibiki�i�i�i)�i�i&
j4jMjB_jH�j0�j6k4Sk
+�k
+�k�k
+�k%�k%�k*l@lGl+\l+�l!�l$�l4�lF0m@wm,�mR�m'8n	`nZjn4�n2�n-oGIoY�o+�o%p1=p+opN�p3�p*qIq5cq2�q+�q+�q,$rQr"lr$�r*�r�r*�r0&s&Ws3~s4�s5�s)t,GtDtt*�t4�t&u#@u#du%�u(�u.�u9v'@v*hv.�v�v!�v4w46w[kw,�w4�w#)x,Mx/zx+�x-�x&y+yFyey }y2�y&�yB�y.;z1jz3�z�z*�z6{&R{4y{1�{+�{|"|"A|d|w|(�|�|S�|M$}(r}"�}�}�}�}`�}`T~��~OR�s��B�&Y�-��)��؁3��9�3U���:��8ނ9�)Q�%{�!��-Ã*��<2�+o�$��#��T�99�/s�4��)؅4�7�C�`�=��@��6��86�.o���9��;�*�.�;�P�]�u���������ˈG؈\ �:}�+��=�%"�3H�-|�>��A� +�9L�2��P��V
+�Ha�z��w%�<��Dڍ6�V�u���$��"ЎC�87�p���4��,؏"�(�ZE�D��:�% �#F�7j�8��ۑ,��:(�+c�$��L��I�8K�I��Γޓ�����'ǔ7�F'�n�e����G��ȘB��=#�=a�����$��:���B��59�Xo�Ȝ͜K�=-�1k� ��5������	�0�4M�:��
+��Ȟ#���
����������g��:�&����3�(ˤ?��:4�$o������"�4�F�;[�;��?Ӧ:�N�1W�-��#��1ۧ-
�1;�'m�3��$ɨ �\�Rl�3��M�-A�8o�7��Y�2:�4m�%��,ȫ-��0#�.T�T��"جT��"P�4s�-��֭��.�2�H�LO�1��Vή%�*9�d���5��'ׯ+��+�(1�Z�5q�!��"ɰ%�%�8�+X�-��&��ٱ$�&�#;�C_�*��>β(
�%6�\�&z���L���(�H� h�2����״#�!�*6�.a�4��Eŵ%�G1�-y�O��&��#�>B�=��C��U�qY�2˸-��;,�/h�<��DչN�Ni�K��K�FP�O��\�0D�[u�.Ѽ+�,,�sY�9ͽA�XI�T�����3(�-\�/��'��,�<�6L���	��d��-	�"7�sZ�T��#�-4�+b������� ��M��AK�1��
+������@��>8�w�*��!��.��F�4W�A��
��-��8
+�EC�h��j��O]�8��N��45�0j�^��w��7r�F��W��FI�;������?�AH�3����S���?�2Q�9��L��	��1�	N�,X�������8��&�B3�v���J��Q��;?�E{�O���!�.0�_�2l�1��.����:�6X�*��%��V��D7�9|�9��k��5\�	��x��F�J\�.��F��X�7v�.��7��I�P_�I��.��)�8C�:|�E��7��;5�q�&��0��6��/ �3P�C��(��K��I=�K��/��0�U4�9��7��6��-3�,a�1��6��B��O:�3��9��G�� @�)a�7��7��[��@W�C��+��7�:@�6{�<��6��%&�'L�'t�/��F��6�OJ�O��2��H�"f�/��7��)��>�;Z�0����*��+
�9�Q�0j�$��o��^0�8��3����� �z:�p��]w%�#k�G��c��z_���W�o�Z������h�p9�{��t�0���1��$�J�e��=�D�(�o}��v*EL ��Sd	2dQ5�a�-<�����,�=&�AB�	�<f��� m�l:�{]XHy�y�B��L��F6�r�m'9'�`0+N8an�K�H���b��
���J���f�_���@��?!�3
+t��V�M����w��4��GE������l�$��
+����qiXk��x8���C�6�~���F��v`r:�q|S����P������@U\u}~�K���T��\��+i����QC�4"�D;��7�s��n���&��^V(��Ouh����R.-������I|���2.Y,[�R�Y1T�Z���"%��/����be��)�!�IgpUAM
N�;^��#�>3�������*���x���c���5�>j������7��z�?g�/����[s�)���PWOj���
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s to be configured is %s.
+ %d in %s:  %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+%s breaks %s%s conflicts with %s%s corrupt: %s%s depends on %s%s enhances %s%s pre-depends on %s%s recommends %s%s suggests %s%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s requires one or more part file arguments--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<package status and progress file descriptor>Alternative %s unchanged because choice %s is not available.Authenticating %s ...
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNothing to configure.Package %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPriorityProcessing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+SelectionSetting up %s (%s) ...
+Skip unknown alternative %s.StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is no program which provides %s.Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+[default=N][default=Y][no default]alternative link is not absolute as it should be: %salternative path is not absolute as it should be: %sarchive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerauto modeawaiting trigger processing by another packagebroken due to failed removal or installationbroken due to postinst failurecan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile filename '%s' contains trailing white spacesconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdiversion by %s from: %s
+diversion by %s to: %s
+divert-to may not contain newlinesdiverted by %s to: %s
+done
+dpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror opening conffiles fileerror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind trigger interest file '%.250s'failed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to write details of '%.50s' to '%.250s'fgets gave an empty string from '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefork failedformat version numberignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!illegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal pending trigger name '%.255s': %sinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinvalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250slink %s is both primary and slavelocal diversion from: %s
+local diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemanual modemaster filemay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'multiple Conflicts and Replacesname %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s contained list as info filepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage diverts others to: %s
+package file MD5 checksumpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepre-dependency problem - not installing %.250sprioritypriority must be an integerpriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package fileremoval of %.250sremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filestatoverride file contains empty linestatoverride file is missing final newlinestatusstripping trailing /subprocess %s returned error exit status %dsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving uptoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers looping, abandonedtrying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)unable to (re)open input part file '%.250s'unable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to seek to start of %.250s after paddingunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to setenv for maintainer scriptunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat triggers deferred file '%.250s'unable to truncate for updated status of '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywarningwhile reading %s: %swhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?you must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.14.22
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:47+0200
+Last-Translator: Marcos Alvarez Costales <marcos.alvarez.costales@gmail.com>
+Language-Team: Asturian <softast-xeneral@lists.sourceforge.net>
+Language: ast
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+
+ disparadores pendientes de paquetes que nun son o pueden nun ser resolubles:
+
+El ficheru de configuración `%s', nun esiste nel sistema.
+Instalando el ficheru de config nuevu como se pidiera.
+     La versión del paquete ye la mesma que la cabera instalada.
+     nun ye un ficheru planu   %.255s
+  %.250s (versión %.250s) ta presente y %s.
+  %.250s (versión %.250s) va instalase.
+  %.250s ye %s.
+  %.250s ta instaláu, pero ye la versión %.250s.
+  %.250s nun ta instaláu.
+  %.250s va deconfigurase.
+  %.250s va instalase, pero ye la versión %.250s.
+  %.250s va desaniciase.
+  %.250s ta desempaquetáu, pero nunca nun se configuró.
+  %.250s ta desempaquetáu, pero ye la versión %.250s.
+  la cabera versión configurada de %.250s ye la %.250s.
+  %.250s ufre %.250s y ta presente y %s.
+  %.250s ufre %.250s y va instalase.
+  %.250s ufre %.250s pero ye %s.
+  %.250s ufre %.250s pero va desconfigurase.
+  %.250s ufre %.250s pero va desaniciase.
+  %s (%s) apurre %s.
+  El paquete %s ta esperando pol procesáu de disparadores.
+  El paquete `%s' entá nun se configuró.
+  El paquete «%s» nun s'instaló.
+  El paquete `%s' va desinstalase.
+  El paquete `%s' qu'apurre `%s' ta esperando al procesamientu de los disparadores.
+  El paquete `%s' qu'apurre`%s' entá nun se configuró.
+  El paquete `%s' qu'apurre %s nun s'instaló.
+  El paquete `%s' apurre `%s' pero va desinstalase.
+  La versión de `%s' nel sistema ye %s.
+  La versión de `%s' que se desconfigurará ye %s.
+ %d en %s:  %s (%s) france %s y ye %s.
+ %s (nun ye un ficheru normal)
+ ==> Guardando l'antiguu ficheru config como predetermináu.
+ ==> El distribuidor del paquete ufre una versión actualizada.
+ ==> Usando l'actual ficheru antiguu como se pidiera.
+ ==> Usando'l nuevu ficheru config como predetermináu.
+ ==> Usando un ficheru nuevu como se pidiera.
+ Paquete %s: parte(s) L'aición predeterminada ye instalar la versión nueva.
+ L'aición predeterminada ye conservar la versión actual.
+ y  depende de %s (subprocesu): %s
+%s fraña %s%s hai conflictu con %s%s corrompíu: %s%s depende de %s%s meyora %s%s pre-depende de %s%s encamienta %s%s suxier %s%s: el ficheru conf '%.250s' nun ye un simple ficheru o enllaz (= '%s')%s: el ficheru conf '%.250s' apunta a un nome dexeneráu
+ ('%s' ye enllaz simbólicu a '%s')%s: el ficheru config '%s' ye un enllaz circular
+ (= '%s')%s: falló enllazar '%.250s' a '%.250s': %s%s: falló desaniciar '%.250s' (enantes de sobreescribir): %s%s: falló al desaniciar '%.250s': %s%s: falló desaniciar la copia antigua '%.250s': %s%s: falló renomar '%.250s' como '%.250s': %s%s: nun pue lleese l'enllaz al ficheru conf '%s'
+ (= '%s'): %s%s: nun pue sabese l'estáu del ficheru config '%s'
+ (= `%s'): %s`%s' entra en conflictu con `%s''%s' contién un valor Priority '%s' definíu pol usuariucampu `%s', nome de paquete inválidu `%.255s': %snel campu `%s', falta el nome de paquete, o alcontróse basoria en cuenta'l nomeel campu `%s', referencia a `%.255s':
+ `%c' ta anticuáu, use `%c=' o `%c%c' en cuentacampu `%s', referencia a `%.255s':
+ rellación de versión errónea %c%cel campu `%s', referencia a `%.255s':
+ concasamientu esautu implicitu nel númberu de versión, úfrese usar `=' en cuentael campu `%s', referencia a `%.255s':
+ el valor de versión entama con un non-alfanuméricu, úfrese amestar un espaciuel campu `%s', referencia a `%.255s': versión nun terminadacampu `%s', error de sintaxis tres la referencia al paquete `%.255s'(Note la desaparición de %s, que trocóse ensembre.)
+(Lleendo la base de datos ... (ensin descripción disponible), volcáu de «core»la opción -%c nun lleva parámetrosla opción -%c lleva un parámetru--%s --pending nun garra dengún argumentu que nun seya una opción--%s --recursive necesita polo menos un argumentu camín--%s necesita <nome>--%s necesita <nome> <camín>--%s necesita un nome de ficheru .deb como argumentu--%s necesites un directoriu como parámetru--%s necesita un parámetru <file>--%s necesites un parámetru--%s necesita un direutoriu de destín.
+¿A lo meyor lo que quier facer ye dpkg --install?--%s necesita d'argumentu polo menos un ficheru d'archivu de paquete--%s necesita polo menos un nome de paquete como argumentula opción --%s nun lleva parámetrosla opción --%s lleva un parámetru--%s requier ún o más argumentos de ficheru de partes--%s toma como muncho dos argumentos (.deb y direutoriu)--%s nun toma dengún argumentu--%s toma namái un argumentu (ficheru .deb)--auto requier esautamente un ficheru parte como argumentu--auto requier l'usu de la opción --outputmala relación de --compare-versions--compare-versions lleva trés argumentos: <versión> <relación> <versión>--search necesita a lo menos un patrón de nome de ficheru como argumentu--split necesita un nome de ficheru fonte como argumentu--split toma como muncho un nome de ficheru fonte y un prefixo de destín; por embargu:
+<compress> dende tar -cf<deb> ye'l nome de ficheru d'un ficheru en formatu Debian.
+<cfichero> ye'l nome d'un componente de ficheru alministrativu.
+<ccampo> ye'l nome d'un campu nel ficheru de `control' principal.
+
+<descompresión><link> y <path> nun pueden ser lo mesmo<estáu de paquete y descriptor de progresu de ficheru>Alternativa %s ensin camudar porque la eleición %s nun ta disponible.Autentificando %s ...
+Órdenes:
+  --check-supported                     Compreba si'l programa dpkg soporta disparadores.
+
+Ordes:
+  -s|--split <ficheru> [<prefixu>]       Taraza un archivu.
+  -j|--join <parte> <parte> ...            Xunta partes.
+  -I|--info <parte> ...          Amuesa información sobro una parte.
+  -a|--auto -o <completu> <parte>         Auto-acumula partes.
+  -l|--listq                                   Llista trozos que nun concasen.
+  -d|--discard [<ficheru> ...]   Descarta trozos que nun concasen.
+
+Los operadores de comparación pa --compare-versions son:
+lt le eq ne ge gt (remana una versión inexistente como anterior a
+cualquier versión;
+lt-nl le-nl ge-nl gt-nl (remana una versión inexistente como posterior a
+cualquier versión;
+< << <= = >= >> > (sólo por compatibilidá cola sintaxis de los
+ficheros de control).
+
+Debian %s versión %s.
+Versión `%s' del sistema de xestión de paquetes de Debian `%s'.
+Programa de xestión de paquetes "%s" de Debian versión %s.
+ferramienta de división/unión de Debian `%s'; versión %s.
+Desinstaláu %s.
+DescripciónAlcontráronse errores al procesar:
+El ficheru `%.250s' nun ye parte d'un archivu multiparte.
+Sintaxis del formatu:
+  Un formatu ye una cadena que s'amosará pa cada paquete. El formatu
+  puede incluyir les secuencies d'escape estándares \n (nueva llinia),
+  \r (retornu de carru) o \\ (barra invertía). Puede incluyise
+  información sobro'l paquete inxertando referencies variables a los
+  campos del paquete usando la sintaxis ${var[;width]}. Los campos
+  alliniaránse a la drecha a menos que'l anchor seya negativu, nesi
+  casu alliniaránse a la esquierda.
+Instalando la versión nueva del ficheru de configuración %s ...
+Queden ficheros puxarra nel direutoriu de depósitu:
+¡Desempaquetóse más d'una copia del paquete %s!
+Va configuráse solamente una vegada
+NomeRen que configurar.El paquete %s ta reteníu, nun va tocase. Use --force-hold pa cambiar esto
+Paquete %s llistáu más d'una vegada, sólo se procesa una.
+El paquete `%s' nun contién dengún ficheru (!)
+Paquetes entá ensin atornizar:
+Parte %d del paquete %s archivada (entá se necesita Camíncampu Pre-DependenciesPrioridáParose'l procesu porque hubo demasiaos errores.
+Rexistrada la información sobro %s a partir de %s.
+Trocando información de paquetes disponibles, usando %s.
+SeleiciónConfigurando %s (%s) ...
+Nun s'alcuentra una alternativa %s.EstáuLos paquetes siguientes tan esperando pol procesamientu de los activadores
+que activaron n'otros paquetes.  Esti procesamientu pue solicitase usando
+dselect o dpkg --configure --pending (o dpkg --triggers-only):
+Los siguientes paquetes tan tracamundiaos por problemes graves demientres
+la instalación.  Hai que los reinstalar pa que funcionen correutamente (ellos y
+los demás paquetes que dependen d'ellos):
+Los siguientes paquetes tan a medio configurar, quiciabes por problemes al
+configuralos la primera vegada.  Habría que volver a tentar configuralos usando
+dpkg --configure <package> o la opción configure del menú de dselect:
+Los siguientes paquetes tan a medio instalar,  por problemes demientres
+la instalación.  Quiciabes pueda completase la instalación volviendo a tentalo;
+los paquetes puen desaniciase usando dselect o dpkg --remove:
+Los paquetes siguientes activáronse, pero el procesamientu d'activadores
+entá nun se fizo.  El procesamientu d'activadores pue solicitase usando
+dselect o dpkg --configure --pending (o dpkg --triggers-only):
+Los siguientes paquetes desempaquetáronse pero nun tan configuraos.
+Hai que los configurar usando dpkg --configure o la opción configure del
+menú de dselect pa que funcionen:
+Nun hai dengún programa qu'apurra %s.En acabando, escribir `exit'.
+Escribi dpkg-deb --help pa obtener aida sobre remanamientu de ficheros .deb;
+Escribi dpkg --help pa obtener aida sobre instalar y desinstalar paquetes.Escriba dpkg-split --help pa tener aida.Escriba dpkg-trigger --help pa obtener aida d'esta ferramienta.Anovando información de paquetes disponibles, usando %s.
+Emplegu: %s [<opción> ...] <orde>
+
+VersiónLa versión de dpkg con sofitu activu pa %s aínda nun ta configurada.
+ Por favor, use 'dpkg --configure dpkg', y vuelva a tentalo.
+[predeterminao=N][predeterminao=Y][ensin predetermín]l'enllaz alternativu, nun ye absolutu y tendría de ser: %sel camín alternativu nun ye absolutu y tendría de ser: %sl'archivu contenía un oxetu `%.255s' de triba desconocía 0x%xel ficheru nun tien carauteres de nueva llinia na cabeceramou autoesperando a que otru paquete procese disparadoresfrancíu por un desaniciu o instalación malafrancíu por un fallu en 'postinst'nun puede executase mmap sobro'l ficheru `%.255s'nun puede desaniciase'l script postrm antiguunun puede executase stat sobro'l ficheru `%.255s'nun puede abrise `%.255s' (en `%.255s')nun puede abrise'l ficheru parte d'archivu `%.250s'nun puede lleese'l direutoriu `info'nun se puede desaniciar `%.250s'nun puede desaniciase l'antiguu ficheru de configuración de respaldu `%.250s'
+(de `%.250s')nun se puede desaniciar el ficheru de configuración antiguu `%.250s' (= `%.250s')nun puede desaniciase la llista de ficheros antiguanun pueden satisfacese les pre-dependencies pa %.250s (necesaries por %.250s)nun se puede desaminar el direutoriu `%.255s'nun puede desaminase'l direutoriu d'anovaciones `%.255s'nun puede efeutuase `stat' sobro `%.255s' (en `%.255s')el caráuter `%c' nun ta permitíu (namái se permiten lletres, díxitos carauteres `%s')el conffile `%.250s' nun apaez dientro del paquetenun puede efeutuase `stat' sobro'l conffile `%.250s'conffile '%s' nun ye un ficheru planuel conffile '%s' contién espacios en blancuaiciones en conflictu -%c (--%s) y -%c (--%s)desvíos conflictivos sobre `%.250s' ou `%.250s'conflictu ente paquetes - nun s'instala %.250sel direutoriu de control tien permisos erróneos %03lo
+(tien de ser >=0755 y <=0775)nun puede lleese'l direutoriu infonun pudo efeutuase stat al fichero antiguu '%.250s' polo que nun se desaniciará: %snun se pudo abrir `%i' pa un fluxuproblemes de dependencies - déxase ensin configurarproblemes de dependencies - nun se desinstalaesviáu por %s de: %s
+esviáu por %s a: %s
+«divert-to» nun puede tener saltos de lliniaesviáu por %s a: %s
+fecho
+dpkg nun ta rexistráu como instaláu, ¡nun pue comprobase'l sofitu pa %s!
+paquete de disparador esperáu duplicáu `%.255s'interés de disparador de ficheru duplicáu pal ficheru `%.250s' y el paquete `%.250s'camín duplicáu %sactivador de pendientes `%.255s' duplicáuenllaz esclavu duplicáu `%s'valor duplicáu pal campu `%s'valor duplicáu pal campu definíu pol usuariu `%.*s'cadena erma de fgets al lleer conffilesnun se permiten nomes de disparadores ermosepochla época na versión nun ye un númberufallu al zarrar %.250sfallu al zarrar el ficheru de configuración `%.250s'error al zarrar/escribir `%.255s'error al criar el preséu `%.255s'error al criar el direutoriu `%.255s'error al criar l'enllaz duru `%.255s'error al criar el tubu `%.255s'error al criar l'enllaz simbólicu `%.255s'fallu al asegurase de que `%.250s' nun existefallu al abrir el ficheru de conffilesfallu al lleer %.250sfallu al lleer %s del ficheru %.255sfallu al lleer el ficheru de conffileserror al lleer del tubu de dpkg-debfallu al lleer los disparadores del ficheru dereferenciáu `%.250s'error al afitar el propietariu de `%.255s'error al afitar el propietariu de l'enllaz simbólicu `%.255s'error al afitar los permisos de `%.255s'error al afitar les dates de `%.255s'fallu intentando abrir %.250sfallu al non remanar la señal %s: %s
+fallu al escribir `%s'error al escribir en stderr, descubiertu enantes del prompt del ficheru conffalló al asignar memoriafalló al camudar al direutoriu `%.255s'falló al camudar al direutoriufallu al facer chroot a `%.250s'falló al zarrar dempués de la llectura: `%.255s'falló al crear direutoriufalló al criar tuberíafalló al efeutuar `dup' pa `fd' %dfalló al efeutuar `dup' pa std%sfalló al efeutuar `fstat' sobro'l ficherufallu al facer `fstat' del ficheru de desvíosfallu al facer `fstat' del ficheru de `statoverride'falló al abrir el ficheru de configuración '%.255s' pa llectura: %sfallu al abrir el ficheru de desvíosfallá al abrir el ficheru d'información del paquete `%.255s' pa lleerfallua al abrir el ficheru de  "statoverride"nun puede abrise'l nuevu ficheru de llista d'intereses de disparadores `%.250s'falló al lleer `%.255s' (en `%.255s')falló al lleer el ficheru `%.255s'fallu al desaniciar el ficheru d'anovación incorporáu %.255sfallu al desaniciar el mio propiu ficheru d'anovación %.255snun puede rebobinase'l ficheru d'intereses de disparadores `%.250s'falló amosar l'estáu (siguiendo enllaces) de l'enllaz simbólicu esistente `%.250s'falló amosar l'estáu (siguiendo enllaces) del destín del enllaz nuevu `%.250s' pa l'enllaz simbólicu `%.250s'falló escribir los detalles de `%.50s' a `%.250s'fgets tornó una cadena balera dende `%.250s'el nome del campu `%.*s' tien de tar siguíu por dos puntosel ficheru `%.250s' ta frañáu - falta %.250s"el ficheru `%.250s' ta frañáu - suma MD5 `%.250s' erróneael ficheru `%.250s' ta frañáu - díxitu fallíu (códigu %d) en %sel ficheru `%.250s' ta frañáu - maxa errónea al final de la
+primer cabecerael ficheru `%.250s' ta frañáu - maxa errónea al final de
+la segunda testerael ficheru `%.250s' ta frañáu - caráuter d'enllenu erróneu (códigu %d)el ficheru `%.250s' ta frañáu - falta una nueva llinia dempués de %.250sel ficheru `%.250s' ta frañáu - hai nulos na seición d'informaciónel ficheru `%.250s' ta frañáu - el segundu miembru nun ye un miembru
+de datosel ficheru `%.250s' ta frañáu - el tamañu ta enquivocáu pol
+númberu de parte conseñáuel ficheru `%.250s' ta frañáu - enforma curtiuel ficheru `%.250s' ta frañáu - númberu enquivocáu de partes pa los
+tamaños conseñaosel ficheru `%.250s' nun ye una parte d'archivuel ficheru `%s' nun ye una parte d'archivu
+el ficheru nun pue contener saltos de lliniael ficheru de rexistros de disparadores menciona un nome de paquete illegal `%.250s' (nel ficheru `%.250s'): %.250sel nome de ficheru «%s» nun ye un allugamientu absolutulos ficheros `%.250s' y `%.250s' nun son partes del mesmu ficheruel ficheru de llista de ficheros del paquete `%.250s' contién un nome de ficheru vacíuel ficheru de llista de ficheros del paquete '%.250s' contién una llinia final ermafalló en `fork'formatu de númberu de versiónescaeciendo'l frañamientu, ¡pue siguise lo mesmo!escaeciendo'l conflictu, ¡pue siguise igual!inorando el problema de dependencies con %s:
+%sdescartando problema de predependencia!nome de paquete illegal na llinia %d: %.250snome de paquete illegal nel disparador esperáu `%.255s': %snome illegal pa l'activador de pendientes `%.255s': %sinstalación de %.250sinstaláuinstalar %.250s frañaría %.250s, y la
+ desconfiguración ta torgada (--auto-deconfigure pue aidar)instalar %.250s frañaría software esistenteenteru inválidu pa --%s: `%.250s'síntaxis desconocida o inválida nel nome del disparador `%.250s' (nel disparador interesáu pal paquete `%.250s')nome de paquete inválidu `%.250s' na llista de disparadores dereferenciaos `%.250s'estáu inválidunome de disparador inválidu `%.250s': %.250sl'enllaz %s ye a la vez principal y esclavuesviación llocal de: %s
+esviación llocal a: %s
+esviáu llocalmente a: %s
+nomes de ficheros abondo llargosel script `%.50s' tien permisos erróneos %03lo
+(tien de ser >=0555 y <=0775)el script `%.50s' nun ye un ficheru normal o un enllaz simbólicunun puede efeutuase `stat' sobro'l script `%.50s'mou manualficheru mayestrunun pue ser una cadena ermanun concasa al esviar-pa
+  al desaniciar `%s'
+  alcontróse `%s'nun concasa el paquete
+  al desaniciar `%s'
+  alcontróse `%s'abondos Troques y Conflictosel nome %s ye a la vez principal y esclavunecesítase una opción d'aiciónnueva llinia dientro del nome del campu `%.*s'los saltos de llinia tan torgaos nos ficheros update-alternatives (%s)nun hai denguna información de paquetes en `%.255s'nun ta instaláu dengún paquete nomáu `%s', nun pue configurasenon instaláunon instaláu pero queda la so configuraciónnun hai res tres los dos puntos nel númberu de versiónel conffile antiguu '%.250s' yera un direutoriu ermu (y desanicióse)el ficheru antiguu '%.250s' ye'l mesmu que dellos de los nuevos ficheros! (tantu '%.250s' como '%.250s')la versión antigua del paquete tien un nome de ficheru d'información
+llarguísimu qu'entama per `%.250s'l'apertura del componente `%.255s' (dientro de %.255s)
+falló de mou inesperáumemoria escosada pa una nueva entrada de reorganizaciónmemoria escosada pa la entrada de reorganización nueva con munchos argumentosavisu, saltando'l problema por tar activao --force: el paquete %.250s yá ta instaláu y configuráuel paquete %.250s nun ta preparáu pa configurase
+ nun pue configurase (estau actual `%.250s')el paquete %.250s nun ta preparáu pa procesar disparadores
+(l'estáu actual ye `%.250s' ensin disparadorse pendientes)el paquete %s contién list como ficheru d'informaciónl'arquitectura del paquete (%s) nun correspuende cola del sistema (%s)el paquete contién un nome de ficheru d'información llarguísimu
+(entama con `%.50s')la información de control del paquete contién el direutoriu `%.250s'package control info rmdir of `%.250s' didn't say not a direl paquete esvía otros a: %s
+ficheru paquete MD% checksumel paquete tien l'estáu %s pero los disparadores tán n'esperael paquete tien l'estáu %s pero los disparadores tán pendientesel nome de paquete nun puede tener saltos de llinianome paqueteel nome del paquete tien carauteres que nun son minúscules, alfanuméricos
+o `-+.'paquete de númberu de versiónfalta la parte %del ficheru parte `%.250s' nun ye un ficheru normalel tamañu de la parte ye abondo grande o nun ye positivuel tamañu de la parte tien de ser polo menos %d KiB (p'almitir una testera)correuto
+apegarproblema de predependencia - nun s'instala %.250sprioridáel valor de prioridá tien que ser un enteruprioridá de %s: %serror de llectura en %.250serror de llectura en `%.250s'fallu de llectura nel ficheru de configuración `%.250s'fallu de llectura na entrada estándarerror de llectura na entrada estándar nel prompt del ficheru confpaquete reensambláueliminación de %.250sdesaniciando l'alternativa escoyida a mano, camudando %s a mou automáticurenomar obliga a sobreescribir `%s' con
+un ficheru distintu `%s', nun se permite.la operación solicitada precisa privilexos de superusuariuguetao, pero nun s'alcontraron paquetes (ficheros que concasen *.deb)alcontráronse delles entraes d'información de paquetes, namái se permite unaficheru esclavuenllaz esclavul'enllaz esclavu ye'l mesmu que'l principal %snome esclavuel ficheru fonte `%.250s' nun ye un ficheru normalel ficheru `statoverride'  tien una llinia balerael ficheru statoverride tien una llinia baleraestáutarazando la cabera /el subprocesu %s devolvió el códigu de salida d'error %derror sintáuticu nel ficheru de disparadores `%.250s'fallua al abrir el ficheru de statoverridedpkg-trigger toma namás un argumentol'oxetivu ye un direutoriu - nun puede omitise la comprebación del ficheru
+de controlhai delles versiones de la parte %d - a lo menos `%.250s' y `%.250s'nun hai un script na versión nueva del paquete - colandollinia mui llarga o retornu de llinia perdíu en `%.250s'fallu sintácticu nel ficheru d'intereses del disparador `%.250s'; nome de paquete illegal `%.250s': %.250sel nome del disparador contién carauteres inválidosdisparáuficheru de disparadores ci `%.250s' contién una síntaxis de disparador illegal nel nome de disparador `%.250s': %.250sel ficheru ci d'activadores contién la directiva desconocida `%.250s'el ficheru ci d'activadores contién una sintaxis de directiva desconocidalos disparadores entraron en bucle, desdexandotentando sobrescribir `%.250s', que ye la versión esviada de `%.250s'tentando sobrescribir `%.250s', que ye la versión esviada de `%.250s' (paquete: %.100s)nun puede (re)abrise'l ficheru parte d'entrada `%.250s'nun puede comprobase la esistencia de `%.250s'nun puede comprebase la esistencia del ficheru `%.250s'nun pue camudase'l dueñu de l'enllaz simbólicu de seguridá pa `%.255s'nun pue llimpiase'l baruyu al rodiu de `%.255s' enantes d'instalar otra versiónnun puede zarrase'l nuevu ficheru dereferenciáu de disparadores `%.250s'nun pue zarrase l'estau actualizau de `%.250s'nun puede crease '%.255s'imposible criar `%.255s' (mientres se procesab `%.255s')nun pue criase'l direutoriu d'estau d'activadores `%.250s'nun se puede desaniciar el ficheru d'información de control `%.250s'nun puede desaniciase'l direutoriu antiguu '%.250s': %snun puede desaniciase'l ficheru de depósitu usáu `%.250s'nun se puede descartar `%.250s'nun puede enllenase %.250s con rellenunun puede facese `flush' %.250s tres del rellenunun pue facese'l vaciáu del estáu actual de '%.250s'nun se puede facer `stat' sobre'l ficheru fontenun pue sincronizase l'estau actualizau de `%.250s'nun se pudo inorar la señal %s enantes d'executar el script %.250snun pue instalase `%.250s' como `%.250s'nun puede instalase'l (supuestamente) nuevu ficheru d'información `%.250s'nun puede instalase'l nuevu ficheru d'información `%.250s' como `%.250s'nun puede instalase'l nuevu ficheru dereferenciáu de disparadores `%.250s'nun pue instalase la versión nueva de `%.255s'nun pue instalase l'estau actualizau de `%.250s'nun pue facese l'enllaz de seguridá de `%.255s' enantes d'instalar la versión nuevanun pue facese enllaz simbólicu de seguridá pa `%.255s'nun pue apartase `%.255s' pa instalar la versión nuevanun puede abrise'l nuevu ficheru de depósitu `%.250s'nun puede abrise'l ficheru de salida `%.250s'nun se puede abrir el ficheru fonte `%.250s'nun puede abrise'l direutoriu de control temporalnun puede abrise'l ficheru de disparadores ci `%.250s'nun puede abrise'l ficheru de disparadores dereferenciáu `%.250s'nun puede abrise/criase'l nuevu ficheru de disparadores dereferenciáu `%.250s'nun puede lleese'l direutoriu de depósitu `%.250s'nun puede lleese'l nuevu ficheru de disparadores `%.250s'nun pueden lleese les propiedaes del descriptor de ficheros pa `%.250s'nun pue lleese l'enllaz `%.255s'nun puede lleese'l ficheru parte `%.250s'nun pue quitase la nueva versión estrayía de `%.250s'nun pue quitase la nueva versión instalada de `%.250s'nun pue quitase la nueva versión instalada de `%.250s' pa reinstalar la copia de seguridánun puede desaniciase'l ficheru d'información obsoletu `%.250s'nun puede renomase'l nuevu ficheru de depósitu `%.250s' a `%.250s'nun puede reabrise'l ficheru parte `%.250s'nun pue restaurase la versión de seguridá de `%.250s'nun puede tornase al entamu de %.250s dempués del rellenunun puede afitase l'atributu close-on-exec pa `%.250s'nun se pudieron establecer permisos d'execución en `%.250s'nun pue efeutuase setenv pal programa de caltenimientunun se pudo facer stat de %s `%.250s'nun pudo facese stat de %s '%.250s': %snu se puede facer `stat' sobre `%.250s'nun puede abrise direutoriu de control temporalnun s'atopó l'estau del ficheru config `%.250s' instaláu actualmentenun puede efeutuase `stat' otru ficheru nuevu `%.250s'nun pue amosase l'estáu de `%.255s' restaurau enantes d'instalar otra versiónnun puede facese `stat' sobro'l ficheru dereferenciáu de disparadores `%.250s'nun pue tronzase pa l'estau actualizau de `%.250s'nun puede abrise'l nuevu ficheru dereferenciáu de disparadores `%.250s'nun puede escribise l'estáu fd %dnun puede escribise l'estáu actual de '%.250s'datos inesperaos tres el paquete y esbilla na llinia %dfin de ficheru inesperáu en %s en %.255sfin de llinia inesperáu tres el nome del paquete na llinia %dfin de llinia inesperáu nel nome del paquete na lllinia %dfin de llinia inesperáu en ficheru statoverrideargumentu `%s' desconocíu¡triba de compresión «%s» desconocía!opción «force/refuse» desconocía `%.*s'opción -%c desconocíaopción --%s desconocidaestáu deseyáu desconocíu na llinia %d: %.250sdesempaquetáu pero ensin configurarel direutoriu d'anovaciones contién el ficheru '%.250s', y el so nome ye enforma grande (llonxitú=%d, max=%d)el direutoriu d'anovaciones contién el ficheros con nomes de llonxitudes diferentes (%d y %d)nome de campu definíu pol usuariu `%.*s' enforma curtiula cadena de versión tien espacios nel so interiorla cadena de versión ta ermaavisumientres se lleía %s: %sal desinstalar %.250s, nun se puede desaniciar el direutoriu '%.250s': %s - ¿el direutoriu puede ser un puntu de montaxe?Tienes qu'especificar los paquetes polos sos nomes propios, ensin citar los nomes
+de los ficheros nos que vienen
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/boldquot.sed dpkg-1.20.7.1/po/boldquot.sed
--- dpkg-1.20.7.1-orig/po/boldquot.sed	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/boldquot.sed	2021-06-09 18:22:47.473275398 -0500
@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“[1m/g
+s/”/[0m”/g
+s/‘/‘[1m/g
+s/’/[0m’/g
diff -Naurp dpkg-1.20.7.1-orig/po/bs.gmo dpkg-1.20.7.1/po/bs.gmo
--- dpkg-1.20.7.1-orig/po/bs.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/bs.gmo	2021-06-09 18:25:14.214502298 -0500
@@ -0,0 +1,16 @@
+��\���������� �	
+  depends on DescriptionNameType 'exit' when you're done.
+Versiondone
+warningProject-Id-Version: dpkg 1.13
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 10:02+0200
+Last-Translator: Safir Šećerović <sapphire@linux.org.ba>
+Language-Team: Bosnian <lokal@linux.org.ba>
+Language: bs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2)
+zavisi oOpisNazivUkucajte `exit' kada završite.
+Verzijaurađeno
+upozorenje
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/ca.gmo dpkg-1.20.7.1/po/ca.gmo
--- dpkg-1.20.7.1-orig/po/ca.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/ca.gmo	2021-06-09 18:25:14.273502389 -0500
@@ -0,0 +1,945 @@
+��V�"�|E�\?�\a�\ C]kd]��]��^&_=@_&~_�_-�`.�`a.'aVa ra4�a�a5�a-b.Hb0wb1�b$�b4�b/4cdcq|c(�c$d<d\d:|d6�d1�d1 e!Re2te(�e�e�e!�ef4fRfcf.rf�fS�fgg1g9Igm�g)�g:h9Vh.�h'�h&�hi3$i5Xi�i�iP�i\�ivOj[�jU"kxk�k�k�k�kZ�k*l;l�Jlm=/mmm�m-�m+�m�m)n5nDn�Yn=5pRsp1�pD�pL=qA�q'�q&�q(r'Dr+lr4�r!�r,�r9s-Vs�s#�s�s$�s
+t"'tJt!ht#�t�t�t�t�t�t"u2Bu1uu/�u'�u�u.vEv<`v�v-�vR�vH8wQ�wA�wexf{xI�x/,y7\y<�y7�y	z(zBEz�z�z�z
�z �z�z5{1K{@}{0�{�{|#|!>|`|}|K�|7�|5}-T}�}!�}�}'�}-~-.~ \~5}~�~ �~�~"!/"Q!t$�,�.�.�.F�u�H��6ހ(�>>�$}� ��Á�����
���Â#ڂ:��-9�g�x�����*��<ӄ#�-4�-b����%�2�5I���[u��ч\̋�)�g�
M�[�s�(��-���8��<8�.u���0��3�1 �R�_�z����0;�1l�*��Jɝ2��G�&�/�2C�Ev�V���5,�.b�-��+��/�
�%)�/O�*�&��!Ѣ+�B�]b���!ţM�5�2K��~��*�G§!
+�",�O�4n�.��2ү5�3;�o�G�8ǰ,�-�(L�u�z���G���3��)-�$W�:|�,��V� ;�\�*x�����&ȳ3�-#�+Q�?}�,��	���
+�*"�M�c� ��H������¶gu�jݷ�H��#�4�5&��\��$���u��&�A8�{z�!��,�*E�.p�������B� ��5��� 4�,U�$��.��>��*�;@�,|�#��L��>��Y�����;��"�u*����"y�������9��(��X$�3}�?��8��2*�1]�,��:��4��5,�4b�,��A��M�-T�����#�������� 1�1R�%��8��?��"#�BF�6����5��&�.9�!h�!��5�������*�>�S�	f�9p�.��#����,�J�$i�����%����%�8�-S�1������)��1�:D�?�&����=�7A�y�!��.��*��7�#G�k�"z�&������0��$�:3�n���@��+��;
�3I�}���A����&�-=�#k�0��;��0��(-�?V�)��-����"�� �6�#P�4t�E����
+�,!�"N�!q���$��5�� 
�8.�g�v�-��5��,��B&�Bi�+��G��$ � E�:f�;��3��=�O�h�&w�/����7��"�D@�c����2��*(�"S�3v�:��-��(�&<�c�}�����"����W�Y�(_�����=��*��J�b�"t�������-�� �5�)F�%p���#��@��@�'W���������������)&�P�o�!��!��#����%�%9�'_�,��������*	�'4�'\���!���� ��-��#'�#K�+o�%��$���� �#�;�T�g�"}�:����F��<�X�u�$���������#�<�T�!t�"��:����5� I�2j���%����0��*#�$N�/s���6��V��"@�(c���<��.��)�(2�*[�+����,��)��4%�3Z�2��4��;��<2�6o�:��7��@�0Z�;��?��$�A,�=n�>��$��0�!A�c�b~���c��c�:��<��=��_7�#��H����0�J�)`�)��+��+����$����� ��2�\��&�&:�'a� ��7��t��2W�-��'��4��.�)D�Gn�-����	���k$�/������>��%#�$I�#n�&��!����!��"�^?�@��&��"?[j!����(%Hn+�7�!�*(2[u����O�87*p����3�
%7@5x��|�
+T_m0�Gf)�!���3$R5w%���"�4!V!tC�=�%	o>	
�	 �	(�	
+%#
+7I
+�
+�
+I�
+.�
+6+!b��G�P�GM.�?�#
7(
#`
�
+�
2�
Yf]L�hMz&�K�3;=o��=�'4<(qF�1�;&Ov��%�/�2$8W-�-�.�.aJe� 3 @Da?��/&B-i7�����T.j���"��2
@U)l�&�"�"�" C6\��7�B�H?&�0�<�Om�:�6�%5$G4l��O�
++
+6A
+a%l�%�*��
+&7R+�!�M�$&4KF�@�% 6. 1e A� � ,� B !,c!#�!R�! "'("$P"	u"Z"4�"2#'B#j#�#.�#D�#G$YY$Q�$^%%d%+�%G�%/�%2.&%a&%�&1�&8�&+'ND'�'!�'3�'*(.(5H(~("�($�(2�(+)+@),l)�)�)"�)$�)*!0**R*}**�*0�*0�*&&+3M+4�+5�+)�+,,C,DU,*�,4�,�,-0-&I-#p-#�-%�-(�-..>6.9u.9�.1�."/'>/*f/.�/�/!�/�/(0(>04g04�0[�0,-14Z1#�1,�1"�1"2/&2/V2+�2+�2-�2*3&73!^3�3�3�3 �32�30&4&W4B~4#�4.�4525O5 h51�5�5�5!�536?6*_6�6�66�64�6,'7&T71{7 �7'�7.�7%84=81r8+�8#�8�8
+9"'9J9i9"�9�9�9�9��9��:h;!�;(�;�;#�;$<$5<(Z<�<:�<"�<#=S$=Mx=E�=>(%>(N>*w>:�>.�>0?"=?I`?�?4�?�?
+@(*@S@"k@�@�@�@�@�@�@BA`UA9�A�A'B#/BASB`�B{�BCrDk�D%"E�HE��E��F,yGN�G'�GH,:I-gI�I:�I�IJ;!J]J<}J<�J:�J-2K.`K'�K4�K5�K"Lz:L<�L+�L%M%DMLjM4�M5�M5"N2XNI�N7�N
O+'O4SO#�O&�O�O�O/�O(PK4P�P�P�PJ�PzQ=�QK�QGR7gR<�R5�RS7'S7_S�S�SU�Sb�S�`Tn�TXZU�U�U�U�UV^VzV
�V��V�WW�W�WX<X9XX)�X:�X�XYYT+[j�[I�[Y5\o�\]�\>]]=�]=�]<^7U^B�^%�^F�^M=_?�_5�_=`7?`?w`4�`<�`6)a>`a>�a)�a&b-/b/]b;�b0�bX�bLSc8�c/�c"	d;,d$hdH�d$�d@�dk<ea�eb
+f]mf��f�Tgf�gBLhH�hS�h?,i'li4�iF�i%j%6j\j!pj!�j�j;�j:kHJkC�k�k�k3	l.=l#ll �lG�lF�l5@m6vm�m"�m�m:n5Kn9�n%�n5�n#o%;oao5~o0�o2�o+p.Dp*sp:�p9�p+q&?qFfq=�q6�qA"r(dr-�r�r�r�r�r�
+s�s�s*�s]t5|u�u�u�u�u0vK7v*�v3�v5�v�w�w�w=�wY&xd�yy�y_~�v���#���Տ��1��4ؑ"
�R0�Q��;Ւ�:(�<c�5��֓����@Ԕ5�"K�\n�7˕��)�/�IC�i��c��[�8x�;��H�-6�6d���-��1��&2�Y�<w�W��X�e�2i�S���D��P������L��Ԩ ��9�.H�1w�2��=ܩ�S2�@��*Ǫ"�4�J�P�,a�\��	�9��6/�3f�*��;Ŭ\�7^�!��5��#��*,�:W�H��9ۮU�>k�	��#��د+��$�$C�-h�Z�������̱k��n��q��Z�-C�8q��������Q���'��I�����&��8��8�=(�f�*�����2k�K��"�-
�H;�'��B��X�AH�\��?�1'�SY�K��������~�9����p���M�'C�k�{���E��-��j�9��E��@�>I�=��4��D��?@�=��A��3�J4�Z�?���$5�9Z�,������
��'��6�(<�=e�N��'��U�<p�'��D��.�=I�9��0��D��$7�"\��#��������R�AU�-�� ��@��&'�2N�.��1��H��(+�0T�"��>��A��)�.C�5r�>��H��Q0�,��'��Q��D)�n�3��<��:��Z9�<����*��1�#E� i�@����]��&A�h�J��6��f�Mo�.��+��M�*f�=��+��/��K+�Sw�>��3
+�O>�4��=���3!�'U�-}�0��?��[�'x�#��/��-��*"�(M�.v�:��)��W
+�b�!��,��9��0�D<�M��9��N	�+X�'��N��P��@L�M������G
�@U�4��Q��(�YF����)�E:�6��0��@��H)�Dr�>��3��*�E�_� w�+����j��I�1N�$����S��8�aK���+����� �5@�-v���-��)���3+�S_�S��E�M�"V�#y�(��%����*�'.�FV�4��8��7�8C�J|�6��>��D=�E��B��"�:.�6i�H��:��<$�'a�5��7��>��K6�N��>��R�=c�:��/��7�!D�)f�)��+��<��W#�{�_��-��")�)L�7v� ����&��%�=<�%z�4��5��+�I7�,��P��-��A-�o�/��'��C��E �9f�N����T
+��_�3��2�Q�Vh�=��@��5>�3t�8��#��<�3B�Bv�X��H�D[�\��[��HY�K��O��_>G�R�\91�[�S$Qx,�C�);#eV�'��&�C�T�VK��3$cX�.�/1:O:�@�@�G6"	Y	!t	�	��	\\
+5�
+4�
+>$0cN���G�9�>
CP
A�
:�
l<~��+�lD}��[�7Z*�)�-�(.>+m,�~�UE4�'�)�&"I;_B�2�42F2y7�5�*,/W(�@�D�6Sj���X�P38�$��
��GS'oG�A�!6�Q��$7�M�-5-c%� ��*�F"4iJ�6� !?-aE�1�1@9@z1�v�d0s5�"�9�I7 � %� U� =!DV!/�!�!#�!D"YS"h�"7#RN#3�#G�#/$EM$H�$2�$c%os%P�%u4&Q�&7�&Y4'@�'N�'$(%C(Gi(�(C�(+
)U9)C�)��)2Y*%�*(�*�*6�*>1+;p+<�+6�+< ,3],9�,u�,sA-'�-�-)�-Q.Zh.'�.�.	/)/1:/3l/L�/)�/	0!0&)0\P07�0	�0�01)/1Y1<m1�1�16�1(2EC2M�2Q�2E)3o3<�3�3�3H4_O4\�445>A5`�5y�5![6}6R�6P�6+87
d72r7O�7$�758`P8
�8�89�8919J91h98�9�9�9 �95:AA:<�:*�:c�:1O;T�;H�;E<,e<?�<R�<U%={=9�=L�=? >;`>r�>.?2>?2q?�?��?]5@Z�@:�@))A+SA9AW�AUBfgBd�Bm3C(�C7�CjD=mD<�D/�D9E7RET�EU�EQ5F!�F)�F?�F7GKG8fG$�G(�G)�G?H@WH4�H:�HI'IBI8\I(�I,�IB�I&.J@UJB�J8�J1KFDKM�KD�K4L:SL�LY�LM�L=MM�M#�M �M4�M- N)NN0xNM�N:�N[2OO�OD�OC#P0gP4�P<�PH
+Q%SQ*yQ�Q7�Q4�Q>+RAjR~�R=+SKiS+�SF�S-(T-VTB�T=�TMU;SU;�U7�U5V*9V&dV*�V#�V.�VD	WBNW/�WU�W0XAHX*�X+�X'�X/	Y39YmY'�Y+�YA�Y5Z9PZ �Z�ZN�ZT[:h['�[M�[.\>H\$�\'�\Q�\J&]Aq]5�] �]4
+^<?^.|^0�^4�^_1_N_�l_�W`0EaEva@�a$�a>"b1ab1�b5�b0�bG,c3tc7�ch�cWIde�de;#e;_e7�ec�e<7f;tf(�f^�f8g<>g,{g0�g.�g h)h Ihjh'h*�h�h�hM�hw>i=�i�i+j*;jJfje�jb?�i?��^��������C���IO���'��)~%8H���Y=	\�:��V)�X������+�z�X�:��G����B�<Z���%�o\"�%N�9������0����Ux�$����� =��.���p�|6v�������������y�m^��Z��_h(�����h{-le����c�������j��>?�C����E��,�y��}C&�
+��;����1p:��M0��KF0HFw�uS]��=�� ��$V.�:���L[3��n����J�/��W�X���1�n`8�I�dx5=�����	��a���Uy79�?1��
+n���[a�#)J�GT��5t=v]��mY�@�r)��q��t��BPf QER��a'��N��H�K>��\"������>�\�r+�5�L���.�<����h�6�@��|	0�N�>�+}�D�
YVosH��A*����V!w�QO#�������u���A9&������Al�U6X�3�lp����z� �D��#�Ac�l6`�&�L�~�����Cm�g#1��e���1(�Z�����D���wn�����g�.w`'�-V�t��q��2���C��g#S���A�9���J7�p^���z$�I�����E�J���2�"%�v	8�k�9�2�:�������N*�R����<���
�[�hG��j3���+�E+
+�@�4�K_c�Y{�W�@5�W4-2�f�O
�	��MG���c��d(o��&�s�TTTe�8�SxrQ?��M���3^��.;�k���_I,u'I�K��*O�L
+_���d���]�i������$��Bs!Sf���M��OutD�;(q�gb�x�m;jbE6*�7LiQ��,�/�R,�
�K�4��P������������|HB��
+q��[�yF��oPj���74/��Z@���'�/D��,��� �M��a3R��F�Fs�$���;�&!8��2�b{N�)-�Q��R�U����>�e7�~�W]!���
(�!��`/5��4����z��PJ�"��r0��<iv*�G"�k���%PU��-��STk}|{B��f�}�~d�<��
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Currently enabled options:
+ %s
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on  new Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd bytes.
+ old Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd, main archive=%jd.
+%d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not a regular file%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s subprocess failed with wait status code %d%s subprocess returned error exit status %d%s subprocess was interrupted%s subprocess was killed by signal (%s)%s%s suggests %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%.255s' is not a Debian format archive'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field present for package with inappropriate '%s' field'%s' field value '%.250s''%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version '%s''%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' is not a valid architecture name in '%s' field: %s'%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one <archname> argument--%s takes one <pkgname> argument--%s takes one <trigname> argument--%s takes one <version> argument--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Authentication is required to run update-alternativesCommands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -i|--install       <.deb file name>... | -R|--recursive <directory>...
+  --unpack           <.deb file name>... | -R|--recursive <directory>...
+  -A|--record-avail  <.deb file name>... | -R|--recursive <directory>...
+  --configure        <package>... | -a|--pending
+  --triggers-only    <package>... | -a|--pending
+  -r|--remove        <package>... | -a|--pending
+  -P|--purge         <package>... | -a|--pending
+  -V|--verify [<package>...]       Verify the integrity of package(s).
+  --get-selections [<pattern>...]  Get list of selections to stdout.
+  --set-selections                 Set package selections from stdin.
+  --clear-selections               Deselect every non-essential package.
+  --update-avail [<Packages-file>] Replace available packages info.
+  --merge-avail [<Packages-file>]  Merge with info from file.
+  --clear-avail                    Erase existing available info.
+  --forget-old-unavail             Forget uninstalled unavailable pkgs.
+  -s|--status [<package>...]       Display package status details.
+  -p|--print-avail [<package>...]  Display available version details.
+  -L|--listfiles <package>...      List files 'owned' by package(s).
+  -l|--list [<pattern>...]         List packages concisely.
+  -S|--search <pattern>...         Find package(s) owning file(s).
+  -C|--audit [<package>...]        Check for broken package(s).
+  --yet-to-unpack                  Print packages selected for installation.
+  --predep-package                 Print pre-dependencies to unpack.
+  --add-architecture <arch>        Add <arch> to the list of architectures.
+  --remove-architecture <arch>     Remove <arch> from the list of architectures.
+  --print-architecture             Print dpkg architecture.
+  --print-foreign-architectures    Print allowed foreign architectures.
+  --assert-<feature>               Assert support for the specified feature.
+  --validate-<thing> <string>      Validate a <thing>'s <string>.
+  --compare-versions <a> <op> <b>  Compare version numbers - see below.
+  --force-help                     Show help on forcing.
+  -Dh|--debug=help                 Show help on debugging.
+
+Commands:
+  -s, --status [<package>...]      Display package status details.
+  -p, --print-avail [<package>...] Display available version details.
+  -L, --listfiles <package>...     List files 'owned' by package(s).
+  -l, --list [<pattern>...]        List packages concisely.
+  -W, --show [<pattern>...]        Show information on package(s).
+  -S, --search <pattern>...        Find package(s) owning file(s).
+      --control-list <package>     Print the package control file list.
+      --control-show <package> <file>
+                                   Show the package control file.
+  -c, --control-path <package> [<file>]
+                                   Print path for package control file.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not chroot into maintainer script environmentDo not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnore a missing stat override when removing itIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Options:
+  --package <package>      name of the package whose copy of <file> will not
+                             be diverted.
+  --local                  all packages' versions are diverted.
+  --divert <divert-to>     the name used by other packages' versions.
+  --rename                 actually move the file aside (or back).
+  --no-rename              do not move the file aside (or back) (default).
+  --admindir <directory>   set the directory with the diversions file.
+  --instdir <directory>    set the root directory, but not the admin dir.
+  --root <directory>       set the directory of the root filesystem.
+  --test                   don't do anything, just demonstrate.
+  --quiet                  quiet operation, minimal output.
+  --help                   show this help message.
+  --version                show the version.
+
+Options:
+  -v, --verbose                    Enable verbose output.
+  -D, --debug                      Enable debugging output.
+      --showformat=<format>        Use alternative format for --show.
+      --deb-format=<format>        Select archive format.
+                                     Allowed values: 0.939000, 2.0 (default).
+      --nocheck                    Suppress control file check (build bad
+                                     packages).
+      --root-owner-group           Forces the owner and groups to root.
+      --[no-]uniform-compression   Use the compression params on all members.
+  -z#                              Set the compression level when building.
+  -Z<type>                         Set the compression type used when building.
+                                     Allowed types: gzip, xz, none.
+  -S<strategy>                     Set the compression strategy when building.
+                                     Allowed values: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite an existing stat override when adding itOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Run update-alternatives to modify system alternative selectionsSelecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use MAC based security if availableUse dpkg --contents (= dpkg-deb --contents) to list archive files contents.
+Use dpkg --info (= dpkg-deb --info) to examine archive files.
+Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenUseful environment variables:
+Validatable things: pkgname, archname, trigname, version.
+
+VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %salternatives ('|') not allowed in '%s' fieldambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchitecture name '%s' is invalid: %sarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' is not a regular filearchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive details '%s' field not allowed in status filearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'boolean (yes/no) '%s' field: %sbroken due to failed removal or installationbroken due to postinst failurebuilding an unknown package in '%s'.building package '%s' in '%s'.can't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot access archive '%s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get package %s filesystem last modification timecannot get security labeling handlecannot open %scannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open directory '%s'cannot open file %scannot open security status notification channelcannot read %scannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set primary group ID to rootcannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot stat pathname '%s'cannot write file %s into the pagercannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile file contains an empty lineconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file '%s' for package '%s' is missing valuecontrol file '%s' for package '%s' is missing value separatorcontrol file contains %ccontrol membercorrupt info database format file '%s'corrupted filesystem tarfile in package archivecould not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdeprecated --%s option; use --%s insteaddiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+diverting file '%s' from an Essential package with rename is dangerous, use --no-renamedone
+downgrading %.250s from %.250s to %.250sdpkg database lockdpkg frontend lockdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty archive details '%s' fieldempty field nameempty string from fgets reading conffilesempty trigger names are not permittedempty value for '%s' fieldend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is emptyepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while cleaning uperror while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not a Debian binary archive (try dpkg-split?)file '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedfirst (want) word in '%s' field: %sforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentformat version with too big major componentformat version with too big minor componentfound unknown packages; this might mean the available database
+is outdated, and needs to be updated through a frontend method;
+please see the FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>generated corrupt ar header for '%s'group '%s' does not existhas invalid value '%.50s'has trailing junkheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalled %s package %s scriptinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal errorinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid package name in '%s' field: %sinvalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid tar header checksuminvalid tar header checksum fieldinvalid tar header gid fieldinvalid tar header mtime fieldinvalid tar header size fieldinvalid tar header uid fieldinvalid tar header with empty name fieldinvalid trigger name '%.250s': %.250sis missing a valueline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slaveloading control file '%s' for package '%s'loading files list file for package '%s'local diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing '%s' fieldmissing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnew %s package %s scriptnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no 'control' file in control archive!no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot enough privileges to change root directory with --force-not-root, consider using --force-script-chrootless?not installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '%s' field usedobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete compression type '%s'; use xz insteadobsolete compression type '%s'; use xz or gzip insteadobsolete force/refuse option '%s'obsolete option '--%s'old %s package %s scriptold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoutside error context, abortingoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s (%s) with field '%s: %s' is not co-installable with %s which has multiple installed instancespackage %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package architecture is missing or emptypackage contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has '%s' field but is architecture '%s'package has '%s' field but is missing architecturepackage has status %s and has conffiles, forgetting thempackage has status %s but no triggers awaitedpackage has status %s but no triggers pendingpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name '%s' is invalid: %spackage name has characters that aren't lowercase alphanums or '-+.'package not in status nor available database at line %d: %.250spackage signature verificationpackage version numberpager to show filepart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)partially read tar headerpassed
+pastepath may not contain newlinesplease specify --no-rename explicitly, the default will change to --rename in 1.20.xpre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %squadstate (foreign/allowed/same/no) '%s' field: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerequired read/write access to the dpkg database directory %srequired write access to dpkg database directory '%s' for bulk available updaterevision number is emptyrm command for cleanuproot or empty directory listed as a conffile in '%s' fieldsearched, but found no packages (files matching *.deb)second (error) word in '%s' field: %ssection<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesshowing package list on pagerskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filesyntax error in triggers deferred file '%.250s' at line %d character %zd '%s'takes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthird (status) word in '%s' field: %sthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too few values in archive details '%s' field (compared to others)too many errors, stoppingtoo many nested errors during error recoverytoo many values in archive details '%s' field (compared to others)too-long line or missing newline in '%.250s'treewalk root %s is not a directorytrigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name '%s' is invalid: %strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers database locktriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to access dpkg database directory '%s' for bulk available updateunable to access the dpkg database directory %sunable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to check lock file for dpkg database directory %sunable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create dpkg database lock file for directory %sunable to open/create dpkg frontend lock for directory %sunable to open/create new triggers deferred file '%.250s'unable to open/create triggers lock file '%.250s'unable to parse timestamp '%.255s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunexpected pre-existing pathname %sunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown system group '%s' in statoverride file; the system group got removed
+before the override, which is most probably a packaging bug, to recover you
+can remove the override manually with %sunknown system user '%s' in statoverride file; the system user got removed
+before the override, which is most probably a packaging bug, to recover you
+can remove the override manually with %sunknown tar header type '%c'unknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunrecoverable fatal error, abortingunsupported GNU tar header type '%c'unsupported PAX tar header type '%c'unsupported Solaris tar header type '%c'unsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has line starting with non-space '%c'value for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion '%s' has bad syntax: %sversion number does not start with digitversion number is emptyversion string has embedded spacesversion string is emptyversioned Provideswait for %s subprocess failedwait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingword in '%s' field: %syes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou do not have permission to lock the dpkg database directory %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.19.7
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2019-05-09 05:38+0200
+Last-Translator: Guillem Jover <guillem@debian.org>
+Language-Team: Catalan <debian-l10n-catalan@lists.debian.org>
+Language: ca
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=n!=1;
+
+activadors pendents de paquets que són o poden ser irresolubles:
+
+El conffile «%s» no existeix en el sistema.
+S'està instal·lant el conffile nou tal i com heu demanat.
+
+Opcions habilitades actualment:
+ %s
+
+Les opcions de depuració es barregen fent l'OR bit a bit.
+Tingueu en compte que els significats i els valors estan subjectes a canvis.
+
+Empreu «dpkg» per a instal·lar i desinstal·lar paquets del vostre sistema, o
+«apt» o «aptitude» per a gestionar els paquets d'una manera amigable.
+Els paquets desempaquetats emprant «dpkg-deb --extract» estaran instal·lats
+incorrectament!
+
+AVÍS - forçar l'ús de les opcions marcades amb [!] poden malmetre
+seriosament la instal·lació. Les opcions de forçat marcades amb [*] estan
+activades per defecte.
+     No modificat des de la instal·lació.
+     La versió del paquet és la mateixa que la de l'última instal·lació.
+     no és un fitxer normal    %.255s
+   Què voleu fer al respecte? Les vostres opcions són:
+    Y o I  : instal·la la versió del paquet
+    N o O  : conserva la versió actualment instal·lada
+      D    : mostra les diferències entre versions
+      Z    : executa un intèrpret d'ordres per a examinar la situació
+  %.250s (versió %.250s) és present i %s.
+  %.250s (versió %.250s) serà instal·lat.
+  %.250s és %s.
+  %.250s està instal·lat, però té una versió %.250s.
+  %.250s no està instal·lat.
+  %.250s serà desconfigurat.
+   %.250s serà instal·lat, però té una versió %.250s.
+  %.250s serà desinstal·lat.
+  %.250s està desempaquetat, però no ha estat configurat.
+  %.250s està desempaquetat, però té una versió %.250s.
+  la darrera versió configurada de %.250s és la %.250s.
+  %.250s proveeix %.250s i és present i %s.
+  %.250s proveeix %.250s y serà instal·lat.
+  %.250s proveeix %.250s però és %s.
+  %.250s proveeix %.250s però serà desconfigurat.
+  %.250s proveeix %.250s però serà desinstal·lat.
+  %s (%s) proveeix %s.
+  -?, --help                       Mostra aquest missatge d'ajuda.
+      --version                    Mostra la versió.
+
+  El paquet %s està esperant el processat dels activadors.
+  El paquet %s encara no està configurat.
+  El paquet %s no està instal·lat.
+  El paquet %s serà desinstal·lat.
+  El paquet %s que proveeix %s està esperant el processat dels activadors.
+  El paquet %s que proveeix %s no està configurat.
+  El paquet %s que proveeix %s no està instal·lat.
+  El paquet %s que proveeix %s serà desinstal·lat.
+  La versió del paquet «%s» al sistema és %s.
+  La versió del paquet «%s» al sistema, proveïda per «%s», és %s.
+  La versió del paquet %s que es configurarà és %s.
+  l'enllaç %.250s és %s  la millor versió de l'enllaç és «%s»  la millor versió de l'enllaç no està disponible  l'enllaç està actualment absent  l'enllaç apunta actualment cap a %s  l'esclau %s és %s  esclau %s: %s %7jd octets, %5d línies %c  %-20.127s %.127s
+ %d en %s:  %d paquet, de la seccion següent: %d paquets, de les seccions següents: %s (%jd octets)
+ %s (%s) trenca %s i és %s.
+ %s (no és un fitxer normal)
+ ==> Eliminat (per vosaltres o per algun guió) des de la instal·lació.
+ ==> Fitxer en el sistema creat per vosaltres o per algun guió.
+ ==> Fitxer també en el paquet proveït pel mantenidor.
+ ==> Es manté el fitxer de configuració antic per defecte.
+ ==> Modificat (per vosaltres o per algun guió) des de la instal·lació.
+ ==> El distribuïdor del paquet ha publicat una versió actualitzada.
+ ==> S'emprarà el fitxer antic tal i com heu demanat.
+ ==> S'emprarà el fitxer de configuració nou per defecte.
+ ==> S'emprarà el fitxer nou tal i com heu demanat.
+ Paquet %s: part(s)  L'acció per defecte és instal·lar la versió nova.
+ L'acció per defecte és conservar la versió actual.
+ i  depèn de  paquet de Debian nou, versió %d.%d.
+ mida %jd octets: arxiu de control=%jd octets.
+ paquet Debian antic, versió %d.%d.
+ mida %jd octets: arxiu de control=%jd, arxiu principal=%jd.
+no s'ha trobat %d programa esperat al PATH, o no és executable
+%sno s'han trobat %d programes esperats al PATH, o no són executables
+%shi ha %d fitxer o directori instal·lat actualment.)
+hi ha %d fitxers i directoris instal·lats actualment.)
+Manca el component de control requerit %dManquen els components de control requerits %d%s (subprocés): %s
+%s - prioritat %d%s trenca %s%s entra en conflicte amb %s%s està corromput: %sOpció de depuració %s, --debug=<octal> o -D<octal>:
+
+ Número  Ref. al font     Descripció
+%s depèn de %s%s millora %sLes opcions de forçat de %s - controlen el comportament quan hi ha problemes:
+  avisa però continua:      --force-<cosa>,<cosa>,…
+  atura't amb error:        --refuse-<cosa>,<cosa>,… | --no-force-<cosa>,…
+ Forçat de coses:
+«%s» no és un fitxer regular%s no està correctament instal·lat; no es tindrà en compte cap dependència d'aquest%s predepèn de %s%s recomana %sel subprocés «%s» ha fallat amb codi d'estat en espera %del subprocés «%s» retornà el codi d'eixida d'error %del subprocés «%s» ha estat interromputel subprocés «%s» ha estat finalitzat pel senyal (%s)%s%s suggereix %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Versió del format de la part:   %d.%d
+    Part del paquet:                %s
+           … versió:                %s
+           … arquitectura:          %s
+           … resum MD5:             %s
+           … mida:                  %jd octets
+           … trossejat cada:        %jd octets
+    Número de la part:              %d/%d
+    Mida de la part:                %jd octets
+    Desplaçament de la part:        %jd octets
+    Mida del fitxer de la part
+        (porció usada):             %jd octets
+
+%s: el conffile «%.250s» no és un fitxer normal o un enllaç simbòlic (= «%s»)%s: el conffile «%.250s» apunta a un nom de fitxer corromput
+ («%s» és un enllaç simbòlic a «%s»)%s: el fitxer de configuració «%s» és un enllaç circular
+ (= «%s»)%s: problemes de dependències, però es configurarà igualment tal i com heu demanat:
+%s%s: problemes de dependències, però s'estan processant els activadors
+    igualment tal i com heu demanat:
+%s%s: problemes de dependències, però es desinstal·larà igualment tal i com heu demanat:
+%s%s: s'ha produït un error al vincular l'entrada al flux bzip2%s: s'ha produït un error al vincular l'entrada al flux gzip%s: s'ha produït un error al vincular l'eixida al flux bzip2%s: s'ha produït un error al vincular l'eixida al flux gzip%s: no s'ha pogut enllaçar «%.250s» a «%.250s»: %s%s: no s'ha pogut esborrar «%.250s» (abans de sobreescriure): %s%s: no s'ha pogut esborrar «%s»: %s%s: no s'ha pogut esborrar l'antiga còpia de seguretat «%.250s»: %s%s: no s'ha pogut esborrar la versió de l'antiga distribució «%.250s»: %s%s: no s'ha pogut canviar el nom de «%.250s» a «%.250s»: %s%s: s'ha produït un error de lectura intern de bzip2%s: s'ha produït un error de lectura intern de bzip2: «%s»%s: s'ha produït un error d'escriptura intern de bzip2%s: s'ha produït un error d'escriptura intern de bzip2: «%s»%s: s'ha produït un error de lectura intern de gzip%s: s'ha produït un error de lectura intern de gzip: «%s»%s: s'ha produït un error d'escriptura intern de gzip%s: s'ha produït un error d'escriptura intern de gzip: «%s»%s: s'ha produït un error d'escriptura intern de gzip: «%s»%s: s'ha produït un error en tancar lzma%s: s'ha produït un error en lzma: %s%s: s'ha produït un error de lectura de lzma%s: s'ha produït un error d'escriptura de lzma%s: s'ha produït un error en la copia de pas a través: %s%s: no es pot obrir %s per calcular el resum: %s%s: no es pot llegir el valor de l'enllaç simbòlic del conffile «%s»
+ (= «%s»): %s%s: no es pot fer «stat» al fitxer de configuració «%s»
+ (= «%s»): %s«%.255s» no conté cap component de control «%.255s»«%.255s» no és un arxiu amb el format Debian«%s» té un conflicte amb «%s»«%s» conté un valor Priority «%s» definit per l'usuaril'opció «%s» no porta paràmetresel camp «%s» es present per a un paquet amb un camp «%s» no apropiatvalor «%2$.250s» del camp «%1$s»en el camp «%s», el nom de paquet no és vàlid «%.255s»: %sen el camp «%s», manca un nom d'arquitectura, o s'ha trobat brutícia on s'esperava un nom d'arquitecturaen el camp «%s», manca un nom de paquet, o s'ha trobat brutícia on s'esperava un nom de paqueten el camp «%s», que fa referència a «%.255s»:
+ «%c» és obsolet, empreu «%c=» o «%c%c»en el camp «%s», que fa referència a «%.255s»:
+ la relació de versió %c%c és erròniaen el camp «%s», que fa referència a «%.255s»:
+ coincidència implícita en el número exacte de versió, se suggereix emprar «=»en el camp «%s», que fa referència a «%.255s»:
+ el valor de versió comença amb un caràcter no alfanumèric, se suggereix afegir un espaien el camp «%s», que fa referència a «%.255s»: el nom d'arquitectura «%.255s» no és vàlid: %sen el camp «%s», que fa referència a «%.255s»: versió «%s»en el camp «%s», que fa referència a «%.255s»: versió no terminadaen el camp «%s», error de sintaxi després de la referència al paquet «%.255s»«%s» no és un nom valid d'arquitectura en el camp «%s»: %sl'opció «%s» necessita un paràmetreno s'ha trobat «%s» en el PATH o no és executable(Noteu la desaparició de %s, que ha estat completament reemplaçat.)
+(S'està llegint la base de dades… (no hi ha cap descripció disponible)(total %jd octets)
+, s'ha generat un fitxer «core»l'opció -%c no porta paràmetresl'opció -%c té un paràmetre--%s --pending no pren cap argument que no sigui una opció--%s --recursive necessita almenys un camí com a argument--%s no suporta (encara) la lectura del .deb des de l'entrada estàndard--%s necessita un nom de fitxer .deb i un directori com a arguments--%s necessita <nom>--%s necessita <nom> <camí>--%s necessita un nom de fitxer .deb com a argument--%s necessita un <directori> com a paràmetre--%s necessita un argument <fitxer>--%s necessita un sol paràmetre--%s necessita un directori de destí.
+Potser voleu fer dpkg --install?--%s necessita un nom de paquet vàlid, però «%.250s» no ho és: %s--%s necessita almenys un paquet arxiu com a argument--%s almenys necessita un nom de paquet com a argument--%s necessita quatre argumentsl'opció --%s no porta paràmetresl'opció --%s té un paràmetre--%s requereix d'un número octal positiu com a paràmetre--%s requereix un o més fitxers part com a arguments--%s accepta com a molt un fitxer Packages com a argument--%s accepta com a molt dos arguments--%s pren com a molt dos arguments (.deb i directori)--%s accepta exactament un argument--%s accepta exactament dos arguments--%s no accepta cap argument--%s necessita un <nom-d'arquitecture> com a argument--%s necessita un <nom-de-paquet> com a argument--%s necessita un <nom-d'activador> com a argument--%s necessita una <versió> com a argument--%s necessita un nom de paquet com a argument--%s només pren un argument (fitxer .deb)S'ha emprat --%s amb l'operador de relació obsolet «%s»--auto requereix exactament un fitxer part com a argument--auto requereix l'ús de l'opció --outputrelació dolenta de --compare-versions--compare-versions pren tres arguments: <versió> <relació> <versió>--search almenys necessita un nom de fitxer pare com argument--split necessita un nom de fitxer font com a argument--split pren com molt un nom de fitxer font i un prefix de destís'ha donat --update però %s no existeixno té sentit utilitzar --update amb --remove… sembla que ha anat bé…/%s; tot i així:
+<compressió> des de tar -cf<deb> és el nom de fitxer d'un arxiu en format Debian.
+<fitxerc> és el nom d'un component d'un fitxer administratiu.
+<campc> és el nom d'un camp en el fitxer de «control» principal.
+
+<descompressió><dpkg-deb --info canonada><enllaç> i <camí> no poden ser el mateix<enllaç> és un enllaç simbòlic que apunta a %s/<nom>.
+  (p.ex. /usr/bin/pager)
+<nom> és el nom mestre del grup d'enllaços.
+  (p.ex. pager)
+<camí> és la ubicació de un dels fitxers objectiu de les alternatives.
+  (p.ex. /usr/bin/less)
+<prioritat> és un enter; les opcions amb un valor més gran tenen major
+  prioritat al mode automàtic.
+
+<estat del paquet i descriptor de fitxer de progrés><error estàndard><entrada estàndard><eixida estàndard>S'està afegint «%s»
+Permet la instal·lació de paquets en conflicteNo s'ha canviat l'alternativa %s perquè la selecció %s no és disponible.Instal·la sempre els conffiles que faltenUtilitza sempre els conffiles nous, sense preguntarUtilitza sempre els conffiles antics, sense preguntarUn altre procés ha blocat l'escriptura de la base de dades, i possiblement
+estiga modificant-la, alguns dels problemes següents podrien estar relacionats
+amb això.
+ArquitecturaS'està autenticant %s…
+Es requereix autenticació per a executar update-alternativesOrdres:
+  --add <propietari> <grup> <mode> <camí>
+                           afegeix una nova entrada per a <camí> a la base
+                             de dades.
+  --remove <camí>          esborra <camí> de la base de dades.
+  --list [<patró-glob>]    llista de les substitucions actuals a la base de
+                             dades.
+
+Ordres:
+  --check-supported                Comprova si el dpkg en execució implementa activadors.
+
+Ordres:
+  --install <enllaç> <nom> <camí> <prioritat>
+    [--slave <enllaç> <nom> <camí>]…
+                           afegeix un grup d'alternatives al sistema.
+  --remove <nom> <camí>    suprimeix <camí> del grup d'alternatives <nom>.
+  --remove-all <nom>       suprimeix del sistema el grup d'alternatives <nom>.
+  --auto <nom>             canvia l'enllaç mestre <nom> a mode automàtic.
+  --display <nom>          mostra informació sobre el grup <nom>.
+  --query <nom>            versió analitzable per màquina de --display <nom>.
+  --list <nom>             mostra tots els objectius del grup <nom>.
+  --get-selections         llista els noms de les alternatives mestres i
+                             els seus estats.
+  --set-selections         llegeix l'estat de les alternatives de l'entrada
+                             estàndard.
+  --config <nom>           mostra les alternatives per al grup <nom> i
+                           pregunta a l'usuari quina prefereix utilitzar.
+  --set <nom> <camí>       defineix <camí> com a alternativa per a <nom>.
+  --all                    crida --config sobre totes les alternatives.
+
+Ordres:
+  -i|--install       <fitxer .deb>… | -R|--recursive <directori>…
+  --unpack           <fitxer .deb>… | -R|--recursive <directori>…
+  -A|--record-avail  <fitxer .deb>… | -R|--recursive <directori>…
+  --configure             <paquet>… | -a|--pending
+  -r|--remove             <paquet>… | -a|--pending
+  -P|--purge              <paquet>… | -a|--pending
+  -V|--verify [<paquet>…]          Verifica la integritat dels paquets.
+  --get-selections [<patró>…]      Aconsegueix la llista de seleccions en
+                                     l'eixida estàndard.
+  --set-selections                 Estableix seleccions de paquets des de
+                                     l'entrada estàndard.
+  --clear-selections               Desselecciona tots els paquets no
+                                     essencials.
+  --update-avail [<fitxer-Packages>]
+                                   Reemplaça la informació de paquets
+                                     disponibles.
+  --merge-avail [<fitxer-Packages>]
+                                   Fusiona amb la informació del fitxer.
+  --clear-avail                    Suprimeix la informació actual sobre els
+                                     paquets disponibles.
+  --forget-old-unavail             Oblida la informació sobre paquets no
+                                     instal·lats i no disponibles.
+  -s|--status [<paquet>…]          Mostra detalls sobre l'estat del paquet.
+  -p|--print-avail [<paquet>…]     Mostra detalls sobre la versió disponible.
+  -L|--listfiles <paquet>…         Llista els fitxers que pertanyen als
+                                     paquets.
+  -l|--list [<patró>…]             Llista breument els paquets.
+  -S|--search <patró>…             Cerca els paquets que contenen aquests
+                                     fitxers.
+  -C|--audit [<paquet>…]           Verifica els paquets trencats.
+  --yet-to-unpack                  Mostra els paquets seleccionats per
+                                     instal·lació.
+  --predep-package                 Mostra les predependències a desempaquetar.
+  --add-architecture <arq>         Afegeix <arq> a la llista d'arquitectures.
+  --remove-architecture <arq>      Esborra <arq> de la llista d'arquitectures.
+  --print-architecture             Mostra l'arquitectura de dpkg.
+  --print-foreign-architectures    Mostra les arquitectures estrangeres permeses.
+  --assert-<característica>        Afirma el suport per la <característica>.
+  --validate-<cosa> <text>         Valida el <text> de la <cosa>.
+  --compare-versions <a> <op> <b>  Compara els números de versió - mireu
+                                     més endavant.
+  --force-help                     Mostra l'ajuda sobre forçar.
+  -Dh|--debug=help                 Mostra l'ajuda sobre la depuració.
+
+Ordres:
+  -s|--status [<paquet>…]        Mostra detalls de l'estat del paquet.
+  -p|--print-avail [<paquet>…]   Mostra detalls de la versió disponible.
+  -L|--listfiles <paquet>…       Llista els fitxers que pertanyen als
+                                   paquets.
+  -l|--list [<patró>…]           Llista els paquets sense massa detalls.
+  -W|--show [<patró>…]           Mostra informació sobre els paquets.
+  -S|--search <patró>…           Cerca els paquets als que pertanyen
+                                   els fitxers.
+     --control-list <paquet>     Mostra la llista de fitxers de control del
+                                   paquet.
+     --control-show <paquet> <fitxer>
+                                 Mostra el fitxer de control del paquet.
+  -c|--control-path <paquet> [<fitxer>]
+                                 Mostra el camí per al fitxer de control
+                                   del paquet.
+
+Ordres:
+  -s|--split <fitxer> [<prefix>]   Separa un arxiu en parts.
+  -j|--join <part> <part>…         Uneix parts.
+  -I|--info <part>…                Mostra informació sobre una part.
+  -a|--auto -o <completa> <part>   Acumula les parts automàticament.
+  -l|--listq                       Llista els bocins desaparellats.
+  -d|--discard [<fitxer>…]         Descarta els bocins desaparellats.
+
+Ordres:
+  [--add] <fitxer>         afegeix una desviació.
+  --remove <fitxer>        elimina una desviació.
+  --list [<patró-glob>]    mostra les desviacions de fitxers.
+  --listpackage <fitxer>   mostra quin paquet desvia el fitxer.
+  --truename <fitxer>      retorna el fitxer desviat.
+Els operadors de comparació per a --compare-versions són:
+  lt le eq ne ge gt       (tracta la versió en blanc com anterior a qualsevol
+                          altra versió);
+  lt-nl le-nl ge-nl gt-nl (tracta la versió en blanc com posterior a qualsevol
+                          altra versió);
+  < << <= = >= >> >       (només per motius de compatibilitat amb la sintaxi
+                          del fitxer de control).
+
+Fitxer de configuració «%s»
+Fitxer de configuració «%s» (realment «%s»)
+Configura qualsevol paquet que pugui ajudar a aquestS'està desconfigurant %s (%s)…
+S'està desconfigurant %s (%s), per a permetre la desinstal·lació de %s (%s)…
+Eina de consulta del programa de gestió de paquets «%s» de Debian versió %s.
+Utilitat de consulta d'activadors %s de Debian versió %s.
+Debian %s versió %s.
+Rerefons d'arxius de paquets «%s» de Debian versió %s.
+Programa de gestió de paquets «%s» de Debian versió %s.
+Eina de divisió/unió «%s» de Debian; versió %s.
+S'ha eliminat %s.
+Dependències i conflictesDescripcióDesitjat=desconegUt/Instal·la/supRimeix/Purga/retín(H)
+| Estat=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Estat,Err: majúsc.=dolent)
+No canvia el directori arrel en l'entorn del guió de mantenidorNo realitza operacions d'E/S segures al desempaquetarS'han trobat errors en processar:
+Estat d'eixida:
+  0 = correcte;
+  1 = amb --auto, el fitxer no és una part
+  2 = problemes
+El fitxer «%.250s» no és part d'un arxiu multipart.
+Format de la sintaxi:
+  Un format és una cadena que es mostrarà per a cada paquet. El format
+  pot incloure les seqüències d'escapada estàndard \n (línia nova),
+  \r (retorn de carro) o \\ (barra invertida). Es pot incloure informació
+  sobre el paquet inserint referències variables als camps dels paquets
+  utilitzant la sintaxi ${var[;amplada]}. Els camps s'alinearan a la
+  dreta a menys que l'amplada siga negativa, en aquest cas s'utilitzarà
+  alineació a l'esquerra. 
+Informació de progrés generalment útilIgnora un statoverride que manga al eliminar-loS'està ignorant la petició d'esborrar la desviació compartida «%s».
+S'està ignorant la petició de canviar el nom del fitxer «%s» que pertany al paquet «%s» que desvia
+S'ha actualitzat la informació sobre %d paquet
+S'ha actualitzat la informació sobre %d paquets.
+Quantitats ingents de detallInstal·la un paquet fins i tot si falla la comprovacióInstal·la fins i tot si hagués de trencar un altre paquetS'està instal·lant una versió nova del fitxer de configuració %s…
+Invocació i estat dels guions del mantenidorQueden fitxers de brutícia al directori de dipòsit:
+S'està deixant «%s»
+Molta eixida sobre dependències i conflictesMolts detalls sobre p. ex. el directori dpkg/infoMolta eixida per cada conffileMolta eixida per cada fitxer processatMolta eixida sobre activadorsfinal del fitxer d'MSDOS (^Z) dins del nom del camp «%.*s»final del fitxer d'MSDOS (^Z) dins del valor del camp «%.*s» (manca una línia nova?)S'ha desempaquetat més d'una còpia del paquet %s!
+ Només es configurarà una vegada.
+NomNo hi ha cap desviació «%s», no s'ha suprimit.
+Nota: el PATH del root normalment ha de contenir /usr/local/sbin, /usr/sbin i /sbinNo hi ha res a configurar.Ofereix reemplaçar els fitxer de configuració per cap versió novaOpcions:
+  --admindir=<directori>          Empra <directori> en lloc de %s.
+  --by-package=<paquet>           Descarta l'espera de l'activador
+                                  (normalment establerta pel dpkg).
+  --await                         El paquet necessita esperar el processat.
+  --no-await                      Cap paquet necessita esperar el processat.
+  --no-act                        Només comprova, no canvies res.
+
+Opcions:
+  --depotdir <directori>           Empra <directori> en comptes de %s/%s.
+  -S|--partsize <mida>             En KiB, per a -s (per defecte és 450).
+  -o|--output <fitxer>             Per a -j (per defecte és
+                                     <paquet>_<versió>_<arquitectura>.deb)
+  -Q|--npquiet                     Sigues silenciós quan -a no és una part.
+  --msdos                          Genera noms de fitxer en format 8.3.
+
+Opcions:
+  --package <paquet>       nom del paquet que no desviarà la seva còpia de
+                           <fitxer>.
+  --local                  desvia totes les versions del paquet.
+  --divert <desviació>     nom utilitzat per altres versions dels paquets.
+  --rename                 mou el fitxer a un costat (o el torna enrere)
+  --no-rename              no mou el fitxer a un costat (o el torna enrere)
+                             (predeterminat)
+  --admindir <directori>   estableix el directori amb les desviacions.
+  --instdir <directori>    estableix el directori arrel, però no el directori
+                             administratiu.
+  --root <directori>       estableix el directori arrel del sistema de fixters.
+  --test                   no facis res, només demostra.
+  --quiet                  opera silenciosament, amb l'eixida mínima.
+  --help                   mostra aquest missatge d'ajuda
+  --version                mostra la versió.
+
+Opcions:
+  -v, --verbose              Habilita l'eixida detallada.
+  -D, --debug                Habilita l'eixida de depuració.
+      --showformat=<format>  Empra un format alternatiu per a --show.
+      --deb-format=<format>  Selecciona el format d'arxiu.
+                               Valors permesos: 0.939000, 2.0 (predeterminat).
+      --nocheck              Suprimeix la comprovació del fitxer de control
+                               (construeix un paquet erroni).
+      --root-owner-group     Força el propietari i el grup a «root».
+      --[no-]uniform-compression
+                             Empra els paràmetres de compressió en tots els
+                               elements.
+  -z#                        Estableix el nivell de compressió.
+  -Z<tipus>                  Estableix el tipus de compressió.
+                               Tipus permesos: gzip, xz, none.
+  -S<estratègia>             Estableix l'estratègia de compressió.
+                               Valors permesos: none; extreme (xz);
+                               filtered, huffman, rle, fixed (gzip).
+
+Eixida per cada conffileEixida per cada fitxer processatSobreescriu un fitxer desviat amb una versió no desviadaSobreescriu un fitxer d'un paquet amb un altreSobreescriu un statoverride existent al afegir-loSobreescriu el directori d'un paquet amb el fitxerFalten programes importants al PATH, poden haver-hi problemesPATH no està establertEl paquet %s està en mantindre, no es toca. Empreu --force-hold per a forçar-ho.
+Paquet %s llistat més d'una vegada, només es processarà una.
+El paquet «%s» no conté cap fitxer (!)
+Paquets encara sense reensamblar:
+Part %d del paquet %s arxivada (encara es necessita Camícamp Pre-DependsS'està preparant per a desempaquetar %s…
+Premeu retorn per a mantenir l'opció per defecte[*], o introduïu un número de selecció: PrioritatProcessa fins i tot els paquets amb arquitectura erròniaProcessa fins i tot els paquets amb versions erròniesS'estan processant els activadors per a %s (%s)…
+Procés aturat per haver-hi massa errors.
+S'estan purgant els fitxers de configuració de %s (%s)…
+S'està assemblant el paquet %s amb %d part: S'està assemblant el paquet %s amb %d parts: S'ha registrat la informació sobre %s a partir de %s.
+Desinstal·la un paquet essencialDesinstal·la els paquets que precisen instal·lacióS'està desinstal·lant %s (%s)…
+S'està suprimint «%s»
+Reemplaça un paquet amb una versió menorReemplaçat pels fitxers al paquet instal·lat %s (%s)…
+S'està reemplaçant la informació de paquets disponibles, emprant %s.
+S'està reemplaçant fitxers del paquet antic %s (%s)…
+Executa update-alternatives per a modificar les seleccions d'alternatives del sistemaS'està seleccionant el paquet %s prèviament no seleccionat.
+SeleccióActiva totes les opcions de forçatS'està configurant %s (%s)…
+Quantitat absurda d'eixida sobre activadorsS'omet la línia invàlida: %sS'omet l'alternativa desconeguda %s.S'està ometent el paquet no seleccionat %s.
+S'està trossejant el paquet %s en %d part: S'està trossejant el paquet %s en %d parts: EstatEls paquets següents estan esperant el processat dels activadors que han
+estat activats per altres paquets. Aquest processat es pot demanar
+emprant dselect o dpkg --configure --pending (o dpkg --triggers-only):
+Els paquets següents estan desgavellats a causa de seriosos problemes
+durant la instal·lació. Hauran de ser reinstal·lats per a que aquests
+(i els paquets que en depenguen) funcionen correctament:
+Als paquets següents els manca el fitxer de control «list» en la base de
+dades, s'han de reinstal·lar:
+Als paquets següents els manca el fitxer de control «md5sums» en la base de
+dades, s'han de reinstal·lar:
+Els paquets següents només estan configurats a mitges, probablement
+a causa de problemes en la configuració inicial. S'ha de reintentar
+la configuració amb dpkg --configure <paquet> o l'opció configurar
+en el menú de dselect:
+Els paquets següents només estan instal·lats a mitges, a causa de problemes
+durant la instal·lació. La instal·lació probablement es puga completar
+reintentant; els paquets es poden desinstal·lar amb dselect o
+dpkg --remove:
+Els paquets següents no tenen arquitectura:
+Els paquets següents tenen una arquitectura il·legal:
+Els paquets següents tenen una arquitectura estrangera desconeguda, que causarà
+problemes de dependències en els frontals. Això és pot esmenar registrant
+l'arquitectura estrangera amb «dpkg --add-architecture»:
+S'han activat els següents paquets, però encara no s'ha dut a terme
+el processat dels activadors. Aquest processat es pot demanar emprant
+dselect o dpkg --configure --pending (o dpkg --triggers-only):
+Els paquets següents han estat desempaquetats però encara no estan
+configurats. S'han de configurar emprant dpkg --configure o l'opció
+«configure» en dselect perquè funcionen:
+Hi ha %d possibilitat per a l'alternativa %s (que proveeix %s).Hi ha %d possibilitats per a l'alternativa %s (que proveeix %s).No hi ha cap programa que proveeixi %s.Només hi ha una alternativa al grup d'enllaços %s (que proveeix %s): %sAixò és programari lliure, vegeu la Llicència Pública General GNU versió 2
+o posterior per a les condicions de còpia. No hi ha CAP garantia.
+Activació i processat dels activadorsIntenta (des)instal·lar coses fins i tot sense ser rootConverteix en avisos tots els problemes de dependènciesConverteix en avisos els problemes de dependència de versióEscriviu «exit» quan acabeu.
+Escriviu dpkg --help per obtenir ajuda sobre la instal·lació i desinstal·lació de paquets [*];
+Empreu «apt» o «aptitude» per a gestionar els paquets d'una manera més amigable;
+Escriviu dpkg -Dhelp per a obtenir una llista dels valors dels senyaladors de depuració de dpkg;
+Escriviu dpkg --force-help per a obtenir una llista d'opcions per a forçar;
+Escriviu dpkg-deb --help per a obtenir ajuda sobre la manipulació de fitxers .deb;
+
+Les opcions marcades amb ([*]) produeixen una eixida estesa - canalitzeu-la a través de «less» o «more»!Escriviu dpkg-deb --help per a obtindre ajuda a sobre de la manipulació de fitxers *.deb;
+Escriviu dpkg --help per a obtindre ajuda a sobre de com instal·lar i desinstal·lar paquets.Executeu dpkg-split --help per a obtenir-ne ajuda.Executeu dpkg-trigger --help per a obtenir-ne ajuda sobre aquesta utilitat.S'està desempaquetant %s (%s)…
+S'està desempaquetant %s (%s) sobre (%s)…
+S'està actualitzant la informació de paquets disponibles, emprant %s.
+Forma d'ús: %s [<opció>…] <ordre>
+
+Empreu «%s --help» per a obtenir informació d'ús del programa.Empreu «apt» o «aptitude» si voleu un programa de gestió de paquets més amigable.
+Empreu --help per a obtenir ajuda sobre la desviació de fitxers.Empreu --help per a obtenir ajuda sobre la substitució de la informació d'estat de fitxer.Empreu --help per a obtenir ajuda sobre la consulta de paquets.Empra seguretat basada en MAC si està disponibleEmpreu dpkg --contents (= dpkg-deb --contents) per a llistar el contingut d'arxiu.
+Empreu dpkg --info (= dpkg-deb --info) per a examinar els fitxers d'arxiu.
+Empreu dpkg amb -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+en arxius (vegeu %s --help).
+
+Utilitza l'opció predeterminada pels conffiles nous
+si estan disponibles, sense preguntar. Si no en troba
+cap de predeterminat preguntarà, a menys que també
+li doneu alguna de les opcions confold o confnewVariables d'entorn útils:
+Coses validables: pkgname, archname, trigname, version.
+
+VersióNo s'ha configurat una versió de dpkg que admeta %s.
+ Empreu «dpkg --configure dpkg» i intenteu-ho novament.
+En afegir, les opcions per defecte són --local i --divert <original>.distrib.
+En suprimir, --package o --local i --divert han de coincidir en cas
+d'especificar-se.
+Els guions de preinst/postrm sempre haurien d'especificar --package i --divert.
+Desinstal·laria o purgaria %s (%s)…
+[per defecte=N][per defecte=Y][no hi ha opció per defecte]per al bon funcionament de dpkg, l'admindir ha d'estar dins d'instdirtambé configura «%s» (requerit per «%s»)l'alternativa %s (part del grup d'enllaços %s) no existeix; s'està suprimint de la llista d'alternativesl'alternativa %s no pot ser mestra: és una esclava de %sl'alternativa %s no pot ser esclava de %s: és una alternativa mestral'alternativa %s no pot ser esclava de %s: és una esclava de %sl'alternativa %s per a %s no està registrada; no es suprimeixl'alternativa %s per a %s no està registrada; no s'estableixl'enllaç d'alternativa %s ja està gestionat per %sl'enllaç d'alternativa %s ja està gestionat per %s (esclava de %s)l'enllaç d'alternativa no és absolut com ho hauria de ser: %sel nom de l'alternativa (%s) no pot contenir ‘/’ o espaisel camí de l'alternativa no és absolut com ho hauria de ser: %sno s'admeten alternatives («|») en el camp «%s»amb més d'una instància instal·lada el nom del paquet «%s» és ambiguja existeix una substitució per a «%s», però com s'ha especificat --force, s'ignoraràja existeix una substitució per a «%s»; s'està interrompentqualsevol desviació de %squalsevol desviació de %s cap a: %sla mida del nom de l'element d'ar «%.s» és massa llargla mida %jd de l'element d'ar és massa gran<buida><cap><desconeguda>l'arquitectura «%s» és il·legal: %sl'arquitectura «%s» és reservada i no es pot afegirl'arquitectura «%s» no és vàlida: %sl'arxiu «%.250s» conté dos elements de control, s'abandonal'arxiu «%s» conté un element prematur «%.*s» abans de «%s», s'abandonal'arxiu «%s» no és un fitxer regularl'arxiu «%s» empra una compressió desconeguda per a l'element «%.*s», s'abandonal'arxiu conté l'objecte «%.255s» de tipus 0x%x desconegutmida de l'element de control de l'arxiuel camp «%s» de detalls de l'arxiu no es permès al fitxer d'estatl'arxiu té un número de versió invàlid: %sl'arxiu té una mida d'element de control mal formatat «%s»l'arxiu no té caràcters de línia nova en la capçaleracapçalera de l'element d'informació de l'arxiul'arxiu té versió de format %d.%d; aconseguiu un dpkg-deb més nounúmero de versió màgic de l'arxiucapçalera de l'element de l'arxiunúmero de la part de l'arxiudesplaçament de la part de l'arxiunombre de parts de l'arxiumida total de l'arxiumode automàticles actualitzacions automàtiques de %s/%s estan desactivades; no hi haurà canviss'està esperant el processat dels activadors per un altre paquetlínia buida dins del valor del camp «%.*s»camp «%s» booleà (yes/no): %strencat a causa d'una desinstal·lació o instal·lació fallidatrencat a causa d'un error en postinsts'està construint un paquet desconegut en «%s».s'està construint el paquet «%s» en «%s».no es pot instal·lar la selecció %s desconegudano es pot executar «mmap» al fitxer d'informació de paquet «%.255s»no es pot eliminar el guió postrm anticno es pot executar «stat» al fitxer «%.255s»no es pot accedir a l'arxiu «%s»no es pot afegir el fitxer (%s) de l'element d'ar a «%s»: %sno es pot afegir la part «%s» del paquet trossejat a «%s»: %sno es pot afegir a «%s»no es pot tancar el conducte de descompressióno es pot calcular el resum MD5 del fitxer «%s»: %sno es pot calcular el resum MD5 per l'arxiu tar «%.250s»: %sno es pot convertir la seqüencia multi-byte «%s» a un caràcter ampleno es pot convertir la cadena multi-byte «%s» a una cadena de caràcters amplesno es pot copiar «%s» a l'arxiu «%s»: %sno es pot copiar de «%s» a «%s»: %sno es pot copiar l'element de l'arxiu de «%s» al conducte de descompressió: %sno es poden copiar les dades extretes de «%.250s» a «%.250s»: %sno es poden desviar directorisno es pot desviar el fitxer «%s» cap a ell mateixno es pot extreure el fitxer de control «%s» de «%s»: %sno es pot extreure la part «%s» del paquet trossejat: %sno es pot obtenir el temps de la última modificació del sistema de fitxers pel paquet %sno es pot obtenir l'identificador d'etiquetatge de seguretatno es pot obrir «%s»no es pot obrir «%.255s» (en «%.255s»)no es pot obrir el fitxer part d'arxiu «%.250s»no es pot obrir el directori «%s»no es pot obrir el fitxer «%s»no es pot obrir el canal de notificació de l'estat de seguretatno es pot llegir «%s»no es pot llegir el directori de fitxers de configuració «%.250s» (a partir de «%.250s»)no es pot llegir el directori «info»no es pot esborrar «%.250s»no es pot esborrar l'arquitectura «%s» que és en ús a la base de dadesno es pot esborrar l'arquitectura no estrangera «%s»no es pot eliminar l'antiga còpia de seguretat del fitxer de configuració «%.250s» (de «%.250s»)no es pot eliminar el fitxer de configuració antic «%.250s» (= «%.250s»)no es pot eliminar la llista de fitxers antigano es pot canviar el nom de «%s» a «%s»no es pot satisfer la predependència per a %.250s (necessària per a %.250s)no es pot examinar el directori «%.255s»no es pot analitzar el directori d'actualitzacions «%.255s»no veu com satisfer la predependència:
+ %sno es pot establir l'ID del grup primari a rootno es pot establir el context de seguretat per a l'objecte de fitxer «%s»no es pot establir el context d'execució de seguretat per al script del mantenidorno es pot ometre l'element de control de l'arxiu de «%s»: %sno es pot ometre l'element de l'arxiu de «%s»: %sno es pot ometre del conducte el fitxer «%.255s» (reemplaçat o exclòs?): %sno es pot ometre el farcit pel fitxer «%.255s»: %sno es pot ometre la capçalera de paquet trossejat «%s»: %sno es pot fer «stat» a «%s»no es pot fer «stat» a «%.255s» (en «%.255s»)no es pot fer «stat» al fitxer «%s»no es pot fer «stat» al nom de camí «%s»no es pot escriure el fitxer «%s» al paginadorno es poden esborrar els possibles zeros finals de dpkg-deb: %sel caràcter «%c» no està permès (només s'admeten lletres, dígits i caràcters «%s»les dades comprimides estan corrompudess'està comprimint l'element de tarel conffile «%.250s» no està dins del paquetno es pot fer «stat» al conffile «%.250s»el conffile «%s» no és un fitxer normalvisualitzador de diferencies de conffileel fitxer «conffile» conté una línia buidael nom del conffile «%s» conté espais en blanc al finalel nom del conffile «%s» està duplicatel nom de conffile «%s» és massa llarg, o li manca el caràcter de línia nova finalintèrpret d'ordres de conffileerror de configuració: %s:%d: %saccions en conflicte -%c (--%s) i -%c (--%s)hi ha desviacions en conflicte en «%.250s» o «%.250s»paquets en conflicte - no s'instal·larà %.250ses considera la desinstal·lació de %s, que seria trencat per %s…es considera la desconfiguració del paquet
+ essencial %s, per a habilitar %ses considera la desinstal·lació de %s en favor de %s…el directori de control té permisos erronis %03lo (ha de ser >=0755 i <=0775)el directori de control no és un directoriel fitxer de control «%s» no existeixel fitxer de control «%s» del paquet «%.250s» conté un nom de fitxer buital fitxer de control «%s» del paquet «%.250s» li manca una línia nova finalel fitxer de control «%s» del paquet «%.250s» manca un valorel fitxer de control «%s» del paquet «%.250s» manca un separador de valorel fitxer de control conté %celement de controlel fitxer de format «%s» de la base de dades «info» està corromputsistema de fitxers de l'arxiu tar corromput en l'arxiu de paquetno s'ha pogut obrir el fitxer de registre «%s»: %sno es pot fer «stat» al fitxer antic «%.250s» així doncs no s'eliminarà: %sno s'ha pogut obrir «%i» per a un fluxl'alternativa actual %s és desconeguda, s'està canviant a %s per al grup d'enllaços %ss'ha trobat un bucle mentre es processaven els activadors:
+ cadena de paquets activadors dels quals són o podrien ser els responsables:element de dadesproblemes de dependències - es deixen els activadors sense processarproblemes de dependències - es deixa sense configurarproblemes de dependències - no es desinstal·laproblemes de dependències impedeixen la configuració de %s:
+%sproblemes de dependències impedeixen processar els activadors de %s:
+%sproblemes de dependències impedeixen la desinstal·lació de %s:
+%sl'opció «--%s» és obsoleta, empreu «--%s» en el seu llocs'està descartant l'enllaç esclau obsolet %s (%s)desviat per %s des de: %s
+desviat per %s cap a: %s
+desviació de %s per %sdesviació de %s cap a %s per %sla desviació no pot contenir línies novesdesviat per %s cap a: %s
+la desviació del fitxer '%s' d'un paquet Essencial amb renombrament és perillós, feu servir --no-renamefet
+s'està desactualitzant %.250s de %.250s a %.250sblocatge de la base de dades de dpkgblocatge frontal de dpkgdpkg no està registrat com a instal·lat, no es pot comprovar el suport per a %s!
+el paquet de l'activador esperat «%.255s» és duplicathi ha un fitxer d'activadors interessats duplicat per al fitxer «%.250s» i el paquet «%.250s»camí duplicat %sl'activador pendent «%.255s» és duplicatenllaç esclau duplicat %snom d'esclau duplicat %svalor duplicat en el camp «%s»valor duplicat pel camp definit per l'usuari «%.*s»el camp «%s» de detalls de l'arxiu és buitnom del camp buitcadena buida de «fgets» en llegir conffilesno es permeten els noms d'activador buitsvalor buit en el camp «%s»final del fitxer després del nom del camp «%.*s»final del fitxer abans del valor del camp «%.*s» (li manca una línia nova final)final del fitxer durant el valor del camp «%.*s» (li manca una línia nova final)final del fitxer en l'entrada estàndard al preguntar sobre conffilesèpoquesl'època en la versió està buidal'època en la versió és negatival'època en la versió no és un númerol'època en la versió és massa grans'ha produït un errors'ha produït un error en comprovar «%s»s'ha produït un error en tancar %.250ss'ha produït un error en tancar el fitxer de configuració «%.250s»s'ha produït un error en tancar/escriure «%.255s»s'ha produït un error en crear el dispositiu «%.255s»s'ha produït un error en crear el directori «%.255s»s'ha produït un error en crear l'enllaç dur «%.255s»s'ha produït un error en crear el nou fitxer de copia de seguretat «%s»s'ha produït un error en crear el conducte «%.255s»s'ha produït un error en crear l'enllaç simbòlic «%.255s»s'ha produït un error en assegurar-se de que «%.250s» no existeixs'ha produït un error en executar el lligam «%s», codi d'eixida %ds'ha produït un error en formatar la cadena a una variable varbufel format de mostra és erroni: %ss'ha produït un error en instal·lar el fitxer nou «%s»s'ha produït un error en obrir el fitxer de conffiless'ha produït un error en obrir el directori de configuració «%.250s»s'ha produït un error en processar l'arxiu %s (--%s):
+ %ss'ha produït un error en processar el paquet %s (--%s):
+ %ss'ha produït un error al llegir %.250ss'ha produït un error en llegir %s del fitxer %.255ss'ha produït un error en llegir el fitxer de conffiless'ha produït un error en llegir des d'un conducte de dpkg-debs'ha produït un error en llegir el fitxer d'activadors ajornats «%.255s»s'ha produït un error en eliminar l'antic fitxer de copia de seguretat «%s»s'ha produït un error en establir el propietari de «%.255s»s'ha produït un error en establir el propietari de l'enllaç simbòlic «%.255s»s'ha produït un error en establir els permisos de «%.255s»s'ha produït un error en establir les dates de «%.255s»s'ha produït un error en intentar obrir %.250ss'ha produït un error en desassignar el senyal %s: %s
+s'ha produït un error en netejars'ha produït un error en escriure «%s»s'ha produït un error en escriure «%s»s'ha produït un error en escriure a «%s»s'ha produït un error en escriure la llista d'arquitectureserror en escriure a l'eixida d'error, s'ha descobert abans de preguntar sobre conffilesno s'ha pogut assignar memòriano s'ha pogut assignar memòria per a l'entrada nova en la llista de paquets que han fallat: %sno s'ha pogut canviar al directori «%.255s»no s'ha pogut canviar al directorino s'ha pogut fer «chroot» a «%.250s»no s'ha pogut tancar després de la lectura: «%.255s»no s'ha pogut crear el directorino s'ha pogut crear un conducteno s'ha pogut fer «dup» per al fd %dno s'ha pogut fer «dup» per a std%sno s'ha pogut fer «fstat» del fitxer de l'element d'ar (%s)no s'ha pogut fer «fstat» a l'arxiuno s'ha pogut fer «fstat» al fitxer de desviacionsno s'ha pogut fer «fstat» al fitxer de statoverrideno s'ha pogut crear el fitxer temporal (%s)no s'ha pogut obrir per lectura el fitxer de configuració «%.255s»: %sno s'ha pogut obrir el fitxer de desviacionsno s'ha pogut obrir el fitxer d'informació del paquet «%.255s» per la lecturano s'ha pogut obrir el fitxer de statoverrideno s'ha pogut obrir el fitxer d'activadors interessats «%.250s»no s'ha pogut llegirno s'ha pogut llegir «%.255s» (en «%.255s»)no s'ha pogut llegir l'arxiu «%.255s»no s'ha pogut eliminar el fitxer d'actualització incorporat %.255sno s'ha pogut esborrar el nostre propi fitxer d'actualització %.255sno s'ha pogut tornar al principi del fitxer temporal (%s)no s'ha pogut tornar al principi de fitxer d'activadors interessats «%.250s»no s'ha pogut reposicionarno s'ha pogut fer «stat» (dereferència) a l'enllaç simbòlic existent «%.250s»no s'ha pogut fer «stat» (dereferència) a l'objectiu del nou enllaç simbòlic proposat «%.250s» per a l'enllaç simbòlic «%.250s»no s'ha pogut fer «stat» del fitxer temporal (%s)no s'ha pogut esborrar el fitxer temporal (%s), %sno s'ha pogut escriureno s'ha pogut escriure el registre de la base de dades %s sobre «%.50s» a «%.250s»no s'han pogut escriure els detalls de «%.50s» a «%.250s»no s'ha pogut escriure el nom del fitxer al conducte de tar (%s)«fgets» ha donat una cadena buida des de «%.250s»el nom de camp '%.*s' no pot començar amb un guióel nom del camp «%.*s» ha d'estar seguit per dos puntsl'amplada del camp és fora de rangel fitxer «%.250s» té una versió de format invàlida: %sel fitxer «%.250s» està corromput - manca %.250sel fitxer «%.250s» està corromput - resum MD5 «%.250s» erroniel fitxer «%.250s» està corromput - número màgic de la capçalera de l'arxiu erroniel fitxer «%.250s» està corromput - número de part de l'arxiu erroniel fitxer «%.250s» està corromput - dígit erroni (codi %d) en %sel fitxer «%.250s» està corromput - valor màgic erroni al final de la primera capçalerael fitxer «%.250s» està corromput - valor màgic erroni al final de la segona capçalerael fitxer «%.250s» està corromput - nombre de parts de l'arxiu erroniel fitxer «%.250s» està corromput - caràcter de farcit erroni (codi %d)el fitxer «%.250s» està corromput - manca una línia nova després de %.250sel fitxer «%.250s» està corromput - no hi ha una barra entre els nombres de parts de l'arxiuel fitxer «%.250s» està corromput - hi ha nuls en la secció d'info.el fitxer «%.250s» està corromput - el segon element no és un element de dadesel fitxer «%.250s» està corromput - la mida està equivocada pel número de part indicadael fitxer «%.250s» està corromput - massa curtel fitxer «%.250s» està corromput - número equivocat de parts per a les mides indicadesel fitxer «%.250s» té versió de format %d.%d; necessiteu un dpkg-split més nouel fitxer «%.250s» no és un arxiu binari de Debian (proveu amb el dpkg-split?)el fitxer «%.250s» no és una part d'arxiuel fitxer «%s» està corromput; número sencer fora de rang en %sel fitxer «%s» no és una part d'arxiu
+el format del fitxer no és conegutel fitxer sembla ser un arxiu que ha estat corromput
+ al ser descarregat en mode ASCIIel fitxer no pot contenir línies novesel registre d'activadors de fitxer menciona el nom de paquet il·legal «%.250s» (per l'interès en el fitxer «%.250s»): %.250sel nom de fitxer «%s» no és absolutels fitxers «%.250s» i «%.250s» no són parts del mateix fitxerel fitxer de la llista de fitxers del paquet «%.250s» conté un nom de fitxer buital fitxer de la llista de fitxers del paquet «%.250s» li manca una línia nova finalmanca el fitxer de la llista de fitxers del paquet «%.250s», s'assumirà que el paquet no té cap fitxer actualment instal·latprimera paraula (de requeriment) al camp «%s»: %ss'està forçant la reinstal·lació de l'alternativa %s perquè el grup d'enllaços %s és trencatha fallat el «fork»número de versió del format seguit de brossanúmero de versió del format no conté un puntnúmero de versió del formatnúmero de versió del format amb component principal buitnúmero de versió del format amb component secundari buitnúmero de versió del format amb component principal massa grannúmero de versió del format amb component secundari massa grans'han trobat paquets desconeguts; això pot significar que la base de dades
+està desactualitzada i necessita ser actualitzada amb un mètode de frontal;
+vegeu les PMF <https://wiki.debian.org/Teams/Dpkg/FAQ> (anglès)s'ha generat una capçalera ar corrompuda per a «%s»el grup «%s» no existeixhi ha un valor invàlid «%.50s»hi ha brossa al finalla capçalera és massa llarga, fent la part massa llarga; el nom del paquet
+o el número de versió deuen ser extraordinàriament llargs o quelcom similar;
+s'està abandonants'omet %d avís sobre els fitxers de controls'ometen %d avisos sobre els fitxers de controls'ignorarà el trencament, es pot procedir igualment!s'ignorarà el conflicte, es pot procedir igualment!no es tindrà en compte el problema de dependència amb %s:
+%ss'està ignorant el problema de predependència!s'està ignorant la petició de desinstal·lar %.250s que no està instal·lates descarta la petició de desinstal·lar %.250s, del qual
+ només els fitxers de configuració queden en el sistema; empreu --purge per
+ a esborrar també aquests fitxersel nom de l'arquitectura en l'especificador «%s:%s» és il·legal: %sel nom de paquet esperat «%.255s» és il·legal: %.250ss'ha trobat un nom de paquet il·legal en la línia %d: %.250sel nom del paquet al activador esperat «%.255s» és il·legal: %sel nom del paquet en l'especificador «%s%s%s» és il·legal: %sel nom de l'activador pendent «%.255s» és il·legal: %sel format (%d) de la base de dades «info» és erroni o massa nou; proveu amb una versió més nova de dpkgel fitxer d'informació %s/%s no està associat a cap paquetinstal·lació de «%.255s»instal·lats'ha instal·lat el script %s del paquet %sinstal·lar %.250s trencaria %.250s, i
+ la deconfiguració no és permesa (--auto-deconfigure podria ajudar)la instal·lació del paquet %.250s trencaria el programari existents'ha produït un error interns'ha produït un error internel caràcter ‘%c’ no és vàlid en la mida de l'element «%.16s» de l'arxiu «%.250s»el caràcter «%c» no és vàlid en l'amplada del campcaràcter no vàlid al número de revisiócaràcter no vàlid al número de versiónivell de compressió invàlid per a -%c: %ldparàmetres de compressió invàlids: %snúmero de versió de format deb invàlida: %sl'enter no és vàlid per a -%c: «%.250s»l'enter no és vàlid per a --%s: «%.250s»la sintaxi del nom de l'activador «%.250s» no és vàlida o desconeguda (als activadors interessats per al paquet «%.250s»el nom del paquet «%.250s» no és vàlid al fitxer d'activadors ajornats «%.250s»el nom de paquet no és vàlid en el camp «%s»: %sel gid %s de statoverride no és vàlidel mode %s de statoverride no és vàlid l'uid %s de statoverride no és vàlidl'estat no és vàlidla suma de verificació de la capçalera tar no és vàlidael camp de suma de verificació de la capçalera tar no és vàlidel camp «gid» de la capçalera tar no és vàlidel camp «mtime» de la capçalera tar no és vàlidel camp de mida de la capçalera tar no és vàlidel camp «uid» de la capçalera tar no és vàlidla capçalera tar és invàlida amb un nom de camp buitel nom d'activador «%.250s» no és vàlid: %.250s»li manca un valorla línia no estava terminada en llegir %slínia massa llarga o no terminada en llegir %sl'enllaç %s és alhora primari i esclauno es pot carregar el fitxer de control «%s» del paquet «%s»s'esta carregant el fitxer de la llista de fitxers del paquet «%s»desviació local des de: %s
+desviació local de %sdesviació local de %s cap a %sdesviat localment cap a: %s
+desviat localment cap a: %s
+noms de fitxer llargsel guió del mantenidor «%.50s» té permisos erronis %03lo (ha de ser >=0555 i <=0775)el guió del mantenidor «%.50s» no és un fitxer normal o un enllaç simbòlicno es pot fer «stat» al guió del mantenidor «%.50s»ha fallat el «malloc» (%zu octets)mode manualfitxer mestreenllaç mestrepoden haver-hi problemes en desinstal·lar %s, donat que proveeix %s…no pot ser una cadena buidas'ha arribat al limit d'ús de memòriadiscrepància a la desviació
+  en suprimir «%s»
+  s'ha trobat «%s»discrepància al paquet
+  en suprimir «%s»
+  s'ha trobat «%s»manca el camp «%s»manca la clau de tancamenthi ha una mescla d'instàncies de paquet no coinstal·lables i coinstal·lables presents; molt probablement degut a una actualització des d'un dpkg no oficialmulti-arquitecturamúltiples Conflicts i Replaceshi ha múltiples instàncies de paquet no coinstal·lables presents; molt probablement degut a una actualització des d'un dpkg no oficialhi ha múltiples statoverrides per al fitxer «%.250s»s'ha d'executar des d'un script de mantenidor (o amb una opció --by-package)ha de començar amb un caràcter alfanumèricha de començar amb un caràcter alfanumèricel nom %s és alhora primari i esclaues necessita una opció d'accióguió «%s» nou del paquet %slínia nova dins del nom del camp «%.*s»no es permet una línia nova al nom de l'objecte de l'arxiu «%.250s»no es permet una línia nova al nom del camí «%s»les línies noves no estan permesos als fitxers d'update-alternatives (%s)no hi ha cap fitxer «control» en l'arxiu de control!no hi ha alternatives per a %sno hi ha cap substitució presentno hi ha informació de paquets en «%.255s»no hi ha instal·lat cap paquet anomenat «%s», no es pot configurarno s'ha trobat cap paquet que correspongui amb %sno s'ha trobat cap paquet que correspongui amb %sno, %s és essencial, no serà desconfigurat
+ per a habilitar %sno, no es pot continuar amb %s (--auto-deconfigure ajudarà):
+%sno es comprova el contingut de l'àrea de controlmanquen privilegis per a canviar el directori arrel amb --force-not-root, considereu emprar --force-script-chrootless?no instal·latno instal·lat però resta la seva configuracióno s'esborrarà %s ja que no és un enllaç simbòlicno es reemplaça %s amb un enllaçno hi ha res darrere dels dos punts al número de versiónom de paquet buit en la llista separada per comes «%2$.250s» de --%1$snombre de parts de l'arxius'ha utilitzat un camp «%s» obsoletl'opció «--%s» és obsoleta; els paquets no disponibles es netegen automàticamenttipus de compressió «%s» obsolet; empreu xz en el seu lloctipus de compressió «%s» obsolet; empreu xz o gzip en el seu llocl'opció de forçat/refusat «%s» és obsoletal'opció «--%s» és obsoletaguió de «%s» antic del paquet %sel conffile antic «%.250s» era un directori buit (i s'ha eliminat)el fitxer antic «%.250s» és igual que diversos fitxers nous! («%.250s» i «%.250s»)la versió antiga del paquet té un nom de fitxer d'informació llarguíssim que comença per «%.250s»només podeu emprar versions exactes per al camp «%s»l'obertura del component «%.255s» (dins de %.255s) ha fallat de forma inesperadamemòria exhaurida per a una entrada nova de netejamemòria exhaurida per a una entrada nova de neteja amb massa argumentsmemòria exhaurida per a un context nou d'errors'ha produït un error fora d'un context d'error, s'esta interrompentno es tindrà en compte el problema per estar activa una opció --force:el paquet %.250s ja està instal·lat i configuratel paquet %.250s no està llest per a configurar-se
+ no es pot configurar (estat actual «%.250s»)el paquet %.250s no està llest per a processar activadors
+ (estat actual «%.250s» amb cap activador pendent)el paquet %s %s no es pot configurar perquè %s és en una versió (%s) diferentel paquet %s (%s) amb camp «%s: %s» no és coinstal·lable amb %s, el qual té múltiples instàncies instal·ladesel paquet %s no es pot configurar perquè %s no està llest (estat actual «%s»)el paquet %s conté «list» com a fitxer d'informacióel paquet %s requereix ser reinstal·lat, però es desinstal·larà tal i com heu demanatel paquet %s requereix ser reinstal·lat, no es desinstal·laràel paquet %s estava en mantindre, es processarà igualment tal com heu demanatel paquet «%s» no està disponibleel paquet «%s» no està instal·latel paquet «%s» no està instal·lat i no hi ha informació disponiblearquitectura del paquetl'arquitectura del paquet (%s) no correspon amb la del sistema (%s)l'arquitectura del paquet manca o és buidael paquet conté un nom de fitxer d'informació llarguíssim (comença per «%.50s»)la informació de control del paquet conté el directori «%.250s»a l'esborrar el directori «%.250s» amb la informació de control del paquet ocorregué un error diferent com de no ser un directoriextracció de la informació de control del paquetel paquet desvia a d'altres cap a %s
+extracció del valor del camp del paquetresum MD5 del fitxer de paquetextracció de l'arxiu de sistema de fitxers del paquetel paquet té el camp «%s» però és d'arquitectura “%s”el paquet te el camp «%s» però li manca una arquitecturael paquet té testat %s i té “conffiles”, ens n'oblidemel paquet té l'estat %s però no s'esperen activadorsel paquet té estat %s però els activadors no són pendentsel paquet té l'estat %s però s'esperen activadorsel paquet té estat %s però els activadors són pendentsel paquet està en un estat molt dolent i inconsistent; l'haureu de
+ reinstal·lar abans d'intentar desinstal·lar-loel paquet està en un greu estat d'inconsistència; heu de
+ reinstal·lar-lo abans d'intentar la seva configuracióel paquet no pot contenir línies novesnom del paquetel nom de paquet «%s» no és vàlid: %sel nom del paquet té caràcters que no són minúscules, alfanumèrics o «-+».no s'ha trobat el paquet a les bases de dades d'estat o disponible en la línia %d: %.250sverificació de la signatura del paquetnúmero de versió del paquetpaginador per mostrar el fitxermanca la part %del fitxer part «%.250s» no és un fitxer normalla mida de la part és massa gran o no és positivala mida de la part ha de ser d'almenys %d KiB (per a admetre una capçalera)la capçalera tar s'ha llegit parcialmentcorrecte
+enganxael camí no pot contenir línies novesespecifiqueu --no-rename explícitament, l'opció predeterminada canviar a --rename a 1.20.xproblema de predependència - no s'instal·larà %.250sprioritatla prioritat està fora de rangla prioritat ha de ser un enterla prioritat de %s està fora de rang: %sprioritat de %s: %scamp «%s» d'estat quàdruple (foreign/allowed/same/no): %serror de lectura en %.250serror de lectura a «%.250s»error de lectura al fitxer de configuració «%.250s»error de lectura en l'entrada estàndarderror de lectura en l'entrada estàndard al preguntar sobre conffiless'ha produït un error al llegir el fitxer d'informació de paquet «%.255s»s'ha produït un error al llegir el fitxer d'informació de paquet «%.255s»: %ss'ha produït un error en llegir el fitxer de statoverride «%.250s»fitxer de paquet reconstruïtreferent a %s que conté %s, problema de predependència:
+%sreferent a %s que conté %s:
+%sdesinstal·lació de %.250ss'esta esborrant l'arquitectura «%s» que és en ús a la base de dadess'està suprimint l'alternativa seleccionada manualment - s'està canviant %s a mode automàticel canvi de nom implica sobreescriure «%s» amb
+  el fitxer diferent «%s», no és permèscanvi de nom: elimina l'enllaç vell duplicat «%s»la operació sol·licitada requereix privilegis de superusuaril'operació requereix accés de lectura i escriptura al directori %s de la base de dades de dpkges requereix accés d'escriptura al directori «%s» de la base de dades de dpkg per a una actualització d'«available»el número de revisió està buitordre «rm» de netejas'ha indicat com conffile el directori arrel o un directori buit en el camp «%s»s'ha buscat, però no s'han trobat paquets (fitxers que coincidisquen amb *.deb)segona paraula (d'error) al camp «%s»: %s<desconeguda>s'està configurant la selecció automàtica de %ss'han trobat diverses entrades d'informació de paquets, només se'n permet unaordre d'intèrpret per moure fitxerss'està mostrant la llista de paquets en el paginadors'omet la creació de %s perquè el fitxer associat «%s» (del grup d'enllaços %s) no existeixfitxer esclauenllaç esclaul'enllaç esclau és el mateix que l'enllaç principal %snom de l'esclauel fitxer font «%.250s» no és un fitxer normalmuntatge del paquet trossejatel fitxer de statoverride conté una línia buidaal fitxer de statoverride li manca una línia nova finalestatregistre d'estats'està suprimint la / del finalel subprocés %s retornà el codi d'eixida d'error %dla mida de l'enllaç simbòlic «%.250s» ha canviat de %jd a %zderror de sintaxi al fitxer d'activadors de fitxer «%.250s»error de sintaxi al fitxer de statoverrideerror de sintaxi al fitxer d'activadors ajornats «%.250s» en la línia %d al caràcter %zd «%s»només accepta un argument, el nom de l'activadorl'objectiu és un directori - no es pot ometre la comprovació del fitxer de controlhi han diverses versions de la part %d - almenys «%.250s» i «%.250s»no hi ha cap guió en la versió nova del paquet - s'està abandonanttercera paraula (d'estat) al camp «%s»: %saquest és un paquet essencial; no hauria de ser desinstal·latper tornar a activar les actualitzacions automàtiques, utilitzeu «%s --auto %s»valors insuficients en el camp «%s» dels detalls de l'arxiu (comparat amb d'altres)massa errors, s'està aturants'han produït massa errors niuats durant la recuperaciómassa valors en el camp «%s» de detalls de l'arxiu (comparat amb d'altres)la línia és massa llarga o manca una línia nova a «%.250s»l'arrel pel caminador de l'arbre «%s» no és un directorierror de sintaxi al fitxer d'activadors interessats «%.250s»; el nom del paquet «%.250s» és il·legal: %.250sel nom de l'activador «%s» no és vàlid: %sel nom de l'activador conté un caràcter invàlidencara no existeixen els registres dels activadorsactivatel fitxer d'informació de control dels activadors «%.250s» conté sintaxi d'activador il·legal al nom d'activador «%.250s»: %.250sel fitxer d'informació de control dels activadors conté la directiva desconeguda «%.250s»el fitxer d'informació de control dels activadors conté sintaxi de directiva desconegudaencara no s'ha creat el directori de dades dels activadorsblocatge de la base de dades d'activadorshi ha un bucle d'activadors, s'ha abandonats'està provant el guió del paquet nou en el seu lloc…s'està intentant sobreescriure «%.250s», que també està en el paquet %.250s %.250ss'està intentant sobreescriure «%.250s», que és la versió desviada de «%.250s»s'està intentant sobreescriure «%.250s», que és la versió desviada de «%.250s» (paquet: %.100s)s'està intentant sobreescriure el directori «%.250s» del paquet %.250s %.250s amb un no directoris'està intentant sobreescriure «%.250s» compartit, que és diferent d'altres instàncies del paquet %.250ss'ha especificat dos ordres: --%s i --%sno es pot (re)obrir el fitxer part d'entrada «%.250s»no es pot accedir al directori «%s» de la base de dades de dpkg per a una actualització d'«available»no es pot accedir al directori %s de la base de dades de dpkgno es pot canviar el propietari del fitxer destí «%.250s»no es pot comprovar l'existència de «%.250s»no es pot comprovar l'estat de blocatge del fitxer «%s»no es pot comprovar l'existència de l'arxiu «%.250s»no es pot comprovar l'estat de blocatge pel directori %s de la base de dades de dpkgno es pot fer «chown» a l'enllaç simbòlic de la còpia de seguretat de «%.255s»no es pot netejar el desordre de «%.255s» abans d'instal·lar una altra versióno es pot tancar el fitxer «%s»no es pot tancar el fitxer nou «%.250s»no es pot tancar el fitxer d'activadors ajornats nou «%.250s»no es pot tancar l'estat d'actualització de «%.250s»no es pot crear «%.255s»no s'ha pogut crear «%.255s» (en processar «%.255s»)no es pot crear el fitxer «%.250s»no es pot crear el fitxer nou «%.250s»no s'ha pogut crear el directori temporalno es pot crear el directori d'estat dels activadors «%.250s»no es pot eliminar el fitxer d'informació de control «%.250s»no es pot esborrar el directori antic «%.250s»: %sno es pot esborrar el fitxer de dipòsit emprat «%.250s»no es pot descartar «%.250s»no es pot executar %s (%s)no es pot emplenar %.250sno es pot fer «flush» en %.250s després del farcimentno es pot fer «flush» al fitxer «%s»no es pot fer «flush» al fitxer nou «%s»no es pot fer «flush» amb l'estat d'actualització de «%.250s»no es pot fer «fstat» al fitxer fontno es pot fer «fsync» a l'estat d'actualització de «%.250s»no es pot obtenir el descriptor de fitxer del directori «%.250s»no es pot descartar el senyal %s abans d'executar %.250sno es pot instal·lar «%.250s» com a «%.250s»no es pot instal·lar el (suposat) fitxer d'informació nou «%.250s»no es pot instal·lar el fitxer d'informació nou «%.250s» com a «%.250s»no es pot instal·lar el fitxer d'activadors ajornats nou «%.250s»no es pot instal·lar una versió nova de «%.255s»no es pot instal·lar l'estat actualització de «%.250s»no es pot desblocar %sno es pot crear un enllaç de seguretat de «%.255s» abans d'instal·lar la versió novano es pot fer una còpia de seguretat de l'enllaç simbòlic per a «%.255s»no es pot moure «%.255s» per a instal·lar una versió novano es pot obrir «%.255s»no es pot obrir el directori «%s»no es pot obrir el fitxer «%s»no es pot obrir el fitxer de dipòsit nou «%.250s»no es pot obrir el fitxer d'eixida «%.250s»no es pot obrir el fitxer font «%.250s»no es pot obrir el directori de control temporalno es pot obrir el fitxer d'informació de control dels activadors «%.250s»no es pot obrir el fitxer d'activadors ajornats «%.250s»no es pot obrir/crear el fitxer de blocatge de la base de dades de dpkg per al directori %sno es pot obrir/crear el fitxer de blocatge frontal de dpkg per al directori %sno es pot obrir/crear el fitxer d'activadors ajornats nou «%.250s»no es pot obrir/crear el fitxer de blocatge d'activadors «%.250s»no es pot analitzar la marca horària «%.255s»no es pot llegir el directori de dipòsit «%.250s»no es pot llegir el fitxer d'activadors de fitxer «%.250s»no es poden llegir las propietats del descriptor de fitxers per a %.250sno es pot llegir l'enllaç «%.255s»no es pot llegir el fitxer part «%.250s»no es pot eliminar «%s»no es pot eliminar la còpia de seguretat de «%.250s»no es pot esborrar la copia «%s» del fitxer origenno es pot eliminar la versió acabada d'extraure de «%.250s»no es pot eliminar la versió acabada d'instal·lar de «%.250s»no es pot esborrar la versió acabada d'instal·lar de «%.250s» per a permetre la reinstal·lació de la còpia de seguretatno es pot esborrar el fitxer d'informació obsolet «%.250s»no es pot canviar el nom del fitxer de dipòsit nou «%.250s» a «%.250s»no es pot reobrir el fitxer part «%.250s»no es pot restablir la versió de la còpia de seguretat de «%.250s»no es pot esborrar «%.250s» de forma segurano es pot esborrar «%.255s» de forma segurano es pot esborrar el fitxer antic «%.250s» de format segura: %sno es pot tornar al principi de %.250s després del farcimentno es pot establir emmagatzemament intermedi al fitxer de la base de dades %sno es pot establir l'atribut close-on-exec per a «%.250s»no es poden establir els permisos d'execució en «%.250s»no es pot establir el mode del fitxer destí «%.250s»no es pot fer «setenv» per al script del mantenidorno es pot fer «setenv» per al subprocésno es pot fer «stat» a %s «%.250s»no es pot fer «stat» a %s «%.250s»: %sno es pot fer «stat» a «%.250s»no es pot fer «stat» al directori de controlno es pot fer «stat» al conffile «%.250s» actualment instal·latno es pot fer «stat» al conffile de nova distribució «%.250s»no es pot fer «stat» al fitxer nou «%.250s»no es pot fer «stat» al «%.255s» restablert abans d'instal·lar una altra versióno es pot fer «stat» al fitxer font «%.250s»no es pot fer «stat» al fitxer d'activadors ajornats «%.250s»no es pot fer «sync» al directori «%s»no es pot fer «sync» al fitxer «%.255s»no es pot fer «sync» al fitxer «%s»no es pot fer «sync» al fitxer nou «%.255s»no es pot truncar l'estat actualitzat de «%.250s»no es pot desblocar %sno es pot escriure el fitxer «%.250s»no es pot escriure el fitxer nou «%.250s»no es pot escriure el fitxer d'activadors ajornats nou «%.250s»no es pot escriure al descriptor de fitxer d'estat %dno es pot escriure l'estat d'actualització de «%.250s»cometes desequilibrades a «%s»error inesperat de bzip2s'han trobat dades inesperades després del paquet i selecció en la línia %ds'ha trobat un final de fitxer inesperat després del nom del paquet en la línia %dfinal del fitxer inesperat abans del final de la línia %dfi de fitxer inesperada en %s en %.255ss'ha trobat un final de fitxer inesperat en el nom del paquet en la línia %ds'ha trobat una fi de fitxer o flux inesperadas'ha trobat un final del fitxer inesperat en llegir «%.250s»fi de fitxer inesperada en llegir %ss'ha trobat una fi d'entrada inesperadas'ha trobat un fi de línia inesperat després del nom del paquet en la línia %ds'ha trobat un fi de línia inesperat en el nom del paquet en la línia %ds'ha trobat una fi de línia inesperada al fitxer de statoverrides'ha trobat un nom de camí %s pre-existent inesperatl'argument «%s» és desconegutel tipus d'estratègia de compressió és desconegutel tipus d'estratègia de compressió «%s» és desconegut!el tipus de compressió «%s» és desconegut!número de versió de format deb desconeguda: %sl'opció de forçat/refusat «%.*s» és desconegudal'opció «%s» és desconegudal'opció -%c és desconegudal'opció --%s és desconegudagrup de sistema «%s» desconegut en el fitxer statoverride; el grup de sistema s'ha eliminat abans de la substitució, que és probablement un error en l'empaquetat, per a recuperar-ho podeu eliminar manualment la substitució amb %susuari de sistema «%s» desconegut en el fitxer statoverride; l'usuari de sistema s'ha eliminat abans de la substitució, que és probablement un error en l'empaquetat, per a recuperar-ho podeu eliminar manualment la substitució amb %sel tipus de capçalera tar «%c» és desconegutl'opció del format de sortida de verificació «%s» és desconegudas'ha trobat un estat desitjat desconegut en la línia %d: %.250sdesempaquetat però sense configurars'ha produït un error greu irrecuperable, s'esta interrompentno s'admet el tipus '%c' de capçalera de tar GNUno s'admet el tipus '%c' de capçalera de tar PAXno s'admet el tipus '%c' de capçalera de tar Solarisno s'admet el nivell de compressió preestablertel tipus de compressió «%s» no està admès amb compressió uniformeno s'admeten les opcions a la capçalera del fitxerel tipus de la comprovació d'integritat no és conegutel directori d'actualitzacions conté el fitxer «%.250s», amb un nom massa gran (longitud=%d, màx=%d)el directori d'actualitzacions conté fitxers amb noms de diferents longituds (%d i %d)s'està actualitzant l'alternativa %s perquè el grup d'enllaços %s ha canviat els enllaços esclausl'usuari «%s» no existeixel nom de camp definit per l'usuari «%.*s» és massa curts'està emprant %s per a proveir %s (%s) en mode automàtics'està emprant %s per a proveir %s (%s) en mode manualel valor del camp «%s» conté una línia que comença amb un caràcter «%c» que no és un espaiel valor de «%s» té una línia amb format erroni «%.*s»el valor pel camp «%s» no està permès en aquest contextha fallat la verificació del paquet %s!ha fallat la verificació del paquet %s; però s'instal·larà igualment tal i com heu demanat<cap>la versió %.250s de %.250s ja és instal·lada, es descartala versió «%s» té una sintaxi incorrectala versió «%s» té una sintaxi incorrecta: %sel número de versió no comença amb un digitel número de versió està buitla cadena de versió té espaisla cadena de versió està buidaProvides amb versiól'espera per al subprocés %s ha fallatel «wait» per al subprocés %s ha fallatavísmentre es llegia %s: %sal desinstal·lar %.250s, el directori «%.250s» no està buit, no s'esborraal desinstal·lar %.250s, no es pot esborrar el directori «%.250s»: %s - el directori podria ser un punt de muntatge?no es desactualitzarà %.250s de %.250s a %.250s, es descartaparaula al camp «%s»: %ssí, es desconfigurarà %s (trencat per %s)sí, es desinstal·larà %s en favor de %sno teniu permís per a blocar el directori %s de la base de dades de dpkg heu d'especificar els paquets pels seus noms propis, no citant els noms dels fitxers en els que venen
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/cs.gmo dpkg-1.20.7.1/po/cs.gmo
--- dpkg-1.20.7.1-orig/po/cs.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/cs.gmo	2021-06-09 18:25:14.331502477 -0500
@@ -0,0 +1,732 @@
+����Q,?pT?qTa�TkU�U�GV&�V=�V&-WTW-hX.�X�X.�XY !Y4BYwY5�Y-�Y.�Y0&Z1WZ$�Z4�Z/�Z[q+[(�[$�[�[\:+\6f\1�\1�\!]2#](V]]�]!�]�]�]^^.!^P^S\^�^�^�^9�^m2_)�_:�_9`.?`'n`&�`�`3�`5a=aCavPa[�aU#byb�b�b�b�bZ�b+c<c�Kc=dUdjd{d�d��d={fR�f1gD>gL�gA�g'h&:h(ah'�h+�h4�h!i,5i9bi-�i�i#�ij$+jPj"mj�j!�j#�j�j	kk0kEk"ek2�k1�k/�kl.4lcl-~lR�lH�lQHmA�me�mfBnI�n7�n<+oho({oB�o�o�op
,p :p[p5tp1�p@�p0qNq`q#yq!�q�q�qK�q7Er5}r-�r�r!�rs'7s-_s-�s �s5�st 2tSt"kt!�t"�t!�t$�t,u.Gu.vu.�u�uH�u6=v(tv>�v$�v w"wAwHwTw�lwx"x#9x:]x-�y�y�y�y�y*z<2z#oz-�z-�z��z�{�{��{[�|��|g��
]�k���(��-ń�8�<H�.����0˅3��10�b�o������0K�1|�*��Jه2$��W�&��2#�EV�V���5�.B�-q�+��/ˋ
��%	�//�*_�&��!��+ӌB��]B���!��MǍ�2+��^��
+�"��ő4�.�5H�3~���G8
+�,C�p�(������ϓG�3�3<�)p�$��:��,��V'� ~���*�����&�32�-f�+��,��	���
�*%�P�f� ��H�������Řgx�j���K��&�4��5)��_��'���u��&�A;�{}�!��,�*H�.s�������E� ɢ5� � 7�,X�$��.��>٣*�;C�,�����_�;�V�u^��Ԧ"��Чܧ�9��(/�XX�3��?�8%�2^�1��,é:�4+�5`�4��A˪M
�-[�����#��۫��
�!� 8�1Y�%��8��?�"*�BM�6��ǭ&�.
+�!9�![�5}���Ю����$�	7�9A�.{�#��,ί��$�?�^�%~���%ð�-�12�d�z�)��1ñ:��?0�&p���=��7�*�!D�.f�*��#��"�&�.�0I�:z���д@�+(�;T�3��ĵ�A��>�&]�-��#��0ֶ;�0C�(t�?��)ݷ-�"5�X�n�4��E����,5�"b�!����5ƹ ��8�V�e�-��5��,�B�BX�+��Gǻ$� 4�:U�;��3̼=�>�W�&f���7���D��cD���2��*�"�35�:i�-��&ҿ���+�A�"]�����(��=��*�J/�z�"��������-��,�)=�%g�#��@��@��'3�[�a�{�����������)�,�K�!j�!��#����%��%�';�,c�������*��'�'8�`�!u��� ��-��#�#'�+K�%w�$���� �����0�C�"Y�:|���F���4�Q�$n���������#���0�!P�"r�:����5�� %�2F�y�%����0��*��$*�/O��6��V��"�(?�h�<x�.��)��(�*7�+b���,��)��4�36�2j�4��;��<�6K�:��7��@��06�;g�?��$��A�=J�$��0��!���b�~�c���:�<Y�=��_��H4�}�������)��)��-�$��
��'�\��&�&/�'V� ~�7��t��2L�-�'��4��.
+�)9�Gc�-����	��k��/f�����>��%��$�#D�&h�!����!��"��^�@t�������
+�%�+?�7k�!���������)�B�OQ�8��*����+�7�3C�w���7��5���|.�
+����m��0D�Gu���)��!�)�?�3\�$��5��%���(�"<�4_���!��C��=�%V�
|� ��(����%��7�O�Ig�.��6��!�9�GP�P��G��.1�?`�#��7��#�� �+@�2l�Y��f��L`�M��&��K"�3n�=������=�Z�4o�(��F��1�;F�&��������%�.'�.V�a��e�� M�n� {�D��?��!�@�W�&j�-��7�������.#�R�[�t�"��������)���&9�"`�"��"����6���8�7J�B��H��&�05�f��6����$��4�9�OU�
+��
+����
+��%���%%�*K�v�
}���+��7��+�!0�MR�$��4��F��@A�6��1����,�,2�#_�R�� ��'��$�	D�ZN�4��2��'�9�.U�D��G��Y�Qk�^��%�+B�2n�%��%��1��+�NK���!��3��*
+�5�5O���"��$��2��++G,s��"�$�!7*Y�*�0�0�&-3T4�5�)�,JD\*�4�7&P#w#�%�(�.9="w'�*�.�!9[(q(�4�4�[-,�4�#�,"<"_/�/�+�+	-:	*h	&�	!�	�	�	
+ .
+2O
+0�
+&�
+B�
+#.Ap�� �1�+!E3g�*��
6
4N
,�
&�
1�
 	'*.R�4�1�+,B"_��"���
+!(@i#��:�"#&SJM�E�2(K(t*�.�0�"(IK�4���(>"Vy����B�`"9�'�#�`	�jD�k?x��$�#�?�(��#-
+,8e0v��2�82+k4�1�0�&/5V0��o�3F)z!��D�:) 2d .� � /� "!7!$H!0m!�!"�!�!�!2"
+:"qE"�"�"!�":#jF#?�#;�#*-$/X$=�$.�$�$+%27%j%
n%�|%�_&��&~'�'�'�'�'U�'1(C(�U(N:)�)�)�)�)��)[�+p.,F�,K�,U2-J�-,�-+..,.-[.C�.B�.-/>>/H}/@�/'01/0'a01�0&�00�0&1*:10e1�1�1�1�12#2QA2J�26�23C23(v3@�3O�3H04ry4J�4t75s�5X 6=y6I�6717CN7�7�7�7
�7/�7"81?8/q8=�8.�89&9"F9(i9 �9�9K�9B:=`:,�: �:0�:#;)A;5k;6�;&�;9�;%9<$_<$�<(�<#�<(�<%=#E=7i=<�=/�=0>"?>Db>2�> �>E�>(A?#j?#�?�?
+�?�?��?j@w@&�@I�@6B7BJB^BtB)�BC�B5�B50C6fC��C6DCD�`DW_E �E��I_K$}L�M:�MB�M@N?^ND�N9�NO92O9lOH�O�O�OP P";Q4^Q!�QT�Q:
+R}ER)�SI�Si7T��T.U7MU-�U9�U+�U0VJV1aV0�V2�V/�V''W/OWMWY�W'X9.XPhX�X6�X�Y��Z*K\'v\2�\-�\7�\97]q]N�]?�]0^G^3d^�^�^!�^F�^_7!_#Y_6}_C�_;�_j4`"�`�`)�`"a*aCa7ca7�a5�a(	b2b#:b ^b2b%�b'�b%cn&c�c��c��dj%em�e��e��f-�g<h�Qh�Ci�'j��j$�kF�k�l%�l3m9Hm9�m#�m��m��o5lp7�p�p$�p9q(SqB|qY�q8rBRr=�r��r�~s<Tt�t��t�0u< v]vmv}vI�v>�v[w8swE�w>�w81x6jx4�xD�x:y9Vy;�yI�yKz0bz�z�z/�z/�z-{
+9{D{)P{5z{.�{B�{T"|'w|Q�|:�|#,}-P}C~}+�}�}G~P~o~�~�~�~�~�~F�~4F0{7�#�(�'1�#Y�3}�$��4ր$�30�Dd���!ā1�9�@R�M��2�*�E?�B��ȃ+�5
�8C�9|�-��#�"�F+�Nr����=��6<�Js�J��&	�'0�CX�&��;Ç+��,+�8X�?��:ш/�K<�6��>��1��#0�"T�8w�T��"�(�<:�<w�6��/�8�1T�a����,%�.R�,��K��O��,J�Kw�&Î"�M
�R[�>��J�8�V�;h� ��IŐ"�N2�u����@�7G�-�;��G�81�+j�����ӓ �4�D�c�0k�K��F�c/���2��ە��#�=>�|�G��.ږ%	�W/�S��=ۗ��<�Y�#w�������<ؘ1�2G�/z�4��=ߙ*�9H�5��5��3�"�-8�'f�<��1˛1��/�'I�$q�&��C��>�0@�Eq�+��-�%�)7�a�t�����)˞O��E�l]�'ʟ��+-�Y�s�����>��#�$�(;�,d�H��ڡG��#B�Jf���-��'�?�EW�(��Gƣ�J�Xf�0��.�
�C-�Dq�2��0�3�?N� ��:��0�O�=k�C��C��K1�V}�CԨF�A_�P��4�B'�Dj�/��QߪS1�*��7��%� �L/�-|�}��((�DQ�F��Kݭp)�P���$�� �=�*L�-w����2_���m����+��)ر3�&6�H]����:0�Ak�0��H޳6'�@^�\��5��2�
C�xQ�;ʵ��P&�2w���ʶ(� �(3�-\�(����X3� ��#�� Ѹ�2�-4�Db�)��ѹ���%�B�_�Xw�Oк: �[�v���
��G��� 
+�J+�Dv����׼
+�������38�Ol�)��)�*�;�#L�9p�-��Bؿ2�N�m�+��?����"�\:�H��%���7�5N���(��4����L�.^�8��%����X�aa�]��:!�Q\�%��7��*�7�6W�4��a���%�B��V��+F�Wr�E��I�Z�#z�H����8��.5�Md�4��I��,1�!^�������7��A��d=�h��6�B�)Q�N{�:���
 �.�+@�:l�>������-��1'�Y�b�!z���������8��*8�=c�%��%��-���6-�&d���A��S��V5�D��9���'�K>���!��=��'��_�~���0����8�� �.;�:j�������'��C��F?�)��f��-�?E�P��6��4
�HB���9��H��)-�rW�.��+��)%�O�of�D��?�:[�(��.��O��G>�X��O��b/�"��3��8��)"�/L�1|�G��N��E�(d�D��4���=$�b�)��#��<��+
�.9�7h���������!�+"�2N�'��5��7��4�1L�/~�A��O��+@�7l���P��=�;E���"����6��.�-G�.u�7��?��O�7l�0��A��@�#X�$|���-��7��4 �5U�d��/��I �(j�+��'��'��9�'I�4q�C��2��3�?Q�3��"��&���*/�EZ�P��/��X!�1z�E��'��(�$C�.h�3������&��B"�&e�1��"����@��==�4{�+��<��(�6B�5y���=��<	�3F�z���&�� ��.��&*�Q�j���4��-���+!�"M�>p�(��%��g��Nf�U���E)�>o�9��<��8%�^�L}�
+��@��#�&:�$a���������!��
+���[�ox�E��,.�"[�c~����Cw�9�Q�/�Jf�9�$2�Pl2�]�:Dd(�O�v�#���Wy����>��
+F���b�o��~���^�H������}{����0p�Alg�7�kY9�B�f�
+\�.Mo(z�%�
[�-��:Y��E�p@�4���9!"����3'i�����gim�����5���r�~��&;�7rj�D�vW,z[;�N�kp&���K��3����2����	"�f����<����[�������H���Ec!}�tqv��n?�]F�����`W��H��.Z�8��t� q~�s�O�d�"���q�tfl�.,g���5N���m>��n��X��������zb�t�G�
+��������1�x�$���������O3`R��������_�SX2���������?�UMh��[x���	QD��^�P������{�6�C#<�%eI��LF6����E7�;�h��/Z���1luI��!%b�jy���I�0/:�������"	��LO�13�j�T�'��GZ=� _%��w�^VCF�S�_��p��s�-�G�������:-g�R��'L*��i
mr;e����4,s��(���	��wHU��=��c#6�)��������X�1u�+��a��|S4z���#�Z���/�N������nM�u�}�.�>�axr���0{�s=Sh����GB����J�&��������B��Y����C�@����V�R�5$K���4V�`����U�T����bK
+`��(E��� �y���oL�ox!��n���=k>��@d����Qu&��
�?��*v���_�P�5U��mT���A��
�A����aj��8�\kN�a�id�I�*�}�A<�����?����e|)M�����c�)�c<��|~�����{�e]��|+Wh8@�R)]��T���B6�P����-�y�VJ��*�0Y���' J+^$�������Q�����q�X����\8��+K\7w��,D���
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s suggests %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one <archname> argument--%s takes one <pkgname> argument--%s takes one <trigname> argument--%s takes one <version> argument--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not chroot into maintainer script environmentDo not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenValidatable things: pkgname, archname, trigname, version.
+
+VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchitecture name '%s' is invalid: %sarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' is not a regular filearchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurebuilding an unknown package in '%s'.building package '%s' in '%s'.can't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot access archive '%s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open directory '%s'cannot open security status notification channelcannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set primary group ID to rootcannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot stat pathname '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file '%s' for package '%s' is missing valuecontrol file '%s' for package '%s' is missing value separatorcontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is emptyepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while cleaning uperror while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentfound unknown packages; this might mean the available database
+is outdated, and needs to be updated through a frontend method;
+please see the FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>generated corrupt ar header for '%s'group '%s' does not existheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal errorinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no 'control' file in control archive!no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete compression type '%s'; use xz insteadobsolete compression type '%s'; use xz or gzip insteadobsolete force/refuse option '%s'obsolete option '--%s'old conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoutside error context, abortingoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package architecture is missing or emptypackage contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name '%s' is invalid: %spackage name has characters that aren't lowercase alphanums or '-+.'package not in status nor available database at line %d: %.250spackage signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerevision number is emptyrm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filesyntax error in triggers deferred file '%.250s' at line %d character %zd '%s'takes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo many nested errors during error recoverytoo-long line or missing newline in '%.250s'treewalk root %s is not a directorytrigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name '%s' is invalid: %strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to parse timestamp '%.255s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunrecoverable fatal error, abortingunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion '%s' has bad syntax: %sversion number does not start with digitversion number is emptyversion string has embedded spacesversion string is emptyversioned Provideswait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2017-05-06 12:49+0200
+Last-Translator: Miroslav Kure <kurem@debian.cz>
+Language-Team: Czech <debian-l10n-czech@lists.debian.org>
+Language: cs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=3; plural=n==1 ? 0 : n>=2 && n<=4 ? 1 : 2;
+
+ nevyřízené spouštěče, které se nemusí podařit zpracovat:
+
+Konfigurační soubor „%s“ na tomto systému neexistuje.
+Podle vašeho požadavku se instaluje nový.
+
+Ladicí volby se dají kombinovat pomocí bitového nebo.
+Poznamenejme, že hodnoty a jejich význam se může měnit.
+
+K instalaci a odstranění balíků použijte buď „dpkg“, nebo pro
+přívětivější správu balíků „apt“ či „aptitude“. Balíky rozbalené
+pomocí „dpkg-deb --extract“ nebudou správně nainstalované!
+
+VAROVÁNÍ - použití voleb označených [!] může vážně poškodit instalaci.
+Implicitně zapnuté donucovací volby jsou označeny [*].
+     Nezměněn od doby instalace.
+     Verze v balíku je stejná jako poslední nainstalovaná.
+     není prostý soubor        %.255s
+   Co s tím chcete udělat ? Možné volby jsou:
+    Y nebo I : nainstalovat verzi z balíku
+    N nebo O : ponechat současnou verzi
+        D    : zobrazit rozdíl mezi verzemi
+        Z    : spustit shell a prozkoumat situaci
+  %.250s (verze %.250s) je přítomný a %s.
+  %.250s (verze %.250s) bude nainstalován.
+  %.250s je %s.
+  %.250s je nainstalován, ale je verze %.250s.
+ %250s není nainstalován.
+  %.250s bude dekonfigurován.
+  %.250s bude nainstalován, ale je verze %.250s.
+  %.250s bude odstraněn.
+  %.250s je rozbalen, ale ještě nebyl zkonfigurován.
+  %.250s je rozbalen, ale je verze %.250s.
+  %.250s poslední zkonfigurovaná verze je %.250s.
+  %.250s poskytuje %.250s a je přítomný a %s.
+  %.250s poskytuje %.250s a bude nainstalován.
+  %.250s poskytuje %.250s, ale je %s.
+  %.250s poskytuje %.250s, ale bude dekonfigurován.
+  %.250s poskytuje %.250s, ale bude odstraněn.
+  %s (%s) poskytuje %s.
+  -?, --help                       zobrazí tuto nápovědu
+      --version                    zobrazí verzi
+
+  Balík %s očekává zpracování spouštěčů.
+  Balík %s zatím není zkonfigurován.
+  Balík %s není nainstalován.
+  Balík %s bude odstraněn.
+  Balík %s poskytující %s očekává zpracování spouštěčů.
+  Balík %s poskytující %s zatím není zkonfigurován.
+  Balík %s poskytující %s není nainstalován.
+  Balík %s poskytující %s bude odstraněn.
+  Verze %s v systému je %s.
+  Verze %s v systému, poskytovaná %s, je %s.
+  Verze %s pro konfiguraci je %s.
+  odkaz %s je %s  odkazovaná nejlepší verze je %s  odkazovaná nejlepší verze není k dispozici  odkaz momentálně chybí  odkaz momentálně ukazuje na %s  závislost %s je %s  závislost %s: %s %7jd bajtů, %5d řádků   %c  %-20.127s %.127s
+ %d v %s:  %d balík z následující sekce: %d balíky z následujících sekcí: %d balíků z následujících sekcí: %s (%jd bajtů)
+ %s (%s) porušuje %s a je %s.
+ %s (není obyčejným souborem)
+ ==> Od doby instalace byl smazán (vámi nebo skriptem).
+ ==> Soubor v systému byl vytvořen vámi nebo skriptem.
+ ==> Tento soubor se také nachází v balíku.
+ ==> Ponechávám starý konfigurační soubor jako výchozí.
+ ==> Od doby instalace byl změněn (vámi nebo skriptem).
+ ==> Distributor poskytl upravenou verzi.
+ ==> Používám starý soubor podle přání.
+ ==> Používám nový konfigurační soubor jako výchozí.
+ ==> Používám nový soubor podle přání.
+ Části balíku %s:  Výchozí akcí je instalace nové verze.
+ Výchozí akcí je ponechání současné verze.
+ a  závisí na %d očekávaný program nebyl v PATH nalezen nebo není spustitelný
+%s%d očekávané programy nebyly v PATH nalezeny nebo nejsou spustitelné
+%s%d očekávaných programů nebylo v PATH nalezeno nebo nejsou spustitelné
+%snyní je nainstalován %d soubor nebo adresář.)
+nyní jsou nainstalovány %d soubory a adresáře.)
+nyní je nainstalováno %d souborů a adresářů.)
+%d vyžadovaná řídící část chybí%d vyžadované řídící části chybí%d vyžadovaných řídících částí chybí%s (podproces): %s
+%s - priorita %d%s porušuje %s%s je v konfliktu s %s%s porušeno: %sladicí volba %s, --debug=<oktal> nebo -D<oktal>:
+
+ Číslo   Ref. ve zdroji   Popis
+%s závisí na %s%s rozšiřuje %s%s donucovací volby - usměrňují chování při výskytu problémů:
+  varuje ale pokračuje:  --force-<něco>,<něco>,…
+  zastaví s chybou:      --refuse-<něco>,<něco>,… | --no-force-<něco>,…
+ Donucovací <něco>:
+balík %s není správně nainstalován; ignoruji všechny závislosti na něm%s před-závisí na %s%s doporučuje %s%s navrhuje %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Verze formátu části:            %d.%d
+    Část balíku:                    %s
+      ... verze:                    %s
+      ... architektura:             %s
+      ... MD5 součet:               %s
+      ... délka:                    %jd bajtů
+      ... děleno každých:           %jd bajtů
+    Číslo části:                    %d/%d
+    Délka části:                    %jd bajtů
+    Offset části:                   %jd bajtů
+    Velikost části (použitá část):  %jd bajtů
+
+%s: konfigurační soubor „%.250s“ není souborem ani symbolickým odkazem (= „%s“)%s: konfigurační soubor „%.250s“ odkazuje na neplatné jméno
+ („%s“ je symbolický odkaz na „%s“)%s: konfigurační soubor „%s“ je cyklickým odkazem
+ (= „%s“)%s: problém se závislostmi, ale přesto se konfiguruje dle požadavku:
+%s%s: problém se závislostmi, nicméně zpracovávám spouštěče dle požadavku:
+%s%s: problém se závislostmi, nicméně bude odstraněn dle požadavku:
+%s%s: chyba navázání vstupu na proud bzipu2%s: chyba navázání vstupu na proud gzipu%s: chyba navázání výstupu na proud bzipu2%s: chyba navázání výstupu na proud gzipu%s: nepodařilo se vytvořit odkaz „%.250s“ na „%.250s“: %s%s: nepodařilo se odstranit „%.250s“ (před přepsáním): %s%s: nepodařilo se odstranit „%.250s“: %s%s: nepodařilo se odstranit záložní kopii „%.250s“: %s%s: nepodařilo se odstranit starou distribuční verzi „%.250s“: %s%s: nepodařilo se přejmenovat „%.250s“ na „%.250s“: %s%s: vnitřní chyba bzipu2 při čtení%s: vnitřní chyba bzipu2 při čtení: „%s“%s: vnitřní chyba bzipu2 při zápisu%s: vnitřní chyba bzipu2 při zápisu: „%s“%s: vnitřní chyba gzipu při čtení%s: vnitřní chyba gzipu při čtení: „%s“%s: vnitřní chyba gzipu při zápisu%s: vnitřní chyba gzipu při zápisu: %s%s: vnitřní chyba gzipu při zápisu: „%s“%s: chyba lzma při zavírání%s: chyba lzma: %s%s: chyba lzma při čtení%s: chyba lzma při zápisu%s: chyba kopírování: %s%s: nelze otevřít %s pro hash: %s%s: nelze provést readlink na konfiguračním souboru „%s“
+ (= „%s“): %s%s: nelze zjistit stav konfiguračního souboru „%s“
+ (= „%s“): %s„%.255s“ neobsahuje řídící část „%.255s“„%s“ koliduje s „%s“„%s“ obsahuje uživatelem definovanou hodnotu Priority „%s“„%s“ musí být zadán bez argumentupole „%s“ obsahuje neplatné jméno balíku „%.255s“: %spoložka „%s“, chybí jméno architektury, nebo je na jejím místě smetív poli „%s“ chybí jméno balíku, nebo místo něj obsahuje nesmyslpoložka „%s“, odkaz na „%.255s“:
+ „%c“ je zastaralé, místo toho použijte „%c=“ nebo „%c%c“položka „%s“, odkaz na „%.255s“:
+ chybný vztah mezi verzemi %c%cpoložka „%s“, odkaz na „%.255s“:
+ implicitní shoda s konkrétním číslem verze, možná použít „=“položka „%s“, odkaz na „%.255s“:
+ číslo verze nezačíná alfanumerickým znakem, možná přidat mezerupoložka „%s“, odkaz na „%.255s“: neplatné jméno architektury „%.255s“: %spoložka „%s“, odkaz na „%.255s“: neurčitelná verzepoložka „%s“, syntaktická chyba po referenci na balík „%.255s“„%s“ vyžaduje hodnotu„%s“ nenalezen v PATH nebo není spustitelný(Poznamenávám zmizení balíku %s, který byl úplně nahrazen.)
+(Načítá se databáze … (popis není k dispozici)(celkem %jd bajtů)
+, core dumpedpřepínač -%c musí být zadán bez argumentupřepínač -%c vyžaduje argument--%s --pending nemá žádný volitelný argument--%s --recursive vyžaduje alespoň jednu cestu--%s (zatím) nepodporuje čtení .deb ze standarního vstupu--%s vyžaduje jméno .deb souboru a adresář--%s vyžaduje <jméno>--%s vyžaduje <jméno> <cesta>--%s vyžaduje jméno .deb souboru--%s vyžaduje jako argument <adresář>--%s vyžaduje argument <soubor>--%s vyžaduje jeden argument--%s vyžaduje cílový adresář.
+Nechtěli jste použít dpkg --install ?--%s vyžaduje platné jméno balíku, což „%.250s“ není: %s--%s vyžaduje jako argument alespoň jeden soubor s balíkem--%s vyžaduje alespoň jedno jméno balíku--%s vyžaduje čtyři argumentypřepínač --%s musí být zadán bez argumentupřepínač --%s vyžaduje argument--%s vyžaduje kladný oktalový parametr--%s vyžaduje jedno nebo více jmen částí souboru--%s akceptuje nejvýše jedno jméno souboru Packages--%s vyžaduje nejvýše dva parametry--%s vyžaduje nejvýše dva parametry (.deb a adresář)--%s vyžaduje právě jeden parametr--%s vyžaduje právě dva parametry--%s musí být zadán bez argumentu--%s vyžaduje jedno jméno architektury--%s vyžaduje jedno jméno balíku--%s vyžaduje jeden název spouštěče--%s akceptuje jeden argument <verze>--%s vyžaduje jedno jméno balíku--%s vyžaduje jen jeden parametr (jméno .deb souboru)--%s použita se zastaralým relačním operátorem „%s“--auto vyžaduje jméno právě jednoho souboru--auto vyžaduje použití přepínače --output--compare-versions špatná relace--compare-versions vyžaduje tři parametry: <verze> <vztah> <verze>--search vyžaduje alespoň jednu souborovou masku--split vyžaduje jméno souboru--split vyžaduje nejvýše jméno souboru a začátek cílové cestybylo zadáno --update, ale %s neexistujepro --remove je --update zbytečné… vypadá to, že se vše povedlo…/%s; avšak:
+<komprese> z tar -cf<deb> je jméno debianího archivu.
+<csoubor> je jméno řídícího souboru.
+<cpoložka> je název položky v hlavním souboru „control“.
+
+<dekomprese><dpkg-deb --info roura><odkaz> a <cesta> nemohou být stejné<odkaz> je odkaz je odkaz ukazující na %s/<jméno>.
+  (např. /usr/bin/pager)
+<jméno> je hlavní jméno pro tuto skupinu odkazů.
+  (např. pager)
+<cesta> je umístění jednoho z cílových souborů.
+  (např. /usr/bin/less)
+<priorita> je celé číslo; v automatickém režimu jsou vybírány volby
+  s vyššími čísly.
+
+<popisovač souboru stavu balíku a ukazatele postupu><chybový výstup><standardní vstup><standardní výstup>Přidává se „%s“
+umožní instalaci konfliktních balíkůAlternativa %s nebyla změněna, protože volba %s není dostupná.vždy nainstaluje chybějící konfigurační souboryvždy bez dotazu použije nový konfigurační souborvždy bez dotazu použije starý konfigurační souborJiný proces si zamknul databázi pro zápis a možná ji právě mění.
+Některé z následujících problémů mohou být způsobeny právě tímto.
+ArchitekturaOvěřuje se pravost %s …
+Příkazy:
+  --add <vlastník> <skupina> <režim> <cesta>
+                           přidá do databáze novou <cestu>
+  --remove <cesta>         odstraní <cestu> z databáze
+  --list [<vzor-glob>]     vypíše aktuální seznam přepsaných souborů
+
+Příkazy:
+  --check-supported           zkontroluje, zda dpkg podporuje spouštěče
+
+Příkazy:
+  --install <odkaz> <jméno> <cesta> <priorita>
+    [--slave <odkaz> <jméno> <cesta>] …
+                           přidá do systému skupinu alternativ
+  --remove <jméno> <cesta> ze skupiny alternativ <jméno> odstraní <cestu>
+  --remove-all <jméno>     odstraní skupinu <jméno> ze systému alternativ
+  --auto <jméno>           přepne odkaz <jméno> do automatického režimu
+  --display <jméno>        zobrazí informace o skupině <jméno>
+  --query <jméno>          strojově zpracovatelná verze --display <jméno>
+  --list <jméno>           zobrazí všechny cíle skupiny <jméno>
+  --get-selections         vypíše jména skupin a jejich stav
+  --set-selections         ze standardního vstupu načte alternativní stavy
+  --config <jméno>         zobrazí alternativy skupiny <jméno> a požádá
+                             uživatele o výběr té, která se má použít
+  --set <jméno> <cesta>    nastaví <cestu> jako alternativu pro <jméno>
+  --all                    zavolá --config na všechny alternativy
+
+Příkazy:
+  -s|--split <soubor> [<prefix>]  rozdělí archiv
+  -j|--join <část> <část> …       spojí části dohromady
+  -I|--info <část> …              vypíše informaci o části
+  -a|--auto -o <celek> <část>     automaticky spojí části
+  -l|--listq                      vypíše nehodící se části
+  -d|--discard [<soubor> …]       ignoruje nehodící se části
+
+Příkazy:
+  [--add] <soubor>         přidá odklonění
+  --remove <soubor>        odstraní odklonění
+  --list [<vzor-glob>]     zobrazí odklonění souboru
+  --listpackage <soubor>   zobrazí balík, který odklonil soubor
+  --truename <soubor>      vrátí odkloněný soubor
+
+Operátory porovnání pro --compare-versions jsou:
+ lt le eq ne ge gt        (neexistenci verze považuje za starší než cokoli);
+ lt-nl le-nl ge-nl gt-nl  (neexistenci verze považuje za novější než cokoli);
+ < << <= = >= >> >        (pro kompatibilitu se syntaxí souboru control).
+
+Konfigurační soubor „%s“
+Konfigurační soubor „%s“ (ve skutečnosti „%s“)
+nakonfiguruje všechny balíky, které mohou pomoci tomuto balíkuDekonfiguruje se %s (%s) …
+Dekonfiguruje se %s (%s), aby mohl být odstraněn %s (%s) …
+Debian „%s“ - nástroj pro dotazování se na balíky verze %s.
+Debian %s - nástroj pro práci se spouštěmi verze %s.
+Debian %s verze %s.
+Debian „%s“ - backend pro práci s archivy verze %s.
+Debian „%s“ - program pro správu balíků verze %s.
+Debian „%s“ - nástroj na dělení/slučování balíků; verze %s.
+Smazán %s.
+závislosti a konfliktyPopisPožadované=Neznámé/Instalovat/Odinstalovat/Vyčistit/Podržet
+| Stav=Ne/Instalován/Konfigurační soubory/Rozbalen/Nezkonfigurován/Nekompletní
+| instalace/Očekávané spouštěče/Nevyřízené spouštěče
+|/ Chyba?=(nic)/Nutná přeinstalace (Stav,Chyba: velké písmeno=chyba)
+nepřejde do speciálního chrootupři rozbalování nepoužije bezpečné V/V operacePři zpracování nastaly chyby:
+Návratový kód:
+  0 = ok
+  1 = s --auto, soubor není součástí
+  2 = problémy
+Soubor „%.250s“ není částí rozděleného archivu.
+Formát:
+  Formát je řetězec, který bude vytištěn pro každý balík. Formát může
+  obsahovat standardní escape sekvence \n (nový řádek), \r (návrat
+  vozíku) nebo \\ (lomítko). Informace o balíku můžete zahrnout pomocí
+  odkazů na různá pole balíku dle vzoru ${proměnná[;šířka]}.
+  Pole budou zarovnaná napravo, záporná šířka je zarovná vlevo.
+obecně užitečné informace o průběhuIgnoruje se požadavek na odstranění sdíleného odklonění „%s“.
+Ignoruje se požadavek na přejmenování souboru „%s“ vlastněného odkláněným balíkem „%s“
+Byly aktualizovány informace o %d balíku.
+Byly aktualizovány informace o %d balících.
+Byly aktualizovány informace o %d balících.
+neskutečná kvanta žvaněnínainstaluje balík, i když selže kontrola autenticityinstaluje, i když tím poruší jiný balíkInstaluje se nová verze konfiguračního souboru %s …
+vyvolání a stav konfiguračních skriptůPřebytečné soubory ponechány v odkladišti:
+Ponechávám „%s“
+spousty výstupu ohledně závislostí/konfliktůspousta žvanění o např. adresáři dpkg/infospousty výstupu pro každý konfigurační souborspousty výstupu pro každý zpracovaný souborspousty výstupu ohledně spouštěčůMS-DOS konec souboru (^Z) v položce „%.*s“položka „%.*s“ obsahuje MSDOS konec souboru (^Z) (chybí nový řádek?)V tomto běhu bylo rozbaleno více kopií balíku %s !
+ Konfiguruje se pouze jedenkrát.
+NázevOdklonění „%s“ neexistuje, tedy nebylo odstraněno
+Pozn: PATH uživatele root by měla obsahovat /usr/local/sbin, /usr/sbin a /sbinNic k nastavení.nabídne nahrazení i konfig. souborů bez nové verzeVolby:
+  --admindir=<adresář>        místo %s použije <adresář>
+  --by-package=<balík>        změní, který balík čeká na spouštěč
+                              (normálně to dpkg nastavuje automaticky)
+  --await                     balík vyžaduje počkat na zpracování
+  --no-await                  žádný balík nevyžaduje počkat na zpracování
+  --no-act                    pouze testuje, nic nemění
+
+Volby:
+  --depotdir <adresář>            místo %s/%s použije <adresář>
+  -S|--partsize <velikost>        v kiB, pro -s, výchozí je 450)
+  -o|--output <soubor>            Jméno souboru pro -j, výchozí je
+                                    <balík>-<verze>.deb
+  -Q|--npquiet                    nestěžuje si pokud -a není částí
+  --msdos                         generuje jména konvence 8.3
+
+výstup každého konfiguračního souboruvýstup každého zpracovaného souborupřepíše odkloněný soubor neodkloněnou verzípřepíše soubory patřící jinému balíkupřepíše adresář balíku souborem z jiného balíkuv PATH chybí důležité programy, očekávejte potížePATH není nastavena.Balík %s je ve stavu hold, ponechávám. K vynucení použijte --force-hold.
+Balík %s byl zadán vícekrát, zpracovává se pouze jednou.
+Balík „%s“ neobsahuje žádné soubory (!)
+Dosud nesestavené balíky:
+Část %d balíku %s naplněna (ještě potřebuji Cestapole Pre-DependsPřipravuje se nahrazení %s …
+Pro aktuální možnost[*] stiskněte <enter>, jinak zadejte číslo: Prioritazpracuje i balík s chybnou nebo žádnou architekturouzpracuje i balíky s chybnou verzíZpracovávají se spouštěče pro balík %s (%s) …
+Zpracování zastaveno, protože došlo k příliš mnoha chybám.
+Odstraňují se konfigurační soubory balíku %s (%s) …
+Sestavuji balík %s z %d části: Sestavuji balík %s z %d částí: Sestavuji balík %s z %d částí: Zaznamenány informace o %s z %s.
+odstraní nezbytný balíkodstraní balíky vyžadující instalaciOdstraňuje se balík %s (%s) …
+Odstraňuje se „%s“
+nahradí balík nižší verzíNahrazen soubory v nainstalovaném balíku %s (%s) …
+Nahrazují se informace o dostupných balících z %s.
+Nahrazují se soubory ve starém balíku %s (%s) …
+Vybírá se dosud nevybraný balík %s.
+Výběrnastaví všechny donucovací volbyNastavuje se balík %s (%s) …
+neskutečně mnoho výstupu ohledně spouštěčůPřeskočení neplatného řádku: %sPřeskočení neznámé alternativy %s.Přeskakuje se nevybraný balík %s.
+Rozděluji balík %s na %d část: Rozděluji balík %s na %d části: Rozděluji balík %s na %d částí: StavNásledující balíky očekávají zpracování spouštěčů, které aktivovali
+v ostatních balících. Toto zpracování lze vyžádat pomocí dselectu
+nebo příkazem dpkg --configure --pending (resp. dpkg --triggers-only):
+Následující balíky se během instalace dostaly do problémů. Aby tyto balíky
+(a všechny na nich závislé) pracovaly správně, musí být přeinstalovány:
+Následujícím balíkům chybí v databázi řídící soubor „.list“
+a musí být přeinstalovány:
+Následujícím balíkům chybí v databázi řídící soubor „.md5sums“
+a musí být přeinstalovány:
+Následující balíky jsou částečně nakonfigurovány, pravděpodobně díky tomu,
+že je balík konfigurován poprvé. Konfigurace by měla být opakována použitím
+dpkg --configure <balík> nebo položkou konfigurace v programu dselect:
+Následující balíky jsou instalovány pouze částečně, díky problémům při
+instalaci. Pravděpodobně může být instalace dokončena jejím opakováním;
+balíky mohou být odstraněny pomocí programu dselect nebo dpkg --remove:
+Následující balíky nemají architekturu:
+Následující balíky používají neplatnou architekturu:
+Následující balíky používají neznámou cizí architekturu, což způsobí
+problémy s různými nadstavbami balíčkovacího systému. Můžete to opravit
+zaregistrováním této cizí architektury příkazem dpkg --add-architecture:
+Následující balíky chtějí zpracovat aktivované spouštěče, ale ke
+zpracování zatím nedošlo. Toto zpracování lze vyžádat pomocí dselectu
+nebo příkazem dpkg --configure --pending (resp. dpkg --triggers-only):
+Následující balíky byly rozbaleny, ale ještě nebyly zkonfigurovány.
+Tyto balíky musí být zkonfigurovány použitím dpkg --configure nebo vybráním
+položky konfigurace v menu dselectu:
+Existuje %d možnost pro alternativu %s (poskytující %s).Existují %d možnosti pro alternativu %s (poskytující %s).Existuje %d možností pro alternativu %s (poskytující %s).Neexistuje program poskytující %s.Ve skupině odkazů %s (poskytující %s) je jen jedna alternativa: %sToto je svobodný software; podrobnosti o podmínkách kopírování naleznete
+v Obecné veřejné licenci GNU (GNU General Public Licence) verze 2 nebo
+pozdější. Toto programové vybavení je absolutně bez záruky.
+aktivace a zpracování spouštěčůzkusí (od|na)instalovat balík, i když není rootpřevede všechny problémy se závislostmi na varovánípřevede problémy se závislostmi na verzi na varováníPo skončení napište „exit“.
+Napište dpkg --help k získání nápovědy o instalaci a odinstalaci balíků [*];
+Pro uživatelsky přívětivou správu balíků použijte „apt“ nebo „aptitude“;
+Napište dpkg -Dhelp pro seznam ladících příznaků dpkg;
+Napište dpkg --force-help k získání seznamu vynucovacích přepínačů;
+Napište dpkg-deb --help k získání nápovědy o zacházení se soubory *.deb;
+
+Volby označené [*] produkují obsáhlý výstup - použijte „less“ nebo „more“!Napište dpkg-deb --help k získání nápovědy k manipulaci s *.deb soubory;
+Napište dpkg --help k získání informací o instalování a odinstalování balíků.Pro zobrazení nápovědy napište dpkg-split --help.Pro zobrazení nápovědy napište dpkg-trigger --help.Rozbaluje se %s (%s) …
+Rozbaluje se %s (%s) přes (%s) …
+Aktualizují se informace o dostupných balících z %s.
+Použití: %s [<volba> …] <příkaz>
+
+Pro nápovědu o používání programu použijte „%s --help“.Pro uživatelsky přívětivou správu balíků použijte „apt“ nebo „aptitude“.
+Pro nápovědu o odklánění souborů použijte --help.Pro nápovědu o přepisování metadat souborů použijte --help.Pro nápovědu o dotazování se na balíky použijte --help.Na archivy použijte dpkg -b, --build, -c, --contents, -e, --control,
+  -I, --info, -f, --field,  -x, --extract, -X, --vextract,
+  --fsys-tarfile  (napište %s --help).
+
+pokud existuje, použije pro nové konfigurační
+soubory výchozí volbu a neptá se. Pokud žádná
+výchozí volba neexistuje, budete dotázáni, ale
+pouze pokud nebyly zadány přepínače confold nebo
+confnewOvěřitelné věci: pkgname, archname, trigname, version.
+
+VerzeVerze dpkg s funkční podporou pro %s ještě není zkonfigurována.
+ Použijte prosím „dpkg --configure dpkg“ a potom zopakujte
+ tento příkaz.
+U přidání je výchozí --local a --divert <original>.distrib.
+Při odstranění musí odpovídat --package nebo --local a --divert
+(jsou-li použity).
+Před/poinstalační skripty balíku by měly vždy používat --package a --divert.
+Teoreticky by se odstranil nebo vyčistil balík %s (%s)…
+[předvoleno=N][předvoleno=Y][bez předvolby]aby dpkg pracovalo správně, musí se admindir nacházet uvnitř instdirtaké se konfiguruje „%s“ (vyžadováno balíkem „%s“)alternativa %s (součást skupiny odkazů %s) neexistuje; odebírám ze seznamu alternativ.alternativa %s nemůže být hlavní: je závislostí %salternativa %s nemůže být závislost %s: jde o hlavní alternativualternativa %s nemůže být závislost %s: je závislostí %salternativa %s pro %s není registrována, neodstraňujialternativa %s pro %s není registrována, nenastavujialternativní odkaz %s je již spravován pomocí %salternativní odkaz %s je již spravován pomocí %s (závislost %s)alternativní odkaz není absolutní, jak by měl být: %sjméno alternativy (%s) nesmí obsahovat „/“ a mezeryalternativní cesta není absolutní, jak by měla být: %svíceznačné jméno balíku „%s“ s vícero instalovanými instancemipřepsání „%s“ již existuje, ale kvůli --force jej budeme ignorovatpřepsání „%s“ již existuje, přerušuji.libovolné odklonění %slibovolné odklonění %s do %sjméno ar části „%s“ je příliš dlouhédélka „%jd“ ar části je příliš velká<prázdná><žádná><neznámá>architektura „%s“ není povolená: %sarchitektura „%s“ je rezervovaná a nelze přidatjméno architektury „%s“ není platné: %sarchiv „%.250s“ obsahuje dvě řídící části, vzdávám toarchiv „%s“ obsahuje předčasnou část „%.*s“ před „%s“, vzdávám toarchiv „%s“ není obyčejný souborarchiv „%s“ používá neznámou kompresi pro část „%.*s“, vzdávám toarchiv obsahoval objekt „%.255s“ neznámého typu 0x%xvelikost řídící části archivuarchiv používá neplatný formát verze: %sarchiv má chybně formátovanou délku řídící části „%s“archiv v hlavičce neobsahuje nové řádkyhlavička části archivuarchiv používá formát verze %d.%d, nainstalujte novější dpkg-debmagické číslo verze archivuhlavička části archivučísla částí archivuoffset části archivučíslo části archivucelková velikost archivuautomatický režimautomatické aktualizace %s/%s jsou zakázány, ponechávám bez změnočekává zpracování spouštěče jiným balíkemprázdný řádek v hodnotě položky „%.*s“porušený kvůli chybnému odstranění nebo instalaciporušený kvůli chybě v postinstvytvářím neznámý balík v „%s“.vytvářím balík „%s“ v „%s“.nelze instalovat neznámou volbu %snefunguje volání mmap na info soubor „%.255s“nelze odstranit starý postrm skriptnefunguje volání fstat na info soubor „%.255s“nelze přistoupit k archivu „%s“nelze připojit soubor „%s“ do aru „%s“: %snelze připojit část „%s“ rozděleného balíku k „%s“: %snelze připojit k „%s“nelze zavřít dekompresní rourunelze spočítat MD5 součet souboru „%s“: %snelze spočítat MD5 součet tar archivu „%.255s“: %snelze převést vícebajtovou sekvenci „%s“ na široký znaknelze převést vícebajtový řetězec „%s“ na širokoznakový řetězecnelze zkopírovat „%s“ do archivu „%s“: %snelze zkopírovat „%s“ na „%s“: %snelze zkopírovat část archivu z „%s“ do dekompresní roury: %snelze zkopírovat rozbalená data „%.255s“ do „%.255s“: %snelze odklonit adresářnelze odklonit soubor „%s“ sám na sebenelze rozbalit control soubor „%s“ z „%s“: %snelze rozbalit část rozděleného balíku „%s“: %snelze získat přístup k bezpečnostnímu štítkovánínelze otevřít „%.255s“ (v „%.255s“)nelze otevřít část „%.250s“nelze otevřít adresář „%s“nelze otevřít notifikační kanál pro hlášení stavu bezpečnostinelze číst adresář konfiguračních souborů „%.250s“ (z „%.250s“)nelze přečíst adresář infonelze odstranit „%.250s“nelze odstranit aktuálně používanou architekturu „%s“nelze odstranit jinou než cizí architekturu „%s“nelze odstranit starý konfigurační soubor „%.250s“ (z „%.250s“)nelze odstranit starý konfigurační soubor „%.250s“ (= „%.250s“)nelze odstranit starý seznam souborůnelze přejmenovat „%s“ na „%s“nelze splnit před-závislosti pro %.250s (vyžadováno pro %.250s)nelze prohledat adresář „%.255s“nelze zjistit obsah adresáře s aktualizacemi „%.255s“netuším, jak splnit před-závislost:
+ %snelze nastavit ID primární skupiny na rootnelze nastavit bezpečnostní konext pro soubor „%s“nelze nastavit bezpečnostní kontext pro konfigurační skriptnelze přeskočit řídící část archivu z „%s“: %snelze přeskočit část archivu z „%s“: %snelze přeskočit soubor „%.255s“ (nahrazen nebo vyřazen?) z roury: %snelze přeskočit dorovnání souboru „%.255s“: %snelze přeskočit hlavičku rozděleného balíku „%s“: %snelze volat stat na „%.255s“ (v „%.255s“)nelze volat stat na soubor „%s“nelze volat stat na cestu „%s“nelze zrušit potenciální koncové nuly z dpkg-deb: %sznak „%c“ není povolen - povolena jsou pouze písmena, čísla a znaky „%s“komprimovaná data jsou porušenákomprimuje se tarkonfigurační soubor „%.250s“ nebyl v balíku nenalezenna konfiguračním souboru „%.250s“ nelze spustit stat()konfigurační soubor „%s“ není obyčejný souborzobrazovač rozdílů konfiguračních souborůkonfigurační soubor „%s“ má na konci bílé znakynázev konfiguračního souboru %s je duplicitníjméno konfiguračního souboru „%s“ je příliš dlouhé, nebo chybí koncová nová řádkashell konfiguračních souborůchyba konfigurace: %s:%d: %sodporující si akce -%c (--%s) a -%c (--%s)odsuny „%.250s“ a „%.250s“ v konfliktukonflikt balíků - nebudu instalovat %.250szvažuji dekonfiguraci balíku %s, který by byl porušen akcí „%s“…zvažuji dekonfiguraci nezbytného balíku
+ %s, což by umožnilo akci „%s“zvažuji odstranění %s ve prospěch %s …řídící adresář má špatná práva %03lo (musí být >=0755 a <=0775)řídící adresář není adresářemcontrol soubor „%s“ neexistujeřídící soubor „%s“ balíku „%s“ obsahuje prázdné jméno souboruřídící soubor „%s“ balíku „%s“ neobsahuje závěrečný nový řádekřídící soubor „%s“ balíku „%s“ neobsahuje hodnotuřídící soubor „%s“ balíku „%s“ neobsahuje oddělovač hodnotyřídící soubor obsahuje %cřídící částporušený info soubor „%s“ obsahující verzi formátunelze otevřít log „%s“: %snelze zjistit stav starého souboru „%.250s“, tudíž jej nemažu: %snelze otevřít „%i“ pro proudsoučasná alternativa %s neexistuje, přepínám na %s pro skupinu odkazů %spři zpracování spouštěčů byl nalezen cyklus:
+ řetěz balíků, jejichž spouštěče mohou být zodpovědné:datová částproblém se závislostmi - nechávám spouštěče nezpracovanéproblém se závislostmi - nechávám nezkonfigurovanéproblém se závislostmi - neodinstalovávámnesplněné závislosti zamezily konfiguraci balíku %s:
+%sproblém se závislostmi zamezily zpracování spouštěčů pro %s:
+%sproblémy se závislostmi zabránily odstranění %s:
+%szahazuji zastaralý závislý odkaz %s (%s)odkloněno balíkem %s z: %s
+odkloněno balíkem %s do: %s
+odklonění %s balíkem %sodklonění %s do %s balíkem %skam-odklonit nemůže obsahovat znak nového řádkuodkloněno balíkem %s do: %s
+hotovo
+degraduji balík %.250s z verze %.250s na %.250sdpkg není uvedeno jako nainstalované, nelze zkontrolovat podporu pro %s!
+duplicitní balík v seznamu očekávaných spouštěčů „%.255s“duplicitní zajímavý souborový spouštěč pro jméno souboru „%.250s“ a balík „%.250s“duplicitní cesta %sduplicitní nevyřízený spouštěč „%.255s“duplicitní závislý odkaz %sduplicitní závislé jméno %szdvojená hodnota položky „%s“zdvojená hodnota uživatelem definované položky „%.*s“prázdný název polefgets vrátil při čtení konfiguračního souboru prázdný řetězecprázdné názvy spouštěčů nejsou povolenykonec souboru za položkou „%.*s“konec souboru před hodnotou v položce „%.*s“ (chybí závěrečný nový řádek)konec souboru při čtení položky „%.*s“ (chybí závěrečný nový řádek)konec souboru na stdin při otázce na konfigurační souboryepochepocha ve verzi je prázdnáepocha ve verzi je zápornáepocha ve verzi není čísloepocha ve verzi je příliš velkáchybachyba při kontrole „%s“chyba uzavření v %.250schyba při zavírání konfiguračního souboru „%.255s“chyba při uzavírání nebo zápisu „%.255s“chyba při vytváření spec. souboru „%.255s“chyba při vytváření adresáře „%.255s“chyba při vytváření pevného odkazu „%.255s“chyba při vytváření nového záložního souboru „%s“chyba při vytváření roury „%.255s“chyba při vytváření symbolického odkazu „%.255s“chyba při ověřování, že „%.250s“ neexistujechyba spouštění akce „%s“, návratový kód %dchyba formátování řetězce do proměnné varbufchyba ve formátu: %schyba při instalaci nového souboru „%s“chyba při otevření soubory conffileschyba při otevírání konfiguračního adresáře „%s“chyba při zpracovávání archivu %s (--%s):
+ %schyba při zpracovávání balíku %s (--%s):
+ %schyba při čtení %.250schyba při čtení %s ze souboru %.255schyba při čtení souboru conffileschyba při čtení z roury od dpkg-debchyba při čtení souboru s odloženými spouštěči „%.250s“chyba při odstranění starého záložního souboru „%s“chyba při nastavování vlastníka „%.255s“chyba při nastavování vlastníka symbolického odkazu „%.255s“chyba při nastavování práv „%.255s“chyba při nastavování času u „%.255s“chyba při pokusu o otevření %.250schyba při odblokování signálu %s: %s
+chyba při úkliduchyba při zápisu „%s“chyba při zápisu „%s“chyba při zápisu do „%s“chyba při zápisu do seznamu architekturchyba při zápisu na stderr, objeveno před otázkou na konfigurační souboryselhala alokace pamětinepodařilo se alokovat paměť pro novou položku v seznamu balíků, jejichž
+ instalace se nezdařila: %snelze změnit adresář na „%.255s“nelze vstoupit do adresářechroot na „%.250s“ selhalpo čtení zapomněl zavřít: „%.255s“nelze vytvořit adresářnelze vytvořit rourudup selhal pro fd %ddup selhal pro std%sselhalo volání fstat na souboru %s, který je součástí arna archivu selhalo volání fstat()nelze volat fstat na soubor s odsunynelze získat fstat souboru statoverrideselhalo vytvoření dočasného souboru (%s)selhalo otevření konfiguračního souboru „%.255s“ pro čtení: %snelze otevřít soubor s odsunynelze otevřít soubor „%.255s“ s informacemi o balíku pro čtenínelze otevřít soubor statoverridenelze otevřít soubor se seznamem zajímavých spouštěčů „%.250s“selhalo čteníselhalo čtení „%.255s“ (v „%.255s“)chyba při čtení archivu „%.255s“selhalo odstranění spojeného aktualizačního souboru %.255snepodařilo se odstranit svůj vlastní soubor s aktualizacemi %.255spřesun v dočasném souboru (%s) selhalselhalo přesunutí v souboru se zajímavými spouštěči „%.250s“selhal posunselhalo dereferencování stávajícího symbolického odkazu „%.250s“selhalo dereferencování nového cíle („%.250s“) symbolického odkazu „%.250s“selhalo volání stat na dočasném souboru (%s)selhalo smazání dočasného souboru (%s), %sselhal zápisselhalo zapsání %s záznamu o „%.50s“ do souboru „%.250s“selhalo zapsání podrobností o „%.50s“ do souboru „%.250s“selhal zápis jména souboru do roury s tarem (%s)fgets vrátil z „%.250s“ prázdný řetězecnázev pole „%.*s“ nemůže začínat pomlčkoujméno položky „%.*s“ musí být následováno dvojtečkoušířka položky je mimo rozsahsoubor „%.250s“ používá neplatný formát verze: %ssoubor „%.250s“ je poškozen - %.250s chybísoubor „%.250s“ je poškozen - špatný kontrolní součet MD5 „%.250s“soubor „%.250s“ je poškozen - špatná hlavička archivusoubor „%.250s“ je poškozen - špatné číslo části archivusoubor „%.250s“ je poškozen - chybná číslice (kód %d) v %ssoubor „%.250s“ je poškozen - špatná magie na konci první hlavičkysoubor „%.250s“ je poškozen - špatné magické číslo na konci druhé hlavičkysoubor „%.250s“ je poškozen - špatný počet částí archivusoubor „%.250s“ je poškozen - špatný výplňový znak (kód %d)soubor „%.250s“ je poškozen - chybí nový řádek za %.250ssoubor „%.250s“ je poškozen - chybí lomítko mezi čísly částí archivusoubor „%.250s“ je poškozen - nuly v sekci infosoubor „%.250s“ je poškozen - druhý člen není částí datsoubor „%.250s“ je poškozen - chybná velikost uvozené částisoubor „%.250s“ je poškozen - moc krátkýsoubor „%.250s“ je poškozen - chybný počet částí pro uvozené velikostisoubor „%.250s“ používá formát verze %d.%d; použijte novější dpkg-splitsoubor „%.250s“ není částí archivusoubor „%s“ je poškozen - číslo mimo rozsah v %ssoubor „%s“ není část archivu
+formát souboru nebyl rozpoznánsoubor vypadá jako archiv, který byl poškozen
+ stahováním v ASCII módusoubor nesmí obsahovat znaky nového řádkuzáznam souborového spouštěče obsahuje neplatné jméno balíku „%.250s“ (se zájmem na souboru „%.250s“): %.250snázev souboru „%s“ není absolutnísoubory „%.250s“ a „%.250s“ nejsou části stejného balíkuseznam souborů balíku „%.250s“ obsahuje prázdné jméno souboruseznam souborů balíku „%.250s“ neobsahuje závěrečný nový řádekseznam souborů balíku „%.250s“ chybí, předpokládám, že program nemá nainstalované žádné soubory.vynucuji přeinstalaci alternativy %s, protože skupina odkazů %s je porušenáfork selhalverze formátu následovaná smetímverze formátu neobsahuje tečkuverze formátuverze formátu s prázdnou hlavní pozicíverze formátu s prázdnou vedlejší pozicínalezeny neznámé balíky; to může znamenat, že je databáze
+dostupných balíků zastaralá a je nutné ji aktualizovat;
+více naleznete na <https://wiki.debian.org/Teams/Dpkg/FAQ>vygenerována porušená ar hlavička pro „%s“skupina „%s“ neexistujehlavička je příliš dlouhá; jméno balíku nebo číslo verze musí být
+příliš dlouhé; vzdávám to.ignoruji %d varování o řídících souborechignoruji %d varování o řídících souborechignoruji %d varování o řídících souborechignoruji porušení, zkouším pokračovat!ignoruji konflikt, zkouším pokračovat!ignoruji problém se závislostmi akce „%s“:
+%signoruji před-závislostní problém!ignoruje se požadavek na odstranění nenainstalovaného balíku %.250signoruje se požadavek na odstranění %.250s, v systému
+ zůstaly jen konfigurační soubory; pro jejich odstranění použijte --purgenepovolené jméno architektury v zadání „%s:%s“: %snedovolené jméno očekávajícího balíku „%.250s“: %.250snepovolené jméno balíku na řádku %d: %.250snepovolené jméno balíku v očekávaném spouštěči „%.255s“: %snepovolené jméno balíku v zadání „%s%s%s“: %snepovolené jméno nevyřízeného spouštěče „%.255s“: %sverze formátu info databáze (%d) je falešná nebo příliš nová; zkuste novější dpkginfo soubor %s/%s není přiřazen žádnému balíkuinstalace %.250snainstalováninstalace balíku %.250s by porušila balík %.250s a
+ dekonfigurace není povolena (mohlo by pomoci --auto-deconfigure)instalace balíku %.250s by porušila stávající softwarevnitřní chybavnitřní chybaneplatný znak „%c“ v archivu „%.250s“, ve velikosti části „%.16s“šířka položky obsahuje neplatný znak „%c“neplatný znak v číslu revizeneplatný znak v číslu verzeneplatná úroveň komprese pro -%c: %ldneplatné parametry komprese: %sneplatná verze formátu deb balíku: %sneplatné celé číslo pro -%c: „%.250s“neplatné číslo pro --%s: „%.250s“neplatná nebo neznámá syntaxe v názvu spouštěče „%.250s“ (v seznamu zajímavých spouštěčů balíku „%.250s“)neplatné jméno balíku „%.250s“ v souboru s odloženými spouštěči „%.250s“neplatné gid %s ve statoverrideneplatný režim %s ve statoverrideneplatné uid %s ve statoverrideneplatný stavneplatné jméno spouštěče „%.250s“: %.250sneukončený řádek při pokusu o čtení %spříliš dlouhý nebo neukončený řádek při pokusu o čtení %sodkaz %s je jak primární, tak závislýlokálně odkloněno z: %s
+lokální odklonění %slokální odklonění %s do %slokálně odkloněno do: %s
+lokálně odkloněno do: %s
+dlouhá jména souborůkonfigurační skript „%.50s“ má špatná práva %03lo (musí být >=0555 a <=0775)konfigurační skript „%.50s“ není obyčejný soubor ani symbolický odkazna konfigurační skript „%.50s“ se nedá zavolat statmalloc selhal (%zu bajtů)ruční režimhlavní souborhlavní odkazmožné problémy s odstraněním balíku %s, protože poskytuje %s …nesmí být prázdný řetězecdosažen limit použité pamětineshoda v kam-odklonit
+  při odstraňování „%s“
+  nalezeno „%s“neshoda v balíku
+  při odstraňování „%s“
+  nalezen „%s“chybí uzavírací závorkaje přítomno několik instancí balíku, z nichž některé mohou a jiné nemohou být nainstalovány současně; pravděpodobně kvůli přechodu z neoficiálního dpkgmulti-archvíce Conflicts a Replacesje přítomno vícero instancí balíku, které nemohou být nainstalovány současně; pravděpodobně kvůli přechodu z neoficiálního dpkgpro soubor „%.250s“ existuje více statoverridemusí být zavolán z konfiguračního skriptu (nebo s parametrem --by-package)musí začínat písmenem nebo číslicímusí začínat písmenem nebo číslicíjméno %s je jak primární, tak závislénutno zadat akcinový řádek v položce „%.*s“nový řádek není povolen v názvu objektu „%.255s“nový řádek není povolen v cestě „%s“nové řádky jsou v souborech update-alternatives zakázány (%s)v řídícím archivu chybí soubor „control“!pro %s neexistují alternativyžádné přepsání neexistuježádná informace o balíku v „%.255s“balík jména „%s“ není nainstalován, nelze zkonfigurovat%s nevyhovuje žádný balíkvzoru %s nevyhovuje žádná cestane, balík %s je nezbytný, neprovedu jeho dekonfiguraci,
+ která by umožnila akci „%s“ne, nelze pokračovat s akcí „%s“ (pomůže --auto-deconfigure):
+%snekontroluji obsah řídící oblastinenainstalovánnenainstalovaný, ale konfigurační soubory zachoványneodstraňuji %s, protože to není symbolický odkaznenahrazuji %s odkazemza dvojtečkou ve verzi nic nenásledujeprázdné jméno balíku v seznamu --%s „%.250s“počet částí archivuzastaralá volba „--%s“, nedostupné balíky jsou čištěny automatickyzastaralý typ komprese „%s“; použijte xzzastaralý typ komprese „%s“; použijte xz nebo gzipzastaralá donucovací volba „%s“zastaralá volba „--%s“starý konfigurační soubor „%.250s“ byl prázdným adresářem a byl proto smazánstarý soubor „%.250s“ je stejný jako některé nové soubory! („%.250s“ i „%.250s“)stará verze balíku má příliš dlouhé jméno info souboru, který začíná „%.250s“V poli „%s“ lze použít pouze přesné určení verzeotevírání komponenty „%.255s“ (v %.255s) selhalo neočekávaným způsobemnedostatek paměti pro novou položkunedostatek paměti pro novou položku s mnoha argumentynedostatek paměti pro nový kontext chybymimo kontext chyby, přerušujipotlačuje se problém, protože je nastaveno --force:balík %.250s je již nainstalován a zkonfigurovánbalík %.250s není připraven ke konfiguraci
+ nelze zkonfigurovat (současný stav „%.250s“)balík %.250s není připraven ke zpracování spouštěčů
+ (současný stav „%.250s“ s žádnými nevyřízenými spouštěči)balík %s %s nelze zkonfigurovat, protože %s má jinou verzi (%s)balík %s nelze zkonfigurovat, protože %s není připraven (současný stav „%s“)balík %s obsahoval seznam jako info souborbalík %s vyžaduje přeinstalaci, ale stejně bude odstraněn podle vašeho požadavkubalík %s vyžaduje přeinstalaci, nebudu nepokračovat v odinstalacibalík %s byl ve stavu hold, ale přesto bude provedena požadovaná akcebalík „%s“ není dostupnýbalík „%s“ není nainstalovánbalík „%s“ není nainstalován a není dostupná žádná informacearchitektura balíkuarchitektura balíku (%s) se neshoduje se systémem (%s)architektura balíku chybí, nebo je prázdnábalík obsahuje příliš dlouhé jméno info souboru (začíná „%.50s“)informace o balíku obsahují adresář „%.250s“informace o balíku rmdir na „%.250s“ neřekl, že to není adresářzískání řídících informací o balíkubalík odklání ostatní do: %s
+získání hodnoty položkyMD5 součet balíkurozbalení balíkubalík je ve stavu %s, ale očekávají se spouštěčebalík je ve stavu %s, ale spouštěče zatím nejsou vyřízenébalík je ve velmi nekonzistentním stavu - před
+ pokusem o odstranění ho raději přeinstalujte.balík je ve velmi nekonzistentním stavu - před pokusem
+o konfiguraci by měl by být přeinstalován.jméno balíku nemůže obsahovat znak nového řádkujméno balíkujméno balíku „%s“ není platné: %sjméno balíku se skládá ze znaků, které nejsou malými písmeny ani `-+.'balík není v databázi dostupných na řádku %d: %.250sověření podpisu balíkuverze balíku%d. část chybíčást „%.250s“ není obyčejný souborvelikost části je buď příliš veliká, nebo nekladnávelikost části musí být alespoň %d KiB (kvůli hlavičce)úspěšně
+pastecesta nemůže obsahovat znak nového řádkupřed-závislostní problém - neinstaluji %.250sprioritapriorita je mimo rozsahpriorita musí být celé číslopriorita %s je mimo rozsah: %spriorita %s: %schyba čtení v %.250schyba čtení v „%.250s“chyba při čtení konfiguračního souboru „%.255s“chyba při čtení ze standardního vstupuchyba čtení na stdin při otázce na konfigurační souborynačítá se info soubor „%.255s“načítá se info soubor „%s“: %snačítá se statoverride soubor „%.250s“sestavený balíkpřed-závislostní problém v %s obsahujícím %s:
+%sohledně %s obsahující balík %s:
+%sodstranění %.250sodstraňovaná architektura „%s“ je momentálně používánaodstraňuji ručně zvolenou alternativu - přepínám %s do automatického režimupřejmenování znamená přepsání „%s“
+  souborem „%s“, což není povolenopřejmenování: odstranění duplicitního starého odkazu „%s“požadovaná operace vyžaduje správcovská oprávněníčíslo revize je prázdnépříkaz rm pro úklidprohledáno, ale nebyl nalezen žádný balík (soubory vyhovující *.deb)<neznámá>nastavuji automatický výběr %snalezeno několik info položek balíku, dovolena pouze jednashellový příkaz pro přesun souborůpřeskakuji vytvoření %s, protože přidružený soubor %s (ze skupiny odkazů %s) neexistujezávislý souborzávislý odkazzávislý odkaz je stejný jako hlavní odkaz %szávislé jménozdrojový soubor „%.250s“ není obyčejným souboremsestavení rozděleného balíkusoubor statoverride obsahuje prázdný řádeksoubor statoverride neobsahuje závěrečný nový řádekstavzáznam stavůodstraňuje se koncové /podproces %s vrátil chybový status %dvelikost symbolického odkazu „%.250s“ se změnila z %jd na %zdsyntaktická chyba v souboru se souborovými spouštěči „%.250s“syntaktická chyba v souboru statoverridesyntaktická chyba v souboru s odloženými spouštěči „%.250s“ na řádku %d znaku %zd „%s“vyžaduje jeden parametr, název spouštěčecíl je adresář - nelze přeskočit test řídícího souborunalezeno několik verzí části %d - jde alespoň o „%.250s“ a „%.250s“v nové verzi balíku není žádný skript - končímtoto je nezbytný balík - neměl by být odstraněnk automatickým aktualizacím se vrátíte příkazem „%s --auto %s“příliš mnoho chyb, končímpříliš mnoho vnořených chyb během opravování chybpříliš dlouhý řádek nebo chybějící nový řádek v „%.250s“vrcholový adresář %s není adresářemchybná syntaxe v souboru se zajímavými spouštěči „%.250s“; neplatné jméno balíku „%.250s“: %.250snázev spouštěče „%s“ není platný: %snázev spouštěče obsahuje neplatný znakzáznamy spouštěčů zatím neexistujíspouštěč aktivovánci soubor pro spouštěče „%.250s“ obsahuje neplatnou syntaxi ve jméně spouštěče „%.250s“: %.250sci soubor pro spouštěče obsahuje neznámou direktivu „%.250s“ci soubor pro spouštěče obsahuje neznámou syntaxi direktivydatový adresář pro spouštěče ještě není vytvořenspouštěče tvoří cyklus, přerušenozkouším raději skript z nového balíku …zkouším přepsat soubor „%.250s“, který je také v balíku %.250s %.250szkouším přepsat „%.250s“, což je odkloněná verze „%.250s“zkouším přepsat „%.250s“, což je odkloněná verze „%.250s“ (balík: %.100s)zkouším přepsat adresář „%.250s“ v balíku %.250s %.250s neadresářemzkouším přepsat sdílený „%.250s“, který se liší od ostatních instancí balíku %.250szadány dva příkazy: --%s a --%snelze (znovu)otevřít vstupní soubor „%.250s“nelze změnit vlastníka cílového souboru „%.250s“nelze zkontrolovat existenci „%.250s“nelze zkontrolovat stav zámku souboru „%s“nelze zkontrolovat existenci archivu „%.250s“nelze změnit vlastníka záložního symbolického odkazu „%.255s“nelze uklidit nepořádek u „%.255s“ před nainstalováním další verze nelze zavřít soubor „%s“nelze zavřít nový soubor „%.250s“nelze zavřít nový soubor s odloženými spouštěči „%.250s“nelze uzavřít změněný stav balíku „%.250s“nelze vytvořit „%.255s“nelze vytvořit „%.255s“ (při zpracování „%.255s“)nelze vytvořit soubor „%s“nelze vytvořit nový soubor „%.250s“nelze vytvořit dočasný adresářnelze vytvořit stavový adresář pro spouštěče (%.250s)nelze odstranit control soubor „%.250s“nelze smazat starý adresář „%.250s“: %snelze smazat využitý skladištní soubor „%.250s“nelze zahodit „%.250s“nelze spustit %s (%s)nelze dorovnat %.250snelze vyprázdnit %.250snelze vyprázdnit soubor „%s“nelze vyprázdnit nový soubor „%.250s“nelze vyprázdnit aktualizovaný stav „%.250s“nelze zavolat fstat na zdrojový soubornelze synchronizovat aktualizovaný stav „%.250s“nelze získat popisovač souboru pro adresář „%s“nelze ignorovat signál %s před spuštěním %.250snelze nainstalovat „%.250s“ jako „%.250s“nelze instalovat nový info soubor „%.250s“nelze instalovat nový info soubor „%.250s“ jako „%.250s“nelze nainstalovat novou verzi souboru s odloženými spouštěči „%.250s“nelze nainstalovat novou verzi „%.255s“nelze nainstalovat změněný stav balíku „%.250s“nelze zamknout %snelze vytvořit záložní odkaz „%.255s“ před nainstalováním nové verzenelze vytvořit záložní symbolický odkaz pro „%.255s“nelze odsunout „%.255s“ pro nainstalování nové verzenelze otevřít „%.255s“nelze otevřít adresář „%s“nelze otevřít soubor „%s“nelze otevřít nový skladištní soubor „%.250s“nelze otevřít výstupní soubor „%.250s“nelze otevřít zdrojový soubor „%.250s“nelze otevřít dočasný řídící adresářnelze otevřít ci soubor pro spouštěče „%.250s“nelze otevřít soubor s odloženými spouštěči „%.250s“nelze otevřít/vytvořit nový soubor s odloženými spouštěči „%.250s“nelze syntakticky zpracovat časový údaj „%.255s“nelze číst skladištní adresář „%.250s“nelze přečíst soubor se souborovými spouštěči „%.250s“nelze přečíst příznaky popisovače souboru pro „%.250s“nelze přečíst odkaz „%.255s“nelze přečíst soubor „%.250s“nelze odstranit „%s“nelze odstranit záložní kopii „%.250s“nelze odstranit zkopírovaný zdrojový soubor „%s“nelze odstranit nově vytvořenou verzi „%.250s“nelze odstranit nově instalovanou verzi „%.250s“nelze odstranit nově nainstalovanou verzi „%.250s“ aby se mohla přeinstalovat záložní kopienelze odstranit starý info soubor „%.250s“nelze přejmenovat nový skladištní soubor „%.250s“ na „%.250s“nelze znovuotevřít soubor „%.250s“nelze obnovit záložní verzi „%.250s“nelze bezpečně odstranit „%.250s“nelze bezpečně odstranit „%.255s“nelze bezpečně odstranit starý soubor „%.250s“: %snelze se přesunout na začátek %.250snelze nastavit bufferování na souboru databáze %snelze nastavit příznak zavřít-při-spuštění pro „%.250s“nelze nastavit spustitelné právo na „%.250s“nelze nastavit mód cílového souboru „%.250s“nelze nastavit proměnné prostředí pro konfigurační skriptnelze nastavit proměnné prostředí pro podprocesnelze zjistit stav %s „%.250s“nelze zjistit stav %s „%.250s“: %snelze zjistit stav „%.250s“nelze zjistit stav řídícího adresářenelze zjistit stav aktuálního konfiguračního souboru „%.250s“nelze zjistit stav nového distribučního konfiguračního souboru „%.250s“nelze zjistit stav nového souboru „%.250s“nelze zjistit stav obnoveného souboru „%.255s“ před nainstalováním další verzenelze volat stat na zdrojový soubor „%.250s“nelze zavolat stat na soubor s odloženými spouštěči „%.250s“nelze synchronizovat adresář „%s“nelze synchronizovat soubor „%.255s“nelze synchronizovat soubor „%s“nelze synchronizovat nový soubor „%.250s“nelze zkrátit pro aktualizovaný stav „%.250s“nelze odemknout %snelze zapsat soubor „%s“nelze zapsat nový soubor „%.250s“nelze zapsat nový soubor s odloženými spouštěči „%.250s“nelze zapsat do popisovače souboru %dnelze zapsat změněný stav balíku „%.250s“nevypárované uvozovky v „%s“neočekávaná chyba bzip2neočekávaná data za řádky package a selection na řádku %dneočekávaný konec souboru za jménem balíku na řádku %dneočekávaný konec souboru před koncem řádku %dneočekávaný konec souboru v %s na %.255sneočekávaný konec souboru ve jménu balíku na řádku %dneočekávaný konec souboru nebo prouduneočekávaný konec souboru při čtení „%.250s“neočekávaný konec souboru při pokusu o čtení %sneočekávaný konec vstupuneočekávaný konec řádku za jménem balíku na řádku %dneočekávaný konec řádku ve jménu balíku na řádku %dneočekávaný konec řádku v souboru statoverrideneznámý argument „%s“neznámá strategie kompreseneznámá strategie komprese „%s“!neznámý typ komprese „%s“!neznámá verze formátu deb balíku: „%s“neznámá donucovací volba „%.*s“neznámá volba „%s“neznámý přepínač -%cneznámý přepínač --%sneznámý výstupní formát pro ověření „%s“neznámý cílový stav na řádku %d: %.250srozbalen, ale nezkonfigurovánneobnovitelná kritická chyba, přerušujinepodporované nastavení kompresenepodporovaný typ komprese „%s“ pro --uniform-compressionnepodporované volby v hlavičce souborunepodporovaný typ kontroly integrityadresář s aktualizacemi obsahuje soubor „%.250s“, jehož název je příliš dlouhý (%d, max=%d)adresář s aktualizacemi obsahuje soubory s různou délkou názvů (%d i %d)aktualizuji alternativu %s, protože se skupině odkazů %s změnily závislé odkazyuživatel „%s“ neexistujejméno uživatelem definované položky „%.*s“ příliš krátképoužívám %s pro poskytnutí %s (%s) v automatickém režimupoužívám %s pro poskytnutí %s (%s) v ručním režimuhodnota pole „%s“ obsahuje zkomolený řádek „%.*s“hodnota pole „%s“ není v tomto místě přípustnáověření balíku %s selhalo!ověření balíku %s selhalo, ale přesto bude nainstalován dle požadavku<žádná>verze %.250s balíku %.250s je již nainstalována, přeskakuji.verze „%s“ má špatnou syntaxiverze „%s“ má chybnou syntaxi: %sčíslo verze nezačíná číslicíčíslo verze je prázdnéverze obsahuje mezeryprázdná verzeverzované Providesčekání na podproces %s selhalovarovánípři čtení %s: %spři odstraňování %.250s není adresář „%.250s“ prázdný, proto nebude odstraněnpři odstraňování %.250s nelze smazat adresář „%.250s“: %s - není tento adresář přípojným bodem?nebudu degradovat balík %.250s z verze %.250s na %.250s, přeskakujiano, dekonfiguruji %s (porušen balíkem %s)ano, odstraním %s ve prospěch %sbalíky musíte zadávat jejich vlastními názvy, a ne názvy souborů, ve kterých jsou obsaženy
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/da.gmo dpkg-1.20.7.1/po/da.gmo
--- dpkg-1.20.7.1-orig/po/da.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/da.gmo	2021-06-09 18:25:14.384502558 -0500
@@ -0,0 +1,695 @@
+���|��:�N?�Na�Nk+O��O�_P&�P=Q&EQlQ-�R.�R�R.�RS 9S4ZS�S5�S-�S.T0>T1oT$�T4�T/�T+UqCU(�U$�UV#V:CV6~V1�V1�V!W2;W(nW�W�W�W.�WXSXkX|X�X9�Xm�X)[Y:�Y9�Y.�Y')Z&QZxZ3�Z5�Z�Z�Zv[[�[U�[4\I\Z\g\|\Z�\�\�\�]=�]^%^6^�E^=!`R_`1�`D�`L)aAva'�a&�a(b'0b+Xb4�b!�b,�b9c-Bcpc#�c�c$�c�c"d6d!Td#vd�d�d�d�d�d"e2.e1ae/�e�e.�e	f-$fRRfH�fQ�fA@ge�gf�gIOh7�h<�hi(!iBJi�i�i�i
�i �ij5j1Pj0�j�j�j#�j!k$kAkK^k7�k5�k-lFl!`l�l'�l-�l-�l  m5Amwm �m�m$�m,�m."n.Qn�nH�n6�n( o>Io$�o �o�o�o�op�p�p#�p:�p--r[rlr}r�r*�r<�r#s-(s-Vs��st&t�=t[3u��ug�y
�z|}(1}-Z}�}8�}<�}.~I~0`~3�~1�~�~�+1�*�J=�2�����&`�2��E��V�W�5p�.��-Ճ+�//�
_�%m�/��*Ä&�!�]7���!��M��
+�2 ��S����"����4ى.�5=�3s���G��8��,8�e�(������ċ��3�)�$G�:l�,��VԌ +�L�*h�����&��3ߍ-�+A�,m�	������*Ҏ��� 0�HQ�������r�g%�j������Ӓ4��5֓���Ԕ���uK�&��A�{*�!��,ȗ*��. �O��n��� v�5��͚ �,�$2�.W�>��*ś;�,,��Y��u����"k�������9��(�X�3o�?��8�2�1O�,��:��4�5�4T�A��Mˡ-�G�[�#u�����ˢߢ ��1�8I�?��B£6�<�&X�.�!��!Ф5�(�E�[�p�����	��9��.�#�,C�p���%��զ%��-�1H�z���)��1٧:�?F�&����=ʨ7�@�!Z�.|�*��#֩"��&�0D�u���@��+�;�3P�����A����&�-D�0r�;��0߬(�?9�)y�-��"ѭ��4
+�E?���,��"ͮ!��51� g�8����Я-�5�,S�B��Bð+�G2�$z� ��:��;��7�P�&_���7��ڲD��c=���2��*�"�3.�:b�-��&˴��$�:�"V�y���(��=��*��J(�s�"������ض-��%�)6�%`�������ȷ����)�=�\�!{�!��#���%�%&�'L�,t�����ٹ*��'!�'I�q�!���� ź-�#�#8�+\�%��$��ӻ ��)�<�"R�:u���Fʼ�-�J�$g�������ս#���)�!I�"k�:��ɾ5� �2?�r�%����0ǿ*��$#�/H�x�6��V��"�(8�a�<q�.��)��(�*0�+[���,��)��4��3/�2c�4��;��<�6D�:{�7��@��0/�;`�?��$��A�=C�$��0��!����b�w�c����:�<R�=��_��H-�v�������)��)��$&��K�\��&,�&S�'z� ��7��t��2p�-��'��4��..�)]�G��-����	�k�/����>��%�$4�#Y�&}�!����"��^�@g���%��+��7	�!A�c�}���������O��8?�*x���������3���-�7H�5����|��
+I�T�mt�0��G�[�){�!������5��0�G�"[�4~���!��C��=7�%u�
�� ��(����%�76�n�I��G��P�Gi�.��?��# �7D�#|�+��2��Y��fY�L��M
�&[�K��3��=�@�^�=|���4��F�1K�;}�&�������%8�.^�.��a��e� ����D�����-�&@�-g�7��������.��(�1�J�"f�������)����&�"6�"Y�"|���6�����7 �BX�H��&��0�<�6S���$��4����O�
+b�
+m�x�
+��%����%��*�3�
:�H�+]�7��+��!��$�44�Fi�@��6��1(�Z�,t�R��'��$�	A�ZK�4��2��'�6�.R�D��G��Y�Qh�^��%�+?�2k�%��%��1��+�NH���!��3��*�2�5L���"��$��2��+�+D�,p�����"��$���!4�*V���*��0��0��&*�3Q�4��5��)��,�G�DY�*��4�����4�&M�#t�#��%��(��.�9:�'t�*��.����!�5�(K�(t�4��4��[�,c�4��#��,��"�"9�/\�/��+��+��-�*B�&m�!�������� �2)�0\�&��B��#��.�J�h��� ��1�����!�3A�u�*������6��&(� O�.p���4��1��+�J�`�"}�����"����(�!<�(^�����:��"��# SDM�E�(,(U*~.�0�"	I,v4�(�"�1OWBl`�9'J#r`�|�Dtk�f%���f$	B&	&i	�	.�
+1�
+�
+2A#`9��4�/0@-q0�"�7�6+
b
nz
.�
"#;-_=�1�2�<0$m4�.�#�&A.P
+A��"��?v]5�?
+:J8�1�'�8)@b����dKJ��#;Sac����B�"2�BZdwA�KRjL�0
+/;/k.�/�8�"38VA�0� >!Z|��� �$6I]&}C�8�4!V3r�*�O�K> X� B� p&!z�!J"8]"=�"�"2�"H#g# }#�#�#'�#�#2	$/<$3l$�$�$*�$#�$% <%C]%>�%2�%/&C&_& ~&'�&-�&7�&#-'0Q'!�' �'�'%�'*(.1(+`(#�(H�(:�(*4)5_)%�)"�)#�)*	**�**�*$�*G�*'?,g,w,�,�,(�,;�,--2?-4r-��-
+C.N.�`._X/��/f�3#5#86\7&t72�7�7:�7K%83q8�8/�81�8G9
f9t9�9C�90�:$;S7;2�;��;(O=9x=K�=V�=U>;r>0�>3�>+?)??i?.x?,�?*�?'�?%'@bM@�@(�@Q�@0A>FA��Al-C!�D�D<�D*E+BE9nE�ET�E7F'LF(tF*�F�F�F �F	G6
+G+AG$mG8�G1�G@�G >H_H%xH�H
�H%�H8�H6&I.]I%�I�I�I�I0�IJ 9J&ZJ:�J�J��J��KUKLX�L��L��M,�N/�N�O��O��P]NQ#�Q=�Q�R�RB�R/�R2$S"WS�zS�1U%�U>�U#V9V6YV%�V!�VG�V4 WGUW4�W��W�X��X�;Y-/Z]ZjZwZ>�Z)�Z^�ZBY[E�[>�[8!\8Z\.�\<�\>�\<>];{]<�]L�]3A^u^ �^ �^%�^�^�^__3-_8a_G�_F�_8)`!b`%�`>�`&�` a81aja�a�a�a�a�a�aAb-Fb$tb<�b(�b"�b9"c'\c.�c1�c3�cd"1d,Td2�d;�d@�d(1e"ZeA}e=�e�e+f/Gf+wf5�f&�f%g5&g\gxg;�g+�gT�g>Th�h�hS�h)&i2PiE�i5�iJ�i0Jj){jJ�j*�j/k&Kkrk9�kG�kl2.l+al0�l@�l4�l/4mLdm%�m�m1�mC'n-knD�nK�n2*oM]o!�o�o;�o=%pcp
~p0�p �pB�p !qGBql�q
+�q8r5;r+qr9�rA�r:s'Ts|s�s�s"�s*�st7t(@tTit&�tI�t/u'?ugu}u2�uB�u
v<v#Vvzv�v�v�v�v�v�v.w%@w'fw%�w.�w3�w+x1Cx-ux(�x4�xy&y#?y.cy/�y.�y�y$
z$2z,Wz7�z3�z-�z>{3]{0�{$�{$�{|)|F|(d|K�|�|Q�|&H}o}%�})�}�}#�}~"7~-Z~$�~-�~/�~'<3!p;�!�4�%�&6�!]�1�0��/�7�J�<Z�Q��,�5�L�4^�4��0Ȃ$��.�-M�{�,��+ȃ:�3/�4c�;��QԄO&�5v�?��>�B+�;n�<��H�%0�JV�@��"�5�;�Y�_v�#ֈi��d�6��9��@��]6�J��ߊ"���>�$X�&}�%���ʋLZ�*��-Ҍ)�(*�>S�z��3
�,A�'n�1��8Ȏ0�e2�:��ӏ�~��Iu���=Ґ �1�Q�+p�"��!��"�`�@e���&��0ܒ;
�$I�n�������ݓ��c�Vl�4Ô���&�/�=;�y�$��C��<��<��W������:��Iӗ!�$?�#d�����;�����!/�=Q�"��+��FޙD%�+j���-��1՚�"'�1J�|�A��OΛX�Uw�2͜I�1J�F|�,Ý/�5 �\V�d��F�L_�0��Oݟ5-�Ec� ��ʠH�3�4C�Ox�4ȡK��"I� l�����#â/�2�wJ�i£#,�	P�DZ� ����٤+�8�HM�	����!��7ʥ	��+�)J�t�����&��ئ7��$/�$T� y���D��%���23�Ef�M��)��4$�Y�9s��� ��;ש �V4�����,��	ͪ(ת�(�/D�t�{���/��?Ϋ%�4�#S�;w�I��:��88�Gq���4ѭQ�%X�&~���[��3	�1=�-o�(��*ƯE�M7�\��R�]5�#��-��.�.�/C�6s�:��U�;�U�2t�.��ֳ8�+� G�%h�2��3��,��+"�N�i���.��ε ��/�%>�5d�0��2˶+��;*�>f�7��,ݷ3
+�>�^P�A��?�1�I�c�%}�$��"ȹ,�'�1@�:r�'��&պ.��!+� M�n�*��&��.׻1�d8�4��8Ҽ%�61�'h�'��9��<�4/�1d�6��/;'��"%�H�!e�����E��:�+A�Jm�!��2�� 
�".� Q�%r�3��������3� R�/s�"����.��"�"+�2N���4��0��*�,�B�"_��� ��1������*/�*Z���8��C��,"�.O�[~�T��I/�&y�3��/��@�8E�%~�K����?��&8�#_�����+������G��oB�G��)��)$�MN�P�S���i�p������>�x��E}��c��F7r58��g��	j��n��\I$iS���:Jt!�/E���r�zmM	B�#��h�U�N*�� )����������v�������M��Uq�7��y���:c�R�:6^S0�xKz������1�����
��I�w�w����������b%u�V����s�$��8�O;t�.{=0���X��4o�Cw�B[��������d7&�m��_|-���sF)���-5yrT_C.O.���#j#v�b��QM��{ ��<l;;1^����l/HfBR��	�+�����1�W���3����'j�����k+^���R�)z�]��<�f��T��?�(BK��A���6�x��0��`�'�L*
+N{����sH$(T��9y�b��g�DU�/�����z�p9��&�n�R����E%�`'�C�d���"
+:����!c��V�p>��	DaPu����@��A�\W�g�X,��������O������+a)�D�rY� L�6MN�x�����h��Zj�}��v>L&�"c�~8JQ�YiXe�L��*��_�����Nf�27�1t9,���P�d�%��\�4*�-qZ
+Gw�J�����H��(a(|�^9�Ae��o�!����oP�2u�_
h�5,W8�����F�![2�]|s�WQZ��lgn>�K�k=���~�~G�Z��l�q�<k�3�?&�F�[e`�a�V`?�#��@vo���S����0��=.�Ib�G���n����Y�����I
+} dk��4���=$����\����5[���m-����/V�EH�i3|,f�}�TQ�G��C�%���@�~t;��U����K�p@e���hY]�qm����"A
�y����?�
D<�X{4'��"O��6�]�3+���J�u��2
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s suggests %s%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one package name argument--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMore than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenVersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open security status notification channelcannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentgenerated corrupt ar header for '%s'header is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file or streamunexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion number does not start with digitversion string has embedded spacesversion string is emptyversioned Provideswait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.22
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:48+0200
+Last-Translator: Joe Hansen <joedalton2@yahoo.dk>
+Language-Team: Danish <debian-l10n-danish@lists.debian.org>
+Language: da
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+
+ pakker hvis forestående udløsere er eller kan være uløselige:
+
+Konfigurationsfilen '%s' eksisterer ikke på systemet.
+Installerer ny konfigurationsfil efter dit ønske.
+
+Fejlsøgningstilvalg kan blandes med bitwise-or.
+Bemærk at meningerne og værdierne kan ændre sig.
+
+Brug 'dpkg' til at installere og afinstallere pakker fra dit system, eller
+'apt' eller 'aptitude' for en brugervenlig pakkehåndtering. Pakker, der
+pakkes ud med 'dpkg-deb --extract' bliver ikke installeret korrekt!
+
+ADVARSEL - brug af tilvalg markeret [!] kan i alvorlig grad skade din installation.
+Fremtvingelse af tilvalg markeret med [*] er aktiveret som standard.
+     Uændret siden installationen.
+     Versionen i pakken er den samme som ved sidste installation.
+     ikke almindelig fil       %.255s
+   Hvad vil du gøre ved det? Dine muligheder er:
+    Y eller I  : installér pakkeadministratorens version
+    N eller O  : behold den nuværende version
+        D      : vis forskellen mellem versionerne
+        Z      : start en skal for at undersøge situationen
+  %.250s (version %.250s) er til stede og %s.
+  %.250s (version %.250s) vil blive installeret.
+  %.250s er %s.
+  %.250s er installeret, men versionen er %.250s.
+  %.250s er ikke installeret.
+  %.250s vil blive afkonfigureret.
+  %.250s vil blive installeret, men versionen er %.250s.
+  %.250s vil blive slettet.
+  %.250s er udpakket, men blev aldrig konfigureret.
+  %.250s er udpakket, men versionen er %.250s.
+  %.250s sidst konfigurerede version er %.250s.
+  %.250s giver %.250s og er til stede og %s.
+  %.250s giver %.250s og vil blive installeret.
+  %.250s giver %.250s, men er %s.
+  %.250s giver %.250s, men planlægges afkonfigureret.
+  %.250s giver %.250s, men planlægges afinstalleret.
+  %s (%s) tilbyder %s.
+  -?, --help                       Vis denne hjælpetekst.
+      --version                    Vis versionen.
+
+  Pakken %s afventer behandling af udløsere.
+  Pakken %s er ikke sat op endnu.
+  Pakken '%s' er ikke installeret.
+  Pakken %s skal til at blive afinstalleret.
+  Pakken %s, som giver %s, afventer behandling af udløsere.
+  Pakken %s, som giver %s, er ikke sat op endnu.
+  Pakken '%s, som giver %s,' er ikke installeret.
+  Pakken %s, som giver %s, skal til at blive afinstalleret.
+  Version af %s på systemet er %s.
+  Version af %s på systemet, leveret af %s, er %s.
+  Versionen af %s, der skal sætte op, er %s.
+  lænken findes ikke i øjeblikket  lænken peger for øjeblikket på %s  slave %s: %s %7jd byte, %5d linjer   %c  %-20.127s %.127s
+ %d i %s:  %d pakke fra følgende gruppe: %d pakker fra følgende grupper: %s (%jd byte)
+ %s (%s) ødelægger %s og er %s.
+ %s (ikke en almindelig fil)
+ ==> Ændret (af dig eller af et script) siden installationen.
+ ==> Filen på systemet er oprettet af dig eller af et script.
+ ==> Filen er også i pakken fra pakkeadministratoren.
+ ==> Beholder gammel konfigurationsfil som standard.
+ ==> Ændret (af dig eller af et script) siden installationen.
+ ==> Pakkedistributør har frigivet en opdateret version.
+ ==> Benytter eksisterende gammel fil efter dit ønske.
+ ==> Benytter ny konfigurationsfil som standard.
+ ==> Benytter ny fil efter dit ønske.
+ Pakke %s: dele  Den forvalgte handling er at installere en ny version.
+ Den forvalgte handling er at beholde den eksisterende version.
+ og  afhænger af %d forventet program er ikke fundet i PATH eller er ikke eksekverbar %s%d forventede programmer er ikke fundet i PATH eller er ikke eksekverbar %s%d fil eller katalog installeret i øjeblikket.)
+%d filer og kataloger installeret i øjeblikket.)
+%d ønsket kontrolkomponent mangler%d ønskede kontrolkomponenter mangler%s (underproces): %s
+%s - prioritet %d%s er i konflikt med %s%s er i konflikt med %s%s ødelagt: %s%s fejlsøgningstilvalg, --debug=<octal> eller -D<octal>:
+
+ Antal   Ref. i kilde     Beskrivelse
+%s afhænger af %s%s forbedrer %s%s fremtvinger tilvalg - kontroller opførsel når der opstår problemer:
+  advar men fortsæt:   --force<ting>,<ting>,...
+  stop med fejl:       --refuse-<ting>,<ting>,... | --no-force-<ting>,...
+ Fremtvinger ting:
+%s er ikke ordentligt installeret; ignorerer afhængigheder af den%s afhænger i forvejen af %s%s anbefaler %s%s foreslår %s%s:
+    Delformatversion:               %d.%d
+    Del i pakke:                    %s
+        ... version:                %s
+        ... arkitektur:             %s
+        ... MD5-checksum:           %s
+        ... længde:                 %jd byte
+        ... opdel for hver:         %jd byte
+    Del-antal:                      %d/%d
+    Del-længde:                     %jd byte
+    Del-forskydning:                %jd byte
+    Delfilstørrelse (brugt andel):  %jd byte
+
+%s: konfigurationsfil '%.250s' er hverken en almindelig fil eller symbolsk lænke (= '%s')%s: konfigurationsfil '%.250s' bliver til et degenereret filnavn
+ ('%s' er symbolsk lænke til '%s')%s: konfigurationsfil '%s' er en selvrefererende lænke
+ (= '%s')%s: afhængighedsproblemer, men konfigurerer alligevel, som du ønskede:
+%s%s: afhængighedsproblemer, men behandler udløsere alligevel efter dit ønske:
+%s%s: afhængighedsproblemer, men afinstallerer efter dit ønske alligevel:
+%s%s: fejl ved binding af inddata til bzip2-strøm%s: fejl ved binding af inddata til gzip-strøm%s: fejl ved binding af uddata til bzip2-strøm%s: fejl ved binding af uddata til gzip-strøm%s: kunne ikke lænke '%.250s' til '%.250s': %s%s: kunne ikke fjerne '%.250s' (inden overskrivning): %s%s: kunne ikke fjerne '%.250s': %s%s: kunne ikke fjerne gammel sikkerhedskopi '%.250s': %s%s: kunne ikke fjerne tidligere distribueret version '%.250s': %s%s: kunne ikke omdøbe '%.250s' til '%.250s': %s%s: intern bzip2-læsefejl%s: intern bzip2-læsefejl: '%s'%s: intern bzip2-skrivefejl%s: intern bzip2-skrivefejl: '%s'%s: intern gzip-læsefejl%s: intern gzip-læsefejl: '%s'%s: intern gzip-skrivefejl%s: intern gzip-skrivefejl: %s%s: intern gzip-skrivefejl: '%s'%s: lzma-lukkefejl%s: lzma-fejl: %s%s: lzma-læsefejl%s: lzma-skrivefejl%s: kopifejl for gennemløb: %s%s: kan ikke åbne %s til hashning: %s%s: kan ikke læse lænken for konfigurationsfil '%s'
+ (= '%s'): %s%s: kan ikke tilgå konfigurationsfil '%s'
+ (= '%s'): %s'%.255s' indeholder ikke kontrolkomponenten '%.255s''%s' er i modstrid med '%s''%s' indeholder brugerangivet prioritetsværdi '%s''%s' kan ikke have en værdi'%s'-felt, ugyldigt pakkenavn '%.255s': %s'%s'-felt, manglende arkitekturnavn eller skrald hvor pakkenavnet var forventet'%s'-felt, manglende pakkenavn eller skrald, hvor pakkenavnet var forventet'%s'-felt, henvisning til '%.255s':
+ '%c' er forældet, brug '%c=' eller '%c%c' i stedet'%s'-felt, henvisning til '%.255s':
+ ugyldig versionsrelation %c%c'%s'-felt, henvisning til '%.255s':
+ implicit nøjagtig match på versionsnummer, foreslår brug af '=' i stedet'%s'-felt, henviser til '%.255s':
+ versionsværdien starter med ikke-alfanumerisk tegn, foreslår at tilføje et mellemrumfeltet '%s', henvisning til '%.255s': ugyldigt arkitekturnavn '%.255s': %sFeltet '%s', henvisning til '%.255s': version uafsluttetFeltet '%s', syntaksfejl efter henvisning til pakken '%.255s''%s' kræver en værdi'%s' ikke fundet i PATH, eller er ikke eksekverbar(Bemærker forsvindingen af %s, der er blevet fuldstændigt erstattet.)
+(Læser database ... (ingen tilgængelig beskrivelse)(total %jd byte)
+, core efterladttilvalget -%c tager ikke imod en værditilvalget -%c kræver en værdi--%s --pending tager ingen ikke-tilvalgs-parametre--%s --recursive kræver mindst ét stiargument--%s kræver et .deb-filnavn og mappe som parameter--%s kræver <navn>--%s kræver <navn> <sti>--%s kræver et .deb-filnavn som parameter--%s kræver en <katalog>-parameter--%s kræver et <fil>-argument--%s kræver et enkelt parameter--%s kræver et målkatalog.
+Måske skulle du bruge dpkg --install?--%s kræver et gyldigt pakkenavn men det er '%.250s' ikke: %s--%s kræver mindst én pakkearkivfil som argument--%s kræver mindst ét pakkenavn som parameter--%s kræver fire parametre--%s tager ikke imod en værditilvalget --%s kræver en værdi--%s kræver en positiv oktal parameter--%s kræver ét eller flere delfilargumenter--%s skal bruge højst én 'Packages'-fil som parameter--%s kan højest tage to argumenter--%s tager højst to parametre (.deb og katalog)--%s tager nøjagtig en parameter--%s tager præcist to parametre--%s tager ingen parametre--%s tager et pakkenavn som parameter--%s tager kun ét parameter(.deb-filnavn)--auto kræver nøjagtig ét delfils-parameter--auto kræver brugen af tilvalget --output--compare-versions ugyldig relation--compare-versions kræver tre parametre: <version> <relation> <version>--search kræver mindst ét filnavnsmønster som parameter--split kræver et kildefilnavns-parameter--split tager højst ét kildefilnavn og målpræfiks--update er givet, men %s findes ikke--update er nytteløs med --remove... det ser ud til, at alt gik o.k..../%s; men:
+<komprimér> fra tar -cf<deb> er filnavnet på et arikv i Debianformat.
+<cfil> er navnet på en administrativ filkomponent.
+<cfelt> er navnet på et felt i hovedkontrolfilen.
+
+<dekomprimér><lænke> og <sti> kan ikke være ens<lænke> er den symbolske lænke, der peger på %s/<navn>.
+  (f.eks. /usr/bin/pager)
+<navn> er denne lænkegruppes hovednavn.
+  (f.eks. pager)
+<sti> er placeringen for en af de alternative målfiler.
+  (f.eks. /usr/bin/less)
+<prioritet> er et heltal; tilvalg med højere numre gives højere prioritet i
+  automatisk tilstand.
+
+<pakkestatus og fremgangsfildeskriptor><standard-fejl><standard-inddata><standard-uddata>Tilføjer '%s'
+Tillad installation af pakker i konfliktAlternativ %s uændret, da valget %s ikke er tilgængeligt.Installer altid manglende konfigurationsfilerBrug altid de nye konfigurationsfiler, spørg ikkeBrug altid de gamle konfigurationsfiler, spørg ikkeEn anden proces har skrivebeskyttet databasen, og er måske i færd med at
+ændre den - nogle af følgende problemer kan være forårsaget af netop dette.
+ArkitekturGodkender %s ...
+Kommandoer:
+  --add <ejer> <gruppe> <tilstand> <fil>
+                           tilføj en ny <sti>-post i databasen.
+  --remove <fil>           fjern <sti> fra databasen.
+  --list [<glob-mønster>]  vis nuværende tilsidesættelser i databasen.
+
+Kommandoer:
+  --check-supported                Tjek om kørende dpkg understøtter udløsere.
+
+Kommandoer:
+  --install <lænke> <navn> <sti> <prioritet>
+    [--slave <lænke> <navn> <sti>] ...
+                           tilføj en gruppe af alternativer til systemet.
+  --remove <navn> <sti>    fjern <sti> fra gruppealternativet <navn>.
+  --remove-all <navn>      fjern gruppen <navn> fra alternativsystemet.
+  --auto <navn>            skift hovedlænken <navn> til automatisk tilstand.
+  --display <navn>         vis oplysninger om gruppen <navn>.
+  --query <navn>           variant af --display <navn> til maskinfortolkning.
+  --list <navn>            vis alle mål for gruppen <navn>.
+  --get-selections         vis hovedalternativnavne og deres status.
+  --set-selections         læs alternativ status fra standardinddata.
+  --config <navn>          vis alternativer for gruppen <navn>, og bed
+                           brugeren om at vælge, hvilket der skal benyttes.
+  --set <navn> <sti>       brug <sti> som alternativ til <navn>.
+  --all                    kald --config for alle alternativer.
+
+Kommandoer:
+  -s|--split <fil> [<præfiks>]    Opdel et arkiv.
+  -j|--join <del> <del> ...       Splejs dele sammen.
+  -I|--info <del> ...             Vis oplysninger om en del.
+  -a|--auto -o <komplet> <del>    Auto-akkumulér dele.
+  -l|--listq                      Vis dele, der ikke passer.
+  -d|--discard [<filnavn> ...]    Slet dele, der ikke passer.
+
+Kommandoer:
+  [--add] <fil>            tilføj en omdirigering.
+  --remove <fil>           fjern omdirigeringen.
+  --list [<glob-mønster>]  vis omdirigeringer for fil.
+  --listpackage <fil>      vis pakken, der omdirigerer filen.
+  --truename <fil>         returnér den omdirigerede fil.
+
+Sammenligningsoperatorer til --compare-versions er:
+ lt le eq ne ge gt       (betragt tom version som tidligere end andre versioner);
+ lt-nl le-nl ge-nl gt-nl (betragt tom version som senere end andre versioner);
+ < << <= = >= >> >       (kun for kompatibilitet med kontrolfilens syntaks).
+
+Konfigurationsfil '%s'
+Konfigurationsfil '%s' (faktisk '%s')
+Konfigurer alle pakker som kan hjælpe denne pakkeAfkonfigurerer %s (%s) ...
+Afkonfigurerer %s (%s), så %s (%s) kan afinstalleres ...
+Programforespørgselsværktøjet %s version %s til Debianpakkehåndtering.
+Pakkeudløserværktøjet %s version %s til Debian.
+Debian %s version %s.
+Debian '%s' pakkearkivshåndteringsversion %s.
+Debian '%s' pakkehåndteringsprogram version %s.
+Debian '%s' pakke-opsplitnings/sammensmeltnings-værktøj; version %s.
+Slettede %s.
+Afhængigheder og konflikterBeskrivelseØnsket=Ukendt/Installér/(R)fjern/(P)udrens/tilbageHold
+| Status=(N)ikke/Installeret/(C)Konfigfiler/Udpakket/(F)halvkonfig./
+|/       Halvt-installeret/(W)afventer-udløser/(T)udløser-afventer
+||  Fejl?=(ingen)/tilbilbageHoldt/geninstallation-kRæves/X=begge-problemer
+|| /      (Status, Fejl: store bogstaver=alvorligt)
+Udfør ikke sikre I/O-handlinger under udpakningDer opstod fejl under behandlingen:
+Afslutningsstatus:
+  0 = o.k.
+  1 = med --auto, fil er ikke en del
+  2 = problemer
+Filen '%.250s' er ikke en del af et opdelt arkiv.
+Format-syntaks:
+  Et format er en streng, der udlæses for hver pakke. Formatet kan omfatte
+  standard-escapesekvensen \n (linjeskift), \r (vognretur) eller \\
+  (ren backslash). Pakkeoplysninger kan medtages ved at indsætte variabel-
+  referencer til pakkefelter med syntaksen ${var[;bredde]}. Felterne bliver
+  højrejusteret, medmindre bredden er negativ. I så fald benyttes
+  venstrejustering.
+Generelt nyttig information om forløbetIgnorerer anmodning om at fjerne delt omdirigering '%s'.
+Ignorerer ønsket om at omdøbe filen '%s', ejet af omdirigeret pakke '%s'
+Informationer om %d pakke blev opdateret.
+Informationer om %d pakker blev opdateret.
+Ufattelig mængde af nonsensInstaller en pakke selv hvis den fejler godkendelseskontrolInstaller selv om det ødelægger en anden pakkeInstallerer ny version af konfigurationsfil %s ...
+Kald og status for vedligeholdelsesskripterAffaldsfiler efterladt i depotkataloget:
+Forlader '%s'
+Masser af uddata for afhængigheder/konflikterMasser af nonsens om f.eks. dpkg/info-mappenMasser af uddat for hver konfigurationsfilMasser af uddata for hver behandlet filMasse af uddata vedrørende udløsereFlere kopier af pakken %s er blevet udpakket under
+ denne kørsel! Konfigurerer den kun én gang.
+NavnIngen omdirigering '%s', ingen fjernet.
+Bemærk: PATH for root bør normalt indeholde /usr/local/sbin, /usr/sbin og /sbinIntet at konfigurere.Tilbyd at erstatte konfigurationsfiler med ingen nye versionerTilvalg:
+  --admindir=<katalog>             Brug <katalog> frem for %s.
+  --by-package=<pakke>             Tilsidesæt udløser-afventer (sættes
+                                     normalt af dpkg).
+  --await                          Pakke skal afvente behandlingen.
+  --no-await                       Ingen pakke behøver afvente behandling.
+  --no-act                         Test kun - lav ingen faktiske ændringer.
+
+Tilvalg:
+  --depotdir <katalog>            Brug <katalog> i stedet for %s/%s.
+  -S|--partsize <størrelse>       Delstørrelse i KiB, for -s (standard er 450).
+  -o|--output <fil>               Til -j (standard er <pakke>-<version>.deb).
+  -Q|--npquiet                    Ti stille når -a ikke er en del.
+  --msdos                         Generér 8.3-filnavne.
+
+Uddata for hver konfigurationsfilUddata for hver behandlet filOverskriv en omdirigeret fil med en ikke omdirigeret versionOverskriv en fil fra en pakke med en andenOverskriv en pakkes mappe med en andens filPATH mangler vigtige programmer, problemer er sandsynligePATH er ikke defineretPakken %s er tilbageholdt, rører den ikke.  Brug --force-hold for at gennemtvinge.
+Pakken %s nævnes flere gange, behandles kun én gang.
+Pakken '%s' indeholder ingen filer (!)
+Pakker, der endnu ikke er sammenføjet:
+Del %d fra pakken %s gemt (ønsker stadig StiFeltet Pre-DependsGør klar til at udpakke %s ...
+PrioritetBehandl selv pakker med forkert eller ingen arkitekturBehandl også pakker med forkerte versionerBehandler udløsere for %s (%s) ...
+Behandlingen blev stoppet fordi der var for mange fejl.
+Renser ud i konfigurationsfilerne for %s (%s)...
+Samler pakken %s ud af %d del: Samler pakken %s ud af %d dele: Gemte information om %s fra %s.
+Fjern en essentiel pakkeFjern pakker som kræver installationAfinstallerer %s (%s) ...
+Fjerner '%s'
+Erstat en pakke med en lavere versionErstattet af filer i den installerede pakke %s (%s) ...
+Erstatter oplysninger om tilgængelige pakker via %s.
+Erstatter filer i den gamle pakke %s (%s) ...
+Vælger tidligere fravalgt pakke %s.
+ValgAngiv alle tvungne tilvalgSætter %s (%s) op ...
+Tåbelig mængde af uddata vedrørende udløsereSpring ugyldig linje over: %sOverspring ukendt alternativ %s.Udelader tidligere fravalgt pakke %s.
+Opdeler pakken %s i %d del: Opdeler pakken %s i %d dele: StatusFølgende pakker afventer behandling af udløsere, som de har aktiveret i
+andre pakker.  Der kan anmodes om denne behandling ved brug af dselect
+eller dpkg --configure --pending (eller dpkg --triggers-only):
+De følgende pakker er i uorden p.g.a. alvorlige problemer under
+installationen. De skal geninstalleres for at de (og eventuelle pakker,
+der afhænger af dem) skal virke ordentligt:
+De følgende pakker mangler i listekontrolfilen i databasen,
+de skal geninstalleres:
+De følgende pakker mangler i md5sums-kontrolfilen i databasen,
+de skal geninstalleres:
+De følgende pakker er kun halvt konfigurerede, sikkert p.g.a. problemer med
+at konfigurere dem i første omgang. Konfigurationen bør forsøges igen med
+"dpkg --configure <pakke>" eller konfigurationsmenuen i dselect:
+De følgende pakker er kun halvt installerede p.g.a. problemer under
+installationen. Installationen kan sandsynligvis gennemføres ved at forsøge
+igen. Pakkerne kan afinstalleres med dselect eller "dpkg --remove":
+De følgende pakker har ikke en arkitektur:
+De følgende pakker har en ugyldig arkitektur:
+De følgende pakker har en ukendt fremmed arkitektur, som vil medføre
+afhængighedsproblemer på brugerflader. Dette kan rettes ved at registrere
+den fremmede arkitektur med dpkg --add-architecture:
+Følgende pakker er blevet udløst, men udløserbehandlingen er ikke udført
+endnu.  Der kan anmodes om udløserbehandling ved brug af dselect
+eller dpkg --configure --pending (eller dpkg --triggers-only):
+Du følgende pakker er blevet udpakket, men endnu ikke konfigurerede.
+De skal konfigureres med "dpkg --configure" eller fra konfigurationsmenuen
+i dselect, for at virke:
+Der er %d valg for alternativet %s (giver %s).Der er %d valg for alternativet %s (giver %s).Der er intet program, der giver %s.Der er kun et alternativ i lænkegruppen %s (tilbyder %s): %sDette er frit programmel; se GNU General Public License version 2 eller
+senere for kopieringsbetingelserne. Der er INGEN garanti.
+Udløseraktivitet og behandlingForsøg at (af)installere ting selv når ikke administrator (root)Omdan alle afhængighedsproblemer til advarslerOmdan afhængighedsversionsproblemer til advarslerSkriv 'exit', når du er færdig.
+Skriv dpkg --help for hjælp om installation og afinstallation af pakker [*];
+Brug 'apt' eller 'aptitude' for en mere brugervenlig pakkehåndtering;
+Skriv dpkg -Dhelp for en liste over værdierne i dpkg's fejlsøgningsflag;
+Skriv dpkg --force-help for en liste over gennemtvingningstilvalg;
+Skriv dpkg-deb --help for hjælp vedrørende manipulation af *.deb-filer;
+
+Tilvalg med [*] giver mange uddata - led dem gennem 'less' eller 'more'!Skriv dpkg-deb --help for hjælp med manipulation med *.deb-filer
+Skriv dpkg --help for hjælp med installation og afinstallation af pakker.Skriv "dpkg-split --help" for hjælp.Skriv dpkg-tigger --help for at få hjælp om dette værktøj.Udpakker %s (%s) ...
+Udpakker %s (%s) over (%s) ...
+Opdaterer oplysninger om tilgængelige pakker via %s.
+Brug: %s [<tilvalg> ...] <kommando>
+
+Brug '%s --help for programhjælpBrug 'apt' eller 'aptitude' for en mere brugervenlig pakkehåndtering.
+Brug --help for at få hjælp om omdirigerede filer.Brug --help for at få hjælp om overskrivning af filstatusinformation.Brug --help for at få hjælp om pakkeforespørgsel.Brug standardindstillingen for nye konfigurationsfiler
+hvis en sådan er tilgængelig, spørg ikke. Hvis ingen
+standard kan findes, vil du blive spurgt med mindre
+en af tilvalgene confold eller confnew også er angivetVersionVersion af dpkg med fungerende %s-understøttelse er endnu ikke konfigureret.
+ Kør venligst 'dpkg --configure dpkg', og prøv igen.
+Ved tilføjelse er standarden --local og --divert <original>.distrib.
+Ved fjernelse skal --package eller --local og --divert stemme hvis givet.
+Pakkepræinstallations- eller -postinstallationsscripter skal altid angive 
+--package og --divert.
+Ville afinstallere eller udrense %s (%s) ...
+[forvalgt=N][forvalgt=Y][ingen forvalgt handling]admindir skal være inden i instdir for at dpkg virker korrektkonfigurerer også '%s' (krævet af '%s')alternativet %s (del af lænkegruppe %s) findes ikke; fjerner den fra listen over alternativeranternativet %s kan ikke være hovedalternativ: det er slave af %salternativet %s kan ikke være slave af %s: det er et hovedalternativanternativet %s kan ikke være slave af %s: det er slave af %salternativet %s til %s er ikke registreret, fjerner ikkealternativet %s til %s er ikke registreret, sætter ikkealternativ-lænke %s håndteres allerede af %salternativ-lænke %s håndteres allerede af %s (slave af %s)alternativ-lænke er ikke absolut, hvilket den burde være: %salternativnavnet (%s) må ikke indeholde '/' eller mellemrumalternativ-sti er ikke absolut, hvilket den burde være: %stvetydigt pakkenavn '%s' med mere end en installeret instansder findes allerede en omgåelse for '%s', men denne ignoreres givet --forceder findes allerede en omgåelse for '%s'; afbryderenhver omdirigering af %senhver omdirigering af %s til %sar-medlemsnavn '%s' er for langtar-medlemsstørrelse %jd er for stort<tom><ingen><ukendt>arkitektur '%s' er ulovlig: %sarkitektur '%s' er reserveret og kan ikke tilføjesarkivet '%.250s' indeholder to kontrolmedlemmer, opgiverarkivet '%s' indeholder et for tidligt medlem '%.*s' før '%s', opgiverarkivet '%s' indeholder ukendt komprimering for medlem '%.*s', opgiverarkivet indeholdt objektet '%.255s' med ukendt type 0x%xmedlemstørrelse for arkivkontrolarkivet har ugyldig formatversion: %sarkivet har forkert udformet størrelse for kontrolmedlem '%s'arkivet har ingen linjeskift i hovedethovedmedlem for arkivinformationarkivet er i formatversion %d.%d; hent en nyere dpkg-debmagisk versionsnummer for arkivhoved for arkivmedlemnumre for arkivdelforskydning for arkivdelarkivdelnummersamlet størrelse for arkivautotilstandautomatiske opdateringer af %s/%s er deaktiveret, lader den væreafventer udløserbehandling af en anden pakketom linje i værdi for feltet '%.*s'ødelagt på grund af mislykket fjernelse eller installationødelagt grundet efterinstallations-fejlkan ikke installere ukendt valg %skunne ikke køre 'mmap' på pakkeinformationsfil '%.255s'kan ikke slette gammelt 'postrm'-scriptkunne ikke finde pakkeinformationsfil '%.255s'kan ikke tilføje ar-medlemsfil (%s) til '%s': %skan ikke tilføje opdelt pakkedel '%s' til '%s': %skan ikke føje til '%s'kan ikke lukke udpakningsdatakanalkan ikke beregne MD5-hash for filen '%s': %skan ikke beregne MD5-hash for tar-fil '%.255s': %skan ikke konvertere multibye sekvens '%s' til et bredt tegnkan ikke konvertere multibyte-streng '%s' til en bred-tegnstrengkan ikke kopiere '%s' til arkiv '%s': %skan ikke kopiere '%s' til '%s': %skan ikke kopiere arkivmedlem fra '%s' til udpakningsdatakanal: %skan ikke kopiere udtrukket data for '%.255s' til '%.255s': %skan ikke omdirigere katalogerkan ikke omdirigere filen '%s' til sig selvkan ikke udtrække kontrolfil '%s' fra '%s': %skan ikke udtrække opdelt pakkedel '%s': %skan ikke indhente håndtag for sikkerhedsetiketteringkunne ikke åbne '%.255s' (i '%.255s')kan ikke åbne arkivdelfilen '%.250s'kan ikke åbne påmindelseskanal for sikkerhedsstatuskan ikke læse info-katalogkan ikke afinstallere '%.250s'kan ikke fjerne arkitektur '%s' aktuelt i brug af databasenkan ikke fjerne ikkefremmed arkitektur '%s'kan ikke slette gammel sikkerhedskopi af konfigurationsfilen '%.250s' (fra '%.250s')kan ikke slette gammel konfigurationsfil '%.250s' (= '%.250s')kan ikke slette gammel fillistekan ikke omdøbe '%s' til '%s'kan ikke tilfredsstille forhåndsafhængigheder for %.250s (ønsket grundet %.250s)kunne ikke gennemsøge kataloget '%.255s'kan ikke gennemsøge opdateringskataloget '%.255s'kan ikke se hvordan man kan tilfredsstille forhåndsafhængighed:
+ %skan ikke angive sikkerhedskontekst for filobjekt '%s'kan ikke angive konteksten til sikkerhedskørsel for vedligeholderscriptetkan ikke udelade arkivkontrolmedlem fra '%s': %skan ikke udelade arkivmedlem fra '%s': %skan ikke udelade fil '%.255s' (erstattet eller udeladt?) fra datakanal: %skan ikke udelade fyld for fil '%.255s': %skan ikke udelade opdelt pakkehoved for '%s': %skunne ikke finde '%.255s' (i '%.255s')kan ikke tilgå filen '%s'kan ikke zappe mulige afsluttende nuller fra dpkg-deb: %stegnet '%c' tillades ikke (kun bogstaver, tal og tegnene '%s' tillades)komprimerede data er ødelagtekonfigurationsfil '%.250s' optræder ikke i pakkenkonfigurationsfil '%.250s' kan ikke tilgåskonfigurationsfil '%s' er ikke en almindelig filvisualiseringsprogram for forskel i konfigurationsfil (conffile)konfigurationsfilnavnet '%s' afsluttes med mellemrumkonfigurationsfilnavnet '%s' findes flere gangekonfigurationsfilnavn '%s' er for langt eller mangler afsluttende linjeskiftskal for konfigurationsfil (conffile)konfigurationsfejl: %s:%d: %smodstridende handlinger -%c (--%s) and -%c (--%s)modstridende omdirigeringer, der involverer '%.250s' eller '%.250s'modstridende pakker - installerer ikke %.250sovervejer at afkonfigurere %s, som ville være i konflikt med %s ...overvejer afkonfigurering af den essentielle
+ pakke %s for at muliggøre %sovervejer at afinstallere %s til fordel for %s ...kontrolkataloget har forkerte rettigheder %03lo (skal være >=0755 og <=0775)kontrolkatalog er ikke et katalogkontrolfil '%s' findes ikkekontrolfilen '%s' for pakke '%s' indeholder et tomt filnavnkontrolfil '%s' for pakke '%s' mangler afsluttende linjeskiftkontrolfilen indeholder %ckontrolmedlemødelagt formatfil for informationsdatabase '%s'kunne ikke åbne loggen '%s': %skunne ikke tilgå den gamle fil '%.250s', så den slettes ikke: %skunne ikke åbne '%i' for strømnuværende alternativ %s er ukendt, skifter til %s for lænkegruppen %sder blev fundet en cyklus ved udløserbehandling:
+ kæde af pakker, hvis udløsere kan have forårsaget den:datamedlemafhængighedsproblemer - efterlader udløsere ubehandletafhængighedsproblemer - efterlader den ukonfigureretafhængighedsproblemer - afinstallerer ikkeafhængighedsproblemer forhindrer konfiguration af %s:
+%safhængighedsproblemer forhindrer behandlingsudløsere for %s:
+%safhængighedsproblemer forhindrer afinstallation af %s:
+%sforkaster forældet slavelænke %s (%s)omdirigeret af %s fra: %s
+omdirigeret af %s til: %s
+omdirigering af %s gennem %somdirigeret af %s til %s gennem %somrokér-til må ikke indeholde linjeskiftomdirigeret af %s til %s
+færdig
+nedgraderer %.250s fra %.250s til %.250sdpkg ikke registreret som installeret. Kan ikke kontrollere for %s-understøttelse!
+gentaget ventet udløserpakke '%.255s'gentaget fil-udløser-interesse for filnavnet '%.250s' og pakken '%.250s'gentaget sti %sgentaget forestående udløser '%.255s'slavelænke-duplet %sduplet for slavenavn %sværdi for '%s'-feltet optræder mere end én gangværdi for brugerdefineret felt '%.*s' optræder mere end én gangtomt feltnavntom streng fra 'fgets' under læsning af konfigurationsfilertomme udløsernavne er ikke tilladtepokenepoke i version er negativepoke i version er ikke et talepoke i version er for storfejlfejl under tjek af '%s'fejl under lukning af %.250sfejl ved lukning af konfigurationsfil '%.255s'fejl under lukning/skrivning '%.255s'fejl under oprettelse af enhed '%.255s'kunne ikke oprette kataloget '%.255s'fejl under oprettelse af hård lænke '%.255s'fejl under oprettelse af ny sikkerhedskopifil '%.s'fejl under oprettelse af datakanal '%.255s'fejl under oprettelse af symbolsk lænke '%.255s'kunne ikke sikre, at '%.250s' ikke eksisteretfejl ved tilbagekaldet '%s', fejlkode %dfejl ved formatering af streng ind i varbuf-variabelfejl i show-format: %sfejl under installation af ny fil '%s'fejl ved åbning af filen conffilesfejl ved åbning af konfigurationskatalog '%s'fejl under behandling af arkivet %s (--%s):
+ %sfejl under behandling af pakken %s (--%s):
+ %sfejl ved læsning af %.250skunne ikke læse %s fra filen %.255sfejl ved læsning af filen conffilesfejl ved læsning fra datakanal for dpkg-debfejl ved læsning af udløserudsættelsesfilen '%.250s'fejl ved fjernelse af gammel sikkerhedskopifil '%s'fejl ved indstilling af ejerskab for '%.255s'fejl under indstilling af ejerskab af symbolsk lænke '%.255s'fejl ved indstilling af filrettigheder for '%.255s'fejl ved indstilling af tidsmærker for '%.255s'fejl ved forsøg på at åbne %.250sfejl ved blokering af signal %s: %s
+fejl under skrivning af '%s'fejl under skrivning af '%s'fejl under skrivning til '%s'fejl under skrivning til arkitekturlistefejl ved skrivning til standardfejl, opdaget inden konfigurationsfil-promptkan ikke allokere hukommelsekunne ikke frigøre hukommelse til ny indgang i listen over mislykkede pakker: %skunne ikke skifte katalog til '%.255s'kunne ikke skifte til katalogkunne ikke skifte filrod til '%.250s'kunne ikke lukke efter læsning: '%.255s'kunne ikke oprette katalogkunne ikke oprette datakanal (pipe)kunne ikke 'dup' for fd %dkunne ikke udføre 'dup' for std%skunne ikke køre fstat på ar-medlemsfil (%s)kunne ikke køre 'fstat' på arkivetkunne ikke køre 'fstat' på omdirigeringsfilkunne ikke køre 'fstat' på 'statoverride'-filkunne ikke oprette midlertidig fil (%s)kunne ikke åbne konfigurationsfil '%.255s' til læsning: %skunne ikke åbne omdirigeringsfilkunne ikke åbne pakkeinformationsfil '%.255s' for læsningkunne ikke åbne statoverride-filkunne ikke åbne udløser-interesselistefil '%.250s'kunne ikke læsekunne ikke læse '%.255s' (i '%.255s')kunne ikke læse arkivet '%.255s'kunne ikke slette indlemmet opdateringsfil %.255skunne ikke slette min egen opdateringsfil %.255skunne ikke hoppe tilbage i midlertidig fil (%s)kunne ikke spole udløser-interessefil '%.250s' tilbagekunne ikke seekkunne ikke følge den eksisterende symbolske lænke '%.250s'kunne ikke følge det foreslåede mål `%.250s' for den symbolske lænke `%.250s'kunne ikke køre (stat) midlertidig fil (%s)kunne ikke slette lænke til midlertidig fil (%s), %skunne ikke skrivekunne ikke skrive %s-indgang om '%.50s' til '%.250s'kunne ikke skrive detaljerne om '%.50s' til '%.250s'kunne ikke skrive filnavn til tar-datakanal (%s)fgets gav en tom streng fra '%.250s'feltnavn '%.*s' kan ikke starte med bindestregfeltnavn '%.*s' skal efterfølges af et kolonfeltbredde er uden for intervalfilen '%.250s' har ugyldig formatversion: %sfilen '%.250s' er ødelagt - %.250s manglerfilen '%.250s' er ødelagt - ugyldig MD5-checksum '%.250s'filen '%.250s' er ødelagt - ugyldig arkivhovedmagifilen '%.250s' er ødelagt - ugyldigt arkivdelnummerfilen '%.250s' er ødelagt - ugyldigt ciffer (kode %d) i %sfilen '%.250s' er ødelagt - ugyldigt magisk nummer i slutningen af første hovedfilen '%.250s' er ødelagt - ugyldigt magisk nummer i slutningen af andet hovedfilen '%.250s' er ødelagt - ugyldigt antal arkivdelefilen '%.250s' er ødelagt - ugyldigt udfyldningstegn (kode %d)filen '%.250s' er ødelagt - manglende linjeskift efter %.250sfilen '%.250s' er ødelagt - ingen skråstreg mellem arkivdelnumrefilen '%.250s' er ødelagt - nuller i informationsafsnittetfilen '%.250s' er ødelagt - andet medlem er ikke datamedlemfilen '%.250s' er ødelagt - størrelsen er forkert for nævnt delnummerfilen '%.250s' er ødelagt - for kortfilen '%.250s' er ødelagt - forkert antal dele for de oplyste størrelserfilen '%.250s' har formatversion %d.%d; hent en nyere dpkg-splitfilen '%.250s' er ikke en arkivdelfilen '%s' er ødelagt; heltal uden for interval i %sfilen '%s' er ingen arkivdel
+filformatet er ikke genkendtfilen ser ud til at være et arkiv, der er blevet
+ ødelagt af at blive hentet i ASCII-tilstandfilen må ikke indeholde linjeskiftfortegnelsen af filudløsere nævner ugyldigt pakkenavn '%.250s' (til interesse i filen '%.250s'): %.250sfilenavnet "%s" er ikke absolutfilerne '%.250s' og '%.250s' er ikke dele af samme filfillistefilen for pakken '%.250s' indeholder tomt filnavnfillistefilen for pakken '%.250s' mangler afsluttende linjeskiftfillistefilen for pakken '%.250s' mangler; antager at pakken ikke har nogen filer installerettvinger ominstallation af alternativet %s, da lænkegruppen %s er ødelagtprocesspaltning mislykkedesformatversion efterfulgt af affaldformatversion har intet punktumversionsnummer for formatformatversion med tom hovedkomponentformatversion med tom mindre komponentgenererede ødelagt ar-hoved for '%s'hoved er for langt, hvilket gør delen for lang; pakkenavnet eller
+versionsnumrene må være ekstraordinære lange, eller noget andet; giver opignorerer %d advarsel om kontrolfilerignorerer %d advarsler om kontrolfilerignorerer skade, kan fortsætte alligevel!ignorerer konflikt, kan fortsætte alligevel!ignorerer afhængighedsproblem med %s:
+%signorerer forhåndsafhængighedsproblem!ignorerer ønsket om at fjerne %.250s, som ikke er installeretignorerer ønsket om at fjerne %.250s. Kun konfigurations-
+filerne er på systemet; brug --purge for også at fjerne disseugyldigt arkitekturnavn i specifikation '%s:%s': %sugyldigt afventet pakkenavn '%.250s': %.250sugyldigt pakkenavn på linje %d: %.250sugyldigt pakkenavn i ventet udløser '%.255s': %sugyldigt pakkenavn i specifikation udløser '%s%s%s': %sugyldigt navn på ventende udløser '%.255s': %sformat for informationsdatabasen (%d) er fejlbehæftet eller for ny; prøv at få fat i en nyere dpkginformationsfilen %s/%s er ikke associeret til nogen pakkeinstallation af %.255sinstalleretinstallation af %.250s ville være i konflikt med %.250s, og
+ dekonfiguration er ikke tilladt (--auto-deconfigure kan hjælpe)installation af %.250s ville være i konflikt med eksisterende programmerintern fejl (fejl)ugyldigt tegn '%c' i arkiv '%.250s' medlem '%.16s' størrelseugyldigt tegn '%c' i feltbreddenugyldigt tegn i revisionsnummerugyldigt tegn i versionsnummerugyldigt komprimeringsniveau for -%c: '%ld'ugyldig komprimeringsparameter: %sugyldig formatversion for deb: %sugyldigt heltal for --%s: '%.250s'ugyldig eller ukendt syntaks i udløsernavn '%.250s' (i udløser-interesser for pakken '%.250s')ugyldigt pakkenavn '%.250s' i udløserudsættelsesfilen '%.250s'ugyldig statusugyldigt udløsernavn '%.250s': %.250slinje ikke afsluttet ved forsøg på at læse %slinje for lang eller uafsluttet ved forsøg på at læse %slænken %s er både primær og slavelokal omrokering fra: %s
+lokal omdirigering af %slokal omdirigering af %s til %slokal omdirigering til: %s
+lokalt omdirigeret til: %s
+lange filnavneden pakkeansvarliges script '%.50s' har dårlige filrettigheder %03lo (skal være >=0555 og <=0775)den pakkeansvarliges script '%.50s' er hverken en almindelig fil eller symbolsk lænkeden pakkeansvarliges script '%.50s' kan ikke tilgåsmalloc mislykkedes (%zu byte)manuel tilstandhovedfilhovedlænkekan få problemer med at afinstallere %s, da den giver %s ...må ikke være en tom strenggrænse for hukommelsesforbrug nåetmodstrid i omrokér-til
+  under afinstallation af '%s'
+  fandt '%s'modstrid i pakke
+  under afinstallation af '%s'
+  fandt '%s'manglende slutkantparentesblandede ikkesamtidige og samtidige installerbare pakkeinstanser er til stede; højst sandsynlig på grund af en opgradering fra en uofficiel dpkgflerarkitekturflere Conflicts og Replacesflere ikkesamtidige installerbare pakkeinstanser er til stede; højst sandsynlig på grund af en opgradering fra en uofficiel dpkgder er flere statusomgåelser til stede for filen '%.250s'skal kaldes fra et vedligeholderscript (eller med tilvalget --by-package)skal starte med alfanumerisk tegnskal starte med et alfanumerisk tegnnavnet %s er både primær og slavekræver et handlingstilvalglinjeskift i feltnavn '%.*s'linjeskift er ikke tilladt i update-alternatives-filer (%s)ingen alternativer til %sder er ingen omgåelseringen pakkeinformation i '%.255s'ingen pakke med navnet '%s' installeret, kan ikke konfigurereingen pakker fundet der matcher %singen pakker fundet der matcher mønster %snej, %s er essentiel, vil ikke afkonfigurere
+ den for at muliggøre %snej, kan ikke fortsætte med %s (--auto-deconfigure vil hjælpe):
+%skontrollerer ikke indhold af kontrolområdeikke installeretikke installeret, men konfigurationen bestårfjerner ikke %s da det ikke er en symbolsk lænkeerstatter ikke %s med en lænkeintet efter kolon i versionsnummernull-pakkenavn i --%s kommaadskilt liste '%.250s'antal arkivdeleforældet tilvalg '--%s'; utilgængelige pakker ryddes automatiskgammel konfigurationsfil '%.250s' var et tomt katalog (og er nu blevet slettet)den gamle fil '%.250s' er den samme som adskillige nye filer! (både %.250s' og'%.250s')den gamle version af pakken har et overdrevet langt filnavn, der starter med '%.250s'kun eksakte versioner må benyttes til '%s'-feltetåbning af komponent '%.255s' (i %.255s) mislykkedes på en uventet mådeløb tør for hukommelse til ny oprydningsindgangløb tør for hukommelse til ny oprydningsindgang med mange argumenterløb tør for hukommelse til ny fejlkontekstundertrykker problemet, fordi --force er givet:pakken %.250s er allerede installeret og konfigureretpakken %.250s ikke klar til konfiguration
+ kan ikke konfigurere (nuværende status '%.250s')pakken %.250s ikke klar til udløserbehandling
+ (nuværende status '%.250s' uden ventende udløsere)pakken %s %s kan ikke konfigureres, da %s er på en anden version (%s)pakken %s kan ikke konfigureres, da %s ikke er klar (nuværende status '%s')pakken %s indeholdt en liste som informationsfilpakken %s kræver geninstallation, men afinstalleres efter dit ønske alligevelpakken %s kræver geninstallation, afinstalleres ikkepakken %s var tilbageholdt, behandler den alligevel, efter dit ønskepakken '%s' er ikke tilgængeligpakken '%s' er ikke installeretpakken '%s' er ikke installeret og der er ingen tilgængelig informationpakkearkitekturpakkearkitekturen (%s) passer ikke til systemet (%s)pakken indeholder et overdrevet langt informationsfilnavn (starter med '%.50s')pakkekontrolinformation indeholdt kataloget '%.250s'pakkekontrolinformation 'rmdir' af '%.250s' påstod, det ikke er et katalogudtræk af pakkekontrolinformationpakke omdirigerer andre til: %s
+værdiudtrækning for pakkefeltpakkefils MD5-tjeksumarkivudtrækning for pakkefilsystempakke har status %s, men der afventes udløserepakke har status %s, men der er ventende udløserePakken er i en meget dårlig, inkonsistent tilstand; du bør
+ geninstallere den inden du forsøger at afinstallere den.Pakke er i en meget inkonsistent tilstand - du burde
+ geninstallere den, før du forsøger konfiguration.pakke må ikke indeholde linjeskiftpakkenavnpakkenavnet har tegn, der hverken er små bogstaver, tal eller '-+.'verificering af pakkeunderskriftversionsnummer for pakkedel %d manglerdelfilen '%.250s' er ikke en almindelig fildelen er alt for stor, eller størrelsen er ikke positivdelstørrelsen skal mindst være på %d KiB (for at få plads til hoved)godkendt
+indsætsti må ikke indeholde linjeskiftforhåndsafhængighedsproblem - installerer ikke %.250sprioritetprioritet er uden for intervalprioritet skal være et heltalprioritet for %s er uden for interval: %sprioritet for %s: %slæsefejl i %.250slæsefejl i '%.250s'læsefejl i konfigurationsfil '%.255s'læsefejl fra standard-inddatalæsefejl på standard-ind ved konfigurationsfil-promptlæser pakkeinformationsfil '%.255s'læser pakkeinformationsfil '%s': %slæser statoverride-fil '%.250s'genskabte pakkefilenvedrørende %s, der indeholder %s, forhåndsafhængighedsproblem:
+%svedrørende %s, der indeholder %s:
+%safinstallation af %.250sfjerner arkitektur '%s' aktuelt i brug af databasefjerner manuelt valgt alternativ - skifter %s til automatisk tilstandomdøbning medfører overskrivning af '%s' med
+  anden fil `%s', ikke tilladtomdøb: fjern identisk gammel lænke '%s'den ønskede handling kræver superbrugerrettighederrm-kommando for oprydningsøgte, men fandt ingen pakker (filer, der matcher *.deb)<ukendt>sætter automatisk valg af %s opflere pakkeinformations-indgange fundet, kun én er tilladtskalkommando til at flytte filerspring oprettelse af %s over, den da tilknyttede %s (for lænkegruppen %s) ikke findesslavefilslavelænkeslavelænke er den samme som hovedlænken %sslavenavnkildefil '%.250s' ikke en almindelig filgensamling af opdelt pakkestatoverride-fil indeholder en tom linjestatoverride-fil mangler afsluttende linjeskiftstatusstatusloggerfjerner afsluttende /underproces %s returnerede afslutningsstatus %dstørrelse for symbolsk lænke '%.250s' ændret fra %jd til %zdsyntaksfejl i filudløserfil '%.250s'syntaksfejl i statoverride-filkræver et argument, udløsernavnetmålet er et katalog - kan ikke overspringe kontrolfil-tjekder er flere versioner af del %d - i hvert tilfælde '%.250s' og '%.250s'der er intet script i den nye version af pakken - giver opdette er en essentiel pakke; den bør ikke afinstalleresfor at gå tilbage til automatiske opdateringer så brug '%s --auto %s'for mange fejl, stopperfor lang linje eller manglende linjeskift i '%.250s'syntaksfejl i udløser-interessefil '%.250s'; ugyldigt pakkenavn '%.250s': %.250sudløsernavn indeholder ugyldigt tegnudløserfortegnelser findes endnu ikkeudløstudløser-ci-fil '%.250s' indeholder ulovlig udløsersyntaks i udløsernavn '%.250s': %.250sudløser-ci-fil indeholder ukendt direktiv '%.250s'udløser-ci-fil indeholder ukendt direktivsyntaksdatakatalog for udløsere endnu ikke oprettetudløsere er cyklisk afhængige, afbrudtforsøger i stedet script fra ny pakke ...forsøger at overskrive '%.250s', som også er i pakken %.250s %.250sforsøger at overskrive '%.250s', som er den omdirigerede version af `%.250s'forsøger at overskrive '%.250s', som er den omdirigerede version af '%.250s'(pakke: %.100s)forsøger at overskrive kataloget '%.250s' i pakken %.250s %.250s med ikke-katalogforsøger at overskrive delt '%.250s', som er forskellig fra andre instanser af pakken %.250sto kommandoer angivet: --%s og --%skunne ikke (gen)åbne inddata-delfil '%.250s'kan ikke ændre ejerskab af målfilen '%.250s'kunne ikke kontrollere eksistensen af '%.250s'kan ikke kontrollere låsestatus for filen '%s'kunne ikke kontrollere eksistensen af arkivet '%.250s'kunne ikke ændre ejerskab af symbolsk lænke for '%.255s'kunne ikke rydde op i rodet omkring '%.255s', inden jeg installerede en anden versionkan ikke lukke filen '%s'kan ikke lukke ny fil '%.250s'kan ikke lukke ny udløserudsættelsesfil '%.250s'kunne ikke lukke opdateret status for '%.250s'kunne ikke oprette '%.255s'kan ikke oprette '%.255s' (under behandling af '%.255s')kan ikke oprette filen '%s'kan ikke oprette ny fil '%.250s'kan ikke oprette midlertidigt katalogkan ikke oprette udløsertilstandskatalog '%.250s'kunne ikke slette kontrolinformationsfilen '%.250s'kan ikke slette gammelt katalog '%.250s': %skunne ikke slette opbrugt depotfil '%.250s'kunne ikke slette '%.250s'kunne ikke køre %s (%s)kunne ikke efterfylde %.250skunne ikke tømme %.250s efter efterfyldningenkan ikke tømme til filen '%s'kan ikke tømme ny fil '%s.250s'kunne ikke tømme opdateret status for '%.250s'kunne ikke køre 'fstat' på kildefilkunne ikke synkronisere opdateret status for '%.250s'kunne ikke indhente fildeskriptor for mappe '%s'kan ikke ignorere signal %s før kørsel af %.250skunne ikke installere '%.250s' som '%.250s'kunne ikke installere (antaget) ny informationsfil '%.250s'kunne ikke installere ny informationsfil '%.250s' som '%.250s'kan ikke installere ny udløserudsættelsesfil '%.250s'kunne ikke installere ny version af '%.255s'kunne ikke installere opdateret status for '%.250s'kan ikke låse %skunne ikke oprette sikkerhedskopi af lænke til '%.255s' inden installationen af en ny versionkunne ikke oprette sikkerhedskopi af symbolsk lænke for '%.255s'kunne ikke flytte '%.255s' væk for at installere en ny versionkan ikke åbne '%.255s'kan ikke åbne mappe '%s'kan ikke åbne filen '%s'kunne ikke åbne ny depotfil '%.250s'kunne ikke åbne uddata-fil '%.250s'kunne ikke åbne kildefil '%.250s'kunne ikke åbne midlertidigt kontrolkatalogkan ikke åbne udløser-ci-fil '%.250s'kan ikke åbne udløserudsættelsesfilen '%.250s'kan ikke åbne/oprette ny udløserudsættelsesfil '%.250s'kunne ikke læse depot-katalog '%.250s'kan ikke læse filudløserfil '%.250s'kunne ikke læse fildeskriptor-flag for %.250skunne ikke læse lænken '%.255s'kunne ikke læse delfil '%.250s'kunne ikke fjerne '%s'kan ikke fjerne sikkerhedskopi af '%.250s'kan ikke fjerne kopieret kildefil '%s'kan ikke slette nyudpakket version af '%.250s'kan ikke slette nyinstalleret version af '%.250s'kunne ikke slette nyinstalleret version af '%.250s' for at tillade geninstallation af sikkerhedskopikunne ikke slette forældet informationsfil '%.250s'kunne ikke omdøbe den ny depotfil '%.250s' til '%.250s'kunne ikke genåbne delfilen '%.250s'kunne ikke genskabe sikkerhedskopi-version af '%.250s'kan ikke på sikker vis fjerne '%.250s'kan ikke på sikker vis fjerne '%.255s'kan ikke på sikker vis fjerne den gamle fil '%.250s': %skunne ikke søge til starten af %.250s efter efterfyldningenkunne ikke aktivere mellemlagring for %s-databasefilkan ikke sætte flaget 'close-on-exec' for %.250skunne ikke sætte eksekveringsrettigheder for '%.250s'kan ikke ændre tilstand for målfilen '%.250s'kan ikke setenv til vedligeholderscriptkan ikke setenv for underprocesserkunne ikke finde %s '%.250s'kunne ikke tilgå %s '%.250s': %skunne ikke finde '%.250s'kan ikke tilgå kontrolkatalogkan ikke tilgå den installerede medsendte konfigurationsfil '%.250s'kan ikke tilgå ny distribueret konfigurationsfil '%.250s'kunne ikke tilgå den anden ny fil '%.250s'kan ikke tilgå genskabt '%.255s', inden jeg installerede en anden versionkan ikke tilgå kildefil '%.250s'kan ikke tilgå udløserudsættelsesfilen '%.250s'kan ikke synkronisere mappe '%s'kan ikke synkronisere fil '%.255s'kan ikke synkronisere filen '%s'kan ikke synkronisere ny fil '%.255s'kunne ikke klippe for opdateret status for '%.250s'kunne ikke låse %s opkan ikke skrive filen '%s'kan ikke skrive ny fil '%.250s'kan ikke skrive ny udløserudsættelsesfil '%.250s'kan ikke skrive til status-fd %dkunne ikke skrive opdateret status for '%.250s'ubalancerede anførselstegn i '%s'uventet bzip2-fejluventede data efter pakke og valg på linje %duventet slut-på-fil i %s i %.255suventet filafslutning eller strømfilen sluttede uventet ved forsøg på at læse %suventet inddataafslutninguventet linjeafslutning efter pakkenavn på linje %duventet linjeafslutning i pakkenavn på linje %duventet linjeafslutning i statoverride-filukendt parameter '%s'ukendt komprimeringsstrategiukendt komprimeringsstrategi '%s'!ukendt komprimeringstype '%s'!ukendt formatversion for deb: %sukendt gennemtvingnings/afvisnings-tilvalg '%.*s'ukendt tilvalg '%s'ukendt tilvalg -%cukendt tilvalg --%sVerifikationsuddataformatet '%s' er ukendtukendt ønsket status på linje %d: %.250sudpakket, men ikke konfigureretikke understøttet forhåndsindstilling for komprimeringikke understøttet komprimeringstype '%s' med ensartet komprimeringikke understøttede indstillinger i filhovedikke understøttet type for integritetskontrolopdateringskataloget indeholder filen '%.250s', hvis navn er for langt (længde=%d, max=%d)opdateringskataloget indeholder filer med forskellige navnelængder (både %d og %d)opdaterer alternativet %s, da lænkegruppen %s har ødelagt slave-lænkerfor kort brugerbestemt feltnavn '%.*s'bruger %s til at give %s (%s) i automatisk tilstandbruger %s til at give %s (%s) i manuel tilstandværdien for '%s'-feltet har en linje med ugyldigt format '%.*s'værdi i feltet '%s' er ikke tilladt i denne sammenhængverifikation af pakke %s mislykkedes!verifikation af %s mislykkedes; men installerer alligevel, efter dit ønske<ingen>version %.250s af %.250s er allerede installeret, springer overversionsnummer starter ikke med cifferversionsstreng indeholder mellemrumversionsstreng er tomversioneret Providesafventning af underprocessen %s mislykkedesadvarselved læsning af %s: %sved fjernelse af %.250s var kataloget '%.250s' ikke tomt - fjernes ikkekunne ved afinstallation af %.250s ikke fjerne kataloget '%.250s': %s - kan kataloget være et monteringspunkt?vil ikke nedgradere %.250s fra version %.250s til %.250s, springer overja, vil afkonfigurere %s (ødelagt af %s)ja, vil afinstallere %s til fordel for %sdu skal angive pakker ved deres egne navne, ikke ved de filnavne, de ligger i
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/de.gmo dpkg-1.20.7.1/po/de.gmo
--- dpkg-1.20.7.1-orig/po/de.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/de.gmo	2021-06-09 18:25:14.446502652 -0500
@@ -0,0 +1,1159 @@
+����$�HXa?Yaa�a �akb��b�Pc&�c=�c&6d]d-qe.�e�e.�ef *f4Kf�f5�f-�f.g0/g1`g$�g4�g/�ghq4h(�h$�h�hi:4i6oi1�i1�i!
+j2,j(_j�j�j!�j�j�j
+kk.*kYkSek�k�k�k9lm;l)�l:�l9m.Hm'wm&�m�m3�m5nFnLnPYn\�nvo[~oU�o0pEpVpcpxpZ�p�p�p�q�q=�q%r:r-Kr+yr�r)�r�r#�r/ sPsTes8�s��s4�u=vRBv1�vD�vLwAYw'�w&�w(�w'x+;x4gx!�x,�x9�x-%ySy#qy�y$�y�y �y"z:z!Xz#zz�z�z�z�z�z"{22{1e{/�{'�{�{.|5|<P|�|-�|R�|H(}Qq}A�}e~fk~I�~/HL7�<�7
+�B�(U�B~���؀�
� �5�5N�1��@��0��(�*H�s���#��!��K�7j�5��-؃� �!<�^�'x�-��-΄ ��5�S� s���"��!υ"�!�$6�,[�.��.��.��H5�6~�(��>އ$� B�c����������V�c�#z�:��-ي��)�;�*H�<s�#��-ԋ-��0�Ō�Ҍ]�5t����[��������\����g��
&�4�L�(e�-����8ؤ<�.N�}�0��3ť1��+�8�S��_�0�1E�*w�J��2��� �&ũ/�2�EO�V���5�.;�7j�-��+Ы/��
,�%:�/`�*��&��!�+�B0�]s�ѭ!֭���M���1��2)��\���� ��dŴ'*��R�G��!2�"T�w�4��.��2��5-�3c���G��8��,(�U�(t�������G���3!�)U�$�:����,��V� s�����*�����"�&>�3e�-��+��?��3�,E�	r�|���*������ �H)�r��y��J�g��je�������4y�5���������w�u#�&��A��{�!~�,��*��.��'��F���� N�5o��� ��,��$
+�#/�JS�.��>��*�;7�,s�#��L��>��P�����;���u!����"p�������9��(��X�3t�?��8��2!�1T�,��:��4��5#�#Y�4}�,��A��1!�MS�-������#��!�>�[�p��� ��1��%��8�?M�"��B��6��*�5F�&|�.��!��!��5�L�i��������	��9��.�#C�g�,����$�����%7�]�%|���-��1���3�)R�1|�:��?��&)�P�=m�7��+��)�#9�]� x�,��+����!�..�*]�7��#��1���"%�&H�o���0����:���4�@K�+��;��3��(�E�A`���&��-��#�0:�;k�0��(��?�)A�-k���"��������#�!7�4Y�E������,�"3�!V�7x�?����$�54� j�.��8��%���(�-G�5u�,��B��B�B^�+��G��$� :�:[�;��3��=�D�]�&l�/����7���D5�cz���1��2�*O�"z�3��:��-�(:�&c���������"���W(���(������=��*�J>���"��������-
<; x�)�%��#@9@z'��� ?[au)���!�!#6Z%w%�'�,�1P*m'�'��!� <-]#�#�+�%�$%J f����"�:?FY���$�6Ld#|��!�"�:	X	5w	 �	2�	
+%
+6
+0V
+*�
+$�
+/�
+6VM"�(��<.=)l(�*�+�
,2
)_
4�
3�
2�
4%;Z<�6�:
+7E@}0�;�?+$kA�=�>$O0t!��b�Ecc�:�< =]_�#�Hht��)�)�++D�p$+Pj���\&w&�'� �7tF2�-�'4D.y)�G�-H	_ik�/�$3>H%�$�#�&�!?!^"�^�@&Cj����!�)Hf(�%��+�79I!�*�(�� ) E ] v O� 8� *!9!S!_!k!3w!�!�!7�!5"L"_"|u"
+�"�"m#0�#G�#$)$$!N$Mp$�$�$�$3
+%$>%5c%%�%�%�%"�%4
&B&!`&C�&C�&=
+'%H'on'
�' �'(
(6(%S(7y(�(�(I�(.,)6[)!�)�)�)G�)P,*G}*.�*?�*#4+7X+#�+�++�+2,Y3,f�,L�,hA-M�-&�-K.3k.=�.�.�.=/W/4l/(�/F�/10;C0&0�0�0�0%�0/$12T18�1-�1-�1.2.K2az2e�2 B3c3 p3D�3?�3454L4%_4.�4�4&�4-�475T5n5v5|5T�5.�56'6@6"\662�6�6�6)�67&87"_7"�7"�7�76�78787I8B�8H�8&
9"49(W90�9<�9O�9>:W::n:6�:%�:;$;4=;r;�;O�;
+�;
+<<
+2<%=<c<%|<*�<�<
�<�<+�<7#=+[=!�=M�=$�=4>FQ>@�>%�>5�>65?1l?A�?�?,�?B'@,j@#�@R�@ A'/A$WA	|AZ�A4�A2B'IBqB�B.�BD�BGCY`CQ�C^D%kD+�DG�D/E25E%hE%�E1�E8�E+FNKF�F!�F3�F*
+G5G5OG�G"�G$�G2�G+H+GH,sH�H�H"�H$�HI!7I*YI�I*�I0�I0�I&-J3TJ4�J5�J)�J,KJKD\K*�K4�KLL7L&PL#wL#�L%�L(�L.M>=M9|M9�M1�M""N'EN*mN.�N�N�N!O%O(;O(dO4�O4�O[�O,SP4�P#�P,�P"Q")Q/LQ/|Q+�Q+�Q-R*2R&]R!�R�R�R�R9�R 2S2SS0�S&�SB�S#!T.ETtT�T�T �T1�TU/U!IU3kU�U*�U�UV6V4RV,�V&�V1�V 
W'.W.VW�W4�W1�W+X#0XTXjX"�X�X�X#�X"Y/YCYVY�jY�,Z�Z!	[(+[T[#p[$�[$�[(�[\:&\"a\#�\S�\M�\EJ]�](�](�]*�]:&^.a^0�^"�^I�^._4=_r_�_(�_�_"�_`*`=`[`y`�`B�``�`9:ata'�a#�aA�a`bxzbP�cuDd'�d��d�de�Rf,�fIg'ag8�g0�h3�h'i39i mi%�i;�i�i4j0Ej2vj2�j.�j&k:2k4mk�kt�k+4l(`l"�l!�lA�l>m8Om7�m(�m@�m;*nfn wn*�n�n�noo.$oSoJ_o�o$�o�oH�o�Hp<�pHqBQq<�q:�q2r?r9Rr=�r�r�rQ�r^2s��sm!tN�t�t�tuu
/uY=u�u�u��u�vO�v
+w'w:7w1rw&�w6�wx,x7Bxzx{�xR
+y�]yH8{V�{l�{DE|M�|U�|H.}6w}5�}5�}5~@P~C�~/�~>GD>��%� �(0�Y� v�$����#܀'�(�H�\�p�&��F��U��SK�7��+ׂ�: �[�<y���1҃T�HY�j��M
��[��ޅPj�4��J��A;�;}�<����>�EQ�����ˈ�!���7<�=t�P��F�#J�0n�����1Ҋ+�&0�%W�T}�Jҋ=�1[�����"Ɍ �-
�:;�:v�&��=؍"�$9�^�&~�%��&ˎ%�&�1?�8q�,��/׏(�M0�;~�5��I�+:�"f�*������đ�ޑ����.��[�2J�}�������+ӔF��)F�4p�4���ڕ������G6�~����+��:�		�����z�.�� *�K�/g�4��!̰B�D1�2v���.��3�A#�e�~�����3ųB��'<�Kd�;����.˶9��S4�j��f�Z�Hx�6��N��=G�'��7���1��+0�+\�+��!��+ֺM�iP���(����_���7�>V�������XU�	��.���������a�%��%�E6�*|�C��@��3,�`�nw�A��'(�*P�0{�����&��l��
+Z�@e�1��,��<�B�3U�Y��$�� � )�,J�w���*��,��9�O:�0��T���4(�]�"e���-��'��-��/+�L[���������oj�s���N��C�.1�8`�����}��U��)�/��H���G�$��;�2C�5v�.��������+5�@a���%��T��$8�#]�K��B��R�9c�m��9�1E�Xw�L���������<����������?��������r��9m�j��>�KQ�D��A��@$�2e�A��:��A�&W�:~�6��F��77�Yo�3�����./�#^� ��������$��D��((�9Q�G��(��O��:L���4��'��@�4C�%x�E����-?QfOz7�(#+IO�,�#�3=;/y?�3�@O^&�/�:B@J�U�5$0ZL�R�=+8i3�)�7<8:u-�9�@EYL�8�D%	j	6�	7�	.�	$'
+IL
+�
+W�
+*%6S\:�[�MG+�,�X�3G
;{
:�
:�
B-JpM�D	ZNA�V�'B?j-�+�479;qH�M�#Dh,�;�,�<GX�(�6�+ 0LB}$���5>J4�X�\\t>�R(c$�A�N�4B<w��.�'
85\n4�LuM�?�61G,y:�A�6#DZ,���8=vr�Q
_u_�,�Og(y���5�W( � � 5� %� ! (!VI!P�!A�!3";"!Z"$|""�"�"#�"!�"9#/K#*{#1�#/�#4$'=$5e$:�$4�$;%G%/c%'�%;�%1�%1)&[&)x&%�&'�&<�&6-'2d'F�'4�'1(&E(3l(�( �( �( �(*)[E) �)X�)4*)P*%z*4�*+�*!+*#+N+;l+-�+6�+8
,3F,Gz,+�,?�,-.-D\-�-3�-*�-=.7].7�.C�./X//|�/<04B0"w0K�0D�0;+15g1;�12�1+2182*j2?�2?�263<L3J�3K�3< 4A]4B�4O�4425Cg5I�5%�5O6Qk6E�6%7D)7)n7�7Y�7/8n<8"�8B�8C9PU9y�9+ :OL:�: �:#�:�:(;(4;,];,�;��;.�<�<�<=�(=o�=F&>Bm>/�>)�>N
+?�Y?:�?:,@)g@:�@5�@2A^5A'�A�A�A(�A~
BA�B�B�BN�B(CC&lC%�C/�C"�C!D(.D)WDi�DN�D(:EcE!�E�E�E"�E+�E$%F&JF(qF$�F.�F*�FG-(G:VG@�G)�G0�G.-H\HvH�H�H�H�HW�HLGI@�I �I�IJJEJ"eJ!�J\�JNKVK)lK��K
+FL#QL�uL8MT?M*�M*�M)�MYN"nN �N$�N<�N/OBDO*�O�O�O&�ODP%QP+wPZ�PZ�PKYQ6�Q��QhR8zR/�R&�R+
+S96SpS �SR�SA�SK=T$�T�T �TP�Tg:UY�U<�UR9V,�VB�V*�V&'W6NW3�Wn�Wm(XX�X{�XYkY&�YM�Y<:ZCwZ!�Z"�ZJ[K[2\[$�[T�[2	\S<\$�\�\�\�\"]2.]0a]3�]7�]6�]15^0g^��^�_/�_	�_"�_K`OP`�`�`�`-�`6a
Sa1aa1�a=�a b
+$b	/b*9bidb9�b
+c+c"?c6bc�c3�c�c�c,d">dIad$�d$�d'�d!e@?e&�e�eF�eQfYUf2�f'�f-
+g18gAjgy�g&h?hKXhC�h(�hi-i7Ki&�i�ih�i3j
+?j)Jj
+tj2j(�j'�j:k>kEk"Rk-ukH�k-�k"lY=l3�lL�lWm>pm(�mB�mBnT^nH�n�n:oGPo:�o'�o\�o$Xp(}p)�p
+�p_�p8;q4tq,�q�q(�q8rNQrY�ri�r]ds{�s%>tAdtw�tCu@bu9�u:�u=vOVvY�v^w*_w3�wM�wBx%OxRux'�x0�x5!y?Wy=�y<�y?z&Rz%yz$�z7�z1�z:.{Ii{0�{E�{A*|@l|7�|H�|G.}Mv}9�}B�}A~__~I�~R	&\.�(�7�3�1G�;y�6��F�V3�V��T�B6�4y�6��7�A�)_�+��.��!�<�5C�By�E����:��E��7�E<�7��7��F�A9�>{�@��;��D7�N|�Mˈ2�6L�/��X��8�NE�G��A܊n�:��Oȋ3�1L�-~�6��I�-�*L�3w�M��<��B6�,y���4��2��,(�&U�0|�0��0ޏ0�@�3^�1��-Đ.�!�"=�*`�%��!��,ӑ'�(�A�W��n��X�#G�3k�1��!є(�0�0M�4~�1��M�)3�0]�a��]�ON���1��D�@5�Nv�@Ř9�*@�Wk�ÙC˙!�%1�-W���)��ǚ�-��)(�R�Z�`p��ћoX�Ȝ1��%�K8�q���8B.�NvyDjQ���RkcfLU���9�����cwk��!r�{��l��]5Q������k�7L����!���?O�6��RUno�����&>:~�e�oB���pb#�uigmO*�~(};$�P+����eWI vm�:��GiyB�d�P������wV����)��K;v���!���q�A��o�K`������W��Y��,��DC��8��p�_����L�5*- �J8�J�^3)4�����$X�<�D\#9�$�PU�OS�V��Zn��
+���G�����Y�f���F]-�$��p G\���E����f�~�m(�����5 ]�=����D��H�0t�w;���%����>7�ftd����V>�ls�����g�^4uQ|��7#Xm '��%��=���S�N���-���I��t�Y���	23.C	P":vO'	%^�{�y��z�tTUd�S��;,�bM�S��[y�	��7�c��r�o�A�~����rz������Xl�2����G�5a&Rc���k�5���<
�@����2�q0�g�KoF�A�9>�?��~Yp��Z!�����s[��+��K�.������Se.1��������_*��ps3��/��
+��7�2��iE��a�l;@Z]�h��Q[<����T��^�b�%-L�a��������FT}(�xT�h���rW
+����3n��C�T���&:-����k�e�uH�QR�<�]������VM�I@��{|�*)LB.�b)H�$!�N'B(�g��������|�M��M"aqd�y��\�������:\��#�	�N��1�6�"E
+�n���G�H\e�6c��r8�En��"?4�6Dx�6H���
+C�*0��_�43mI���j��,��E�[W��)1�A/����Aw1`���
�x�/��s���&^��|z=�w���?F��l���'��R���}`��N9j�29�Y�W��g#q��vVzJ������_q
{}������h<@���i�s��0�(�,+��dKxU����|�jf0�4�������/"�b_z�ZI
xX��`uM�{>������Z�X?�1�J8&tC�@P[��`'h����O��u�j%�������=�
��/�=a}h+i�,F+��J
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Currently enabled options:
+ %s
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on  new Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd bytes.
+ old Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd, main archive=%jd.
+%d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not a regular file%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s subprocess failed with wait status code %d%s subprocess returned error exit status %d%s subprocess was interrupted%s subprocess was killed by signal (%s)%s%s suggests %s%s was locked by another process
+%s%s was locked by another process with pid %d
+%s%s%s%s: %s%s:%s
+ %s
+%s%s/%s has been changed (manually or by a script); switching to manual updates only%s%s/%s is dangling; it will be updated with best choice%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: cannot rename obsolete conffile '%s' to '%s': %s%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: %s%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%.255s' is not a Debian format archive'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field present for package with inappropriate '%s' field'%s' field value '%.250s''%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version '%s''%s' field, reference to '%.255s': version contains '%c' instead of '%c''%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' is not a valid architecture name in '%s' field: %s'%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <link> <name> <path>--%s needs <link> <name> <path> <priority>--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s only allowed with --%s--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one <archname> argument--%s takes one <pkgname> argument--%s takes one <trigname> argument--%s takes one <version> argument--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAssertable features: support-predepends, working-epoch, long-filenames,
+  multi-conrep, multi-arch, versioned-provides, protected-field.
+
+Authenticating %s ...
+Authentication is required to run update-alternativesCommands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -b|--build <directory> [<deb>]   Build an archive.
+  -c|--contents <deb>              List contents.
+  -I|--info <deb> [<cfile>...]     Show info to stdout.
+  -W|--show <deb>                  Show information on package(s)
+  -f|--field <deb> [<cfield>...]   Show field(s) to stdout.
+  -e|--control <deb> [<directory>] Extract control info.
+  -x|--extract <deb> <directory>   Extract files.
+  -X|--vextract <deb> <directory>  Extract & list files.
+  -R|--raw-extract <deb> <directory>
+                                   Extract control info and files.
+  --ctrl-tarfile <deb>             Output control tarfile.
+  --fsys-tarfile <deb>             Output filesystem tarfile.
+
+Commands:
+  -i|--install       <.deb file name>... | -R|--recursive <directory>...
+  --unpack           <.deb file name>... | -R|--recursive <directory>...
+  -A|--record-avail  <.deb file name>... | -R|--recursive <directory>...
+  --configure        <package>... | -a|--pending
+  --triggers-only    <package>... | -a|--pending
+  -r|--remove        <package>... | -a|--pending
+  -P|--purge         <package>... | -a|--pending
+  -V|--verify [<package>...]       Verify the integrity of package(s).
+  --get-selections [<pattern>...]  Get list of selections to stdout.
+  --set-selections                 Set package selections from stdin.
+  --clear-selections               Deselect every non-essential package.
+  --update-avail [<Packages-file>] Replace available packages info.
+  --merge-avail [<Packages-file>]  Merge with info from file.
+  --clear-avail                    Erase existing available info.
+  --forget-old-unavail             Forget uninstalled unavailable pkgs.
+  -s|--status [<package>...]       Display package status details.
+  -p|--print-avail [<package>...]  Display available version details.
+  -L|--listfiles <package>...      List files 'owned' by package(s).
+  -l|--list [<pattern>...]         List packages concisely.
+  -S|--search <pattern>...         Find package(s) owning file(s).
+  -C|--audit [<package>...]        Check for broken package(s).
+  --yet-to-unpack                  Print packages selected for installation.
+  --predep-package                 Print pre-dependencies to unpack.
+  --add-architecture <arch>        Add <arch> to the list of architectures.
+  --remove-architecture <arch>     Remove <arch> from the list of architectures.
+  --print-architecture             Print dpkg architecture.
+  --print-foreign-architectures    Print allowed foreign architectures.
+  --assert-<feature>               Assert support for the specified feature.
+  --validate-<thing> <string>      Validate a <thing>'s <string>.
+  --compare-versions <a> <op> <b>  Compare version numbers - see below.
+  --force-help                     Show help on forcing.
+  -Dh|--debug=help                 Show help on debugging.
+
+Commands:
+  -s, --status [<package>...]      Display package status details.
+  -p, --print-avail [<package>...] Display available version details.
+  -L, --listfiles <package>...     List files 'owned' by package(s).
+  -l, --list [<pattern>...]        List packages concisely.
+  -W, --show [<pattern>...]        Show information on package(s).
+  -S, --search <pattern>...        Find package(s) owning file(s).
+      --control-list <package>     Print the package control file list.
+      --control-show <package> <file>
+                                   Show the package control file.
+  -c, --control-path <package> [<file>]
+                                   Print path for package control file.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not chroot into maintainer script environmentDo not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnore a missing stat override when removing itIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstall or remove incidental packages even when on holdInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: removing the lock file is always wrong, and can end up damaging the
+locked area and the entire system. See <https://wiki.debian.org/Teams/Dpkg/FAQ>.Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Obsolete conffile '%s' has been modified by you.
+Offer to replace config files with no new versionsOptions:
+  --admindir <directory>   set the directory with the statoverride file.
+  --instdir <directory>    set the root directory, but not the admin dir.
+  --root <directory>       set the directory of the root filesystem.
+  --update                 immediately update <path> permissions.
+  --force                  deprecated alias for --force-all.
+  --force-<thing>[,...]    override problems (see --force-help).
+  --no-force-<thing>[,...] stop when problems encountered.
+  --refuse-<thing>[,...]   ditto.
+  --quiet                  quiet operation, minimal output.
+  --help                   show this help message.
+  --version                show the version.
+
+Options:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --load-avail                     Use available file on --show and --list.
+  --no-pager                       Disables the use of any pager.
+  -f|--showformat=<format>         Use alternative format for --show.
+
+Options:
+  --admindir=<directory>     Use <directory> instead of %s.
+  --root=<directory>         Install on a different root directory.
+  --instdir=<directory>      Change installation dir without changing admin dir.
+  --pre-invoke=<command>     Set a pre-invoke hook.
+  --post-invoke=<command>    Set a post-invoke hook.
+  --path-exclude=<pattern>   Do not install paths which match a shell pattern.
+  --path-include=<pattern>   Re-include a pattern after a previous exclusion.
+  -O|--selected-only         Skip packages not selected for install/upgrade.
+  -E|--skip-same-version     Skip packages whose same version is installed.
+  -G|--refuse-downgrade      Skip packages with earlier version than installed.
+  -B|--auto-deconfigure      Install even if it would break some other package.
+  --[no-]triggers            Skip or force consequential trigger processing.
+  --verify-format=<format>   Verify output format (supported: 'rpm').
+  --no-pager                 Disables the use of any pager.
+  --no-debsig                Do not try to verify package signatures.
+  --no-act|--dry-run|--simulate
+                             Just say what we would do - don't do it.
+  -D|--debug=<octal>         Enable debugging (see -Dhelp or --debug=help).
+  --status-fd <n>            Send status change updates to file descriptor <n>.
+  --status-logger=<command>  Send status change updates to <command>'s stdin.
+  --log=<filename>           Log status changes and actions to <filename>.
+  --ignore-depends=<package>[,...]
+                             Ignore dependencies involving <package>.
+  --force-<thing>[,...]      Override problems (see --force-help).
+  --no-force-<thing>[,...]   Stop when problems encountered.
+  --refuse-<thing>[,...]     Ditto.
+  --abort-after <n>          Abort after encountering <n> errors.
+  --robot                    Use machine-readable output on some commands.
+
+Options:
+  --altdir <directory>     change the alternatives directory.
+  --admindir <directory>   change the administrative directory.
+  --instdir <directory>    change the installation directory.
+  --root <directory>       change the filesystem root directory.
+  --log <file>             change the log file.
+  --force                  allow replacing files with alternative links.
+  --skip-auto              skip prompt for alternatives correctly configured
+                           in automatic mode (relevant for --config only)
+  --quiet                  quiet operation, minimal output.
+  --verbose                verbose operation, more output.
+  --debug                  debug output, way more output.
+  --help                   show this help message.
+  --version                show the version.
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Options:
+  --package <package>      name of the package whose copy of <file> will not
+                             be diverted.
+  --local                  all packages' versions are diverted.
+  --divert <divert-to>     the name used by other packages' versions.
+  --rename                 actually move the file aside (or back).
+  --no-rename              do not move the file aside (or back) (default).
+  --admindir <directory>   set the directory with the diversions file.
+  --instdir <directory>    set the root directory, but not the admin dir.
+  --root <directory>       set the directory of the root filesystem.
+  --test                   don't do anything, just demonstrate.
+  --quiet                  quiet operation, minimal output.
+  --help                   show this help message.
+  --version                show the version.
+
+Options:
+  -v, --verbose                    Enable verbose output.
+  -D, --debug                      Enable debugging output.
+      --showformat=<format>        Use alternative format for --show.
+      --deb-format=<format>        Select archive format.
+                                     Allowed values: 0.939000, 2.0 (default).
+      --nocheck                    Suppress control file check (build bad
+                                     packages).
+      --root-owner-group           Forces the owner and groups to root.
+      --[no-]uniform-compression   Use the compression params on all members.
+  -z#                              Set the compression level when building.
+  -Z<type>                         Set the compression type used when building.
+                                     Allowed types: gzip, xz, none.
+  -S<strategy>                     Set the compression strategy when building.
+                                     Allowed values: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite an existing stat override when adding itOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Protected fieldPurging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove a protected packageRemove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Removing obsolete conffile %s ...
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Run update-alternatives to modify system alternative selectionsSaving as %s ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Usage: %s [<option>...] <command>
+
+Usage: %s [<option>...] <trigger-name>
+       %s [<option>...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use MAC based security if availableUse dpkg --contents (= dpkg-deb --contents) to list archive files contents.
+Use dpkg --info (= dpkg-deb --info) to examine archive files.
+Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenUseful environment variables:
+Validatable things: pkgname, archname, trigname, version.
+
+VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path %s%s doesn't existalternative path is not absolute as it should be: %salternatives ('|') not allowed in '%s' fieldambiguous package name '%s' with more than one installed instancean error occurred with no error handling in placean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largear member time %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchitecture name '%s' is invalid: %sarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' is not a regular filearchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive details '%s' field not allowed in status filearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'boolean (yes/no) '%s' field: %sbroken due to failed removal or installationbroken due to postinst failurebuilding an unknown package in '%s'.building package '%s' in '%s'.can't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot access archive '%s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot create administrative directory '%s'cannot create alternatives directory '%s'cannot create base directory for %scannot create directory %scannot create log directory '%s'cannot create the dpkg database directory %scannot create the dpkg updates directory %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get package %s filesystem last modification timecannot get security labeling handlecannot grow varbuf to size %zu; it would overflowcannot open %scannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open directory '%s'cannot open file %scannot open security status notification channelcannot read %scannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set primary group ID to rootcannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat %scannot stat '%.255s' (in '%.255s')cannot stat file '%s%s'cannot stat file '%s'cannot stat pathname '%s'cannot write file %s into the pagercannot write to log file '%s': %scannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile '%s' is present but is requested to be removedconffile '%s' marked for removal on upgrade, shipped in packageconffile difference visualizerconffile file contains an empty lineconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is not an absolute pathnameconffile name '%s' is too long, or missing final newlineconffile name missing after flag '%s'conffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering deconfiguration of protected
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file '%s' for package '%s' is missing valuecontrol file '%s' for package '%s' is missing value separatorcontrol file contains %ccontrol membercorrupt info database format file '%s'corrupted filesystem tarfile in package archivecould not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdecompressing archive '%s' (size=%jd) member '%s'dependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdeprecated --%s option; use --%s insteaddiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+diverting file '%s' from an Essential package with rename is dangerous, use --no-renamedone
+downgrading %.250s from %.250s to %.250sdpkg database lockdpkg frontend lockdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty and whitespace-only lines are not allowed in conffilesempty archive details '%s' fieldempty field nameempty string from fgets reading conffilesempty trigger names are not permittedempty value for '%s' fieldend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is emptyepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while cleaning uperror while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not a Debian binary archive (try dpkg-split?)file '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedfirst (want) word in '%s' field: %sforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentformat version with too big major componentformat version with too big minor componentfound unknown packages; this might mean the available database
+is outdated, and needs to be updated through a frontend method;
+please see the FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>generated corrupt ar header for '%s'group '%s' does not existhas invalid value '%.50s'has trailing junkheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalled %s package %s scriptinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal errorinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid package name in '%s' field: %sinvalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid tar header checksuminvalid tar header checksum fieldinvalid tar header gid fieldinvalid tar header mtime fieldinvalid tar header size fieldinvalid tar header uid fieldinvalid tar header with empty name fieldinvalid trigger name '%.250s': %.250sis missing a valueline not terminated while trying to read %sline too long or not terminated while trying to read %sline with conffile filename '%s' has leading white spaceslink %s is both primary and slaveloading control file '%s' for package '%s'loading files list file for package '%s'local diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing '%s' fieldmissing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s or --%sneed an action optionnew %s package %s scriptnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no 'control' file in control archive!no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, %s is protected, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot enough privileges to change root directory with --force-not-root, consider using --force-script-chrootless?not installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '%s' field usedobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete compression type '%s'; use xz insteadobsolete compression type '%s'; use xz or gzip insteadobsolete force/refuse option '%s'obsolete option '--%s'old %s package %s scriptold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoutside error context, abortingoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s (%s) with field '%s: %s' is not co-installable with %s which has multiple installed instancespackage %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package architecture is missing or emptypackage contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has '%s' field but is architecture '%s'package has '%s' field but is missing architecturepackage has status %s and has conffiles, forgetting thempackage has status %s but no triggers awaitedpackage has status %s but no triggers pendingpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name '%s' is invalid: %spackage name has characters that aren't lowercase alphanums or '-+.'package not in status nor available database at line %d: %.250spackage signature verificationpackage version numberpager to show fileparsing file '%.255s' near line %d:
+ parsing file '%s' near line %d package '%s':
+ part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)partially read tar headerpassed
+pastepath may not contain newlinesplease specify --no-rename explicitly, the default will change to --rename in 1.20.xpre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %squadstate (foreign/allowed/same/no) '%s' field: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'renaming %s link from %s%s to %s%srenaming %s slave link from %s%s to %s%srequested operation requires superuser privilegerequired read/write access to the dpkg database directory %srequired write access to dpkg database directory '%s' for bulk available updaterevision number is emptyrm command for cleanuproot or empty directory listed as a conffile in '%s' fieldsearched, but found no packages (files matching *.deb)second (error) word in '%s' field: %ssection<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesshowing package list on pagerskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filesyntax error in triggers deferred file '%.250s' at line %d character %zd '%s'takes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthird (status) word in '%s' field: %sthis is a protected package; it should not be removedthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too few values in archive details '%s' field (compared to others)too many errors, stoppingtoo many nested errors during error recoverytoo many values in archive details '%s' field (compared to others)too-long line or missing newline in '%.250s'treewalk root %s is not a directorytrigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name '%s' is invalid: %strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers database locktriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to access dpkg database directory '%s' for bulk available updateunable to access the dpkg database directory %sunable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to check lock file for dpkg database directory %sunable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create dpkg database lock file for directory %sunable to open/create dpkg frontend lock for directory %sunable to open/create new triggers deferred file '%.250s'unable to open/create triggers lock file '%.250s'unable to parse timestamp '%.255s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read link '%s%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat '%.255s' (which was about to be installed)unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunexpected pre-existing pathname %sunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown flag '%s' for conffile '%s'unknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown system group '%s' in statoverride file; the system group got removed
+before the override, which is most probably a packaging bug, to recover you
+can remove the override manually with %sunknown system user '%s' in statoverride file; the system user got removed
+before the override, which is most probably a packaging bug, to recover you
+can remove the override manually with %sunknown tar header type '%c'unknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunrecoverable fatal error, abortingunsupported GNU tar header type '%c'unsupported PAX tar header type '%c'unsupported Solaris tar header type '%c'unsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has line starting with non-space '%c'value for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion '%s' has bad syntax: %sversion number does not start with digitversion number is emptyversion string has embedded spacesversion string is emptyversioned Provideswait for %s subprocess failedwait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingword in '%s' field: %syes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou do not have permission to lock the dpkg database directory %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.20.6
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2021-01-08 18:15+0100
+Last-Translator: Sven Joachim <svenjoac@gmx.de>
+Language-Team: German <debian-l10n-german@lists.debian.org>
+Language: de
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1)
+
+ anhängige Trigger von Paketen, die nicht auflösbar sind oder sein könnten:
+
+Konfigurationsdatei »%s« existiert auf dem System nicht.
+Neue Konfigurationsdatei wird wie gefordert installiert.
+
+Gegenwärtig aktivierte Optionen:
+ %s
+
+Debug-Optionen können durch bitweises Oder gemischt werden.
+Beachten Sie, dass sich die Werte und Bedeutungen ändern können.
+
+Verwenden Sie »dpkg«, um Pakete auf Ihrem System zu (de)installieren, oder
+»apt« oder »aptitude« für benutzerfreundliches Paketmanagement. Pakete, die
+mit »dpkg-deb --extract« entpackt wurden, werden nicht korrekt installiert!
+
+WARNUNG - Anwenden der mit [!] markierten Optionen kann Ihre Installation
+schwer beschädigen. Mit [*] markierte Optionen sind per Vorgabe aktiviert.
+     Nicht geändert seit der Installation.
+     Die Version im Paket ist dieselbe wie bei der letzten Installation.
+     keine gewöhnliche Datei   %.255s
+   Wie möchten Sie vorgehen? Ihre Wahlmöglichkeiten sind:
+    Y oder I : Die Version des Paket-Betreuers installieren
+    N oder O : Die momentan installierte Version beibehalten
+       D     : Die Unterschiede zwischen den Versionen anzeigen
+       Z     : Eine Shell starten, um die Situation zu begutachten
+  %.250s (Version %.250s) ist vorhanden und %s.
+  %.250s (Version %.250s) soll installiert werden.
+  %.250s ist %s.
+  %.250s ist installiert, ist aber Version %.250s.
+  %.250s ist nicht installiert.
+  %.250s soll dekonfiguriert werden.
+  %.250s soll installiert werden, ist aber Version %.250s.
+  %.250s soll entfernt werden.
+  %.250s ist entpackt, wurde aber nie konfiguriert.
+  %.250s ist entpackt, ist aber Version %.250s.
+  %.250s letzte konfigurierte Version ist %.250s.
+  %.250s liefert %.250s und ist vorhanden und %s.
+  %.250s liefert %.250s und wird installiert.
+  %.250s liefert %.250s, ist aber %s.
+  %.250s liefert %.250s, soll aber dekonfiguriert werden.
+  %.250s liefert %.250s, soll aber entfernt werden.
+  %s (%s) stellt %s bereit.
+  -?, --help                       Diesen Hilfetext anzeigen.
+      --version                    Version anzeigen.
+
+  Paket %s wartet auf Triggerverarbeitung.
+  Paket %s ist noch nicht konfiguriert.
+  Paket %s ist nicht installiert.
+  Paket %s soll entfernt werden.
+  Paket %s, das %s bereitstellt, wartet auf Triggerverarbeitung.
+  Paket %s, das %s bereitstellt, ist noch nicht konfiguriert.
+  Paket %s, das %s bereitstellt, ist nicht installiert.
+  Paket %s, das %s bereitstellt, soll entfernt werden.
+  Version von %s auf dem System ist %s.
+  Version von %s auf dem System, bereitgestellt von %s, ist %s.
+  Zu konfigurierende Version von %s auf dem System ist %s.
+  Link %s ist %s  beste Version des Links ist %s  beste Version des Links nicnt verfügbar  Link zur Zeit nicht vorhanden  Link verweist zur Zeit auf %s  Slave %s ist %s  Slave %s: %s %7jd Byte, %5d Zeilen   %c  %-20.127s %.127s
+ %d in %s:  %d Paket, aus folgendem Abschnitt: %d Pakete, aus folgenden Abschnitten: %s (%jd Byte)
+ %s (%s) beschädigt %s und ist %s.
+ %s (keine gewöhnliche Datei)
+ ==> Gelöscht (von Ihnen oder von einem Skript) seit der Installation.
+ ==> Datei auf System wurde von Ihnen oder von einem Skript angelegt.
+ ==> Datei auch in Paket vom Paket-Betreuer bereitgestellt.
+ ==> Alte Konfigurationsdatei wird als Vorgabe beibehalten.
+ ==> Geändert (von Ihnen oder von einem Skript) seit der Installation.
+ ==> Paketverteiler hat eine aktualisierte Version herausgegeben.
+ ==> Wie gefordert wird die momentane alte Datei verwendet.
+ ==> Neue Konfigurationsdatei wird als Vorgabe verwendet.
+ ==> Wie gefordert wird die neue Datei verwendet.
+Paket %s: Teil(e)  Der Standardweg ist die Installation der neuen Version.
+ Der Standardweg ist das Beibehalten der momentanen Version.
+ und  hängt ab von  neues Debian-Paket, Version %d.%d.
+ Größe %jd Byte: control-Archiv= %jd Byte.
+ altes Debian-Paket, Version %d.%d.
+ Größe %jd Byte: control-Archiv= %jd, Hauptarchiv= %jd.
+%d erwartetes Programm nicht im PATH gefunden oder nicht ausführbar
+%s%d erwartete Programme nicht im PATH gefunden oder nicht ausführbar
+%s%d Datei oder Verzeichnis ist derzeit installiert.)
+%d Dateien und Verzeichnisse sind derzeit installiert.)
+%d benötigte control-Komponente fehlt%d benötigte control-Komponente fehlen%s (Unterprozess): %s
+%s - Priorität %d%s beschädigt %s%s kollidiert mit %s%s defekt: %s%s Debug-Option, --debug=<oktal> oder -D<oktal>:
+
+ Nummer  Ref. in Quelle   Beschreibung
+%s hängt von %s ab%s erweitert %s%s-Optionen zum Erzwingen - Verhalten steuern, wenn Probleme gefunden werden:
+  Warnen aber fortsetzen: --force-<Ding>,<Ding>,...
+  Mit Fehler anhalten:    --refuse-<Ding>,<Ding>,... | --no-force-<Ding>,...
+ Dinge erzwingen:
+%s ist keine reguläre Datei%s ist nicht richtig installiert - alle Abhängigkeiten darauf werden ignoriert%s hängt (vorher) von %s ab%s empfiehlt %s»%s«-Unterprozess mit Warte-Statuswert %d fehlgeschlagen»%s«-Unterprozess gab den Fehlerwert %d zurück»%s«-Unterprozess wurde unterbrochen»%s«-Unterprozess wurde durch Signal (%s)%s getötet%s schlägt %s vor%s war von einem anderen Prozess gesperrt
+%s%s war von einem anderen Prozess mit PID %d gesperrt
+%s%s%s%s: %s%s:%s
+%s
+%s%s/%s wurde geändert (manuell oder von einem Skript);
+es wird zu ausschließlich manuellen Aktualisierungen umgeschaltet%s%s/%s ist ein ins Leere zeigender Link; wird mit der besten Auswahl aktualisiert%s:
+    Teil-Formatversion:            %d.%d
+    Teil des Paketes:               %s
+        ... Version:                %s
+        ... Architektur:            %s
+        ... MD5-Prüfsumme:          %s
+        ... Länge:                  %jd Byte
+        ... geteilt alle:           %jd Byte
+    Teil-Nummer:                    %d/%d
+    Teil-Länge:                     %jd Byte
+    Teil-Offset:                    %jd Byte
+    Teil-Dateigröße (ben. Anteil):  %jd Byte
+
+%s: Veraltetes Conffile »%s« kann nicht in »%s« umbenannt werden: %s%s: Conffile »%.250s« ist keine gewöhnliche Datei oder symbolischer Link (= »%s«)%s: Conffile »%.250s« ergibt einen degenerierten Dateinamen
+ (»%s« ist ein symbolischer Link auf »%s«)%s: Konfigurationsdatei »%s« ist eine zirkulärer Link
+ (= »%s«)%s: Abhängigkeitsprobleme, wird aber trotzdem wie gefordert konfiguriert:
+%s%s: Abhängigkeitsprobleme, Trigger werden aber wie gefordert dennoch verarbeitet:
+%s%s: Abhängigkeitsprobleme, wird aber wie gefordert dennoch entfernt:
+%s%s: Fehler beim Binden der Eingabe an bzip2-Datenstrom%s: Fehler beim Binden der Eingabe an gzip-Datenstrom%s: Fehler beim Binden der Ausgabe an gzip-Datenstrom%s: Fehler beim Binden der Ausgabe an gzip-Datenstrom%s: Verknüpfen von »%.250s« mit »%.250s« fehlgeschlagen: %s%s: Löschen von »%.250s« fehlgeschlagen (vor Überschreiben): %s%s: Entfernen von »%.250s« fehlgeschlagen: %s%s: Löschen von alter Sicherung »%.250s« fehlgeschlagen: %s%s: Löschen von alter verteilter Version »%.250s« fehlgeschlagen: %s%s: Umbenennen von »%.250s« in »%.250s« fehlgeschlagen: %s%s: interner bzip2-Lesefehler%s: interner bzip2-Lesefehler: »%s«%s: interner bzip2-Schreibfehler%s: interner bzip2-Schreibfehler: »%s«%s: interner gzip-Lesefehler%s: interner gzip-Lesefehler: %s%s: interner gzip-Lesefehler: »%s«%s: interner gzip-Schreibfehler%s: interner gzip-Schreibfehler: %s%s: interner gzip-Schreibfehler: »%s«%s: lzma-Fehler beim Schließen%s: lzma-Fehler: %s%s: lzma-Lesefehler%s: lzma-Schreibfehler%s: Kopierfehler beim Durchreichen: %s%s: %s kann nicht geöffnet werden, um die Prüfsumme zu berechnen: %s%s: Ziel der Conffile »%s« kann nicht mit readlink ermittelt werden
+ (= »%s«): %s%s: Konfigurationsdatei »%s« kann nicht mit stat abgefragt werden
+ (= »%s«): %s»%.255s« enthält keine control-Komponente »%.255s«»%.255s« ist kein Archiv im Debian-Format»%s« kollidiert mit »%s«»%s« enthält benutzerdefinierten Prioritätswert »%s«»%s« akzeptiert keine WerteFeld »%s« vorhanden für Paket mit unpassendem Feld »%s«Feld »%s« Wert »%.250s«Feld »%s«, ungültiger Paketname »%.255s«: %sFeld »%s«, fehlender Architekturname oder Müll, wo Architekturname erwartet wurdeFeld »%s«, fehlender Paketname oder Müll, wo Paketname erwartet wurdeFeld »%s«, Referenz auf »%.255s«:
+ »%c« ist veraltet, benutzen Sie stattdessen »%c=« oder »%c%c«Feld »%s«, Referenz auf »%.255s«:
+ fehlerhafte Versionsabhängigkeit %c%cFeld »%s«, Referenz auf »%.255s«:
+ implizite exakte Übereinstimmung mit Versionsnummer, vielleicht stattdessen »=« benutzenFeld »%s«, Referenz auf »%.255s«:
+ Wert für Version beginnt mit nicht-alphanumerischem Zeichen, vielleicht ein Leerzeichen hinzufügenFeld »%s«, Referenz auf »%.255s«: ungültiger Architekturname »%.255s«: %sFeld »%s«, Referenz auf »%.255s«: Version »%s«Feld »%s«, Referenz auf »%.255s«: Version enthält »%c« statt »%c«Feld »%s«, Referenz auf »%.255s«: Version nicht abgeschlossenFeld »%s«, Syntaxfehler nach Referenz zu Paket »%.255s«»%s« ist kein gültiger Architekturname in Feld »%s«: %s»%s« benötigt einen Wert»%s« wurde im PATH nicht gefunden oder ist nicht ausführbar(Verschwinden von %s wurde bemerkt, welches komplett ersetzt wurde.)
+(Lese Datenbank ... (keine Beschreibung vorhanden)(insgesamt %jd Byte)
+, Speicherabbild erzeugtOption -%c akzeptiert keine WerteOption -%c benötigt einen Wert--%s --pending akzeptiert keine Nicht-Options-Argumente--%s --recursive benötigt mindestens einen Pfad als Argument--%s unterstützt (noch) nicht das Lesen der .deb-Datei von der Standardeingabe --%s benötigt einen .deb-Dateinamen und ein Verzeichnis als Argumente--%s benötigt <Link> <Name> <Pfad>--%s benötigt <Link> <Name> <Pfad> <Priorität>--%s benötigt <Name>--%s benötigt <Name> <Pfad>--%s benötigt einen .deb-Dateinamen als Argument--%s benötigt ein Verzeichnis als Argument--%s benötigt eine Datei als Argument--%s benötigt ein einzelnes Argument--%s benötigt ein Zielverzeichnis.
+Vielleicht sollten Sie dpkg --install verwenden?--%s benötigt einen gültigen Paketnamen. »%.250s« ist kein solcher; %s--%s benötigt mindestens eine Paket-Archivdatei als Argument--%s benötigt mindestens ein Paketnamen-Argument--%s benötigt vier Argumente--%s ist nur mit --%s erlaubtOption --%s akzeptiert keine WerteOption --%s benötigt einen Wert--%s benötigt ein positives oktales Argument--%s benötigt eine oder mehrere Teildateien als Argumente--%s benötigt höchstens eine Packages-Datei als Argument--%s akzeptiert maximal zwei Argumente--%s akzeptiert maximal zwei Argumente (.deb und Verzeichnis)--%s akzeptiert genau ein Argument--%s akzeptiert genau zwei Argumente--%s akzeptiert keine Argumente--%s benötigt ein <archname>-Argument--%s benötigt ein <pkgname>-Argument--%s benötigt ein <trigname>-Argument--%s benötigt ein <version>-Argument--%s benötigt ein Paketnamen-Argument--%s akzeptiert nur ein Argument (.deb-Dateiname)--%s mit veraltetem Beziehungs-Operator »%s« verwendet--auto benötigt genau einen Teil-Dateinamen--auto benötigt die Angabe der --output-Option--compare-versions fehlerhafte Beziehung--compare-versions akzeptiert drei Argumente: <Version> <Beziehung> <Version>--search benötigt mindestens ein Dateinamenmuster-Argument--split benötigt einen Quelldatei-Namen als Argument--split akzeptiert höchstens einen Quelldatei-Namen und ein Ziel-Präfix--update angegeben, aber %s existiert nicht--update ist sinnlos für --remove... sieht so aus, als hätte das geklappt..../%s; aber:
+<Kompression> von tar -cf<Deb> ist der Dateiname eines Archivs im Debian-Format.
+<CDatei> ist der Name einer administrativen Dateikomponente.
+<CFeld> ist der Name eines Feldes aus der Haupt-»control«-Datei.
+
+<Dekompression><dpkg-deb --info Pipe><Link> und <Pfad> können nicht identisch sein<Link> ist der symbolische Link, der auf %s/<Name> verweist.
+  (z.B. /usr/bin/pager)
+<Name> ist der Name des Masters für diese Link-Gruppe.
+  (z.B. pager)
+<Pfad> ist der Ort einer der alternativen Ziel-Dateien.
+  (z.B. /usr/bin/less)
+<Priorität> ist eine Ganzzahl; Optionen mit höheren Zahlen haben im
+  automatischen Modus höhere Priorität.
+<Dateideskriptor für Paketstatus und Fortschritt><Standardfehlerausgabe><Standardeingabe><Standardausgabe>»%s« wird hinzugefügt
+Installation kollidierender Pakete erlaubenAlternative %s nicht verändert, weil Auswahl %s nicht verfügbar ist.Fehlende Konf.-Dateien immer installierenImmer neue Konf.-Dateien verwenden, nicht nachfragenImmer alte Konf.-Dateien verwenden, nicht nachfragenEin anderer Prozess hat die Datenbank zum Schreiben gesperrt und könnte sie
+gerade verändern, einige der folgenden Probleme sind möglicherweise dadurch
+verursacht.
+ArchitekturZusicherbare Merkmale: support-predepends, working-epoch, long-filenames,
+multi-conrep, multi-arch, versioned-provides, protected-field.
+
+%s wird authentifiziert ...
+Authentifizierung ist erforderlich, um update-alternatives auszuführenBefehle:
+  --add <Eigentümer> <Gruppe> <Modus> <Pfad>
+                           neuen Eintrag zur Datenbank hinzufügen.
+  --remove <Pfad >         Pfad aus der Datenbank entfernen.
+  --list [<Glob-Muster>]   aktuelle Overrides in der Datenbank auflisten.
+
+Befehle:
+  --check-supported                Überprüfen, ob das laufende dpkg
+                                     Trigger unterstützt.
+
+Befehle:
+  --install <Link> <Name> <Pfad> <Priorität>
+    [--slave <Link> <Name> <Pfad>] ...
+                           Gruppe von Alternativen zum System hinzufügen.
+  --remove <Name> <Pfad>   <Pfad> aus der Alternativ-Gruppe <Name> entfernen.
+  --remove-all <Name>      Gruppe <Name> aus dem Alternativ-System entfernen.
+  --auto <Name>            Master-Link <Name> in automatischen Modus bringen.
+  --display <Name>         Informationen über Gruppe <Name> anzeigen.
+  --query <Name>           Maschinenlesbare Version von --display <Name>.
+  --list <Name>            Alle Ziele der Gruppe <Name> anzeigen.
+  --get-selections         Namen und Status von Master-Alternativen auflisten.
+  --set-selections         Alternativen-Status aus Standardeingabe lesen.
+  --config <Name>          Alternativen für die Gruppe <Name> anzeigen und den
+                           Benutzer auffordern, die gewünschte auszuwählen.
+  --set <Name> <Pfad>      <Pfad> als Alternative für <Name> setzen.
+  --all                    --config auf allen Alternativen ausführen.
+
+Befehle:
+  -b|--build <Verzeichnis> [<Deb>] Archiv bauen.
+  -c|--contents <Deb>              Inhalt auflisten.
+  -I|--info <Deb> [<CDatei>...]    Info auf Standardausgabe anzeigen.
+  -W|--show <Deb>                  Informationen über Paket(e) anzeigen.
+  -f|--field <Deb> [<CFeld>...]    Feld(er) auf Standardausgabe anzeigen.
+  -e|--control <Deb> [<Verz.>]     Control-Info extrahieren.
+  -x|--extract <Deb> <Verz.>       Dateien extrahieren.
+  -X|--vextract <Deb> <Verz.>      Dateien extrahieren und auflisten.
+  -R|--raw-extract <Deb> <Verz.>   Control-Info und Dateien extrahieren.
+  --ctrl-tarfile <Deb>             Control-Tardatei ausgeben.
+  --fsys-tarfile <Deb>             Dateisystem-Tardatei ausgeben.
+
+Befehle:
+  -i|--install       <.deb-Dateiname>... | -R|--recursive <Verzeichnis> ...
+  --unpack           <.deb-Dateiname>... | -R|--recursive <Verzeichnis> ...
+  -A|--record-avail  <.deb-Dateiname>... | -R|--recursive <Verzeichnis> ...
+  --configure        <Paket>... | -a|--pending
+  --triggers-only    <Paket>... | -a|--pending
+  -r|--remove        <Paket>... | -a|--pending
+  -P|--purge         <Paket>... | -a|--pending
+  -V|--verify [<Paket>...]         Integrität von Paket(en) überprüfen.
+  --get-selections [<Muster>...]   Paketauswahl auf Standardausgabe ausgeben.
+  --set-selections                 Paketauswahl aus Standardeingabe setzen.
+  --clear-selections               Jedes nicht-essenzielle Paket abwählen.
+  --update-avail [<Packages-Dat.>] Liste der verfügbaren Pakete ersetzen.
+  --merge-avail [<Packages-Datei>] Listen mit Info aus Datei zusammenführen.
+  --clear-avail                    Verfügbarkeits-Informationen löschen.
+  --forget-old-unavail             Nicht verfügbare uninst. Pakete vergessen.
+  -s|--status [<Paket>...]         Details zum Paketstatus anzeigen.
+  -p|--print-avail [<Paket>...]    Details zur verfügbaren Version anzeigen.
+  -L|--listfiles <Paket>...        Dateien auflisten, die dem Paket »gehören«.
+  -l|--list [<Muster>...]          Pakete kurz auflisten.
+  -S|--search <Muster>...          Paket(e) suchen, denen Datei(en) »gehören«.
+  -C|--audit [<Paket>...]         Auf beschädigte(s) Paket(e) prüfen.
+  --yet-to-unpack                  Zur Installation ausgewählte Pakete ausgeben.
+  --predep-package                 Zu entpackende Vor-Abhängigkeiten ausgeben.
+  --add-architecture <Arch>        <Arch> zur Liste der Architekturen
+                                     hinzufügen.
+  --remove-architecture <Arch>     <Arch> aus der Liste der Architekturen
+                                     entfernen.
+  --print-architecture             Architektur von dpkg ausgeben.
+  --print-foreign-architectures    Erlaubte fremde Architekturen ausgeben.
+  --assert-<Merkmal>               Unterstützung für das angegebene Merkmal
+                                   zusichern.
+  --validate-<Sache> <Zeichenk.>   <Zeichenkette> einer <Sache> validieren.
+  --compare-versions <a> <op> <b>  Versionsnummern vergleichen - siehe unten.
+  --force-help                     Hilfe zum Erzwingen anzeigen.
+  -Dh|--debug=help                 Hilfe zum Debuggen anzeigen.
+
+Befehle:
+  -s, --status [<Paket>...]        Details zum Paketstatus anzeigen.
+  -p, --print-avail [<Paket>...]   Details zur vorhandenen Version anzeigen.
+  -L, --listfiles <Paket>...       zu Paket(en) gehörende Dateien auflisten.
+  -l, --list [<Muster>...]         Übersicht zu Paketen auflisten.
+  -W, --show [<Muster>...]         Informationen zu Paket(en) anzeigen.
+  -S, --search <Muster>...         Pakete suchen, denen Datei(en) gehören.
+     --control-list <Paket>        Control-Dateiliste des Paketes ausgeben.
+     --control-show <Paket> <Datei>
+                                   Control-Datei des Paketes anzeigen.
+  -c, --control-path <Paket> [<Datei>]
+                                   Pfad zur control-Datei des Paketes ausgeben.
+
+Befehle:
+  -s|--split <Datei> [<Präfix>]    Ein Archiv aufteilen.
+  -j|--join <Teil> <Teil> ...      Teile zusammenfügen.
+  -I|--info <Teil> ...             Info über Teil anzeigen.
+  -a|--auto -o <Ganzes> <Teil>     Teile automatisch ansammeln.
+  -l|--listq                       Nicht passende Teile auflisten.
+  -d|--discard [<Dateiname> ...]   Nicht passende Teile verwerfen.
+
+Befehle:
+  [--add] <Datei>          eine Umleitung hinzufügen.
+  --remove <Datei>         Umleitung entfernen.
+  --list [<Glob-Muster>]   Datei-Umleitungen anzeigen.
+  --listpackage <Datei>    Paket anzeigen, welches die Datei umleitet.
+  --truename <Datei>       die umgeleitete Datei zurückgeben.
+
+Vergleichsoperatoren für --compare-versions sind:
+  lt le eq ne ge gt       (leere Version gilt als früher als jede Version);
+  lt-nl le-nl ge-nl gt-nl (leere Version gilt als später als jede Version);
+  < << <= = >= >> >       (nur für Kompatibilität mit Syntax in control-Datei).
+
+Konfigurationsdatei »%s«
+Konfigurationsdatei »%s« (eigentlich »%s«)
+Jedes Paket konfigurieren, das diesem helfen könnte%s (%s) wird de-konfiguriert ...
+De-konfigurieren von %s (%s), um %s (%s) entfernen zu können ...
+Debian %s Abfragewerkzeug für Paketmanagement-Programm Version %s.
+Debian %s Paket-Trigger Hilfsprogramm Version %s.
+Debian %s Version %s.
+Debian »%s« Paketarchiv-Backend Version %s.
+Debian »%s« Paketmanagement-Programm Version %s.
+Debian »%s« Paket-Aufteil-/Zusammenfüge-Werkzeug; Version %s.
+%s ist entfernt worden.
+Abhängigkeiten und KollisionenBeschreibungGewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
+| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
+         Halb installiert/Trigger erWartet/Trigger anhängig
+|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht)
+Nicht in die Umgebung von Betreuerskripten wechselnBeim Entpacken keine sicheren Ein/Ausgabe-Operationen
+durchführenFehler traten auf beim Bearbeiten von:
+Exit-Status:
+  0 = OK
+  1 = mit --auto, Datei ist kein Teil
+  2 = Probleme
+Datei »%.250s« ist kein Teil eines mehrteiligen Archivs.
+Format-Syntax:
+  Ein Format ist eine Zeichenkette, die für jedes Paket ausgegeben wird. Das
+  Format kann die Standard-Escape-Sequenzen \n (Zeilenvorschub), \r
+  (Wagenrücklauf) oder \\ (einfacher Backslash) enthalten. Paketinformationen
+  können eingefügt werden, indem Variablenreferenzen zu Paketfeldern
+  benutzt werden, die Syntax hierfür ist ${var[;breite]}. Felder werden
+  normalerweise rechtsbündig ausgerichtet; wenn die Breite negativ ist,
+  dann linksbündig.
+Allgemein hilfreiche FortschrittsinformationenEinen fehlenden Status-Override beim Entfernen ignorierenAnforderung, die gemeinsam benutzte Umleitung »%s« zu entfernen, wird ignoriert.
+Anforderung, Datei »%s« umzubenennen, wird ignoriert; die Datei gehört zum umleitendenden Paket »%s«
+Informationen über %d Paket wurden aktualisiert.
+Informationen über %d Pakete wurden aktualisiert.
+Irrsinnige Mengen von GefaselPaket installieren, selbst wenn Authentizitäts-
+überprüfung misslingtInstallieren, selbst wenn es andere Pakete
+beschädigtNebensächliche Pakete installieren oder entfernen,
+selbst wenn auf »halten«Neue Version der Konfigurationsdatei %s wird installiert ...
+Aufruf und Status von Betreuer-SkriptenSinnlose Dateien im Depot-Verzeichnis übriggeblieben:
+»%s« wird beibehalten
+Viele Ausgaben zu Abhängigkeiten und KollisionenViel Gefasel z.B. zum dpkg/info-VerzeichnisViele Ausgaben zu jeder KonfigurationsdateiViele Ausgaben zu jeder verarbeiteten DateiViele Ausgaben bezüglich TriggerMS-DOS-Dateiende (^Z) im Feldnamen »%.*s«MS-DOS-Dateiende (^Z) im Wert des Feldes »%.*s« (fehlender Zeilenvorschub?)Mehr als eine Kopie des Paketes %s wurde in diesem Durchlauf
+ entpackt! Es wird nur einmal konfiguriert.
+NameKeine Umleitung »%s«, keine entfernt.
+Anmerkung: Die Sperrdatei zu entfernen is immer falsch, und kann darin
+enden, den gesperrten Bereich und das gesamte System zu beschädigen.
+Siehe <https://wiki.debian.org/Teams/Dpkg/FAQ>.Beachten Sie: PATH von root sollte normalerweise /usr/local/sbin, /usr/sbin und /sbin enthaltenNichts zu konfigurieren.Veraltetes Conffile »%s« wurde von Ihnen verändert.
+Anbieten, Konf.-Dateien durch nicht neue Versionen
+zu ersetzenOptionen:
+  --admindir <Verzeichnis> Verzeichnis mit der statoverride-Datei setzen.
+  --instdir <Verzeichnis>  Wurzelverzeichnis setzen, aber nicht das
+                             administrative Verzeichnis.
+  --root <Verzeichnis>     Verzeichnis des Wurzeldateisystems setzen.
+  --update                 Zugriffsrechte von <Pfad> sofort aktualisieren.
+  --force                  veralteter Alias für --force-all.
+  --force-<Sache>[,...]    Probleme überstimmen (siehe --force-help).
+  --no-force-<Sache>[,...] Anhalten, wenn Probleme auftauchen.
+  --refuse-<Sache>[,...]   Dito.
+  --quiet                  stille Ausführung, minimale Ausgaben.
+  --help                   diesen Hilfetext anzeigen.
+  --version                Version anzeigen.
+
+Optionen:
+  --admindir=<Verzeichnis>         <Verzeichnis> statt %s verwenden.
+  --by-package=<Paket>             Überstimmen, welches Paket auf Trigger
+                                     wartet (normalerweise von dpkg gesetzt).
+  --await                          Paket muss auf die Verarbeitung warten.
+  --no-await                       Kein Paket muss auf die Verarbeitung warten.
+  --no-act                         Nur testen - nichts tatsächlich ändern.
+
+Optionen:
+  --admindir=<Verzeichnis>         <Verzeichnis> statt %s verwenden.
+  --load-avail                     »available«-Datei in --show und --list
+                                     verwenden.
+  --no-pager                       Keinerlei Pager verwenden.
+  -f|--showformat=<Format>         alternatives Format für --show verwenden.
+
+Optionen:
+  --admindir=<Verzeichnis>   <Verzeichnis> statt %s verwenden.
+  --root=<Verzeichnis>       In anderem Wurzel-Verzeichnis installieren.
+  --instdir=<Verzeichnis>    Installationsverzeichnis ändern, ohne das
+                               admin-Verzeichnis zu ändern.
+  --pre-invoke=<Befehl>      Hook vor dem Aufruf setzen.
+  --post-invoke=<Befehl>     Hook nach dem Aufruf setzen.
+  --path-exclude=<Muster>    Pfade nicht installieren, die auf ein 
+                               Shell-Muster passen.
+  --path-include=<Muster>    Muster nach vorherigem Ausschluss wieder
+                               einschließen.
+  -O|--selected-only         Zur Installation/Aktualisierung nicht
+                               ausgewählte Pakete übergehen.
+  -E|--skip-same-version     Pakete mit identischer installierter Version
+                               übergehen.
+  -G|--refuse-downgrade      Pakete mit früherer als der installierten
+                               Version übergehen.
+  -B|--auto-deconfigure      Installieren, selbst wenn es andere Pakete
+                               beschädigt.
+  --[no-]triggers            Resultierende Triggerverarbeitung übergehen oder
+                               erzwingen.
+  --verify-format=<Format>   Ausgabeformat für Überprüfung
+                               (unterstützt: »rpm«).
+  --no-pager                 Keinerlei Pager verwenden
+  --no-debsig                Nicht versuchen, Paketsignaturen zu prüfen.
+  --no-act|--dry-run|--simulate
+                             Nur sagen, was wir tun würden - nicht ausführen.
+  -D|--debug=<octal>         Debuggen ermögl. (siehe -Dhelp oder --debug=help).
+  --status-fd <n>            Statusänderungen an Dateideskriptor <n> senden.
+  --status-logger=<Befehl>   Statusänderungen an Standardeingabe von <Befehl>
+                               senden.
+  --log=<Datei>              Statusänderungen und Aktionen in <Datei> protokoll.
+  --ignore-depends=<Paket>,...
+                             Abhängigkeiten ignorieren, die <Paket> betreffen.
+  --force-...                Probleme überstimmen (siehe --force-help).
+  --no-force-...|--refuse-...
+                             Stoppen, wenn Probleme auftreten.
+  --abort-after <n>          Nach Auftreten von <n> Fehlern abbrechen.
+
+Optionen:
+  --altdir <Verzeichnis>   Alternativ-Verzeichnis ändern.
+  --admindir <Verzeichnis> administratives Verzeichnis ändern.
+  --instdir <Verzeichnis>  Installations-Verzeichnis ändern.
+  --root <Verzeichnis>     Wurzelverzeichnis des Dateisystems ändern.
+  --log <Datei>            Protokolldatei ändern.
+  --skip-auto              Aufforderung für korrekt konfigurierte
+                           Alternativen im automatischen Modus auslassen
+                           (nur für --config relevant)
+  --quiet                  stille Ausführung, minimale Ausgaben.
+  --verbose                ausführliche Operation, mehr Ausgaben.
+  --debug                  Debug-Ausgabe, wesentlich mehr Ausgaben.
+  --help                   diesen Hilfetext anzeigen.
+  --version                Version anzeigen.
+
+Optionen:
+  --depotdir <Verzeichnis>         <Verzeichnis> statt %s/%s verwenden.
+  -S|--partsize <Größe>            In KiB, für -s (Standard ist 450).
+  -o|--output <Datei>              Dateiname, für -j (Standard ist
+                                     <Paket>_<Version>_<Architektur>.deb).
+  -Q|--npquiet                     Keine Ausgabe, wenn -a kein Teil ist.
+  --msdos                          Dateinamen im 8.3-Format erzeugen.
+
+Optionen:
+  --package <Paket>        Name des Paketes, dessen Kopie von <Datei> nicht
+                             umgeleitet werden wird.
+  --local                  Alle Versionen eines Paketes werden umgeleitet.
+  --divert <divert-to>     Name, der von Versionen anderer Pakete benutzt wird.
+  --rename                 Datei tatsächlich beiseite schieben (oder zurück).
+  --no-rename              Datei nicht beiseite (oder zurück) schieben (Vorgabe).
+  --admindir <Verzeichnis> Verzeichnis mit der diversions-Datei setzen.
+  --instdir <Verzeichnis>  Wurzelverzeichnis setzen, aber nicht das
+                             administrative Verzeichnis.
+  --root <Verzeichnis>     Verzeichnis des Wurzeldateisystems setzen.
+  --test                   nichts tun, nur vorführen, was geschehen würde.
+  --quiet                  stille Ausführung, minimale Ausgaben.
+  --help                   diesen Hilfetext anzeigen.
+  --version                Version anzeigen.
+
+Optionen:
+      --showformat=<Format>        Alternatives Format für --show verwenden.
+  -v, --verbose                    Ausführliche Ausgaben einschalten.
+  -D, --debug                      Debug-Ausgaben einschalten.
+      --deb-format=<Format>        Archiv-Format auswählen.
+                                     Erlaubte Werte: 0.939000, 2.0 (Vorgabe).
+      --nocheck                    Control-Datei-Prüfung auslassen
+                                     (fehlerhafte Pakete bauen).
+      --root-owner-group           Als Eigentümer und Gruppe »root« erzwingen.
+      --[no-]uniform-compression   Die Komprimierungsparameter für alle Elemente
+                                   verwenden.
+  -z#                              Die Komprimierungsstärke beim Bauen setzen.
+  -Z<Typ>                          Den Komprimierungstyp beim Bauen setzen.
+                                     Erlaubte Werte: gzip, xz, none.
+  -S<Strategie>                    Die Komprimierungsstrategie beim Bauen setzen.
+                                     Erlaubte Werte: none, extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Ausgaben zu jeder KonfigurationsdateiAusgaben zu jeder verarbeiteten DateiUmgeleitete Datei mit einer nicht umgeleiteten
+Version überschreibenDatei eines anderen Paketes überschreibenEinen existierenden Status-Override beim
+Hinzufügen überschreibenVerzeichnis eines Paketes mit Datei eines
+anderen überschreibenWichtige Programme nicht in PATH, Probleme wahrsch.PATH ist nicht gesetztPaket %s ist auf »halten«, wird nicht angerührt. Benutzen Sie --force-hold, um es trotzdem zu verarbeiten.
+Paket %s mehr als einmal angegeben, wird nur einmal verarbeitet.
+Paket »%s« enthält keine Dateien(!)
+Pakete noch nicht wieder zusammengefügt:
+Teil %d des Paketes %s abgelegt (benötige noch Pfad»Pre-Depends«-FeldVorbereitung zum Entpacken von %s ...
+Drücken Sie die Eingabetaste, um die aktuelle Wahl[*] beizubehalten,
+oder geben Sie die Auswahlnummer ein: PrioritätSelbst Pakete mit falscher oder fehlender Architektur
+bearbeitenSelbst Pakete mit fehlerhafter Version bearbeitenTrigger für %s (%s) werden verarbeitet ...
+Bearbeitung wurde angehalten, da zu viele Fehler auftraten.
+»Protected«-FeldLöschen der Konfigurationsdateien von %s (%s) ...
+Paket %s wird aus %d Teil zusammengesetzt: Paket %s wird aus %d Teilen zusammengesetzt: Info über %s aus %s aufgezeichnet.
+Ein geschütztes Paket entfernenEin essenzielles Paket entfernenPakete entfernen, die Installation erfordernEntfernen von %s (%s) ...
+»%s« wird entfernt
+Entfernen des veralteten Conffiles %s ...
+Paket durch eine niedrigere Version ersetzenErsetzt durch Dateien in installiertem Paket %s (%s) ...
+Informationen über verfügbare Pakete werden unter Verwendung von %s ersetzt.
+Ersetzen der Dateien im alten Paket %s (%s) ...
+Update-alternatives ausführen, um die Auswahl der System-Alternativen zu verändernSpeichern unter %s ...
+Vormals nicht ausgewähltes Paket %s wird gewählt.
+AuswahlAlle Optionen zum Erzwingen setzen%s (%s) wird eingerichtet ...
+Alberne Mengen an Ausgaben bezüglich TriggerUngültige Zeile wird übersprungen: %sUnbekannte Alternative %s wird übersprungen.Nicht ausgewähltes Paket %s wird übergangen.
+Paket %s wird in %d Teil aufgeteilt: Paket %s wird in %d Teile aufgeteilt: StatusDie folgenden Pakete warten auf die Verarbeitung von Triggern, die sie in
+anderen Paketen aktiviert haben. Diese Verarbeitung kann mit dselect oder
+dpkg --configure --pending (oder dpkg --triggers-only) angefordert werden:
+Die folgenden Pakete befinden sich durch schwere Probleme bei der Installation
+in einem Schlamassel. Sie müssen neu installiert werden, damit sie
+(und alle von ihnen abhängende Pakete) ordnungsgemäß funktionieren:
+Für die folgenden Pakete fehlt die Dateilisten-Datei in der Datenbank,
+sie müssen erneut installiert werden:
+Für die folgenden Pakete fehlt die MD5-Prüfsummen-Datei in der Datenbank,
+sie müssen erneut installiert werden:
+Die folgenden Pakete sind nur halb konfiguriert, wahrscheinlich durch
+Probleme während der ersten Konfiguration. Die Konfiguration sollte mit
+dpkg --configure <Paket> oder mit dem Konfigurations-Menüeintrag in
+dselect erneut versucht werden:
+Die folgenden Pakete sind wegen Problemen während der Installation nur halb
+installiert. Die Installation kann wahrscheinlich durch erneuten Versuch
+beendet werden; die Pakete können mit dselect oder mit dpkg --remove entfernt
+werden:
+Die folgenden Pakete haben keine Architektur:
+Die folgenden Pakete haben eine ungültige Architektur:
+Die folgenden Pakete haben eine unbekannte fremde Architektur, was
+Abhängigkeitsprobleme in Front-Ends hervorrufen wird. Das kann behoben werden,
+indem die fremde Architektur mit »dpkg --add-architecture« hinzugefügt wird:
+Die folgenden Pakete sind getriggert worden, aber die Triggerverarbeitung
+ist noch nicht erfolgt. Triggerverarbeitung kann mit dselect oder
+dpkg --configure --pending (oder dpkg --triggers-only) angefordert werden:
+Die folgenden Pakete wurden entpackt, aber noch nicht konfiguriert.
+Sie müssen mit dpkg --configure oder dem Konfigurations-Menüeintrag in
+dselect konfiguriert werden, damit sie ordnungsgemäß funktionieren:
+Es gibt %d Auswahlmöglichkeit für die Alternative %s (welche %s bereitstellt).Es gibt %d Auswahlmöglichkeiten für die Alternative %s (welche %s bereitstellen).Es gibt kein Programm, welches %s bereitstellt.Es gibt nur eine Alternative in Link-Gruppe %s (die %s bereitstellt): %sDies ist freie Software; lesen Sie die GNU General Public License in der
+Version 2 oder höher für Kopierbedingungen. Es wird KEINE Haftung übernommen.
+Triggeraktivierung und -verarbeitungDinge versuchen zu (de)installieren, selbst wenn
+nicht rootAlle Abhängigkeitsprobleme in Warnungen umwandelnVersionsabhängigkeitsprobleme in Warnungen umwandelnGeben Sie »exit« ein, wenn Sie fertig sind.
+Nutzen Sie dpkg --help für Hilfe zur Installation und Deinst. von Paketen [*];
+Benutzen Sie »apt« oder »aptitude« für benutzerfreundliches Paketmanagement;
+Nutzen Sie dpkg -Dhelp für eine Liste von Debug-Flags von dpkg;
+Nutzen Sie dpkg --force-help für eine Liste von Optionen zum Erzwingen;
+Nutzen Sie dpkg-deb --help für Hilfe zum Manipulieren von *.deb-Dateien;
+
+Optionen mit [*] geben viel aus - schicken Sie es durch »less« oder »more«!Geben Sie dpkg-deb --help für Hilfe zum Verändern von *.deb-Dateien ein;
+geben Sie dpkg --help für Hilfe zum (De-)Installieren von Paketen ein.Geben Sie dpkg-split --help für Hilfe ein.Geben Sie dpkg-trigger --help für Hilfe zu diesem Programm ein.Entpacken von %s (%s) ...
+Entpacken von %s (%s) über (%s) ...
+Informationen über verfügbare Pakete werden unter Verwendung von %s aktualisiert.
+Aufruf: %s [<Option> ...] <Befehl>
+
+Aufruf: %s [<Option>...] <Befehl>
+
+Aufruf: %s [<Option>...] <Trigger-Name>
+        %s [<Option>...] <Befehl>
+
+Verwenden Sie »%s --help« für Informationen zum Programmaufruf.Benutzen Sie »apt« oder »aptitude« für benutzerfreundliches Paketmanagement.
+Verwenden Sie --help für Hilfe zum Umleiten von Dateien.Verwenden Sie --help, um zu erfahren, wie die Statusinformationen von Dateien
+ überschrieben werden können.Verwenden Sie --help für Hilfe zum Abfragen von Paketen.MAC-basierte Security verwenden, falls verfügbarVerwenden Sie dpkg --contents (= dpkg-deb --contents) zum Auflisten von Archivinhalten.
+Verwenden Sie dpkg --info (= dpkg-deb --info) zum Untersuchen von Archiven.
+Verwenden Sie dpkg mit -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+für Archive (siehe %s --help).
+
+Vorgabe für neue Konf.-Dateien benutzen, wenn es eine
+gibt, nicht nachfragen. Wenn Vorgaben nicht
+gefunden werden können, nachfragen, außer confold
+oder confnew ist auch angegeben.Nützliche Umgebungsvariablen:
+Validierbare Sachen: pkgname, archname, trigname, version.
+
+VersionVersion von dpkg mit funktionierender Unterstützung für %s ist noch nicht konfiguriert.
+ Bitte benutzen Sie »dpkg --configure dpkg« und versuchen es danach erneut.
+Beim Hinzufügen ist --local und --divert <Original>.distrib Standard.
+Beim Entfernen müssen --package oder --local oder --divert übereinstimmen,
+falls angegeben. Paket-preinst/postrm-Skripte sollten immer --package
+und --divert angeben.
+%s (%s) würde entfernt oder vollständig gelöscht werden ...
+[Vorgabe=N][Vorgabe=Y][Keine Vorgabe]Administratives Verzeichnis muss unterhalb des Installationsverzeichnisses liegen, damit dpkg korrekt funktioniert»%s« wird ebenfalls konfiguriert (benötigt von »%s«)Alternative %s (Teil der Link-Gruppe %s) existiert nicht;
+sie wird aus der Liste der Alternativen entferntAlternative %s kann kein Master sein: Sie ist ein Slave von %sAlternative %s kann kein Slave von %s sein: Sie ist eine Master-AlternativeAlternative %s kann kein Slave von %s sein: Sie ist ein Slave von %sAlternative %s für %s ist nicht registriert; wird nicht entferntAlternative %s für %s ist nicht registriert; wird nicht gesetztAlternativen-Link %s wird bereits von %s verwaltetAlternativen-Link %s wird bereits von %s (Slave von %s) verwaltetAlternativen-Link ist nicht absolut wie er sein sollte: %sAlternativen-Name (%s) darf kein »/« oder Leerzeichen enthaltenAlternativen-Pfad %s%s existiert nichtAlternativen-Pfad ist nicht absolut wie er sein sollte: %sAlternativen (»|«) sind im Feld »%s« nicht erlaubtmehrdeutiger Paketname »%s« mit mehr als einer installierten Instanzein Fehler ohne eingerichtete Fehlerbehandlung trat aufEin Override für »%s« existiert bereits, wird aber ignoriert, da --force angegeben istEin Override für »%s« existiert bereits, Abbruchjede Umleitung von %sjede Umleitung von %s zu %sLänge des ar-Element-Namen »%s« ist zu langar-Element-Größe %jd ist zu großar-Element-Zeit %jd ist zu groß<leer><keine><unbekannt>Architektur »%s« ist ungültig: %sArchitektur »%s« ist reserviert und kann nicht hinzugefügt werdenArchitekturname »%s« ist ungültig: %sArchiv »%.250s« enthält zwei Control-Elemente, AbbruchArchiv »%s« enthält vorzeitiges Element »%.*s« vor »%s«, AbbruchArchive »%s« ist keine reguläre DateiArchiv »%s« verwendet unbekannte Komprimierung für Element »%.*s«, AbbruchArchiv enthielt Objekt »%.255s« von unbekanntem Typ 0x%xArchiv-control-ElementgrößeArchivdetailfeld »%s« in Statusdatei nicht erlaubtArchiv hat ungültige Formatversion: %sArchiv enthält falsch formatierte control-Elementgröße »%s«Archiv enthält keine Zeilenvorschübe in KopfzeilenArchiv-Informationskopfzeilen-ElementArchiv hat Formatversion %d.%d; installieren Sie ein neueres dpkg-debmagische Archiv-VersionsnummerArchivelement-KopfzeileArchivteilnummernArchivteil-OffsetArchivteilenummerArchiv-Gesamtgrößeautomatischer ModusAutomatische Aktualisierungen von %s/%s sind deaktiviert; wird nicht verändertwartend auf Triggerverarbeitung durch ein anderes PaketLeerzeile im Wert des Feldnamen »%.*s«Boolesches (yes/no) Feld »%s«: %sdefekt durch fehlgeschlagenes Entfernen oder fehlgeschlagene Installationdefekt durch postinst-FehlerEin unbekanntes Paket wird in »%s« gebaut.Paket »%s« wird in »%s« gebaut.Unbekannte Auswahl %s kann nicht installiert werdenPaket-Infodatei »%.255s« kann nicht mit mmap geladen werdenAltes postrm-Skript kann nicht gelöscht werdenPaket-Infodatei »%.255s« kann nicht mit stat abgefragt werdenAuf das Archiv »%s« kann nicht zugegriffen werdenar-Element-Datei (%s) kann nicht an »%s« angehängt werden: %sTeil »%s« des aufgeteilten Paketes kann nicht an »%s« angehängt werden: %sAn »%s« kann nicht angehängt werdenDekompressor-Pipe kann nicht geschlossen werdenMD5-Hash für Datei »%s« kann nicht berechnet werden: %sMD5-Hash für Tar-Datei »%.255s« kann nicht berechnet werden: %sMultibyte-Sequenz »%s« kann nicht in ein Wide-Zeichen umgewandelt werdenMultibyte-Zeichenkette »%s« kann nicht in eine Wide-Zeichenkette umgewandelt werden»%s« kann nicht in Archiv »%s« kopiert werden: %s»%s« kann nicht nach »%s« kopiert werden: %sArchiv-Element kann nicht von »%s« in Dekompressor-Pipe kopiert werden: %sExtrahierte Daten für »%.255s« können nicht nach »%.255s« kopiert werden: %sAdministratives Verzeichnis »%s« kann nicht angelegt werdenAlternativ-Verzeichnis »%s« kann nicht angelegt werdenBasisverzeichnis für %s kann nicht angelegt werdenVerzeichnis %s kann nicht angelegt werdenProtokoll-Verzeichnis »%s« kann nicht angelegt werdenDas dpkg-Datenbank-Verzeichnis %s kann nicht angelegt werdenDas dpkg-Updates-Verzeichnis %s kann nicht angelegt werdenVerzeichnisse können nicht umgeleitet werdenDatei »%s« kann nicht auf sich selbst umgeleitet werdenControl-Datei »%s« kann nicht aus »%s« extrahiert werden: %sTeil »%s« des aufgeteilten Paketes kann nicht extrahiert werden: %sletztes Dateisystem-Änderungsdatum von Paket %s kann nicht ermittelt werdenSicherheits-Markierungs-Handle kann nicht erlangt werdenvarbuf kann nicht auf %zu vergrößert werden; es würde überlaufen%s kann nicht geöffnet werden»%.255s« kann nicht geöffnet werden (in »%.255s«)Archiv-Teildatei »%.250s« kann nicht geöffnet werdenVerzeichnis »%s« kann nicht geöffnet werdenDatei %s kann nicht geöffnet werdenDer Sicherheits-Status-Benachrichtigungskanal kann nicht geöffnet werden%s kann nicht gelesen werdenKonfigurationsdateien-Verzeichnis »%.250s« kann nicht gelesen werden (aus »%.250s«)Info-Verzeichnis kann nicht gelesen werden»%.250s« kann nicht entfernt werdenArchitektur »%s«, derzeit verwendet von der Datenbank, kann nicht entfernt werdenNicht-fremde Architektur »%s« kann nicht entfernt werdenAlte Konfigurations-Sicherungsdatei »%.250s« kann nicht gelöscht werden (aus »%.250s«)Alte Konfigurationsdatei »%.250s« kann nicht entfernt werden (= »%.250s«)Alte Dateiliste kann nicht gelöscht werden»%s« kann nicht in »%s« umbenannt werdenVor-Abhängigkeiten für %.250s können nicht erfüllt werden (angefordert durch %.250s)Verzeichnis »%.255s« kann nicht durchsucht werdenUpdates-Verzeichnis »%.255s« kann nicht eingelesen werdenKein Weg erkennbar, um Vor-Abhängigkeit zu erfüllen:
+ %sPrimäre Gruppen-ID kann nicht auf »root« gesetzt werdenSecurity-Kontext für Dateiobjekt »%s« kann nicht gesetzt werdenSecurity-Ausführungskontext für Betreuerskript kann nicht gesetzt werdenArchiv-control-Elementdaten von »%s« können nicht übersprungen werden: %sArchivelementdaten von »%s« können nicht übersprungen werden: %sDatei »%.255s« (ersetzt oder ausgeschlossen?) kann aus Pipe nicht ausgelassen werden: %sPadding für Datei »%.255s« kann nicht übersprungen werden: %sKopfzeilen des aufgeteilten Paketes für »%s« können nicht übersprungen werden: %s%s kann nicht mit stat abgefragt werden»%.255s« kann nicht mit stat abgefragt werden (in »%.255s«)»%s%s« kann nicht mit stat abgefragt werden»%s« kann nicht mit stat abgefragt werdenPfadname »%s« kann nicht mit stat abgefragt werdenDatei »%s« kann nicht in den Pager geschrieben werdenIn Protokoll-Datei »%s« kann nicht geschrieben werden: %sMögliche Nullen von dpkg-deb am Ende können nicht gelöscht werden: %sZeichen »%c« nicht erlaubt (nur Buchstaben, Ziffern und die Zeichen »%s«)komprimierte Daten sind beschädigttar-Element wird komprimiertConffile »%.250s« kommt nicht im Paket vorAuf Conffile »%.250s« kann kein stat durchgeführt werdenConffile »%s« ist keine gewöhnliche DateiConffile »%s« ist vorhanden, aber zum Entfernen vorgesehenConffile »%s« zum Entfernen beim Upgrade markiert, enthalten im PaketConffile-Unterschied-Darstellerconffile-Datei enthält eine leere ZeileConffile-Dateiname »%s« enthält Leerzeichen am EndeConffile-Name »%s« ist mehrfach vorhandenConffile-Name »%s« ist kein absoluter PfadnameConffile-Name »%s« ist zu lang oder Zeilenvorschub am Ende fehltConffile-Name fehlt nach Flag »%s«Conffile-ShellKonfigurationsfehler: %s:%d: %sAktionen -%c (--%s) und -%c (--%s) stehen in Konfliktkollidierende Umleitungen betreffend »%.250s« und »%.250s«Kollidierende Pakete - %.250s wird nicht installiertDekonfiguration von %s wird in Betracht gezogen, welches durch %s beschädigt würde ...Dekonfiguration des essenziellen Paketes %s
+ wird in Betracht gezogen, um %s zu ermöglichenDekonfiguration des geschützten Paketes %s
+ wird in Betracht gezogen, um %s zu ermöglichenEntfernen von %s zugunsten von %s wird in Betracht gezogen ...Control-Verzeichnis hat falsche Zugriffsrechte %03lo (muss >=0755 und <=0775 sein)Control-Verzeichnis ist kein VerzeichnisControl-Datei »%s« existiert nichtControl-Datei »%s« für Paket »%s« enthält leeren DateinamenAbschließender Zeilenvorschub fehlt in Control-Datei »%s« für Paket »%s«Wert fehlt in Control-Datei »%s« für Paket »%s«Trennzeichen fehlt in Control-Datei »%s« für Paket »%s«control-Datei enthält %ccontrol-Elementbeschädigte Info-Datenbank-Formatdatei »%s«defektes Tar-Dateisystem in PaketarchivProtokoll-Datei »%s« konnte nicht geöffnet werden: %sAlte Datei »%.250s« konnte nicht mit stat abgefragt werden, wird daher nicht gelöscht: %s»%i« konnte nicht für Datenstrom geöffnet werdenAktuelle Alternative %s ist unbekannt, Linkgruppe %s wird zu %s umgeschaltetZyklus bei der Triggerverarbeitung gefunden:
+ Kette der Pakete, deren Trigger verantwortlich sind oder sein könnten:data-ElementDekomprimieren des Archivs »%s« (Größe=%jd), Element »%s«Abhängigkeitsprobleme - Trigger bleiben unverarbeitetAbhängigkeitsprobleme - verbleibt unkonfiguriertAbhängigkeitsprobleme - wird nicht entferntAbhängigkeitsprobleme verhindern Konfiguration von %s:
+%sAbhängigkeitsprobleme verhindern Triggerverarbeitung für %s:
+%sAbhängigkeitsprobleme verhindern Entfernen von %s:
+%süberholte Option »--%s«; bitte verwenden Sie »--%s« stattdessenVeralteter Slave-Link %s wird verworfen (%s)Umleitung durch %s von: %s
+Umleitung durch %s zu: %s
+Umleitung von %s durch %sUmleitung von %s zu %s durch %sName der Umleitung darf keine Zeilenvorschübe enthaltenumgeleitet durch %s zu: %s
+Datei »%s« aus einem essenziellen Paket mit »rename« umzuleiten
+ist gefährlich, verwenden Sie »--no-rename«fertig
+Version %2$.250s des Paketes %1$.250s wird durch ältere Version %3$.250s ersetztdpkg-Datenbank-Sperredpkg-Frontend-Sperredpkg ist nicht als installiert vermerkt, Unterstützung für %s kann nicht überprüft werden!
+doppeltes erwartetes Triggerpaket »%.255s«doppeltes Dateitrigger-Interesse für Dateiname »%.250s« und Paket »%.250s«doppelter Pfad %sdoppelter anhängiger Trigger »%.255s«doppelter Slave-Link %sdoppelter Slave-Name %sdoppelter Wert für Feld »%s«doppelter Wert für benutzerdefiniertes Feld »%.*s«Leere Zeilen und solche, die nur Leerzeichen enthalten, sind in Conffiles nicht erlaubtleeres Archivdetailfeld »%s«leerer Feldnameleere Zeichenkette von fgets beim Lesen aus conffilesleere Triggernamen sind nicht erlaubtleerer Wert für Feld »%s«Dateiende nach Feldname »%.*s«Dateiende vor einem Wert für das Feld »%.*s« (abschließender Zeilenvorschub fehlt)Dateiende im Wert des Feldes »%.*s« (fehlender abschließender Zeilenvorschub)Dateiende von Standardeingabe an der Conffile-EingabeaufforderungEpochenEpoche in der Version ist leerEpoche in der Version ist negativEpoche in der Version ist keine ZahlEpoche in der Version ist zu großFehlerFehler beim Überprüfen von »%s«Fehler beim Schließen von %.250sFehler beim Schließen der Konfigurationsdatei »%.255s«Fehler beim Schließen/Schreiben von »%.255s«Fehler beim Anlegen des Geräts »%.255s«Fehler beim Anlegen des Verzeichnisses »%.255s«Fehler beim Anlegen des harten Links »%.255s«Fehler beim Anlegen der neuen Sicherungsdatei »%s«Fehler beim Anlegen der Pipe »%.255s«Fehler beim Anlegen des symbolischen Links »%.255s«Fehler beim Sicherstellen, dass »%.250s« nicht existiertFehler beim Ausführen des Hooks »%s«, Exitkode %dFehler beim Formatieren von Zeichenkette in varbuf-VariableFehler im Anzeigeformat: %sFehler beim Installieren der neuen Datei »%s«Fehler beim Öffnen der conffiles-DateiFehler beim Öffnen des Konfigurationsverzeichnisses »%s«Fehler beim Bearbeiten des Archivs %s (--%s):
+ %sFehler beim Bearbeiten des Paketes %s (--%s):
+ %sFehler beim Lesen von %.250sFehler beim Lesen von %s aus Datei %.255sFehler beim Lesen der conffiles-DateiFehler beim Lesen aus der dpkg-deb-PipeFehler beim Lesen der Datei zurückgestellter Trigger %.250sFehler beim Entfernen der alten Sicherungsdatei »%s«Fehler beim Setzen des Eigentümers von »%.255s«Fehler beim Setzen des Eigentümers des symbolischen Linkss »%.255s«Fehler beim Setzen der Zugriffsrechte von »%.255s«Fehler beim Setzen der Zeitstempel von »%.255s«Fehler beim Versuch, %.250s zu öffnenFehler beim nicht-mehr-Abfangen des Signals %s: %s
+Fehler beim AufräumenFehler beim Schreiben von »%s«Fehler beim Schreiben von »%s«Fehler beim Schreiben von »%s«Fehler beim Schreiben der ArchitekturlisteFehler beim Schreiben auf Standard-Fehlerausgabe, entdeckt vor Conffile-EingabeaufforderungSpeicherzuweisung fehlgeschlagenSpeicherzuweisung für neuen Eintrag in Liste fehlgeschlagener Pakete fehlgeschlagen: %sWechsel in das Verzeichnis »%.255s« fehlgeschlagenWechsel in das Verzeichnis fehlgeschlagenchroot nach »%.250s« fehlgeschlagenSchließen nach dem Lesen fehlgeschlagen: »%.255s«Anlegen eines Verzeichnisses fehlgeschlagenPipe konnte nicht angelegt werdendup fehlgeschlagen für Dateideskriptor %ddup fehlgeschlagen für std%sAbfragen von ar-Element-Datei (%s) mit fstat fehlgeschlagenAbfragen des Archivs mit fstat fehlgeschlagenAbfragen der diversions-Datei mit fstat fehlgeschlagenAbfragen der statoverride-Datei mit fstat fehlgeschlagenErstellen von temporärer Datei fehlgeschlagen (%s)Öffnen der Konfigurationsdatei »%.255s« zum Lesen fehlgeschlagen: %sÖffnen der diversions-Datei fehlgeschlagenÖffnen der Paket-Infodatei »%.255s« zum Lesen fehlgeschlagenÖffnen der statoverride-Datei fehlgeschlagenÖffnen der Trigger-Interessen-Listendatei »%.250s« fehlgeschlagenEs konnte nicht gelesen werdenLesen von »%.255s« fehlgeschlagen (in »%.255s«)Lesen von Archiv »%.255s« fehlgeschlagenLöschen der eingebundenen Update-Datei %.255s fehlgeschlagenLöschen der eigenen Update-Datei %.255s fehlgeschlagenZurücksetzen von temporärer Datei fehlgeschlagen (%s)Zurücksetzen der Trigger-Interessendatei »%.250s« fehlgeschlagenPositionierung fehlgeschlagenAbfrage mit stat (Dereferenzierung) für existierenden Symlink »%.250s« fehlgeschlagenAbfrage mit stat (Dereferenzierung) für vorgeschlagenes neues Symlink-Ziel »%.250s« von Symlink »%.250s« fehlgeschlagenAbfragen von temporärer Datei (%s) mit fstat fehlgeschlagenunlink von temporärer Datei fehlgeschlagen (%s), %sEs konnte nicht geschrieben werdenSchreiben des %s-Datensatzes über »%.50s« nach »%.250s« fehlgeschlagenSchreiben der Details über »%.50s« nach »%.250s« fehlgeschlagenSchreiben eines Dateinamens in tar-Pipe fehlgeschlagen (%s)fgets lieferte eine leere Zeichenkette aus »%.250s«Feldname »%.*s« kann nicht mit einem Bindestrich beginnennach Feldname »%.*s« muss ein Doppelpunkt folgenFeldbreite ist außerhalb des WertebereichsDatei »%.250s« hat ungültige Formatversion: %sDatei »%.250s« ist defekt - %.250s fehltDatei »%.250s« ist defekt - falsche MD5-Prüfsumme »%.250s«Datei »%.250s« ist defekt - falsche magische Archiv-KopfzeileDatei »%.250s« ist defekt - falsche ArchivteilnummerDatei »%.250s« ist defekt - falsche Ziffer (Code %d) in %sDatei »%.250s« ist defekt - falsche Kennung am Ende der ersten KopfzeileDatei »%.250s« ist defekt - falsche Kennung am Ende der zweiten KopfzeileDatei »%.250s« ist defekt - falsche Anzahl der ArchivteileDatei »%.250s« ist defekt - falsches Auffüll-Zeichen (Code %d)Datei »%.250s« ist defekt - fehlender Zeilenvorschub nach %.250sDatei »%.250s« ist defekt - kein Schrägstrich zwischen den ArchivteilnummernDatei »%.250s« ist defekt - Nullen im Info-BereichDatei »%.250s« ist defekt - zweites Element ist kein DatenelementDatei »%.250s« ist defekt - falsche Größe für angegebene Teil-NummerDatei »%.250s« ist defekt - zu kurzDatei »%.250s« ist defekt - falsche Anzahl der Teile für angegebene GrößenDatei »%.250s« hat Formatversion %d.%d; installieren Sie ein neueres dpkg-splitDatei »%.250s« ist kein Debian-Binärarchiv (dpkg-split probieren?)Datei »%.250s« ist kein Archiv-TeilDatei »%s« ist defekt; Ganzzahl außerhalb des Wertebereichs in %sDatei »%s« ist kein Teil eines Archivs
+Dateiformat nicht erkanntDatei könnte ein Archiv sein, das durch
+ einen Download im ASCII-Modus beschädigt wurdeDateiname darf keine Zeilenvorschübe enthaltenDateitrigger-Datensatz erwähnt ungültigen Paketnamen »%.250s« (für Interesse an Datei »%.250s«): %.250sDateiname »%s« ist nicht absolutDateien »%.250s« und »%.250s« sind nicht Teile derselben DateiDateilisten-Datei des Paketes »%.250s« enthält leeren DateinamenAbschließender Zeilenvorschub fehlt in Dateilisten-Datei des Paketes »%.250s«Dateilisten-Datei des Paketes »%.250s« fehlt; es wird angenommen,
+ dass das Paket derzeit keine Dateien installiert haterstes (Gewünscht-)Wort im Feld »%s«: %sNeuinstallation der Alternative %s ist erzwungen, weil Linkgruppe %s defekt istfork fehlgeschlagenFormatversion gefolgt von UnsinnFormatversion enthält keinen PunktFormat-VersionsnummerFormatversion mit leerer HauptkomponenteFormatversion mit leerer UnterkomponenteFormatversion mit zu großer HauptkomponenteFormatversion mit zu großer Unterkomponenteunbekannte Pakete wurden gefunden; dies könnte bedeuten, dass die
+»available«-Datenbank veraltet ist und durch eine Frontend-Methode
+aktualisiert werden muss; bitte ziehen Sie die FAQ
+<https://wiki.debian.org/Teams/Dpkg/FAQ> zu Rate.Beschädigte ar-Kopfzeilen für »%s« erzeugtGruppe »%s« existiert nichthat ungültigen Wert »%.50s«enthält Unsinn am EndeKopfzeile ist zu lang, wodurch der Teil zu lang wird; Ihr Paketname oder die
+Versionsnummer muss außerordentlich lang sein, oder so; Abbruch%d Warnung wegen der control-Datei(en) wird ignoriert%d Warnungen wegen der control-Datei(en) werden ignoriertBeschädigung wird ignoriert, es wird versucht, trotzdem fortzusetzen!Kollision wird ignoriert, es wird versucht, trotzdem fortzusetzen!Abhängigkeitsproblem mit %s wird ignoriert:
+%sVor-Abhängigkeitsproblem wird ignoriert!Die Anforderung, %.250s zu entfernen, wird ignoriert; es ist nicht installiertAnforderung zum Löschen von %.250s wird ignoriert, von dem nur noch die
+ Konf.-Dateien auf dem System sind; benutzen Sie --purge, um diese zu löschenungültiger Architekturname in Spezifizierer »%s:%s«: %sungültiger Name des erwarteten Paketes »%.250s«: %.250sungültiger Paketname in Zeile %d: %.250sungültiger Paketname in erwartetem Trigger »%.255s«: %sungültiger Paketname in Spezifizierer »%s%s%s«: %sungültiger anhängiger Triggername »%.255s«: %sInfo-Datenbank-Format (%d) ist falsch oder zu neu; versuchen Sie, ein neueres dpkg zu erhaltenInfodatei %s/%s gehört zu keinem PaketInstallation von »%.250s«installiertinstalliertes %2s-Skript des Paketes %1sInstallation von %.250s würde %.250s beschädigen, und
+ Dekonfiguration ist nicht erlaubt (--auto-deconfigure könnte helfen)Installation von %.250s würde existierende Software beschädigeninterner Fehlerinterner Fehler (Bug)ungültiges Zeichen »%c« in Größe von Archiv »%.250s«, Element »%.16s«ungültiges Zeichen »%c« in Feldbreiteungültiges Zeichen in Revisionsnummerungültiges Zeichen in Versionsnummerungültiger Kompressionslevel für -%c: »%ld«ungültige Kompressorparameter: %sungültige deb-Format-Version: %sungültige Ganzzahl für -%c: »%.250s«ungültige Ganzzahl für --%s: »%.250s«ungültige oder unbekannte Syntax in Triggername »%.250s« (in Trigger-Interessen für Paket »%.250s«)ungültiger Paketname »%.250s« in Datei zurückgestellter Trigger »%.250s«ungültiger Paketname im Feld »%s«: %sungültige Statoverride-GID %sungültiger Statoverride-Modus %sungültige Statoverride-UID %sungültiger Statusungültige Tar-Kopfteil-Prüfsummeungültiges Prüfsumme-Feld in Tar-Kopfteilungültiges GID-Feld in Tar-Kopfteilungültiges Mtime-Feld in Tar-Kopfteilungültiges Größenfeld in Tar-Kopfteilungültiges UID-Feld in Tar-Kopfteilungültiger Tar-Kopfteil mit leerem Namensfeldungültiger Triggername »%.250s«: %.250sfehlt ein WertZeile nicht beendet beim Versuch, %s zu lesenZeile zu lang oder nicht beendet beim Versuch, %s zu lesenZeile mit Conffile-Dateiname »%s« enthält Leerzeichen am EndeLink %s ist sowohl primär als auch slaveLaden der Control-Datei »%s« für Paket »%s«Laden der Dateilisten-Datei des Paketes »%s«lokale Umleitung von: %s
+lokale Umleitung von %slokale Umleitung von %s zu %slokale Umleitung zu: %s
+lokal umgeleitet zu: %s
+lange DateinamenBetreuerskript »%.50s« hat falsche Zugriffsrechte %03lo (muss >=0555 und <=0775 sein)Betreuerskript »%.50s« ist keine gewöhnliche Datei oder symbolischer LinkAuf Betreuerskript »%.50s« kann kein stat durchgeführt werdenmalloc fehlgeschlagen (%zu Byte)manueller ModusMaster-DateiMaster-LinkEs könnte Probleme geben, %s zu entfernen, da es %s bereitstellt ...darf keine leere Zeichenkette seinSpeicherverbrauchsgrenze erreichtKeine Übereinstimmung mit Ziel für Umleitung
+  beim Entfernen von »%s«
+  »%s« gefundenKeine Übereinstimmung mit Paket
+  beim Entfernen von »%s«
+  »%s« gefundenfehlendes Feld »%s«fehlende schließende geschweifte Klammergemischte zusammen installierbare und nicht zusammen installierbare
+ Paketinstanzen vorhanden; sehr wahrscheinlich aufgrund eines Upgrades
+ von einer inoffziellen dpkg-VersionMulti-Archmehrere Kollisionen und Ersetzungenmehrere nicht zusammen installierbare Paketinstanzen vorhanden; sehr
+ wahrscheinlich aufgrund eines Upgrades von einer inoffziellen dpkg-VersionMehrere Status-Overrides für Datei »%.250s« vorhandenMuss von einem Betreuerskript aufgerufen werden (oder mit einer --by-package Option)muss mit alphanumerischem Zeichen beginnenmuss mit alphanumerischem Zeichen beginnenName %s ist sowohl primär als auch slave--%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s oder --%s wird benötigteine Aktions-Option wird benötigtneues %2s-Skript des Paketes %1sZeilenvorschub im Feldnamen »%.*s«Zeilenvorschub nicht erlaubt in Archiv-Objektname »%.255s«Zeilenvorschub nicht erlaubt in Pfadname »%s«Zeilenvorschübe sind in update-alternatives-Dateien (%s) verbotenkeine »control«-Datei im control-Archiv!keine Alternativen für %skein Override vorhandenkeine Paketinformationen in »%.255s«Kein Paket namens »%s« installiert, kann nicht konfiguriert werdenKein Paket gefunden, das auf %s passtKein Pfad gefunden, der auf Muster %s passtdpkg: Nein, %s ist essenziell, es wird nicht dekonfiguriert werden,
+ um %s zu ermöglichendpkg: Nein, %s ist geschützt, es wird nicht dekonfiguriert werden,
+ um %s zu ermöglichenNein, fortfahren mit %s nicht möglich (--auto-deconfigure wird helfen):
+%sInhalte des Control-Bereiches werden nicht überprüftNicht genug Privilegien, das Wurzelverzeichnis mit --force-not-root zu ändern, vielleicht sollten Sie --force-script-chrootless verwenden?nicht installiertnicht installiert, aber Konfigurationsdateien verbleiben%s wird nicht entfernt, da sie kein Symlink ist%s wird nicht durch einen Link ersetztnichts hinter Doppelpunkt in Versionsnummerleerer Paketname in kommagetrennter --%s-Liste »%.250s«Anzahl der Archivteileveraltetes Feld »%s« verwendetveraltete Option »--%s«, nicht verfügbare Pakete werden automatisch aufgeräumtveralteter Komprimierungstyp »%s«; verwenden Sie xz stattdessenveralteter Komprimierungstyp »%s«; verwenden Sie xz oder gzip stattdessenveraltete force/refuse-Option »%s«veraltete Option »--%s«altes %2s-Skript des Paketes %1sAltes Conffile »%.250s« war ein leeres Verzeichnis (und wurde jetzt gelöscht)Alte Datei »%.250s« ist die gleiche wie mehrere neue Dateien! (sowohl »%.250s« als auch »%.250s«)Alte Version des Paketes hat übermäßig langen Info-Dateinamen beginnend mit »%.250s«Nur genaue Versionen können für Feld »%s« benutzt werdenÖffnen der Komponente »%.255s« (in %.255s) in unerwarteter Weise fehlgeschlagenZu wenig Speicher für neuen AufräumeintragZu wenig Speicher für neuen Aufräumeintrag mit vielen ArgumentenZu wenig Speicher für neuen Fehlerkontextaußerhalb des Fehlerkontexts, AbbruchProblem wird übergangen, weil --force angegeben ist: Paket %.250s ist schon installiert und konfiguriertPaket %.250s ist nicht bereit zur Konfiguration
+ kann nicht konfiguriert werden (momentaner Status »%.250s«)Paket %.250s ist nicht bereit zur Triggerverarbeitung
+ (momentaner Status »%.250s« ohne anhängige Trigger)Paket %s %s kann nicht konfiguriert werden, da %s in einer anderen Version vorliegt (%s)Paket %s (%s) mit Feld »%s: %s« kann nicht zusammen mit %s installiert werden, welches mehrere installierte Instanzen hatPaket %s kann nicht konfiguriert werden, da %s nicht bereit ist (aktueller Status »%s«)Paket %s enthielt Liste als Info-DateiPaket %s erfordert Neuinstallation, wird aber wie gefordert trotzdem entferntPaket %s muss neu installiert werden, es wird nicht entferntPaket %s war auf »halten«, wird wie gefordert dennoch verarbeitetPaket »%s« ist nicht verfügbarPaket »%s« ist nicht installiertPaket »%s« ist nicht installiert und es ist keine Information verfügbarPaketarchitekturPaket-Architektur (%s) passt nicht zum System (%s)Paketarchitektur fehlt oder ist leerPaket enthält übermäßig langen Control-Info-Dateinamen (beginnend mit »%.50s«)Paket-Control-Info enthielt Verzeichnis »%.250s«Paket-Control-Info rmdir von »%.250s« ergab nicht, dass dies kein Verzeichnis istPaket-control-InformationsextraktionPaket leitet andere um zu: %s
+Paket-FeldwertextraktionMD5-Prüfsumme der PaketdateiPaket-Dateisystemarchiv-ExtraktionPaket hat Feld »%s«, ist aber Architektur »%s«Paket hat Feld »%s«, aber fehlende ArchitekturPaket hat Status %s und hat Conffiles, vergesse siePaket hat Status %s, aber keine Trigger werden erwartetPaket hat Status %s, aber keine Trigger sind anhängigPaket hat Status %s, aber Trigger werden erwartetPaket hat Status %s, aber Trigger sind anhängigPaket ist in einem sehr schlechten inkonsistenten Zustand - Sie sollten
+ es erneut installieren, bevor Sie es zu entfernen versuchen.Paket ist in einem sehr schlechten inkonsistenten Zustand - Sie sollten es
+ nochmal installieren, bevor Sie die Konfiguration versuchen.Paketname darf keine Zeilenvorschübe enthaltenPaketnamePaketname »%s« ist ungültig: %sPaketname hat Zeichen, die keine Kleinbuchstaben, Ziffern oder »-+.« sindPaket nicht in der »status«- oder »available«-Datenbank in Zeile %d: %.250sPaketsignatur-ÜberprüfungPaket-VersionsnummerPager zum Anzeigen der DateiParsen der Datei »%.255s«, nahe Zeile %d:
+ Parsen der Datei »%s«, nahe Zeile %d Paket »%s«:
+ Teil %d fehltTeildatei »%.250s« ist keine gewöhnliche DateiTeilgröße ist viel zu groß oder nicht positiv.Teilgröße muss mindestens %d KiB sein (für die Kopfzeilen)teilweise gelesener Tar-Kopfteilbestanden
+einfügenPfad darf keine Zeilenvorschübe enthaltenBitte geben Sie »--no-rename« explizit an, die Vorgabe wird in 1.20.x
+auf »--rename« geändert werdenVor-Abhängigkeitsproblem - %.250s wird nicht installiertPrioritätPriorität ist außerhalb des WertebereichsPriorität muss eine Ganzzahl seinPriorität von %s ist außerhalb des Wertebereichs: %sPriorität von %s: %sQuadstate (foreign/allowed/same/no) Feld »%s«: %sLesefehler in %.250sLesefehler in »%.250s«Lesefehler in Konfigurationsdatei »%.255s«Lesefehler auf der StandardeingabeFehler beim Lesen von Standardeingabe an der Conffile-EingabeaufforderungLesen der Paket-Infodatei »%.255s«Lesen der Paket-Infodatei »%s«: %sLesen der statoverride-Datei »%.250s«Paketdatei wieder zusammengefügtVor-Abhängigkeitsproblem betreffend %s, welches %s enthält:
+%sBetreffend %s, welches %s enthält:
+%sEntfernen von %.250sArchitektur »%s«, derzeit verwendet von der Datenbank, wird entferntManuell ausgewählte Alternative wird entfernt - Umschaltung von %s in Auto-ModusUmbenennen beinhaltet Überschreiben von »%s« mit
+  anderer Datei »%s«, nicht erlaubtrename: Entfernen des doppelten alten Links »%s«%s-Link wird von %s%s in %s%s umbenannt%s-Slave-Link wird von %s%s in %s%s umbenanntAngeforderte Operation benötigt Superuser-RechteLese-/Schreibzugriff für dpkg-Datenbank-Verzeichnis %s benötigtFür eine große Verfügbarkeits-Aktualisierung ist Schreibzugriff auf das
+dpkg-Datenbank-Verzeichnis »%s« erforderlichRevisionsnummer ist leerrm-Befehl zum AufräumenWurzel- oder leeres Verzeichnis ist als Conffile in Feld »%s« aufgeführtdurchsucht, aber keine Pakete (auf *.deb passende Dateien) gefundenzweites (Fehler-)Wort im Feld »%s«: %s<unbekannt>Automatische Auswahl von %s wird eingerichtetmehrere Paketinfo-Einträge gefunden, nur einer erlaubtShellbefehl, um Dateien zu verschiebenAnzeige der Paketliste im PagerErstellung von %s wird übersprungen, weil die zugehörige Datei %s (der Link-Gruppe %s) nicht existiertSlave-DateiSlave-LinkSlave-Link ist derselbe wie Haupt-Link %sSlave-NameQuelldatei »%.250s« ist keine gewöhnliche DateiZusammenfügung des aufgeteilten Paketesstatoverride-Datei enthält leere ZeileAbschließender Zeilenvorschub fehlt in statoverride-DateiStatusStatusloggerEntfernen von abschließendem(n) /Unterprozess %s gab den Fehlerwert %d zurückGröße des symbolischen Links »%.250s« wurde von %jd zu %zd geändertSyntaxfehler in Dateitrigger-Datei »%.250s«Syntaxfehler in statoverride-DateiSyntaxfehler in Datei zurückgestellter Trigger »%.250s« in Zeile %d Zeichen %zd »%s«akzeptiert nur ein Argument, den Namen des TriggersZiel ist ein Verzeichnis - kann Control-Datei-Überprüfung nicht übergehenes sind mehrere Versionen des Teils %d vorhanden - mindestens »%.250s« und »%.250s«Es gibt kein Skript in der neuen Version des Paketes - Abbruchdrittes (Status-)Wort im Feld »%s«: %sDies ist ein geschütztes Paket - es sollte nicht entfernt werden.Dies ist ein essenzielles Paket - es sollte nicht entfernt werden.Um zu automatischen Aktualisierungen zurückzukehren,
+verwenden Sie »%s --auto %s«zu wenige Werte in dem Archivdetailfeld »%s« (im Vergleich zu anderen)Zu viele Fehler, Abbruchzu viele verschachtelte Fehler während der Fehlerbehebungzu viele Werte in dem Archivdetailfeld »%s« (im Vergleich zu anderen)zu lange Zeile oder fehlender Zeilenvorschub in »%.250s«Treewalk-Wurzel %s ist kein VerzeichnisSyntaxfehler in Trigger-Interessendatei »%.250s«; ungültiger Paketname »%.250s«: %.250sTriggername »%s« ist ungültig: %sTriggername enthält ungültiges ZeichenTrigger-Datensätze existieren noch nichtgetriggertci-Triggerdatei »%.250s« enthält ungültige Triggersyntax im Triggernamen »%.250s«: %.250sci-Triggerdatei enthält unbekannte Anweisung »%.250s«ci-Triggerdatei enthält unbekannte AnweisungssyntaxTrigger-Datenverzeichnis noch nicht angelegtTrigger-Datenbank-SperreTrigger bilden eine Schleife, aufgegebenstattdessen wird Skript aus dem neuen Paket probiert ...Versuch, »%.250s« zu überschreiben, welches auch in Paket %.250s %.250s istVersuch, »%.250s« zu überschreiben, welches die umgeleitete Version von »%.250s« istVersuch, »%.250s« zu überschreiben, welches die umgeleitete Version von »%.250s« (Paket: %.100s) istVersuch, Verzeichnis »%.250s« in Paket %.250s %.250s mit Nichtverzeichnis zu überschreibenVersuch, gemeinsam benutztes »%.250s« zu überschreiben, welches verschieden von anderen Instanzen des Paketes %.250s istZwei Befehle angegeben: --%s und --%sEingabe-Teildatei »%.250s« kann nicht (wieder) geöffnet werdenFür eine große Verfügbarkeits-Aktualisierung kann nicht auf das
+dpkg-Datenbank-Verzeichnis »%s« zugegriffen werdenAuf das dpkg-Datenbank-Verzeichnis %s kann nicht zugegriffen werdenEigentümer der Zieldatei »%.250s« kann nicht geändert werdenDie Existenz von »%.250s« kann nicht überprüft werdenSperrstatus der Datei »%s« kann nicht überprüft werdenExistenz des Archivs »%.250s« kann nicht überprüft werdenSperrdatei für dpkg-Datenbank-Verzeichnis »%s« kann nicht überprüft werdenEigentümer des symbolischen Links zur Sicherung von »%.255s« kann nicht gesetzt werdenUnordnung um »%.255s« kann vor der Installation einer anderen Version nicht bereinigt werdenDatei »%s« kann nicht geschlossen werdenNeue Datei »%.250s« kann nicht geschlossen werdenNeue Datei zurückgestellter Trigger »%.250s« kann nicht geschlossen werdenAktualisierter Status von »%.250s« kann nicht geschlossen werden»%.255s« kann nicht angelegt werden»%.255s« konnte nicht angelegt werden (während der Verarbeitung von »%.255s«)Datei »%s« kann nicht angelegt werdenNeue Datei »%.250s« kann nicht angelegt werdenAnlegen des temporären Verzeichnisses fehlgeschlagenTrigger-Statusverzeichnis »%.250s« kann nicht angelegt werdenDie Control-Info-Datei »%.250s« kann nicht gelöscht werdenAltes Verzeichnis »%.250s« kann nicht gelöscht werden: %sAufgebrauchte Depotdatei »%.250s« kann nicht gelöscht werden»%.250s« kann nicht verworfen werden%s (%s) kann nicht ausgeführt werden%.250s kann nicht aufgefüllt werdenPufferleerung von %.250s nach Auffüllen nicht möglichDatei »%s« kann nicht zurückgeschrieben werdenNeue Datei »%.250s« kann nicht zurückgeschrieben werdenPuffer des aktualisierten Status von »%.250s« kann nicht geleert werdenQuelldatei kann nicht mit fstat abgefragt werdenAktualisierter Status von »%.250s« kann nicht synchronisiert werdenDateideskriptor für Verzeichnis »%s« kann nicht erlangt werdenSignal %s kann vor Ausführung von %.250s nicht ignoriert werden»%.250s« kann nicht als »%.250s« installiert werdenNeue (vermeintliche) Info-Datei »%.250s« kann nicht installiert werdenNeue Info-Datei »%.250s« kann nicht als »%.250s« installiert werdenNeue Datei zurückgestellter Trigger »%.250s« kann nicht installiert werdenNeue Version von »%.255s« kann nicht installiert werdenAktualisierter Status von »%.250s« kann nicht installiert werden%s kann nicht gesperrt werdenLink zur Sicherung von »%.255s« vor Installation der neuen Version kann nicht angelegt werdenSymbolischer Link zur Sicherung von »%.255s« kann nicht angelegt werden»%.255s« kann nicht aus dem Weg geräumt werden, um neue Version zu installieren»%.255s« kann nicht geöffnet werdenVerzeichnis »%s« kann nicht geöffnet werdenDatei »%s« kann nicht geöffnet werdenNeue Depot-Datei »%.250s« kann nicht geöffnet werdenAusgabedatei »%.250s« kann nicht geöffnet werdenQuelldatei »%.250s« kann nicht geöffnet werdenTemporäres Control-Verzeichnis kann nicht geöffnet werdenci-Triggerdatei »%.250s« kann nicht geöffnet werdenDatei zurückgestellter Trigger »%.250s« kann nicht geöffnet werdenSperrdatei der dpkg-Datenbank für Verzeichnis %s kann nicht geöffnet/angelegt werdenSperrdatei des dpkg-Frontends für Verzeichnis %s kann nicht geöffnet/angelegt werdenNeue Datei zurückgestellter Trigger »%.250s« kann nicht geöffnet/angelegt werdenTrigger-Sperrdatei »%.250s« kann nicht geöffnet/angelegt werdenZeitstempel »%.255s« kann nicht ausgewertet werdenDepot-Verzeichnis »%.250s« kann nicht gelesen werdenDateitrigger-Datei »%.250s« kann nicht gelesen werdenDateideskriptorflags für »%.250s« können nicht gelesen werdenLink »%.255s« kann nicht gelesen werdenLink »%s%.255s« kann nicht gelesen werdenTeildatei »%.250s« kann nicht gelesen werden»%s« kann nicht entfernt werdenSicherungs-Version von »%.250s« kann nicht entfernt werdenKopierte Quelldatei »%s« kann nicht entfernt werdenSoeben entpackte Version von »%.250s« kann nicht entfernt werdenSoeben installierte Version von »%.250s« kann nicht entfernt werdenSoeben installierte Version von »%.250s« kann nicht entfernt werden, um die Reinstallation der Sicherungskopie zu ermöglichenVeraltete Info-Datei »%.250s« kann nicht entfernt werdenNeue Depot-Datei »%.250s« kann nicht in »%.250s« umbenannt werdenTeildatei »%.250s« kann nicht wieder geöffnet werdenSicherungs-Version von »%.250s« kann nicht wiederhergestellt werden»%.250s« kann nicht auf sichere Weise entfernt werden»%.255s« kann nicht auf sichere Weise entfernt werdenAlte Datei »%.250s« kann nicht auf sichere Weise entfernt werden: %sNach Auffüllen kann nicht zum Start von %.250s gesprungen werdenPufferung für die %s-Datenbankdatei kann nicht gesetzt werden»close-on-exec«-Flag für »%.250s« kann nicht gesetzt werdenAusführrechte für »%.250s« können nicht gesetzt werdenZugriffsrechte der Zieldatei »%.250s« können nicht gesetzt werdenUmgebungsvariablen für Betreuerskript können nicht mit setenv gesetzt werdenUmgebungsvariablen für Unterprozesse können nicht mit setenv gesetzt werden%s »%.250s« kann nicht mit stat abgefragt werden%s »%.250s« kann nicht mit stat abgefragt werden: %s»%.250s« kann nicht mit stat abgefragt werden»%.255s« (was gerade installiert werden sollte) konnte nicht mit stat abgefragt werdenControl-Verzeichnis kann nicht mit stat abgefragt werdenDerzeit installiertes Conffile »%.250s« kann nicht mit stat abgefragt werdenNeu verteiltes Conffile »%.250s« kann nicht mit stat abgefragt werdenAndere neue Datei »%.250s« kann nicht mit stat abgefragt werdenWiederhergestelltes »%.255s« kann vor der Installation einer anderen Version nicht mit stat abgefragt werdenQuelldatei »%.250s« kann nicht mit stat abgefragt werdenDatei zurückgestellter Trigger »%.250s« kann nicht mit stat abgefragt werdenVerzeichnis »%s« kann nicht synchronisiert werdenDatei »%.255s« kann nicht synchronisiert werdenDatei »%s« kann nicht synchronisiert werdenNeue Datei »%.250s« kann nicht synchronisiert werdenFür aktualisierten Status von »%.250s« kann nicht abgeschnitten werden%s kann nicht entsperrt werdenDatei »%s« kann nicht geschrieben werdenNeue Datei »%.250s« kann nicht geschrieben werdenNeue Datei zurückgestellter Trigger »%.250s« kann nicht geschrieben werdenNach Status-Dateideskriptor %d kann nicht geschrieben werdenAktualisierter Status von »%.250s« kann nicht geschrieben werdenunausgeglichene Anführungszeichen in »%s«unerwarteter bzip2-Fehlerunerwartete Daten nach Paket und Auswahl in Zeile %dunerwartetes Dateiende nach Paketnamen in Zeile %dunerwartetes Dateiende vor Ende der Zeile %dunerwartetes Dateiende in %s in %.255sunerwartetes Dateiende im Paketnamen in Zeile %dUnerwartetes Ende der Datei oder des DatenstromsUnerwartetes Dateiende beim Lesen von »%.250s«unerwartetes Dateiende beim Versuch, %s zu lesenunerwartetes Ende der Eingabeunerwartetes Zeilenende nach Paketnamen in Zeile %dunerwartetes Zeilenende im Paketnamen in Zeile %dunerwartetes Zeilenende in statoverride-Dateiunerwarteter bereits existierender Pfadname %sunbekanntes Argument »%s«unbekannte Komprimierungsstrategieunbekannte Komprimierungsstrategie »%s«!unbekannter Komprimierungstyp »%s«!unbekannte deb-Format-Version: %sUnbekanntes Flag »%s« für Conffile »%s«unbekannte force/refuse-Option »%.*s«unbekannte Option »%s«unbekannte Option -%cunbekannte Option --%sunbekannte Systemgruppe »%s« in der statoverride-Datei; die Systemgruppe wurde
+vor dem Override entfernt, was höchstwahrscheinlich ein Paketierungsfehler ist,
+um dies auszugleichen können Sie den Override manuell mit %s entfernenunbekannter Systembenutzer »%s« in der statoverride-Datei; der
+Systembenutzer wurde vor dem Override entfernt, was höchstwahrscheinlich ein
+Paketierungsfehler ist, um dies auszugleichen können Sie den Override
+manuell mit %s entfernenunbekannter Tar-Kopfteil-Typ »%c«unbekanntes Ausgabeformat »%s« für Überprüfungunbekannter Gewünscht-Status in Zeile %d: %.250sentpackt, aber nicht konfiguriertnicht behebbarer fataler Fehler, Abbruchnicht unterstützter GNU-Tar-Kopfteil-Typ »%c«nicht unterstützter PAX-Tar-Kopfteil-Typ »%c«nicht unterstützter Solaris-Tar-Kopfteil-Typ »%c«nicht unterstützte Komprimierungs-Voreinstellungnicht unterstützter Komprimierungstyp »%s« mit einheitlicher Komprimierungnicht unterstützte Optionen in Dateikopfnicht unterstützte Art der IntegritätsprüfungDas Updates-Verzeichnis enthält die Datei »%.250s«, deren Name zu lang ist (Länge=%d, Max=%d)Das Updates-Verzeichnis enthält Dateien mit verschieden langen Namen (sowohl %d als auch %d)Alternative %s wird aktualisiert, weil Linkgruppe %s geänderte Slave-Links hatBenutzer »%s« existiert nichtbenutzerdefinierter Feldname »%.*s« ist zu kurz%s wird verwendet, um %s (%s) im automatischen Modus bereitzustellen%s wird verwendet, um %s (%s) im manuellen Modus bereitzustellenWert für Feld »%s« enthält Zeile, die mit Nicht-Leerzeichen »%c« beginntWert für Feld »%s« enthält falsch formatierte Zeile »%.*s«Wert für Feld »%s« ist in diesem Kontext nicht erlaubtÜberprüfung von Paket %s fehlgeschlagen!Überprüfung von Paket %s fehlgeschlagen; wird aber wie gefordert trotzdem installiert<keine>Version %.250s von %.250s ist bereits installiert, wird übergangenVersion »%s« hat falsche SyntaxVersion »%s« hat falsche Syntax: %sVersionsnummer beginnt nicht mit einer ZifferVersionsnummer ist leerVersionszeichenkette enthält LeerzeichenVersionszeichenkette ist leerProvides mit VersionWarten auf »%s«-Unterprozess fehlgeschlagenWarten auf Unterprozess %s fehlgeschlagenWarnungBeim Lesen von %s: %sWährend Entfernens von %.250s ist Verzeichnis »%.250s« nicht leer, wird daher nicht gelöschtWährend des Entfernens von %.250s kann Verzeichnis »%.250s« nicht gelöscht werden: %s - Verzeichnis vielleicht ein Einhängepunkt?Version %2$.250s des Paketes %1$.250s wird nicht durch ältere Version %3$.250s ersetzt, Paket wird übergangenWort im Feld »%s«: %sJa, %s wird dekonfiguriert (beschädigt durch %s)Ja, %s wird zugunsten von %s entferntSieh haben keine Berechtigung, das dpkg-Datenbank-Verzeichnis %s zu sperrenSie müssen Pakete mit ihrem eigenen Namen angeben, nicht durch Angabe von Dateien, in denen sie geliefert werden
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/dz.gmo dpkg-1.20.7.1/po/dz.gmo
--- dpkg-1.20.7.1-orig/po/dz.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/dz.gmo	2021-06-09 18:25:14.498502732 -0500
@@ -0,0 +1,258 @@
+��T�
+�\�a�=�&!.Hw.�� �4�)5E-{.�1�$
+4//d$���6�10 1b !� � � )� 9!.>!'m!&�!3�!5�!&","9"N"["p"�"�"�"�"�"-�"H
+#QS#A�#e�#fM$7�$<�$B)%l%�%
�% �%�%5�%1&N&`&#y&!�&�&K�&5('-^'!�'�'5�'�',(.C(.r(�(H�(6
+)(A)>j)�)��)^*gu*�+�,0-3=-1q-�-�-*�-2�-�.-�//�/]0{0G�08�0,1.1(M1:v1 �1-�12�2��2��3�t4 5�?5 �5,�5$666>6J6V66c6!�6�6%�67% 7"F7&i7�7�7;�73�728AO8�8&�8"�8E�8,@9"m9-�95�9,�9G!:i:*�:"�:"�:�:;;';?;-^;)�;�;�;)�;<3<!R<!t<�<%�<%�<�<=!1=S= p=#�=+�=%�=$>,> H>i>:|>�>�>�>$
?2?M?c?{?�?�?!�?�?5@ B@%c@�@0�@*�@.A+4A)`A4�A4�A;�A<0B:mB7�B0�B;C?MC$�CA�C$�C!D;DYD:wD<�D�D'�D	#E"-E!PErEO�E8�E*F?F7WF5�F!�F�F�F5G"PG4sG
�G �G%�GG�G?EH#�H7�H2�HYI4nIF�I1�I;JXJ wJD�J�J&�J-KEK.MK|K�K)�K�K&�KLH4L0}L6�L4�LM%:M%`M�M+�M4�MF�M@CN+�N%�N1�N+ON4O*�O�O+�O,�O!P"<P$_P*�P�P*�P&�P3Q4QQ)�Q,�QD�Q*"R4MR&�R#�R#�R%�R'S.?SnS!�S4�S4�S[T,sT4�T#�T,�T/&U+VU-�U�U�U2�U&VB=V1�V*�V6�V&W4;W1pW�W�W"�W�W
X(!XJXSfXM�X(Y"1YTYlY`tY��YS�[�!]\�]}Z^&�^��^O�_v�_�O`Xa�^a�b��b�,cw�c�Dd�ez�eh1fk�f�g��g� hn�hiR-i��i� j�k��k��l�:m��m	�n'�n4�n$oK>o*�o(�oC�o;"p9^pq�pg
+q!rq��r�Xs)�s�%u��v�Cw�xO�xM�xD<yX�ya�y�<z��z1q{8�{��{ui|m�|M}�V~�(Y�b��x�Y��l������La�����t��;���� ކ���4ވD�eX�>���������g�.�4��S���=���ɘ�n�>%�d�t�����e��r�������~�?B�7��������l��r���n�������4Q���0��-а,���+��ɱxK��Ĳ|\��ٳPn�}��T=�H���۵����9��Ƿ[���ݸn`��Ϲ|��s��Ls�����U��ܼl���������X���3/�Oc�_�������oq�7��|�[��s��mf�s��pH����]E�v��4�ZO�p��Z�cv����`��{��s^�q��2D�w�����!�����G�����a�~��~n��������-�����v��`�}��|{�����������m��������-�����������}��Z��
+��������j��
�{��W	��a����W��~G�9��`��a�g���\��+���N���������v�?��V:����`P����9������n�-��0��0������������
+/��:�������lB����X��������=$��b�]��=Y����o����oK-��������g���4I�~�E�����	`
+�u
+�
���K�
��
�V<�[7������@j���	x��!�����[pm�m�r_X��+F�X�s�OH�_��j�~��� �� o�!B�!�<"�
#�#��$�`%��%��&�E'�(D�(c)�x)7*5F*x|*s�*+i+ �,��-�Y.l/{/e�/JA1��+f0�:+�}�U���L�5
+I%��maCZM�t�D��kj�g*x�Q�GX����"./i�8
+(K��#�����{����8~�����
��e�?��SHObTz-;$H��'N9�����	��0��JP3S�� ��s<��?p����LC"R/N�2�c����A�3Y7�Oo,�#�`QF<�^[';�M@��\)K��v��I4���%�=�6���1�P�ly���6]�.���BE w,_�V!|���*!5u�:��&�F	�h�G��n�R�B4
7��-�$qD���d=r�@�&��)�>W(�ET9�2>�
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+ %d in %s:  %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+%s breaks %s%s conflicts with %s%s depends on %s%s enhances %s%s pre-depends on %s%s recommends %s%s suggests %s'%s' clashes with '%s''%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix; however:
+<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+Authenticating %s ...
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NamePackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want Processing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Version[default=N][default=Y][no default]archive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerbroken due to postinst failurecan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)couldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdivert-to may not contain newlinesdiverted by %s to: %s
+done
+duplicate path %sduplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror opening conffiles fileerror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to stderr, discovered before conffile promptfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to write details of '%.50s' to '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefork failedillegal package name at line %d: %.250sinstalledinvalid integer for --%s: '%.250s'link %s is both primary and slavelocally diverted to: %s
+maintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentspackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage diverts others to: %s
+package may not contain newlinespackage name has characters that aren't lowercase alphanums or '-+.'part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepassed
+pre-dependency problem - not installing %.250spriority must be an integerread error in %.250sread error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package filerename involves overwriting '%s' with
+  different file '%s', not allowedrequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave link same as main link %ssource file '%.250s' not a plain filestatoverride file contains empty linestripping trailing /subprocess %s returned error exit status %dtarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upunable to (re)open input part file '%.250s'unable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close updated status of '%.250s'unable to create '%.255s'unable to delete control info file '%.250s'unable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to read depot directory '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to seek to start of %.250s after paddingunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to stat %s '%.250s'unable to stat '%.250s'unable to stat current installed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to truncate for updated status of '%.250s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywarningyou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:48+0200
+Last-Translator: Tshewang Norbu <bumthap2006@hotmail.com>
+Language-Team: Dzongkha <pgeyleg@dit.gov.bt>
+Language: dz
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n!=1)
+X-Poedit-Language: Dzongkha
+X-Poedit-Country: Bhutan
+X-Poedit-SourceCharset: utf-8
+X-Poedit-Bookmarks: -1,-1,317,-1,-1,-1,-1,-1,-1,-1
+
+རིམ་སྒྲིག་ཡིག་སྣོད་ `%s' རིམ་ལུགས་གུ་ལུ་མེད།
+ཁྱོད་ཀྱིས་ཞུ་བ་འབད་དོ་བཟུམ་སྦེ་རིམ་སྒྲིག་ཡིག་སྣོད་གསརཔ་གཞི་བཙུགས་འབད་དོ།
+     ཐུམ་སྒྲིལ་ནང་གི་ཐོན་རིམ་འདི་མཇུག་ལུ་གཞི་བཙུགས་འབད་ཡོད་མི་དང་གཅིག་པ་ཨིན།
+     ཉག་རྐྱང་ཡིག་སྣོད་          %.255s མེན་པས
+  %.250s (ཐོན་རིམ་ %.250s) འདི་གཞི་བཙུགས་འབད་དགོཔ་ཨིན།
+  %.250s འདི་ %s ཨིན།
+  %.250s འདི་བཤུབ་ཡོད། དེ་འབདཝ་ད་འདི་ཐོན་རིམ་ %.250s ཨིན།
+  %.250s འདི་གཞུ་བཙུགས་མ་འབད་བས།
+  %.250s འདི་རིམ་སྒྲིག་མ་འབད་བར་བཞག་དགོཔ་ཨིན།
+  %.250s འདི་གཞི་བཙུགས་འབད་དགོཔ་ཨིན་། དེ་འབདཝ་ད་འདི་ཐོན་རིམ་ %.250s ཨིན།
+  %.250s འདི་རྩ་བསྐྲད་གཏང་དགོཔ་ཨིན།
+  %.250s འདི་བཤུབ་ཡོད། དེ་འབདཝ་ད་འདི་ནམ་ཡང་རིམ་སྒྲིག་མ་འབད་བས།
+  %.250s འདི་བཤུབ་ཡོད། དེ་འབདཝ་ད་འདི་ཐོན་རིམ་ %.250s ཨིན།
+  %.250s གིས་མཐའ་མཇུག་རིམ་སྒྲིག་འབད་མི་ཐོན་རིམ་འདི་ %.250s ཨིན།
+  %.250s གིས་   %.250s བྱིནམ་ཨིན་ དེ་ལས་འདི་གཞི་བཙུགས་འབད་དགོ་ཨིན།
+  %.250s གིས་ %.250s བྱིནམ་ཨིན་ དེ་འབདཝ་ད་འདི་ %s ཨིན།
+  %.250s གིས་ %.250s བྱིནམ་ཨིན་ དེ་འབདཝ་ད་འདི་རིམ་སྒྲིག་མ་འབད་བར་བཞག་དགོཔ་ཨིན།
+  %.250s གིས་ %.250s བྱིནམ་ཨིན་ དེ་འབདཝ་ད་འདི་རྩ་བསྐྲད་གཏང་དགོཔ་ཨིན།
+ཐུམ་སྒྲིལ་ %s འདི་ད་ཚུན་རིམ་སྒྲིག་མ་འབད་བས།
+ཐུམ་སྒྲིལ་ %s འདི་གཞི་བཙུགས་མ་འབད་བས།
+ཐུམ་སྒྲིལ་ %s འདི་རྩ་བསྐྲད་གཏང་ནི་ཨིན།
+%s བྱིན་མི་ཐུམ་སྒྲིལ་ %s འདི་ད་ཚུན་རིམ་སྒྲིག་མ་འབད་བས།
+%s བྱིན་མི་ཐུམ་སྒྲིལ་ %s འདི་གཞི་བཙུགས་མ་འབད་བས།
+  %s བྱིན་མི་ ཐུམ་སྒྲིལ་ %s འདི་རྩ་བསྐྲད་གཏང་ནི་ཨིན།
+  རིམ་ལུགས་གུའི་ %s གི་ཐོན་རིམ་འདི་ %s ཨིན།
+ %d  %s ནང་:  %s (ཉག་རྐྱང་ཡིག་སྣོད་ཅིག་མེན་)
+ ==> རིམ་སྒྲིག་ཡིག་སྣོད་རྙིངམ་འདི་སྔོན་སྒྲིག་སྦེ་བཞག་དོ།
+ ==> ཐུམ་སྒྲིལ་བགོ་འགྲེམ་པ་གིས་དུས་མཐུན་བཟོ་ཡོད་པའི་ཐོན་རིམ་ཅིག་སྐྱེལ་འདྲེན་འབད་ནུག
+ ==> ཁྱོད་ཀྱི་ཞུ་བ་འབད་དོ་བཟུམ་སྦེ་ ད་ལྟོའི་ཡིག་སྣོད་རྙིངམ་ལག་ལེན་འཐབ་དོ།
+ ==> རིམ་སྒྲིག་ཡིག་སྣོད་འདི་སྔོན་སྒྲིག་སྦེ་ལག་ལེན་འཐབ་དོ།
+ ==> ཁྱོད་ཀྱི་ཞུ་བ་འབད་དོ་བཟུམ་སྦེ་ཡིག་སྣོད་གསརཔ་ལག་ལེན་འཐབ་དོ།
+སྔོན་སྒྲིག་གི་བྱ་བ་འདི་ཐོན་རིམ་གསརཔ་གཞི་བཙུགས་འབད་ནི་འདི་ཨིན།
+སྔོན་སྒྲིག་གི་བྱ་བ་འདི་ཁྱོད་ཀྱི་ད་ལྟོའི་ཐོན་རིམ་བཞག་ནི་འདི་ཨིན།
+དང་ལུ་རྟེནམ་ཨིན།%s (ལས་སྦྱོར་ཡན་ལག): %s
+%s བར་མཚམས་ཚུ %s%s དང་གཅིག་ཁར་མི་མཐུནམ་ཨིན %s%s ལུ་རྟེནམ་ཨིན %s %s གོང་སྤེལ་ཚུ %s%s ལུ་གུ་སྔོན་-རྟེནམ་ཨིན %s%sའོས་སྦྱོར་འབདཝ་ཨིན %s%s བསམ་འཆར་བཀོདཔ་ཨིན %s`%s' འདི་ `%s' དང་ཅིག་ཁར་རྡབ་འཁྲུག་བྱུངམ་ཨིན།`%s' ས་སྒོ་ ནུས་མེད་ཐུམ་སྒྲིལ་མིང་ `%.255s': %s`%s' ས་སྒོ་ ཐུམ་སྒྲིལ་གྱི་མིང་རེ་བ་བསྐྱེད་ཡོད་ས་ལུ་ ཐུམ་སྒྲིལ་མིང་  ཡང་ན་ཕྱགས་ཉིག་ བརླག་སྟོར་ཞུགས་ཡོདཔ།`%s' ས་སྒོ་ གཞི་བསྟུན་ `%.255s' ལུ་:
+`%c' ཕན་མེད་ཨིན། ཚབ་ལུ་ `%c=' ཡང་ན་ `%c%c' ལག་ལེན་འཐབ།`%s' ས་སྒོ་ གཞི་བསྟུན་  `%.255s' ལུ་:
+བྱང་ཉེས་ཐོན་རིམ་མཐུན་འབྲེལ་ %c%c`%s' ས་སྒོ་ གཞི་བསྟུན་ `%.255s' ལུ་:
+བསམ་པའི་མཐུན་སྒྲིག་ཏག་ཏག་ཐོན་རིམ་གུ་ལུ། ཚབ་ལུ་ `=' ལག་ལེན་འཐབ་ནི་བསམ་འཆར་བཀོད།`%s' ས་སྒོ་ གཞི་བསྟུན་ `%.255s' ལུ་:
+ཐོན་རིམ་གནས་གོང་འདི་ ཀ་ཁ་ཨང་ཡིག༌-མེད་མི་དང་ཅིག་ཁར་འགོ་བཙུགསཔ་ཨིན། བར་སྟོང་ཅིག་ཁ་སྐོང་རྐྱབས་ནིའི་བསམ་འཆར་བཀོད།`%s' ས་སྒོ་ གཞི་བསྟུན་ `%.255s' ལུ་: ཐོན་རིམ་རྩ་གྲོལ་མ་གཏངམ།`%s' ས་སྒོ་ ཐུམ་སྒྲིལ་ `%.255s' ལུ་གཞི་བསྟུན་གྱི་ཤུལ་ལས་ཚིག་སྦྱོར་གྱྀ་འཛོལ་བ།(%s གི་ཡལ་མི་ ཆ་ཚང་སྦེ་ཚབ་བཙུགས་ཡོད་མི་ ག་ཅི་ཡང་མེད།)
+(གནད་སྡུད་གཞི་རྟེན་ལྷག་དོ་...(འགྲེལ་བཤད་འཐོབ་ཚུགསཔ་མེད་), ནང་རྙིང་བཀོག་བཞག་ཡོདཔ།-%c གདམ་ཁ་གིས་གནས་གོང་ཅིག་མི་འབག-%c གདམ་ཁ་གིས་གནས་གོང་ཅིག་འབགཔ་ཨིན།--%s --བསྣར་ནི་འདི་གིས་གདམ་ཁ་-མིན་པའི་སྒྲུབ་རྟགས་ག་ནི་ཡང་མི་འབག--%s --recursive ལུ་ཉུང་མཐའ་འགྲུལ་ལམ་སྒྲུབ་རྟགས་གཅིག་དགོ--%s ལུ་ <name> དགོཔ་ཨིན།--%s ལུ་ <name> <path> དགོཔ་ཨིན།--%s ལུ་ .deb ཡིག་སྣོད་མིང་གི་སྒྲུབ་རྟགས་ཅིག་དགོཔ་ཨིན།--%s ་ལུ་ <སྣོད་ཐོ་> སྒྲུབ་རྟགས་ཅིག་དགོཔ་འདུག--%s་ལུ་སྒྲུབ་རྟགས་རྐྱང་པ་ཅིག་དགོཔ་འདུག--%s ལུ་དམིགས་གཏད་ཀྱི་སྣོད་ཐོ་ཅིག་དགོ
+ཁྱོད་ཀྱིས་ ཌི་པི་ཀེ་ཇི་ --གཞི་བཙུགས་ ལག་ལེན་འཐབ་དགོཔ་འོང་?--%s ལུ་ཉུང་མཐའ་ཐུམ་སྒྲིལ་ཡིག་མཛོད་ཡིག་སྣོད་ཀྱི་སྒྲུབ་རྟགས་གཅིག་དགོཔ་ཨིན།--%s ལུ་ཉུང་མཐའ་ཐུམ་སྒྲིལ་མིང་གི་སྒྲུབ་རྟགས་གཅིག་དགོ--%s གདམ་ཁ་གིས་གནས་གོང་ཅིག་མི་འབག--%s གདམ་ཁ་གིས་གནས་གོང་ཅིག་འབགཔ་ཨིན།--%s གིས་མང་མཐའ་སྒྲུབ་རྟགས་གཉིས་འབགཔ་ཨིན།(.deb དང་སྣོད་ཐོ་)--%s གི་སྒྲུབ་རྟགས་གཅིག་ཡང་མི་འབག--%s གིས་སྒྲུབ་རྟགས་གཅིག་རྐྱངམ་ཅིག་འབགཔ་ཨིན།(.deb ཡིག་སྣོད་མིང་)--རང་བཞིན་ལུ་ཡན་ལག་ཡིག་སྣོད་ཀྱི་སྒྲུབ་རྟགས་གཅིག་ཏག་ཏག་དགོ--རང་བཞིན་ལུ་--ཨའུཊི་པུཊི་གདམ་འདི་གི་ལག་ལེན་འདི་དགོཔ་ཨིན།--compare-versions བྱང་ཉེས་མཐུན་འབྲེལ།--compare-versions གིས་སྒྲུབ་རྟགས་གསུམ་འབགཔ་ཨིན་: <ཐོན་རིམ་> <མཐུན་འབྲེལ་> <ཐོན་རིམ་>--འཚོལ་ཞིབ་ལུ་ ཉུང་མཐའ་ཡིག་སྣོད་མིང་གི་དཔེ་གཞིའི་སྒྲུབ་རྟགས་གཅིག་དགོ--བཤག་ནི་ལུ་ འབྱུང་ཁུངས་ཡིག་སྣོད་མིང་གི་སྒྲུབ་རྟགས་ཅིག་དགོཔ་ཨིན།--བཤག་ནི་འདི་གིས་ འབྱུང་ཁུངས་ཡིག་སྣོད་མིང་དང་འགྲོ་ཡུལ་སྔོན་ཚིག་མང་ཤོས་འབགཔ་ཨིན།གང་ལྟར་ཡང་:
+<deb> འདི་ཌི་བིཡཱན་རྩ་སྒྲིག་ཡིག་མཛོད་ཀྱི་ཡིག་སྣོད་མིང་ཨིན།
+<cfile> འདི་བདག་སྐྱོང་ཡཡིག་སྣོད་ཆ་ཤས་ཀྱི་ཡིག་སྣོད་མིང་ཨིན།
+<cfield> འདི་`control' ཡིག་སྣོད་གཙོ་བོ་དེ་ནང་གི་ས་སྒོའི་མིང་ཨིན།
+
+%s བདེན་བཤད་འབད་དོ...
+བརྡ་བཀོད་ཚུ་:
+  -s|--བཤག་ <file> [<prefix>]     ཡིག་མཛོད་ཅིག་བཤག
+  -j|--མཐུད་ <part> <part> ...      ཡན་ལག་ཚུ་གཅིག་ཁར་མཐུད།
+  -I|--བརྡ་དོན་ <part> ...             ཡག་ལག་གི་སྐོར་ལས་བརྡ་དོན་བཀྲམ་སྟོན་འབད།
+  -a|--རང་བཞིན་ -o <complete> <part>   རང་བཞིན་-སྤུང་བའི་ཡན་ལག་ཚུ།
+  -l|--ཐོ་ཡིག་ཀིའུ་                       ཐོ་ཡིག་མ་མཐུན་མི་རྩེད་ཆས།
+  -d|--བཏོན་བཀོག་ [<filename> ...]    མ་མཐུན་པའི་རྩེད་ཆས་བཏོན་བཀོག
+
+ --compare-versions གྱི་དོན་ལུ་ག་བསྡུར་རྐྱབས་ནིའི་བཀོལ་སྤྱོད་པ་ཚུ་:
+  lt le eq ne ge gt       (ཐོན་རིམ་ག་ལས་ཡང་ཐོན་རིམ་སྟོངམ་འདི་ཧེ་མའི་བཟུམ་སྦེ་བརྩི་འཇོག་འབད།)
+  lt-nl le-nl ge-nl gt-nl (ཐོན་རིམ་ག་ལས་ཡང་ཐོན་རིལ་སྟོངམ་འདི་ཤུལ་མའི་བཟུམ་སྦེ་བརྩི་འཇོག་འབད།)
+  < << <= = >= >> >       (ཚད་འཛིན་ཡིག་སྣོད་ཚིག་སྦྱོར་དང་གཅིག་ཁར་ག་བསྡུར་རྐྱབས་བཏུབ་མིའི་དོན་ལུ་རྐྱངམ་ཅིག)
+
+ཌེ་བི་ཡཱན་ %s ཐོན་རིམ་ %s
+ཌི་བི་ཡཱན་ `%s' ཐུམ་སྒྲིལ་ཡིག་མཛོད་ཀྱིས་ཐོན་རིམ་ %s རྒྱབ་མཐའ་འབད་ཡོད།
+ཌི་བི་ཡཱན་ `%s' ཐུམ་སྒྲིལ་འཛིན་སྐྱོང་པའི་ལས་རིམ་གྱི་ཐོན་རིམ་ %s
+ཌི་བི་ཡཱན་ `%s' ཐུམ་སྒྲིལ་བཤག་/མཐུད་ནིའི་ལག་ཆས། ཐོན་རིམ་ %s.
+%s བཏོན་གཏང་ཡོདཔ།
+འགྲེལ་བཤད།ལས་སྦྱོར་འབད་བའི་སྐབས་ལཛོལ་བ་ཚུ་གདོང་ཐུག་བྱུང་ཡོདཔ་:
+ཡིག་སྣོད་ `%.250s' འདི་སྣ་མང་ཡན་ལག་ཡིག་མཛོད་ཀྱི་ཡན་ལག་མེན།
+རྩ་སྒྲིག་ཚིག་སྦྱོར་:
+  རྩ་སྒྲིག་འདི་ ཐུམ་སྒྲིལ་རེའི་དོན་ལུ་ཨའུཊི་པུཊི་ ཨིན་མི་ཡིག་རྒྱུན་ཅིག་ཨིན། རྩ་སྒྲིག་འདི་གིས་
+  ཚད་ལྡན་ཐར་འབྱུང་རིམ་ཚུ་ གྲངས་སུ་བཙུགས་འོང་ \n (གྲལ་ཐིག་གསརཔ་), \r (སྐྱེལ་འདྲེན་
+  སླར་ལོག་) ཡང་ན་ \\ (ཉག་རྐྱང་གཡོ་ཤད་ལོག་པ་)། ཐུམ་སྒྲིལ་བརྡ་དོན་འདི་
+  ${var[;width]}ཚིག་སྦྱོར་ལག་ལེན་འཐབ་ ཐུམ་སྒྲིལ་གྱི་ས་སྒོ་ཚུ་ལུ་ འགྱུར་ཅན་གཞི་བསྟུན་ཚུ་བཙུགས་ཞིནམ་ལས་གྲངས་སུ་བཙུགས་ཚུགས།
+  རྒྱ་ཚད་འདི་མེད་ཆ་མེན་ཚུན་ས་སྒོ་འདི་ གཡས་-ཕྲང་འབད་འོང་
+  གཡོན་ཕྲང་སྒྲིག་ལག་ལེན་འཐབ་མི་གནད་དོན་ནང་ལུ།
+རིམ་སྒྲིག་ཡིག་སྣོད་ %s གི་ཐོན་རིམ་གསརཔ་གཞི་བཙུགས་འབད་དོ་...
+དོས་ཁང་སྣོད་ཐོ་ནང་གི་མཐའ་འཁོར་ལུ་བཞག་མི་མཁོ་མེད་ཡིག་སྣོད་ཚུ་:
+ཐུམ་སྒྲིལ་ %s གི་འདྲ་བཤུས་གཅིག་ལས་ལྷག་སྟེ་ བཤུབ་ཡོད་
+འ་ནི་གཡོག་བཀོལ་ནང་ལུ་! ཚར་གཅིག་རྐྱངམ་ཅིག་རིམ་སྒྲིག་འབད་དོ།
+མིང་།ཐུམ་སྒྲིལ་ %s འདི་འཆང་འདི་ཡོདཔ་ཨིན་  མ་སྤྲོག་པར་བཞག་དོ། ཟུར་བཞག་འབད་ནིའི་དོན་ལུ་ --force-hold ལག་ལེན་འཐབ།
+ཐུམ་སྒྲིལ་ %s གིས་ཚར་གཅིག་ལས་ལྷག་སྟེ་ཐོ་བཀོད་འབད་ནུག   ལས་སྦྱོར་ཚར་གཅིག་རྐྱངམ་ཅིག་འབདཝ་ཨིན།
+ཐུམ་སྒྲིལ་ `%s' གི་ནང་ན་ཡིག་སྣོད་ག་ནི་ཡང་མེད་(!)
+ཐུམ་སྒྲིལ་ཚུ་ད་ཚུན་ལོག་མ་འཛོམས་པས:
+ཡན་ལག་ %d ཐུམ་སྒྲིལ་ %s ལས་བཙུགས་ཡོདཔ་(ད་ལྟོ་ཡང་དགོ་ནི་ལས་སྦྱོར་འབད་ནི་འདི་བར་ཐེམ་ལུས་ཡོད་ ག་ཅི་སྦེ་ཟེར་བ་ཅིན་ དེ་ནང་ལུ་འཛོལ་བ་ལེ་ཤ་འདུག
+%s གི་སྐོར་ལས་བརྡ་དོན་འདི་ %s ལས་དྲན་ཐོ་བཀོད་ཡོད།
+%s ལག་ལེན་འཐབ་ཐོག་ འཐོབ་ཚུགས་པའི་ཐུམ་སྒྲིལ་གྱི་བརྡ་དོན་ ཚབ་བཙུགས་དོ།
+%s (%s) གཞི་སྒྲིག་འབད་དོ་...
+འོག་གི་ཐུམ་སྒྲིལ་ཚུ་གཞི་བཙུགས་ཀྱི་སྐབས་འཚུབ་ཅན་དཀའ་ལུ་རྟེེན་ཏེ་ཁམ་ལོག་སི་སི་ཨིན་པས།
+དེ་ཚུ་གི་དོན་ལུ་ལོག་འགོ་བཙུགས་དགོ་(དེ་ལས་ཐུམ་སྒྲིལ་ཚུ་
+ཁོང་ལུ་བརྟེན་མི་)ལེ་ཤོམ་སྦེ་ལས་འགན་གྲུབ་ནིའི་དོན་ལུ་:
+འོག་གི་ཐུམ་སྒྲིལ་ཚུ་ཕྱེད་ཀ་རྐྱངམ་ཅིག་རིམ་སྒྲིག་འབད་ཡོད་ དེ་ཡང་
+འདི་ཚུ་འགོ་དང་པ་རིམ་སྒྲིག་འབད་བའི་དཀའ་ངལ་ལུ་བརྟེན་ཨིནམ་འོང་། རིམ་སྒྲིག་འདི་ 
+dpkg --configure <ཐུམ་སྒྲིལ་> ཡང་ན་ སེལ་འཐུ་མི་འབད་ནི་ནང་གི་རིམ་སྒྲིག་དཀར་ཆག་གདམ་ཁ་འདི་ལག་ལེན་འཐབ་ཐོག་ལོག་འབད་རྩོལ་བསྐྱེད་དགོ:
+འོག་གི་ཐུམ་སྒྲིལ་ཚུ་ཕྱེད་ཀ་རྐྱངམ་ཅིག་གཞི་བཙུགས་འབད་ཡོདཔ་ཨིན་ འདི་ཡང་གཞི་བཙུགས་འབད་བའི་སྐབས་ཀྱི་དཀའ་ངལ་ཚུ་ལུ་བརྟེན།
+གཞི་བཙུགས་འདི་ལོག་འབད་རྩོལ་བསྐྱེད་ཐོག་ལས་གཞི་བཙུགས་འབད་ཚུགས།
+ཐུམ་སྒྲིལ་ཚུ་སེལ་འཐུ་མི་འབད་ནི་ཡང་ན་dpkg --remove ལག་ལེན་འཐབ་ཐོག་རྩ་བསྐྲད་གཏང་ཚུགས་:
+འོག་གི་ཐུམ་སྒྲིལ་ཚུ་བཤུབ་སྟེ་ཡོད་ དེ་འབདཝ་ད་ད་ཚུན་རིམ་སྒྲིག་མ་འབད་བས།
+འདི་ཚུ་ ཁོང་ཚུའི་དོན་ལུ་ལཱ་འབད་བཅུག་ནིའི་དོན་ལུ་ 
+dpkg --configure ཡང་ན་ སེལ་འཐུ་མི་འབད་ནི་ནང་གི་རིམ་སྒྲིག་དཀར་ཆ་གདམ་ཁ་ ལག་ལེན་ཐའབ་ཐོག་རིམ་སྒྲིག་འབད་དགོ:
+ཁྱོད་འབད་ཚར་བའི་སྐབས་ `exit' ཡིག་དཔར་རྐྱབས།
+དབྱེ་བ་ ཌི་པི་ཀེ་ཇི་ - ཌེབ་--གྲོགས་རམ་ འདི་ *.deb ཡིག་སྣོད་ཚུ་ སྒྱུར་བཅོས་གཏང་ནིའི་སྐོར་ལས་གྲོགས་རམ་གྱི་དོན་ལུ།
+དབྱེ་བ་ཌི་པི་ཀེ་ཇི་--གྲོགས་རམ་འདི་ ཐུམ་སྒྲིལ་ཚུ་གཞི་བཙུགས་འབད་ནི་དང་གཞི་བཙུགས་མི་འབད་ནིའི་སྐོར་ལས་གྲོགས་རམ་གྱི་དོན་ལུ།དབྱེ་བ་ ཌི་པི་ཀེ་ཇི་-བཤག་ --གྲོགས་རམ་གྱི་དོན་ལུ་གྲོགས་རམ།%s ལག་ལེན་འཐབ་ཐོག་ འཐོབ་ཚུགས་པའི་ཐུམ་སྒྲིལ་ཚུ་དུས་མཐུན་བཟོ་དོ།
+ལག་ལེན་: %s [<option> ...] <command>
+
+ཐོན་རིམ།[སྔོན་སྒྲིག་=ཨེན་][སྔོན་སྒྲིག་=ཝའི][སྔོན་སྒྲིག་མེད]ཡིག་མཛོད་ཀྱི་ནང་ན་དངོས་པོ་ `%.255s' མ་ཤེས་པའི་དབྱེ་བ་ 0x%x འདུགཡིག་མཛོད་ལུ་མགོ་ཡིག་ནང་གྲལ་ཐིག་གསརཔ་ཚུ་མེད།པོསིཊི་ཨིནསིཊི་འཐུས་ཤོར་ལུ་རྟེན་ཆད་ཡོདཔ།ཐུམ་སྒྲིལ་བརྡ་དོན་ཡིག་སྣོད་ `%.255s' ཨེམ་མེཔ་འབད་མི་ཚུགས།པོསིཊི་རིམ་ ཡིག་ཚུགས་རྩ་བསྐྲད་གཏང་མི་ཚུགས།ཐུམ་སྒྲིལ་བརྡ་དོན་ཡིག་སྣོད་ `%.255s' སིཊེཊི་འབད་མི་ཚུགས།`%.255s' ཁ་ཕྱེ་མི་ཚུགས་(`%.255s' ནང་ལུ་)ཡིག་མཛོད་ཡན་ལག་ཡིག་སྣོད་ `%.250s'  ཁ་ཕྱེ་མི་ཚུགས།བརྡ་དོན་སྣོད་ཐོ་ལྷག་མི་ཚུགས།`%.250s' རྩ་བསྐྲད་གཏང་མི་ཚུགས།རྒྱབ་ཐག་རིམ་སྒྲིག་ཡིག་སྣོད་`%.250s' (`%.250s' གི་) རྙིངམ་རྩ་བསྐྲད་གཏང་མ་ཚུགས།རིམ་སྒྲིག་ཡིག་སྣོད་`%.250s'(=་`%.250s') རྙིངམ་ རྩ་བསྐྲད་གཏང་མ་ཚུགས།ཡིག་སྣོད་ཀྱི་ཐོ་ཡིག་རྙིངམ་རྩ་བསྐྲད་གཏང་མི་ཚུགས།%.250s གི་དོན་ལུ་སྔོན་-རྟེན་འབྲེལ་ངལ་རངས་མི་ཚུགས་(%.250s གི་དོན་ལས་དགོཔ་)སྣོད་ཐོ་ `%.255s' ཞིབ་ལྟ་འབད་མི་ཚུགས།དུས་མཐོན་ཀྱི་སྣོད་ཐོ་ `%.255s' ཞིབ་ལྟ་འབད་མི་ཚུགས།cannot stat `%.255s' སི་ཊེཊི་འབད་མི་ཚུགས་(`%.255s' ནང་ལུ་)ཡིག་འབྲུ་ `%c' མི་ཆོག་(ཡིག་གུ་ ཨང་ཡིག་ དང་ཡིག་འབྲུ་ `%s' ཚུ་རྐྱངམ་ཅིག)ཀཱོན་ཕ་ཡིལ་`%.250s' འདི་ ཐུམ་སྒྲིལ་ནང་མི་འབྱུང་།ཀཱོན་ཕཡིལ་ `%.250s' འདི་སི་ཊེཊི་འབད་བཏུབ་མེན།མི་མཐུན་པའི་བྱ་བ་-%c (--%s) and -%c (--%s)`%.250s' ཡང་ན་ `%.250s' འབྲེལ་བ་ཡོད་མི་མི་མཐུན་པའི་ཁ་སྒྱུར་ཚུ།མི་མུན་པའི་ཐུམ་སྒྲིལ་ཚུ་ -  %.250s གཞི་བཙུགས་མི་འབད།ཚད་འཛིན་སྣོད་ཐོ་ལུ་བྱང་ཉེས་གནང་བ་ %03lo (>=0755 དང་ <=0775 ཨིན་དགོ་) འདུགརྒྱུན་རིམ་གྱི་དོན་ལུ་ `%i' ཁ་ཕྱེ་མ་ཚུགས།རྟེན་འབྲེལ་གྱི་དཀའ་ངལ་ཚུ་ - རིམ་སྒྲིག་མ་འབད་བར་བཞག་དོ།རྟེན་འབམྲེལ་གྱྱི་དཀའ་ངལ་ཚུ་ - རྩ་བསྐྲད་མི་གཏང་།ལུ་-ཁ་ཕྱོགས་སྒྱུར་བ་འདི་ནང་ལུ་གྲལ་ཐིག་གསརཔ་ཚུ་མེདཔ་འོང་།%s གིས་ : %s ལུ་ཁ་ཕྱོགས་སྒྱུར་ཡོདཔ་
+འབད་ཚར་
+འགྲུལ་ལམ་རྫུན་མ་ %sབྲན་གཡོག་འབྲེལ་ལམ་ %s རྫུན་མ།`%s' ས་སྒོའི་དོན་ལུ་གནས་གོང་རྫུན་མ།ལག་ལེན་པ་-ངེས་འཛིན་འབད་ཡོད་པའི་ས་སྒོ་ `%.*s' གི་དོན་ལུ་གནས་གོང་རྫུན་མ།ཨེཕ་གེཊིསི་ལྷག་ནིའི་ཀཱོན་ཕ་ཡིལསི་ལས་ཡིག་རྒྱུན་སྟོངམ།ཐོན་རིམ་ནང་གི་ཨི་པོཀ་འདི་ཨང་གྲངས་མེན།%.250s ཁ་བསྡམ་ད་འཛོལ་བ།རིམ་སྒྲིག་ཡིག་སྣོད་ `%.255s' ཁ་བསྡམ་ནིའི་འཛོལ་བ།`%.255s' ཁ་བསྡམ་ནི་/འབྲི་ནིའི་འཛོལ་བ།ཐབས་འཕྲུལ་ `%.255s' གསར་བསྐྲུན་འབདཝ་ད་འཛོལ་བ།སྣོད་ཐོ་ `%.255s' གསར་བསྐྲུན་འབདཝ་ད་འཛོལ་བ།ཧརཌི་ལིངཀ་ `%.255s' གསར་བསྐྲུན་འབདཝ་ད་འཛོལ་བ།རྒྱུད་དུང་ `%.255s' གསར་བསྐུན་འབདཝ་ད་འཛོལ་བ།བརྡ་མཚོན་འབྲེལ་ལམ་ `%.255s' གསར་བསྐྲུན་འབདཝ་ད་འཛོལ་བ།`%.250s' མེདཔ་ངེས་བདེན་བཟོཝ་ད་འཛོལ་བ།ཀཱོནཕ་ཕ་ཡིལསི་ ཡིག་སྣོད་ཁ་ཕྱེཝ་ད་འཛོལ་བ།%.250s ལྷག་པའི་འཛོལ་བ།ཡིག་སྣོད་ %.255s ལས་ %s ལྷགཔ་ད་འཛོལ་བ།ཀཱོནཕ་ཕ་ཡིལསི་ ཡིག་སྣོད་ལྷགཔ་ད་འཛོལ་བ།dpkg-deb རྒྱུད་དུང་ལས་ལྷག་ནི་འཛོལ་བ།`%.255s' གི་བདག་པོ་གཞི་སྒྲིག་གི་འཛོལ་བ།བརྡ་མཚོན་འབྲེལ་ལམ་ `%.255s' གི་བདག་པོ་གཞི་སྒྲིག་འབདཝ་ད་འཛོལ་བ།`%.255s' གི་གནང་བ་གཞི་སྒྲིག་གི་འཛོལ་བ།`%.255s' གི་དུས་བཀོད་གཞི་སྒྲིག་འབད་ནིའི་འཛོལ་བ།%.250s ཁ་ཕྱེ་ནིའ་འབད་རྩོལ་བསྐྱེདཔ་ད་འཛོལ་བ།%s: %s བརྡ་རྟགས་མ་བཟུང་པར་བཞག་ནིའི་འཛོལ་བ།
+`%s' འབྲིཝ་ད་འཛོལ་བ།ཨེསི་ཊི་ཌི་ཨི་ཨར་ཨར་ལུ་འབྲིཝ་ད་འཛོལ་བ། རིམ་སྒྲིག་ཡིག་སྣོད་ནུས་སྤེལ་གྱི་ཧེ་མ་གསར་རྙེད་འབད་ཡོདཔ།`%.255s' ལུ་སི་ཨེཆ་ཌི་ཨའི་ཨར་འབད་ནི་འཐུས་ཤོར་བྱུང་ཡོད།སྣོད་ཐོ་ལུ་སི་ཨེཆ་ཌི་ཨའི་ཨར་འབད་ནི་འཐུས་ཤོར་བྱུང་ཡོདཔ།`%.250s' ལུ་སི་ཨེཆ་རུཊི་ འབད་ནི་འཐུས་ཤོར་བྱུང་ཡོད།ལྷག་པའི་ཤུལ་མ་ཁ་བསྡམ་ནི་འཐུས་ཤོར་བྱུང་ཡོདཔ: `%.255s'སྣོད་ཐོ་གསར་བསྐྲུན་འབད་ནི་ལུ་འཐུས་ཤོར་བྱུང་ཡོདཔ།རྒྱུད་དུང་གསར་བསྐྲུན་འབད་ནི་འཐུས་ཤོར་བྱུང་ཡོདཔ།fd %d གི་དོན་ལུ་ཌུཔ་འབད་ནི་འཐུས་ཤོར་བྱུང་ཡོདཔ།std%s གི་དོན་ལུ་ཌུཔ་འབད་ནི་འཐུས་ཤོར་བྱུང་ཡོདཔ།ཨེཕ་སི་ཊེཊི་ཡིག་མཛོད་འབད་ནི་ལུ་ཐུས་ཤོར་བྱུང་ཡོདཔ།ཁ་སྒྱུར་ཡིག་སྣོད་ཨེཕ་སི་ཊེཊི་འབད་ནི་ལུ་འཐུས་ཤོར་བྱུང་ཡོད།སི་ཊེཊི་ཟུར་བཞག་ཡིག་སྣོད་ཨེཕ་སི་ཊེཊི་འབད་ནི་ལུ་འཐུས་ཤོར་བྱུང་ཡོད།ཁ་སྒྱུར་ཡིག་སྣོད་ཁ་ཕྱེ་ནི་འཐུས་ཤོར་བྱུང་ཡོད།ལྷག་ནིའི་དོན་ལུ་ ཐུམ་སྒྲིལ་བརྡ་དོན་ཡིག་སྣོད་ `%.255s' ཁ་ཕྱེ་ནི་ལུ་འཐུས་ཤོར་བྱུང་ཡོདཔ།སི་ཊེཊི་ཟུར་བཞག་ཡིག་སྣོད་ཁ་ཕྱེ་ནི་འཐུས་ཤོར་བྱུང་ཡོད།`%.255s' ལྷག་ནི་ལུ་འཐུས་ཤོར་འབྱུང་ཡོད་(`%.255s' ནང་ལུ་)ཡིག་མཛོད་ `%.250s' ལྷག་ནི་ལུ་འཐུས་ཤོར་བྱུང་ཡོདཔ།གཅིག་ཁར་སྡེབ་ཡོད་པའི་དུས་མཐུན་གྱི་ཡིག་སྣོད་ %.255s རྩ་བསྐྲད་གཏང་ནི་ལུ་འཐུས་ཤོར་བྱུང་ཡོད།ང་རང་བདག་དབང་གི་དུས་མཐུན་ཡིག་སྣོད་ %.255s རྩ་བསྐྲད་གཏང་ནི་ལུ་འཐུས་ཤོར་བྱུང་ཡོདཔ། `%.50s' གི་རྒྱས་བཤད་ཚུ་ `%.250s' ལུ་འབྲི་ནི་འཐུས་ཤོར་བྱུང་ཡོདཔ།ས་སྒོ་མིང་ `%.*s' འདི་ཀོ་ལཱོན་གྱིས་རྗེས་སུ་འབྲང་དགོཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ཨིན་ - `%.250s' བྲལག་སྟོར་ཞུགས་ནུགཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ཨིན་ - བྱང་ཉེས་ ཨེམ་ཌི་༥ ཅེག་སམ་  `%.250s'ཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ - བྱང་ཉེས་ཨང་ཡིག་(ཨང་རྟགས་ %d) %s ནང་ཡོད་མི་འདི་ཨིན།ཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ - བྱང་ཉེས་མིག་འཕྲུལ་ མགོ་ཡིག་གི་མཇུག་ཡང་ན་དང་པ་ཡོད་མི་འདི་ཨིན།ཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ཨིན་ - མགོ་ཡིག་གཉིས་པའི་མཇུག་ལུ་མིང་འཕྲུལ་བྱང་ཉེས།ཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ཨིན་ - བར་ཤབས་ཡིག་འབྲུ་བྱང་ཉེས་(ཨང་རྟགས་ %d)ཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ཨིན་ - `%.250s' གི་ཤུལ་ལས་གྲལ་ཐིག་གསརཔ་བརླག་སྟོར་ཞུགས་ཡོདཔ།ཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ཨིན་ - བརྡ་མཚོན་དབྱེ་མཚན་ནང་སྟོང་ཆ་ཚུ།ཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ཨིན་ - འཐུས་མི་གཉིས་པ་འདི་གནད་སྡུད་འཐུས་མི་མེན།ཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ཨིན་ - ཚད་འདི་ འདྲེན་རྟགས་ནང་བཙུགས་ཡོད་པའི་ཡན་ལག་ཨང་གི་དོན་ལུ་ཕྱི་འགྱུར་ཨིན།ཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ཨིན་པས་ -སྣ་མེད་ས་མེད་ཐུང་ཀུ།ཡིག་སྣོད་ `%.250s' འདི་ངན་ཅན་ཨིན་ - འདྲེན་རྟགས་ནང་བཙུགས་ཡོད་པའི་ཚད་ཚུའི་དོན་ལུ་ཡན་ལག་གི་ཨང་ཕྱི་འགྱུར།ཡིག་སྣོད་ `%.250s' འདི་ཡིག་མཛོད་ཡན་ལག་མེན།ཡིག་སྣོད་ `%s' འདི་ཡིག་མཛོད་ཀྱི་ཡན་ལག་ཅིག་མེན།
+ཡིག་སྣོད་ཚུ་ནང་གྲལ་ཐིག་གསརཔ་ཚུ་མེདཔ་འོང་།ཡིག་སྣོད་མིང་ "%s" འདི་ཡང་དག་མེན།ཡིག་སྣོད་ `%.250s' དང་ `%.250s' ཚུ་ཡིག་སྣོད་གཅིག་པ་གི་ཡན་ལག་མེན།ཐུམ་སྒྲིལ་ `%.250s' གི་དོན་ལུ་ཡིག་སྣོད་ཚུའི་ཐོ་ཡིག་སྣོད་ཀྱི་ནང་ན་ཡིག་སྣོད་མིང་སྟོངམ་འདུགཁ་སྤེལ་ནི་འཐུས་ཤོར་བྱུང་ཡོདཔ།གྲལ་ཐིག་ %d གུ་ལུ་ཁྲིམས་འགལ་ཐུམ་སྒྲིལ་མིང་: %.250sགཞི་བཙུགས་འབད་ཡོདཔ།--%s: `%.250s' གི་དོན་ལུ་ནུས་མེད་ཧྲིལ་ཨང་།འབྲེལ་ལམ་ %s འདི་ གཞི་རིམ་དང་བྲན་གཡོག་གཉིས་ཆ་རང་ཨིན།ཉེ་གནས་སྦེ་ : %s ལུ་ཁ་ཕྱོགས་སྒྱུར་ཡོད།
+རྒྱུན་སྐྱོང་པའི་ཡིག་ཚུགས་ `%.50s' ལུ་བྱང་ཉེས་གནང་བ་ %03lo ( >=0555 དང་ <=0775 ཨིན་དགོ་) འདུགརྒྱུན་སྐྱོང་པའི་ཡིག་ཚུགས་ `%.50s' འདི་ཉག་རྐྱང་ཡིག་སྣོད་ཡང་ན་བརྡ་མཚོན་འབྲེལ་ལམ་མེན།རྒྱུན་སྐྱོང་པའི་ཡིག་ཚུགས་ `%.50s' འདི་སི་ཊེཊི་འབད་བཏུབ་མེན།ཡིག་རྒྱུན་སྟོངམ་མེནམ་འོང་།ལུ་-ཁ་ཕྱོགས་སྒྱུར་ད་མ་མཐུནམ་
+   `%s'རྩ་བསྐྲད་གཏང་པའི་སྐབས་
+   `%s' འཐོབ་ཡོད།ཐུམ་སྒྲིལ་གུ་ལུ་མ་མཐུནམ་
+  `%s' རྩ་བསྐྲད་གཏང་པའི་སྐབས་
+  `%s' འཐོབ་ཡོད།མིང་  %s འདི་གཞི་རིམ་དང་བྲན་གཡོག་གཉིས་ཆ་རང་ཨིན།བྱ་བའི་གདམ་ཁ་གཅིག་དགོས་སྒོ་མིང་ `%.*s' ནང་གྲལ་ཐིག་གསརཔ།དུས་མཐུན་-སྤེལ་མའི་ཡིག་སྣོད་ཚུ་ (%s) ནང་ལུ་གྲལ་ཐིག་གསརཔ་ཚུ་བཀག་ཡོདཔ།`%.255s' ནང་ཐུམ་སྒྲིལ་གྱི་བརྡ་དོན་མེད།`%s' སྦེ་མིང་བཏགས་ཡོད་པའི་ཐུམ་སྒྲིལ་ག་ནི་ཡང་གཞི་བཙུགས་མ་འབད་ རིམ་སྒྲིག་འབད་མི་ཚུགས།གཞི་བཙུགས་མ་འབད་བས།གཞི་བཙུགས་མ་འབད་བས་ དེ་འབདཝ་ད་རིམ་སྒྲིག་སྡོདཔ་ཨིན།ཐོན་རིམ་ཨང་ནང་གི་ཀོ་ལཱོན་གྱི་ཤུལ་ལས་ག་ནི་ཡང་མེདཔ།`%.250s' འགོ་བཙུགས་པའི་སྐབས་ ཐུམ་སྒྲིལ་གི་ཐོན་རིམ་རྙིངམ་འདི་ལུ་གནམ་མེད་ས་མེད་རིངམ་བརྡ་དོན་ཡིག་སྣོད་མིང་འདུགཁ་ཕྱེ་ཡོད་མི་ཆ་ཤས་ `%.255s' (%.255s ནང་ལུ་) འདི་ རེ་བ་མེད་པའི་ཐབས་ལམ་ཅིག་ནང་ལུ་འཐུས་ཤོར་འབྱུང་ཡོདཔ།གཙང་དག་བཟོ་ནིའི་ཐོ་བཀོད་གསརཔ་གི་དོན་ལུ་དྲན་ཚད་ལས་ཕྱི་ཁ།སྒྲུབ་རྟགས་ལེ་ཤ་དང་ཅིག་ཁར་གཙང་དག་བཟོ་ནིའི་ཐོ་བཀོད་གསརཔ་གི་དོན་ལུ་དྲན་ཚད་ལས་ཕྱི་ཁར།ཐུམ་སྒྲིལ་ %.250s འདི་ཧེ་མ་ལས་གཞི་བཙུགས་དང་རིམ་སྒྲིག་འབད་ཡོདཔ་ཨིན།ཐུམ་སྒྲིལ་ %.250s འདི་རིམ་སྒྲིག་གི་དོན་ལུ་གྲ་སྒྲིག་མེད།
+ རིམ་སྒྲིག་འབད་མི་ཚུགས་(ད་ལྟའི་གནས་ཚད་ `%.250s')ཐུམ་སྒྲིལ་གྱི་བཟོ་བཀོད(%s)འདི་རིམ་ལུགས་(%s)དང་མི་མཐུན་པས།ཐུམ་སྒྲིལ་གྱི་ནང་ན་ གནམ་མེད་ས་མེད་རིངམ་ཚད་འཛིན་བརྡ་དོན་ཡིག་སྣོད་མིང་འདུག་(`%.50s' འགོ་བཙུགས་དོ།)ཐུམ་སྒྲིལ་ཚད་འཛིན་བརྡ་དོན་གྱི་ནང་ན་སྣོད་ཐོ་ `%.250s' འདུག`%.250s' གི་ཐུམ་སྒྲིལ་ཚད་འཛིན་བརྡ་དོན་ཨར་ཨེམ་སྣོད་ཐོ་གིས་སྣོད་ཐོ་མེན་ཟེར་མ་སླབ།ཐུམ་སྒྲིལ་གྱིས་གཞན་མི་ཚུ་: %s ལུ་ཁ་ཕྱོགས་སྒྱུརཝ་ཨིན།
+ཐུམ་སྒྲིལ་ལུ་གྲལ་ཐིག་གསརཔ་མེདཔ་འོང་།ཐུམ་སྒྲིལ་གྱི་མིང་འདི་ལུ་ མགྱོགས་ཡིག་ཀ་ཁའི་ཨང་ཡིག་ཡང་ན་ `-+.' མེན་མི་ཡིག་འབྲུ་ཚུ་ཡོད།ཡན་ལག་ %d འདི་བརླག་སྟོར་ཞུགས་ནུགཡན་ལག་ཡིག་སྣོད་ `%.250s' འདི་ཉག་རྐྱང་ཡིག་སྣོད་ཅིག་མེན།ཡན་ལག་ཚད་འདི་སྣ་མེད་ས་མེད་རིང་བ་ཡང་འདི་ཡོད་ཆ་མེན་པས།རྩིས་སྤྲོད་འབད་ཡོདཔ།
+སྔོན་-རྟེན་འབྲེལ་གྱི་དཀའ་ངལ་-  %.250s གཞི་བཙུགས་མི་འབ་དབས།གཙོ་རིམ་འདི་ཧྲིལ་ཨང་ཅིག་ཨིན་དགོ%.250s ནང་ལྷག་པའི་འཛོལ་བ།རིམ་སྒྲིག་ཡིག་སྣོད་ `%.255s' ནང་ལུ་ལྷག་པའི་འཛོལ་བ།ཚད་ལྡན་ཨིན་པུཊི་གུ་ལུ་ལྷག་པའི་འཛོལ་བ།རིམ་སྒྲིག་ཡིག་སྣོད་ནུས་སྤེལ་ལུ་ཨེསི་ཊི་ཌི་ཨིན་གུ་ལྷག་པའི་འཛོལ་བ།ལོག་འཛོམས་ཡོད་པའི་ཐུམ་སྒྲིལ་ཡིག་སྣོད།བསྐྱར་མིང་བཏགས་ནི་འདི་ `%s' 
+  ཡིག་སྣོད་ `%s' སོ་སོ་དང་དང་ཅིག་ཁར་ཚབ་སྲུང་འབད་ནི་དང་འབྲེལ་བ་འབདཝ་ཨིན། འབད་མི་ཆོགཞུ་བ་འབད་ཡོད་པའི་བཀོལ་སྤྱོད་པ་ལུ་ ལག་ལེན་པ་གཙོ་བོའི་ཁེ་དབང་དགོཔ་ཨིན།འཚོལ་ཞིབ་འབད་ཡོད་ དེ་འབདཝ་ད་ཐུམ་སྒྲིག་ཚུ་འཚོལ་མ་འཐོབ་(*.deb མཐུན་མི་ཡིག་སྣོད་ཚུ་)ཐུམ་སྒྲིལ་གྱི་བརྡ་དོན་ཐོ་བཀོད་ལེ་ཤ་ཅིག་ཐོབ་ཡོད་ གཅིག་རྐྱངམ་ཅིག་འབད་ཆོགའབྲན་གཡོག་འབྲེལ་ལམ་འདི་འབྲེལ་ལམ་གཙོ་བོ་ %s དང་ལྕོགས་རང་ཐད།འབྱུང་ཁུངས་ཡིག་སྣོད་ `%.250s' འདི་ཉག་རྐྱང་ཡིག་སྣོད་ཅིག་མེན།སི་ཊེཊི་ཟུར་བཞག་ཡིག་སྣོད་ཀྱི་ནང་ན་གྲལ་ཐིག་སྟོངམ་འདུགབཤུབ་ནི་རྒྱབ་ལུས་/ལས་སྦྱོར་ཡན་ལག་ %s སླར་ལོག་ཡོད་པའི་འཛོལ་བ་ གནས་ཚད་ %d ཕྱིར་ཐོན་འབདཝ་ཨིན།དམིགས་གཏད་འདི་སྣོད་ཐོ་ཨིན་ - ཚད་འཛིན་ཡིག་སྣོད་ཞིབ་དཔྱད་ གོམ་འགྱོ་མི་ཚུགས།འདི་ནང་ལུ་ཡན་ལག་ %d གི་ཐོན་རིམ་ལེ་ཤ་ཅིག་འདུག་ - ཉུང་མཐའ་ `%.250s' དང་ `%.250s'ཐུམ་སྒྲིལ་གྱི་ཐོན་རིམ་གསརཔ་འདི་ནང་ལུ་ཡིག་ཚུགས་མེད།-བཀོག་བཞག་དོ།ཨིན་པུཏི་ཡན་ལག་ཡིག་སྣོད་ `%.250s' (ལོག་)ཁ་ཕྱེ་མ་ཚུགས།`%.250s' གི་གནས་ས་ཞིབ་དཔྱད་འབད་མ་ཚུགས།ཡིག་མཛོད་ `%.250s' གི་གནས་སའི་དོན་ལུ་ཞིབ་དཔྱད་འབད་མ་ཚུགས།`%.255s' གི་དོན་ལུ་རྒྱབ་ཐག་བརྡ་མཚོན་འབྲེལ་ལམ་ཅའུན་འབད་མ་ཚུགས།ཐོན་རིམ་གཞན་མི་ཅིག་གཞི་བཙུགས་མ་འབད་བའི་ཧེ་མ་ `%.255s' མཐའ་འཁོར་ཁམས་ལོག་སི་སི་ཚུ་བསལ་གཏང་ནི་འབད་མ་ཚུགས། `%.250s' གི་དུས་མཐུན་བཟོ་ཡོད་པའི་གནས་ཚད་ཀྱི་དོན་ལུ་ ཁ་བསྡམ་མ་ཚུགས།`%.255s' གསར་བསྐྲུན་འབད་མ་ཚུགས།ཚད་འཛིན་བརྡ དོན་ཡིག་སྣོད་ `%.250s' བཏོན་གཏང་མ་ཚུགས།ལག་ལེན་འཐབ་ཡོད་པའི་དོས་ཁང་ཡིག་སྣོད་ `%.250s' བཏོན་གཏང་མ་ཚུགས།`%.250s' བཏོན་བཀོག་མ་ཚུགས།%.250s བར་ཤབས་དང་ཅིག་ཁར་བཀང་མ་ཚུགས།%.250s འདི་བར་ཤབས་ཀྱི་ཤུལ་ལས་ངོས་སྙོམ་འབད་མ་ཚུགས། `%.250s' གི་དུས་མཐུན་བཟོ་ཡོད་པའི་གནས་ཚད་ངོས་སྙོམ་འབད་མ་ཚུགས།འབྱུང་ཁུངས་ཡིག་སྣོད་ ཨེཕ་སི་ཊེཊི་འབད་མ་ཚུགས། `%.250s' གི་དུས་མཐུན་བཟོ་ཡོད་པའི་གནས་ཚད་ཀྱི་དོན་ལུ་ ཨེཕ་མཉམ་འབྱུང་འབད་མ་ཚུགས།`%.250s' འདི་ `%.250s' སྦེ་གཞི་བཙུགས་འབད་མ་ཚུགས།བརྡ་དོན་ཡིག་སྣོད་`%.50s'གསརཔ་གཞི་བཙུགས་འབད་མ་ཚུགས།བརྡ་དོན་ཡིག་སྣོད་ `%.250s' འདི་ `%.250s' སྦེ་གཞི་བཙུགས་འབད་མ་ཚུགས།`%.255s' གི་ཐོན་རིམ་གསརཔ་གཞི་བཙུགས་འབད་མ་ཚུགས། `%.250s' གི་དུས་མཐུན་བཟོ་ཡོད་པའི་གནས་ཚད་ཀྱི་དོན་ལུ་ གཞི་བཙུགས་འབད་མ་ཚུགས།ཐོན་རིམ་གསརཔ་གཞི་བཙུགས་མ་འབད་བའི་ཧེ་མ་ `%.255s' གི་རྒྱབ་ཐག་འབྲེལ་ལམ་བཟོ་མ་ཚུགས།`%.255s' གི་དོན་ལུ་རྒྱབ་ཐག་བརྡ་མཚོན་འབྲེལ་ལམ་བཟོ་མ་ཚུགས།ཐོན་རིམ་གསརཔ་གཞི་བཙུགས་འབད་ནིའི་དོན་ལས་  `%.255s' ཟུར་ཁ་བཤུད་མ་ཚུགས།དོས་ཁང་ཡིག་སྣོད་གསརཔ་ `%.250s' ཁ་ཕྱེ་མ་ཚུགས།ཨའུཊི་པུཏི་ཡིག་སྣོད་ `%.250s' ཁ་ཕྱེ་མ་ཚུགས།འབྱུང་ཁུངས་ཡིག་སྣོད་ `%.250s' ཁ་ཕྱེ་མ་ཚུགས།གནས་སྐབས་ཚད་འཛིན་སྣོད་ཐོ་ཁ་ཕྱེ་མ་ཚུགས།དོས་ཁང་སྣོད་ཐོ་ `%.250s' ལྷག་མ་ཚུགས།%.250s གི་དོན་ལུ་ ཡིག་སྣོད་འགྲེལ་བཤདཔ་ཟུར་རྟགས་ཚུ་ལྷག་མ་ཚུགས།འབྲེལ་ལམ་ `%.255s' ལྷག་མ་ཚུགས།ཡན་ལག་ཡིག་སྣོད་ `%.250s' ལྷག་མ་ཚུགས།`%.250s' གི་ཐོན་རིམ་གསརཔ་སྦེ་ཕྱིར་ཐོན་འབད་འབད་བའི་ཐོན་རིམ་རྩ་བསྐྲད་གཏང་མི་ཚུགས།`%.250s' གི་གསརཔ་སྦེ་གཞི་བཙུགས་འབད་འབད་བའི་ཐོན་རིམ་རྩ་བསྐྲད་གཏང་མི་ཚུགས།གསརཔ་སྦེ་གཞི་བཙུགས་འབད་ཡོད་པའི་ `%.250s' ཐོན་རིམ་འདི་རྒྱབ་ཐག་འདྲ་བཤུས་ཀྱི་ལོག་གཞི་བཙུགས་འབད་ནི་རྩ་བསྐྲད་གཏང་མི་ཚུགས།ཕན་མེད་བརྡ་དོན་ཡིག་སྣོད་`%.50s'རྩ་བསྐྲད་གཏང་མ་ཚུགས།དོས་ཁང་ཡིག་སྣོད་གསརཔ་ `%.250s' འདི་ `%.250s' ལུ་བསྐྱར་མིང་བཏགས་མ་ཚུགས།ཡན་ལག་ཡིག་སྣོད་ `%.250s' ལོག་ཁ་ཕྱེ་མ་ཚུགས།`%.250s' གི་རྒྱབ་ཐག་ཐོན་རིམ་སོར་ཆུད་འབད་མི་ཚུགས།%.250s འདི་བར་ཤབས་ཀྱི་ཤུལ་ལས་འགོ་བཙུགས་ནི་འཚོལ་མ་ཙུགས།%.250s གི་དོན་ལུ་ ལག་ལེན་འཐབ་ནིའི་-གུ་-ཁ་བསྡམ་ནི་ཟུར་རྟགས་གཞི་སྒྲིག་འབད་མ་ཚུགས།`%.250s' གུ་ལུ་ལག་ལེན་འཐབ་པའི་གནང་བ་གཞི་སྒྲིག་འབད་མ་ཚུགས།%s `%.250s' སི་ཊེཊི་འབད་ནི་འཐུས་ཤོར་བྱུང་ཡོད།`%.250s' སི་ཊེཊི་འབད་མ་ཚུགས།ད་ལྟོ་གཞི་བཙུགས་འབད་ཡོད་པའི་རིམ་སྒྲིག་ཡིག་སྣོད་ `%.250s' སི་ཊེཊི་འབད་མ་ཚུགས།གཞན་མི་ཡིག་སྣོད་གསརཔ་ `%.250s' སི་ཊེཊི་འབད་མ་ཚུགས།ཐོན་རིམ་གཞན་མི་ཅིག་གཞི་བཙུགས་མ་འབད་བའི་ཧེ་མ་ སོར་ཆུད་འབད་ཡོད་པའི་ `%.255s' འདི་སི་ཊེཊི་འབད་མ་ཚུགས། `%.250s' གི་དུས་མཐུན་བཟོ་ཡོད་པའི་གནས་ཚད་ཀྱི་དོན་ལུ་ཆུང་ཀུ་བཟོ་མ་ཚུགས། `%.250s' གི་དུས་མཐུན་བཟོ་ཡོད་པའི་གནས་ཚད་འབྲི་མ་ཚུགས།གྲལ་ཐིག་ %d གུ་ལུ་ ཐུམ་སྒྲིལ་དང་སེལ་འཐུ་གི་ཤུལ་ལས་རེ་བ་མེད་པའི་གནད་སྡུད།%.255s ནང་གི་ %s ནང་ལུ་ཡིག་སྣོད་ཀྱི་རེ་བ་མེད་པའི་མཇུགགྲལ་ཐིག་ %d གུ་ལུ་ཐུམ་སྒྲིལ་མིང་གི་ཤུལ་ལས་རེ་བ་མེད་པའི་གྲལ་ཐིག་གི་མཇུགགྲལ་ཐིག་ %d གུ་ལུ་ཐུམ་སྒྲིལ་མིང་ནང་ལུ་རེ་བ་མེད་པའི་གྲལ་ཐིག་གི་མཇུགམ་ཤེས་པའི་སྒྲུབ་རྟགས་ `%s'མ་ཤེས་པའི་ཨེབ་བཙུགས་ཀྱི་དབྱེ་བ་ `%s'!མ་ཤེས་པའི་བང་བཙོང་ནི་/ངོས་ལེན་མི་འབད་ནིའི་གདམ་ཁ་ `%.*s'མ་ཤེས་པའི་འཛོལ་བ་ -%cམ་ཤེས་པའི་འཛོལ་བ --%sགྲལ་ཐིག་ %d གུ་ལུ་མ་ཤེསཔ་དགོ་པའི་གནས་ཚད་: %.250sབཤུབ་ཡོད་ དེ་འབདཝ་ད་རིམ་སྒྲིག་མ་འབད་བས།དུས་མཐུན་བཟོ་ཡོད་པའི་སྣོད་ཐོའི་ནང་ན་ ཡིག་སྣོད་ `%.250s' ག་གི་མིང་རིང་དྲགས་མི་(རིང་ཚད་=%d མང་མཐའ་=%d)འདི་ཡོདཔ་ཨིན།དུས་མཐུན་བཟོ་ཡོད་མི་སྣོད་ཐོའི་ནང་ན་ ཡིག་སྣོད་ རིང་ཚད་མིང་སོ་སོ་འབད་མི་( %d དང་ %d གཉིས་ཆ་ར་)ཚུ་ཡོདཔ་ཨིན།ལག་ལེན་པ་-ངེས་འཛིན་འབད་ཡོད་པའི་ས་སྒོའི་མིང་ `%.*s' ཐུང་དྲགས།ཐོན་རིམ་གྱི་ཡིག་རྒྱུན་འདི་གིས་བར་སྟོང་ཚུ་གནས་འདྲེན་འབད་ཡོདཔ།ཐོན་རིམ་གྱི་ཡིག་རྒྱུན་འདི་སྟོངམ་ཨིན།ཉེན་བརྡ།ཁྱོད་ཀྱིས་ཐུམ་སྒྲིལ་ཚུ་ དེ་ཚུ་འོང་མི་ཡིག་སྣཽད་ཚུའི་མིང་ཚུ་འདྲེན་ཚིག་བཀོད་དེ་མེན་པར་ ཁོང་རའི་མིང་གིས་སྦེ་གསལ་བཀོད་འབད་དགོ 
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/el.gmo dpkg-1.20.7.1/po/el.gmo
--- dpkg-1.20.7.1-orig/po/el.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/el.gmo	2021-06-09 18:25:14.547502807 -0500
@@ -0,0 +1,300 @@
+����<�!?�!a�!=S"&�"-�".�"#.&#U# q#4�#�#5�#-$.G$0v$1�$$�$4�$/3%c%({%$�%�%�%:	&6D&1{&1�&!�&('*'6'U')m'9�'.�''(&((3O(5�(�(�(�(�(�())#)8)I)X)-o)H�)Q�)A8*ez*f�*7G+<+B�+�+,
1, ?,`,5y,1�,�,�,#-!0-R-Ko-5�--�-!.A.5[.�.,�..�../4/HT/6�/(�/>�/<0�H0-�01[61g�1�240)43Z41�4�4�4*�425�75-�6/
+7]:7�7G�78�7,8K8(j8:�8 �8-�89�59�:��:��;�b<�-=�=��= |>5�>,�>$?%?-?9?E?6R?!�?.�?,�?@%&@L@%k@"�@&�@�@�@;
A3IA}AA�A�A&�A""BEEB,�B"�B-�B5	C,?CGlC�C*�C"�C D:D"RDuD�D*�DJ�DE"E=EUE-tE)�E%�E�EF)&FPFoF!�F!�F�F%�F%G;GXG!mG�G �G-�G#�G+H%KH$qH�H �H�H:�H!I;IWItI$�I�I�I�I�IJ/J!OJqJ5�J �J2�J%K@K0`K*�K/�K6�KV#L.zL(�L+�L)�L4(M4]M;�M<�M:N7FN0~N;�N?�N$+OAPO$�O!�O�Oc�O[P:yP<�P�P'�P4%Q)ZQ�Q	�Qk�Q/R"AR^dR@�R!S&S@SXSOqS8�S*�S%T7=T5uT!�T�T�T5U"6U4YU
�U �U%�UG�U?+V#kV7�V2�VY�VfTW4�WF�W17X;iX�X.�X.�X "YDCY�Y&�Y-�Y�Y.�Y'ZCZXZ)oZ�Z&�Z�Z�ZH[0Q[6�[4�[�[%\%4\Z\+o\+�\4�\F�\@C],�]R�]'^	,^Z6^4�^2�^�^G_Y]_+�_%�_1	`+;`Ng`3�`*�`a2/a+ba,�a�a"�a$�a*bIb*eb&�b3�b4�b5 c)Vc,�cD�c*�c4d&Rd#yd#�d%�d(�d.e9?e'ye*�e.�e�e!f4:f4of[�f,g4-g#bg,�g/�g+�g-h=hXh2ph&�hB�h.
i1<i3ni*�i6�i&j4+j1`j�j�j"�j�j�j(k:kSVkM�k(�k"!lDl`\l��ltTn��n{to3�o@$pQep�pY�p3*q=^qd�q5r^7rZ�rQ�rHCsR�s7�s\tTtt�tX�tF@uE�uC�uvvd�vc�vaQwA�w]�w
Sx4ax*�xb�x}$yl�y]zRmzq�zu2{�{�{"�{�{!|*|J|%c|�|�|%�|I�|�,}��}WS~��~�Lm�ne�}Ԁ4R�2��
��1ȁ1��T,�e�� �'�U0�9��6�����k��d�2V�2��[��.�TG�d��I�.K�gz���bl��ψU�Cf�-��-؊��=��ҍ�Q
+�]\�P���&�S9�v����_��R��;�
+������MB�L��`ݘq>�[��r�2�X��B�KN�\��K��)C�Cm���3ϣ��h��$��!�.�H�!b�h��^��SL�k��h��u�N�xP�Dɨp�L�2̩���n��Y���X�G�X*�\����H}�rƭG9�X��Yڮp4�C��T�N>�"��"��\Ӱ&0�W�Sc����4G�/|�M��/��e*�x��?	�DI�*��N��=�IF�K��?ܵ?�N\�^��:
+�4E�Iz�8ķU��eS�D��D��JC�M��7ܹS�0h����.:�Ji�9��5�R$�9w�:��6�7#�5[�]��_�NO�{��P�Xk�=ĿI�pL�c��Q!��s���Y��YH�r��c�ky�v���\����z��r�zu�����w�P��c�U��RO�d����D��n���_�#��N�eV�M��$
+�/��J�^�:z����xQ�l��'7�%_�%��n��S�an�G��m�j��f��=X�9��X��?)�i�,��W�dn����vy�`���Q�[���1��������t��`�5a�d��S��IP����#0�UT�a���U�ct�-��/�O6�L��y��8M������[a�}���;�g��O$�Lt�8��T��ZO�����-�n��L"��o�T��	H��R�N��j;�9������c�f�Fg�X��m��u�s�l��/��_&�P��a��69�Cp�R��j�Tr�w��??�{�n��wj�W��m:����W?����I�Nd�L��c�Md�h��~�K��O��n6�8��K��b*�l�����o��f.�Z��[��PL�Q��R��FB�C��w��{E�����\�k��pRf�r*D�r�kU"�4�1!K"mS�A��&��x|]�IS��3W{CM��rX#.v�0�v�&���)+G�orY�U`�1T:��6�dqA���`�a�X\6�����2_N�=yS����D@���hA�d����p��[������D�7B�Ii	�,f�Ue~"ER����k�<�:2�V;�|�x)@�[�3T,�/F0
+<�7s���u'R]�^�9PP�q�QQi�?�I��;Kb�!�J}��bL/�(�
+e���zjE�c���HBc�x$�|p%Zl-�^t Lz�{8.��S���*~W��8�$�n�o]ZK������un_9My�V���5t?wg*!�	l����'�O&����>���G�m�H(�
>���gh#f�m�5j����Y���\�+%w4FkJas��=�� �1"O
�CN�}-�4
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s to be configured is %s.
+ %d in %s:  %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+%s breaks %s%s conflicts with %s%s depends on %s%s enhances %s%s pre-depends on %s%s recommends %s%s suggests %s'%s' clashes with '%s''%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix; however:
+<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<package status and progress file descriptor>Authenticating %s ...
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NamePackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want Processing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+The following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Version[default=N][default=Y][no default]archive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerawaiting trigger processing by another packagebroken due to failed removal or installationbroken due to postinst failurecan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)couldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdiversion by %s from: %s
+diversion by %s to: %s
+divert-to may not contain newlinesdiverted by %s to: %s
+done
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesempty trigger names are not permittedepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror opening conffiles fileerror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind trigger interest file '%.250s'failed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to write details of '%.50s' to '%.250s'fgets gave an empty string from '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefork failedillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal pending trigger name '%.255s': %sinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinvalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'link %s is both primary and slavelocal diversion from: %s
+local diversion to: %s
+locally diverted to: %s
+maintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentspackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage diverts others to: %s
+package has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage may not contain newlinespackage name has characters that aren't lowercase alphanums or '-+.'part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepassed
+pre-dependency problem - not installing %.250spriority must be an integerread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package fileremoval of %.250srename involves overwriting '%s' with
+  different file '%s', not allowedrequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave link same as main link %ssource file '%.250s' not a plain filestatoverride file contains empty linestripping trailing /subprocess %s returned error exit status %dsyntax error in file triggers file '%.250s'target is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving uptoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers looping, abandonedtrying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)unable to (re)open input part file '%.250s'unable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to seek to start of %.250s after paddingunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to stat %s '%.250s'unable to stat '%.250s'unable to stat current installed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat triggers deferred file '%.250s'unable to truncate for updated status of '%.250s'unable to write new triggers deferred file '%.250s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptyyou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:48+0200
+Last-Translator: quad-nrg.net <yodesy@quad-nrg.net>
+Language-Team: Greek <debian-l10n-greek@lists.debian.org>
+Language: el
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+X-Generator: KBabel 1.11.4
+
+ trigger εκκρεμών πακέτων που είναι ή πιθανόν να είναι ανεπίλυτοι:
+
+Το αρχείο ρυθμίσεων `%s', δεν υπάρχει στο σύστημα.
+Εγκατάσταση νέου αρχείου config όπως ζητήσατε.
+     Η έκδοση στο πακέτο είναι η ίδια με της τελευταίας εγκατάστασης.
+     όχι απλό αρχείο           %.255s
+  %.250s (έκδοση %.250s) είναι παρόν και %s.
+  %.250s (έκδοση %.250s) πρόκειται να εγκατασταθεί.
+  %.250s είναι %s.
+  %.250s είναι εγκατεστημένο, αλλά είναι έκδοση %.250s.
+  %.250s δεν έχει εγκατασταθεί.
+  %.250s πρόκειται να απορρυθμιστεί.
+  %.250s πρόκειται να εγκατασταθεί, αλλά είναι έκδοση %.250s.
+  %.250s πρόκειται να αφαιρεθεί.
+  %.250s είναι αποσυμπιεσμένο αλλά δεν έχει ρυθμιστεί.
+  %.250s είναι αποσυμπιεσμένο αλλά είναι έκδοση %.250s.
+  %.250s τελευταία ρυθμισμένη έκδοση είναι %.250s.
+   %.250s παρέχει %.250s και είναι παρόν και %s.
+  %.250s παρέχει %.250s και είναι προς εγκατάσταση.
+  %.250s παρέχει %.250s αλλά είναι %s.
+  %.250s παρέχει %.250s αλλά πρόκειται να απορρυθμιστεί.
+  %.250s παρέχει %.250s αλλά πρόκειται να αφαιρεθεί.
+  %s (%s) παρέχει %s.
+  Το πακέτο %s περιμένει την επεξεργασία των trigger.
+  Το πακέτο %s δεν έχει ρυθμιστεί ακόμη.
+  Το πακέτο %s δεν είναι εγκατεστημένο.
+  Το πακέτο %s πρόκειται να αφαιρεθεί.
+  Το πακέτο %s που παρέχει το %s περιμένει την επεξεργασία των trigger.
+  Το πακέτο %s που παρέχει το %s δεν έχει ακόμα ρυθμιστεί.
+  Το πακέτο %s που παρέχει το %s δεν είναι εγκατεστημένο.
+  Το πακέτο %s που παρέχει το %s πρόκειται να αφαιρεθεί.
+  Η έκδοση του %s στο σύστημα είναι %s.
+  Η έκδοση του %s που πρόκειται να ρυθμιστεί είναι %s.
+ %d σε %s:  %s (%s) "σπάει" το %s και είναι %s.
+ το %s (όχι κοινό αρχείο)
+ ==> Διατήρηση παλιού αρχείου ρυθμίσεων ως προεπιλογή.
+ ==> Ο διανομέας του πακέτου έχει κυκλοφορήσει μια ανανεωμένη έκδοση.
+ ==> Γίνεται χρήση του τωρινού παλιού αρχείου όπως ζητήσατε.
+ ==> Χρήση του νέου αρχείου ρυθμίσεων ως προεπιλογή.
+ ==> Γίνεται χρήση νέου αρχείου όπως ζητήσατε.
+ Η προεπιλεγμένη ενέργεια είναι να εγκατασταθεί η νέα έκδοση.
+ Η προεπιλεγμένη ενέργεια είναι να κρατήσετε την τωρινή έκδοση.
+ και  εξαρτάται από %s (υποδιεργασία): %s
+%s "σπάει" το %s%s συγκρούεται με %s%s εξαρτάται από %s%s βελτιώνει %s%s προεξαρτάται από %s%s συνιστά το %s%s προτείνει %s`%s' συγκρούεται με `%s'πεδίο `%s', μη έγκυρο όνομα πακέτου `%.255s': %s`πεδίο %s', λείπει το όνομα πακέτου, ή σκουπίδια εκεί που αναμένονταν το όνομα πακέτουτο πεδίο `%s', αναφορά σε `%.255s':
+ `%c' είναι εκτός χρήσης, χρησιμοποιείστε `%c=' ή `%c%c'πεδίο `%s', αναφορά σε `%.255s':
+ κακή σχέση έκδοσης %c%cπεδίο `%s', αναφορά σε `%.255s':
+ απόλυτο ταίριασμα στον αριθμό έκδοσης, προτείνεται η χρήση `='πεδίο `%s', αναφορά σε `%.255s':
+ η τιμή έκδοσης ξεκινά με μη αλφαριθμητικό, πρόταση προσθήκης κενούπεδίο `%s' field, αναφορά σε `%.255s': η έκδοση είναι μη τερματισμένηπεδίο `%s', συντακτικό σφάλμα μετά την αναφορά στο πακέτο `%.255s'(Σημειώνεται η εξαφάνιση του %s, το οποίο έχει αντικατασταθεί πλήρως)
+(Ανάγνωση βάσης δεδομένων ... (χωρίς διαθέσιμη περιγραφή), core dumped-%c επιλογή δεν παίρνει τιμή-%c επιλογή παίρνει μια τιμή--%s --pending δεν παίρνει κανένα όρισμα μη επιλογής--%s --recursive χρειάζεται τουλάχιστον ένα όρισμα μονοπατιού--%s χρειάζεται <name>--%s χρειάζεται <name> <path>η --%s χρειάζεται ένα όρισμα ονόματος αρχείου .deb--%s χρειάζεται ένα όρισμα <directory>--%s χρειάζεται μόνο ένα όρισμαη --%s χρειάζεται έναν κατάλογο στόχο.
+Ίσως πρέπει να χρησιμοποιήσετε dpkg --install ;--%s χρειάζεται τουλάχιστον ένα αρχείο πακέτου ως παράμετρο--%s χρειάζεται τουλάχιστον ένα όρισμα ονόματος πακέτου--%s επιλογή δεν παίρνει τιμή--%s επιλογή παίρνει μια τιμήη --%s παίρνει το πολύ δύο ορίσματα (.deb και κατάλογο)η --%s δεν παίρνει ορίσματαη --%s παίρνει μόνο ένα όρισμα (όνομα αρχείου .deb)η --auto απαιτεί ακριβώς ένα αρχείο τμήματος ως παράμετροη --auto απαιτεί τη χρήση της επιλογής --output--compare-versions κακή συσχέτιση--compare-versions παίρνει τρία ορίσματα: <έκδοση> <σχέση> <έκδοση>η --search χρειάζεται τουλάχιστον μια παράσταση ονομάτων αρχείων ως παράμετροη --split χρειάζεται ένα όρισμα πηγαίου ονόματος αρχείουη --split δέχεται το πολύ ένα όνομα αρχείου πηγής και ένα πρόθεμα προορισμού. Ωστόσο:
+<deb> είναι το όνομα αρχείου ενός πακέτου με μορφή Debian.
+<cfile> είναι το όνομα μιας συνιστώσας ενός διαχειριστικού αρχείου.
+<cfield> είναι το όνομα ενός πεδίου στο κύριο αρχείο `ελέγχου'.
+
+<package status and progress file descriptor>Γίνεται πιστοποίηση %s ...
+Εντολές:
+  --check-supported                Έλεγξε αν το dpkg που εκτελείται υποστηρίζει triggers.
+
+Εντολές:
+  -s|--split <file> [<prefix>]     Διάσπαση ενός πακέτου.
+  -j|--join <part> <part> ...     Συνένωση κομματιών.
+  -I|--info <part> ...             Εμφάνιση πληροφορίας για ένα κομμάτι.
+  -a|--auto -o <complete> <part>   Αυτόματη-συσσώρευση κομματιών.
+  -l|--listq                       Παράθεση κομματιών που δεν ταιριάζουν.
+  -d|--discard [<filename> ...]    Αγνόησε κομμάτια που δεν ταιριάζουν.
+
+Τελεστές σύγκρισης για την επιλογή --compare-versions είναι:
+  lt le eq ne ge gt       (αντιμετώπισε την κενή έκδοση σαν προγενέστερη από οποιαδήποτε άλλη);
+  lt-nl le-nl ge-nl gt-nl (αντιμετώπισε την κενή έκδοση σαν μεταγενέστερη από οποιαδήποτε άλλη);
+  < << <= = >= >> >       (μόνο για συμβατότητα με την σύνταξη του αρχείου ελέγχου).
+
+Debian %s έκδοση %s.
+Backend έκδοση %s του αρχείου πακέτου του Debian `%s'.
+Πρόγραμμα διαχείρισης πακέτων του Debian `%s' έκδοση %s.
+Εργαλείο split/join πακέτων του Debian `%s'; έκδοση %s.
+Διεγράφη το %s.
+ΠεριγραφήΠροέκυψαν σφάλματα κατά την επεξεργασία του:
+Το αρχείο `%.250s' δεν είναι μέρος μιας πολυτμηματικής αρχειοθήκης.
+Σύνταξη διαμόρφωσης:
+  Μια διαμόρφωση είναι μια ακολουθία χαρακτήρων που θα παράγεται σαν έξοδος για κάθε πακέτο. Η διαμόρφωση
+  μπορεί να περιέχει τις συνήθεις ακολουθίες διαφυγής \n (newline), \r (carriage
+  return) ή \\ (απλό backslash). Πληροφορία για το πακέτο μπορεί να περιλαμβάνεται 
+  εισάγοντας αναφορές μεταβλητών στα πεδία των πακέτων χρησιμοποιώντας την σύνταξη ${var[;width]}
+  Τα πεδία στοιχίζονται στα δεξιά εκτός αν το πλάτος είναι αρνητικό στην οποία
+  περίπτωση θα χρησιμοποιηθεί στοίχιση στα αριστερά.
+Εγκατάσταση νέας έκδοσης του αρχείου ρυθμίσεων %s ...
+Βρέθηκαν αρχεία σκουπίδια στον κατάλογο depot:
+Έχουν αποσυμπιεστεί περισσότερα από ένα αντίγραφα
+του πακέτου %s ! Θα ρυθμιστεί μόνο μια φορά.
+ΌνομαΤο πακέτο %s είναι σε συγκράτηση, δεν θα επεξεργαστεί.  Χρησιμοποιήστε το --force-hold για να παρακάμψετε.
+Το πακέτο %s δόθηκε περισσότερες από μία φορές, η επεξεργασία θα γίνει μόνο μία φορά.
+Το πακέτο `%s' δεν περιέχει κανένα αρχείο (!)
+Τα πακέτα δεν έχουν επανασυναρμολογηθεί:
+Το τμήμα %d του πακέτου %s αρχειοθετήθηκε (ακόμη θέλει Η επεξεργασία σταμάτησε γιατί προέκυψαν πάρα πολλά σφάλματα.
+Καταγράφτηκαν πληροφορίες ελέγχου για το %s από %s.
+Αντικατάσταση πληροφοριών διαθέσιμων πακέτων, με χρήση του %s.
+Γίνεται εγκατάσταση %s (%s) ...
+Τα παρακάτω πακέτα περιμένουν την επεξεργασία των trigger που έχουν
+ενεργοποιήσει σε άλλα πακέτα.  Η επεξεργασία αυτή μπορεί να ζητηθεί χρησιμοποιώντας
+τα dselect ή dpkg --configure --pending (ή dpkg --triggers-only):
+Τα ακόλουθα πακέτα είναι χάλια λόγω σοβαρών προβλημάτων κατά την
+εγκατάσταση. Πρέπει να επανεγκατασταθούν (και όσα πακέτα
+εξαρτώνται από αυτά) για να λειτουργήσουν κατάλληλα:
+Τα ακόλουθα πακέτα είναι μισορυθμισμένα, λόγω προβλημάτων
+αρχικής ρύθμισης.  Πρέπει να ξαναγίνει προσπάθεια ρύθμισης με
+το dpkg --configure <πακέτο> ή με την επιλογή μενού ρύθμιση στο dselect:
+Τα ακόλουθα πακέτα είναι μισοεγκατεστημένα, λόγω προβλημάτων στην
+αρχική εγκατάσταση. Η εγκατάσταση ίσως συμπληρωθεί προσπαθώντας ξανά.
+Τα πακέτα μπορούν να αφαιρεθούν με το dselect ή dpkg --remove:
+Τα ακόλουθα πακέτα έχουν "ενεργοποιηθεί", αλλά η επεξεργασία των trigger 
+δεν έχει γίνει ακόμα.  Η επεξεργασία αυτή μπορεί να ζητηθεί χρησιμοποιώντας
+dselect ή dpkg --configure --pending (ή dpkg --triggers-only):
+Τα ακόλουθα πακέτα έχουν αποσυμπιεστεί αλλά δεν έχουν ρυθμιστεί.
+Για να λειτουργήσουν πρέπει να ρυθμιστούν με το dpkg --configure
+ή με την επιλογή μενού Ρύθμιση στο dselect:
+Πληκτρολογήστε `exit' όταν τελειώσετε.
+Πληκτρολογήστε dpkg-deb --help για βοήθεια σχετικά με διαχείριση αρχείων
+*.deb. Πληκτρολογήστε dpkg --help για βοήθεια σχετικά με εγκατάσταση και
+απεγκατάσταση πακέτων.Δώστε dpkg-split --help για βοήθεια.Πληκτρολογήστε dpkg-trigger --help για βοήθεια σχετικά με αυτό το βοηθητικό πρόγραμμα.Ανανέωση πληροφοριών διαθέσιμων πακέτων, με χρήση του %s.
+Usage: %s [<option> ...] <command>
+
+Έκδοση[προεπιλογή=Ο][προεπιλογή=Ν][καμία προεπιλογή]το αρχείο περιείχε το αντικείμενο `%.255s' άγνωστου τύπου 0x%xη αρχειοθήκη δεν έχει χαρακτήρες newline στην κεφαλίδααναμονή της επεξεργασίας trigger από άλλο πακέτοκατεστραμμένο λόγω αποτυχημένης αφαίρεσης ή εγκατάστασηςκατεστραμμένο λόγω σφάλματος μετά την εγκατάσταση (postinst)αδύνατη η απεικόνιση στη μνήμη (mmap) του αρχείου πληροφοριών των πακέτων `%.255s'αδύνατη η διαγραφή του παλιού σεναρίου postrmαδύνατη η εύρεση κατάστασης του αρχείου πληροφοριών πακέτων `%.255s'αδύνατο το άνοιγμα του `%.255s' (στο `%.255s')αδύνατο το άνοιγμα του αρχείου τμήματος της αρχειοθήκης `%.250s'αδύνατη η ανάγνωση πληροφοριών καταλόγουαδύνατη η αφαίρεση του `%.250s'αδύνατη η διαγραφή του παλιού αντιγράφου αρχείου ρυθμίσεων του `%.250s' (από `%.250s')αδύνατη η διαγραφή παλιού αρχείου ρυθμίσεων του `%.250s' (= `%.250s')αδύνατη η διαγραφή της λίστας των παλιών αρχείωναδιέξοδο η ικανοποίηση των προεξαρτήσεων για το %.250s (ζητήθηκε λόγω του %.250s)αδύνατη η ανίχνευση του καταλόγου `%.255s'αδύνατη η σάρωση του καταλόγου ενημερώσεων `%.255s'αδύνατη η εύρεση κατάστασης (stat) του `%.255s' (στο `%.255s')ο χαρακτήρας `%c' δεν επιτρέπεται (επιτρέπονται μόνο γράμματα, ψηφία και χαρακτήρες `%s')το conffile `%.250s' δεν εμφανίζεται στο πακέτοαδύνατη η εύρεση της κατάστασης (stat) του αρχείου ρυθμίσεων `%.50s'συγκρουόμενες ενέργειες -%c (--%s) and -%c (--%s)συγκρουόμενες αποκλίσεις ανάμεσα σε `%.250s' ή `%.250s'συγκρουόμενα πακέτα - δε γίνεται εγκατάσταση %.250sο κατάλογος control έχει λάθος άδειες %03lo (χρειάζεται >=0755 και <=0775)αδύνατο το άνοιγμα του `%i' ως ροή (stream)προβλήματα εξάρτησης - αφήνεται μη ρυθμισμένοπροβλήματα εξάρτησης - δε γίνεται αφαίρεσηεκτροπή από %s σε: %s
+εκτροπή από %s σε: %s
+divert-to δεν θα πρέπει να περιέχει καινούριες γραμμέςεκτράπηκε από %s σε: %s
+έγινε
+επαναλβανόμενο πακέτο με trigger σε αναμονή `%.255s'επαναλαμβανόμενο αρχείο trigger interest για το όνομα αρχείου `%.250s' και το πακέτο `%.250s'επαναλαμβανόμενη διαδρομή %sδιπλός εκκρεμής trigger  `%.255s'επαναλαμβανόμενος δευτερεύων σύνδεσμος %sδιπλή τιμή για το πεδίο `%s'διπλασιασμός του καθοριζόμενου από το χρήστη πεδίο `%.*s'κενή συμβολοσειρά από την fgets κατά την ανάγνωση αρχείων ρυθμίσεωνδεν επιτρέπονται κενά ονόματα triggerη εποχή στην έκδοση δεν είναι αριθμόςσφάλμα κλεισίματος %.250sσφάλμα κλεισίματος αρχείου ρυθμίσεων `%.255s'σφάλμα κλεισίματος/εγγραφής `%.255s'σφάλμα κατά τη δημιουργία συσκευής `%.255s'σφάλμα κατά τη δημιουργία καταλόγου `%.255s'σφάλμα δημιουργίας συνδέσμου `%.255s'σφάλμα δημιουργίας σωλήνωσης `%.255s'σφάλμα δημιουργίας συμβολικού δεσμού `%.255s'σφάλμα κατά την επιβεβαίωση ότι το `%.250s' δεν υπάρχεισφάλμα ανοίγματος αρχείου conffilesσφάλμα κατά την ανάγνωση %.250sσφάλμα ανάγνωσης του %s από το αρχείο %.255sσφάλμα ανάγνωσης αρχείου conffilesσφάλμα από την ανάγνωση της σωλήνωσης του dpkg-debσφάλμα ανάγνωσης του αρχείου σε αναστολή λόγω trigger `% 250s'σφάλμα ρύθμισης ιδιοκτησίας του `%.255s'σφάλμα ρύθμισης ιδιοκτησίας του `%.255s'σφάλμα ορισμού  των δικαιωμάτων του `%.255s'σφάλμα ορισμού της χρονοσήμανσης του `%.255s'σφάλμα κατά το άνοιγμα του %.250sσφάλμα κατά την απελευθέρωση του σήματος %s: %s
+σφάλμα κατά την εγγραφή `%s'σφάλμα κατά την εγγραφή στην stderr, ανιχνεύθηκε πριν την προτροπή για το αρχείο ρυθμίσεωναποτυχία ανάθεσης μνήμηςαποτυχία αλλαγής καταλόγου (chdir) στο `%.255s'απέτυχε η αλλαγή καταλόγου (chdir)αποτυχία κατά το chroot στο `%.250s'αποτυχία κλεισίματος μετά την ανάγνωση: `%.255s'απέτυχε η δημιουργία καταλόγουαποτυχία δημιουργίας σωλήνωσηςαποτυχία αντιγραφής για το fd%dαποτυχία αντιγραφής για το std%sαπέτυχε η fstat στην αρχειοθήκηαποτυχία κατά την εκτέλεση της fstat στο αρχείο diversionsαποτυχία κατά την εκτέλεση της fstat στο αρχείο statoverrideαποτυχία κατά το άνοιγμα του αρχείου diversionsαποτυχία ανοίγματος αρχείου πληροφοριών πακέτου `%.255s' για ανάγνωσηαποτυχία κατά το άνοιγμα του αρχείου statoverrideαδύνατο το άνοιγμα αρχείου λίστας interest trigger `%.250s'απέτυχε η ανάγνωση `%.255s' (στο `%.255s')αδύνατο το άνοιγμα της αρχειοθήκης `%.255s'αποτυχία αφαίρεσης του συγχωνευμένου αρχείου ενημέρωσης %.255sαποτυχία αφαίρεσης το δικό μου ενημερωτικό αρχείο %.255sαδύνατη η επανατύλιξη αρχείου interest trigger `%.250s'αποτυχία καθορισμού κατάστασης (derefernce) του υπάρχοντος συμβολικού συνδέσμου `%.250s'αποτυχία απόδοσης κατάστασης (derefernce) του προτεινόμενου στόχου του συμβολικού συνδέσμου `%.250s' για τον συμβολικό σύνδεσμο `%.250s'αποτυχία εγγραφής λεπτομερειών του `%.50s' στο `%.250s'η fgets επέστρεψε μια κενή συμβολοσειρά από το `% 250s'το όνομα πεδίου `%.*s' πρέπει να ακολουθείται από άνω/κάτω τελείατο αρχείο `%.250s' είναι κατεστραμμένο - το %.250s αγνοειίταιτο αρχείο `%.250s' είναι κατεστραμμένο - λάθος άθροισμά MD5 `%.250s'το αρχείο `%.250s' είναι κατεστραμμένο - λάθος ψηφίο (κωδικός %d) στο %sτο αρχείο `%.250s' είναι κατεστραμμένο - λάθος κωδικός στο τέλος της πρώτης κεφαλίδαςτο αρχείο `%.250s' είναι κατεστραμμένο - λάθος κωδικός magic στο τέλος της 2ης κεφαλίδαςτο αρχείο `%.250s' είναι κατεστραμμένο - λάθος χαρακτήρας pad (κωδικός %d)το αρχείο `%.250s' είναι κατεστραμμένο - αγνοείται newline μετά το %.250sτο αρχείο `%.250s' είναι κατεστραμμένο - κενά στην ενότητα πληροφοριώντο αρχείο `%.250s' είναι κατεστραμμένο - το 2ο μέλος δεν είναι μέλος δεδομένωντο αρχείο `%.250s' είναι κατεστραμμένο - λάθος μέγεθος για συγκεκριμένο αριθμό τμήματοςτο αρχείο `%.250s' είναι αλλοιωμένο - πολύ βραχύτο αρχείο `%.250s' είναι κατεστραμμένο - λάθος αριθμός τμημάτων για τα δοσμένα μεγέθητο αρχείο `%.250s' δεν είναι τμήμα της αρχειοθήκηςτο αρχείο `%s' δεν είναι τμήμα της αρχειοθήκης
+το αρχείο δεν θα πρέπει να περιέχει καινούριες γραμμέςτο record των trigger αρχείου αναφέρει αθέμιτο όνομα πακέτου `%.250s' (για interest στο αρχείο `%.250s'): %.250sτο όνομα αρχείου "%s" δεν είναι απόλυτοτα αρχεία `%.250s' και `%.250s' δεν είναι κομμάτια του ίδιου αρχείουτο αρχείο λίστας αρχείων για το πακέτο `%.250s' περιέχει κενό όνομα αρχείουαποτυχία διχάλωσηςμη αποδεκτό όνομα πακέτου στη γραμμή %d: %.250sμη έγκυρο όνομα πακέτου για τον αναμενόμενο trigger `%.255s': %sμη έγκυρο όνομα trigger σε εκκρεμότητα `%.255s': %sεγκατάσταση του %.250sεγκατεστημένοη εγκατάσταση του %.250s θα "έσπαζε" το %.250s, και
+ δεν επιτρέπεται η απορύθμιση (το όρισμα --auto-deconfigure πιθανά να βοηθήσει)η εγκατάσταση του  %.250s θα "έσπαγε" υπάρχον λογισμικόμη έγκυρος ακέραιος για --%s: `%.250s'μη έγκυρη ή άγνωστη σύνταξη στο όνομα του trigger `%.250s' (στον trigger interests για το πακέτο `%.250s')μη έγκυρο όνομα πακέτου `%.250s' στους triggers καθυστερεί το αρχείο `%.250s'ο σύνδεσμος %s είναι ταυτόχρονα και πρωτεύων και δευτερεύωντοπική εκτροπή από: %s
+τοπική εκτροπή σε: %s
+τοπική εκτροπή σε: %s
+το σενάριο `%.50s' έχει λάθος άδειες %03lo (χρειάζεται >=0755 και <=0775)το σενάριο `%.50s' δεν είναι απλό αρχείο ή δεσμόςαδύνατη η εύρεση της κατάστασης (stat) του σεναρίου `%.50s'μπορεί να μην είναι κενό αλφαριθμητικόασυμφωνία κατά το divert-to
+  απομακρύνοντας το `%s'
+  βρέθηκε το`%s'ασυμφωνία στο πακέτο
+  απομακρύνοντας το `%s'
+  βρέθηκε το `%s'το όνομα %s είναι ταυτόχρονα και πρωτεύον και δευτερεύονχρειάζεται μια επιλογή ενέργειαςνέα γραμμή στο όνομα πεδίου `%.*s'απαγορεύονται newlines στα αρχεία (%s) του update-alternatives.καμία πληροφορία πακέτου στο  `%.255s'δεν είναι εγκατεστημένο κανένα πακέτο με όνομα `%s', δε γίνεται ρύθμισηδεν είναι εγκατεστημένοόχι εγκατεστημένο αλλά παραμένουν οι ρυθμίσειςδεν υπάρχει τίποτα μετά το κώλον (:) στον αριθμό έκδοσηςη παλιά έκδοση του πακέτου έχει υπερβολικά μεγάλο μήκος ονόματος αρχείου πληροφοριών`%.250s'το άνοιγμα του τμήματος `%.255s' (στο %.255s) απέτυχε με απρόσμενο τρόποη νέα εκκαθαριστική καταχώρηση βρέθηκε εκτός μνήμηςη νέα εκκαθαριστική καταχώρηση με αρκετά ορίσματα βρέθηκε εκτός μνήμηςτο πακέτο %.250s έχει ήδη εγκατεσταθεί και ρυθμιστείτο πακέτο %.250s δεν είναι έτοιμο για ρυθμίσεις
+ αδύνατη η ρύθμιση (τωρινή κατάσταση `%.250s')το πακέτο %.250s δεν είναι έτοιμο για επεξεργασία trigger
+ (τωρινή κατάσταση `%.250s' χωρίς trigger σε εκκρεμότητα)η αρχιτεκτονική του πακέτου (%s) δεν ταιριάζει με αυτή του συστήματος (%s)το πακέτο έχει υπερβολικά μεγάλο μήκος ονόματος αρχείου ελέγχου `%.250s'οι πληροφορίες ελέγχου του πακέτου περιείχαν τον κατάλογο `%.250s'δόθηκε rmdir του `%.250s' αλλά δεν δηλώθηκε ως μη κατάλογοςτο πακέτο εκτρέπει άλλα σε: %s
+το πακέτο έχει κατάσταση %s αλλά αναμένονται ακόμα triggersτο πακέτο έχει καθεστώς %s αλλά εκκρεμούν triggersτο πακέτο δεν θα πρέπει να περιέχει newlinesτο όνομα του αρχείου περιέχει χαρακτήρες που δεν είναι πεζοί αλφαριθμητικοί ή `-+'.λείπει το κομμάτι %dτο αρχείο τμήματος `%.250s' δεν είναι κοινό αρχείοτο μέγεθος του τμήματος είναι πολύ μεγάλο ή μη θετικόεπιτυχής
+πρόβλημα προεξάρτησης - δε θα εγκατασταθεί %.250sη προτεραιότητα πρέπει να είναι ένας ακέραιος αριθμόςσφάλμα ανάγνωσης στο %.250sσφάλμα ανάγνωσης στο `%.250s'σφάλμα ανάγνωσης στο αρχείο ρυθμίσεων `%.255s'σφάλμα ανάγνωσης στην πρότυπη είσοδο (stdin)σφάλμα ανάγνωσης της stdin κατά την προτροπή για το αρχείο ρυθμίσεωνανασυγκρότηση αρχείου πακέτουαφαίρεση του  %.250sη αλλαγή ονόματος περιλαμβάνει την υπεργραφή του `%s' με
+  το διαφορετικό αρχείο `%s', που δεν επιτρέπεταιη ζητούμενη ενέργεια απαιτεί προνόμια υπερχρήστηέγινε αναζήτηση, δε βρέθηκε κανένα πακέτα (αρχεία που ταιριάζουν *.deb)βρέθηκαν αρκετές εισαγωγές πληροφοριών πακέτου, μόνο μία επιτρέπεταιο δευτερεύων σύνδεσμος είναι ο ίδιος με τον πρωτεύοντα %sτο αρχείο πηγής `%.250s' δεν είναι κοινό αρχείοτο αρχείο statoverride περιέχει μια κενή γραμμήαφαίρεση των περισσευούμενων /η υποδιεργασία %s επέστρεψε κατάσταση λάθους %dσφάλμα ανάγνωσης στο αρχείο των trigger αρχείου `%.250s'ο προορισμός είναι κατάλογος - αδύνατη η παράλειψη ελέγχου αρχείου controlυπάρχουν αρκετές εκδόσεις του αρχείου τμήματος %d - τουλ. η `%.250s' και η `%.250s'δεν υπάρχει σενάριο στη νέα έκδοση του πακέτου - εγκατάλειψηπολύ μεγάλου μήκους ή απούσα newline στο `%.250s'σφάλμα σύνταξης στον trigger interest file `%.250s'. Μη νόμιμο όνομα πακέτου `% 250s': % 250sτο όνομα του trigger περιέχει μη έγκυρο χαρακτήραtriggeredτο αρχείο των triggers ci `%.250s' περιέχει μη θεμιτή σύνταξη trigger στο όνομα του trigger `%.250s': %.250striggers ci file περιέχει άγνωστη ντιρεκτίβα `%.250s'το αρχείο των triggers ci περιέχει άγνωστη σύνταξη ντιρεκτίβαςοι trigger είναι σε loop, τερματισμόςπροσπάθεια υπερεγγραφής του `%.250s', που είναι εκτραπείσα έκδοση του `%.250s'προσπάθεια υπερεγγραφής του `%.250s', που είναι η εκτραπείσα έκδοση του `%.250s' (πακέτο: %.100s)αδύνατο το άνοιγμα για είσοδο του αρχείου τμήματος `%.250s'αδύνατος ο έλεγχος ύπαρξης για το `%.250s'αδύνατος ο έλεγχος ύπαρξης της αρχειοθήκης `%.250s'αδύνατη η αλλαγή ιδιοκτήτη του εφεδρικού δεσμού για το `%.255s'αδύνατος ο καθαρισμός της σαβούρας γύρω από το `%.255s' πριν την εγκατάσταση άλλης έκδοσηςαδύνατο το κλείσιμο του νέου σε αναστολή λόγω trigger αρχείου `%.250s'αδυναμία κλεισίματος της ενημερωμένης κατάστασης του `%.250s'αδύνατη η δημιουργία `%.255s'αδύνατη η δημιουργία καταλόγου κατάστασης trigger `%.250s'αδύνατη η διαγραφή του αρχείου ελέγχου `%.250s'αδύνατη η διαγραφή χρησιμοποιημένου αρχείου depot `%.250s'αδύνατη η καταστροφή του `%.250s'αδύνατο το γέμισμα %.250s με παραγέμισηαδύνατο το καθάρισμα %.250s μετά από παραγέμισηαδυναμία καθαρισμού της ενημερωμένης κατάστασης του `%.250s'αδύνατο η εύρεση κατάστασης του αρχείου πηγήςαδύνατος ο συγχρονισμός (fsync) της ανανεωμένης κατάστασης του `%.250s'αδύνατη η εγκατάσταση `%.250s' ως `%.250s'αδύνατη η εγκατάσταση (υποτιθέμενου) νέου αρχείου πληροφοριών `%.250s'αδύνατη η εγκατάσταση νέου αρχείου πληροφοριών `%.250s' ως `%.250s'αδύνατη η εγκατάσταση του νέου σε αναστολή λόγω trigger αρχείου `%.250s'αδύνατη η εγκατάσταση της νέας έκδοσης του `%.255s'αδύνατη η εγκατάσταση της ενημερωμένης κατάστασης του `%.250s'αδυναμία δημιουργίας εφεδρικού δεσμού του `%.255s' πριν την εγκατάσταση νέας έκδοσηςαδυναμία δημιουργίας εφεδρικού δεσμού για `%.255s'αδύνατη η μετακίνηση του `%.255s' κατά μέρους για εγκατάσταση νέας έκδοσηςαδύνατο το άνοιγμα νέου αρχείου depot `%.250s'αδύνατο το άνοιγμα του αρχείου εξόδου `%.250s'αδύνατο το άνοιγμα του αρχείου πηγής `%.250s'αδύνατο το άνοιγμα προσωρινού καταλόγου ελέγχου (control)αδύνατο το άνοιγμα του αρχείου triggers ci `%.250s'αδύνατο το άνοιγμα του αρχείου σε αναστολή λόγω trigger `%.250s'αδύνατo το άνοιγμα/δημιουργία νέου αρχείου σε αναστολή λόγω trigger `%.250s'αδύνατη η ανάγνωση του καταλόγου depot `%.250s'αδύνατη η ανάγνωση του αρχείου triggers file `%.250s'αδύνατη η ανάγνωση των σημάνσεων περιγραφέα αρχείου του %.250sαδύνατη η ανάγνωση δεσμού `%.255s'αδύνατη η ανάγνωση αρχείου τμήματος `%.250s'αδύνατη η αφαίρεση της νεοεξαχθείσας έκδοσης του`%.250s'αδυναμία αφαίρεσης της νεο-εγκατεστημένης έκδοσης του`%.250s'αδύνατη η αφαίρεση της νεοεγκατεστημένης έκδοσης του `%.250s' για να επανεγκατασταθεί ένα εφεδρικό αντίγραφοαδύνατη η διαγραφή του παρωχημένου αρχείου πληροφοριών `%.250s'αδύνατη η μετονομασία του νέου αρχείου depot `%.250s' στο `%.250s'αδύνατο το επανάνοιγμα του αρχείου τμήματος `%.250s'αδύνατη η ανάκτηση της εφεδρικής έκδοσης του `%.250s'αδύνατο να ψάξω την αρχή του %.250s μετά το paddingαδύνατο να τεθεί η σήμανση close-on-exec για το %.250sαδύνατος ο ορισμός άδειας εκτέλεσης στο `%.250s'αδύνατη η εύρεση κατάστασης του %s `%.250s'αδύνατη η εύρεση κατάστασης του `%.250s'αδύνατη η εύρεση κατάστασης του τρέχοντος αρχείου ρυθμίσεων`%.250s'αδύνατος ο προσδιορισμός κατάστασης άλλου καινούριου αρχείου `%.250s'αδύνατη η εύρεση κατάστασης του επαναφερθέντος `%.255s' προτού εγκατασταθεί νέα έκδοσηαδύνατος ο προσδιορισμός κατάστασης του αρχείου σε αναστολή λόγω trigger `%.250s'αδύνατος ο ψαλιδισμός της ανανεωμένης κατάστασης του `%.250s'αδύνατη η εγγραφή του νέου σε αναστολή λόγω trigger αρχείου  `%.250s'αδυναμία εγγραφής της ενημερωμένης κατάστασης του `%.250s'απρόσμενα δεδομένα μετά το πακέτο και την επιλογή στη γραμμή %dαπρόσμενο τέλος αρχείου του %s στο %.255sαπρόσμενο τέλος της γραμμής μετά το όνομα πακέτου στη γραμμή %dαπρόσμενο τέλος της γραμμής στο όνομα πακέτου στη γραμμή %dάγνωστος όρισμα `%s'άγνωστος τύπος συμπίεσης '%s'!άγνωστη επιλογή force/refuse `%.*s'άγνωστη επιλογή -%cάγνωστη επιλογή --%sάγνωστη ζητούμενη κατάσταση στη γραμμή %d: %.250sαποσυμπιεσμένο αλλά όχι ρυθμισμένοο κατάλογος ενημερώσεων περιέχει το αρχείο `%.250s' το όνομα του οποίου είναι πολύ μακρύ (μέγεθος=%d, μεγ=%d)ο κατάλογος ενημερώσεων περιέχει αρχεία με διαφορετικά μεγέθη ονομάτων (και %d και %d)το προσδιορισμένο από το χρήστη όνομα πεδίου `%.*s' είναι πολύ μικρόη συμβολοσειρά έκδοσης περιέχει ενσωματωμένα κενάτο αλφαριθμητικό της έκδοσης είναι κενόΘα πρέπει να ορίσετε τα πακέτα με το όνομά τους και όχι με το όνομα των αρχείων τους
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/en@boldquot.header dpkg-1.20.7.1/po/en@boldquot.header
--- dpkg-1.20.7.1-orig/po/en@boldquot.header	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/en@boldquot.header	2021-06-09 18:22:47.473275398 -0500
@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
diff -Naurp dpkg-1.20.7.1-orig/po/en@quot.header dpkg-1.20.7.1/po/en@quot.header
--- dpkg-1.20.7.1-orig/po/en@quot.header	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/en@quot.header	2021-06-09 18:22:47.473275398 -0500
@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
diff -Naurp dpkg-1.20.7.1-orig/po/eo.gmo dpkg-1.20.7.1/po/eo.gmo
--- dpkg-1.20.7.1-orig/po/eo.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/eo.gmo	2021-06-09 18:25:14.600502888 -0500
@@ -0,0 +1,703 @@
+������:�N?�Na�Nk;O��O�oP&�P=Q&UQ|Q-�R.�R�R.�R-S IS4jS�S5�S-�S.T0NT1T$�T4�T/U;UqSU(�U$�UV3V:SV6�V1�V1�V!)W2KW(~W�W�W�W.�WXS'X{X�X�X9�Xm�X)kY:�Y9�Y.
+Z'9Z&aZ�Z3�Z5�Z[[v[[�[U�[D\Y\j\w\�\Z�\�\]�]=�] ^5^F^�U^=1`Ro`1�`D�`L9aA�a'�a&�a(b'@b+hb4�b!�b,�b9c-Rc�c#�c�c$�cd"#dFd!dd#�d�d�d�d�d�d"e2>e1qe/�e�e.�ef-4fRbfH�fQ�fAPge�gf�gI_h7�h<�hi(1iBZi�i�i�i
�i �ij5*j1`j0�j�j�j#�j!k4kQkKnk7�k5�k-(lVl!pl�l'�l-�l-m 0m5Qm�m �m�m$�m,n.2n.an�nH�n6�n(0o>Yo$�o �o�o�opp�(p�p#�p:q-=rkr|r�r�r*�r<�r#s-8s-fs��s)t6t�Mt[Cu��ug�y
{|(}(A}-j}�}8�}<�}.*~Y~0p~3�~1�~/�;1�*"�JM�2���ˀ&p�2��EʂV�g�5��.��-�+�/?�
o�%}�/��*ӄ&��!%�]G���!��M̅�20��c���"��ʉ4�.�5M�3����GǊ8�,H�u�(����ԋ��3��)-�$W�:|�,��V� ;�\�*x�����&ȍ3�-#�+Q�,}�	����ʎ*�
�#� @�Ha���������g5�j������4��5��������u[�&іA��{:�!��,ؗ*�.0�_��~��� ��5��ݚ ��,�$B�.g�>��*՛;�,<��i�$�u,����"{�������9Þ(��X&�3�?��8�2,�1_�,��:��4��5.�4d�A��Mۡ-)�W�k�#����Ƣۢ� �1'�8Y�?��Bң6�L�&h�.��!��!�5�8�U�k�������	��9ƥ.�#/�,S�����%���%�-*�1X�����)��1�:�?V�&����=ڨ7�P�!j�.��*��#�"
+�&-�0T�����@��+��;$�3`�����A̫�&-�-T�0��;��0�( �?I�)��-��"��4�EO���,��"ݮ!�"�5A� w�8��ѯ�-��5-�,c�B��BӰ+�GB�$�� ��:б;�G�`�&o���7���D�cM���2��*�"�3>�:r�-��&۴��4�J�"f�����(��=ϵ*
�J8���"����ж�-�5�)F�%p�������ط�����)#�M�l�!��!��#ϸ�%�%6�'\�,����ʹ�*�'1�'Y���!���� պ-��#$�#H�+l�%��$��� �� �9�L�"b�:����Fڼ!�=�Z�$w�����ͽ�#��!�9�!Y�"{�:��پ5�� .�2O���%����0׿*�$3�/X���6��V��"%�(H�q�<��.��)��(�*@�+k���,��)��4
+�3?�2s�4��;��<�6T�:��7��@��0?�;p�?��$��A�=S�$��0��!��	�b$���c��	�:'�<b�=��_��H=���������)��)�$6��[�\��&<�&c�'�� ��7��t�2��-��'��4	�.>�)m�G��-��
�	$�k.�/����>��%�$D�#i�&��!����!��"�^:�@����%��+�7;�!s������������O!�8q�*���������3�G�_�7z�5����|��
+{���m��0�GE���)��!�����5,�b�y�"��4����!�C%�=i�%��
�� ��(��%�%B�7h���I��G�PJ�G��.��?�#R�7v�#��+��2��Y1�f��L��M?�&��K��3�=4�r���=����4�F6�1}�;��&���1�P�%j�.��.��a��eP� ����D��)�H�_�&r�-��7�����
�.+�Z�c�|�"��������)��$�&A�"h�"��"����6��!�@�7R�B��H��&�0=�n�6����$��4��(�OD�
+��
+����
+��%����%�*:�e�
l�z�+��7��+��!�$A�4f�F��@��6#�1Z���,��R��'&�$N�	s�Z}�4��2
�'@�h�.��D��G��Y@�Q��^��%K�+q�2��%��%��1�+N�Nz���!��3�*9�d�5~���"��$��2�+J�+v�,������"�$'�L�!f�*����*��0��0+�&\�3��4��5��)"�,L�y�D��*��4��0�H�f�&�#��#��%��(�.=�9l�'��*��.��(�!E�g�(}�(��4��4�[9�,��4��#��,�"H�"k�/��/��+��+�-F�*t�&��!�����"� :�2[�0��&��B��#)�.M�|����� ��1��#�7�!Q�3s���*�����6#�&Z� ��.����4��1�+P�|���"������"�3�G�Z�!n�(������:��"/#RSvM�E(^(�*�.�0
+";I^�4�(�"8Pc��B�`�9B'|#�`��)E�d
+o����"F	;i	/�	
+�	0�
+*<7P��7��:7Q1�.�2�%
5C
1y
�
y�
,=*j!��>�<<Q/�'�9�, Me�0��<�
+" ?6`n�;6B4y4�4�+D2X1��
���^e=�*7L[^����I��#2F6Z}>�EQ]G�.�-&.T-�4�B�))<SA�7�
+$) N&o�#��#�%BYo�"�'�8�>!2`�<��+ _, K� Z� @3!qt!j�!JQ"5�":�"
#4"#>W#�#�#�#
�#!�#$42$3g$9�$�$�$+%#0%!T%v%C�%9�%;&1P&�&"�&�&)�&5
'9C'$}':�'"�'"(#(&C(0j(4�(-�('�(G&)Cn)/�)?�)$"*#G*k*�*	�*�*��*W+%g+R�++�,
-
-
(-6-'H-9p-)�-0�-3.�9.�.�.
+�.a�/^0|m4�5-718"G8.j8�8;�89�8-,9Z9/p90�92�9::	,:�6:7	; A;Ob;8�;��;�=8�=M�=V5>�>:�>%�>3?0@?2q?�?"�?5�?'@)4@^@bz@�@$�@WA_AFrA��A�mCE 4E8UE*�E3�E2�E FP7F>�F-�F�F6GLGQG"cG
+�G6�G)�G&�G2H.LHL{H!�H�H$�H$I=I)OI=yI8�I8�I+)JUJ$\J�J#�J$�J%�J"KJ/KzK��K�SLfMhjM��M��N'O/�O��O��P�nQnR%�RA�R��R!xS1�S,�S+�S%T�BT��U"gV9�V�V!�V6�V+6W9bW?�W(�W>X+DX�pXYY�`Y��Y!�Z
�Z
�Z�ZA[+V[^�[>�[J \Dk\;�\@�\.-]=\]=�]5�]=^8L^Z�^-�^_#_&>_(e_�_�_
+�_�_;�_<`IA`F�`6�`	a+'a9Sa0�a�a=�ab6bLbabub�b�bF�b)�b($c2Mc'�c+�c6�c(d44d8id7�d�d$�d4e;Ne9�e<�e)f+fBKf?�f�f(�f2g.Gg+vg(�g3�g/�g!/hQh:jh+�hO�hC!i&ei�iG�i%�i1j*Kj>vjI�j5�j/5kPek6�k4�k1"l Tl5ulD�l#�l&m";m'^m!�m9�m&�mE	nOnan,yn:�n+�n>
o@Lo(�oN�o p&p?Fp>�p�p
�p*�p(qN>q%�qG�qn�qjr9zr,�r$�r4s<;s1xs+�s�s�stt*2t]tut'}tL�t%�tJucu%vu�u�u�u6�u
$v92v+lv�v�v�v �v�vww*9w"dw"�w'�w'�w.�w )x)Jx)tx+�x2�x�x(y)Cy+my0�y-�y�y+z%?z%ez:�z5�z&�z5#{(Y{*�{�{*�{�{|,|'G|Io|$�|R�|"1}"T}*w}+�} �}�}~*~5H~(~~-�~/�~-?3(s@�,�B
+�M�-c�)��;��;��13�>e���D��e�2f�4��΂A�5(�8^�*��-0��$!�6F�*}�?��7�8 �=Y�W��I�?9�;y�9��E�45�@j�O��*��P&�Lw�(Ĉ6�%$�J�Zh�'Ép�$\�D��GƊF�qU�Nǋ�/�O�m�,��+��'܌��^��1�2#�0V�#��<��y�2b�,��'3�,�2K�K~�/ʐ��	�m�2����=̑&
+� 1�R�$r�"����#ْ$��e"�H��ѓ'�#	�1-�&_�������ɔޔ��^�Hg�5�����%�;1�m���<��6��t9���$��a�9F�O��%И%��&�C�$[�;����ՙ�;�)H�'r�=��<ؚ)�?� L�5m���#Û2��M3�N��_МT0�8��>��&��<$�%a�,��0��T�g:�J��K�.9�Jh�2��A�(�D�=d���6��L�26�Ei�%��բ���%-�1S�=��Zã^�$}���E���� �23�9f�A����$�0�
+F�!Q�s�+����Ҧ�$��!�/=�&m�&��)���4��3�S�5d�M��P�09�6j���E��
+��#
+�F.� u�Q�����%�)�35�i�/��3������+�6>�1u�'��&ϬG��I>�>��5ǭ:��8�5U�]��&�+�<�bD�7��;߯8�!T�1v�F��F�U6�S��_�%@�6f�0��&β/��0%�>V�J���&��?$�2d���2���%��*#�/N�1~�3��4��4�$L�'q� ��*��6�$�>A�<��=��'��;#�=_�A��*߸4
+�?�MR�7��8ع�$,�"Q�0t�+��+Ѻ+��-)�<W�G��+ܻ/�88�q�'����(ͼ-��2$�3W�W��4�?�-X�3����ھ8��73�1k�E��-�0�3B�%v�#��'�� ��%	�;/�1k�2��O��) �@J�&��%��!��+��7&�^�t�'��@����0�K�i�5��%��#��'�+�.F�,u�.�������'�B�)`�������!��2��&�#A�1e�%��&��b��UG�M��0��3�6P�8��@��"�J$�o�;w�&��#�����#/�S�Z�Go�k��:#�&^���j��P�S���j�q������>�y��E~��c��F7r68��g��	j��o��\I$iT���:Ju!�0F���s�znM	B�#��h�V�N*�� )����������w�������N��Ur�7��z���:d�R�;6^S0�xL{������1�����
��I�x�w����������b%v�W����t�$��8�O;u�/{=0���X��5p�Cw�B\��������d8&�m��_}-���tF*���-5yrU_C.P.���#k$v�c��QM��{ ��=l;;2^����l/HgCR��	�+�����1�W��3����'j������k+_���S�){�]��<�f��T��?�(BK��A���6�y��1��`�(�L+
+N|����sI	%(T��:z�b��g�DU�/�����z�q9��'�o�R����E%�`'�C�d���"
+:����"c��V�p>��
+DaPum���@��A�]W�g�Y,��������O������,a)�E�sY�!L�7MN�x�����h��Zj�}��w>L&�"c�9JR�ZiXf�M��*��`�����Of�27�1t9,���P�e�%��\�4*�-rZ
+Gx�K�����H��)a(}�^9�Be��o�!����pQ�3v�_h�5-X8�����F�![2�^|s�WQZ��mhn?�K�k=���~�~H�[��l�q�<
k�3�?&�G�[ea�b�V`@�#��@vo���S����0��=.�Ib�G���n����Y������J~ dl��4���>$����\����5[���n.����/V�EH�i4|,f�}�TQ�G��D�&���@�t<��U����K�p Ae���iY]��qm����#A
�y����?�
D<�X|4'��"O��6�]�3+���J�u��2
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s suggests %s%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one package name argument--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMore than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenVersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open security status notification channelcannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentgenerated corrupt ar header for '%s'header is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file or streamunexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion number does not start with digitversion string has embedded spacesversion string is emptyversioned Provideswait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:49+0200
+Last-Translator: Felipe Castro <fefcas@gmail.com>
+Language-Team: Esperanto <debian-l10n-esperanto@lists.debian.org>
+Language: eo
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n!=1);
+X-Generator: Poedit 1.6.10
+
+ traktotaj ekigiloj de pakoj kiuj estas aŭ povas esti nesolveblaj:
+
+Akomoda dosiero '%s', ne ekzista en la sistemo.
+Ni instalas novan akomodan dosieron laŭ via peto.
+
+Senerarigaj elektebloj povas esti miksataj uzante bit-al-bita 'or'.
+Rimarku ke la signifoj kaj valoroj povas esti ŝanĝotaj.
+
+Uzu `dpkg' por instali kaj forigi pakojn el via sistemo, aŭ
+'apt' aŭ 'aptitude' por uzant-faciliga pak-administrado. Pakoj
+elpakitaj uzante 'dpkg-deb --extract' estos malkorekte instalitaj !
+
+AVERTO - uzo de elektebloj markitaj per [!] povas serioze damaĝi vian instaladon.
+Perfortaj elektebloj markitaj per [*] estas ebligataj apriore.
+     Ne modifita ekde la instalo.
+     Versio en pako estas sama ol tiu de la lasta instalo.
+     ne estas ordinara dosiero          %.255s
+   Kion vi dezirus fari pri ĝi ?  Viaj alternativoj estas:
+    Y aŭ I  : instali la version de la pakzorganto
+    N aŭ O  : teni vian nune-instalitan version
+      D     : montri la malsamojn inter la versioj
+      Z     : lanĉi ŝelon por kontroli la situacion
+  %.250s (versio %.250s) ĉeestas kaj estas %s.
+  %.250s (versio %.250s) estas instalota.
+  %.250s estas %s.
+  %.250s estas instalita, sed ĝi estas versio %.250s.
+  %.250s ne estas instalita.
+  %.250s estas malakomodota.
+  %.250s estas instalota, sed ĝi estas versio %.250s.
+  %.250s estas forigota.
+  %.250s estas malpakita, sed ĝi neniam estis akomodata.
+  %.250s estas malpakita, sed ĝi estas versio %.250s.
+  lasta akomodita versio de %.250s estas %.250s.
+  %.250s provizas %.250s kaj ĉeestas kaj %s.
+  %.250s provizas %.250s kaj ĝi estas instalota.
+  %.250s provizas %.250s sed ĝi %s.
+  %.250s provizas %.250s sed ĝi estas malakomodota.
+  %.250s provizas %.250s sed ĝi estas forigota.
+  %s (%s) provizas %s.
+  -?, --help                       Montri tiun ĉi help-mesaĝon.
+      --version                    Montri la version.
+
+  La pako %s atendas procezadon de ekigilo.
+  La pako %s ankoraŭ ne estas akomodita.
+  La pako %s ne estas instalita.
+  La pako %s estas forigota.
+  La pako %s, kiu provizas %s, atendas procezadon de ekigilo.
+  La pako %s, kiu provizas %s, ankoraŭ ne estas akomodita.
+  La pako %s, kiu provizas %s, ankoraŭ ne estas instalita.
+  La pako %s, kiu provizas %s, estas forigota.
+  Versio de %s en la sistemo estas %s.
+  Versio de %s en la sistemo, provizita de %s, estas %s.
+  Versio de %s por esti akomodata estas %s.
+  ligo nune malĉeestas  ligo nune kondukas al %s  sklavo %s: %s %7jd bajtoj, %5d linioj   %c  %-20.127s %.127s
+ %d en %s:  %d pako, el la jena sekcio: %d pakoj, el la jenaj sekcioj: %s (%jd bajtoj)
+ %s: (%s) rompas %s kaj estas %s.
+ %s (ne estas ordinara dosiero)
+ ==> Forigita (de vi aŭ de skripto) ekde la instalo.
+ ==> Dosiero en sistemo kreita de vi aŭ de skripto.
+ ==> Dosiero ankaŭ en pako provizita de la pakzorganto.
+ ==> Ni tenas la malnovan agordo-dosieron kiel implicitan.
+ ==> Modifita (de vi aŭ de skripto) ekde la instalo.
+ ==> La pak-distribuanto lanĉis ĝisdatan version.
+ ==> Ni uzas nunan malnovan dosieron laŭ via peto.
+ ==> Ni uzas novan agordo-dosieron kiel implicitan.
+ ==> Ni uzas novan dosieron laŭ via peto.
+ Pako %s: parto(j)  La implicita ago estas instali la novan version.
+ La implicita ago estas teni vian nunan version.
+ kaj  dependas je %d atendita programo ne estis trovata en PATH aŭ ne estas lanĉebla
+%s%d atenditaj programoj ne estis trovataj en PATH aŭ ne estas lanĉeblaj
+%s%d dosiero aŭ dosierujo aktuale instalita.)
+%d dosieroj kaj dosierujoj aktuale instalitaj.)
+%d petita reg-elemento mankas%d petitaj reg-elementoj mankas%s (subprocezo): %s
+%s - prioritato %d%s rompas %s%s konfliktas kun %s%s misrompita: %s%s rafiniga elekteblo, --debug=<okumo> aŭ -D<okumo>:
+
+ Numero  Ref. en fonto    Priskribo
+%s dependas je %s%s plibonigas %s%s perfortaj elektebloj - reg-konduto kiam problemoj trovitas:
+  averti sed daŭrigi: --force-<afero>,<afero>,...
+  ĉesi kun eraro:     --refuse-<afero>,<afero>,... | --no-force-<afero>,...
+ Perfortaj aferoj:
+%s ne estas korekte instalita; ni preteratentas iun ajn dependecon je ĝi%s antaŭdependas je %s%s rekomendas %s%s sugestas %s%s:
+    Part-forma versio:                 %d.%d
+    Parto de pako:                     %s
+        ... versio:                    %s
+        ... arkitekturo:               %s
+        ... kontrolsumo MD5:           %s
+        ... longeco:                   %jd bajtoj
+        ... disigi je ĉiu:             %jd bajtoj
+    Part-numero:                       %d/%d
+    Part-longeco:                      %jd bajtoj
+    Part-deŝovo:                       %jd bajtoj
+    Part-dosiera grando (uzata parto): %jd bajtoj
+
+%s: conffile '%.250s' ne estas plata dosiero aŭ simbola ligo (= '%s')%s: conffile '%.250s' solvigas al degenerita dosiernomo
+ (`%s' estas simbola ligo al `%s')%s: akomoda dosiero '%s' estas ringa (cirkla) ligilo
+ (= `%s')%s: dependecaj problemoj, tamen iel ajn ni akomodas laŭ via peto:
+%s%s: dependecaj problemoj, tamen ni forigas ekigilojn eĉ tiel, laŭ via peto:
+%s%s: dependecaj problemoj, tamen ni forigas eĉ tiel, laŭ via peto:
+%s%s: eraro dum kunligado de enigo al bzip2-fluo%s: eraro dum kunligado de enigo al gzip-fluo%s: eraro dum kunligado de eligo al bzip2-fluo%s: eraro dum kunligado de eligo al gzip-fluo%s:malsukceso dum ligigo de '%.250s' al '%.250s': %s%s: malsukceso dum forigo de '%.250s' (antaŭ ol anstataŭigi): %s%s: malsukceso dum forigo de '%.250s': %s%s: malsukceso dum forigo de malnova sekurkopio '%.250s': %s%s: malsukcesis forigi malnovan distribuitan version '%.250s': %s%s: malsukceso dum renomigo de '%.250s' al '%.250s': %s%s: interna leg-eraro de bzip2%s: interna leg-eraro de bzip2: '%s'%s: interna skrib-eraro de bzip2%s: interna skrib-eraro de bzip2: '%s'%s: interna leg-eraro de gzip%s: interna leg-eraro de gzip: '%s'%s: interna skrib-eraro de gzip%s: interna skrib-eraro de gzip: %s%s: interna skrib-eraro de gzip: '%s'%s: ferm-eraro de lzma%s: eraro de lzma: %s%s: leg-eraro de lzma%s: skrib-eraro de lzma%s: eraro de preter-pasa kopio: %s%s: ne eblas malfermi %s por haketi: %s%s: ne eblas uzi readlink je conffile '%s'
+ (= `%s'): %s%s: ne eblas legi staton de akomoda dosiero '%s'
+ (= `%s'): %s'%.255s' enhavas neniun regadan elementon '%.255s''%s' kolizias kun '%s''%s' enhavas tiun valoron Priority difinitan de uzanto: '%s''%s' ne akceptas valoronkampo '%s', malvalida pak-nomo '%.255s': %skampo '%s', mankas arkitektura nomo; aŭ estas rubaĵo tie, kie arkitektura nomo estis atendatakampo '%s', mankanta pak-nomo, aŭ rubaĵo tie, kie pak-nomo estis atenditakampo `%s', referenco al '%.255s':
+ '%c' estas malaktuala, uzu '%c=' aŭ '%c%c' anstataŭekampo '%s', referenco al '%.255s':
+ malĝusta versio-rilato %c%ckampo `%s', referenco al '%.255s':
+ implicita ekzakta kongruo al versi-numero, ni sugestas uzon de '=' anstataŭekampo `%s', referenco al '%.255s':
+ versio-valoro komencas per ne-alfanumero, ni sugestas aldonon de spacokampo '%s', referenco al '%.255s': malvalida arkitektura nomo '%.255s': %skampo '%s', referenco al '%.255s': versio ne finigitakampo '%s', sintaksa eraro post referenco al pako '%.255s''%s' bezonas valoron'%s' ne estis trovata en PATH aŭ ne estas lanĉebla(Ni rimarkas malaperon de %s, kiu estas entute anstataŭita.)
+(Legado de datumbazo ... (neniu priskribo disponeblas)(entute %jd bajtoj)
+, nekropsiitaelekteblo -%c ne akceptas valoronelekteblo -%c postulas valoron--%s --pending prenas neniun ne-elektecan argumenton--%s --recursive bezonas minimume unu voj-parametro--%s bezonas argumenton kun dosiernomo .deb kaj dosierujo--%s bezonas <nomo>--%s bezonas <nomo> <vojo>--%s bezonas argumenton kun dosiernomo .deb--%s bezonas argumenton <dosierujo>--%s bezonas argumenton <dosiero>--%s bezonas unuopan argumenton--%s bezonas celatan dosierujon.
+Eble vi devus uzi dpkg --install ?--%s postulas validan pak-nomon sed '%.250s' ne estas: %s--%s bezonas minimume unu pakan arkivan dosieran argumenton--%s bezonas minimume unu argumenton por pak-nomo--%s bezonas kvar argumentojnelekteblo --%s ne akceptas valoronelekteblo --%s postulas valoron--%s postulas pozitivan okuman argumenton--%s postulas unu aŭ pli part-dosierajn argumentojn--%s prenas maksimume unu argumenton por dosiero Packages--%s prenas maksimume du argumentojn--%s prenas maksimume du argumentojn (.deb kaj dosierujon)--%s prenas precize unu argumenton--%s prenas precize du argumentojn--%s postulas neniun argumenton--%s prenas unu argumenton de pak-nomo--%s prenas nur unu argumenton (dosiernomo .deb)--auto postulas precize unu part-dosieran argumenton--auto postulas uzon de la elekteblo --outputmalĝusta rilato por --compare-versions--compare-versions postulas tri argumentojn: <versio> <rilato> <versio>--search bezonas minimume unu modelon de dosiernomo kiel argumenton--split bezonas argumenton pri fonta dosiernomo--split prenas maksimume fontan dosiernomon kaj celan prefikson--update indikite sed %s ne ekzistas--update estas neutila por --remove... ŝajne ĉio sukcesis.../%s; tamen:
+<kompakti> el tar -cf<deb> estas la dosiernomo de Debian-forma arkivo.
+<c-dosiero> estas la nomo de administra dosier-elemento.
+<cfield> estas la nomo de kampo en la ĉefa dosiero 'control'.
+
+<malkompaktigo><ligo> kaj <vojo> ne povas esti samaj<ligo> estas simbol-ligo kondukanta al %s/<nomo>.
+  (ekz. /usr/bin/pager)
+<nomo> estas mastra nomo por tiu ĉi ligo-grupo.
+  (ekz. pager)
+<vojo> estas la loko de unu el la alternativaj cel-dosieroj.
+  (ekz. /usr/bin/less)
+<prioritato> estas entjero; elektebloj kun pli grandaj numeroj havas pli altan prioritaton en
+  aŭtomata reĝimo.
+
+<pak-stato kaj progresa dosier-priskribilo><norma eraro><norma enigo><norma eligo>Aldonado de '%s'
+Permesi instalon de konfliktantaj pakojAlternativo %s neŝanĝita ĉar elekto %s ne disponeblas.Ĉiam instali mankantajn akomod-dosierojnĈiam uzi la novajn akomod-dosierojn, ne demandiĈiam uzi la malnovajn akomod-dosierojn, ne demandiAlia procezo ŝlosis la datumbazon por skribado, kaj ĝi povos esti modifanta
+ĝin nun, kelkaj el la sekvaj problemoj povos esti ĝuste pro tio.
+ArkitekturoAŭtentikigado de %s ...
+Komandojs:
+  --add <posedanto> <grupo> <reĝimo> <vojo>
+                           aldoni novan registron <vojo> en la datumbazon.
+  --remove <vojo>          forigi <vojo>-on el la datumbazo.
+  --list [<glob-ŝablono>]  listigi nunajn preterpasojn en la datumbazo.
+
+Komandoj:
+  --check-supported                Kontroli ĉu la plenumata dpkg subtenas ekigilojn.
+
+Komandoj:
+  --install <ligo> <nomo> <vojo> <prioritato>
+    [--slave <ligo> <nomo> <vojo>] ...
+                           aldoni grupon de alternativoj al la sistemo.
+  --remove <nomo> <vojo>   forigi <vojon> el la grupo de alternativo <nomo>.
+  --remove-all <nomo>      forigi grupon <nomo> el la sistemo de alternativoj.
+  --auto <nomo>            ŝalti la mastran ligon <nomo> al aŭtomata reĝimo.
+  --display <nomo>         montrigi informon pri la grupo <nomo>.
+  --query <nomo>           maŝin-analizebla versio de --display <nomo>.
+  --list <nomo>            montrigi ĉiujn celojn de la grupo <nomo>.
+  --get-selections         listigi mastrajn alternativajn nomojn kaj ties statojn.
+  --set-selections         legi alternativajn statojn el la norma enigo.
+  --config <nomo>          montri alternativojn por la grupo <nomo> kaj peti de la
+                           uzanto por elekti unu.
+  --set <nomo> <vojo>      difini <vojo> kiel alternativon por <nomo>.
+  --all                    voki --config por ĉiuj alternativoj.
+
+Komandoj:
+  -s|--split <dosiero> [<prefikso>] Disigi arkivon.
+  -j|--join <parto> <parto> ...     Kunmeti partojn.
+  -I|--info <parto> ...             Montrigi informon pri parto.
+  -a|--auto -o <kompletigi> <parto> Aŭtomate akumuli partojn.
+  -l|--listq                        Listigi malkongruintajn pecojn.
+  -d|--discard [<dosiernomo> ...]   Forlasi malkongruintajn pecojn.
+
+Komandoj:
+  [--add] <dosiero>        aldoni deturnon.
+  --remove <dosiero>       forigi la deturnojn.
+  --list [<glob-ŝablono>]  montri dosier-deturnojn.
+  --listpackage <dosiero>  montri pakon kiu deturnas la dosieron.
+  --truename <dosiero>     liveri la deturnitan dosieron.
+
+Komparaj operatoroj por --compare-versions estas:
+  lt le eq ne ge gt       (konsideri malplenan version kiel pli malnova ol iu ajn versio);
+  lt-nl le-nl ge-nl gt-nl (konsideri malplenan version kiel pli nova ol iu ajn versio);
+  < << <= = >= >> >       (nur por kongrueco al reg-dosiera sintakso).
+
+Akomoda dosiero '%s'
+Akomoda dosiero '%s' (fakte '%s')
+Akomodi iun ajn pakon kiu povas helpi tiun ĉiMalakomodado de %s (%s) ...
+Malakomodado de %s (%s), por ebligi forigon de %s (%s) ...
+Debiana %s petilo de pak-administra programo, versio %s.
+Debiana pako %s ekigila utilaĵo, versio %s.
+Debian %s versio %s.
+Debiana '%s' pak-arkiva bazprograma versio %s.
+Debian '%s', pak-administra programo versio %s.
+Debiana pako '%s' disig/kunmetiga ilo; versio %s.
+Ni forigis %s.
+Dependoj kaj konfliktojPriskriboDezirate=U-nekonate/Instali/foRigi/Purigi/H-teni
+| Stato=Ne/Inst/C-akmd-dosieroj/U-malpak/F-duon-akmd/H-duon-inst/W-ekigil-atend/T-ekigil-traktote
+|/ Err?=(nenio)/Reinst-postulate (Stato,Err: majuskle=malbone)
+Ne realigi sekurajn en/eligajn operaciojn dum malpakadoEraroj aperis dum procezado de:
+Elir-stato:
+  0 = Bone
+  1 = kun --auto, dosiero ne estas parto
+  2 = problemo
+La dosiero '%.250s' ne estas parto el plurparta arkivo.
+Formo-sintakso:
+  Formo estas ĉeno kiu estos eligita por ĉiu pako. La formo
+  povas inkluzivi la ordinarajn eskap-sekvojn \n (novlinio), \r (lini-
+  retroiro) aŭ \\ (simpla retroklinaĵo). Pak-informo povas esti inkluzivata
+  per enmeto de varieblaj referencoj al pak-kampoj uzante la sintakson ${var[;width]}
+  Kampoj estos dekstrigataj, krom se la larĝeco estos negativa: tiakondiĉe estos
+  uzata maldekstrigo.
+Ĝenerale helpa progres-informoNi preteratentas peton forigi kunhavatan deturnon '%s'.
+ni preteratentas peton renomigi dosieron '%s', posedata de deturna pako '%s'
+Informaro pri %d pako estis ĝisdatigata.
+Informaro pri %d pakoj estis ĝisdatigata.
+Freneza kvanto da sensencaĵojInstali pakon eĉ se ĝi malsukcesas aŭtentikan kontrolonInstali eĉ se ĝi rompus alian pakonInstalado de nova versio de akomoda dosiero %s ...
+Alvokado kaj stato de skriptoj de la pakzorgantoSenutilaj dosieroj restis en la proviz-dosierujo:
+Ni lasas '%s'
+Multe da dependeca/konflikta eligoMulte da sensencaĵoj pri ekz. la dosierujo dpkg/infoMulte da eligo por ĉiu akomoda dosieroMulte da eligo por ĉiu dosiero procezitaMulte la eligo pri ekigilojPli ol unu kopio de la pako %s estis elpakata
+ en tiu ĉi plenumo ! Ni akomodas ĝin nur unufoje.
+NomoNeniu deturno '%s', neniu forigita.
+Rim.: PATH por la ĉefuzanto ordinare devas enhavi /usr/local/sbin, /usr/sbin kaj /sbinNenio por akomodi.Oferi anstataŭigi akomod-dosierojn kiuj havas neniujn novajn versiojnElektebloj:
+  --admindir=<dosierujo>           Uzi <dosierujon> anstataŭ %s.
+  --by-package=<pako>              Preterpasi ekigil-atendanton (ordinare ŝaltite)
+                                     de dpkg).
+  --await                          La pako bezonas atendi la procezadon.
+  --no-await                       Neniu pako bezonas atendi la procezadon.
+  --no-act                         Simple testi - ne ŝanĝi ion ajn fakte.
+
+Elektebloj:
+  --depotdir <dosierujo>           Uzi <dosieron> anstataŭ %s/%s.
+  -S|--partsize <grandeco>         Laŭ KiB, por -s (apriore 450).
+  -o|--output <dosiero>            Dosiernomo, por -j (apriore estas
+                                     <pako>_<versio>_<ark>.deb).
+  -Q|--npquiet                     Silenti kiam -a ne estas parto.
+  --msdos                          Generi dosiernomojn laŭ la formo 8.3.
+
+Eligi por ĉiu akomoda dosieroEligi por ĉiu dosiero procezitaAnstataŭigi deturnitan dosieron per ne-deturnita versioAnstataŭigi dosieron de unu pako per aliaAnstataŭigi pak-dosierujon per tiu de alia dosieroPATH malhavas gravajn programojn, problemoj okazosPATH ne estas difinitaLa pako %s estas je tenado, ni ne tuŝas ĝin. Uzu --force-hold por preterpasi.
+La pako %s listiĝas pli ol unufoje, ni procezas nur unufoje.
+La pako '%s' ne enhavas iun ajn dosieron (!)
+Pakoj ankoraŭ ne remuntitaj:
+La parto %d de la pako %s malsukcesis (ankoraŭ volas Vojokampo Pre-DependsPreparado por anstataŭigi %s ...
+PrioritatoProcezi eĉ pakojn kun malĝusta aŭ neniu arkitekturoProcezi eĉ pakojn kun malĝustaj versiojProcezado de ekigiloj por %s (%s) ...
+Procezado estis haltata ĉar estis tro da eraroj.
+Purigado de akomodaj dosieroj por %s (%s) ...
+Kunmetado de la pako %s el %d parto: Kunmetado de la pako %s el %d partoj: Registrita informo pri %s el %s.
+Forigi esencan pakonForigi pakojn kiuj bezonas instaladoForigado de %s (%s) ...
+Forigado de '%s'
+Anstataŭigi pakon per pli malalta versioAnstataŭigita per dosieroj en la instalita pako %s (%s) ...
+Ni anstataŭigas disponeblan pak-informaron, uzante %s.
+Anstataŭigo de dosieroj en la malnova pako %s (%s) ...
+Elektado de la antaŭe neelektita pako %s.
+ElektoDifini ĉiujn perfortajn elekteblojnNi alĝustigas %s (%s) ...
+Stulta kvanto da eligo pri ekigilojNi preterlasas malvalidan linion: %sPreterpasi nekonatan alternativon %s.Preterpaso de neelektita pako %s.
+Disigado de la pako %s en %d parto: Disigado de la pako %s el %d partoj: StatoLa jenaj pakoj atendas procezadon de la ekigiloj kiujn ili aktivigis
+en aliaj pakoj.  Tiu procezado povas esti petata uzante dselect aŭ la
+komandon 'dpkg --configure --pending' (aŭ 'dpkg --triggers-only'):
+La jenaj pakoj estas malordigitaj pro gravaj problemoj okazintaj dum
+la instalo.  Ili devas esti reinstalataj por ke ili (kaj iu ajn pako
+kiu dependas je ili) funkciu ĝuste:
+La sekvaj pakoj malhavas la list-kontrolan dosieron en la 
+datumbanko, ili bezonas esti reinstalataj:
+La sekvaj pakoj malhavas la md5sums-kontrolan dosieron en la 
+datumbazo, ili bezonas esti reinstalataj:
+La jenaj pakoj estas nur duone akomoditaj, probable pro problemoj okazintaj
+dum ties unua akomodado.  La akomodado devus esti reprovita per la komando
+'dpkg --configure <pako>' aŭ per la akomoda menuero en dselect:
+La jenaj pakoj estas nur duone akomoditaj, pro problemoj okazintaj dum
+la akomodado.  La instalado probable povas esti kompletata per reprovo;
+la pakoj povas esti forigataj per dselect aŭ per 'dpkg --remove':
+La sekvaj pakoj ne havas arkitekturon:
+La sekvaj pakoj havas malvalidan arkitekturon:
+La sekvaj pakoj havas nekonatan fremdan arkitekturon, kiu kaŭzos
+dependecajn problemojn en ekster-interfaciloj. Tio ĉi povas esti riparata
+per registro de frenda arkitekuro kun dpkg --add-architecture:
+La jenaj pakoj estis ekigitaj, sed la ekigila procezado ankoraŭ
+ne estas plenumita.  Ekigila procezado povas esti petata uzante
+dselect aŭ 'dpkg --configure --pending' (aŭ 'dpkg --triggers-only'):
+La jenaj pakoj estas malpakitaj sed ankoraŭ ne akomoditaj.
+Ili devas esti akomodataj per 'dpkg --configure' aŭ per la
+akomoda menuero en dselect por ke ili funkciu:
+Estas %d elekto por la alternativo %s (provizanta %s).Estas %d elektoj por la alternativo %s (provizanta %s).Estas neniu programo kiu provizas %s.Estas nur unu alternativo en la ligo-grupo %s (provizanta %s): %sTio ĉi estas libera programaro; legu la Ĝeneralan Publikan Permeson de GNU versio 2 aŭ
+posta por kopi-kondiĉoj. Estas NENIU garantio.
+Aktivado kaj procezado de ekigiloProvi (mal)instali aferojn eĉ kiam ne ĉefuzantoIgi ĉiujn dependecajn problemojn al avertojIgi dependec-versiajn problemojn al avertojTajpu 'exit' kiam vi finos.
+Tajpu dpkg --help por helpo pri instalado kaj malinstalado de pakoj [*];
+Uzu 'apt' aŭ 'aptitude' por uzant-faciliga administrado de pakoj;
+Tajpu dpkg -Dhelp por listo de senerarigaj flag-valoroj de dpkg;
+Tajpu dpkg --force-help por listo de perfortigaj elektebloj;
+Tajpu dpkg-deb --help por helpo pri traktado de dosieroj *.deb;
+
+Elektebloj markitaj per [*] produktas multan eligon - duktu ĝin tra 'less' aŭ 'more' !Tajpu dpkg-deb --help por helpo pri traktado de dosieroj *.deb;
+Tajpu dpkg --help por helpo pri instalo kaj malinstalo de pakoj.Tajpu dpkg-split --help por helpo.Tajpu dpkg-trigger --help por helpo pri tiu ĉi utilaĵo.Elpakado de %s (%s) ...
+Elpakado de %s (%s) sur (%s) ...
+Ni ĝisdatigas disponeblan pak-informaron, uzante %s.
+Uzmaniero: %s [<elekteblo> ...] <komando>
+
+Uzu '%s --help' por havi informon pri uzo de la programo.Uzu 'apt' aŭ 'aptitude' por uzant-faciliga pak-administrado.
+Uzu --help por helpo pri deturnaj pakoj.Uzu --help por helpo pri preterpaso de dosier-stata informaro.Uzu --help por helpo pri postulantaj pakoj.Uzi la aprioran elekteblon por novaj akomod-dosieroj
+se iu estos disponigita, kaj ne demandi. Se neniu
+aprioraĵo povas esti trovata, vi estos demandata, nur
+ne, se unu el la elektebloj 'confold' aŭ 'confnew'
+ankaŭ estos provizitaVersioVersio de dpkg kun funkcianta subteno al %s ankoraŭ ne estas
+akomodita. Bonvolu uzi 'dpkg --configure dpkg', kaj poste reprovu.
+Dum aldonado, apriore estas --local kaj -divert <original>.distrib.
+Dum forigado, --package aŭ --local kaj --divert devas kongrui se indikite.
+Skriptoj preint/postrm de la pako devos ĉiam indiki --package kaj --divert.
+Forigus aŭ purigus %s  (%s) ...
+[implicite=n][implicite=Y][neniu implicitaĵo]'admindir' devas esti ene de 'instdir' por ke dpkg funkciu ĝusteni ankaŭ akomodas '%s' (postulata de '%s')la alternativo %s (parto de ligo-grupo %s) ne ekzistas; ni forigas el la listo de alternativojla alternativo %s ne povas esti mastra: ĝi estas sklavo de %sla alternativo %s ne povas esti sklavo de %s: ĝi estas mastra alternativola alternativo %s ne povas esti sklavo de %s: ĝi estas sklavo de %sla alternativo %s por %s ne estas registrita; ni ne forigasla alternativo %s por %s ne estas registrita; ni ne difinas ĝinla alternativa ligo %s jam estas zorgata de %sla alternativa ligo %s jam estas zorgata de %s (sklavo de %s)la alternativa ligo ne estas absoluta kiel ĝi devus esti: %salternativa nomo (%s) ne devas enhavi '/' kaj spacojnla alternativa vojo ne estas absoluta kiel ĝi devus esti: %sdusenca pak-nomo '%s' kun pli ol unu instalita specimenoPreterpaso por '%s' jam ekzistas, sed --force estas specifita, do ĝi estos preteratentitapreterpaso por '%s' jam ekzistas; ni ĉesigasiu ajn deturno de %siu ajn deturno de %s al %smembro-nomo '%s' de ar estas tro longamembro-grando %jd de ar estas tro larĝa<vaka><nenio><nekonata>arkitekturo '%s' malvalidas: %sarkitekturo '%s' estas rezervita kaj ne povas esti aldonatala arkivo '%.250s' enhavas du regadajn membrojn, ni rezignasla arĥivo '%s' enhavas tro fruan membron '%.*s' antaŭ '%s', ni rezignasla arĥivo '%s' uzas nekonatan densigon por membro '%.*s', ni rezignasarkivo enhavis objekton '%.255s' el nekonata tipo 0x%xgrando de arkiv-regada membrola arkivo havas nevalidan formo-version: %sla arkivo havas misformitan grandon de regada membro '%s'la arkivo havas neniun novlinion en la datumkapomembro de arkiv-informa kapola arkivo havas formo-version %d.%d; akiru pli novan dpkg-debmagia versi-numero de arkivokapo de arkiva membroarkivaj part-numerojarkiva part-deŝovonumero de arkiv-partojarkiva totala grandoaŭtomata reĝimoaŭtomataj ĝisdatigoj de %s/%s estas malaktivitaj; ni lasas ĝin solani atendas ke alia pako procezu ekigilojnmalplena linio en valoro de kampo '%.*s'disrompita pro malsukceso de forigo aŭ de instalodisrompita pro malsukceso de 'postinst'ni ne povas instali la nekonatan elekton %sne eblas apliki 'mmap' je paka inform-dosiero '%.255s'ne eblas forigi malnovan skripton postrmne eblas legi staton de paka inform-dosiero '%.255s'ne eblas postmeti membro-dosieron de ar (%s) al '%s': %sne eblas postmeti apartitan pak-parton '%s' al '%s': %sne eblas postmeti al '%s'ne eblas fermi malkompaktilan duktonne eblas komputi haketon MD5 por la dosiero '%s': %sne eblas komputi haketadon MD5 por dosiero tar '%.255s': %sne eblas konverti multbajtan sekvaĵon '%s' al larĝsignone eblas konverti multbajtan ĉenon '%s' al larĝsigna ĉenone eblas kopii '%s' al la arkivo '%s': %sne eblas kopii '%s' al '%s': %sne eblas kopii arkivan membron el '%s' por malkompaktila dukto: %sne eblas kopii eltiritan datumaron por '%.255s' al '%.255s': %sne eblas deturni dosierujojnNe eblas deturni dosieron '%s' al si memne eblas elpreni regadan dosieron '%s' el '%s': %sne eblas elpreni disigitan pak-parton '%s': %sne eblas preni sekurec-etikedigan traktilonne eblas malfermi '%.255s' (en '%.255s')ne eblas malfermi la arkiv-partan dosieron '%.250s'ne eblas malfemi sekurec-statan avertan kanalonne povas legi informan dosierujonne eblas forigi '%.250s'ne eblas forigi arkitekturon '%s', nune uzata de datumbazone eblas forigi ne-frendam arkitekturo '%s'ne eblas forigi la malnovan sekurkopian akomodo-dosieron '%.250s' (de '%.250s')ne eblas forigi la malnovan akomodan dosieron '%.250s' (= '%.250s')ne eblas forigi malnovan dosier-listonne eblas renomigi '%s' al '%s'ni ne sukcesas solvi antaŭdependecojn por %.250s (postulata de %.250s)ne povas skani la dosierujon '%.255s'ne eblas skani la ĝisdatigan dosierujon '%.255s'ni ne sukcesas solvi antaŭdependecon:
+ %sne eblas difini sekurecan kuntekston por la dosierobjekto '%s'ne eblas difini sekurec-plenuman kuntekston por la skripto de pakzorgantoni eblas preterpasi arkiv-regadan membron el '%s': %sne eblas preterpasi arkivan membron el '%s': %sne eblas preterpasi dosieron '%.255s' (anstataŭite aŭ forigite?) el dukto: %sne eblas preterpasi ŝtopadon por dosiero '%.255s': %sne eblas preterpasi apartitan pak-kapon por '%s': %sne eblas legi la staton de '%.255s' (en '%.255s')ne eblas 'stat' la dosieron '%s'ne eblas forigi eblajn vostajn nulojn el dpkg-deb: %ssigno '%c' ne estas permesate (nur literoj, ciferoj kaj signoj '%s')kompaktita datumaro estas difektitaconffile '%.250s' ne aperas en la pakoconffile '%.250s' ne stat-legeblasconffile '%s' ne estas ordinara dosierorigardilo de malsamoj en conffilela nomo de conffile '%s' enhavas vostajn blankajn spacojnnomo de conffile '%s' estas duobligitala nomo de conffile '%s...' tro longas, aŭ malhavas finan novlinionŝelo de conffileagorda eraro: %s:%d: %skonfliktantaj agoj -%c (--%s) kaj -%c (--%s)konfliktantaj diversions envolvantaj '%.250s' aŭ '%.250s'konfliktantaj pakoj - ni ne instalos %.250sni konsideras malakomodadon de %s, kiu estus rompita de %s ...ni konsideras malakomodadon de la esenca
+ pako %s, por ebligi %sni konsideras forigi %s favore al %s ...reg-dosierujo havas malĝustajn permesojn %03lo (devas esti >=0755 kaj <=0775)reg-dosierujo ne estas dosierujola reg-dosiero '%s' ne ekzistasreg-dosiero '%s' por la pako '%s' enhavas malplenan dosiernomonreg-dosiero '%s' por la pako '%s' malhavas lastan linifinaĵonreg-dosiero enhavas %cregada membrorompita inform-datumbaza dosier-formo '%s'ne eblis malfermi la protokolon '%s': %sne eblis legi la staton de la malnova dosiero '%.250s', do ni forigas ĝin: %sne eblis malfermi '%i' por elsendfluonuna alternativo %s estas nekonata, ni ŝanĝas al %s por ligo-grupo %sciklo estis trovata dum procezado de ekigiloj:
+ ĉeno da pakoj kies ekigiloj estas aŭ povas esti respondecaj:datumara membrodependecaj problemoj - ni lasas la ekigilojn neprocezitajdependecaj problemoj - ni lasas malakomoditedependecaj problemoj - ni ne forigasdependecaj problemoj malebligas akomodadon de %s:
+%sdependecaj problemoj malebligas procezi ekigilojn por %s:
+%sdependecaj problemoj malebligas forigon de %s:
+%sforlaso de la malaktuala sklav-ligo %s (%s)deturno de %s el: %s
+deturno de %s al: %s
+deturno de %s pro %sdeturno de %s al %s pro %sdeturni-al ne povas enhavi novlini-signojndeturnita de %s al: %s
+farite
+ni retroigas %.250s de %.250s al %.250sdpkg ne estas registrita kiel instalitan, ne eblas kontroli subtenon al %s!
+ripetita atendata ekiga pako '%.255s'ripetita dosiera ekigil-intereso por dosiernomo '%.250s' kaj pako '%.250s'duobligita vojo %sripetita pritraktota ekigilo '%.255s'duobligita sklav-ligo %sduobligita sklav-nomo %sripetita valoro por kampo '%s'ripetita valoro por la kampo difinita de uzanto '%.*s'vaka kampnomomalplenaj ĉenoj el fgets dum legado de dosieroj conffilemalplenaj ekigilo-nomoj ne estas permesatajepokoepoko en versio estas negativaepoko en versio ne estas numeroepoko en versio estas tro grandaeraroeraro dum kontrolo de '%s'eraro dum fermo de %.250seraro dum fermo de agordo-dosiero '%.255s'eraro dum fermo/skribo de '%.255s'eraro dum kreo de aparato '%.255s'eraro dum kreo de la dosierujo '%.255s'eraro dum kreo de rekta ligilo '%.255s'eraro dum kreo de nova sekurkopia dosiero '%s'eraro dum kreo de dukto '%.255s'eraro dum kreo de simbola ligilo '%.255s'eraro dum certigo ke '%.250s' ne ekzistaseraro dum rulado de hoko '%s', elir-kodo %deraro dum formado de ĉeno enen de variablo varbuferaro en la montro-formo: %seraro dum instalado de nova dosiero '%s'Eraro dum malfermado de dosiero conffileseraro dum malfermo de agordo-dosierujo '%s'eraro dum procezado de la arĥivo %s (--%s):
+ %seraro dum procezado de la pako %s (--%s):
+ %seraro dum legado de %.250seraro dum legado de %s el la dosiero %.255seraro dum legado de dosiero conffileseraro dum legado el dukto de dpkg-deberaro dum lego de dosiero prokrastita de ekigiloj '%.250s'eraro dum forigo de malnova sekurkopian dosieron '%s'eraro dum difino de posedo de '%.255s'eraro dum difino de posedo de simbola ligilo '%.255s'eraro dum difino de permesoj de '%.255s'eraro dum difino de horstampoj de '%.255s'eraro dum provo malfermi %.250seraro dum malkaptado de la signalo %s: %s
+eraro dum skribado de '%s'eraro dum skribo de '%s'eraro dum skribado al '%s'eraro dum skribado al arkitektura listoeraro dum skribo al stderr, malkovrita antaŭ ol komandinvito de conffilemalsukceso dum provo rezervi memoronmalsukceso dum rezervo de memoro por nova ero en listo de malsukcesintaj pakoj: %smalsukcesis per chdir al: '%.255s'malsukceso dum atingo al dosierujomalsukceso por apliki 'chroot' al '%.250s'malsukceso dum malfermo post lego: '%.255s'malsukceso dum kreo de dosierujomalsukceso dum kreo de duktomalsukceso de 'dup' por fd %dmalsukceso de 'dup' por std%smalsukcesis apliki fstat al membro-dosiero de ar (%s)malsukceso dum apliko de fstat al arkivomalsukcesis uzi 'fstat' je dosiero diversionsmalsukcesis uzi fstat je dosiero 'statoverride'malsukceso dum kreo de provizora dosiero (%s)malsukceso dum malfermo de agordo-dosiero '%.255s' por legi: %smalsukcesis malfermi dosieron diversionsmalsukceso dum malfermo de paka inform-dosiero '%.255s' por legimalsukcesis malfermi dosieron 'statoverride'malsukceso dum malfermo de listdosiero de ekigil-intereso '%.250s'malsukceso dum legadomalsukceso dum lego de '%.255s' (en '%.255s')malsukceso dum lego de la arkivo '%.255s'malsukcesis forigi enkorpigitan ĝisdatigan dosieron %.255smalsukcesis forigi mian propran ĝisdatigan dosieron %.255smalsukceso dum retroigo de provizora dosiero (%s)malsukceso dum retroigo de dosiero de ekigil-intereso '%.250s'malsukcesis uzi 'seek'malsukcesis legi staton (dereference) de ekzistanta symlink '%.250s'malsukcesis legi staton (dereference) de proponita nova celo de symlink '%.250s' por symlink '%.250s'malsukcesis apliki fstat al provizora dosiero (%s)malsukceso dum forligo de provizora dosiero (%s), %smalsukceso dum skribadomalsukcesis skribi datumbazan registron %s je '%.50s' al '%.250s'malsukcesis skribi la detalojn de '%.50s' al '%.250s'malsukceso dum skribo de dosiernomo al dukto de tar (%s)fgets liveris malplenan ĉenon el '%.250s'kampnomo '%.*s' ne povas komenci per streketokampo nomo '%.*s' devas esti sekvata de dupunktokampo laĝeco estas for de intervalola dosiero '%.250s' havas malvalidan formo-version: %sla dosiero '%.250s' fuŝas - %.250s mankasla dosiero '%.250s' fuŝas - malĝusta MD5-kontrolsumo '%.250s'la dosiero '%.250s' fuŝas - malĝusta arkiv-kapa magiola dosiero '%.250s' fuŝas - neniu numero de arkiv-partola dosiero '%.250s' fuŝas - malĝusta cifero (kodo %d) en %sla dosiero '%.250s' estas disrompita - malĝusta magiaĵo ĉe fino de la unua datumkapola dosiero '%.250s' fuŝas - malĝusta magiaĵo ĉe fino de dua datumkapola dosiero '%.250s' fuŝas - malĝusta nombro da arkivaj partojla dosiero '%.250s' fuŝas - malĝusta ŝtopsigno (kodo %d)la dosiero '%.250s' fuŝas - mankas novlinion post %.250sla dosiero '%.250s' fuŝas - neniu oblikvo inter arkivaj part-numerojla dosiero '%.250s' fuŝas - nuloj en informo-sekciola dosiero '%.250s' fuŝas - dua membro ne estas datumaro-membrola dosiero '%.250s' fuŝas - grandeco estas malkorekta por limigita part-numerola dosiero '%.250s' fuŝas - tro malgrandala dosiero '%.250s' fuŝas - malkorekta nombro da partoj por limigitaj grandecojla dosiero '%.250s' estas laŭ form-versio %d.%d; akiru pli novan dpkg-splitla dosiero '%.250s' ne estas arkiv-partola dosiero '%s' fuŝas; entjero for de intervalo en %sla dosiero '%s' ne estas arkiv-parto
+dosierformo ne estis rekonatala dosiero ŝajne povus esti arkivo kiu estis
+ misrompigita pro elŝuto laŭ reĝimo ASCIIdosiero ne povas enhavi novlini-signojndosier-ekigila registraĵo aludas malpermesatan pak-nomon '%.250s' (por intereso en la dosiero '%.250s'): %.250sla dosiernomo "%s" ne estas absolutala dosieroj '%.250s' kaj '%.250s' ne estas partoj de la sama dosierodosier-lista dosiero por la pako '%.250s' enhavas malplenan dosiernomondosier-lista dosiero por la pako '%.250s' malhavas lastan linifinaĵondosier-lista dosiero por la pako '%.250s' mankas; ni konjektas ke la pako havas neniun dosieron aktuale instalitani devigas reinstalon de la alternativo %s ĉar la ligo-grupo %s estas rompitadisbranĉigo malsukcesisformo-versio sekvata de rubaĵoformo-versio ne havas punktonversi-numero de formoformo-versio kun malplena maĵora komponantoformo-versio kun malplena minora komponantoni kreis rompitan kaplinion ar por '%s'datumkapo estas tro longa, igante parton tro longa; la paka nomo aŭ versi-
+numeroj devas esti eksterordinare longaj, aŭ simile; ni rezignaspreteratentas %d averton pri la reg-dosiero(j)preteratentas %d avertojn pri la reg-dosiero(j)ni preteratentas rompaĵon, eblas daŭrigi tamen!ni preteratentas konflikton, eblas daŭrigi tamen!ni preteratentas dependecan problemon kun %s:
+%spreteratento de dependeca problemo!ni preteratentas peton forigi %.250s, kiu ne estas instalitani preteratentas peton forigi %.250s, nur kies akomodaj
+ dosieroj estas en la sistemo; uzu --purge por forigi ankaŭ ilinmalvalida arkitektur-nomo en specifilo '%s:%s': %smalvalida atendata pak-nomo '%.250s': %.250smalvalida pak-nomo ĉe linio %d: %.250smalvalida pak-nomo en atendata ekigilo '%.255s': %smalvalida pak-nomo en specifilo '%s%s%s': %smalvalida nomo de pritraktota ekigilo '%.255s': %sinfo-datumbaza formo (%d) estas falsa aŭ tro nova; provu havigi novan dpkginform-dosiero %s/%s ne asociata al iu ajn pakoinstalo de %.250sinstalitainstalado de %.250s povus rompi %.250s, kaj
+ malakomodado ne estas permesata (--auto-deconfigure povus helpi)instalado de %.250s rompus ekzistantan programaroninterna eraro (miso)malvalida signo '%c' en arkivo '%.250s' membro '%.16s' grandomalvalida signo '%c' en kampo larĝecomalvalida signo en revizi-numeromalvalida signo en versi-numeromalvalida densig-nivelo por -%c: %ldmalvalida densigilaj atributoj: %smalvalida deb-forma versio: %smalvalida entjero por -%c: '%.250s'malvalida entjero por --%s: '%.250s'malvalida aŭ nekonata sintakso en ekigilo-nomo '%.250s' (en ekigilaj interesoj por la pako '%.250s')malvalida paknomo '%.250s' en ekigiloj prokrastigis la dosieron '%.250s'malvalida statomalvalida ekigila nomo '%.250s': %.250slinio ne finigita dum provo legi %slinio tro longa aŭ ne finigita dum provo legi %sla ligo %s estas kaj mastra kaj sklavaloka deturno el: %s
+loka deturno de: %sloka deturno de: %s al %sloka deturno al: %s
+loke deturnite al: %s
+longaj dosiernomojla pakzorgant-skripto '%.50s' havas malĝustajn permesojn %03lo (devas esti >=0555 kaj <=0775)la pakzorgant-skripto '%.50s' ne estas ordinara dosiero aŭ simbola ligola pakzorgant-skripto '%.50s' ne estas 'stat'-legeblamalloc malsukcesis (%zu bajtoj)permana reĝimomastra dosieromastra ligoeble okazos problemo forigante %s, ĉar ĝi provizas %s ...ne povas esti malplena ĉenomemor-uzada limo estis atingatamalkongruo je deturni-al
+  dum forigo de '%s'
+  trovite '%s'malkongruo je pako
+  dum forigo de '%s'
+  trovite '%s'mankas ferma kuniga krampomiksitaj ne-kuninstaleblaj kaj kuninstaleblaj pak-specimenoj aperas; plej probable pro ĝisdatigo el neoficiala dpkgplur-arkitekturamultoblaj Konfliktoj kaj Anstataŭojmultopaj ne-kuninstaleblaj pak-specimenoj aperas; plej probable pro ĝisdatigo el neoficiala dpkgmultoblaj 'statoverride' ĉeestas por la dosiero '%.250s'devas esti lanĉata el skripto de pakzorganto (aŭ kun elekteblo --by-package)devas komenciĝi per alfanumera signodevas komenciĝi per alfanumera signola nomo %s estas kaj mastra kaj sklavabezonas agan elekteblonlini-fina signo en kampo nomo '%.*s'novlinioj malpermesite en dosieroj update-alternatives (%s)neniu alternativo por %sneniu preterpaso ĉeestasneniu pak-infomo en '%.255s'neniu pako nomata '%s' estas instalita, ni ne povas akomodineniu pako kongruanta al %s estis trovataneniu pako kongruanta al la ŝablono %sne, %s estas esenca, ĝi ne estos malakomodata
+ por ebligi %sne, ne eblas daŭrigi kun %s (--auto-deconfigure helpos):
+%sni ne kontrolas la enhavon de regada areone instalitane instalita sed restas akomodojni ne anstataŭigas %s ĉar ĝi ne estas simbola ligoni ne anstataŭigas %s per ligonenio post dupunkto en versi-numeronula pak-nomo en --%s komo-apartita listo '%.250s'nombro da arkivaj partojmalaktuala elekteblo '--%s'; ne disponeblaj pakoj estas aŭtomate forviŝatajla malnova conffile '%.250s' estis malplena dosierujo (kaj nun estas forigita)la malnova dosiero '%.250s' estas la sama ol pluraj novaj dosieroj! (kaj '%.250s' kaj '%.250s')malnova versio de pako havas tro longan informan dosiernomon kiu startas je '%.250s'nur ekzaktaj versioj povas esti uzataj por la kampo '%s'malfermi elementon '%.255s' (en %.255s) malsukcesis neatenditemankas memoro por nova puriga enigaĵomankas memoro por nova puriga enigaĵo kun multaj argumentojmankas memoro por nova erar-kuntekstopreterpaso de problemo ĉar --force ebligis:la pako %.250s jam estas instalita kaj akomoditala pako %.250s ne estas preta por akomodo
+ ni ne povas akomodi (nuna stato '%.250s')la pako %.250s ne pretas por procezado de ekigiloj
+ (nuna stato '%.250s' kun neniu pritraktota ekigilo)la pako %s %s ne povas esti akomodata ĉar %s estas je malsama versio (%s)la pako %s ne povas esti akomodata ĉar %s ne estas preta (nuna stato '%s')la pako %s enhavis liston kiel inform-dosieronla pako %s postulas reinstalon, sed eĉ tiel ni forigos ĝin laŭ via petola pako %s postulas reinstalon, ni ne forigos ĝinla pako %s estis je tenado, ni tamen procezas ĝin, laŭ via petola pako '%s' ne disponeblasla pako '%s' ne estas instalitala pako '%s' ne estas instalita kaj neniu informo disponeblaspak-arkitekturola pak-arkitekturo (%s) ne kongruas al la sistemo (%s)la pako enhavas tro longan reg-informan dosiernomon (kiu startas je '%.50s')la pak-rega informo enhavis la dosierujon '%.250s'rmdir de '%.250s' per pak-rega informo ne diris ke ne estas dosierujoeltirado de informo pri reg-informarola pako deturnas aliajn al: %s
+elpreno de pak-kampa valoropak-dosiera kontrolsumo MD5eltirado de paka dosiersistema arkivopako havas staton %s sed ekigiloj estas atendatajpako havas staton %s sed ankoraŭ estas ekigiloj pritraktotajla pako estas en tre aĉa nekohera stato; vi devos
+ reinstali ĝin antaŭ ol provi forigonla pako estas en tre aĉa malkohera stato; vi devos
+ reinstali ĝin antaŭ ol provi akomodadonpako ne povas enhavi novlini-signojnpak-nomopak-nomo havas signojn kiuj ne estas minusklaj alfanumeroj aŭ '-+.'kontrolo de pak-subskriboversi-numero de pakomankas la parto %dla part-dosiero '%.250s' ne estas ordinara dosieropart-grandeco estas tro granda aŭ ĝi ne estas pozitivaparto-grandeco devas esti minimume %d KiB (por ebligi datumkapon)pasis
+algluivojo ne povas enhavi novlini-signojnantaŭdependeca problemo - ni ne instalos %.250sprioritatoprioritato estas for de intervaloprioritato devas esti entjeroprioritato de %s estas for de intervalo: %sprioritato de %s: %sleg-eraro en %.250sleg-eraro en '%.250s'leg-eraro en agorda dosiero '%.255s'leg-eraro en la norma enigoleg-eraro en stdin ĉe komandinvito de conffilelegado de paka inform-dosiero '%.255s'legado de paka inform-dosiero '%s': %slegado de dosiero 'statoverride' '%.250s're-kunmetita pak-dosieropri %s, kiu enhavas %s, antaŭdependeca problemo:
+%sprizorgo de %s enhavanta %s:
+%sforigo de %.250sforigado de arkitekturo '%s', nune uzata de datumbazopermana forigado de elektita alternativo - ni ŝaltas %s al aŭtomata reĝimorenomigo implicas anstataŭigon de '%s' per
+  malsama dosiero '%s', ne permesiterenomigi: forigi duobligitan malnovan ligon '%s'la petita operacio postulas privilegion de superuzantokomando rm por purigadoni serĉis, sed trovis neniun pakon (dosierojn kongruantajn al *.deb)<nekonata>preparado de aŭtomata elekto de %spluraj pak-informaj enmetaĵoj estis trovitaj, nur unu estas permesateŝela komando por movi dosierojnpreterpasi kreon de %s ĉar la koncerna dosiero %s (de ligo-grupo %s) ne ekzistassklava dosierosklava ligosklava ligo samas ol la ĉefa ligo %ssklava nomola font-dosiero '%.250s' ne estas purteksta dosieroremunto de disigita pakodosiero 'statoverride' enhavas malplenan liniondosiero 'statoverride' malhavas lastan linifinaĵonstatostat-registriloapartigado de vosta /subprocezo %s liveris eraran elir-staton %dgrando de simbola ligo '%.250s' ŝanĝis de %jd al %zdsintaksa eraro en dosier-ekigila dosiero '%.250s'sintaks-eraro en dosiero 'statoverride'prenas unu argumenton, la ekigil-nomonla celo estas dosierujo - ni ne povas preterpasi reg-dosieran kontrolonekzistas diversaj versioj el la parto %d - minimume '%.250s' kaj '%.250s'estas neniu skripto en la nova versio de la pako - ni rezignastio ĉi estas esenca pako; ĝi ne devos esti forigitapor retroiri al aŭtomataj ĝisdatigoj, uzu '%s --auto %s'tro multaj eraroj, ni ĉesastro longa linio aŭ mankas novlinia signo en '%.250s'sintaksa eraro en dosiero de ekigil-intereso '%.250s'; malpermesata pak-nomo '%.250s': %.250sekigilo-nomo enhavas malvalidan signonekigilaj registraĵoj ankoraŭ ne ekzistasekigitaekigila ci-dosiero '%.250s' enhavas malpermesata ekigila sintakso en ekigila nomo '%.250s': %.250sekigil-ci-dosiero enhavas nekonatan gvidlinion '%.250s'ekigil-ci-dosiero enhavas nekonatan sintakson de gvidliniojdatumara dosierujo de ekigiloj ankoraŭ ne estas kreitajekigiloj iteraciadas, ni forlasasni provas skripton el la nova pako anstataŭe ...provo anstataŭigi '%.250s', kiu ankaŭ estas en la pako %.250s %.250sprovo anstataŭigi '%.250s', kiu estas la deturnita versio de '%.250s'provo anstataŭigi '%.250s', kiu estas la deturnita versio de '%.250s' (pako: %.100s)provo anstataŭigi la dosierujon '%.250s' en la pako %.250s %.250s kun ne-dosierujoprovo anstataŭigi kunhavatan '%.250s', kiu estas malsama ol aliaj specimenoj de la pako %.250sdu komandoj specifitaj: --%s kaj --%sne eblas (re)malfermi la enigan part-dosieron '%.250s'ne eblas ŝanĝi posedon de cel-dosiero '%.250s'ne eblas kontroli ekziston de '%.250s'ne eblas kontroli ŝloso-staton de dosiero '%s'ne eblas kontroli ekziston de la arkivo '%.250s'ne eblas uzi 'chwon' je sekurkopia simbola ligilo por '%.255s'ne eblas purigi malordon ĉirkaŭ '%.255s' antaŭ ol instali alian versionne eblas fermi dosieron '%s'ne eblas fermi novan dosieron '%.250s'ne eblas fermi novan dosieron prokrastitan de ekigiloj '%.250s'ne eblas fermi la ĝisdatigitan staton de '%.250s'ne eblas krei '%.255s'ne eblas krei '%.255s' (dum procezado de '%.255s')ne eblas krei dosieron '%s'ne eblas krei novan dosieron '%.250s'malsukceso dum kreo de provizora dosierujone eblas krei ekigil-statan dosierujon '%.250s'ne eblas forigi la reg-informan dosieron '%.250s'ne eblas forigi la malnovan dosierujon '%.250s': %sne eblas forigi la eluzitan proviz-dosieron '%.250s'ne eblas forĵeti '%.250s'ne eblas lanĉi %s (%s)ne eblas plenigi %.250s per ŝtopadone eblas elbufrigi %.250s post ŝtopadone eblas elbufrigi dosieron '%s'ne eblas elbufrigi novan dosieron '%.250s'ne eblas elbufrigi la ĝisdatigitan staton de '%.250s'ne eblas legi staton de font-dosierone eblas apliki 'fsync' al la ĝisdatigitan staton de '%.250s'ne eblas legi dosier-priskribilon (fd) por la dosierujo '%s'ne eblas preteratenti la signalon %s antaŭ ol plenumi %.250sne eblas instali '%.250s' kiel '%.250s'ne eblas instali la (supoze) novan inform-dosieron '%.250s'ne eblas instali novan inform-dosieron '%.250s' kiel '%.250s'ne eblas instali novan dosieron prokrastitan de ekigiloj '%.250s'ne eblas instali novan version de '%.255s'ne eblas instali la ĝisdatigitan staton de '%.250s'ne eblas ŝlosi %sne eblas fari sekurkopian ligilon de '%.255s' antaŭ ol instali novan versionne eblas fari sekurkopian simbolan ligilon por '%.255s'ne eblas puŝi aparte '%.255s' por instali novan versionne eblas malfermi '%.255s'ne eblas malfermi la dosierujon '%s'ne eblas malfermi la dosieron '%s'ne eblas malfermi novan proviz-dosieron '%.250s'ne eblas malfermi la elig-dosieron '%.250s'ne eblas malfermi la font-dosieron '%.250s'ne eblas malfermi provizoran reg-dosierujonne eblas malfermi ekigil-ci-dosieron '%.250s'ne eblas malfermi dosieron prokrastitan de ekigiloj '%.250s'ne eblas malfermi/krei novan dosieron prokrastitan de ekigiloj '%.250s'ne eblas legi la proviz-dosierujon '%.250s'ne eblas legi dosier-ekigilan dosieron '%.250s'ne eblas legi dosier-priskribajn (fd) flagojn por %.250sne eblas legi ligilon '%.255s'ne eblas legi la part-dosieron '%.250s'ne eblas forigi '%s'ne eblas forigi serkurkopion de '%.250s'ne eblas forigi kopiitan kodumo-dosieron '%s'ne eblas forigi nove eltiritan version de '%.250s'ne eblas forigi nove instalitan version de '%.250s'ne eblas forigi nove instalitan version de '%.250s' por ebligi reinstalon de sekurkopione eblas forigi malaktualan inform-dosieron '%.250s'ne eblas renomigi la novan proviz-dosieron '%.250s' al '%.250s'ne eblas remalfermi la part-dosieron '%.250s'ne eblas restarigi serkurkopian version de '%.250s'ne eblas sekure forigi '%.250s'ne eblas sekure forigi '%.255s'ne eblas sekure forigi la malnovan dosieron '%.250s': %sne eblas retroiri al la komenco de %.250s post ŝtopadone eblas ŝalti bufradon por datumbaza dosiero %sne eblas ŝalti flagojn 'close-on-exec' (fermi-je-plenumo) por %.250sne eblas difini plenum-permesojn por '%.250s'ne eblas difini reĝimon de cel-dosiero '%.250s'ne eblas uzi 'setenv' por la skripto de pakzorgantone eblas uzi 'setenv' por subprocezojne eblas legi staton de %s '%.250s'ne eblas legi staton de %s '%.250s': %sne eblas legi staton de '%.250s'ne eblas legi staton de reg-dosierujone eblas legi staton de la nune instalita conffile '%.250s'ne eblas 'stat' novan disigitan conffile '%.250s'ne eblas legi staton de alia nova dosiero '%.250s'ne eblas legi staton de la restarigita '%.255s' antaŭ ol instali alian versionne eblas 'stat' la font-dosieron '%.250s'ne eblas legi staton de dosiero prokrastita de ekigiloj '%.250s'ne eblas sinkronigi la dosierujon '%s'ne eblas sinkronigi dosieron '%.255s'ne eblas sinkronigi dosieron '%s'ne eblas sinkronigi novan dosieron '%.250s'ne eblas distranĉi la ĝisdatigitan staton de '%.250s'ne eblas malŝlosi %sne eblas skribi dosieron '%s'ne eblas skribi novan dosieron '%.250s'ne eblas skribi novan dosieron prokrastitan de ekigiloj '%.250s'ne eblas skribi al stata fd %dne eblas skribi ĝisdatigitan staton de '%.250s'ne spegulitaj citiloj en '%s'neatendita eraro de bzip2neatendata datumaro post pako kaj elekto ĉe linio %dneatendita dosierfino en %s en %.255sneatendita fino de dosiero aŭ fluoneatendita dosierfino dum provo legi %sneatendita fino de dosieroneatendata linifino post pak-nomo ĉe linio %dneatendata linifino en pak-nomo ĉe linio %dneatendata linifinon en dosiero 'statoverride'nekonata argumento '%s'nekonata kompaktiga strategionekonata densig-strategio '%s'!nekonata densig-tipo '%s'!nekonata deb-forma versio: %snekonata perforta/rifuza elekteblo '%.*s'nekonata elekteblo '%s'nekonata elekteblo -%cnekonata elekteblo --%snekonata kontrola elig-formo '%s'nekonata stato de dezirataĵo ĉe linio %d: %.250smalpakita sed ne akomoditenesubtenata kompaktiga antaŭagordonesubtenata densig-tipo '%s' kun unuforma densigonesubtenataj elektebloj en dosierkaponesubtenata tipo de integreca kontroloĝisdatiga dosierujo enhavas la dosieron '%.250s', kies nomo estas tro longa (longeco=%d, maks=%d)ĝisdatiga dosierujo enhavas dosierojn kun malsamaj longecoj de nomoj (kaj %d kaj %d)ni ĝisdatigas la alternativon %s ĉar la ligo-grupo %s ŝanĝis sklav-ligojnkamp-nomo difinita de uzanto '%.*s' tro mallongani uzas %s por provizi %s (%s) en aŭtomata reĝimoni uzas %s por provizi %s (%s) en malaŭtomata reĝimovaloro por la kampo '%s' havas misformitan linion '%.*s'valoro por la kampo '%s' ne estas permesata en tiu ĉi kuntekstokontrolado je pako %s malsukcesis!kontrolado je pako %s malsukcesis; sed ni instalas eĉ tiel, laŭ via peto<nenio>versio %.250s de %.250s jam estas instalita, ni preterpasasversi-numero ne komenciĝas per ciferoversi-ĉeno havas enigitajn spacojnversi-ĉeno estas malplena'Provides' kun versioatendo je subprocezo %s malsukcesisavertodum legado de %s: %sdum forigo de %.250s, la dosierujo '%.250s' ne malplenis, do ĝi restisdum forigo de %.250s, maleblis forigi la dosierujon '%.250s': %s - ĉu la dosierujo povus esti munt-punkto?Ni ne retroigos %.250s de %.250s al %.250s, ni preterpasasjes, ni malakomodos %s (rompita de %s)jes, ni forigos %s favore al %svi devas indiki pakojn per iliaj propraj nomoj, ne per citado de la nomoj de la dosieroj en kiuj ili venas
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/es.gmo dpkg-1.20.7.1/po/es.gmo
--- dpkg-1.20.7.1-orig/po/es.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/es.gmo	2021-06-09 18:25:14.660502979 -0500
@@ -0,0 +1,859 @@
+��, ]<@�U?�Ua�UkSV��V��W&X=/X&mX�X-�Y.�YZ.ZEZ aZ4�Z�Z5�Z-	[.7[0f[1�[$�[4�[/#\S\qk\(�\$]+]K]:k]6�]1�]1^!A^2c^(�^�^�^!�^_#_A_R_.a_�_S�_�_` `98`mr`)�`:
+a9Ea.a'�a&�a�a3b5Gb}b�bP�b\�bv>c[�cUdgd|d�d�d�dZ�de*e�9e=fCfXf-if+�f�f)�fgg�/g=iRIi1�iD�iLjA`j'�j&�j(�j'k+Bk4nk!�k,�k9�k-,lZl#xl�l$�l�l"�l m!>m#`m�m�m�m�m�m"�m2n1Kn/}n'�n�n.�no-6oRdoH�oQpARpe�pf�pIaq7�q<�q r(3rB\r�r�r�r
�r �rs5,s1bs@�s0�stt#1t!Utwt�tK�t7�t55u-ku�u!�u�u'�u-v-Ev sv5�v�v �vw"#w!Fw"hw!�w$�w,�w.�w..x.]x�xH�x6�x(,y>Uy$�y �y�y�yzz�$z�z�z#�z:{-P|~|�|�|�|*�|<�|#'}-K}-y}��}<~I~5`~��~[���g�
K�Y�q�(��-���8��<6�.s���0��3�1�P�]�x����09�1j�*��JǊ2��E�&�2�ED�V���5��.0�-_�+��/��
�%��/�*M�&x�!��+��B�]0���!��M���2��L����!��"��՘4��.)�5X�3��Gҙ8�,S���(��Ț͚ߚG��C�3L�)��$��:ϛ,
+�V7� ����*˜���&�3B�-v�+��?Н,�	=�G�]�*u����� ӞH��=��D���gȠj0�����v�4D�5y�����w��B�u�&d�A��{ͦ!I�,k�*��.ç������ �5:�p� ��,��$ժ.��>)�*h�;��,ϫ������;j���u���$�"�� �,�8�9E�(�X��3�?5�8u�2��1�,�:@�4{�5��4�A�M]�-��ٲ��#�+�H�]�q� ��1��%۳8�?:�"z�B��6��&3�.Z�!��!��5͵� �6�K�_�t�	��9��.˶#��,�K�$j�����%η��%�9�-T�1����ʸ)�1�:E�?��&���=�7B�z�!��.��*�#�"4�&W�~�0��:ʻ� �@7�+x�;��3��1�AL���&��-Խ#�0&�;W�0��(ľ?��)-�-W�"������4ؿE
�S�n�,��"��!����5� L�8m�����-��5�,8�Be�B��+��G�$_� ��:��;��3�=P�����&����7��1�DO�c����2�*7�"b�3��:��-��&"�I�c�{���"������(��=�*T�J���"�����/�-N�|�)��%��#��@�@B�'�����������#�)�=�)R�|���!��!��#��"�%?�%e�'��,�������*5�'`�'����!���� �-%�#S�#w�+��%��$��� .�O�g�����"��:���F!�h�����$�������,�#D�h���!��"��:�� �5?� u�2����%����0�*O�$z�/����6��V�"l�(����<��.�)4�(^�*��+����,��)'�4Q�3��2��4��;"�<^�6��:��7
�@E�0��;��?��$3�AX�=��>��$�0<�!m���b��
�c+���:��<��=%�_c�H����8�R�)h�)��+��+����$������\��&��&�'=� e�7��t��23�-f�'��4��.��) �GJ�-����	����k�/l�����>��%��$%�#J�&n�!����!��"��^�@z��������%�+E�7q�!���������/�H�OW�8��*���%�1�=�3I�}���7��5���|4�
+����m��0J�G{���)��!
�/�E�^�3{�$��5��%
+�0�G�"[�4~���!��C��=7�%u�
�� ��(����%�76�n�I��.��6��!6�X�o�G��P��G!�.i�?��#��7��#4�X�+x�2��Y��f1�L��M��&3�KZ�3��=���6�=T���4��(��F�1L�;~�&������%9�._�.��a��e� ���� ��D��?�Y�x���&��-��7��/�7�=�.[�������"�������)*�T�&q�"��"��"���6�Q�p�7��B��H��&F�0m�����6���$�4<�q�O��
+��
+����
+�%�D�%]�*����
����+��7�+<�!h�M��$��4��F2@y6�1�#,=,j#�R� '/$W	|Z�4�2'Iq.�D�GYIQ�^�%T+z2�%�%�1%+WN��!�3*Bm5��"�$�2 +S+,���"
	$0	U	!o	*�	�	*�	0
+04
+&e
+3�
+4�
+5�
+)+,U�D�*�49Qo&�#�#�%�(
.F
9u
"�
'�
*�
.%T!q�(�(�4�40[e,�4�##,G"t"�/�/�++F-r*�&�!�/N f2�0�&�B#U.y��� �1Oc!}3��*�86O4�,�&�1 A'b.��4�1+8dz"���"�/B!V(x�#��:";#^S�M�E$j(�(�*�.0/"`I��4�-(Mv"����� B5`x9�'#;`_��MS*a�*�+�+��,*S-L~-&�-?�-02//c/�/6�/�/"�/:0 W0<x0;�0:�03,12`1(�15�13�1&2}:2>�20�2&(3)O3=y3=�34�3:*4+e4>�44�45$53>5r5"�5�5�5/�56T6c6t6�6@�6f�6KV7C�7H�7;/8Gk89�8�889:<9w9{9Z�9m�9�Q:d�:V8;�;�;�;�;�;f�;U<f<�s<Xd=�=�=:�=;> Y>3z>
�>�>�>P�@g#AE�A`�Aq2Ba�B1C08C0iC0�C,�C9�C"2D=UDH�D.�D%E+1E']E-�E$�E)�E&F*)F,TF�F�F�F�F'�F5GJJGU�G;�G+'H SH<tH�H4�Hk�HjkI[�IG2J~zJ��JP}K6�KDLJL6aLF�L�L(�L'M:M#PM"tM@�M;�MGNG\N�N�N7�N+O*=OhO[�OD�O<%P;bP �P$�P#�P7Q8@Q@yQ$�Q8�Q#R%<RbR"�R#�R"�R"�R.S0>S9oS<�S-�S%TK:TJ�T<�TKU*ZU)�U�U�U�U�U��U�V�V'�VsW7�X�X�X�X	Y1YKLY:�YC�YEZ�]Z[[=,[Ij[g�\}]��a(<c�edf21f7df�f9�fU�f8Ig�gB�g=�g=hYhkh�h��hFwiI�i$jm-j:�j��j,�lQ�li4mb�m,n@.n+onC�n0�n6o
Go,Uo(�o/�o'�o/p?3pVsp]�p(q9/qXiq�qG�q�r�t��u*�{!�{>�{/|@K|P�|&�|n}:s}2�}$�}8~?~D~%Z~X�~	�~J�~3.)b/�3�P�4A�v�/��Àހ,�=�>Z�6��VЁ9'�
+a�%l���.��!ۂ(��)&�LP����������o�|��o��j�CW�G������يu��!�C:��~�'�1D�8v�E��������-��C���'�>E�)��>��G�C5�by�=ܒ���ғ=Ɣ�}
�"��'��֖���W�/p�f��>�OF�E��?ܘA�7^�G��:ޙ<�8V�B��^Қ51�g� ��0��)՛��	�
�" �9C�/}�>��U�'B�Kj�?��*��5!�DW�=��.ڞR	�'\� ����#ß���R+�7~�2��8�"�)B�%l�.��5��+��5#�#Y�9}�A����0�9E�C�EãM	�%W�"}�U��E�� <�0]�:��:ɥ6�(;�6d�'��Cæ\�%d���a��7�Z@�M��/�!�K;�+��>��7�/*�HZ�[��@��5@�Uv�;̫9�8B�+{�-��=լ]�(q���2��6�(�+F�>r�%��\׮4�#F�-j�3��/̯C��K@�.��R��,�$;�\`�O��=
�KK�!����A̲1�[@�#��Q��|���>��2ߴ,�=?�E}�>õ.�1�I�`�y�-��Ŷܶ)�M
�1[�Z���'��"�@�"_�<����(ָ.��3.�Jb�K��C��=�%D�$j�)��,�����5�!Q�&s�%��&��/�#�,;�-h�6��7ͼ(�'.�&V�4}�+��+޽
+�#�%C�)i�B��4־.�?:�,z�*��ҿ%��'�>�U�-o�c���Z�'u���%��0���-�$E�"j�8��*��6��7(�'`�E��"��H��&:�Qa�
��$��!��?�:H�9��F���I�y^�1��,
+�7�JI�7��7��(�9-�<g�(��>��1�O>�H��H��G �Rh�R��O�N^�M��[��LW�P��`��3V�\��X��N@�.��?��+�� *�bK�;��v��9a�@��Y��^6����X�u�/��*����<��8<�Fu�B�����0��*��B���9��E��=�)R�T|����5w�2��0��?�1Q�5��o��2)�\�	x���o��6�
H�V�Dm�.��.��-�,>�)k�%��#��$��|�X�������4�/E�'u�9��3���%�<�Y�r���K��@��3*�^�z�����=����(�D+�Gp������	q�'{����L8�S��,��,�33�"g���/��D��:�RU�<�����3�EQ�;��F��@�B[�6����)��5�"B�9e�H����]�9c�@��&����O:�l��p��=h�Q��9��O2�/��"��B��2�cK�w��V'�R~�:��b�;o�V��%�#(�LL���G��3��[-�F��}��5N���4��0��;
+�DF�B��l��o;�4����*��U�cs�!�����1*�;\�K��	����'��1�	P�'Z�(��+�������9"�(\�E��,��,��(%�N�<c� ����I��T%�Yz�/��<�$A�f�K��
��,��P	�5Z�_�����1�A�2S� ��2��9����.�;D�B��8��,��i)�6��Y��B$Ag7�I�+=G=�.�o�@b7�)�	zI�L�;!2]3�Q�J[a^�h-�:�@�//;_8�O�O$"t,�K�4	E	:`	!�	+�	"�	B
+AO
+5�
+6�
+�
+%:3`"�,�B�3'A[B�;�+
NH
L�
M�
326f�X�5=G�!�!�8�/,M3z8�D�P,0}4�4�J#c*��3�3<4<qu�?$Gd-�;�++BBn=�T�>D>�<�>�0>-o1�*�<�L7H�7�Z8`T�.�1+O7{5��$1)J[:�6�'8>`D�7�)BF%�*�-�C"Af3��%�- 'N'v+����3 2H "{ $� *� G� 16!0h!t�!a"`p"�">�"6*#1a#7�#?�#)$a5$	�$1�$,�$0%01%#b%3�%"�%�%,�%,"&	O&Y&Wr&u�&J@'(�''�'o�'���]�
+f�Q�n>{�k�%D[.1F\KIq\�9����2v�hc-}D<Y�
��~��0��L���DS�HO�|['�N�F����l��<}YGO�����V�	LehX?�b��po�r�RBuW���������2���>����9A���u'�PH?T,.�J_7����a����y!>a��)�=�I�����6t\l1�����w��^t��U�}����*m�-�^�����s����
~�n����������A����S�����8�i,P%������jLy��6��H�g��x��� ��;�}�����C����?@�����C���Ka���=bw�����0����o�b�hX�����s��f2�f�-��&�������������n"�k<��Re�j� �4�;������7z.Z�C�Z��iT3/X����3��I�2�1m��R���0EJt�C��!�����4���f�������JQ��,���!�[s]c���
�8�d�c�L, _5~�@6aU��Q��=\(���Qy�P��E��g��������(�R!��
+������i����AY��+�$��1�p���KWb)|��k��Xi�������d��_T�&$x�{�zo������d��J�g:���q55��������*]N�@G�����3O�8��E�F��
+�rk�B�����(+:��Uq��U�I��V#��j��-�_������V�A�5*�����	����Y��[�D6v��V���G��`+M��@�y�G��B9����`%mp/�|F��"�Ze�W/��$	�d�4�'�o���w^���)�c��|��;��4���M&`p�%��0v^�+���	���z#j��7�mhE����x
�T�(3&M?�`�ls��v���x�l��n�/� e�t)��8��~{��H�B#q�$
+K�O=wZr�����>��N;����z"�M'<�.uW�{��9�S�:g"��:�#����]S���ruN�P��7��*
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on  new Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd bytes.
+ old Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd, main archive=%jd.
+%d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s subprocess failed with wait status code %d%s subprocess returned error exit status %d%s subprocess was interrupted%s subprocess was killed by signal (%s)%s%s suggests %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%.255s' is not a Debian format archive'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one <archname> argument--%s takes one <pkgname> argument--%s takes one <trigname> argument--%s takes one <version> argument--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Authentication is required to run update-alternativesCommands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not chroot into maintainer script environmentDo not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Options:
+  -v, --verbose                    Enable verbose output.
+  -D, --debug                      Enable debugging output.
+      --showformat=<format>        Use alternative format for --show.
+      --deb-format=<format>        Select archive format.
+                                     Allowed values: 0.939000, 2.0 (default).
+      --nocheck                    Suppress control file check (build bad
+                                     packages).
+      --root-owner-group           Forces the owner and groups to root.
+      --[no-]uniform-compression   Use the compression params on all members.
+  -z#                              Set the compression level when building.
+  -Z<type>                         Set the compression type used when building.
+                                     Allowed types: gzip, xz, none.
+  -S<strategy>                     Set the compression strategy when building.
+                                     Allowed values: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Run update-alternatives to modify system alternative selectionsSelecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenValidatable things: pkgname, archname, trigname, version.
+
+VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchitecture name '%s' is invalid: %sarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' is not a regular filearchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurebuilding an unknown package in '%s'.building package '%s' in '%s'.can't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot access archive '%s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open directory '%s'cannot open security status notification channelcannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set primary group ID to rootcannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot stat pathname '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file '%s' for package '%s' is missing valuecontrol file '%s' for package '%s' is missing value separatorcontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is emptyepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while cleaning uperror while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not a Debian binary archive (try dpkg-split?)file '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentformat version with too big major componentformat version with too big minor componentfound unknown packages; this might mean the available database
+is outdated, and needs to be updated through a frontend method;
+please see the FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>generated corrupt ar header for '%s'group '%s' does not existheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalled %s package %s scriptinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal errorinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnew %s package %s scriptnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no 'control' file in control archive!no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete compression type '%s'; use xz insteadobsolete compression type '%s'; use xz or gzip insteadobsolete force/refuse option '%s'obsolete option '--%s'old %s package %s scriptold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoutside error context, abortingoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package architecture is missing or emptypackage contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name '%s' is invalid: %spackage name has characters that aren't lowercase alphanums or '-+.'package not in status nor available database at line %d: %.250spackage signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerevision number is emptyrm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filesyntax error in triggers deferred file '%.250s' at line %d character %zd '%s'takes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo many nested errors during error recoverytoo-long line or missing newline in '%.250s'treewalk root %s is not a directorytrigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name '%s' is invalid: %strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to parse timestamp '%.255s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunrecoverable fatal error, abortingunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion '%s' has bad syntax: %sversion number does not start with digitversion number is emptyversion string has embedded spacesversion string is emptyversioned Provideswait for %s subprocess failedwait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.16.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2017-11-08 00:59+0100
+Last-Translator: Javier Fernandez-Sanguino <jfs@debian.org>
+Language-Team: Spanish <debian-l10n-spanish@lists.debian.org>
+Language: es
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+X-POFile-SpellExtra: reinst all Ian eachfiledetail EOF less showformat
+X-POFile-SpellExtra: skip supported alternatives predep gt fsys find help
+X-POFile-SpellExtra: dereferenciado reinstreq ld depcondetail npquiet
+X-POFile-SpellExtra: diversions Jover show dereferenciada to only lu
+X-POFile-SpellExtra: vextract lt buffercopy include fstat pending split
+X-POFile-SpellExtra: bin Err get instdir rewind none print depotdir
+X-POFile-SpellExtra: confold new not triggersdetail deconfigure trigger
+X-POFile-SpellExtra: Pre xz multiparte list stupidlyverbose remove
+X-POFile-SpellExtra: selections bad architecture debug dselect OR dir
+X-POFile-SpellExtra: Config debsig set Jackson zi ej sobreescribir confdef
+X-POFile-SpellExtra: mv sync Guillem truename depends flush fgets varbuf
+X-POFile-SpellExtra: extract desconfigurado desconfigurarlo lzma
+X-POFile-SpellExtra: redefiniciones predepends merge selected tarfile
+X-POFile-SpellExtra: exclude predepende re version exit preinst rm Wichert
+X-POFile-SpellExtra: partsize redefinición available core Replaces hash
+X-POFile-SpellExtra: conffiles confask sh Sobreescribe bzip downgrade path
+X-POFile-SpellExtra: by wait dry MD search triggers quiet essential
+X-POFile-SpellExtra: confnew depcon act fd admindir dió ci verbose
+X-POFile-SpellExtra: Priority cf conffdetail conflicts mayúsc Hertzog
+X-POFile-SpellExtra: aptitude infospew old Desconfigurando forget uid
+X-POFile-SpellExtra: await log working script fdopen support scan add long
+X-POFile-SpellExtra: avail inst usr var gid fork triggersstupid shell
+X-POFile-SpellExtra: desconfiguración listq statoverride discard assert
+X-POFile-SpellExtra: postrm conff simulate hold unpack dpkg diverted info
+X-POFile-SpellExtra: md multi msdos join versions veryverbose purge record
+X-POFile-SpellExtra: Depends abort install deb root display rename force
+X-POFile-SpellExtra: listpackage conf tar Kb unsafe desactualizando
+X-POFile-SpellExtra: package Dhelp distrib ar listfiles unavail io PATH
+X-POFile-SpellExtra: any contents chroot nl recursive Dh check eq confmiss
+X-POFile-SpellExtra: run desactualizará same predependencia field epoch
+X-POFile-SpellExtra: setenv query build overwrite Conflicts divert config
+X-POFile-SpellExtra: breaks status stat slave reensamblado after nocheck
+X-POFile-SpellExtra: update filenames Raphael Akkerman reensamblados
+X-POFile-SpellExtra: readlink scripts altdir KiB pager eachfile audit
+X-POFile-SpellExtra: refuse eof clear verify conffile desconfigurará
+X-POFile-SpellExtra: desreferenciar chown conrep command gzip postinst
+
+ disparadores pendientes de paquetes que no son o pueden no ser resolubles:
+
+El conffile `%s' no existe en el sistema.
+Instalando el nuevo conffile tal y como se solicitó.
+
+Las opciones de depuración se pueden mezclar haciendo el OR bit por bit.
+Tenga en cuenta que los significados y los valores están sujetos a cambios.
+
+Utilice «dpkg» para instalar o eliminar paquetes de su sistema, o 
+«apt» o «aptitude» si quiere utilizar una herramienta de gestión 
+de paquetes fácil de usar. Aviso: ¡los paquetes que desempaquete con
+«dpkg-deb --extract» no estarán instalados correctamente!
+
+ATENCIÓN - el uso de las opciones marcadas con [!] puede dañar seriamente
+su instalación. Las opciones de forzado marcadas con [*] están activas
+por omisión.
+     No modificado desde la instalación.
+     La versión del paquete es la misma que la de la última instalación.
+     no es un fichero normal   %.255s
+   ¿Qué quisiera hacer al respecto?  Sus opciones son:
+    Y o I  : instalar la versión del desarrollador del paquete 
+    N o O  : conservar la versión que tiene instalada actualmente
+      D    : mostrar las diferencias entre versiones
+      Z    : ejecutar un intérprete de órdenes para examinar la situación
+  %.250s (versión %.250s) está presente y %s.
+  %.250s (versión %.250s) va a ser instalado.
+  %.250s es %s.
+  %.250s está instalado, pero tiene versión %.250s.
+  %.250s no está instalado.
+  %.250s va a ser desconfigurado.
+   %.250s va a ser instalado, pero tiene versión %.250s.
+  %.250s va a ser desinstalado.
+  %.250s está desempaquetado, pero no ha sido configurado.
+  %.250s está desempaquetado, pero tiene versión %.250s.
+  la última versión configurada de %.250s es la %.250s.
+  %.250s proporciona %.250s y está presente y %s.
+  %.250s proporciona %.250s y va a ser instalado.
+  %.250s proporciona %.250s pero es %s.
+  %.250s provee %.250s pero va a ser desconfigurado.
+  %.250s provee %.250s pero va a ser desinstalado.
+%s (%s) provee %s.
+  -?|--help                         Muestra este mensaje de ayuda.
+  --version                         Muestra la versión.
+
+  El paquete %s está esperando al procesado de disparadores.
+ El paquete `%s' no está configurado todavía.
+  El paquete `%s' no está instalado.
+  El paquete `%s' va a ser desinstalado.
+  El paquete `%s' que provee `%s' aún no está configurado.
+  El paquete `%s' que provee `%s' aún no está configurado.
+  El paquete `%s' que provee %s no está instalado.
+  El paquete `%s' provee `%s' pero va a ser desinstalado.
+  La versión de `%s' en el sistema es %s.
+  La versión de `%s' en el sistema, proveída por %s, es %s.
+  La versión de `%s' que se desconfigurará es %s.
+ el enlace %s es %s la mejor versión del enlace es %s. no hay ninguna versión de enlace buena disponible no hay enlace actualmente el enlace apunta actualmente a %s esclavo %s es %s esclavo %s: %s %7jd bytes, %5d líneas  %c  %-20.127s %.127s
+ %d en %s:  %d paquete, de las siguientes secciones: %d paquetes, de las siguientes secciones: %s (%jd bytes)
+%s (%s) rompe %s y es %s.
+ %s (no es un fichero normal)
+ ==> Borrado (por usted o por un script) desde la instalación.
+ ==> Fichero en el sistema creado por usted o por algún script.
+ ==> Fichero también en el paquete.
+ ==> Se conserva el fichero de configuración antiguo como predeterminado.
+ ==> Modificado (por usted o por un script) desde la instalación.
+ ==> El distribuidor del paquete ha publicado una versión actualizada.
+ ==> Se usará el fichero actual (antiguo) como se pidió.
+ ==> Se usará el nuevo fichero de configuración como predeterminado.
+ ==> Se usará el fichero nuevo tal y como se solicitó.
+ Paquete %s: parte/s  La acción por omisión es instalar la nueva versión.
+ La acción por omisión es conservar la versión actual.
+ y  depende de  paquete Debian nuevo, versión %d.%d.
+ tamaño %jd bytes: archivo de control= %jd bytes.
+ paquete Debian antiguo, versión %d.%d.
+ tamaño %jd bytes: archivo de control= %jd, archivo principal=%jd.
+no se ha encontrado %d programa esperado en el PATH o no es ejecutable
+%sno se ha encontrado %d en el PATH o no es ejecutable
+%s%d fichero o directorio instalado actualmente.)
+%d ficheros o directorios instalados actualmente.)
+falta %d componente de control solicitadofaltan %d componentes de control solicitados%s (subproceso): %s
+%s - prioridad %d%s rompe %s%s entra en conflicto con %s%s dañado: %sopción de depuración %s, --debug=<octal> o -D<octal>:
+
+ Número  Referencia en fuentes Descripción
+%s depende de %s%s mejora %sopciones de forzado de %s - controlan el comportamiento cuando hay problemas:
+
+ avisa pero continúa:      --force-<cosa>,<cosa>,...
+ se detiene si hay error:  --refuse-<cosa>,<cosa>,... | --no-force-<cosa>,...
+ Cosas que se pueden forzar:
+%s no está correctamente instalado - no se tendrá en cuenta ninguna dependencia de él%s predepende de %s%s recomienda %sel subproceso %s falló con código de estado de espera %del subproceso %s devolvió el código de salida de error %dse interrumpió el subproceso %sel subproceso %s fue terminado por la señal (%s)%s%s sugiere %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Versión de formato de parte:    %d.%d
+    Parte de paquete:               %s
+         ... versión:               %s
+         ... arquitectura           %s
+         ... suma comprobación MD5: %s
+         ... longitud:              %jd bytes
+         ... troceado cada:         %jd bytes
+    Parte número:                   %d/%d
+    Longitud de parte:              %jd bytes
+    Desplazamiento de parte:        %jd bytes
+    Tamaño de fichero de parte
+        (porción utilizada):        %jd bytes
+
+%s: el conffile `%.250s' no es un fichero normal o un enlace simbólico (= `%s')%s: el conffile `%.250s' apunta a un nombre de fichero degradado
+ (`%s' es un enlace simbólico a `%s')%s: el fichero de configuración `%s' es un enlace circular
+ (= `%s')%s: problemas de dependencias, pero se configurará de todas formas
+ tal y como se solicitó:
+%s%s: problemas de dependencias, pero se procesarán los disparadores de 
+ todas formas tal y como se solicitó:
+%s%s: problemas de dependencias, pero se desinstalará de todas formas
+ tal y como se solicitó:
+%s%s: error al asociar la entrada a los datos bzip2%s: error al asociar la entrada a los datos gzip%s: error al asociar la salida a los datos bzip2%s: error al asociar la salida a los datos gzip<%s: fallo al enlazar `%.250s' a `%.250s': %s%s: fallo al borrar `%.250s' (antes de sobreescribir): %s%s: fallo al eliminar `%.250s': %s%s: fallo al borrar la copia de respaldo antigua `%.250s': %s%s: fallo al borrar la versión de la distribución antigua `%.250s': %s%s: fallo al renombrar `%.250s' a `%.250s': %s%s: error interno de lectura de bzip2%s: error interno de lectura de bzip2: `%s'%s: error interno de escritura de bzip2%s: error interno de escritura de bzip2: `%s'%s: error interno de lectura de gzip%s: error interno de lectura de gzip `%s'%s: error interno de escritura de gzip%s: error interno de escritura de gzip: %s%s: error interno de escritura de gzip: `%s'%s: error de cierre lzma%s: error de lzma: %s%s: error de lectura de lzma%s: error de escritura de lzma%s: error de copia «pass-through»: %s%s: no se puede abrir %s para realizar el resumen: %s%s: no se puede ejecutar «readlink» sobre el conffile `%s'
+ (= `%s'): %s%s: no se puede efectuar `stat' sobre el fichero de configuración `%s'
+ (= `%s'): %s'%.255s' no contiene ningún componente de control `%.255s'`%.255s' no es un archivo en formato Debian`%s' entra en conflicto con `%s'`%s' contiene un valor Priority `%s' definido por el usuario`%s' no utiliza un valorcampo `%s', nombre de paquete inválido `%.255s': %sEn el campo `%s', falta un nombre de arquitectura, o se encontró basura
+donde se esperaba una arquitecturaEn el campo `%s', falta un nombre de paquete, o se encontró basura
+donde se esperaba un nombre de paquetecampo `%s', referencia a `%.255s':
+ `%c' está obsoleto. Utilice en su lugar `%c=' o `%c%c'campo `%s', referencia a `%.255s':
+ relación de versión errónea %c%ccampo `%s', referencia a `%.255s':
+ coincidencia implícita en el número exacto de versión,
+ se sugiere usar `=' en su lugarcampo `%s', referencia a `%.255s':
+ el valor de versión comienza con un carácter no alfanumérico,
+ se sugiere añadir un espaciocampo `%s', referencia a `%.255s': nombre de arquitectura inválido '%.255s': %scampo `%s', referencia a `%.255s': versión incompletacampo `%s', error de sintaxis tras la referencia al paquete `%.255s'`%s' necesita un valor`%s' no se ha encontrado en el PATH o no es ejecutable(Note la desaparición de %s, que ha sido completamente reemplazado.)
+(Leyendo la base de datos ... (no hay ninguna descripción disponible)(total %jd bytes)
+, volcado de «core»la opción -%c no lleva parámetrosla opción -%c lleva un parámetro--%s --pending no toma ningún parámetro que no sea una opción--%s --recursive necesita al menos una ruta como parámetro--%s no soporta (aún) la lectura de un .deb desde la entrada estándar--%s necesita un directorio y un nombre de fichero .deb como parámetro--%s necesita <nombre>--%s necesita <nombre> <ruta>--%s necesita un nombre de fichero .deb como parámetro--%s necesita un directorio como parámetro--%s necesita un <archivo> como parámetro--%s necesita un parámetro--%s necesita un directorio de destino.
+¿A lo mejor lo que quiere hacer es dpkg --install?--%s necesita un nombre de paquete legal, pero `%.250s' no lo es: %s--%s necesita al menos un archivo de paquete como parámetro--%s necesita al menos un nombre de paquete como parámetro--%s necesita cuatro parámetrosla opción --%s no lleva parámetrosla opción --%s lleva un parámetro--%s necesita un número octal positivo como parámetro--%s requiere uno o más ficheros parte como parámetros--%s necesita exactamente un fichero de Paquetes como parámetro--%s lleva a lo sumo dos parámetros--%s toma como mucho dos parámetros (.deb y directorio)--%s toma exactamente un parámetro--%s toma exactamente dos parámetros--%s no toma ningún parámetro--%s toma un parámetro <archname>--%s toma un parámetro <nombrepkg>--%s toma un parámetro <trigname>--%s toma un parámetro <versión>--%s toma un nombre de paquete como parámetro--%s toma solamente un parámetro (fichero .deb)--%s utilizado con el operador de relación osboleto '%s'--auto requiere exactamente un fichero parte como parámetro--auto requiere el uso de la opción --outputrelación --compare-versions errónea--compare-versions toma tres parámetros: <versión> <relación> <versión>--search necesita al menos un patrón de nombre de fichero como parámetro--split necesita un nombre de fichero fuente como parámetro--split toma como mucho un nombre de fichero fuente y un prefijo de destinose ha utilizado --update pero no existe %ses inútil utilizar --update con --remove... parece que todo fue bien..../%s; sin embargo:
+<comprimir> desde tar -cf<deb> es el nombre de fichero de un archivo en formato Debian.
+<cfichero> es el nombre de un componente de fichero administrativo.
+<ccampo> es el nombre de un campo en el fichero de `control' principal.
+<descompresión><dpkg-deb --info pipe><enlace> y <ruta> no pueden ser iguales<enlace> es el enlace simbólico que apunta a %s/<nombre>.
+  (p.ej. /usr/bin/pager)
+<nombre> es el nombre principal para este grupo de enlaces.
+  (p.ej. pager)\n"
+<ruta> es la ubicación para los ficheros objetivo de las alternativas
+  (p.ej. /usr/bin/less)
+<prioridad> es un valor entero, las opciones con el valor más alto tienen más
+  prioridad en modo automático.
+<estado de paquete y descriptor de progreso de fichero><salida de error estándar><entrada estándar><salida estándar>Añadiendo `%s'
+Permite la instalación de paquetes en conflicto.No se modificó la alternativa %s porque la opción %s no está disponible.Instala siempre los ficheros de configuración que faltan.Utiliza siempre los archivos de configuración nuevos, no pregunta.Utiliza siempre los archivos de configuración antiguos, no pregunta.Algún otro proceso ha bloqueado para escritura la base de datos, y puede estar
+modificándola, algunos de los problemas indicados a continuación pueden deberse a ello.
+ArquitecturaAutentificando %s ...
+Es necesario autenticarse para ejecutar `update-alternatives'Órdenes:
+  --add <propietario> <grupo> <modo> <ruta>         
+                            añade una nueva entrada <ruta> en la base de datos.
+  --remove <ruta>           elimina <ruta> de la base de datos.
+  --list [<patrón-glob>]    muestra la información de la base de datos
+                            de redefiniciones.
+
+Órdenes:
+  --check-supported                     Comprueba si el programa dpkg soporta disparadores.
+
+Órdenes:
+  --install <enlace> <nombre> <ruta> <prioridad>
+    [--slave <enlace> <nombre> <ruta>] ...
+                             añade un grupo de alternativas al sistema.
+  --remove <nombre> <ruta>   elimina <ruta> del grupo de alternativas <nombre>.
+  --remove-all <nombre>      eliminar el grupo <nombre> del sistema de alternativas.
+  --auto <nombre>            cambia en enlace maestro de <nombre> a modo automático.
+  --display <nombre>         muestra información del grupo <nombre>.
+  --query <name>             versión tratable por ordenador de --display <nombre>
+  --list <nombre>            muestra todos los destinos del grupo <nombre>.
+  --get-selections           lee todos los nombres de alternativas maestras y su estado.
+  --set-selections           fijae el estado de alternativas de la entrada estándar.
+  --config <nombre>          muestra las alternativas para el grupo <nombre> y le pide
+                             al usuario seleccionar la que quiere utilizar.
+  --set <nombre> <ruta>      configura <ruta> como una alternativa para <nombre>.
+  --all                      llama --config para todas las alternativas.
+
+Órdenes:
+  -s|--split <fichero> [<prefijo>] Trocea un archivo.
+  -j|--join <parte> <parte> ...    Une partes.
+  -I|--info <parte> ...            Muestra información sobre una parte.
+  -a|--auto -o <completa> <parte>  Auto-acumula partes.
+  -l|--listq                       Lista trozos sin correspondencia.
+  -d|--discard [<fichero> ...]     Descarta trozos sin
+                                   correspondencia.
+
+Órdenes:
+  [--add] <fichero>         añade un desvío.
+  --remove <fichero>        elimina un desvío.
+  --list [<patrón-glob>]    muestra los desvíos de ficheros.
+  --listpackage <archivo>   muestra qué paquete desvía el archivo.
+  --truename <fichero>      devuelve el fichero desviado.
+
+Los operadores de comparación para --compare-versions son:
+ lt le eq ne ge gt       (trata una versión inexistente como anterior a
+                           cualquier versión);
+ lt-nl le-nl ge-nl gt-nl (trata una versión inexistente como posterior a
+                           cualquier versión);
+ < << <= = >= >> >       (sólo por compatibilidad con la sintaxis de los
+                           ficheros de control).
+
+Fichero de configuración `%s'
+Fichero de configuración `%s' (en realidad `%s')
+Configura cualquier paquete que pudiera ayudar a éste.Desconfigurando %s (%s) ...
+Desconfigurando %s (%s), para poder eliminar %s (%s) ...
+Herramienta de consulta del sistema de gestión paquetes de Debian `%s' versión %s.
+Herramienta de disparadores de Debian `%s' versión %s.
+Debian %s versión %s.
+Versión `%s' del sistema de gestión de paquetes de Debian `%s'.
+Programa de gestión de paquetes de Debian `%s' versión %s.
+herramienta de división/unión de Debian `%s'; versión %s.
+Desinstalado %s.
+Dependencias y conflictosDescripciónDeseado=desconocido(U)/Instalar/eliminaR/Purgar/retener(H)
+| Estado=No/Inst/ficheros-Conf/desempaqUetado/medio-conF/medio-inst(H)/espera-disparo(W)/pendienTe-disparo
+|/ Err?=(ninguno)/requiere-Reinst (Estado,Err: mayúsc.=malo)
+No ejecutar «chroot» en el entorno de los programs del desarrolladorNo utiliza las operaciones seguras de E/S cuando se realiza desempaqueta.Se encontraron errores al procesar:
+Estado de salida: 
+   0 = OK
+   1 = cuando se utiliza --auto, el fichero no es una parte
+   2 = ¡problemas!
+El fichero `%.250s' no es parte de un archivo multiparte.
+Sintaxis del formato
+  Un formato es una cadena que se mostrará para cada paquete. El formato
+  puede incluir las secuencias de escape estándares \n (nueva línea),
+  \r (retorno de carro) o \\ (barra invertida). Se puede incluir información
+  sobre el paquete insertando referencias variables a los campos del paquete
+  usando la sintaxis ${var[;ancho]}. Los campos se alinearán a la derecha a 
+  menos que el ancho sea negativo, en cuyo caso se alinearán a la izquierda.
+Información de progreso generalmente útil.no se tendrá en cuenta la petición de eliminar la desviación compartida '%s'.
+no se tendrá en cuenta la petición de renombrar el fichero '%s' que pertenece al paquete desviado '%s'
+Se actualizó la información sobre %d paquete.
+Se actualizó la información sobre %d paquetes.
+Montañas de parrafadas (perjudica la salud)Instala un paquete aunque falle la comprobación de autenticidadInstala aunque pudiera romper otro paquete.Instalando una nueva versión del fichero de configuración %s ...
+Llamada y estado de los script del desarrolladorQuedan ficheros basura en el directorio de depósito:
+Dejando `%s'
+Mucha salida sobre dependencias y conflictosParrafadas sobre el directorio dpkg/infoMucha salida por cada fichero de configuraciónMucha salida por cada fichero procesadoMucha información relacionada con disparadoresfin de fichero de MSDOS (^Z) dentro del nombre del campo '%.*s'fin de fichero de MSDOS (^Z) dentro del valor del campo '%.*s' (¿falta nueva línea?)¡Se ha desempaquetado más de una copia del paquete %s!
+ Se configurará solamente una vez.
+NombreNo hay un desvío para `%s', no se ha eliminado ninguno.
+NOTA: El PATH de root debería incluir habitualmente /usr/local/sbin, /usr/sbin y /sbin.Nada que configurar.Ofrece el reemplazo de ficheros de configuración sin versiones nuevas.Opciones:
+  --admindir=<directorio>          Utiliza <directorio> en lugar de %s.
+  --by-package=<paquete>           Evita la espera de disparadores (generalmente
+                                   fijado por dpkg).
+  --await                          El paquete tiene que esperar al procesado.                             
+  --no-await                       Ningún paquete tiene que esperar al procesado.
+  --no-act                         Sólo probar, no cambiar nada realmente.
+
+Opciones:
+   --depotdir <directorio>         Utiliza <directorio> en lugar de %s/%s.
+   -S|--partsize <tamaño>          En Kb, para -s (por omisión es 450).
+   -o|--output <fichero>           Fichero para -j (por omisión es
+                                   <paquete>_<versión>_<arq>.deb)
+   -Q|--npquiet                    Silencioso cuando -a no es una parte.
+   --msdos                         Genera nombres de ficheros en formato 8.3.
+
+Opciones:
+  -v, --verbose                Activa la salida verbosa.
+  -D, --debug                  Activa la salida de depuración.
+      --showformat=<formato>      Utiliza un formato alternativo para --show.
+      --deb-format=<formato>      Selecciona el formato de archivo.
+                                   Los valores permitidos son: 0.939000,
+                                   2.0 (por omisión).
+      --old                       Apodo antiguo para `--deb-format=0.939000'
+      --new                       Apodo antiguo para `--deb-format=2.0'.
+      --nocheck                   Suprime la verificación del fichero de control
+                                  (construye paquetes erróneos).
+      --root-owner-group          Fuerza que el propietario y el gupo sean root.
+      --[no-]uniform-compression  Utiliza los parámetros de compresión en todos
+                                  los miembros.
+  -z#                          Establece el nivel de compresión al construir.
+  -Z<tipo>                     Establece el tipo de compresión a usar cuando
+                               se construye un paquete. Los valores permitidos 
+                               son: gzip, xz, bzip2, none (ninguno)
+  -S<estrategia>               Establece la estrategia de compresión al 
+                               construir. Los valores permitidos son:
+                               none, extreme (xz), filtered, huffman, rle,
+                               fixed (gzip).
+
+Salida para cada fichero de configuraciónSalida por cada fichero procesadoSobreescribe un fichero desviado con una versión no desviada.Sobreescribe un fichero de un paquete con otro.Sobreescribir el directorio de un paquete con el fichero de otroNo se pueden encontrar programas importante en PATH, seguramente cause problemasno se ha establecido la variable PATH.El paquete %s está mantenido, no se toca. Utilice --force-hold para cambiar
+el comportamiento predeterminado
+Paquete %s listado más de una vez, sólo se procesa una.
+El paquete `%s' no contiene ningún fichero (¡!)
+Paquetes todavía no reensamblados:
+Parte %d del paquete %s archivada (todavía se necesita RutaCampo «Pre-Depends»Preparando para desempaquetar %s ...
+Pulse <Intro> para mantener el valor por omisión [*] o pulse un número de selección: PrioridadProcesa incluso los paquetes con arquitectura errónea o sin arquitectura.Procesa incluiso paquetes con versiones incorrectasProcesando disparadores para %s (%s) ...
+Proceso detenido por haber demasiados errores.
+Purgando ficheros de configuración de %s (%s) ...
+Juntando el paquete %s desde %d parte: Juntando el paquete %s desde %d partes: Registrada la información sobre %s a partir de %s.
+Elimina un paquete esencial.Elimina los paquetes que precisan instalación.Desinstalando %s (%s) ...
+Eliminando `%s'
+Reemplaza el paquete con una versión menor.Reemplazado por ficheros en el paquete instalado %s (%s) ...
+Reemplazando información de paquetes disponibles, usando %s.
+Reemplazando ficheros del paquete antiguo %s (%s) ...
+Ejecute `update-alternatives' para modificar la selección de alternativas del sistemaSeleccionando el paquete %s previamente no seleccionado.
+SelecciónActiva todas las opciones de forzado.Configurando %s (%s) ...
+Montañas de parrafadas sobre los disparadoresOmitiendo la línea inválida: %sOmitiendo la alternativa desconocida %s.Omitiendo el paquete no seleccionado %s.
+Diviendo el paquete %s en %d parte: Dividiendo el paquete %s en %d partes: EstadoLos paquetes mostrados a continuación están esperando el procesado de
+disparadores que han activado sobre otros paquetes. Este procesado puede
+solicitarse utilizando dselect o dpkg --configure --pending (o dpkg --triggers-only):
+Los paquetes mostrados a continuación están en un estado de desorden debido
+a serios problemas durante la instalación. Deben ser reinstalados para 
+que éstos (y los paquetes que dependen de ellos) funcionen correctamente:
+Los paquetes mostrados a continuación no están en el fichero de lista 
+de control en la base de datos, tienen que reinstalarse:
+Los paquetes mostrados a continuación carecen del fichero de control
+md5sums en la base de datos, tienen que reinstalarse:
+Los paquetes mostrados a continuación están sólo configurados a medias, 
+probablemente debido a problemas en su configuración inicial. Debe reintentarse su
+configuración con «dpkg --configure <paquete>» o la opción «Configurar» en
+dselect:
+Los siguientes paquetes están sólo instalados a medias, debido a problemas
+durante la instalación. La instalación puede completarse probablemente
+reintentando; los paquetes se pueden desinstalar con dselect o con
+«dpkg --remove»:
+Los paquetes mostrados a continuación no tienen una arquitectura:
+Los paquetes mostrados a continuación tienen una arquitectura ilegal:
+Los paquetes mostrados a continuación tienen una arquitectura desconocida
+foránea, lo que provocará problemas de dependencias en las interfaces
+de acceso a dpkg. Esto puede corregirse registrando la arquitectura
+foránea con «dpkg --add-architecture»:
+Los paquetes mostrados a continuación han activado disparadores, pero no
+se ha  realizado aún el procesado de disparadores. Este procesado puede 
+solicitarse utilizando dselect o «dpkg --configure» --pending (o 
+«dpkg --triggers-only»):
+Los paquetes mostrados a continuación han sido desempaquetados pero no
+configurados aún. Deben configurarse mediante «dpkg --configure» o la 
+opción «Configurar» en dselect para que funcionen:
+Existe %d opción para la alternativa %s (que provee %s).Existen %d opciones para la alternativa %s (que provee %s).No hay un programa que provea %s.Sólo hay una alternativa en el grupo de enlaces %s (provee %s): %sEsto es software libre; consulte la Licencia Pública General de GNU versión 2 o
+posterior para conocer las condiciones de copia. No hay NINGUNA garantía.
+Activación y procesado de disparadoresIntenta (des)instalar cosas incluso sin ser root.Convierte todos los problemas de dependencias en avisos.Convierte todos los problemas de versiones de dependencias en avisos.Escriba `exit' cuando termine.
+Escriba dpkg --help para ayuda sobre instalar y desinstalar paquetes [*];
+Use `apt' o `aptitude' para una gestión de los paquetes más amigable;
+Escriba dpkg -Dhelp para una lista de los valores de depuración de dpkg;
+Escriba dpkg --force-help para una lista de las opciones para forzar cosas;
+Escriba dpkg-deb --help para obtener ayuda sobre manipulación de archivos .deb;
+
+Las opciones marcadas con [*] producen una salida extensa,
+¡fíltrela con `less' o con `more'!Escriba dpkg-deb --help para obtener ayuda sobre manipulación de archivos .deb;
+Escriba dpkg --help para obtener ayuda sobre instalar y desinstalar paquetes.Escriba dpkg-split --help para obtener ayuda.Escriba dpkg-trigger --help para obtener ayuda de esta herramienta.Desempaquetando %s (%s) ...
+Desempaquetando %s (%s) sobre (%s) ...
+Actualizando información de paquetes disponibles, usando %s.
+Modo de uso: %s [<opción> ...] <orden>
+
+Utilice «%s --help» para obtener ayuda del uso del programa.Utilice `apt o 'aptitude' para una gestión de paquetes más amigable.
+Utilice --help para obtener ayuda sobre la desviación de ficheros.Utilice --help para obtener ayuda que indica como redefinir la información de estado de ficheros.Utilice --help para obtener ayuda de la consulta de paquetes.Utilice dpkg -b, --build, -c, --contents, -e, --control, -I, --info,
+ -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+ sobre archivos (escriba %s --help.)
+
+Utiliza la opción predeterminada para los ficheros de
+configuración nuevo si están disponibles, sin
+preguntar. Si no se encuentra ninguno predeterminado
+preguntará, a menos que se utilicen también alguna de
+las opciones confold o confnew.Elementos validables: pkgname, archname, trigname, version.
+
+VersiónNo se ha configurado una versión de dpkg con soporte de %s.
+ Por favor, use `dpkg --configure dpkg', e inténtelo de nuevo.
+Cuando se añaden desvíos, por omisión se utiliza --local y 
+--divert <original>.distrib.
+Cuando se eliminan desvíos, los valores de --package o --local y --divert 
+deben si se especifican.
+Los scripts preinst o postrm de los paquetes deberían siempre especificar
+--package y --divert.
+Desinstalaría o purgaría %s (%s) ...
+[por omisión=N][por omisión=Y][no hay opción predeterminada]«admindir» tiene que estar dentro de «instdir» para que dpkg funcione correctamentetambién configurando `%s' (requerido por `%s')no existe la alternativa %s (parte del grupo de enlaces %s); eliminándola de la lista de alternativasla alternativa %s no puede ser el maestro: es un esclavo de %sla alternativa %s no puede ser esclava de %s: porque es una alternativa maestrala alternativa %s no puede una esclava de %s: es ya una esclava de %sla alternativa %s para %s no está registrada, no se eliminarála alternativa %s para %s no está registrada, no se configuraráel enlace alternativo %s ya está gestionándose con %sel enlace alternativo %s ya está gestionándose con %s (esclavo de %s)el enlace alternativo no es absoluto como debería ser: %sel nombre alternativo (%s) no puede incluir «/» o espaciosla ruta alternativa no es absoluta como debería ser: %snombre ambiguo de paquete '%s' con más de una instancia instaladaya existe una redefinición para '%s', pero se ha especificado --force con lo que se ignoraráya existe una redefinición para `%s', interrumpiendocualquier desviación de %scualquier desviación de %s a %sel nombre del miembro ar '%s' es demasiado largotamaño de miembro ar %jd demasiado largo<vacío><ninguna><desconocida>la arquitectura '%s' es ilegal: %sla arquitectura '%s' está reservada y no puede añadirseel nombre de arquitectura '%s' es inválido: %sel archivo '%.250s' contiene dos miembros de control, abandonoel archivo `%s' contiene un miembro de datos prematuro `%.*s' antes de `%s', abandonoel archivo '%s' no es un fichero normalel archivo `%s' contiene un miembro de datos `%.*s' ininteligible, abandonoel archivo contiene el objeto `%.255s' de tipo 0x%x desconocidotamaño del archivo de control del miembroel archivo tiene un formato de versión inválido: %sel archivo tiene una tamaño del miembro de control mal formado '%s'el archivo no tiene caracteres de nueva línea en la cabecerainformación de cabecera de miembro de archivoel archivo está en el formato de versión %d.%d, consiga un dpkg-deb más modernonúmero de versión mágica del archivocabecera del miembro del archivonúmero de partes del archivoseparación de la parte del archivoparte de archivo númerotamaño total del archivomodo automáticoestán deshabilitadas las actualizaciones automáticas de %s/%s, no se modificaráesperando el procesado de disparadores por otro paquetelínea en blanco dentro del valor del campo '%.*s'roto debido a una desinstalación o instalación fallidaroto debido a fallo en postinstconstruyendo el paquete desconocido `%s'.construyendo el paquete `%s' en `%s'.no se puede instalar la opción desconocida %sno se puede ejecutar `mmap' sobre el fichero `%.255s'no se puede borrar el script postrm antiguono se puede ejecutar `stat' sobre el fichero `%.255s'no se puede acceder al archivo '%s'no se añadir el miembro del fichero ar (%s) a `%s': `%s'no se puede añadir la parte dividida del paquete '%s' a '%s': %sno se puede añadir a '%s'no se puede cerrar la tubería del descompresor:no se puede calcular el resumen MD5 d el fichero '%s': %sno se puedo generar el resumen MD5 para el archivo tar '%.255s': %sno se puede convertir la secuencia multibyte `%s' a un caracter anchono se puede convertir la cadena multibyte `%s' a una cadena de caracter anchono se copiar '%s' al archivo '%s': %sno se puede copiar '%s' a '%s: %s'no se puede copiar el miembro del archivo de '%s' a la tubería de descompresión: %sno se pudieron copiar los datos extraídos de '%.255s' a '%.255s': %sno se pueden desviar directoriosNo se pueden desviar el fichero `%s' a sí mismono se puede extraer el fichero de control '%s' de '%s': %sno se puede extraer la parte dividida del paquete '%s': %sno se pudo obtener el gestor de etiquetas de seguridadno se puede abrir `%.255s' (en `%.255s')no se puede abrir el fichero parte de archivo `%.250s'no se puede examinar el directorio '%s'no se puede abrir el canal de notificación del estado de seguridadno se puede leer el directorio del fichero de configuración `%.250s'
+(a partir de `%.250s')no se puede leer el directorio `info'no se puede borrar `%.250s'no se puede eliminar la arquitectura '%s' puesto que está en uso actualmente en la base de datosno se puede borrar de una arquitectura no foránea `%s'no se puede borrar el antiguo fichero de configuración de respaldo `%.250s'
+(de `%.250s')no se puede borrar el fichero de configuración antiguo `%.250s' (= `%.250s')no se puede borrar la lista de ficheros antiguano se puede renombrar '%s' a '%s'no se puede satisfacer la predependencia para %.250s (necesaria por %.250s)no se puede examinar el directorio `%.255s'no se puede examinar el directorio de actualizaciones `%.255s'no se puede ver cómo satisfacer la predependencia:
+ %sno se pudo fijar el ID de grupo primario a rootno se puede definir el contexto de seguridad para el fichero objeto '%s'no se puede definir el contexto de ejecución de seguridad para el script del desarrolladorno se puede omitir el miembro de control del archivo de '%s': %sno se puede omitir el miembro del archivo de '%s': %sno se puede omitir el archivo '%.255s' (¿reemplazado o excluido?) de la tubería: %sno se puede omitir el relleno sobre el fichero '%.255s': %sno se puedo omiitar la cabecera del paquete para '%s': %sno se puede efectuar `stat' sobre `%.255s' (en `%.255s')no se puede efectuar `stat' el fichero `%s'no se puede efectuar «stat» en la ruta '%s'no se puede zapear los posibles ceros finales de dpkg-deb: %sel carácter `%c' no está permitido (solamente se permiten letras, dígitos caracteres `%s')los datos comprimidos están corrompidoscomprimiendo miembro tarel conffile `%.250s' no aparece dentro del paqueteno se puede efectuar `stat' sobre el conffile `%.250s'el conffile `%s' no es un fichero normalvisualizador de diferencias entre conffilesel conffile `%s' contiene espacios en blanco al final de lineael nombre conffile %s está duplicadoel nombre de conffile `%s' es demasiado largo, o le falta el carácter de nueva línea finalshell de conffileerror de configuración: %s: %d: %sacciones en conflicto -%c (--%s) y -%c (--%s)desvíos conflictivos acerca de `%.250s' o `%.250s'paquetes en conflicto - no se instalará %.250sconsiderando la desconfiguración de %s, ya que lo rompería %s ...considerando la desconfiguración del paquete
+ esencial %s, para activar %sconsiderando desinstalar %s en favor de %s ...el directorio de control tiene permisos erróneos %03lo
+(debe ser >=0755 y <=0775)el directorio de control no es un directorioel fichero de control `%s' no existeel fichero de control del paquete `%s' del paquete `%s' contiene un nombre de fichero vacíofalta un salto de línea al final del fichero de control `%s' del paquete `%s' falta un valor en el fichero de control `%s' del paquete `%s'falta un separador de valor en el fichero de control `%s' del paquete `%s' el archivo de control contiene %cmiembro de controlarchivo de información de formato de base de datos corrupto '%s'no se puede abrir el fichero de registro '%s': %sno se puede efectuar `stat' sobre el fichero antiguo `%.250s' por lo que no se borrará: %sno se pudo abrir `%i' para un flujono se conoce la alternativa actual %s, cambiando a %s para el grupo de enlaces %sse encontró un bucle al procesar los disparadores:
+ la cadena de paquetes cuyos disparadores son o pueden ser responsables:miembro de datosproblemas de dependencias - no se procesarán los disparadoresproblemas de dependencias - se deja sin configurarproblemas de dependencias - no se desinstalaproblemas de dependencias impiden la configuración de %s:
+%sproblemas de dependencias impiden procesar los disparadores de %s:
+%sproblemas de dependencias impiden la desinstalación de %s:
+%sdescartando el enlace esclavo obsoleto %s (%s)desviado por %s de: %s
+desviado por %s a: %s
+desviación de %s por %sdesviación de %s a %s por %s«divert-to» no puede tener saltos de líneadesviado por %s a: %s
+hecho
+desactualizando %.250s de %.250s a %.250sdpkg no registrado como instalado, ¡no se puede comprobar el soporte de %s!
+paquete de disparador esperado duplicado `%.255s'interés de disparador de fichero duplicado para el fichero `%.250s' y el paquete `%.250s'ruta duplicada %sdisparador pendiente duplicado `%.255s'enlace esclavo duplicado `%s'nombre de esclavo duplicado %svalor duplicado para el campo `%s'valor duplicado para el campo definido por el usuario `%.*s'nombre de campo vacíocadena vacía de fgets al leer conffilesno se permiten nombres de disparadores vacíosfin de fichero después del nombre del campo '%.*s'fin de fichero antes del valor del campo '%.*s' (falta nueva línea final)fin de fichero durante el valor del campo '%.*s' (falta nueva línea final)fin de fichero en la entrada estándar al preguntar sobre conffilesépocala época en la versión está vacíala época en la versión es negativala época en la versión no es un númerola época en la versión es demasiado grandeerrorerror al comprobar `%s'error al cerrar %.250serror al cerrar el fichero de configuración `%.255s'error al cerrar/escribir `%.255s'error al crear el dispositivo `%.255s'error al crear el directorio `%.255s'error al crear el enlace duro `%.255s'error al crear la nueva copia de seguridad '%s'error al crear la tubería `%.255s'error al crear el enlace simbólico `%.255s'error al asegurarse de que `%.250s' no existeerror al ejecutar la llamada '%s', código de error %derror al formatear la cadena en una variable «varbuf»error en el formato de presentación: %serror al instalar el nuevo fichero '%s'error al abrir el fichero de conffileserror al cerrar el directorio de configuración `%s'error al procesar el archivo %s (--%s):
+ %serror al procesar el paquete %s (--%s):
+ %serror al leer %.250serror al leer %s del fichero %.255serror al leer el fichero de conffileserror al leer de una tubería de dpkg-deberror al leer los disparadores del fichero dereferenciado `%.250s'error al eliminar la copia de seguridad antigua '%s'error al establecer el propietario de `%.255s'error al establecer la propiedad del enlace simbólico `%.255s'error al establecer los permisos de `%.255s'error al establecer las fechas de `%.255s'error intentando abrir %.250serror al no manejar la señal %s: %s
+error al limpiarerror al escribir '%s'error al escribir `%s'error al escribir en `%s'error al escribir a la lista de arquitecturaserror al escribir en la salida de error estándar, se descubrió antes
+de preguntar sobre conffilesfallo al asignar memoriafallo al asignar memoria para la nueva entrada en la lista de paquetes que han fallado: %sfallo al cambiar al directorio `%.255s'fallo al cambiar al directoriofallo al efectuar `chroot' a `%.250s'fallo al cerrar después de la lectura: `%.255s'fallo al crear directoriofallo al crear tuberíafallo al efectuar `dup' para `fd' %dfallo al efectuar `dup' para std%sfallo al hacer «fstat» del fichero miembro «ar» (%s)fallo al efectuar `fstat' sobre el archivofallo al efectuar `fstat' sobre el fichero de desvíosfallo al efectuar `fstat' sobre el fichero statoverridefallo al crear el fichero temporal (%s)fallo al abrir el fichero de configuración `%.255s' para lectura: %sfallo al abrir fichero de desvíosfallo al abrir el fichero de información del paquete `%.255s' para leerfallo al abrir el fichero statoverrideno se puede abrir el nuevo fichero de lista de intereses de disparadores `%.250s'fallo al leerfallo al leer `%.255s' (en `%.255s')fallo al leer el archivo `%.255s'fallo al borrar el fichero de actualización incorporado %.255sfallo al borrar mi propio fichero de actualización %.255sfallo al efectuar `rewind' sobre el fichero temporal (%s)no se puede rebobinar el fichero de intereses de disparadores `%.250s'fallo al buscarno se puede leer (desreferenciar) el enlace simbólico `%.250s' existenteno se puede leer (desreferenciar) el enlace simbólico propuesto como destino `%.250s' para el enlace simbólico `%.250s'fallo al hacer «stat» del fichero temporal (%s)fallo al borrar el fichero temporal (%s), %sfallo al escribirfallo al escribir el registro de base de datos %s sobre `%.50s' a `%.250s'fallo al escribir los detalles sobre `%.50s' a `%.250s'fallo al escribir el fichero en la tubería de tar (%s)fgets dió una cadena vacía de `%.250s'el nombre de campo `%.*s' no puede comenzar con un guiónel nombre del campo `%.*s' debe estar seguido por dos puntosel ancho del cambio está fuera de rangoel fichero '%.250s' tiene un formato de versión inválido: %sel fichero `%.250s' está dañado - falta %.250s"el fichero `%.250s' está dañado - suma de comprobación MD5 `%.250s' erróneael fichero '%.250s' está dañado - cabecera mágica de archivo erróneael fichero `%.250s' está dañado - número de parte de archivo erróneoel fichero `%.250s' está dañado - dígito erróneo (código %d) en %sel fichero `%.250s' está dañado - magia errónea al final de la
+primera cabecerael fichero `%.250s' está dañado - magia errónea al final de
+la segunda cabecerael fichero `%.250s' está dañado - el número de partes de archivo es erróneoel fichero `%.250s' está dañado - carácter de relleno erróneo (código %d)el fichero `%.250s' está dañado - falta una nueva línea después de %.250sel fichero `%.250s' está dañado - no hay una barra entre los números de parte de archivoel fichero `%.250s' está dañado - hay nulos en la sección de informaciónel fichero `%.250s' está dañado - el segundo miembro no es un miembro
+de datosel fichero `%.250s' está dañado - el tamaño está equivocado por el
+número de parte indicadoel fichero `%.250s' está dañado - demasiado cortoel fichero `%.250s' está dañado - número equivocado de partes para los
+tamaños indicadosel fichero `%.250s' tiene formato versión `%d.%d' - necesita un dpkg-split más modernoel fichero `%.250s' no es un archivo binario de debian (¿intente dpkg-split?)el fichero `%.250s' no es una parte de archivoel fichero `%.250s' está dañado - entero fuera de rango en %sel fichero `%s' no es una parte de archivo
+formato de fichero no reconocidoparece que el fichero pudiera ser un archivo que ha sido dañado
+ al ser transferido en modo ASCIIel nombre de fichero no puede contener caracteres de líneael fichero de registros de disparadores menciona un nombre de paquete ilegal `%.250s' (en el fichero `%.250s'): %.250sel nombre de fichero «%s» no es una ubicación absolutalos ficheros `%.250s' y `%.250s' no son partes del mismo ficheroel fichero de lista de ficheros del paquete `%.250s'
+contiene un nombre de fichero vacíofalta un salto de línea nueva al final del fichero de lista de ficheros del paquete `%.250s' falta el fichero de lista de ficheros del paquete `%.250s', se supondrá que el paquete no tiene ningún fichero actualmente instaladoforzando la reinstalación de la alternativa %s porque el grupo de enlaces %s está rotofallo en `fork'el formato de versión está seguido por basurael formato de versión no incluye un puntonúmero de formato de versiónversión de formato con valor de componente principal vacíoversión de formato con valor de componente menor vacíoversión de formato con valor de componente principal demasiado grandeversión de formato con valor de componente menor demasiado grandese encontraron paquetes desconocidos. Esto puede significar que la
+base de datos está desactualizada y tiene que actualizarse utilizando
+los mecanismos de una interfaz de usuario. Por favor, consulte
+las PUF <https://wiki.debian.org/Teams/Dpkg/FAQ>se generó una cabecera «ar» dañada para '%s'el grupo `%s' no existela cabecera es demasiado larga, lo que hace que la parte sea demasiado larga;
+el nombre del paquete o los números de version tienen que ser 
+extraordinariamente largos o algo raro ha pasado; abandono no se tendrá en cuenta %d aviso sobre el/los fichero/s de controlno se tendrán en cuenta %d avisos sobre el/los fichero/s de controlignorando la rotura, ¡puede procederse de todas maneras!no se tiene en cuenta el conflicto, ¡se procederá de todas maneras!no se tendrá en cuenta el problema de dependencia con %s:
+%s¡descartando problema de predependencia!no se tendrá en cuenta la petición de desinstalar %.250s porque no está instaladose descarta la petición de desinstalar %.250s, del cual sólo los
+ ficheros de configuración quedan en el sistema. Use --purge para
+ borrar estos ficheros tambiénnombre de arquitectura ilegal en el valor '%s:%s': %snombre de paquete esperado ilegal '%.250s': %.250snombre de paquete ilegal en la línea %d: %.250snombre de paquete ilegal en la disparador esperado `%.255s': %snombre de paquete ilegal en el valor '%s%s%s': %snombre de disparador pendiente inválido `%.255s': %sel formato de la base de datos de información (%d) es absurdo o demasiado nuevo; intente obtener un nuevo dpkgarchivo Info %s/%s no asociado con ningún paquetela instalación de `%.250s'instaladoinstalado paquete %s script %ssi se instalara %.250s se rompería %.250s, y 
+ no es posible desconfigurarlo (--auto-deconfigure puede ayudar)la instalación de %.250s rompería software existenteerror internoerror interno (errata)carácter inválido '%c' en archivo '%.250s' miembro '%.16s' tamañocarácter `%c' inválido en el ancho del campocarácter inválido en el número de revisióncarácter inválido en el número de versiónnivel de compresión inválido para -%c: %ldparámetros de compresión inválidos: %sformato de versión deb inválido: %sentero inválido para -%c: `%.250s'entero inválido para --%s: `%.250s'sintaxis desconocida o inválida en el nombre del disparador `%.250s' (en el disparador interesado para el paquete `%.250s')nombre de paquete inválido `%.250s' en la lista dereferenciada de disparadores `%.250s'gid statoverrid inválido %smodo statoverride inválido %suid statoverride inválido %sestado inválidonombre de disparador inválido `%.250s': %.250slínea no terminada al intentar leer %slínea demasiado larga o no terminada al intentar leer %sel enlace %s es al mismo tiempo principal y esclavodesviación local de: %s
+desviación local a %sdesviación local de %s a %sdesviación local a: %s
+desviado localmente a: %s
+ficheros largosel script `%.50s' tiene permisos erróneos %03lo
+(debe ser >=0555 y <=0775)el script `%.50s' no es un fichero normal o un enlace simbólicono se puede efectuar `stat' sobre el script `%.50s'fallo en malloc (%zu bytes)modo manualfichero maestroenlace maestropuede haber problemas al desinstalar %s, ya que provee %s ...no puede ser una cadena vacíase alcanzó el límite de uso de memoriadiferencia al desviar
+  cuando se eliminaba `%s'
+  se encontró `%s'diferencia en el paquete
+  cuando se eliminaba `%s'
+  se encontró `%s'falta el caracter de cierrese ha encontrado una mezcla de paquetes no co-instalables con paquetes co-instalables; esto probablemente se deba a una actualización de un dpkg no oficialmulti-arqmúltiples «Conflicts» y «Replaces»se han encontrado múltiples instancias de paquetes que no son co-instalables; esto probablemente se deba a una actualización de un dpkg no oficialse encontraron múltiples definiciones statoverride para el fichero `%.250s'debe llamarse desde un programa de un desarrollador (o con la opción --by-package)debe comenzar con un carácter alfanuméricodebe comenzar con un carácter alfanuméricoel nombre %s es al mismo tiempo principal y esclavose necesita una opción de acciónnuevo paquete %s script %snueva línea dentro del nombre del campo `%.*s'nueva línea no permitida en el nombre de objeto de archivo '%.255s'no se pemite nueva línea dentro del nombre del campo '%s'no se pueden utilizar saltos de línea en los ficheros de update-alternatives (%s)¡no hay ningún fichero `control' en el archivo de control!no hay alternativas para %sno existe una redefiniciónno hay ninguna información de paquetes en `%.255s'no hay instalado ningún paquete llamado `%s', no se puede configurarno se ha encontrado ningún paquete que corresponda con %s.no se ha encontrado ningún paquete que corresponda con el patrón %s.no, %s es esencial, no se desconfigurará
+ para poder activar %sno, no se puede continuar con %s (--auto-deconfigure ayudará):
+%sno se comprobarán los contenidos del área de controlno instaladono instalado pero queda su configuraciónno se eliminará %s porque no es un enlace simbólicono se sustituirá %s por un enlaceno hay nada tras los dos puntos en el número de versiónnombre de paquete vacío en la lista de --%s separados por coma `%.250s'número de partes de archivola opción '--%s' está obsoleta, los paquetes no disponibles se limpian de forma automáticatipo de compresión obsoleta '%s', utilice xz en su lugartipo de compresión obsoleta `%s', utilice xz o gzip en su lugaropción «force/refuse» obsoleta '%s'opción obsoleta '--%s'antiguo paquete %s script %sel conffile antiguo `%.250s' era un directorio vacío (y ahora se ha eliminado)¡el fichero antiguo `%.250s' es el mismo que algunos de los nuevos ficheros! (tanto `%.250s' como `%.250s')la versión antigua del paquete tiene un nombre de fichero de información
+larguísimo que comienza por `%.250s'solamente se pueden usar versiones exactas para el campo `%s'la apertura del componente `%.255s' (dentro de %.255s)
+falló de forma inesperadamemoria agotada para una nueva entrada de reorganizaciónmemoria agotada para la entrada de reorganización nueva con
+muchos parámetrosmemoria agotada para el nuevo contexto de errorerror fuera de contexto, abortandosobreseyendo el problema porque está activa la opción --force:
+ el paquete %.250s ya está instalado y configuradoel paquete %.250s no está listo para configurarse
+ no se puede configurar (estado actual `%.250s')el paquete %.250s no está listo para procesar disparadores
+ (el estado actual es `%.250s' sin disparadorse pendientes)el paquete %s %s no se puede configurar porque %s está en una versión diferente (%s)el paquete %s no se puede configurar porque %s no está listo (estado actual '%s')el paquete %s contiene `list' como fichero de informaciónel paquete %s requiere ser reinstalado, pero se desinstalará de todas formas tal como se solicitael paquete %s requiere ser reinstalado, no se desinstalaráel paquete %s estaba mantenido, se procesará de cualquier forma como se ha solicitadoell paquete `%s' no está disponible.el paquete `%s' no está instalado.el paquete `%s' no está instalado y no hay ninguna información disponible.arquitectura de paquetela arquitectura del paquete (%s) no corresponde con la del sistema (%s)la arquitectura de paquete no existe o está vacíael paquete contiene un nombre de fichero de información larguísimo
+(comienza con `%.50s')la información de control del paquete contiene el directorio `%.250s'al borrar el directorio `%.250s' en la información de control del paquete
+ocurrió un error distinto de no ser un directorioextracción de la información de control del paqueteel paquete desvía otros a: %s
+extracción de los valores de los campos del paquetesuma de comprobación MD5 del archivo de paqueteextracción del archivo del sistema de ficheros del paqueteel paquete tiene el estado %s pero los disparadores están en esperael paquete tiene estado %s pero los disparadores están pendientesel paquete está en un estado muy malo e inconsistente - debe reinstalarlo
+ antes de intentar desinstalarlo.El paquete está en un estado grave de inconsistencia - debe reinstalarlo
+ antes de intentar su configuración.el nombre de paquete no puede tener saltos de líneanombre de paqueteel nombre de paquete '%s' es inválido: %sel nombre del paquete tiene caracteres que no son minúsculas, alfanuméricos
+o `-+.'el paquete no está en la base de datos de estado o de paquetes disponibles en la línea %d: %.250sverificación de firma de paquetenúmero de versión de paquetefalta la parte %del fichero parte `%.250s' no es un fichero normalel tamaño de la parte es demasiado grande o no es positivoel tamaño de la parte debe ser al menos %d KiB (para admitir una cabecera)correcto
+copiadola ruta no puede tener saltos de líneaproblema de predependencia - no se instala %.250sprioridadla prioridad de %s está fuera de rangoel valor de prioridad debe ser un enterola prioridad de %s está fuera de rango: %sprioridad de %s %serror de lectura en %.250serror de lectura en `%.250s'error de lectura en el fichero de configuración `%.255s'error de lectura en la entrada estándarerror de lectura en la entrada estándar al preguntar sobre conffilesleyendo el fichero info del paquete '%.255s'leyendo el fichero info del paquete '%s': %sleyendo el fichero statoverride '%.250s'paquete reensambladoacerca de %s que contiene %s, problema de predependencia:
+%sacerca de %s que contiene %s:
+%sla eliminación de %.250seliminando la arqutiectura '%s' que está actualmente en la base de datoseliminando la alternativa seleccionada manualmente, conmutando %s a modo automáticorenombrar obliga a sobreescribir `%s' con
+  un fichero distinto `%s', no está permitido.rename: eliminado enlace antiguo duplicado `%s'la operación solicitada precisa privilegios de superusuarioel número de revisión está vacíoórden «rm» para limpiezase buscó, pero no se encontraron paquetes (ficheros que encajen con *.deb)<desconocida>configurando la selección automática de %sse encontraron varias entradas de información de paquetes,
+sólo se permite unaorden del intérprete de órdenes para mover ficherosse omitió la creación de %s porque no existe el fichero asociado %s (del grupo de enlaces %s)fichero esclavoenlace esclavoel enlace esclavo es el mismo que el principal %snombre de esclavoel fichero fuente `%.250s' no es un fichero normalreensamblado de paquete divididoEl fichero statoverride contiene una línea vacíael fichero statoverride no tiene un salto de línea finalestadoregistro de estadoomitiendo «/» finalel subproceso %s devolvió el código de salida de error %del tamaño del enlace simbólico '%.250s' ha cambiado de %jd a %zderror sintáctico en el fichero de disparadores `%.250s'error sintáctico en el fichero statoverrideerror sintáctico en la lista dereferenciada de disparadores '%.250s' en la línea %d, carácter %zd '%s'toma solamente un parámetro, el nombre del disparadorel objetivo es un directorio - no se puede omitir la comprobación del fichero
+de controlhay varias versiones de la parte %d - al menos `%.250s' y `%.250s'no hay ningún script en la nueva versión del paquete - abandonoeste es un paquete esencial - no debe ser desinstalado.para volver a hacer actualizaciones automáticas utilice «%s --auto %s»demasiados errores, parandodemasiados errores anidados durante la recuperación de errorlínea demasiado larga o falta un salto de línea en `%.250s'el directorio de árbol %s no es un directorioerror sintáctico en el fichero de intereses del disparador `%.250s'; nombre de paquete ilegal `%.250s': %.250sel nombre del disparador '%s' contiene caracteres inválidos: %sel nombre del disparador contiene caracteres inválidosaún no existen registros de disparadoresdisparadofichero de disparadores ci `%.250s' contiene una sintaxis de disparador ilegal en el nombre de disparador `%.250s': %.250sel fichero de disparadores ci contiene una directiva desconocida `%.250s'el fichero de disparadores ci contiene una sintaxis de directiva desconocidael directorio de datos de disparadores aún no se ha creadolos disparadores han entrado en bucle, abandonandoprobando el script del nuevo paquete en su lugar...intentando sobreescribir `%.250s', que está también en el paquete %.250s %.250sintentando sobreescribir `%.250s', que es la versión desviada de `%.250s'intentando sobreescribir `%.250s', que es la versión desviada de `%.250s' (paquete %.100s)intentando sobreescribir el directorio `%.250s' del paquete %.250s %.250s con un no directoriointentando sobreescribir el compartido `%.250s', que es distinto de otras instancias del paquetes %.250sse han especificado dos órdenes: --%s y --%sno se puede (re)abrir el fichero parte de entrada `%.250s'no se puede cambiar el propietario del fichero objetivo `%.250s'no se puede comprobar la existencia de `%.250s'no se puede comprobar el estado de bloqueo del fichero `%s'no se puede comprobar la existencia del archivo `%.250s'no se puede efectuar `chown' sobre el enlace simbólico de respaldo de `%.255s'no se puede arreglar el desaguisado de `%.255s' antes de instalar otra versiónno se puede cerrar el fichero `%s'no se puede cerrar el nuevo fichero '%.250s'no se puede cerrar el nuevo fichero dereferenciado de disparadores `%.250s'no se puede cerrar el estado actualizado de `%.250s'no se puede crear `%.255s'no se pudo crear `%.255s' (mientras se procesaba `%.255s')no se puede crear el fichero '%s'no se puede crear el nuevo fichero '%.250s'fallo al crear directorio temporalno se puede crear el directorio de estado de disparadores `%.250s'no se puede borrar el fichero de información de control `%.250s'no se puede borrar el directorio antiguo `%.250s': %sno se puede borrar fichero de depósito usado `%.250s'no se puede descartar `%.250s'no se puede ejecutar %s (%s)no se puede llenar %.250s con rellenono se puede efectuar `flush' %.250s tras el rellenono se puede volcar el fichero `%s'no se puede volcar el nuevo fichero '%.250s'no se puede efectuar `flush' con el estado actualizado de `%.250s'no se puede efectuar `stat' sobre el fichero fuenteno se puede efectuar `fsync' en el estado actualizado de `%.250s'no se puede leer el descriptor de ficheros para el directorio '%s'no se puede descartar la señal %s antes de ejecutar %.250sno se puede instalar `%.250s' como `%.250s'no se puede instalar el (supuestamente) nuevo fichero de información `%.250s'no se puede instalar el nuevo fichero de información `%.250s' como `%.250s'no se puede instalar el nuevo fichero dereferenciado de disparadores `%.250s'no se puede instalar una nueva versión de `%.255s'no se puede instalar el estado actualizado de `%.250s'no se puede desbloquear %sno se puede crear un enlace de seguridad de `%.255s' antes de instalar
+la nueva versiónno se puede respaldar enlace simbólico para `%.255s'no se puede apartar `%.255s' para instalar una nueva versiónno se puede abrir `%.255s'no se puede abrir el fichero '%s'no se puede abrir el fichero `%s'no se puede abrir el nuevo fichero de depósito `%.250s'no se puede abrir el fichero de salida `%.250s'no se puede abrir el fichero fuente `%.250s'no se puede abrir el directorio de control temporalno se puede abrir el fichero de disparadores ci `%.250s'no se puede abrir el fichero de disparadores dereferenciado `%.250s'no se puede abrir/crear el nuevo fichero de disparadores dereferenciado `%.250s'no se puede analizar la marca de tiempo `%.255s'no se puede leer el directorio de depósito `%.250s'no se puede leer el fichero de disparadores `%.250s'no se pueden leer las propiedades del descriptor de ficheros para `%.250s'no se puede leer el enlace `%.255s'no se puede leer el fichero parte `%.250s'no se puede eliminar '%s'no se puede borrar la copia de respaldo de `%.250s'no se puede eliminar el fichero fuente copiado '%s'no se puede borrar la versión recién extraída de `%.250s'no se puede borrar la versión recién instalada de `%.250s'no se puede borrar la versión recién instalada de `%.250s' para permitir
+la reinstalación de la copia de seguridadno se puede borrar el fichero de información obsoleto `%.250s'no se puede renombrar el nuevo fichero de depósito `%.250s' a `%.250s'no se puede reabrir el fichero parte `%.250s'no se puede restablecer la versión de respaldo de `%.250s'no se puede borrar de forma segura `%.250s'no se puede borrar de forma segura `%.255s'no se puede borrar de forma segura el fichero antiguo `%.250s': %sno se puede volver al comienzo de %.250s después del rellenono se puede establecer almacenamiento intermedio para el archivo de base de datos %sno se puede establecer el atributo close-on-exec para `%.250s'no se pueden establecer los permisos de ejecución en `%.250s'no se puede establecer el modo del fichero objetivo `%.250s'no se puede efectuar `setenv' para el script del desarrolladorno se puede efectuar `setenv' para el subprocesono se puede efectuar `stat' sobre %s `%.250s'no se puede efectuar `stat' sobre %s `%.250s': %sno se puede efectuar `stat' sobre `%.250s'no se puede ejecutar «stat» sobre el directorio de controlno se puede efectuar `stat' sobre el conffile `%.250s' actualmente instaladono se puede efectuar `stat' sobre el nuevo conffile distribuido `%.250s'no se puede efectuar `stat' otro fichero nuevo `%.250s'no se puede efectuar `stat' sobre el `%.255s' restablecido antes
+de instalar otra versiónno se puede ejecutar «stat» el fichero fuente `%.250s'no se puede efectuar `stat' sobre el fichero dereferenciado de disparadores `%.250s'no se puede hacer «sync» del directorio '%s'no se puede hacer «sync» en el fichero `%.255s'no se puede hacer «sync» del fichero `%s'no se puede hacer «sync» en el nuevo fichero '%.250s'no se puede truncar el estado actualizado de `%.250s'no se puede desbloquear %sno se puede escribir el fichero `%s'no se puede escribir en el nuevo fichero '%.250s'no se puede abrir el nuevo fichero dereferenciado de disparadores `%.250s'no se puede escribir al descriptor de fichero de estado %dno se puede escribir el estado actualizado de `%.250s'comillas no balanceadas en '%s'se produjo un error inesperado de bzip2datos inesperados tras el paquete y selección en la línea %dfin de fichero inesperado tras el nombre del paquete en la línea %dfin de fichero inesperado antes del fin de la línea %dfin de fichero inesperado en %s en %.255sfin de fichero inesperado en el nombre del paquete en la línea %dfin de fichero o de flujo inesperado fin de fichero inesperado al leer '%.250s'fin de fichero inesperado al intentar leer %sfin de entrada inesperadafin de línea inesperado tras el nombre del paquete en la línea %dfin de línea inesperado en el nombre del paquete en la línea %dfin de línea inesperado en el fichero statoverrideparámetro «%s» desconocidoestrategia de compresión desconocida¡estrategia de compresión '%s' desconocida!¡tipo de compresión `%s' desconocido!formato de versión deb desconocido: %sopción «force/refuse» desconocida `%.*s'opción `%s' desconocidaopción -%c desconocidaopción --%s desconocidaformato de salida de verificación `%s' desconocidoestado deseado desconocido en la línea %d: %.250sdesempaquetado pero sin configurarerror fatal irrecuperable, abortandotipo de compresión prefijada no soportadoel tipo de compresión `%s' no está soportado con compresión uniformeopciones no soportadas en la cabecera del ficherotipo de comprobación de integridad no soportadael directorio de actualizaciones contiene el fichero
+`%.250s',
+cuyo nombre es demasiado grande (longitud=%d, max=%d)el directorio de actualizaciones contiene ficheros con nombres de longitudes
+diferentes (%d y %d)actualizando la alternativa %s porque han cambiando los enlaces esclavos del grupo de enlaces %sel usuario `%s' no existenombre de campo definido por el usuario `%.*s' demasiado cortoutilizando %s para proveer %s (%s) en modo automáticoutilizando %s para proveer %s (%s) en modo manualel valor de `%s' tiene una línea mal formateada `%.*s'el valor para el campo `%s' no está permitido en este contexto¡Falló la verificación del paquete %s!falló la verificación del paquete %s, pero se instalará de todas formas tal como ha solicitado<ninguna>Versión %.250s de %.250s ya instalada, omitiendola versión '%s' tiene una sintaxis erróneala versión '%s' tiene una sintaxis errónea: %sel número de versión no empieza por un dígitoel número de versión está vacíola cadena de versión tiene espacios en su interiorla cadena de versión está vacía«Provides» versionadofalló la orden `wait' para el subproceso %sfalló la orden `wait' para el subproceso %satenciónmientras se leía %s: %sal desinstalar %.250s, el directorio «%.250s» no está vacío, por lo que no se borraal desinstalar %.250s, no se puede borrar el directorio `%.250s': %s - ¿el directorio puede ser un punto de montaje?no se desactualizará %.250s de la versión %.250s a la %.250s, omitiendo.sí, se desconfigurará %s (roto por %s)sí, se desinstalará %s en favor de %sdebe especificar los paquetes por sus propios nombres, no citando los nombres
+de los ficheros en los que vienen
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/et.gmo dpkg-1.20.7.1/po/et.gmo
--- dpkg-1.20.7.1-orig/po/et.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/et.gmo	2021-06-09 18:25:14.695503032 -0500
@@ -0,0 +1,115 @@
+�����|h=i&�.��5*1`$�/�$�,6L1�1�!�	)!9K.�'�&�357ms��������-:Q l���#�!�K45�-�!�5 V,n�H�6(;d�p00G3x�*�-�,:C-~���� g,�$����!�&;b}3���&E+-q,�*�"� -?m)���!�!.%Kq!� �#�+�%$?dw$����5	 ? +_ )� 4� 4� ;!0[!$�!$�!!�!�!"<4"q"'}"	�"�"�"�"�"4#%H#2n#Y�#4�#10$ b$�$.�$�$)�$%0%%N%t%+�%@�%%�%+&*H&s&+�&)�&,�&D'*U'#�'#�'.�'�'*(6?(&v(4�(1�())9)L)S`)(�)"�)**^ *F+&�+*�+,),>E,,�,,�,B�,!!-C-`-0y-+�-'�-%�-$.C9.C}.6�./�.,(/2U/7�/�/�/�/�/�/0.0D0\0q0(�0�0�0.�0+1=1"Y1%|1�1!�1c�17H28�2/�2,�2;3R32i3�3F�3<4*?4j4�w45+56E5.|5	�51�50�56&69D64~6!�6!�6��6)�74�7&�78
8
+898,Y8.�8$�8!�8B�81?9/q99�9@�90:2M:,�:"�:�:�:9�:/;'F;%n;�; �;�;�; <-< C<d<!�<)�<)�<%�<='6=,^=�=�= �=5�=!>)3>(]>>�>=�>A?8E?(~?�?�?"�?@8$@]@x@�@$�@�@�@$�@G"A jA.�AX�A/B-CB"qB	�B6�B*�B&C 'C4HC!}C#�C1�C=�C-3DJaD0�D"�D3E84E'mEU�EY�E+EF)qF3�F$�F2�F/'GWG(wG#�G�G�G�G
+HmH>�H"�H�HI�^ Y6���94��K��|Smi{�,C�j}h	NdD2X@?M[Ef`�&��*�ROZ=wW�5J)��kn�o3�F��(�;c�tV$�s_e8�A��-�<!�\�>p+a�qbr�P�:7��1��Q]LlxTBG�0��yU
��vI��~z#�.�'�/��u
+���g�%��H"     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is not installed.
+  %.250s is unpacked, but has never been configured.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be removed.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+ %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+%s breaks %s%s conflicts with %s%s depends on %s%s enhances %s%s pre-depends on %s%s recommends %s%s suggests %s'%s' field, invalid package name '%.255s': %s(Reading database ... (no description available)-%c option does not take a value-%c option takes a value--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument; however:
+<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+Authenticating %s ...
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+DescriptionErrors were encountered while processing:
+Installing new version of config file %s ...
+NamePackage '%s' does not contain any files (!)
+Processing was halted because there were too many errors.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Version[default=N][default=Y]archive has no newlines in headercan't remove old postrm scriptcannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot scan directory '%.255s'cannot scan updates directory '%.255s'character '%c' not allowed (only letters, digits and characters '%s')conflicting actions -%c (--%s) and -%c (--%s)conflicting packages - not installing %.250sdependency problems - leaving unconfigureddependency problems - not removingdone
+duplicate value for '%s' fieldduplicate value for user-defined field '%.*s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error reading %.250serror reading %s from file %.255serror reading from dpkg-deb pipeerror setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error writing '%s'failed to chdir to directoryfailed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to open diversions filefailed to open package info file '%.255s' for readingfailed to read archive '%.255s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - too shortfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfilename "%s" is not absolutefiles list file for package '%.250s' contains empty filenamefork failedillegal package name at line %d: %.250sinstalledlocally diverted to: %s
+may not be empty stringneed an action optionnewline in field name '%.*s'no package named '%s' is installed, cannot configurenothing after colon in version numberpackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package architecture (%s) does not match system (%s)package control info contained directory '%.250s'package may not contain newlinespassed
+pre-dependency problem - not installing %.250spriority must be an integerread error in configuration file '%.255s'read error on standard inputrequested operation requires superuser privilegesource file '%.250s' not a plain filestripping trailing /subprocess %s returned error exit status %dthere is no script in the new version of the package - giving upunable to check existence of '%.250s'unable to chown backup symlink for '%.255s'unable to close updated status of '%.250s'unable to create '%.255s'unable to delete control info file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to open output file '%.250s'unable to open source file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown argument '%s'unknown compression type '%s'!unknown option -%cunknown option --%supdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywarningProject-Id-Version: dpkg 1.14.5
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:49+0200
+Last-Translator: Ivar Smolin <okul@linux.ee>
+Language-Team: Estonian <et@li.org>
+Language: et
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+     Pakis olev versioon on sama, mida kasutati viimasel paigaldusel.
+     pole lihtfail             %.255s
+  paigaldatakse %.250s (versioon %.250s).
+  %.250s on %s.
+  %.250s pole paigaldatud.
+  %.250s on lahti pakitud, kuid seda pole kunagi seadistatud.
+  %.250s tagab %.250s ja see paigaldatakse.
+  %.250s tagab %.250s, kuid on ühtlasi %s.
+  %.250s tagab paki %.250s, kuid see on määratud eemaldamiseks.
+  Pakk %s pole veel seadistatud.
+  Pakk %s pole paigaldatud.
+  Pakk %s eemaldatakse.
+  Pakk %s, mis tagab %s, pole veel seadistatud.
+  Pakk %s, mis tagab %s, pole paigaldatud.
+  Pakk %s, mis tagab %s, eemaldatakse.
+  Süsteemis olev %s versioon on %s.
+ %s (pole lihtfail)
+ ==> Sinu nõudmisel jäetakse vaikimisi vana seadistusfail alles.
+ ==> Paki distribuutor on pakiga kaasa pannud uuendatud versiooni.
+ ==> Sinu nõudmisel kasutatakse praegust vana faili.
+ ==> Vaikimisi kasutatakse uut seadistusfaili.
+ ==> Sinu nõudmisel kasutatakse uut faili.
+ Vaikimisi toiming on uue versiooni paigaldamine.
+ Vaikimisi toiming on praeguse versiooni säilitamine.
+ ja  sõltub pakist %s (alamprotsess): %s
+%s lõhub paki %s%s on vastuolus pakiga %s%s sõltub pakist %s%s täiustab pakki %s%s eelsõltub pakist %s%s soovitab pakki %s%s vihjab pakile %sväli `%s', vigane pakinimi `%.255s': %s(Andmebaasi lugemine ... (kirjeldus pole saadaval)-%c võtmel ei tohi väärtust olla määratud-%c võtmel peab olema määratud väärtus--%s vajab argumenti <nimi>--%s vajab argumente <nimi> <rada>--%s vajab argumendiks .deb failinime--%s vajab argumenti <kataloog>--%s vajab ainult ühte argumenti--%s jaoks peab olema määratud sihtkataloog.
+Võib-olla peaks sa kasutama käsku dpkg --install ?--%s vajab argumendiks vähemalt ühte pakiarhiivi nime--%s vajab vähemalt ühte argumenti, mis oleks pakinimi--%s võtmel ei tohi väärtust olla määratud--%s võtmel peab olema määratud väärtus--%s vajab kõige rohkem kahte argumenti (.deb ja kataloog)--%s ei vaja argumente--%s vajab ainult ühte argumenti (.deb failinimi)--compare-versions vigane suhe--compare-versions vajab kolme argumenti: <versioon> <suhe> <versioon>--search vajab argumendiks vähemalt ühte failinime mustrit--split vajab argumendiks lähtefaili nime; igatahes:
+<deb> on Debiani vormingus arhiivifaili nimi.
+<jfail> on administratiivse failikomponendi nimi.
+<jväli> on peamises `control' failis oleva välja nimi.
+
+Faili %s autentimine...
+Debian'i %s versioon %s.
+Debiani `%s' pakiarhiivi taustaprogrammi versioon %s.
+Debiani pakihaldusprogrammi `%s' versioon %s.
+KirjeldusJärgnevate pakkide töötlemisel tekkisid vead:
+Seadistusfaili %s uue versiooni paigaldamine...
+NimiPakk `%s' ei sisalda ühtki faili (!)
+Töötlemine katkestati liiga suure vigade hulga tõttu.
+Saadaolevate pakkide andmete asendamine failist %s.
+Paki %s (%s) paikasättimine ...
+Kui valmis saad, sisesta `exit'.
+Käsu dpkg-deb --help väljund räägib *.deb failidega ümberkäimisest;
+Käsu dpkg --help väljund räägib pakkide paigaldamisest ja eemaldamisest.Abiteabe jaoks sisesta dpkg-split --help.Saadaolevate pakkide andmete uuendamine failist %s.
+Kasutamine: %s [<võti> ...] <käsk>
+
+Versioon[vaikimisi=N][vaikimisi=Y]arhiivipäises pole reavahetusivana postrm skripti pole võimalik eemaldadaarhiiviosa faili `%.250s' pole võimalik avadaandmekataloogi pole võimalik lugeda`%.250s' pole võimalik eemaldadavana seadistusfaili `%.250s' pole võimalik eemaldada (= `%.250s')vanade failide nimekirja pole võimalik eemaldadakataloogi `%.255s' pole võimalik läbi vaadatauuenduste kataloogi `%.255s' pole võimalik läbi vaadatamärk `%c' pole lubatud (ainult tähed, numbrid ja `%s' märgid)vastuolulised tegevused -%c (--%s) ja -%c (--%s)vastuolulised pakid, %.250s jäetakse paigaldamatasõltuvusprobleemid - jäetakse seadistamatasõltuvusprobleemid - ei eemaldatavalmis
+korduv välja `%s' väärtuskorduv kasutaja poolt kirjeldatud välja `%.*s' väärtusviga %.250s sulgemiselviga seadistusfaili `%.255s' sulgemiselviga `%.255s' sulgemisel/kirjutamiselviga seadme `%.255s' loomiselviga kataloogi `%.255s' loomiselviga viida `%.255s' loomiselviga toru `%.255s' loomiselviga nimeviida `%.255s' loomiselviga %.250s lugemiselviga %s lugemisel failist %.255sviga dpkg-deb torust lugemiselviga `%.255s' omaniku sättimiselviga nimeviida `%.255s' omaniku seadmiselviga `%.255s' pääsuõiguste sättimiselviga `%.255s' ajatemplite sättimiselviga `%s' kirjutamiseltõrge kataloogi aktiveerimisel (chdir)tõrge sulgemisel pärast lugemist: `%.255s'tõrge kataloogi loomiseltõrge toru loomiseltõrge diversioonifaili avamiseltõrge pakiandmete faili `%.255s' lugemiseks avamiseltõrge arhiivi `%.255s' lugemiselväljanimele `%.*s' peab järgnema koolonfail `%.250s' on rikutud - puudub %.250sfail `%.250s' on rikutud - MD5-kontrollsumma `%.250s' ei klapifail `%.250s' on rikutud - vigane number (kood %d) väljal %sfail `%.250s' on rikutud - esimese päise lõpus on vigane maagiafail `%.250s' on rikutud - teabesektsioon sisaldab nullefail `%.250s' on rikutud - liiga lühikefail `%.250s' pole arhiivi osafail `%s' pole arhiivi osa
+fail ei tohi sisaldada reavahetusifailinimi "%s" pole absoluutnepaki `%.250s' failide nimekiri sisaldab tühja failinimetõrge fork() funktsioonisvigane pakinimi real %d: %.250spaigaldatudkohalik ümbersuunamine failile: %s
+ei tohi olla tühi stringtegevuse võti on vajalikreavahetus pärast kirje `%.*s' nimepakki `%s' pole paigaldatud ja seetõttu pole seda võimalik seadistadaversiooninumber lõpeb koolonigapakk %.250s on juba paigaldatud ja seadistatudpakk %.250s pole seadistamiseks valmis
+ seadistamine pole võimalik (hetkeolek `%.250s')paki arhitektuur (%s) ei vasta süsteemile (%s)paki juhtandmed sisaldavad kataloogi `%.250s'pakk ei tohi sisaldada reavahetusiläbitud
+eelsõltuvuse probleem - %.250s jäetakse paigaldamatatähtsus peab olema määratud täisarvugaviga seadistusfaili `%.255s' lugemiselviga standardsisendist lugemiselselle toimingu jaoks on vaja superkasutaja õiguseidlähtefail `%.250s' pole lihtfaillõpus olev kaldkriips eemaldataksealamprotsess %s tagastas lõpetamisel veakoodi %dpaki uues versioonis pole skripti - rohkem ei proovita midagi`%.250s' olemasolu pole võimalik kontrollidafaili `%.255s' nimeviidale pole võimalik pääsuõigusi määrata (chown)`%.250s' uuendatud olekut pole võimalik sulgedafaili `%.255s' pole võimalik luuajuhtandmete faili `%.250s' pole võimalik kustutadafailist `%.255s' pole võimalik uut versiooni paigaldada`%.250s' olekut pole võimalik uuendadafailist `%.255s' pole võimalik enne uue versiooni paigaldamist varukoopia viita luuafailist `%.255s' pole võimalik enne uue versiooni paigaldamist varukoopia nimeviita luuaväljundfaili `%.250s' pole võimalik avadalähtefaili `%.250s' pole võimalik avada%.250s failideskriptori lippe pole võimalik lugedaviita `%.255s' pole võimalik lugeda`%.250s' uuendatud olekut pole võimalik kirjutadaootamatud andmed peale pakki ja valikut real %dootamatu %s lõpp failis %.255sootamatu realõpp peale pakinime real %dootamatu realõpp pakinimes real %dtundmatu argument `%s'tundmatu pakkimisliik `%s'!tundmatu võti -%ctundmatu võti --%suuenduste kataloog sisaldab faili `%.250s', mille nimi on liiga pikk (pikkus %d, suurim lubatud suurus on %d)kasutaja poolt kirjeldatud välja `%.*s' nimi on liiga lühikeversioonistring sisaldab tühikuidversioonistring puudubhoiatus
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/eu.gmo dpkg-1.20.7.1/po/eu.gmo
--- dpkg-1.20.7.1-orig/po/eu.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/eu.gmo	2021-06-09 18:25:14.750503117 -0500
@@ -0,0 +1,710 @@
+������:�N?�Na�Nk;O��O�oP&�P=Q&UQ|Q-�R.�R�R.�R-S IS4jS�S5�S-�S.T0NT1T$�T4�T/U;UqSU(�U$�UV3V:SV6�V1�V1�V!)W2KW(~W�W�W�W.�WXS'X{X�X�X9�Xm�X)kY:�Y9�Y.
+Z'9Z&aZ�Z3�Z5�Z[[v[[�[U�[D\Y\j\w\�\Z�\�\]�]=�] ^5^F^�U^=1`Ro`1�`D�`L9aA�a'�a&�a(b'@b+hb4�b!�b,�b9c-Rc�c#�c�c$�cd"#dFd!dd#�d�d�d�d�d�d"e2>e1qe/�e�e.�ef-4fRbfH�fQ�fAPge�gf�gI_h7�h<�hi(1iBZi�i�i�i
�i �ij5*j1`j0�j�j�j#�j!k4kQkKnk7�k5�k-(lVl!pl�l'�l-�l-m 0m5Qm�m �m�m$�m,n.2n.an�nH�n6�n(0o>Yo$�o �o�o�opp�(p�p#�p:q-=rkr|r�r�r*�r<�r#s-8s-fs��s)t6t�Mt[Cu��ug�y
{|(}(A}-j}�}8�}<�}.*~Y~0p~3�~1�~/�;1�*"�JM�2���ˀ&p�2��EʂV�g�5��.��-�+�/?�
o�%}�/��*ӄ&��!%�]G���!��M̅�20��c���"��ʉ4�.�5M�3����GǊ8�,H�u�(����ԋ��3��)-�$W�:|�,��V� ;�\�*x�����&ȍ3�-#�+Q�,}�	����ʎ*�
�#� @�Ha���������g5�j������4��5��������u[�&іA��{:�!��,ؗ*�.0�_��~��� ��5��ݚ ��,�$B�.g�>��*՛;�,<��i�$�u,����"{�������9Þ(��X&�3�?��8�2,�1_�,��:��4��5.�4d�A��Mۡ-)�W�k�#����Ƣۢ� �1'�8Y�?��Bң6�L�&h�.��!��!�5�8�U�k�������	��9ƥ.�#/�,S�����%���%�-*�1X�����)��1�:�?V�&����=ڨ7�P�!j�.��*��#�"
+�&-�0T�����@��+��;$�3`�����A̫�&-�-T�0��;��0�( �?I�)��-��"��4�EO���,��"ݮ!�"�5A� w�8��ѯ�-��5-�,c�B��BӰ+�GB�$�� ��:б;�G�`�&o���7���D�cM���2��*�"�3>�:r�-��&۴��4�J�"f�����(��=ϵ*
�J8���"����ж�-�5�)F�%p�������ط�����)#�M�l�!��!��#ϸ�%�%6�'\�,����ʹ�*�'1�'Y���!���� պ-��#$�#H�+l�%��$��� �� �9�L�"b�:����Fڼ!�=�Z�$w�����ͽ�#��!�9�!Y�"{�:��پ5�� .�2O���%����0׿*�$3�/X���6��V��"%�(H�q�<��.��)��(�*@�+k���,��)��4
+�3?�2s�4��;��<�6T�:��7��@��0?�;p�?��$��A�=S�$��0��!��	�b$���c��	�:'�<b�=��_��H=���������)��)�$6��[�\��&<�&c�'�� ��7��t�2��-��'��4	�.>�)m�G��-��
�	$�k.�/����>��%�$D�#i�&��!����!��"�^:�@����%��+�7;�!s������������O!�8q�*���������3�G�_�7z�5����|��
+{���m��0�GE���)��!�����5,�b�y�"��4����!�C%�=i�%��
�� ��(��%�%B�7h���I��G�PJ�G��.��?�#R�7v�#��+��2��Y1�f��L��M?�&��K��3�=4�r���=����4�F6�1}�;��&���1�P�%j�.��.��a��eP� ����D��)�H�_�&r�-��7�����
�.+�Z�c�|�"��������)��$�&A�"h�"��"����6��!�@�7R�B��H��&�0=�n�6����$��4��(�OD�
+��
+����
+��%����%�*:�e�
l�z�+��7��+��!�$A�4f�F��@��6#�1Z���,��R��'&�$N�	s�Z}�4��2
�'@�h�.��D��G��Y@�Q��^��%K�+q�2��%��%��1�+N�Nz���!��3�*9�d�5~���"��$��2�+J�+v�,������"�$'�L�!f�*����*��0��0+�&\�3��4��5��)"�,L�y�D��*��4��0�H�f�&�#��#��%��(�.=�9l�'��*��.��(�!E�g�(}�(��4��4�[9�,��4��#��,�"H�"k�/��/��+��+�-F�*t�&��!�����"� :�2[�0��&��B��#)�.M�|����� ��1��#�7�!Q�3s���*�����6#�&Z� ��.����4��1�+P�|���"������"�3�G�Z�!n�(������:��"/#RSvM�E(^(�*�.�0
+";I^�4�(�"8Pc��B�`�9B'|#�`��)O�qv����%a	3�	&�	�	(�
+/#S5d�#�7�A/9q4�8�>
,X
C�
:�
}$2�-�"&GEB�7�3$<3a,����-

+;<F�'��8�w?�9�:C@>�?�3?N����lPM�"6Kjd���@�#<`y��Zvk�D=B�<�<0?/p4�/�=<C(�:�A�=&*d0�(�.�)/B'r+�-�� "+  N &o %� I� ?!-F!"t!A�!�!4�!c."[�"l�"O[#��#�1$P�$B%HV%�%9�%:�%0&L&k&&"�& �&;�&@'GS'�'+�'0�'0(-G()u(T�(6�(=+)6i)%�)#�)!�)/*><*<{*(�*@�*&"+.I+ x+7�+>�+7,.H,%w,Q�,B�,;2-Un-!�--�- .5.<.#M.�q.//&/SV/A�0�011*1-91Ag13�17�182�N2�2�23q4Q�4��9]a;j�<*>-J>1x>!�>=�>8
+?<C?�?6�?0�?9@:@J@f@�o@3=A$qAd�A=�A�9B,�CE DdfD]�D)EJ;E5�E>�E,�E=(FfF%rF.�F>�F1G%8Gl^G�G-�Ga�GaHFyH��H��J8\L+�LG�L1	M=;M=yM�MN�MTN(mN+�N7�N
+�NO"O=OGIO6�O*�O1�O0%P@VP5�P�P)�PQ
&Q'4Q:\Q8�Q1�Q+R	.R 8RYR,sR�R+�R$�RESTS�[S�Tb�T^U�sU�PV(�V*"W�MW�X��XVkY&�YJ�Y�4Z#�Z7�Z(!["J[m[��[�5]+�];�]4^(P^;y^)�^F�^;&_Ab_O�_>�_�3`a�$a��a)�b�b�b�bb�b4Mcd�c8�cC d@ddE�dF�d42eFge<�e9�e?%fQefY�f3gEg$cg�g �g�g�g�g�g6
+h9AhW{hO�h6#i$Zi,i>�i(�i,j?Aj#�j�j�j#�jk"k@kDQk1�k$�k3�k(!l%Jl>pl#�l>�l;m2Nm�m/�m3�m8n@9nBzn'�n"�nUoA^o"�o/�o6�o(*p5Sp!�p0�p:�p(q@q=Wq.�qF�qBr)Nr$xrL�r$�r1s/AsEqsY�s?t7QtS�t>�t4u"Qutu2�u?�u%v1,v1^v6�v6�v7�v(6wO_w"�w#�w.�w0%x3VxO�xE�x$ yVEy(�y(�yG�yL6z!�z�z>�z%�zU{$r{N�{g�{N|@[|4�|$�|;�|;2}5n}/�}"�}�}~&.~*U~�~�~8�~D�~0%bV�.��!�9�:V���E��-�� � <�]�y�����1�� � �%%�(K�'t�&��+Â'�4�1L� ~�*��8ʃ1�,5�+b���*��9Ԅ+�@:�({�#��7ȅ$�)%�"O�,r�����ˆ)�W�g�]��,�'�#:�.^�!��"��!҈!�<�!S�4u�2��3݉J�1\�M��/܊M�Z�$s�*��>Ë7�?:�Rz�͌U��:�=��=��<�OR�;��<ގ,�4H�1}�#��;ӏ4�JD�G��GאG�Tg�S��F�MW�N��T��CI�D��Qғ/$�RT�O��'��F�$f� ��Q��(���'�$��BҖT�Gj�~��R1���&��'Ø�-�16�+h����m7�:��+��5�0B�Hs����6@�0w�)��>Ҝ2�8D�b}�E��&�9��E�>ƞ�G�/f�0��&ǟ-��$;�)`�!��q��Q�p�.��/��?�#!�!E�g�#����ɢ�d��Od�2��!�
	��
(�@6�w�(��B��=�?��Y���"��7�0æL��$A�.f�"����!ԧA��8�W�%o�?��*ը1�I2�D|�(���4��$.�!S�1u�;���U��MR�_��M�6N�G��-ͬ9��25�.h�>��Y֭m0�F��^�5D�Jz�4ůD�� ?� `�A��ð:ڰP�;f�S��+��2"�(U�'~�2��5ٲ2�]B�`��.�0�N=�����ȴ0ڴ2�E>�����1��2ʵ��!	�#+�(O�x���"��9ζ'�B0�*s�*��+ɷ#��0�%J�p�2��H��V��.T�<����=׹�*!�NL�*��kƺ2�H�1Z���5��ӻ-��8�T�[�o�,��@��0��('�-P�K~�Cʽ;�2J�=}�!��5ݾj�,~�,��
+ؿl�:P�9��3����*�GB�O��]��h8�m��&�76�7n�"��6��1�A2�Pt���&��?	�)I�s�.����'��'��7'�9_�/��7����#5�!Y�{�)��*��)��1�.L�>{�(��@��D$�Di�.��.���M"�6p�6������!�/5�+e�,��2��0��:"�F]�-��0��4� 8�)Y���&��4��5��8(�\a�6��B��.8�7g�#��#��9��/!�5Q�/��1��5��D�3d�������.��G�Ea�4��K��,(�GU�%��'��$��-�->�l���)��B��"�+4�"`���E��)��1�4>�s�>��3��1�6�O�'n���!��.����/�0E�,v�&��*��:��-0�)^�c��\��SI�<��2��/
�;=�6y�%��H���>,�,k�+������)��%�,�M?�k��E��3?� s�L��P�S���j�q������>�y��E~��c��F7r68��g��	j��o��\I$iT���:Ju!�0F���s�znM	B�#��h�V�N*�� )����������w�������N��Ur�7��z���:d�R�;6^S0�xL{������1�����
��I�x�w����������b%v�W����t�$��8�O;u�/{=0���X��5p�Cw�B\��������d8&�m��_}-���tF*���-5yrU_C.P.���#k$v�c��QM��{ ��=l;;2^����l/HgCR��	�+�����1�W��3����'j������k+_���S�){�]��<�f��T��?�(BK��A���6�y��1��`�(�L+
+N|����sI	%(T��:z�b��g�DU�/�����z�q9��'�o�R����E%�`'�C�d���"
+:����"c��V�p>��
+DaPum���@��A�]W�g�Y,��������O������,a)�E�sY�!L�7MN�x�����h��Zj�}��w>L&�"c�9JR�ZiXf�M��*��`�����Of�27�1t9,���P�e�%��\�4*�-rZ
+Gx�K�����H��)a(}�^9�Be��o�!����pQ�3v�_h�5-X8�����F�![2�^|s�WQZ��mhn?�K�k=���~�~H�[��l�q�<
k�3�?&�G�[ea�b�V`@�#��@vo���S����0��=.�Ib�G���n����Y������J~ dl��4���>$����\����5[���n.����/V�EH�i4|,f�}�TQ�G��D�&���@�t<��U����K�p Ae���iY]��qm����#A
�y����?�
D<�X|4'��"O��6�]�3+���J�u��2
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s suggests %s%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one package name argument--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMore than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenVersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open security status notification channelcannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentgenerated corrupt ar header for '%s'header is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file or streamunexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion number does not start with digitversion string has embedded spacesversion string is emptyversioned Provideswait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.22
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:49+0200
+Last-Translator: Iñaki Larrañaga Murgoitio <dooteo@zundan.com>
+Language-Team: Basque <debian-l10n-basque@lists.debian.org>
+Language: eu
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+X-Generator: Lokalize 1.4
+
+ abiarazleen zain dauden paketeak (ebatzi ezin diren edo izan daitezkeenak ):
+
+'%s' konfigurazioko fitxategia ez dago sisteman.
+Konfigurazioko fitxategi berria zuk eskatu bezala instalatzen.
+
+Arazketa-aukerak bit mailako OR logikoarekin konbina daitezke.
+Kontuan hartu esanahiak eta balioak alda daitezkeela.
+
+Erabili 'dpkg' paketeak instalatzeko eta sistematik kentzeko, edo
+'apt' edo 'aptitude' paketeak errazago kudeatzeko. 'dpkg-deb --extract'
+erabiliz deskonprimitutako paketeak gaizki instalatuko dira!
+
+KONTUZ - [!] marka duten aukerak erabiltzeak instalazioa larriki honda dezake.
+[*] marka duten behartzeko aukerak gaituta daude lehenespenez.
+     Instalatu zenetik ez da aldatu.
+     Paketeko bertsioa azken instalazioko bera da.
+     ez da fitxategi arrunta   %.255s
+   Zer egin nahi duzu honekin ?  Aukera hauek dituzu:
+    Y edo I : pakete mantentzailearen bertsioa instalatzea
+    N edo O : instalatuta dagoen bertsioa mantentzea
+      D     : bertsioen arteko ezberdintasunak ikustea
+      Z     : shell-a abiaraztea egoera egoera aztertzeko
+  %.250s (%.250s bertsioa) dago eta %s.
+  %.250s (%.250s bertsioa) instalatu behar da.
+  %.250s %s da.
+  %.250s instalatuta dago, baina bertsioa %.250s da.
+  %.250s ez dago instalatuta.
+  %.250s konfigurazioa kenduko da.
+  %.250s instalatu behar da, baina bertsioa %.250s da.
+  %.250s kendu behar da.
+  %.250s deskonprimituta dago, baina oraindik ez da konfiguratu.
+  %.250s deskonprimituta dago, baina bertsioa %.250s da.
+  %.250s: azken konfiguratutako bertsioa %.250s da.
+  %.250s: %.250s hornitzen du, existitzen da eta %s da.
+  %.250s: %.250s hornitzen du, baina instalatu egin behar da.
+  %.250s: %.250s hornitzen du, baina %s da.
+  %.250s: %.250s hornitzen du, baina konfigurazioa kendu behar da.
+  %.250s: %.250s hornitzen du, baina kendu egin behar da.
+  %s (%s)(e)k %s hornitzen du.
+  -?|--help                           Erakutsi laguntzako mezu hau.
+  --version                          Erakutsi bertsioa.
+
+  %s paketea abiarazlearen prozesuaren zain dago.
+  %s paketea ez dago konfiguratuta oraindik.
+  %s paketea ez dago instalatuta.
+  %s paketea kendu egingo da.
+  %s paketea, %s hornitzen duena, abiarazlearen prozesuaren zain dago.
+  %s paketea, %s hornitzen duena, oraindik ez dago konfiguratuta.
+  %s paketea, %s hornitzen duena, ez dago instalatuta.
+  %s paketea, %s hornitzen duena, kendu egingo da.
+  %s(r)en sistemako bertsioa %s da.
+  Sistemako %s(r)en bertsioa, %s hornituta, %s da.
+  Konfiguratuko den %s(r)en bertsioa %s da.
+ esteka ez dago une honetan estekak unean %s(e)ra darama  %s morroia: %s %7jd byte, %5d lerro   %c  %-20.127s %.127s
+ %d - %s: pakete %d, ondoko sekzioetan: %d pakete, ondoko sekzioetan: %s (%jd byte)
+ %s (%s)(e)k %s apurtzen du eta %s da.
+ %s (ez da fitxategi arrunta)
+ ==> Instalatu zenetik ezabatua (zuk edo script batek).
+ ==> Zuk edo script batek sortutako fitxategia.
+ ==> Pakete-mantentzaileak paketearekin batera hornitutako fitxategia.
+ ==> Lehenespenez konfigurazioko fitxategi zaharra mantentzen.
+ ==> Instalatu zenetik aldatu da (zuk edo script batek).
+ ==> Pakete banatzaileak bertsio eguneratu bat bidali du.
+ ==> Uneko fitxategi zaharra erabiltzen ari da, zuk eskatu bezala.
+ ==> Lehenespenez konfigurazioko fitxategi berria erabiltzen.
+ ==> Fitxategi berri bat erabiltzen ari da, zuk eskatu bezala.
+ %s paketea: zati(ak)  Ekintza lehenetsia bertsio berria instalatzea da.
+ Ekintza lehenetsia instalatuta dagoen bertsioa mantentzea da.
+ eta  honen mendekoa da: espero zen programa %d ez da PATH aldagaian aurkitu
+edo ez da exekutagarria.
+%sespero ziren %d programa ez dira PATH aldagaian aurkitu
+edo ez dira exekutagarriak.
+%sfitxategi edo direktorio %d dago unean instalatuta).
+%d fitxategi edo direktorio daude unean instalatuta).
+Eskatutako kontrol osagai %d falta daEskatutako kontrol %d osagai falta dira%s (azpiprozesua): %s
+%s - %d lehentasuna%s(e)k %s hausten du%s(e)k %s(r)ekin gatazkan dago%s hondatuta dago: %s%s arazketa-aukera, --debug=<zortzitarra> edo -D<zortzitarra>:
+
+ zenbakia iturburu-erref.  azalpena
+%s paketea %s(r)en mendekoa da%s(e)k %s hobetzen du%s behartzeko aukerak - arazoak daudenean portaera kontrolatzeko:
+  abisatu baina jarraitu:  --force-<gauza>,<gauza>,...
+  geldiarazi errorearekin:    --refuse-<gauza>,<gauza>,... | --no-force-<gauza>,...
+ Gauzak behartzea:
+%s ez dago ondo instalatuta; mendekotasunei ez ikusi egingo zaie%s paketea %s(r)en aurremendekoa da%s(e)k %s gomendatzen du%s(e)k %s iradokitzen du%s:
+    Zati-formatuaren bertsioa:   %d.%d
+    Pakete zatia:                %s
+        ... bertsioa:            %s
+        ... arkitektura:            %s
+        ... MD5 kontrol batura:  %s
+        ... luzera:              %jd byte
+        ... zatitu:              %jd bytetik
+    Zati zenbakia:               %d/%d
+    Zati luzera:                 %jd byte
+    Zatiaren desplazamendua:     %jd byte
+    Zati fitxategiaren tamaina
+                  (erabilitako zatia):    %jd byte
+
+%s: '%.250s' konf. fitxategia ez da fitxategi arrunta, ezta esteka sinbolikoa ere (= '%s')%s: badirudi '%.250s' konf. fitxategia fitxategi-izen endekatua dela
+ ('%s' '%s'(r)en esteka sinbolikoa da)%s: '%s' konfigurazioko fitxategia esteka zirkular bat da 
+ (= '%s')%s: mendekotasun arazoak, baina eskatu bezala konfiguratuko da:
+%s%s: mendekotasun arazoak, baina eskatu bezala kenduko da:
+%s%s: mendekotasun arazoak, baina eskatu bezala kenduko da:
+%s%s: errorea sarrera bzip2 korrontearekin lotzean%s: errorea sarrera gzip korrontearekin lotzean%s: errorea irteera bzip2-ren korrontearekin lotzean%s: errorea irteera gzip korrontearekin lotzean%s: huts egin du '%.250s'(e)tik '%.250s'(e)ra estekatzean: %s%s: huts egin du '%.250s' kentzean (gainidatzi aurretik): %s%s: huts egin du '%.250s' ezabatzean: %s%s: huts egin du '%.250s' babeskopia zaharra kentzean : %s%s: huts egin du banatutako '%.250s' bertsio zaharra kentzean: %s%s: huts egin du '%.250s'-tik '%.250s'-ra izena aldatzean: %s%s: bzip2-en irakurketaren barneko errorea%s: bzip2-en irakurketaren barneko errorea: '%s'%s: bzip2-en idazketaren barneko errorea%s: bzip2-en idazketaren barneko errorea: '%s'%s: gzip-en irakurketaren barneko errorea%s: gzip-en irakurketaren barneko errorea: '%s'%s: gzip-en idazketaren barneko errorea%s: gzip-en idazketaren barneko errorea: %s%s: gzip-en idazketaren barneko errorea: '%s'%s: lzma-ren ixtearen errorea%s: lzma-ren errorea: %s%s: lzma-ren irakurketaren errorea%s: lzma-ren idazketaren errorea%s: modu zuzeneko kopiaren errorea: %s%s: ezin da %s ireki hash egiteko: %s%s: ezin da '%s' konfigurazioko fitxategiko esteka irakurri
+ (= '%s'): %s%s: ezin da atzitu '%s' konfigurazioko fitxategia
+ (= '%s'): %s'%.255s': ez dauka '%.255s' kontrol-osagairik'%s'(e)k '%s'(r)ekin gatazkan dago'%s'(e)k erabiltzaileak definitutako '%s' lehentasun-balioa dauka'%s'(e)k ez du baliorik hartzen'%s' eremua, '%.255s' paketearen izen baliogabea: %s'%s' eremua, arkitekturaren izena falta da, edo zaborra dago arkitekturaren izena espero zen lekuan'%s' eremua, paketearen izena falta da, edo zaborra dago paketearen izena espero zen lekuan'%s' eremua, honekiko erreferentzia: '%.255s':
+ '%c' zaharkitua dago; horren ordez, erabili '%c=' edo '%c%c''%s' eremua, honekiko erreferentzia: '%.255s':
+ %c%c bertsioaren erlazio okerra'%s' eremua, honekiko erreferentzia: '%.255s':
+ balio zehatz inplizitua bertsio zenbakian; horren ordez '=' erabiltzea gomendatzen da'%s' eremua, honekiko erreferentzia: '%.255s':
+ bertsioaren balioa alfazenbakizkoa ez den batekin hasten da; zuriune bat gehitzea gomendatzen da'%s' eremua, erreferentzia: '%.255s'; baliogabeko '%.255s' arkitektura-izena: %s'%s' eremua, honekiko erreferentzia: '%.255s': bertsioa osatu gabe'%s' eremua, sintaxi errorea'%.255s' paketearen erreferentziaren ondoren'%s'(e)k balio bat behar du'%s' ez da PATH aldagaian aurkitu edo ez da exekutagarria(Kontuan hartu %s desagertu dela, guztiz ordeztu delako.)
+(Datu-basea irakurtzen ... (azalpena ez dago erabilgarri)(%jd byte guztira)
+, nukleoa iraulita-%c aukerak ez du baliorik hartzen-%c aukerak balio bat hartzen du--%s --pending: ez du hartzen aukerakoa ez den argumenturik--%s --recursive: bide-izenaren argumentu bat behar du gutxienez--%s: .deb fitxategi-izenaren eta direktorioaren argumentuak behar ditu--%s aukerak <izena> behar du--%s aukerak <izena> <bideizena> behar ditu--%s: .deb fitxategi-izen argumentu bat behar du--%s aukerak <direktorio> argumentu bat behar du--%s aukerak <fitxategia> argumentua behar du--%s aukerak argumentu bakar bat behar du--%s: helburu direktorio bat behar du.
+Beharbada dpkg --install erabili nahi zenuen?--%s legezko pakete-izena behar du. '%.250s' ez da; %s--%s: paketearen fitxategiak argumentu bat behar du gutxienez--%s: pakete-izenaren argumentu bat behar du gutxienez--%s aukerak lau argumentu behar ditu--%s aukerak ez du baliorik hartzen--%s aukerak balio bat hartzen du--%s: argumentu zortzitar positibo bat behar du--%s(e)k zati-fitxategiko argumentu bat edo gehiago behar ditu--%s: gehienez pakete-fitxategiko argumentu bakarra behar du--%s: gehienez bi argumentu hartzen ditu--%s: bi argumentu hartzen ditu gutxienez (.deb eta direktorioa)--%s: argumentu bat hartzen du zehazki--%s aukerak bi argumentu hartzen ditu zehazki--%s: ez du argumenturik hartzen--%s aukerak pakete-izena bat hartzen du argumentu gisa--%s: argumentu bat bakarrik hartzen du (.deb fitxategi-izena)--auto: zati fitxategiko argumentu bat behar du zehazki--auto aukerak --output erabiltzea eskatzen du--compare-versions: okerreko erlazioa--compare-versions: hiru argumentu hartzen ditu: <bertsioa> <erlazioa> <bertsioa>--search: fitxategi-izeneko eredu-argumentu bat behar du gutxienez--split: iturburuko fitxategi-izena behar du argumentu gisa--split: iturburuko fitxategi-izen bat eta helburuko aurrizki bat hartzen du gehienez--update eman da baina %s ez dago--update ezin da --remove aukerarekin erabili... badirudi dena ondo joan dela.../%s; nolanahi ere:
+<konprimitua> tar -cf komandoarekin<deb> Debian formatuko artxiboen fitxategi-izena da.
+<cfile> fitxategi-osagai administratiboaren izena da.
+<cfield> 'control' fitxategi nagusiko eremuen izena da.
+
+<deskonprimitu><esteka> eta <bideizena> ezin dira berdina izan<esteka> esteka sinbolikoa da, %s/<izena>-ra zuzentzen duena.
+  (adib. /usr/bin/pager)
+<izena> esteken talde honen izen maisua da.
+  (adib. pager)
+<bideizena> alternatiben helburuko fitxategietariko baten kokalekua da.
+  (adib. /usr/bin/less)
+<lehentasuna> osoko bat da; zenbaki altuko aukerek lehentasun
+altuagoa dute modu automatikoan.
+
+<paketearen egoera eta aurrerapenaren fitxategiaren deskriptorea><errore estandarra><sarrera estandarra><irteera estandarra>'%s' gehitzen
+Baimendu gatazkan dauden paketeak instalatzea%s alternatiboa ez da aldatu %s hautapena ez baitago eskuragarri.Beti instalatu falta diren konfigurazio-fitxategiakErabili beti konfigurazio-fitxategi berriak, ez galdetuErabili beti konfigurazio-fitxategi zaharrak, ez galdetuBeste prozesu batek datu-basea blokeatu du idazteko, eta
+baliteke unean aldaketak egiten egotea. Arazo hauetariko
+batzuen zergatia izan daiteke.
+Arkitektura%s autentifikatzen...
+Komandoak:
+  --add <jabea> <taldea> <modua> <bide-izena>
+                           gehitu <bide-izena> sarrera berria datu-baseari.
+  --remove <fitxategia>          kendu fitxategia datu-basetik.
+  --list [<eredu-globala>]  zerrendatu uneko datu-baseko gainidazketak.
+
+Komandoak:
+  --check-supported                Begiratu exekutatzen ari den dpkg-ek abiarazleak onartzen dituen.
+
+Komandoak:
+  --install <esteka> <izena <bideizena> <lehentasuna>
+    [--slave <esteka> <izena> <bideizena>] ...
+                           gehitu alternatiben talde bat sistemari.
+  --remove <izena> <bideizena>   kendu <bideizena> alternatiben 
+                                        <izena> taldetik.
+  --remove-all <izena>      kendu <izena> taldea sistemako alternatibetik.
+  --auto <izena>               aldatu <izena> esteka maisutik modu
+                                         automatikora.
+  --display <izena>         bistaratu <izena> taldeari buruzko informazioa.
+  --query <izena>           --display <izena> aukeraren bertsio analizagarri
+                                      automatikoa.
+  --list <izena>               bistaratu <izena> taldearen helburu guztiak.
+  --get-selections         zerrendatu alternatiboa nagusien izena eta
+                                   haien egoera.
+  --set-selections         irakurri alternatiboaren egoera sarrera 
+                                   estandarretik.
+  --config <izena>        erakutsi <izena> taldearen alternatiboak eta 
+                                    eskatu erabiltzaileari bat hautatzea erabiltzeko.
+  --set <izena> <bideizena>      ezarri <bideizena> <izena>ren alternatiboa
+                                     gisa.
+  --all                    deitu --config alternatiboa guztietan.
+
+Komandoak:
+  -s|--split <fitxat.> [<aurrizkia>] Artxiboa zatitzen du.
+  -j|--join <zatia> <zatia> ...      Zatiak elkartzen ditu.
+  -I|--info <zatia> ...              Erakutsi zatiaren informazioa.
+  -a|--auto -o <osoa> <zatia>        Metatu automatikoki zatiak.
+  -l|--listq                         Zerrendatu bat ez datozenak.
+  -d|--discard [<fitxategia> ...]    Baztertu bat ez datozenak.
+
+Komandoak:
+  [--add] <file>           gehitu desbiderapen bat.
+  --remove <fitxategia>          kendu desbiderapena.
+  --list [<eredu_orokorra>]  erakutsi fitxategiaren desbiderapena.
+  --listpackage <fitxategia>     erakutsi zer paketek desbideratzen duen fitxategia.
+  --truename <fitxategia>        erakutsi desbideratutako fitxategiaren izena.
+
+--compare-versions: konparazio-eragileak hauek dira:
+ lt le eq ne ge gt               (bertsiorik ezean, tratatu zaharrena balitz bezala);
+ lt-nl le-nl ge-nl gt-nl          (bertsiorik ezean, tratatu berriena balitz bezala);
+ < << <= = >= >> >      (kontrol-fitxategiaren sintaxiarekiko 
+                                        bateragarritasunerako bakarrik).
+
+'%s' konfigurazioko fitxategia
+'%s' konfigurazioko fitxategia (unekoa '%s')
+Edozer pakete konfiguratzeak honi lagun diezaioke%s (%s) konfigurazioa kentzen...
+%s (%s) konfigurazioa kentzen, %s (%s) kendu ahal izateko...
+Debian %s pakete-kudeaketarako programaren %s bertsioa.
+Debian %s paketearen abiarazlearen lanabesaren %s bertsioa.
+Debian %s %s bertsioa.
+'%s' debian pakete-artxiboaren amaierako %s bertsioa.
+Debian '%s' pakete-kudeatzailearen %s bertsioa.
+Debian paketeak zatitu/batzeko '%s' tresna; %s bertsioa.
+%s ezabatu da.
+Mendekotasunak eta gatazkakAzalpenaNahia=Unknown/Install/Remove/Purge/Hold
+| Egoera=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(bat ere ez)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
+Ez landu S/I-ko eragiketa seguruak deskonprimitzeanErroreak aurkitu dira prozesatzean:
+Irteeraren egoera:
+   0 = Ados
+   1 = --auto argumentuarekin, fitxategia ez da zatia
+   2 = arazoak
+'%.250s' fitxategia ez da zati anitzeko artxibo baten zatia.
+Formatuaren sintaxia:
+  Formatua pakete bakoitzarekin erakutsiko den katea da. Formatuak
+  ihes-sekuentzia klasikoak izan ditzake: \n (lerro-jauzia), \r (orga
+  itzulera) edo \\ (alderantzizko barra soila). Pakete-informazioa
+   sartzeko, txertatu aldagai-erreferentzia pakete-eremuetan, ${var[;zabalera]}
+  sintaxiarekin. Eremuak eskuinean lerrokatuko dira, zabalera negatiboa ez 
+  bada. Negatiboa bada, aldiz, ezkerrean lerrokatuko dira.
+Aurrerapenari buruzko informazio lagungarria'%s' partekatutako desbiderapena kentzeko eskaerari ez ikusi egiten.
+Desbideratutako '%2$s' paketearen '%1$s' fitxategia izenez aldatzeko eskaerari ez ikusi egingo zaio
+Pakete %d-i buruzko informazioa eguneratu da.
+%d paketeri buruzko informazioa eguneratu da.
+Amaigabeko jarioaInstalatu paketea nahiz eta bere autentifikazioaren egiaztapenak huts eginInstalatu nahi eta beste paketeren bat honda dezakeen%s konfigurazioko fitxategiaren bertsio berria instalatzen...
+Mantentzailearen script-aren deia eta egoeraFitxategi baztergarri batzuk biltegi-direktorioan utzi dira:
+'%s' uzten
+Mendekotasunen/gatazken irteera xeheadpkg/info direktorioari buruzko azalpen luzeakProzesatutako konfigurazio-fitxategi bakoitzaren irteera xeheaProzesatutako fitxategi bakoitzaren irteera xeheaFalta diren abiarazleen irteera xehea%s paketearen kopia bat baino gehiago deskonprimitu da
+ exekuzio honetan!  Behin bakarrik konfiguratuko da.
+IzenaEz dago '%s' desbiderapenik, ez da ezabatuko
+Oharra: supererabiltzailearen PATHak honakoak izan ohi ditu:
+/usr/local/sbin, /usr/sbin eta /sbinEzer ez konfiguratzeko.Eskaini konfigurazio-fitxategiak berriak ez diren bertsioekin ordezteaAukerak:
+  --admindir=<direktorioa>      Erabili <direktorioa> %s(r)en ordez.
+  --by-package=<paketea>     Gainidatzi abiarazle itxoinlaria
+                                                (normalean dpkg-ek ezarrita).
+  --await                                   Paketeak prozesatzearen zain egon behar du.
+  --no-await                              Ez dago paketerik prozesuaren zain dagoenik
+  --no-act                                 Probatu bakarrik, ez ezer aldatu.
+
+Aukerak:
+   --depotdir <direktorioa>        <direktorioa> erabili %s/%s ordez
+  -S|--partsize <tamaina>          KiB-tan, '-s'rekin (lehenetsia: 450)
+  -o|--output <fitxategia>          Fitxategi-izena, '-j'rekin (lehenetsia:
+                                                 <paket>_<berts>_<arki>.deb)
+  -Q|--npquiet                            Ez erakutsi ezer -a zatia ez denean
+  --msdos                                  Sortu 8.3 fitxategi-izenak
+
+Prozesatutako konfigurazio-fitxategi bakoitzaren irteeraProzesatutako fitxategi bakoitzaren irteeraGainidatzi fitxategi desbideratu bat desbideratu gabeko bertsio batekinGainidatzi pakete bateko fitxategia beste batekinGainidatzi pakete baten direktorioa beste baten fitxategiekinPATH-ek programa garrantzitsuak falta ditu, arazoak litekeenaPATH ez da ezarri%s paketea mantenduta dago, ez da ukituko.  Erabili --force-hold
+gainidazteko
+%s paketea behin baino gehiagotan azaltzen da, baina behin bakarrik prozesatuko da.
+'%s' paketeak ez dauka fitxategirik (!)
+Paketeak oraindik ez dira muntatu berriro:
+%2$s paketearen %1$d zati-fitxategian (oraindik falta: Bide-izena'Pre-Depends' eremua%s deskonprimitzeko prestatzen...
+LehentasunaProzesatu bahi eta paketeak okerrekoak edo arkitekturarik gabekoak izanProzesatu paketeak nahiz eta okerreko bertsiokoak izan%s (%s)-(r)en abiarazleak prozesatzen ...
+Prozesua geldiarazi da errore gehiegi zeudelako.
+%s (%s): konfigurazio-fitxategiak purgatzen ...
+%s paketea batzen zati %detik: %s paketea batzen %d zatitatik: %s(r)i buruzko informazioa erregistratu da %s(e)tik.
+Kendu funtsezko pakete batKendu instalatzea eskatzen duten paketeak%s (%s) kentzen...
+'%s' kentzen
+Ordeztu paketea bertsio baxuago batekinInstalatutako %s (%s) paketeko fitxategiekin ordeztuta...
+Pakete erabilgarrien informazioa ordezten, %s erabiliz.
+%s (%s) pakete zaharreko fitxategiak ordezten...
+Aurrez desautatutako %s paketea hautatzen.
+HautapenaEzarri behartzeko aukera guztiak%s (%s) konfiguratzen...
+Falta diren abiarazleen irteera kopuru urriaSaltatu lerro baliogabea: %sUtzi alde batera %s alternatiboa ezezaguna.Desautatutako %s paketea saltatzen.
+'%s' paketea zati %d-ean zatitzen:'%s' paketea %d-tan zati zatitzen:EgoeraHonako paketeak beste paketeek aktibatutako abiarazleen
+prozesuen zain daude. Prozesu hauek eskatzeko erabili 
+dselect edo dpkg --configure --pending (edo dpkg --triggers-only):
+Pakete hauek gaizki daude, instalazioan zehar arazo larriak egon
+direlako. Berriro instalatu behar dira (eta beren mende dauden
+pakete guztiak) ondo lan egiteko:
+Pakete hauek zerrendaren kontrol-fitxategia falta zaie
+datu-basean. Berriro instalatu behar dira:
+Pakete hauek md5sums kontrol-fitxategia falta zaie
+datu-basean. Berriro instalatu behar dira:
+Pakete hauek ez daude guztiz konfiguratuta, beharbada konfiguratu ziren
+lehenengo aldian arazoak egon zirelako. Saiatu berriro konfiguratzen
+dpkg --configure <paketea> erabiliz edo configure menu-aukerarekin
+dselect-en:
+Pakete hauek ez daude guztiz konfiguratuta, instalazioan zehar arazoak
+egon direlako. Saiatu berriro instalatzen; paketeak kentzeko, erabili
+dselect edo dpkg --remove:
+Pakete hauek ez daukate arkitekturarik:
+Pakete hauek arkitektura ilegala daukate:
+Pakete hauek kanpoko arkitektura ezezaguna daukate, 
+mendekotasun arloko arazoak sor daitezke interfazetan.
+'dpkg --add-architecture' komandoarekin kanpoko
+arkitektura erregistratuz konpon daiteke:
+Honako paketeak abiarazi diren arren, abiarazlearen prozesua
+ez da oraindik amaitu. Abiarazlearen prozesua eskatzeko erabili 
+dselect edo dpkg --configure --pending (edo dpkg --triggers-only):
+Pakete hauek deskonprimitu dira, baina oraindik ez dira konfiguratu.
+Konfiguratzeko, erabili dpkg --configure edo configure menu-aukera
+dselect-en:
+Aukera %d dago %s ordezteko (%s hornituz).%d aukera daude %s ordezteko (%s hornituz).Ez dago %s hornitzen duen programarik.alternatiboa bat bakarrik dago %s esteken taldean (%s hornitzen duena): %sSoftware hau librea da; kopiatzeko baldintzen berri izateko, ikus
+GNU Lizentzia Publiko Orokorraren 2 bertsioa edo berriagoa.
+EZ dago bermerik.
+Abiarazi aktibatzea eta prozesatzeaSaiatu gauzak (des)instalatzen nahiz eta 'root' ez izanBihurtu mendekotasun-arazo guztiak abisuBihurtu mendekotasun-arazoak abisuIdatzi 'exit' amaitutakoan.
+Idatzi dpkg --help paketeak instalatu eta desinstalatzeko laguntza lortzeko [*];
+Erabili 'apt' edo 'aptitude' paketeak errazago kudeatzeko.
+Idatzi dpkg -Dhelp dpkg arazketa-banderen balioen zerrenda ikusteko;
+Idatzi dpkg --force-help behartzeko aukeren zerrenda lortzeko;
+Idatzi dpkg-deb --help *.deb fitxategiak eraldatzeko laguntza lortzeko;
+
+[*] markatutako aukerek emaitza handia dute - iragazi 'less' edo 'more' erabiliz.Idatzi dpkg-deb --help *.deb fitxategiak manipulatzeko laguntza lortzeko;
+Idatzi dpkg --help paketeak instalatu eta desinstalatzeko laguntza lortzeko.Idatzi dpkg-split --help laguntza lortzeko.Idatzi dpkg-trigger --help lanabes honen laguntza lortzeko.%s (%s) deskonprimitzen...
+%s (%s) deskonprimitzen (%s) gainean...
+Pakete erabilgarrien informazioa eguneratzen, %s erabiliz.
+Erabilera: %s [<aukera> ...] <komandoa>
+
+Erabili '%s --help' programaren erabilerari buruzko laguntza lortzeko.Erabili 'apt' edo 'aptitude' paketeak errazago kudeatzeko.
+Erabili --help fitxategi desbideratuei buruzko laguntza lortzeko.Erabili --help fitxategia gainidaztearen egoerari buruzko informazioa lortzeko.Erabili --help paketeen kontsultari buruzko laguntza lortzeko.Erabili konfigurazio-fitxategi berrien aukera lehenetsiak
+bat erabilgarri egonez gero, ez galdetu. Ezin bada lehenetsirik
+aurkitu, galdetu egingo zaizu, konfigurazio zaharraren edo
+berriaren aukeretariko bat ematen denean izan ezikBertsioadpkg-en bertsioa %s euskarriarekin ez dago oraindik konfiguratuta.
+Erabili 'dpkg --configure dpkg', eta ondoren saiatu berriro.
+Gehitzean, lehenetsia --local eta --divert <jatorrizko>.distrib da.
+Kentzean, --package edo --local eta --divert pareko izan behar dira zehazten bada.
+Pakete preinst/postrm script-ak beti zehaztu behar dituzte --package eta --divert.
+%s (%s) kendu edo purgatuko litzateke...
+[lehenetsia=N][lehenetsia=Y][lehenespenik ez]administratze-direktorioa instalazio-direktorioaren barruan egon behar du dpkg ongi funtzionatzeko'%s' ere konfiguratzen ari da (honek behar du: '%s')%s(r)en alternatiboa (esteken %s taldearen zati) ez da existitzen. Alternatiben zerrendatik kentzen.%s alternatiboa ezin da nagusia izan: %s(r)en morroia da%s alternatiboa ezin da %s(r)en morroia izan: maisu alternatiboa da%s alternatiboa ezin da %s(r)en morroia izan: %s(r)en morroia da%2$s(r)en %1$s alternatiboa ez dago erregistratuta, ez da kentzen ari%2$s(r)en %1$s alternatiboa ez dago erregistratuta, ez da ezartzen ari%s esteka alternatiboa dagoeneko %s(e)k kudeatzen du%s esteka alternatiboa dagoeneko %s(e)k kudeatzen du (%s(r)en morroia)esteka alternatiboa ez da absolutua eta izan beharko zen: %sizen alternatiboak (%s) ezin du ez '/' ez zuriunerik izanbide-izen alternatiboa ez da absolutua eta izan beharko zen: %s'%s' paketearen izena anbiguoa da instalatutako instantzia bat baino gehiagorekin'%s'(r)en gainidazketa badago dagoeneko, baina --force ezarri denez, ez ikusi egingo zaio'%s'(r)en gainidazketa badago dagoeneko, abortatzen%s(r)en edozein desbiderapena%s(r)en edozein desbiderapen %s(e)raar '%s' kide-izena luzeegia daar kidearen %jd tamaina luzeegia<hutsik><bat ere ez><ezezaguna>'%s' arkitektura ilegala da: %s'%s' arkitektura erreserbatuta dago eta ezin da gehitu'%.250s' artxiboak bi kontrol-kide dauzka, utzi egingo da'%s' artxiboak uste baino lehenago dauka %.*s kidea '%s' baino lehenago, utzi egingo da'%s' artxiboak konpresio ezezaguna darabil '%.*s' kidearentzako, utzi egingo daartxiboko '%.255s' objektua mota ezezagunekoa da: 0x%xartxiboaren kontrol-kidearen tamainaartxiboak baliogabeko formatu-bertsio du: %sartxiboak gaizki osatutako '%s' kontrol-kidearen tamaina daukaartxiboak ez du lerro-jauzirik goiburuanartxiboaren informazioaren goiburuaren kideaartxiboaren formatu-bertsioa %d.%d da, lortu dpkg-deb berriagoaartxiboaren bertsio-zenbaki magikoaartxiboaren kidearen goiburuaartxiboaren zatiaren zenbakiakartxiboaren zatiaren desplazamenduaartxiboaren zatien zenbakiaartxiboaren guztirako tamainamodu automatikoa%s/%s-(r)en eguneraketa automatikoak desgaituta daude, ez da ukitukobeste pakete baten abiarazlearen prozesuaren zainlerro hutsa '%.*s' eremuaren balioanhautsita kentzean edo instalatzen huts egin duelakohautsita postinst-en hutsegitea dela etaezin da %s aukera ezezaguna instalatuezin da '%.255s' paketearen informazio fitxategian 'mmap' eginezin da postrm script zaharra kenduezin da '%.255s' paketearen informazio fitxategian 'stat' eginezin zaio ar-eko kide-fitxategia (%s) '%s'(e)ri erantsi: %sezin da paketearen '%s' zatia '%s'(r)i erantsi: %sezin zaio '%s'(r)i erantsiezin da deskonprimitzailearen kanalizazioa itxiezin da '%s' fitxategiaren MD5 hash-a kalkulatu: %sezin da '%.255s' tar artxiboaren MD5 hasha kalkulatu: %sezin da byte anitzeko '%s' sekuentzia karaktere zabalera bihurtuezin da byte anitzeko '%s' katea karaktere zabaleko katera bihurtuezin da '%s' kopiatu '%s' artxiboan: %sezin da '%s' kopiatu '%s' gisa: %sezin da artxiboaren kidea '%s'(e)ndik deskonprimitzailearen kanalizaziora kopiatu: %sezin da '%.255s'(r)en erauzitako datuak '%.255s'(e)ra kopiatu: %sezin dira direktorioak desbideratuezin da '%s' fitxategia bere burura desbideratuezin da '%s' kontrol-fitxategia erauzi '%s'(e)ndik: %sezin da paketearen '%s' zatia erauzi: %sezin da segurtasunaren etiketatzearen kudeaketa lortuezin da '%.255s' ireki ('%.255s')ezin da '%.250s' artxiboko zati-fitxategia irekiezin da segurtasun-egoeraren jakinarazpenaren kanala irekiezin da informazio-direktorioan irakurriezin da '%.250s' kenduezin da '%s' arkitektura kendu datu-baseak unean darabilelakoezin da kanpokoa ez den '%s' arkitektura kenduezin da '%.250s' babeskopiako konf. fitxategi zaharra kendu ('%.250s')ezin da '%.250s' konfigurazio-fitxategi zaharra kendu (= '%.250s')ezin da fitxategi zaharren zerrenda kenduezin da '%s' izenez '%s'(e)ra aldatu%.250s: ezin dira aurremendekotasunak bete (hau dela eta behar dira: %.250s)ezin da '%.255s' direktorioa aztertuezin da '%.255s' eguneratzeen direktorioa aztertuezin da ikusi nola bete aurremendekotasuna:
+ %sezin da '%s' fitxategi-objektuaren segurtasunaren testuingurua ezarriezin da segurtasunaren exekuzioaren testuingurua ezarri mantentzailearen script-arentzakoezin da artxiboaren kontrol-kidea alde batera utzi '%s'(e)n: %sezin da artxiboaren kidea alde batera utzi '%s'(e)n: %sezin da '%.255s' fitxategia (ordeztuta edo baztertuta?) kanalizaziotik saihestu: %sezin da '%.255s' fitxategiaren betegarria alde batera utzi: %sezin da '%s' pakete-goiburuaren zatiketa saltatu: %sezin da '%.255s' atzitu ('%.255s')ezin da '%s' fitxategia atzitukendu amaierako zero posibleak 'dpkg-deb'-etik: %s'%c' karakterea ez da onartzen (letrak, digituak eta %s soilik)konprimitutako datuak hondatuta daude'%.250s' konf. fitxategia ez da paketean azaltzen'%.250s' konfigurazioko fitxategia ezin da atzitu'%s' konfigurazioko fitxategia ez da fitxategi arruntakonfigurazio-fitxategiaren diferentzien bistaratzailea'%s' konfigurazioko fitxategiak amaieran zuriuneak ditu%s konf. fitxategi-izena bikoiztuta dago'%s' konf. fitxategiaren izena luzeegia da, edo amaierako lerro-jauzia falta dukonfigurazio-fitxategiaren shell-akonfigurazioaren errorea: %s:%d: %sekintza gatazkatsuak -%c (--%s) eta -%c (--%s)desbideratze gatazkatsuak: '%.250s' edo '%.250s'gatazkan dauden paketeak - %.250s ez da instalatuko%s(r)en konfigurazioa kentzea kontutan hartzen, zeinek %s(e)k honda dezakeen...funtsezko %s paketearen konfigurazioa kentzea
+aztertzen, %s gaitzeko.%s kentzea aztertzen, %s jartzeko...kontrol-direktorioak okerreko baimenak ditu: %03lo (>=0755 eta <=0775 izan behar dute)kontrol-direktorioa ez da direktorio bat'%s' kontrol-fitxategia ez da existitzen'%2$s' paketearen '%1$s' kontrol-fitxategiak fitxategi-izen hutsa dauka'%2$s' paketearen '%1$s' kontrol-fitxategiak amaierako lerro-jauzia falta dukontrol-fitxategiak hau dauka: %ckontrolaren kideainformazioaren datu-basearen '%s' formatu-fitxategia hondatutaezin izan da '%s' egunkaria ireki: %sezin izan da '%.250s' fitxategi zaharraren egoera eskuratu, beraz ez da ezabatuko: %sezin izan da '%i' ireki korronterakouneko %s alternatiboa ezezaguna da, %s(e)ra aldatzen %s esteken taldearentzakozikloa aurkitua abiarazleen prozesuan:
+ erantzule diren edo izan daitezkeen abiarazleen paketeen katea:datuen kideamendekotasun arazoak - prozesatu gabeko abiarazleak uzten ari damendekotasun arazoak - konfiguratu gabe uzten ari damendekotasun arazoak - ez da kendukoezin da %s konfiguratu, mendekotasun arazoak direla eta:
+%sezin da %s konfiguratu, mendekotasun arazoak direla eta:
+%smendekotasun arazoak direla eta, ezin da %s kendu:
+%s%s (%s) morroiaren esteka zaharkitua baztertzen%s(e)k hemendik desbideratuta: %s
+%s(e)k hona desbideratuta: %s
+%s %s(e)k desbideratuta%3$s(e)k %1$s desbideratu du %2$s(e)ra'divert-to'-k ezin du lerro-jauzirik eduki%s(e)k hona desbideratuta: %s
+eginda
+%.250s aurreko bertsiora itzultzen, %.250s-tik %.250s-rabadirudi dpkg ez dagoela instalatuta, ezin da bilatu %s euskarria !
+espero zen '%.255s' abiarazle paketea bikoiztutabikoiztutako abiarazlearen intereseko fitxategia '%.250s' fitxategi-izena eta'%.250s' paketearekin%s bide-izena bikoiztutabikoizturiko burutu gabeko '%.255s' abiarazlea%s morroiaren esteka bikoiztutabikoiztutako %s morroiabalio bikoiztua '%s' eremuanbalio bikoiztua erabiltzaileak definitutako '%.*s' eremuaneremuaren izena hutsikfgets: kate huts bat bidali du konfigurazioko fitxategiak irakurtzeanizen hutsa duten abiarazleak ez dira onartzenarobertsioko aroa negatiboa dabertsioko aroa ez da zenbaki batbertsioko aroa handiegia daerroreaerrorea '%s' egiaztatzeanerrorea %.250s ixteanerrorea '%.255s' konfigurazioko fitxategia ixteanerrorea '%.255s' ixtean/idazteanerrorea '%.255s' gailua sortzeanerrorea '%.255s' direktorioa sortzeanerrorea '%.255s' esteka gogorra sortzeanerrorea '%s' babeskopia berria sortzeanerrorea '%.255s' kanalizazioa sortzeanerrorea '%.255s' esteka sinbolikoa sortzeanerrorea '%.250s' ez dagoela ziurtatzeanerrorea '%s' lotura exekutatzean, irteerako %d kodeaerrorea kateari formatua ematean varbuf aldagaianerrorea erakusteko formatuan: %serrorea '%s' fitxategi berria instalatzeanerrorea konfigurazioko fitxategien fitxategia irekitzeanerrorea '%.255s' konfigurazioko fitxategia ixteanerrorea %s artxiboa prozesatzean (--%s):
+ %serrorea %s paketea prozesatzean (--%s):
+ %serrorea %.250s irakurtzeanerrorea %s irakurtzean %.255s fitxategitikerrorea konfigurazioko fitxategien fitxategia irakurtzeanerrorea dpkg-deb kanalizaziotik irakurtzeanerrorea baztertutako abiarazleen '%.250s' fitxategia irakurtzeanerrorea '%s' babeskopia zaharra kentzeanerrorea jabetza ezartzean: '%.255s'errorea '%.255s' esteka sinbolikoaren jabetza ezartzeanerrorea baimenak ezartzean: '%.255s'errorea data-zigiluak ezartzean: '%.255s'errorea %.250s irekitzen saiatzeanerrorea %s seinalea harrapatu ez delako: %s
+errorea '%s' idazteanerrorea '%s' idazteanerrorea '%s'(e)n idazteanerrorea arkitekturaren zerrendan idazteanerrorea stderr-en idaztean, konfigurazioko fitxategiaren gonbitaren aurretik aurkitu dahuts egin du memoria esleitzeanezin izan da memoriarik esleitu huts egindako paketeen zerrendan sarrera berria gehitzeko: %shuts egin du '%.255s' direktoriora aldatzeanhuts egin du direktoriora chdir egitean%.250s: huts egin du chroot egiteanhuts egin du irakurri ondoren ixtean: '%.255s'huts egin du direktorioa sortzeanhuts egin du kanalizazioa sortzeanfd %d: huts egin du 'dup' egiteanstd%s: huts egin du 'dup' egiteanhuts egin du ar-en fitxategiaren kideari (%s) fstat lantzeanfstat: huts egin du artxiboarekinfstat-ek huts egin du desbideratzeen fitxategiarekinfstat-ek huts egin du statoverride fitxategiarekinhuts egin du aldi baterako fitxategia sortzean (%s)huts egin du '%.255s' konfigurazioko fitxategia irekitzean irakurtzeko: %shuts egin du desbideratzeen fitxategia irekitzeanhuts egin du '%.255s' paketearen informazio fitxategia irekitzean irakurtzekohuts egin du statoverride fitxategia irekitzeanhuts egin du abiarazlearen intereseko '%.250s' zerrenda-fitxategia irekitzeanhuts egin du irakurtzeanezin da '%.255s' irakurri ('%.255s')huts egin du '%.255s' artxiboa irakurtzeanhuts egin du %.255s eguneratze fitxategi inkorporatua kentzeanhuts egin du nire %.255s eguneratze fitxategia kentzeanhuts egin du aldi baterako fitxategiaren hasierara joatean (%s)huts egin du abiarazlearen intereseko '%.250s' zerrenda-fitxategia berrirakurtzeanhuts egin du bilatzeanhuts egin du '%.250s' esteka sinbolikoaren egoera eskuratzean (erreferentzia kenduta)huts egin du proposatutako (erreferentzia kenduta) helburuko '%.250s' esteka sinbolikoaren egoera eskuratzean '%.250s' estekarentzakohuts egin du aldi baterako (%s) fitxategiaren egoera lantzeanhuts egin du aldi baterako fitxategia desestekatzean (%s), %shuts egin du idazteanhuts egin du %s datu-basearen erregistroa '%.50s'(r)i buruz idaztean - '%.250s'huts egin du '%.50s'(r)en xehetasunak '%.250s'(e)n idazteanhuts egin du fitxategi-izena tar kanalizazioan idaztean (%s)fgets-ek kate huts bat eman du'%.250s'(e)tik'%.*s' eremuaren izena ezin da marratxo batekin hasi'%.*s' eremu izenaren ondoren bi puntu behar diraeremuaren zabalera barrutitik kanpo'%.250s' fitxategiak baliogabeko formatu-bertsioa dauka: %s'%.250s' fitxategia hondatuta dago - %.250s falta da'%.250s' fitxategia hondatuta dago - okerreko MD5 kontrol-batura: '%.250s''%.250s' fitxategia hondatuta dago - artxiboaren goiburu magikoa okerra'%.250s' fitxategia hondatuta dago - okerreko artxiboaren zati zenbakia'%.250s' fitxategia hondatuta dago - okerreko digitua (%d kodea) %s(e)n'%.250s' fitxategia hondatuta dago - okerreko "magic" lehenengo goiburuaren amaieran'%.250s' fitxategia hondatuta dago - okerreko "magic" bigarren goiburuaren amaieran'%.250s' fitxategia hondatuta dago - okerreko artxiboaren zati kopurua'%.250s' fitxategia hondatuta dago - okerreko karaktere betegarria (%d kodea)'%.250s' fitxategia hondatuta dago - %.250s(r)en ondoren lerro-jauzia falta da'%.250s' fitxategia hondatuta dago - barrarik ez artxiboaren zatien zenbakien artean'%.250s' fitxategia hondatuta dago - nuluak informazioaren sekzioan'%.250s' fitxategia hondatuta dago - bigarren kidea ez da datu-kidea'%.250s' fitxategia hondatuta dago - okerreko tamaina adierazitako zati zenbakian'%.250s' fitxategia hondatuta dago - laburregia'%.250s' fitxategia hondatuta dago - okerreko zati kopurua adierazitako tamainetan'%.250s' fitxategiaren formatu-bertsioa %d.%d da; eskuratu dpkg-split berriagoa'%.250s' fitxategia ez da artxibo-zatia'%s' fitxategia hondatuta dago: zenbaki osokoa barrutitik kanpo %s(e)n'%s' fitxategia ez da artxibo-zatia
+fitxategi-formatua ez da ezagunabadirudi fitxategia ASCII moduan deskargatu delako 
+ hondatu den artxibo bat delafitxategiak ezin du lerro-jauzirik edukiabiarazleen fitxategiaren erregistroak legez kanpoko '%.250s' pakete-izena aipatzen du ('%.250s' fitxategiaren interesentzat): %.250s"%s" fitxategi-izena ez da absolutua'%.250s' eta '%.250s' fitxategiak ez dira fitxategi beraren zatiak'%.250s' paketearen fitxategi-zerrendaren fitxategiak fitxategiek izen hutsa daukate'%.250s' paketearen fitxategi-zerrendak amaierako lerro-jauzia falta du'%.250s' paketearen fitxategi-zerrendaren fitxategiak falta dira, paketeak ez duela fitxategirik instalatuta ondorioztatuko da%s alternatiboaren berrinstalazioa behartzen, %s esteken taldea hautsita dagoelakohuts egin du sardetzeanzaborra formatuaren bertsioren ondorenformatuaren bertsioak ez dauka punturikformatuaren bertsio-zenbakiaformatuaren bertsioa osagai nagusi hutsarekinformatuaren bertsioa osagai lagungarri hutsarekin'%s'(r)en ar-en goiburua hondatuta sortu dagoiburua luzeegia da, zatia luzeegia eginez: paketearen izena edo
+bertsioaren zenbakia ikaragarri luzea edo horrelako zerbait izan beharko du; bertan behera uztenkontrol-fitxategiei buruzko abisu %d-i ez ikusi egitenkontrol-fitxategiei buruzko %d abisuei ez ikusi egitenapurketari ezikusi egin zaio, hala ere aurrera jarraitzen!gatazkari ezikusi egin zaio, jarrai daiteke%s(r)en mendekotasunaren arazoari ezikusia egiten:
+%saurremendekotasun arazoari ez ikusi egingo zaio!%.250s kentzeko eskaerari ez ikusi egingo zaio, ez dagoelako instalatuta%.250s kentzeko eskaerari ezikusi egingo zaio, konf.
+ fitxategiak bakarrik daudelako sisteman. Erabili --purge horiek ere kentzeko.legez kanpoko arkitektura-izena '%s:%s' ezarpenean: %szain zegoen '%.250s' pakete-izen ilegala: %.250spakete-izen baliogabea %d lerroan: %.250slegez kanpoko pakete izena espero zen '%.255s' abiarazlean: %slegez kanpoko pakete-izena '%s%s%s' ezarpenean: %slegez kanpoko burutu gabeko '%.255s' abiarazle-izena: %sinformazioaren datu-basearen formatua (%d) akastuna edo berriegia da: saiatu dpkg berrigoa lortzeninformazioaren %s/%s fitxategia ez dago inolako paketerekin esleituta%.250s instalatzeainstalatuta%.250s instalatzeak %.250s apur dezake, eta
+ ez da baimentzen konfigurazioa kentzea (--auto-deconfigure lagungarri izan daiteke)%.250s instalatzeak instalatuta dagoen softwarea apurtu dezakebarneko errorea (akatsa)Baliogabeko '%c' karakterea artxiboren '%.250s' kidean (tamaina: %.16s)baliogabeko '%c' karakterea eremuaren zabalerankaraktere baliogabea gainbegiraketaren zenbakiankaraktere baliogabea bertsio zenbakian-%c aukeraren konpresio-maila baliogabea: %ldkonpresio-maila baliogabea: %sbaliogabeko deb formatu-bertsioa: %s-%c aukeraren osokoa baliogabea: '%.250s'baliogabeko osokoa --%s: '%.250s''%.250s' abiarazlearen izenak sintaxi baliogabea edo ezezaguna du ('%.250s' paketearen abiarazlearen interesetan)'%.250s' paketearen izen baliogabea baztertutako abiarazleen '%.250s' fitxategianegoera baliogabea'%.250s' abiarazlearen izen baliogabea: %.250slerroa ez dago amaituta %s irakurtzen saiatzeanlerroa luzeegia da edo ez dago amaituta %s irakurtzen saiatzean%s esteka bai nagusi bai morroia dadesbideratze lokala hemendik: %s
+'%s'(r)en desbiderapen lokala'%s' lokalki hona desbideratuta: %slokalki hona desbideratuta: %s
+lokalki hona desbideratuta: %s
+fitxategi-izen luzeakmantentzailearen '%.50s' script-ak okerreko baimenak ditu: %03lo (>=0555 eta <=0775 izan behar dute)mantentzailearen '%.50s' script-a ez da fitxategi arrunta edo esteka sinbolikoamantentzailearen '%.50s' script-ean ezin da atzitumalloc-ek huts egin du (%zu byte)eskuzko moduafitxategi maisuaesteka maisuabeharbada arazoak egongo dira %s kentzeko, %s hornitzen baitu...baliteke kate hutsa ez izateamemoriaren erabilpenaren mugara iritsitaparekatze okerra "divert-to"-n
+  '%s' ezabatzean
+  '%s' aurkitu daparekatze okerra paketean
+  '%s' ezabatzean
+  '%s' aurkitu daitxierako giltza falta dabatera instala daitekeen eta ezin daitekeen paketeen nahasketaren instantziak aurkitu dira; baliteke dpkg ez-ofizial baten bertsio-berritze baten ondorioz gertatzeaarkitektura anitzekoahainbat 'Conflicts' eta 'Replaces'batera instala ezin diren pakete anitzen instantziak aurkitu dira; baliteke dpkg ez-ofizial baten bertsio-berritze baten ondorioz gertatzeahainbat statoverrides daude '%.250s' fitxategianmantentzailearen script batek deitu behar dio (edo --by-package aukerarekin)alfazenbakizko batekin hasi behar dualfazenbakizko karaktere batekin hasi behar du%s izena bai nagusi bai morroia daekintza-aukera bat behar dalerro-jauzia '%.*s' eremu izeneanupdate-alternatives fitxategiak (%s) ezin du lerro-jauzirik edukiez dago %s(r)en alternatiborikez dago gainidazketarikpaketearen informaziorik ez: '%.255s''%s' izeneko paketerik ez dago instalatuta, ezin da konfiguratuez dago honekin bat datorren paketerik: %sez da %s ereduarekin bat datorren biderik aurkituez, %s funtsezkoa da, ez da konfigurazioa kenduko
+ %s gaitu ahal izateko.ez, ezin da %s(r)ekin aurrera jarraitu (ikus --auto-deconfigure):
+%sez da kontrol-arearen edukia egiaztatukoinstalatu gabeez dago instalatuta baina konfigurazioa gelditzen daez da %s kenduko ez baita esteka batez da %s esteka batekin ordeztukoez dago ezer bi puntuen ondoren bertsio zenbakianpakete-izen nulua --%s komaz bereizitako '%.250s' zerrendanartxiboaren zati kopurua'--%s' aukera zaharkitua, eskura ezin daitezkeen paketeak automatikoki garbituko dira'%.250s' konf. fitxategi zaharra direktorio huts bat da (eta ezabatu egin da)'%.250s' fitxategi zaharra zenbait fitxategi berrien berdina da (bai '%.250s' eta bai '%.250s')pakete-bertsio zaharreko inf. fitxategiak izen luzeegia du;'%.250s' hasten dabertsio zehatzak bakarrik erabil daitezke '%s' eremuanhuts egin du '%.255s' osagaia irekitzean (%.255s), espero ez zen moduanmemoriarik ez garbiketa-sarrera berriarentzatmemoriarik ez argumentu ugaridun garbiketa-sarrerarentzatmemoriarik ez errorearen testuinguru berriarentzatgainidazteko arazoa --force gaituta dagoelako:%.250s paketea instalatuta eta konfiguratuta dago lehendik ere%.250s paketea ez dago prest konfiguratzeko
+ ezin da konfiguratu (uneko egoera: '%.250s')%.250s paketea ez dago prest abiarazlearen prozesurako
+ (uneko egoera: '%.250s' eta ez da abiarazlerik falta)ezin da %s %s paketea konfiguratu %s beste bertsio batekoa (%s) delako%2$s paketea konfiguratzeko prest ez dagoenez  ezin da %1$s konfiguratu (uneko egoera: '%3$s')%s paketeak zerrenda informazio-fitxategi gisa zeukan%s paketea berriro instalatu behar da, baina kendu egingo da eskatu bezala%s paketea berriro instalatu behar da, ez da kenduko%s paketea mantenduta zegoen, baina zuk eskatu bezala prozesatuko da'%s' paketea ez dago erabilgarri'%s' paketea ez dago instalatuta'%s' paketea ez dago instalatuta, eta ez dago inf. erabilgarririkpaketearen arkitekturapaketearen arkitektura (%s) ez dator bat sistemarekin (%s)paketeak kontroleko informazio-fitxategi izen luzeegia dauka ('%.50s' hasten da)paketearen kontrol informazioak '%.250s' direktorioa zeukan'%.250s' rmdir paketearen kontrol-informazioak ez du esaten direktorio bat ez denikpaketearen kontrol-informazioaren erauzketapaketeak beste batzuk hona desbideratzen ditu: %s
+paketearen eremuaren balioaren erauzketapakete fitxategiaren MD5 kontrol-baturapaketearen fitxategi-sistemaren artxiboa erauzketapaketeak %s egoera zuen baina abiarazleak espero dirapaketeak %s egoera du baina abiarazleak falta dirapaketearen egoera inkoherentea da, berriro instalatu beharko
+ zenuke, kentzen saiatu aurretikPaketearen egoera inkoherentea da; berriro instalatu
+ behar duzu, konfiguratzen saiatu aurretik.paketeak ezin du lerro-jauzirik berririk edukipakete-izenapakete-izenak minuskula alfazenbakizkoak edo '-+.' ez diren karaktereak dauzkapaketearen sinadura egiaztatzeapaketearen bertsio-zenbakia%d zatia falta da'%.250s' zati-fitxategia ez da fitxategi arruntazatiaren tamaina handiegia da, edo ez da positiboazatiaren tamainak %d KiB izan behar du gutxienez (goiburua onartzeko)gaindituta
+itsatsibide-izenak ezin du lerro-jauzirik berririk edukiaurremendekotasun arazoa: %.250s ez da instalatukolehentasunalehentasuna barrutitik kanpo dagolehentasuna osoko bat izan behar da%s(r)en lehentasuna barrutitik kanpo: %s%s(r)en lehentasuna: %s%.250s: irakurketa-erroreairakurketaren errorea '%.250s'(e)nirakurketaren errorea '%.255s' konfigurazioko fitxategianirakurketa-errorea sarrera estandarreanirakurketa errorea stdin-en konfigurazioko fitxategiaren gonbitean'%.255s' paketearen informazioa irakurtzen'%s' paketearen informazioa irakurtzen: %s'%.250s' statoverride fitxategia irakurtzenpakete-fitxategia berriz muntatu da%2$s daukan %1$s: aurremendekotasun arazoa:
+%3$s%2$s daukan %1$s(r)i dagokionez:
+%3$s%.250s ezabatzea'%s' arkitektura kentzea unean datu-baseak darabileskuz hautatutako alternatiboa ezabatzen - %s modu automatikora aldatzenberrizendatzeak '%s' gainidaztea dakar
+  '%s' fitxategi ezberdinarekin, ez da onartzenrename: kendu bikoiztutako '%s' esteka zaharraeskatutako eragiketak supererabiltzailearen baimena behar durm komandoa garbitzekobilatu bai, baina ez da paketerik aurkitu (*.deb fitxategiak)<ezezaguna>%s(r)en hautapen automatikoa konfiguratzenpaketearen informazio-sarrera bat baino gehiago dago; bat bakarrik onartzen dashell komandoa fitxategiak lekuz aldatzekoalde batera utziko da %s(r)en sorrera, esleitutako %s fitxategia (%s esteken taldekoa) ez delako existitzenmorroiaren fitxategiamorroiaren estekamorroiaren esteka %s esteka nagusiaren berdina damorroiaren izenahelburuko '%.250s' fitxategia ez da fitxategi arruntazatitutako paketea batzeastatoverride fitxategiak lerro huts bat daukastatoverride fitxategiak amaierako lerro-jauzia falta duegoeraegoeraren egunkariaamaierako '/'-ak kentzen%s azpiprozesuak %d errorea eman du irteeran'%.250s' esteka sinbolikoaren tamaina %jd-etik %zd-era aldatu dasintaxi-errorea abiarazleen '%.250s' fitxategiansintaxi-errorea statoverride fitxategianargumentu bat hartzen du, abiarazlearen izenahelburua direktorioa da - ezin da saltatu kontrol fitxategiaren egiaztapena%d zatiaren hainbat bertsio daude - '%.250s' eta '%.250s' gutxienezez dago script-ik paketearen bertsio berrian - uzten ari dahau funtsezko pakete bat da, eta ez da kendu behareguneraketa automatikoetara itzultzeko erabili '%s --auto %s'errore gehiegi, gelditu egingo dalerro luzeegia edo lerro berria falta da '%.250s'(e)nsintaxi-errorea abiarazlearen intereseko '%.250s' fitxategian; legez kanpoko '%.250s' pakete-izena: %.250sabiarazlearen izenak karaktere baliogabea duabiarazlearen erregistrorik ez dago oraindikabiarazitaabiarazleen '%.250s' ci fitxategiak legez kanpoko abiarazleen sintaxia du '%.250s' abiarazle-izenean: %.250sabiarazleen ci fitxategiak '%.250s' direktiba ezezaguna duabiarazleen ci fitxategiak direktiba sintaxi ezezaguna duabiarazleen datuen direktorioa ez da oraindik sortuabiarazlearen begizta, utzitapakete berriaren script-arekin saiatzen...'%.250s' gainidazten saiatzen ari da; %.250s %.250s paketean ere badago'%.250s' gainidazten saiatzen , zein'%.250s'-en desbideratutako bertsio bat den'%.250s' gainidazten saiatzen, zein '%.250s' desbideratutako bertsio bat da (paketea: %.100s)%2$.250s %3$.250s paketeko '%1$.250s' direktorioa direktorioa ez den batekin gainidazten saiatzen ari dapartekatutako '%.250s' gainidazten saiatzen ari da, %.250s paketearen beste instantzietatik desberdina izanikbi komando zehaztu dira: --%s eta --%sezin da sarrerako '%.250s' zati-fitxategia (berr)ireki ezin da helburuko '%.250s' fitxategiaren jabetza aldatuezin da '%.250s' badagoen begiratuezin da '%s' fitxategiaren blokeoaren egoera egiaztatuezin da '%.250s' artxiboaren existentzia begiratuezin da esteka sinbolikoaren babeskopiaren 'chown' egin: '%.255s'ezin da '%.255s' inguruko nahastea garbitu, beste bertsio bat instalatu aurretikezin da '%s' fitxategia itxiezin da '%.250s' fitxategi berria itxiezin da baztertutako abiarazleen '%.250s' fitxategi berria itxiezin da egoera eguneratua itxi - '%.250s'ezin da '%.255s' sortuezin da '%.255s' sortu ('%.255s' prozesatzean)ezin da '%s' fitxategia sortuezin da '%.250s' fitxategi berria sortuezin da aldi baterako direktorioa sortuezin da sortu abiarazleen '%.250s' egoerako direktorioaezin da '%.250s' kontroleko informazio-fitxategia ezabatuezin da '%.250s' direktorio zaharra ezabatu: %sezin da erabilitako '%.250s' biltegi-fitxategia ezabatuezin da '%.250s' baztertuezin da %s (%s) exekutatuezin da bete %.250s betegarriarekinezin da %.250s hustu bete ondorenezin da '%s' fitxategia garbituezin da '%.250s' fitxategi berria garbituezin da egoera eguneratua hustu - '%.250s'ezin da fstat egin iturburuko fitxategianezin da egoera eguneratua sinkronizatu - '%.250s'ezin da '%s' direktorioaren deskriptorea lortuezin zaio ezikusi egin %s seinaleari %.250s exekutatu aurretikezin da '%.250s' instalatu '%.250s' gisaezin da '%.250s' (ustezko) informazio-fitxategi berria instalatuezin da '%.250s' informazio fitxategi berria '%.250s' gisa instalatuezin da baztertutako abiarazleen '%.250s' fitxategi berria instalatuezin da '%.255s'(r)en bertsio berria instalatuezin da egoera eguneratua instalatu - '%.250s'ezin da '%s' blokeatubertsio berria instalatu aurretik ezin da estekaren babeskopia egin: '%.255s'ezin da esteka sinbolikoaren babeskopia egin: '%.255s'ezin da joan '%.255s'(e)ra bertsio berria instalatzekoezin da'%.255s' irekiezin da '%s' direktorioa irekiezin da '%.250s' fitxategia irekiezin da '%.250s' biltegi-fitxategi berria irekiezin da irteerako '%.250s' fitxategia irekiezin da iturburuko '%.250s' fitxategia irekiezin da aldi baterako kontroleko direktorioa irekiezin da abiarazleen '%.250s' ci fitxategia irekiezin da baztertutako abiarazleen '%.250s' fitxategia irekiezin da baztertutako abiarazleen '%.250s' fitxategi berria ireki/sortuezin da '%.250s' biltegi-direktorioa irakurriezin da abiarazleen '%.250s' fitxategia irakurriezin da irakurri fitxategiaren deskriptorea - %.250sezin da irakurri '%.255s' estekaezin da '%.250s' zati-fitxategia irakurriezin da '%s' kenduezin da '%.250s'(r)en babeskopia kenduezin da kopiatutako iturburuko '%s' fitxategia kenduezin da '%.250s'(r)en erauzi berri den bertsioa kenduezin da '%.250s'(r)en instalatu berri den bertsioa kenduezin da kendu instalatu berri den '%.250s' bertsioa babeskopia berriro instalatzea onartzekoezin da '%.250s' informazio-fitxategi zaharkitua kenduezin zaio '%.250s' biltegi-fitxategi berriari '%.250s' izena jarriezin da '%.250s' zati-fitxategia berriro irekiezin da '%.250s'(r)en babeskopiaren bertsioa leheneratuezin da '%.250s' segurtasunez kenduezin da '%.255s' segurtasunez kenduezin da '%.250s' fitxategi zaharra segurtasunez kendu: %sezin da joan %.250s(r)en hasierara bete ondorenezin da bufferrik ezarri %s datu-basearen fitxategianezin da ezarri 'close-on-exec' bandera - %.250sezin da exekutatzeko baimenik '%.250s'(e)n ezarriezin da helburuko '%.250s' fitxategiaren modua ezarriezin da inguruneko aldagaia ezarri mantentzailearen script-arentzakoezin da azpi-prozesuaren inguruneko aldagaia ezarriezin da %s '%.250s' atzituezin da %s '%.250s' atzitu: %sezin da '%.250s' atzituezin da kontrol-direktorioaren egoera eskuratuezin da unean instalatutako '%.250s' konfigurazioko fitxategi analizatuezin da banatutako '%.250s' konfigurazioko fitxategi berria analizatuezin da beste '%.250s' fitxategiaren egoera eskuratuezin da leheneratutako '%.255s' atzitu beste bertsio bat instalatu aurretikezin da iturburuko '%.250s' fitxategia irekiezin da baztertutako abiarazleen '%.250s' fitxategiaren egoera eskuratuezin da '%s' direktorioa sinkronizatuezin da'%.255s' fitxategia sinkronizatuezin da '%s' fitxategia sinkronizatuezin da'%.250s' fitxategi berria sinkronizatuezin da egoera eguneratua trunkatu - '%.250s'ezin da '%s' desblokeatuezin da '%s' fitxategia idatziezin da '%.250s' fitxategi berrian idatziezin da baztertutako abiarazleen '%.250s' fitxategi berrian idatziezin da %d. fd-aren egoeran idatziezin da egoera eguneratua idatzi - '%.250s'parekatu gabeko komatxoak '%s'(e)nustekabeko bzip2 erroreaespero ez ziren datuak paketearen eta hautapenaren ondoren %d lerroanustekabeko fitxategi amaiera: %s - %.255sustekabeko korrontearen edo fitxategiaren amaieraustekabeko fitxategi amaiera %s irakurtzen saiatzeanustekabeko sarreraren amaieraespero ez zen lerro-amaiera pakete-izenaren ondoren %d lerroanustekabeko lerro-amaiera pakete-izenaren %d lerroanustekabeko lerro-amaiera statoverride fitxategian'%s' argumentu ezezagunakonpresio-estrategia ezezaguna'%s' konpresioaren estrategia ezezaguna%s konpresio mota ezezaguna!deb formatu-bertsio ezezaguna: %s'%.*s' behartzeko/uko egiteko aukera ezezaguna'%s' aukera ezezaguna-%c aukera ezezaguna--%s aukera ezezagunaIrteerako '%s' formatuaren egiaztapena ezezagunanahi zen egoera ezezaguna %d lerroan: %.250sdeskonprimituta baina konfiguratu gabeonartu gabeko konpresioaren aurre-ezarpenaonartu gabeko '%s' konpresio mota konpresio uniformearekinonartu gabeko aukerak fitxategiaren goiburuanosotasunaren egiaztapen mota onartu gabeaeguneratzeen direktorioak '%.250s' fitxategia dauka, eta izen hori luzeegia da (luzera=%d, geh.=%d)eguneratzeen direktorioak luzera desberdineko izenak dituzten fitxategiak dauzka (%d eta %d)%s alternatiboa eguneratzen, %s esteken taldeak morroiaren estekak aldatu dituelakoerabiltzaileak definitutako '%.*s' eremu izena laburregia da%s erabiltzen modu automatikoan %s (%s) hornitzeko%s erabiltzen eskuzko moduan %s (%s) hornitzeko'%s' eremuaren balioak gaizki osatutako '%.*s' lerroa dauka'%s' eremuko balioa ez da testuinguru honetan onartzenhuts egin du %s paketea egiaztatzean!huts egin du %s paketea egiaztatzean, baina eskatu bezala instalatuko da<bat ere ez>%2$.250s %1$.250s bertsioa instalatuta dago, saltatu egingo dabertsio-zenbakia ez da digitu batekin hastenbertsioaren kateak zuriune kapsulatuak ditubertsioaren katea hutsik dago'Provides' bertsioarekinhuts egin du %s azpiprozesuari itxaroteanabisua%s irakurtzean: %s%.250s kentzean, '%.250s' direktorioa ez dago hutsik, eta beraz ez da kenduko%.250s kentzean, ezin da '%.250s' direktorioa kendu: %s - baliteke direktorioa muntatze puntua bat izatea ?%.250s ez da aurreko bertsiora itzuliko (%.250s -> %.250s), saltatzenbai, %s konfigurazioa kenduko da, (%s-ek hondatuta)bai, %s kenduko da, eta %s jarripaketeen izenak zehaztu behar dituzu, ez paketeen barruko fitxategien izenak
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/fr.gmo dpkg-1.20.7.1/po/fr.gmo
--- dpkg-1.20.7.1-orig/po/fr.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/fr.gmo	2021-06-09 18:25:14.806503202 -0500
@@ -0,0 +1,738 @@
+���L	|<�P?�Pa�PkCQ��Q�wR&�R=S&]S�S-�T.�T�T.U5U QU4rU�U5�U-�U.'V0VV1�V$�V4�V/WCWq[W(�W$�WX;X:[X6�X1�X1�X!1Y2SY(�Y�Y�Y�Y.�Y#ZS/Z�Z�Z�Z9�Zm[)s[:�[9�[.\'A\&i\�\3�\5�\]]v#][�]U�]L^a^r^^�^Z�^�^_�_=�_(`=`N`�]`=9bRwb1�bD�bLAcA�c'�c&�c(d'Hd+pd4�d!�d,�d9 e-Ze�e#�e�e$�ef"+fNf!lf#�f�f�f�f�fg"#g2Fg1yg/�g�g.�g!h-<hRjhH�hQiAXie�ifjIgj7�j<�j&k(9kBbk�k�k�k
�k �kl52l1hl@�l0�lmm#7m![m}m�mK�m7n5;n-qn�n!�n�n'�n-o-Ko yo5�o�o �op$)p,Np.{p.�p.�pqH(q6qq(�q>�q$r 5rVrur|r�r��rIsVs#ms:�s-�t�tuu.u*;u<fu#�u-�u-�u�#v�v�v��v[�w�.xg)|
�}�~�(�-�'�8C�<|�.���0��30�1d��������ʁ1�*��J܂2'��Z�&��2&�EY�V����5�.E�-t�+��/Ά
��%�/2�*b�&��!��+ևB�]E���!��Mʈ�2.��a��
�"��Ȍ4�.�5K�3����Gō8
�,F�s�(������ҎG�6�3?�)s�$��:,��V*� ����*�����&�35�-i�+��,Ñ	����*(�S�i� ��H�������ȓg{�j��N��)�4��5,��b��*����u��&�A>�{��!��,�*K�.v����ě�H� ̝5�#� :�,[�$��.��>ܞ*�;F�,������b��u%����"t�������9��(��X�3x�?��8�2%�1X�,��:��4�5'�4]�A��Mԥ-"�P�d�#~�����Ԧ� ��1 �8R�?��B˧6�E�&a�.��!��!٨5��1�N�d�y�����	��9��.��#(�,L�y���%��ު%��-#�1Q�����)��1�:�?O�&����=Ӭ7�I�!c�.��*��#߭"�&&�0M�:~���Ԯ@�+,�;X�3��ȯ�A�B�&a�-��0��;�0#�(T�?}�)��-�"�8�4N�E��ɲ,�"�!4�V�5u� ��8̳��-3�5a�,��BĴB�+J�Gv�$�� �:�;?�{���&��ʶ7��D<�c���2�*$�"O�3r�:��-�&�6�P�h�~�"����Թ(ڹ=�*A�Jl���"ɺ���-;�i�)z�%��#ʻ@�@/�'p�������ڼ�����)%�O�n�!��!��#ѽ��%�%8�'^�,����̾�*�'3�'[���!���� ׿-��#&�#J�+n�%��$���� �"�;�N�"d�:����F��#�?�\�$y���������#��#�;�![�"}�:����5�� 0�2Q���%����0��*
+�$5�/Z���6��V��"'�(J�s�<��.��)��(�*B�+m���,��)��4�3A�2u�4��;��<�6V�:��7��@�0A�;r�?��$��A�=U�$��0��!���b&���c���:)�<d�=��_��H?���������)��)�$8�]��w�\��&X�&�'�� ��7��t'�2��-��'��4%�.Z�)��G��-��)�	@�kJ�/����>��%:�$`�#��&��!����"�^4�@������
�)�%8�+^�7��!�������0�H�a�Op�8��*��$�>�J�V�3b�����7��5�7�|M�
+����m��0c�G����)��!&�H�^�3{�$��5��
+�!�"5�4X���!��C��=�%O�
u� ��(����%��7�H�I`�!����G��P+�G|�.��?��#3�7W�#��+��2��Y�fl�L��M �&n�K��3��=�S�q�=����4��F�1^�;��&�����1�%K�.q�.��a��e1� ����D��
+�)�@�&S�-z�7��������.�;�D�]�"y�������)���&"�"I�"l�"����6���!�73�Bk�H��&��0�O�6f���$��4��	�O%�
+u�
+����
+��%����%��*�F�
M�[�+p�7��+��!�$"�4G�F|�@��6�1;�m�,��R��'�$/�	T�Z^�4��2��'!�I�.e�D��G��Y!�Q{�^��%,�+R�2~�%��%��1��+/�N[���!��3��*�E�5_���"��$��2��++�+W�,������"��$�-�!G�*i���*��0��0�&=�3d�4��5��)�,-�Z�Dl�*��4���)�G�&`�#��#��%��(��.�9M�'��*��.��	�!&�H�(^�(��4��4��[�,v�4��#��,��")�"L�/o�/��+��+��-'�*U�&��!������ 2<0o&�B�#
+..]{� �1�!23T�*���64;,p&�1� �'.?n4�1�+�/"Lo�"����!(-Vr:�"�#�SMgE��((=*f.�0�"�I	^	4m	�	(�	"�	
+
+"
+5
+S
+[
+Bp
+`�
+9'N#v`���R�
��
�p-&@Xg1�4�M'0u�4��#;0l<�6�9N:1�%�7�3MubC�+$H%mZ�;�3*4^+�<�)� &#Gk0��d�+=%[B���RUA�B�>-Pl4��4
+4?ty��^$]���+G^Y����G� !(!9!�H!c�#�D$R�$I %\j%E�%N
&M\&+�&*�&C'KE'0�'C�'\(>c((�(6�())7,)'d)5�)(�)6�)6"*Y*x*�*�*>�*/+j;+X�+G�++G,Us,"�,>�,a+-W�-~�-Yd.��.�U/g�/HQ0R�0 �0?1FN1#�1%�1�1:�1112+c27�2?�2b3Lj3�3�30�3+4$K4p4X�4H�4F25:y5#�52�5,6)86Cb6>�6#�6>	7#H7&l7�7.�78�7A86]82�8'�8L�8H<9<�9L�9):"9:2\:�:�:�:��:�;�;,�;}�;<R=�=�=�=�=.�=N
+>:Y>I�>H�>�'?�?�?~�?�~Ay%B��FXWH��I$�K=�K;�K 3L@TLV�LP�L=MFTM>�MC�MN-NFN�RNPEO;�Od�OG7P�P/RR?�R`�Rf#S(�SA�S-�SG#T-kT=�T�T3�T:'U6bU-�U.�U;�U\2Vr�VW2Wj9W�WK�WFX�KZ.\#1\?U\4�\=�\Q]#Z]d~]?�]3#^$W^5|^�^�^'�^g�^	[_Oe_8�_H�_>7`4v`d�`.a?a3]a�a�a/�aB�aL;b:�b9�b
+�b4c=c0Zc �c)�c$�cP�cLdRd�Ue�Cf��f�Ug�Rh1Hi9zi��i�j��kul+�lY!m�{m0MnH~n>�nJo,Qod~o��q/�r9�rs%(sLNs)�sX�s^t@}t��t;Iu��u�Av2w�:w�w'�xyyy�6yB�y{zM~zX�zS%{Ey{G�{.|A6|Fx|R�|H}C[}x�}8~Q~j~,�~.�~�~�~
+�~1B2Gub�f �?��/ǀ9��P1�2��-��[�'?�$g��� ��̂��J�Ma�/��C߃/#�*S�R~�4фR�KY�R��"��/�QK�T��q�|d�?�4!�dV�Y��)�6?�Pv�Fǉ1�7@�9x�H��^��$Z�$�`��>�eD�Y��3�08�Ki�3��D�;.�Wj�[N�Am�[��`�Jl�9��(�T�[o�)ˑ9��9/�Di�?��B�41�ff�3͓'�/)�JY�)��@ΔD�1T�^��7�/�\M�m��#�<�PS�:��Zߗ0:�Rk���>�@T�3��/əF��]@�?��,ޚ"�.�M�!h�9��ě�D�P.�+�m���*-�X�"u�)��E�>�1Y�2��W��V�Bm���/ȟ5��1.�`�-g���F��7��<2�9o�;��G�2-�=`�C��M�90�(j�3��/ǣE��2=�/p���0��'�%�C<�J��3˥J��8J�<��+��$�(�(:�(c�6��Qç�h2�8��+Ԩ?�7@�#x�����ѩ=�%/�9U�E��3ժH	�.R�F��:ȫd�h�9z�+��D�E%�7k�Q����R��^�5�4 �U�Nh�F��N��EM�@��@԰�M3�8��U��T�Le�J��n��al�LγY�Mu�eôZ)�b��U�3=�[q�fͶ;4�Ep�5��&�T�1h����-7�Ve�S��c��t�W�l�+����̻*�+�1@�!r����}*�=��F�&-�%T�Cz����FH�?��/ϿE��BE�5�����?V���	��z��74�l�g��;��3'�1[�1��-��0��)��H�_��9?�5y�9����D��,@�;m�1��!���� �"8� [�|�i��M��EK�%��������F��"&�,I�cv�_��:��V�
+
+�/��E�J��ZA�0��0��0��/�/L�M|�<��M�U�/p�/��H�� � :�G[�>��3��
�)$�1N�$��=��\��@�Z\�-����`�{d�g��FH�Y��6��S �4t�2��3��n���\�`s�;��Z�@k�X��)�%/�OU���I��[�Kb�o��2�*Q� |�+��9��I�MM�g��q�0u�
��h��#�A�^�<y�2��O��9�B�?I�4��	����!��)�2�H�%f�@��(��E��:<�<w�1����?� C�d�X}�a��q8�>��C��-�DK�
+��2��N��3�[Q�����.����<�%N�It�P����/�@F�?��H��B�OS�]��U�FW�A��J��+�AB����8�GE�	�����S$�Px�X��W"�Az�Y��]�pt�y��c_�+��;��F+�5r�E��?��S.�[��*��6	�N@�6��#��M��*8�.c�.��R��C�BX�B��#���$!�3F�-z�5��8��-�<E�M��>��:�HJ�R��P��=7�8u���k��F:�X��"��-��)+�@U�7��4��:�H>�E��W��;%�Da�E��)��,�"C�=f�;��J��L+��x�@��S?�1��@��7�6>�Mu�C��QFYJ�E�B1<t'�.�$1-W_e�=R[4�G�4+4`%�<�8�1*Q6|R�96@(w�E�@4B-w>�$�>	2H{>�<�N	b	)�	-�	&�	-�	.-
+\
+w
+�
+)�
+/�
+�
+*CE/�*�s�yX`�%3
>Y
J�
E�
?):i+�^�/;8)t4�*��(;
drr��I�,�'b*?wI��u?��$M K�4ftZ�_�r��:(R�NoiA�� ��Tv4
+�Z���5F��
!n��0��t-b��~����+2��<]������*��F\�5H	w��2�&��N���6%�Yj�9Z��������^�B��H?.��k�h���d�Zji�F�<
+w\V�|#�7��\ ��u�c�Jf���8Rs��#��4z��|6��NkG5���`��cR��z��%J%.8GL1X�n���E��B\[��@��U������B"�����~�<�����f�e�<�'
,��_P��N��r�y�A�r��*�8��CS�,���1��q��5�����]�W����
+Q/���D	����Y�d�D��>��(��Y�x��{����m�-v}�-�	�������
+7X�9�V
�H�),q�����c�2��9"��x�}�M{KM0�m�Ln�O�>���[-�+7j��)'�y�(3�Eb���E�SAlt��yy�nkU�������T,m�/�W6��]C����&I��3�uq(��|e�����+;vc����CK��`��������LI����L.{��&=��#>��]��s�!��"T!�lG��	0���#��S��P��;�F���%$�1��O�0:��3����7U�����YqV�Xb��W���r$��R�:���Vz:g�4�l=��J�)�[�����Ga������Q��w�/���p?������oiJ��E�e���Q�����������_Xu�6�s��d�a��o��g�h���3bD��|zd^���oKH�P���+}_UM ��e�{}B=t;1���x"s*�=��&h�^S��x�p��g^��C���/'i���vm�@g��a�pP8hl�T;������*��>�`��2�pQD�$���)�kA��j��9��'!~��.@a
�O�IW��O@�`[��~�f
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s suggests %s%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenVersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open security status notification channelcannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentgenerated corrupt ar header for '%s'group '%s' does not existheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete force/refuse option '%s'obsolete option '--%s'old conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion number does not start with digitversion string has embedded spacesversion string is emptyversioned Provideswait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-09-08 10:18+0200
+Last-Translator: Sébastien Poher <sbphr@volted.net>
+Language-Team: French <debian-l10n-french@lists.debian.org>
+Language: fr
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n > 1);
+X-Generator: Poedit 1.5.4
+
+ paquets bloqués par le traitement impossible d'actions différées requises :
+
+Le fichier de configuration « %s » n'existe pas sur le système.
+Installation d'un nouveau fichier de configuration comme demandé.
+
+Les options de débogage peuvent être combinées avec un « or » (bitwise-or).
+Noter que les valeurs et leur signification peuvent changer.
+
+Utilisez « dpkg » pour installer et supprimer des paquets de votre
+système, ou bien « apt » ou encore « aptitude » pour une gestion
+conviviale des paquets.
+Les paquets dépaquetés en utilisant « dpkg-deb --extract » seront
+incorrectement installés !
+
+AVERTISSEMENT - les options marquées avec [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+ATTENTION : utiliser une option marquée [!] peut sérieusement endommager votre
+installation.
+Les options de forçage marquées [*] sont activées par défaut.
+     Inchangé depuis l'installation.
+      La version dans le paquet est la même que celle de la précédente installation.
+     n'est pas un simple fichier          %.255s
+   Que voulez-vous faire ? Vos options sont les suivantes :
+    Y ou I  : installer la version du responsable du paquet
+    N ou O  : garder votre version actuellement installée
+      D     : afficher les différences entre les versions
+      Z     : suspendre ce processus pour examiner la situation
+  « %.250s » (version « %.250s ») est présent ainsi que « %s ».
+  %.250s (version %.250s) doit être installé.
+  %.250s est %s.
+  %.250s est installé, mais sa version est %.250s.
+  %.250s n'est pas installé.
+  %.250s doit être déconfiguré.
+  %.250s doit être installé, mais sa version est %.250s.
+  %.250s doit être supprimé.
+  %.250s est dépaqueté, mais n'a jamais été configuré.
+  %.250s est dépaqueté, mais sa version est %.250s.
+  la dernière version configurée de %.250s est %.250s.
+  « %.250s » fournit « %.250s » et est présent ainsi de  « %s ».
+  %.250s fournit %.250s et doit être installé.
+  %.250s fournit %.250s mais est %s.
+  %.250s fournit %.250s mais doit être déconfiguré.
+  %.250s fournit %.250s mais doit être supprimé.
+%s (%s) fournit %s.
+  -?, --help                         Afficher ce message.
+      --version                      Afficher la version.
+
+  Le paquet « %s » attend le traitement d'actions différées.
+ Le paquet %s n'est pas encore configuré.
+  Le paquet %s n'est pas installé.
+  Le paquet %s doit être supprimé.
+  Le paquet « %s » qui fournit « %s » attend le traitement d'actions différées.
+  Le paquet %s qui fournit %s n'est pas encore configuré.
+  Le paquet %s qui fournit %s n'est pas installé.
+  Le paquet %s qui fournit %s doit être supprimé.
+  La version de %s sur le système est %s.
+  La version de %s sur le système, fournie par %s, est %s.
+  La version de %s à configurer est %s.
+ le lien est actuellement absent le lien pointe actuellement sur %s lien secondaire %s : %s %7jd octets, %5d lignes   %c  %-20.127s %.127s
+ %d dans %s :  %d paquet, appartenant aux sections suivantes : %d paquets, appartenant aux sections suivantes : %s (%jd octets)
+ %s (%s) casse %s et est %s.
+ %s (ce n'est pas un simple fichier)
+ ==> Supprimé (par vous ou par un script) depuis l'installation.
+ ==> Fichier du système créé par vous ou par un script.
+ ==> Fichier également présent dans le paquet fourni par le responsable du paquet.
+ ==> Conservation de l'ancien fichier de configuration comme fichier par défaut.
+ ==> Modifié (par vous ou par un script) depuis l'installation.
+ ==> Le distributeur du paquet a fourni une version mise à jour.
+ ==> Utilisation de l'ancien fichier en place comme demandé.
+ ==> Utilisation du nouveau fichier de configuration comme fichier par défaut.
+ ==> Utilisation du nouveau fichier comme demandé.
+Paquet %s : partie(s) L'action par défaut installe la nouvelle version.
+ L'action par défaut garde votre version actuelle.
+ et  dépend de %d programme attendu non trouvé dans la variable PATH ou non exécutable
+%s%d programmes attendus non trouvés dans la variable PATH ou non exécutables
+%s%d fichier et répertoire déjà installé.)
+%d fichiers et répertoires déjà installés.)
+%d composant de contrôle nécessaire manque%d composants de contrôle nécessaires manquent%s (sous-processus) : %s
+%s - priorité %d%s casse (« breaks ») %s%s entre en conflit avec %s%s corrompu : %s%s option de débogage, --debug=<octal> or -D<octal>:
+
+ Nombre  Réf. ds source   Description
+%s dépend de %s%s améliore %soptions de forçage de %s - contrôle les actions en cas de problème:
+  avertir et continuer :  --force-<option>,<option>,...
+  arrêter sur erreur :    --refuse-<option>,<option>,... | --no-force-<option>,...
+ Ce qui peut être forcé:
+%s n'est pas correctement installé ; ses dépendances sont ignorées.%s pré-dépend de %s%s recommande %s%s suggère %s%s :
+    Version du format de partie :                  %d.%d
+    Partie du paquet :                             %s
+        ... version :                              %s
+        ... architecture :                         %s
+        ... code de contrôle MD5 :                 %s
+        ... longueur :                             %jd octets
+        ... coupé tous les :                       %jd octets
+    Numéro de partie :                             %d/%d
+    Longueur de la partie :                        %jd octets
+    Décalage de la partie :                        %jd octets
+    Taille du fichier (portion utilisée) :         %jd octets
+
+%s : le fichier de configuration « %.250s » n'est ni un vrai fichier ni un lien (= « %s »)%s : le fichier de configuration « %.250s » est un nom de fichier dégénéré.
+(« %s » est un lien symbolique vers « %s »)%s : le fichier de configuration « %s » est un lien circulaire (= « %s »)%s : problèmes de dépendances, mais configuration comme demandé :
+%s%s : problème de dépendance, mais traitement des actions différées comme demandé :
+%s%s : problème de dépendance, mais suppression comme demandé :
+%s%s : une erreur s'est produite en liant les données entrantes au flux bzip2%s : une erreur s'est produite en liant les données entrantes au flux gzip%s: erreur en liant la sortie au flux bzip2%s: erreur en liant la sortie au flux gzip%s :échec de la liaison de « %.250s » à « %.250s » : %s%s : échec de la suppression de « %.250s » (avant remplacement) : %s%s: impossible de supprimer « %.250s » : %s%s: n'a pas pu supprimer l'ancienne sauvegarde « %.250s » : %s%s : échec de la suppression de la version de l'ancienne distribution « %.250s » : %s%s: n'a pas pu renommer « %.250s » en « %.250s » : %s%s : erreur de lecture interne de bzip2%s : erreur de lecture interne de bzip2 : « %s »%s : erreur d'écriture interne de bzip2%s : erreur d'écriture interne de bzip2 : « %s »%s : erreur de lecture interne de gzip%s : erreur de lecture interne de gzip : « %s »%s : erreur d'écriture interne de gzip%s : erreur d'écriture interne de gzip : « %s »%s : erreur d'écriture interne de gzip : « %s »%s : erreur de fermeture LZMA%s : erreur LZMA : %s%s : erreur de lecture LZMA%s : erreur d'écriture LZMA%s : erreur de copie traversante (« pass-through ») : %s%s : impossible d'ouvrir %s pour hachage : %s%s : impossible de lire le lien correspondant au fichier de configuration « %s » (= « %s ») : %s%s : impossible d'analyser le fichier de  configuration « %s » (= « %s ») : %s« %.255s » ne contient pas de composant de contrôle « %.255s »« %s » entre en conflit avec « %s »« %s » contient une valeur « Priority » « %s » définie par l'utilisateur« %s » n'utilise pas de valeurchamp « %s », nom de paquet incorrect « %.255s » : %schamp « %s », nom d'architecture manquant, ou absurdités à la place d'un nom d'architecturechamp « %s », nom de paquet manquant, ou absurdités à la place d'un nom de paquetchamp « %s », référence à « %.255s » :
+ « %c » est obsolète, utiliser « %c= » ou « %c%c » à la placechamp « %s », référence à « %.255s » :
+ mauvaise relation entre versions %c%cchamp « %s », référence à « %.255s » :
+ correspondance exacte implicite pour le numéro de version, utilisez plutôt « = » à la placechamp « %s », référence à « %.255s » :
+ valeur de version commençant avec un caractère non-alphanumérique, ajoutez plutôt un espacechamp « %s », référence à « %.255s » : nom d'architecture non valable « %.255s » : %schamp « %s », référence à « %.255s » : version non terminéechamp « %s », erreur de syntaxe après la référence au paquet « %.255s »« %s » a besoin d'une valeur« %s » introuvable dans la variable PATH ou non exécutable(À noter la disparition de %s, qui a été complètement remplacé.)
+(Lecture de la base de données... (aucune description n'est disponible)(%jd octets au total)
+, informations de débogage écrites (« core dumped »)l'option -%c ne prend pas de valeur en paramètrel'option -%c prend une valeur en paramètre--%s --pending ne prend pas de paramètre non optionnel--%s --recursive a besoin d'au moins un chemin comme paramètre--%s ne prend pas en charge (pour l'instant) la lecture de fichiers .deb depuis l'entrée standard--%s a besoin du nom et de l'emplacement d'un fichier .deb comme paramètres--%s a besoin de <nom>--%s a besoin de <nom> <chemin>--%s a besoin d'un fichier .deb comme paramètre--%s a besoin d'un paramètre <répertoire>--%s a besoin d'un paramètre <file>--%s demande un seul paramètre--%s a besoin d'un répertoire cible.
+Peut-être devriez-vous utiliser dpkg --install ?--%s requiert un nom de paquet légal. « %.250s » ne l'est pas ; %s--%s a besoin d'au moins un fichier archive de paquet comme paramètre--%s a besoin d'au moins un nom de paquet comme paramètre--%s a besoin de quatre paramètresl'option --%s ne prend pas de valeur en paramètrel'option --%s prend une valeur en paramètre--%s requiert un paramètre octal positif--%s requiert un ou plusieurs fichiers de parties comme paramètres--%s accepte au plus un fichier « Packages » en paramètre--%s prend au plus deux paramètres--%s a besoin d'au plus deux paramètres (.deb et répertoire)--%s prend exactement un paramètre--%s prend exactement deux paramètres--%s ne prend pas de paramètre--%s utilise un nom de paquet comme paramètre--%s a besoin d'un seul paramètre (nom de fichier .deb)--%s utilisé avec l'opérateur relationnnel obsolète « %s »--auto requiert exactement un fichier comme paramètre--auto requiert l'utilisation de l'option --output--compare-versions : mauvaise relation--compare-versions prend trois paramètres : <version> <relation> <version>--search a besoin d'au moins un motif de nom de fichier comme paramètre--split a besoin d'un nom de fichier source comme paramètre--split prend au plus un nom de fichier source et un préfixe de destination--update spécifié, mais %s n'existe pas--update est inutile pour --remove... on dirait que tout a fonctionné correctement..../%s ; cependant :
+<compress> depuis tar -cf<deb> est le nom de fichier d'une archive au format Debian.
+<cfile> est le nom d'un composant fichier administratif.
+<cfield> est le nom d'un champ dans le fichier « control » principal.
+
+<decompress><dpkg-deb --info tube><link> et <path> ne peuvent être les mêmes<lien> est le lien symbolique pointant vers %s/<nom>.
+  (par exemple, /usr/bin/pager)
+<nom> est le nom principal pour ce groupe de liens.
+  (par exemple, pager)
+<chemin> est l'emplacement de l'un des fichiers cibles alternatifs.
+  (par exemple, /usr/bin/less)
+<priorité> est un entier ; les options avec des nombres élevés ont une priorité
+  supérieure en mode automatique.
+
+<descripteur de fichier d'état de paquet et de progression><erreur standard><entrée standard><sortie standard>Ajout de « %s »
+Autoriser l'installation de paquets en conflitL'alternative %s n'a pas été modifiée car le choix %s n'est pas disponible.Toujours installer les fichiers de configuration manquantsToujours utiliser les nouveaux fichiers de configuration, ne pas demanderToujours utiliser les anciens fichiers de configuration, ne pas demanderUn autre processus a verrouillé la base de données en écriture et pourrait
+être en train de la modifier, ce qui peut être la source de certains des
+problèmes suivants.
+ArchitectureAuthentification de %s ...
+Commandes :
+  --add <propriétaire> <groupe> <mode> <chemin>
+                           ajoute une nouvelle entrée <chemin> dans la base
+                           de données.
+  --remove <chemin>        supprime <chemin> de la base de données.
+  --list [<motif>]         liste les dérogations (« overrides ») actuelles
+                           dans la base de données.
+
+Commandes:
+  --check-supported                Vérifie que la version de dpkg accepte
+                                   les actions différées (« triggers »).
+
+Commandes :
+  --install <lien> <nom> <chemin> <priorité>
+    [--slave <lien> <nom> <chemin>] ...
+                           ajouter un groupe d'alternatives au système.
+  --remove <nom> <chemin>  supprimer <chemin> de l'alternative de groupe <nom>.
+  --remove-all <nom>       supprimer le groupe <nom> du système d'alternatives.
+  --auto <nom>             basculer le lien maître <nom> en mode automatique.
+  --display <nom>          afficher des informations à propos du groupe <nom>.
+  --query <nom>            version analysable automatiquement de --display <nom>.
+  --list <nom>             afficher toutes les cibles du groupe <nom>.
+  --get-selections         afficher les noms principaux d'alternatives et leur état.
+  --set-selections         lire l'état des alternatives depuis l'entrée standard.
+  --config <nom>           afficher l'alternative pour le groupe <nom> et demande à
+                           l'utilisateur de sélectionner celle qu'il veut utiliser.
+  --set <nom> <chemin>     positionner <chemin> en tant qu'alternative pour <nom>.
+  --all                    exécuter --config pour toutes les alternatives.
+
+Commandes :
+       -s|--split <fichier> [<préfixe>]   Découper une archive.
+       -j|--join <partie> <partie> ...    Fusionner les parties.
+       -I|--info <partie> ...             Afficher l'information sur une partie.
+       -a|--auto -o <complet> <partie>    Auto-assembler les parties.
+       -l|--listq                         Lister les pièces isolées.
+       -d|--discard [<nom fichier> ...]   Annuler les pièces isolées.
+
+Commandes :
+  [--add] <fichier>        ajouter un détournement.
+  --remove <fichier>       supprimer un détournement.
+  --list [<motif>]         afficher les détournements de fichier.
+  --listpackage <fichier>  afficher les paquets qui ont un détournement pour le fichier.
+  --truename <fichier>     affiche le nom du fichier détourné.
+
+ Les opérateurs de comparaison pour --compare-versions sont les  suivants :
+  lt le eq ne ge gt       (ne considérer aucune version comme plus  tardive
+                           que n'importe quelle version)
+  lt-nl le-nl ge-nl gt-nl (ne considérer aucune version comme plus récente
+                           que n'importe quelle version)
+  < << <= = >= >> >       (uniquement pour des raison de compatibilité  avec
+                           la syntaxe du fichier control)
+
+Fichier de configuration « %s »
+Fichier de configuration « %s » (réellement « %s »)
+Configurer tout paquet qui pourrait être utile à celui-ciDéconfiguration de %s (%s) ...
+Déconfiguration de %s (%s), pour pouvoir supprimer %s (%s) ...
+Outil « %s » d'interrogation du programme de gestion de paquets Debian version %s
+Outil d'actions différées (« triggers ») du paquet Debian %s, version %s
+Debian %s version %s.
+Outil %s de gestion en arrière-plan des archives Debian, version %s.
+Programme « %s » de gestion de paquets Debian version %s.
+Outil « %s » de (dés)assemblage de paquets Debian, version%s.
+%s supprimé.
+Dépendances et conflitsDescriptionSouhait=inconnU/Installé/suppRimé/Purgé/H=à garder
+| État=Non/Installé/fichier-Config/dépaqUeté/échec-conFig/H=semi-installé/W=attend-traitement-déclenchements
+|/ Err?=(aucune)/besoin Réinstallation (État,Err: majuscule=mauvais)
+Ne pas effectuer d'opérations d'entrée/sortie sûres lors de la décompressionDes erreurs ont été rencontrées pendant l'exécution :
+Code de sortie :
+  0 = OK
+  1 = avec --auto, le fichier n'est pas une partie
+  2 = autre problème
+Le fichier « %.250s » n'appartient pas à une archive multi-partie
+Syntaxe du formatage :
+  Un formatage est une chaîne qui sera affichée pour chaque paquet.
+  Elle peut contenir les échappements classiques \n (nouvelle ligne),
+  \r (retour à la ligne) ou \\ (backslash). Des informations sur
+  les paquets peuvent être incluses en utilisant la syntaxe
+  ${var[;width]} (taille). Les champs seront alignés à droite, à moins que la
+  taille spécifiée ne soit négative, auquel cas un alignement à gauche
+  sera appliqué.
+Informations de progression en général utilesrequête ignorée de suppression de la diversion partagée %s.
+requête ignorée de renommage du fichier « %s » qui est une diversion du paquet « %s »
+L'information sur %d paquet a été mise à jour.
+L'information sur %d paquets a été mise à jour.
+Bruit délirant (NdT : n'importe quoi)Installer un paquet même si le contrôle d'authenticité échoueInstaller même si cela casse un autre paquetInstallation de la nouvelle version du fichier de configuration %s ...
+Lancement et état des scripts de maintenanceFichiers inutiles laissés dans le répertoire de dépôt :
+Conservation de « %s »
+Affichage verbeux pour les dépendances et conflitsBeaucoup de bruit à propos p.ex. du répertoire dpkg/infoAffichage verbeux pour chaque fichier de configurationAffichage verbeux pour chaque fichier traitéAffichage verbeux pour les actions différéesfin de fichier MSDOS (^Z) dans le nom de champ « %.*s »fin de fichier MS-DOS dans la valeur du champ « %.*s » (manque-t-il un saut de ligne ?)Plus d'une copie du paquet %s ont été dépaquetées
+ lors de ce traitement. Une seule configuration effectuée.
+NomPas de détournement « %s », aucun supprimé.
+Note : la variable PATH du superutilisateur doit normalement contenir /usr/local/sbin, /usr/sbin et /sbinRien à configurer.Proposer de remplacer les fichiers de configuration sans nouvelles versionsOptions:
+  --admindir=<répertoire>           Utilise <répertoire> au lieu de « %s ».
+  --by-package=<paquet>             Passe outre le traitement des actions
+                                    différées (« triggers »)
+                                    (normalement commandité par dpkg).
+  --await                           Le paquet attend le traitement des actions différées.
+  --no-await                        Aucun paquet n'attend le traitement des actions différées.
+  --no-act                          Pour test - n'opère en réalité aucun changement.
+
+Options :
+   --depotdir <répertoire>  utiliser <répertoire> au lieu de %s/%s.
+   -S|--partsize <taille>   en Kio, pour -s (défaut 450)
+   -o|--output <fichier>    nom de fichier, pour -j (défaut
+                             <paquet>_<version>_<arch>.deb)
+   -Q|--npquiet             (ne rien afficher quand -a n'est pas
+                             une partie)
+   --msdos                  créer des noms de fichiers au format 8.3.
+
+Affichage pour chaque fichier de configurationAffichage de chaque fichier traitéÉcraser un fichier détourné pour une version non détournéeÉcraser un fichier d'un paquet par celui d'un autreÉcraser le répertoire d'un paquet par le fichier d'un autredes programmes importants sont absents dans PATH, des problèmes sont à prévoirla variable PATH n'est pas définieLe paquet %s est à garder (on hold), et laissé tel quel. Utilisez --force-hold pour passer outre.
+Paquet %s listé plus d'une fois, mais traité une seule fois.
+Le paquet « %s » ne contient aucun fichier (!)
+Paquets non encore réassemblés :
+Partie %d du paquet %s mise en file (manque toujours Cheminchamp Pre-DependsPréparation du dépaquetage de %s ...
+Appuyez sur <Entrée> pour conserver la valeur par défaut[*] ou choisissez le numéro sélectionné :PrioritéTraiter les paquets même sans architecture ou avec une architecture incorrecteTraiter même les paquets dont la version est incorrecteTraitement des actions différées (« triggers ») pour %s (%s) ...
+L'exécution a été arrêtée car il y avait trop d'erreurs.
+Purge des fichiers de configuration de %s (%s) ...
+Assemblage du paquet %s à partir de %d partie :Assemblage du paquet %s à partir de %d parties :Enregistrement de l'information sur %s de %s.
+Supprimer un paquet essentielSupprimer les paquets qui ont besoin d'installationSuppression de %s (%s) ...
+Suppression de « %s »
+Remplacer un paquet par une version inférieureRemplacés par des fichiers du paquet %s (%s) déjà installé...
+Remplacement de l'information sur les paquets disponibles, en utilisant %s.
+Remplacement de fichiers dans l'ancien paquet %s (%s) ...
+Sélection du paquet %s précédemment désélectionné.
+SélectionUtiliser le forçage (force) pour toutes les optionsParamétrage de %s (%s) ...
+Affichage délirant pour les actions différéesLigne non valable sautée : %sAlternative inconnue « %s » ignorée.Paquet désélectionné %s ignoré.
+Découpage du paquet %s en %d partie :Découpage du paquet %s en %d parties :ÉtatLes paquets suivants sont en attente du traitement des actions différées qu'ils
+ont activées dans d'autres paquets. Ce traitement peut être demandé via « dselect »
+ou « dpkg --configure --pending » ( ou encore « dpkg --triggers-only » ) : 
+Les paquets suivants sont dans un état incohérent à cause de sérieux
+problèmes survenus lors de l'installation. Ils doivent être réinstallés
+(ainsi que tous les paquets qui en dépendent) pour pouvoir fonctionner
+correctement :
+Les paquets qui suivent ne possèdent pas de fichier de contrôle de liste dans
+la base de données et doivent être réinstallés :
+Les paquets qui suivent ne possèdent pas de fichier de somme de contrôle MD5 dans
+la base de données et doivent être réinstallés :
+Les paquets suivants sont à demi configurés, probablement à cause de
+problèmes survenus lors de la première configuration. Il faudrait réessayer
+de les configurer en utilisant dpkg --configure <paquet> ou l'option
+configure du menu de dselect :
+Les paquets suivants sont à demi installés à cause de problèmes survenus
+lors de l'installation. L'installation peut certainement être achevée en
+réessayant ; les paquets peuvent être supprimés en utilisant dselect ou
+dpkg --remove :
+Les paquets suivants n'ont pas d'architecture :
+Les paquets suivants ont une architecture non valable :
+Les paquets suivants ont une architecture inconnue, ce qui provoquera des problèmes de dépendances avec les interfaces. Cela peut être corrigé en enregistrant l'architecture inconnue avec la commande « dpkg --add-architecture » :
+Les paquets suivants ont activé le traitement d'actions différées,
+mais ce traitement n'est pas terminé. Le traitement d'actions différées
+peut être demandé via « dselect » ou « dpkg --configure --pending »
+( ou encore « dpkg --triggers-only » ) : 
+Les paquets suivants ont été dépaquetés mais ne sont pas configurés. Ils
+doivent être configurés en utilisant dpkg --configure ou l'option configure
+du menu de dselect pour pouvoir fonctionner :
+Il existe %d choix pour l'alternative %s (qui fournit %s).Il existe %d choix pour l'alternative %s (qui fournit %s).Il n'existe aucun programme fournissant %s.Il n'existe qu'une « alternative » dans le groupe de liens %s (qui fournit %s) : %sCe programme est un logiciel libre ; veuillez consulter la « GNU General
+Public License » version 2 ou supérieure pour prendre connaissance des
+conditions de reproduction. AUCUNE garantie n'est offerte.
+Activation et traitement des actions différéesTenter d'installer ou désinstaller même sans être le superutilisateurChanger tous les problèmes de dépendances en avertissements Changer tous les problèmes de dépendances de versions en avertissements Tapez « exit » lorsque vous aurez fini.
+Utilisez « dpkg --help » pour obtenir de l'aide à propos de l'installation et la désinstallation des paquets [*] ;
+Utilisez « apt » ou « aptitude » pour gérer les paquets de manière plus conviviale ;
+Utilisez « dpkg -Dhelp » pour obtenir la liste des valeurs de drapeaux de débogage ;
+Utilisez « dpkg --force-help » pour consulter la liste des options de forçage ;
+Utilisez « dpkg-deb --help » pour obtenir de l'aide sur la manipulation des fichiers *.deb ;
+
+Les options marquées d'un [*] affichent beaucoup d'informations : tubez-les à travers « less » ou « more ».Taper dpkg-deb --help pour obtenir une aide à propos de la manipulation des fichiers *.deb ;
+Taper dpkg --help pour obtenir une aide sur l'installation et la désinstallation des paquets.Taper dpkg-split --help pour obtenir de l'aide.Taper « dpkg-trigger --help » pour obtenir de l'aide.Dépaquetage de %s (%s) ...
+Dépaquetage de %s (%s) sur (%s) ...
+Mise à jour de l'information sur les paquets disponibles, en utilisant %s.
+Syntaxe : %s [<option> ...] <commande>
+
+Utilisez « %s --help » pour obtenir des informations sur l'utilisation du programme.Utilisez « apt » ou « aptitude » pour gérer les paquets de manière plus conviviale.
+Utiliser --help pour de l'aide sur le détournement de fichiers.Utiliser --help pour de l'aide sur la façon de ne pas tenir compte des informations relatives au fichier (« file stat information »).Utiliser --help pour de l'aide sur la recherche de paquets.Utiliser dpkg avec -b, --build, -c, --contents, -e, --control, -I, --info,
+-f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+sur les archives (taper %s --help.)
+
+Choisir l'option par défaut pour les nouveaux fichiers
+de si elle existe, ne pas demander. S'il n'existe pas
+d'option par défaut, la question sera posée à moins
+que l'une des options « confold » ou « confnew » ne
+soit utilisée.VersionLa version de dpkg qui gère %s n'est pas encore configurée.
+ Veuillez utiliser « dpkg --configure dpkg » et essayer à nouveau.
+Lors d'un ajout, les options par défaut sont --local et --divert <original>.distrib.
+Lors d'une suppression, --package ou --local et --divert doivent correspondre si elles
+sont spécifiées. Les scripts preinst/postrm de paquets doivent toujours spécifier
+--package et --divert.
+Supprimerait ou purgerait %s (%s) ...
+[défaut=N][défaut=Y][pas de choix par défaut]le répertoire d'administration (admindir) doit être sous le répertoire d'installation (instdir) pour que dpkg fonctionne correctementconfiguration additionnelle de « %s » (requise par « %s »)l'alternative %s (qui fait partie du groupe de liens %s) n'a pas été trouvée ; suppression de la liste des alternativesl'alternative %s ne peut pas être principale : elle est un secondaire de %sl'alternative %s ne peut pas être secondaire de %s : c'est une alternative principalel'alternative %s ne peut pas être secondaire de %s : elle est un secondaire de %sl'alternative %s pour %s n'est pas enregistrée ; pas de suppressionl'alternative %s pour %s n'est pas enregistrée ; pas de configurationle lien alternatif %s est déjà géré par %sle lien alternatif %s est déjà géré par %s (secondaire de %s)le lien alternatif n'est pas absolu alors qu'il devrait l'être : %sle nom alternatif (%s) ne doit pas contenir le caractère « / » ou des espacesle chemin alternatif n'est pas absolu alors qu'il devrait l'être : %snom de paquet « %s » ambigu avec plus d'une instance installéeune dérogation (« override ») pour « %s » existe déjà mais --force a été spécifié ; il sera donc ignoréune dérogation pour « %s » existe déjà ; abandontout détournement de %stout détournement de %s en %sle nom du membre ar « %s » est trop longla taille du membre ar %jd est trop importante<vide><aucune><inconnue>l'architecture « %s » n'est pas valable : %sl'architecture « %s » est réservée et ne peut être ajoutéel'archive « %.250s » contient deux éléments de contrôle. Abandondans l'archive « %s » le membre « %.*s » figure prématurément avant « %s ». Abandon.l'archive « %s » utilise un procédé de compression inconnu pour le membre « %.*s ». Abandon.l'archive contient un objet « %.255s » de type inconnu 0x%xtaille de l'élément de contrôle de l'archivel'archive utilise une version de format non valable : %sl'archive possède une information de contrôle de taille « %s » mal forméel'archive n'a pas de saut de ligne dans l'en-têteélément en-tête d'information de l'archivel'archive utilise le format version %d.%d ; utiliser une version plus récente de dpkg-debnuméro magique de version de l'archiveen-tête de l'élément de l'archivenuméros des parties d'archivedécalage de la partie d'archivenuméro des parties d'archivetaille totale de l'archivemode automatiqueles mises à jour automatiques de %s/%s sont désactivées ; conservationen attente du traitement de l'action différée demandée par un autre paquetligne vide dans la valeur du champ « %.*s »cassé à cause de l'échec d'une suppression ou d'une installationcassé à cause de l'échec de « postinst »impossible d'installer le choix inconnu %simpossible de faire un « mmap » sur le fichier d'info du paquet « %.255s »ne peut pas supprimer l'ancien script « postrm »impossible de faire un « stat » sur le fichier d'info du paquet « %.255s »impossible d'ajouter le fichier membre ar (%s) à « %s » : « %s »impossible d'ajouter la partie « %s » d'un paquet découpé « %s » : %simpossible d'ajouter à « %s »impossible de fermer le tuyau du décompresseurimpossible de calculer le somme de contrôle MD5 pour le fichier « %s » : %simpossible de calculer la somme de contrôle MD5 du fichier tar « %.250s » : %sImpossible de convertir la séquence multioctets « %s » vers une séquence à caractères étendus (16 bits).Impossible de convertir la chaîne de caractères multioctets « %s » vers une chaîne à caractères étendus (16 bits).impossible de copier « %s » dans l'archive « %s » : %simpossible de copier « %s » en « %s » : %simpossible de copier le membre de l'archive depuis « %s » dans le tuyau
+du décompresseur : %simpossible de copier les données extraites pour « %.250s » vers « %.255s » : %simpossible de détourner des répertoiresimpossible de détourner le fichier $%s vers lui-mêmeimpossible d'extraire le fichier de configuration « %s » de « %s » : %simpossible d'extraire la partie d'un paquet découpé « %s » : %sImpossible de gérer le nommage de la sécurité.ne peut pas ouvrir « %.255s » (dans « %.255s »)ne peut pas ouvrir le fichier « %.250s » de l'archiveImpossible d'ouvrir le canal de notification pour l'état de sécurité.ne peut pas lire le répertoire du fichier de configuration « %.250s » (de « %.250s »)ne peut pas lire le répertoire infone peut pas supprimer « %.250s »impossible de supprimer l'architecture « %s »actuellement utilisée dans la base de donnéesimpossible de supprimer l'architecture non inconnue « %s »ne peut pas supprimer l'ancien fichier de configuration de secours « %.250s » (de « %.250s »)ne peut pas supprimer l'ancien fichier de configuration « %.250s » (= « %.250s »)ne peut pas supprimer la liste des anciens fichiersimpossible de renommer « %s » en « %s »ne peut satisfaire les pré-dépendances pour %.250s (réclamé par %.250s)ne peut pas parcourir le répertoire « %.255s »ne peut pas parcourir le répertoire de mises à jour « %.255s »ne sait pas comment satisfaire les pré-dépendances :
+ %simpossible de mettre en place le contexte de sécurité pour l'objet fichier « %s »impossible de définir un contexte d'exécution de sécurité pour le script du responsableimpossible de passer le membre de l'archive de contrôle dans « %s » : %simpossible de passer le membre de l'archive dans « %s » : %simpossible de passer le fichier « %.255s » (remplacé ou exclu ?) dans le tuyau : %simpossible de ne pas faire de complément (« padding ») pour le fichier « %.255s » : %simpossible depasse  l'en-tête d'un paquet découpé pour « %s » : %sne peut pas analyser « %.255s » (dans « %.255s »)analyse impossible du fichier « %s »impossible de supprimer de possibles zéros finaux (i.e. de « trailing ») : %scaractère « %c » non autorisé (seuls les lettres, les chiffres et « %s » le sont)les données compressées sont corrompuesle conffile « %.250s » n'apparaît pas dans le paquetle conffile « %.250s » n'est pas testable (stattable)le fichier de configuration « %s » n'est pas vraiment un fichiervisualisation des différences dans le fichier de configurationle fichier de configuration « %s » contient des espaces finauxLe fichier de configuration « %s » est dupliquéLe nom du fichier de configuration « %s » est trop long, ou bien il manque le saut de ligne final.processeur de commandes du fichier de configurationerreur de configuration : %s:%d : %sactions conflictuelles -%c (--%s) et -%c (--%s)détournements contradictoires impliquant « %.250s » ou « %.250s »paquets en conflit - %.250s non installétentative de déconfiguration de %s, qui serait cassé par %s...tentative de déconfiguration du paquet essentiel
+%s pour activer %sil est envisagé de retirer %s en faveur de %s...le répertoire de contrôle n'a pas les bonnes permissions %03lo (doit être >=0755 et <=0775)le répertoire « control » n'est pas un répertoirele fichier de contrôle « %s » n'existe pasle fichier de contrôle « %s » pour le paquet « %s » contient un nom de fichier videle fichier de contrôle « %s »  pour le paquet « %s » n'a pas de retour à la ligne en fin de fichierle fichier de contrôle contient %célément de contrôleinformations corrompues dans le fichier de format de base de données « %s »impossible d'ouvrir le fichier de journal « %s » : %simpossible d'analyser l'ancien fichier « %.250s ». Il n'a donc pas été effacé : %simpossible d'ouvrir le flux d'entrée « %i »l'alternative actuelle %s est inconnue, bascule vers %s pour le groupe de liens %sboucle détectée durant le traitement des actions différées :
+ listes des paquets qui en sont responsables (normalement) :élément de donnéesproblèmes de dépendances - actions différées non exécutéesproblèmes de dépendances - laissé non configuréproblème de dépendance - suppression ignoréedes problèmes de dépendances empêchent la configuration de %s :
+%sdes problèmes de dépendances empêchent le traitement des actions différées pour %s :
+%sun problème de dépendance empêche la suppression de %s :
+%sabandon du lien secondaire obsolète %s (%s)détournement par %s depuis : %s
+détournement par %s en : %s
+détournement de %s par %sdétournement de %s en %s par %sdétournement-vers ne peut pas contenir de retour chariotdétourné par %s vers : %s
+fait
+dégradation (« downgrade ») de %.250s depuis %.250s vers %.250sdpkg non enregistré comme installé, impossible de vérifier la gestion de %s.
+action différée en double « %.255s »fichier des actions différées demandées en double avec le nom « %.250s » pour le paquet « %.250s »chemin dupliqué %saction différée en double « %.255s »lien secondaire dupliqué %s%s est un nom secondaire dupliquévaleur en double pour le champ « %s »valeur en double pour le champ « %.*s » défini par l'utilisateurnom de champ vide« fgets » renvoie une chaîne vide en lisant les conffilesnoms vides interdits pour les actions différéesfin de fichier après le nom de champ « %.*s »fin de fichier avant la valeur du champ « %.*s » (il manque le saut de ligne final)fin de fichier dans la valeur du champ « %.*s » (il manque le saut de ligne final)fin de fichier sur l'entrée standard à l'invite de configurationépoque (« epoch »)l'époque (epoch) dans la version est négativel'époque (epoch) dans la version n'est pas un nombrel'époque (epoch) dans la version est trop grandeerreurerreur lors de la vérification de « %s »erreur de fermeture de %.250serreur lors de la fermeture du fichier de configuration « %.255s »erreur pendant la fermeture/écriture de « %.255s »erreur pendant la création du périphérique « %.255s »erreur pendant la création du répertoire « %.255s »erreur pendant la création du lien physique « %.255s »erreur pendant la création du nouveau fichier de sauvegarde « %s »erreur pendant la création du tube « %.255s »erreur pendant la création du lien symbolique « %.255s »erreur obtenue en voulant s'assurer que « %.250s » n'existe paserreur à l'exécution du point d'entrée (hook) « %s », code d'erreur %derreur de formatage de la chaîne dans la variable varbuferreur dans le format d'affichage : %serreur d'installation du nouveau fichier « %s »erreur lors de l'ouverture du fichier conffileserreur lors de l'ouverture du répertoire de configuration « %s »erreur de traitement de l'archive %s (--%s) :
+ %serreur de traitement du paquet %s (--%s) :
+ %serreur de lecture sur %.250serreur de lecture de %s depuis le fichier %.255simpossible d'ouvrir le fichier conffileerreur de lecture du tube de dpkg-deberreur de lecture du fichier des actions différées « %.255s »erreur lors de la suppression de l'ancien fichier de sauvegarde « %s »erreur de paramétrage des droits de « %.255s »erreur pendant la définition des droits du lien symbolique « %.255s »erreur de paramétrage des permissions de « %.255s »erreur de paramétrage des cachets de date de « %.255s »erreur survenue en essayant d'ouvrir %.250serreur signal %s non-capturé : %s
+erreur lors de l'écriture de « %s »erreur lors de l'écriture de « %s »erreur lors de l'écriture de « %s »erreur lors de l'écriture de la liste d'architectureserreur d'écriture sur « stderr », constatée avant l'invite de configurationéchec d'allocation mémoireimpossible d'allouer de la mémoire pour une nouvelle entrée dans la liste des paquets en échec : %simpossible de changer de répertoire vers « %.255s »échec de « chdir » vers le répertoireimpossible de changer de répertoire racine pour « %.250s »échec de la fermeture après lecture : « %.255s »impossible de créer le répertoireimpossible de créer un tubeéchec de dup sur fd %déchec de « dup » sur std%séchec de « fstat » sur un élément d'un fichier ar (%s)échec de « fstat » sur l'archiveéchec de « fstat » sur le fichier des détournementséchec de « fstat » sur le fichier des permissions (statoverride)échec de la création d'un fichier temporaire (%s)échec d'ouverture du fichier de configuration %.255s en lecture : %simpossible d'ouvrir fichier des détournementsla lecture du fichier « info » « %.255s » du paquet a échouéimpossible d'ouvrir fichier des permissions (statoverride)impossible d'ouvrir le fichier liste des actions différées demandées par le paquet « %.255s »échec de lectureéchec de la lecture « %.255s » (dans « %.255s »)impossible de lire l'archive « %.255s »impossible de supprimer le fichier de mise à jour incorporé %.255séchec de la suppression de mon propre fichier de mise à jour %.255séchec de « rewind » sur un fichier temporaire (%s)impossible de relire le fichier des actions différées demandées « %.255s »impossible d'accéderimpossible d'analyser (déréférencer) le lien symbolique existant « %.250s »impossible d'analyser (déréférencer) la cible proposée du nouveau lien symbolique « %.250s » pour le lien symbolique « %.250s »échec de « stat » sur un fichier temporaire (%s)impossible de délier un fichier temporaire (%s), %séchec d'écritureéchec de l'écriture de %s enregistrements de « %.50s » à « %.250s »échec de l'écriture des détails de « %.50s » sur « %.250s »l'écriture d'un nom de fichier à travers un tube tar (« %s ») a échoué« fgets » a renvoyé une chaîne vide provenant de « %.250s »Le nom de champ « %.*s » ne peut pas commencer par un tiret.le nom de champ « %.*s » doit être suivi de deux points (:)largeur de champ hors limitesle fichier « %.250s » a un numéro de version de format non valable : %sle fichier « %.250s » est corrompu - %.250s manquantle fichier « %.250s » est corrompu - mauvais code de contrôle MD5 « %.250s »le fichier « %.250s » est corrompu - mauvais nombre magique d'en-tête d'archivele fichier « %.250s » est corrompu - mauvais nombre de parties d'archivele fichier « %.250s » est corrompu - mauvais chiffre (code %d) dans %sle fichier « %.250s » est corrompu - mauvais nombre magique (« magic ») à la fin  du premier en-têtele fichier « %.250s » est corrompu - mauvais « magic » à la fin de la section d'en-têtele fichier « %.250s » est corrompu - mauvais nombre de parties d'archivele fichier « %.250s » est corrompu - mise en forme incorrecte : caractère (code %d)le fichier « %.250s » est corrompu - saut de ligne après %.250s manquantle fichier « %.250s » est corrompu - pas de barre oblique entre les numéros de parties d'archivele fichier « %.250s » est corrompu - caractères nuls rencontrés dans la section infole fichier « %.250s » est corrompu - le deuxième élément n'est pas un élément de donnéesle fichier « %.250s » est corrompu - mauvaise taille du nombre de parties citéesle fichier « %.250s » est corrompu - trop courtle fichier « %.250s » est corrompu - mauvais nombre de parties pour les tailles
+citéesle fichier « %.250s » a « %d.%d » pour version de format - besoin d'un dpkg-split plus récentle fichier « %.250s » n'est pas une partie de l'archivele fichier « %.250s » est corrompu ; entier hors limites dans %sle fichier « %s » n'est pas une partie d'archive
+le format de fichier n'est pas reconnule fichier ressemble à une archive
+ corrompue par un téléchargement en mode ASCIIle fichier ne doit pas contenir de retour chariotl'enregistrement du fichier des actions différées indique un nom de paquet illégal pour « %.250s » ( le nom du fichier est « %.250s » ) : %.250sle nom de fichier « %s » n'est pas absolules fichiers « %.250s » et « %.250s » ne sont pas des parties du même fichierla liste des fichiers pour le paquet « %.250s » contient un nom de fichier videla liste des fichiers pour le paquet « %.250s » n'a pas de retour à la ligne en fin de fichierle fichier contenant la liste des fichiers du paquet « %.250s » étant manquant, il est considéré qu'aucun fichier du paquet n'est actuellement installéforçage de la réinstallation de l'alternative %s car le groupe de liens %s est cassééchec de « fork »version de format suivie par n'importe quoiversion de format sans pointnuméro de version de formatversion de format sans composant principalversion de format sans composant secondairel'en-tête ar créé pour « %s » est corrompule groupe « %s » n'existe pasl'en-tête est trop long, ce qui rend la partie trop longue ; le nom du
+paquet ou le numéro de version doit être particulièrement long ; abandon%d avertissement ignoré sur le(s) fichier(s) « control »%d avertissements ignorés sur le(s) fichier(s) « control »problème ignoré, il est peut-être possible de continuer !conflit ignoré, il est peut-être possible de continuer malgré tout.problème de dépendance avec %s :
+%sproblème de pré-dépendance ignorérequête ignorée : suppression de %.250s, qui n'est pas installérequête pour supprimer %.250s ignorée, seuls les fichiers
+de configuration sont installés ; utiliser --purge pour les supprimer aussinom d'architecture illégal dans la spécification « %s:%s » : %snom de paquet attendu illégal « %.250s » : « %.250s »nom de paquet illégal à la ligne %d : %.250snom de paquet illégal dans l'action différée « %.255s » : %snom de paquet illégal dans la spécification « %s%s%s » : %snom d'action différée illégal « %.255s » : %sle format de la base de données d'informations (%d) est incorrect ou trop récent ; vous devriez essayer d'utiliser une version plus récente de dpkgLe fichier d'informations %s/%s n'est associé à aucun paquet.l'installation de %.250sinstallél'installation de %.250s casserait %.250s
+ et la déconfiguration n'est pas autorisée (--auto-deconfigure pourrait aider)l'installation de %.250s casserait un logiciel existanterreur interne (bogue)caractère invalide « %1$c » dans la taille du membre « %3$.16s » de l'archive « %2$.250s »caractère « %c » non valable dans la longueur du champcaractère non valable dans le numéro de révisioncaractère non valable dans le numéro de versionniveau de compression non valable pour -%c : %ldparamètres de compression non valables : %sversion de format deb non valable : « %s ».entier incorrect pour --%s « %.250s »syntaxe inconnue ou invalide dans le nom de l'action différée « %.255s » ( dans les actions différées demandées par le paquet « %.255s »)nom de paquet « %.255s » non valable dans le fichier des actions différées « %.255s »le fichier des permissions avec le gid %s est non valablele mode %s du fichier des permissions est non valablele fichiers des permissions avec l'uid %s est non valableétat non valablenom d'action différée non valable « %.250s » : « %.250s »ligne non terminée lors de la lecture de %sligne trop longue ou non terminée lors de la lecture de %sle lien %s est à la fois principal et secondairedétournement local depuis : %s
+détournement local de %sdétournement local de %s en %sdétournement localement en : %s
+détourné localement en : %s
+noms de fichiers longsle script « %.50s » du responsable n'a pas les bonnes permissions %03lo (doit être >=0755 et <=0775)le script « %.50s » du responsable n'est pas un simple fichier ou un lienle script « %.50s » du responsable n'est pas testable (stattable)échec de « malloc » (%zu octets)mode manuelficher maîtrelien maîtrela suppression de %s peut être problématique, puisqu'il fournit%s...ne doit pas être une chaîne videlimite d'utilisation de la mémoire atteinteerreur de correspondance dans divert-to
+  lors de la suppression de « %s »
+  « %s » trouvéerreur de correspondance sur paquet
+  lors de la suppression de « %s »
+  « %s » trouvéaccolade fermante manquantele paquet comporte un mélange d'instances installables simultanément ou pas ; cela est probablement la conséquence d'une mise à jour depuis une version non officielle de dpkgmulti-arch« Conflicts » et « Replaces » multiplesle paquet comporte des instances multiples non installables simultanément ; cela est probablement la conséquence d'une mise à jour depuis une version non officielle de dpkgforçages d'état (statoverrides) multiples pour le fichier « %.250s »doit être appelé depuis un script du responsable (ou avec l'option « --by-package »)doit commencer par un caractère alphanumériquedoit commencer par un caractère alphanumériquele nom %s est à la fois principal et secondairerequiert une option d'actionsaut de ligne dans le nom de champ « %.*s »nouvelle ligne non autorisée dans le nom d'objet « %.255s » de l'archivesaut de ligne non autorisé dans le nom de chemin « %s »Les retours chariot sont interdits dans des fichiers update-alternatives (%s)pas d'alternatives pour %spas de dérogation (« override ») présentepas d'information de paquet dans « %.255s »aucun paquet nommé « %s » n'est installé, configuration impossibleaucun paquet ne correspond à %saucun chemin ne correspond à %snon, %s est essentiel, il ne sera pas déconfiguré
+ pour autoriser %s.non, impossible d'effectuer %s (voir --auto-deconfigure) :
+%spas de contrôle du contenu de la zone de contrôlenon installénon installé mais la configuration restepas de suppression de %s car ce n'est pas un lien%s ne sera pas remplacé par un lienrien après les deux points (:) dans le numéro de la versionnom de paquet vide dans la liste --%s d'éléments séparés par des virgules « %.250s »nombre de parties d'archiveoption « --%s » obsolète ; les paquets indisponibles sont nettoyés automatiquementoption de forçage/refus « %s » obsolèteoption obsolète « --%s »l'ancien fichier de configuration « %.250s » était un répertoire vide et a été supprimél'ancien fichier « %.250s » est identique à plusieurs  nouveaux fichiers (à la fois « %.250s » et « %.250s »)l'ancienne version du paquet a un nom de fichier d'information commençant par « %.250s » trop longon ne peut utiliser que des versions exactes dans le champ « %s ».échec de l'ouverture du composant « %.255s » (dans %.255s) d'une manière inattenduemanque de mémoire pour une nouvelle entrée nettoyéemanque de mémoire pour une nouvelle entrée nettoyée avec beaucoup de paramètresmanque de mémoire pour un nouveau contexte d'erreurproblème contourné par utilisation de --force :le paquet %.250s est déjà installé et configuréle paquet %.250s n'est pas prêt pour la configuration
+ configuration impossible (état actuel « %.250s »)le paquet « %.250s » n'est pas prêt pour les traitement des actions différées
+ ( état actuel « %.250s » sans action différée en attente)le paquet %s %s ne peut pas être configuré parce que la version de %s est différente (%s)le paquet %s ne peut pas être configuré parce que %s n'est pas prêt (état actuel « %s »)le paquet %s contient une liste comme fichier d'informationle paquet %s requiert une réinstallation mais sera supprimé quand même, comme demandé.le paquet %s requiert une réinstallation, suppression annulée.le paquet %s était à garder (on hold), traitement en cours malgré tout comme demandéle paquet « %s » n'est pas disponiblepaquet « %s » n'est pas installéle paquet « %s » n'est pas installé et aucune information n'est disponiblearchitecture du paquetl'architecture du paquet (%s) ne correspond pas à celle du système (%s)le paquet contient un nom de fichier de contrôle trop long (commençant par « %.50s »)l'information de contrôle du paquet contient le répertoire « %.250s »l'information de contrôle du paquet « rmdir » de « %.250s » ne dit pas que ce n'est pas un répertoireextraction de l'information de contrôle du paquetpaquet détournant les autres vers : %s
+extraction de la valeur du champsomme de contrôle MD5 du fichier du paquetextraction de l'archive du système de fichiers du paquetpaquet dans l'état « %s » mais des actions différées sont à venirpaquet dans l'état « %s » mais aucune action différée n'est en attenteLe paquet est dans un état incohérent; vous devriez
+ le réinstaller avant d'essayer de le supprimer.le paquet est dans un état vraiment incohérent; vous devriez
+ le réinstaller avant de tenter de le configurer.le paquet ne peut pas contenir de retour chariotnom du paquetle nom de paquet contient des caractères qui ne sont pas des minuscules alphanumériques ou « -+. »contrôle de la signature du paquetnuméro de version du paquetla partie %d est manquantele fichier partie « %.250s » n'est pas un simple fichiertaille de partie beaucoup trop grande ou négativela taille de partie doit être d'au moins %d ko (pour autoriser les en-têtes)réussi
+collerle chemin ne peut contenir de caractère de retour à la ligne.problème de pré-dépendance - %.250s non installéprioritéla priorité est hors limitesla priorité doit être un entierla priorité de %s est hors limites : %spriorité de %s : %serreur de lecture dans %.250serreur de lecture dans « %.250s »erreur de lecture sur le fichier de configuration « %.255s »erreur de lecture sur l'entrée standarderreur de lecture sur l'entrée standard à l'invite de configurationlecteur du fichier d'informations de paquet « %.255s »lecture du fichier d'informations de paquet « %s » : %slecture du fichier des permissions « %.250s »fichier du paquet rassembléconcernant %s contenant %s, problème de pré-dépendance :
+%sconcernant %s contenant %s :
+%sla suppression de %.250ssuppression de l'architecture « %s » actuellement utilisée dans la base de donnéessuppression de l'alternative sélectionnée manuellement - bascule de %s vers le mode automatiquele renommage implique l'écrasement de « %s » avec
+  un fichier différent « %s », ce n'est pas autorisérenommage : suppression de l'ancien lien dupliqué « %s »l'opération demandée requiert les privilèges du superutilisateurcommande rm pour le nettoyagerecherché, mais aucun paquet trouvé (fichiers *.deb correspondant)<inconnue>configuration de la sélection automatique pour %splusieurs entrées d'information de paquet trouvées, une seule est autoriséeprocesseur de commandes pour déplacer des fichierscréation de %s abandonnée car le fichier associé %s (du groupe de liens %s) n'existe pasfichier secondairelien secondairelien secondaire identique au lien principal %snom du secondairele fichier source « %.250s » n'est pas un simple fichierréassemblage d'un paquet tronçonnéle fichier des permissions (« statoverride ») contient une ligne videle fichier des permissions (« statoverride ») contient une ligne finale videétatjournalisation de l'étatsuppression du / finalle sous-processus %s a retourné une erreur de sortie d'état %dla taille du lien symbolique '%.250s' est passée de %jd à %zderreur de syntaxe dans le fichier des actions différées « %.255s »impossible d'ouvrir fichier des permissions (« statoverride »)a besoin d'un seul paramètre , le nom de l'action différée (« trigger »)la cible est un répertoire - ne peut pas ignorer la vérification du fichier « control »il y a plusieurs versions de la partie %d - au moins « %.250s » et « %.250s »il n'y a pas de script dans cette nouvelle version du paquet - abandonil s'agit d'un paquet essentiel, qui ne doit pas être supprimé.pour revenir aux mises à jour automatiques, utiliser « %s --auto %s »trop d'erreurs, arrêtligne trop longue ou nouvelle ligne manquante dans « %.250s »erreur de syntaxe dans le fichier des actions différées demandées « %.255s » ; nom du fichier « %.255s » illégal : %.250snom d'action différée contenant un caractère invalideregistre des actions différées (« triggers ») pas encore présentdifféréle fichier CI des actions différées « %.250s » contient une syntaxe illégale dans l'action différée de nom « %.250s » : %.250sle fichier CI des actions différées contient la directive inconnue « %.250s »le fichier CI des actions différées contient une directive de syntaxe inconnuerépertoire pour les données d'actions différées (« triggers ») pas encore créébloqué en boucle sur le traitement des actions différées (« triggers »), abandontentative d'exécution du script du nouveau paquet à la place...tentative de remplacement de « %.250s », qui appartient aussi au paquet %.250s %.250stentative de remplacement de « %.250s », qui est la version détournée de « %.250s »tentative de remplacement de « %.250s », qui est la version détournée de « %.250s » (paquet : %.100s)tentative de remplacement du répertoire « %.250s » dans le paquet %.250s %.250s avec un élément de type différenttentative de remplacement de « %.250s », qui est différent d'autres instances du paquet %.250sdeux commandes spécifiées : --%s et --%simpossible de (r)ouvrir le fichier d'entrée « %.250s »impossible de changer le propriétaire du fichier cible « %.250s »impossible de vérifier l'existence de « %.250s »impossible de vérifier l'état de verrouillage du fichier « %s »impossible de vérifier l'existence de l'archive « %.250s »impossible de modifier les droits du lien symbolique de secours pour « %.255s »impossible de faire le ménage autour de « %.255s » avant d'installer une autre versionimpossible de fermer le fichier « %s »impossible de fermer le nouveau fichier « %.250s »impossible de fermer le nouveau fichier des actions différées « %.255s »impossible de fermer le nouvel état de « %.250s »impossible de créer « %.255s »impossible de créer « %.255s » (pendant le traitement de « %.255s »)impossible de créer le fichier « %s »impossible de créer le fichier « %.250s »impossible de créer un répertoire temporaireimpossible de créer le répertoire d'état des actions différées « %.250s »impossible de supprimer le fichier info de contrôle « %.250s »impossible de supprimer l'ancien répertoire  « %.250s » : %simpossible de supprimer le fichier de dépôt vidé « %.250s »impossible d'annuler « %.250s »impossible d'exécuter %s (%s)impossible de mettre en forme %.250svidage impossible de %.250s après la mise en formeimpossible de supprimer le fichier « %s »impossible de vider le nouveau fichier « %.250s »impossible d'éliminer le nouvel état de « %.250s »impossible de « fstat » le fichier sourceimpossible de synchroniser le nouvel état de « %.250s »impossible d'obtenir le descripteur de fichier pour le répertoire « %s »impossible d'ignorer le signal %s avant l'exécution de %.250simpossible d'installer « %.250s » comme « %.250s »impossible d'installer le (supposé) nouveau fichier info « %.250s »impossible d'installer le nouveau fichier info « %.250s » comme « %.250s »impossible d'installer le nouveau fichier des actions différées « %.255s »impossible d'installer une nouvelle version de « %.255s »impossible d'installer le nouvel état de « %.250s »impossible de déverrouiller %simpossible de créer un lien symbolique de secours de « %.255s » avant d'installer une nouvelle versionimpossible de créer un lien symbolique de secours pour « %.255s »impossible de déplacer ailleurs « %.255s » afin d'en installer une nouvelle versionimpossible d'ouvrir « %.255s »impossible d'ouvrir le répertoire « %s »impossible d'ouvrir le fichier « %s »impossible d'ouvrir un nouveau fichier de dépôt « %.250s »impossible d'ouvrir le fichier de sortie « %.250s »impossible d'ouvrir le fichier source « %.250s »impossible d'ouvrir le répertoire de contrôle temporaireimpossible d'ouvrir le fichier CI des actions différées « %.250s »impossible d'ouvrir le fichier des actions différées « %.255s »impossible d'ouvrir ou créer un nouveau fichier des actions différées « %.255s »impossible de lire le répertoire de dépôt « %.250s »impossible de lire le fichier des actions différées « %.250s »impossible de lire les drapeaux de descripteur de fichier pour %.250simpossible de lire le lien « %.255s »impossible de lire le fichier « %.250s »impossible de supprimer « %s »impossible de supprimer la copie de secours de « %.250s »impossible de supprimer le fichier source copié « %s »impossible de supprimer la version nouvellement extraite de « %.250s »impossible de supprimer la version nouvellement installée de « %.250s »impossible de supprimer la version nouvellement installée de « %.250s » pour permettre la réinstallation d'une copie de secoursimpossible de supprimer le fichier info obsolète « %.250s »impossible de changer le nom du fichier de dépôt « %.250s » en « %.250s »impossible de réouvrir le fichier « %.250s »impossible de réinstaller la copie de secours de « %.250s »impossible de supprimer « %.255s » de façon sûre.impossible de supprimer « %.255s » de façon sûreimpossible de supprimer l'ancien fichier « %.250s » de façon sûre : %sdéplacement impossible au début de %.250s après la mise en formeimpossible de paramétrer la mise en tampon sur le fichier de base de données %simpossible de positionner le drapeau « close-on-exec » pour %.250simpossible de paramétrer les permissions en exécution sur « %.250s »impossible de changer les permissions du fichier cible « %.250s »impossible d'utiliser « setenv » pour le script du responsableimpossible d'utiliser « setenv » pour les sous-processusimpossible d'analyser %s « %.250s »impossible d'analyser %s « %.250s » : %simpossible d'analyser « %.250s »impossible d'accéder au répertoire de contrôleimpossible d'analyser le fichier de configuration actuellement installé « %.250s »impossible d'analyser le nouveau fichier de configuration « %.250s », fourni avec la distributionimpossible d'analyser un autre nouveau fichier « %.250s »impossible d'analyser « %.255s » restauré avant d'installer une autre versionimpossible d'ouvrir le fichier source « %.250s »impossible d'analyser le fichier des actions différées « %.255s »impossible de synchroniser le répertoire « %s »impossible de synchroniser le fichier « %.255s »impossible de synchron « %.250s »impossible de synchroniser le nouveau fichier « %.250s »impossible de tronquer le nouvel état de « %.250s »impossible de déverrouiller %simpossible d'écrire le fichier « %s »impossible d'écrire le nouveau fichier « %.250s »impossible d'enregistrer le nouveau fichier des actions différées « %.255s »impossible d'écrire le descripteur de fichier d'état %dimpossible d'écrire le nouvel état de « %.250s »guillemets non appairés dans « %s »erreur inattendue de bzip2données inattendues après le paquet et la sélection à la ligne %dfin de fichier inattendue après le nom du paquet à la ligne %dfin de fichier inattendu avant la fin de la ligne %dfin de fichier inattendue dans %s dans %.255sfin de fichier inattendue dans le nom du paquet à la ligne %dfin de fichier ou de flux inattenduefin de fichier inattendue pendant la lecture de « %.250s »fin de fichier inattendue lors de la lecture de %sfin inattendue de l'entréefin de ligne inattendue après le nom du paquet à la ligne %dfin de ligne inattendue dans le nom du paquet à la ligne %dfin de ligne inattendue dans le fichier des permissions (« statoverride »)paramètre inconnu « %s »type de stratégie de compression inconnustratégie de compression « %s » inconnuetype de compression « %s » inconnuversion de format deb inconnue : « %s ».option de forçage/refus « %.*s » inconnueoption « %s » inconnueoption -%c inconnueoption --%s inconnueformat de sortie inconnu pour verify '%s'état désiré inconnu à la ligne %d : %.250sdépaqueté mais non configurétype de compression non géré prédéfinitype de compression « %s » non géré avec compression uniformeoptions non gérées dans l'en-tête du fichiertype de contrôle d'intégrité non géréle répertoire des mises à jour contient un fichier « %.250s » dont le nom est trop long (longueur=%d, max=%d)le répertoire des mises à jour contient des fichiers dont les noms sont de différentes longueurs (à la fois %d et %d)mise à jour de l'alternative %s car le groupe de liens %s contient des liens esclaves modifiésl'utilisateur « %s » n'existe pasnom de champ « %.*s » défini par l'utilisateur trop courtutilisation de « %s » pour fournir « %s » (%s) en mode automatiqueutilisation de « %s » pour fournir « %s » (%s) en mode manuelle champ « %s » contient une ligne mal formée « %.*s »valeur du champ « %s » non autorisée dans ce contextela vérification du paquet %s a échoué !la vérification du paquet %s a échoué, mais traitement en cours malgré tout
+comme demandé<aucune>version %.250s de %.250s déjà installée, paquet ignoré.mauvaise syntaxe de la version « %s »le numéro de version ne commence pas par un chiffrela chaîne de version contient des espacesla chaîne de version est vide« Provides » avec versionéchec de l'attente du sous-processus %savertissementlors de la lecture de %s : %slors de la suppression de %.250s, le répertoire « %.250s » n'était pas vide, donc il n'a pas été supprimélors de la suppression de %.250s, impossible de retirer « %.250s » : %s - peut-être le répertoire est-il un point de montage ?pas de dégradation de %.250s de la version %.250s vers l'ancienne %.250soui, déconfiguration de %s (cassé par %s).oui, suppression de %s en faveur de %s.vous devez spécifier les paquets par leur nom, et non par le nom des fichiers qui les contiennent
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/gl.gmo dpkg-1.20.7.1/po/gl.gmo
--- dpkg-1.20.7.1-orig/po/gl.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/gl.gmo	2021-06-09 18:25:14.850503269 -0500
@@ -0,0 +1,301 @@
+����<�!?�!a�!=S"&�"-�".�"#.&#U# q#4�#�#5�#-$.G$0v$1�$$�$4�$/3%c%({%$�%�%�%:	&6D&1{&1�&!�&('*'6'U')m'9�'.�''(&((3O(5�(�(�(�(�(�())#)8)I)X)-o)H�)Q�)A8*ez*f�*7G+<+B�+�+,
1, ?,`,5y,1�,�,�,#-!0-R-Ko-5�--�-!.A.5[.�.,�..�../4/HT/6�/(�/>�/<0�H0-�01[61g�1�240)43Z41�4�4�4*�425�75-�6/
+7]:7�7G�78�7,8K8(j8:�8 �8-�89�59�:��:��;�b<�-=�=��= |>5�>,�>$?%?-?9?E?6R?!�?.�?,�?@%&@L@%k@"�@&�@�@�@;
A3IA}AA�A�A&�A""BEEB,�B"�B-�B5	C,?CGlC�C*�C"�C D:D"RDuD�D*�DJ�DE"E=EUE-tE)�E%�E�EF)&FPFoF!�F!�F�F%�F%G;GXG!mG�G �G-�G#�G+H%KH$qH�H �H�H:�H!I;IWItI$�I�I�I�I�IJ/J!OJqJ5�J �J2�J%K@K0`K*�K/�K6�KV#L.zL(�L+�L)�L4(M4]M;�M<�M:N7FN0~N;�N?�N$+OAPO$�O!�O�Oc�O[P:yP<�P�P'�P4%Q)ZQ�Q	�Qk�Q/R"AR^dR@�R!S&S@SXSOqS8�S*�S%T7=T5uT!�T�T�T5U"6U4YU
�U �U%�UG�U?+V#kV7�V2�VY�VfTW4�WF�W17X;iX�X.�X.�X "YDCY�Y&�Y-�Y�Y.�Y'ZCZXZ)oZ�Z&�Z�Z�ZH[0Q[6�[4�[�[%\%4\Z\+o\+�\4�\F�\@C],�]R�]'^	,^Z6^4�^2�^�^G_Y]_+�_%�_1	`+;`Ng`3�`*�`a2/a+ba,�a�a"�a$�a*bIb*eb&�b3�b4�b5 c)Vc,�cD�c*�c4d&Rd#yd#�d%�d(�d.e9?e'ye*�e.�e�e!f4:f4of[�f,g4-g#bg,�g/�g+�g-h=hXh2ph&�hB�h.
i1<i3ni*�i6�i&j4+j1`j�j�j"�j�j�j(k:kSVkM�k(�k"!lDl`\l��l@Qn��nEo'Yo0�o*�o�o5�o'pFp3dp�p7�p:�p5$q/Zq)�q'�q1�q,r;r7Rr-�r$�r�rF�r>Cs5�s.�s%�s'
t5tAt at?�tB�t2u?8u0xu4�u4�uvv$v9vEv^v
ov}v�v�v�v4�vT�v^MwJ�wq�w~ix7�x@ yHay�y&�y�yz#zC?z9�z!�z*�z3
+{(>{g{V�{G�{8%| ^||8�|�|2�|@(}4i},�}J�}J~7a~A�~�~��~:�������+
�9�=U�=��Bу
�"�.�:M����@c�8��]݆;�L@�?��.͇*��3'�4[�+��F�����������������w�%0��V�+�B �Ec�$��Ώ׏���@�0V�2��7���G�.X�=��(ő:�,)�V�Xt�N͒0�FM�*��=��#��R!�<t�2��7�?�/\�Z��"�3
+�*>�i���4��ږ	�3��[/���&��ė!�9�K>�/��&���4��$,�$Q�#v�&����,��-
�7;�s�!��5�� ޚ9��,9�@f�*��1қ�$ �E�`Y���؜"��$�,@�m���+��"ם��$�'7�)_�O��,ٞA�&H�#o�D��:؟G�M[�i��9�-M�?{�5��C�N5�^��\�R@�N��W�Q:�]��5�\ �0}�-��2ܥ��'��A��L�M�/e�@��4֧�	"�u,�9��/ܨy�S��2ک
�&�;�_V�M��)�.�FN�;��.ѫ#�&$�HK�,��<����1�;=�ly�J�51�Mg�1��l�zT�;ϯh�Ct�u��.�7N�7��1��P�A�7R�8��	ò3Ͳ+�-�G�6c�$��N�� �/�VF�>��OܴJ,�4w�6��4��60�@g�V��?��;?�={�n��5(�	^�|h�J�M0�.~�F��X��CM�.��6��J��RB�E��3ۻ�B*�Am�<���2�->�?l� ��8ͽ+�G2�Kz�Gƾ3�5B�^x�<׿:�6O�/��+��2��8�?N�J��1��?�EK�#��-��<��< �r]�A��F�1Y�7��4��=��:6�!q���H��*��I�;g�9��F��3$�8X�,��9��6��/�%K�.q�����/��"�s&�^��>��8�!X�[z�3W{CM��rX#.v�0�v�&���)+G�orY�U`�1T:��6�dqA���`�a�X\6�����2_N�=yS����D@���hA�d����p��[������D�7B�Ii	�,f�Ue~"ER����k�<�:2�V;�|�x)@�[�3T,�/F0
+<�7s���u'R]�^�9PP�q�QQi�?�I��;Kb�!�J}��bL/�(�
+e���zjE�c���HBc�x$�|p%Zl-�^t Lz�{8.��S���*~W��8�$�n�o]ZK������un_9My�V���5t?wg*!�	l����'�O&����>���G�m�H(�
>���gh#f�m�5j����Y���\�+%w4FkJas��=�� �1"O
�CN�}-�4
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s to be configured is %s.
+ %d in %s:  %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+%s breaks %s%s conflicts with %s%s depends on %s%s enhances %s%s pre-depends on %s%s recommends %s%s suggests %s'%s' clashes with '%s''%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix; however:
+<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<package status and progress file descriptor>Authenticating %s ...
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NamePackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want Processing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+The following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Version[default=N][default=Y][no default]archive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerawaiting trigger processing by another packagebroken due to failed removal or installationbroken due to postinst failurecan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)couldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdiversion by %s from: %s
+diversion by %s to: %s
+divert-to may not contain newlinesdiverted by %s to: %s
+done
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesempty trigger names are not permittedepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror opening conffiles fileerror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind trigger interest file '%.250s'failed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to write details of '%.50s' to '%.250s'fgets gave an empty string from '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefork failedillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal pending trigger name '%.255s': %sinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinvalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'link %s is both primary and slavelocal diversion from: %s
+local diversion to: %s
+locally diverted to: %s
+maintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentspackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage diverts others to: %s
+package has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage may not contain newlinespackage name has characters that aren't lowercase alphanums or '-+.'part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepassed
+pre-dependency problem - not installing %.250spriority must be an integerread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package fileremoval of %.250srename involves overwriting '%s' with
+  different file '%s', not allowedrequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave link same as main link %ssource file '%.250s' not a plain filestatoverride file contains empty linestripping trailing /subprocess %s returned error exit status %dsyntax error in file triggers file '%.250s'target is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving uptoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers looping, abandonedtrying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)unable to (re)open input part file '%.250s'unable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to seek to start of %.250s after paddingunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to stat %s '%.250s'unable to stat '%.250s'unable to stat current installed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat triggers deferred file '%.250s'unable to truncate for updated status of '%.250s'unable to write new triggers deferred file '%.250s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptyyou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:49+0200
+Last-Translator: mvillarino <mvillarino@users.sourceforge.net>
+Language-Team: Galician <proxecto@trasno.net>
+Language: gl
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.11.4
+Plural-Forms: nplurals=2; plural=n != 1;
+
+ disparadores pendentes que son ou poderían ser irresolubles:
+
+O ficheiro de configuración "%s" non existe no seu sistema.
+A instalar o novo ficheiro de configuración pola súa petición.
+     A versión do paquete é a mesma que a da última instalación.
+     non é un ficheiro normal  %.255s
+  %.250s (versión %.250s) está presente e %s.
+  %.250s (versión %.250s) hase instalar.
+  %.250s está %s.
+  %.250s está instalado, pero é a versión %.250s.
+  %.250s non está instalado.
+  %.250s hase desconfigurar.
+  %.250s hase instalar, pero é a versión %.250s.
+  %.250s hase eliminar.
+  %.250s está desempaquetado, pero non se configurou.
+  %.250s está desempaquetado, pero é a versión %.250s.
+  %.250s ten de última versión configurada %.250s.
+  %.250s fornece %.250s e está presente e %s.
+  %.250s fornece %.250s e hase instalar.
+  %.250s fornece %.250s pero está %s.
+  %.250s fornece %.250s pero hase desconfigurar.
+  %.250s fornece %.250s pero hase eliminar.
+  %s (%s) fornece %s.
+  O paquete %s espera o procesamento dos disparadores.
+  O paquete %s aínda non está configurado.
+  O paquete %s non está instalado.
+  Hase eliminar o paquete %s.
+  O paquete %s que fornece %s espera o procesamento dos disparadores.
+  O paquete %s, que fornece %s, aínda non está configurado.
+  O paquete %s, que fornece %s, non está instalado.
+  Hase eliminar o paquete %s, que fornece %s.
+  A versión de %s no sistema é %s.
+  A versión de %s a configurar é %s.
+ %d en %s:   %s (%s) rompe %s e está %s.
+ %s (non é un ficheiro normal)
+ ==> Gárdase o ficheiro de configuración antigo por defecto.
+ ==> O distribuidor do paquete fornece unha versión actualizada.
+ ==> Emprégase o ficheiro actual como solicitou.
+ ==> Emprégase o novo ficheiro de configuración por defecto.
+ ==> Emprégase o novo ficheiro como solicitou.
+ A acción por defecto é instalar a nova versión.
+ A acción por defecto é gardar a versión actual.
+ e  depende de %s (subproceso): %s
+%s rompe %s%s ten conflictos con %s%s depende de %s%s mellora %s%s pre-depende de %s%s recomenda %s%s suxire %s"%s" choca con "%s"campo "%s", nome de paquete "%.255s" non válido: %scampo "%s", falla o nome do paquete, ou hai lixo onde se esperaba o nome dun paquetecampo "%s", referencia a "%.255s":
+ "%c" está obsoleto, empregue "%c=" ou "%c%c" no seu cantocampo "%s", referencia a "%.255s":
+ relación de versións %c%c incorrectacampo "%s", referencia a "%.255s":
+ coincidencia exacta implícita no número de versión, suxírese empregar "="campo "%s", referencia a "%.255s":
+ o valor da versión comeza por un carácter non alfanumérico, suxírese engadir un espazocampo "%s", referencia a "%.255s": versión sen rematarcampo "%s", erro de sintaxe trala referencia ao paquete "%.255s"(Tense en conta a desaparición de %s, que foi substituido totalmente).
+(A ler a base de datos ... (non hai unha descrición dispoñible), verqueuse a memoriaa opción -%c non toma un valora opción -%c toma un valor--%s --pending non toma ningún argumento que non sexa unha opción--%s --recursive precisa de alomenos un argumento de ruta--%s precisa do argumento de nome--%s precisa dos argumentos de nome e ruta--%s precisa dun argumento de nome de ficheiro .deb--%s precisa dun argumento de directorio--%s precisa dun só argumento--%s precisa dun directorio destino.
+¿Pode ser que teña que empregar dpkg --install?--%s precisa de alomenos un argumento de ficheiro de arquivo de paquete--%s precisa de alomenos un argumento de nome de paquetea opción --%s non toma un valora opción --%s toma un valor--%s toma como moito dous argumentos (.deb e directorio)--%s non toma ningún argumento--%s toma só un argumento (nome de ficheiro .deb)--auto precisa de exactamente un argumento de ficheiro de partes--auto precisa de que se empregue a opción --outputrelación incorrecta para --compare-versions--compare-versions toma tres argumentos: <versión> <relación> <versión>--search precisa de alomenos un argumento de patrón de nomes de ficheiros--split precisa dun argumento de nome de ficheiro orixe--split toma como moito un ficheiro orixe e un prefixo de destino; nembargantes:
+<deb> é o nome dun arquivo de formato Debian.
+<ficheiroc> é o nome dun compoñente de ficheiro administrativo.
+<campoc> é o nome dun campo do ficheiro "control" principal.
+
+<descriptor do ficheiro de estado e progreso dos paquetes>A autenticar %s ...
+Ordes:
+  --check-supported                Comproba se a versión actual de dpkg
+                                     ten soporte de disparadores.
+
+Ordes:
+  -s|--split <ficheiro> [<prefixo>]
+                                   Parte un arquivo.
+  -j|--join <parte> <parte> ...    Une varias partes.
+  -I|--info <parte> ...            Amosa información dunha parte.
+  -a|--auto -o <completo> <parte>  Autoacumula partes.
+  -l|--listq                       Lista de anacos perdidos.
+  -d|--discard [<ficheiro>]        Omite os anacos perdidos.
+
+Os operadores de comparación para --compare-versions son:
+  lt le eq ne ge gt       (tratan a versión baleira coma anterior a calquera);
+  lt-nl le-nl ge-nl gt-nl (tratan a versión baleira coma posterior a calquera);
+  < << <= = >= >> >       (só por compatibilidade cos ficheiros de control).
+
+%s de Debian, versión %s.
+Backend de arquivos de paquetes "%s" de Debian, versión %s.
+Programa de xestión de paquetes "%s" de Debian versión %s.
+Ferramenta para partir/unir paquetes de Debian "%s", versión %s.
+Borrouse %s.
+DescriciónApareceron erros ao procesar:
+O ficheiro "%.250s" non é parte dun arquivo multipartes.
+Sintaxe do formato:
+  Un formato é unha cadea que se ha amosar por cada paquete. O formato pode
+  incluír as secuencias de escape estándar \n (salto de liña), \r (retorno de
+  carro) ou \\ (barra invertida). Pódese incluír información dos paquetes
+  inserindo referencias variables aos campos do paquete empregando a sintaxe
+  ${var[;ancho]}. Os campos van aliñados á dereita a menos que a anchura sexa
+  negativa; neste caso hase empregar aliñamento á esquerda.
+A instalar a nova versión do ficheiro de configuración %s ...
+Ficheiros de lixo que quedan no directorio de armacén:
+Desempaquetouse máis dunha copia do paquete %s nesta execución.
+Só se configura unha vez.
+NomeO paquete %s está retido, non se toca. Empregue --force-hold para o facer.
+O paquete %s aparece máis dunha vez, só se procesa unha vez.
+O paquete %s non contén ningún ficheiro (!)
+Paquetes que aínda non se reensamblaron:
+Arquivouse a parte %d do paquete %s (aínda quedan O procesamento deteuse porque houbo erros de máis.
+Rexistrouse a información sobre %s de %s.
+A substituír a información de paquetes dispoñibles, empregando %s.
+A configurar %s (%s) ...
+Os seguintes paquetes están a agardar o procesamento de disparadores que
+activaron noutros paquetes. Este procesamento pódese solicitar empregando
+dselect ou dpkg --configure --pending (ou dpkg --triggers-only):
+Os seguintes paquetes están embarullados debido a problemas graves durante
+a instalación. Teñen que se reinstalar para que eles (e outros paquetes
+que dependan deles) funcionen correctamente:
+Os seguintes paquetes están só configurados a medias, seguramente debido
+a problemas ao configuralos a primeira vez. Debería volverse tentar a
+configuración empregando dpkg --configure <paquete> ou a opción de menú
+"configurar" de dselect:
+Os seguintes paquetes están só instalados a medias, debido a problemas
+durante a instalación. Seguramente se poida completar a instalación
+se se volve tentar; os paquetes pódense eliminar empregando dselect
+ou dpkg --remove:
+Disparáronse os seguintes paquetes, pero aínda non se realizou o procesamento
+dos disparadores. Pódese solicitar o procesamento dos disparadores empregando
+dselect ou dpkg --configure --pending (ou dpkg --triggers-only):
+Os seguintes paquetes desempaquetáronse pero non están configurados.
+Deben configurarse empregando dpkg --configure ou a opción de menú
+"configurar" de dselect para que funcionen:
+Escriba "exit" cando teña rematado.
+Escriba dpkg-deb --help para axuda sobre a manipulación de ficheiros *.deb;
+Escriba dpkg --help para axuda sobre instalación e desinstalación de paquetes.Escriba dpkg-split --help para obter axuda.Escriba dpkg-trigger --help para obter axuda sobre esta utilidade.A actualizar a información de paquetes dispoñibles, empregando %s.
+Emprego: %s [<opción> ...] <orde>
+
+Versión[por defecto=N][por defecto=Y][non hai opción por defecto]o arquivo contiña un obxecto "%.255s" de tipo 0x%x descoñecidoo arquivo non ten retornos de carro na cabeceiraa agardar a que outro paquete procese disparadoresroto debido a unha eliminación ou instalación fallidaroto por un fallo no postinstnon se pode facer mmap do ficheiro de información de paquetes "%.255s"non se pode eliminar o antigo script de postrmnon se atopou o ficheiro de información de paquetes "%.255s"non se pode abrir "%.255s" (en "%.255s")non se pode abrir o ficheiro de partes do arquivo "%.250s"non se pode ler o directorio de informaciónnon se pode eliminar "%.250s"non se pode eliminar a copia do antigo ficheiro de configuración "%.250s" (de "%.250s")non se pode eliminar o antigo ficheiro de configuración "%.250s" (= "%.250s")non se pode eliminar a antiga lista de ficheirsonon se poden satisfacer as predependencias de %.250s (debido a %.250s)non se pode explorar o directorio "%.255s"non se pode explorar o directorio de actualizacións "%.255s"non se atopa "%.255s" (en "%.255s")non se admite o carácter "%c" (só se admiten letras, números e caracteres "%s")o ficheiro de configuración "%.250s" non aparece no paquetenon se atopa o ficheiro de configuración "%.250s"as accións -%c (--%s) e -%c (--%s) teñen un conflictohai desvíos en conflicto que involucran a "%.250s" ou "%.250s"paquetes con conflictos - non se instala %.250so directorio de control ten uns permisos %03lo incorrectos (deben estar entre 0755 e 0775)non se puido abrir "%i" para fluxoproblemas de dependencias - déixase sen configurarproblemas de dependencias - non se eliminadesvío feito por %s desde: %s
+desvío feito por %s a: %s
+o destino do desvío non pode conter saltos de liñadesviado por %s a: %s
+rematado
+paquete cun disparador en espera duplicado "%.255s"disparador de interese nun ficheiro duplicado para o ficheiro "%.250s" e o paquete "%.250s"ruta %s duplicadadisparador pendente "%.255s" duplicadoligazón escrava %s duplicadavalor duplicado para o campo "%s"valor duplicado para o campo definido polo usuario "%.*s"recibiuse unha cadea baleira de fgets ao ler os ficheiros de configuraciónnon se admiten disparadores con nomes en brancoa época na versión non é un númeroerro ao pechar %.250serro ao pechar o ficheiro de configuración "%.255s"erro ao pechar ou gravar en "%.255s"erro ao crear o dispositivo "%.255s"erro ao crear o directorio "%.255s"erro ao crear a ligazón dura "%.255s"erro ao crear a canle "%.255s"erro ao crear a ligazón simbólica "%.255s"erro ao asegurarse de que "%.250s" non existeerro ao abrir o ficheiro de ficheiros de configuraciónerro ao ler %.250serro ao ler %s do ficheiro %.255serro ao ler o ficheiro de ficheiros de configuraciónerro ao ler da canle de dpkg-deberro ao ler o ficheiro de disparadores pospostos "%.250s"erro ao establecer o propietario de "%.255s"erro ao establecer o propietario da ligazón simbólica "%.255s"erro ao establecer os permisos de "%.255s"erro ao establecer as marcas de tempo de "%.255s"erro ao tentar abrir %.250serro ao des-capturar o sinal %s: %s
+erro ao gravar "%s"erro ao gravar no erro estándar, descubriuse antes de preguntar polo ficheiro de configuraciónnon se puido reservar memorianon se puido cambiar a "%.255s"non se puido cambiar ao directorionon se puido facer chroot a "%.250s"non se puido pechar despois de ler: "%.255s"non se puido crear o directorionon se puido crear unha canlea chamada a dup2 fallou para o descritor %da chamada a dup2 fallou para std%snon se atopou o arquivonon se atopou o ficheiro de desvíosnon se atopou o ficheiro "statoverride"non se puido abrir o ficheiro de desvíosnon se puido abrir o ficheiro de información de paquetes "%.255s" para lecturanon se puido abrir o ficheiro "statoverride"non se pode abrir o ficheiro de disparadores de interese "%.250s"non se pode ler "%.255s" (en "%.255s")non se puido ler o arquivo "%.255s"non se puido borrar o ficheiro de actualizacións incorporado %.255snon se puido eliminar o ficheiro de actualizacións %.255snon se pode retroceder no ficheiro de disparadores de interese "%.250s"non se puido atopar (desreferenciar) a ligazón simbólica existente "%.250s"non se puido atopar (desreferenciar) o novo destino proposto "%.250s" para a ligazón simbólica "%.250s"non se puideron gravar os detalles de "%.50s" en "%.250s"fgets devolveu unha cadea baleira de "%.250s"o nome de campo "%.*s" debe ir seguido dun signo de dous puntoso ficheiro "%.250s" está corrompido - falla "%.250s"o ficheiro "%.250s" está corrompido - suma MD5 "%.250s" incorrectao ficheiro "%.250s" está corrompido - díxito incorrecto (código %d) en "%s"o ficheiro "%.250s" está corrompido - número máxico incorrecto na fin da primeira cabeceirao ficheiro "%.250s" está corrompido - número máxic incorrecto na fin da segunda cabeceirao ficheiro "%.250s" está corrompido - carácter de recheo incorrecto (código %d)o ficheiro "%.250s" está corrompido - falla un retorno de carro tras "%.250s"o ficheiro "%.250s" está corrompido - hai caracteres nulos na sección de informacióno ficheiro "%.250s" está corrompido - o segundo membro non é un membro de datoso ficheiro "%.250s" está corrompido - o tamaño é incorrecto para o número de parte citadoo ficheiro "%.250s" está corrompido - curto de máiso ficheiro "%.250s" está corrompido - número de partes incorrecto para os tamaños citadoso ficheiro "%.250s" non é unha parte do arquivoo ficheiro "%s" non é unha parte do arquivo
+o nome do ficheiro non pode conter saltos de liñao rexistro de disparadores de ficheiro menciona o paquete de nome non válido "%.250s" (para un interese no ficheiro "%.250s"): %.250so nome de ficheiro "%s" non é absolutoos ficheiros "%.250s" e "%.250s" non son partes do mesmo ficheiroa lista de ficheiros do paquete "%.250s" contén un nome de ficheiro baleiroa chamada a fork fallounome de paquete non válido na liña %d: %.250snome de paquete non válido no disparador en espera "%.255s": %snome de disparador pendente "%.255s" non válido: %sinstalación de %.250sinstaladoa instalación de %.250s había romper %.250s, e
+ non se permite a desconfiguración (--auto-deconfigure pode axudar)a instalación de %.250s había romper software existentenúmero enteiro non válido para --%s: "%.250s"sintaxe non válida ou descoñecida no nome do disparador "%.250s" (nos disparadores de interese para o paquete "%.250s")nome de paquete "%.250s" non válido no ficheiro de disparadores pospostos "%.250s"a ligazón %s é primaria e escrava ao mesmo tempodesvío local desde: %s
+desvío local a: %s
+desviado localmente a: %s
+o script de mantedor "%.50s" ten uns permisos %03lo incorrectos (deben estar entre 0555 e 0775)o script de mantedor "%.50s" non é un ficheiro normal ou ligazón simbólicanon se atopa o script de mantedor "%.50s"non pode ser unha cadea baleiraincongruencia no destino do desvío
+  ao eliminar "%s"
+  atopouse "%s"incongruencia no paquete
+  ao eliminar "%s"
+  atopouse "%s"o nome %s é primario e escravo ao mesmo tempoprecísase dunha opción de acciónsalto de liña no nome de campo "%.*s"non se admiten saltos de liña nos ficheiros de update-alternatives (%s)non hai información de paquetes en "%.255s"non hai ningún paquete chamado "%s", non se pode configurarsen instalarsen instalar pero hai ficheiros de configuraciónnon hai hada despois dos dous puntos no número de versióna antiga versión do paquete ten un nome de ficheiro de información longo de máis, que comeza por "%.250s"a apertura do compoñente "%.255s" (en %.255s) fallou dun xeito inesperadoesgotouse a memoria para unha nova entrada de limpezaesgotouse a memoria para unha nova entrada de limpeza con argumentos de máiso paquete %.250s xa está instalado e configuradoo paquete %.250s non está listo para a súa configuración
+ non se pode configurar (estado actual "%.250s")o paquete %.250s non está listo para o procesamento dos disparadores
+ (estado actual "%.250s" sen disparadores pendentes)a arquitectura do paquete (%s) non coincide co sistema (%s)o paquete contén un nome de ficheiro de información de control longo de máis (que comeza por "%.50s")a información de control do paquete contiña o directorio "%.250s"a proba de borrar o ficheiro de control do paquete "%.250s" coma directorio non deu un erro por non ser un directorioo paquete desvía outros a: %s
+o paquete ten estado %s pero hai disparadores en esperao paquete ten estado %s pero hai disparadores pendenteso nome do paquete non pode conter saltos de liñao nome do paquete ten caracteres que non son alfanuméricos minúsculos ou "-+."falla a parte %do ficheiro de partes "%.250s" non é un ficheiro normalo tamaño da parte é grande de máis ou non é positivoaprobado
+problema de predependencias - non se instala %.250sa prioridade ten que ser un número enteiroerro de lectura en %.250serro de lectura en "%.250s"erro de lectura no ficheiro de configuración "%.255s"erro de lectura na entrada estándarerro de lectura na entrada estándar na pregunta do ficheiro de configuraciónficheiro de paquete reensambladoeliminación de %.250so cambio de nome supón sobrescribir "%s" co
+  ficheiro diferente "%s", non se permitea operación solicitada precisa de privilexios de superusuariobuscouse, pero non se atopou ningún paquete (ficheiros que encaixan con *.deb)atopáronse varias entradas de información do paquete, só se admite unhaa ligazón escrava é igual á ligazón principal %so ficheiro de orixe "%.250s" non é un ficheiro normalo ficheiro "statoverride" contén unha liña baleiraomítese o "/" ao finalo subproceso %s devolveu o estado de saída de erro %derro de sintaxe no ficheiro de disparadores de ficheiro "%.250s"o destino é un directorio - non se pode omitir a comprobación do ficheiro de controlhai varias versións da parte %d - alomenos "%.250s" e "%.250s"non hai un script na nova versión do paquete - abandónaseliña longa de máis ou falla un retorno de carro en "%.250s"erro de sintaxe no ficheiro de disparadores de interese "%.250s"; nome de paquete "%.250s" non válido: %.250so nome do disparador contén un carácter non válidodisparadoo ficheiro ci de disparadores "%.250s" contén unha sintaxe de disparador non válida no nome de disparador "%.250s": %.250so ficheiro ci de disparadores contén unha directiva descoñecida "%.250s"o ficheiro ci de disparadores contén unha sintaxe de directiva non coñecidaos disparadores están nun ciclo, abandónanseténtase sobrescribir "%.250s", que é a versión desviada de "%.250s"téntase sobrescribir "%.250s", que é a versión desviada de "%.250s" (paquete: %.100s)non se pode (volver) abrir o ficheiro de partes de entrada "%.250s"non se pode comprobar a existencia de "%.250s"non se pode comprobar a existencia do arquivo "%.250s"non se pode cambiar o propietario da copia da ligazón simbólica "%.255s"non se pode limpar o barullo que rodea a "%.255s" antes de instalar outra versiónnon se pode pechar o novo ficheiro de disparadores pospostos "%.250s"non se pode pechar o estado actualizado de "%.250s"non se pode crear "%.255s"non se pode crear o directorio de estado dos disparadores "%.250s"non se pode borrar o ficheiro de información de control "%.250s"non se pode borrar o ficheiro de armacén empregado "%.250s"non se pode descartar "%.250s"non se pode encher %.250s con caracteres de recheonon se pode baleirar %.250s despois do recheonon se pode baleirar o buffer co estado actualizado de "%.250s"non se atopa o ficheiro de orixenon se pode sincronizar o estado actualizado de "%.250s"non se pode instalar "%.250s" coma "%.250s"non se pode instalar o (suposto) novo ficheiro de información "%.250s"non se pode instalar o novo ficheiro de información "%.250s" coma "%.250s"non se pode instalar o novo ficheiro de disparadores pospostos "%.250s"non se pode instalar unha nova versión de "%.255s"non se pode instalar o estado actualizado de "%.250s"non se pode facer unha copia da ligazón simbólica "%.255s" antes de instalar a nova versiónnon se pode facer unha copia da ligazón simbólica "%.255s"non se pode apartar "%.255s" para instalar a nova versiónnon se pode abrir o novo ficheiro de armacén "%.250s"non se pode abrir o ficheiro de saída "%.250s"non se pode abrir o ficheiro orixe "%.250s"non se pode abrir o directorio de control temporalnon se pode abrir o ficheiro ci de disparadores "%.250s"non se pode abrir o ficheiro de disparadores pospostos "%.250s"non se pode abrir/crear o novo ficheiro de disparadores pospostos "%.250s"non se pode ler o directorio de armacén "%.250s"non se pode ler o ficheiro de disparadores de ficheiro "%.250s"non se puido ler os modificadores do descritor de ficheiros de %.250snon se pode ler a ligazón "%.255s"non se pode ler o ficheiro de partes "%.250s"non se pode eliminar a versión recén extraída de "%.250s"non se pode eliminar a versión recén instalada de "%.250s"non se pode eliminar a versión recén instalada de "%.250s" para permitir a reinstalación da copia de seguridadenon se pode eliminar o ficheiro de información obsoleto "%.250s"non se pode cambiar o nome do ficheiro de armacén "%.250s" a "%.250s"non se pode reabrir o ficheiro de partes "%.250s"non se pode recuperar a copia de seguridade de "%.250s"non se pode ir ao comezo de %.250s despois do recheonon se puido establecer o modificador close-on-exec de %.250snon se poden establecer permisos de execución en "%.250s"non se pode atopar o %s "%s.250s"non se atopa "%.250s"non se atopa o ficheiro de configuración instalado actualmente "%.250s"non se atopou outro ficheiro novo "%.250s"non se pode atopar o "%.255s" restaurado antes de instalar outra versiónnon se atopou o ficheiro de disparadores pospostos "%.250s"non se pode truncar para o estado actualizado de "%.250s"non se pode gravar no novo ficheiro de disparadores pospostos "%.250s"non se pode gravar o estado actualizado de "%.250s"datos inesperados tralo paquete e selección na liña %dfin de ficheiro inesperado en "%s" en %.255sfin de liña inesperada tralo nome do paquete na liña %dfin de liña inesperada no nome do paquete na liña %dargumento "%s" descoñecidotipo de compresión "%s" descoñecidoopción de forzar/rexeitar "%.*s" descoñecidaopción -%c descoñecidaopción --%s descoñecidaestado desexado non válido na liña %d: %.250sdesempaquetado pero sen configuraro directorio de actualizacións contén o ficheiro "%.250s", que ten un nome longo de máis (lonxitude=%d, máx=%d)o directorio de actualizacións contén ficheiros con nomes de lonxitudes diferentes (%d e %d)o nome do campo definido polo usuario "%.*s" é curto de máisa cadea de versión ten espazosa cadea de versión está baleiradebe especificar os paquetes polos seus nomes, non polos nomes dos ficheiros nos que viñan
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/hu.gmo dpkg-1.20.7.1/po/hu.gmo
--- dpkg-1.20.7.1-orig/po/hu.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/hu.gmo	2021-06-09 18:25:14.891503332 -0500
@@ -0,0 +1,246 @@
+��<�	��paq=�&.8g.x� �4�55-k.�1�$�4/T$���6�1 1R!���)�9�..']&�3�5�  ) > -U H� Q� A!e`!f�!7-"<e"�"�" �"�"5#1D#v#�##�#!�#�#K$5P$-�$!�$�$5�$&%,>%.k%.�%�%H�%62&(i&>�&�&��&�'g�')*04*3e*1�*�*�**�*2+�B+-�,/-]E-�-G�-8�-,).V.:u. �.-�.�.�/��/��0�s12�>2 �2,�2$353=3I3U36b3!�3�3%�34%4"E4&h4�4�4;�43�415AN5�5&�5"�5E�5,?6"l6-�65�6,�6G 7h7*�7"�7"�7�788&8>8-]8)�8�8�8)�8929!Q9!s9�9%�9%�9�9:!0:R: o:#�:+�:%�:$;+; G;h;{;�;�;$�;�;<'<?<!_<�<5�< �<%�<=0==*n=.�=+�=)�=4>4S>;�><�>:?7<?0t?;�??�?$!@AF@$�@!�@�@�@:A<FA�A\�A'�A	B"B!ABcBO|B8�B*C0C7HC5�C!�C�C�C5D"AD4dD
�D �D%�DG�D?6E2vEY�E4FF8FF �FD�FG&G->G.lG�G�G)�G�GHH,H0uH6�H4�HI%2I%XI~I+�I4�IF�I@;J+|J%�J1�J*K+K+EK,qK�K"�K$�K*L,L*HL&sL3�L4�L)M,-MDZM4�M&�M#�M#N%CN'iN.�N�N!�N4�N44O[iO,�O4�O#'P,KP/xP-�P�P�P2	Q&<Q1cQ*�Q6�Q4�Q1,R^RtR"�R�R�R(�RSS"SMvS(�S"�ST(T`0T��TJ?VF�V'�V1�V
+W+9WeW%�W5�W#�W9X(;X3dX2�X�X,�X.Y!FY!hY �Y)�Y0�Y0Z%7Z
]ZkZ3�Z(�Z4�Z2[+F[0r[6�[�[�[�[\1 \>R\X�\E�\^0]l�];�]>8^w^�^�^�^7�^7_O_)j_(�_'�_�_U�_8T`-�` �`�`/�`)a/Da(ta$�a"�aH�a=.b1lb9�b�b��b�c��cb,e�f5�f.�f6gBgQg&Zg7�gs�g*-i2XiU�i�ig�i=Nj5�j)�j,�j+kDEk�k��k�4lm�'n%�n�o"�oH�o)�o%p-pBpXp8mp&�p�p.�p,q%Fq,lq0�q!�q�qHr?Pr)�rG�r%s5(s*^sK�s/�s"t.(t<Wt,�tU�t)u4Au#vu%�u�u�u�u�u v13v4ev�v�v0�v2w25w5hw6�w/�w:x&@x%gx�x&�x#�x!�x1yACy*�y3�y�y!�y!z6zUz"rz-�z"�z�z{#!{.E{)t{;�{-�{'|'0|/X|4�|.�|�|+
+}L6}1�};�}N�}<@~<}~5�~@�~N1&�T�(�%%�!K�m�9��@Ā	�;�%K�q�/}�"��ЁM�E;�-����FǂC�!R�t���7��*�5�F�2V�'��O��M�6O�F��4ͅF�"I�"l�S���#��-�,I�'v���*��$�	�Y%�/�4��3�$�%=�)c���&��F��C�7L�.��"��8֊8�H�1e�;��Ӌ*��0�:L���6��3݌B�@T�.��:čU��CU�5��(ώ)��9"�*\�3��'��#�B�BJ�j��8��B1�-t�8��1ۑ5
�C�[�?p�)��6ڒ5�<G�1��.�����3�R�m�.�� ��SڔL.�;{�$��ܕ�I����7I��"9g-,��*���3��!/�s��������be0��j����z��N"4��F���(�<k���:Z�E�	J�2	\�5l�4�|&mV6�U8��Q1��G�O�<*'�B���R8���v��'5�C!�u�0HSyh&1��@X:�����++�;�%t������x;]��P� n�6���$M[��Ti�������?`�� ��o)w��q=
+a���
-�/.�>�
+�{W����2�A�fL�7�%��K#�9�)�}^d,(D�~c���
��_r.�Y�$3�p#
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+ %d in %s:  %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+'%s' clashes with '%s''%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Reading database ... (no description available)-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix; however:
+<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+Authenticating %s ...
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NamePackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Processing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Version[default=N][default=Y][no default]archive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerbroken due to postinst failurecan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)couldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdivert-to may not contain newlinesdiverted by %s to: %s
+done
+duplicate path %sduplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror opening conffiles fileerror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'failed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to write details of '%.50s' to '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefork failedignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)illegal package name at line %d: %.250sinstalledinvalid integer for --%s: '%.250s'link %s is both primary and slavelocally diverted to: %s
+maintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected waypackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package diverts others to: %s
+package may not contain newlinespackage name has characters that aren't lowercase alphanums or '-+.'part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepre-dependency problem - not installing %.250spriority must be an integerread error in %.250sread error in configuration file '%.255s'read error on standard inputreassembled package filerename involves overwriting '%s' with
+  different file '%s', not allowedrequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave link same as main link %ssource file '%.250s' not a plain filestatoverride file contains empty linestripping trailing /subprocess %s returned error exit status %dtarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upunable to (re)open input part file '%.250s'unable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to delete control info file '%.250s'unable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to move aside '%.255s' to install new versionunable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to read depot directory '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to seek to start of %.250s after paddingunable to set execute permissions on '%.250s'unable to stat %s '%.250s'unable to stat '%.250s'unable to stat current installed conffile '%.250s'unable to stat other new file '%.250s'unable to truncate for updated status of '%.250s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywarningyou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-06-26 16:11+0200
+Last-Translator: SZERVÁC Attila <sas@321.hu>
+Language-Team: Hungarian <debian-l10n-hungarian@lists.debian.org>
+Language: hu
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Poedit-Language: Hungarian
+X-Poedit-Country: HUNGARY
+Plural-Forms: nplurals=1; plural=0;
+
+Nincs `%s' beállító fájl a rendszeren.
+Kérésedre újat telepítek.
+     A csomagban lévő változat megfelel a legutóbb telepítettnek
+     nem sima fájl             %.255s
+  %.250s (%.250s verzió) telepítésre jelölt.
+  %.250s %s.
+  %.250s telepített, de verziója %.250s.
+  %.250s nincs telepítve.
+  %.250s dekonfigurálásra jelölt.
+  %.250s telepítésre jelölt, de verziója %.250s.
+  %.250s eltávolításra jelölt.
+  %.250s is kibontva, de sosem került konfigurálásra.
+  %.250s kibontva, de verziója %.250s.
+  %.250s legutolsó beállított verziója %.250s.
+  %.250s adja %.250s-t és telepítésre jelölt.
+  %.250s adja %.250s-t de %s.
+  %.250s adja %.250s-t de dekonfra jelölt.
+  %.250s adja %.250s-t de törlésre jelölt.
+  %s csomag még beállítatlan.
+   `%s' csomag nincs telepítve.
+  %.s eltávolításra jelölt.
+  %.s, mely %s-t adja nincs beállítva.
+  `%s' csomag, mely %s-t adja nincs telepítve.
+  %.s, mely %s-t adja eltávolításra jelölt.
+  %s rendszeren lévő verziója %s.
+ %d itt: %s:  %s (nem sima fájl)
+==> Régi fájl megtartása alapértelmezettként.
+ ==> A csomag terjesztője frissített.
+ ==> Kérésedre a mostani régi fájlt használom.
+ ==> Új fájl használata alapértelmezettként.
+ ==> Kérésedre az új fájlt használom.
+ Az alapművelet az új változat telepítése.
+ Az alapművelet a jelenlegi változatod megtartása.
+ és függőségek: %s (alfolyamat): %s
+`%s' ütközik ezzel: `%s'`%s' mező, érvénytelen `%.255s' csomagnév: %s`%s' mező, hiányzó csomagnév vagy torlódás annak helyén`%s' mező, hivatkozás erre: `%.255s':
+ `%c' elavult, használd a `%c='-t vagy `%c%c'-t`%s' mező, hivatkozás erre: `%.255s':
+ rossz verzió reláció %c%c`%s' mező, hivatkozás erre: `%.255s':
+ valójában pontos verzióra hivatkozik, `=' javasolt`%s' mező, hivatkozás erre: `%.255s':
+ a verzió érték nem-alfanumerikussal kezdődik, szóköz javasolt`%s' mező, hivatkozás erre: `%.255s': lezáratlan verzió`%s' mező, nyelvtani hiba e csomaghivatkozás után: `%.255s'(Adatbázis olvasása ... (nincs leírás)A -%c opció nem vár értéketA -%c opció értéket vára --%s --pending nem fogad non-opcionális argumentumot--%s --recursive legalább 1 ösvény argumentumot vár--%s számára <név> kell--%s számára <név> és <ösvény> kell--%s egy .deb fájlnév argumentmot vár--%s egy <könyvtár> argumentumot vár--%s 1 argumentumot vár--%s egy célkönyvtárat igényel.
+Lehet, hogy a dpkg --install-t kell használnod ?--%s legalább 1 csomagarchívum fájl argumentumot vára --%s legalább 1 csomagnév argumentot várA --%s opció nem vár értéketA --%s opció értéket vár--%s 2 argumentumot fogad (.deb és könyvtár)--%s nem vár argumentumot--%s csak 1 argumentumot fogad (.deb fájlnév)a --auto 1 rész fájl argumentumot vára --auto a --output opciót igénylirossz --compare-versions relációa --compare-versions 3 argumentumot vár: <version> <relation> <version>A --search legalább 1 fájlnév mintát vár argumentumkénta --split egy forrás fájlnév argumentumot vára --split egy forrás fájlnevet és cél előtagot fogad; ám:
+A <deb> egy Debian formátumú archívum fájlneve.
+A <cfile> egy adminisztratív fájl összetevő neve.
+A <cfield> Egy a fő `control' fájlban használt mező neve.
+
+%s hitelesítése ...
+Parancsok:
+  -s|--split <fájl> [<előtag>]     Archívum szétvágása.
+  -j|--join <rész> <rész> ...      Részek összerakása.
+  -I|--info <rész> ...             Egy rész adatainak kiírása.
+  -a|--auto -o <teljes> <rész>    Részek automata összehozása.
+  -l|--listq                       Nem illő elemek listája.
+  -d|--discard [<fájlnév> ...]    Nem illő elemek elvetése.
+
+A --compare-versions kapcsoló összehasonlító operátorai:
+ lt le eq ne ge gt       (üres verzió kezelése minden verziónál korábbiként);
+ lt-nl le-nl ge-nl gt-nl (üres verzió kezelése minden verziónál későbbiként);
+ < << <= = >= >> >       (csak a control fájl szintaxisával való kompatibilitás
+                            miatt).
+
+Debian %s %s verzió.
+Debian `%s' csomag archívum háttér %s változat .
+Debian `%s' csomagkezelő program %s verzió.
+Debian `%s' csomag vágó/fűző eszköz; %s verzió.
+%s törölve.
+LeírásHibák történtek a feldolgozáskor:
+`%.250s' fájl nem egy több részes archívum része.
+Formátum nyelvtan:
+  A formátum egy füzér, mely minden csomagra kimegy. A forma
+  szabvány escape sorokat is tartalmazhat, például: \n (újsor), \r (kocsi
+  vissza) vagy \\ (sima per). Csomag adatok a csomag
+  mezőire utaló változókkal szúrhatók be a ${var[;width]} szintaxis
+  által. A mezők jobbra igazítottak, ha a szélesség negatív, akkor
+  balra.
+Új beállító fájl telepítése %s ...
+Szemét fájlok maradtak a raktár könyvtárban:
+A(z) %s csomag több másolata kicsomagolt egy körben !
+ Csak egyszer állítom be.
+NévVisszafogásban lévő csomag: %s, nem módosítom. Használd a --force-hold-ot a felülbíráláshoz.
+E csomag: %s többször szerepel, csak egyszer dolgozom fel.
+A(z) `%s' csomag nem tartalmaz semmilyen fájlt (!).
+Még nincsenek újragyűjtve a csomagok:
+A feldolgozás túl sok hiba miatt leállt.
+%s információit rögzítettem innen: %s.
+Az elérhető (available) csomagok listájának cseréje ezzel: %s.
+Beállítás: %s (%s) ...
+Az alábbi csomagok fontos telepítési gondok miatt kuszák.
+Újra kell telepíteni őket (és a tőlük függőket) a helyes működéshez:
+Az alábbi csomagok fél-beállítottak, valószínűleg az 1. beállítás alatti hibák miatt.
+A beállítás újra megkísérelhető a dpkg --configure <package> paranccsal
+vagy egy aptitude-hoz, dselect-hez hasonló
+felülettel:
+Az alábbi csomagok félig telepítettek, a telepítés alatti hibák miatt.
+A telepítés valószínűleg befejezhető újra megkísérlésével;
+a csomagok a dpkg --remove paranccsal vagy
+egy aptitude-hoz, dselect-hez hasonló felülettel el is távolíthatók:
+Az alábbi csomagok kicsomagoltak, de nincsenek beállítva.
+A dpkg --configure paranccsal vagy egy aptitude-hoz, dselect-hez hasonló
+felülettel be kell állítani őket a működéshez:
+Írd be az `exit'-et, ha kész vagy.
+A dpkg-deb --help súg a *.deb fájlok kezeléséről;
+A dpkg --help súg csomagok telepítéséről/eltávolításáról dpkg-val.A dpkg-split --help parancs segítAz elérhető (available) csomagok listájának frissítése ezzel: %s.
+Használat: %s [<opció> ...] <parancs>
+
+Verzió[alapművelet=N:nem][alapművelet=Y:igen][nincs alapművelet]az archívum `%.255s' objektuma ismeretlen 0x%x típusúnincs újsor az archívum fejlécébenpostinst hiba miatt töröttnem tudom mmapolni `%.255s' csomag info fájltnem tudom törölni a régi postrm szkriptetnem lelem `%.255s' csomag info fájlt`%.255s' nem nyitható meg (ebben: `%.255s')nem megnyitható archívum rész fájl: `%.250s'az info könyvtár nem olvashatónem törölhető: `%.250s'`%.250s' (ezé: `%.250s') régi mentett konfig fájl eltávolíthatatlannem tudom törölni a régi `%.250s' (= `%.250s') konfig fájltnem tudom törölni a régi fájl listátteljesítetlen elő-függőségek ehhez: %.250s (%.250s miatt kellenek)`%.255s' könyvtár nem nézhető átnem tudom átnézni az updates könyvtárat: `%.255s'`%.255s' nem található (ebben: `%.255s')`%c' karakter tilos (csak betűk, számok és `%s' karakterek adhatók meg)úgy fest, `%.250s' konffájl nincs a csomagban`%.250s' konffájl nem találhatóütköző műveletek -%c (--%s) and -%c (--%s)`%.250s'-t vagy `%.250s'-t érintő ütköző eltérítésekütköző csomagok - nem telepítem %.250s-taz ellenőrző könyvtárnak hibás %03lo jogai vannak (>=0755 és <=775 kell legyen)`%i' nem nyitható meg az áramoltatásrafüggőségi hibák - e csomag beállítatlan maradtfüggőségek vannak - nem törlömdivert-to nem tartalmazhat újsorokateltérítve %s által ide: %s
+kész
+kettős %s ösvénykettős %s szolga lánckettős érték e mezőben: `%s'kettős érték e felhasználói mezőben: `%.*s'üres szöveg az fgets-ből a konffájl olvasásakorhiányzó szám a verzióbanhiba %.250s bezárásakorhiba e beállító fájl lezárásakor: `%.255s'hiba az alábbi lezárásakor/írásakor: `%.255s'hiba az alábbi eszköz létrehozásakor: `%.255s'hiba az alábbi könyvtár létrehozásakor: `%.255s'hiba az alábbi merev lánc létrehozásakor: `%.255s'hiba az alábbi cső létrehozásakor: `%.255s'hiba az alábbi jelképes lánc létrehozásakor: `%.255s'hiba `%.250s' hiánya ellenőrzésekorhiba a conffiles fájl megnyitásakorolvasási hiba: %.250shibás %s olvasás e fájlból: %.255shiba a conffiles fájl olvasásakorhiba a dpkg-deb cső olvasásakornem sikerült beállítani `%.255s' tulajdonosáthiba az alábbi jlánc tulajdonosának beállításakor: `%.255s'nem sikerült beállítani `%.255s' jogaitnem sikerült beállítani `%.255s' időpecsétjéthiba %.250s megnyitásakorhiba a %s jel elengedésekor: %s
+hiba `%s' írásakorsikertelen chdir ide: `%.255s'hiba a könyvtárváltáskormeghiúsult a chroot ide: `%.250s'sikertelen lezárás olvasás után: `%.255s'sikertelen könyvtár létrehozása cső létrehozása sikertelensikertelen archívum fstateltérítés fájl fstat sikertelennem sikerült fstat-olni a statoverride fájlteltérítés fájl megnyitása sikertelennem tudtam megnyitni `%.255s' csomag info fájlt olvasásranem sikerült megnyitni a statoverride fájlt`%.255s' olvasási hiba (itt: `%.255s')sikertelen archívum olvasás: `%.255s'nem tudom törölni a beépített %.255s fájlte frissítő fájlom törlése nem sikerült: %.255s`%.50s' részletei nem írhatók ide: `%.250s'`%.*s' mezőnév után : kellE fájl: `%.250s' hibás - %.250s hiányzikAz alábbi fájl: `%.250s' sérült - rossz MD5 ellenőrzőösszeg: `%.250s'`%.250s' hibás - rossz szám (%d kód) ebben: %s`%.250s' hibás - rossz bűvös szám az 1. fejléc végénAz alábbi fájl: `%.250s' sérült - rossz varázs a második fejléc végénE fájl: `%.250s' hibás - rossz behúzó karakter (%d kód)E fájl: `%.250s' hibás - hiányzó új sor ezután: %.250sE fájl: `%.250s' hibás - nullák az info szakaszbanAz alábbi fájl: `%.250s' sérült - a második tag nem adattagAz alábbi fájl: `%.250s' sérült - a méret rossz az idézett részszámhozE fájl: `%.250s' hibás - túl rövidAz alábbi fájl: `%.250s' sérült - a részek száma rossz az idézett méretekhezA `%.250s' fájl nem egy archívum részA `%s' fájl nem egy archívum rész
+fájl nem tartalmazhat újsorokat"%s" fájlnév nem abszolúta két fájl: `%.250s és `%.250s' nem ugyanannak részeie csomag: `%.250s' fájllista fájlja üres fájlnevet tartalmazfork hiba%d figyelmeztetés átlépése az ellenőrző fájl(ok)rólrossz csomagnév a %d. sorban: %.250stelepítettérvénytelem egész a --%s számára: `%.250s'%s elsődleges és szolga lánc ishelyben eltérítve ide: %s
+`%.50s' karbantartói szkript jogok hibásak (%03lo) (>=0555 és <=0775 kell)A karbantartói szkript (`%.50s') nem sima fájl vagy jelképes lánc`%.50s' karbantartói szkript nem találhatónem lehet üres szövegnem-illeszkedő divert-to
+  `%s' eltávolításakor
+  `%s'-t találtamnem-illeszkedő csomag
+  `%s' eltávolításakor
+  `%s'-t találtam%s elsődleges és szolga név isegy művelet opciót igényelúj sor e mezőben: `%.*s'újsorok tilosak az update-alternatives fájlokban (%s)nem találok csomag infót ebben: `%.255s'nincs `%s' csomag telepítve, így nem beállíthatónem telepítettnem telepített, de beállításai még ott vannaknincs semmi a : után a verziószámbana csomag régi verziójában túl hosszú info fájlnév van, kezdete: `%.250s'`%.255s' összetevő megnyitása (ebben: %.255s) váratlan módon meghiúsultA(z) %.250s csomag már települt és be van állítvaA(z) %.250s csomag nem beállítható
+ (jelenlegi állapota: `%.250s')a csomag géptípusa (%s) eltér a rendszertől (%s)a csomagban túl hosszú control info fájlnév van (kezdete: `%.50s')csomag eltérít másokat ide: %s
+csomag nem tartalmazhat újsorokata csomagnév kisbetűs alfanumerikus és `-+.'-tól eltérő karaktereket tartalmazhiányzó %d. rész`%.250s' rész fájl nem sima fájla rész mérete bőven túl vagy nem pozitívelő-függőségi gond - %.250s nem települaz elsőbbség egész szám kell legyenolvasási hiba itt: %.250sbeállító fájl olvasási hiba: `%.255s'olvasási hiba a szabvány bemenetenújrarendezett csomag fájlátnevezés `%s' felülírásával járna
+  `%s' eltérő fájllal, ez nem engedélyezetta kért művelet rendszergazda jogokat igényelkerestem, de nem leltem csomagokat (*.deb fájlokat)több csomaginfó bejegyzés létezik, csak 1 lehetszolga lánc és %s fő lánc azonos`%.250s' forrás fájl nem sima fájla statoverride fájl üres sort tartalmaz/ leszedése%s alfolyamat %d hibakóddal kilépetta cél egy könyvtár - nem mellőzhető a control fájl ellenőrzése%d. résznek több változata van - legalább `%.250s' és `%.250s'nincs új szkript a csomag új változatában - feladom`%.250s' rész fájl nem nyitható meg (újra)nem ellenőrizhető `%.250s' létenem ellenőrizhető az alábbi archívum léte: `%.250s'`%.250s' frissített állapotának lezárása sikertelen`%.255s' nem hozható létrenem tudom törölni `%.250s' kontroll info fájltsikertelen e felhasznált raktár fájl törlése: `%.250s'nem tudom eldobni `%.250s'-t%.250s kitöltése behúzással sikertelen%.250s feltöltése a behúzás után sikertelen`%.250s' frissített állapotának feltöltése sikertelenforrás fájl fstat sikertelen`%.250s' frissített állapotának fsync-je sikertelennem sikerült telepíteni `%.250s'-t `%.250s'-kéntnem tudom telepíteni az (állítólagos) új `%.250s' info fájltnem tudom telepíteni az új `%.250s' info fájlt, mint `%.250s'nem tudom telepíteni `%.255s' új verzióját`%.250s' frissített állapotának telepítése sikertelennem tudom elkészíteni `%.255s' mentő láncát az új változat telepítése előttnem tudom elmozdítani `%.255s'-t az új változat telepítéséhezsikertelen az új raktár fájl megnyitása: `%.250s'`%.250s' kimenő fájl nem nyitható mege forrásfájl nem megnyitható: `%.250s'nem tudom megnyitni az átmeneti ellenőrző könyvtárat`%.250s' raktár könyvtár nem olvasható%.250s fájl-leíró kapcsolói olvasása sikerelenmeghiúsult e lánc olvasása: `%.255s'`%.250s' rész fájl nem olvashatónem tudom eltávolítani `%.250s' újonnan-kicsomagolt verziójátnem tudom eltávolítani `%.250s' újonnan-telepített verziójátnem lehet törölni `%.250s' újonnan telepített verzióját a biztonsági másolat újratelepítéséheznem tudom eltávolítani az elavult `%.250s' info fájltnem sikerült átnevezni e raktár fájlt: `%.250s' erre: `%.250s'`%.250s' rész fájl újranyitása sikertelennem lehet visszaállítani "%.250s" mentett változatátnem tudok %.250s elejére menni a behúzás után`%.250s' futtatási jogainak beállítása sikertelennem lelem %s `%.250s'-tnem lelem `%.250s'-tnem érhető el a jelenleg telepített beállítófájl: %.250snem találom a másik `%.250s' új fájlt`%.250s' frissített állapotának vágása sikertelen`%.250s' frissített állapotának írása sikertelenváratlan adatok a csomag és választás után a %d. sorbanváratlan sorvég a csomagnév után a %d. sorbanváratlan sorvég a csomagnévben a %d. sorbanismeretlen %s argumentumismeretlen tömörítés: `%s'!ismeretlen `%.*s' kényszerítő/elutasító opcióismeretlen lehetőség -%cismeretlen lehetőség -- %sismeretlen kért állapot a %d. sorban: %.250skicsomagolt de nincs beállítvaAz updates könyvtárban lévő `%.250s' fájl neve túl hosszú (hossz=%d, max=%d)Az updates könyvtár eltérő hosszú fájlneveket tartalmaz (%d és %d is)a felhasználó által megnevezett `%.*s' mező túl rövida verziószámban szóközök vannaka verzió helye üresfigyelj!a csomagok sima nevét kell megadnod, nem az őket tartalmazó fájlokét
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/id.gmo dpkg-1.20.7.1/po/id.gmo
--- dpkg-1.20.7.1-orig/po/id.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/id.gmo	2021-06-09 18:25:14.936503400 -0500
@@ -0,0 +1,400 @@
+��L|�$(1?)1ai1=�1&	202-D3.r3�3.�3�3 �344S45o4-�4.�405135$e54�5/�5�5(6$06U6u6:�66�617197!k7(�7�7�7�7�7S8[8z8)�89�8.�8'%9&M9t93�95�9�9�9[:Uc:�:�:�:�:;;!;0;E;V;=e;R�;1�;'(<&P<(w<'�<+�<4�<!)=,K=9x=-�=�=#�=">$A>f>"�>�>!�>#�>2
+?1=?o?.�?�?-�?H�?QG@A�@e�@fAA7�A<�ABB0BsB�B
�B �B�B5�B1#CUCgC#�C!�C�C�CKD5LD-�D!�D�D-�D E5;EqE,�E.�E.�EFH4F6}F(�F>�F$G AGbGiGuG��G6H#CH-gH�H�H�H�H<�H�I�I[�IgJ
�K�L<�M.�MN0,N3]N1�N�N�N��N*�O2�O��OV�Q-�Q/R
IR]WR�R!�R�RG�R8:S,sS�S(�S�S�S�S:TVCT �T�T-�T	�TUU0UMU�TU�%V��V��W��X�LYu�Y&nZ{�Z[�0[ �[5�[,\$8\,]\�\u�\�]�]�]�]4^4;^p^�^6�^!�^	�^._,0_]_|_%�_�_%�_!`")`&L`s`�`;�`3�`a2aAMa�a&�a"�a�aEb,Tb"�b!�b5�b �bc-<c5jc,�cG�c$d:d7Sd�d*�d"�d�de)e?e"[e~e�e=�e*�eJfOf"af�f�f-�f)�f%g9g?g^gdgxg)�g�g�g!�g!h9h%Vh%|h'�h,�h�h*i?i!Tivi �i-�i#�i+j%2j$Xj}j �j�j�j:�jk8kTkqk$�k�k�k�k�k#l8lPl!pl:�l�l5�l "m2Cm%vm�m0�m*�m/n6HnVn<�n.o(Bo+ko)�o4�o4�o;+p<gp:�p7�p0q;Hq?�q$�qA�q$+r!Prrrc�r�r:s<Ms=�s�s�s$�s\t&lt&�t'�t �t'u4+u)`u�u	�uk�u/v$Gv#lv&�v!�v"�v^�v@[w�w%�w+�w7�w!5xWxqx�x�x�x�xO�x83y*ly�y�y�y�y7�y5zAz0az!�z�z�z5�z"{4@{
u{ �{%�{G�{P|Gc|?�|#�|7}+G}2s}Y�}f~&g~4�~F�~1
+;<x�.�.� �0�D=�����&��-Ӏ7�9�A�.G�v������Á)ځ�&!�H�a�Bs�H��&��0&�6W�4��
+Ã
+΃ك
+��%�%*�*P�{���+��+Ä!�$�46�Fk�@��,�R �'s�	��Z��4�25�h�D��GɇY�Qk�%��+�2�%B�%h�1��+��N�;�3U�*����5Ί$�2)�+\�+��,�����"�$9�^�*x���*��0�&�3B�4v�5��)�,�D8�*}�4��ݎ��&�#5�#Y�%}�(��.̏9��'5�*]�.����!Ԑ(��4�4T�[��,�4�#G�,k�"��"��/ޒ/�+>�+j�-��*ē&��1�P� h�2��0��&�B�#W�.{���Ǖ1���3,�`�*����Ŗ6ܖ&�.:�4i�1��+З���"1�T�h�{�(����SԘM(�(v�"��ڙ���`�`v��ךCb�f��8
�.F�u�2��(���*��(� D�-e���;��-�<�5S�0��)��:�2�R�(n�!����ס7�5*�1`�)��"��.ߢ�&�E�U�"e�%����9ǣ:�,<�5i�,��̤2ޤ7�I�O�,a�,����Х���
+��2�E�^�q�W��rۦ<N�-��,��.�-�/C�2s���5ƨ>��2;�)n�/��)ȩ*�(�.F�(u�,��.˪>��?9�y�2��ū,�Q�Ud�N��_	�ji�9ԭ:�I�8h���$��
����61�3h�����)ǯ%�"�:�RT�5��-ݰ�+�0J�${�9��ڱ0�-$�(R� {�A��7޲.�EE�(��'��ܳ
+������"��-ܴ
+�!�<�O�<^����&�UF����,�J�?^�+��ʺ*ߺ0
+�5;�q�
+�����T�7t����/Y�)��B����q���1����ZԿA/�*q���7������	�7�0I�!z���6��	�����&,�S��Z��;�����������l�3)�&]����!��6�'��?��:(�+c�5����z���F�
+.�
+9�D�7S�7����"��<�.@�o�-~�2��!��0�62�"i�.��0��'��0�E�d�H��:��!�!(�JJ�!��1��5���F8�0�*��%��0�2�K�&i�B��4��S�*\���E����8�*?�j�������+����	�S"�%v�H��
�����'�/C�3s�"����"�����!&�1H�&z�+��-��/��(+�1T�6��2��,��-�,K�!x�'��-��(��3�0M�<~�.��*��!�,7�d���I����'�-�"J�'m�����!��!��*�"/�'R�4z�:��!��5�#B�3f�'����.��+�-:�Ah�f��>�1P�,��-��*��9�;B�D~�B��?�=F�1��=��F��+;�Kg�(��$��$�b&���?��C��F+�
r���)��2��'��0�1I�({�*��8��+�4�	F�lP�5��$��#�)<�%f�&��b��N�e�&v�$��7��.��)�D� ^������\��>.�1m�����
+����I��A(�j�<��.����%
�;3�(o�E����,��4�PM�W��Y��LP�-��C��0�-@�\n�b��,.�4[�Q��.��H�$Z��3��2��%�
+)�94�n���/��0��8��	+�5�;<�	x�����!����1��-!�-O�}���R��K��'K�5s�\��>�
E�S�%_���/��)��2���%�79�5q�)����N��D@�4��;��R��#I�m�Yt�8��<�!D�Af�F��V��QF�%��0��1��#!�/E�)u�@��J��+�3E�*y���0��!��/�.>�+m�;������#
+�).�X�/w�!��6��6(76`;�5�'	+1F]3�9�)/C&s$�+�(�*<?(|+�2�$ 1E3w5�^�6@Bw*�6�((E9n,�8�/)>)h,��#�' 7HB�0�9�*.	0Y	�	�	1�	�	7
+L
+*g
+�
+�
+?�
+2(A8j6�3�"''Jr��8�!�^
Vv
2�
2
+NYcmr��RK ���N�$��j�"u!���
+������\*���Q7*����=TJX/�O��ZfGC��;��k���o-��vh���E����[������$��5��m�p��K�	q�������"6�eZr������\(?�Y"@3���J;Bc�ts=BC��'�Hn]q>o.�+vO��w:�V�4UB/ ��g�K�28&)?W�H�j<����6�_�I#��:�%fY�S��5/�%
@��2,�~�T<|�%X������r}�1��3���!�W�2�MD*��x���`&G�}|�.'9�',D
+�
i�(�����L����������4S9��F��<I-��{A7~JRE��>9n5�a����D��E	{�����H�N�bb��Ua8�0����6�]���#�7�l8���;��G(AhA ���)p!Ld����0.w���Iz1����Ms
���:C��)���������_�uQ`+k�F�#����	y��@�������[>z��Ve���0�^$1cF&m�?
+��i�d^�3�l�y4P,���P��-�L=+�x�g�t��
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s depends on %s%s enhances %s%s pre-depends on %s%s recommends %s%s suggests %s%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s requires one or more part file arguments--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Alternative %s unchanged because choice %s is not available.Another process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+Authenticating %s ...
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Errors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Information about %d package was updated.
+Information about %d packages was updated.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+Leaving '%s'
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Nothing to configure.Package %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPriorityProcessing was halted because there were too many errors.
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Removing '%s'
+Replacing available packages info, using %s.
+SelectionSetting up %s (%s) ...
+Skip invalid line: %sSkip unknown alternative %s.StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use --help for help about querying packages.VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+[default=N][default=Y][no default]alternative link is not absolute as it should be: %salternative path is not absolute as it should be: %sany diversion of %sany diversion of %s to %sarchive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerauto modeawaiting trigger processing by another packagebroken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot divert file '%s' to itselfcannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')cannot stat file '%s'character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file contains %ccould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdiversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+dpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is not numbererrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror opening conffiles fileerror opening configuration directory '%s'error reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to '%s'error writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind trigger interest file '%.250s'failed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'fgets gave an empty string from '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefork failedformat version numbergenerated corrupt ar header for '%s'ignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!illegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal pending trigger name '%.255s': %sinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemanual modemaster filemaster linkmay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'multiple Conflicts and Replacesmultiple statoverrides present for file '%.250s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s contained list as info filepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage diverts others to: %s
+package file MD5 checksumpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepre-dependency problem - not installing %.250sprioritypriority must be an integerpriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package fileremoval of %.250sremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filestatoverride file contains empty linestatoverride file is missing final newlinestatusstripping trailing /subprocess %s returned error exit status %dsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving uptoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers looping, abandonedtrying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove backup copy of '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync file '%.255s'unable to sync file '%s'unable to truncate for updated status of '%.250s'unable to write file '%s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file while trying to read %sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?you must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.15
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-06-26 16:12+0200
+Last-Translator: Arief S Fitrianto <arief@gurame.fisika.ui.ac.id>
+Language-Team: Indonesian <debian-l10n-indonesian@lists.debian.org>
+Language: id
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=1; plural=0;
+
+  pemicu-pemicu paket yang tertunda yang mungkin tak terpecahkan:
+
+Berkas konfigurasi '%s' tidak ada pada sistem. 
+Memasang berkas konfigurasi baru sesuai permintaan. 
+     Versi dalam paket sama dengan pemasangan terakhir.
+     bukan sebuah berkas biasa         %.255s
+   Apa yang ingin Anda lakukan? Pilihan Anda adalah:
+   Y atau I : pasang paket versi pengelola paket
+   N atau O : pertahankan versi yang terpasang
+       D    : tunjukkan perbedaan antara keduanya
+       Z    : jadikan proses ini sebagai 'proses latar' untuk melihat keadaan
+  %.250s (versi %.250s) sudah ada dan adalah %s. 
+   %.250s (versi %.250s) akan dipasang.
+  %.250s adalah %s. 
+  %.250s terpasang, tetapi versi %.250s. 
+  %.250s tidak terpasang. 
+   %.250s akan didekonfigurasi.
+   %.250s akan dipasang, tetapi versi %.250s
+   %.250s akan dibuang.
+   %.250s telah dibuka, tetapi belum pernah dikonfigurasi.
+   %.250s telah dibuka, tetapi versi %.250s.
+   %.250s versi terakhir yang terkonfigurasi adalah %.250s.
+  %.250s menyediakan %.250s dan %s serta sudah ada. 
+   %.250s menyediakan %.250s dan akan dipasang.
+  %.250s menyediakan %.250s, tetapi %s. 
+   %.250s menyediakan %.250s tetapi akan didekonfigurasi.
+   %.250s menyediakan %.250s tetapi akan dibuang.
+  %s (%s) menyediakan %s. 
+   Paket %s menunggu pemrosesan pemicu.
+  Paket %s belum dikonfigurasi. 
+  Paket %s tidak terpasang. 
+   Paket %s akan dibuang.
+   Paket %s menyediakan %s menunggu pemrosesan pemicu.
+   Paket %s yang menyediakan %s belum dikonfigurasi.
+  Paket %s yang menyediakan %s tidak terpasang. 
+   Paket %s menyediakan %s akan dibuang.
+  Versi %s pada sistem adalah %s.
+  Versi %s yang akan dikonfigurasi adalah %s.
+   nara saat ini lenyap   nara saat ini mengacu ke %s  tiruan %s: %s  %d dalam %s:  %d paket, dari seksi berikut ini:  %s (%s) merusak %s dan adalah %s. 
+%s (bukan berkas biasa)
+ ==> Pertahankan berkas konfigurasi lama sebagai bawaan.
+ ==> Distributor paket telah membawa suatu versi terbaru.
+ ==> Gunakan berkas lama sesuai permintaan.
+ ==> Gunakan berkas konfigurasi baru sebagai bawaan.
+ ==> Gunakan berkas baru sesuai permintaan.
+Paket %s: bagian  Tindakan bawaan adalah memasang versi yang baru.
+ Tindakan bawaan adalah mempertahankan versi yang ada.
+ dan  bergantung pada  %d berkas atau direktori telah terpasang.)
+%d komponen 'control' yang diperlukan hilang%s (subproses): %s 
+%s - prioritas %d%s mengacaukan %s %s bentrok dengan %s%s terkorupsi: %s%s bergantung pada %s%s meningkatkan %s%s pra-syarat awalnya %s%s menganjurkan %s%s menyarankan %s%s: berkas konfigurasi '%.250s' bukan sebuah berkas normal atau nara simbolik (= '%s') %s: berkas konfigurasi '%.250s' menghasilkan nama berkas yang terdegenerasi 
+ ('%s' adalah nara simbolik ke '%s') %s: berkas konfigurasi '%s' adalah nara sirkular 
+ (= '%s') %s: salah mengirimkan masukan ke stream bzip2%s: salah mengirimkan masukan ke stream gzip%s: salah mengirimkan keluaran ke stream bzip2%s: salah mengirimkan keluaran ke stream gzip%s: gagal membuat nara '%.250s' ke '%.250s: %s %s: gagal membuang '%.250s' (sebelum menimpa): %s %s: gagal membuang '%.250s': %s%s: gagal membuang berkas cadangan lama '%.250s': %s %s: gagal membuang versi terdistribusi '%.250s' yang lama: %s %s: gagal mengganti nama '%.250s' ke '%.250s': %s %s: ada galat internal saat membaca bzip2%s: ada galat internal saat membaca bzip2: '%s'%s: ada galat internal saat menulis bzip2%s: ada galat internal menulis bzip2: '%s'%s: ada galat internal saat membaca gzip%s: ada galat internal saat membaca gzip: '%s'%s: ada galat internal saat menulis gzip%s: ada galat internal saat menulis gzip: %s%s: ada galat internal saat menulis gzip: '%s'%s: gagal membaca-baris berkas konfigurasi '%s'
+  (= '%s'): %s%s: gagal menata status berkas konfigurasi '%s' 
+ (= '%s'): %s '%s' bentrok dengan '%s''%s' berisi nilai Prioritas definisi pengguna '%s'pilihan '%s' tidak ada nilainyaruas '%s', nama paket '%.255s': %s tidak sahruas '%s', di tempat yang seharusnya ada nama paket, nama paket hilang atau salahruas '%s', yang mengacu ke '%.255s':
+'%c' sudah usang, gunakan saja '%c=' atau '%c%c'ruas '%s', yang mengacu ke '%.255s': 
+memiliki hubungan versi %c%c yang buruk.ruas '%s', yang mengacu ke '%.255s':
+nomor versi cocok secara tersirat, saran: gunakan saja '='ruas '%s', yang mengacu ke '%.255s':
+nilai versi dimulai tanpa alphanumerik, saran: tambahkan sebuah spasiruas '%s', yang mengacu ke '%.255s': versi tidak diakhiriruas '%s', salah syntaks setelah mengacu ke paket '%.255s'pilihan '%s' butuh suatu nilai(Mencatat lenyapnya %s, yang telah diganti seutuhnya.) 
+(Sedang membaca basis data ... (tidak ada keterangan yang tersedia), core dibuatpilihan -%c tidak ada nilainyapilihan -%c butuh suatu nilai--%s --pending tidak butuh suatu argumen bukan-pilihan--%s --recursive perlu sedikitnya satu argumen path--%s butuh <nama>--%s butuh <nama> <path>--%s butuh suatu argumen nama berkas .deb--%s butuh sebuah argumen <direktori>--%s butuh sebuah argumen <berkas>--%s butuh sebuah argumen--%s butuh suatu direktori target.
+Mungkin Anda harus menggunakan dpkg --install ?--%s butuh sedikitnya satu argumen berkas arsip paket--%s butuh sedikitnya satu argumen nama paketpilihan --%s tidak ada nilainyapilihan --%s butuh suatu nilai--%s butuh satu atau lebih argumen berkas bagian--%s butuh paling banyak dua argumen--%s butuh paling banyak dua argumen (.deb dan direktori)--%s tidak butuh argumen--%s hanya butuh satu argumen (nama berkas .deb)--auto butuh tepat satu argumen berkas bagian--auto butuh penggunaan pilihan --outputhubungan buruk --compare-version--compare-versions butuh tiga argumen: <versi> <hubungan> <versi>--search butuh setidaknya satu argumen pola nama berkas--split butuh suatu argumen nama berkas sumber--split butuh paling banyak satu nama berkas sumber dan awalan tujuan--update disertakan, tetapi %s tidak ada--update tidak berguna bersama --remove.../%s; tetapi:
+<compress> dari tar -cf<deb> adalah nama berkas dengan format arsip Debian.
+<komp> adalah nama komponen berkas administratif.
+<isian> adalah nama ruas isian dalam berkas 'control' utama.
+
+<dekompresi><nara> dan <path> tidak boleh sama<deskriptor status paket dan berkas kemajuan><galat standar>ada galat baca di masukan standar<keluaran standar>Menambah '%s'
+Alternatif %s tidak diubah karena pilihan %s tidak tersedia.Proses lainnya telah mengunci penulisan basis-data dan mungkin sedang
+menyuntingnya. Beberapa masalah berikut mungkin disebabkan hal ini.
+Melakukan otentikasi (%s) ... 
+Perintah:
+   --check-supported                Pastikan bahwa dpkg mendukung pemicu.
+
+Perintah:
+   -s|--split <berkas> [<awalan>]   Belah sebuah arsip.
+   -j|--join <bagian> <bagian> ...  Gabung bagian jadi satu.
+   -I|--info <bagian>               Lihat info suatu bagian.
+   -a|--auto -o <lengkap> <bagian>  Kumpulkan bagian secara otomatis.
+   -l|--listq                       Lihat potongan yang tidak cocok.
+   -d|--discard [<namaberkas> ...]  Abaikan potongan yang tidak cocok.
+
+Perintah:
+  [--add] <berkas>         menambah pengalih.
+  --remove <berkas>        menghapus pengalih.
+  --list [<pola-global>]   lihat berkas pengalih.
+  --listpackage <berkas>   lihat paket yang jadi pengalih berkas ini.
+  --truename <berkas>      kembalikan berkas yang dialihkan.
+
+Operator perbandingan untuk --compare-versions sbb:
+ lt le eq ne ge gt       (perlakukan versi kosong selalu lebih awal);
+ lt-nl le-nl ge-nl gt-nl (perlakukan versi kosong selalu lebih baru);
+ < << <= = >= >> >       (hanya untuk kompatibilitas dgn sintaks berkas control).
+
+Perkakas pencarian program pengelola paket Debian %s versi %s.
+ Perkakas pemicu paket Debian %s versi %s.
+Debian %s versi %s.
+'Backend' arsip paket Debian %s versi %s.
+Program pengelolaan paket Debian '%s' versi %s.
+Perkakas pemisah/pemadu paket Debian '%s'; versi %s.
+%s telah dihapus.
+KeteranganHarapan=tak-diKenal/Pasang/Buang/Musnahkan/Cekal
+| Status=tDk/Psng/brks-Konfg/diBuka/konfg-Gagal/Stgah-psng/tngu-pmicU/tunda-pmiCu
+|/ Galat?=(tiada)/Hrs-psg-lagi (Status,Galat: huruf-besar=buruk)
+Ada kesalahan saat memproses: 
+Berkas '%.250s' bukan bagian dari arsip banyak-bagian.
+Sintaks format:
+  Sebuah format adalah string yang menjadi keluaran setian paket. Format
+  dapat berisi rangkaian escape standar \n  (baris-baru), \r (carriage
+  return) atau \\ (garing-balik biasa). Informasi paket dapat disertakan
+  dengan memasukkan variabel yang mengacu pada ruas paket dengan
+  sintaks ${var:[;width]}. Semua isian akan dirata-kanankan kecuali lebar
+  ruas isian negatif, yang berarti akan dirata-kirikan.
+Informasi tentang %d paket telah diperbaharui.
+Memasang berkas konfigurasi baru %s ... 
+Berkas-berkas sampah yang tertinggal di dalam direktori 'depot': 
+Tinggalkan '%s' apa adanya
+Lebih dari satu salinan paket %s yang telah dibuka
+ dalam pemasangan ini! Hanya akan mengonfigurasi sekali saja.
+NamaTidak ada pengalihan '%s', tak ada yang dibuang.
+Tiada yang dikonfigurasiPaket %s sedang dicekal, tidak akan disentuh. 
+Gunakan '--force-hold' untuk memprosesnya.
+Paket %s terdaftar lebih dari sekali, hanya memprosesnya sekali.
+Paket '%s' tidak berisi suatu berkas pun!
+Paket belum disusun ulang: 
+Bagian %d dari paket %s telah diberkaskan (masih ingin PathRuas Pre-DependsPrioritasPemrosesan dihentikan karena terlalu banyak kesalahan.
+Menggabungkan paket %s jadi satu dari %d bagian:Merekam info tentang %s dari %s.
+Sedang membuang '%s' 
+Sedang mengganti info paket yang tersedia, dengan %s.
+PemilihanSedang menata %s (%s) ... 
+Hindari baris tidak sah: %sLewati alternatif %s yang tak dikenal.StatusPaket-paket berikut ini menunggu pemrosesan pemicu-pemicu yang
+telah diaktifkan di paket-paket lainnya. Pemrosesan ini dapat diajukan
+dengan perintah dselect atau 'dpkg --configure --pending' (atau 
+'dpkg --triggers-only'):
+Paket-paket berikut ini kacau-balau karena masalah serius 
+selama pemasangan. Semuanya harus dipasang ulang (serta semua 
+paket yang berhubungan) agar dapat berfungsi normal:
+Paket-paket berikut ini hanya setengah terkonfigurasi, mungkin karena 
+masalah konfigurasi pertama kali. Konfigurasi harus diulangi dengan 
+'dpkg --configure <paket>' atau pilihan menu konfigurasi pada dselect:
+Paket-paket berikut ini hanya setengah terpasang karena masalah selama 
+pemasangan. Pemasangan mungkin dapat disempurnakan dengan mengulanginya;
+paket-paket tersebut dapat dibuang dengan dselect atau 'dpkg --remove':
+Paket-paket berikut ini telah diaktifkan pemicunya, tetapi pemrosesan
+belum dilakukan. Pemrosesan pemicu dapat diajukan dengan
+perintah dselect atau 'dpkg --configure --pending' (atau 
+'dpkg --triggers-only'):
+Paket-paket berikut ini telah dibuka, tetapi belum dikonfigurasi. 
+Semuanya harus dikonfigurasi dengan 'dpkg --configure' 
+atau pilihan menu konfigurasi pada dselect agar dapat berfungsi:
+Ada %d pilihan untuk alternatif %s (seluruhnya %s).tidak ada program yang menyediakan %s.Ini adalah perangkat lunak bebas; lihat GNU General Public Licence versi 2
+atau selanjutnya untuk persyaratan penggandaan. TIDAK ADA jaminan. 
+Ketik 'exit' bila telah selesai.
+Ketik dpkg-deb --help untuk panduan dalam manipulasi berkas *.deb;
+Ketik dpkg --help untuk panduan dalam pemasangan dan pembuangan paket.Ketik 'dpkg-split --help' untuk panduanKetik 'dpkg-trigger --help' untuk panduan tentang perkakas ini.Sedang memperbaharui info paket yang tersedia, dengan %s.
+Penggunaan: %s [<pilihan> ...] <perintah>
+
+Gunakan --help untuk panduan tentang pencarian paket.VersiVersi dpkg dengan dukungan %s bagus belum dikonfigurasi.
+  Mohon gunakan 'dpkg --configure dpkg', lalu silakan coba lagi.
+Ketika menambah, bakunya adalah --local dan --divert <original>.distrib.
+Ketika menghapus, --package atau --local dan --divert harus cocok jika digunakan.
+Script preinst/postrm paket harus selalu menentukan --package dan --divert.
+[bawaan=T][bawaan=Y][tiada bawaan]nara alternatif tidak mutlak sebagaimana seharusnya: %spath alternatif tidak mutlak sebagaimana seharusnya: %spengalihan sembarang dari %spengalihan sembarang dari %s ke %sarsip berisi obyek '%.255s' dari jenis 0x%x yang tak dikenalarsip tidak mengandung baris-baru di headernyamodus otomatismenunggu pemrosesan pemicu oleh paket lainnyarusak karena kegagalan saat membuang atau memasangrusak karena kegagalan 'postinst'tidak dapat memasang pilihan %s yang tak dikenalgagal melakukan 'mmap' pada berkas info paket '%.255s'gagal membuang skrip 'postrm' lamagagal menata status berkas info paket '%.255s'gagal mengalihkan berkas '%s' ke dirinya sendirigagal membuka '%.255s' (dalam '%.255s')tidak dapat membuka berkas bagian arsip '%.250s'gagal membaca direktori 'info'tidak dapat membuang '%.250s'gagal membuang berkas konfigurasi cadangan lama '%.250s' (dari '%.250s')gagal membuang berkas konfigurasi lama '%.250s'(='%.250s')gagal membuang daftar berkas lamagagal mengganti nama '%s' ke '%s'tidak dapat memenuhi pra-syarat awal untuk %.250s (dibutuhkan oleh %.250s)gagal memindai direktori '%.255s'tidak dapat memindai direktori 'updates' '%.255s'gagal melakukan 'stat' pada '%.255s' (dalam '%.255s')gagal menata status '%s'aksara '%c' tidak diizinkan (hanya huruf, digit, dan aksara '%s' saja)berkas 'conffile' '%.250s' tidak ada dalam paketberkas konfig '%.250s' tidak dapat diaksesberkas konfig '%s' bukan berkas biasanama berkas konfig '%s' berakhiran spasi kosong berkas konfig '%s' gandagalat konfigurasi: %s: %d: %saksi -%c (--%s) dan -%c (--%s) bentrokberkas 'diversions' yang bentrok melibatkan '%.250s' atau '%.250s'paket-paket berbenturan - tidak akan memasang %.250sdirektori 'control' memiliki izin yang buruk: %03lo (seharusnya >= 0755 dan <=0755)direktori 'control' bukan sebuah direktoriberkas control berisi %cgagal menata status berkas '%.250s' yang lama, jadi tidak dibuang: %sgagal membuka '%i' untuk streamada masalah ketergantungan - biarkan tidak dikonfigurasiada masalah ketergantungan - tidak dibuangDialihkan oleh %s dari: %s
+Dialihkan oleh %s ke: %s
+pengalihan %s oleh %spengalihan %s ke %s oleh %snama-pengalih tidak boleh berisi baris-baruDialihkan oleh %s ke: %s
+selesai.
+dpkg tercatat sebagai tidak terpasang, 
+   gagal memeriksa dukungan terhadap '%s'!
+paket pemicu tertunggu '%.250s' gandaberkas tujuan pemicu ganda untuk nama berkas '%.250s' dan paket '%.250s'path %s gandapemicu tertunda '%.255s' gandanara tiruan %s gandanilai ganda untuk ruas '%s'nilai ganda untuk ruas definisi pengguna '%.*s'string kosong dari fgets yang membaca berkas konfignama pemicu kosong tidak diizinkanepochepoch pada versi bukan suatu angkagalat proses 'parse'Ada galat saat memeriksa '%s'Ada kesalahan saat menutup %.250sada kesalahan menutup berkas konfigurasi '%.255s'Ada kesalahan menutup/menulis '%.255s'Ada kesalahan saat membuat piranti '%.255s'Ada kesalahan saat membuat direktori '%.255s'ada kesalahan saat membuat 'hard link' '%.255s'Ada kesalahan saat membuat pipe '%.255s'ada kesalahan saat membuat nara simbolik '%.255s'ada kesalahan saat memastikan bahwa '%.250s' tidak adaada galat saat menjalankan '%s', kode keluaran: %dsalah menata string ke dalam variabel varbufada kesalahan saat membuka berkas 'conffiles'ada galat membuka direktori konfigurasi '%s'ada kesalahan saat membaca %.250sada galat membaca %s dari berkas %.255sada kesalahan saat membaca berkas 'conffiles'ada kesalahan saat membaca pipe dpkg-debada galat saat membaca berkas tunda pemicu '%.250s'Ada kesalahan penataan kepemilikan pada '%.255s'ada kesalahan saat menata kepemilikan nara simbolik '%.255s'Ada kesalahan penataan perizinan pada '%.255s'Ada kesalahan penataan waktu pada '%.255s'Ada kesalahan saat membuka %.250sAda kesalahan saat melepaskan sinyal %s: %s
+Ada galat saat menulis '%s'Ada galat saat menulis ke '%s'ada kesalahan saat menulis ke stderr, ditemukan sebelum prompt 'conffile'gagal mengalokasikan memoriGagal memindahkan direktori ke '%.255s'gagal berpindah ke direktorigagal memindahkan root ke '%.250s'gagal menutup setelah membaca: '%.255s'gagal membuat direktorigagal membuat pipegagal melakukan 'dup' untuk fd %dgagal melakukan 'dup' untuk std%sgagal menata status berkas anggota ar (%s)Gagal melakukan 'fstat' pada arsipGagal menata status berkas 'diversions'Gagal menjalankan 'fstat' pada berkas 'statoverride'gagal membuka berkas konfigurasi '%.255s' untuk dibaca: %sgagal membuka berkas 'diversions'gagal membuka berkas info paket '%.255s' untuk dibacagagal membuka berkas 'statoverride'gagal membuka berkas daftar tujuan pemicu '%.250s' gagal membaca '%.255s' (dalam '%.255s')gagal membaca arsip '%.255s'gagal membuang berkas 'update' gabungan %.255sgagal membuang berkas 'update' saya: %.250sgagal mengulang berkas tujuan pemicu '%.250s'gagal menata status (dereferensi) nara simbolik '%.250s' yang adagagal menata status (dereferensi) target symlink '%.250s' yang ditawarkan untuk nara simbolik '%.250s'gagal menulis rekaman basisdata %s tentang '%.50s' ke '%.250s'gagal menulis rincian tentang '%.50s' ke '%.250s'fgets memberikan string kosong dari '%.250s'nama ruas '%.*s' harus diikuti oleh titik-duaberkas '%.250s' terkorupsi - %.250s hilangberkas '%.250s' terkorupsi - checksum MD5 buruk: '%.250s'berkas '%.250s' terkorupsi - digit buruk (kode %d) dalam %sberkas '%.250s' terkorupsi - 'magic' buruk pada akhir header pertamaberkas '%.250s' terkorupsi - 'magic' buruk pada akhir header keduaberkas '%.250s' terkorupsi - karekter 'padding' buruk (kode %d)berkas '%.250s' terkorupsi - baris-baru hilang setelah %.250sberkas '%.250s' terkorupsi - bagian 'info' kosongberkas '%.250s' terkorupsi - anggota kedua bukan anggota databerkas '%.250s' terkorupsi - salah ukuran untuk nomor bagian termaktubberkas '%.250s' terkorupsi - terlalu pendekberkas '%.250s' terkorupsi - salah nomor bagian untuk ukuran yang termaktubberkas '%.250s' bukan suatu bagian arsipberkas '%s' bukan bagian dari arsip
+berkas tidak boleh berisi baris-barurekam berkas pemicu berisi nama paket tidak sah '%s.250s' (untuk tujuan di berkas '%.250s): %.250snama berkas "%s" tidak mutlakberkas '%.250s' dan '%.250s' bukan bagian dari berkas yang samaberkas daftar berkas untuk paket '%.250s' berisi nama berkas kosongberkas daftar berkas untuk paket '%.250s' tidak ada baris-baru penutup'fork' gagal nomor versi formatmembuat header 'ar' terkorupsi untuk '%s'mengabaikan %d peringatan tentang berkas 'control'abaikan kekacauan, proses dilanjutkan! abaikan paket yang bentrok, proses dilanjutkan! mengabaikan masalah ketergantungan dengan %s: 
+%smengabaikan masalah pra-ketergantungan! nama paket tidak sah pada baris %d: %.250snama paket dalam pemicu tertunggu '%.255s': %s tidak sahnama pemicu tertunda '%.255s': %s tidak sahpemasangan %.255sterpasangmemasang %.250s akan merusak %.250s, dan
+dekonfigurasi tidak diizinkan (--auto-deconfigure mungkin membantu)memasang %.250s akan merusak perangkat lunak yang adanomor revisi berisi aksara tidak sahnomor versi berisi aksara tidak sahtingkat kompresi untuk -%c tidak sah: %ldinteger untuk -%c tidak sah: '%.250s'integer untuk --%s tidak sah: '%.250s'sintaks tidak sah atau tak dikenal di nama pemicu '%.250s' (di tujuan pemicu untuk paket '%.250s')name paket tidak sah '%.250s' di pemicu menghalangi pemrosesan berkas '%.250s'status tidak sahnama pemicu '%.250s' tidak sah: %.250sbaris tidak diakhiri saat membaca %sbaris terlalu panjang atau tak diakhiri saat membaca %snara %s adalah nara utama dan tiruan sekaligusPengalihan lokal dari: %s
+%s dialihkan secara lokalpengalihan %s secara lokal ke %sdialihkan secara lokal ke: %s
+dialihkan secara lokal ke: %s
+nama-berkas panjangskrip pengelola paket '%.50s' memiliki izin yang buruk: %03lo (seharusnya >=0555 dan <=0755)skrip pengelola paket '%.250s' bukan berkas biasa atau symlinkskrip pengelola paket '%.50s' tidak dapat diaksesmodus manualberkas utamanara utamatidak boleh string kosongditemukan ketidakcocokan
+  saat menghapus '%s'
+  dalam nama-pengalih '%s'ditemukan ketidakcocokan
+  saat menghapus '%s'
+  dalam paket '%s'banyak Conflicts dan Replacesbanyak berkas 'statoverride' terdaftar untuk berkas '%.250s'nama %s adalah nama utama dan tiruan sekaligusbutuh suatu pilihan aksiada baris-baru dalam nama ruas '%.*s'baris-baru dilarang dalam berkas 'update-alternatives' (%s)tidak ada informasi paket dalam '%.255s'tidak ada paket bernama '%s' yang dipasang; tidak dapat dikonfigurasitak dipasangtidak terpasang tetapi konfigurasi masih adatidak ada apa-apa setelah titik-dua pada nomor versiberkas konfig '%.250s' lama berupa direktori kosong (dan sekarang sudah dihapus)berkas '%.250s' lama sama dengan beberapa berkas baru! (keduanya '%.250s' dan '%.250s')versi lama paket ini memiliki nama berkas 'info' yang terlalu panjang mulai dari '%.250s'gagal membuka komponen '%.255s' (dalam %.255s) dengan hasil yang tak terdugakehabisan memory untuk masukan 'cleanup' barukehabisan memory untuk masukan 'cleanup' baru dengan banyak argumenada masalah penimpaan karena --force dihidupkan:paket %.250s telah dipasang dan dikonfigurasipaket %.250s belum siap dikonfigurasi
+  tidak dapat dikonfigurasi (status sekarang '%.250s')paket %.250s belum siap untuk pemrosesan pemicu
+  (status sekarang '%.250s' tanpa pemicu tertunda)paket %s berisi daftar sebagai berkas 'info'arsitektur paket (%s) tidak cocok dengan sistem (%s)paket berisi nama berkas info 'control' yang terlalu panjang (mulai dari '%.250s)info 'control' paket berisi direktori '%.250s'proses rmdir dari info 'control' paket '%.250s' mengatakan ini bukan dirpaket mengalihkan paket lain ke: %s
+pemeriksaan MD5 berkas paketpaket berstatus %s, tetapi ada pemicu yang ditunggupaket berstatus %s tetapi ada pemicu yang tertundaPaket mungkin tidak berisi baris-barunama paketnama paket berisi aksara yang bukan huruf kecil atau `-+'nomor versi paketbagian %d hilangberkas bagian '%.250s' bukan suatu berkas biasaukuran bagian terlampau besar atau tidak positifukuran bagian harus sekurangnya %d KiB (termasuk header)dilewati
+tempelAda masalah pra-ketergantungan - tidak akan memasang %.250sprioritasprioritas harus bilangan bulatprioritas dari %s: %sAda kesalahan saat membaca %.250sada galat di '%.250s'ada kesalahan membaca berkas konfigurasi '%.255s'ada kesalahan membaca masukan standar (stdin)ada kesalahan pada stdin di prompt 'conffile'menyusun ulang berkas paketpenghapusan %.250ssedang menghapus alternatif terpilih secara manual - memindah %s ke modus otomatisganti nama yang menimpa '%s' dengan
+  berkas '%s' berbeda, tidak diizinkan.rename: buang nara '%s' lama yang gandaoperasi yang diminta membutuhkan kewenangan superusertelah dicari, tetapi tidak menemukan suatu paket pun (berkas-berkas yang cocok dengan *.deb)ditemukan beberapa baris info paket; hanya satu yang diizinkanberkas tiruannara tiruannara tiruan sama dengan nama utama %snama tiruanberkas sumber '%.250s' bukan suatu berkas biasaberkas 'statoverride' berisi baris kosongberkas 'statoverride' tidak ada baris-baru penutupstatuslenyapkan / penutupsubproses %s menghasilkan kesalahan status keluaran: %dada galat sintaks dalam berkas pemicu berkas '%.250s'salah sintaks dalam berkas 'statoverride'butuh satu argumen, nama pemicutarget adalah direktori - tidak dapat menghindari pemeriksaan berkas 'control'ada beberapa versi dari bagian %d - setidaknya '%.250s' dan '%.250s'tidak ada skrip dalam paket versi terbaru - menyerahbaris terlalu panjang atau baris-baru hilang dalam '%.250s'ada kesalahan berkas tujuan pemicu '%.250s'; nama paket tidak sah '%.250s': %.250snama pemicu berisi aksara tidak sahdipicuberkas ci pemicu '%.250s' berisi sintaks pemicu tidak sah di nama pemicu '%.250s': %.250sberkas ci pemicu berisi konfigurasi tak dikenal '%.250s'berkas ci pemicu berisi sintaks konfigurasi yang tak dikenalpemicu berulang; dihentikan saja.mencoba menimpa '%.250s', yang juga ada dalam paket %.250s %.250smencoba menimpa '%.250s', yang merupakan versi '%.250s' yang dialihkanmencoba menimpa '%.250s', yang merupakan versi '%.250s' yang dialihkan (paket: %.100s)mencoba menimpa direktori '%.250s' dalam paket %.250s %.250s dengan non-direktoridua perintah diberikan: --%s dan --%sgagal membuka ulang berkas bagian input '%.250s'gagal mengubah kepemilikan berkas target '%.250s'gagal memeriksa keberadaan '%.250s'gagal memeriksa status pengunci berkas '%.250s'gagal memeriksa keberadaan arsip '%.250s'gagal mengubah kepemilikan nara simbolik cadangan untuk '%.255s'gagal membersihkan kekacauan sekitar '%.255s' sebelum memasang versi lain.gagal menutup berkas '%s'gagal meutup berkas tunda pemicu '%.250s' yang barugagal menutup status terbaru dari '%.250s'gagal membuat '%.255s'gagal membuat '%.255s' (saat memproses '%.255s')gagal membuat direktori sementaragagal membuat direktori status pemicu: '%.250s'gagal menghapus berkas info 'control' '%.250s'gagal menghapus direktori lama '%.250s': %sgagal menghapus berkas 'depot' '%.250s' yang telah terpakaigagal mengabaikan '%.250s'gagal menjalankan %s (%s)gagal mengisi %.250s dengan paddingGagal mengosongkan %.250s setelah paddinggagal mengosongkan berkas '%s'gagal mengosongkan status terbaru dari '%.250s'Gagal menata status berkas sumbergagal sinkronisasi berkas status terbaru dari '%.250s'gagal mengabaikan sinyal %s sebelum menjalankan %.250sgagal memasang '%.250s' sebagai '%.250s'gagal memasang berkas 'info' (tampaknya) baru '%.150s'gagal memasang berkas 'info' baru '%.250s' sebagai '%.250s'gagal memasang berkas tunda pemicu '%.255s' yang barugagal memasang versi baru dari '%.255s'gagal memasang status terbaru dari '%.250s'gagal membuat nara cadangan untuk '%.255s' sebelum memasang versi barugagal membuat nara simbolik cadangan untuk '%.255s'gagal memindahkan '%.255s' untuk memasang versi yang barugagal membuka '%.255s'gagal membuka berkas '%s'gagal membuka berkas 'depot' '%.250s' yang barugagal membuka berkas keluaran '%.250s'gagal membuka berkas sumber '%.250s'gagal membuka direktori 'control' sementaragagal membuka berkas ci pemicu: '%.250s'gagal membuka berkas tunda pemicu '%.250s'gagal membuka/membuat berkas tunda pemicu '%.250s' yang barugagal membaca direktori 'depot' '%.250s'gagal membaca berkas pemicu berkas '%.250s'gagal membaca tanda deskriptor berkas untuk %.250sgagal membaca link '%.255s'gagal membaca berkas bagian '%.250s'gagal membuang versi cadangan dari paket '%.250s'gagal membuang versi yang baru diurai dari '%.250s'gagal membuang versi yang baru diinstal dari '%.250s'gagal membuang versi terbaru dari paket '%.250s' agar dapat memasang ulang salinan cadangannyagagal membuang berkas 'info' '%.250s' yang sudah usanggagal mengganti nama berkas 'depot' '%.250s' yang baru ke '%.250s'gagal membuka ulang berkas bagian '%.250s'gagal mengembalikan versi cadangan dari paket '%.250s'gagal secara hati-hati membuang '%.250s'gagal secara hati-hati membuang '%.255s'gagal secara hati-hati menghapus berkas lama '%.250s': %sGagal mencoba memulai %.250s setelah paddinggagal menata penyangga (buffer) pada berkas basisdata %sgagal menata tanda 'close-on-exec' untuk %.250sgagal menata izin eksekusi untuk '%.250s'gagal menata modus berkas target '%.250s'gagal menata env untuk skrip pengelola paketgagal menata status %s '%.250s'gagal menata status %s '%.250s': %sgagal menata status '%.250s'gagal menata status direktori 'control'gagal menata berkas konfig '%.250s' yang telah dipasanggagal menata status berkas konfig terdistribusi '%.250s' yang barugagal menata status berkas baru lainnya '%.250s'gagal menata status '%.255s' sebelum memasang versi lain gagal menata status berkas sumber '%.250s'gagal menata status berkas tunda pemicu '%.250s'gagal sinkronisasi '%.255s'gagal sinkronisasi berkas '%s'gagal memotong untuk status terbaru dari '%.250s'gagal menulis ke berkas '%s'gagal menulis ke berkas tunda pemicu '%.250s' yang barugagal menulis status fd %dgagal menulis status terbaru dari '%.250s'tanda kutip di '%s' tidak klopgalat tak terduga pada bzip2data tak terduga setelah nama paket dan pemilihan pada baris %dakhir berkas yang tak terduga pada %s dalam %.255sakhir berkas tak terduga saat membaca %sakhir baris tak terduga setelah nama paket pada baris %dakhir baris tak terduga dalam nama paket pada baris %dakhir baris tak terduga dalam berkas 'statoverride'argumen '%s' tak dikenaljenis kompresi '%s' tidak dikenal!Pilihan force/refuse '%.*s' tak dikenalpilihan '%s' tak dikenalpilihan -%c tak dikenalpilihan --%s tak dikenalstatus yang diinginkan tak dikenal pada baris %d: %.250sdibuka tetapi tidak dikonfigurasidirektori 'updates' berisi berkas '%.250s' yang namanya terlalu panjang 
+(panjang=%d, maks=%d)direktori 'updates' berisi berkas dengan panjang namanya berbeda 
+(keduanya %d dan %d)nama ruas definisi pengguna '%.*s' terlalu singkatstring versi mengandung spasistring versi kosonggagal menunggu subproses %sPERINGATANsaat membaca %s: %sketika membuang %.250s, gagal membuang direktori '%.250s': %s - direktori mungkin suatu titik kait?Anda harus menentukan paket dengan namanya masing-masing, bukan dengan mengutip nama berkas-berkas yang dibawanya.
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/insert-header.sin dpkg-1.20.7.1/po/insert-header.sin
--- dpkg-1.20.7.1-orig/po/insert-header.sin	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/insert-header.sin	2021-06-09 18:22:47.473275398 -0500
@@ -0,0 +1,28 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# Copyright (C) 2001 Free Software Foundation, Inc.
+# Written by Bruno Haible <bruno@clisp.org>, 2001.
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to use, copy, distribute, and modify it.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff -Naurp dpkg-1.20.7.1-orig/po/it.gmo dpkg-1.20.7.1/po/it.gmo
--- dpkg-1.20.7.1-orig/po/it.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/it.gmo	2021-06-09 18:25:14.993503487 -0500
@@ -0,0 +1,847 @@
+��� w\A8W?9WayWk�W�GX�Y&�Y=�Y&�YZ-0[.^[�[.�[�[ �[4
+\?\5[\-�\.�\0�\1]$Q]4v]/�]�]q�](e^$�^�^�^:�^6._1e_1�_!�_2�_(`G`W`!q`�`�`�`�`.�`aS$axa�a�a9�am�a)hb:�b9�b.c'6c&^c�c3�c5�cddPd\idv�d[=eU�e�eff"f7fZFf�f�f��f�g=�g�g�g-
+h+8hdh)�h�h�h��h=�jR�j1=kDokL�kAl'Cl&kl(�l'�l+�l4m!Dm,fm9�m-�m�m#n=n$\n�n"�n�n!�n#o%o:oMoaovo"�o2�o1�o/p'Npvp.�p�p-�pRqHXqQ�qA�qe5rf�rIs7Ls<�s�s(�sB�s@tWtrt
�t �t�t5�t1u@5u0vu�u�u#�u!�uv5vKRv7�v5�v-w:w!Twvw'�w-�w-�w x55xkx �x�x"�x!�x"	y!,y$Ny,sy.�y.�y.�y-zHMz6�z(�z>�z$5{ Z{{{�{�{�{��{n|{|#�|:�|-�}~0~A~S~*`~<�~#�~-�~-�H����[���S��N�g
+�
r�����(��-ڋ�8$�<]�.��Ɍ0��3�1E�w��������0`�1��*ÎJ�29��l�&�28�Ek�V���5!�.W�-��+��/��
�%�/D�*t�&��!Ɠ+�B�]W���!��Mܔ*�2@��s���G��!��"!�D�4c�.��5Ǡ3��1�GA�8��,¡�(�7�<�N�Gj���3��)�$�:>�,y�V�� ���*:�e�{�&��3��-�+�,?�	l�v���*��ϥ� �H#�l��s��D�g��j_��ʨ���4s�5���ު����q�u�&��A��{��!x�,��*Ǯ.�!��@��İ H�5i��� ��,ױ$�.)�>X�*��;²,��L+�>x�����j�%�;D���u�����"׶����9�(Y�X��3۷?�8O�2��1��,��:�4U�5��4��A��M7�-����Ǻ#��"�7�K� b�1��%��8ۻ?�"T�Bw�6���&
�.4�!c�!��5��ݽ���%�9�N�	a�9k�.��#Ծ,��%�$D�i���%��ο%���-.�1\�����)��1��:�?Z�&����=��7�T�!n�.��*��#���"�&@�g���0����:���,�@C�+��;��3�� �=�AX���&��-��#�02�;c�0��(��?��)9�-c���"������#��4�EL�����,��"��!�6�$U�5z� ��8��
+��-8�5f�,��B��B�+O�G{�$�� ��:	�;D�3��=�����&�A�7]���D��c��\�2h�*��"��3��:�-X�&����������"�4�WK���(��=��*�J;���"��������-
+�8�)I�%s�#��@��@��'?�g�m�������������)�8�W�!v�!��#����%��%!�'G�,o�������*��'�'D�l�!���� ��-��#�#3�+W�%��$���� ���#�<�O�"e�:����F��$�@�]�$z���������#�$�<�!\�"~�:����5�� 1�2R���%����0��*�$6�/[���6��V��"(�(K�t�<��.��)��(�*C�+n���,��)��4
�3B�2v�4��;��<�6W�:��7��@�0B�;s�?��$��A�=V�>��$��0��!)�K�bf���c��K�:i�<��=��_�H��������)$�)N�+x�+�����$�������\N�&��&��'�� !�7B�tz�2��-"�'P�4x�.��)��G�-N�|�	����k��/(�X�g�>|�%��$��#�&*�!Q�s�!��"��^��@6�w�������%��+�7-�!e�*��(�������'�?�X�Og�8��*���5�A�M�3Y�����7��5��.�|D�
+����m��0Z�G����)��!�?�U�n�3��$��5��%�@�W�"k�4����!��C�=G�%��o��
� )�(J�s�%��7����I�.P�6�!������G�PP�G��.��?�#X�7|�#����+��2$�YW�f��L�Me�&��K��3&�=Z�����=���4'�(\�F��1��;��&:�a�����%��.��.a=e� & 3DT?���"&5-\7����T�.Cr{�"����)<&Y"�"�"��69X7jB�H�&.0U��6��$�4$YuO�
+�
+��
+%$J%c*��
��+�7
+	+B	!n	M�	$�	4
+F8
+@
+6�
+1�
+),C,p#�R� '5$]	�Z�4�2
'O
w
.�
D�
GYOQ�^�%Z+�2�%�%1++]N��!�3*Hs5��"�$2&+Y+�,���"$6[!u*��*�0	0:&k3�4�5�)1,[�D�*�4
+?Wu&�#�#�%�(#.L9{"�'�*.+Z!w�(�(�446[k,�4�#),M"z"�/�/�+ +L-x*�&�!�5T l2�0�&�B#[.��� 1#Ui!�3��*�$>6U4�,�&�1  G 'h .� � 4� 1!+>!#j!�!�!"�!�!""""E"Y"l"!�"(�"�"#�"#:*#"e##�#S�#M$EN$�$(�$(�$*�$.*%0Y%"�%I�%�%4&;&W&(w&�&"�&�&�&'$'B'J'B_'`�'9('=(#e(`�(��(Mm*g�*~#+��+�~,*(-GS-&�-
�--�.6�.5/5F/|/(�/A�/!0=&09d08�0,�061$;1<`15�1�1r�1>^2-�2%�2*�2N3=k35�3:�3'47B4*z4�4-�44�4(#5(L5u5�5-�5�5M�56 -6N6Ci6��6P.7D7G�7"8J/8 z8�8B�8B�8:9>9_K9u�9�!:[�:_;q;�;�;�;�;d�;=<
N<�\<D=L_=�=�=9�=7>'D>9l>�>�>��>b�@o'AI�AA�AK#B=oB2�B1�B3C2FC8yCD�C*�CE"DJhD5�D&�D,E(=E.fE%�E+�E'�E+F-;FiF�F�F�F!�F(�FO(GKxG<�G-H/H:KH�H6�HM�HI)IXsIP�IxJ��JS!K:uKH�K�K8L@JL�L!�L�L�L&�L MA:M;|M@�MD�M>NSN4sN&�N!�N�NSOAeO<�O;�O P'@P!hP<�P8�P7Q%8Q?^Q%�Q&�Q �Q$R)1R$[R$�R3�R5�R:SNJS+�S#�SL�S?6T8vTN�T"�T !U)BUlUsU�U��UBVSV5jVD�V;�W!X2XCXUX2jXF�X1�X;Y<RY��YZ,Z�EZRB[A�[`�_�8c$�d
+fg-:gChg �g<�gP
+h<[h�hI�h>�hE9ii�i�i��i=�j>�j3kWNk=�k��k$�mG�md=n��n#oFCo7�oD�o.p<6psp:�p4�p3�p+,q'Xq.�q?�qq�qar*frU�r�rH�r�Fs�uM�vHz-Q%7�0�D�%S�y�Z��B�.4�#c�C��ˁԁ�[�	b�Fl�-��(�I
+�6T�W��9��0=�n���4��8τE�IN�=��	օ%���-$�R�#l�*��]�������^҈c1�����Y�8�;U�����i��C���)��D�����'��>��+�8 �%Y����B�&ӒC��>�!X�Fz�#��6�I�1f�O��H�[1�F���ԕ���|�M�����q�.u�����ęQٙ0+�^\�7��F�<:�7w�9��4�B�/a�7��+ɜB��b8�(��ĝ ߝ2�*3�^�	f�
p�)~�;��0�L�Ob�&��aٟ?;�){�3��G٠1!�7S�N��ڡ%��#�#@�#d�����G��=�&C�8j�&��0ʣ'��/#�CS�.��CƤ&
+�;1�Jm���*֥9�=;�Hy�J¦/
�$=�Sb�@��"��.�:I�A��,ƨ�)	�33�$g���A���R�%V�|�I��5�c�N�0Ϋ#��I#�,m�4��<Ϭ5�FB�]��H�;0�Kl�4��K��9�3Y�'��+��)�I�EU�����<Ұ=�5M�0��(��Dݱ+"�QN���#��+�:
�5H�O~�Iγ+�WD�.��$˴K�G<�?��Nĵ �4�*G�'r�L��.�J�ya�
۷2�5�4R�B��Lʸ=�4U�������ӹ$��]+���9��Zʺ2%�YX���$Ȼ��
�"%�9H���G��'ۼ+�L/�C|�:����'�*)�/T�/������׾6�')�$Q�'v�1��-п"��4!�/V�4��8��)��)�>H�6��/��1�� �%:�>`�&��8��3��13�Ie�,��*��#�)+�U�#o�����3��\�&]�[��+��0�,=�2j�'��!��(��(�<9�.v�;��6��1�LJ�0��P��+�ME���.��+��<�9@�:z�I����[�mt�9��3�P�Rg�:��?��15�6g�:��&��9�.:�>i�V��L��AL�_��a��IP�M��;��c$�A��Q��W�.t�W��Z��TV�0��;��-�!F�[h�"��z��$b�>��P��L��d�U��=�2O� ����/��/��7"�7Z����-����|��oL�;��6��,/�2\�I�����?`�5��1��?�=H�2��q��:+�f�
+��!�����D7�|���P��3��,%�+R�1~�(��#��*��+(�tT�L���$5�Z�y�,��5��D��,2�8_�-���������0�K�__�U��?�U�t�����G��!��'�F8�G������
+z������50�Xf�+��+��$�+<�h�!��C��1��2�1P�����.��Q��$7�#\�D��A��C�oK���)��?��+4�=`�L�� ��S�1`�8��"�����[%�U��c��>;�Jz�-��A��05�"f�>��4��k��wi�V��N8�=��K��C�6U�$��#��L��"�K9�0��l��L#�kp�2��%�%5�[�${�8��;��t����$�7�,F�Zs�W��&� C�d�|�6��=��X�	_�i�&o�p��<�	D� N�)o�*��������5�&H�Bo�0��0��"�7�6S�&����@��c	�Om�5��>��2R=l
�'�G�(+HRt
+��,�
+0N,n3����7J90�(�Y�.8XgG�C>LB� �7�0'0Xj�*�1(Q	zh�D�:2=m�.�M�FE	Z�	h�	]P
+$�
+M�
+8!.Z7�9�a�T]!�+�@
4A
v
@�
�
)�
+=IG�7�=Ed/�;�+�5=O,�>�B�;<-xH�K�B;4~6��jMm?��$<5\-�,�7�4%8ZE�%�5�05=f,�(��45J=�?�w�?vE�)�7&+^+�?�>�A56w:�4�:0Y(�,�%�6T=O�8�`4|@�+�*&I0pA��!�+@J)�4�!� >% :d 1� ,� 6� %5!([!9�!�!:�!6""I""l"�"*�"*�"%#$&#'K#s#�#�#+�#1�#$&7$%^$B�$+�$+�$]%P}%i�%8&=Q&:�&7�&A':D'''T�'	�'3(#:('^(.�(�(+�() )&@)&g)
+�)�)V�)g
*Uu*+�*-�*i%+0R�0��<�*��pQO�������#UkN���Nv�-D,lO���,�n�J��[�L��)�I"�J5^��!�{��]!L�
���M'{���>��L������a�|���X�1mJ ���7��=����I��U�&�������_v��9�["BK�/p�����/bhf���8$��3�����+����b��#����R	����KM����L�����3��'�f�X2����ApY|��^;�Wr�w^��c[�������T����#u����o���h�~d�AR�[��)|?%<�h���:���g�DQi�l@E�{��@�x5i�����-k��eC	u}��!)l������m��b�d�����+�F/�;V���B��\�����&���g��H��j��s?(��T�7)���������,
+������m�d�e��	�c8�xT�G����`�4cG��"d1�C����(�F�w�4��uw��f:Y�Gy�
+$��"���x�q%y`.��/���H������2��5S����tP���NP����n��JV8��o��R�Y���\6���n�����{}AWi7�
+�
+��K.�Ix��9��\Z=��r@��;����D(�>��tq�����4�i��=�jKy��$^��;�v�e���0��CO��4�����<��0��������VnY�6_(�z��Z�9]
��DE��5����37��B�]UX��|�9�,s1�_�h���>�%���&M����H�z�������UfZ�s��jC�?�S�m~��
l3N��Qw�!HF����
+`�'	�M�E2A�:� b��.�����	�zq$���S�u���~
�1�����2�?����������*�sP:��ZpTE�}k�#�a�tG-6gS+oF�r�k���}q��e���W�-@8>_�v��g��Q6B`~
��O�&� �=y< a��r���]�*.�W���\�c�������*���+��I�'j�t�V�zo��%�a�XP
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on  new Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd bytes.
+ old Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd, main archive=%jd.
+%d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not a regular file%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s subprocess failed with wait status code %d%s subprocess returned error exit status %d%s subprocess was interrupted%s subprocess was killed by signal (%s)%s%s suggests %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%.255s' is not a Debian format archive'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one <archname> argument--%s takes one <pkgname> argument--%s takes one <trigname> argument--%s takes one <version> argument--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s, --status [<package>...]      Display package status details.
+  -p, --print-avail [<package>...] Display available version details.
+  -L, --listfiles <package>...     List files 'owned' by package(s).
+  -l, --list [<pattern>...]        List packages concisely.
+  -W, --show [<pattern>...]        Show information on package(s).
+  -S, --search <pattern>...        Find package(s) owning file(s).
+      --control-list <package>     Print the package control file list.
+      --control-show <package> <file>
+                                   Show the package control file.
+  -c, --control-path <package> [<file>]
+                                   Print path for package control file.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not chroot into maintainer script environmentDo not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Options:
+  --package <package>      name of the package whose copy of <file> will not
+                             be diverted.
+  --local                  all packages' versions are diverted.
+  --divert <divert-to>     the name used by other packages' versions.
+  --rename                 actually move the file aside (or back).
+  --no-rename              do not move the file aside (or back) (default).
+  --admindir <directory>   set the directory with the diversions file.
+  --instdir <directory>    set the root directory, but not the admin dir.
+  --root <directory>       set the directory of the root filesystem.
+  --test                   don't do anything, just demonstrate.
+  --quiet                  quiet operation, minimal output.
+  --help                   show this help message.
+  --version                show the version.
+
+Options:
+  -v, --verbose                    Enable verbose output.
+  -D, --debug                      Enable debugging output.
+      --showformat=<format>        Use alternative format for --show.
+      --deb-format=<format>        Select archive format.
+                                     Allowed values: 0.939000, 2.0 (default).
+      --nocheck                    Suppress control file check (build bad
+                                     packages).
+      --root-owner-group           Forces the owner and groups to root.
+      --[no-]uniform-compression   Use the compression params on all members.
+  -z#                              Set the compression level when building.
+  -Z<type>                         Set the compression type used when building.
+                                     Allowed types: gzip, xz, none.
+  -S<strategy>                     Set the compression strategy when building.
+                                     Allowed values: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use dpkg --contents (= dpkg-deb --contents) to list archive files contents.
+Use dpkg --info (= dpkg-deb --info) to examine archive files.
+Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenUseful environment variables:
+Validatable things: pkgname, archname, trigname, version.
+
+VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchitecture name '%s' is invalid: %sarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' is not a regular filearchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurebuilding an unknown package in '%s'.building package '%s' in '%s'.can't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot access archive '%s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open %scannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open directory '%s'cannot open file %scannot open security status notification channelcannot read %scannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set primary group ID to rootcannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot stat pathname '%s'cannot write file %s into the pagercannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile file contains an empty lineconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file '%s' for package '%s' is missing valuecontrol file '%s' for package '%s' is missing value separatorcontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+diverting file '%s' from an Essential package with rename is dangerous, use --no-renamedone
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is emptyepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while cleaning uperror while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not a Debian binary archive (try dpkg-split?)file '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentformat version with too big major componentformat version with too big minor componentfound unknown packages; this might mean the available database
+is outdated, and needs to be updated through a frontend method;
+please see the FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>generated corrupt ar header for '%s'group '%s' does not existheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalled %s package %s scriptinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal errorinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slaveloading control file '%s' for package '%s'loading files list file for package '%s'local diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnew %s package %s scriptnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no 'control' file in control archive!no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot enough privileges to change root directory with --force-not-root, consider using --force-script-chrootless?not installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete compression type '%s'; use xz insteadobsolete compression type '%s'; use xz or gzip insteadobsolete force/refuse option '%s'obsolete option '--%s'old %s package %s scriptold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoutside error context, abortingoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package architecture is missing or emptypackage contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name '%s' is invalid: %spackage name has characters that aren't lowercase alphanums or '-+.'package not in status nor available database at line %d: %.250spackage signature verificationpackage version numberpager to show filepart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinesplease specify --no-rename explicitly, the default will change to --rename in 1.20.xpre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerevision number is emptyrm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesshowing package list on pagerskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filesyntax error in triggers deferred file '%.250s' at line %d character %zd '%s'takes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo many nested errors during error recoverytoo-long line or missing newline in '%.250s'treewalk root %s is not a directorytrigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name '%s' is invalid: %strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to parse timestamp '%.255s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunexpected pre-existing pathname %sunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunrecoverable fatal error, abortingunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion '%s' has bad syntax: %sversion number does not start with digitversion number is emptyversion string has embedded spacesversion string is emptyversioned Provideswait for %s subprocess failedwait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.19.3
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2018-12-04 12:15+0100
+Last-Translator: Milo Casagrande <milo@milo.name>
+Language-Team: Italian <tp@lists.linux.it>
+Language: it
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n!=1);
+X-Generator: Poedit 2.1.1
+
+ trigger dei pacchetti in attesa che sono o potrebbero essere irresolubili:
+
+Il file di configurazione "%s" non esiste nel sistema.
+Viene installato il nuovo file come richiesto.
+
+Le opzioni di debug possono essere combinate tramite OR bit a bit.
+Notare che i valori e le descrizioni potrebbero cambiare.
+
+Usare "dpkg" per installare e rimuovere pacchetti dal sistema oppure
+"apt" o "aptitude" per un'interfaccia alla gestione dei pacchetti.
+Pacchetti estratti con "dpkg-deb --extract" non saranno installati
+correttamente.
+
+Attenzione: l'uso di opzioni indicate con [!] può danneggiare seriamente
+l'installazione. Le opzioni di forzatura indicate con [*] sono abilitate in
+modo predefinito.
+     Non modificato dopo l'installazione.
+     La versione nel pacchetto è la stessa dell'ultima installazione.
+     non un file normale       %.255s
+   Come procedere? Le opzioni sono:
+    Y o I   : installa la versione del responsabile del pacchetto
+    N od O  : mantiene la versione attualmente installata
+      D     : mostra le differenze tra le versioni
+      Z     : avvia una shell per esaminare la situazione
+  %.250s (versione %.250s) è presente e %s.
+  %.250s (versione %.250s) sta per essere installato.
+  %.250s è %s.
+  %.250s è installato, ma la versione è la %.250s.
+  %.250s non è installato.
+  %.250s sta per essere de-configurato.
+  %.250s sta per essere installato, ma la versione è la %.250s.
+  %.250s sta per essere rimosso.
+  %.250s è stato estratto, ma non è mai stato configurato.
+  %.250s è stato estratto, ma la versione è la %.250s.
+  l'ultima versione configurata di %.250s è la %.250s.
+  %.250s fornisce %.250s, è presente e %s.
+  %.250s fornisce %.250s e sta per essere installato.
+  %.250s fornisce %.250s, ma è %s.
+  %.250s fornisce %.250s, ma sta per essere de-configurato.
+  %.250s fornisce %.250s, ma sta per essere rimosso.
+  %s (%s) fornisce %s.
+  -?, --help                         Mostra questo aiuto
+      --version                      Mostra la versione
+
+  Il pacchetto %s è in attesa dell'elaborazione dei trigger.
+  Il pacchetto %s non è ancora configurato.
+  Il pacchetto %s non è installato.
+  Il pacchetto %s sta per essere rimosso.
+  Il pacchetto %s che fornisce %s è in attesa dell'elaborazione dei trigger.
+  Il pacchetto %s che fornisce %s non è ancora configurato.
+  Il pacchetto %s che fornisce %s non è installato.
+  Il pacchetto %s che fornisce %s sta per essere rimosso.
+  La versione di %s nel sistema è %s.
+  La versione di %s nel sistema, fornita da %s, è %s.
+  La versione di %s da configurare è %s.
+  il collegamento %s è %s  la versione migliore del collegamento è %s  versione migliore del collegamento non disponibile  il collegamento è attualmente assente  il collegamento attualmente punta a %s  slave %s è %s  slave %s: %s %7jd byte, %5d righe   %c  %-20.127s %.127s
+ %d in %s:  %d pacchetto, dalle seguenti sezioni: %d pacchetti, dalle seguenti sezioni: %s (%jd byte)
+ %s (%s) danneggia %s ed è %s.
+ %s (non un file normale)
+ ==> Eliminato (dall'utente o da uno script) dopo l'installazione.
+ ==> File nel sistema creato dall'utente o da uno script.
+ ==> File anche nel pacchetto fornito dal responsabile del pacchetto.
+ ==> Viene mantenuto il vecchio file di configurazione come valore predefinito.
+ ==> Modificato (dall'utente o da uno script) dopo l'installazione.
+ ==> Il distributore del pacchetto ha fornito una versione aggiornata.
+ ==> Viene usato il vecchio file.
+ ==> Viene usato il nuovo file di configurazione come valore predefinito.
+ ==> Viene usato il nuovo file.
+ Pacchetto %s: porzioni  L'azione predefinita consiste nell'installare la nuova versione.
+ L'azione predefinita consiste nel mantenere la versione attuale.
+ e  dipende da  nuovo pacchetto Debian, versione %d.%d.
+ dimensione %jd byte: archivio di controllo=%jd byte.
+ vecchio pacchetto Debian, versione %d.%d.
+ dimensione %jd byte: archivio di controllo=%jd, archivio principale=%jd.
+%d programma atteso non è stato trovato in PATH o non è eseguibile
+%s%d programmi attesi non sono stati trovati in PATH o non sono eseguibili
+%s%d file o directory attualmente installato.)
+%d file e directory attualmente installati.)
+Manca %d dei componenti di controllo richiestoMancano %d dei componenti di controllo richiesto%s (sottoprocesso): %s
+%s - priorità %d%s danneggia %s%s è in conflitto con %s%s danneggiato: %sOpzioni di debug di %s, --debug=<ottale> oppure -D<ottale>:
+
+ Numero  Rif. nel sorgente Descrizione
+%s dipende da %s%s estende %sOpzioni di forzatura di %s - Comportamento in caso di problemi:
+  Avvisa ma continua:  --force-<elemento>,<elemento>,...
+  Ferma con un errore: --refuse-<elemento>,<elemento>,... | --no-force-<elemento>,...
+ Elementi di forzatura:
+%s non è un file regolare%s non è installato correttamente, le relative dipendenze verranno ignorate%s pre-dipende da %s%s raccomanda %sil sottoprocesso %s è terminato con un codice di wait %dil sottoprocesso %s ha restituito lo stato di errore %dil sottoprocesso %s è stato interrottoil sottoprocesso %s è stato terminato dal segnale (%s)%s%s suggerisce %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Versione formato della porzione:   %d.%d
+    Porzione del pacchetto:            %s
+        ... versione:                  %s
+        ... architettura:              %s
+        ... checksum MD5:              %s
+        ... lunghezza:                 %jd byte
+        ... spezzato ogni:             %jd byte
+    Numero della porzione:             %d/%d
+    Lunghezza della porzione:          %jd byte
+    Offset della porzione:             %jd byte
+    Dimensione file (porzione usata):  %jd byte
+
+%s: il file di configurazione "%.250s" non è un file normale o un collegamento simbolico (= "%s")%s: il file di configurazione "%.250s" indica un nome file rovinato
+ ("%s" è un collegamento simbolico a "%s")%s: il file di configurazione "%s" è un collegamento circolare
+ (= "%s")%s: problemi con le dipendenze, ma viene configurato comunque:
+%s%s: problemi con le dipendenze, ma i trigger vengono elaborati comunque:
+%s%s: problemi con le dipendenze, ma viene rimosso comunque:
+%s%s: errore nel legare l'input allo stream di bzip2%s: errore nel legare l'input allo stream di gzip%s: errore nel legare l'output allo stream di bzip2%s: errore nel legare l'output allo stream di gzip%s: collegamento di "%.250s" a "%.250s" non riuscito: %s%s: rimozione di "%.250s" (prima di sovrascriverlo) non riuscita: %s%s: rimozione di "%.250s" non riuscita: %s%s: rimozione della vecchia copia di backup "%.250s" non riuscita: %s%s: rimozione della vecchia versione distribuita "%.250s" non riuscita: %s%s: rinomina di "%.250s" in "%.250s" non riuscita: %s%s: errore interno di lettura di bzip2%s: errore interno di lettura di bzip2: "%s"%s: errore interno di scrittura di bzip2%s: errore interno di scrittura di bzip2: "%s"%s: errore interno di lettura di gzip%s: errore interno di lettura di gzip: "%s"%s: errore interno di scrittura di gzip%s: errore interno di scrittura di gzip: %s%s: errore interno di scrittura di gzip: "%s"%s: errore di chiusura di lzma%s: errore di lzma: %s%s: errore di lettura di lzma%s: errore di scrittura di lzma%s: errore copia pass-through: %s%s: impossibile aprire %s per l'hash: %s%s: impossibile eseguire readlink sul file di configurazione "%s"
+ (= "%s"): %s%s: impossibile eseguire stat sul file di configurazione "%s"
+ (= "%s"): %s"%.255s" non contiene alcun componente di controllo "%.255s""%.255s" non è un archivio in formato Debian"%s" è discordante da "%s""%s" contiene un valore Priority "%s" definito dall'utente"%s" non accetta alcun valorecampo "%s", nome del pacchetto "%.255s" non valido: %scampo "%s", manca il nome dell'architettura oppure il valore è indecifrabilecampo "%s", manca il nome del pacchetto oppure il valore è indecifrabilecampo "%s", riferimento a "%.255s":
+ "%c" è obsoleto, usare "%c=" o "%c%c" al suo postocampo "%s", riferimento a "%.255s":
+ la relazione tra le versioni %c%c è erratacampo "%s", riferimento a "%.255s":
+ corrispondenza implicita esatta sul numero di versione, è consigliato l'uso di "="campo "%s", riferimento a "%.255s":
+ numero di versione iniziante con un carattere non alfanumerico,
+ è consigliato aggiungere uno spaziocampo "%s" field, riferimento a "%.255s": nome architettura "%.255s" non valido: %scampo "%s", riferimento a "%.255s": versione non terminatacampo "%s", errore di sintassi dopo il riferimento al pacchetto "%.255s""%s" richiede un valore"%s" non è stato trovato in PATH o non è un eseguibile(Impossibile trovare %s che è stato completamente sostituito.)
+(Lettura del database... (nessuna descrizione disponibile)(totale %jd byte)
+, eseguito un core dumpl'opzione -%c non accetta alcun valorel'opzione -%c richiede un valore--%s --pending non accetta alcun argomento che non sia un'opzione--%s --recursive richiede almeno un percorso come argomento--%s non supporta ancora la lettura di .deb dallo standard input--%s richiede il nome di un file .deb e una directory come argomenti--%s richiede <nome>--%s richiede <nome> <percorso>--%s richiede il nome di un file .deb come argomento--%s richiede un argomento <directory>--%s richiede un argomento <file>--%s richiede un solo argomento--%s richiede come argomento una directory di destinazione.
+Usare "dpkg --install"?--%s richiede un nome di pacchetto valido. "%.250s" non lo è: %s--%s richiede almeno un archivio di pacchetto come argomento--%s richiede il nome di almeno un pacchetto come argomento--%s richiede quattro argomentil'opzione --%s non accetta alcun valorel'opzione --%s richiede un valore--%s richiede un numero positivo in base otto come argomento--%s richiede uno o più nomi di porzioni come argomenti--%s accetta al massimo un file Packages come argomento--%s accetta al massimo due argomenti--%s accetta al massimo due argomenti (un .deb e una directory)--%s accetta esattamente un argomento--%s accetta esattamente due argomenti--%s non accetta alcun argomento--%s accetta un argomento <nomearch>--%s accetta un argomento <nomepacchetto>--%s accetta un argomento <nometrig>--%s accetta un argomento <versione>--%s accetta il nome di un pacchetto come argomento--%s accetta un solo argomento (un nome di file .deb)--%s utilizzato con l'operatore di relazione obsoleto "%s"--auto richiede esattamente il nome di una porzione di archivio come argomento--auto richiede l'uso dell'opzione --output--compare-versions operatore errato--compare-versions richiede tre argomenti: <versione> <operatore> <versione>--search richiede almeno un modello di nome file come argomento--split richiede un nome di file sorgente come argomento--split accetta al più un nome di file sorgente e un prefisso di destinazionefornito --update, ma %s non esiste--update è inutile per --remove... sembra tutto sia andato correttamente.../%s; tuttavia:
+<compress> da tar -cf<deb> è il nome di un archivio nel formato Debian.
+<cfile> è il nome di uno dei file di amministrazione.
+<cfield> è il nome di un campo nel file "control" principale.
+
+<decompressione><dpkg-deb --info pipe><collegamento> e <percorso> non possono essere uguali<coll> è il collegamento simbolico che punta a %s/<nome>.
+  (es. /usr/bin/pager)
+<nome> è il nome principale per questo gruppo.
+  (es. pager)
+<perc> è il percorso di uno dei file alternativi.
+  (es. /usr/bin/less)
+<priorità> è un intero; opzioni con numeri maggiori hanno priorità maggiore in
+  modalità automatica.
+
+<stato del pacchetto e descrittore del file di avanzamento><standard error><standard input><standard output>Viene aggiunto "%s"
+Consente l'installazione di pacchetti in conflittoAlternativa %s non modificata poiché la scelta %s non è disponibile.Installa sempre i file di configurazione mancantiUsa sempre i nuovi file di configurazione, non chiede nullaUsa sempre i vecchi file di configurazione, non chiede nullaUn altro processo ha bloccato il database in scrittura e potrebbe modificarlo.
+Alcuni dei seguenti problemi potrebbero essere causati da ciò.
+ArchitetturaAutenticazione di %s...
+Comandi:
+  --add <proprietario> <gruppo> <modalità> <percorso>
+                           Aggiunge un nuovo <percorso> al database
+  --remove <percorso>      Rimuove <percorso> dal database
+  --list [<glob-pattern>]  Elenca gli override nel database
+
+Comandi:
+  --check-supported                Verifica che dpkg supporti i trigger
+
+Comandi:
+  --install <coll> <nome> <perc> <priorità>
+    [--slave <coll> <nome> <perc>] ...
+                           Aggiunge un gruppo di alternative al sistema
+  --remove <nome> <perc>   Rimuove <perc> dal gruppo di alternative <nome>
+  --remove-all <nome>      Rimuove il gruppo <nome> dalle alternative di sistema
+  --auto <nome>            Imposta il collegamento master <nome> in modalità automatica
+  --display <nome>         Visualizza informazioni riguardo al gruppo <nome>
+  --query <nome>           Versione analizzabile da computer di --display <nome>
+  --list <nome>            Visualizza tutti gli obiettivi del gruppo <nome>
+  --get-selections         Elenca i nomi delle alternative master e il loro stato
+  --set-selections         Legge lo stato dell'alternativa dallo standard input.
+  --config <nome>          Mostra alternative per il gruppo <nome> e chiede all'utente
+                           di selezionare quella da usare
+  --set <nome> <perc>      Imposta <perc> come alternativa di <nome>
+  --all                    Chiama --config su tutte le alternative
+
+Comandi:
+  -s, --status [<pacchetto>...]      Visualizza dettagli sullo stato del pacchetto
+  -p, --print-avail [<pacchetto>...] Visualizza dettagli sulla versione
+  -L, --listfiles [<pacchetto>...]   Elenca i file del pacchetto
+  -l, --list [<modello>...]          Elenca brevemente i pacchetti
+  -W, --show [<modello>...]          Mostra informazioni sui pacchetti
+  -S, --search <modello>...          Trova i pacchetti a cui appartengono i file
+      --control-list <pacchetto>     Stampa l'elenco del file di controllo del
+                                     pacchetto
+      --control-show <pacchetto> <file>
+                                     Mostra il file di controllo del pacchetto
+  -c, --control-path <pachetto> [<file>]
+                                     Stampa il percorso del file di controllo
+                                     del pacchetto
+
+Comandi:
+  -s|--split <file> [<prefisso>]      Suddivide un archivio
+  -j|--join <porzione> <porzione>...  Unisce le porzioni
+  -I|--info <porzione> ...            Mostra informazioni su una porzione
+  -a|--auto -o <completo> <porzione>  Accumula automaticamente le porzioni
+  -l|--listq                          Elenca le porzioni non corrispondenti
+  -d|--discard [<porzione> ...]       Scarta le porzioni non corrispondenti
+
+Comandi:
+  [--add] <file>           Aggiunge una deviazione
+  --remove <file>          Rimuove la deviazione
+  --list [<glob-pattern>]  Mostra i file diversificati
+  --listpackage <file>     Mostra quale pacchetto diversifica il file
+  --truename <file>        Ritorna il file diversificato
+
+Operatori di confronto per --compare-versions:
+ lt le eq ne ge gt       (senza versione considera sempre precedente)
+ lt-nl le-nl ge-nl gt-nl (senza versione considera sempre successivo)
+ < << <= = >= >> >       (solo per compatibilità con sintassi del file di controllo)
+
+File di configurazione "%s"
+File di configurazione "%s" (realmente "%s")
+Configura qualsiasi pacchetto che potrebbe essere di aiuto a questoDe-configurazione di %s (%s)...
+De-configurazione di %s (%s) per poter rimuovere %s (%s)...
+Strumento di interrogazione della gestione dei pacchetti Debian %s versione %s.
+Utilità per i trigger dei pacchetti Debian %s versione %s.
+Debian %s versione %s.
+Debian "%s", backend di gestione degli archivi di pacchetti versione %s.
+Debian "%s", programma di gestione dei pacchetti versione %s.
+Debian "%s", strumento per lo split/join dei pacchetti; versione %s.
+%s eliminato.
+Dipendenze e conflittiDescrizioneVoluto=U (non noto)/I (installato)/R (rimosso)/P (rimosso totale)/H (in attesa)
+| Stato=Non/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(nessuno)/R (reinstallazione richiesta) (Stato,Err: maiuscolo=grave)
+Non esegue chroot nell'ambiente dello script del responsabileNon esegue operazioni sicure di I/O quando estrae un pacchettoSi sono verificati degli errori nell'elaborazione:
+Stato di uscita:
+  0 = ok
+  1 = con --auto, il file non è una porzione
+  2 = problemi
+Il file "%.250s" non è parte di un archivio multi-porzioni.
+Sintassi del formato:
+  Un formato è una stringa di output per ogni pacchetto. Il formato
+  può comprendere le normali sequenze di escape \n (newline), \r (carriage
+  return) oppure \\ (backslash). Le informazioni sul pacchetto possono essere
+  incluse, inserendo riferimenti variabili ai campi dei pacchetti, utilizzando
+  la sintassi ${var[;width]}. I campi saranno allineati a destra a meno che la
+  larghezza non abbia valore negativo, nel qual caso l'allineamento sarà a
+  sinistra.
+Informazioni generali di avanzamentoViene ignorata la richiesta di rimuovere la deviazione condivisa "%s".
+Viene ignorata la richiesta di rinominare il file "%s" di proprietà del pacchetto che diverge "%s"
+Le informazioni 	riguardo a %d pacchetto sono state aggiornate.
+Le informazioni riguardo a %d pacchetti sono state aggiornate.
+Quantità folli di stupidagginiInstalla un pacchetto anche se il controllo di autenticità non riesceInstalla comunque anche se danneggia un altro pacchettoInstallazione della nuova versione del file di configurazione %s...
+Chiamata e stato degli script del responsabileSono presenti dei file inutili nella directory di deposito:
+Viene lasciato "%s"
+Stampa molto output riguardo alle dipendenze e i conflittiMolte stupidaggini riguardo alla directory dpkg/infoStampa molto output per ogni file di configurazioneStampa molto output per ogni file elaboratoStampa molto output riguardo ai triggerfine file MSDOS (^Z) nel nome del campo "%.*s"fine file MSDOS nel valore del campo "%.*s" (newline mancante?)È stata estratta più di una copia del pacchetto %s
+ durante questa sessione. Viene configurato una sola volta.
+NomeNessuna deviazione "%s", nessuna rimossa.
+Nota: la variabile PATH di root dovrebbe contenere /usr/local/sbin, /usr/sbin e /sbinNulla da configurare.Chiede di sostituire i file di configurazione con nessuna nuova versioneOpzioni:
+  --admindir=<directory>           Usa la <directory> al posto di %s
+  --by-package=<pacchetto>         Scavalca l'attesa per i trigger
+                                   (impostata normalmente da dpkg)
+  --await                          Il pacchetto deve aspettare l'elaborazione
+  --no-await                       Nessun pacchetto deve aspettare l'elaborazione
+  --no-act                         Esegue solo i test, non modifica nulla
+
+Opzioni:
+  --depotdir <directory>           Usa <directory> al posto di %s/%s
+  -S|--partsize <dim>              In KiB, per -s (predefinito è 450)
+  -o|--output <file>               Nome del file, per -j (predefinito è
+                                   <pacchetto>_<versione>_<arch>.deb)
+  -Q|--npquiet                     Ignora quando -a non è una porzione
+  --msdos                          Genera nomi di file in formato 8.3
+
+Opzioni:
+  --package <pacchetto>    Nome del pacchetto la cui copia di <file>
+                           non verrà diversificata
+  --local                  Tutte le versioni dei pacchetti sono diversificate
+  --divert <deviato-a>     Il nome usato dalle altre versioni dei pacchetti
+  --rename                 Sposta il file
+  --no-rename              Non sposta il file (predefinito)
+  --admindir <directory>   Imposta la directory con il file delle deviazioni
+  --instdir <directory>    Imposta la directory di root, ma non quella di admin
+  --root <directory>       Imposta la directory del file system di root
+  --test                   Non fa nulla, sola dimostrazione
+  --quiet                  Modalità silenziosa, output minimo
+  --help                   Mostra questo messaggio di aiuto
+  --version                Mostra la versione
+
+Opzioni:
+  -v, --verbose                    Abilita output prolisso
+  -D, --debug                      Abilita output di debug
+      --showformat=<formato>       Usa formato alternativo per --show
+      --deb-format=<formato>       Seleziona il formato dell'archivio.
+                                   Valori ammessi:
+                                     0.939000, 2.0 (predefinito)
+      --nocheck                    Disattiva la verifica del file di controllo
+                                   (crea pacchetti scadenti)
+      --root-owner-group           Forza il proprietario e il gruppo a root
+      --[no-]uniform-compression   Usa i parametri di compressione su tutti 
+                                   i membri
+  -z#                              Imposta il livello di compressione usato
+                                   nella generazione del pacchetto
+  -Z<tipo>                         Imposta il tipo di compressione usato
+                                   nella generazione del pacchetto
+                                   Valori ammessi: gzip, xz, none
+  -S<strategia>                    Imposta la strategia di compressione per la
+                                   generazione del pacchetto
+                                   Valori ammessi: none, extreme (xz), filtered
+                                   huffman, ile, fide (gzip)
+
+Stampa output per ogni file di configurazioneStampa output per ogni file elaboratoSovrascrive un file che diverge con uno che non divergeSovrascrive un file da un pacchetto con un altroSovrascrive la directory di un pacchetto con quella di un altro filePATH non contiene programmi necessarivariabile PATH non impostataIl pacchetto %s è bloccato, non viene considerato. Usare --force-hold per sovrascrivere.
+Il pacchetto %s è indicato più volte, viene elaborato una sola.
+Il pacchetto "%s" non contiene alcun file (!)
+Pacchetti non ancora riassemblati:
+La porzione %d del pacchetto %s è stata accorpata (mancano ancora PercorsoCampo pre-dipendePreparativi per estrarre %s...
+Premere Invio per mantenere il valore predefinito[*] o digitare il numero della selezione: PrioritàElabora anche i pacchetti con architettura errata o senza architetturaElabora anche i pacchetti con versioni errateElaborazione dei trigger per %s (%s)...
+L'operazione è stata bloccata perché si sono verificati troppi errori.
+Eliminazione dei file di configurazione di %s (%s)...
+Creazione del pacchetto %s da %d porzione: Creazione del pacchetto %s da %d porzioni: Informazioni riguardo a %s provenienti da %s registrate.
+Rimuove un pacchetto essenzialeRimuove i pacchetti che richiedono installazioneRimozione di %s (%s)...
+Rimozione di "%s"
+Sostituisce un pacchetto con una versione precedenteSostituiti dai file nel pacchetto %s (%s) installato...
+Sostituzione delle informazioni sui pacchetti disponibili usando %s.
+Sostituzione dei file nella versione precedente del pacchetto %s (%s)...
+Selezionato il pacchetto %s non precedentemente selezionato.
+SelezioneImposta tutte le opzioni di forzaturaConfigurazione di %s (%s)...
+Quantità folli di output riguardo ai triggerSalta riga non valida: %sAlternativa %s sconosciuta saltata.Ignorato il pacchetto non selezionato %s.
+Suddivisione del pacchetto %s in %d porzione: Suddivisione del pacchetto %s in %d porzioni: StatoI seguenti pacchetti sono in attesa dell'elaborazione dei trigger che hanno
+attivato in altri pacchetti. L'elaborazione può essere avviata utilizzando
+"dselect" o "dpkg --configure --pending" (oppure "dpkg --triggers-only"):
+I seguenti pacchetti presentano degli errori a causa di gravi problemi durante
+l'installazione. È necessario reinstallarli, assieme a qualsiasi pacchetto che
+vi dipenda, affinché funzionino correttamente:
+I seguenti pacchetti non hanno il file di controllo nel database,
+devono essere reinstallati:
+Ai seguenti pacchetti manca il file di controllo md5sums nel database,
+devono essere reinstallati:
+I seguenti pacchetti risultano parzialmente configurati. La configurazione
+dovrebbe essere ritentata usando "dpkg --configure <pacchetto>" o con
+l'opzione di configurazione nel menù di dselect:
+I seguenti pacchetti risultano parzialmente installati. L'installazione
+può probabilmente essere completata ritentandola; i pacchetti possono
+essere rimossi usando "dselect" o "dpkg --remove":
+I seguenti pacchetti non dispongono di un'architettura:
+I seguenti pacchetti hanno un'architettura non consentita:
+I seguenti pacchetti hanno un'architettura "foreign" non riconosciuta, e potrebbe
+causare problemi con le dipendenze nei front-end. Ciò può essere risolto
+registrando l'architettura con "dpkg --add-architecture":
+I seguenti pacchetti risultano nello stato "triggered", ma l'elaborazione
+dei trigger non si è verificata. È possibile attivarla utilizzando "dselect"
+o "dpkg --configure --pending" (oppure "dpkg --triggers-only"):
+I seguenti pacchetti sono stati estratti, ma non ancora configurati.
+È necessario configurarli usando "dpkg --configure" o l'opzione di
+configurazione nel menù di dselect affinché funzionino:
+È disponibile %d scelta per l'alternativa %s (che fornisce %s).Sono disponibili %d scelte per l'alternativa %s (che fornisce %s).Non c'è alcun programma che fornisce %s.È presente una sola alternativa nel gruppo %s (che fornisce %s): %sQuesto è software libero; consultare la GNU General Public Licence versione 2
+o successiva per le condizioni di copia. NON c'è alcuna garanzia.
+Attivazione ed elaborazione dei triggerTenta di installare/rimuovere i pacchetti anche se non è rootRende avvisi tutti i problemi di dipendenzeRende avvisti tutti i problemi di versione di dipendenzeDigitare "exit" una volta terminato.
+Usare dpkg --help per un aiuto sull'installazione e la rimozione dei pacchetti [*].
+Usare "apt" o "aptitude" per un'interfaccia alla gestione dei pacchetti.
+Usare dpkg -Dhelp per l'elenco delle opzioni di debug per dpkg.
+Usare dpkg --force-help per l'elenco delle opzioni di forzatura.
+Usare dpkg-deb --help per un aiuto sulla manipolazione dei file *.deb.
+
+Le opzioni indicate con [*] producono output prolisso - creare una pipe con "less" o "more".Usare "dpkg-deb --help" per l'aiuto sulla gestione dei file *.deb;
+Usare "dpkg --help" per l'aiuto sull'installazione e rimozione dei pacchetti.Usare "dpkg-split --help" per l'aiuto.Usare "dpkg-trigger --help" per l'aiuto riguardo a questa utilità.Estrazione di %s (%s)...
+Estrazione di %s (%s) su (%s)...
+Aggiornamento delle informazioni sui pacchetti disponibili usando %s.
+Uso: %s [<opzione> ...] <comando>
+
+Usare "%s --help" per un aiuto sull'uso del programma.Usare "apt" o "aptitude" per un'interfaccia alla gestione dei pacchetti.
+Usare --help per un aiuto sui file diversificati.Usare --help per un aiuto su come scavalcare le informazioni di stato del file.Usare --help per un aiuto su come eseguire interrogazioni sui pacchetti.Usare "dpkg --contents" (= "dpkg-deb --contents") per elencare il contenuto degli archivi.
+Usare "dpkg --info" (= "dpkg-deb --info") per esaminare gli archivi.
+
+Usare dpkg con -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+sugli archivi (digitare %s --help).
+
+Usa l'opzione predefinita per i nuovi file di
+configurazione se ne è disponibile una, senza chiedere
+nulla. Se non può essere trovato alcun valore
+predefinito, viene chiesto a meno che non sia usata
+una delle opzioni confold o confnew.Variabili d'ambiente utili:
+Elementi che possono essere validati: pkgname, archname, trigname, version.
+
+VersioneLa versione di dpkg con supporto %s funzionante non è ancora configurata.
+ Usare "dpkg --configure dpkg" e provare nuovamente.
+Durante l'aggiunta, l'opzione predefinita è --local e --divert <originale>.distribuzione.
+Durante la rimozione, --package o --local e --divert devono corrispondere se specificati.
+Gli script preinst/postrm dovrebbero sempre specificare --package e --divert.
+Tentativo di rimuovere o eliminare %s (%s)...
+[predefinito=N][predefinito=Y][nessun predefinito]admindir deve essere all'interno di instdir affinché dpkg funzioni correttamenteviene configurato anche "%s" (richiesto da "%s")l'alternativa %s (parte del gruppo %s) non esiste; viene rimossa dall'elenco delle alternativel'alternativa %s non può essere master: è slave di %sl'alternativa %s non può essere slave di %s: è un'alternativa masterl'alternativa %s non può essere slave di %s: è slave di %salternativa %s per %s non registrata, non viene rimossaalternativa %s per %s non registrata, non viene impostatail collegamento alternativo %s è già gestito da %sil collegamento alternativo %s è già gestito da %s (slave di %s)il collegamento alternativo non è assoluto: %sil nome alternativo (%s) non deve contenere "/" e spaziil percorso alternativo non è assoluto: %snome del pacchetto "%s" ambiguo con più di una istanza installataesiste già un override per "%s", ma l'opzione --force è stata specificata, quindi viene ignoratoesiste già un override per "%s", uscitaqualsiasi deviazione di %squalsiasi deviazione di %s in %slunghezza nome del componente ar "%s" troppo lungadimensione %jd componente ar troppo grande<vuota><nessuna><sconosciuta>l'architettura "%s" non è consentita: %sl'architettura "%s" è riservata e non può essere aggiuntail nome dell'architettura "%s" non è valido: %sl'archivio "%.250s" contiene due elementi di controllo, operazione annullatal'archivio "%s" contiene un elemento "%.*s" prima di "%s", operazione annullatal'archivio "%s" non è un file normalel'archivio "%s" utilizza una compressione sconosciuta per l'elemento "%.*s", operazione annullatal'archivio contiene l'oggetto "%.255s" di tipo sconosciuto 0x%xdimensione elemento archivio di controllol'archivio ha un formato di versione non valido: %sdimensione dell'elemento di controllo "%s" dell'archivio mal formattatal'archivio non contiene newline nell'intestazionecomponente intestazione dell'informazione dell'archiviol'archivio ha versione %d.%d, installare una versione più recente di dpkg-debnumero magico dell'archiviointestazione componente dell'archivionumeri della porzione dell'archiviooffset della porzione dell'archivionumero delle porzioni dell'archiviodimensione totale dell'archiviomodalità automaticagli aggiornamenti automatici di %s/%s sono disabilitati, lasciato cosìin attesa dell'elaborazione del trigger da un altro pacchettoriga vuota nel valore del campo "%.*s"difettoso per una rimozione o installazione non riuscitadifettoso per un postinst non riuscitogenerazione di un pacchetto sconosciuto in "%s".generazione del pacchetto "%s" in "%s".impossibile installare la scelta %s sconosciutaimpossibile eseguire mmap sulle informazioni del pacchetto "%.255s"impossibile rimuovere il vecchio script postrmimpossibile eseguire stat sulle informazioni del pacchetto "%.255s"impossibile accedere all'archivio "%s"impossibile appendere il file componente ar (%s) a "%s": %simpossibile aggiungere la porzione "%s" del pacchetto suddiviso a "%s": %simpossibile aggiungere a "%s"impossibile chiudere la pipe di estrazioneimpossibile calcolare l'hash MD5 per il file "%.255s": %simpossibile calcolare l'hash MD5 per il file tar "%.255s": %simpossibile convertire una sequenza multi-byte "%s" in un carattere wideimpossibile convertire una stringa multi-byte "%s" in una a caratteri wideimpossibile copiare "%s" nell'archivio "%s": %simpossibile copiare "%s" in "%s": %simpossibile copiare il componente dell'archivio da "%s" alla pipe di estrazione: %simpossibile copiare i dati estratti per "%.255s" in "%.255s": %simpossibile divergere le directoryimpossibile divergere il file "%s" a se stessoimpossibile estrarre il file di controllo "%s" da "%s": %simpossibile estrarre la porzione "%s" del pacchetto suddiviso: %simpossibile ottenere il gestore di sicurezzaimpossibile aprire %simpossibile aprire "%.255s" (in "%.255s")impossibile aprire la porzione di archivio "%.250s"impossibile aprire la directory "%s"Impossibile aprire il file %simpossibile aprire il canale di notifica dello stato di sicurezzaimpossibile leggere %simpossibile leggere la directory del file di configurazione "%.250s" (da "%.250s")impossibile leggere la directory infoimpossibile rimuovere "%.250s"impossibile rimuovere l'architettura "%s" attualmente in uso dal databaseimpossibile rimuovere l'architettura "%s" non-foreignimpossibile rimuovere la vecchia copia di backup del file di configurazione "%.250s") (di "%.250s")impossibile rimuovere il vecchio file di configurazione "%.250s") (= "%.250s")impossibile rimuovere il vecchio elenco dei fileimpossibile rinominare "%s" in "%s"impossibile soddisfare le pre-dipendenze per %.250s (richiesto da %.250s)impossibile analizzare la directory "%.255s"impossibile analizzare la directory updates "%.255s"impossibile verificare i requisiti delle pre-dipendenze:
+ %simpossibile impostare l'ID del gruppo primario a rootimpossibile impostare il contesto di sicurezza per l'oggetto file "%s"impossibile impostare il contesto di sicurezza per l'esecuzione dello script del responsabileimpossibile saltare il componente dell'archivio di controllo da "%s": %simpossibile saltare il componente dell'archivio da "%s": %simpossibile saltare il file "%.255s" dalla pipe (sostituito o escluso?): %simpossibile saltare il padding del file "%.255s": %simpossibile tralasciare l'intestazione del pacchetto suddiviso per "%s": %simpossibile eseguire stat su %simpossibile eseguire stat su "%.255s" (in "%.255s")impossibile eseguire stat sul file "%s"impossibile eseguire stat del percorso "%s"impossibile scrivere il file %s nel pagerimpossibile rimuovere possibili caratteri nulli terminali da dpkg-deb: %scarattere "%c" non consentito (solo lettere, numeri e caratteri "%s")i dati compressi sono rovinaticompressione membro taril file di configurazione "%.250s" non compare nel pacchettoimpossibile eseguire stat sul file di configurazione "%.250s"il file di configurazione "%s" non è un file normalevisualizzatore differenze file di configurazioneil file conffile contiene una riga vuotail nome del file di configurazione "%s" contiene spazi vuoti in codail file di configurazione "%s" è duplicatoil nome del file di configurazione "%s" è troppo lungo o manca il newline finaleshell file di configurazioneerrore di configurazione: %s:%d: %sazioni -%c (--%s) e -%c (--%s) in conflittoconflitti con le deviazioni relative a "%.250s" o "%.250s"pacchetti in conflitto - %.250s non verrà installatopossibile de-configurazione di %s che potrebbe essere rovinato a causa di %s...possibile de-configurazione del pacchetto
+ essenziale %s per abilitare %spossibile rimozione di %s al posto di %s...la directory di controllo ha dei permessi errati: %03lo (devono essere >=0755 e <=0775)la directory di controllo non è una directoryil file di controllo "%s" non esisteil file di controllo "%s" per il pacchetto "%s" contiene un nome file vuotoal file di controllo "%s" per il pacchetto "%s" manca il newline finaleal file di controllo "%s" per il pacchetto "%s" manca il valoreal file di controllo "%s" per il pacchetto "%s" manca il separatore del valoreil file di controllo contiene %celemento controlloformato file "%s" del database danneggiatoimpossibile aprire il registro "%s": %simpossibile eseguire stat del vecchio file "%.250s", non viene eliminato: %simpossibile aprire "%i" per ricevere il flussol'alternativa %s attuale non è conosciuta, si passa a %s per il gruppo %strovato un ciclo nell'elaborazione dei trigger
+ elenco dei pacchetti i cui trigger sono o potrebbero essere responsabili:elemento datiproblemi con le dipendenze - trigger non elaboratiproblemi con le dipendenze - lasciato non configuratoproblemi con le dipendenze - rimozione non possibileproblemi con le dipendenze impediscono la configurazione di %s:
+%sproblemi con le dipendenze impediscono l'elaborazione dei trigger per %s:
+%sproblemi con le dipendenze impediscono la rimozione di %s:
+%seliminazione del collegamento slave %s (%s) obsoletodeviazione di %s da: %s
+deviazione di %s in: %s
+deviazione di %s da %sdeviazione di %s in %s da %sdivert-to non può contenere newlinediverge da %s in: %s
+deviare il file "%s" da un pacchetto Essential e rinominarlo è pericoloso, usare --no-renamefatto
+retrocessione di %.250s dalla versione %.250s alla %.250sdpkg non è stato registrato come installato, impossibile controllare il supporto per %s.
+trigger del pacchetto in attesa "%.250s" duplicatofile del trigger di interesse duplicato per il nome file "%.250s" e il pacchetto "%.250s"percorso %s duplicatotrigger imminente "%.255s" duplicatocollegamento slave %s duplicatonome slave %s duplicatovalore duplicato per il campo "%s"valore duplicato per il campo definito dall'utente "%.*s"campo nome vuotofgets ha restituito una stringa vuota leggendo i file di configurazionenomi di trigger nulli non sono permessifine del file dopo il nome del campo "%.*s"fine del file prima del valore per il campo "%.*s" (newline finale mancante)fine del file nel valore del campo "%.*s" (newline finale mancante)fine file da stdin al prompt per il file di configurazioneepochil valore epoch nella versione è vuotoil valore epoch nella versione è negativoil valore epoch nella versione non è un numeroil valore epoch nella versione è troppo grandeerroreerrore nel controllare "%s"errore nel chiudere %.250serrore nel chiudere il file di configurazione "%.255s"errore nello scrivere/chiudere "%.255s"errore nel creare il device "%.255s"errore nel creare la directory "%.255s"errore nel creare il collegamento fisico "%.255s"errore nel creare il nuvo file di backup "%s"errore nel creare la pipe "%.255s"errore nel creare il collegamento simbolico "%.255s"impossibile assicurarsi che "%.250s" non esistaerrore nell'eseguire l'hook "%s", codice d'uscita %derrore nel formattare la stringa in una variabile varbuferrore nel formato di visualizzazione: %serrore nell'installare il file nuovo "%s"errore nell'aprire il file contenente i file di configurazioneerrore nell'aprire la directory di configurazione "%s"errore nell'elaborare l'archivio %s (--%s):
+ %serrore nell'elaborare il pacchetto %s (--%s):
+ %serrore nel leggere %.250serrore nel leggere %s dal file %.255serrore nel leggere il file contenente i file di configurazioneerrore nel leggere dalla pipe dpkg-deberrore nel leggere il file dei trigger rinviati "%.250s"errore nel rimuovere il vecchio file di backup "%s"errore nell'impostare il proprietario di "%.255s"errore nell'impostare il proprietario del collegamento simbolico "%.255s"errore nell'impostare i permessi di "%.255s"errore nell'impostare l'orario di "%.255s"errore nel cercare di aprire %.250serrore nel ripristino del segnale %s: %s
+errore durante la puliziaerrore durante la scrittura di "%s"errore nello scrivere "%s"errore nello scrivere su "%s"errore nello scrivere sulla lista dell'architetturaerrore di scrittura sullo stderr verificatosi prima del prompt per il file di configurazioneallocazione della memoria non riuscitaimpossibile allocare memoria per un nuovo elemento nella lista dei pacchetti con errore: %sesecuzione di chdir a "%.255s" non riuscitaesecuzione di chdir sulla directory non riuscitaesecuzione di chroot a "%.250s" non riuscitachiusura dopo una lettura di "%.255s" non riuscitacreazione di una directory non riuscitacreazione della pipe non riuscitaesecuzione di dup per fd %d non riuscitaesecuzione di dup per std%s non riuscitaesecuzione di fstat sul file componente ar non riuscita (%s)esecuzione di fstat sull'archivio non riuscitaesecuzione di fstat sul file con le deviazioni non riuscitaesecuzione di fstat sul file statoverride non riuscitacreazione di un file temporaneo non riuscita (%s)apertura del file di configurazione "%.255s" per la lettura non riuscita: %sapertura del file con le deviazioni non riuscitaapertura del file di informazioni sui pacchetti "%.255s" in lettura non riuscitaapertura del file statoverride non riuscitaapertura del file "%.250s" con l'elenco dei trigger di interesse non riuscitalettura non riuscitalettura di "%.255s" (in "%.255s") non riuscitalettura dell'archivio "%.255s" non riuscitarimozione del file di update incorporato %.255s non riuscitaimpossibile rimuovere questo stesso file di update %.255sesecuzione di rewind sul file temporaneo non riuscita (%s)impossibile tornare all'inizio del file dei trigger di interesse "%.250s"spostamento non riuscitoesecuzione di stat (dereference) sul collegamento simbolico esistente "%.250s" non riuscitaesecuzione di stat (dereference) sul nuovo collegamento simbolico proposto "%.250s" per "%.250s" non riuscitaesecuzione di fstat sul file temporaneo non riuscita (%s)rimozione del file temporaneo non riuscita (%s), %sscrittura non riuscitascrittura del record %s del database, relativo a "%.50s" in "%.250s", non riuscitascrittura dei dettagli di "%.50s" in "%.250s" non riuscitascrittura del nome del file sulla pipe di tar non riuscita (%s)fgets ha restituito una stringa vuota da "%.250s"il campo nome "%.*s" non può iniziare con un trattinoil nome del campo "%.*s" deve essere seguito dai due puntilarghezza del campo oltre l'intervalloil file "%.250s" ha un formato di versione non valido: %sil file "%.250s" è danneggiato - manca %.250sil file "%.250s" è danneggiato - checksum MD5 "%.250s" erratoil file "%.250s" è danneggiato - numero magico dell'intestazione dell'archivio erratoil file "%.250s" è danneggiato - numero della porzione dell'archivio erratoil file "%.250s" è danneggiato - numero errato (codice %d) in %sil file "%.250s" è danneggiato - codice di controllo errato alla fine della prima intestazioneil file "%.250s" è danneggiato - codice di controllo errato alla fine della seconda intestazioneil file "%.250s" è danneggiato - numero di porzioni dell'archivio erratoil file "%.250s" è danneggiato - carattere di riempimento errato (codice %d)il file "%.250s" è rovinato - manca il newline dopo %.250sil file "%.250s" è danneggiato - non ci sono slash ("/") tra i numeri della porzione dell'archivioil file "%.250s" è rovinato - caratteri nulli nella sezione infoil file "%.250s" è danneggiato - il secondo componente non è un componente datiil file "%.250s" è danneggiato - dimensione errata per il numero di porzione "quotato"il file "%.250s" è danneggiato - troppo cortoil file "%.250s" è danneggiato - numero di porzioni errato per le dimensioni "quotate"la versione del file "%.250s" è %d.%d: installare una versione più recente di dpkg-splitil file "%.250s" non è un archivio binario nel formato Debian (provare dpkg-split?)il file "%.250s" non è una porzione di archivioil file "%s" è danneggiato - intero fuori intervallo in %sil file "%s" non è una porzione di archivio
+formato del file non riconosciutoil file sembra essere un archivio danneggiato
+per essere stato scaricato in modalità ASCIIil file non può contenere newlineil record nel file dei trigger indica un nome di pacchetto "%.250s" non valido (per l'interesse nel file "%.250s"): %.250sil nome di file "%s" non è assolutoi file "%.250s" e "%.250s" non sono porzioni dello stesso fileil file con l'elenco dei file del pacchetto "%.250s" contiene un nome file vuotoal file con l'elenco dei file del pacchetto "%.250s" manca il newline finalefile con l'elenco dei file del pacchetto "%.250s" mancante, il pacchetto viene considerato senza alcun file attualmente installatoviene forzata l'installazione dell'alternativa %s poiché il gruppo %s è danneggiatofork non riuscitaversione del formato seguita da dati non leggibiliversione del formato senza puntonumero di versione del formatoversione del formato con componente major vuotoversione del formato con componente minor vuotoversione del formato con componente major troppo grandeversione del formato con componente minor troppo grandetrovati pacchetti sconosciuti: ciò potrebbe indicare che il
+database dei pacchetti non è aggiornato e deve essere eseguito
+l'aggiornamento con un metodo a interfaccia grafica. Per 
+maggiori informazioni: https://wiki.debian.org/Teams/Dpkg/FAQgenerata intestazione ar danneggiata per "%s"il gruppo "%s" non esistel'intestazione è troppo lunga, porzioni troppo lunghe; il nome o la versione
+del pacchetto è troppo lungo; non si continua%d avviso relativo ai file di controllo viene ignorato%d avvisi relativi ai file di controllo vengono ignoratidanneggiamenti ignorati, è possibile procedere ugualmente.conflitti ignorati, è possibile procedere ugualmente.ignorati i problemi di dipendenze con %s:
+%svengono ignorati i problemi con le pre-dipendenze.viene ignorata la richiesta di rimuovere %.250s poiché non è installatoviene ignorata la richiesta di rimuovere %.250s, solo i file
+di configurazione sono presenti nel sistema: usare --purge per rimuoverlinome di architettura non valido nello specificatore "%s:%s": %snome del pacchetto atteso "%.250s" non valido: %.250snome di pacchetto non valido alla riga %d: %.250snome di pacchetto non valido nel trigger in attesa "%.255s": %snome di pacchetto non valido nello specificatore "%s%s%s": %snome del trigger imminente "%.255s" non valido: %sformato (%d) del database di informazioni è errato o troppo recente, provare con una versione aggiornata di dpkgfile d'informazioni %s/%s non associato ad alcun pacchettol'installazione di %.250sinstallatoinstallato pacchetto %s script %sl'installazione di %.250s potrebbe danneggiare %.250s e
+ la deconfigurazione non è consentita (--auto-deconfigure potrebbe essere utile)l'installazione di %.250s potrebbe danneggiare il software esistenteerrore internoerrore interno (bug)carattere "%1$c" non valido nella dimensione "%3$.16s" del componente "%2$.250s"carattere "%c" non valido nella larghezza del campocarattere non valido nel numero di revisionecarattere non valido nel numero di versionelivello di compressione per -%c non valido: "%ld"parametri di compressione non validi: %sversione formato deb non valida: %snumero intero per -%c non valido: "%.250s"numero intero per --%s non valido: "%.250s"sintassi non valida o sconosciuta nel nome del trigger "%.250s" (nel trigger di interesse per il pacchetto "%.250s")nome di pacchetto "%.250s" non valido nel file dei trigger rinviati "%.250s"gid statoverride %s non validomodalità statoverride %s non validauid statoverride %s non validostato non validonome del trigger "%.250s" non valido: %.250sriga non terminata durante il tentativo di leggere %sriga troppo lunga o non terminata durante il tentativo di leggere %sil collegamento %s è sia primario che slavecaricamento file di controllo "%s" per il pacchetto "%s"caricamento elenco file per il pacchetto "%s"deviazione locale da: %s
+deviazione locale di %sdeviazione locale di %s in %sdeviazione locale in: %s
+diverge localmente in: %s
+nomi di file lunghilo script "%.50s" del responsabile ha dei permessi errati %03lo (devono essere >=0555 e <=0775)lo script "%.50s" del responsabile non è un file normale o un collegamento simbolicoimpossibile eseguire stat sullo script "%.50s" del responsabilemalloc non riuscita (%zu byte)modalità manualefile mastercollegamento masterla rimozione di %s potrebbe causare dei problemi poiché fornisce %s...non può essere una stringa vuotaraggiunto il limite di utilizzo memoriacorrispondenza errata su divert-to
+  nel rimuovere "%s"
+  trovato "%s"corrispondenza errata sul pacchetto
+  nel rimuovere "%s"
+  trovato "%s"parentesi di chiusura mancantesono presenti istanze non co-installabili e co-installabili del pacchetto, molto probabilmente a causa di un aggiornamento da un dpkg non ufficialemulti-archConflicts e Replaces multiplisono presenti molteplici istanze non co-installabili del pacchetto, molto probabilmente a causa di un aggiornamento da un dpkg non ufficialepresenti molteplici statoverride per il file "%.250s"deve essere invocato da uno script del responsabile (oppure con un'opzione --by-package)deve iniziare con un carattere alfanumericodeve iniziare con un carattere alfanumericoil nome %s è sia primario che slavenecessaria un'opzione che indichi un'azionenuovo pacchetto %s script %snewline nel nome del campo "%.*s"newline non consentito nel nome dell'oggetto dell'archivio "%.250s"newline non consentito nel nome del percorso "%s"newline proibite nei file update-alternatives (%s)nessun file "control" nell'archivio di controllo.nessuna alternativa per %snessun override presentenessuna informazione sul pacchetto in "%.255s"nessun pacchetto chiamato "%s" installato, impossibile eseguire la configurazionenessun pacchetto corrispondente a %snessun percorso corrispondente a %s%s è essenziale e non verrà de-configurato
+ per poter abilitare %simpossibile procedere con %s (provare con --auto-deconfigure):
+%snon viene eseguita la verifica dei contenuti dell'area di controlloprivilegi non sufficienti per cambiare directory di root con --force-not-root, usare --force-script-chrootless.non installatonon installato ma configurazione presente%s non viene rimosso in quanto non è un collegamento simbolico%s non viene sostituito con un collegamentonon è presente nulla dopo i due punti nel numero di versionenome di pacchetto nullo nell'elenco separato da virgole "%2$.250s" di --%1$snumero di porzioni dell'archivioopzione "--%s" obsoleta, i pacchetti non disponibili vengono puliti automaticamentetipo di compressione "%s" obsoleto: utilizzare xztipo di compressione "%s" obsoleto: utilizzare xz o gzipopzione force/refuse "%s" obsoletaopzione "--%s" obsoletavecchio pacchetto %s script %sil vecchio file di configurazione "%.250s" era una directory vuota (ora è stata eliminata)il vecchio file "%.250s" è lo stesso di molti nuovi file (sia "%.250s" che "%.250s")la vecchia versione del pacchetto ha un file di configurazione troppo lungo che inizia per "%.250s"solo le versioni esatte possono essere usate per il campo "%s"apertura del componente "%.255s" (in %.255s) non riuscita in modo inattesomemoria esaurita per la nuova voce di cleanupmemoria esaurita per la nuova voce di cleanup con molti argomentimemoria esaurita per il nuovo contesto di errorecontesto di errore esterno, uscitaviene ignorato il problema poiché è usata l'opzione --force:il pacchetto %.250s è già installato e configuratoil pacchetto %.250s non è pronto per la configurazione
+ impossibile configurarlo (stato corrente "%.250s")il pacchetto %.250s non è pronto per l'elaborazione dei trigger
+ (stato attuale "%.250s" con nessun trigger in attesa)il pacchetto %s %s non può essere configurato perché %s ha una versione diversa (%s)impossibile configurare %s poiché %s non è pronto (lo stato attuale è "%s")il pacchetto %s conteneva un elenco come file di informazioniil pacchetto %s richiede di essere reinstallato, ma verrà comunque rimossoil pacchetto %s richiede di essere reinstallato, non verrà rimossoil pacchetto %s era bloccato, viene elaborato comunqueil pacchetto "%s" non è disponibileil pacchetto "%s" non è installatoil pacchetto "%s" non è installato e non è disponibile alcuna informazionearchitettura pacchettol'architettura del pacchetto (%s) non corrisponde a quella del sistema (%s)l'architettura del pacchetto è vuota o mancanteil pacchetto contiene un nome troppo lungo per il file con le informazioni di controllo (inizia per "%.50s")le informazioni di controllo del pacchetto contenevano la directory "%.250s"la rimozione (rmdir) di "%.250s" nelle informazioni di controllo del pacchetto non indicavano una directoryestrazione informazioni di controllo del pacchettoil pacchetto ne diverge altri in: %s
+estrazione campo valore del pacchettofile checksum MD5 del pacchettoestrazione file system del pacchettolo stato del pacchetto è %s, ma sono attesi dei triggerlo stato del pacchetto è %s, ma dei trigger sono imminentiil pacchetto si trova in uno stato di inconsistenza grave:
+ è necessario installarlo nuovamente prima di rimuoverloil pacchetto si trova in uno stato di inconsistenza critico: è consigliato
+ installarlo nuovamente prima di tentare la configurazione.pacchetto non può contenere newlinenome pacchettoil nome del pacchetto "%s" non è valido: %sil nome del pacchetto contiene caratteri che non sono né alfanumerici minuscoli né "-+."pacchetto non presente nel database di stato né di disponibilità alla riga %d: %.250sverifica firma del pacchettonumero di versione del pacchettopager per mostrare filemanca la porzione %dil file della porzione "%.250s" non è un file normalela dimensione della porzione è troppo grande oppure negativala dimensione della porzione deve essere di almeno %d KiB (per contenere l'intestazione)superata
+pasteil percorso non può contenere newlinespecificare --no-rename esplicitamente, il comportamento predefinito cambierà in --rename dalla versione 1.20.xproblema con le pre-dipendenze - %.250s non viene installatoprioritàla priorità è fuori intervallola priorità deve essere un numero interola priorità di %s è fuori intervallo: %spriorità di %s: %serrore di lettura in %.250serrore di lettura in "%.250s"errore nel leggere il file di configurazione "%.255s"errore di lettura sullo standard inputerrore di lettura da stdin al prompt per il file di configurazionelettura file informazioni "%.255s" del pacchettolettura file informazioni "%s" del pacchetto: %slettura file statoverride "%.250s"file pacchetto riassemblatoproblemi con le pre-dipendenze di %s contenente %s:
+%sinformazioni su %s che contiene %s:
+%sla rimozione di %.250srimozione dell'architettura "%s" attualmente in uso dal databaserimozione delle alternative selezionate manualmente - viene attivata la modalità automatica per %sla rinomina comprende il sovrascrivere "%s" con
+   il file "%s", non consentitorename: rimozione vecchio collegamento duplicato "%s"l'operazione richiesta necessita dei privilegi di super-utenteil numero di revisione è vuotocomando rm per la puliziaricerca completata senza trovare alcun pacchetto (file *.deb)<sconosciuta>impostazione selezione automatica di %strovate molteplici descrizioni del pacchetto, ne è consentita solo unacomando shell per spostare fileviene mostrato l'elenco pacchetti sul pagersaltata la creazione di %s poiché il file %s associato (del gruppo %s) non esistefile slavecollegamento slavecollegamento slave identico a quello main %snome slaveil file sorgente "%.250s" non è un file normaleriassemblaggio pacchetto divisoil file statoverride contiene una riga vuotail file statoverride non contiene il newline finalestatologger di statovengono tolti gli / in codail sottoprocesso %s ha restituito lo stato di errore %dla dimensione del collegamento simbolico "%.250s" è cambiata da %jd a %zderrore di sintassi nel file dei trigger "%.250s"errore di sintassi nel file statoverrideerrore di sintassi nel file dei trigger rinviati "%.250s" alla riga %d carattere %zd "%s"accetta un solo argomento, il nome del triggerla destinazione è una directory - impossibile saltare la verifica del file di controlloci sono diverse versioni della porzione %d - almeno "%.250s" e "%.250s"non c'è alcuno script nella nuova versione del pacchetto - saltatoquesto è un pacchetto essenziale, non dovrebbe essere rimossoper ripristinare gli aggiornamenti automatici usare "%s --auto %s"troppi errori, chiusura in corsotroppi errori correlati durante la gestione dell'erroreriga troppo lunga o newline mancante in "%.250s"la directory di partenza %s non è una directoryerrore di sintassi nel file dei trigger di interesse "%.250s", non di pacchetto "%250s" non valido: %.250sil nome del trigger "%s" non è valido: %sil nome del trigger contiene caratteri non validii record del trigger non esistono ancoratriggeredil file dei trigger "ci" "%.250s" contiene una sintassi non valida nel nome del trigger "%.250s": %.250sil file dei trigger "ci" contiene una direttiva "%.250s" sconosciutail file dei trigger "ci" contiene una sintassi sconosciuta%la directory dei dati dei trigger non è stata ancora creataciclo nei trigger, abbandonoviene provato lo script dal nuovo pacchetto...tentata sovrascrittura di "%.250s" presente anche nel pacchetto %.250s %.250stentata sovrascrittura di "%.250s", la versione divergente di "%.250s"tentata sovrascrittura di "%.250s", la versione divergente di "%.250s" (pacchetto: %.100s)tentata sovrascrittura della directory "%.250s" nel pacchetto %.250s %.250s con un oggetto non-directorytentata sovrascrittura di "%.250s" (condiviso), diverso da altre istanze del pacchetto %.250sspecificati due comandi: --%s e --%simpossibile (ri)aprire in lettura il file della porzione di archivio "%.250s"impossibile modificare il proprietario del file "%.250s"impossibile verificare l'esistenza di "%.250s"impossibile verificare lo stato di blocco del file "%s"impossibile verificare l'esistenza dell'archivio "%.250s"impossibile impostare il proprietario del collegamento simbolico alla copia di backup di "%.255s"impossibile risolvere i problemi con "%.255s" prima di installarne un'altra versioneimpossibile chiudere il file "%s"impossibile chiudere il file nuovo "%.250s"impossibile chiudere il nuovo file dei trigger rinviati "%.250s"impossibile chiudere lo stato aggiornato di "%.250s"impossibile creare "%.255s"impossibile creare "%.255s" (durante l'elaborazione di "%.255s")impossibile creare il file "%s"impossibile creare il file nuovo "%.250s"impossibile creare una directory temporaneaimpossibile creare la directory di stato dei trigger "%.250s"impossibile eliminare il file con le informazioni di controllo "%.250s"impossibile eliminare la vecchia directory "%.250s": %simpossibile eliminare il file di deposito utilizzato "%.250s"impossibile eliminare "%.250s"impossibile eseguire %s (%s)impossibile completare il riempimento di %.250simpossibile eseguire il flush di %.250s dopo il riempimentoimpossibile eseguire il flush del file "%s"impossibile eseguire il flush del file nuovo "%.250s"impossibile eseguire flush dello stato aggiornato di "%.250s"impossibile eseguire fstat sul file sorgenteimpossibile eseguire fsync per lo stato aggiornato di "%.250s"impossibile ottenere il descrittore del file per la directory "%s"impossibile ignorare il segnale %s prima di eseguire %.250simpossibile installare "%.250s" come "%.250s"impossibile installare il (supposto) nuovo file di informazioni "%.250s"impossibile installare il nuovo file di informazioni "%.250s" come "%.250s"impossibile installare il nuovo file dei trigger rinviati "%.255s"impossibile installare la nuova versione di "%.255s"impossibile installare lo stato aggiornato di "%.250s"impossibile bloccare %simpossibile creare il collegamento alla copia di backup di "%.255s" prima di installarne la nuova versioneimpossibile creare il collegamento simbolico alla copia di backup di "%.255s"impossibile spostare "%.255s" per installarne la nuova versioneimpossibile aprire "%.255s"impossibile aprire la directory "%s"impossibile aprire il file "%s"impossibile aprire il nuovo file di deposito "%.250s"impossibile aprire il file di output "%.250s"impossibile aprire il file sorgente "%.250s"impossibile aprire la directory di controllo temporaneaimpossibile aprire il file dei trigger "ci" "%.250s"impossibile aprire il file dei trigger rinviati "%.250s"impossibile aprire/creare il nuovo file dei trigger rinviati "%.250s"impossibile leggere l'orario "%.255s"impossibile leggere la directory di deposito "%.250s"impossibile leggere il file dei trigger "%.250s"impossibile leggere i flag del descrittore di file per %.250simpossibile leggere il collegamento "%.255s"impossibile leggere la porzione "%.250s"impossibile rimuovere "%s"impossibile rimuovere la copia di backup di "%.250s"impossibile rimuovere la copia del file sorgente "%s"impossibile rimuovere la versione appena estratta di "%.250s"impossibile rimuovere la versione appena installata di "%.250s"impossibile rimuovere la versione appena installata di "%.250s" per consentire la reinstallazione della copia di backupimpossibile rimuovere il file di informazioni obsoleto "%.250s"impossibile rinominare il nuovo file di deposito "%.250s" in "%.250s"impossibile riaprire la porzione "%.250s"impossibile ripristinare la copia di backup di "%.250s"impossibile rimuovere in sicurezza "%.250s"impossibile rimuovere in sicurezza "%.255s"impossibile rimuovere in sicurezza il vecchio file "%.250s": %simpossibile spostarsi all'inizio di %.250s dopo il riempimentoimpossibile impostare la bufferizzazione sul file %s del databaseimpossibile impostare il flag close-on-exec per %.250simpossibile impostare i permessi di esecuzione su "%.250s"impossibile impostare la modalità del file "%.250s"impossibile eseguire setenv per lo script del responsabileimpossibile eseguire setenv per il sottoprocessoimpossibile eseguire stat su %s "%.250s"impossibile eseguire stat su %s "%.250s": %simpossibile eseguire stat su "%.250s"impossibile eseguire stat sulla directory di controlloimpossibile eseguire stat sul file di configurazione "%.250s" attualmente installatoimpossibile eseguire stat sul nuovo file di configurazione distribuito "%.250s"impossibile eseguire stat sull'altro file nuovo "%.250s"impossibile eseguire stat su "%.255s" appena ripristinato prima di installarne un'altra versioneimpossibile eseguire stat sul file sorgente "%.250s"impossibile eseguire stat sul file dei trigger rinviati "%.250s"impossibile sincronizzare la directory "%s"impossibile sincronizzare il file "%.255s"impossibile sincronizzare il file "%s"impossibile sincronizzare il file nuovo "%.250s"impossibile eseguire truncate per lo stato aggiornato di "%.250s"impossibile sbloccare %simpossibile scrivere il file "%s"impossibile scrivere il file nuovo "%.250s"impossibile scrivere il nuovo file dei trigger rinviati "%.250s"impossibile scrivere sul file di stato %dimpossibile scrivere lo stato aggiornato di "%.250s"virgolette non bilanciate in "%s"errore inatteso di bzip2dati inaspettati dopo il pacchetto e la selezione alla riga %dfine file inatteso dopo il nome del pacchetto alla riga %dfine file inattesa prima della fine della riga %dfine del file inattesa in %s nel file %.255sfine file inatteso nel nome del pacchetto alla riga %dfine del file o dello stream inattesafine del file inattesa leggendo "%.250s"fine del file inattesa durante il tentativo di leggere %sfile dell'input inattesafine riga inatteso dopo il nome del pacchetto alla riga %dfine riga inattesa nel nome del pacchetto alla riga %dEOL inatteso nel file statoverridepercorse pre-esistente %s inattesoargomento "%s" sconosciutostrategia di compressione non riconosciutastrategia di compressione "%s" sconosciutatipo di compressione "%s" sconosciutoversione formato deb sconosciuta: %sopzione force/refuse "%.*s" sconosciutaopzione "%s" sconosciutaopzione -%c sconosciutaopzione --%s sconosciutaformato di verifica output "%s" sconosciutostato desiderato sconosciuto alla riga %d: %.250sestratto ma non configuratoerrore fatale non recuperabile, uscitapreset di compressione non supportatotipo di compressione "%s" non supportato con compressione uniformeopzioni non supportate nell'header del filetipo di controllo integrità non supportatola directory updates contiene il file "%.250s" il cui nome è troppo lungo (lungh=%d, max=%d)la directory updates contiene file con nomi di diversa lunghezza (sia %d che %d)viene aggiornata l'alternativa %s perché il gruppo di collegamento %s ha modificato i collegamenti slavel'utente "%s" non esisteil nome del campo definito dall'utente "%.*s" è troppo cortoviene usato %s per fornire %s (%s) in modalità automaticaviene usato %s per fornire %s (%s) in modalità manualeil valore per "%s" contiene una riga con un formato errato "%.*s"valore per il campo "%s" non consentito in questo contestoverifica del pacchetto %s non riuscita.verifica del pacchetto %s non riuscita, ma viene installato lo stesso come richiesto<nessuna>versione %.250s di %.250s già installata, ignoratasintassi della versione "%s" erratasintassi della versione "%s" errata: %sil numero di versione non inizia con una cifrail numero di versione è vuotola stringa di versione presenta degli spazila stringa di versione è vuotaProvides con numero di versionewait del sottoprocesso %s non riuscitawait del sottoprocesso %s non riuscitaattenzionedurante la lettura di %s: %snel rimuovere %.250s, la directory "%.250s" è risultata non vuota e non viene rimossanel rimuovere %.250s non è stato possibile rimuovere la directory "%.250s": %s - è un punto di mount?il pacchetto %.250s non verrà retrocesso dalla versione %.250s alla %.250s, ignorato%s viene de-configurato (danneggiato da %s)il pacchetto %s verrà rimosso al posto di %sè necessario specificare i pacchetti con il loro nome, non riportando il nome dei file che li contengono
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/ja.gmo dpkg-1.20.7.1/po/ja.gmo
--- dpkg-1.20.7.1-orig/po/ja.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/ja.gmo	2021-06-09 18:25:15.050503575 -0500
@@ -0,0 +1,704 @@
+���t�<Q?QaQQk�Q�R��R&hS=�S&�S�S-U.6UeU.vU�U �U4�UV53V-iV.�V0�V1�V$)W4NW/�W�Wq�W(=X$fX�X�X:�X6Y1=Y1oY!�Y2�Y(�YZ/Z!IZkZ�Z�Z�Z.�Z�ZS�ZP[a[�[9�[m�[)@\:j\9�\.�\']&6]]]3s]5�]�]�]v�][g^U�^_._?_L_a_Zp_�_�_��_=�`�`
+aa�*a=cRDc1�cD�cLdA[d'�d&�d(�d'e+=e4ie!�e,�e9�e-'fUf#sf�f$�f�f"�fg!9g#[gg�g�g�g�g"�g2h1Fh/xh�h.�h�h-	iR7iH�iQ�iA%jegjf�jI4k7~k<�k�k(lB/lrl�l�l
�l �l�l5�l15m@gm0�m�m�m#n!(nJngnK�n7�n5o->olo!�o�o'�o-�o-p Fp5gp�p �p�p$�p,q.Hq.wq.�q�qH�q6>r(ur>�r$�r s#sBsIsUs�mst#t#:t:^t-�u�u�u�u�u*v<3v#pv-�v-�v��v�w�w��w[�x��xg�|
^~l��(��-ƀ�8�<I�.����0́3��11�c�p������1L�*~�J��2��'�&̅2�E&�Vl�Æ5܆.�-A�+o�/��
ˇ%ه/��*/�&Z�!��+��Bψ]�p�!u�M���2���.��ڋ"r���4��.�5�3N���G��8ڎ,�@�(_�������G���3�)@�$j�:��,ʐV�� N�o�*����̑&ۑ3�-6�+d�,��	��ǒݒ*�� �6� S�Ht����ē���gH�j�������4ė5���/�����un�&�A�{M�!ɛ,�*�.C�r������ ��5��� �,(�$U�.z�>��*�;�,O��|��/��u��h�"A�d�p�|�9��(ãX�3E�?y�8��2�1%�,W�:��4��5��4*�A_�M��-��1�#K�o������� ̧1��8�?X�B��6ۨ�&.�.U�!��!��5ȩ���1�F�Z�o�	��9��.ƪ#��,�F�e�%����%ʫ-�1�P�f�)��1��:�?�&\���=��7ޭ�!0�.R�*��#��"Ю&�0�:K�����@��+��;%�3a�����AͰ�&.�-U�0��;��0�(!�?J�)��-��"��4�EP�����,ȳ"��!�:�5Y� ��8�����-�5E�,{�B��B�+.�GZ�$�� Ƕ:�;#�_�x�&����7ʷ�D �ce�ɸ2ո*�"3�3V�:��-Ź&��4�L�b�"~�����(��=�*%�JP���"��л��-�M�)^�%��#��@Ҽ@�'T�|�������ڽ���)	�3�R�!q�!��#��پ%��%�'B�,j�����Ͽ*�'�'?�g�!|��� ��-��#
+�#.�+R�%~�$���� ����2�"H�:k���F���#�@�$]���������#����!?�"a�:����5�� �25�h�%w���0��*��$�/>�n�6}�V��"�(.�W�<g�.��)��(��*&�+Q�}�,��)��4��3%�2Y�4��;��<��6:�:q�7��@��0%�;V�?��$��A��=9�$w�0��!����b
+�m�c����:
�<H�=��_��H#�l�x�����)��)��$�A��[�\��&<�&c�'�� ��7��t�2��-��'��4	�.>�)m�G��-��
�	$�k.�/����>��%�$D�#i�&��!����"��^�@w�������
�%�+B�7n�!���������,�E�OT�8��*���"�.�:�3F�z���7��5���|1�
+����m��0G�Gx���)��!
+�,�B�3_�$��5�����"�4<�q�!��C��=��%3�
Y� g�(����%��7��,�ID�!����G��P�G`�.��?��#�7;�#s�+��2��Y��fP�L��M�&R�Ky�3��=��7�U�=s���4��F��1B�;t�&�������%/�.U�.��a��e� {���D����
�$�&7�-^�7��������.���(�A�"]�������)����&�"-�"P�"s���6�����7�BO�H��&��0�3�6J���$��4����O	�
+Y�
+d�o�
+��%����%��*��*�
1�?�+T�7��+��!��$�4+�F`�@��6��1�Q�,k�R��'��$�	8�ZB�4��2��'�-�.I�Dx�G��Y�Q_�^��%�+6�2b�%��%��1��+�N?���!��3��*��)�5C�y�"��$��2��+�+;�,g�����"��$���!+�*M�x�*��0��0��&!�3H�4|�5��)��,�>�DP�*��4����
�+�&D�#k�#��%��(��.�91�'k�*��.����!
+�,�(B�(k�4��4��[��,Z�4��#��,��"
�"0�/S�/��+��+��-*9&d!���� �2 0S&�B�#�.A_| �1���!38l*���6�4,T&�1� �'�.#R4j1�+��"0Sr"����!�(:V:u"�#�S�MKE��(�(!	*J	.u	0�	"�	I�	B
+4Q
+�
+(�
+"�
+�
+7?BT`�9�'2#Z`~��C{���e!/�QN:]�1�hA�Y�Z97�:�f4nI�N�B<E[�C!ceZ�%$�J@�=IO@�\�_7e�b�;`_�7�45Q;�#�-�51K}:��(�"
+s-��Bk s� E"!9h!?�!9�!"P<"V�"�")�"r#]�#H�#.$K$]$)w$�$u�$'4%(\%��%cr&1�&*'(3'y\'{�)�R*Y�*M3+h�+\�+=G,<�,=�,<-E=-?�-/�-H�-H<.K�.&�.,�.&%/,L/%y/+�/%�/)�/+0G0f0}0�0)�0<�0W"1Kz1U�1 2>=2|2?�2��2�s3�4V�4��4��5e6Q�6K�6#7M>7Q�73�7)8<8*T8+8(�8B�8J9]b9P�9!:*3:;^:<�:0�:#;�,;i�;b!<J�<&�<,�<)#=/M=G}=H�=8>VG>)�>/�> �>;?CU?D�?I�?>(@%g@d�@W�@;JA_�A?�A+&BRBiBpB�B��B]CfC7�C��C5kE�E�E�E�E?�Eb0FK�FE�FB%G�hGQH gHo�H��I�J��OnMQH�RT)THHT+�Tu�TU3UM�U �UR�UGKVF�V�V�V
W3W/HX,xXn�X_Y9tY�[O�[}\:�\3�\Q
+]N\]T�]3^M4^�^'�^L�^3
_<A_'~_>�_]�_xC`�`@�`cahaZ�a6�a�d*�e3%f]Yf]�fQgqgg#�g��gV�hA�h;"iT^i�i�i/�i{j	�j]�jB�j1-kI_k:�kF�k8+l'dl<�l%�l�l?mkNmU�mMnD^n	�n3�n%�n0o(8o4ao8�o=�o
pp1q�Gr��r�s%�tM�uAvSv�ew*YxO�y6�yZz�fz>{B]{<�{9�{6|N|�d~Ri_$�8�U'�6}�f��k�[��y�[]����"�����ĄN��+҆���&�e>�A����Tn�gÈ[+�S��SۉM/�b}�g��DH�d��d�lW�BČ�% �3F�/z�������.K�j=�s��h�U��6ۏF�KY�6��*ܐw�3�'��!ۑ*��(�!G�i�Wy�Kђ)�EG�-��:��C��5:�Lp�F��I�N�-l�B��JݕZ(�]��=�-�XM�M��*��H�Lh�@��?��@6�Lw�?ęV�0[�!��Z��B	�YL�G��3�,"�_O�4��<�;!�f]�cĝZ(�E��rɞP<�H��C֟3�CN�]��$�(�C>�=��H��$	�?.�3n�Q�����<+�Vh�I��H	�fR�E����N�9Υm�dv�:ۦ�85�7n�Y��D�xE����J�B`�0��*ԩA��MA�C��EӪ$�$>�&c�5��0��*��G$��l�9�w)�"��$ĭ1�+�2G�Dz���;خ-�5B�\x�\կN2���1��:��1��	-�27�:j�O��I��C?�I��IͲZ�@r�R��?�QF�I��%�T�I]�Q��L��LF�:��XζI'�6q�X��W�*Y�[��-�6�:E�2��8��#�&�?7�uw�-����<��<�,'�=T�0��'ü7�$#�?H�H��SѽU%�5{�V��;�^D�=��U�!7�FY�=��G��G&�7n�R����g����;'�Bc�!��m��K6�9��=��P��JK�$��A��G��]E�a��^�ed�m��p8�^��_�Vh�y��R9�m��m��=h�m��t�F��E��@�6W�{��9
+��D�9��Y
�gg�^���.�w��b�$n�3����H��H,�3u�'�����C��@��=�7C�.{�S�����I��8�5;�Pq�D��(�{0�X���$��1�[��*�gC�9��6��6�5S�(��3��0��z�`��2��,&�/S���&��E��T�DU�'��(��1��'�-E�s���u	�E��������Y"�!|�'��O��U�$l����m�7�����Vd�{��07�9h�A��<��#!�UE�-��O��&�'@�3h�Z��9��=1�wo�S��E;�	��H��H��'�?E�Q������Bs�%��a��u>���M4�u��Q��rJ�K��6	�V@�����_��v�Oy�j��O4�R��<��E�cZ�$��T��~8�^��w�$��P��*�5/�?e�L��L���?����6W���f���$'�L�Ol�B��i��i�q�-~�=��	����0�%A�g�:{���4��E�KQ�F��F��>+�-j�V��8��(�Z9�p����J��B��+�pE���*��d��0O��=1oO!�7�C)mt'�M�\�OT:�1�ffxc�[CE�9�9tY6�*0v@[�WKk9�R�oD	d�	~
+��
+�2;�H�IB*�<�:�U/
d�
0�
=LYF�!�F*V7�0�F�F1>x:�!� (5>^3�@�IE\A�H�B-@pX�Y
+RdH�LMplT�d2'�6�0�C':k=�H�C-Cq[�LF^O�+�C!e?�?�HTL��:JJ�@�F*X*�A�8�T):~0�I�54,j-�1�*�E" dh I� L!gd!@�!F
"0T".�"*�"7�"F#$^#*�#7�#F�#7-$@e$)�$�$T�$WB%K�%N�%Q5&E�&<�&T
+''_'K�'E�'<(V(t($�($�(3�(>)M)%k)�),�)/�)*3%*KY*T�*B�*k=+Y�+w,${,>�,K�,T+-@�-V�-2.gK.�.m�.-*/<X/E�/!�/&�/4$0Y0`0ez0��0e�1U�1M=2��2k`Y^�������Ri.�z
+��@�-�p��������%A(�5����_�K�CRb��>r�/T��40^eF9����g��Y���3�-��l���G�Q���U���}?��Jy�'
�HaK� ��n��u/������"���m��2���}����0E���9�w�k�zg��Ly�3s��F�h/��>,)?����b��cC�o�W@Fv�Y�B*T[BS��
+�P����t��7��W�n�L~&[�:���s���������]�>�`��{H�0m��I�%�=+7����u���K����1�+�����2�j��'5,�Gq]`���|}�x# �Oj���~����U��o����AV��*h���.����<�h1?����nX!�BI����Adg�j��������x��J���u��R{��:�V
���)<���D�w:�P���1p����x8��W��)a#d��H�D���8���&��;�tS�$��P"����B�3:�	�	��6�����ZNm&=G�����6�<_��\�
2�$��.��VUk$��L%�,��<�;(Ca����f��
+��g\6Gq�_��9��1��sz
+!�������K�-M�D�rl.c��i�;��~�Z'E�XvfW+�[���t�M"o��P�c�-	��v�;o��m�8 ����H�4��3��Af���O*�p#�2��7�e}x=#b�|��\�XLd����?N��RE���Ok6j{*|�I�r�J���]���^(��Qb��iwt����,5(���w@��!>��M4��S~yJ����v�SY���Z����_�����OpI���
����s`4Vl��e{0 ��8X���+C�n���N5�z'l	�dQ]/"��9rc�Nh������!������aDMu��F\����f�$�@e^��T���[�q�iT7�U|%Q&�=)Z���Eyq
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s suggests %s%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenVersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open security status notification channelcannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentgenerated corrupt ar header for '%s'group '%s' does not existheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete force/refuse option '%s'obsolete option '--%s'old conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion number does not start with digitversion string has embedded spacesversion string is emptyversioned Provideswait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.18.3
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2016-04-01 16:07+0900
+Last-Translator: Takuma Yamada <tyamada@takumayamada.com>
+Language-Team: Japanese <debian-japanese@lists.debian.org>
+Language: ja
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=1; plural=0;
+X-Generator: Gtranslator 2.91.6
+
+ パッケージの保留トリガがおそらく解決不可能:
+
+設定ファイル `%s' がシステムに存在しません。
+あなたの要求に従って、新しい設定ファイルをインストールしています。
+
+デバッグオプションは、ビットごとの論理和を使って組み合わせることができます。
+意味や値は変更される可能性があることに注意してください。
+
+システムにパッケージのインストールや削除を行う場合は `dpkg' またはよりユーザ
+向けの `apt' または `aptitude' を使用してください。`dpkg-deb --extract'
+を使って展開されたパッケージは正しくインストールされません!
+
+警告: [!] と記されているオプションの使用は、あなたのシステムに深刻な傷害を与える
+可能性があります。[*] と記されているオプションの強制はデフォルトで有効です。
+     これはインストールされてから変更されていません。
+     パッケージ中のバージョンが前回のインストール時と同じです。
+     非プレーンファイル          %.255s
+   どうしますか? 以下の選択肢があります:
+    Y か I  : パッケージメンテナのバージョンをインストールする
+    N か O  : 現在インストールされている自分のバージョンを残す
+      D     : 両バージョンの差異を表示する
+      Z     : 状況を調査するためにシェルを開始する
+  %.250s (バージョン %.250s) が提供され、%s です。
+  %.250s (バージョン %.250s) がインストールされようとしています。
+  %.250s は %s です。
+  %.250s がインストールされていますが、バージョンが %.250s です。
+  %.250s はインストールされていません。
+  %.250s は設定が消されようとしています。
+  %.250s がインストールされようとしていますが、バージョンが %.250s です。
+  %.250s は削除されようとしています。
+  %.250s は展開されていますが、設定されていません。
+  %.250s は展開されていますが、バージョンが %.250s です。
+  %.250s の最新設定済みバージョンは %.250s です。
+  %2$.250s を提供する %1$.250s が提供され、%3$s です。
+  %2$.250s を提供する %1$.250s がインストールされようとしています。
+  %2$.250s を提供 (provides) する %1$.250s が %3$s です。
+  %.250s は %.250s を提供していますが、設定が削除されようとしています。
+  %.250s は %.250s を提供していますが、削除されようとしています。
+%s (%s) は %s を提供します。
+  -?, --help                          このヘルプを表示
+      --version                       バージョン番号を表示
+
+  パッケージ %s はトリガ処理を待っています。
+  パッケージ %s はまだ設定されていません。
+  パッケージ %s はまだインストールされていません。
+  パッケージ %s は削除されようとしています。
+  パッケージ %s は %s を提供しており、トリガ処理を待っています。
+  パッケージ %s は %s を提供していますが、まだ設定されていません。
+  パッケージ %s は %s を提供しますが、まだインストールされていません。
+  パッケージ %s は %s を提供していますが、削除されようとしています。
+  システム上の %s のバージョンは %s です。
+  %2$s によって提供されるシステム上の %1$s のバージョンは %3$s です。
+設定される %s のバージョン は %s です。
+  リンク %s は %s です  最適なリンクのバージョンは '%s' です  最適なリンクのバージョンは利用不能です  リンクは現在ありません  リンクは現在 %s を指しています  スレーブ %s は %s です  スレーブ %s: %s %7jd バイト、%5d 行   %c  %-20.127s %.127s
+ %2$s 中の %1$d:  %d パッケージは、(以下のセクションから): %s (%jd バイト)
+%s (%s) は %s を壊し、%s です。
+ %s (非プレーンファイル)
+ ==> これはインストールしてから (あなたかスクリプトによって) 削除されています。
+ ==> あなたかスクリプトによって設定ファイルが作成されています。
+ ==> パッケージメンテナが提供するパッケージにもこのファイルが存在します。
+ ==> デフォルトで古い設定ファイルを保持する。
+ ==> これはインストールしてから (あなたかスクリプトによって) 変更されています。
+ ==> パッケージ配布元が更新版を提供しています。
+ ==> 要求したように古いファイルを使う。
+ ==> デフォルトで新しい設定ファイルを使う。
+ ==> 要求したように新規ファイルを使う。
+ パッケージ %s: パート  デフォルトでは新しいバージョンをインストールします。
+ デフォルトでは現在使っている自分のバージョンを残します。
+ と  は以下に依存 (depends) します: %d 個の期待されるプログラムが PATH 上に見つからないか実行可能になっていません
+%s現在 %d 個のファイルとディレクトリがインストールされています。)
+%d 個の要求された control コンポーネントがありません%s (サブプロセス): %s
+%s - 優先度 %d%s は %s を壊します%s は %s と競合 (conflicts) します%s は壊れています: %s%s デバッグオプション, --debug=<8進数> または -D<8進数>:
+
+ 数値   ソースの参照箇所  説明
+%s は %s に依存 (depends) します%s は %s を強化 (enhances) します%s 強制オプション - 問題が発生したときの挙動を制御する:
+  警告するが継続:  --force-<事象>,<事象>,...
+  エラーで停止:    --refuse-<事象>,<事象>,... | --no-force-<事象>,...
+ 事象の強制:
+%s は正しくインストールされていません。すべての依存関係を無視します%s は %s に先行依存 (pre-depends) します%s は %s を推奨 (recommends) します%s は %s を提案 (suggests) します%s:
+    パート形式バージョン:                 %d.%d
+    パッケージのパート:                   %s
+        ... バージョン:                   %s
+        ... アーキテクチャ:               %s
+        ... MD5 チェックサム:             %s
+        ... 長さ:                         %jd バイト
+        ... 全分割:                       %jd バイト
+    パート番号:                           %d/%d
+    パート長:                             %jd バイト
+    パートオフセット:                     %jd バイト
+    パートファイルサイズ(portion で使用): %jd バイト
+
+%s: 設定ファイル '%.250s' がプレーンファイルでもシンボリックリンク (= '%s') でもありません%s: 設定ファイル '%.250s' はファイル名の重複を解決します
+ ('%s' は '%s' へのシンボリックリンクです)%s: 設定ファイル '%s' が自分自身へのリンクになっています
+ (= '%s')%s: 依存関係の問題、しかし要求どおり設定を行います:
+%s%s: 依存関係に問題があります。しかし要求に従いトリガを処理しています:
+%s%s: 依存関係に問題があります。しかし要求に従い削除しています:
+%s%s: bzip2 ストリームへの入力のバインドエラー%s: gzip ストリームへの入力のバインドエラー%s: bzip2 ストリームへの出力のバインドエラー%s: gzip ストリームへの出力のバインドエラー%s: '%.250s' から '%.250s' へのリンクに失敗しました: %s%s: '%.250s' の削除 (上書き前) に失敗しました: %s%s: '%.250s' の削除に失敗しました: %s%s: 古いバックアップ '%.250s' の削除に失敗しました: %s%s: 旧配布バージョン '%.250s' の削除に失敗しました: %s%s: '%.250s' から '%.250s' に名前を変更できませんでした: %s%s: 内部 bzip2 読み取りエラー%s: 内部 bzip2 読み取りエラー: '%s'%s: 内部 bzip2 書き込みエラー%s: 内部 bzip2 書き込みエラー: '%s'%s: 内部 gzip 読み取りエラー%s: 内部 gzip 読み取りエラー: '%s'%s: 内部 gzip 書き込みエラー%s: 内部 gzip 書き込みエラー: %s%s: 内部 gzip 書き込みエラー: '%s'%s: lzma クローズエラー%s: lzma エラー: %s%s: lzma 読み取りエラー%s: lzma 書き込みエラー%s: パススルーコピーエラー: %s%s: ハッシュ用に %s をオープンできません: %s%s: 設定ファイル '%s' のリンクの読み取りができません
+ (= `%s'): %s%s: 設定ファイル '%s' の状態を取得できません
+ (= `%s'): %s'%.255s' はコントロールコンポーネント '%.255s' を含んでいません`%s' が `%s' と衝突します'%s' がユーザ定義の優先度 '%s' を含んでいます'%s' は値をとりません`%s' フィールド、無効なパッケージ名 `%.255s': %s'%s' フィールド、アーキテクチャ名が存在しないか、アーキテクチャ名が入ると期待される場所にゴミがあります`%s' フィールド、パッケージ名が存在しないか、パッケージ名が入ると期待される場所にゴミがあります`%2$.255s' の `%1$s' フィールド:
+ `%3$c' は時代遅れです。代わりに `%4$c=' または `%5$c%6$c' を使ってください`%2$.255s' の `%1$s' フィールド:
+ バージョン関係 %3$c%4$c は不正です`%2$.255s' の `%1$s' フィールド:
+ バージョン番号が厳密に一致することが明示されていません。代わりに `=' を使うことを提案します`%2$.255s' の `%1$s' フィールド:
+ バージョン値が非英数字で始まっています。空白を加えることを提案します'%2$.255s' を参照する `%1$s' フィールド: 無効なアーキテクチャ名 '%3$.255s': %4$s`%2$.255s' の `%1$s' フィールド: バージョンが完結していません`%s' フィールド、パッケージ `%.255s' 参照後の構文エラー'%s' は値が必要です'%s' が PATH 上に見つからないか実行可能になっていません(%s は完全に置換されているため、消えていることに注意。)
+(データベースを読み込んでいます ... (説明 (description) がありません)(合計 %jd バイト)
+、コアダンプが作成されました-%c オプションは値をとりません-%c オプションは値が必要です--%s --pending はオプション以外の引数をとりません--%s --recursive には引数として最低 1 つのパスが必要です--%s は標準入力からの .deb の読み取りを (まだ) サポートしていません--%s は引数として .deb ファイル名とディレクトリが必要です--%s は <名前> が必要です--%s は <名前> <パス> が必要です--%s は引数として .deb ファイル名が必要です--%s は引数として <ディレクトリ> が必要です--%s は <ファイル> の引数が必要です--%s は引数が 1 つ必要です--%s は引数に対象となるディレクトリが必要です。
+おそらく、dpkg --install を使おうとしたのでしょう。--%s は有効なパッケージ名を必要としますが、`%.250s' はそうではありません: %s--%s には引数として最低 1 つのパッケージアーカイブファイルが必要です--%s には引数として最低 1 つのパッケージ名が必要です--%s は 4 つの引数が必要です--%s オプションは値をとりません--%s オプションは値が必要です--%s は正の 8 進数の引数が必要です--%s は 1 つ以上のパートファイルの引数を要求します--%s は引数に Packages ファイルを最大 1 つ必要とします--%s は多くとも 2 つの引数しかとりません--%s は最大でも 2 つの引数 (.deb とディレクトリ) しかとりません--%s は引数を 1 つだけとります--%s は引数をちょうど 2 つとります--%s は引数をとりません--%s は引数に 1 つのパッケージ名をとります--%s は引数をひとつ (.debファイル名) だけとります--%s が時代遅れの比較演算子 '%s' で使われています--auto は引数として 1 つのパートファイルを要求します--auto は --output オプションの使用を要求します--compare-versions の不正な比較--compare-versions は 3 つの引数 (<バージョン> <関係> <バージョン>) をとります--search には引数として最低 1 つのファイル名パターンが必要です--split は引数にソースファイル名が必要です--split は引数としてソースファイル名と分割先プレフィクスが必要です--update が指定されましたが、%s は存在しません--update は --remove には無意味です... OK のようです.../%s ...しかし:
+<圧縮> tar -cf からの <deb> は Debian 形式のアーカイブのファイル名。
+ <cfile> は管理用ファイルのコンポーネント名。
+ <cfield> は `control' ファイル内のフィールド名。
+
+<伸張><dpkg-deb --info パイプ><リンク> と <パス> は同じではなりません<リンク> は %s/<名前> を指すシンボリックリンクです。
+  (例: /usr/bin/pager)
+<名前> はこのリンクグループのマスター名です。
+  (例: pager)
+<パス> は alternative ターゲットファイルのうちの 1 つの場所です。
+  (例: /usr/bin/less)
+<優先度> は整数です; より大きな数を持つ選択肢は、自動モードにおいてより高い
+優先度を持ちます。
+
+<パッケージ状態と進捗ファイル記述子><標準エラー><標準入力><標準出力>'%s' を追加しています
+競合するパッケージのインストールを許可する選択肢 %2$s が利用できないので、alternative %1$s は変更されませんでした。見つからなかった設定ファイルを常にインストールする常に新しい設定ファイルを使用し、問い合わせない常に古い設定ファイルを使用し、問い合わせない別のプロセスが書き込み対象のデータベースをロックしていて現在それを変更している可能性があるので、以下の問題のいくつかは単にそのせいである可能性があります。
+アーキテクチャ%s を認証しています ...
+コマンド:
+  --add <所有者> <グループ> <モード> <ファイル> <パス>
+                           新しい <パス> エントリをデータベースに追加する
+  --remove <ファイル>       データベースから <パス> を削除する
+  --list [<グロブパターン>] データベース内の現在の overrides の一覧を表示する
+
+コマンド:
+  --check-supported                実行中の dpkg がトリガをサポートしているかどうかを調べる。
+
+コマンド:
+  --install <リンク> <名前> <パス> <優先度>
+    [--slave <リンク> <名前> <パス>] ...
+                           システムに alternatives のグループを追加する
+  --remove <名前> <パス>   <名前> のグループ alternative から <パス> を削除する
+  --remove-all <名前>      alternatives システムから <名前> のグループを削除する
+  --auto <名前>            マスターリンク <名前> を、自動モードに切り替える
+  --display <名前>         <名前> グループについての情報を表示する
+  --query <名前>           --display <名前> の機械解析向けバージョン
+  --list <名前>            <名前> グループのすべてのターゲットを表示する
+  --get-selections         マスター alternative 名およびその状態を一覧する
+  --set-selections         標準入力から alternative 状態を読み込む
+  --config <名前>          <名前> グループの alternatives を表示し、ユーザに
+                           使用したいものを尋ねる
+  --set <名前> <パス>      <名前> の alternative として <パス> を設定する
+  --all                    すべての alternatives に対して --config を呼び出す
+
+コマンド:
+  -s|--split <ファイル> [<接頭辞>] アーカイブを分割する
+  -j|--join <パート> <パート> ...  パートを結合する
+  -I|--info <パート> ...           パート情報を表示する
+  -a|--auto -o <完成名> <パート>   パートを自動的に収集する
+  -l|--listq                       一致しない部品を一覧表示する
+  -d|--discard [<ファイル名> ...]  一致しない部品を廃棄する
+
+コマンド:
+  [--add] <ファイル>        退避を追加する
+  --remove <ファイル>       退避を削除する
+  --list [<グロブパターン>] ファイルの退避を表示する
+  --listpackage <ファイル>  どのパッケージがファイルを退避するかを表示する
+  --truename <ファイル>     退避されたファイルを返す
+
+--compare-versions 用比較演算子:
+ lt le eq ne ge gt       (バージョンなしはどのバージョンよりも古いと見なす)
+ lt-nl le-nl ge-nl gt-nl (バージョンなしはどのバージョンよりも新しいと見なす)
+ < << <= = >= >> >       (コントロールファイルの構文の互換性のみ)
+
+設定ファイル '%s'
+設定ファイル '%s' (実体は '%s')
+これが助けになるかもしれないパッケージを設定する%s (%s) を設定削除しています ...
+%3$s (%4$s) を削除できるようにするために %1$s (%2$s) の設定削除 (deconfigure) を行います ...
+Debian `%s' パッケージ管理プログラム照会ツールバージョン %s。
+Debian %s パッケージトリガユーティリティバージョン %s。
+Debian %s バージョン %s。
+Debian `%s' パッケージアーカイブバックエンドバージョン %s。
+Debian `%s' パッケージ管理プログラム バージョン %s。
+Debian `%s' パッケージ分割/結合ツール; バージョン %s
+%s を削除しました。
+依存関係と競合説明要望=(U)不明/(I)インストール/(R)削除/(P)完全削除/(H)保持
+| 状態=(N)無/(I)インストール済/(C)設定/(U)展開/(F)設定失敗/(H)半インストール/(W)トリガ待ち/(T)トリガ保留
+|/ エラー?=(空欄)無/(R)要再インストール (状態,エラーの大文字=異常)
+展開時に安全な I/O 操作を行わない処理中にエラーが発生しました:
+終了状態:
+  0 = OK
+  1 = --auto 付きで、ファイルが 1 つのパートでない
+  2 = 問題発生
+ファイル `%.250s' はマルチパートアーカイブのパートではありません。
+フォーマットの文法:
+  フォーマットはそれぞれのパッケージについて出力する文字列となります。
+  フォーマットには標準のエスケープシーケンス \n (改行)、\r (復帰)、
+  \\ (バックスラッシュ) を含めることができます。パッケージ情報は、
+  ${var[;width]} 文法を使ってパッケージフィールドへの参照を示す変数
+  を挿入することで、含められます。width が負 (左寄せ) ではない場合
+  を除き、フィールドは右詰めされます。
+一般に有用な進行情報共有されている退避先 '%s' を削除する要求を無視します。
+退避パッケージ '%2$s' によって所有されるファイル '%1$s' を名前変更する要求を無視します。
+%d 個のパッケージ情報が更新されました。
+信じがたいほど大量の意味のない出力正当性チェックに失敗してもパッケージをインストールする別のパッケージを壊す可能性があってもインストールする新バージョンの設定ファイル %s をインストールしています ...
+メンテナスクリプトの呼び出しと状態ゴミファイルが格納用ディレクトリにちらかっています:
+'%s' を残します
+依存関係と競合の大量の出力dpkg/info ディレクトリなどのあまり意味のない大量の出力各設定ファイルについての大量の出力処理された各ファイルについての大量の出力トリガについての大量の出力フィールド名 `%.*s' に MSDOS のファイル終端 (^Z)フィールド `%.*s' の値に MSDOS のファイル終端 (^Z) (改行がありません?)現在の実行中にパッケージ %s のコピーが複数展開されました!
+1 回だけ設定を行います。
+名前退避先 '%s' がないので、何も削除されません。
+(注): root の PATH は通常、/usr/local/sbin、/usr/sbin、/sbin を含んでいるはずです設定は行いません。設定ファイルを新しいバージョンでないもので置き換えるか尋ねるオプション:
+  --admindir=<ディレクトリ>        %s の代わりに <ディレクトリ> を使う。
+  --by-package=<パッケージ>        トリガの待ち受け役を上書きする (通常は
+                                   dpkg によって設定される)。
+  --await                          パッケージは処理を待つ必要がある。
+  --no-await                       どのパッケージも処理を待つ必要がないことを示す。
+  --no-act                         テスト用途。実際には何も変更しない。
+
+オプション:
+  --depotdir <ディレクトリ> %s/%s の代わりに <ディレクトリ> を使う
+  -S|--partsize <サイズ>  -s 用に KB 単位にする (デフォルトは 450)
+  -o|--output <ファイル>  -j 用のファイル名 (デフォルトは
+                            <パッケージ>-<バージョン>.deb)
+  -Q|--npquiet            -a が 1 つのパートでない場合に出力しない
+  --msdos                 8.3 形式ファイル名を生成する
+
+各設定ファイルについての出力処理された各ファイルについての出力退避されているファイルを退避されていないバージョンで上書きするあるパッケージから提供されているファイルを別のもので上書きするあるパッケージのディレクトリを別のファイルで上書きするPATH に重要なプログラムを見つけられなくても実行する。問題が起きる可能性が高いPATH が設定されていませんパッケージ %s は保持されているため、手をつけません。上書きするには --force-hold を使ってください。
+パッケージ %s が複数回列挙されました。一度だけ処理します。
+パッケージ `%s' はファイルを含んでいません (!)
+以下のパッケージは再構成されていません:
+パッケージ %2$s のパート %1$d を記録しました (あと必要なのは パス先行依存フィールド%s を展開する準備をしています ...
+現在の選択 [*] を保持するには <Enter>、さもなければ選択肢の番号のキーを押してください: 優先度パッケージがおかしい、あるいはアーキテクチャがなくても処理するパッケージのバージョンがおかしくても処理する%s (%s) のトリガを処理しています ...
+大量のエラーが発生したため、処理が停止しました。
+%s (%s) の設定ファイルを削除しています ...
+パッケージ %s を %d パートから一緒に置いています: %s についての情報を %s から登録します。
+不可欠パッケージを削除するインストールに必要なパッケージを削除する%s (%s) を削除しています ...
+'%s' を削除しています
+パッケージをより古いバージョンで置き換えるインストールされたパッケージ %s (%s) の中のファイルで置き換えられました ...
+%s を使用して、取得可能なパッケージ情報を更新しています。
+古いパッケージ %s (%s) 中のファイルを置換しています ...
+以前に未選択のパッケージ %s を選択しています。
+選択肢すべての強制オプションをセットする%s (%s) を設定しています ...
+トリガについての過剰なほどの出力無効な行をスキップします: %s未知の alternative %s をスキップします。未選択パッケージ %s をスキップします。
+パッケージ %s を %d パートに分割しています: 状態以下のパッケージは、ほかのパッケージによって活性化されるトリガ処理を待っ
+ています。この処理は dselect または dpkg --configure --pending (あるい
+は dpkg --triggers-only) の利用で要求できます。
+以下のパッケージはインストール中に重大な問題が発生したため混乱しています。
+これらのパッケージ (とこれらに依存するパッケージ) が正しく動作するために
+は、以下のパッケージを再インストールしなければなりません:
+以下のパッケージは、データベース中に list 制御ファイルが見つかりません。
+再インストールする必要があります:
+以下のパッケージは、データベース中に md5sums 制御ファイルが見つかりません。
+再インストールする必要があります:
+以下のパッケージは最初の設定中に問題が発生したため、設定が終了していません。
+dpkg --configure <パッケージ> か dselect で設定 (configure) メニューオプショ
+ンを使って設定作業を再試行しなければなりません:
+以下のパッケージはインストール時に問題が発生したため、インストールが完了して
+いません。再度行えばインストールが完了する場合があります:
+これらのパッケージは dselect か dpkg --remove を使用して削除できます:
+以下のパッケージにはアーキテクチャ情報がありません:
+以下のパッケージは不正なアーキテクチャです:
+以下のパッケージは未知の外来アーキテクチャであり、フロントエンドで依存関係の問題を引き起こす可能性があります。これは外来アーキテクチャを dpkg --add-architecture で登録することで修正できます:
+以下のパッケージはトリガされましたが、トリガ処理はまだ完了していません。
+トリガ処理は dselect または dpkg --configure --pending (あるいは dpkg
+--triggers-only) の利用で要求できます。
+以下のパッケージは展開されましたが、まだ設定されていません。
+これらのパッケージが正常に動作するためには、dpkg --configure か
+dselect の設定 (configure) メニューオプションを使って設定を完了
+させなければなりません:
+alternative %2$s (%3$s を提供) には %1$d 個の選択肢があります。%s を提供するプログラムがありません。リンクグループ %s に 1 つの alternative のみがあります (%s が提供): %sこれはフリーソフトです; コピー条件については GNU 一般公有使用許諾書バージョン 2
+もしくはそれ以降を参照してください。このソフトウェアは無保証です。
+トリガの活性化と処理root でなくてもインストール/削除の実行を試みるすべての依存関係の問題を警告に切り替える依存バージョンの問題を警告に切り替える終了したら `exit' と入力してください。
+パッケージのインストールおよびアンストールについての情報は dpkg --help で参照 [*];
+ユーザ向けパッケージ管理ツールである `apt' または `aptitude' を使いましょう;
+デバッグフラグの一覧は dpkg -Dhelp で参照;
+強制オプションの一覧は dpkg --force-help で参照;
+*.deb ファイル操作のヘルプは dpkg-deb --help で参照;
+
+[*] のあるものは大量の情報が出力されます。`less' や `more' にパイプするようにしてください!*.deb ファイルの操作についてのヘルプは dpkg-deb --help を参照;
+パッケージのインストール、削除については dpkg --help を参照。ヘルプを参照するには dpkg-split --help とタイプしてください。このユーティリティについてのヘルプは dpkg-trigger --help で参照してください。%s (%s) を展開しています...
+%s (%s) で (%s に) 上書き展開しています ...
+%s を使用して、取得可能なパッケージ情報を追加しています。
+使い方: %s [<オプション> ...] <コマンド>
+
+プログラムの使い方についてのヘルプには、'%s --help' を使用してください。ユーザ向けパッケージ管理ツールである `apt' または `aptitude' を使いましょう。
+ファイルの退避についてのヘルプには、--help を使用してください。ファイルの状態情報を上書きすることについてのヘルプには、--help を使用してください。パッケージ照会についてのヘルプには、--help を使用してください。アーカイブの操作には dpkg -b, --build, -c, --contents, -e, --control, -I,
+ --info,  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile,
+ --fsys-tarfile を使用すること (%s --help を参照)
+
+新しい設定ファイルに、もし利用できるなら問い合わせせず
+にデフォルトオプションを使用する。デフォルトが見つから
+ない場合は、confold または confnew オプションが与えられ
+ていない限り、問い合わせが行われるバージョン作動中の %s をサポートしている dpkg のバージョンがまだ設定されていません。
+ `dpkg --configure dpkg' を行った後にもう一度実行してください。
+追加時のデフォルトは --local と --divert <オリジナル>.distrib です。
+削除時は --package または --local と、--divert が (指定されている場合は) 一致している必要があります。
+パッケージの preinst/postrm スクリプトは --package と --divert を常に指定すべきです。
+%s (%s) の削除または完全削除 ...
+[デフォルト=N][デフォルト=Y][デフォルトなし]dpkg が正しく動作するためには、admindir は instdir の中になければなりません('%2$s' により要求される) '%1$s' も設定しています%s の alternative (リンクグループ %s のパート) が存在しません。alternatives のリストから削除していますalternative %s はマスターになれません: これは %s のスレーブですalternative %s は %s のスレーブにはできません: これはマスターの alternative ですalternative %s は %s のスレーブになれません: これは %s のスレーブです%2$s の alternative %1$s は登録されていません。削除は行いません%2$s の alternative %1$s は登録されていません。設定は行いませんalternative リンク %s はすでに %s によって管理されていますalternative リンク %s はすでに %s によって管理されています (%s のスレーブ)alternative リンクが絶対パスであるべきにもかかわらずそうなっていません: %salternative 名 (%s) は '/' や空白を含んではなりませんalternative パスが絶対パスであるべきにもかかわらずそうなっていません: %s1つ以上のインストール済み実体がある、あいまいなパッケージ名 '%s' ですすでに存在する '%s' への override ですが、--force が指定されているので無視します'%s' の override がすでに存在するので、中止します%s のすべての退避%s から %s へのすべての退避ar メンバー名 '%s' の長さが長すぎますar メンバーサイズ %jd は長すぎます<空><なし><不明>アーキテクチャ '%s' は不正です: %sアーキテクチャ '%s' は予約されており、追加できませんアーカイブ '%.250s' は 2 つのコントロールメンバーを含んでいます。終了しますアーカイブ `%s' は時期尚早のメンバー '%.*s' ('%s' の前に) を含んでいます。終了しますアーカイブ `%s' はメンバー '%.*s' の未知の圧縮を利用しています。終了しますアーカイブに含まれるオブジェクト `%.255s' が不明な型 0x%x ですアーカイブコントロールメンバーサイズアーカイブは無効なフォーマットバージョンです: %sアーカイブは不正なコントロール長 '%s' を含んでいますアーカイブのヘッダに改行がありませんアーカイブ情報ヘッダメンバーアーカイブはフォーマットバージョン %d.%d です。より新しい dpkg-deb を入手してくださいアーカイブのマジックバージョン番号アーカイブのメンバーヘッダアーカイブのパート番号アーカイブのパートオフセットアーカイブパート番号アーカイブの合計サイズ自動モード%s/%s の自動更新は無効になっています。そのままにしておきます別のパッケージによってトリガ処理を待ち受けていますフィールド `%.*s' の値に空の行削除またはインストールの失敗のため壊れていますpostinst の失敗のため壊れています未知の選択肢 %s をインストールできませんパッケージ情報ファイル `%.255s' を mmap できません古い postrm スクリプトを削除できませんパッケージ情報ファイル `%.255s' の状態を取得できませんar メンバーファイル (%s) を '%s' に追加できません: %s分割パッケージパート '%s' を '%s' に追加できません: %s'%s' に追加できません伸張パイプをクローズできませんファイル '%s' の MD5 ハッシュを計算できません: %star ファイル '%.255s' の MD5 ハッシュを計算できません: %sマルチバイトシーケンス '%s' をワイドキャラクタに変換できませんマルチバイト文字列 '%s' をワイドキャラクタ文字列に変換できません'%s' を アーカイブ '%s' にコピーできません: %s'%s' を '%s' にコピーできません: %sアーカイブメンバーを '%s' から伸張パイプにコピーできません: %s'%.255s' の展開済みデータを '%.255s' にコピーできません: %sディレクトリは退避できませんファイル '%s' をそれ自身に退避することはできませんコントロールファイル '%s' を '%s' から展開できません: %s分割パッケージパート '%s' を展開できません: %sセキュリティラベルのハンドルを得られません(`%2$.255s' にある) `%1$.255s' をオープンできませんアーカイブパートファイル `%.250s' をオープンできませんセキュリティ状態通知チャンネルを開けません('%2$.250s' から) 設定ファイルディレクトリ '%1$.250s' を読めません情報ディレクトリを読み取れません`%.250s' を削除できませんデータベースで現在使用中のアーキテクチャ '%s' を削除できません外来でないアーキテクチャ '%s' は削除できません(`%2$.250s' の) 古いバックアップファイル `%1$.250s' を削除できません古い設定ファイル `%.250s' (= `%.250s') を削除できません古いファイルリストを削除できません'%s' を '%s' に名前変更できません(%2$.250s が要求する) %1$.250s の先行依存 (pre-dependencies) を解決できませんディレクトリ `%.255s' を走査できませんupdates ディレクトリ `%.255s' を走査できません先行依存を解決する方法がわかりません:
+ %sファイルオブジェクト '%s' のセキュリティコンテキストをセットできませんメンテナスクリプトのセキュリティ実行コンテキストをセットできません'%s' からアーカイブコントロールメンバーをスキップできません: %s'%s' からアーカイブメンバーをスキップしました: %sファイル '%.255s' をパイプからスキップできません (置き換えられたか除外された?): %sファイル `%.255s' のパディングを飛ばすことができません: %s'%s' のパッケージヘッダ分割をスキップできません: %s(`%2$.255s' にある) `%1$.255s' の状態を取得できませんファイル '%s' の状態を取得できませんdpkg-deb から末尾の余計なゼロを取り除けません: %s文字 `%c' は許可されていません (文字、数値と '%s' のみ使用可能です)圧縮データが壊れていますtar メンバーを圧縮しています設定ファイル `%.250s' がパッケージ内にありません設定ファイル `%.250s' の状態を取得できません設定ファイル '%s' がプレーンファイルではありません設定ファイル差分の可視化設定ファイル '%s' の後ろに空白が付いています設定ファイル名 '%s' が重複しています設定ファイル名 '%s' は長すぎるか、最後の改行がありません設定ファイルシェル設定エラー: %s:%d: %sアクション -%c (--%s) と -%c (--%s) が競合します`%.250s' か `%.250s' が関係する退避操作 (diversion) は競合していますパッケージの競合 - %.250s のインストールは行いません%2$s によって壊れた %1$s の設定削除を考えています ...%2$s を有効にするため、不可欠パッケージ
+ %1$s の設定削除を考慮しています%2$s を選択するために %1$s の削除を考えています ...コントロールディレクトリの許可属性 %03lo は不正です (>=0755 かつ <=0775 でなければなりません)コントロールディレクトリがディレクトリではありませんコントロールファイル '%s' が存在しませんパッケージ '%2$s' のコントロールファイル '%1$s' が空のファイル名を含んでいますパッケージ '%2$s' のコントロールファイル '%1$s' に最後の改行がありませんコントロールファイルは %c を含んでいますコントロールメンバー壊れた情報データベース形式ファイル '%s'ログ `%s' をオープンできませんでした: %s古いファイル '%.250s' の状態を取得できないので、削除しません: %s`%i' をストリームとしてオープンできませんでした現在の alternative %1$s が未知なので、リンクグループ %3$s のために %2$s に切り替えていますトリガ処理中に循環が発見されました:
+ トリガをしたパッケージのチェインにおそらく原因があります:データメンバー依存関係の問題 - トリガを未処理のままにします依存関係の問題 - 設定を見送ります依存関係の問題 - 削除しません依存関係の問題により %s の設定ができません:
+%s依存関係の問題により %s のトリガの処理ができません:
+%s依存関係の問題により、%s の削除ができません:
+%s時代遅れのスレーブリンク %s を破棄しています (%s)%s による退避 (divert) 元: %s
+%s による退避 (divert) 先: %s
+%2$s による %1$s の退避 (divert)%3$s による %1$s から %2$s への退避 (divert)退避先は改行を含んではなりません%s により退避 (divert) された: %s
+完了
+%.250s を %.250s から %.250s にダウングレードしていますdpkg がインストール済みとして記録されていないため、%s をサポートしているか確認できません!
+重複する待ち受けトリガパッケージ `%.255s'ファイル名 `%.250s' およびパッケージ `%.250s' に関係するファイルトリガが重複していますパス %s が重複しています重複する保留トリガ `%.255s'スレーブリンク %s が重複していますスレーブ名 %s が重複しています`%s' フィールドの値が重複していますユーザ定義フィールド `%.*s' の値が重複しています空のフィールド名conffiles の読み取り中に fgets からの空の文字空のトリガ名は許されていませんフィールド名 `%.*s' の後にファイル終端フィールド `%.*s' の値の前でファイル終端 (最後の改行がありません)フィールド `%.*s' の値の間にファイル終端 (最後の改行がありません)conffile プロンプトでの標準入力にファイル終端がありますエポックバージョン中の epoch が負の数値ですバージョン中の epoch が数値ではありませんバージョン中の epoch が大きすぎますエラー'%s' の確認中にエラーが発生しました%.250s のクローズ時にエラーが発生しました設定ファイル `%.255s' のクローズ時にエラーが発生しました`%.255s' のクローズ/書き込み中にエラーが発生しましたデバイス `%.255s' の作成中にエラーが発生しましたディレクトリ `%.255s' の作成中にエラーが発生しましたハードリンク `%.255s' の作成中にエラーが発生しました新しいバックアップファイル '%s' の作成中にエラーが発生しましたパイプ `%.255s' の作成中にエラーが発生しましたシンボリックリンク `%.255s' の作成中にエラーが発生しました`%.250s' が存在しないためエラーが発生しましたフック '%s' の実行中にエラーが発生しました。終了コード %dvarbuf 変数内のフォーマット文字列にエラーがありますフォーマット表示エラー: %s新しいファイル '%s' のインストール中にエラーが発生しましたconffiles ファイルのオープン中にエラーが発生しました設定ディレクトリ '%s' のオープン時にエラーが発生しましたアーカイブ %s の処理中にエラーが発生しました (--%s):
+ %sパッケージ %s の処理中にエラーが発生しました (--%s):
+ %s%.250s の読み取り中にエラーが発生しましたファイル %2$.255s からの %1$s の読み取り中にエラーが発生しましたconffiles ファイルの読み取り中にエラーが発生しましたdpkg-deb パイプからの読み込みエラーですトリガ遅延ファイル `%.250s' の読み取り中にエラーが発生しました古いバックアップファイル '%s' の削除中にエラーが発生しました`%.255s' の所有者設定エラーですシンボリックリンク `%.255s' の所有者設定中にエラーが発生しました`%.255s' の許可属性設定エラーです`%.255s' のタイムスタンプ設定エラーです%.250s のオープン時にエラーが発生しましたエラー: 獲得できないシグナル %s : %s
+'%s' の書き込み中にエラーが発生しました`%s' の書き込みエラーです'%s' への書き込みエラーですアーキテクチャリストへの書き込みエラーです標準エラー出力への書き込み中にエラーが発生しました (conffile プロンプト前で検出)。メモリの割り当てに失敗しました失敗したパッケージ一覧に新しいエントリを追加するためのメモリを割り当てることができませんでした: %s`%.255s' ディレクトリへの移動に失敗しました以下のディレクトリへの移動に失敗しました`%.255s' への chroot に失敗しました読み込み後のクローズに失敗しました: `%.255s'ディレクトリの作成に失敗しましたパイプの作成に失敗しましたファイル記述子 %d の複製に失敗しましたstd%s の複製に失敗しましたar メンバーファイルの fstat に失敗しました (%s)アーカイブの状態を取得できませんでした (fstat 失敗)diversions ファイルの状態を取得できませんでした (fstat に失敗)statoverride ファイルの状態を取得できませんでした (fstat に失敗)一時ファイルの作成に失敗しました (%s)設定ファイル '%.255s' の読み取り用のオープンに失敗しました: %sdiversions ファイルのオープンに失敗しましたパッケージ情報ファイル `%.255s' 読み取り用のオープンに失敗しましたstatoverride ファイルのオープンに失敗しましたリストファイル `%.250s' に関係するトリガをオープンできません読み取りに失敗しました(`%2$.255s' にある) `%1$.255s' の読み取りに失敗しましたアーカイブ `%.255s' の読み取りに失敗しました統合した更新用ファイル %.255s の削除に失敗しました一時的な更新用ファイル %.255s の削除に失敗しました一時ファイルの rewind に失敗しました (%s)ファイル `%.250s' に関係するトリガの巻き戻しに失敗しましたシークに失敗しました`%.250s' の既存のシンボリックリンクの状態 (逆参照) を取得できませんでしたシンボリックリンク `%2$.250s' の提案された新しいシンボリックターゲット `%1$.250s' の状態 (逆参照) を取得できませんでした一時ファイルの状態取得に失敗しました (%s)一時ファイルのアンリンクに失敗しました (%s), %s書き込みに失敗しました'%2$.50s' についての %1$s データベースレコードを '%3$.250s' に書き込めませんでした`%.50s' についての詳細を `%.250s' に書き込めませんでしたtar パイプへの書き込みに失敗しました (%s)fgets が `%.250s' から空の文字列を取得しましたフィールド名 '%.*s' をハイフンから始めることはできませんフィールド名 `%.*s' の後はコロンでなければなりませんフィールド幅が範囲外ですファイル '%.250s' は無効な形式バージョンです: %sファイル `%.250s' は壊れています - %.250s がありませんファイル `%.250s' は壊れています - MD5 チェックサム `%.250s' が不正ですファイル `%.250s' は壊れています - 壊れたアーカイブヘッダマジックですファイル '%.250s' は壊れています - アーカイブのパート番号が不正ですファイル `%1$.250s' は壊れています - %3$s にある数字 (コード %2$d) は不正ですファイル `%.250s' は壊れています - 第 1 ヘッダの終わりに不正なマジックナンバーファイル `%.250s' は壊れています - 第 2 ヘッダの最後のマジックナンバーが不正ですファイル '%.250s' は壊れています - アーカイブのパート番号が不正ですファイル `%.250s' は壊れています - 補充した文字 (コード %d) は不正ですファイル `%.250s' は壊れています - %.250s の後の改行がありませんファイル '%.250s' は壊れています - アーカイブのパート番号の間にスラッシュがありませんファイル `%.250s' は壊れています - 情報セクションが null ですファイル `%.250s' は壊れています - 第 2 メンバーがデータメンバーではありませんファイル `%.250s' は壊れています - サイズがヘッダのパート番号情報と異なりますファイル `%.250s' は壊れています。短すぎますファイル `%.250s' は壊れています - パート番号がヘッダのサイズ情報と異なりますファイル '%.250s' は形式バージョン %d.%d です。より新しい dpkg-split を入手してくださいファイル `%.250s' はアーカイブパートではありませんファイル '%s' は壊れています。%s は整数範囲外ですファイル `%s' はアーカイブパートでありません
+ファイルフォーマットを解釈できませんおそらく ASCII モードでダウンロードしたためにアーカイブ
+ ファイルが壊れているようですファイルは改行を含んでいてはなりませんファイルトリガ記録は無効なパッケージ名 `%.250s' について言及しています (ファイル `%.250s' に関係): %.250sファイル名 "%s" は絶対パスではありませんファイル `%.250s' と `%.250s' は同じファイルのパートではありませんパッケージ `%.250s' のファイル一覧ファイルが空のファイル名を含んでいますパッケージ '%.250s' のファイル一覧ファイルに最後の改行がありませんパッケージ '%.250s' のファイル一覧ファイルがありません。このパッケージには、現在インストールされているファイルがないものとしますリンクグループ %2$s が壊れているため、alternative %1$s の再インストールを強制していますfork 失敗ゴミに続く形式バージョン形式バージョンはドットを含みません形式バージョン番号空のメジャーコンポーネントの付いた形式バージョン空のマイナーコンポーネントの付いた形式バージョン'%s' の壊れた ar ヘッダを生成しましたグループ '%s' が存在しませんヘッダがパートを作るのにあまりにも長すぎます。パッケージ名またはバージョン番号が異常に長いか何かでしょう。中止しますコントロールファイルの %d 個の警告を無視します破損を無視しています。かまわずに続行します!競合を無視しています。かまわず続行します!%s の依存関係の問題を無視しています:
+%s先行依存の問題を無視しています!インストールされていない %.250s を削除する要求を無視します%.250s の削除の要求を無視します。システム上には設定ファイルのみ
+があります。設定ファイルも削除するには --purge を使用してください指定子 '%s:%s' に不正なアーキテクチャ名があります: %s不正な待ち受けパッケージ名 '%.250s': %.250s%d 行目のパッケージ名は不正です: %.250s待ち受けトリガ `%.255s' に不正なパッケージ名があります: %s指定子 '%s%s%s' に不正なパッケージ名があります: %s無効な保留トリガ名 `%.255s': %s情報データベース形式 (%d) が偽物か新しすぎます。より新しい dpkg を取得してみてください情報ファイル %s/%s がどのパッケージにも関連付けられていません`%.250s' のインストール導入済み%.250s のインストールは %.250s を壊す可能性があり、
+ 設定削除は許されていません (--auto-deconfigure が助けになります)%.250s のインストールは既存のソフトウェアを壊す可能性があります内部エラー (バグ)アーカイブ '%2$.250s' のメンバー '%3$.16s' サイズに無効な文字 '%1$c' がありますフィールド幅に無効な文字 `%c' がありますリビジョン番号に無効な文字がありますバージョン番号に無効な文字があります-%c に対する不正な圧縮レベルです: '%ld'不正な圧縮パラメータです: %s無効な deb フォーマットバージョン: %s--%s に対する不正な整数です: `%.250s'トリガ名 `%.250s' に無効または未知の文法があります (パッケージ `%.250s' に関係するトリガ)トリガ遅延ファイル `%2$.250s' に無効なパッケージ名 `%1$.250s' がありますstatoverride のグループ ID %s は無効ですstatoverride のモード %s は無効ですstatoverride のユーザ ID %s は無効です無効な状態無効なトリガ名 `%.250s': %.250s%s の読み取り試行中に完了していない行があります%s の読み取り試行中、行が長すぎるか完了していませんでしたリンク %s がプライマリ/スレーブの両方にありますローカルな退避 (divert) 元: %s
+%s のローカルな退避 (divert) 先%s から %s へのローカルな退避 (divert)ローカルな退避 (divert) 先: %s
+ローカルに退避 (divert) された: %s
+長いファイル名メンテナスクリプト `%.50s' の許可属性 %03lo は不正です (>=0555 かつ <=0775 でなければなりません)メンテナスクリプト `%.50s' がテキストファイルかシンボリックリンクではありません。メンテナスクリプト `%.50s' の状態を取得できませんmalloc 失敗 (%zu バイト)手動モードマスターファイルマスターリンク%s は %s を提供するため、削除すると問題があるかもしれません ...空の文字ではいけませんメモリ使用上限に達しました退避先が不整合です
+  `%s' の削除中に
+  `%s' を発見しましたパッケージの不整合です
+  `%s' の削除中に
+  `%s' を発見しました閉じブレースがありません共存インストールできないパッケージと共存インストールできるパッケージの実体が混在して提供されています。おそらく非公式の dpkg からの更新によるものですマルチアーキテクチャ複数の競合 (Conflicts) および 置換 (Replaces)共存インストールできないパッケージ実体が複数提供されています。おそらく非公式の dpkg からの更新によるものです複数の statoverrides が ファイル '%.250s' に対して提供されていますメンテナスクリプトから (または --by-package オプションを付けて) 呼ばれなければなりません英数字で始まらなければなりません英数字の文字で始まらなければなりません名前 %s がプライマリ/スレーブの両方にありますアクションを指定するオプションが必要ですフィールド名 `%.*s' に改行アーカイブオブジェクト名 `%.255s' の中での改行は許されませんパス名 '%s' に改行は許されませんupdate-alternatives ファイル内での改行は禁止されています (%s)%s の alternatives がありませんoverride が提供されていません`%.255s' にパッケージ情報がありませんパッケージ `%s' はインストールされていないので、設定できません%s に一致するパッケージが見つかりませんパターン %s に一致するパスが見つかりません失敗。%s は不可欠パッケージです。%s を有効に
+ するために、その設定削除を行いません失敗。%s を処理できません (--auto-deconfigure を使いましょう):
+%sコントロールエリアのコンテンツを確認できません未導入インストールされていませんが、設定が残っていますシンボリックリンクではないので、%s を削除しません%s をリンクで置き換えませんバージョン番号のコロンの後に何もありません--%s のコンマで区切られたリスト `%.250s' に空のパッケージ名アーカイブパート数'--%s' オプションは時代遅れです。利用できないパッケージは自動的にクリーンアップされます時代遅れの強制・拒否 (force/refuse) オプション `%s'時代遅れのオプション '--%s'古い設定ファイル '%.250s' が空のディレクトリでした (今削除されました)古いファイル '%.250s' がいくつかの新しいファイルと同一です! ('%.250s' と '%.250s' の両方)旧バージョンのパッケージに含まれる `%.250s' で始まる情報ファイル名はあまりにも長すぎます'%s' フィールドには正確なバージョンのみが使用できます(%2$.255s にある) コンポーネント `%1$.255s' のオープン中に予期しない失敗が起こりました新しいクリーンアップエントリ用のメモリが不足しています多すぎる引数のために、新しいクリーンアップエントリ用のメモリが不足しています新しいエラーコンテキスト用のメモリが不足しています--force が有効なので、問題を無視します:パッケージ %.250s はすでにインストールおよび設定されていますパッケージ %.250s は設定の準備ができていません。
+ 設定できません (現在のステータス `%.250s')パッケージ %.250s はトリガ処理の準備ができていません
+ (保留トリガを除いた現在のステータス `%.250s')パッケージ %s %s は %s が異なるバージョン (%s) のため、設定できませんパッケージ %s は %s の準備ができていないため、設定できません (現在のステータス '%s')パッケージ %s が一覧を情報ファイルとして含んでいましたパッケージ %s は再インストールが必要ですが、要求に従いともかく削除しますパッケージ %s は再インストールが必要です。削除しませんパッケージ %s は保持されていますが、要求どおり処理しますパッケージ '%s' はまだ利用可能でありませんパッケージ '%s' はまだインストールされていませんパッケージ '%s' はまだインストールされておらず情報の利用は不可能ですパッケージアーキテクチャパッケージアーキテクチャ (%s) がシステム (%s) と一致しませんパッケージに含まれる (`%.50s' で始まる) コントロール情報ファイル名はあまりにも長すぎますパッケージコントロール情報にディレクトリ `%.250s' が含まれていますパッケージコントロール情報の `%.250s' の rmdir がディレクトリではないと言っています。パッケージ制御情報の展開ほかのパッケージの同名ファイルは次の名前に退避した: %s
+パッケージフィールド値の抽出パッケージファイルの MD5 チェックサムパッケージファイルシステムアーカイブの抽出パッケージは状態 %s ですが、トリガを待ち受けていますパッケージは状態 %s ですが、トリガは保留されていますパッケージが非常に矛盾した状態に陥りました。
+削除を行う前にこのパッケージを再インストールすべきですパッケージが非常に矛盾した状態に陥りました。設定を試みる
+前に再インストールすべきです。パッケージは改行を含んではなりませんパッケージ名パッケージ名に小文字アルファベット、英数字、`-+.' 以外の文字がありますパッケージ署名の検証パッケージバージョン番号パート %d がありませんパートファイル `%.250s' がプレーンファイルではありませんパートサイズが大きすぎるか、正値でありませんパートサイズは (ヘッダを考慮すると) 少なくとも %d KiB でなければなりません合格
+ペーストパスは改行を含んではなりません先行依存問題 - %.250s をインストールしません優先度優先度が範囲外です優先度は整数でなければなりません%s の優先度は範囲外です: %s%s の優先度: %s%.250s で読み取り時にエラーが発生しました%.250s で読み取りエラー設定ファイル `%.255s' の読み込みエラー標準入力からの読み取り時にエラーが発生しましたconffile プロンプトでの標準入力上の読み取りエラーですパッケージ情報ファイル `%.255s' を読み込んでいますパッケージ情報ファイル '%s' を読み込んでいます: %sstatoverride ファイル '%.250s' を読み込んでいます再集積されたパッケージファイル%s が %s を含むことを考慮すると、先行依存の問題があります:
+%s%s が %s を含んでいることを考慮すると:
+%s%.250s の削除データベースで現在使用中のアーキテクチャ '%s' を削除しています手動で選択された alternative を削除しています - %s を自動モードに切り替えています名前変更は `%s' を異なるファイル `%s' で上書きすることを伴います。
+これは許可されていません。名前変更: 重複する古いリンク '%s' を削除してください要求した操作はスーパーユーザの権限が必要ですクリーンアップ用の rm コマンド検索しましたが、パッケージ (*.deb にマッチするファイル) が見つかりませんでした<不明>%s の自動選択を設定していますパッケージ情報エントリが複数見つかりました。許されるのは1つのみですファイルを移動するシェルコマンド関連する (リンクグループ %3$s の) ファイル %2$s が存在しないので、%1$s の作成をスキップしますスレーブファイルスレーブリンクスレーブリンクがメインリンク %s と同一ですスレーブ名ソースファイル `%.250s' がプレーンファイルではありません分割パッケージの再集積statoverride ファイルが空行を含んでいますstatoverride ファイルの最後の行に改行がありません状態状態記録末尾の / を取り除いていますサブプロセス %s はエラー終了ステータス %d を返しましたシンボリックリンク '%.250s' のサイズが %jd から %zd に変更されましたファイル `%.250s' のファイルトリガに文法エラーがありますstatoverride ファイルに文法エラーがあります引数を 1 つ (トリガ名) だけとります対象がディレクトリです。コントロールファイル検証をスキップできませんパート %d には複数のバージョン、少なくとも `%.250s' と `%.250s' が存在しますこのパッケージの新バージョンにはスクリプトがありません。終了しますこれは不可欠 (essential) パッケージです - 削除すべきではありません自動更新に戻すには、'%s --auto %s' を使ってください大量のエラーが発生したため、中断します`%.250s' の行が長すぎるか改行がありませんファイル `%.250s' に関係するトリガが文法エラーです; 無効なパッケージ名 `%.250s': %.250sトリガ名に無効な文字が含まれていますトリガ記録がまだ存在しませんトリガ済みci ファイル `%.250s' のトリガは不正なトリガ文法をトリガ名 `%.250s' に含んでいます: %.250sci ファイルのトリガは未知のディレクティブ `%.250s' を含んでいますci ファイルのトリガは未知のディレクティブ文法を含んでいますトリガのデータディレクトリがまだ作成されていませんトリガがループしており、捨てられました代わりに新規パッケージからスクリプトを実行してみます ...'%.250s' を上書きしようとしています。これはパッケージ %.250s %.250s にも存在します`%.250s' を上書きしようとしています。これは `%.250s' の退避バージョンです`%.250s' を上書きしようとしています。これは `%.250s' (パッケージ: %.100s) の退避バージョンです'%.250s' ディレクトリを上書きしようとしています。パッケージ %.250s %.250s ではディレクトリではありませんでした共有されている '%.250s' を上書きしようとしています。これはパッケージ %.250s の他の実体と異なります2 つのコマンドが指定されました: --%s と --%s入力パートファイル `%.250s' を(再)オープンできませんターゲットファイル '%.250s' の所有者を変更できません`%.250s' の存在を確認できませんファイル '%s' のロック状態を確認できませんアーカイブ `%.250s' の存在を確認できません`%.255s' のバックアップ用シンボリックリンクを chown できません別バージョンのインストール前の `%.255s' まわりのゴミ掃除に失敗しましたファイル '%s' をクローズできません新しいファイル `%.250s' をクローズできません新しいトリガ遅延ファイル `%.250s' をクローズできません更新した `%.250s' のステータスをクローズできません`%.255s' を作成できません(`%2$.255s' の処理中に) `%1$.255s' の作成に失敗しましたファイル '%s' を作成できません新しいファイル '%.250s' を作成できません一時ディレクトリを作成できません状態ディレクトリ `%.250s' のトリガを作成できませんコントロール情報ファイル `%.250s' を削除できません古いディレクトリ '%.250s' を削除できません: %s古い格納ファイル `%.250s' を削除できません`%.250s' を廃棄できません%s を実行できません (%s)%.250s に文字を補充できません文字の補充後に %.250s をフラッシュできませんファイル '%s' をフラッシュできません新しいファイル '%.250s' をフラッシュできません更新した `%.250s' のステータスをフラッシュできませんソースファイルの状態を取得できません (fstat 失敗)更新した `%.250s' のステータスを fsync できませんディレクトリ '%s' のファイル記述子を取得できません%2$.250s の実行前にシグナル %1$s を無視できません`%.250s' を `%.250s' としてインストールできません(おそらく) 新しい情報ファイル `%.250s' をインストールできません新規情報ファイル `%.250s' を `%.250s' としてインストールできません新しいトリガ遅延ファイル `%.250s' をインストールできません`%.255s' の新しいバージョンをインストールできません更新した `%.250s' のステータスをインストールできません%s をロックできません新バージョンのインストール前の `%.255s' のバックアップ用リンクを作成できません`%.255s' のバックアップ用シンボリックリンクを作成できません新バージョンをインストールするための `%.255s' の退避ができませんでした'%.255s' をオープンできませんディレクトリ '%s' をオープンできませんファイル '%s' をオープンできません新しい格納ファイル `%.250s' をオープンできません出力ファイル `%.250s' をオープンできませんソースファイル `%.250s' をオープンできません一時コントロールディレクトリをオープンできませんci ファイル `%.250s' のトリガをオープンできませんトリガ遅延ファイル `%.250s' をオープンできません新しいトリガ遅延ファイル `%.250s' をオープンおよび作成できません格納用ディレクトリ `%.250s' を読み取ることができませんファイル `%.250s' のファイルトリガを読み取れません%.250s のファイル記述子フラグを読み取ることができませんリンク `%.255s' を読み取れませんパートファイル `%.250s' の読み取りに失敗しました'%s' を削除できません'%.250s' のバックアップコピーを削除できませんソースファイル `%s' のコピーを削除できません`%.250s' の新たに展開したバージョンを削除できません`%.250s' の新たにインストールしたバージョンを削除できませんバックアップ用コピーの再インストールを許可するために、`%.250s' の新たにインストールされたバージョンを削除できません古い情報ファイル `%.250s' を削除できません格納ファイル `%.250s' の名前を `%.250s' に変更できませんパートファイル `%.250s' を再オープンできませんバージョン `%.250s' のバックアップを復元できません'%.255s' を安全に削除できません'%.255s' を安全に削除できません古いファイル '%.250s' を安全に削除できません: %s文字の補充後に %.250s の最初に戻れません%s データベースファイル用のバッファリングを設定できません%.250s の close-on-exec フラグを設定できません`%.250s' の実行許可を設定できませんターゲットファイル '%.250s' のモードを設定できませんメンテナスクリプトで setenv できませんサブプロセスで setenv できません%s `%.250s' の状態を取得できません%s `%.250s' の状態を取得できません: %s`%.250s' の状態を取得できませんコントロールディレクトリの状態を取得できません現在インストールされている設定ファイル `%.250s' の状態を取得できません新規配布設定ファイル '%.250s' の状態を取得できませんその他の新しいファイル `%.250s' の状態を取得できません別バージョンのインストール前の復元された `%.255s' の状態を取得できませんソースファイル '%.250s' の状態を取得できませんトリガ遅延ファイル `%.250s' の状態を取得できませんディレクトリ '%s' と同期できませんファイル '%.255s' を同期できませんファイル '%s' を同期できません新しいファイル '%.250s' を同期できません更新した `%.250s' のステータスを切り詰められません%s をロック解除できませんファイル '%s' に書き込めません新しいファイル '%.250s' に書き込めません新しいトリガ遅延ファイル `%.250s' を書き込めません状態ファイル記述子 %d に書き込めません更新した `%.250s' のステータスを書き込めません'%s' の引用符が釣り合いません予期せぬ bzip2 エラー%d 行目のパッケージと選択の後に予期しないデータがあります%d 行目のパッケージ名の後に予期しないファイル終端があります%d 行目の行末までに予期しないファイル終端があります%2$.255s 中の %1$s に予期しないファイルの終わりがあります%d 行目のパッケージ名に予期しないファイル終端がありますファイルまたはストリームの予期しない終わりです'%.250s' 内で予期しないファイルの終わりです%s の読み取り試行中に、予期せぬファイルの終わりがあります予期しない入力の終わりです%d 行目のパッケージ名の後に予期しない改行があります%d 行目のパッケージ名に予期しない改行がありますstatoverride ファイルに予期せぬ eof があります`%s' は不明な引数です不明な圧縮方法です`%s' は不明な圧縮戦略です!`%s' は不明な圧縮形式です!不明な deb フォーマットバージョン: %s不明な強制・拒否 (force/refuse) オプション `%.*s'不明なオプション '%s'-%c は不明なオプションです不明なオプション --%s不明な検証出力フォーマット '%s'%d 行目の要求状態は不明です: %.250s展開済み (未設定)サポートされていない圧縮プリセット一律圧縮としてサポートされていない圧縮形式 '%s' ですファイルヘッダにサポートされていないオプションがありますサポートされていない完全性チェックの形式ですupdates ディレクトリにあるファイル `%.250s' は名前が長すぎます (長さ=%d, 最大=%d)updates ディレクトリにあるファイル名の長さが異なります (%d と %d)リンクグループ %2$s がスレーブッリンクを変更したため、alternative %1$s を更新していますユーザ '%s' が存在しませんユーザ定義フィールド名 `%.*s' が短かすぎます%2$s (%3$s) を提供するために自動モードで %1$s を使います%2$s (%3$s) を提供するためにマニュアルモードで %1$s を使います'%s' の値に不正な形式を持つ行 '%.*s' があります'%s' フィールドの値はこのコンテキストでは許可されていませんパッケージ %s の検証に失敗しました!パッケージ %s の検証に失敗しましたが、要求どおりインストールを行います<なし>%2$.250s のバージョン %1$.250s がすでにインストールされています。スキップしますバージョン '%s' は不正な構文ですバージョン番号が数字から始まっていませんバージョン文字列にスペースが埋め込まれていますバージョン文字が空ですバージョン付き提供 (Provides)サブプロセス %s の待機に失敗しました警告%s の読み取り中: %s%.250s の削除中、ディレクトリ '%.250s' が空でないため削除できませんでした%.250s の削除中ですが、ディレクトリ '%.250s' を削除できません: %s - ディレクトリはマウントポイントではありませんか?%.250s を %.250s から %.250s へのダウングレードは行いません。スキップします問題ありません。(%2$s によって壊れた) %1$s の設定削除をします問題ありません。%2$s を選択するために %1$s を削除しますパッケージ名として指定するのは、その中に含まれているファイルの名前ではなく、パッケージ名そのものでなければなりません
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/km.gmo dpkg-1.20.7.1/po/km.gmo
--- dpkg-1.20.7.1-orig/po/km.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/km.gmo	2021-06-09 18:25:15.099503649 -0500
@@ -0,0 +1,250 @@
+��M�
+���a�=S&�.��.�' C4d�5�-�.1H$z4�/�$)I6i1�1�! & 2 )J 9t .� '� &!3,!5`!�!�!�!�!-�!H"QL"A�"e�"fF#7�#<�#B"$e$|$
�$ �$�$5�$1%G%Y%#r%!�%�%K�%5!&-W&!�&�&5�&�&,'.<'.k'�'H�'6((:(>c(�(��(W)gn)�*�+0,36,1j,�,�,*�,2�,�--�./�.]/t/Gy/8�/,�/'0(F0:o0 �0-�0�0�1��1��2�m34�84 �4,�4$
+5/575C5O56\5!�5�5%�5�5%6"?6&b6�6�6;�63�6+7AH7�7&�7"�7E�7,98"f8-�85�8,�8G9b9*�9"�9"�9�9:: :8:-W:)�:�:�:)�:
;,;!K;!m;�;%�;%�;�;<!*<L< i<#�<+�<%�<$=%= A=b=:u=�=�=�=$>+>F>\>t>�>�>!�>�>5? ;?%\?�?0�?*�?.�?+-@)Y@4�@4�@;�@<)A:fA7�A0�A;
+B?FB$�BA�B$�B!C4CRC:pC<�C�C'�C	D"&D!IDkDO�D8�D*
E8E7PE5�E!�E�E�E5F"IF4lF
�F �F%�FG�F?>G#~G7�G2�GY
H4gHF�H1�H;IQI pID�I�I&�I-J>J.FJuJ�J)�J�J&�JKH-K0vK6�K4�KL%3L%YLL+�L4�LF�L@<M+}M%�M1�M+NN-N*|N�N+�N,�NO"5O$XO*}O�O*�O&�O3P4JP)P,�PD�P*Q4FQ&{Q#�Q#�Q%�Q'R.8RgR!�R4�R4�R[S,lS4�S#�S,�S/T+OT-{T�T�T2�T&UB6U1yU*�U6�U&
V44V1iV�V�V"�V�VW(WCWS_WM�W(X"*XMXeX`mX��XUUZ��[m_\X�\&]�E]H�]`^�s^Q�^�I_z`��`e*aD�a��atnb��brtcK�c�3d��dp�e]�e"Sf^vf��f�wg�7h��h}ui��i�yj
+2k!=k7_k:�kq�k�Dl�#m��m�?n$oo)p��p�9qZ�qAJr�r=�r1�r�s��s/7tAgtd�tDuPSu��u�Kv��v>�w2�wyxG~x��x�dyX�yzFz��z�`{t#|��|AY}{�}_�w�:�(���(�xɅ�B�φ-�o����Y*����o&�g���������]q�`ϐz0����[g�vÒ.:�-i�A��q٘�K�w�?��QП�"�a���,�L�2l�����B��Ģ�a�k���Y�N�i7�B��1�����r���9¨c��``����`x�<٪\�ys�a���O�T��>�Tí]�=v���$ή3�J'��r�L�WO�@����Rv�`ɱT*�`�]��>�y��U:�@��\ѴU.�]�����d�l�~��X�ra�DԸ�K�4i�J����Zm�cȺ8,�ge�TͻH"�Ck�o����gϽu7�l�����Ŀ�q�`��8`�W������t��!�s���'�m�������:F����a�^f�W��E��c����K�����w�o��G�TN�����O�`&�K������f�M��W;�d�����`����!��������"����l���"����.}�����<�l���E�l��ZZ����!z�����(���m��T?�=�����r]�m��c>��������T����?�����Jw�&��|���f��	�����>�}���@�����x��C�6��x�|{�3��D,�eq����T�����Vh�����H�]���3��������F�d��d:�N��f��LU����6<�Ns�����o�p������y���
�����D�x��?W�<�����T��������7����z�����D�P�h'7�8���������cBy!�B�M9f��i��e.K+��x�1����+^�*$7�u�`S%zC�W������3Bs
�J�_->w'��	��2!��X8�@g��t�- �5��
+Kk9�4b�"�JCI��E�@}�?Z�!0pj�2�GrH�����d��.���{�/&���Q)$&�0��nH7Y���>~�m4��� �6�A�A;�<�Ml,:���c�5=aF���P((/*��L�v]��,�%����IL
+�R�6qD����T��y�h�|U"N�#���81���D��?����F)���<
�[B	G=��#����3O\oE;'�V:��
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+ %d in %s:  %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+'%s' clashes with '%s''%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix; however:
+<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+Authenticating %s ...
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NamePackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want Processing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Version[default=N][default=Y][no default]archive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerbroken due to postinst failurecan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)couldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdivert-to may not contain newlinesdiverted by %s to: %s
+done
+duplicate path %sduplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror opening conffiles fileerror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to stderr, discovered before conffile promptfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to write details of '%.50s' to '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefork failedillegal package name at line %d: %.250sinstalledinvalid integer for --%s: '%.250s'link %s is both primary and slavelocally diverted to: %s
+maintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentspackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage diverts others to: %s
+package may not contain newlinespackage name has characters that aren't lowercase alphanums or '-+.'part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepassed
+pre-dependency problem - not installing %.250spriority must be an integerread error in %.250sread error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package filerename involves overwriting '%s' with
+  different file '%s', not allowedrequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave link same as main link %ssource file '%.250s' not a plain filestatoverride file contains empty linestripping trailing /subprocess %s returned error exit status %dtarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upunable to (re)open input part file '%.250s'unable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close updated status of '%.250s'unable to create '%.255s'unable to delete control info file '%.250s'unable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to read depot directory '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to seek to start of %.250s after paddingunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to stat %s '%.250s'unable to stat '%.250s'unable to stat current installed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to truncate for updated status of '%.250s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywarningyou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:50+0200
+Last-Translator: Khoem Sokhem <khoemsokhem@khmeros.info>
+Language-Team: Khmer <support@khmeros.info>
+Language: km
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=1; plural=0;
+X-Generator: KBabel 1.11.2
+
+ឯកសារ​កំណត់​រចនាសម្ព័ន្ធ `%s' មិនមាន​នៅ​ក្នុង​ប្រព័ន្ធ ។
+ឥឡូវ​កំពុង​ដំឡើង​ឯកសារ​កំណត់​រចនាសម្ព័ន្ធ ដូច​ដែល​អ្នក​​ស្នើ ។
+     កំណែ​នៅ​ក្នុង​កញ្ចប់​គឺ​ដូចគ្នា​នឹង​កំណែ​ដំឡើង​ចុង​ក្រោយ ។
+     មិនមែ​នជា​ឯកសារ​អត្ថបទ​ធម្មតា          %.255s
+  %.250s (កំណែ %.250s) ត្រូវតែ​បាន​ដំឡើង ។
+  %.250s គឺជា %s ។
+  %.250s ត្រូវ​តែ​បាន​ដំឡើង ប៉ុន្តែ​គឺ​ជា​កំណែ %.250s ។
+  %.250s មិន​ត្រូវ​បាន​ដំឡើង ។
+  %.250s ត្រូវតែបានកំណត់រចនាសម្ព័ន្ធ ។
+  %.250s ត្រូវ​តែ​បាន​ដំឡើង ប៉ុន្តែ​គឺ​ជា​កំណែ %.250s ។
+  %.250s មិន​ត្រូវ​បាន​យកចេញ​ទេ ។
+  %.250s ត្រូវ​បាន​ពន្លា ប៉ុន្តែ​មិន​ដែល​ត្រូវ​បាន​កំណត់​រចនាសម្ព័ន្ធ​ទេ ។
+  %.250s ត្រូវ​បាន​ពន្លា ប៉ុន្តែ​គឺ​ជា​កំណែ %.250s ។
+  %.250s កំណែ​ដែល​បាន​កំណត់​រចនាសម្ព័ន្ធ​ចុង​ក្រោយ​គឺ %.250s ។
+  %.250s ផ្ដល់ %.250s និង​ត្រូវតែ​បាន​ដំឡើង ។
+  %.250s ផ្ដល់ %.250s ប៉ុន្តែជា %s ។
+  %.250s ផ្ដល់ %.250s ប៉ុន្តែ​ត្រូវតែ​បាន​កំណត់​រចនាសម្ព័ន្ធ ។
+  %.250s ផ្ដល់ %.250s ប៉ុន្តែ​ត្រូវតែ​បាន​យក​ចេញ ។
+  កញ្ចប់ %s មិន​ត្រូវ​កំណត់​រចនាសម្ព័ន្ធ​នៅ​ឡើយ​ទេ ។
+  កញ្ចប់ %s មិនត្រូវ​បាន​ដំឡើង​នៅ​ឡើយ​ទេ ។
+  កញ្ចប់ %s ត្រូវតែបានយកចេញ ។
+  កញ្ចប់ %s ដែល​ផ្ដល់ %s មិន​ត្រូវ​បាន​កំណត់​រចនាសម្ព័ន្ធ​នៅ​ឡើយ​ទេ ។
+  កញ្ចប់ %s ដែល​ផ្ដល់ %s មិន​ត្រូវ​បាន​ដំឡើង​នៅ​ឡើយ​ទេ ។
+  កញ្ចប់ %s ដែល​ផ្ដល់ %s ត្រូវតែ​បាន​យកចេញ ។
+  កំណែ​របស់ %s នៅ​លើ​ប្រព័ន្ធ​គឺ %s ។
+ %d នៅក្នុង %s ៖  %s (មិនមែន​ជា​ឯកសារ​អត្ថបទ​ធម្មតា)
+ ==> រក្សាទុក​ឯកសារ​កំណត់​រចនាសម្ព័ន្ធ​ចាស់​ជា​លំនាំដើម ។
+ ==> អ្នក​ចែកចាយ​កញ្ចប់​បាន​បញ្ជូន​កំណែ​ដែល​បាន​ធ្វើ​ឲ្យ​ទាន់​មួយ ។
+ ==> ​ប្រើ​ឯកសារ​ចាស់​បច្ចុប្បន្ន​ដូច​ដែល​អ្នក​បាន​ស្នើ ។
+ ==> ប្រើ​ឯកសារ​កំណត់​រចនា​ស​ម្ព័ន្ធ​ថ្មី​ជា​លំនាំដើម ។
+ ==> ​ប្រើ​ឯកសារ​ថ្មី​ដូច​ដែល​អ្នក​បាន​ស្នើ ។
+ សកម្មភាព​លំនាំដើម​គឺ​ត្រូវ​ដំឡើង​កំណែ​ថ្មី ។
+ សកម្មភាព​លំនាំដើម​គឺ​ត្រូវ​រក្សា​កំណែ​បច្ចុប្បន្ន​របស់​អ្នក ។
+និង អាស្រ័យ​លើ​%s (ដំណើរ​កា​រ​រង​) ៖ %s
+`%s' ប៉ះអង្គិច​ជា​មួយ `%s'វាល `%s' ឈ្មោះ​កញ្ចប់​មិន​ត្រឹមត្រូវ `%.255s' ៖ %sវាល `%s' ឈ្មោះ​កញ្ចប់​ដែល​បាត់ ឬ អ្វី​ដែលនៅសល់ ដែល​ឈ្មោះកញ្ចប់​ត្រូវបាន​រំពឹងទុកវាល `%s' សំអាងលើ `%.255s' ៖
+ `%c' ប្រើលែង​បាន ប្រើ `%c=' or `%c%c' ជំនួស​​​វិញវាល `%s' សំអាង​លើ `%.255s' ៖
+ ទំនាក់​ទំនង​កំណែ​មិនល្អ %c%cវាល `%s' សំអាងលើ `%.255s' ៖
+ ពិតជាដូចនឹងើ​លេខ​កំណែ​ទាំងស្រុង ផ្ដល់យោបល់​ឲ្យប្រើ `=' ជំនួសវិញវាល `%s' សំអាង​លើ `%.255s' ៖
+ តម្លៃ​កំណែ​ចាប់ផ្ដើម​ដោយ​គ្មាន​អក្សរ​ក្រ​ម​លេខ​ ​ស្នើឲ្យប​ន្ថែមចន្លោះវាល `%s' សំអាង​លើ `%.255s' ៖ កំណែ​មិន​បាន​បញ្ចប់វាល `%s' កំហុស​វាក្យ​សម្ព័ន្ធ​បន្ទាប់​ពី​យោង​លើ​កញ្ចប់ `%.255s'(ចំណាំ​ថា ការ​មិន​បង្ហាញ​របស់ %s ដែល​ត្រូវបាន​ជំនួស​ដោយ​ជោគជ័យ ។)
+(កំពុង​អាន​មូលដ្ឋាន​ទិន្នន័យ​ ... (គ្មាន​សេច​ក្តីពិពណ៌នា)​-%c ជម្រើស​មិន​យក​តម្លៃ-%c ជម្រើស​យក​តម្លៃ--%s --ការ​រង់ចាំមិន​ត្រូវការ​អាគុយម៉ង់​ដែល​គ្មាន​ជម្រើស--%s --រង្វិលជុំ ត្រូវការ​យ៉ាងហោចណាស់​​អាគុយម៉ង់​ផ្លូវ​មួ--%s ត្រូវការ <ឈ្មោះ>--%s ត្រូវការ <ឈ្មោះ> <ផ្លូវ>--%s ត្រូវការ​អាគុយម៉ង់​ឈ្មោះ​ឯកសារ .deb--%s ត្រូវការ​អាគុយម៉ង់ <ថត>--%s ត្រូវការ​អាគុយម៉ង់​តែ​មួយ--%s ត្រូវការ​ថត​គោលដៅ​មួយ ។
+ប្រហែល​ជា​អ្នក​កំពុង​ប្រើ dpkg --install ?--%s ត្រូវ​ការ​យ៉ាងហោច​ណាស់​អាគុយម៉ង់​ឯកសារ​ប័ណ្ណសារ​កញ្ចប់​មួយ--%s ត្រូវការ​យ៉ាងហោច​ណាស់​អាគុយម៉ង​ឈ្មោះ​កញ្ចប់​មួយ--%s ជម្រើស​មិន​យក​តម្លៃ--%s ជម្រើស​យក​តម្លៃ--%s ត្រូវការ​អាគុយម៉ង់​ច្រើន​បំផុត (.deb និង​ថត)--%s មិន​ត្រូវការ​អាគុយម៉ង់--%s ត្រូវការ​តែ​អាគុយម៉ង់​តែ​មួយ​ប៉ុណ្ណោះ (ឈ្មោះ​ឯកសារ .deb)--auto ត្រូវការ​អាគុយម៉ង់​ផ្នែក​ឯកសារ​ជាក់លាក់​មួយ--auto ត្រូវការ​ការ​ប្រើ​ជម្រើស --output--ការ​ប្រៀបធៀប​កំណែ​មាន​ទំនាក់ទំនង​មិន​ល្អ--ការ​ប្រៀបធៀប​កំណែ​ត្រូវការ​​អាគុយម៉ង់​បី ៖ <version> <relation> <version>--ការស្វែង​រក​យ៉ាងហោចណាស់​ត្រូវការ​អាគុយម៉ង់​លំនាំ​ឈ្មោះ​ឯកសារ​មួយ--split ត្រូវការ​អាគុយម៉ង់​ឈ្មោះ​ឯកសារ​ប្រភព--split ត្រូវការ​បុព្វបទ​ទិសដៅ និង​ឈ្មោះ​ឯកសារ​ប្រភព​យ៉ាង​ហោច​ណាស់​មួយ; ទោះ​ជា​យ៉ាងណា​ក៏ដោយ ៖
+<deb> ជាឈ្មោះឯកសាររបស់ប័ណ្ណសារទ្រង់ទ្រាយដេបៀន ។
+<cfile> គឺជាឈ្មោះរបស់សមាសភាគឯកសាររដ្ឋបាល ។
+<cfield> គឺជាឈ្មោះរបស់វាលនៅក្នុងឯកសារ `វត្ថុបញ្ជា' មេ ។
+
+កំពុងផ្ទៀងផ្ទាត់ភាពត្រឹមត្រូវ %s ...
+ពាក្យបញ្ជា ៖
+  -s|--split <file> [<prefix>]     បំបែកប័ណ្ណសារមួយ ។
+  -j|--join <part> <part> ...      តភ្ជាប់ផ្នែកចូលគ្នា ។
+  -I|--info <part> ...             បង្ហាញព័ត៌មានអំពីផ្នែកមួយ ។
+  -a|--auto -o <complete> <part>   ប្រមូលផ្នែកចូលគ្នាដោយស្វ័យប្រវត្តិ ។
+  -l|--listq                       រាយផ្នែកដែលមិនផ្គូផ្គង ។
+  -d|--discard [<filename> ...]    បោះបង់ផ្នែកដែលមិនផ្គូផ្គង ។
+
+សញ្ញា​ប្រមាណវិធី​ប្រៀបធៀប​សម្រាប់ --ប្របៀបធៀប​កំណែ​គឺ ៖
+  lt le eq ne ge gt       (ចាក់​ទុក​កំណែ​ទទេ​ជា​កំណែ​ទាប​ជាង​កំ​ណែណា​មួយ)
+  lt-nl le-nl ge-nl gt-nl (ចាត់​ទុក​កំណែ​ទទេ​ជា​កំណែ​ខ្ពស់​ជាង​កំណែ​ណា​មួយ)
+  < << <= = >= >> >       (សម្រាប់​តែ​ភាព​ឆបគ្នា​ជា​មួយ​វាក្យសម្ព័ន្ធ​ឯកសារ​វត្ថុ​បញ្ជា) ។
+
+ដេបៀន %s កំណែ %s ។
+ប័ណ្ណសារ​កញ្ចប់ `%s' របស់​ដេបៀន កំណែ​កម្មវិធី​ខាង​ក្រោយ %s ។
+កម្មវិធី​គ្រប់គ្រង​កញ្ចប់​ដេបៀន `%s' កំណែ %s ។
+ឧបករណ៍​តភ្ជាប់/​បំបែក​កញ្ចប់ `%s' របស់​ដេបៀន កំណែ %s ។
+បានលុប %s ។
+សេចក្តី​ពិពណ៌នាបាន​ជួប​ប្រទះ​កំហុស​ខណៈពេល​ដំណើ​ការ ៖
+ឯកសារ `%.250s' មិនមែន​ជា​ផ្នែក​របស់​ប័ណ្ណសារ​ច្រើន​ផ្នែកទេ ។
+វាក្យ​​សម្ព័​ន្ធទ្រង់ទ្រាយ ៖
+  ទ្រង់ទ្រាយ​គឺ​ជា​ខ្សែអក្សរ​ដែល​នឹង​ជា​លទ្ធផល​សម្រាប់​កញ្ចប់​នីមួយៗ ។ ទ្រង់ទ្រាយ
+  អាច​រួម​បញ្ចូល​លំដាប់​គេច​ខ្នាតគំរូ \n (newline), \r (carriage
+  return) ឬ \\ (plain backslash) ។ ព័ត៌មាន​កញ្ចប់​អាច​ត្រូវ​បាន​រួម​បញ្ចូល
+  ដោយ​បញ្ចូល​សេចក្តីយោង​អថេរ​ទៅ​វាល​កញ្ចប់​ដោយ​ប្រើ​វាក្យសម្ព័ន្ធ ${var[;width]}
+  ។ វាល​នឹង​ត្រូវបាន​តម្រឹម​ស្ដាំ​លុះត្រាតែ​ទទឹង​អវិជ្ជមាន ដែល
+  ករណី​តម្រឹម​ឆ្វេង​នឹង​ត្រូវបាន​ប្រើ ។
+កំពុង​ដំឡើង​កំណែ​ថ្មី​របស់​ឯកសារ​កំណត់​រចនាសម្ព័ន្ធ %s ...
+ឯកសារ​ឥត​បាន​ការ​សល់​នៅ​ជុំវិញ​ថត depot ៖
+មាន​ច្បាប់​ចម្លង​របស់​កញ្ចប់ %s ច្រើន​ជាង​មួយ​ត្រូវ​បាន​ពន្លា
+ នៅ​ក្នុង​ការ​រត់​នេះ !  កំណត់​រចនាសម្ព័ន្ធ​វា​តែម្ដង​ប៉ុណ្ណោះ ។
+ឈ្មោះកញ្ចប់ %s កំពុង​រង់ចាំ មិន​ប៉ះពាល់​វា ។  ប្រើ --force-ដើម្បី​បដិសេធ ។
+កញ្ចប់ %s ដែល​បាន​រាយ​ច្រើន​ជាង​មួយ ដំណើរ​ការ​តែម្ដង​ប៉ុណ្ណោះ ។
+កញ្ចប់ `%s' មិនមាន​ឯកសារ​ណាមួយ​ទេ (!)
+កញ្ច​ប់មិនត្រូវបានផ្គុំនៅឡើយទេ ៖
+ផ្នែក %d របស់​កញ្ចប់ %s បាន​រាយ (នៅ​តែ​ត្រូវការ ដំណើរ​ការ​​​ត្រូវ​​បាន​​ផ្អាក ​ពី​​ព្រោះ​​មា​ន​កំហុស​ជា​ច្រើន ។
+ព័ត៌មានដែលបានកត់ត្រាអំពី %s ពី %s ។
+ជំនួស​ព័ត៌មាន​កញ្ចប់​ដែល​មាន ដោយ​ប្រើ %s ។
+កំពុង​រៀបចំ %s (%s) ...
+កញ្ចប់ដូចខាងក្រោមនេះមានភាពរាយប៉ាយ ដោយសារតែមានបញ្ហាធ្ងន់ធ្ងរកំឡុងពេលដ
+ដំឡើង ។  ពួកគេត្រូវតែដំឡើងឡើងវិញសម្រាប់ពួកវា (និងកញ្ចប់មួយចំនួន
+ដែលអាស្រ័យលើពួកវា) ដើម្បីធ្វើឲ្យវាមានមុខងារយ៉ាងត្រឹមត្រូវ ៖
+កញ្ចប់​ដូច​ខាង​ក្រោម​នេះ​ត្រូវ​បាន​កំណត់​រចនាសម្ព័ន្ធ​តែ​ពាក់​កណ្ដាល​ប៉ុណ្ណោះ ប្រហែល​ជា​ដោយ​សារ​តែ​មាន​បញ្ហា
+ពេល​កំណត់​រចនាសម្ព័ន្ធ​ពួក​វាជា​លើក​ដំបូង ។  ការ​កំណត់​រចនាសម្ព័ន្ធ​គួរ​តែត្រូវ​បាន​ទាញយក ដោយ​ប្រើ
+dpkg --កំណត់​រចនាសម្ព័ន្ធ <package> ឬ​ជម្រើស​ម៉ឺនុយ​កំណត់​រចនាសម្ព័ន្ធ​មិន​បាន​ជ្រើស ៖
+កញ្ចប់​ដូច​ខាង​ក្រោម​ត្រូវ​បាន​ដំឡើង​តែ​ពាក់​កណ្ដាល​ប៉ុណ្ណោះ ដោយ​សារតែ​មាន​បញ្ហា​កំឡុង​ពេល
+ដំឡើង ។. ការ​ដំឡើង​អាច​ប្រហែល​ជា​ត្រូវ​បាន​បញ្ចប់​ដោយ​ទាញ​យក​វា;
+កញ្ចប់​អាច​ត្រូវ​បាន​យក​ចេញ​ដោយ​ប្រើ មិន​ជ្រើសtឬr dpkg -យកចេញ ៖:
+កញ្ចប់​ដូច​ខាង​ក្រោម​នេះ​ត្រូវ​បាន​ពន្លា ប៉ុន្តែ​មិន​ត្រូវ​បាន​កំណត់​​រចនាស​ម្ព័ន្ធ​​នៅ​ឡើយ​ទេ ។
+ពួក​វា​ត្រូវតែ​បាន​កំណត់​រចនាសម្ព័ន្ធ​ដោយ​ប្រើ dpkg --កំណត់​រចនាសម្ព័ន្ធ ឬ
+ជម្រើ​ម៉ឺនុយ​កំណត់​រចនាសម្ព័ន្ធ​មិន​បាន​ជ្រើស​សម្រាប់​ឲ្យ​ពួកវា​ដំណើរ​ការ ៖
+វាយ `exit' នៅ​ពេល​ដែល​អ្នក​បាន​ធ្វើ​រួចរាល់ ។
+វាយ dpkg-deb --help សម្រាប់​ជា​ជំនួយ​អំពី​ការ​គណនា​ឯកសារ *.deb
+វាយ dpkg --help សម្រាប់​ជា​ជំនួយ​អំពី​ការដំឡើង និង​មិន​ដំឡើង​កញ្ចប់ ។វាយ dpkg-split --help សម្រាប់​ជា​ជំនួយ ។ធ្វើ​ឲ្យ​ព័ត៌មាន​កញ្ចប់​ដែលមាន​ទាន់​សម័យ ដោយ​ប្រើ %s ។
+របៀប​ប្រើ ៖ %s [<ជម្រើស> ...] <ពាក្យបញ្ជា>
+
+កំណែ[លំនាំដើម​=N][លំនាំដើម​=Y][គ្មាន​លំនាំ​ដើម​]ប័ណ្ណសារ​​បាន​ផ្ទុក​វត្ថុ `%.255s' នៃ​ប្រភេទ​ដែល​មិន​ស្គាល់ 0x%xប័ណ្ណសារ​គ្មាន​បន្ទាត់​ថ្មី​នៅ​ក្នុង​បឋមកថាបាន​ខូច​ដោយ​សា​រតែ​បាន​បរាជ័យ​ក្នុង​ការ​ដំឡើង​​ជាមុនមិន​អាច​ផ្គូផ្គង​ឯកសារ​ព័ត៌មាន​កញ្ចប់ `​%.255s' បានទេមិន​អាច​យក​ស្គ្រីប postrm ចាស់​ចេញ​បាន​ទេមិន​អាច​ចាប់ផ្ដើម​ឯកសារ​ព័ត៌មាន​កញ្ចប់ `%.255s' បាន​ទេមិន​អាច​បើក `%.255s' (នៅ​ក្នុង `%.255s')មិន​អាច​បើក​ឯកសារ​ផ្នែក​ប័ណ្ណសារ `%.250s'មិន​អាច​អាន​ថត​ព័ត៌មានមិន​អាច​យក `%.250s' ចេញមិន​អាច​យក​ឯកសារ​កំណត់​រចនាម្ព័ន្ធ​បម្រុង​ទុក​ចាស់`%.250s' (នៃ `%.250s') ចេញ​បាន​ទេមិន​អាច​យក​ឯកសារ​កំណត់​រចនាសម្ព័ន្ធ​ចាស់ `%.250s' (= `%.250s') ចេញមិន​អាច​យក​បញ្ជី​ឯកសារ​ចាស់​ចេញ​បាន​ទេមិន​អាច​ធ្វើ​ឲ្យ​ភាព​អាស្រ័យ​ពេញចិត្ត សម្រាប់ %.250s (ចង់​បាន​អាស្រ័យ​ដោយ %.250s)មិន​អាច​ស្កេន​ថត `%.255s'មិន​អា​ចវិ​ភាគ​រកថតដែលទាន់សម័យ `%.255s'មិន​អាច​ចាប់ផ្ដើម `%.255s' (នៅ​ក្នុង `%.255s')តួអក្សរ​ `%c' មិន​បានអនុញ្ញាត​ (បាន​តែ​អក្សរ​, តួលេខ​ និង​តួអក្សរ​ `%s')conffile `%.250s' មិន​បង្ហាញ​នៅ​ក្នុង​កញ្ចប់conffile `%.250s' មិន​ស្ថិតស្ថេរសកម្មភាព​ប៉ះទង្គិច​ -%c (--%s) និង​ -%c (--%s)ប៉ះទង្គិចការបង្វែរដែលពាក់ព័ន្ធនឹង `%.250s' ឬ `%.250s'ការ​ប៉ះទង្គិច​កញ្ចប់ - មិន​ដំឡើង %.250sថត​វត្ថុបញ្ជា​មាន​សិទ្ធិ​មិន​ល្អ %03lo (ត្រូវ​តែ >=0755 និង <=0775)មិនអាចបើក​ `%i' សម្រាប់​ស្ទ្រីម​បញ្ហា​ភាព​អាស្រ័យ - មិន​បាន​កំណត់​រចនាសម្ព័ន្ធបញ្ហា​ភាព​អាស្រ័យ - មិន​យក​ចេញបង្វែរ​មិន​អាច​មាន​បន្ទាត់​ថ្មីបាន​បង្វែរ​ដោយ %s ទៅ ៖ %s
+ធ្វើរួច​
+ស្ទួន​ផ្លូវ %sស្ទួន​តំណ​កូន​ចៅ %sតម្លៃ​ស្ទួ​នស​ម្រាប់វាល `%s'តម្លៃ​ស្ទួន​សម្រាប់​អ្នកប្រើ-វាល​ដែល​បាន​កំណត់ `%.*s'ខ្សែអក្សរទទេពីការអាន fgets conffilesសម័យ​ក្នុង​កំណែ​មិនមែន​ជា​លេខកំហុស​ក្នុង​ការ​បិទ %.250sកំហុស​ក្នុង​ការ​បិទ​ឯកសារ​កំណត់​រចនាសម្ព័ន្ធ `%.255s'កំហុស​ក្នុ​​ងការបិទ/សរសេរ `%.255s'កំហុស​ក្នុង​ការ​បង្កើត​ឧបករណ៍ `%.255s'កំហុស​ក្នុង​ការ​បង្កើត​ថត `%.255s'កំហុស​ក្នុង​ការ​បង្កើត​តំណរឹង `%.255s'កំហុស​ក្នុង​ការ​បង្កើត​បំពង់ `%.255s'កំហុស​ក្នុង​ការ​បង្កើត​តំណ​និមិត្ត​សញ្ញា `%.255s'កំហុស​ដើម្បី​ឲ្យ​ប្រាកដថា `%.250s' មិន​ទាន់​មានកំហុស​ក្នុង​ការ​បើក​ឯកសារ conffilesកំហុស​ក្នុង​ការ​អាន %.250sកំហុស​ក្នុង​ការ​អាន %s ពី​ឯកសារ %.255sកំហុស​ក្នុង​ការ​អាន​ឯកសារ conffilesកំហុស​ក្នុ​ងការ​អាន​ពី​បំពង់ dpkg-debកំហុស​ក្នុង​ការ​កំណត់​ភាព​ជា​ម្ចាស់​របស់ `%.255s'កំហុស​ក្នុង​ការ​កំណត់​ភាព​ជា​ម្ចាស់​របស់​តំណ​និមិត្ត​សញ្ញា `%.255s'កំហុស​ក្នុង​ការ​កំណត់​សិទ្ធិ​របស់ `%.255s'កំហុស​ក្នុង​ការ​កំណត់ត្រា​ពេល​វេលា​របស់ `%.255s'កំហុស​ក្នុង​ការ​ព្យាយាម​បើក %.250sកំហុស​ក្នុង​ការ​មិន​បាន​ចាប់​សញ្ញា %s ៖ %s
+កំហុស​​ក្នុង​ការសរសេរ `%s'់បាន​បរាជ័យ​ក្នុង chdir ទៅជា`%.255s'បាន​បរាជ័យ chdir ទៅ​ថតបាន​បរាជ័យ​ដើម្បី chroot ទៅ `%.250s'បាន​បរាជ័យ​ក្នុង​ការ​បិទ​បន្ទាប់​ពី​អាន ៖ `%.255s'បាន​បរាជ័យ​ក្នុង​ការ​បង្កើត​ថតបាន​បរាជ័យ​ក្នុង​ការ​បង្កើត​បំពង់បរាជ័យ​ dup សម្រាប់​ fd %dបានបរាជ័យ​ក្នុងការ​ចម្លង​សម្រាប់ std %sបាន​បរាជ័យ​ទៅ​នឹង​ប័ណ្ណសារ fstatបានបរាជ័យលើឯកសារបង្ខែរ fstatបានបរាជ័យលើឯកសារ fstat statoverrideបាន​បរាជ័យ​ក្នុង​ការ​បើក​ឯកសារ​បង្វែរបាន​បរាជ័យ​ក្នុង​ការ​បើក​ឯកសារ​ព័ត៌មាន​កញ្ចប់ `%.255s' ដើម្បី​អានបាន​បរាជ័យ​ក្នុង​ការ​បើក​ឯកសារ statoverrideបាន​បរាជ័យ​ក្នុង​ការ​អាន `%.255s' (នៅ​ក្នុង `%.255s')បាន​បរាជ័យ​ក្នុង​ការ​អាន​ប័ណ្ណសារ `%.255s'បាន​បរាជ័​យក្នុ​ងការយកឯ​កសារទា​ន់​សម័យ​ដែលបានចូលរួមចេញ %.255sបានបរាជ័យក្នុងការយកឯកសារទាន់សម័យផ្ទាល់ខ្លួនរបស់ខ្ញុំចេញ %.255sបានបរាជ័យក្នុងការសរសេរសេចក្ដីលម្អិតរបស់ `%.50s' ទៅ `%.250s'ឈ្មោះវាល `%.*s' ត្រូវតែបានអមដោយសញ្ញា (:)ឯកសារ `%.250s' ខូច - បាត់ %.250sឯកសារ `%.250s' ខូច - ឆេកសាំ MD5 មិនល្អ `%.250s'ឯកសារ `%.250s' ខូច -តួលេខមិនត្រឹមត្រូវ (កូដ %d) នៅក្នុង %sឯកសារ `%.250s' ខូច - មន្ដ​អាគម​មិន​ត្រឹមត្រូវ​នៅ​ចុង​បឋមក​ថា​ដំបូងឯកសារ `%.250s' ខូច - មន្ត​អាគមន​មិនល្អ​នៅចុង​បឋមកថា​ទីពីរឯកសារ `%.250s' ខូច - តួអក្សរ​ចន្លោះ​មិនល្អ (កូដ %d)ឯកសារ `%.250s' ខូច - បាត់​បន្ទាត់​ថ្មី​បន្ទាប់​ពី %.250sឯកសារ `%.250s' ខូច - nulls នៅ​ក្នុង​ផ្នែក​ព័ត៌មានឯកសារ `%.250s' ខូច - សមាជិក​ទីពីរ​មិនមែន​ជា​សមាជិក​ទិន្នន័យឯកសារ `%.250s' ខូច - ខុស​ទំហំ​សម្រាប់លេខ​ផ្នែក​ដែល​បានស្រង់ឯកសារ `%.250s' ខូច - ខ្លីពេកឯកសារ `%.250s' ខូច​ - ខុស​លេខ​នៃ​ទំហំ​ដែល​បានដកស្រង់ឯកសារ `%.250s' មិនមែន​ជា​ផ្នែក​ប័ណ្ណសារឯកសារ `%s' មិនមែន​ជា​ផ្នែក​ប័ណ្ណសារ
+ឯកសារ​មិន​អាច​មាន​បន្ទាត់ថ្មីឈ្មោះ​ឯកសារ "%s" មិន​ពេញលេញឯកសារ `%.250s' និង `%.250s' មិនមែន​ជា​ផ្នែក​របស់​ឯកសារ​ដូចគ្នា​ទេឯកសារ​រាយ​ឯកសារ​សម្រាប់​កញ្ចប់ `%.250s' ដែល​មាន​ឈ្មោះ​ឯកសារ​ទទេចម្លង​ខ្លួនឯ​ង​បាន​បរាជ័យឈ្មោះ​កញ្ចប់​មិន​ត្រឹមត្រូវ​នៅ​បន្ទាត់ %d ៖ %.250sបាន​ដំឡើង​ចំនួន​គត់​មិន​ត្រឹមត្រូវ​សម្រាប់ --%s: `%.250s'តំណ %s គឺ​ទាំង​មេ និង​កូនចៅបាន​បង្វែរ​ជា​មូលដ្ឋាន​ទៅ ៖ %s
+ស្គ្រីប​អ្នក​ថែទាំ `%.50s' មាន​សិទ្ធិ​មិន​ល្អ %03lo (ត្រូវតែ >=0555 និង <=0775)ស្គ្រីប​អ្នក​ថែទាំ `%.50s' មិនមែន​ជា​ឯកសារ​អត្ថបទ​ធម្មតា ឬតំណ​និមិត្ត​សញ្ញា​ទេស្គ្រីបអ្នកថែទាំ `%.50s' មិនស្ថិតស្ថេរមិន​អាច​ជា​ខ្សែអក្សរ​ទទេ​មិន​ផ្គូផ្គង​នៅ​ពេល​បង្វែរ
+  នៅ​ពេ​លយក `%s' ចេញ
+  រកឃើញ `%s'មិន​ផ្គូផ្គង​តាម​កញ្ចប់
+  នៅ​ពេលយក `%s' ចេញ
+  រកឃើញ `%s'ឈ្មោះ %s គឺ​ទាំង​មេ និង​កូនចៅត្រូវ​ការ​ជម្រើស​សកម្មភាព​មួយបន្ទាត់​ថ្មី​នៅ​ក្នុង​ឈ្មោះ​វាល `%.*s'បន្ទាត់​ថ្មី​បាន​ហាមឃាត់​ក្នុង​ឯកសារ​ជម្រើស​ធ្វើឲ្យ​ទាន់​សម័យ (%s)គ្មាន​ព័ត៌មាន​កញ្ចប់​នៅ​ក្នុង `%.255s'គ្មាន​កញ្ចប់​ដែល​មាន​ឈ្មោះ `%s' ត្រូវ​បាន​ដំឡើង​ទេ មិន​អាច​កំណត់​រចនា​សម្ព័ន្ធមិនបានដំឡើងមិន​បាន​ដំឡើង ប៉ុន្តែ​បាន​កំណត់​រចនាសម្ព័ន្ធគ្មាន​អ្វី​បន្ទាប់​ពី​សញ្ញា (:) នៅ​ក្នុង​លេខ​កំណែកំណែ​ចាស់​របស់​កញ្ចប់​មាន​ឈ្មោះ​ឯកសារ​ព័ត៌មាន​វែង​ពេក ដោយ​ចាប់ផ្ដើម​ដោយ `%.250s'បើក​សមាសភាគ​`%.255s' (នៅ %.255s)​ បានបរាជ័យ​តាម​វិធី​ដែលមិន​បាន​រំពឹង​ទុកអស់​សតិ​សម្រាប់​ការ​សម្អាត​ធាតុ​ថ្មីអស់​សតិ​សម្រាប់​ការ​សម្អាត​ធាតុ​ថ្មី​ដែលមាន​អាគុយម៉ង់ជា​ច្រើនកញ្ចប់ %.250s ត្រូវ​បាន​ដំឡើង និង​កំណត់​រចនាសម្ព័ន្ធ​រួច​ហើយកញ្ចប់ %.250s មិន​ទាន់​រួចរាល់ ដើម្បី​កំណត់​រចនាសម្ព័ន្ធ
+ មិន​អាច​កំណត់​រចនាសម្ព័ន្ធ (ស្ថានភាព​បច្ចុប្បន្ន `%.250s')ស្ថាបត្យកម្ម​កញ្ចប់ (%s) មិន​ផ្គូផ្គង​នឹង​ប្រព័ន្ធ (%s)កញ្ចប់​មាន​ឈ្មោះ​ឯកសារ​ព័ត៌មាន​វែងពេក (ចាប់​ផ្តើម​ `%.50s')ព័ត៌មាន​វត្ថុ​បញ្ជា​កញ្ចប់​មាន​ថត `%.250s'ព័ត៌មាន​វត្ថុបញ្ជា​កញ្ចប់ rmdir របស់ `%.250s' មិនបាន​ចែង​ថាជា​ថត​ទេកញ្ចប់​បង្វែរ​កញ្ចប់​ផ្សេង​ទៀត​ទៅ ៖ %s
+កញ្ចប់​មិនអាច​មាន​បន្ទាត់​ថ្មីឈ្មោះ​កញ្ចប់​មាន​តួអក្សរ​ដែល​មិនមែន​ជា​អក្សរ​ក្រម​លេខ​អក្សរតូច ឬ `-+.'បាត់​ផ្នែក %dផ្នែក​ឯកសារ `%.250s' មិនមែន​ជា​ឯកសារ​អត្ថបទ​ធម្មតា​ទេផ្នែក​ទំហំ​ធំ​ខ្លាំង​ណាស់ ឬ​មិនមែ​នជា​លេខ​វិជ្ជមានបានហុច
+បញ្ហា​ភាព​អាស្រ័យ​ជា​មុន - មិន​ដំឡើង %.250sអាទិភាព​ត្រូវតែ​ជា​ចំនួន​គត់អាន​កំហុស​នៅ​ក្នុង %.250sកំហុស​អាន​នៅ​ក្នុង​ឯកសារ​កំណត់​រចនាសម្ព័ន្ធ `%.255s'អាន​កំហុស​អំពី​ការ​បញ្ចូល​ជា​ខ្នាតគំរូអាន​កំហុស​នៅលើ​ stdin នៅ​ប្រអប់​បញ្ចូល conffileឯកសារ​កញ្ចប់​ដែល​បាន​ផ្ដុំឡើង​វិញប្ដូរ​ឈ្មោះ​ពាក់ព័ន្ធ​នឹង​ការ​សរសេរ​ជាន់​លើ `%s' ដោយ
+  ឯកសារ​ផ្សេង `%s' មិន​បាន​អនុញ្ញាតប្រតិបត្តិការ​​ដែ​លបាន​ស្នើ​ត្រូវការ​សិទ្ធិ​ជា​អ្នក​ប្រើ​ជាន់ខ្ពស់បានស្វែងរក ប៉ុន្តែរកមិនឃើញកញ្ចប់ (ការផ្គូផ្គងឯកសារ *.deb)រកឃើញ​ធាតុ​ព័ត៌មាន​កញ្ចប់​ជា​ច្រើន មាន​តែ​មួយ​ប៉ុណ្ណោះ​បាន​អនុញ្ញាតតំណ​កូនចៅ​ដូច​តំណ​មេ %sឯកសារ​ប្រភព `%.250s' មិនមែន​ជា​ឯកសារ​អត្ថបទ​ធម្មតាឯកសារ statoverride មាន​បន្ទាត់​ទទេស្នាម​ឆ្នូត​ /ដំណើរការ​រង %s បានត្រឡប់​កំហុស​ស្ថានភាព​ចេញ %dគោលដៅគឺជាថត - មិន​អាច​រំលង​ការ​ពិនិត្យ​ឯកសារ​វត្ថុ​បញ្ជាមាន​កំណែ​ជា​ច្រើន​របស់​ផ្នែក %d - យ៉ាង​ហោចណាស់ `%.250s' និង `%.250s'គ្មាន​ស្គ្រីប​នៅ​ក្នុង​កំណែ​ថ្មី​របស់​កញ្ចប់ - បោះបង់មិន​អា​ចបើក/បើក​ផ្នែក​ឯកសារ `%.250s' ឡើង​វិញ​បាន​ទេមិន​អាច​ពិនិត្យ​មើល​ភាព​មាន​ស្រាប់​របស់`%.250s'មិន​អាច​ពិនិត្យ​ភាព​មាន​ស្រាប់​របស់​ប័ណ្ណសារ `%.250s'មិន​អាច chown តំណ​និមិត្ត​សញ្ញា​ព័ត៌មាន​បម្រុង​ទុក​សម្រាប់ `%.255s'មិន​អាច​សម្អាត​ភាព​រាយប៉ាយ​នៅ​ជុំវិញ `%.255s' មុនពេល​ដំឡើង​កំណែ​ផ្សេងៗ​ទៀតមិនអាចបិទស្ថានភាពដែលបានធ្វើឲ្យទាន់សម័យរបស់ `%.250s'មិន​អាច​បង្កើត​ `%.255s'មិន​អាច​លុប​ឯកសារ​ព័ត៌មាន​វត្ថុ​បញ្ជា `%.250s'មិន​អាច​លុប​ឯកសារ depot `%.250s' ដែល​បាន​ប្រើ​បាន​ទេមិន​អាច​បោះបង់ `%.250s'មិនអាចបំពេញ %.250s ដោយចន្លោះមិន​អាច​បញ្ចូល %.250s បន្ទាប់​ពី​ចន្លោះមិន​អាច​បញ្ចូល​ស្ថានភាព​ដែលបាន​ធ្វើ​ឲ្យ​ទាន់សម័យ​របស់ `%.250s'មិន​អាច​ចូល​ទៅ​ឯកសារ​ប្រភព fstatមិនអាច fsync ស្ថានភាព​ដែលបានធ្វើឲ្យទាន់សម័យនៃ `%.250s' បានឡើមិន​អាច​ដំឡើង​ `%.250s' ជា​ `%.250s' បានទេមិន​អាច​ដំឡើង​ (សន្មតថា​) ឯកសារ​ព័ត៌មាន​ថ្មី​ `%.250s'មិន​អាច​ដំឡើង​ឯកសារ​ព័ត៌មាន​ថ្មី `%.250s' ជា `%.250s' បាន​ទេមិន​អាច​ដំឡើង​កំណែ​ថ្មី​របស់ `%.255s'មិនអាចដំឡើងស្ថានភាពដែលបានធ្វើឲ្យទាន់សម័យរបស់`%.250s'មិន​អាច​បង្កើត​តំណ​ព័ត៌មាន​បម្រុងទុក​របស់ `%.255s' មុន​ពេល​ដំឡើង​កំណែ​ថ្មីមិន​អាច​បង្កើត​តំណ​និមិត្ត​សញ្ញា​ព័ត៌មាន​បម្រុង​ទុក​សម្រាប់ `%.255s'មិន​អាច​ផ្លាស់ទី​ផ្នែក `%.255s' ដើម្បី​ដំឡើង​កំណែ​ថ្មីមិន​អាច​បើក​ឯកសារ depot `%.250s' ថ្មី​បាន​ទេមិន​អាច​បើក​ឯកសារ​លទ្ធផល `%.250s' បាន​ទេមិន​អាច​បើក​ឯកសារ​ប្រភព `%.250s'មិន​អាច​បើក​ថត​វត្ថុ​បញ្ជា temp បាន​ទេមិន​អាច​អាន​ថត depot `%.250s' បាន​ទេមិនអាច​អាន​ទង់​កម្មវិធី​ពណ៌នា​ឯកសារ សម្រាប់ %.250s បានឡើយមិន​អាច​អាន​តំណ `%.255s'មិន​អាច​អាន​ផ្នែក​ឯកសារ `%.250s'មិន​អាច​យក​កំណែ​របស់ `%.250s' ដែល​បាន​ស្រង់​ចេញ​ថ្មីៗ​ចេញ​បា​នទេមិន​អាច​យក​កំណែ​របស់ `%.250s' ដែល​បាន​ដំឡើង​ថ្មីៗ​ចេញ​បាន​ទេមិន​អាច​យក​កំណែ​របស់ `%.250s' ដែល​បាន​ដំឡើង​ថ្មីៗ​ចេញ​បាន​ទេ ដើម្បី​អនុញ្ញាត​ការ​ដំឡើង​ឡើងវិញ​របស់​ច្បាប់​ចម្លង​ព័ត៌មាន​បម្រុង​ទុកមិន​អាច​យក​ឯកសារ​ព័ត៌មាន​ដែល​លែង​ប្រើ​ចេញ `%.250s'មិន​អាច​ប្ដូរ​ឈ្មោះ​ឯកសារ depot `%.250s' ទៅ `%.250s' ថ្មី​បាន​ទេមិន​អាច​បើក​ផ្នែក​ឯកសារ `%.250s' ឡើង​វិញ​បាន​ទេមិន​អាច​ស្ដារ​កំណែ​ព័ត៌មាន​បម្រុង​ទុក​របស់ `%.250s' បាន​ទេមិន​អាច​ស្វែងរក​ដើម្បី​ចាប់ផ្ដើម %.250s បន្ទាប់​ពី​ចន្លោះមិនអាចកំណត់​ទង់​បិទនៅពេល​ប្រតិបត្តិ សម្រាប់​ %.250s បានឡើមិន​អាច​កំណត់​សិទ្ធិ​ប្រតិបត្តិ​នៅ​លើ `%.250s'មិន​អាច​ចាប់ផ្ដើម %s `%.250s'មិន​អាច​ចាប់ផ្ដើម `%.250s'មិនអាច​ថ្លែង conffile ដែលបាន​ដំឡើង​បច្ចុប្បន្ន `%.250s'មិន​អាច​ចាប់ផ្ដើម​ឯកសារ​ថ្មី​ផ្សេង​ទៀត​ទេ `%.250s'មិន​អាច​ចាប់​ផ្ដើម​ស្ដារ `%.255s' មុន​ពេល​ដំឡើង​កំណែ​ផ្សេងៗ​ទៀតមិនអាចកាត់ឲ្យខ្លីសម្រាប់ស្ថានភាពដែលបានធ្វើឲ្យទាន់សម័យរបស់`%.250s'មិន​អាច​សរសេរ​ស្ថានភាព​ដែល​បាន​ធ្វើឲ្យ​ទាន់សម័យ​របស់`%.250s'ទិន្នន័យ​ដែល​មិន​រំពឹងទុក បន្ទាប់​ពី​កញ្ចប់ និង​ជម្រើស​នៅ​បន្ទាត់ %dចុង​ឯកសារ​ដែល​មិន​រំពឹង​នៅ​ក្នុង %s ក្នុង %.255sចុង​បន្ទាត់​ដែល​មិន​រំពឹង​ទុក បន្ទាប់​ពី​ឈ្មោះ​កញ្ច​ប់នៅ​បន្ទាត់ %dចុង​បន្ទាត់​ដែល​មិន​រំពឹង​​ទុកក្នុង​ឈ្មោះ​កញ្ចប់​នៅ​បន្ទាត់ %dមិន​ស្គាល់​អាគុយម៉ង់​ `%s'មិនស្គាល់​ប្រភេទ​បង្ហាប់ `%s' !ជម្រើស​បង្ខំ/បដិសេធ​ដែល​មិនស្គាល់ `%.*s'មិន​ស្គា​ល់ជម្រើស -%cមិន​ស្គាល់​ជម្រើស --%sមិន​ស្គាល់​ស្ថានភាព​ដែល​ចង់​បាន​នៅ​បន្ទាត់ %d ៖ %.250sបាន​ពន្លា ប៉ុន្តែ​មិន​បាន​កំណត់​រចនាសម្ព័ន្ធថតភាព​ទាន់សម័យ​មានឯកសារ `%.250s' ដែលវាមានឈ្មោះវែងពេក (ប្រវែង=%d, អតិ=%d)ធ្វើ​ឲ្យទាន់សម័​យនូវថត​ដែ​លមានឯកសារ ដែលមានឈ្មោះប្រវែងខុសគ្នា (ទាំង %d និង %d)អ្នក​ប្រើ-ឈ្មោះ​វាល​ដែល​បាន​កំណត់ `%.*s' ខ្លី​ពេកខ្សែ​អក្សរ​កំណែ​បាន​បង្កប់​ចន្លោះខ្សែ​អក្សរ​កំណែ​គឺ​ទទេការ​ព្រមាន​អ្នក​ត្រូវតែ​បញ្ជាក់​កញ្ចប់​តាម​ឈ្មោះ​ផ្ទាល់​របស់​ពួកវា មិនមែន​តាម​សម្រង់​ឈ្មោះ​របស់​ឯកសារ​ដែល​ពួក​វា​មាន​ទេ
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/ko.gmo dpkg-1.20.7.1/po/ko.gmo
--- dpkg-1.20.7.1-orig/po/ko.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/ko.gmo	2021-06-09 18:25:15.147503722 -0500
@@ -0,0 +1,382 @@
+��L|�$(1?)1ai1=�1&	202-D3.r3�3.�3�3 �344S45o4-�4.�405135$e54�5/�5�5(6$06U6u6:�66�617197!k7(�7�7�7�7�7S8[8z8)�89�8.�8'%9&M9t93�95�9�9�9[:Uc:�:�:�:�:;;!;0;E;V;=e;R�;1�;'(<&P<(w<'�<+�<4�<!)=,K=9x=-�=�=#�=">$A>f>"�>�>!�>#�>2
+?1=?o?.�?�?-�?H�?QG@A�@e�@fAA7�A<�ABB0BsB�B
�B �B�B5�B1#CUCgC#�C!�C�C�CKD5LD-�D!�D�D-�D E5;EqE,�E.�E.�EFH4F6}F(�F>�F$G AGbGiGuG��G6H#CH-gH�H�H�H�H<�H�I�I[�IgJ
�K�L<�M.�MN0,N3]N1�N�N�N��N*�O2�O��OV�Q-�Q/R
IR]WR�R!�R�RG�R8:S,sS�S(�S�S�S�S:TVCT �T�T-�T	�TUU0UMU�TU�%V��V��W��X�LYu�Y&nZ{�Z[�0[ �[5�[,\$8\,]\�\u�\�]�]�]�]4^4;^p^�^6�^!�^	�^._,0_]_|_%�_�_%�_!`")`&L`s`�`;�`3�`a2aAMa�a&�a"�a�aEb,Tb"�b!�b5�b �bc-<c5jc,�cG�c$d:d7Sd�d*�d"�d�de)e?e"[e~e�e=�e*�eJfOf"af�f�f-�f)�f%g9g?g^gdgxg)�g�g�g!�g!h9h%Vh%|h'�h,�h�h*i?i!Tivi �i-�i#�i+j%2j$Xj}j �j�j�j:�jk8kTkqk$�k�k�k�k�k#l8lPl!pl:�l�l5�l "m2Cm%vm�m0�m*�m/n6HnVn<�n.o(Bo+ko)�o4�o4�o;+p<gp:�p7�p0q;Hq?�q$�qA�q$+r!Prrrc�r�r:s<Ms=�s�s�s$�s\t&lt&�t'�t �t'u4+u)`u�u	�uk�u/v$Gv#lv&�v!�v"�v^�v@[w�w%�w+�w7�w!5xWxqx�x�x�x�xO�x83y*ly�y�y�y�y7�y5zAz0az!�z�z�z5�z"{4@{
u{ �{%�{G�{P|Gc|?�|#�|7}+G}2s}Y�}f~&g~4�~F�~1
+;<x�.�.� �0�D=�����&��-Ӏ7�9�A�.G�v������Á)ځ�&!�H�a�Bs�H��&��0&�6W�4��
+Ã
+΃ك
+��%�%*�*P�{���+��+Ä!�$�46�Fk�@��,�R �'s�	��Z��4�25�h�D��GɇY�Qk�%��+�2�%B�%h�1��+��N�;�3U�*����5Ί$�2)�+\�+��,�����"�$9�^�*x���*��0�&�3B�4v�5��)�,�D8�*}�4��ݎ��&�#5�#Y�%}�(��.̏9��'5�*]�.����!Ԑ(��4�4T�[��,�4�#G�,k�"��"��/ޒ/�+>�+j�-��*ē&��1�P� h�2��0��&�B�#W�.{���Ǖ1���3,�`�*����Ŗ6ܖ&�.:�4i�1��+З���"1�T�h�{�(����SԘM(�(v�"��ڙ���`�`v�sך8K�n��P�/D�`t�0՞@�G�Db�4��8ܟK�.a�F��BנB�6]�M��9�W�Mt�$¢7�6�0V�*��K��R��KQ�E��3�6�N�g�����$��/ԥ�>#�Gb�B��A��;/�k�5��<����*�F1�9x���Ш,�)�<�)V�)��0��0۩-�`:�~��A�M\�L��M��LE�I��Pܬ=-�Hk�P��T�Z�$y���$���#�$�!B�#d�K��Pԯ'%�JM�%��D����~��E�qI����A>�H��(ɳl�!_�����$��'ɴL�O>�+��4��>�7.�.f�/��uŶ[;�M��%�(�K4�7��R��,�O8�Q��7ڹ<�WO�U��C��UA�:��>һ�
�&��;���+�48�m�}�����F�����.ξ������pf�B��?�9Z���;��8��F"�i�~���.��I����D��=4�Cr���e��5�E<���x��O�Ij�*��B��"�)�<�6I�5��5����W�X�&_�%��4��������������������Ja�-�����,}����?l�U��]�'`�O�������8v�
��
����F��F%�l���S��3��
'�H5�;~�,��5��<�8Z�L��=��8�BW�.��(��^��OQ�2��=��Y�0l�B��E��0&�_W�7��;��7+�@c�2����7��`(�@��h��63�2j�Y��B��0:�)k�.��+����%�<1�,n���d�� �o)��� �� ��+��>�GZ�B����)���1�2N�G��A��<�BH�C��?��F�<V�Q��M��93�@m�7��:��9!�<[�R��E��V1�B��E��B�;T�5��5��W��/T�;��2��-��4!�/V�,��"��"��?��=9�;w�=��K��1=�_o�3��A�;E�5��L��I�HN�]��{��jq�O��8,�9e�I��U��f?�f��f
�]t�U��[(�`��i��>O�m��=��::�.u�v��5�NQ�H��U��?�Z�8o�=��>��>%�7d�(��P��\�>s���	�����Cl�<��9��9'7a8���]Z�<�.P5=����7Ppb^�C2
v��1�H�?!aIz=� 8#L\,�d�;>X<�\�]1r�c	Af	R�	@�	A<
+w~
+~�
+>uF�a�J]s�0
M
Il
C�
1�
,_=�#�7�Ke]��E�"+N0e2�@�7
+TB�
�c�n(1�D�F[U��7�7%5]=��#�<�G94�4�X�SDF�C�r#@�	�o�QQM�3�k%]�w�ng9�>;OB�:�H	KRi�&G/:w(�@�.CKB�C�D*[2�9�<�,0 @] /� @� J!@Z!H�!N�!J3"4~"=�"S�"EE#K�#'�##�#7#$.[$.�$5�$6�$@&%Qg%<�%A�%P8&*�&=�&:�&8-'8f'n�'?(PN(A�(7�(5)8O)E�)F�)G*O]*7�*>�*N$+0s+4�+-�+;,TC,T�,>�,c,-.�-M�-0
.,>.:k.#�.D�.8/7H/+�/�/\�/L'0Et0Y�0U1=j1�1"�1)�12+2E2G`2)�2r�2WE3A�35�3'4:=4x44��4c#5�RK ���N�$��j�"u!���
+������\*���Q7*����=TJX/�O��ZfGC��;��k���o-��vh���E����[������$��5��m�p��K�	q�������"6�eZr������\(?�Y"@3���J;Bc�ts=BC��'�Hn]q>o.�+vO��w:�V�4UB/ ��g�K�28&)?W�H�j<����6�_�I#��:�%fY�S��5/�%
@��2,�~�T<|�%X������r}�1��3���!�W�2�MD*��x���`&G�}|�.'9�',D
+�
i�(�����L����������4S9��F��<I-��{A7~JRE��>9n5�a����D��E	{�����H�N�bb��Ua8�0����6�]���#�7�l8���;��G(AhA ���)p!Ld����0.w���Iz1����Ms
���:C��)���������_�uQ`+k�F�#����	y��@�������[>z��Ve���0�^$1cF&m�?
+��i�d^�3�l�y4P,���P��-�L=+�x�g�t��
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s depends on %s%s enhances %s%s pre-depends on %s%s recommends %s%s suggests %s%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s requires one or more part file arguments--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Alternative %s unchanged because choice %s is not available.Another process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+Authenticating %s ...
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Errors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Information about %d package was updated.
+Information about %d packages was updated.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+Leaving '%s'
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Nothing to configure.Package %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPriorityProcessing was halted because there were too many errors.
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Removing '%s'
+Replacing available packages info, using %s.
+SelectionSetting up %s (%s) ...
+Skip invalid line: %sSkip unknown alternative %s.StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use --help for help about querying packages.VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+[default=N][default=Y][no default]alternative link is not absolute as it should be: %salternative path is not absolute as it should be: %sany diversion of %sany diversion of %s to %sarchive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerauto modeawaiting trigger processing by another packagebroken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot divert file '%s' to itselfcannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')cannot stat file '%s'character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file contains %ccould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdiversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+dpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is not numbererrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror opening conffiles fileerror opening configuration directory '%s'error reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to '%s'error writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind trigger interest file '%.250s'failed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'fgets gave an empty string from '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefork failedformat version numbergenerated corrupt ar header for '%s'ignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!illegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal pending trigger name '%.255s': %sinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemanual modemaster filemaster linkmay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'multiple Conflicts and Replacesmultiple statoverrides present for file '%.250s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s contained list as info filepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage diverts others to: %s
+package file MD5 checksumpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepre-dependency problem - not installing %.250sprioritypriority must be an integerpriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package fileremoval of %.250sremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filestatoverride file contains empty linestatoverride file is missing final newlinestatusstripping trailing /subprocess %s returned error exit status %dsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving uptoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers looping, abandonedtrying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove backup copy of '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync file '%.255s'unable to sync file '%s'unable to truncate for updated status of '%.250s'unable to write file '%s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file while trying to read %sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?you must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-06-26 16:12+0200
+Last-Translator: Changwoo Ryu <cwryu@debian.org>
+Language-Team: Korean <debian-l10n-korean@lists.debian.org>
+Language: ko
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=1; plural=0;
+
+ 해결이 불가능한 패키지의 밀린 트리거:
+
+`%s' 설정 파일은 시스템에 없습니다.
+요청한대로 새로운 설정 파일을 설치합니다.
+     패키지 안에 있는 버전이 지난번 설치한 것과 같습니다.
+     일반 파일이 아닙니다      %.255s
+   어떻게 하시겠습니까? 다음 중에 하나를 선택할 수 있습니다:
+    Y 또는 I : 패키지 관리자의 버전을 설치합니다
+    N 또는 O : 현재 설치된 버전을 유지합니다
+       D     : 버전 간의 차이점을 표시합니다
+       Z     : 프로세스를 백그라운드로 하고 상황을 알아봅니다
+  %.250s 패키지(버전 %.250s)가 있고 %s.
+  %.250s 패키지(버전 %.250s)를 설치할 예정입니다.
+  %.250s 패키지는 %s.
+ %.250s 패키지는 설치되었지만, 버전이 %.250s입니다.
+  %.250s 패키지는 설치하지 않았습니다.
+  %.250s 패키지는 설정 해제할 예정입니다.
+ %.250s 패키지는 설치할 예정이지만, 버전이 %.250s입니다.
+  %.250s 패키지는 지울 예정입니다.
+  %.250s 패키지는 풀려있지만, 설정된 적이 없습니다.
+  %.250s 패키지는 풀려있지만, 버전이 %.250s입니다.
+  %.250s 패키지의 최근 설정된 버전은 %.250s입니다.
+  %.250s 패키지는 %.250s을(를) 제공하며 %s.
+  %.250s 패키지는 %.250s을(를) 제공하며 설치할 예정입니다.
+  %.250s 패키지는 %.250s을(를) 제공하지만 %s.
+  %.250s 패키지는 %.250s을(를) 제공하지만 설정 해제할 예정입니다.
+  %.250s 패키지는 %.250s을(를) 제공하지만 지울 예정입니다.
+%s (%s) %s을(를) 제공합니다.
+  %s 패키지는 트리거 처리를 기다립니다.
+ %s 패키지는 아직 설정하지 않았습니다.
+  %s 패키지는 설치하지 않았습니다.
+  %s 패키지는 지울 예정입니다.
+  %s 패키지는 (%s을(를) 제공) 트리거 처리를 기다립니다.
+  %s 패키지는 %s을(를) 제공하지만 아직 설정하지 않았습니다.
+  %s 패키지는 %s을(를) 제공하지만 설치하지 않았습니다.
+  %s 패키지는 %s을(를) 제공하지만 지울 예정입니다.
+  시스템에 있는 %s의 버전은 %s입니다.
+  설정하려고 하는 %s의 버전은 %s입니다.
+ 링크가 현재 없음 링크가 현재 %s 가리킴  슬레이브 %s: %s%2$s 안에 %1$d: 다음 섹션에서 패키지 %d개:%s(%s) %s을(를) 망가뜨리며 %s입니다.
+ %s (일반 파일이 아님)
+ ==> 기본값으로 기존 설정 파일을 유지합니다.
+ ==> 패키지 배포자가 업데이트한 버전을 넣었습니다.
+ ==> 요청한 대로 현재의 기존 파일을 사용합니다.
+ ==> 기본값으로 새로운 설정 파일을 사용합니다.
+ ==> 요청한 대로 새로운 파일을 사용합니다.
+패키지 %s: 구성 요소기본값으로 새로운 버전을 설치합니다.
+기본값으로 현재 버전을 그대로 유지합니다.
+ 그리고  패키지는 다음 패키지에 의존: 현재 %d개의 파일과 디렉터리가 설치되어 있습니다.)
+요청한 %d개의 컨트롤 컴포넌트가 없습니다%s (하위 프로세스): %s
+%s - 우선순위 %d%s 패키지는 %s 패키지를 망가뜨림%s 패키지는 %s 패키지와 충돌함%s 망가졌습니다: %s%s 패키지는 %s 패키지에 의존함%s 패키지는 %s 패키지를 개선함%s 패키지는 %s 패키지에 미리 의존함%s 패키지는 %s 패키지 설치를 추천함%s 패키지는 %s 패키지 설치를 제안%s: 설정 파일 '%.250s'은(는) (= '%s') 일반 파일이나 심볼릭 링크가 아닙니다%s: 설정 파일 '%.250s'의 파일 이름이 괴상하게 됩니다
+ ('%s'은(는) '%s'에 대한 심볼릭 링크입니다)%s: 설정 파일 '%s' 파일은 (= '%s') 순환
+ 링크입니다%s: 입력을 bzip2 스트림에 연결하는데 오류가 발생했습니다%s: 입력을 gzip 스트림에 연결하는데 오류가 발생했습니다%s: 출력을 bzip2 스트림에 연결하는데 오류가 발생했습니다%s: 출력을 gzip 스트림에 연결하는데 오류가 발생했습니다%s: '%.250s' 파일을 '%.250s'에 연결하는데 실패했습니다: %s%s: '%.250s' 파일을 제거하는데 실패했습니다 (덮어쓰기 전): %s%s: '%.250s' 파일을 제거하는데 실패했습니다: %s%s: 이전 백업 '%.250s' 파일을 지우는데 실패했습니다: %s%s: 오래된 배포 버전 '%.250s'을(를) 지우는데 실패했습니다: %s%s: '%.250s' 파일을 '%.250s' 파일로 이름 바꾸는데 실패했습니다: %s%s: 내부 bzip2 읽기 오류%s: 내부 bzip2 읽기 오류: '%s'%s: 내부 bzip2 쓰기 오류%s: 내부 bzip2 쓰기 오류: '%s'%s: 내부 gzip 읽기 오류%s: 내부 gzip 읽기 오류: '%s'%s: 내부 gzip 쓰기 오류%s: 내부 gzip 쓰기 오류: %s%s: 내부 gzip 쓰기 오류: '%s'%s: 설정 파일 '%s'에 (= '%s') 대해 readlink할 수
+ 없습니다: %s%s: 설정 파일 '%s' 파일의 (= '%s') 정보를 읽을 수
+ 없습니다: %s'%s'은(는) %s와(과) 충돌합니다'%s'에 사용자 정의 우선순위 값 '%s'이(가) 들어 있습니다'%s' 옵션은 인수가 없습니다`%s' 필드, 패키지 이름(`%.255s')이 잘못되었습니다: %s`%s' 필드, 패키지 이름이 들어가야 할 곳에 없는 패키지 이름 혹은 쓰레기 문자가 들어 있습니다.`%s' 필드, `%.255s' 참조:
+ `%c' 형식은 이제 안 씁니다. 대신에 `%c=' 혹은 `%c%c' 형식을 사용하십시오`%s' 필드, `%.255s' 참조:
+ 버전 관계(%c%c)가 틀렸습니다`%s' 필드, `%.255s' 참조:
+ 버전을 정확히 맞추려면 버전만 쓰지 말고 `='을 사용하십시오`%s' 필드, `%.255s' 참조:
+ 버전 값이 알파벳이나 숫자로 시작하지 않습니다, 공백을 추가하면 됩니다`%s' 필드, `%.255s' 참조: 버전이 끝나지 않았습니다`%s' 필드, `%.255s' 패키지 참조 후 구문 오류가 있습니다'%s' 옵션은 인수가 필요합니다(%s 패키지가 없어진 것에 유의하십시오. 완전히 다른 패키지로 대체되었습니다.)
+(데이터베이스 읽는중 ...(설명 없음), 메모리 덤프-%c 옵션은 인수가 없습니다-%c 옵션은 인수가 필요합니다--%s --pending에서는 옵션과 관계없는 인수를 받지 않습니다--%s --recursive 옵션은 적어도 하나의 경로 인수가 필요합니다--%s 옵션은 <이름>이 필요합니다.--%s 옵션은 <이름> <경로>가 필요합니다.--%s 옵션에는 .deb 파일 이름 인수가 필요합니다--%s 옵션은 <디렉터리> 인수가 필요합니다--%s 옵션은 <파일> 인수를 받습니다--%s 옵션은 인수를 하나만 받습니다--%s 옵션에는 대상 디렉터리가 필요합니다.
+혹시 dpkg --install을 하려고 했던 것 아닙니까?--%s 옵션은 적어도 하나의 패키지 아카이브 파일 인수가 필요합니다.--%s 옵션은 적어도 하나의 패키지 이름 인수가 필요합니다--%s 옵션은 인수가 없습니다--%s 옵션은 인수가 필요합니다--%s 옵션에는 한 개 이상의 구성 파일 인수가 필요합니다--%s 옵션은 최대 두 개의 인수를 받습니다--%s 옵션에는 최대 두 개의 인수를 받습니다 (.deb 및 디렉터리)--%s 옵션은 인수를 받지 않습니다--%s 옵션에는 오직 한 개의 인수만 받습니다 (.deb 파일 이름)--auto 옵션에는 정확히 한 개의 구성 요소 인수를 써야 합니다--auto 옵션에는 --output 옵션을 써야 합니다--compare-versions 옵션에 관계가 잘못되었습니다--compare-versions 옵션은 인수 세 개를 받습니다: <버전> <관계> <버전>--search 옵션은 적어도 하나의 파일 이름 패턴 인수가 필요합니다--split 옵션에는 소스 파일 이름 인수가 필요합니다--split 옵션에는 소스 파일 이름과 대상 접두어만 쓸 수 있습니다--update 옵션을 사용했지만 %s이(가) 없습니다--remove 명령에서는 --update 옵션이 무의미합니다.../%s: 하지만:
+tar -cf에서 압축<deb>는 데비안 형식 아카이브의 파일 이름입니다.
+<파일>은 관리 파일 구성 요소의 이름입니다.
+<필드>는 `control' 파일에 있는 필드의 이름입니다.
+<압축 풀기><link>와 <path>는 같을 수 없습니다<패키지 상태 및 진행 파일 디스크립터><표준 오류><표준 입력><표준 출력>'%s' 추가하는 중
+%s 대체 항목을 바꾸지 않습니다. %s 선택이 없습니다.다른 프로세스가 데이터베이스를 쓰기 용도로 잠궜습니다. 현재 데이터베이스를
+수정하고 있을 수도 있습니다. 다음 문제는 그래서 발생했을 수도 있습니다.
+%s 패키지를 확인하는 중입니다 ...
+명령어:
+  --check-supported                실행 중인 dpkg가 트리거를 지원하는 지
+                                   검사합니다.
+
+명령:
+  -s|--split <파일> [<접두어>]     아카이브를 나눕니다.
+  -j|--join <부분> <부분> ...      부분 부분을 합칩니다.
+  -I|--info <부분> ...             한 부분에 관한 정보를 표시합니다.
+  -a|--auto -o <전체> <부분>       각 부분을 자동으로 연결합니다.
+  -l|--listq                       안 맞는 부분을 표시합니다.
+  -d|--discard [<파일이름> ...]    안 맞는 부분을 버립니다.
+
+명령:
+  [--add] <파일>          전환 파일을 추가합니다.
+  --remove <파일>         전환 파일을 제거합니다.
+  --list [<글로브패턴>]   전환 파일 목록을 표시합니다.
+  --listpackage <파일>    어떤 패키지가 해당 파일을 전환하는지 표시합니다.
+  --truename <파일>       전환된 파일을 표시합니다.
+
+--compare-versions에서 사용하는 비교 연산자:
+  lt le eq ne ge gt       (버전이 없는 경우 항상 이전 버전으로 취급)
+  lt-nl le-nl ge-nl gt-nl (버전이 없는 경우 항상 이후 버전으로 취급)
+  < << <= = >= >> >       (control 파일의 형식과의 호환성을 위해서만 사용).
+
+데비안 '%s' 패키지 관리 쿼리 프로그램 버전 %s.
+데비안 %s 패키지 트리거 프로그램 버전 %s.
+데비안 %s 버전 %s.
+데비안 '%s' 패키지 아카이브 백엔드 버전 %s.
+데비안 '%s' 패키지 관리 프로그램 버전 %s.
+데비안 '%s' 패키지 나누기/합치기 프로그램. 버전 %s.
+%s 지웠습니다.
+설명희망상태=알수없음(U)/설치(I)/지우기(R)/깨끗이(P)/고정(H)
+| 상태=아님(N)/설치(I)/설정(C)/풀림(U)/절반설정(F)/일부설치(H)/트리거대기(W)/
+| /    트리거밀림(T)
+|/ 오류?=(없음)/다시설치필요(R) (상태, 오류가 대문자=불량)
+처리하는데 오류가 발생했습니다:
+`%.250s' 파일은 다중 구성 아카이브의 일부가 아닙니다.
+형식 사용법:
+  <형식>은 각 패키지에 대해 출력할 문자열입니다. 출력형식은 \n(줄바꿈), 
+  \r(캐리지 리턴), \\(일반 백슬래시) 등 표준 이스케이프 시퀀스를 사용할 수 
+  있습니다. 패키지 정보는 ${변수;폭} 형식으로 패키지 필드를 변수값으로 이용할
+  수 있습니다. 폭이 음수가 아니라면 변수는 오른쪽에 맞춰 정렬하고, 음수라면 
+  왼쪽으로 정렬합니다.
+%d개의 패키지에 대한 정보가 업데이트되었습니다.
+새 버전의 설정 파일 %s 설치하는 중입니다 ...
+저장 디렉터리 안에 쓸모없는 파일이 남았습니다:
+'%s'에서 나갑니다
+이번 실행할 때 %s 패키지를 두 번 이상 풀었습니다!
+설정은 한 번만 합니다.
+이름'%s' 전환 파일이 없으므로 아무것도 안 지웠습니다.
+설정할 것이 없습니다.%s 패키지는 고정 상태로 건드리지 않습니다.  무시하려면 --force-hold 옵션을 사용하십시오.
+%s 패키지가 두 번 이상 등장했습니다. 한 번만 처리합니다.
+`%s' 패키지에는 어떠한 파일도 들어 있지 않습니다. (!)
+아직 다시 합치지 않은 패키지:
+%2$s 패키지의 구성 요소 %1$d번 채움 (여전히 필요: 경로Pre-Depends 필드우선순위오류가 너무 많아 처리를 중단했습니다.
+%2$d개 구성 요소에서 %1$s 패키지 만들기:%2$s에서 %1$s에 관한 정보를 기록합니다.
+'%s' 지우는 중
+%s을(를) 사용하여 이용가능한 패키지 정보를 대체하는 중입니다.
+선택%s (%s) 설정하는 중입니다 ...
+잘못된 줄을 건너 뜁니다: %s알 수 없는 %s 대체 항목을 건너 뜁니다.상태다음 패키지는 다른 패키지에서 활성화한 트리거 처리를 기다리고 있습니다. 
+트리거 처리는 dselect 혹은 dpkg --configure --pending 명령으로 처리할
+수 있습니다. (혹은 dpkg --trigger-only):
+다음 패키지는 설치 도중에 발생한 심각한 문제로 손상되어 있습니다.
+제대로 동작하려면 패키지를 (그리고 여기에 의존하는 패키지도) 다시
+설치해야 합니다.
+다음 패키지는 일부만 설정되었습니다. 아마도 처음 설정할 때 문제가
+발생했을 것입니다. dpkg --configure <패키지>를 이용해 다시 설정을
+시도하거나 dselect에서 설정 메뉴 옵션을 사용해야 합니다.
+다음 패키지는 일부만 설치되었습니다. 아마도 설치할 때 문제가
+발생하였을 것입니다. 설치를 재시도하면 아마도 완료될 것입니다.
+dselect나 dpkg --remote를 사용하여 패키지를 지울 수도 있습니다:
+다음 패키지에 트리거가 걸려 있지만, 트리거 처리를 아직 하지 않았습니다.
+트리거 처리는 dselect 혹은 dpkg --configure --pending 명령으로 처리할
+수 있습니다. (혹은 dpkg --trigger-only):
+다음 패키지는 풀렸지만 아직 설정되지 않은 패키지입니다.
+dpkg --configure을 사용하여 설정하거나 혹은 dselect내의
+설정 메뉴 옵션을 이용하십시오:
+대체 항목 %2$s에 대해 (%3$s 제공) %1$d개 선택이 있습니다.%s 제공하는 프로그램이 없습니다.자유 소프트웨어입니다. 복사 조건에 관해서는 GNU General Public License
+version 2 이후를 보십시오. 어떤 보증도 하지 않습니다.
+다 끝나면 `exit'를 입력하십시오.
+*.deb 파일 조작에 관한 도움말을 보려면 dpkg-deb --help를 실행하십시오.
+패키지 설치와 설치 해제에 관한 도움말을 보려면 dpkg --help를 실행하십시오.도움말을 보려면 dpkg-split --help를 실행하십시오.이 프로그램의 도움말을 보려면 dpkg-trigger --help를 실행하십시오.%s을(를) 사용하여 이용가능한 패키지 정보를 업데이트하는 중입니다.
+사용법: %s [<옵션> ...] <명령>
+
+쿼리 프로그램에 대한 도움말은 --help 옵션을 사용하십시오.버전%s 기능을 지원하는 dpkg 버전이 아직 설정되지 않았습니다.
+ `dpkg --configure dpkg'를 사용하고 다시 시도해 보십시오.
+추가할 때는 --local와 --divert <원래파일>.distrib이 기본입니다.
+지울 때는 --package나 --local와 --divert 옵션을 사용했을 경우 항목이
+일치해야 합니다. 패키지의 preinst, postrm 스크립트는 언제나 --package와
+--divert 옵션을 지정하는 것이 좋습니다.
+[기본값=N][기본값=Y][기본값 없음]대체 항목 링크는 절대 경로여야 하지만 아닙니다: %s대체 항목 경로가 절대 경로여야 하지만 아닙니다: %s%s의 모든 전환%s의 %s(으)로 모든 전환아카이브 안의 `%.255s' 오브젝트의 타입이 알 수 없는 0x%x입니다아카이브의 헤더에 줄바꿈이 없습니다자동 모드다른 패키지에 의한 트리거 처리를 기다리는 중입니다지우기 혹은 설치 실패로 망가진 상태입니다postinst 실패로 망가진 상태입니다알 수 없는 %s 선택을 설치하지 않습니다패키지 정보 파일 `%.255s'에 mmap할 수 없습니다오래된 postrm 스크립트를 지울 수 없습니다패키지 정보 파일 `%.255s'의 파일 정보를 읽을 수 없습니다'%s' 파일을 해당 파일로 전환할 수는 없습니다`%.255s' 파일을 열 수 없습니다 (`%.255s'에서)아카이브 구성 요소 `%.250s' 파일을 열 수 없습니다정보 디렉터리를 읽을 수 없습니다`%.250s'을(를) 지울 수 없습니다오래된 백업 설정 파일 `%.250s' 파일을 지울 수 없습니다 (`%.250s'의 백업)과거의 설정 파일 `%.250s' (= `%.250s') 파일을 지울 수 없습니다오래된 파일 목록을 지울 수 없습니다'%s' 파일의 이름을 '%s'(으)로 바꿀 수 없습니다%.250s에 대한 미리 의존을 만족시킬 수 없습니다 (%.250s 때문에 필요)`%.255s' 디렉터리를 읽을 수 없습니다업데이트 디렉터리 `%.255s'을(를) 읽을 수 없습니다`%.255s' 파일의 정보를 읽을 수 없습니다 (`%.255s'에서)'%s' 파일의 정보를 읽을 수 없습니다`%c' 문자는 사용할 수 없습니다(글자, 숫자, 그리고 %s만 쓸 수 있습니다)`%.250s' 설정 파일이 패키지 안에 없습니다`%.250s' 설정 파일의 정보를 읽을 수 없습니다'%.250s' 설정 파일이 일반 파일이 아닙니다설정 파일의 이름 '%s' 끝에 공백문자가 있습니다'%s' 설정 파일 이름이 중복되었습니다설정 오류: %s:%d: %s-%c(--%s) 명령과 -%c(--%s) 명령은 충돌합니다전환 파일과 관련해 발생한 충돌이 `%.250s' 혹은 `%.250s'에 관련되었습니다패키지 충돌 - %.250s 패키지를 설치하지 않습니다컨트롤 디렉터리의 권한이 잘못되었습니다 : %03lo (>=0755 및 <=0775이어야 합니다)컨트롤 디렉터리가 디렉터리가 아닙니다control 파일에 %c 문자가 들어 있습니다오래된 파일 '%.250s'의 정보를 읽을 수 없으므로 지우지 않습니다: %s`%i' 파일디스크립터를 스트림으로 열 수 없습니다의존성 문제 - 설정하지 않고 남겨둠의존성 문제 - 지우지 않습니다%2$s 패키지가 %1$s 패키지에서 전환
+%2$s 패키지가 %1$s 패키지로 전환
+%s의 전환, %s 패키지%s의 %s(으)로 전환, %s 패키지<전환할파일>에는 줄바꿈이 있으면 안 됩니다%s 패키지가 이 패키지를 전환: %s
+완료
+dpkg가 설치되지 않은 것으로 나옵니다. %s 기능 지원을 검사할 수 없습니다!
+대기 트리거 중복 `%.255s'`%.250s' 파일 이름 및 `%.250s' 패키지에 대한 파일 트리거 관심 파일이 중복되었습니다중복된 경로 %s밀린 트리거 중복 `%.255s'중복된 슬레이브 링크 %s`%s' 필드의 값이 중복되었습니다사용자 정의 필드 `%.*s'의 값이 중복되었습니다정보 파일을 읽는 fgets에서 빈 문자열을 리턴했습니다빈 문자열은 트리거 이름으로 사용할 수 없습니다epoch버전의 epoch가 숫자가 아닙니다오류'%s' 검사하는데 오류가 발생했습니다%.250s을(를) 닫기 오류가 발생했습니다설정 파일 `%.255s' 파일을 닫는데 오류가 발생했습니다`%.255s'을(를) 닫는데/쓰는데 오류가 발생했습니다`%.255s' 장치를 만드는데 오류가 발생했습니다`%.255s' 디렉터리를 만드는데 오류가 발생했습니다`%.255s' 하드 링크를 만드는데 오류가 발생했습니다`%.255s' 파이프를 만드는데 오류가 발생했습니다`%.255s' 심볼릭 링크를 만드는데 오류가 발생했습니다`%.250s' 파일을 지우는데 오류가 발생했습니다훅 프로그램 '%s'의 실행에 오류가 발생했습니다. 종료 코드 %d문자열을 varbuf 변수로 포매팅하는데 오류가 발생했습니다conffile 파일을 여는데 오류가 발생했습니다%s 설정 디렉터리를 닫는데 오류가 발생했습니다%.250s 파일을 읽는데 오류가 발생했습니다%2$.255s에서 %1$s 읽기에 오류가 발생했습니다conffile 파일을 읽는데 오류가 발생했습니다dpkg-deb 파이프에서 읽기 오류가 발생했습니다트리거가 전환한 파일을 (`%.250s') 읽는데 오류가 발생했습니다`%.255s'의 소유권을 설정하는데 오류가 발생했습니다`%.255s' 심볼릭 링크의 소유권을 설정하는데 오류가 발생했습니다`%.255s'의 권한을 설정하는데 오류가 발생했습니다`%.255s' 타임스탬프 설정하는데 오류가 발생했습니다%.250s을(를) 열기 시도하는데 오류가 발생했습니다%s 시그널을 잡는데 오류가 발생했습니다: %s
+`%s' 파일을 쓰는데 오류가 발생했습니다'%s' 파일에 쓰는데 오류가 발생했습니다표준 오류에 쓰는데 오류, 설정 파일 프롬프트 전에 발생했습니다메모리를 할당하는데 실패했습니다`%.255s' 디렉터리로 이동하는데 실패했습니다디렉터리로 이동하는데 실패했습니다`%.250s'(으)로 chroot가 실패했습니다읽기 후에 닫는데 실패했습니다: `%.255s'디렉터리를 만드는데 실패했습니다파이프를 만드는데 실패했습니다fd %d에 dup이 실패했습니다std%s에 dup이 실패했습니다ar 멤버 파일의 정보를 읽는데 실패했습니다 (%s)아카이브 파일의 정보를 읽는데 실패했습니다diversions 파일의 정보를 읽는데 실패했습니다statoverride 파일의 정보를 읽는데 실패했습니다읽기를 위해 '%.255s' 설정 파일을 여는데 실패했습니다: %sdiversions 파일을 여는데 실패했습니다읽기 작업을 위해 패키지 정보 파일 `%.255s' 파일을 여는데 실패했습니다statoverride 파일을 여는데 실패했습니다트리거 관심 목록 파일을 (`%.250s') 열 수 없습니다`%.255s' 파일을 읽을 수 없습니다 (`%.255s'에서)`%.255s' 아카이브를 읽는데 실패했습니다합병한 업데이트 파일 %.255s을(를) 지우는데 실패했습니다자체 업데이트 파일 %.255s을(를) 지우는데 실패했습니다트리거 관심 파일을 (`%.250s') 되돌리는데 실패했습니다심볼릭 링크 `%.250s'에 stat을 실행할 수 없습니다(참조하지 못했습니다)`%2$.250s' 심볼릭 링크의 새 목적지 `%1$.250s'에 stat을 실행할 수 없습니다(참조하지 못했습니다)'%3$.250s' 파일에 `%2$.50s'에 관한 %1$s 데이터베이스 레코드를 쓰는데 실패했습니다`%2$.250s' 파일에 `%1$.50s'에 관한 정보를 쓰는데 실패했습니다`%.250s'에서 fgets한 결과가 빈 문자열입니다필드 이름 `%.*s' 뒤에는 콜론이 와야 합니다`%.250s' 파일이 손상되었습니다 - %.250s이(가) 빠졌습니다`%.250s' 파일이 손상되었습니다 - MD5 체크섬(`%.250s')이 틀렸습니다`%1$.250s' 파일이 손상되었습니다 - %3$s에서 숫자가 잘못되었습니다 (코드 %2$d).`%.250s' 파일이 손상되었습니다 - 첫번째 헤더의 끝에 버전 번호가 틀렸습니다`%.250s' 파일이 손상되었습니다 - 두 번째 헤더의 끝에 매직이 잘못되었습니다`%.250s' 파일이 손상되었습니다 - 채움 문자가 잘못되었습니다 (코드 %d)`%.250s' 파일이 손상되었습니다 - %.250s 다음에 줄바꿈이 없습니다`%.250s' 파일이 손상되었습니다 - info 섹션에 널 문자가 들어 있습니다`%.250s' 파일이 손상되었습니다 - 두 번째 멤버가 데이터 멤버가 아닙니다`%.250s' 파일이 손상되었습니다 - 지정한 번호의 구성 요소의 크기가 틀렸습니다`%.250s' 파일이 손상되었습니다 - 너무 짧습니다`%.250s' 파일이 손상되었습니다 - 지정한 크기에 대해 구성 요소 개수가 틀렸습니다`%.250s' 파일이 아카이브 구성 요소가 아닙니다`%s' 파일은 아카이브 구성 요소가 아닙니다
+파일에 줄바꿈이 있으면 안 됩니다파일 트리거 기록의 패키지 이름이 (`%.250s') 잘못되었습니다 (`%.250s' 파일 관심에서): %.250s"%s" 파일의 이름은 절대적이지 않습니다`%.250s' 및 `%.250s' 파일은 같은 파일의 구성 요소가 아닙니다`%.250s' 패키지의 파일 목록에 빈 파일 이름이 있습니다'%.250s' 패키지의 파일 목록 파일에 마지막 줄 바꿈이 빠졌습니다fork가 실패했습니다포맷 버전 번호'%s'에 대해 생성한 ar 헤더가 망가졌습니다컨트롤 파일과 관련된 %d개 경고를 무시합니다문제 무시, 어쨌든 계속 진행할 수도 있습니다!충돌 무시, 어쨌든 계속 진행할 수도 있습니다!%s 패키지의 의존성 문제를 무시합니다:
+%s미리 의존 문제를 무시합니다!%d번째 줄에 사용할 수 없는 패키지 이름이 나왔습니다: %.250s대기 트리거 `%.255s'에서 사용할 수 없는 패키지 이름이 나왔습니다: %s밀린 트리거 이름(`%.255s')이 잘못되었습니다: %s`%.255s' 설치설치함%.250s 설치하시면 %.250s을(를) 망가뜨릴 수 있으며, 설정
+해제를 할 수도 없습니다(--auto-deconfigure이 도움될 수도 있습니다)%.250s 설치하시면 기존 소프트웨어를 망가뜨립니다리비전 번호에서 쓸 수 없는 문자가 있습니다버전 번호에서 쓸 수 없는 문자가 있습니다-%c 옵션에 압축 단계가 잘못되었습니다: %ld-%c 옵션에 숫자가 잘못되었습니다: '%.250s'--%s 옵션에 숫자가 잘못되었습니다: `%.250s'트리거 이름 `%.250s'에서 문법이 잘못되었거나 알 수 없습니다 (`%.250s' 패키지의 트리거 관심 파일에서)패키지 이름이 (`%.250s') 잘못되었습니다 (`%.250s' 트리거 전환 파일에서)잘못된 상태트리거 이름이 ('%.250s') 잘못되었습니다: %.250s%s 파일을 읽는 중 줄이 끝났습니다%s 파일을 읽는 중 줄이 너무 길거나 줄이 끝나지 않았습니다%s 링크는 프라이머리와 슬레이브 둘 다입니다다음에서 로컬 전환: %s
+%s의 로컬 전환%s의 %s(으)로 로컬 전환다음으로 로컬 전환: %s
+로컬에서 전환: %s
+긴 파일 이름관리자 스크립트 `%.50s'의 권한이 잘못되었습니다 : %03lo (>=0555 및 <=0775이어야 합니다)관리자 스크립트 `%.50s'은(는) 일반 파일이 아니거나 심볼릭 링크입니다관리자 스크립트 `%.50s'의 정보를 읽을 수 없습니다수동 모드마스터 파일마스터 링크비어있는 문자열이 아닌 것 같습니다<전환할파일>에 문제 발생
+  '%s' 지우던 도중
+  '%s' 발견<패키지>에 문제 발생
+  '%s' 지우는 중
+  '%s' 발견여러 충돌 및 대체'%.250s' 파일에 대한 statoverrides 파일이 여러 개 있습니다%s 이름은 프라이머리와 슬레이브 둘 다입니다명령 옵션이 필요합니다필드 이름 `%.*s'에 줄바꿈 문자가 있습니다update-alternatives 파일(%s)에는 줄바꿈이 금지되어 있습니다.`%.255s'에 패키지 정보가 없습니다`%s'(이)라는 이름의 패키지는 설치되어 있지 않습니다. 설정할 수 없습니다.설치하지 않았습니다설치하지 않았지만 설정 파일이 남아 있습니다버전 번호에서 콜론 뒤에 아무 것도 없습니다오래된 설정 파일 '%.250s'은(는) 빈 디렉터리였으며 이제 지워졌습니다오래된 파일 `%.250s'은(는) 새로운 파일과 같습니다! (%.250s와 %.250s 모두)패키지의 과거 버전에 들어 있는 정보 파일의 이름이 (`%.250s'(으)로 시작) 너무 깁니다.`%.255s' 컴포넌트를 (%.255s 안에) 여는데 예상치 못한 방법으로 실패했습니다새 클린업 엔트리에 필요한 메모리가 부족합니다인수가 많은 새 클린업 엔트리에 필요한 메모리가 부족합니다--force 옵션이 켜져 있으므로 문제를 무시합니다:%.250s 패키지는 이미 설치되어 설정되어 있습니다%.250s 패키지는 설정 준비가 되어 있지 않습니다
+ 설정할 수 없습니다. (현재 상태 : `%.250s')%.250s 패키지는 트리거 처리 준비가 되어 있지 않습니다.
+ (현재 상태: `%.250s', 밀린 트리거 없음)%s 패키지는 정보 파일로 목록이 들어 있습니다패키지의 아키텍처(%s)는 시스템(%s)과 맞지 않습니다.패키지에 들어 있는 정보 파일의 이름이 (`%.250s'(으)로 시작) 너무 깁니다.패키지 컨트롤 정보에 `%.250s' 디렉터리가 들어 있습니다패키지 컨트롤 정보 `%.250s'의 rmdir에서 디렉터리가 아니라는 결과가 나오지 않았습니다이 패키지가 다른 패키지를 전환: %s
+패키지 파일 MD5 체크섬패키지의 상태가 %s이지만 트리거가 대기하고 있습니다패키지의 상태가 %s이지만 트리거가 밀려 있습니다패키지에 줄바꿈이 있으면 안 됩니다패키지 이름패키지 이름에 영문 소문자나 숫자나 `-+.'이 아닌 문자가 들어 있습니다패키지 버전 번호구성 요소 %d번이 없습니다`%.250s' 구성 파일이 일반 파일이 아닙니다구성 요소의 크기가 너무 크거나 0보다 큰 수가 아닙니다구성 요소의 크기는 최소한 %dKiB는 되어야 합니다 (헤더가 들어 있기 때문에)통과
+붙여넣기미리 의존 문제 - %.250s 패키지를 설치할 수 없습니다우선순위priority는 정수여야 합니다%s의 우선순위: %s%.250s에서 읽기 오류가 발생했습니다`%.250s'에서 읽기 오류가 발생했습니다설정 파일 `%.255s'에서 읽기 오류가 발생했습니다표준 입력을 읽는데 오류가 발생했습니다설정 파일 프롬프트에서 표준입력에 읽기 오류가 발생했습니다다시 합친 패키지 파일%.250s 삭제수동으로 선택한 대체 항목을 지우는 중 - %s을(를) 자동 모드로 변경합니다rename은 '%s'을(를) 다른 파일 '%s'(으)로 
+  덮어씌우는 작업이므로 허용하지 않습니다rename: 중복된 예전 링크 '%s' 지웁니다요청한 작업을 하려면 수퍼유저 권한이 필요합니다패키지를 찾을 수 없습니다 (*.deb과 일치하는 파일들)패키지 정보 엔트리를 여러 개 발견했습니다. 하나만 쓸 수 있습니다슬레이브 파일슬레이브 링크슬레이브 링크가 %s 메인 링크와 같습니다슬레이브 이름`%.250s' 소스 파일이 일반 파일이 아닙니다statoverride 파일에 빈 줄이 들어 있습니다statoverride 파일에 마지막 줄바꿈이 빠졌습니다상태맨 끝에 있는 /를 지웁니다%s 하위 프로세스가 오류 %d번을 리턴했습니다새 파일 트리거 파일에 (`%.250s') 문법 오류가 있습니다statoverride 파일에 문법 오류가 있습니다한 개의 인자를 받습니다 (트리거 이름)대상이 디렉터리입니다 - 컨트롤 파일 검사를 건너 뛸 수 없습니다구성 요소 %d번에 여러 버전이 있습니다 - 최소 `%.250s' 및 `%.250s'패키지 새 버전에 스크립트가 없습니다 - 포기합니다`%.250s'에서 줄이 너무 길거나 줄바꿈이 빠졌습니다트리거 관심 파일에 (`%.250s') 문법 오류가 있습니다. 잘못된 패키지 이름 (`%.250s'): %.250s트리거 이름에 쓸 수 없는 문자가 들어 있습니다트리거트리거 ci 파일에 (`%.250s') 트리거 문법이 잘못되었습니다 (트리거 이름 `%.250s'): %.250s트리거 ci 파일에 알 수 없는 지시어가 (`%.250s') 들어 있습니다트리거 ci 파일에 알 수 없는 지시어 문법이 들어 있습니다트리거가 반복하고 있으므로 지웁니다'%.250s'의 덮어쓰기를 시도합니다. 이 파일은 %.250s %.250s 패키지에도 들어있습니다`%.250s' 덮어쓰기를 시도합니다. 이 버전은 `%.250s'의 전환된 버전입니다`%.250s' 덮어쓰기를 시도합니다. 이 버전은 `%.250s'의 전환된 버전입니다(해당 패키지: %.100s)디렉터리가 없는 %2$.250s %3$s.250s 패키지의 '%1$.250s' 디렉터리 덮어쓰기를 시도합니다두 가지 명령이 지정되었습니다: --%s 및 --%s`%.250s' 입력 구성 파일을 (다시) 열 수 없습니다대상 파일 '%.250s'의 소유를 바꿀 수 없습니다`%.250s' 파일이 있는 지 여부를 검사할 수 없습니다'%s' 파일의 잠금 상태를 검사할 수 없습니다`%.250s' 아카이브가 있는 지 여부를 검사할 수 없습니다`%.255s'의 백업 심볼릭 링크의 소유자를 바꿀 수 없습니다다른 버전을 설치하기에 앞서 `%.255s' 관련 필요없는 파일들을 지울 수 없습니다'%s' 파일을 닫을 수 없습니다새로 트리거 전환한 파일을 (`%.250s') 닫을 수 없습니다`%.250s'의 업데이트 상태를 닫을 수 없습니다`%.255s'을(를) 만들 수 없습니다`%.255s' 파일을 만들 수 없습니다 (`%.255s' 처리 중)임시 디렉터리를 만들 수 없습니다트리거 상태 디렉터리를 (`%.250s') 만들 수 없습니다컨트롤 정보 파일 `%.250s' 파일을 지울 수 없습니다오래된 디렉터리 '%.250s'을(를) 지울 수 없습니다: %s다 사용한 저장 파일 `%.250s'을(를) 지울 수 없습니다`%.250s' 파일을 지울 수 없습니다%s 프로그램을 실행할 수 없습니다 (%s)채움 문자로 %.250s 파일을 채울 수 없습니다채운 뒤에 %.250s 파일을 플러시할 수 없습니다'%s' 파일을 플러시할 수 없습니다`%.250s'의 업데이트 상태를 플러시할 수 없습니다소스 파일의 정보를 열 수 없습니다`%.250s'의 업데이트 상태를 동기화할 수 없습니다%.250s을(를) 실행하기 전 %s 시그널을 무시할 수 없습니다`%.250s' 파일을 `%.250s' 파일로 설치할 수 없습니다새 (예상) 정보 파일 `%.250s' 파일을 설치할 수 없습니다새 정보 파일 `%.250s'을(를) `%.250s'(으)로 설치할 수 없습니다새로 트리거 전환한 파일을 (`%.250s') 설치할 수 없습니다`%.255s'의 새 버전을 설치할 수 없습니다`%.250s'의 업데이트 상태를 설치할 수 없습니다새 버전을 설치하기 전 `%.255s'의 백업 링크를 만들 수 없습니다`%.255s'에 대한 백업 심볼릭 링크를 만들 수 없습니다새 버전을 설치할 때 `%.255s'을(를) 옮겨 놓을 수 없습니다'%.255s' 파일을 열 수 없습니다'%s' 파일을 열 수 없습니다새 저장 파일 `%.250s'을(를) 열 수 없습니다`%.250s' 출력 파일을 열 수 없습니다`%.250s' 소스 파일을 열 수 없습니다임시 컨트롤 디렉터리를 열 수 없습니다트리거 ci 파일을 (`%.250s') 열 수 없습니다트리거가 전환한 파일을 (`%.250s') 열 수 없습니다새로 트리거 전환한 파일을 (`%.250s') 열거나 만들 수 없습니다저장 디렉터리 `%.250s'을(를) 읽을 수 없습니다새 파일 트리거 파일을 (`%.250s') 읽을 수 없습니다`%.250s 파일의 파일디스크립터 플래그 값을 읽을 수 없습니다`%.255s' 링크를 읽을 수 없습니다구성 요소 파일 `%.250s'을(를) 읽을 수 없습니다'%.250s'의 백업 복사본을 제거할 수 없습니다`%.250s'의 새로 푼 버전을 지울 수 없습니다`%.250s'의 새로 푼 버전을 지울 수 없습니다백업 복사본을 다시 설치하기 위해 `%.250s'의 새로 설치된 버전을 지울 수 없습니다.과거 정보 파일 `%.250s' 파일을 지울 수 없습니다새 저장 파일 `%.250s'의 이름을 `%.250s'(으)로 바꿀 수 없습니다구성 요소 파일 `%.250s'을(를) 다시 열 수 없습니다`%.250s'의 백업 버전을 복구할 수 없습니다'%.255s'을(를) 안전하게 지울 수 없습니다'%.255s'을(를) 안전하게 제거할 수 없습니다오래된 '%.250s' 파일을 안전하게 지울 수 없습니다: %s채운 뒤에 %.250s 파일의 시작으로 이동할 수 없습니다%s 데이터베이스 파일에 버퍼링을 설정할 수 없습니다%.250s 파일의 "실행할 때 닫기" 플래그를 설정할 수 없습니다`%.250s'에 실행 권한을 설정할 수 없습니다대상 파일 '%.250s'의 모드를 설정할 수 없습니다메인테이너 스크립트에서 환경 변수를 설정할 수 없습니다%s `%.250s'의 정보를 읽을 수 없습니다%s '%.250s'의 정보를 읽을 수 없습니다: %s`%.250s'의 정보를 읽을 수 없습니다컨트롤 디렉터리의 정보를 읽을 수 없습니다현재 설치된 설정 파일, `%.250s' 파일의 정보를 읽을 수 없습니다새로운 배포 설정 파일, `%.250s' 파일의 정보를 읽을 수 없습니다새로운 파일 `%.250s'의 정보를 읽을 수 없습니다다른 버전을 설치하기에 앞서 복구한 `%.255s' 파일 정보를 읽을 수 없습니다'%.250s' 소스 파일을 열 수 없습니다트리거가 전환한 파일의 (`%.250s') 정보를 읽을 수 없습니다'%.255s' 파일을 동기화할 수 없습니다'%s' 파일을 동기화할 수 없습니다`%.250s'의 업데이트 상태를 자를 수 없습니다'%s' 파일에 쓸 수 없습니다새로 트리거 전환한 파일에 (`%.250s') 쓸 수 없습니다상태 파일 디스크립터 %d에 쓸 수 없습니다`%.250s'의 업데이트 상태를 쓸 수 없습니다'%s'에서 따옴표가 맞지 않습니다예상치 못한 bzip2 오류%d번째 줄에 있는 패키지와 선택 후 예상치 못한 데이터가 나왔습니다%2$.255s 안의 %1$s 안에서 예상치 못하게 파일이 끝났습니다%s 파일을 읽는 중 예상치 못하게 파일이 끝났습니다%d번째 줄에 있는 패키지 이름 뒤에 예상치 못하게 줄이 끝났습니다%d번째 줄에 있는 패키지 이름에 예상치 못하게 줄이 끝났습니다statoverride 파일에서 갑작스레 줄이 끝났습니다알 수 없는 인수 '%s'알 수 없는 압축 종류 `%s'!알 수 없는 force/refuse 옵션 `%.*s'알 수 없는 옵션 '%s'알 수 없는 옵션 -%c알 수 없는 옵션 --%s%d번째 줄에 알 수 없는 요청 상태가 나왔습니다: %.250s풀었지만 설정하지 않았습니다업데이트 디렉터리에 들어 있는 `%.250s' 파일의 이름이 너무 깁니다 (길이=%d, 최대값=%d)업데이트 디렉터리의 파일의 이름 길이가 서로 다릅니다 (%d 및 %d)사용자 정의 필드 이름 `%.*s'은(는) 너무 짧습니다버전 문자열 안에 공백이 들어 있습니다버전 문자열이 비어 있습니다%s 하위 프로세스를 wait하는데 실패했습니다경고%s 파일을 읽는 중: %s%.250s 패키지를 지우는 데, '%.250s' 디렉터리를 지울 수 없습니다: %s - 디렉터리가 마운트 포인트입니까?패키지를 패키지 이름으로 지정해야 합니다. 패키지 파일 이름이 아닙니다
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/ku.gmo dpkg-1.20.7.1/po/ku.gmo
--- dpkg-1.20.7.1-orig/po/ku.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/ku.gmo	2021-06-09 18:25:15.176503767 -0500
@@ -0,0 +1,70 @@
+��3�GLh=i.�4�5'-].�$���61V!��)�9�.'I&q3�5�,GSjw-������	
		5	*L	"w	�	�	�		�	
�	�	&�	"
+>
+�F
+I�.(6W�8�3�4
&L
s
�
5�
0�
$=7L5�:�8�..0]2�����
+@9E� ������7*)b������(�	;.	2$1,3&
++(*#0 !
/-"%)'     Version in package is the same as at last installation.
+  %.250s is installed, but is version %.250s.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Version of %s on system is %s.
+ %d in %s:  ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on (Reading database ... (no description available); however:
+Debian %s version %s.
+Deleted %s.
+DescriptionInstalling new version of config file %s ...
+NameSetting up %s (%s) ...
+Type 'exit' when you're done.
+Version[default=N][default=Y][no default]cannot read info directorycannot remove '%.250s'dependency problems - leaving unconfigureddependency problems - not removingdone
+error reading %.250sfailed to create directoryinstallednot installedpart %d is missingunable to install '%.250s' as '%.250s'unpacked but not configuredwarningProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:50+0200
+Last-Translator: Erdal Ronahi <erdal.ronahi@gmail.com>
+Language-Team: Kurdish <ku@li.org>
+Language: ku
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+X-Rosetta-Export-Date: 2007-04-07 11:08:10+0000
+     Ferq nav versiyona di pakêtê û versiyona sazkirî ya dawî tune.
+  %.250s sazkirî ye, lê guhartoya %.250s e.
+  sazkirina %.250s pêwist e, lê guhartoya %.250s e.
+  %.250s dê were rakirin.
+  %.250s hatiye derxistin, lê qet nehatiye veavakirin.
+  %.250s hatiye derxistin, lê guhartoya %.250s e.
+  %.250s e. guhartoya dawî ya veavakirî %.250s e.
+  Pakêta %s hê nehatiye veavakirin.
+  Pakêta %s ne sazkirî ye.
+  Pakêta %s dê were rakirin.
+  Pakêta %s ya ku %s tîne hê nehatiye veavakirin.
+  Pakêta %s ya ku %s tîne hê ne sazkirî ye.
+  Guhartoya %s di pergalê de %s e.
+ %d di %s de:  ==> Pelê config ê kevn wekî standard tê parastin.
+ ==> Kesê miqate versiyoneke rojanekirî belav kir.
+ ==> Pelê aniha yê kevn tê bikaranîn wekî tê xwest.
+ ==> Pelê config ê nû wekî standard tê bikaranîn.
+ ==> Pelê nû tê bikaranî wekî tê xwest.
+ Çalakiya standard sazkirina guhartoya nû ye.
+ Çalakiya standard parastina guhartoya aniha ye.
+ û jê giredayî ye(Danegeh tê xwendin ... (rave ne amade ye); lê belê:
+Debian %s guhartoya %s.
+%s hatiye jêbirin.
+Raveversiyona nû ya pelê mîhengan ê %s tê sazkirin ... 
+Nav%s (%s) tê veavakirin ...
+Dema xelas kir `exit' binivîse
+Versiyon[standard=N][standard=Y][standard tune]peldanka agahiyê nayê xwendin`%.250s' nayê rakirinpirsgirêkên girêdanbûnê - bê veavakirinê dimînepirsgirêkên bindestiyê - nayê rakirintemam
+di xwendina %.250s de çewtîafirandina peldankê biserneketsazkirîne sazkirîbeşa %d kêm enikarî `%.250s' wekî `%.250s' saz bikederxistî lê ne veavakirîhişyarî
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/lt.gmo dpkg-1.20.7.1/po/lt.gmo
--- dpkg-1.20.7.1-orig/po/lt.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/lt.gmo	2021-06-09 18:25:15.215503827 -0500
@@ -0,0 +1,201 @@
+��tg�hai=�&	.0_.p� �4�5--c.�1�$�4/L|$���6�101b!�(��)�9.O'~&�3�57=J_t���-�H�Q+A}e�f%7�<�BD[
v ��5�1�#& KJ 5� -� !� !56!l!,�!�!H�!6">Q"�"�"�"�#0�#3$1G$y$�$*�$2�$��$-�&]�&!'G&'8n',�'�':�' .(-O(}(��(�H)�#*��*�+ �+,�+$
+,/,7,C,O,6\,!�,�,�,%�,-4-;K-3�-�-A�-&.EA.,�."�.-�.,/G2/z/*�/"�/�/�/�/-0)K0u0�0)�0�0�0!1!31U1%r1%�1�1!�1 �1#2+:2%f2$�2�2�2:�2373T3$q3�3�3�3�35�3 -4N40n4*�4.�4+�44%5;Z5<�5;�5?6$O6At6<�6�6'�6	'7"17OT78�7*�78 868"S84v8
�8 �8%�8G9#H97l92�9Y�941:Ff:1�:;�:D;`;s;.{;�;)�;�;&<-<0F<6w<4�<+�<4=@D=%�=1�=+�=*	>4>+N>z>"�>$�>*�>*?&3?3Z?4�?)�?,�?D@*_@4�@%�@.�@A41A4fA[�A,�A#$B,HB/uB+�B-�B�BC22C&eCB�C1�C*D6,D4cD1�D"�D�DE(E=ESYEM�E(�E"$FGF`_F��FuvHE�H 2I)SI}I4�I�I�I7�I7J9RJ6�J6�J)�J$$K5IK0K�K#�K�KL1$L(VL.L1�L,�L
M1#M8UM4�M2�M.�M0%N3VN�N�N�N�N�N�N�NO>OFROd�OC�OcBP|�P9#QE]Q=�Q�Q�QR'9R%aR6�RA�R SS!S7uS1�S&�S$T?+T7kT/�T&�TO�TYJUU�U�UVV<W'SW3{W@�W�W
+XX3'X�[X4LZS�Z�ZK�ZQ([*z[�[8�[�[7\J\�i\�]�^��^�_6�_:�_-`A`I```"w`9�`4�`$	a+.a:Za(�a �aO�aN/b)~b>�b;�bE#c/icA�c2�c-dM<d%�d7�d(�dee&3e>ZeF�e$�ef0f!Nf"pf �f*�f(�f+g!4gVg#mg!�g$�g-�g h&'hNhnhL�h!�h�h3
+i)>ihi�i�i�i=�i#j$9j6^j=�j0�j:kH?kE�kH�kFlF^l.�lJ�l@m`m1vm	�m,�m_�mF?nJ�n�n�n'o(0o3Yo�o1�o)�oT�o3JpF~p0�p`�p6WqR�q2�qQrQfr�r�r*�r�r1s(HsKqs�s<�sLtO`t6�tE�t9-u*gu4�uC�u2v>v;Xv�v+�v'�v2w77w(owB�wR�w).x1XxQ�x;�xEy(^y2�y"�y;�y9zuSz=�z4{.<{5k{7�{/�{!	|$+|GP|1�|E�|/}2@}:s}@�}=�}1-~_~y~3�~$�~W�~PE=���J�~�,���O�%��->Z��*d'^N�B��v�?����{��G����l+��2���C�Ic����S0�:�5;�]E3	�@AY��h�p�/�ew����$��b��gV��F���4tK��U`D\	TLj[��R�i���m�(�����kq�.6��|��=�!����s"f�u�}����r�H����� ���a�1M�8��9Q�7J&����xz
+��P���<�X

+W�_��#n������y���)�������o
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s to be configured is %s.
+ %d in %s:  ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+%s conflicts with %s%s depends on %s%s enhances %s%s recommends %s%s suggests %s'%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs a .deb filename argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split takes at most a source filename and destination prefix; however:
+Authenticating %s ...
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Installing new version of config file %s ...
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NamePackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Processing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+Type 'exit' when you're done.
+Type dpkg-split --help for help.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Version[default=N][default=Y][no default]archive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerbroken due to postinst failurecan't remove old postrm scriptcan't stat package info file '%.255s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan updates directory '%.255s'character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconflicting actions -%c (--%s) and -%c (--%s)conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)couldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdone
+duplicate path %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror reading %.250serror reading %s from file %.255serror reading from dpkg-deb pipeerror setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror writing '%s'error writing to stderr, discovered before conffile promptfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to write details of '%.50s' to '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfiles list file for package '%.250s' contains empty filenamefork failedillegal package name at line %d: %.250sinstalledinvalid integer for --%s: '%.250s'maintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemay not be empty stringneed an action optionnewline in field name '%.*s'no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold version of package has overly-long info file name starting '%.250s'out of memory for new cleanup entryout of memory for new cleanup entry with many argumentspackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage name has characters that aren't lowercase alphanums or '-+.'part %d is missingpassed
+pre-dependency problem - not installing %.250sread error in %.250sread error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package filerequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedsubprocess %s returned error exit status %dtarget is directory - cannot skip control file checkthere is no script in the new version of the package - giving upunable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to close updated status of '%.250s'unable to create '%.255s'unable to delete control info file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush updated status of '%.250s'unable to fsync updated status of '%.250s'unable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open temp control directoryunable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to seek to start of %.250s after paddingunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to stat %s '%.250s'unable to stat '%.250s'unable to stat current installed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to truncate for updated status of '%.250s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptyyou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:50+0200
+Last-Translator: Gintautas Miliauskas <gintas@akl.lt>
+Language-Team: Lithuanian <komp_lt@konferencijos.lt>
+Language: lt
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=3; plural=n%10==1 && n%100!=11 ? 0 : n%10>=2 && (n%100<10 || n%100>=20) ? 1 : 2;
+
+Konfigūracijos failas „%s“ sistemoje neegzistuoja.
+Diegiamas nauja konfigūracijos failas, kaip buvo nurodyta.
+     Versija esanti pakete yra tokia pat kaip per praeitą diegimą.
+     ne paprastas %.255s failas
+  %.250s (versija %.250s) bus įdiegtas.
+  %.250s yra %s.
+  %.250s yra įdiegtas, tačiau yra versija %.250s.
+  %.250s yra neįdiegtas.
+  %.250s bus dekonfigūruotas.
+  %.250s prašoma įdiegti, tačiau jo versija %.250s.
+  %.250s bus pašalintas.
+  %.250s yra išpakuotas, tačiau nebuvo konfigūruotas.
+  %.250s yra išpakuotas, tačiau yra versija %.250s.
+  %.250s paskutinė konfigūruota versija yra %.250s.
+  %.250s teikia %.250s ir bus įdiegtas.
+  %.250s teikia %.250s, bet yra %s.
+  %.250s teikia %.250s tačiau bus dekonfigūruotas.
+  %.250s teikia %.250s tačiau bus pašalintas.
+  %s (%s) teikia %s.
+  Paketas %s dar nekonfigūruotas.
+  Paketas %s neįdiegtas.
+  Paketas %s bus pašalintas.
+  Paketas %s teikiantis %s dar nekonfigūruotas.
+  Paketas %s teikiantis %s neįdiegtas.
+  Paketas %s kuris teikia %s bus pašalintas.
+  Sistemoje esantičio %s paketo versija yra %s.
+  Bus konfigūruojama paketo %s versija %s.
+ %d yra (viduje) %s:  ==> Pagal nutylėjimą paliekamas senas failas.
+ ==> Paketų platintojas pateikė atnaujintą versiją.
+ ==> Naudojamas esamas senas failas, kaip nurodyta.
+ ==> Pagal nutylėjimą naudojamas naujas failas.
+ ==> Naudojamas naujas failas, kaip nurodyta.
+ Pagal nutylėjimą bus įdiegta nauja versija.
+ Pagal nutylėjima bus palikta dabartinė versija.
+ ir  priklauso nuo %s (vidinis procesas): %s
+%s konfliktuoja su %s%s priklauso nuo %s%s pagerina %s%s rekomenduoja %s%s siūlo %slaukelyje `%s', nekorektiškas paketo pavadinimas `%.255s': %slaukelyje `%s', trūksta paketo pavadinimo, arba vietoj jo šiukšlėslaukelyje `%s' , saitas į `%.255s':
+ `%c' yra nebenaudojamas, vietoj jo naudokite `%c=' arba `%c%c'laukelyje `%s' , saitas į `%.255s':
+ blogi versijų santykiai %c%claukelyje `%s' , saitas į `%.255s':
+ privalomas tam tikras versijos numeris, patariama naudoti `='laukelyje `%s' , saitas į `%.255s':
+ versijos reikšmė prasideda ne skaičiumi ar raide, patariama pridėti tarpo simbolįlaukelyje`%s', nuorodoje į `%.255s': neužbaigta versijalaukelyje `%s', po nuorodos į paketą `%.255s' yra sintaksės klaida(Pažymėtinas %s dingimas, kuris buvo visiškai pakeistas.)
+(Skaitoma duomenų bazė ... (aprašymas neprieinamas), išvesta derinimo informacija-%c pasirinkimui reikšmė nereikalinga-%c pasirinkimui reikalinga reikšmė--%s --pending nereikia jokių ne parametro reikšmių--%s --recursive pasirinkimui reikia bent vienos kelio reikšmės--%s reikia .deb failo parametro--%s reikia nurodyti įdiegimo aplanką.
+Gal geriau būtų naudoti dpkg --install ?--%s reikia nors vienos paketo archyvo failo reikšmės--%s reikalinga bent viena paketo vardo reikšmėparametrui --%s nereikalinga reikšmėparametrui --%s reikalinga reikšmė--%s priima daugiausiai du parametrus (.deb failą ir aplanką)--%s parametras nereikalauja nurodyti jokių reikšmių--%s priima tik vieną parametrą (.deb failą)blogas sąryšis su --compare-versions--compare-versions reikalingos trys reikšmės: <versija> <santykiai> <versija>--search pasirinkimui reikia nurodyti bent vieną failo pavadinimą, ar failų kriterijų--split daugiausiai reikia nurodyti išeities failo vardą ir vietos talpinimui kelio; tačiau:
+Autentikuojamas %s ...
+Palyginimo operatoriai dėl --compare-versions yra:
+  lt le eq ne ge gt       (tuščią versiją laikyti pačia anksčiausia);
+  lt-nl le-nl ge-nl gt-nl (tuščią versiją laikyti kaip pačia naujausią);
+  < << <= = >= >> >       (tik dėl suderinamumo su valdymo failo sintakse).
+
+Debian %s versija %s.
+Debian `%s' paketo archyvo versija %s.
+Debian `%s' package management program version %s.
+Debian paketų išskaidymo/sujungimo įrankis `%s'; versija %s.
+Ištrintas %s.
+AprašymasApdorojant įvyko klaidų:
+„%.250s“ failas nėra sudalinto archyvo dalis.
+Formato sintaksė:
+  Formatas tai teksto eilutė kuri bus išvedama ties kiekvienu paketu. Eilutėje
+  gali būti standartinės escape sekos \n (nauja eilutė), \r (naujos
+  eilutės simbolis) arba \\ (atvirkštinis pasviręs brukšnys). Paketo informacija gali būti itraukta
+  kintamuosius paketo informacijos eilutėse naudojant ${var[;plotis]}
+  sintaksę. Laukeliai bus lygiuoti į kairę, nebent pločio reikšmė būtų neigiama - tuo atveju
+  bus naudojamas lygiavimas į dešinę pusę.
+Diegiama nauja konfigūracijos failo versija %s ...
+Buvo išpakuota daugiau nei viena paketo %s versija !
+  Konfigūruosiu tik kartą.
+VardasPaketas %s sulaikytas, neliečiu jo.  Naudokite --force-hold kad apdoroti.
+Paketas %s nurodytas daugiau nei vieną kartą, apdorotas bus tik vieną kartą.
+Pakete „%s“ nėra nei vieno failo (!)
+Dar neperrinkti paketai:
+Procesas buvo sustabdytas, dėl didelio klaidų kiekio.
+Įrašas apie %s iš %s.
+Keičiama prieinama paketų informacija, naudojant %s.
+Tvarkomas paketas %s (%s) ...
+Sekantys paketai sukėlė problemų diegimo metu.  Jie turėtu būti pakartotinai įdiegti (taip pat ir paketai
+nuo kurių jie priklauso) jei norite kad jie veiktų:
+Sekantys paketai yra pusiau sukonfigūruoti, kadangi kilo problemų juos diegiant pirmą kartą.
+Turėtų būti daromas pakartotinas konfigūravimas naudojant dpkg --configure <paketas> arba
+konfigūravimo meniu pasirinkime dselect programoje:
+Sekantys paketai yra pusiau įdiegti, kadangi kilo diegimo problemų.
+Galimas pakartotinis diegimas; paketus galima pašalinti naudojant dselect,
+arba dpkg --remove:
+Sekantys paketai buvo išpakuoti tačiau dar nebuvo konfigūruoti.
+Jie turi būti sukonfigūruoti naudojant dpkg·--configure arba konfigūruoti
+meniu pasirinkime dselect programoje, jei norite, kad jie veiktų:
+Įveskite `exit' kai baigsite.
+Norėdami gauti pagalbą įvykdykite dpkg-split --helpAtnaujinama prieinamų paketų informacija, naudojant %s.
+Naudojimas: %s [<parametras> ...] <komanda>
+
+Versija[pagal nutylėjimą=N][pagal nutylėjimą=Y][nėra veiksmo pagal nutylėjimą]archyve esantis `%.255s' objektas yra nežinomo 0x%x tipoarchyvo antraštėje nėra naujos eilutės simboliųsugadintas dėl klaidos po įdiegimonepavyko pašalinti seno postrm scenarijausnepavyko patikrinti paketo informacijos failo „%.255s“negaliu perskaityti informacijos aplankonepavyko pašalinti „%.250s“nepavyko pašalinti senų konfigūracijos failų kopijų`%.250s' (iš `%.250s')nepavyksta pašalinti seno konfigūracijos failo „%.250s“ (= „%.250s“)nepavyko pašalinti senų failų sąrašonegaliu patenkinti priklausomybių %.250s (norima dėl %.250s)nepavyksta patikrinti atnaujinimų aplanko `%.255s' turiniosimbolis `%c' neleistinas (tik raidės, skaičiai bei simboliai `%s')konfigūracijos failo „%.250s“ nėra paketekonfigūracijos failo „%.250s“ būsena negali būti nustatytakonfliktuojantys veiksmai -%c (--%s) ir -%c (--%s)konfliktuojantys paketai - neįdiegsiu %.250svaldymo aplankas yra negeromis %03lo teisėmis (turį būti >=0755 ir <=0775)nepavyko atverti `%i' srautui sukurtipriklausomybių problemos - paliekamas nekonfigūruotaspriklausomybių problemos - nešalinamasbaigta
+pasikartojantis kelias %spasikartojanti `%s' laukelio reikšmėpasikartojanti reikšmė vartotojo nurodytame `%.*s' laukelyjegauta tuščia eilutė iš „fgets“ skaitant konfigūracijos failuslaikmetis versijoje yra ne skaičiusklaida uždarant %.250sklaida uždarant `%.255s' konfigūracijos failąklaida uždarant/rašant `%.255s'klaida kuriant įrenginį `%.255s'klaida kuriant aplanką `%.255s'klaida kuriant tvirtają nuorodą `%.255s'klaida kuriant duomenų srautą `%.255s'klaida kuriant simbolinę nuorodą `%.255s'klaida mano `%.250s' neegzistuojaklaida skaitant %.250sklaida skaitant %s iš failo %.255sklaida skaitant iš dpkg-deb pipeklaida nustatant savininką `%.255s'klaida nustatant nuorodos savininką `%.255s'klaida nustatant teises `%.255s'klaida nustatant laiko žymę `%.255s'klaida bandant atidaryti %.250sklaida `%s' rašymeklaida rašant į išvestį, atrasta prieš konfigūracinio failo užklausąnepavyko atverti aplanko `%.255s'nepavyko atverti aplankonepavyko pakeisti šakninio aplanko į „%.250s“po nuskaitymo nepavyko uždaryti `%.255s'nepavyko sukurti aplankonepavyko sukurti srautonepavyko ivykdyti dup su fd %dnepavyko ivykdyti dup su std%snepavyko atverti skaitymui paketo informacijos failo `%.255s'nepavyko atverti statoverride failonepavyko nuskaityti archyvo `%.255s'nepavyko pašalinti prijungto atnaujinimo failo %.255sįvyko klaida šalinant mano paties atnaujinimo failą %.255snepavyko įrašyti `%.50s' aprašymo į `%.250s'po laukelio pavadinimo `%.*s' būtinai turi būti kablelisfailas „%.250s“ sugadintas - bloga MD5 kontrolinė suma „%.250s“failas „%.250s“ sugadintas - klaidinga pirmos antraštės pabaigafailas „%.250s“ sugadintas - klaidinga antrosios antraštės pabaigafailas „%.250s“ sugadintas – antrasis narys nėra duomenų narysfailas „%.250s“ sugadintas - negeras nurodyto dydžio dalies dydisfailas „%.250s“ sugadintas – per trumpasfailas „%.250s“ sugadintas - negeras nurodyto dydžio dalių skaičiuspaketo `%.250s' failų sąrašo faile yra tuščias failo vardasnepavyko suskirstymasnekorektiškas paketo vardas eilutėje %d: %.250sįdiegtasreikalingas sveikas skaičius --%s: `%.250s'prižiūrėtojo scenarijus `%.50s' yra negeromis %03lo teisėmis (turį būti >=0555 ir <=0775)prižiūrėtojo scenarijus `%.50s', nėra paprastas failas arba saitasprižiūrėtojo scenarijui `%.50s' negali būti nustatyta/parodyta būsenanegali būti tuščia eilutėreikia veiksmo parametronaujos eilutės žymė laukelyje `%.*s'`%.255s' nėra informacijos apie paketąnėra paketo pavadinimu `%s', negaliu konfigūruotineįdiegtasneįdiegtas, tačiau likę konfigūracijos failaiversijos numeryje po kablelio nieko nėrasena paketo versija turi per daug didelę informacijos failą pradedant „%.250s“pritrūko atminties vykdant valymą naujam įrašuipritrūko atminties vykdant valymą naujam įrašui su daug parametrųpaketas %.250s jau įdiegtas ir sukonfigūruotaspaketas %.250s neparuoštas konfigūravimui
+ negaliu konfigūruoti (dabartinė būsena `%.250s')paketo architektūra (%s) netinka jūsų sistemai (%s)pakete yra informacijos valdymo failas per ilgu pavadinimu (pradedant „%.50s“)paketo valdymo informacijoje yra aplankas `%.250s'paketo valdymo informacijoje nebuvo parašyta, kad rmdir `%.250s' yra ne aplankaspaketo pavadinime yra simbolių kurie nėra mažosios raidės, skaičiai ar `-+.'trūksta %d daliespraėjo
+priklausomybių problema - nediegiu %.250sskaitymo klaida %.250snuskaitymo klaida konfigūracijos faile  `%.255s'skaitymo klaida standartinėje įvestyjeklaida nuskaitant įvestį, atrasta prieš konfigūracinio failo užklausąperrinktas paketo failasprašomas veiksmas reikalauja administratoriaus privilegijųieškojau, tačiau neradau nei vieno paketo atitinkančio (*.deb) kriterijųrasta keletas informacijos apie paketa įrašų, tačiau leidžiamas tik vienasvidinis procesas %s nutrūko gražindamas reikšmę %dtikslas yra aplankas - neįmanoma praleisti valdymo failo patikrinimonaujo paketo versijoje nėra scenarijaus - paliekama taipnepavyko patikrinti ar egzistuoja `%.250s'neįmanoma patikrinti `%.250s' archyvo buvimo vietosnegaliu pakeisti atsarginės nuorodos kopijos į `%.255s' savininkoneįmanoma uždaryti atnaujintos `%.250s' būsenosnepavyko sukurti `%.255s'nepavyko pašalinti valdymo informacijos failo „%.250s“nepavyksta atmesti `%.250s'nepavyko tarpo simboliais užpildyti %.250spo užpildymo nepavyko išvalyti %.250sneįmanoma išvalyti atnaujintos `%.250s' būsenosnepavyko įvykdyti fsync su atnaujinta `%.250s' būsenanepavyko įdiegti `%.250s' kaip `%.250s'nepavyko įdiegti informacijos failo „%.250s“ (nors reikėtų)nepavyko įdiegti naujo informacijos failo „%.250s“ su pavadinimu „%.250s“negaliu įdiegti naujos `%.255s' versijosneįmanoma įdiegti atnaujintos `%.250s' būsenosneįmanoma sukurti nuorodos į `%.255s' kopijos prieš įdiegiant naują versijąneįmanoma sukurti atsarginės nuorodos į `%.255s' kopijosnepavyksta perkelti atidėto `%.255s' norint įdiegti naują versijąnepavyko atverti laikino valdymo aplankonepavyko nuskaityti %.250s failo aprašymo žymėsneįmanoma rasti nuorodos `%.255s'nepavyksta pašalinti ką tik išpakuotos `%.250s' versijosnepavyksta pašalinti ką tik įdiegtos `%.250s' versijosnepavyko pašalinti naujai įdiegtos `%.250s' versijos, norint sukurti sąlygas atsarginės kopijos naujam įdiegimuinepavyko pašalinti pasenusio „%.250s“ informacijos failonepavyko pakartotinai atverti `%.250s' dalinio failonepavyko atkurti atsarginės `%.250s' versijospo užpildymo nepavyko sugrįžti į %.250s pradžiąnepavyko %.250s nustatyti uždaryti-įvykdžius žymėsnepavyko nustatyti vykdymo teisių „%.250s“nepavyksta patikrinti %s `%.250s'nepavyko nustatyti `%.250s' būsenosnepavyko patikrinti naujai įdiegtos konfigūracijos failo „%.250s“nepavyko patikrinti kito naujo failo „%.250s“prieš diegiant kitą versiją nepavyko patikrinti atstatyto `%.255s'nepavyko nukirpti `%.250s' atnaujintos būsenosneįmanoma įrašyti atnaujintos `%.250s' būsenosnetikėti duomenys po paketo ir pažymėjimo, %d eilutėjenetikėta eilutės pabaigos žymė po paketo vardo, %d eilutėjenetikėta eilutės pabaigos žymė paketo varde, %d eilutėjenežinomas priversti/atsisakyti parametras `%.*s'nežinomas parametras -%cnežinomas --%s parametraseilutėje %d nežinoma pageidautina būsena: %.250sišpakuotas tačiau nekonfigūruotasatnaujinimų aplanke yra failas `%.250s' per ilgu pavadinimu (ilgis=%d, maksimaliai=%d)atnaujinimų aplanke yra failai su skirtingų ilgių pavadinimais (abu %d ir %d)vartotojo nurodytas laukelio pavadinimas `%.*s' - per trumpasversijos eilutėje yra tarpųtuščia versijos eilutėturite nurodyti paketus jų vardais, o ne vardais failų, kuriuose jie yra
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/Makefile dpkg-1.20.7.1/po/Makefile
--- dpkg-1.20.7.1-orig/po/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/Makefile	2021-06-09 18:24:52.114468564 -0500
@@ -0,0 +1,762 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 2000-2019 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# Origin: gettext-0.20
+GETTEXT_MACRO_VERSION = 0.20
+
+PACKAGE = dpkg
+VERSION = 1.20.7.1
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+
+SED = /bin/sed
+SHELL = /bin/sh
+
+
+srcdir = .
+top_srcdir = ..
+
+
+prefix = /usr
+exec_prefix = ${prefix}
+datarootdir = ${prefix}/share
+datadir = ${datarootdir}
+localedir = ${datarootdir}/locale
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh does not start with $(SHELL), so we add it.
+# In automake >= 1.10, $(MKDIR_P) is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh -d
+install_sh = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+MKDIR_P = /bin/mkdir -p
+mkdir_p = $(MKDIR_P)
+
+# When building gettext-tools, we prefer to use the built programs
+# rather than installed programs.  However, we can't do that when we
+# are cross compiling.
+CROSS_COMPILING = @CROSS_COMPILING@
+
+GMSGFMT_ = /usr/bin/msgfmt
+GMSGFMT_no = /usr/bin/msgfmt
+GMSGFMT_yes = /usr/bin/msgfmt
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = /usr/bin/xgettext
+XGETTEXT_no = /usr/bin/xgettext
+XGETTEXT_yes = /usr/bin/xgettext
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_UPDATE = /usr/bin/msgmerge --update
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES =  ast.po bs.po ca.po cs.po da.po de.po dz.po el.po eo.po es.po et.po eu.po fr.po gl.po hu.po id.po it.po ja.po km.po ko.po ku.po lt.po mr.po nb.po ne.po nl.po nn.po pa.po pl.po pt.po pt_BR.po ro.po ru.po sk.po sv.po th.po tl.po tr.po vi.po zh_CN.po zh_TW.po
+GMOFILES =  ast.gmo bs.gmo ca.gmo cs.gmo da.gmo de.gmo dz.gmo el.gmo eo.gmo es.gmo et.gmo eu.gmo fr.gmo gl.gmo hu.gmo id.gmo it.gmo ja.gmo km.gmo ko.gmo ku.gmo lt.gmo mr.gmo nb.gmo ne.gmo nl.gmo nn.gmo pa.gmo pl.gmo pt.gmo pt_BR.gmo ro.gmo ru.gmo sk.gmo sv.gmo th.gmo tl.gmo tr.gmo vi.gmo zh_CN.gmo zh_TW.gmo
+UPDATEPOFILES =  ast.po-update bs.po-update ca.po-update cs.po-update da.po-update de.po-update dz.po-update el.po-update eo.po-update es.po-update et.po-update eu.po-update fr.po-update gl.po-update hu.po-update id.po-update it.po-update ja.po-update km.po-update ko.po-update ku.po-update lt.po-update mr.po-update nb.po-update ne.po-update nl.po-update nn.po-update pa.po-update pl.po-update pt.po-update pt_BR.po-update ro.po-update ru.po-update sk.po-update sv.po-update th.po-update tl.po-update tr.po-update vi.po-update zh_CN.po-update zh_TW.po-update
+DUMMYPOFILES =  ast.nop bs.nop ca.nop cs.nop da.nop de.nop dz.nop el.nop eo.nop es.nop et.nop eu.nop fr.nop gl.nop hu.nop id.nop it.nop ja.nop km.nop ko.nop ku.nop lt.nop mr.nop nb.nop ne.nop nl.nop nn.nop pa.nop pl.nop pt.nop pt_BR.nop ro.nop ru.nop sk.nop sv.nop th.nop tl.nop tr.nop vi.nop zh_CN.nop zh_TW.nop
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+     ../lib/dpkg/ar.c \
+     ../lib/dpkg/arch.c \
+     ../lib/dpkg/atomic-file.c \
+     ../lib/dpkg/buffer.c \
+     ../lib/dpkg/c-ctype.c \
+     ../lib/dpkg/cleanup.c \
+     ../lib/dpkg/color.c \
+     ../lib/dpkg/command.c \
+     ../lib/dpkg/compress.c \
+     ../lib/dpkg/dbdir.c \
+     ../lib/dpkg/dbmodify.c \
+     ../lib/dpkg/db-ctrl-access.c \
+     ../lib/dpkg/db-ctrl-format.c \
+     ../lib/dpkg/db-ctrl-upgrade.c \
+     ../lib/dpkg/db-fsys-digest.c \
+     ../lib/dpkg/db-fsys-divert.c \
+     ../lib/dpkg/db-fsys-files.c \
+     ../lib/dpkg/db-fsys-override.c \
+     ../lib/dpkg/deb-version.c \
+     ../lib/dpkg/debug.c \
+     ../lib/dpkg/depcon.c \
+     ../lib/dpkg/dir.c \
+     ../lib/dpkg/dump.c \
+     ../lib/dpkg/ehandle.c \
+     ../lib/dpkg/error.c \
+     ../lib/dpkg/fdio.c \
+     ../lib/dpkg/fields.c \
+     ../lib/dpkg/file.c \
+     ../lib/dpkg/fsys-dir.c \
+     ../lib/dpkg/fsys-iter.c \
+     ../lib/dpkg/fsys-hash.c \
+     ../lib/dpkg/glob.c \
+     ../lib/dpkg/i18n.c \
+     ../lib/dpkg/log.c \
+     ../lib/dpkg/mlib.c \
+     ../lib/dpkg/namevalue.c \
+     ../lib/dpkg/nfmalloc.c \
+     ../lib/dpkg/options-parsers.c \
+     ../lib/dpkg/options.c \
+     ../lib/dpkg/pager.c \
+     ../lib/dpkg/parse.c \
+     ../lib/dpkg/parsehelp.c \
+     ../lib/dpkg/path-remove.c \
+     ../lib/dpkg/path.c \
+     ../lib/dpkg/pkg-array.c \
+     ../lib/dpkg/pkg-files.c \
+     ../lib/dpkg/pkg-format.c \
+     ../lib/dpkg/pkg-hash.c \
+     ../lib/dpkg/pkg-list.c \
+     ../lib/dpkg/pkg-namevalue.c \
+     ../lib/dpkg/pkg-queue.c \
+     ../lib/dpkg/pkg-show.c \
+     ../lib/dpkg/pkg-spec.c \
+     ../lib/dpkg/pkg.c \
+     ../lib/dpkg/progname.c \
+     ../lib/dpkg/program.c \
+     ../lib/dpkg/progress.c \
+     ../lib/dpkg/report.c \
+     ../lib/dpkg/strhash.c \
+     ../lib/dpkg/string.c \
+     ../lib/dpkg/strwide.c \
+     ../lib/dpkg/subproc.c \
+     ../lib/dpkg/tarfn.c \
+     ../lib/dpkg/treewalk.c \
+     ../lib/dpkg/trigdeferred.c \
+     ../lib/dpkg/triglib.c \
+     ../lib/dpkg/trigname.c \
+     ../lib/dpkg/trignote.c \
+     ../lib/dpkg/utils.c \
+     ../lib/dpkg/varbuf.c \
+     ../lib/dpkg/version.c \
+     ../src/archives.c \
+     ../src/cleanup.c \
+     ../src/configure.c \
+     ../src/depcon.c \
+     ../src/divertcmd.c \
+     ../src/enquiry.c \
+     ../src/errors.c \
+     ../src/file-match.c \
+     ../src/filters.c \
+     ../src/force.c \
+     ../src/help.c \
+     ../src/main.c \
+     ../src/packages.c \
+     ../src/perpkgstate.c \
+     ../src/querycmd.c \
+     ../src/remove.c \
+     ../src/script.c \
+     ../src/select.c \
+     ../src/selinux.c \
+     ../src/statcmd.c \
+     ../src/trigcmd.c \
+     ../src/trigproc.c \
+     ../src/unpack.c \
+     ../src/update.c \
+     ../src/verify.c \
+     ../dpkg-deb/build.c \
+     ../dpkg-deb/extract.c \
+     ../dpkg-deb/info.c \
+     ../dpkg-deb/main.c \
+     ../dpkg-split/info.c \
+     ../dpkg-split/join.c \
+     ../dpkg-split/main.c \
+     ../dpkg-split/queue.c \
+     ../dpkg-split/split.c \
+     ../utils/start-stop-daemon.c \
+     ../utils/update-alternatives.c \
+     ../utils/update-alternatives.polkit.in
+
+CATALOGS =  ast.gmo bs.gmo ca.gmo cs.gmo da.gmo de.gmo dz.gmo el.gmo eo.gmo es.gmo et.gmo eu.gmo fr.gmo gl.gmo hu.gmo id.gmo it.gmo ja.gmo km.gmo ko.gmo ku.gmo lt.gmo mr.gmo nb.gmo ne.gmo nl.gmo nn.gmo pa.gmo pl.gmo pt.gmo pt_BR.gmo ro.gmo ru.gmo sk.gmo sv.gmo th.gmo tl.gmo tr.gmo vi.gmo zh_CN.gmo zh_TW.gmo
+
+POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
+POFILESDEPS_yes = $(POFILESDEPS_)
+POFILESDEPS_no =
+POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
+
+DISTFILESDEPS_ = update-po
+DISTFILESDEPS_yes = $(DISTFILESDEPS_)
+DISTFILESDEPS_no =
+DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+# Makevars gets inserted here. (Don't remove this line!)
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# This is needed so that xgettext can find our local ITS and Location files,
+# to know how to handle the PolicyKit XML files. Otherwise we would need to
+# build depend on PolicyKit itself. We cannot pass an explicit --its option
+# because that forces the implementation language for all input files.
+GETTEXTDATADIR = $(top_srcdir)/po
+export GETTEXTDATADIR
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --from-code=UTF-8 --add-location=file \
+                   --keyword --keyword=_ --keyword=N_ \
+                   --keyword=P_:1,2 --keyword=C_:1c,2
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
+# package.  (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.)  Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright.  The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Dpkg Developers
+
+# This tells whether or not to prepend "GNU " prefix to the package
+# name that gets inserted into the header of the $(DOMAIN).pot file.
+# Possible values are "yes", "no", or empty.  If it is empty, try to
+# detect it automatically by scanning the files in $(top_srcdir) for
+# "GNU packagename" string.
+PACKAGE_GNU = no
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+#   in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+#   understood.
+# - Strings which make invalid assumptions about notation of date, time or
+#   money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS = $(PACKAGE_BUGREPORT)
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used.  It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
+
+# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
+# context.  Possible values are "yes" and "no".  Set this to yes if the
+# package uses functions taking also a message context, like pgettext(), or
+# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
+USE_MSGCTXT = yes
+
+# These options get passed to msgmerge.
+# Useful options are in particular:
+#   --previous            to keep previous msgids of translated messages,
+#   --quiet               to reduce the verbosity.
+MSGMERGE_OPTIONS = --previous --add-location=file --quiet
+
+# These options get passed to msginit.
+# If you want to disable line wrapping when writing PO files, add
+# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and
+# MSGINIT_OPTIONS.
+MSGINIT_OPTIONS =
+
+# This tells whether or not to regenerate a PO file when $(DOMAIN).pot
+# has changed.  Possible values are "yes" and "no".  Set this to no if
+# the POT file is checked in the repository and the version control
+# program ignores timestamps.
+PO_DEPENDS_ON_POT = yes
+
+# This tells whether or not to forcibly update $(DOMAIN).pot and
+# regenerate PO files on "make dist".  Possible values are "yes" and
+# "no".  Set this to no if the POT file and PO files are maintained
+# externally.
+DIST_DEPENDS_ON_UPDATE_PO = yes
+
+DISTFILES.extra1 = ChangeLog.old
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update
+
+# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
+# The GNU Coding Standards say in
+# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
+#   "GNU distributions usually contain some files which are not source files
+#    ... . Since these files normally appear in the source directory, they
+#    should always appear in the source directory, not in the build directory.
+#    So Makefile rules to update them should put the updated files in the
+#    source directory."
+# Therefore we put these files in the source directory, not the build directory.
+
+# During .po -> .gmo conversion, take into account the most recent changes to
+# the .pot file. This eliminates the need to update the .po files when the
+# .pot file has changed, which would be troublesome if the .po files are put
+# under version control.
+.po.gmo: $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
+	cd $(srcdir) && \
+	rm -f $${lang}.gmo && \
+	$(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
+	$(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
+	mv t-$${lang}.gmo $${lang}.gmo && \
+	rm -f $${lang}.1po
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: all-yes
+
+all-yes: $(srcdir)/stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+	test "$(GETTEXT_MACRO_VERSION)" = "0.20" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.20" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).
+
+# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
+# have been loosely updated. Its purpose is that when a developer or translator
+# checks out the package from a version control system, and the $(DOMAIN).pot
+# file is not under version control, "make" will update the $(DOMAIN).pot and
+# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
+# timestamp would not be necessary if updating the $(CATALOGS) would always
+# touch them; however, the rule for $(POFILES) has been designed to not touch
+# files that don't need to be changed.
+$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
+	@$(CHECK_MACRO_VERSION)
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch $(srcdir)/stamp-po" && \
+	  echo timestamp > $(srcdir)/stamp-poT && \
+	  mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
+	}
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	package_gnu="$(PACKAGE_GNU)"; \
+	test -n "$$package_gnu" || { \
+	  if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+	         LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU dpkg' /dev/null '{}' ';' 2>/dev/null; \
+	       else \
+	         LC_ALL=C grep -i 'GNU dpkg' $(top_srcdir)/* 2>/dev/null; \
+	       fi; \
+	     } | grep -v 'libtool:' >/dev/null; then \
+	     package_gnu=yes; \
+	   else \
+	     package_gnu=no; \
+	   fi; \
+	}; \
+	if test "$$package_gnu" = "yes"; then \
+	  package_prefix='GNU '; \
+	else \
+	  package_prefix=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_prefix}dpkg" \
+	      --package-version='1.20.7.1' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	esac
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot-header; then \
+	    sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
+	    cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
+	    rm -f $(DOMAIN).1po \
+	    || exit 1; \
+	  fi; \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(POFILESDEPS)
+	@test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           0.1[6-7] | 0.1[6-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+install-dvi install-ps install-pdf install-html:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f $(srcdir)/stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(srcdir)/stamp-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir) || exit 1; \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       0.1[6-7] | 0.1[6-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use /bin/sh, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status POTFILES.in LINGUAS
+	cd $(top_builddir) \
+	  && /bin/sh ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+# Special Makefile rules for English message catalogs with quotation marks.
+#
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+# This file, Rules-quot, and its auxiliary files (listed under
+# DISTFILES.common.extra1) are free software; the Free Software Foundation
+# gives unlimited permission to use, copy, distribute, and modify them.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+	$(MAKE) en@quot.po-update
+en@boldquot.po-create:
+	$(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	ll=`echo $$lang | sed -e 's/@.*//'`; \
+	LC_ALL=C; export LC_ALL; \
+	cd $(srcdir); \
+	if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \
+	   | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \
+	   { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	     '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \
+	       $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \
+	       ;; \
+	     *) \
+	       $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \
+	       ;; \
+	     esac } 2>/dev/null > $$tmpdir/$$lang.new.po \
+	     ; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "creation of $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+en@quot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+	rm -f *.insert-header
diff -Naurp dpkg-1.20.7.1-orig/po/Makefile.in dpkg-1.20.7.1/po/Makefile.in
--- dpkg-1.20.7.1-orig/po/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/Makefile.in	2021-06-09 18:24:51.955468322 -0500
@@ -0,0 +1,503 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 2000-2019 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# Origin: gettext-0.20
+GETTEXT_MACRO_VERSION = 0.20
+
+PACKAGE = dpkg
+VERSION = 1.20.7.1
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+
+SED = /bin/sed
+SHELL = /bin/sh
+
+
+srcdir = .
+top_srcdir = ..
+
+
+prefix = /usr
+exec_prefix = ${prefix}
+datarootdir = ${prefix}/share
+datadir = ${datarootdir}
+localedir = ${datarootdir}/locale
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh does not start with $(SHELL), so we add it.
+# In automake >= 1.10, $(MKDIR_P) is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh -d
+install_sh = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+MKDIR_P = /bin/mkdir -p
+mkdir_p = $(MKDIR_P)
+
+# When building gettext-tools, we prefer to use the built programs
+# rather than installed programs.  However, we can't do that when we
+# are cross compiling.
+CROSS_COMPILING = @CROSS_COMPILING@
+
+GMSGFMT_ = /usr/bin/msgfmt
+GMSGFMT_no = /usr/bin/msgfmt
+GMSGFMT_yes = /usr/bin/msgfmt
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = /usr/bin/xgettext
+XGETTEXT_no = /usr/bin/xgettext
+XGETTEXT_yes = /usr/bin/xgettext
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_UPDATE = /usr/bin/msgmerge --update
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
+POFILESDEPS_yes = $(POFILESDEPS_)
+POFILESDEPS_no =
+POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
+
+DISTFILESDEPS_ = update-po
+DISTFILESDEPS_yes = $(DISTFILESDEPS_)
+DISTFILESDEPS_no =
+DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update
+
+# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
+# The GNU Coding Standards say in
+# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
+#   "GNU distributions usually contain some files which are not source files
+#    ... . Since these files normally appear in the source directory, they
+#    should always appear in the source directory, not in the build directory.
+#    So Makefile rules to update them should put the updated files in the
+#    source directory."
+# Therefore we put these files in the source directory, not the build directory.
+
+# During .po -> .gmo conversion, take into account the most recent changes to
+# the .pot file. This eliminates the need to update the .po files when the
+# .pot file has changed, which would be troublesome if the .po files are put
+# under version control.
+.po.gmo: $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
+	cd $(srcdir) && \
+	rm -f $${lang}.gmo && \
+	$(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
+	$(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
+	mv t-$${lang}.gmo $${lang}.gmo && \
+	rm -f $${lang}.1po
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: all-yes
+
+all-yes: $(srcdir)/stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+	test "$(GETTEXT_MACRO_VERSION)" = "0.20" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.20" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).
+
+# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
+# have been loosely updated. Its purpose is that when a developer or translator
+# checks out the package from a version control system, and the $(DOMAIN).pot
+# file is not under version control, "make" will update the $(DOMAIN).pot and
+# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
+# timestamp would not be necessary if updating the $(CATALOGS) would always
+# touch them; however, the rule for $(POFILES) has been designed to not touch
+# files that don't need to be changed.
+$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
+	@$(CHECK_MACRO_VERSION)
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch $(srcdir)/stamp-po" && \
+	  echo timestamp > $(srcdir)/stamp-poT && \
+	  mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
+	}
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	package_gnu="$(PACKAGE_GNU)"; \
+	test -n "$$package_gnu" || { \
+	  if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+	         LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU dpkg' /dev/null '{}' ';' 2>/dev/null; \
+	       else \
+	         LC_ALL=C grep -i 'GNU dpkg' $(top_srcdir)/* 2>/dev/null; \
+	       fi; \
+	     } | grep -v 'libtool:' >/dev/null; then \
+	     package_gnu=yes; \
+	   else \
+	     package_gnu=no; \
+	   fi; \
+	}; \
+	if test "$$package_gnu" = "yes"; then \
+	  package_prefix='GNU '; \
+	else \
+	  package_prefix=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_prefix}dpkg" \
+	      --package-version='1.20.7.1' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	esac
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot-header; then \
+	    sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
+	    cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
+	    rm -f $(DOMAIN).1po \
+	    || exit 1; \
+	  fi; \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(POFILESDEPS)
+	@test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           0.1[6-7] | 0.1[6-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+install-dvi install-ps install-pdf install-html:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f $(srcdir)/stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(srcdir)/stamp-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir) || exit 1; \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       0.1[6-7] | 0.1[6-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use /bin/sh, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+	cd $(top_builddir) \
+	  && /bin/sh ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/po/Makefile.in.in dpkg-1.20.7.1/po/Makefile.in.in
--- dpkg-1.20.7.1-orig/po/Makefile.in.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/Makefile.in.in	2021-06-09 18:22:47.474275400 -0500
@@ -0,0 +1,503 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 2000-2019 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# Origin: gettext-0.20
+GETTEXT_MACRO_VERSION = 0.20
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SED = @SED@
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @localedir@
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# @install_sh@ does not start with $(SHELL), so we add it.
+# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+mkdir_p = @mkdir_p@
+
+# When building gettext-tools, we prefer to use the built programs
+# rather than installed programs.  However, we can't do that when we
+# are cross compiling.
+CROSS_COMPILING = @CROSS_COMPILING@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = @MSGMERGE@
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
+POFILESDEPS_yes = $(POFILESDEPS_)
+POFILESDEPS_no =
+POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
+
+DISTFILESDEPS_ = update-po
+DISTFILESDEPS_yes = $(DISTFILESDEPS_)
+DISTFILESDEPS_no =
+DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update
+
+# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
+# The GNU Coding Standards say in
+# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
+#   "GNU distributions usually contain some files which are not source files
+#    ... . Since these files normally appear in the source directory, they
+#    should always appear in the source directory, not in the build directory.
+#    So Makefile rules to update them should put the updated files in the
+#    source directory."
+# Therefore we put these files in the source directory, not the build directory.
+
+# During .po -> .gmo conversion, take into account the most recent changes to
+# the .pot file. This eliminates the need to update the .po files when the
+# .pot file has changed, which would be troublesome if the .po files are put
+# under version control.
+.po.gmo: $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
+	cd $(srcdir) && \
+	rm -f $${lang}.gmo && \
+	$(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
+	$(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
+	mv t-$${lang}.gmo $${lang}.gmo && \
+	rm -f $${lang}.1po
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: all-@USE_NLS@
+
+all-yes: $(srcdir)/stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+	test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).
+
+# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
+# have been loosely updated. Its purpose is that when a developer or translator
+# checks out the package from a version control system, and the $(DOMAIN).pot
+# file is not under version control, "make" will update the $(DOMAIN).pot and
+# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
+# timestamp would not be necessary if updating the $(CATALOGS) would always
+# touch them; however, the rule for $(POFILES) has been designed to not touch
+# files that don't need to be changed.
+$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
+	@$(CHECK_MACRO_VERSION)
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch $(srcdir)/stamp-po" && \
+	  echo timestamp > $(srcdir)/stamp-poT && \
+	  mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
+	}
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	package_gnu="$(PACKAGE_GNU)"; \
+	test -n "$$package_gnu" || { \
+	  if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+	         LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \
+	       else \
+	         LC_ALL=C grep -i 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
+	       fi; \
+	     } | grep -v 'libtool:' >/dev/null; then \
+	     package_gnu=yes; \
+	   else \
+	     package_gnu=no; \
+	   fi; \
+	}; \
+	if test "$$package_gnu" = "yes"; then \
+	  package_prefix='GNU '; \
+	else \
+	  package_prefix=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_prefix}@PACKAGE@" \
+	      --package-version='@VERSION@' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	    ;; \
+	esac
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot-header; then \
+	    sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
+	    cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
+	    rm -f $(DOMAIN).1po \
+	    || exit 1; \
+	  fi; \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(POFILESDEPS)
+	@test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           0.1[6-7] | 0.1[6-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+install-dvi install-ps install-pdf install-html:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f $(srcdir)/stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(srcdir)/stamp-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir) || exit 1; \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       0.1[6-7] | 0.1[6-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use @SHELL@, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+	cd $(top_builddir) \
+	  && @SHELL@ ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/po/Makevars.template dpkg-1.20.7.1/po/Makevars.template
--- dpkg-1.20.7.1-orig/po/Makevars.template	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/Makevars.template	2021-06-09 18:22:47.474275400 -0500
@@ -0,0 +1,82 @@
+# Makefile variables for PO directory in any package using GNU gettext.
+#
+# Copyright (C) 2003-2019 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to use, copy, distribute, and modify it.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
+# package.  (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.)  Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright.  The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This tells whether or not to prepend "GNU " prefix to the package
+# name that gets inserted into the header of the $(DOMAIN).pot file.
+# Possible values are "yes", "no", or empty.  If it is empty, try to
+# detect it automatically by scanning the files in $(top_srcdir) for
+# "GNU packagename" string.
+PACKAGE_GNU =
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+#   in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+#   understood.
+# - Strings which make invalid assumptions about notation of date, time or
+#   money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS =
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used.  It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
+
+# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
+# context.  Possible values are "yes" and "no".  Set this to yes if the
+# package uses functions taking also a message context, like pgettext(), or
+# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
+USE_MSGCTXT = no
+
+# These options get passed to msgmerge.
+# Useful options are in particular:
+#   --previous            to keep previous msgids of translated messages,
+#   --quiet               to reduce the verbosity.
+MSGMERGE_OPTIONS =
+
+# These options get passed to msginit.
+# If you want to disable line wrapping when writing PO files, add
+# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and
+# MSGINIT_OPTIONS.
+MSGINIT_OPTIONS =
+
+# This tells whether or not to regenerate a PO file when $(DOMAIN).pot
+# has changed.  Possible values are "yes" and "no".  Set this to no if
+# the POT file is checked in the repository and the version control
+# program ignores timestamps.
+PO_DEPENDS_ON_POT = yes
+
+# This tells whether or not to forcibly update $(DOMAIN).pot and
+# regenerate PO files on "make dist".  Possible values are "yes" and
+# "no".  Set this to no if the POT file and PO files are maintained
+# externally.
+DIST_DEPENDS_ON_UPDATE_PO = yes
diff -Naurp dpkg-1.20.7.1-orig/po/mr.gmo dpkg-1.20.7.1/po/mr.gmo
--- dpkg-1.20.7.1-orig/po/mr.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/mr.gmo	2021-06-09 18:25:15.262503898 -0500
@@ -0,0 +1,213 @@
+��C4
+�La	=k.��.� 44U�5�-�.
+19$k4�/�$�:6Z1�1�!�#);9e.�'�&�3 5Q � � � � -� H� Q=!A�!7�!<	"BF"�"�"
�" �"�"5#19#k#}##�#!�#�#K�#5E$-{$!�$�$5�$%,3%.`%.�%�%H�%6'&(^&>�&�&�&�&(0(3I(1}(�(�(*�(2�(�&)-�*/�*])+�+G�+8�+,
,:,:Y, �,-�,�,��,��-��.�W/0�"0 �0,�0$�01!1-191!F1h1%�1�1%�1"�1&2<2W2;n23�2�2A�2=3&\3"�3E�3,�3"4-<45j4,�4G�45*35"^5"�5�5�5�5�5�5-
+6)86b6�6)�6�6�6!�6! 7B7%_7%�7�7�7!�7�7 8#=8+a8%�8$�8�8 �89:(9c99�9$�9�9�9:':?:W:!w:�:5�: �:%;5;0U;*�;.�;+�;)<46<;k<<�<:�<7=0W=;�=?�=$>A)>$k>!�>�>�>:�><)?f?'r?	�?"�?!�?�?O@8R@*�@�@7�@5A!<A^AtA5�A"�A4�A
B -B%NBGtB?�B#�B7 C2XCY�C4�CFD1aD;�D �DD�D5E&HE-oE�E.�E�E�E)F/F&LFsF0�F6�F4�F)G%IG%oG�G+�G4�GFH@RH+�H%�H1�H+INCI*�I�I+�I,J0J"KJ$nJ*�J�J*�J&K3,K4`K)�K,�KD�K*1L4\L&�L#�L#�L%M'&M.NM}M!�M4�M4�M[&N,�N4�N#�N,O/5O+eO-�O�O�O2�O&%PBLP1�P*�P6�P&#Q4JQ1Q�Q�Q"�Q	RR(0RYRSuRM�R(S"@ScS{S`�St�S'YU��Vb\W�Wl�WAAXM�Xs�X@EY��YgZb�Z}�ZHc[u�[l"\b�\R�\;E]��]v^f^`�^ G_Ch_s�_� `��`vda��axdb|�b
+Zc*ec+�c-�c[�c�Fd�en�e_(f��f�g2�g1�g1hJGh@�h��h�^i0jBFjc�jc�j;Qk��k�tl�*mK�mA;n�}n.ohDor�os pJ�p��p�hqnr�rr-sFAs��s0Mvk~vw�vgbw%�w�wlxmmx��x��|_U}��}	�~��~��XT�Z��n�Sw��ˁ3V����7�����ƈVS�h��a��u�Q�n�!��$��'ˍg�p[�f̎o3�f��G
+�\R�X��&�x/�e��V��e�Nc�g��T��o�Z��fO�U����v���!�Jŗ��m��L�'b�
��1��Aʙ[��h���I��7՛X
�Qf�A��P��QK�>��cܝj@�Z��/�L6�Z��\ޟ[;�p��s�l|�_�>I�0�����R��d٣Q>�S��E�2*�R]�W��O�sX�ș`@�u��`�Gx�E��y����W�`]�H��j��r���|��n�z��������N"��q�I�Fa�B��G�l3����%D�Yj�,ĲG�Y9�1���ų�o�u
�;��}��=�S��`�Ir�v��H3��|�/,�i\�Yƹ� ����^����zr����{���!�����EB����#R�cv�^��9�wX�[��>,�Qk�K��y	�L��w��lH����X9�\��q��Da�m��������0�d��U?�|��T��g�e-�@�����x\�C��C�Y]�l��P$�qu�t���\���a��z����N'��v�\
�Oj�F����a��{��Nm�F��������:�j����Y ��z�u��}���N��<���"�e����x��bR����\F�����a�-"�>P�S��,��-�g>�X�����������w?�K��(�5,��0����2����cNI)��_��A7�����b�9��ko
+�\V(.al'.nH�x,��t�&0�	!������~6j#{p�S�=1�K!v9���`#
+�id���X�AFP�Z%���G)w>��q�:fz��<y(���4-������3�������/[m�;���-�]T������&��/g� �8���J����
6?R���<1'*+$^ LB���>��EQ|8�""uC3�	e%
�D��$:7C��@@���*�2��O��r�B��4��,YU��+hs�5��;�5�?��=W}M
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+ %d in %s:  %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+'%s' clashes with '%s''%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix; however:
+Authenticating %s ...
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NamePackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Processing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Version[default=N][default=Y][no default]archive has no newlines in headerbroken due to postinst failurecan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)couldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdivert-to may not contain newlinesdiverted by %s to: %s
+done
+duplicate path %sduplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror opening conffiles fileerror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to stderr, discovered before conffile promptfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to write details of '%.50s' to '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefork failedillegal package name at line %d: %.250sinstalledinvalid integer for --%s: '%.250s'link %s is both primary and slavelocally diverted to: %s
+maintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentspackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage may not contain newlinespackage name has characters that aren't lowercase alphanums or '-+.'part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepassed
+pre-dependency problem - not installing %.250spriority must be an integerread error in %.250sread error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package filerequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave link same as main link %ssource file '%.250s' not a plain filestatoverride file contains empty linestripping trailing /subprocess %s returned error exit status %dtarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upunable to (re)open input part file '%.250s'unable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close updated status of '%.250s'unable to create '%.255s'unable to delete control info file '%.250s'unable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to read depot directory '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to seek to start of %.250s after paddingunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to stat %s '%.250s'unable to stat '%.250s'unable to stat current installed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to truncate for updated status of '%.250s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywarningyou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:51+0200
+Last-Translator: Priti Patil <prithisd@gmail.com>
+Language-Team: Marathi <janabhaaratii@cdacmumbai.in>
+Language: mr
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+
+कॉनफिगरेशन फाइल '%s' सिस्टमवर/संगणकावर अस्तित्वात नाही.
+तुमच्या विनंतीनुसार नवीन कॉनफिग फाइलची स्थापना होत आहे.
+     पॅकेजमधील आवृत्ती आणि गेल्यावेळी स्थापन केलेली आवृत्ती या दोन्ही सारख्या आहेत.
+  %.250s (आवृत्ती %.250s) ची स्थापना करायची आहे
+  %.250s हि %s.
+ %.250s ची स्थापना झाली आहे, पण आवृत्ती %.250s आहे.
+  %.250s ची स्थापना झाली नाही.
+  %.250s ची अजुळवणी करायला पाहिजे.
+  %.250s ची स्थापना करायची आहे, पण आवृत्ती %.250s आहे.
+  %.250s काढून टकायला पाहिजे.
+  %.250s हि अनपॅक झाली आहे, परंतु तीची कधीच उजळणी झाली नव्हती 
+  %.250s हि अनपॅक झाली आहे, पण आवृत्ती %.250s आहे.
+  %.250s ची ताजी/लेटेस्ट आवृत्ती हि %.250s आहे.
+  %.250s हे %.250s पुरवतात आणि त्याची स्थापना करायची आहे
+ %.250s हे %.250s पुरवतात पण ते %s आहे.
+  %.250s हे %.250s पुरवतात पण तीची अजुळवणी करायची आहे.
+  %.250s हे %.250s पुरवतात पण ती काढून टाकायची आहे.
+  %s पॅकेजची जुळवणी अद्याप केलेली नाही.
+  %s पॅकेजची स्थापना केलेली नाही.
+ %s पॅकेज काढण्यात यावे.
+  %s पॅकेज जे %s देते त्याची जुळवणी अद्याप केलेली नाही.
+  %s पॅकेज जे %s देते त्याची स्थापना केलेली नाही.
+ %s पॅकेज जे %s देते ते काढुन टाकले पाहिजे.
+ %sची सिस्टमवर/संगणकावर %s आवृत्ती आहे.
+%d %s मध्ये आहे: %s (निव्वळ मजकूर फाइल नाही)
+ ==> जुनी कॉनफिग फाइल डिफॉल्ट म्हणून ठेवत आहे.
+ ==> पॅकेज वितकराने अद्ययावत/अपडेट केलेल्या आवृत्ती पाठवल्या आहेत.
+ ==> तुम्ही विनंती केल्याप्रमाणे चालू जुनी फाइल वापरत आहे.
+ ==> नवीन कॉनफिग फाइल डिफॉल्ट म्हणून वापरत आहे.
+ ==> तुम्ही विनंती केल्याप्रमाणे नवीन फाइल वापरत आहे.
+नवी आवृत्ती स्थापन करणे हि डिफोॅल्ट कृती आहे.
+ तुमची चालू आवृत्ती ठेवणे हि डिफोॅल्ट कृती आहे.
+ आणी च्यावर अवलंबुन %s (उपप्रक्रिया): %s
+`%s' चे `%s' शी वितुष्ट`%s' क्षेत्र, पॅकेजचे नाव अयोग्य `%.255s': %s`%s' क्षेत्र, पॅकेजचे नाव गायब, किंवा पॅकेजच्या नावाच्या अपेक्षित ठिकाणी कचरा`%s' क्षेत्र, संदर्भ `%.255s':
+ `%c' कालबाह्य आहे, त्याएेवजी %c=' किंवा `%c%c' वापरा`%s' क्षेत्र, संदर्भ `%.255s':
+ आवृत्ती नाते खराब %c%c`%s' क्षेत्र, संदर्भ `%.255s': आवृत्ती अ-रहित`%s' क्षेत्र, पॅकेज `%.255s' संदर्भात नियमबाह्य लेखन त्रुटी (नोंद करत आहे %s नाहिसे झाले आहे, ते पुर्णपणे बदलले गेले आहेत.)
+(डेटाबेस वाचत आहे ... (वर्णन उपलब्ध नाही), गाभा अडगळीत टाकला-%c पर्याय मूल्य धारण करत नाही-%c पर्याय मूल्य धारण करतो--%s --पेन्डिंग कोणतिही अपर्यायी आर्ग्युमेन्ट घेत नाही--%s --रिकर्सीव्ह/पुन्हा: पुन्हा: लागणारी गरज कमीतकमी एक पाथ आरग्युमेन्ट--%s साठी <नाव> आवश्यक--%s साठी <नाव> <मार्ग> आवश्यक--%s  साठी .डेब फाइलनाव पर्यायाची गरज आहे--%s साठी  <निर्देशिका> पर्यायाची गरज आहे--%s ला एकच पर्याय आवश्यक--%s  साठी लक्ष निर्देशिकेची गरज आहे.
+कदाचित आपणास डिपिकेजी --इन्स्टाल चा वापर करावा लागेल ?--%s ला कमीतकमी एका पॅकेजच्या अर्काइव्ह फाइलच्या आरग्यूमेंटची गरज आहे--%s कमित कमी एका पॅकेजच्या नावाच्या आर्ग्युमेन्टची/पर्यायीची आवशक्यता आहे--%s पर्याय मूल्य धारण करत नाही--%s पर्याय मूल्य धारण करतो--%s जास्तित जास्त दोनच पर्याय घेउ शकतो (.डेब आणी निर्देशिका)--%s पर्याय घेत नाही--%s फक्त एकच पर्याय घेउ शकतो (.डेब फाइलनाव)--स्वयं साठी फक्त एकच भाग फाइल पर्याय आवश्यक--स्वयं साठी --निर्गम हा पर्याय वापरणे आवश्यक--कंपेअर-वर्जन चुकिचे रिलेशन--कंपेअर-वर्जन तीन पर्याय घेते: <वर्जन> <रिलेशन> <वर्जन>--सर्च साठी कमीतकमी एका फाइलच्या नावाच्या नमुना आवश्यक आहे--तोडा साठी उगम फाइलनाव पर्याय देणे गरजेचे--तोडा साठी जास्तित जास्त उगम फाइलनाव आणी अंतिमस्थान उपसर्ग देता येतात; तथापी:
+%sचा खरेपणा सिद्ध करित आहे...
+ --कंपेअर-वर्जन्स करिता तुलनात्मक ऑपरेटरस्:
+ lt le eq ne ge gt       (रिक्त आवृत्ती हि इतर कोणत्याही आवृत्तींच्या अगोदरची आवृत्ती माना);
+  lt-nl le-nl ge-nl gt-nl (रिक्त आवृत्ती हि इतर कोणत्याही आवृत्तींच्या अगोदरची आवृत्ती माना);
+  < << <= = >= >> >       (फक्त नियंत्रण फाइलच्या वाक्यरचने बरोबरच्या सुसंगतीसाठी).
+
+डेबियन %s आवृत्ती %s.
+डेबियन `%s' पॅकेज बॅकएंड आर्काइव आवृत्ती %s.
+डेबिअन `%s' पॅकेज व्यवस्थापन आज्ञवली आवृत्ति %s.
+डेबियन `%s' पॅकेज तोडा/जोडा टूल; आवृत्ती %s.
+%s.
+ काढून टाकले
+वर्णनप्रक्रियेच्या वेळेला आकस्मिक आलेले दोष:
+फाइल `%.250s' ही एका बहुभाग आर्काइवचा भाग नाही
+वाक्यरचनेचे स्वरूप:
+  स्वरूप हे स्ट्रिन्ग आहे ते प्रत्येक पॅकेजचे आउट्पुट/उत्पादन असेल. स्वरूपात प्रमाणभूत
+  सुटकेचे क्रम \n (नविन ओळ), \r (कॅरिएज रिटर्न) किंवा \\ (प्लेन/नुसता बॅकस्लॅश)
+  समाविष्ट आहेत.  वेरिएबल संदर्भ पॅकेज फिल्डमध्ये/क्षेत्रात ${var[;width]} वाक्यरचना
+  वापरून पॅकेजमध्ये माहिती समाविष्ट करता येते
+  फिल्ड/क्षेत्र उजव्या बाजुला असावे जर व्याप्ती ऋण असेल तर डाव्या बाजुला असावे.
+%s या कॉनफिग फाइलच्या नवीन आवृत्तीची स्थापना करित आहे....
+डेपोॅट निर्दिशिकेत अडगळ शिल्लक आहे
+एकापेक्षा जास्त %s पॅकेजेसची प्रत या रनमध्ये अनपॅक केली आहे ! 
+फक्त एकदाच जुळवणी करून.
+नाव%s हे तात्पुरता थांबलेले आहे, त्याला हात लावत नाही. दुर्लक्ष करण्यासाठी --फोर्स-होल्ड वापरा.
+पॅकेज %s एकापेक्षा जास्त वेळा सुचित केले आहे, पण त्यावर एकदाच प्रक्रिया होते.
+पॅकेज `%s'मध्ये कोणतीही फाइल नाही (!)
+पॅकेजेस अजून रीअसेंबल केली नाहीत:
+प्रक्रिया थांबलेली आहे कारण खुप दोष आहेत.
+%s मधुन %sच्या माहितीची नोंद केली.
+उपलब्द्ध असलेली पॅकेजेसची माहिती %s. वापरून बदलत आहे.
+सेटिंग होत आहे %s (%s) ...
+खालील पॅकेजेसचा स्थापनेच्या वेळी आलेल्या गंभीर समस्येमुळे गोंधळ झालेला आहे. ती व्यवस्थीत
+ चालण्यासाठी त्याची (आणि त्याच्यावर अवलंबुन असलेल्या पॅकेजेसची) पुन्हा एकदा स्थापना करणे
+ जरुरी आहे:
+खालील पॅकेजेसची फक्त अर्धवट जुळवणी झाली आहे, कदाचित ते पहिल्यांदा जुळवणी करत असेल म्हणून
+ह्या समस्या आल्या असतील. डिपिकेजी --कॉनफिगर <package> किंवा डिसिलेक्टमधील कॉनफिगर मेनु पर्याय
+वापरुन जुळवणीचा पुन्हा प्रयत्न करा:
+स्थापनेच्यावेळी आलेल्या समस्यांमुळे खालील पॅकेजेसची फक्त अर्धवट जुळवणी झाली आहे. पुन्हाप्रयत्न करून त्यांची स्थापना पुर्ण होऊ शकते; पॅकेजेस डिसिलेक्ट किंवा डिपिकेजी --रिमूव्हवापरून काढू शकता:
+खालील पॅकेजेस अनपॅक केली आहेत परंतू तिची जुळवणी केलेली नाही. त्यांची जुळवणी डिपिकेजी 
+ --कॉनफिगर किंवा डिसिलेक्टमधील कॉनफिगर मेनू पर्यायाने करू शकता.
+तुमचे झाल्यावर 'एग्झिट' टाइप करा.
+*.डेब फायलींच्या हाताळणीसंबंधी मदतीसाठी डिपिकेजी-डेब --मदत टाइप करा;
+पॅकेजेस् अधिष्ठापन करणे व काढून टाकणे यासाठी डिपिकेजी --मदत टाइप करा.मदतीसाठी डिपिकेजी-तोडा --मदत टाइप कराउपलब्द्ध असलेली पॅकेजेसची माहिती %s. वापरून अद्ययावत करता येते.
+उप्युक्तता: %s [<पर्याय> ...] <आज्ञा>
+
+आवृत्ती[डिफोॅल्ट=एन][डिफोॅल्ट=वाय][डिफोॅल्ट नाही]आर्काइव मधील शिर्षकामधे न्युलाइन नाहीपोस्टइन्स्ट अयशस्वी झाल्यामुळे तुटले आहेपॅकेज इनफो फाईल `%.255s' एममॅप करता येत नाहीजुने पोस्टआरएम/postrm स्क्रिप्ट काढू शकत नाहीपॅकेज इनफो फाईल `%.255s' स्टॅट करता येत नाही`%.255s' (`%.255s' मधील) उघडता येत नाहीआर्काइव भाग फाइल `%.250s' उघडता येत नाहीमाहितीची डिरेक्टरी वाचू शकत नाही%.250s काढणे अशक्य(%.250s'ची) जुनी बॅकप कॉन्फिग फाइल %.250s' काढू शकत नाहीजुनी कॉन्फिग फाइल `%.250s' काढणे अशक्य (= `%.250s')जुन्या फाइलची सुची काढू शकत नाही%.250s साठी प्रि-डिपेन्डसीचे/आधी अवलंबुन रहाणा~या समस्यांचे समाधान करू शकत नाही ( %.250s साठी पाहिजे आहे)`%.255s' निर्देशिका चाळता येत नाही`%.255s' सुधारणा निर्देशिका तपासता येत नाही`%.255s' (`%.255s' मधील) स्टॅट करता येत नाहीचिन्ह `%c' ला अनुमती नाही (फक्त अक्षरे, अंक व चिन्हे `%s')कोॅन्फफाईल `%.250s' पॅकेजमधे आढळत नाहीकोॅन्फफाईल `%.250s' स्टॅट करण्यायोग्य नाही परस्परविरुद्ध कृती -%c (--%s) आणि -%c (--%s)`%.250s' किंवा `%.250s' यामध्ये सामावलेले परस्परविरोधी डाइव्हर्जन्सपरस्परविरोधी पॅकेजेस - %.250sची स्थापना होत नाहीनियंत्रण निर्देशिकेत %03lo खराब परवानग्या आहेत (>=0755 आणी <=0775 आवश्यक)स्ट्रीमसाठी `%i' उघडू शकत नाहीअवलंबून असलेल्या समस्यांमुळे - ज़ुळवणी न करिता सोडून देतेअवलंबुन असलेल्या समस्या - काढून टाकत नाहीवळवा-कडे मधे न्युलाइनस् नसेल%sनी वळवले आहे: %s
+झाले
+पुनरावृत्त मार्ग %sपुनरावृत्त गुलाम साखळी %s`%s' क्षेत्रासाठी मूल्य पुनरावृत्तीवापरकर्त्याने ठरविलेेल्या क्षेत्रात `%.*s' मूल्य पुनरावृत्तीकोॅन्फफाईल वाचताना एफगेट्स कडून रिकामी श्रृंखलाआवृत्तीतील इपोच हा अंक नाहीसमस्या %.250s बंद करत आहे`%.255s' संरचना फाईल बंद करताना त्रुटी`%.255s बंद करताना/लिहिताना त्रुटी `%.255s' उपकरण बनवताना त्रुटी`%.255s' निर्देशिका बनवताना त्रुटी`%.255s' हार्ड साखळी बनवताना त्रुटी`%.255s' पाइप बनवताना त्रुटी`%.255s' प्रतीकात्मक साखळी बनवताना त्रुटी`%.250s'ची खात्री करणारा दोष अस्तित्वात नाहीकोॅन्फफाईल्स फाइल उघडताना त्रुटी%.250s वाचताना त्रुटी%.255s फाइल मधुन %s वाचताना त्रुटीकोॅन्फफाईल्स फाइल वाचताना त्रुटीडिपिकेजी-डेब पाइप मधुन वाचन त्रुटी`%.255s' ची मालकी निश्चित करताना त्रुटी`%.255s' सिमलिंकची मालकी निश्चित करताना त्रुटी`%.255s' च्या परवानग्या निर्धारीत करताना त्रुटी`%.255s'चा समयशिक्का निर्धारीत करताना त्रुटीसमस्या %.250s उघडण्याचा प्रयत्न करत आहेदोष अनकॅचिंग सिग्नल %s: %s 
+`%s' लिहिताना त्रुटीएसटीडीइआरआर लिहिण्यास येणारा दोष हा कॉनफाइल प्रॉम्प्टच्या आधी शोधण्यात आला`%.255s' ला सीएचडीआयआर करता आली नाहीनिर्देशिकेत सीएचडिआयआर करता आले नाही`%.250s'ला  सिएचरूट करण्यास अयशस्वीवाचनानंतर बंद करता आले नाही: `%.255s'निर्देशिका बनवता आली नाहीपाइप बनवणे अयशस्वीएफ़डी %d साठी डीयुपी करणे अयशस्वीएसटीडी%s साठी डीयुपी करणे अयशस्वीआर्काइव एफस्टॅट करता आले नाहीडाइव्हर्जन्स फाइल एफस्टॅट होण्यास अयशस्वीस्टॅटओवरराइड फाइल एफस्टॅट होण्यास अयशस्वीडाइव्हर्जन्स फाइल उघडण्यास अयशस्वीपॅकेज इनफो फाईल `%.255s' वाचनासाठी उघडता आली नाहीस्टॅटओवरराइड फाइल उघडण्यास अयशस्वी`%.255s' (`%.255s' मधील) वाचता आली नाहीआर्काइव `%.255s' वाचता आले नाहीअंतर्भुत सुधारणा फाईल %.255s काढून टाकता आली नाहीमाझी स्वतःची सुधारणा फाईल %.255s  काढून टाकता आली नाही`%.50s' to `%.250s' चे तपशील लिहिता आले नाहीतक्षेत्र नाव `%.*s' नंतर कोलन असणे आवश्यकफाइल `%.250s' भ्रष्ट आहे - %.250s गायबफाइल `%.250s' भ्रष्ट आहे - खराब एमडी५ चेकसम `%.250s'फाइल `%.250s' भ्रष्ट आहे - प्रथम शिर्षकाच्या शेवटी जादुटोणाफाइल `%.250s' भ्रष्ट आहे - दुसऱ्या शिर्षकाच्या शेवटी जादूटोणाफाइल `%.250s' भ्रष्ट आहे - खराब पॅडिंग कॅरॅक्टर (कोड %d)फाइल `%.250s' भ्रष्ट आहे - %.250s नंतर न्यूलाइन गायबफाइल `%.250s' भ्रष्ट आहे - माहिती विभागात रिक्त जागाफाइल `%.250s' भ्रष्ट आहे - दुसरा सदस्य हा डेटा सदस्य नाहीफाइल `%.250s' भ्रष्ट आहे - दिलेल्या भाग क्रमांकासाठी आकार चुकीचाफाइल `%.250s' भ्रष्ट आहे - फारच लहानफाइल `%.250s' भ्रष्ट आहे - दिलेल्या आकारासाठी भागांची संख्या चुकीचीफाइल `%.250s' ही आर्काइव भाग नाहीफाइल `%s' ही आर्काइव भाग नाही
+फाइल मधे न्युलाइनस् नसेलफाइलनाव "%s" हे निरपेक्ष नाहीफायली `%.250s' आणी `%.250s' हे एकाच फाइलचे भाग नाहीतपॅकेज `%.250s'साठी फाइलची सुची असलेल्या फाइलचे फाइलनेम रिकामे आहेविशाख अयशस्वीबेकायदेशीर पॅकेजचे नाव %d ओळीवर: %.250sस्थापना झाली आहे--%sसाठी अयोग्य पूर्णांक : `%.250s'साखळी %s ही प्राथमिक व गुलाम दोन्हीस्थानिक वळवत आहे: %s
+परिरक्षक परिभाषा `%.50s' मधे %03lo खराब परवानग्या आहेत (>=0555 आणी <=0775 आवश्यक)परिरक्षक परिभाषा `%.50s' ही निव्वळ मजकूर फाइल अथवा सिमलिंक नाहीपरिरक्षक परिभाषा `%.50s' स्टॅट करण्यायोग्य नाहीरिकामी श्रृंखला नसावीवळवा-कडे मधे विसंगती
+  `%s'
+ काढून टाकताना  `%s' मिळालेपॅकेजेस् मधे विसंगती
+  `%s'
+ काढून टाकताना  `%s' मिळालेनाव %s हे प्राथमिक व गुलाम दोन्हीक्रियेच्या पर्यायाची आवश्यक्ता आहेक्षेत्र नाव `%.*s' मधे न्यूलाइनसुधार-विकल्प फायलींमधे न्यूलाइन्स ना मनाई (%s)`%.255s' मधे पॅकेजची माहिती नाही`%s' हे नाव नसलेले पॅकेज प्रस्थापित झाले आहे, त्याची जुळवणी शक्य नाहीस्थापना झाली नाहीस्थापना झाली नाही परंतु जुळवणी तशीच आहेआवृत्ती अंकात कोलन नंतर काही नाहीजुन्य़ा पॅकेजच्या आवृत्तीत `%.250s'नी सुरुवात होणारे फारच मोठे माहिती फाइलचे नाव आहेचालू असलेला घटक `%.255s' (%.255s मधील) अनपेक्षित रित्या बंद पडलावीन क्लीनअप नोंदीकरिता मेमरी अपूरीबहुपर्यायांसहित नवीन क्लीनअप नोंदीकरिता मेमरी अपूरीपॅकेज %.250s ची स्थापना आणि जुळवणी आधीच झालेली आहेपॅकेज %.250s हे जुळवणीसाठी तयार नाही
+जुळवणी शक्य नाही (सध्याची स्थिती `%.250s')(%s) पॅकेज आर्किटेक्चर (%s) प्रणाली बरोबर जुळत नाही(`%.50s'नी सुरुवात होणारे) फारच मोठे नियंत्रण माहिती फाइल नाव पॅकेजमध्ये आहे`%.250s' डिरेक्टरी पॅकेजच्या नियंत्रण माहितीमध्ये समाविष्ट आहेपॅकेजची नियंत्रण माहिती `%.250s'ची आरएमडिआयआर/rmdir डिआयआर नाही असे म्हंटले नाहीपॅकेज मधे न्युलाइनस् नसेलपॅकेजच्या नावामध्ये अशी अक्षरे आहेत जी लोअरकेस संख्याअक्षरे किंवा `-+.' नाहीतभाग %d गायब आहेभाग फाइल `%.250s' ही निव्वळ मजकूर फाइल नाहीभाग आकार खुपच मोठा आहे किंवा धन नाही मंजूर झाले
+प्रि-डिपेन्डन्सी समस्या - %.250s स्थापना करत नाहीअग्रक्रम हा पूर्णांकच असला पाहिजे%.250sमध्ये वाचनाची समस्या`%.255s' संरचना फाईलमधे वाचन त्रुटीस्टॅण्डर्ड इनपूटवर दोष वाचाकॉनफाइल प्रॉम्प्टच्या एसटिडिइनवरचा दोष वाचापॅकेज फाइल पुन्हः एकत्र केलीया संक्रियेसाठी सुपरयुझरचे हक्क आवश्यक आहेतशोध घेतला, पण पॅकेजेस (फाइल *.deb) सापडले नाहीअनेक पॅकेज इनफो नोंदी आढळल्या, फक्त एकालाच अनुमतीगुलाम साखळी प्रमुख साखळी %s सारखीचउगम फाइल `%.250s' निव्वळ मजकूर फाइल नाहीस्टॅटओवरराइड फाइलमध्ये रिकामी ओळ/लाइन आहेट्रेलिंग / स्ट्रिप करत आहेउपप्रक्रिया %s कडुन त्रुटी निर्गम स्थिती %dलक्ष्य डिरेक्टरी आहे - नियंत्रण फाइल तपासणी गाळू शकत नाही%d भागाच्या अनेक आवृत्त्या आहेत - कमीतकमी %.250s' आणी `%.250sपॅकेजच्या नव्या आवृत्तीमध्ये स्क्रिप्ट नाही आहे - सोडून देत आहेआगत भाग फाइल `%.250s' (पुन्हा)उघडता येत नाही%.250s'चे अस्तित्व तपासण्यास असमर्थ`%.250s' आर्काइव्हचे अस्तित्व तपासण्यास असमर्थ आहे`%.255s'चे chown सिमलिंक बॅकप घेणे अशक्यअन्य आवृत्ती अधिष्ठापित करण्यापुर्वी `%.255s' भोवतालचा घोळ निस्तारता येत नाही%.250s' ची सुधारित स्थिती बंद करता येत नाही`%.255s' ची रचना करता येत नाहीनियंत्रण माहिती फाइल `%.250s' काढून टाकण्यास असमर्थ आहेवापरलेली डेपोॅट फाइल `%.250s' काढून टाकता येत नाही`%.250s' चा त्याग करता येत नाही%.250s पँडिंगने भरता येत नाहीपँडिंगनंतर %.250s एकजीव करता येत नाही`%.250s' ची सुधारित स्थिती एकजीव करता येत नाहीउगम फाइल एफस्टॅट करता येत नाही%.250s' ची सुधारित स्थिती एफसिन्क करता येत नाही`%.250s' हे `%.250s' म्हणून स्थापना करण्यास असमर्थ आहे`%.250s' नविन माहितीच्या फाइलची स्थापना(गृहीत धरलेले) करण्यास अशक्यनवी माहिती फाइल `%.250s' हिची `%.250s' म्हणून स्थापना करण्यास असमर्थ आहे`%.255s'ची नविन आवृत्ती स्थापन करणे अशक्य%.250s' ची सुधारित स्थिती अधिष्ठापित करता येत नाहीनविन आवृत्ती स्थापन करण्याआधी `%.255s'चे सिमलिंक बॅकप घेणे अशक्य`%.255s'चे सिमलिंक बॅकप घेणे अशक्यनविन आवृत्ती स्थापन करण्यासाठी `%.255s' बाजूला करण्यास अशक्यनवीन डेपोॅट फाइल `%.250s' उघडता येत नाहीनिर्गत फाइल `%.250s' उघडता येत नाहीउगम फाइल `%.250s' उघडता येत नाहीटेम्प/तात्पुर्ती नियंत्रण डिरेक्टरी उघडण्यास अशक्य डिपोॅट निर्देशिका `%.250s' वाचता येत नाही%.250s साठी फाईलडीस्क्रिप्टर फ्लॅग वाचणे जमत नाही`%.255s' साखळी/लिंक वाचण्यास अशक्यभाग फाइल `%.250s' वाचता येत नाही`%.250s'ची नवीन वेचलेली /extracted आवृत्ती काढून टाकण्यास असमर्थ आहे`%.250s'ची नवीन स्थापन केलेली आवृत्ती काढून टाकण्यास असमर्थ आहेपुर्नस्थापना करण्यासाठी `%.250s'ची नवीन स्थापन केलेली आवृत्ती काढुन टाकण्यास असमर्थ आहेअप्रचलित माहिती फाइल `%.250s' काढण्यास अशक्यनवीन डेपोॅट फाइल `%.250s' चे पुनर्नामांकन `%.250s' मधे करता येत नाहीभाग फाइल `%.250s' पुन्हा उघडता येत नाही`%.250s'च्या बॅकप आवृत्तीची पुनर्रचना करण्यास असमर्थ आहेपँडिंगनंतर %.250s च्या सुरूवातीला जाता येत नाही%.250s साठी क्लोज-ऑन-इअेक्सइसी फ्लॅग निश्चित करणे जमत नाही`%.250s' वरिल एग्झिक्युट परवानगी सेट करण्यास असमर्थ आहे%s `%.250s' स्टॅट करण्यास असमर्थ आहे`%.250s' स्टॅट करता येत नाहीचालू स्थापन केलेली `%.250s' कॉनफाइल स्टॅट होण्यास अयशस्वीदुस~या नविन `%.250s फाइलचे स्टॅट करणे अशक्यअन्य आवृत्ती अधिष्ठापित करण्यापुर्वी `%.255s' स्टॅट रिस्टोअर्ड करता येत नाही`%.250s' च्या सुधारित स्थितीत काटछाट करता येत नाही`%.250s' ची सुधारित स्थिती लिहिता येत नाहीपॅकेजनंतर उद्भवलेला अनपेक्षित डेटा आणि %d ओळीवरची निवड%.255s तील %s मधील फाइलचा अनपेक्षित शेवट%d ओळीवर पॅकेजच्या नावानंतर अनपेक्षित उद्भवलेला ओळीचा शेवट/एण्ड ऑफ लाइन%d ओळीवर पॅकेजच्या नावामध्ये अनपेक्षित उद्भवलेला ओळीचा शेवट/एण्ड ऑफ लाइनअपरिचीत पर्याय `%s'अपरिचीत संकोच प्रकार `%s'! अज्ञात फोर्स/रिफ्युज पर्याय `%.*s'अपरिचित पर्याय -%cअपरिचित पर्याय --%s%d ओळीवर अपरिचीत पाहिजे असलेला दर्जा: %.250s अनपॅक्ड परंतु जुळवणी झालेली नाहीसुधारणा निर्देशिकेत असलेल्या `%.250s' या फाइलचे नाव जास्त लांब आहे (लांबी=%d, जास्तीतजास्त=%d)सुधारणा निर्देशिकेत असलेल्या फाईलींच्या नावांची लांबी वेगवेगळी आहे (दोन्ही %d व %d)वापरकर्त्याने ठरविलेेले क्षेत्र नाव `%.*s' फारच छोटेआवृत्ती श्रृंखलेत वेढलेल्या रिक्त जागा आहेतआवृत्ती श्रृंखला रिकामी आहेधोक्याची सुचनातुम्ही पॅकेजेसचा उल्लेख त्यांच्या स्वतःच्या नावानेच करा, ती ज्या फाइलमध्ये आहेतत्यांची अवतरणचिन्हांत नावे देऊ नका
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/nb.gmo dpkg-1.20.7.1/po/nb.gmo
--- dpkg-1.20.7.1-orig/po/nb.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/nb.gmo	2021-06-09 18:25:15.314503977 -0500
@@ -0,0 +1,393 @@
+��L|�$(1?)1ai1=�1&	202-D3.r3�3.�3�3 �344S45o4-�4.�405135$e54�5/�5�5(6$06U6u6:�66�617197!k7(�7�7�7�7�7S8[8z8)�89�8.�8'%9&M9t93�95�9�9�9[:Uc:�:�:�:�:;;!;0;E;V;=e;R�;1�;'(<&P<(w<'�<+�<4�<!)=,K=9x=-�=�=#�=">$A>f>"�>�>!�>#�>2
+?1=?o?.�?�?-�?H�?QG@A�@e�@fAA7�A<�ABB0BsB�B
�B �B�B5�B1#CUCgC#�C!�C�C�CKD5LD-�D!�D�D-�D E5;EqE,�E.�E.�EFH4F6}F(�F>�F$G AGbGiGuG��G6H#CH-gH�H�H�H�H<�H�I�I[�IgJ
�K�L<�M.�MN0,N3]N1�N�N�N��N*�O2�O��OV�Q-�Q/R
IR]WR�R!�R�RG�R8:S,sS�S(�S�S�S�S:TVCT �T�T-�T	�TUU0UMU�TU�%V��V��W��X�LYu�Y&nZ{�Z[�0[ �[5�[,\$8\,]\�\u�\�]�]�]�]4^4;^p^�^6�^!�^	�^._,0_]_|_%�_�_%�_!`")`&L`s`�`;�`3�`a2aAMa�a&�a"�a�aEb,Tb"�b!�b5�b �bc-<c5jc,�cG�c$d:d7Sd�d*�d"�d�de)e?e"[e~e�e=�e*�eJfOf"af�f�f-�f)�f%g9g?g^gdgxg)�g�g�g!�g!h9h%Vh%|h'�h,�h�h*i?i!Tivi �i-�i#�i+j%2j$Xj}j �j�j�j:�jk8kTkqk$�k�k�k�k�k#l8lPl!pl:�l�l5�l "m2Cm%vm�m0�m*�m/n6HnVn<�n.o(Bo+ko)�o4�o4�o;+p<gp:�p7�p0q;Hq?�q$�qA�q$+r!Prrrc�r�r:s<Ms=�s�s�s$�s\t&lt&�t'�t �t'u4+u)`u�u	�uk�u/v$Gv#lv&�v!�v"�v^�v@[w�w%�w+�w7�w!5xWxqx�x�x�x�xO�x83y*ly�y�y�y�y7�y5zAz0az!�z�z�z5�z"{4@{
u{ �{%�{G�{P|Gc|?�|#�|7}+G}2s}Y�}f~&g~4�~F�~1
+;<x�.�.� �0�D=�����&��-Ӏ7�9�A�.G�v������Á)ځ�&!�H�a�Bs�H��&��0&�6W�4��
+Ã
+΃ك
+��%�%*�*P�{���+��+Ä!�$�46�Fk�@��,�R �'s�	��Z��4�25�h�D��GɇY�Qk�%��+�2�%B�%h�1��+��N�;�3U�*����5Ί$�2)�+\�+��,�����"�$9�^�*x���*��0�&�3B�4v�5��)�,�D8�*}�4��ݎ��&�#5�#Y�%}�(��.̏9��'5�*]�.����!Ԑ(��4�4T�[��,�4�#G�,k�"��"��/ޒ/�+>�+j�-��*ē&��1�P� h�2��0��&�B�#W�.{���Ǖ1���3,�`�*����Ŗ6ܖ&�.:�4i�1��+З���"1�T�h�{�(����SԘM(�(v�"��ڙ���`�`v��ךC}�`��A"�(d�!��-��.ݞ�1�M�$k�4��ş.ݟ0�+=�-i�,��#Ġ4�*�H�)^�"����ʡ4�-�)F�#p�$��-��!�$	�.�
+=�DH�!����7ɣ;�1=�/o�/��Ϥ7�G�b�g�op�R�3�J�\�m���������æԦO�d4�F��.�-�-=�,k�3��9̨%�@,�Fm�>���!
�/�#K�o� ����Ī"�C�1J�|�7��ԫ-�L!�`n�DϬn����=�>D���@��ܮ ��&#�J�3j�0��ϯ�)��"%�H�g�I��2а.�'2� Z�'{���.���*�)3�0]�#��D��8��,0�2]�'��$��ݳ����
��$��'δ����+�:>��y��d�p���/�?;�+{���4��A�E5�{������#`�4�����Pc�.��/��T$�y�.~���dſ:*�)e�&��-������	��6�I:�(����@������9�Y��`��0�������������g*�#�����">��a�&��<�BO�#��(����x���`�<�I�V�=o�;���� �:$�$_�
+��-��;��,��"&�8I�/��$��+��+�)/�Y�x�W��C��"2�,U�C��'��3��#"�F�E[�,��#��)��A�'^���.��O��+�GI�����<��#�$,�Q�l����� ��*����H'�+p�H����(���16�9h�4��"����"�#�(�D�+_�'��'��+��,�&4�0[�+��4��3��&!�(H�q�$��%��!��9��+2�@^�.��,����'�>�Z�Bw���)����(�*G�r���%��%��,��("�3K�7�8��"��5�'I�Cq�*��#��7�2<�Ao�O��h�>j�7��%��,�,4�@a�;��L��Q+�8}�=��8��G-�Ju�&��K��#3�W�!v�c�� ��>�=\�A������$�T(�2}�.�� ���& �5G�4}���
+��t��=I� ����'��#��$�c9�E����'��'�6B�"y����������
#�U1�L��+��
��
+�"�I?�G����9��!'�I�b�3��#��?���*)�*T�F�]��T$�Ky�+��?��11�0c�Z��r��1b�4��M��:�GR� ����0��3�#<�	`�Ej�����(��6��C5�	y���.��	��������
+�" �C�/]�����B��T��.S�1��4��8��"�
++�#6�	Z�*d�-��3������*�.9�h�%��;��J��?4�6t�^��$
+�/�W7�5��1����I�Q]�a��_�#q�-��2��'��.�-M�>{�W���@0�1q���@��&�:+�6f�1��5���#�>�,\���2��*��87?0wE�C�E2/x6�X�@8=y��.�#!&E4l,�8�C*K1v.�"�#�1:P<�l�<5Lr-�5�%#%I8o:�3�61N/�*���	$	1D	6v	!�	K�	-
+/I
+(y
+$�
+6�
+!�
+A #b2���-�#(<6e2�+��
&3
Z
m
}
*�
�
]�
N43�%��'�&d=P��RK ���N�$��j�"u!���
+������\*���Q7*����=TJX/�O��ZfGC��;��k���o-��vh���E����[������$��5��m�p��K�	q�������"6�eZr������\(?�Y"@3���J;Bc�ts=BC��'�Hn]q>o.�+vO��w:�V�4UB/ ��g�K�28&)?W�H�j<����6�_�I#��:�%fY�S��5/�%
@��2,�~�T<|�%X������r}�1��3���!�W�2�MD*��x���`&G�}|�.'9�',D
+�
i�(�����L����������4S9��F��<I-��{A7~JRE��>9n5�a����D��E	{�����H�N�bb��Ua8�0����6�]���#�7�l8���;��G(AhA ���)p!Ld����0.w���Iz1����Ms
���:C��)���������_�uQ`+k�F�#����	y��@�������[>z��Ve���0�^$1cF&m�?
+��i�d^�3�l�y4P,���P��-�L=+�x�g�t��
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s depends on %s%s enhances %s%s pre-depends on %s%s recommends %s%s suggests %s%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s requires one or more part file arguments--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Alternative %s unchanged because choice %s is not available.Another process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+Authenticating %s ...
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Errors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Information about %d package was updated.
+Information about %d packages was updated.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+Leaving '%s'
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Nothing to configure.Package %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPriorityProcessing was halted because there were too many errors.
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Removing '%s'
+Replacing available packages info, using %s.
+SelectionSetting up %s (%s) ...
+Skip invalid line: %sSkip unknown alternative %s.StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use --help for help about querying packages.VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+[default=N][default=Y][no default]alternative link is not absolute as it should be: %salternative path is not absolute as it should be: %sany diversion of %sany diversion of %s to %sarchive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerauto modeawaiting trigger processing by another packagebroken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot divert file '%s' to itselfcannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')cannot stat file '%s'character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file contains %ccould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdiversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+dpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is not numbererrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror opening conffiles fileerror opening configuration directory '%s'error reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to '%s'error writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind trigger interest file '%.250s'failed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'fgets gave an empty string from '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefork failedformat version numbergenerated corrupt ar header for '%s'ignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!illegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal pending trigger name '%.255s': %sinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemanual modemaster filemaster linkmay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'multiple Conflicts and Replacesmultiple statoverrides present for file '%.250s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s contained list as info filepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage diverts others to: %s
+package file MD5 checksumpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepre-dependency problem - not installing %.250sprioritypriority must be an integerpriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package fileremoval of %.250sremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filestatoverride file contains empty linestatoverride file is missing final newlinestatusstripping trailing /subprocess %s returned error exit status %dsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving uptoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers looping, abandonedtrying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove backup copy of '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync file '%.255s'unable to sync file '%s'unable to truncate for updated status of '%.250s'unable to write file '%s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file while trying to read %sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?you must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:51+0200
+Last-Translator: Hans Fredrik Nordhaug <hans@nordhaug.priv.no>
+Language-Team: Norwegian Bokmål <i18n-nb@lister.ping.uio.no>
+Language: nb
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+X-Generator: Virtaal 0.6.1
+
+ pakkers utestående utløsere som er eller kan være uløselige:
+
+Oppsettsfila «%s» finnes ikke på systemet.
+Installerer ny oppsettsfil siden du ønsker det.
+     Versjonen i pakken er den samme som ved siste installasjon.
+     ikke en vanlig fil          %.255s
+   Hva vil du gjøre med det? Dine valg er:
+    Y eller I : Installer pakkevedlikeholderens versjon
+    N eller O : Ta vare på den versjonen som er installert
+        D     : Vis forskjellen mellom versjonene
+        Z     : Send denne prosessen til bakgrunnen for å undersøke nærmere
+  %.250s (versjon %.250s) er tilstede og %s.
+  %.250s (versjon %.250s) vil bli installert.
+%.250s er %s.
+  %.250s er installert, men versjonen er %.250s.
+  %.250s er ikke installert.
+  Oppsettet av %.250s skal fjernes.
+  %.250s skal installeres, men versjonen er %.250s.
+  %.250s skal fjernes.
+  %.250s er pakket ut, men er aldri satt opp.
+  %.250s er pakket ut, men versjonen er %.250s.
+  %.250s siste oppsatte versjon er %.250s.
+  %.250s tilbyr %.250s og er tilstede og %s.
+  %.250s tilbyr %.250s og skal installeres.
+  %.250s tilbyr %.250s, men er %s.
+  %.250s tilbyr %.250s, men oppsettet skal fjernes.
+  %.250s tilbyr %.250s, men skal fjernes.
+  %s (%s) tilbyr %s.
+ Pakke %s venter på utløserbehandling.
+  Pakke %s er ikke satt opp enda.
+Pakken %s er ikke installert.
+ Pakke %s skal fjernes.
+ Pakke %s som gir %s venter på utløserbehandling.
+  Pakke %s som gir %s er ikke satt opp enda.
+Pakken %s som gir %s er ikke installert.
+ Pakke %s som gir %s skal fjernes.
+  Versjon av %s på systemet er %s.
+  Versjonen av %s som skal settes opp er %s.
+  lenke er borte for øyeblikket   lenke peker for øyeblikket til %s  slave %s: %s %d i %s:  %d pakke, fra følgende avsnitt: %d pakker, fra følgende avsnitt: %s (%s) ødelegger %s og er %s.
+ %s (ikke en vanlig fil)
+ ==> Tar vare på den gamle oppsettsfila som standard.
+ ==> Pakkedistributøren har gitt ut en oppdatert versjon.
+ ==> Bruker den gamle fila siden du ønsker det.
+ ==> Bruker den nye oppsettsfila som standard.
+ ==> Bruker den nye fila siden du ønsker det.
+ Pakke %s: del(er) Standardhandlinga er å installere den nye versjonen.
+ Standardhandlingen er å ta vare på den versjonen som er installert.
+ og  krever %d fil eller kataloger er for øyeblikket installert.)
+%d filer og kataloger er for øyeblikket installerte.)
+%d etterspurt kontrollkomponent mangler%d etterspurte kontrollkomponenter mangler%s (underprosess): %s
+%s - prioritet %d%s ødelegger %s%s er i konflikt med %s%s korrupt: %s%s krever %s%s forbedrer %s%s før-krever %s%s anbefaler %s %s foreslår %s%s: oppsettsfila «%.250s» er ingen vanlig fil eller symbolsk lenke (= «%s»)%s: oppsettsfila «%.250s» blir til et degenerert filnavn
+ («%s» er en symbolsk lenke til «%s»)%s: oppsettsfila «%s» er en lenke som peker til seg selv
+ (= «%s»)%s: klarte ikke binde inndata til bzip2-strøm%s: klarte ikke binde inndata til gzip-strøm%s: klarte ikke binde utdata til bzip2-strøm%s: klarte ikke binde utdata til gzip-strøm%s: klarte ikke lenke «%.250s» til «%.250s»: %s%s: klarte ikke fjerne «%.250s» (før overskriving): %s%s: klarte ikke fjerne «%.250s»: %s%s: klarte ikke fjerne den gamle sikkerhetskopien «%.250s»: %s%s: klarte ikke fjerne den gamle distribuerte versjonen «%.250s»: %s%s: klarte ikke endre navnet på «%.250s» til «%.250s»: %s%s: intern bzip2-lesefeil%s: intern bzip2-lesefeil: «%s»%s: intern bzip2-skrivefeil%s: intern bzip2-skrivefeil: «%s»%s: intern gzip-lesefeil%s: intern gzip-lesefeil: «%s»%s: intern gzip-skrivefeil%s: intern gzip-skrivefeil: %s%s: intern gzip-skrivefeil: «%s»%s: klarte ikke lese lenken for oppsettsfila «%s»
+ (= «%s»): %s%s: fant ikke oppsettsfila «%s»
+ (= «%s»): %s«%s» er i konflikt med «%s»«%s» inneholder brukerdefinert prioritetsverdi «%s»«%s» skal ikke ha noen verdi«%s»-felt, ugyldig pakkenavn «%.255s»: %s«%s»-felt, manglende pakkenavn eller rot der det skulle være et pakkenavn«%s»-felt, referanse til «%.255s»:
+ «%c» er foreldet, bruk «%c=» eller «%c%c» i stedet«%s»-felt, referanse til «%.255s»:
+ ugyldig versjonsforhold %c%c«%s»-felt, referanse til «%.255s»:
+ implisitt nøyaktig treff med versjonsnummer, foreslår «=» i stedet«%s»-felt, referanse til «%.255s»:
+ versjonsverdien starter med et ikke-alfanumerisk tegn, foreslår å legge til et mellomrom«%s»-felt, referanse til «%.255s»: versjon ikke avsluttet«%s»-felt, syntaksfeil etter referanse til pakken «%.255s»«%s» trenger en verdi(Legg merke til at %s er forsvunnet, og fullstendig erstattet.)
+(Leser database ... (ingen beskrivelse tilgjengelig),  lagret minnetvalget -%c skal ikke ha noen parametervalget -%c trenger en parameter--%s --pending tar ingen parametre som ikke er valg--%s --recursive trenger minst én sti-parameter--%s krever <navn>--%s krever <navn> <sti>--%s krever et .deb-filnavn som parameter--%s krever en <katalog>-parameter--%s krever en <fil>-parameter--%s krever en enkel parameter--%s krever en målkatalog.
+Kanskje du mente å bruke «dpkg --install»?--%s trenger minst én pakkearkivfil som parameter--%s trenger minst ett pakkenavn som parametervalget --%s skal ikke ha noen parametervalget --%s trenger en parameter--%s tar en eller flere delfilparametre--%s tar høyst to parametre--%s tar høyst to parametre (.deb og katalog)--%s tar ingen parametre--%s tar bare én parameter (.deb-filnavn)--auto krev nøyaktig én delfilparameter--auto krever at du bruker alternativet --output--compare-versions ugyldig relasjon--compare-versions tar tre parametre: <versjon> <relasjon> <versjon>--search krever minst ett filnavnsmønster som parameter--split krever et kildefilnavn som parameter--split tar høyst ett kildefilnavn og målprefiks--update oppgitt men %s eksisterer ikke--update er meningsløs for --remove.../%s. Men:
+<komprimer> fra tar -cf<deb> er filnavnet på et arkiv i Debian-format.
+<cfil> er navnet på en administrativ filkomponent.
+<cfelt> er navnet på et felt i 'control'-fila.
+
+<dekomprimer><lenke> og <sti> kan ikke være like<pakkestatus og fremdriftsfilindikator><standard feil><standard inndata><standard utdata>Legger til «%s»
+Alternative %s uendret fordi valg %s ikke er tilgjengelig.En annen prosess har låst databasen for skriving og kan for øyeblikket
+endre den. Noen av de følgende	problemene kan komme av nettopp det.
+Godkjenner %s ...
+Kommandoer:
+  --check-supported                Undersøk om den kjørende dpkg støtter utløsere.
+
+Kommandoer:
+  -s|--split <fil> [<prefiks>]     Del opp et arkiv.
+  -j|--join <del> <del> ...        Føy sammen deler.
+  -I|--info <del> ...             Vis info om en del.
+  -a|--auto -o <alt sammen> <del>   Automatisk samla opp deler.
+  -l|--listq                       List opp deler som ikke passer.
+  -d|--discard [<filnavn> ...]     Vrak deler som ikke passer.
+
+Kommandoer:
+  [--add] <fil>            legg til en omdirigering.
+  --remove <fil>           fjern omdirigeringen.
+  --list [<glob-mønster>]  vis filomdirigeringer.
+  --listpackage <fil>      vis hvilken pakke som omdirigerer filen.
+  --truename <fil>         vis omdirigert fil.
+
+Sammenlikningsoperatorer til --compare-versions er:
+  lt le eq ne ge gt       (se på «ingen versjon» som eldre enn andre versjoner);
+  lt-nl le-nl ge-nl gt-nl (se på «ingen versjon» som nyere enn andre versjoner);
+  < << <= = >= >> >       (bare for kompatibilitet med syntaksen i kontrollfila).
+
+Debian %s pakkehåndteringsprogram spørreverktøy versjon %s.
+Debian %s pakkeutløserprogram versjon %s.
+Debian %s versjon %s.
+Debian «%s» pakkearkiv-bakgrunnsmotor versjon %s.
+Debian «%s» brukergrensesnitt for pakkehåndtering versjon %s.
+Debian «%s» pakkeverktøy for å dele opp/slå sammen; versjon %s.
+Slettet %s.
+BeskrivelseØnsket=Ukjent/Installer/Fjern/Rens ut/Hold tilbake
+| Status=Ikke/Inst/Oppsettsfiler/Ikke pakket ut/HalvT-satt-opp/Halvt-inst/Ut-ventende
+|/ Feil?=(ingen)/Må inst. på nytt (Status,Feil: versalar=dumt)
+Det oppsto feil ved behandling av:
+Fila «%.250s» er ikke en del av et oppdelt arkiv.
+Formatsyntaks:
+  Et format er den strengen som blir brukt for å vise en pakke. Formatet
+  kan inneholde de vanlige escape-sekvensene \n (linjeskift), \r (vognretur)
+  eller \\ (ren omvendt skråstrek). Pakkeopplysninger kan tas med ved
+  å sette inn variabelreferanser til pakkefelt med syntaksen
+  ${var[;bredde]}. Feltene vil være høyrejusterte, med mindre bredden er 
+negativ. I så fall vil de være venstrejusterte.
+Informasjon om %d pakke ble oppdatert.
+Informasjon om %d pakker ble oppdatert.
+Installerer ny versjon av oppsettsfila %s ...
+Søplefiler som ligger igjen i depotkatalogen:
+Forlater «%s»
+Flere kopier av pakken %s er pakket ut i denne
+ omgangen. Setter bare opp én gang.
+NavnIngen omdirigering «%s», ingenting fjernet.
+Ingenting å sette opp.Pakken %s er holdt tilbake, og blir ikke rørt. Bruk --force-hold for å tvinge gjennom behandling.
+Pakken %s er nevnt flere ganger, behandler bare én gang.
+Pakken «%s» inneholder ingen filer (!)
+Pakker som ikke er satt sammen igjen:
+Del %d av pakken %s er lagret (ønsker ennå StiPre-Depends feltPrioritetBehandlingen ble stoppet på grunn av for mange feil.
+Setter sammen pakken %s fra %d del:Setter sammen pakken %s fra %d deler:Tatt vare på informasjon om %s fra %s.
+Fjerner «%s»
+Bytter ut informasjon om tilgjengelige pakker, ved hjelp av %s.
+ValgSetter opp %s (%s) ...
+Hoppet over ugyldig linje: %sHopp over ukjent alternativ %s.StatusDe følgende pakkene venter på behandling av utløsere de har aktivert
+i andre pakker. Denne behandlingen kan bli startet ved å bruke
+dselect eller dpkg --configure --pending (eller dpkg --triggers-only):
+De følgende pakkene er i uorden på grunn av alvorlige problemer under
+installasjonen. De må installeres på nytt for at de (og eventuelle pakker
+som er avhengige av dem) skal virke skikkelig:
+De følgende pakkene er bare halvveis oppsatte, sannsynligvis fordi
+det oppsto problemer første gangen de ble satt opp. Pakkene bør settes
+opp på nytt med «dpkg --configure <pakke>» eller oppsettsmenyen i dselect.
+De følgende pakkene er bare halvveis installerte, fordi det oppsto
+problemer under installasjonen. Installasjonen kan sannsynligvis gjennomføres
+ved å prøve på nytt. Pakkene kan fjernest med dselect eller «dpkg --remove»:
+De følgende pakkene har blitt utløst, men utløserbehandlingen har ikke
+startet enda. Denne behandlingen kan bli startet ved å bruke dselect
+eller dpkg --configure --pending (eller dpkg --triggers-only):
+De følgende pakkene er pakket ut, men er ikke satt opp ennå.
+De må settes opp med «dpkg --configure» eller fra oppsettsmenyen
+i dselect for at de skal virke:
+Det er %d valg for alternativet %s (som tilbyr %s).Det er %d valg for alternativet %s (som tilbyr %s).Det er ingen program som tilbyr %s.Dette er fri programvare. Du finner kopieringsvilkårene i
+GNU General Public Licence versjon 2 eller nyere. Det finnes INGEN garanti.
+Skriv «exit» når du er ferdig.
+Skriv «dpkg-deb --help» for hjelp med endring av *.deb-filer.
+Skriv «dpkg --help» for hjelp med å installere og avinstallere pakker.Skriv «dpkg-split --help» for hjelp.Skriv «dpkg-trigger --help» for hjelp om dette programmet.Oppdaterer opplysninger om tilgjengelige pakker, ved hjelp av %s.
+Bruk: %s [<valg> ... ] <kommando>
+
+Bruk --help for hjelp om pakkespørring.VersjonVersjonen av dpkg med fungerende %s-støtte er ikke satt opp ennå.
+ Kjør «dpkg --configure dpkg» og prøv på nytt.
+Når man legger til er standard --local og --divert <original>.distrib.
+Når man fjerner må --package eller --local og --divert stemme hvis oppgitt.
+Pakke preinst/postrm skript skal alltid oppgi --package og --divert.
+[standard=N][standard=Y][ingen standardhandling]alternativ lenke er ikke absolutt slik som den bør være: %salternativ sti er ikke absolutt slik som den bør være: %senhver omdirigering av %senhver omdirigering av %s til %sarkivet inneholdt objektet «%.255s» med ukjent type 0x%xarkivet mangler linjeskift i hovudetauto modusventer på utløserbehandling fra annen pakkeødelagt på grunn av mislykket fjerning eller installasjonødelagt på grunn av etterinstallasjonsfeilkan ikke installere ukjent valg %sklarte ikke kjøre «mmap» på pakkeinfofila «%.255s»klarte ikke fjerne gammelt etterfjerningsskriptfinner ikke pakkeinfofila «%.255s»kan ikke omdirigere fil «%s» til seg selvklarte ikke åpne «%.255s» (i «%.255s»)klarte ikke åpne arkivdelfila «%.250s»klarte ikke lese infokatalogenklarte ikke fjerne «%.250s»klarte ikke fjerne den gamle sikringskopien av oppsettsfila «%.250s» (fra «%.250s»)klarte ikke fjerne den gamle oppsettsfila «%.250s» (= «%.250s»)klarte ikke fjerne gammel fillisteklarte ikke endre navn på «%s» til «%s»kan ikke oppfylle førkrav for %.250s (ønsket på grunn av %.250s)klarte ikke skanne katalogen «%.255s»klarte ikke skanne oppdateringskatalogen «%.255s»fant ikke «%.255s» (i «%.255s»)fant ikke fil «%s»tegnet «%c» ikke tillatt (bare bokstaver, siffer og tegnene «%s»)oppsettsfila «%.250s» finnes ikke i pakkenfinner ikke oppsettsfila «%.250s»oppsettsfila «%s» er ikke en vanlig filnavnet på oppsettsfila «%s» inneholder avsluttende blanke tegnnavnet på oppsettsfila %s er duplisertoppsettsfeil: %s:%d: %shandlinger i konflikt -%c (--%s) og -%c (--%s)omdirigeringer i konflikt med hverandre, involverer «%.250s» eller «%.250s»pakker i konflikt - installerer ikke %.250skontrollkatalogen har feil rettighet %03lo (må være >=0755 og <=0775)kontrollmappa er ikke ei mappekontrollfila inneholder %cfant ikke den gamle fila «%.250s» så den slettes ikke: %sklarte ikke åpne «%i» for strømkravproblem - setter ikke opp pakkenkravproblem - fjerner ikkeomdirigert av %s fra: %s
+omdirigert av %s til: %s
+omdirigering av %s med %somdirigering av %s til %s med %somdirigering kan ikke inneholde linjeskiftomdirigert av %s til:%s
+ferdig
+dpkg er ikke registrert som installert. Kan ikke undersøke %s-støtte.
+duplikat forventet utløserpakke «%.250s»duplikat utløserinteressefil for filnavn «%.250s» og pakke «%.250s»duplisert sti %sduplikat utestående utløser «%.255s»duplikat slavelenke %sverdien for feltet «%s» finnes mer enn én gangdet brukerdefinerte feltet «%.*s» fins mer enn én gangtom streng fra «fgets» ved lesing av oppsettsfilertomme utløsernavn er ikke tillattepochepoken i versjonen er ikke et tallfeilfeil ved kontroll av «%s»feil ved lukking av %.250sfeil ved lukking av oppsettsfila «%.255s»feil ved lukking/skriving av «%.255s»feil ved oppretting av enhet «%.255s»feil ved oppretting av katalogen «%.255s»feil ved oppretting av hard lenke «%.255s»feil ved oppretting av rør «%.255s»feil ved oppretting av symbolsk lenke «%.255s»klarte ikke sikre at «%.250s» ikke finnesfeil ved kjøring av hook «%s», avslutningskode %dfeil ved formatering av tekst inn i varbuf-variabelfeil ved åpning av «conffiles»-filafeil ved åpning av oppsettsmappa «%s»feil ved lesing av %.250sfeil ved lesing av %s fra fil %.255sfeil ved lesing av «conffiles»-filafeil ved lesing fra dpkg-deb-rørfeil ved lesing av fila «%.250s» for utsattte utløserefeil ved setting av eierskap for «%.255s»feil ved setting av eierskap for den symbolske lenken «%.255s»feil ved setting av rettigheter for «%.255s»feil ved setting av tidsmerke for «%.255s»feil ved åpning av %.250sfeil ved blokkering av signalet %s: %s
+feil ved skriving av «%s»feil ved skriving til «%s»feil ved skriving til standardfeil, oppdage før oppsettsfilpromptklarte ikke allokere minneklarte ikke skifte katalog til «%.255s»klarte ikke skifte til katalogklarte ikke skifte filrot til «%.250s»klarte ikke lukke etter lesing: «%.255s»klarte ikke opprette katalogklarte ikke opprette rørklarte ikke utføre «dup» for fd %dklarte ikke utføre «dup» for std%sklarte ikke finne (fstat) ar-medlemsfil (%s)klarte ikke kjøre «fstat» på arkivetklarte ikke utføre «fstat» på omdirigeringsfilaklarte ikke utføre «fstat» på «statoverride»-filaklarte ikke åpne oppsettsfila «%.255s» for lesing: %sklarte ikke åpne omdirigeringsfilklarte ikke åpne pakkeinfofila «%.255s» for lesingklarte ikke åpne «statoverride»-filaklarte ikke åpne fila «%.250s» med liste over utløserinteresserklarte ikke lese «%.255s» (i «%.255s»)klarte ikke lese arkivet «%.255s»klarte ikke fjerne den innlagte oppdateringsfila %.255sklarte ikke fjerne min egen oppdateringsfil %.255sklarte ikke spolle tilbake fila «%.250s» med utløserinteresserklarte ikke (stat) finne informasjon om eksisterende symbolske lenke «%.250s»klarte ikke (stat) finne informasjon om foreslått nytt symlenke mål «%.250s» for symlenke «%.250s»klarte ikke skrive %s databasepost om «%.50s» til «%.250s»klarte ikke skrive detaljer om «%.50s» til «%.250s»fgets ga en tom streng fra «%.250s»feltnavnet «%.*s» skal følges av et kolonfila «%.250s» er ødelagt - %.250s manglerfila «%.250s» er ødelagt - ugyldig MD5-kontrollsum «%.250s»fila «%.250s» er ødelagt - ugyldig siffer (kode %d) i %sfila «%.250s» er ødelagt - ugyldig magisk nummer sist i det første hodetfila «%.250s» er ødelagt - ugyldig magisk nummer til slutt i det andre hovudetfila «%.250s» er ødelagt - ugyldig fylltegn (kode %d)fila «%.250s» er ødelagt - mangler linjeskift etter %.250sfila «%.250s» er ødelagt - nuller i informasjonsdelenfila «%.250s» er ødelagt - det andre medlemmet er ikke et datamedlemfila «%.250s» er ødelagt - feil størrelse i forhold til opplysning enefila «%.250s» er ødelagt - for kortfila «%.250s» er ødelagt - feil antall deler i forhold til opplysninganefila «%.250s» er ikke en arkivdelfila «%s» er ingen arkivdel
+fil kan ikke inneholde linjeskiftfilutløseroppføring nevner ugyldig pakkenavn «%.250s» (for interesse i fila «%.250s»): %.250sfilenavn «%s» er ikke absoluttfilene «%.250s» og «%.250s» hører ikke til den samme filafillistefila for pakken «%.250s» inneholder et tomt filnavnfillistefila for pakken «%.250s» mangler avsluttende linjeskiftforking mislyktesformatversjonsnummergenererte korrupt ar-hode for «%s»ignorerer %d advarsel om kontrollfilen(e)ignorerer %d advarsler om kontrollfilen(e)ignorerer ødeleggelse, men kan fortsette likevel.ignorerer konflikt, men kan fortsette likevel.ignorerer kravproblem med %s:
+%signorerer problem med førkrav.ugyldig pakkenavn på linje %d: %.250sugyldig pakkenavn i forventet utløser «%.255s»: %sugyldig navn for utestående utløser «%.255s»: %sinstallering av %.255sinstallertinstallering av %.250s vil ødelegge %.250s, og
+ fjerning av oppsett er ikke tillatt (--auto-deconfigure kan hjelpe)installering av %.250s vil ødelegge eksisterende programvareugyldig tegn i revisjonsnummeretugyldig tegn i versjonsnummeretugyldig komprimeringsnivå for -%c: %ldugyldig heltall for -%c: «%.250s»ugyldig heltall for --%s: «%.250s»ugyldig eller ukjent syntaks i utløsernavn «%.250s» (i utløserinteresser for pakken «%.250s»)ugyldig pakkenavn «%.250s» i fila «%.250s» for utsattte utløsereugyldig statusugyldig utløsernavn «%.255s»: %.250slinje ikke avsluttet under lesing av %slinje for lang eller ikke avsluttet under lesing av %slenke %s er både primær og slavelokal omdirigering fra: %s
+lokal omdirigering av %slokal omdirigering av %s til %slokalt omdirigert til: %s
+lokalt omdirigert: %s
+lange filnavnvedlikeholderskriptet «%.50s» har feil rettighet %03lo (må være >=0555 og <=0775)vedlikeholderskriptet «%.50s» er verken en ren fil eller en symbolsk lenkefinner ikke vedlikeholderskriptet «%.50s»manuell modushovedfilhovedlenkekan ikke være en tom strengikke samsvar for divert-to
+  under sletting av «%s»
+  ble «%s» funnetikke samsvar for package
+  under sletting av «%s»
+  ble «%s» funnetflere Conflicts og Replacesflere statustilsidesettelser tilstede for fila «%.250s»navn %s er både primær og slavetrenger et handlingsvalglinjeskift i feltnavn «%.*s»linjeskift forbudt i update-alternatives filer (%s)ingen pakkeinformasjon i «%.255s»ingen pakke med navnet «%s» er installert, kan ikke sette oppikke installertikke installert, men oppsettet ligger inneingenting etter kolonet i versjonsnummeretden gamle oppsettsfila «%.250s» var en tom mappe (og er nå slettet)den gamle fila «%.250s» er den samme som flere nye filer! (Både «%.250s» og «%.250s».)den gamle versjonen av pakken har et altfor langt filnavn som startar på «%.250s»åpning av komponenten «%.255s» (i %.255s) mislyktes på en uventet måteikke nok minne til ny oppryddingsoppføringikke nok minne til ny oppryddingsoppføring med mange parametreoverstyrer problemet fordi --force er slått på:pakken %.250s er installert og satt opp fra førpakken %.250s er ikke klar for oppsett
+ kan ikke sette opp (nåværende status «%.250s»)pakken %.250s er ikke klar for utløserbehandling
+ (nåværende status «%.250s» med ingen utestående utløsere)pakken %s inneholder en liste som informasjonsfilpakkearkitekturen (%s) passer ikke til systemet (%s)pakken inneholder et altfor langt informasjonsfilnavn (starter med «%.50s»)pakkekontrollinformasjonen inneholder katalogen «%.250s»pakkekontrollinformasjon, rmdir av «%.250s» sa ikke «ingen katalog»pakke omdirigerer andre til: %s
+Package-fil MD5-kontrollsumpakken har status %s, men har ventende utløserepakken har status %s, men har utestående utløserepakke kan ikke inneholde linjeskiftpakkenavnpakkenavnet har tegn som verken er små bokstaver, tall eller «-+.»pakkeversjonsnummerdelen %d manglerdelfila «%.250s» er ikke ei vanleg fildelen er altfor stor eller størrelsen er ikke positivdelstørrelsen må være minst %d KiB (for at hodet skal få plass)godkjent
+lim innproblem med førkrav - installerer ikke %.250sprioritetprioritet må være et heltallprioritet for %s: %slesefeil i %.250slesefeil i «%.250s»lesefeil i oppsettsfila «%.255s»lesefeil fra standard-innlesefeil på standard-inn ved oppsettsfilpromptpakkefil satt sammen igjenfjerning av %.250sfjerner manuelt valgte alternativ - bytter %s til automatisk modusendring av navn innebærer at «%s» overskrives av
+  annen fil «%s», ikke tillattendre navn: fjern duplikat gammel lenke «%s»den ønskede handlingen krever superbrukertilgangsøkte, men fant ingen pakker (filer med navn *.deb)fant flere pakkeinformasjonsoppføringer, kan bare ha enslavefilslavelenkeslave-lenke samme som hovedlenke %sslavenavnkildefila «%.250s» er ikke en vanlig fil«statoverride»-fila inneholder en tom linjestatoverride-fila mangler et avsluttende linjeskiftstatusfjerner avsluttende /underprosessen %s returnerte feilstatus %dsyntaksfeil i fila «%.250s» med filutløseresyntaksfeil i statoverrid-filatar bare en parameter, utløsernavnetmålet er en katalog - kan ikke hoppe over kontrollfilsjekkdet finnes flere versjoner av delen %d - iallfall «%.250s» og «%.250s»det finnes ingen skript i den nye versjonen av pakken - gir oppfor lang linje eller manglende linjeskift i «%.250s»syntaksfeil i fila «%.250s» for med utløserinteresser; ugyldig pakkenavn «%.250s»: %.250sutløsernavn inneholder ugyldig tegnutløstci-utløserfila «%.250s» inneholder ulovlig syntaks i utløsernavn «%.250s»: %.250sci-utløserfila inneholder ukjent direktiv «%.250s»ci-utløserfila inneholder ukjent direktivsyntaksutløsere i løkke, forlattprøver å skrive over «%.250s» som også finnes i pakken %.250s %.250sprøver å skrive over «%.250s», som er den omdirigerte versjonen av «%.250s»prøver å skrive over «%.250s», som er den omdirigerte versjonen av «%.250s» (pakke: %.100s)prøver å skrive over katalogen «%.250s» i pakken %.250s %.250s med noe annet enn en katalogto kommandoer oppgitt: --%s og --%sklarte ikke (gjen)åpne inndelfila «%.250s»klarte ikke endre eierskap på målfila «%.250s»klarte ikke sjekke om «%.250s» finnesklarte ikke sjekke fila «%s» sin låsestatusklarte ikke sjekke om arkivet «%.250s» finsklarte ikke endre eierskap til den symbolske lenken «%.255s»klarte ikke rydde opp i rotet rundt «%.255s» før en annen versjon skulle installeresklarte ikke lukke fila «%s»klarte ikke lukke den nye fila «%.250s» for utsattte utløsereklarte ikke lukke oppdatert status for «%.250s»klarte ikke opprette «%.255s»klarte ikke opprette «%.255s» (under behandling av «%.255s»)klarte ikke opprette midlertidig mappeklarte ikke opprette mappe «%.250s» for utløsertilstandklarte ikke slette kontrollinformasjonsfila «%.250s»klarte ikke slette den gamle mappa «%.250s»: %sklarte ikke slette den oppbrukte depotfila «%.250s»klarte ikke slette «%.250s»klarte ikke kjøre %s (%s)klarte ikke etterfylle %.250sklarte ikke tømme %.250s etter etterfyllingklarte ikke tømme fila «%s»klarte ikke tømme oppdatert status for «%.250s»klarte ikke kjøre «fstat» på kildefilaklarte ikke synkronisere oppdatert status for «%.250s»klarte ikke ignorere signalet %s før %.250s ble kjørtklarte ikke installere «%.250s» som «%.250s»klarte ikke installere den (visstnok) nye informasjonsfila «%.250s»klarte ikke installere ny informasjonsfil «%.250s» som «%.250s»klarte ikke installere den nye fila «%.255s» for utsattte utløsereklarte ikke installere ny versjon av «%.255s»klarte ikke installere oppdatert status for «%.250s»klarte ikke lage sikringskopi av lenken «%.255s» før en ny versjon skulle installeresklarte ikke lage sikringskopi av den symbolske lenken «%.255s»klarte ikke flytte «%.255s» for å installere en ny versjonklarte ikke åpne «%.255s»klarte ikke åpne fila «%s»klarte ikke åpne den nye depotfila «%.250s»klarte ikke åpne utfila «%.250s»klarte ikke åpne kildefila «%.250s»klarte ikke åpne den midlertidige kontrollkatalogenklarte ikke åpne ci-utløserfila «%.250s»klarte ikke åpne fila «%.250s» for utsattte utløsereklarte ikke åpne/opprette ny fil «%.250s» for utsattte utløsereklarte ikke lese depotkatalogen «%.250s»klarte ikke lese fila «%.250s» med filutløsereklarte ikke lese fildeskriptorflagg for %.250sklarte ikke lese lenken «%.255s»klarte ikke lese delfila «%.250s»klarte ikke fjerne sikkerhetskopien av «%.250s»klarte ikke fjerne den nyutpakkede versjonen av «%.250s»klarte ikke fjerne den nyinstallerte versjonen av «%.250s»klarte ikke fjerne den nyinstallerte versjonen av «%.250s» for å kunne installere sikringskopien på nyttklarte ikke fjerne den foreldede informasjonsfila «%.250s»klarte ikke endre navnet på den nye depotfila fra «%.250s» til «%.250s»klarte ikke åpne delfila «%.250s» på nyttklarte ikke gjenopprette sikringskopien av «%.250s»klarte ikke sikkert fjerne «%.250s»klarte ikke sikkert fjerne «%.255s»klarte ikke sikkert fjerne den gamle fila «%.250s»: %sklarte ikke søke til starten av %.250s etter etterfyllingklarte ikke sette mellomlagring på %s databasefileklarte ikke sette flagget «close-on-exec» for %.250sklarte ikke sette kjøretillatelse på «%.250s»klarte ikke sette modus på målfila «%.250s»klarte ikke setenv for vedlikeholderskriptfant ikke %s «%.250s»fant ikke %s «%.250s»: %sfant ikke «%.250s»klarte ikke finne kontrollmappafant ikke den installerte oppsettsfila «%.250s»fant ikke den nye distribusjonsoppsettsfila «%.250s»fant ikke annen ny fil «%.250s»fant ikke gjenopprettet «%.255s» før en annen versjon skulle installeresklarte ikke finne (stat) kildefila «%.250s»fant ikke fil for utsattte utløsere «%.250s»klarte ikke synkronisere fila «%.255s»klarte ikke synkronisere fila «%s»klarte ikke klippe for oppdatert status for «%.250s»klarte ikke å skrive fila «%s»klarte ikke skrive den nye fila «%.250s» for utsattte utløsereklarte ikke skrive til status fd %dklarte ikke skrive oppdatert status for «%.250s»ubalansert sitattegn i «%s»uventet bzip2-feiluventet data etter pakke og valg på linje %duventet slutt på fil i %s i %.255suventet slutt på fil under lesing av %suventet slutt på linje etter pakkenavnet på linje %duventet slutt på linje i pakkenavnet på linje %duventet slutt på linje i statoverride-filaukjent parameter «%s»ukjent koprimeringstype «%s»!ukjent tvangs-/avvisningsvalg «%.*s»ukjent valg «%s»ukjent valg -%cukjent valg --%sukjent ønsket-status på linje %d: %.250spakket ut, men ikke satt oppoppdateringskatalogen inneholder fila «%.250s», som har for langt navn (lengde=%d, maks=%d)oppdateringskatalogen inneholder filer med ulike navnelengder (både %d og %d)det brukerdefinerte feltnavnet «%.*s» er for kortversjonsstrengen inneholder mellomromversjonsstrengen er tomklarte ikke vente på underprosessen %sadvarselunder lesing av %s: %sved fjerning av %.250s kunne ikke mappa «%.250s» fjernes: %s - kan mappa være et monteringspunkt?du må gi selve navnet på pakkene, ikke navnene på filene som pakkene ligger i
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/ne.gmo dpkg-1.20.7.1/po/ne.gmo
--- dpkg-1.20.7.1-orig/po/ne.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/ne.gmo	2021-06-09 18:25:15.361504049 -0500
@@ -0,0 +1,250 @@
+��T�
+�\�a�=�&!.Hw.�� �4�)5E-{.�1�$
+4//d$���6�10 1b !� � � )� 9!.>!'m!&�!3�!5�!&","9"N"["p"�"�"�"�"�"-�"H
+#QS#A�#e�#fM$7�$<�$B)%l%�%
�% �%�%5�%1&N&`&#y&!�&�&K�&5('-^'!�'�'5�'�',(.C(.r(�(H�(6
+)(A)>j)�)��)^*gu*�+�,0-3=-1q-�-�-*�-2�-�.-�//�/]0{0G�08�0,1.1(M1:v1 �1-�12�2��2��3�t4 5�?5 �5,�5$666>6J6V66c6!�6�6%�67% 7"F7&i7�7�7;�73�728AO8�8&�8"�8E�8,@9"m9-�95�9,�9G!:i:*�:"�:"�:�:;;';?;-^;)�;�;�;)�;<3<!R<!t<�<%�<%�<�<=!1=S= p=#�=+�=%�=$>,> H>i>:|>�>�>�>$
?2?M?c?{?�?�?!�?�?5@ B@%c@�@0�@*�@.A+4A)`A4�A4�A;�A<0B:mB7�B0�B;C?MC$�CA�C$�C!D;DYD:wD<�D�D'�D	#E"-E!PErEO�E8�E*F?F7WF5�F!�F�F�F5G"PG4sG
�G �G%�GG�G?EH#�H7�H2�HYI4nIF�I1�I;JXJ wJD�J�J&�J-KEK.MK|K�K)�K�K&�KLH4L0}L6�L4�LM%:M%`M�M+�M4�MF�M@CN+�N%�N1�N+ON4O*�O�O+�O,�O!P"<P$_P*�P�P*�P&�P3Q4QQ)�Q,�QD�Q*"R4MR&�R#�R#�R%�R'S.?SnS!�S4�S4�S[T,sT4�T#�T,�T/&U+VU-�U�U�U2�U&VB=V1�V*�V6�V&W4;W1pW�W�W"�W�W
X(!XJXSfXM�X(Y"1YTYlY`tY�YU[wt\I�\_6]�]f�]@^PW^l�^G_r]_S�_p$`u�`Oa�[ay�aofbR�bB)c�lc�dq�dM$ere-�e��e�Df��f�vg�h��h�4i�i1�i+j<=j8zj/�j"�jFk<Mk,�k5�kL�k�:l��l�m�nou'p��p�/q+�q;r$BrCgr1�r}�rs[s8�s?tMHt=�tH�t�u��u��vDwDWwu�w>x\Qx��xw0yK�y~�y�szw{��{|%+|3Q}��}�0%�}V��Ԅ�Y�����c����t��|*����	������4�p��gk�Zӎy.�d���
�/���ڐ0ƒ���
�gИ�8�]����.���.��.-�6\����h�T��_ڝX:�^��E�X8�N��+��l�ky�O��5�]�}@�O����]£; �T\�i��t����I7�{��I��wG�6����"�B1�Nt��èlO�E��6�c9�K��T�`>�a��N�sP�gĬK,�)x�C��E�A,�Xn�pǮG8�p��L�:>�:y����dN�G��3��D/�Nt�<ò7�78�5p�7��9޳4�xM�6ƴ=��7;�ms�i�EK�s��K�UQ�^�������v�r��m��xk���B~����On�L��e�4q�i������Kپ%�H;�S��Jؿ�#����]r�E��N�je�N��B�=b����A=���+5�ba�f���+�n��xP����yo����h��������a�P��d4����,X�F��n��;�{V�P��<#�h`�K��p�X���������<����R��L��b;�(��y���A�����d�T��QL�{�������v{�;��a.�h��(��?"�Jb�w��I%��o�[��vO����eL����2�e���6�R��K�E^�p��W�|m�4��B�gb�m���8�]�|z�S��K�T��w �q��8
+�5C�ay�Q���-����m�s��bb����}Q�$��A��Q6�)��*��X��H6����]�r*�|��E�`�+v�JA1��+f0�:+�}�U���L�5
+I%��maCZM�t�D��kj�g*x�Q�GX����"./i�8
+(K��#�����{����8~�����
��e�?��SHObTz-;$H��'N9�����	��0��JP3S�� ��s<��?p����LC"R/N�2�c����A�3Y7�Oo,�#�`QF<�^[';�M@��\)K��v��I4���%�=�6���1�P�ly���6]�.���BE w,_�V!|���*!5u�:��&�F	�h�G��n�R�B4
7��-�$qD���d=r�@�&��)�>W(�ET9�2>�
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+ %d in %s:  %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+%s breaks %s%s conflicts with %s%s depends on %s%s enhances %s%s pre-depends on %s%s recommends %s%s suggests %s'%s' clashes with '%s''%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix; however:
+<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+Authenticating %s ...
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NamePackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want Processing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Version[default=N][default=Y][no default]archive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerbroken due to postinst failurecan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)couldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdivert-to may not contain newlinesdiverted by %s to: %s
+done
+duplicate path %sduplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror opening conffiles fileerror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to stderr, discovered before conffile promptfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to write details of '%.50s' to '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefork failedillegal package name at line %d: %.250sinstalledinvalid integer for --%s: '%.250s'link %s is both primary and slavelocally diverted to: %s
+maintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentspackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage diverts others to: %s
+package may not contain newlinespackage name has characters that aren't lowercase alphanums or '-+.'part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepassed
+pre-dependency problem - not installing %.250spriority must be an integerread error in %.250sread error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package filerename involves overwriting '%s' with
+  different file '%s', not allowedrequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave link same as main link %ssource file '%.250s' not a plain filestatoverride file contains empty linestripping trailing /subprocess %s returned error exit status %dtarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upunable to (re)open input part file '%.250s'unable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close updated status of '%.250s'unable to create '%.255s'unable to delete control info file '%.250s'unable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to read depot directory '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to seek to start of %.250s after paddingunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to stat %s '%.250s'unable to stat '%.250s'unable to stat current installed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to truncate for updated status of '%.250s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywarningyou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:51+0200
+Last-Translator: Nabin Gautam <nabin@mpp.org.np>
+Language-Team: Nepali <info@mpp.org.np>
+Language: ne
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=n != 1;
+X-Generator: KBabel 1.11.4
+
+कन्फिगरेसन फाइल`%s', तपाईँको प्रणालीमा अवस्थित छैन ।
+तपाईँको अनुरोध अनुसार नयाँ कन्फिगर फाइल स्थापना गर्दै ।
+    प्याकेजमा संस्करण अन्तिम स्थापना बराबर छ ।
+     एउटा सादा फाइल होइन          %.255s
+  %.250s (संस्करण %.250s) स्थापित हुनु पर्दछ ।
+  %.250s  %s हो ।
+  %.250s स्थापना गरिएको छ, तर संस्करण %.250s मा ।
+  %.250s स्थापना गरिएको छैन ।
+  %.250s लाई डिकन्फिगर गर्नु पर्छ ।
+  %.250s स्थापित हुनु पर्दछ, तर संस्करण %.250s मा ।
+  %.250s लाई हटाएको हुनु पर्दछ ।
+  %.250s खोलिएको छ, तर कहिले पनि कन्फिगर गिरिएन ।
+  %.250s खोलिएको छ, तर संस्करण %.250s मा ।
+  %.250s अन्तिमा कन्फिगर गरिएको संस्करण %.250s हो ।
+  %.250s ले %.250s प्रदान गर्दछ र स्थापित हुनु पर्दछ ।
+  %.250s ले %.250s प्रदान गर्दछ तर %s हो ।
+  %.250s ले %.250s प्रदान गर्दछ तर डिकन्फिगर गरिएको हुनुपर्दछ ।
+  %.250s ले  %.250s प्रदान गर्दछ तर हटाइएको हुनु पर्दछ ।
+  प्याकेज %s अहिले सम्म कन्फिगर गरिएको छैन ।
+  प्याकेज %s स्थापना गरिएको छैन ।
+  प्याकेज %s हटाइनु पर्दछ ।
+  प्याकेज %s जसले %s प्रदान गर्दछ अहिले सम्म कन्फिगर गरिएको छैन ।
+  प्याकेज %s जसले %s प्रदान गर्दछ अहिले सम्म स्थापना गरिएको छैन ।
+ प्याकेज %s जसले %s हटाउन सक्ने प्रदान गर्दछ ।
+   %s को संस्करणमा प्रणाली %s हो ।
+ %d मा %s:  %s (खाली फाइल होइन)
+ ==> पुरानो कन्फिग फाइल पूर्वनिर्धारितको रुपमा राख्दैछ ।
+ ==>एउटा अद्यावधिक संस्करण प्याकेज वितरकलेग सि गरेकोप ण छ ।
+ ==> तपाईँको अनुरोधको रुपमा हाल पुरानो फाइल प्रयोग गर्दैछ ।
+ ==> नयाँ कन्फिग फाइल पूर्वनिर्धारितको रुपमा प्रयोग गर्दैछ ।
+ ==> तपाईँको अनुरोधको रुपमा नयाँ फाइल प्रयोग गर्दैछ ।
+ पूर्वनिर्धारित कार्य नयाँ संस्करण स्थापना गर्नलाई हो ।
+ तपाईँको हालको संस्करण पूर्वनिर्धारित कार्य राख्नका लागि हो ।
+र यसमा निर्भर गर्दछ %s (उपप्रक्रिया): %s
+%s ले %s लाई विच्छेद गर्दछ%s सँग %s द्वन्द्व गर्दछ%s मा निर्भर हुन्छ %s%s ले %s बढाउँदछ%s पहिले नै %s मा निर्भर हुन्छ%s ले %s लाई सिफारिश गर्दछ%s ले %s सुझाव दिन्छwith `%s' सँग `%s' द्वन्दहरू `%s' फाँट, अवैध प्याकेज नाम `%.255s': %s`%s' फाँट, हराएको प्याकेज नाम, वा फोहर जहाँ प्याकेज नाम आशा गरियो`%s' फाँट, लाई निर्देशन`%.255s':
+ `%c' अप्रचलित छ , साट्टोमा `%c=' वा `%c%c' प्रयोग गर्नुहोस्`%s' फाँट, लाई निर्देशन`%.255s':
+खराब संस्करण संम्बन्ध %c%c`%s' फाँट, लाई निर्देशन `%.255s':
+ सूचित संस्करण नम्बरमा ठ्याकै मिल्यो, साटोमा `=' प्रयोग गर्न सुझाव छ`%s' फाँट, लाई निर्देशन `%.255s':
+ संस्करण मान अल्फा सङ्ख्यात्मक नहुने देखि सुरू हुन्छ, खाली ठाँउ थप्न सुझाव गरिन्छ ।`%s' फाँट, `%.255s' लाई सन्दर्भ: समाप्त नभएको संस्करण`%s' फाँट, प्याकेज `%.255s' लाई सन्दर्भ पछि वाक्य संरचना त्रुटि( %s को केहिपनि हराएको छैन, ति सम्पुर्ण रुपमा प्रतिस्थापन गरिएको छ)
+(डेटावेश पढ्दै ... (कुनै वर्णन उपलब्ध छैन), कोर थुप्रियो-%c विकल्पले एउटा मान लिदैन-%c ले एउटा मान लिन्छ--%s -विचाराधिनले कुनै विकल्प बिहिन तर्कहरू लिदैन--%s --कम्तिमा एक मार्ग तर्क पुनरावृती आवश्यक छ--%s लाई <name> आवश्यक पर्दछ--%s लाई <name> <path> आवश्यक पर्दछ--%s लाई .deb फाइलनाम तर्क आवश्यक छ--%s लाई <directory> आवश्यक पर्दछ--%s लाई एकल तर्क आवश्यक पर्दछ--%s लाई लक्षित डाइरेक्टरी आवश्यक छ ।
+सम्भवत तपाईँलाई dpkg --स्थापना प्रयोग गर्नु पर्दछ ?--%s लाई कम्तिमा एउटा प्याकेज सङ्ग्रह फाइल तर्क आवश्यक छ--%s लाई कम्तिमा पनि एउटा प्याकेज नाम तर्क आवश्यक पर्दछ--%s विकल्पले एउटा मान लिदैन--%s विकल्पले एउटा मान लिन्छ--%s ले बढिमा दुई तर्कहरू (.deb र डाइरेक्टरी) लिन्छ--%s ले कुनै तर्कहरू लिदैन--%s ले एक मात्र (.deb फाइलनाम) तर्क लिन्छ--वास्तविक एक भाग फाइल तर्क स्वचालित आवश्यक पर्दछ--निर्गात विकल्पको प्रयोग स्वाचालित--आवश्यक छ--compare-संस्करणहरू खराब सम्बन्ध--compare-संस्करणले तिनवटा तर्कहरू लिन्छ: <version> <relation> <version>--खोजीलाई कम्तिमा पनि एउटा फाइलनाम बान्की तर्क आवश्यक पर्दछविभाजनलाई स्रोत फाइलनाम तर्कको आवश्यक पर्दछ--विभाजनले बढीमा स्रोत फाइलनाम र गनतब्य उपसर्ग लिन्छ; यद्यपी:
+<deb> डेवियन ढाँचा सङ्ग्रहको फाइलनाम हो ।
+<cfile> एउटा प्रशासनिक फाइल अवयवको नाम हो ।
+<cfield> मुख्य `control' फाइलमा फाँटको नाम । 
+
+प्रमाणित गर्दैछ %s ...
+आदेशहरू:
+  -s|--विभाजन गर्नुहोस् <file> [<prefix>]     एउटा सङ्ग्रह विभाजन गर्नुहोस् ।
+  -j|--जडान गर्नुहोस् <part> <part> ...      भागहरू संगै जडान गर्नुहोस् ।
+  -I|--सूचना <part> ...             एउटा बागको बारेमा सूचना प्रदर्शन गर्नुहोस् ।
+  -a|--auto -o <complete> <part>   भागहरू स्वत संचय गर्नुहोस् ।
+  -l|--listq                        मेल नखाएका टुक्राहरू सूचि गर्नुहोस् ।
+  -d|--छोड्नुहोस् [<filename> ...]    मेल नखाएका टुक्राहरू छोड्नुहोस् ।
+
+तुल्नात्मक-संस्करणहरुको लागि -- तुल्नात्मक सञ्चालकहरू:
+  lt le eq ne ge gt       (कुनै संस्करण भन्दा खाली संस्करणको रुपमा पहिलेको संस्करणलाई व्यवहार गर्नुहोस्);
+  lt-nl le-nl ge-nl gt-nl (कुनै संस्करण भन्दा खाली संस्करणको रुपमा पछिको संस्करणलाई व्यवहार गर्नुहोस्);
+  < << <= = >= >> >       (नियन्त्रण फाइल सिन्ट्याक्स सँग मिल्दोको लागि मात्र) ।
+
+डेबियन %s संस्करण %s 
+डेबियन `%s' प्याकेज सङ्ग्रह ब्याकइन्ड संस्करण %s ।
+डेवियन `%s' प्याकेज ब्यवस्थापन कार्यक्रम संस्करण %s .
+डेवियन `%s' प्याकेज उपकरण विभाजन/जडान गर्नुहोस्;संस्करण %s ।
+%s मेटियो ।
+बर्णनप्रक्रिया गरिको बेलामा त्रुटिहरू सँग सामना गर्यो:
+फाइल `%.250s' बहुँभाग सङ्ग्रहको भाग होइन ।
+ढाँचाबद्ध वाक्य संरचना:
+  ढाँचा स्ट्रिङ हो जो प्रत्येक प्याकेजको लागि निर्गात हुनेछ । ढाँचाले
+   छोडिएका मानक अनुक्रमहरू \n (newline), \r (carriage
+  return) वा \\ (plain backslash) समावेश गर्न सक्छ । प्याकेज फाँटहरुमा ${var[;width]} वाक्यसंरचना प्रयोग गरेर चल सन्दर्भहरू घुसाएर सूचनाहरू समावेश गर्न सकिन्छ ।
+चौडा नकारात्मक भएता पनि फाँटहरू सही संलग्न छन् जुन केसमा छोडिएका रेखाहरू प्रयोग हुनेछन् । 
+
+कनफिग फाइल %s को नयाँ संस्करण स्थापना गर्दै ...
+जंक फाइलहरू डिपोट डाइरेक्ट्री वरिपरि छोडिन्छ:
+प्याकेज %s को एक भन्दा बढि प्रतिलिपिहरु चालमा 
+ खोलिएका छन् ! एक पटक मात्र कन्फिगर गर्नुहोस्
+नामप्याकेज %s पर्खाइमा छ, यसलाई नछोइकन ।  अधिलेखन गर्न Use --force-hold 
+प्याकेज %sले एक पटक भन्दा बढि सूचीबद्ध गर्दछ, प्रक्रिया गर्ने मात्र एक पटक ।
+प्याकेज `%s' ले कुनै पनि फाइल समाहित गर्दैन (!)
+प्याकेजहरू अहिले सम्म पुन:जोडिएको छैन:
+भाग %d को प्याकेज %s भरियो (अझै चाहन्छअति धेरै त्रुटिहरू भएकाले प्रक्रिया रोकियो ।
+%s बाट %s का बारेमा रेर्कड गरिएको सूचना ।
+%s प्रयोग गर्दै, उपलब्ध प्याकेजका सूचना प्रतिस्थापन गर्दै ।
+सेटिङ् गर्दै %s (%s) ...
+निम्न प्याकेजहरू स्थापना
+गर्दाको  गम्भिर समस्याहरुको कारणले झन्झटमा छन् ।  तिनिहरू (र कुनै प्याकेजहरू
+जुन तिनिहरुमा भर पर्दछन्) लाई राम्रो सँग कार्यगर्नका लागि पून स्थापना गर्नु पर्दछ:
+सम्भवत पहिलो पटक
+कन्फिगर गर्दाको समस्याका कारणले गर्दा निम्न प्याकेजहरू मात्र आधा कन्फिगर गरिएका छन् ।  कन्फिगरेसन 
+dpkg --configure <package> प्रयोग गर्दै वा 'चयन हटाउनुहोस' मेनु विकल्पको प्रयोग गर्दै पून प्राप्ति गर्नु पर्दछ:
+स्थापना गर्दाको समस्याको कारणले गर्दा
+निम्न प्याकेजहरू मात्र आधा स्थापना भएको छ ।  सम्भवत सो स्थापना त्यो पून प्राप्तिद्धारा पुरा गर्न सकिन्छ;
+प्याकेजहरू dselect वा dpkg --हटाउनुहोस् प्रयोग गरेर हटाउन सकिन्छ:
+निम्न प्याकेहरू खोलिएका छन् तर अहिले सम्म कन्फिगर गरिएको छैन ।
+तिनिहरुलाई कामका लागि 'चयन हटाउनुहोस्' कन्फिगर मेनु विकल्पमा वा dpkg --कन्फिगर 
+प्रयोग गरेर कन्फगर गर्नुपर्दछ:
+तपाईँले गरिसके पछि 'exit' टाइप गर्नुहोस् ।
+*.deb फाइलहरु मिलाउन मद्दतको लागि dpkg-deb --help टाइप गर्नुहोस्;
+प्याकेजहरुको स्थापना गर्ने र स्थापनाबाट हटाउने बारेमा मद्दत गर्नको लागि dpkg --help टाइप गर्नुहोस् ।मद्दतको लागि dpkg-split --help टाइप गर्नुहोस्%s प्रयोग गर्दै, उपलब्ध प्याकेज सूचनाहरू अद्यावधिक गर्दै ।
+उपयोग: %s [<option> ...] <command>
+
+संस्करण[पूर्वनिर्धारित=N][पूर्वनिर्धारित=Y][पूर्वनिर्धारित छैन]सङ्ग्रहले अज्ञात प्रकारको वस्तु `%.255s' समावेश गर्यो 0x%xसङ्ग्रहमा हेडरमा कुनै पनि न्युलाइन छैनpostinst को असफलताको कारणले बिग्रियोप्याकेज सूचना फाइल`%.255s' mmap गर्न सकिदैनपुरानो postrm स्क्रिप्ट हटाउन सक्दैनप्याकेज सूचना फाइल `%.255s' तोक्न सकिदैन`%.255s'लाई (`%.255s'मा) खोल्न सकिदैनसङ्ग्रह भाग फाइल `%.250s' खोल्न सकिदैनसूचना डाइरेक्टरी पढ्न सक्दैन`%.250s' हटाउन सक्दैनपुरानो कन्फिग फाइल `%.250s' (of `%.250s') हटाउन सक्दैनपुरानो कन्फिग फाइल `%.250s' (= `%.250s') हटाउन सक्दैनपुरानो फाइल सूची हटाउन सक्दैन %.250s ( %.250sकारणले चाहियो) का लागि पूर्व-निर्भरता सन्तुष्ट गर्न सकिदैनडाइरेक्टरी `%.255s' स्क्यान गर्न सकिदैनअद्यावधिक डाइरेक्टरी `%.255s' स्क्यान गर्न सक्दैन ।`%.255s'लाई (`%.255s'मा) सुरू गर्न सकिदैनक्यारेक्टर `%c' अनुमति छैन (अक्षर, अङ्कहरू र क्यारेक्टरहरू `%s'लाई मात्र)कन्फफाइल `%.250s' प्याकेजमा देखा पर्दैनकन्फफाइल `%.250s' स्थिर छैनद्धन्दात्मक कार्यहरू -%c (--%s) र -%c (--%s)द्धन्दात्मक diversionsले`%.250s' or `%.250s' संलग्र गर्दैपरस्पर-विरोधी प्याकेजहरू %.250s स्थापना नगर्दैनियन्त्रण डाइरेक्टरीमा खराब अनुमतिहरू %03lo छन्(हुन पर्ने >=0755 र <=0775)प्रवाहका लागि`%i' खोोल्न सकेननिर्भरता समस्याहरू - कन्फिगरेसन नगरेको छोड्दैनिर्भरता समस्याहरू - हट्दैनयसमा फेर्नेले नयाँरेखाहरू समावेश नगर्न सक्छ%s द्धारा %s मा फेरिएको
+पूरा भयो
+नक्कल मार्ग %sनक्कल प्रति स्लेभ लिङ्क %sफाँट`%s' का लागि नक्कल प्रति मानप्रयोगकर्ता-परिभाषित फाँट`%.*s' का लागि नक्कल प्रति मानfgets पढ्ने कन्फफाइलहरूबाट रित्तो स्ट्रिङ्संस्करणमा इपोच नम्बर होइन%.250s बन्द गर्दा त्रुटिकन्फिगरेसन फाइल`%.255s' बन्द गर्दा त्रुटिबन्द गर्दा/लेख्दा `%.255s' त्रुटियन्त्र `%.255s' सिर्जना गर्दा त्रुटिडाइरेक्टरी `%.255s' सिर्जना गर्दा त्रुटिहार्ड लिङ्क `%.255s' सिर्जना गर्दा त्रुटिपाइप `%.255s' सिर्जना गर्दा त्रुटिप्रतिकात्मक लिङ्क `%.255s' सिर्जना गर्दा त्रुटित्रुटि सुनिश्चित गर्ने `%.250s' अवस्थित छैनकन्फफाइल फाइल खोल्दा त्रुटि%.250s पढ्दा त्रुटिफाइल %.255s बाट %s पढ्दा त्रुटिकन्फाइल फाइल पढ्दा त्रुटिdpkg-deb पाइपबाट पढ्दा त्रुटि`%.255s' को स्यामित्व सेट गर्दा त्रुटिसिमलिङ्क `%.255s'को स्वामित्व सेट गर्दा त्रुटि`%.255s'को सेटिङ् अनुमति त्रुटि`%.255s' को टाइमस्टाम्पहरू सेटिङ् गर्दा त्रुटि%.250s खोल्न प्रयास गर्दा त्रुटिअन-क्याचिङ् त्रुटि %s: %s
+लेख्दै गर्दा त्रुटि `%s'stderr लाई लेख्दा त्रुटि, कन्फफाइल प्रोम्ट पहिले पत्ता लगाइयो`%.255s' मा डाइरेक्टरी परिवर्तन गर्न अक्षमडाइरेक्टरीलाई chdir गर्न असफल`%.250s' लाई chroot गर्न असफलपढे पछि बन्द गर्न असफल: `%.255s'डाइरेक्टरी सिर्जना गर्न असफलपाइप सिर्जना गर्न असफलfd %d का लागि dub गर्न असफलstd%s का लागि dup गर्न असफलसङ्ग्रह fstat गर्न असफलdiversions फाइल fstat गर्न असफलstatoverride फाइल fstat गर्न असफलdiversions फाइल खोल्न असफलप्याकेज सूचना फाइल `%.255s' पढ्नका लागि खोल्न असफलstatoverride फाइल खोल्न असफल`%.255s'लाई (`%.255s'मा ) पढ्न असफलसङ्ग्रह`%.255s' पढ्न असफलसमाहित अद्यावधिक फाइल %.255s हटाउन असफल भयो ।मेरो आफ्नै अद्यावधिक फाइल %.255s हटाउन असफल `%.50s' मा `%.250s' विवरण लेख्न असफलफाँट नाम `%.*s' विरामचिन्ह द्धारा साथ दिनु पर्छफाइल `%.250s' दूषित छ - %.250s हराइरहेछफाइल `%.250s' दूषित छ - खराब MD5 चेकसम `%.250s'फाइल `%.250s' दुषित छ - खराब अङ्क (कोड %d) मा %sफाइल `%.250s' दुषित छ - पहिलो हेडरको समाप्तीमा खराब जादुफाइल `%.250s' दूषित छ - दोस्रो हेडरको समाप्तिमा खराब जादूफाइल `%.250s' दूषित छ - खराब गद्दा क्यारेक्टर (कोड %d)फाइल `%.250s' दूषित छ - %.250s पछि नयाँ लाइन हरटाइरहेछफाइल `%.250s' दूषित छ - सूचना सेक्सनमा शून्यहरूफाइल `%.250s' दूषित छ - दोस्रो सदस्य डेटा सदस्य होइनफाइल `%.250s' दूषित छ - उद्धरण गरिएको भाग नम्बरको लागि साइज गलत छफाइल `%.250s' दूषित छ - अति छोटोफाइल `%.250s' दूषित छ -उद्धरण गरिएको साइजहरुको लागि भागहरुको गलत नम्बरफाइल `%.250s' एउटा सङ्ग्रह भाग होइनफाइल `%s' एउटा सङ्ग्रह भाग होइन
+फाइले नयाँरेखा समावेश नगरेको हुन सक्छफाइलनाम "%s" स्थिर छैनफाइलहरू `%.250s' र `%.250s'  उही फाइलका भागहरू होइनरित्तो फाइलनाम समाहित गर्ने प्याकेज `%.250s' का लागि फाइलको सूची फाइलफ्रोक असफललाइन %d: %.250s मा अवैध प्याकेज नामस्थापित--%s का लागि इन्जिटर अवैध: `%.250s'   %s लिङ्क प्राथमिक र स्लेभ दुबै होस्थानिय रुपमा तिर मोडिएको: %s
+मर्मत गर्ने स्क्रिप्ट `%.50s' संग खराब अनुमतिहरू %03lo छन् (हुनुपर्ने >=0555 र <=0775)मर्मत गर्ने स्क्रिप्ट `%.50s' एउटा सादा सिमलिङ्क वा फाइल होइनमर्मत गर्ने स्क्रिप्ट `%.50s' स्थिर छैनरित्तो स्ट्रिङ् होइन होला%s' हटाउदा 
+  divert-to मा
+  `%s' फेला पर्यो `%s' हटाउदा प्याकेजमा
+  `%s' बेमेल
+  फेला पर्यो %s नाम प्राथमिक र स्लेभ दुबै होएउटा कार्य विकल्प आवश्यकफाँट नाम `%.*s'मा नयाँ लाइनअद्यावधिक-वैकल्पिक फाइलहरू (%s) मा नयाँरेखा निषेधित गरिएको छ`%.255s' प्याकेज सूचनाहरू छैन`%s' नाम गरेको कुनै पनि प्याकेज स्थापना गरिएको छैन, कन्फिगर गर्न सकिदैनस्थापना नगरिएकोस्थापना नगरिएको तर कन्फिगरेसन बिकी छसंस्करण नम्बरमा विराम पछि केहि पनि छैन प्याकेजको पुरानो संस्करणसँग `%.250s'सँग सुरुआत अति-लामो सूचना फाइल नाम छअवयव`%.255s' (in %.255s)खोल्न अप्रत्यासित रुपले असफलनयाँ सफा गर्ने प्रविष्टिका लागि स्मृति बाहिरधेरै तर्कहरु सँग नयाँ सफा गर्ने प्रविष्टिका लागि स्मृति बाहिरप्याकेज %.250s पहिल्यै स्थापित र कन्फिगर गरिएको छप्याकेज %.250s कन्फिगरका लागि तयार छैन
+कन्फिगर गर्न सकिदैन  (हालको स्थिति `%.250s')प्याकेज बनावट (%s) प्रणाली (%s)संग मेल खादैनप्याकेजले अति धेरै लामो नियन्त्रण सूचना फाइलनाम (सुरू`%.50s') समावेश गर्दछप्याकेज नियन्त्रण सूचनाले`%.250s' डाइरेक्टरी समाहित गर्दछrmdir को `%.250s' प्याकेज नियन्त्रण सूचनाले dir होइन भन्दैनअन्यलाई प्याकेजले %s मा फेर्दछ:
+प्याकेजले नयाँरेखा समावेश नगर्न सक्छप्याकेज नाममा क्यारेक्टरहरू छन् जुन सानो अक्षर अल्फान्युम्स वा -+ होइन ।भाग %d हराइरहेको छभाग फाइल `%.250s' खाली फाइल होइनभाग साइज टाँढा अति ठूलो छ वा सकारात्मक छैनपास गर्यो
+पूर्न-निर्भरता समस्या - अझ %.250s स्थापना गरिदै छैनप्राथमिकता इन्टिजर हुनुपर्दछ%.250s मा त्रुटि पढ्नुहोस्कन्फिगरेसन`%.255s' फाइलमा त्रुटि पढ्नुहोस्मानक आगतमा त्रुटि पढ्नुहोस्कन्फफाइल प्रोम्टको stdin मा त्रुटि पढ्नुहोस्पून एकत्रित गरिएको प्याकेजा फाइलपुन: नामकरणमा `%s' लाई
+  फरक फाइल `%s' अधिलेखन समावेश हुन्छ, स्विकार्य छैनअनुरोध गरिएको सञ्चालनलाई सुपर प्रयोगकर्ता विशेषाधिकार चाहिन्छखोजिएको, तर फेला नपारिएको प्याकेजहरू ( *.deb सँग मिल्ने फाइलहरू)धेरै प्याकेज सूचना प्रविष्टिहरू फेला पर्यो, मात्र एउटालाई अनुमति थियो ।%s मुख्य लिङ्क जस्तै स्लेभ लिङ्कस्रोत फाइल `%.250s' खाली फाइल होइनstatoverride फाइलले रित्तो लाइन समावेश गर्दछअनावृत ट्रेलिङउपप्रक्रियाहरू %s फिर्ता त्रुटि निकास स्थिति %dलक्षक्य डाइरेक्टरी हो - नियन्त्रण फाइल जाँच फड्काउन सकिदैनत्यहाँ %d भागको अलग संस्करणहरू छन् - कम्तिमा `%.250s' र`%.250s'त्यहाँ प्याकेजको नयाँ संस्करणमा स्क्रिप्ट छैन - छोड्दैआगत भाग फाइल `%.250s' पुन: खोल्न अक्षम`%.250s'को अवस्थिति जाँच गर्न अक्षमसङ्ग्रह `%.250s' को उपस्थितिका लागि जाँच गर्न अक्षमसिमलिङ्क `%.255s' का लागि जगेडा स्वामित्व परिवर्तन गर्न अक्षमअन्य संस्करण स्थापना गर्नुभन्दा पहिले `%.255s' वरिपरिको वातावरणहरू हटाउन अक्षम`%.250s'को अद्यावधिक वस्तुस्थिति बन्द गर्न अक्षम`%.255s' सिर्जना गर्न अक्षमनियन्त्रण सूचना फाइल `%.250s' हटाउन अक्षमडिपोट फाइल `%.250s' को प्रयोगलाई मेट्न अक्षम`%.250s' छोड्न अक्षमगद्दासँग %.250s भोर्न अक्षमगद्दा पछि %.250s फ्लस गर्न अक्षम`%.250s' को अद्यावधिक वस्तुस्थिति फ्लस गर्न अक्षमस्रोत फाइल स्थिर गर्न अक्षम`%.250s' को अद्यावधिक गरिएको वस्तुस्थिति fsync गर्न अक्षम`%.250s' को रुपमा `%.250s' स्थापना गर्न अक्षमनयाँ सूचना फाइल स्थापन (मानेको) गर्न अक्षम`%.250s'नयाँ सूचना फाइल `%.250s' को रुपमा `%.250s' स्थापना गर्न अक्षम`%.255s' को नयाँ संस्करण स्थापना गर्न अक्षम`%.250s'को अद्यावधिक वस्तुस्थिति स्थापना गर्न अक्षमनयाँ संस्करण स्थापना गर्न पहिले जगेडा लिङ्क`%.255s' बनाउन अक्षमसिमलिङ्क `%.255s' का लागि जगेडा बनाउन अक्षमनयाँ संस्करण स्थापना गर्न `%.255s' लाई छेउमा सार्न अक्षमनयाँ डिपोट फाइल `%.250s' खोल्न अक्षमनिर्गात फाइल `%.250s' खोल्न अक्षमस्रोत फाइल `%.250s' खोल्न अक्षमअस्थायी नियन्त्रण डाइरेक्टरी खोल्न अक्षमडिपोट डाइरेक्ट्री `%.250s' पढ्न अक्षम%.250s का लागि फाँट स्क्रिप्टर झण्डाहरू पढ्न अक्षमलिङ्क`%.255s' पढ्न अक्षमभाग फाइल `%.250s' पढ्दा त्रुटि%.250s' को नयाँ झिकिएको संस्करण हटाउन अक्षम%.250s' को भर्खरै स्थापित संस्करण हटाउन अक्षमजगेडा प्रतिलिपिको पूनस्थापनालाई अनुमति दिन %.250s'को भर्खरै स्थापित संस्करण हटाउन अक्षमअप्रचलित सूचना फाइल `%.250s हटाउन अक्षमनयाँ डिपोट फाइल `%.250s' मा `%.250s' पुन:नामकरन गर्न अक्षमभाग फाइल `%.250s' पुन:खोल्न अक्षम भयो%.250s' को जगेडा संस्करण पूर्वावस्थामा ल्याउन अक्षमगद्दा पछि %.250s को सुरू खोज्न अक्षम%.250s का लागि बन्द-मा-कार्यान्वयन सेट गर्न अक्षम`%.250s' मा कार्यन्वयन अनुमतिहरू सेट गर्न अक्षम %s `%.250s' लाई stat गर्न अक्षम`%.250s' स्थिर गर्न अक्षमहाल स्थापित कन्फफाइल `%.250s' तोक्न अक्षमअन्य नयाँ फाइल `%.250s' stat गर्न अक्षमअन्य संस्करण स्थापना गर्नु पहिले पूर्वावस्थामा ल्याएको `%.255s' तोक्न अक्षम`%.250s'को अद्यावधिक वस्तुस्थितिका लागि काट्न अक्षम`%.250s' को अद्यावधिक गरिएको वस्तुस्थिति लेख्न अक्षमलाइन %d मा प्याकेज र चयन पछि अप्रत्यासित डेटा%.255s मा %s मा फाइलको अप्रत्यासित समाप्तिलाइन %d को प्याकेज नाम पछि अप्रत्यासित लाइनको समाप्तीलाइन %d को प्याकेजमा अप्रत्यासित लाइनको समाप्तीअज्ञात तर्क `%s'अज्ञात सङ्कुचन प्रकार `%s'!अज्ञात दवाब/अविस्कार विकल्प `%.*sअज्ञात विकल्प -%cअज्ञात विकल्प --%sलाइन %d: %.250s मा अज्ञात वस्तुस्थिति छ खोलिएको तर कन्फिगर नगरिएकोअद्यावचिक डाइरेक्टरीले समाहित `%.250s' फाइल गर्दछ जसको नाम धेरै लामो छ (लम्बाई=%d, उच्चतम=%d)अद्यावधिक डाइरेक्टरीले भिन्न लम्बाई नामहरू (%d र %d दुबै) फाइलहरू समावेश गर्दछ ।प्रयोग कर्ता-परिभाषित फाँट नाम`%.*s' धेरै छोटोसंस्करण स्ट्रिङ् सँग सम्मिलित खाली ठाँउहरू छ ।संस्करण स्ट्रिङ् रित्तो छचेतावनीतपाईँले प्याकेजहरू तिनिहरुकै नामहरू द्धारा निर्दृष्ट गर्नु पर्दछ, भित्र आउने ति फाइलहरुको नाम  उद्धरण गरेर होइन
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/nl.gmo dpkg-1.20.7.1/po/nl.gmo
--- dpkg-1.20.7.1-orig/po/nl.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/nl.gmo	2021-06-09 18:25:15.421504141 -0500
@@ -0,0 +1,1151 @@
+���$$,HH`?I`a�` �`ka�xa�@b&�b=�b&&cMc-ad.�d�d.�d�d e4;epe5�e-�e.�e0f1Pf$�f4�f/�fgq$g(�g$�g�gh:$h6_h1�h1�h!�h2i(Oixi�i!�i�i�i�ij.jIjSUj�j�j�j9�jm+k)�k:�k9�k.8l'gl&�l�l3�l5m6m<mPIm\�mv�m[nnU�n o5oFoSohoZwo�o�o��o�p=�pq*q-;q+iq�q)�q�q#�q/r@rTUr8�r��r=�tR�t1PuD�uL�uAv'Vv&~v(�v'�v+�v4"w!Ww,yw9�w-�wx#,xPx$ox�x �x"�x�x!y#5yYyny�y�y�y"�y2�y1 z/Rz'�z�z.�z�z<{H{-b{R�{H�{Q,|A~|e�|f&}I�}/�}H~7P~<�~7�~�~(B9|��
� ��5	�1?�@q�0���*�.�@�#Y�!}�����Kف7%�5]�-����ۂ!���'3�-[�-�� ��5؃� .�O�"g�!��"��!τ$�,�.C�.r�.��ЅH��69�(p�>��$؆ ���=�D�P��h���#5�:Y�-��Ӊ���*�<.�#k�-��-����������5/��e�[[�������\`����gy�
���( �-I�w�8��<̣.	�8�0O�3��1�������0ϥ1�*2�J]�2���ۦ&��/��2רE
+�VP���5��.��7%�-]�+��/��
�%��/�*K�&v�!��+��B�].���!�����MN���2������� -�dN�'���۽Gs�!��"���4�.T�2��5��3�� �G0�8x�,����(��&�+�=�GY���3��)��$�:-�h�,x�V�� ���8�*T����&��3��-��+-�?Y�,��	������*��)�?� \�H}���������gQ�j���$����4��5��8������uw�&��A�{V�!��,��*!�.L�{������ ��5���� �,1�$^�#��J��.��>!�*`�;��,��#��L�>e�����W��;1�m�uu����"��������9�(F�Xo�3��?��8<�2u�1��,��:�4B�5w�#��4��,�A3�1u�M��-��#�7�#Q�u������� ��1��%%�8K�?��"��B��6*�a�5}�&��.��!	�!+�5M�������������	�9�.K�#z���,����$
+�/�N�%n���%����-��1"�T�j�)��1��:��? �&`���=��7��+�)F�#p��� ��,��+��)�!C�.e�*��7��#���"*�&M�t���0����:���9�@P�+��;��3��-�J�Ae���&��-��#�0?�;p�0��(��?�)F�-p���"��������#�!<�4^�E������,�"8�![�}�$��5�� ��.�8G�����-��5��,�B?�B��B��+�G4�$|� ��:��;��39�=m�����&��/��*�7F�~�D��c��E�2Q�*��"��3��:�-A�(o�&���������"#�F�W]���(������=
+�*H�Js���"�����#�-B� p���)��%����#
�@1�@r�'���������7�S�Y�m�)������!��!#.R%o%�'�,�)H*e'�'��!� 4-U#�#�+�%�$B ^���"�:�7FQ���$�.D\#t��!�"�:P5o �2��%.0N*$�/��6VE"�(��<�.5	)d	(�	*�	+�	
+,*
+)W
+4�
+3�
+2�
+4;R<�6�:7=@u0�;�?#
$c
A�
=�
>$G0l!��b�=c[�:�<=U_�#�H`l��)�)�++<�h$#Hb|��\&o&�'� �7t>2�-�'4<.q)�G�-@	Wak�/�+>@%$�#�&�!7!V"x^�@�&;b~���!�!@^({%��+�7	!A*c(����4OC8�*��)35i�7�5�
+|3
+��m�0I Gz � )� !!M.!|!�!�!3�!$�!5!"%W"}"�""�"4�"#!#C@#C�#=�#%$o,$
�$ �$(�$�$%%77%o%�%I�%.�%6&!P&r&�&G�&P�&G;'.�'?�'#�'7(#N(r(+�(2�(Y�(fK)L�)h�)Mh*&�*K�*3)+=]+�+�+=�+,4*,(_,F�,1�,;-&=-d-�-�-%�-/�-2.8E.-~.-�..�..	/a8/e�/ 0!0 .0DO0?�0�0�0
+1%1.C1r1&�1-�17�12,242:2TX2.�2�2�2�2"3=32P3�3�3)�3�3&�3"4"@4"c4�46�4�4�475B?5H�5&�5"�5(60>6<o6O�6�67:,76g7%�7�7$�74�708L8Oj8
+�8
+�8�8
+�8%�8!9%:9*`9�9
�9�9+�97�9+:!E:Mg:$�:4�:F;@V;%�;5�;6�;1*<A\<�<,�<B�<,(=#U=Ry= �='�=$>	:>ZD>4�>2�>'?/?F?.b?D�?G�?Y@Qx@^�@%)A+OAG{A/�A2�A%&B%LB1rB8�B+�BN	CXC!rC3�C*�C�C5
DCD"^D$�D2�D+�D+E,1E^EyE"�E$�E�E!�E*FBF*^F0�F0�F&�F3G4FG5{G)�G,�GHDH*_H4�H�H�H�H&I#5I#YI%}I(�I.�I>�I9:J9tJ1�J"�J'K*+K.VK�K�K!�K�K(�K("L4KL4�L[�L,M4>M#sM,�M"�M"�M/
+N/:N+jN+�N-�N*�N&O!BOdOO�O9�O �O2P0DP&uPB�P#�P.Q2QPQmQ �Q1�Q�Q�Q!R3)R]R*}R�R�R6�R4S,ES&rS1�S �S'�S.TCT4[T1�T+�T#�TU(U"EUhU�U"�U�U�U�U�V��V�W!�W(�W�W#
+X$.X$SX(xX�X:�X"�X#YSBYM�YE�Y*Z(CZ(lZ*�Z:�Z.�Z0*["[[I~[�[4�[\(\(H\q\"�\�\�\�\�\]]B0]`s]9�]^'%^#M^Aq^`�^�_I�`�a!�a��a�>b�%c)�cC�c%d&>d/ee5�e�e3�e!f'2f<Zf!�f5�f.�f2g0Qg6�g#�g:�g4hMhuhh1�h(i$9i$^iD�i;�i8j7=j&uj;�j7�jk%k)Dk nk&�k�k�k/�klIl\l#ml�lB�l}�lCmmA�m>�mA2nBtn:�n�n:
+o8Eo~o�oS�oc�o�Pp`�pP:q�q�q�q�q�qW�q@rYr�ir_sJys�s�s.�s'"tJt,ht�t,�t7�tuo uT�u��uYfxv�xC7yH{yJ�yAz5Qz4�z6�z5�z7){Da{%�{:�{D|1L|~|$�|!�|'�|}!*}#L} p}$�}&�}�}�}
+~ ~%9~'_~L�~J�~./N~4��5��,6�^c�NW�?i�h��u�P��0قI
+�;T�:��@˃�.%�>T�����҄����82�Ak�Q��=��$=�1b�����0ʆ'��'#�%K�Pq�BF�7L� ��!��ǈ�-�74�;l�)��7҉$
+�%/�U�,s�+��,̊+��,%�6R�6��3��0� %�HF�E��2Ռ=�*F�$q�$����ˍ������(Ўb��1\�������Ð4ڐC�4S�M��K֑�"�ޒ��#��A���X�K��X�g	�{�t��1	�H;���*��1ɬ*��O&�Hv�-����,�31�Ke�����ٮ��?��8��'7�V_�>�����.в?��C?�j��Z�I�@b�<��P�B1�7t�4���0��(&�0O�.��$��+ԶN�gO���8�����V����U��m��$�&���ؾ9��������8��#��!��@�EZ�C��I��E.�t�m��I��)C�*m�-������%��L�
+N�=Y�1��3��:��8�5G�^}�(�� �!&�2H�{���,��?��A�A_�T��9��0�6�S�(n�&��"��0��L�_��f��A�z��������9��F1��x��N��)����%��K���%��K��4��C(�l������ ��6��$�.&�<U�&��%��N��G.�Ev�;��E��:>�8y�a��I��^���@3�t��{��&�
D�
R�`�hq�1��g�=t�I��B��C?�B��=��K�NP�G��&��H�0W�G��I��c�=~�����*��,�H�O�
+V�!a�?��(��B��L/�#|�V��;��03�@d�5��]��,9�%f�U��$���#�A�a�~���U��@�$G� l�E��=��*�"<�'_�=��&��B��#/�=S�H����6��7.�Ff�H��G��->%l]�F�!7'Y���(�)�),B5o5�P�),V&i7���<�96K��U�3
VAB�(� G%m1�;�-�B'Zj;�.N08C�"�6	.V	,�	,�	;�	+
+@G
+H�
+'�
+�
+3;M/�F�1823k5�O� %
F
.b
F�
;�
bjwi�;LH��!�AFMB�P�(A1R?�#�Y�$BXg~�?1O,�*�9�@9T@�3�: S+t�c�0&Wr_�-�Q
m,{���;�!1
S=a&�� �XN[?���!$0!Uw!|�1�0�6&T2{3�*�8
.F8u;��+54(j-�,��(41)f<�4�3L61�9��5
+ @ V s � 2� Q� 2!SP!�!�!�!%"&">"&["�"D�"$�"6#=;#.y#<�#"�#P$)Y$A�$�$%�$#�$9 %:Z%2�%G�%&V'&~~&4�&?2'r'I�'=�'=(5M(5�(9�("�(<)1S)B�)K�)D*?Y*S�*L�*A:+=|+C�+V�+8U,D�,J�,(-RG-S�-I�-28.Ek.&�.�.g�.%]/{�/"�/I"0Nl0S�0�1(�1`�1&%2/L2,|2�2@�2@�2C@3C�3��30�4�4!�4
5�$5z�5>@6<6,�6'�6Q7�c748@68(w86�8/�8;9fC91�9�9�9+:�.:C�:�:	;G;"d;#�;"�;'�;"�;%<!?<)a<h�<J�<%?=#e=$�="�=�=(�=3>1?>2q>2�>0�>*?&3?Z?-j?<�?*�?3@;4@p@�@�@�@�@�@RAH^A7�A�A�ABBQ*B|B'�BN�BKC]CrC��C
+ED.PD�D91EWkE(�E(�E%FR;F�F&�F�FH�F/8GHhG*�G�G�G!HL4H/�H(�HZ�HV5ID�I8�I�
+J�J7�J@�J* K4KKB�K�K�KP�K0JL8{L"�L�L)�LGMhaMM�M=NIVN1�NE�N.O'GO0oO7�Oc�O|<PS�P|
QW�Q+�QOR:^RE�R�R"�RA"SdS>wS'�S[�S1:TLlT6�T �T*U%<U<bU<�U5�UQVEdVF�V@�VA2W�tW~�W$}X
+�X"�XH�XzY,�Y�Y-�Y-Z51ZgZ+yZ;�ZL�Z#.[	R[\[!d[X�[9�[
+\!$\%F\,l\�\1�\�\�\(	]2]:N]:�]:�]0�]"0^7S^�^�^Q�^^_Us_+�_.�_3$`DX`=�`k�`GaaaI~a\�a)%b
+Ob)ZbM�b*�b2�bh0c�c�c4�c	�c+�c'#d.KdEzd�d�d�d(�dFe<de-�eU�e5%fA[fF�fI�f).g<Xg=�gT�gL(h uh*�hJ�h=i?Jii�i#�i$j =j
+^jaij7�j?k-Ckqk �k@�kJ�kN<l_�lZ�leFm'�m;�mcn&tn8�n-�n8o9;oJuoC�oSpXp'vp@�p0�pq;+qgq(�q*�q+�q2r-9r5gr�r"�r#�r(�r!'s+Is2us1�s5�s3t9Dt*~tA�t<�tD(u2mu2�u�uV�u-CvBqv�v�v�v+w'/w$Ww&|w*�w9�wKx>TxH�xE�x*"y My;ny=�y!�y#
+z#.zRz1lz0�z:�z?
+{oJ{3�{@�{,/|8\|$�|3�|9�|4(}/]}5�}#�}8�}T ~(u~+�~/�~%�~L (mZ�T�BF�b��1�F� e�(��$��.ԁ4�8�&Q�,x�G��2�3 �&T�{�6��2̓+�(,�2U�&��$��6Ԅ�/"�/R�6��&������#�9�%W�#}�����ʆ�߆�· ň(�,�"<�+_�,��,��0�*�@A�����X\�Zx�Ӌ7�E'�Cm�I��@��8<�%u�T����D��$<�(a�'����0ˎ'��$�">�"a�����Y��w�E��ƐC�(%�KN�j���cj$[�rD�v�sJ�\�#���b�|%@��2-?I�A.���bs����^J;�����T�^^�2�!:�<�|Y���gZ��#`������G�d6z��7��%u�%_��,S�T� ���.��-���3*`�tJCcR�P@,ZBKn
+:������X���k���I����Ye���&�A�%�<����~����	Un���l�B�-m4m;�vlQ1SXw���V]��G�6M�C�N]��[xA�+Cp��>�3���Kq��i\����!���.�����i�a��� �'x(�Ju�����6S�'����y'2���:��0�/Dj"�����ft�s��d��_$~q������"=�Kx��#f\��c�����&���|1^�F��_G�F�Z5������w��)&Ml�p5�y��(���RcY�����@��� �%����������+��t38��)�>j9���(�}*a]
�k��h�d{������\�@�n�Q�|3����
!$N&��eBU�l������Om,p�OP��C�.�$`�G>��l�B7�4��F�uG��W�k�n�#��w�2�L�
�4�A�Z��)��v��.����=]��g,{>M�F4Tq��D��V����r�rk�$��xg���9aV�+����	�8��y��/��:�0�J�b��c�WH��E�`�IUC�p
+
+��o^���h�>#o�tE�5gOq=�_}u:�I6o��faM���}L<��U0�SV7q@�U_LW!N�0Zh�����"EY,��)�{�X�P*�Mv� ������R��85~�?DT�1i�`�W�
+�}�/��0�H�B�u{L����S�����
E4��z(�����[?v�?�V��"X�9/iF��Q����7��sfj�a� �/�H���bh��W���H(�"�;���d���KR�er13��9���}m���o|6��y�t'+!��P���rX��E��9;�k
�
+���;T�5&��7�~LN+e=2��n��-��<��f�1��Nzy�H*wD�d�Og�*������Re?��]�[{oYA�	��i�[�j��	�mO�)h8�wP8-\�xz���=�	bzKs�'�Q�Q�����<p��~��I�
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Currently enabled options:
+ %s
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on  new Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd bytes.
+ old Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd, main archive=%jd.
+%d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not a regular file%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s subprocess failed with wait status code %d%s subprocess returned error exit status %d%s subprocess was interrupted%s subprocess was killed by signal (%s)%s%s suggests %s%s was locked by another process
+%s%s was locked by another process with pid %d
+%s%s%s%s: %s%s:%s
+ %s
+%s%s/%s has been changed (manually or by a script); switching to manual updates only%s%s/%s is dangling; it will be updated with best choice%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: %s%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%.255s' is not a Debian format archive'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field present for package with inappropriate '%s' field'%s' field value '%.250s''%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version '%s''%s' field, reference to '%.255s': version contains '%c' instead of '%c''%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' is not a valid architecture name in '%s' field: %s'%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <link> <name> <path>--%s needs <link> <name> <path> <priority>--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s only allowed with --%s--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one <archname> argument--%s takes one <pkgname> argument--%s takes one <trigname> argument--%s takes one <version> argument--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAssertable features: support-predepends, working-epoch, long-filenames,
+  multi-conrep, multi-arch, versioned-provides, protected-field.
+
+Authenticating %s ...
+Authentication is required to run update-alternativesCommands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -b|--build <directory> [<deb>]   Build an archive.
+  -c|--contents <deb>              List contents.
+  -I|--info <deb> [<cfile>...]     Show info to stdout.
+  -W|--show <deb>                  Show information on package(s)
+  -f|--field <deb> [<cfield>...]   Show field(s) to stdout.
+  -e|--control <deb> [<directory>] Extract control info.
+  -x|--extract <deb> <directory>   Extract files.
+  -X|--vextract <deb> <directory>  Extract & list files.
+  -R|--raw-extract <deb> <directory>
+                                   Extract control info and files.
+  --ctrl-tarfile <deb>             Output control tarfile.
+  --fsys-tarfile <deb>             Output filesystem tarfile.
+
+Commands:
+  -i|--install       <.deb file name>... | -R|--recursive <directory>...
+  --unpack           <.deb file name>... | -R|--recursive <directory>...
+  -A|--record-avail  <.deb file name>... | -R|--recursive <directory>...
+  --configure        <package>... | -a|--pending
+  --triggers-only    <package>... | -a|--pending
+  -r|--remove        <package>... | -a|--pending
+  -P|--purge         <package>... | -a|--pending
+  -V|--verify [<package>...]       Verify the integrity of package(s).
+  --get-selections [<pattern>...]  Get list of selections to stdout.
+  --set-selections                 Set package selections from stdin.
+  --clear-selections               Deselect every non-essential package.
+  --update-avail [<Packages-file>] Replace available packages info.
+  --merge-avail [<Packages-file>]  Merge with info from file.
+  --clear-avail                    Erase existing available info.
+  --forget-old-unavail             Forget uninstalled unavailable pkgs.
+  -s|--status [<package>...]       Display package status details.
+  -p|--print-avail [<package>...]  Display available version details.
+  -L|--listfiles <package>...      List files 'owned' by package(s).
+  -l|--list [<pattern>...]         List packages concisely.
+  -S|--search <pattern>...         Find package(s) owning file(s).
+  -C|--audit [<package>...]        Check for broken package(s).
+  --yet-to-unpack                  Print packages selected for installation.
+  --predep-package                 Print pre-dependencies to unpack.
+  --add-architecture <arch>        Add <arch> to the list of architectures.
+  --remove-architecture <arch>     Remove <arch> from the list of architectures.
+  --print-architecture             Print dpkg architecture.
+  --print-foreign-architectures    Print allowed foreign architectures.
+  --assert-<feature>               Assert support for the specified feature.
+  --validate-<thing> <string>      Validate a <thing>'s <string>.
+  --compare-versions <a> <op> <b>  Compare version numbers - see below.
+  --force-help                     Show help on forcing.
+  -Dh|--debug=help                 Show help on debugging.
+
+Commands:
+  -s, --status [<package>...]      Display package status details.
+  -p, --print-avail [<package>...] Display available version details.
+  -L, --listfiles <package>...     List files 'owned' by package(s).
+  -l, --list [<pattern>...]        List packages concisely.
+  -W, --show [<pattern>...]        Show information on package(s).
+  -S, --search <pattern>...        Find package(s) owning file(s).
+      --control-list <package>     Print the package control file list.
+      --control-show <package> <file>
+                                   Show the package control file.
+  -c, --control-path <package> [<file>]
+                                   Print path for package control file.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not chroot into maintainer script environmentDo not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnore a missing stat override when removing itIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstall or remove incidental packages even when on holdInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: removing the lock file is always wrong, and can end up damaging the
+locked area and the entire system. See <https://wiki.debian.org/Teams/Dpkg/FAQ>.Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir <directory>   set the directory with the statoverride file.
+  --instdir <directory>    set the root directory, but not the admin dir.
+  --root <directory>       set the directory of the root filesystem.
+  --update                 immediately update <path> permissions.
+  --force                  deprecated alias for --force-all.
+  --force-<thing>[,...]    override problems (see --force-help).
+  --no-force-<thing>[,...] stop when problems encountered.
+  --refuse-<thing>[,...]   ditto.
+  --quiet                  quiet operation, minimal output.
+  --help                   show this help message.
+  --version                show the version.
+
+Options:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --load-avail                     Use available file on --show and --list.
+  --no-pager                       Disables the use of any pager.
+  -f|--showformat=<format>         Use alternative format for --show.
+
+Options:
+  --admindir=<directory>     Use <directory> instead of %s.
+  --root=<directory>         Install on a different root directory.
+  --instdir=<directory>      Change installation dir without changing admin dir.
+  --pre-invoke=<command>     Set a pre-invoke hook.
+  --post-invoke=<command>    Set a post-invoke hook.
+  --path-exclude=<pattern>   Do not install paths which match a shell pattern.
+  --path-include=<pattern>   Re-include a pattern after a previous exclusion.
+  -O|--selected-only         Skip packages not selected for install/upgrade.
+  -E|--skip-same-version     Skip packages whose same version is installed.
+  -G|--refuse-downgrade      Skip packages with earlier version than installed.
+  -B|--auto-deconfigure      Install even if it would break some other package.
+  --[no-]triggers            Skip or force consequential trigger processing.
+  --verify-format=<format>   Verify output format (supported: 'rpm').
+  --no-pager                 Disables the use of any pager.
+  --no-debsig                Do not try to verify package signatures.
+  --no-act|--dry-run|--simulate
+                             Just say what we would do - don't do it.
+  -D|--debug=<octal>         Enable debugging (see -Dhelp or --debug=help).
+  --status-fd <n>            Send status change updates to file descriptor <n>.
+  --status-logger=<command>  Send status change updates to <command>'s stdin.
+  --log=<filename>           Log status changes and actions to <filename>.
+  --ignore-depends=<package>[,...]
+                             Ignore dependencies involving <package>.
+  --force-<thing>[,...]      Override problems (see --force-help).
+  --no-force-<thing>[,...]   Stop when problems encountered.
+  --refuse-<thing>[,...]     Ditto.
+  --abort-after <n>          Abort after encountering <n> errors.
+  --robot                    Use machine-readable output on some commands.
+
+Options:
+  --altdir <directory>     change the alternatives directory.
+  --admindir <directory>   change the administrative directory.
+  --instdir <directory>    change the installation directory.
+  --root <directory>       change the filesystem root directory.
+  --log <file>             change the log file.
+  --force                  allow replacing files with alternative links.
+  --skip-auto              skip prompt for alternatives correctly configured
+                           in automatic mode (relevant for --config only)
+  --quiet                  quiet operation, minimal output.
+  --verbose                verbose operation, more output.
+  --debug                  debug output, way more output.
+  --help                   show this help message.
+  --version                show the version.
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Options:
+  --package <package>      name of the package whose copy of <file> will not
+                             be diverted.
+  --local                  all packages' versions are diverted.
+  --divert <divert-to>     the name used by other packages' versions.
+  --rename                 actually move the file aside (or back).
+  --no-rename              do not move the file aside (or back) (default).
+  --admindir <directory>   set the directory with the diversions file.
+  --instdir <directory>    set the root directory, but not the admin dir.
+  --root <directory>       set the directory of the root filesystem.
+  --test                   don't do anything, just demonstrate.
+  --quiet                  quiet operation, minimal output.
+  --help                   show this help message.
+  --version                show the version.
+
+Options:
+  -v, --verbose                    Enable verbose output.
+  -D, --debug                      Enable debugging output.
+      --showformat=<format>        Use alternative format for --show.
+      --deb-format=<format>        Select archive format.
+                                     Allowed values: 0.939000, 2.0 (default).
+      --nocheck                    Suppress control file check (build bad
+                                     packages).
+      --root-owner-group           Forces the owner and groups to root.
+      --[no-]uniform-compression   Use the compression params on all members.
+  -z#                              Set the compression level when building.
+  -Z<type>                         Set the compression type used when building.
+                                     Allowed types: gzip, xz, none.
+  -S<strategy>                     Set the compression strategy when building.
+                                     Allowed values: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite an existing stat override when adding itOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Protected fieldPurging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove a protected packageRemove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Run update-alternatives to modify system alternative selectionsSelecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Usage: %s [<option>...] <command>
+
+Usage: %s [<option>...] <trigger-name>
+       %s [<option>...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use MAC based security if availableUse dpkg --contents (= dpkg-deb --contents) to list archive files contents.
+Use dpkg --info (= dpkg-deb --info) to examine archive files.
+Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenUseful environment variables:
+Validatable things: pkgname, archname, trigname, version.
+
+VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path %s%s doesn't existalternative path is not absolute as it should be: %salternatives ('|') not allowed in '%s' fieldambiguous package name '%s' with more than one installed instancean error occurred with no error handling in placean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchitecture name '%s' is invalid: %sarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' is not a regular filearchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive details '%s' field not allowed in status filearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'boolean (yes/no) '%s' field: %sbroken due to failed removal or installationbroken due to postinst failurebuilding an unknown package in '%s'.building package '%s' in '%s'.can't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot access archive '%s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot create administrative directory '%s'cannot create alternatives directory '%s'cannot create base directory for %scannot create directory %scannot create log directory '%s'cannot create the dpkg database directory %scannot create the dpkg updates directory %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get package %s filesystem last modification timecannot get security labeling handlecannot open %scannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open directory '%s'cannot open file %scannot open security status notification channelcannot read %scannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set primary group ID to rootcannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat %scannot stat '%.255s' (in '%.255s')cannot stat file '%s%s'cannot stat file '%s'cannot stat pathname '%s'cannot write file %s into the pagercannot write to log file '%s': %scannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile file contains an empty lineconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is not an absolute pathnameconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering deconfiguration of protected
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file '%s' for package '%s' is missing valuecontrol file '%s' for package '%s' is missing value separatorcontrol file contains %ccontrol membercorrupt info database format file '%s'corrupted filesystem tarfile in package archivecould not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdeprecated --%s option; use --%s insteaddiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+diverting file '%s' from an Essential package with rename is dangerous, use --no-renamedone
+downgrading %.250s from %.250s to %.250sdpkg database lockdpkg frontend lockdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty archive details '%s' fieldempty field nameempty string from fgets reading conffilesempty trigger names are not permittedempty value for '%s' fieldend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is emptyepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while cleaning uperror while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not a Debian binary archive (try dpkg-split?)file '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedfirst (want) word in '%s' field: %sforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentformat version with too big major componentformat version with too big minor componentfound unknown packages; this might mean the available database
+is outdated, and needs to be updated through a frontend method;
+please see the FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>generated corrupt ar header for '%s'group '%s' does not existhas invalid value '%.50s'has trailing junkheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalled %s package %s scriptinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal errorinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid package name in '%s' field: %sinvalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid tar header checksuminvalid tar header checksum fieldinvalid tar header gid fieldinvalid tar header mtime fieldinvalid tar header size fieldinvalid tar header uid fieldinvalid tar header with empty name fieldinvalid trigger name '%.250s': %.250sis missing a valueline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slaveloading control file '%s' for package '%s'loading files list file for package '%s'local diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing '%s' fieldmissing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s or --%sneed an action optionnew %s package %s scriptnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no 'control' file in control archive!no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, %s is protected, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot enough privileges to change root directory with --force-not-root, consider using --force-script-chrootless?not installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '%s' field usedobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete compression type '%s'; use xz insteadobsolete compression type '%s'; use xz or gzip insteadobsolete force/refuse option '%s'obsolete option '--%s'old %s package %s scriptold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoutside error context, abortingoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s (%s) with field '%s: %s' is not co-installable with %s which has multiple installed instancespackage %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package architecture is missing or emptypackage contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has '%s' field but is architecture '%s'package has '%s' field but is missing architecturepackage has status %s and has conffiles, forgetting thempackage has status %s but no triggers awaitedpackage has status %s but no triggers pendingpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name '%s' is invalid: %spackage name has characters that aren't lowercase alphanums or '-+.'package not in status nor available database at line %d: %.250spackage signature verificationpackage version numberpager to show fileparsing file '%.255s' near line %d:
+ parsing file '%s' near line %d package '%s':
+ part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)partially read tar headerpassed
+pastepath may not contain newlinesplease specify --no-rename explicitly, the default will change to --rename in 1.20.xpre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %squadstate (foreign/allowed/same/no) '%s' field: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'renaming %s link from %s%s to %s%srenaming %s slave link from %s%s to %s%srequested operation requires superuser privilegerequired read/write access to the dpkg database directory %srequired write access to dpkg database directory '%s' for bulk available updaterevision number is emptyrm command for cleanuproot or empty directory listed as a conffile in '%s' fieldsearched, but found no packages (files matching *.deb)second (error) word in '%s' field: %ssection<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesshowing package list on pagerskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filesyntax error in triggers deferred file '%.250s' at line %d character %zd '%s'takes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthird (status) word in '%s' field: %sthis is a protected package; it should not be removedthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too few values in archive details '%s' field (compared to others)too many errors, stoppingtoo many nested errors during error recoverytoo many values in archive details '%s' field (compared to others)too-long line or missing newline in '%.250s'treewalk root %s is not a directorytrigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name '%s' is invalid: %strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers database locktriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to access dpkg database directory '%s' for bulk available updateunable to access the dpkg database directory %sunable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to check lock file for dpkg database directory %sunable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create dpkg database lock file for directory %sunable to open/create dpkg frontend lock for directory %sunable to open/create new triggers deferred file '%.250s'unable to open/create triggers lock file '%.250s'unable to parse timestamp '%.255s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read link '%s%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat '%.255s' (which was about to be installed)unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunexpected pre-existing pathname %sunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown system group '%s' in statoverride file; the system group got removed
+before the override, which is most probably a packaging bug, to recover you
+can remove the override manually with %sunknown system user '%s' in statoverride file; the system user got removed
+before the override, which is most probably a packaging bug, to recover you
+can remove the override manually with %sunknown tar header type '%c'unknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunrecoverable fatal error, abortingunsupported GNU tar header type '%c'unsupported PAX tar header type '%c'unsupported Solaris tar header type '%c'unsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has line starting with non-space '%c'value for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion '%s' has bad syntax: %sversion number does not start with digitversion number is emptyversion string has embedded spacesversion string is emptyversioned Provideswait for %s subprocess failedwait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingword in '%s' field: %syes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou do not have permission to lock the dpkg database directory %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.19.5
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2020-07-21 22:53+0200
+Last-Translator: Frans Spiesschaert <Frans.Spiesschaert@yucom.be>
+Language-Team: Debian Dutch l10n Team <debian-l10n-dutch@lists.debian.org>
+Language: nl
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+X-Generator: Poedit 2.2.1
+
+in de wacht staande pakkettriggers die onoplosbaar zijn of kunnen zijn:
+
+Configuratiebestand '%s' bestaat niet op het systeem.
+Zoals door u gevraagd, wordt het nieuwe configuratiebestand geïnstalleerd.
+
+Momenteel mogelijke opties:
+ %s
+
+Debugopties kunnen gecombineerd worden m.b.v. bitwise-or.
+Noteer dat hun betekenis en waarde voorwerp van wijzigingen kunnen zijn.
+
+Gebruik 'dpkg' om pakketten te installeren en te verwijderen van uw
+systeem, of gebruik 'apt' of 'aptitude' voor gebruikersvriendelijk
+pakketbeheer. Via 'dpkg-deb --extract' uitgepakte pakketten worden
+niet juist geïnstalleerd!
+
+OPGELET - opties aangeduid met [!] kunnen uw installatie ernstig beschadigen.
+Forceeropties aangeduid met [*] staan standaard aan.
+    Niet gewijzigd sinds de installatie.
+    Versie in pakket is gelijk aan die van de laatste installatie.
+     geen gewoon bestand      %.255s
+   Wat wilt u er aan doen ?  De volgende keuzes zijn mogelijk:
+    Y of I  : de versie van de pakketbeheerder installeren
+    N of O  : de huidige geïnstalleerde versie behouden
+      D     : de verschillen tussen de versies tonen
+      Z     : een shell starten om de situatie te onderzoeken
+  %.250s (versie %.250s) is aanwezig en is %s.
+  %.250s (versie %.250s) moet geïnstalleerd worden.
+  %.250s is %s.
+  %.250s is geïnstalleerd, maar is versie %.250s.
+  %.250s is niet geïnstalleerd.
+  %.250s moet gedeconfigureerd worden.
+  %.250s moet geïnstalleerd worden, maar is versie %.250s.
+  %.250s moet verwijderd worden.
+  %.250s is uitgepakt, maar is nooit geconfigureerd.
+  %.250s is uitgepakt, maar is versie %.250s.
+  %.250s laatst geconfigureerde versie is %.250s.
+  %.250s levert %.250s en is aanwezig en is %s.
+  %.250s levert %.250s en moet geïnstalleerd worden.
+  %.250s levert %.250s maar is %s.
+  %.250s levert %.250s maar moet gedeconfigureerd worden.
+  %.250s levert %.250s maar moet verwijderd worden.
+  %s (%s) voorziet in %s.
+  -?, --help                       Deze hulptekst tonen.
+      --version                    Het versienummer tonen.
+
+  Pakket %s wacht op de verwerking van triggers.
+  Pakket %s is nog niet geconfigureerd.
+  Pakket %s is niet geïnstalleerd.
+  Pakket %s moet verwijderd worden.
+  Pakket %s dat voorziet in %s wacht op de verwerking van triggers.
+  Pakket %s dat voorziet in %s is nog niet geconfigureerd.
+  Pakket %s dat voorziet in %s, is niet geïnstalleerd.
+  Pakket %s dat voorziet in %s moet verwijderd worden.
+  Versie van %s op dit systeem is %s.
+  Versie van %s op dit systeem, waarin %s voorziet, is %s.
+  Versie van %s die geconfigureerd moet worden, is %s.
+  koppeling %s is %s  koppeling beste versie is %s  koppeling beste versie niet beschikbaar  koppeling is momenteel afwezig  koppeling verwijst momenteel naar %s  slaaf %s is %s  slaaf %s: %s %7jd bytes, %5d regels   %c  %-20.127s %.127s
+ %d in %s:  %d pakket uit de volgende sectie: %d pakketten uit de volgende secties: %s (%jd bytes)
+ %s (%s) maakt %s defect en is %s.
+ %s (geen gewoon bestand)
+ ==> Verwijderd (door u of door een script) sinds de installatie.
+ ==> Bestand op het systeem is door u of door een script gemaakt.
+ ==> Bestand zit ook in het pakket van de pakketbeheerder.
+ ==> Huidige oude configuratiebestand wordt als standaard bewaard.
+ ==> Gewijzigd (door u of door een script) sinds de installatie.
+ ==> Pakketdistributeur heeft een bijgewerkte versie gemaakt.
+ ==> Huidige oude bestand wordt gebruikt, zoals door u gevraagd.
+ ==> Het nieuwe configuratiebestand wordt als standaard gebruikt.
+ ==> Nieuw bestand wordt gebruikt, zoals door u gevraagd.
+ Pakket %s: de(e)l(en)  De standaardactie is om de nieuwe versie te installeren.
+ De standaardactie is om uw huidige versie te behouden.
+ en  is afhankelijk van  nieuw Debian-pakket, versie %d.%d.
+ grootte %jd bytes: controlearchief=%jd bytes.
+ verouderd Debian-pakket, versie %d.%d.
+ grootte %jd bytes: controlearchief=%jd, hoofdarchief=%jd.
+%d verwacht programma niet gevonden in PATH of niet uitvoerbaar
+%s%d verwachte programma's niet gevonden in PATH of niet uitvoerbaar
+%s%d bestand of map momenteel geïnstalleerd.)
+%d bestanden en mappen momenteel geïnstalleerd.)
+%d gevraagd controle-element ontbreekt%d gevraagde controle-elementen ontbreken%s (subproces): %s
+%s - prioriteit %d%s breekt %s%s is in strijd met %s%s beschadigd: %s%s debugoptie, --debug=<octaal> of -D<octaal>:
+
+ Nummer  Ref. in bron     Beschrijving
+%s heeft als vereiste %s%s verbetert %s%s forceeropties - gedrag sturen als problemen gevonden werden:
+  waarschuwen maar verder gaan:
+              --force-<ding>,<ding>,...
+  stoppen met foutmelding:
+             --refuse-<ding>,<ding>,... | --no-force-<ding>,...
+ Dingen forceren:
+%s is geen gewoon bestand%s is niet goed geïnstalleerd; elke afhankelijkheid ervan wordt genegeerd%s heeft als voorvereiste %s%s beveelt %s aansubproces %s is mislukt met wachtstatuscode %dsubproces %s gaf de foutwaarde %d terugsubproces %s werd onderbrokensubproces %s werd gedood door signaal (%s)%s%s suggereert %s%s werd vergrendeld door een ander proces
+%s%s werd vergrendeld door een ander proces met pid %d
+%s%s%s%s: %s%s:%s
+ %s
+%s%s/%s is veranderd (handmatig of door een script). Er wordt omgeschakeld naar louter handmatige bijwerkingen.%s%s/%s is een doelloze koppeling; ze wordt bijgewerkt met de best beschikbare keuze%s:
+    Indelingsversie v.h. deel:                     %d.%d
+    Deel van pakket:                               %s
+        ... versie:                                %s
+        ... architectuur:                          %s
+        ... MD5-controlesom:                       %s
+        ... lengte:                                %jd bytes
+        ... opgesplitst elke:                      %jd bytes
+    Nummer v.h. deel:                              %d/%d
+    Lengte v.h. deel:                              %jd bytes
+    Plaats v.h. deel:                              %jd bytes
+    Bestandsgrootte v.h. deel (gebruikte portie):  %jd bytes
+
+%s: configuratiebestand '%.250s' is geen gewoon bestand of symbolische koppeling (= '%s')%s: configuratiebestand '%.250s' verwijst naar een vergane bestandsnaam
+ ('%s' is een symbolische koppeling naar '%s')%s: configuratiebestand '%s' is een circulaire verwijzing
+ (= '%s')%s: vereistenproblemen, maar wordt toch geconfigureerd zoals u vroeg:
+%s%s: vereistenproblemen, maar op verzoek worden triggers toch behandeld:
+%s%s: vereistenproblemen, maar wordt op verzoek toch verwijderd:
+%s%s: fout bij het koppelen van invoer aan bzip2-stroom%s: fout bij het koppelen van invoer aan gzip-stroom%s: fout bij het koppelen van uitvoer aan bzip2-stroom%s: fout bij het koppelen van uitvoer aan gzip-stroom%s: kon '%.250s' niet naar '%.250s' laten verwijzen: %s%s: kon '%.250s' niet verwijderen (voor het overschrijven ervan): %s%s: kon '%.250s' niet verwijderen: %s%s: kon de oude reservekopie '%.250s' niet verwijderen: %s%s: kon de oude gedistribueerde versie '%.250s' niet verwijderen: %s%s: kon '%.250s' niet hernoemen naar '%.250s': %s%s: interne leesfout van bzip2%s: interne leesfout van bzip2: '%s'%s: interne schrijffout van bzip2%s: interne schrijffout van bzip2: '%s'%s: interne leesfout van gzip%s: interne leesfout van gzip: %s%s: interne leesfout van gzip: '%s'%s: interne schrijffout van gzip%s: interne schrijffout van gzip: %s%s: interne schrijffout van gzip: '%s'%s: sluitfout van lzma%s: fout van lzma: %s%s: leesfout van lzma%s: schrijffout van lzma%s: kopieerfout bij het doorgeven: %s%s: kan %s niet openen voor frommel: %s%s: kan de verwijzing naar configuratiebestand '%s' niet lezen
+ (= '%s'): %s%s: kan de status van configuratiebestand '%s' niet opvragen
+ (= '%s'): %s'%.255s' bevat geen controleonderdeel '%.255s''%.255s' is geen archief volgens Debian-formaat'%s' botst met '%s''%s' bevat zelf gedefinieerde 'Priority'-waarde '%s''%s' verwacht geen waardeveld '%s' aanwezig voor pakket met ongepast veld '%s'waarde '%.250s' voor veld '%s'veld '%s', ongeldige pakketnaam '%.255s': %sveld '%s', ontbrekende architectuurbenaming, of rommel waar een architectuurnaam werd verwachtveld '%s', ontbrekende pakketnaam, of rommel waar een pakketnaam werd verwachtveld '%s', verwijzing naar '%.255s':
+ '%c' is verouderd, gebruik liever '%c=' of '%c%c'veld '%s', verwijzing naar '%.255s':
+ foute versie-relatie %c%cveld '%s', verwijzing naar '%.255s':
+ impliciete exacte overeenkomst in versienummer, gebruik liever '='veld '%s', verwijzing naar '%.255s':
+ versiewaarde begint met een niet-alfanumeriek teken, voeg liever een spatie toeveld '%s', verwijzing naar '%.255s': ongeldige architectuurbenaming '%.255s': %sveld '%s', verwijzing naar '%.255s': versie '%s'veld '%s', verwijzing naar '%.255s': versie bevat '%c' in plaats van '%c'veld '%s', verwijzing naar '%.255s': versie niet afgeslotenveld '%s', syntaxisfout na verwijzing naar pakket '%.255s''%s' is geen geldige naam voor een architectuur in veld '%s': %s'%s' verwacht een waarde'%s' niet gevonden in PATH of niet uitvoerbaar(Verdwijning van %s is opgemerkt; het werd totaal vervangen.)
+(Database wordt ingelezen ... (geen beschrijving beschikbaar)(totaal %jd bytes)
+, core gedumptoptie -%c verwacht geen waardeoptie -%c verwacht een waarde--%s --pending accepteert geen niet-optionele argumenten--%s --recursive heeft op zijn minst één pad als argument nodig--%s ondersteunt (nog) niet het lezen van het .deb-bestand vanuit standaardinvoer--%s verwacht een .deb-bestandsnaam en een map als argumenten--%s heeft <link> <naam> <pad> nodig--%s heeft <link> <naam> <pad> <prioriteit> nodig--%s heeft <naam> nodig--%s heeft <naam> <pad> nodig--%s verwacht een .deb-bestandsnaam als argument--%s heeft een <map> als argument nodig--%s heeft als argument <bestand> nodig--%s heeft één enkel argument nodig--%s heeft een doelmap nodig.
+Zou u misschien 'dpkg --install' moeten gebruiken?--%s vereist een geldige pakketnaam, maar '%.250s' is dat niet: %s--%s heeft op zijn minst één pakketarchiefbestand als argument nodig--%s heeft ten minste een pakketnaam als argument nodig--%s heeft vier argumenten nodig--%s is enkel toegelaten met --%soptie --%s verwacht geen waardeoptie --%s verwacht een waarde--%s vereist een positief octaal als argument--%s vereist een of meerdere deelbestanden als argument--%s verwacht hoogstens één Packages-bestand als argument--%s verwacht ten hoogste twee argumenten--%s verwacht ten hoogste twee argumenten (.deb en map)--%s verwacht precies één argument--%s verwacht precies twee argumenten--%s verwacht geen argumenten--%s aanvaardt één <archname> als argument--%s aanvaardt één <pkgname> als argument--%s aanvaardt één <trigname> als argument--%s aanvaardt één <version> als argument--%s heeft een pakketnaam als argument nodig--%s verwacht slechts een argument (.deb-bestandsnaam)--%s werd gebruikt met verouderde relatieoperator '%s'--auto vereist precies een deelbestand als argument--auto vereist het gebruik van de optie --output--compare-versions foute relatie--compare-versions gebruikt drie argumenten: <versie> <relatie> <versie>--search heeft ten minste een bestandsnaam-patroon als argument nodig--split verwacht een bronbestandsnaam als argument--split verwacht hoogstens een bronbestandsnaam en doelprefix--update is opgegeven maar %s bestaat niet--update is waardeloos voor --remove... het lijkt erop dat dit goed ging.../%s; maar:
+<compress> van tar -cf<deb>   is de bestandsnaam van een archief in debian-formaat.
+<cbestand> is de naam van een administratief bestandscomponent.
+<cveld> is de naam van een veld in het belangrijkste 'control'-bestand.
+
+<decompressie><dpkg-deb --info pipe><link> en <pad> mogen niet identiek zijn<link> is de symbolische koppeling die verwijst naar %s/<naam>.
+  (bv. /usr/bin/pager).
+<naam> is de hoofdnaam voor deze groep van koppelingen
+  (bv. pager).
+<pad> is de plaats van een van de alternatieve doelbestanden
+  (bv. /usr/bin/less).
+<prioriteit> is een geheel getal; opties met hogere getallen hebben
+  hogere prioriteit in automatische modus.
+
+<bestandsindicator van pakketstatus en voortgang><standaardfout><standaardinvoer><standaarduitvoer>'%s' wordt toegevoegd
+De installatie van conflicterende pakketten toelatenAlternatief %s is niet gewijzigd want keuze %s is niet beschikbaar.Steeds ontbrekende configuratiebestanden installerenSteeds de nieuwe configuratiebestanden gebruiken; er geen vragen over stellenSteeds de oude configuratiebestanden gebruiken; er geen vragen over stellenEen ander proces heeft de database voor schrijven vergrendeld en is ze
+momenteel misschien aan het wijzigen. Enkele van de volgende problemen
+kunnen gewoon daaraan toe te schrijven zijn.
+ArchitectuurIn beweringen bruikbare functionaliteit: support-predepends, working-epoch, long-filenames,
+  multi-conrep, multi-arch, versioned-provides, protected-field.
+
+Bezig met authenticeren van %s ...
+Authenticatie is nodig voor het uitvoeren van update-alternativesCommando's:
+  --add <eigenaar> <groep> <modus> <pad>
+                           nieuwe <pad>-regel toevoegen in de database.
+  --remove <pad>           <pad> uit de database verwijderen.
+  --list [<glob-patroon>]  huidige 'overrides' in de database tonen.
+
+Commando's:
+  --check-supported       Nagaan of het actieve dpkg triggers ondersteunt.
+
+Commando's:
+  --install <link> <naam> <pad> <prioriteit>
+    [--slave <link> <naam> <pad>] ...
+                        een groep van alternatieven toevoegen aan het systeem.
+  --remove <naam> <pad> <pad> uit de alternatievengroep <naam> verwijderen.
+  --remove-all <naam>   groep <naam> uit het alternatievensysteem verwijderen.
+  --auto <naam>         de hoofdlink <naam> omzetten naar automatische modus.
+  --display <naam>      informatie tonen over de groep <naam>.
+  --query <naam>        machineleesbare versie van --display <naam>.
+  --list <naam>         alle doelen in de groep <naam> tonen.
+  --get-selections      hoofdnamen van alternatieven en hun status tonen.
+  --set-selections      status van alternatieven van standaard-input lezen.
+  --config <naam>       alle alternatieven voor de groep <naam> tonen
+                          en de gebruiker vragen welke gebruikt moet worden.
+  --set <naam> <pad>    <pad> instellen als alternatief voor <naam>.
+  --all                 --config uitvoeren voor alle alternatieven.
+
+Commando's:
+  -b|--build <map> [<deb>]         Een archief bouwen.
+  -c|--contents <deb>              De inhoud tonen.
+  -I|--info <deb> [<cbestand>...]  Info tonen op stdout.
+  -W|--show <deb>                  Informatie over pakket(ten) tonen
+  -f|--field <deb> [<cveld>...]    Veld(en) op stdout tonen.
+  -e|--control <deb> [<map>]       Control-info uitpakken.
+  -x|--extract <deb> <map>         Bestanden uitpakken.
+  -X|--vextract <deb> <map>        Bestanden uitpakken en opsommen.
+  -R|--raw-extract <deb> <map>     Control-info en bestanden uitpakken.
+  --ctrl-tarfile <deb>             Control-tar-archief maken.
+  --fsys-tarfile <deb>             Tar-archief van bestandssysteem maken.
+
+Commando's:
+  -i|--install      <.deb-bestandsnaam> ... | -R|--recursive <map> ...
+  --unpack          <.deb-bestandsnaam> ... | -R|--recursive <map> ...
+  -A|--record-avail <.deb-bestandsnaam> ... | -R|--recursive <map> ...
+  --configure       <pakket> ... | -a|--pending
+  --triggers-only   <pakket> ... | -a|--pending
+  -r|--remove       <pakket> ... | -a|--pending
+  -P|--purge        <pakket> ... | -a|--pending
+  -V|--verify  <pakket>  ...       De integriteit van pakket(ten) verifiëren.
+  --get-selections [<patroon> ...] De lijst van selecties op stdout tonen.
+  --set-selections                 Pakketselecties instellen vanuit stdin.
+  --clear-selections               Elk niet-essentieel pakket deselecteren.
+  --update-avail [<Packages-best>] Info over beschikbare pakketten vervangen.
+  --merge-avail [<Packages-best>]  Met info uit bestand samenvoegen.
+  --clear-avail                    Huidige info over beschikbaarheid vervangen.
+  --forget-old-unavail             Niet-geïnstalleerde niet-beschikbare
+                                     pakketten vergeten.
+  -s|--status <pakket> ...         De statusinfo van pakket tonen.
+  -p|--print-avail <pakket> ...    Info over beschikbare versie tonen.
+  -L|--listfiles <pakket> ...      Bestanden die 'van' pakket zijn tonen.
+  -l|--list [<patroon> ...]        Lijst van pakketten bondig weergeven.
+  -S|--search <patroon> ...        Pakket(ten) zoeken die bestand(en) bevatten.
+  -C|--audit [<pakket> ...]        Controleren op defect(e) pakket(ten).
+  --yet-to-unpack                  Voor installatie geselecteerde
+                                     pakketten weergeven.
+  --predep-package                 Uit te pakken voorvereisten weergeven.
+  --add-architecture <arch>        <arch> aan architecturenlijst toevoegen.
+  --remove-architecture <arch>     <arch> uit architecturenlijst verwijderen.
+  --print-architecture             dpkg-architectuur weergeven.
+  --print-foreign-architectures    Toegelaten vreemde architecturen tonen.
+  --assert-<functionaliteit>       Ondersteuning voor de vermelde
+                                     functionaliteit beweren.
+  --validate-<ding> <tekenreeks>   Een <tekenreeks> van <ding> valideren.
+  --compare-versions <a> <op> <b>  Versienummers vergelijken - zie onder.
+  --force-help                     Hulp over forceren tonen.
+  -Dh|--debug=help                 Hulp over debuggen tonen.
+
+Commando's:
+  -s|--status <pakketnaam> ... Details over pakketstatus tonen.
+  -p|--print-avail <pakketnaam> ...
+                               Details over beschikbare versie tonen.
+  -L|--listfiles <pakketnaam> ...
+                               Bestanden 'van' pakket(ten) opsommen.
+  -l|--list [<patroon> ...]    De pakketten beknopt opsommen.
+  -W|--show [<patroon> ...]    De informatie over pakket(ten) tonen.
+  -S|--search <patroon> ...    Pakket(ten) zoeken die bestand(en) bevatten.
+     --control-list <pakket>   Lijst van controlebestanden v/h pakket tonen.
+     --control-show <pakket> <bestand>
+                               De inhoud van het controlebestand tonen.
+  -c|--control-path <pakket> [<bestand>]
+                               Het pad van het controlebestand tonen.
+
+Commando's:
+  -s|--split <bestand> [<prefix>]   Een archief splitsen.
+  -j|--join <deel> <deel> ...       Delen combineren.
+  -I|--info <deel> ...              Info tonen over deel.
+  -a|--auto -o <compleet> <deel>    Delen auto-combineren.
+  -l|--listq                        Geïsoleerde delen tonen.
+  -d|--discard [<bestand> ...]      Geïsoleerde delen verwijderen.
+
+Commando's:
+  [--add] <bestand>        een omleiding toevoegen.
+  --remove <bestand>       de omleiding verwijderen.
+  --list [<glob-patroon>]  bestandsomleidingen tonen.
+  --listpackage <bestand>  tonen welk pakket het bestand omleidt.
+  --truename <bestand>     vermelden wat het omgeleide bestand is.
+
+Vergelijkingsoperatoren voor --compare-versions zijn:
+  lt le eq ne ge gt       (versieloos komt eerder dan gelijk welke versie);
+  lt-nl le-nl ge-nl gt-nl (versieloos komt later dan gelijk welke versie);
+  < << <= = >= >> >       (enkel voor compatibiliteit
+                            met de syntaxis van control-bestanden).
+
+Configuratiebestand '%s'
+Configuratiebestand '%s' (eigenlijk '%s')
+Elk pakket configureren dat dit pakket kan helpenBezig met de-configureren van %s (%s) ...
+Bezig met de-configureren van %s (%s), zodat %s (%s) verwijderd kan worden ...
+Zoekhulpmiddel van het programma voor Debian pakketbeheer %s versie %s.
+Debian %s pakkettriggerhulpmiddel versie %s.
+Debian %s versie  %s.
+Debian '%s' pakketarchiefbackend versie %s.
+Programma voor Debian pakketbeheer '%s' versie %s.
+Debian '%s' hulpmiddel voor splitsen/samenvoegen van pakketten; versie %s.
+%s verwijderd.
+Vereisten en conflictenOmschrijvingGevraagd=(U)onbekend/(I)nstalleren/ve(R)wijderen/(P)wissen/(H)ouden
+| Status=Niet/Inst/Conf/Uitgep/halF-geconf/Halfgeïnst/verWacht-trig/Trig-bezig
+|/ Fout?=(geen)/heRinst. nodig/ (Status,Fout: hoofdletter=ernstig)
+Niet chrooten naar de omgeving van een pakketonderhouder-scriptGeen veilige I/O-bewerkingen uitvoeren bij het uitpakkenFouten gevonden tijdens verwerken van:
+Afsluitstatus:
+  0 = oké
+  1 = met --auto, bestand is geen onderdeel
+  2 = problemen
+Bestand '%.250s' is geen onderdeel van een meerdelig archief.
+Syntaxis voor een indeling:
+  Een indeling is een tekenreeks die gebruikt wordt voor de uitvoer over
+  elk pakket. De indeling mag de standaard 'escape'-sequenties bevatten:
+  \n (nieuwe regel), \r (wagenterugloop), \\ (gewone backslash).
+  Pakketinformatie kan ingevoegd worden door met variabelen te
+  refereren naar pakketvelden via de ${var[;breedte]} syntaxis.
+  Velden worden rechts uitgelijnd tenzij de breedte negatief is.
+  In dat geval worden ze links uitgelijnd.
+Over het algemeen nuttige voortgangsinformatieEen ontbrekende stat override negeren als deze verwijderd wordtVerzoek om gedeelde omleiding '%s' te verwijderen wordt genegeerd.
+Verzoek tot het hernoemen van bestand '%s' dat eigendom is van het omleidende pakket '%s' wordt genegeerd
+Informatie over %d pakket werd bijgewerkt.
+Informatie over %d pakketten werd bijgewerkt.
+Krankzinnig veel gekletsEen pakket installeren, zelfs als de authenticiteitstoets faaldeToch installeren, zelfs al maakt dit een ander pakket defectIncidentele pakketten installeren of verwijderen, ook als ze vastgehouden wordenNieuwe versie van configuratiebestand %s wordt geïnstalleerd ...
+Uitvoering en status van scripts van de pakketbeheerderRommelbestanden zijn in de depotmap achtergebleven:
+'%s' wordt gelaten
+Overvloedige uitvoer i.v.m. vereisten/conflictenVeel gepraat over bijv. de map dpkg/infoOvervloedige uitvoer bij elk configuratiebestandOvervloedige uitvoer bij elk behandeld bestandOvervloedige uitvoer i.v.m. triggersMSDOS bestandseinde (^Z) in veldnaam '%.*s'MSDOS bestandseinde (^Z) in waarde van veld '%.*s' (ontbrekende nieuwe regel?)Meer dan een kopie van pakket %s werd uitgepakt in deze ronde!
+ Wordt slechts een keer geconfigureerd.
+NaamEr is geen omleiding '%s'; er wordt er geen verwijderd.
+Opmerking: het grendelbestand verwijderen is steeds fout en kan leiden tot een
+beschadigd grendelgebied en het volledige systeem. Zie <https://wiki.debian.org/Teams/Dpkg/FAQ>.NOOT: PATH van root zou gewoonlijk /usr/local/sbin, /usr/sbin en /sbin moeten bevattenEr is niets in te stellen.Voorstellen om configuratiebestanden te vervangen door versies die niet recenter zijnOpties:
+  --admindir <map>        map met statusmodificatie-bestand instellen.
+  --instdir <map>         hoofdmap (root) instellen,
+                            maar niet de beheersmap (admindir).
+  --root <map>            hoofdbestandssysteemmap instellen.
+  --update                <pad>-rechten onmiddellijk bijwerken.
+  --force                 verouderde alias voor --force-all.
+  --force-<ding>[,...]    problemen overstijgen (zie --force-help).
+  --no-force-<ding>[,...] stoppen als er problemen zijn.
+  --refuse-...            idem.
+  --quiet                 stille verwerking, minimale uitvoer.
+  --help                  deze hulptekst tonen.
+  --version               de versie tonen.
+
+Opties:
+  --admindir=<map>           <map> gebruiken in plaats van %s.
+  --by-package=<pakket>      Triggerafwachter overstijgen (normaal
+                               ingesteld door dpkg).
+  --await                    Pakket moet de afhandeling afwachten.
+  --no-await                 Geen pakket moet de afhandeling afwachten.
+  --no-act                   Enkel testen - niets echt wijzigen.
+
+Opties:
+  --admindir=<map>     <map> gebruiken in plaats van %s.
+  --load-avail         Bestand 'available' gebruiken bij --show en --list.
+
+  --no-pager           Pagineringsprogramma uitzetten.
+
+  -f|--showformat=<indeling>
+                       Alternatieve indeling gebruiken voor --show
+
+Opties:
+  --admindir=<map>         <map> gebruiken in plaats van %s.
+  --root=<map>             Op een andere hoofdmap installeren.
+  --instdir=<map>          De hoofdmap maar niet de beheersmap veranderen.
+  --pre-invoke=<command>   Een pre-invoke hook instellen.
+  --post-invoke=<command>  Een post-invoke hook instellen.
+  --path-exclude=<patroon> Geen paden installeren die met shell-patroon
+                             overeenkomen.
+  --path-include=<patroon> Patroon terug toevoegen na een eerdere uitsluiting.
+  -O|--selected-only       Pakketten die niet geselecteerd werden voor
+                             installatie/opwaardering, overslaan.
+  -E|--skip-same-version   Pakketten met dezelfde versie
+                             als de geïnstalleerde, overslaan.
+  -G|--refuse-downgrade    Pakketten met oudere versie
+                             dan de geïnstalleerde, overslaan.
+  -B|--auto-deconfigure    Installeren, zelfs als dit een ander pakket vernielt.
+  --[no-]triggers          Volgende triggerverwerking overslaan of forceren.
+  --verify-format=<indeling>
+                           Uitvoerindeling verifiëren (ondersteund: 'rpm').
+  --no-pager               Pagineringsprogramma uitzetten.
+  --no-debsig              Geen digitale handtekeningen op pakketten
+                             trachten te verifiëren.
+  --no-act|--dry-run|--simulate
+                           Enkel zeggen wat dpkg zou doen - het niet doen.
+  -D|--debug=<octaal>      Debuggen activeren (zie -Dhelp of --debug=help).
+  --status-fd <n>          Info over statuswijzigingen zenden
+                             naar bestandsindicator <n>.
+  --status-logger=<commando>
+                           Info over statuswijzigingen zenden
+                             naar stdin van <commando>.
+  --log=<bestandsnaam>     Statusveranderingen en
+                             acties loggen naar <bestandsnaam>.
+  --ignore-depends=<pakket>,...
+                           Vereisten bij <pakket> negeren.
+  --force-<ding>[,...]     Problemen overstijgen (zie --force-help).
+  --no-force-<ding>[,...]  Stop bij problemen.
+  --refuse-<ding>[,...]    Idem.
+
+  --abort-after <n>        Afbreken na <n> fouten.
+
+
+  --robot                  Machine-leesbare uitvoer bij sommige commando's.
+
+Opties:
+  --altdir <map>       de map met alternatieven veranderen.
+  --admindir <map>     de beheersmap veranderen.
+  --instdir <map>      de installatiemap veranderen.
+  --root <map>         de basismap voor het bestandssysteem wijzigen.
+  --log <bestand>      het logbestand veranderen.
+  --force              toelaten dat bestanden vervangen worden
+                         door alternatieven-koppelingen.
+  --skip-auto          in automatische modus prompt overslaan bij correct
+                         geconfigureerde alternatieven (enkel voor --config)
+  --quiet              stille verwerking, minimale uitvoer.
+  --verbose            luidruchtige verwerking, meer uitvoer.
+  --debug              debug-uitvoer, veel meer uitvoer.
+  --help               deze hulptekst tonen.
+  --version            de versie tonen.
+Opties:
+    --depotdir <map>             <map> gebruiken in plaats van %s/%s.
+    -S|--partsize <grootte>      In Kb; (voor -s is de standaard 450).
+    -o|--output <bestand>        Bestandsnaam, voor -j (standaard is
+                                   <pakket>_<versie>_<architectuur>.deb).
+    -Q|--npquiet                 Stille verwerking als -a geen deel is.
+    --msdos                      Type 8.3 bestandsnamen genereren.
+
+Opties:
+  --package <pakket>       naam van het pakket wiens exemplaar van <bestand>
+                             niet omgeleid zal worden.
+  --local                  alle versies van pakketten worden omgeleid.
+  --divert <omleiden-naar> de naam die door de versies van andere pakketten
+                             gebruikt wordt.
+  --rename                 het bestand werkelijk weg- (of terug-)zetten.
+  --no-rename              het bestand niet weg- (of terug-)zetten.
+                             (standaard).
+  --admindir <map>         de map met het omleidingenbestand instellen.
+  --instdir <map>          de hoofdmap (root) instellen,
+                             maar niet de beheersmap (admindir).
+  --root <map>             de map van het hoofdbestandssysteem instellen.
+  --test                   niets doen, enkel tonen wat zou gebeuren.
+  --quiet                  stille verwerking, minimale uitvoer.
+  --help                   deze hulptekst tonen.
+  --version                de versie tonen.
+
+Opties:
+  -v, --verbose                  Uitvoerige uitvoer activeren.
+  -D, --debug                    Debug-uitvoer activeren.
+      --showformat=<formaat>     Andere indeling gebruiken met --show.
+      --deb-format=<formaat>     Archiefformaat selecteren.
+                                  Geldige waarden: 0.939000, 2.0 (standaard).
+      --nocheck                  Toets van 'control'-bestand onderdrukken
+                                  (bouwt ongeldige pakketten).
+      --root-owner-group         Stelt eigenaar en groep dwingend in op root.
+      --[no-]uniform-compression De compressieparameters gebruiken
+                                  voor alle elementen.
+  -z#                            Bouwcompressieniveau instellen.
+  -Z<type>                       Bouwcompressietype instellen.
+                                  Geldige types: gzip, xz, none.
+  -S<strategie>                  Bouwcompressiestrategie instellen.
+                                  Geldige waarden: none; extreme (xz);
+                                  filtered, huffman, rle, fixed (gzip).
+
+Uitvoer bij elk configuratiebestandUitvoer bij elk behandeld bestandEen omgeleid bestand overschrijven met een niet-omgeleide versieEen bestand uit een pakket overschrijven met dat uit een ander pakketEen bestaande stat override overschrijven als deze toegevoegd wordtEen map van een pakket overschrijven met een bestand uit een ander pakketPATH loopt belangrijke programma's mis; problemen zijn waarschijnlijkPATH is niet ingesteldPakket %s wordt vastgehouden; er wordt niets mee gedaan.
+ Gebruik --force-hold om deze richtlijn te negeren.
+Pakket %s wordt meer dan eens vermeld, wordt slechts een keer behandeld.
+Pakket '%s' bevat geen enkel bestand (!)
+Nog niet opnieuw samengevoegde pakketten:
+Deel %d van pakket %s opgeslagen (ik wil nog PadVeld Pre-DependsUitpakken van %s wordt voorbereid...
+Druk <enter> om de huidige keuze[*] te behouden, of typ een keuzenummer in: PrioriteitOok pakketten verwerken met foute of ontbrekende architectuurZelfs pakketten met foute versienummers verwerkenBezig met afhandelen van triggers voor %s (%s) ...
+Verwerking werd afgebroken omdat er te veel fouten waren.
+Beschermd veldConfiguratiebestanden voor %s (%s) worden gewist ...
+Pakket %s wordt samengesteld uit %d onderdeel:Pakket %s wordt samengesteld uit %d onderdelen:Informatie over %s uit %s is opgenomen.
+Een beschermd pakket verwijderenEen essentieel pakket verwijderenPakketten verwijderen die een installatie vereisen%s (%s) wordt verwijderd ...
+'%s' wordt verwijderd
+Een pakket vervangen door een eerdere versieVervangen door bestanden uit geïnstalleerd pakket %s (%s) ...
+De oude info over beschikbare pakketten wordt vervangen door %s.
+Bezig met vervangen van bestanden in het oude pakket %s (%s) ...
+Voer update-alternatives uit om de alternatievenselecties op het systeem te wijzigenVoorheen niet geselecteerd pakket %s wordt geselecteerd.
+KeuzeAlle forceeropties instellenInstellen van %s (%s) ...
+Belachelijk veel uitvoer i.v.m. triggersOngeldige regel wordt overgeslagen: %sOnbekend alternatief %s overslaan.Niet geselecteerd pakket %s wordt overgeslagen.
+Pakket %s wordt in %d deel opgedeeld:Pakket %s wordt in %d delen opgedeeld:StatusDe volgende pakketten wachten op het verwerken van triggers die zij
+geactiveerd hebben bij andere pakketten. De verwerking ervan kan
+gevraagd worden met dselect of dpkg --configure --pending
+(of dpkg --triggers-only):
+De volgende pakketten zijn een rommeltje wegens ernstige problemen
+tijdens de installatie.  Ze moeten opnieuw geïnstalleerd worden om ze (en
+pakketten die ervan afhankelijk zijn) goed te laten functioneren:
+De volgende pakketten hebben geen bestandslijst-controlebestand in de
+database; zij moeten opnieuw geïnstalleerd worden:
+De volgend pakketten hebben geen controlebestand met md5-controlesommen
+in de database; zij moeten opnieuw geïnstalleerd worden:
+De volgende pakketten zijn slechts half geconfigureerd, waarschijnlijk
+wegens problemen tijdens de eerste configuratiepoging.  Het
+configureren zou opnieuw moeten gebeuren met dpkg --configure <pakket>
+of met de menuoptie Configureren in dselect:
+De volgende pakketten zijn slechts half geïnstalleerd, wegens
+problemen met de installatie.  De installatie kan waarschijnlijk
+afgerond worden na een nieuwe poging; de pakketten kunnen verwijderd
+worden met dselect of met dpkg --remove:
+De volgende pakketten hebben geen archtectuuraanduiding:
+De volgende pakketten gebruiken een ongeldige architectuuraanduiding:
+De volgende pakketten geven een onbekende vreemde architectuur op; dit 
+zal tot vereistenproblemen leiden bij frontends. Dit kan gerepareerd
+worden door de architectuur te registreren met dpkg --add-architecture:
+De volgende pakketten werden getriggerd, maar het verwerken van de
+triggers gebeurde nog niet. Het verwerken van de triggers kan gevraagd
+worden met dselect of met dpkg --configure --pending
+(of dpkg --triggers-only):
+De volgende pakketten zijn uitgepakt maar nog niet geconfigureerd.  Ze
+moeten geconfigureerd worden met dpkg --configure of de menuoptie
+Configureren in dselect om ze te laten werken:
+Er is %d beschikbare keuzemogelijkheid voor het alternatief %s (dat voorziet in %s).Er zijn %d beschikbare keuzemogelijkheden voor het alternatief %s (dat voorziet in %s).Er is geen programma dat %s voorziet.Koppelingsgroep %s (die voorziet in %s) bevat slechts één alternatief: %sDit is vrije programmatuur; zie de GNU General Public Licentie versie 2
+of later voor kopieervoorwaarden. Er is GEEN garantie.
+Activering en verwerking van triggersTrachten om zaken te (de)installeren, zelfs al bent u geen systeembeheerderAlle vereistenproblemen omzetten naar waarschuwingenAlle versiegebonden vereistenproblemen omzetten naar waarschuwingenTyp 'exit' als u klaar bent.
+Typ dpkg --help voor hulp met installatie en deïnstallatie van pakketten [*];
+Gebruik 'apt' of 'aptitude' voor gebruikersvriendelijk pakketbeheer;
+Typ dpkg -Dhelp voor een lijst van dpkg debugopties;
+Typ dpkg --force-help voor een lijst met forceeropties;
+Typ dpkg-deb --help voor hulp met manipuleren van *.deb-bestanden;
+
+Opties gemarkeerd met [*] geven veel uitvoer - pijp die door 'less' of 'more'!Typ dpkg-deb --help voor hulp bij manipuleren van *.deb-bestanden;
+Typ dpkg --help voor hulp bij installeren en verwijderen van pakketten.Typ dpkg-split --help voor hulp.Typ dpkg-trigger --help voor hulp over dit hulpmiddel.Bezig met uitpakken van %s (%s) ...
+Bezig met uitpakken van %s (%s) over (%s) ...
+De info over beschikbare pakketten wordt bijgewerkt met %s.
+Gebruik: %s [<optie> ...] <commando>
+
+Gebruik: %s [<optie>...] <commando>
+
+Gebruik: %s [<opties>...] <triggernaam>
+         %s [<opties>...] <commando>
+
+Gebruik '%s --help' voor informatie over het gebruik van het programma.Gebruik 'apt' of 'aptitude' voor gebruikersvriendelijk pakketbeheer.
+Gebruik --help voor hulp i.v.m. het omleiden van bestanden.Gebruik --help voor hulp over het overstijgen van bestandsstatusinfo.Gebruik --help voor hulp over zoekopdrachten op pakketten.MAC-gebaseerde beveiliging gebruiken, indien beschikbaarGebruik dpkg --contents (= dpkg-deb --contents) om de inhoud van archiefbestanden weer te geven.
+Gebruik dpkg --info (= dpkg-deb --info) om archiefbestanden te bekijken.
+Gebruik dpkg met -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+op archieven (typ %s --help.)
+
+De standaardoptie gebruiken voor nieuwe configuratiebestanden als zo een
+standaard bestaat; er geen vragen over stellen. Als geen standaard gevonden
+wordt, zal er u een vraag over gesteld worden, tenzij ook de optie
+confold of de optie confnew ingesteld isHandige omgevingsvariabelen:
+Valideerbare zaken zijn: pkgname, archname, trigname, version.
+
+VersieVersie van dpkg met functionele ondersteuning voor %s is nog niet
+ geconfigureerd. Gelieve 'dpkg --configure dpkg' uit te voeren
+ en dan opnieuw te proberen.
+Bij het toevoegen zijn de standaardopties --local en --divert <original>.distrib.
+Bij het verwijderen --package of --local en, indien opgegeven, moet --divert overeenkomen.
+De preinst/postrm-scripts van pakketten moeten altijd --package en --divert opgeven.
+Zou %s (%s) verwijderen of wissen ...
+[standaard=N][standaard=Y][geen standaard]de beheersmap (admindir) moet onder de hoofdmap (instdir) liggen opdat dpkg goed zou kunnen functionerenook '%s' wordt geconfigureerd (vereist door '%s')alternatief %s (deel van koppelingsgroep %s) bestaat niet; wordt verwijderd van lijst van alternatievenalternatief %s kan geen primair zijn: het is een slaaf van %salternatief %s kan geen slaaf van %s zijn: het is een primair alternatiefalternatief %s kan geen slaaf van %s zijn: het is een slaaf van %salternatief %s voor %s is niet geregistreerd. Wordt niet verwijderdalternatief %s voor %s is niet geregistreerd. Wordt niet ingesteldde verwijzing naar alternatief %s wordt reeds door %s beheerdde verwijzing van alternatief %s wordt reeds door %s beheerd (slaaf van %s)de verwijzing naar het alternatief is niet absoluut zoals ze hoort te zijn: %sde naam (%s) voor een alternatief mag geen '/' en geen spaties bevattenhet alternatievenpad %s%s bestaat niethet pad van het alternatief is niet absoluut zoals het hoort te zijn: %salternatieven ('|') niet toegestaan in veld '%s'dubbelzinnige pakketnaam '%s' met meer dan een geïnstalleerd exemplaarer is een fout opgetreden zonder dat er een foutafhandeling is uitgevoerder bestaat reeds een overstijging voor '%s', maar --force is opgegeven waardoor dit genegeerd wordter bestaat reeds een overstijging voor '%s'; er wordt gestoptelke omleiding van %selke omleiding van %s naar %sde naam '%s' van het ar-element is te langde omvang %jd van het ar-element is te groot<leeg><geen><onbekend>architectuur '%s' is ongeldig: %sarchitectuur '%s' is gereserveerd en kan niet toegevoegd wordenarchitectuurnaam '%s' is niet geldig: %sarchief '%.250s' bevat twee controle-elementen; er wordt opgegevenin archief '%s' komt element '%.*s' voortijdig voor '%s'; er wordt opgegevenarchief '%s' is geen gewoon bestandarchief '%s' gebruikt een onbekende compressie voor element '%.*s'; er wordt opgegevenarchief bevatte object '%.255s' van het onbekende type 0x%xgrootte van het controle-element van het archiefveld '%s' met de archiefdetails niet toegestaan in statusbestandarchief gebruikt een ongeldig formaatversienummer: %sde grootte van het controle-element van het archief is opgegeven in een verkeerd formaat '%s'archief heeft geen nieuwe regels in koptekstelement van archiefinformatiekopteksthet formaatversienummer van het archief is %d.%d; u heeft een nieuwere dpkg-deb nodigmagisch versienummer van het archiefkoptekst van archiefelementnummers van archiefonderdelenplaats van het archiefonderdeelnummer van archiefonderdelentotale grootte van het archiefautomatische modusautomatische opwaarderingen van %s/%s zijn uitgeschakeld; het wordt met rust gelaten.het verwerken van triggers door een ander pakket wordt afgewachtlege regel in waarde van veld '%.*s'booleaans (yes/no) veld '%s': %sdefect wegens een mislukte poging om te verwijderen of te installerendefect wegens mislukte poging tot uitvoeren 'postinst'-scripteen onbekend pakket wordt gebouwd in '%s'.pakket '%s' wordt gebouwd in '%s'.kan onbekende keuze %s niet installerenkan bestand '%.255s' met pakketinformatie niet met mmap ladenkan oud postrm-script niet verwijderenkan status van bestand '%.255s' met pakketinformatie niet opvragenkrijg geen toegang tot archief '%s'kan bestand (%s) van ar-elementen niet toevoegen aan '%s': %skan het deel '%s' van een opgesplitst pakket niet toevoegen aan '%s': %skan niets toevoegen aan '%s'kan de pijp van het decompressieprogramma niet sluitenkan de MD5-frommel voor bestand '%s' niet berekenen: %skan de MD5-frommel voor het archiefbestand '%.255s' niet berekenen: %skan multibyte sequentie '%s' niet omzetten naar een van het type 16 bitskan multibyte tekenreeks '%s' niet naar een 16 bits tekenreeks omzettenkan '%s' niet naar archief '%s' kopiëren: %skan '%s' niet naar '%s' kopiëren: %skan het archiefelement van '%s' niet kopiëren naar de pijp van het decompressieprogramma: %skan uitgepakte gegevens voor '%.255s' niet kopiëren naar '%.255s': %skan beheersmap '%s' niet aanmakenkan alternatievenmap '%s' niet aanmakenkan basismap voor %s aanmakenkan map %s niet aanmakenkan logmap '%s' niet aanmakenkan de dpkg-databasemap %s niet aanmakenkan de map %s met dpkg-updates niet makenkan geen mappen omleidenkan bestand '%s' niet naar zichzelf omleidenkan controlebestand '%s' niet uit '%s' extraheren: %skan deel '%s' van opgedeeld pakket niet uitpakken: %skan laatste wijzigingstijd in het bestandssysteem niet verkrijgen voor pakket %skrijg geen greep op beveiligingsmarkeringkan %s niet openenkan '%.255s' niet openen (in '%.255s')kan het archiefonderdeel, bestand '%.250s', niet openenkan map '%s' niet openenkan bestand %s niet openenkan het meldingskanaal voor de veiligheidsstatus niet openenkan %s niet lezenkan configuratiemap '%.250s' niet lezen (van '%.250s')kan infomap niet lezenkan '%.250s' niet verwijderenkan architectuur '%s' die momenteel door de database gebruikt wordt, niet verwijderenkan niet-vreemde architectuur '%s' niet verwijderenkan oude reservekopie van configuratiebestand '%.250s' (van '%.250s') niet verwijderenkan oud configuratiebestand '%.250s' niet verwijderen (= '%.250s')kan oude bestandenlijst niet verwijderenkan '%s' niet als '%s' hernoemenkan niet voldoen aan voor-vereisten voor %.250s (gewenst wegens %.250s)kan map '%.255s' niet aflezenkan map `%.255s' met bijwerkingen niet doorzoekenkan geen manier vinden om aan voor-vereiste te voldoen:
+ %skan primaire groeps-ID niet instellen op rootkan de beveiligingscontext voor bestandsobject '%s' niet instellenkan voor de uitvoering van het pakketbeheerdersscript de veiligheidscontext niet instellenkan het archiefcontrole-element van '%s' niet overslaan: %skan archiefelement van '%s' niet overslaan: %skan in de pijp bestand '%.255s' (vervangen of uitgesloten?) niet overslaan: %skan het opvullen van bestand '%.255s' niet overslaan: %sKan de kop van een opgesplitst pakket voor '%s' niet overslaan: %s.kan de status van %s niet opvragenkan de status van '%.255s' niet opvragen (in '%.255s')kan de status van bestand '%s%s' niet opvragenkan de status van bestand '%s' niet opvragenkan de status van padnaam '%s' niet opvragenkan bestand %s niet naar het pagineringsprogramma schrijvenkan niet schrijven naar logbestand '%s': %skan eventuele nakomende nullen van dpkg-deb niet vernietigen: %steken `%c' is niet toegestaan (enkel letters, cijfers en de tekens '%s')gecomprimeerde gegevens zijn beschadigdtar-element wordt gecomprimeerdconfiguratiebestand '%.250s' zit niet in het pakketstatus van configuratiebestand '%.250s' is niet opvraagbaarconfiguratiebestand '%s' is geen gewoon bestandhulpmiddel voor het weergeven van verschillen in configuratiebestandenconffile-configuratiebestand bevat een lege regelnaam van configuratiebestand '%s' eindigt met leegruimtenaam van configuratiebestand '%s' werd gedupliceerdconfiguratiebestandsnaam '%s is geen absolute padnaamconfiguratiebestandsnaam '%s' is te lang, of afsluitende nieuwe regel ontbreektshell t.b.v. configuratiebestandconfiguratiefout: %s:%d: %stegenstrijdige acties -%c (--%s) en -%c (--%s)tegenstrijdige omleidingen waarbij '%.250s' of '%.250s' betrokken zijnconflicterende pakketten - %.250s wordt niet geïnstalleerdhet afbouwen van de configuratie van %s, dat door %s defect gemaakt zou worden, wordt overwogen...er wordt overwogen om de configuratie van het essentiële
+ pakket %s af te bouwen, om %s mogelijk te makener wordt overwogen om de configuratie van het beschermde
+ pakket %s af te bouwen, om %s mogelijk te makenhet verwijderen van %s ten gunste van %s wordt overwogen...controlemap heeft foutieve permissies %03lo (moet >=0755 en <=0775 zijn)controlemap is geen mapcontrolebestand '%s' bestaat nietcontrolebestand '%s' voor pakket '%s' bevat een lege bestandsnaamcontrolebestand '%s' voor pakket '%s' heeft geen afsluitend regeleindecontrolebestand '%s' voor pakket '%s' heeft een ontbrekende waardecontrolebestand '%s' voor pakket '%s' heeft een ontbrekend waardescheidingstekencontrolebestand bevat %ccontrole-elementbeschadigd opmaakbestand '%s' van de infodatabasebeschadigd tar-bestand met het bestandssysteem in pakketarchiefkon logbestand '%s' niet openen: %skon status niet opvragen van het oude bestand '%.250s', dus wordt het niet verwijderd: %skon '%i' niet openen voor een stroomhuidig alternatief %s is onbekend; er wordt overgeschakeld op %s voor koppelingsgroep %scyclus aangetroffen tijdens het afhandelen van triggers:
+ reeks pakketten wiens triggers verantwoordelijk zijn of kunnen zijn:gegevenselementvereistenproblemen - triggers blijven onbehandeldvereistenproblemen - blijft ongeconfigureerdvereistenproblemen - wordt niet verwijderdvereistenproblemen verhinderen de configuratie van %s:
+%svereistenproblemen verhinderen de triggerafhandeling voor %s:
+%svereistenproblemen verhinderen het verwijderen van %s:
+%sverouderde optie --%s; gelieve in plaats ervan --%s te gebruikenverouderde slaafkoppeling %s wordt weggegooid (%s).omleiding door %s van: %s
+omleiding door %s naar: %s
+omleiding van %s door %somleiding van %s naar %s door %somleiden-naar mag geen regeleinden bevattenomgeleid door %s naar: %s
+omleiden met 'rename' van bestand '%s' uit een Essentieel pakket is gevaarlijk; gebruik --no-renameklaar
+%.250s wordt gedegradeerd van %.250s naar %.250sdpkg-databasevergrendelingdpkg-frontendvergrendelingdpkg is niet als geïnstalleerd geregistreerd; kan niet controleren op
+ ondersteuning voor %s!
+verwacht triggerpakket '%.255s' in het dubbelbestandstrigger voor bestandsnaam '%.250s' en pakket '%.250s'is tweemaal aanwezigdubbel pad %sdubbele in de wacht staande trigger '%.255s'dubbele slaafkoppeling %sdubbele slaafnaam %sdubbele waarde voor veld '%s'dubbele waarde voor door gebruiker gedefinieerd veld '%.*s'leeg veld '%s' met archiefdetailslege veldnaamlege tekenreeks van fgets bij lezen van configuratiebestandenlege triggernamen zijn niet toegelatenlege waarde voor veld '%s'einde bestand na veldnaam '%.*s'bestandseinde komt voor de waarde van veld '%.*s' (ontbrekende afsluitende nieuwe regel)bestandseinde in waarde van veld '%.*s' (ontbrekende afsluitende nieuwe regel)bestandseinde op stdin bij de prompt i.v.m. configuratiebestandepochepoch in versienummer is leegepoch in versienummer is negatiefepoch in versienummer is geen nummerepoch in versienummer is te grootfoutfout bij het controleren van '%s'fout bij sluiten van %.250sfout bij sluiten van configuratiebestand '%.255s'fout bij het sluiten van/schrijven naar '%.255s'fout bij het aanmaken van het apparaatbestand '%.255s'fout bij het maken van de map '%.255s'fout bij het maken van de vaste koppeling '%.255s'fout bij het aanmaken van nieuw back-upbestand '%s'fout bij het aanmaken van de pijp '%.255s'fout bij het maken van de symbolische koppeling '%.255s'fout bij verifiëren dat '%.250s' niet bestaatfout bij het uitvoeren van uitbreiding '%s'; foutcode %dfout bij het opmaken van de tekenreeks als varbuf-variabelefout in formaat voor show: %sfout bij installeren van nieuw bestand '%s'fout bij openen van bestand net configuratiebestandenfout bij openen van configuratiemap '%s'fout bij verwerken van archief %s (--%s):
+ %sfout bij verwerken van pakket %s (--%s):
+ %sfout bij lezen van %.250sfout bij lezen van %s uit bestand %.255sfout bij lezen van bestand met configuratiebestandenfout bij het lezen uit de 'dpkg-deb'-pijpfout bij lezen van bestand '%.250s' met uitgestelde triggersfout bij het verwijderen van oud back-upbestand '%s'fout bij het instellen van de eigenaar van '%.255s'fout bij het instellen van de eigenaar van de symbolische koppeling '%.255s'fout bij het instellen van de rechten op '%.255s'fout bij het instellen van de tijdsgegevens voor '%.255s'fout bij openen van %.250sfout bij het stoppen met afvangen van signaal %s: %s
+fout tijdens opruimenfout bij schrijven naar '%s'fout bij schrijven naar '%s'fout bij schrijven naar '%s'fout bij schrijven naar de lijst van architecturenfout bij schrijven naar stderr, ontdekt voor de prompt i.v.m. configuratiebestandgeheugen toewijzen is misluktgeheugen vrijmaken voor nieuwe regel in lijst van mislukte pakketten is mislukt: %schdir naar '%.255s' is misluktchdir naar de map is misluktchroot naar '%.250s' is misluktkan niet afsluiten na lezen: '%.255s'aanmaken map is misluktaanmaken van pijp is misluktdup op bestandsindicator %d is misluktdup op std%s is misluktkon status van bestand (%s) van ar-elementen niet opvragen met fstatkan status van archief niet opvragenkon de status van het omleidingenbestand niet opvragenkan de status van het statusmodificatie-bestand niet opvragenaanmaken van tijdelijk bestand (%s) is misluktkon configuratiebestand '%.255s' niet openen om te lezen: %skon omleidingenbestand niet openenfout bij het openen van bestand '%.255s' met pakketinformatie om er uit te lezenkan statusmodificatie-bestand niet openenopenen van bestand '%.250s' met triggeraangelegenheden is misluktlezen is misluktkan '%.255s' niet lezen (in '%.255s')kan niet lezen uit archief '%.255s'kon ingebouwd bijwerkingenbestand %.255s niet verwijderenkon mijn eigen bijwerkingenbestand %.255s niet verwijderenterugspoelen van tijdelijk bestand (%s) is misluktterugspoelen van bestand '%.250s' met triggeraangelegenheden is misluktzoekbewerking misluktekon de status (via pointer) van bestaande symbolische koppeling '%.250s' niet opvragende status opvragen (via pointer) van de voorgestelde nieuwe bestemming '%.250s' voor symbolische koppeling '%.250s' is misluktstatus bepalen van tijdelijk bestand (%s) is misluktkoppeling verwijderen van tijdelijk bestand (%s) is mislukt, %sschrijven is mislukthet schrijven van databaserecord %s over '%.50s' naar '%.250s' is misluktwegschrijven van details van '%.50s' naar '%.250s' is misluktschrijven van bestandsnaam naar de 'tar'-pijp (%s) is misluktfgets kwam terug met een lege tekenreeks uit '%.250s'veldnaam '%.*s' mag niet beginnen met een koppeltekenveldnaam '%.*s' moet gevolgd worden door een dubbele puntveldgrootte valt buiten het bereikbestand '%.250s' heeft een ongeldig formaat-versienummer: %sbestand '%.250s' is beschadigd - %.250s ontbreektbestand '%.250s' is beschadigd - foutieve MD5-controlesom '%.250s'bestand '%.250s' is beschadigd - foutief magisch nummer van archiefkoptekstbestand '%.250s' is beschadigd - foutief nummer van archiefonderdeelbestand '%.250s' is beschadigd - foutief cijfer (code %d) in %sbestand '%.250s' is beschadigd - foute magische code na het einde van de eerste kopbestand '%.250s' is beschadigd - foutieve magische code aan einde tweede kopbestand '%.250s' is beschadigd - foutief aantal archiefonderdelenbestand '%.250s' is beschadigd - foutief opvulteken (code %d)bestand '%.250s' is beschadigd - ontbrekende nieuwe regel na %.250sbestand '%.250s' is beschadigd - geen slash tussen de nummers van de archiefonderdelenbestand '%.250s' is beschadigd - nultekens in infosectiebestand '%.250s' is beschadigd - tweede element is geen data-elementbestand '%.250s' is beschadigd - grootte is fout voor opgegeven deelnummerbestand '%.250s' is beschadigd - te kortbestand '%.250s' is beschadigd - foutief aantal onderdelen voor opgegeven groottesbestand '%.250s' heeft indeling versie %d.%d; u heeft een nieuwere dpkg-split nodigbestand '%.250s' is geen binair archief van Debian (dpkg-split proberen?)bestand '%.250s' is geen onderdeel van het archiefbestand '%s' is beschadigd; geheel getal in %s valt buiten het bereikbestand '%s' is geen archiefonderdeel
+bestandsformaat niet herkendbestand ziet er uit alsof het een archief is dat beschadigd
+ werd door het te downloaden in ASCII-modusbestand mag geen regeleinden bevattenstaat van bestandstriggers vermeldt een ongeldige pakketnaam '%.250s' (voor een aangelegenheid in bestand '%.250s'): %.250sbestandsnaam "%s" is niet absoluutbestanden '%.250s' en '%.250s' zijn geen onderdelen van hetzelfde bestandbestand met de lijst bestanden van pakket '%.250s' bevat een lege bestandsnaambestand met de lijst bestanden van pakket '%.250s' heeft geen afsluitend regeleindebestand met de lijst bestanden van pakket'%.250s' ontbreekt; aangenomen
+wordt dat het pakket momenteel geen geïnstalleerde bestanden heefteerste woord (want) in het veld '%s': %shet opnieuw installeren van alternatief %s wordt afgedwongen, omdat koppelingsgroep %s defect isafsplitsen van nieuw proces is misluktformaat van het versienummer eindigt met rommelformaat van het versienummer bevat geen puntformaat-versienummerformaat van het versienummer bevat een lege hoofdversiecomponentformaat van het versienummer bevat een lege onderversiecomponentformaat van het versienummer bevat een te hoge hoofdversiecomponentformaat van het versienummer bevat een te hoge onderversiecomponentonbekende pakketten gevonden; dit kan betekenen dat de database van beschikbare
+pakketten verouderd is en bijgewerkt moet worden door een frontend;
+gelieve de FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ> te raadplegener werd een beschadigde ar-kop voor '%s' gemaaktgroep '%s' bestaat nietheeft de ongeldige waarde '%.50s'heeft rommel achteraande kop is te lang, waardoor het deel te lang wordt; de naam van het
+pakket of het versienummer moeten uitzonderlijk lang zijn of iets
+dergelijks; ik geef het op%d waarschuwing over de controlebestand(en) wordt genegeerd%d waarschuwingen over de controlebestand(en) worden genegeerdhet defect wordt genegeerd; er wordt mogelijk toch doorgegaan!conflict wordt genegeerd, er wordt mogelijk toch doorgegaan!vereistenprobleem met %s wordt genegeerd:
+%svoor-vereistenprobleem wordt genegeerd!verzoek om %.250s te verwijderen wordt genegeerd omdat het niet geïnstalleerd isverzoek om %.250s te verwijderen wordt genegeerd. Alleen de
+ configuratiebestanden ervan staan nog op het systeem.
+ Gebruik --purge om ook die te verwijderenongeldige architectuurnaam in aanduiding '%s:%s': %songeldige naam voor pakket waarop gewacht wordt '%.250s': %.250songeldige pakketnaam op regel %d: %.250songeldige pakketnaam in verwachte trigger '%.255s': %songeldige pakketnaam in aanduiding '%s%s%s': %songeldig naam voor in de wacht staande trigger '%.255s': %sopmaak van infodatabase (%d) bevat fouten of is te nieuw; probeer het met een nieuwere versie van dpkginfobestand %s/%s aan geen enkel pakket gekoppeldinstalleren van %.250sgeïnstalleerdvan pakket %s werd script %s geïnstalleerdhet installeren van %.250s zou %.250s defect maken, en de configuratie
+afbouwen is niet toegestaan (--auto-deconfigure zou kunnen helpen)het installeren van %.250s zou bestaande programmatuur defect makeninterne foutinterne fout (bug)ongeldig teken '%c' in grootte van element '%.16s' van archief '%.250s'ongeldig teken '%c' in veldgrootteongeldig teken in het revisienummerongeldig teken in het versienummerongeldig compressieniveau voor -%c: %ldongeldige compressieparameters: %songeldig deb-formaat-versienummer: %songeldig getal voor -%c: '%.250s'ongeldig geheel getal voor --%s: '%.250s'ongeldige of onbekende syntaxis in triggernaam '%.250s' (in triggeraangelegenheden voor pakket '%.250s')ongeldige pakketnaam '%.250s' in bestand '%.250s' met uitgestelde triggersongeldige pakketnaam in veld '%s': %songeldige statusmodificatie-gid %s ongeldige statusmodificatie-modus %songeldige statusmodificatie-uid %songeldige statusongeldige checksum van de tar-archiefkopongeldig veld met de checksum van de tar-archiefkopongeldig veld met de 'guid' van de tar-archiefkopongeldig veld met de 'mtime' van de tar-archiefkopongeldig veld met de grootte van de tar-archiefkopongeldig veld met de 'uid' van de tar-archiefkopongeldige tar-archiefkop met leeg naamveldongeldige triggernaam '%.250s': %.250smist een waardegeen regeleinde bij het proberen lezen van %ste lange regel of geen regeleinde bij een poging %s te lezende koppeling %s is zowel primair als slaafcontrolebestand '%s' voor pakket '%s' wordt geladenbestand met de bestandenlijst van pakket '%s' wordt geladenlokale omleiding van: %s
+lokale omleiding van %slokale omleiding van %s naar %slokale omleiding naar: %s
+lokaal omgeleid naar: %s
+lange bestandsnamenbeheerdersscript '%.50s' heeft foute permissies %03lo (moet >=0555 en <=0775 zijn)beheerdersscript '%.50s' is geen gewoon bestand of symbolische koppelingstatus van beheerdersscript '%.50s' is niet opvraagbaarmalloc is mislukt (%zu bytes)handmatige modushoofdbestandhoofdkoppelingmogelijk geeft het verwijderen van %s problemen, aangezien het in %s voorziet ...mag geen lege tekenreeks zijnlimiet van geheugengebruik werd bereiktomleiden-naar komt niet overeen
+  bij het verwijderen van '%s'
+  '%s' gevondenpakketnaam komt niet overeen
+  bij het verwijderen van '%s'
+  '%s' gevondenontbrekend veld '%s'afsluitende accolade ontbreekteen gemengd geheel van pakketten die niet en wel samen geïnstalleerd mogen worden is aanwezig; hoogstwaarschijnlijk te wijten aan een opwaardering vanuit een niet-officiële dpkgmulti-archmeerdere malen komt Conflicts en Replaces voormeerdere exemplaren van pakketten die niet samen geïnstalleerd kunnen worden, zijn aanwezig; hoogstwaarschijnlijk te wijten aan een opwaardering vanuit een niet-officiële dpkger zijn meerdere statusmodificaties voor bestand '%.250s'moet geactiveerd worden door een pakketbeheerdersscript (of door de optie --by-package)moet beginnen met een alfanumeriek tekenmoet beginnen met een alfanumeriek tekende naam %s is zowel primair als slaafheb --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s, --%s of --%s nodigheb een actie-optie nodigvan het nieuwe pakket %s het script %snieuwe regel in veldnaam '%.*s'een nieuwe regel is niet toegelaten in de archiefobjectbenaming '%.255s'nieuwe regel is niet toegestaan in padnaam '%s'regeleinden zijn niet toegelaten in 'update-alternatives'-bestanden (%s)geen 'control'-bestand in controlearchief!geen alternatieven voor %sgeen overstijging aanweziggeen pakketinformatie in '%.255s'er is geen pakket met de naam '%s' geïnstalleerd; kan het niet configurerengeen pakketten gevonden die overeenkomen met %sgeen pad gevonden dat overeenkomt met %snee, %s is essentieel; ik zal de configuratie niet
+ ongedaan maken om %s mogelijk te makennee, %s is beschermd; zal de configuratie niet
+ ongedaan maken om %s mogelijk te makennee, kan niet verder gaan met %s (--auto-deconfigure kan helpen):
+%sde inhoud van het controlegebied wordt niet geverifieerdonvoldoende privileges om de hoofdmap te veranderen met --force-not-root, het gebruik van --force-script-chrootless in overweging nemen?niet geïnstalleerdniet geïnstalleerd maar configuratie is achtergebleven%s wordt niet verwijderd omdat het geen symbolische koppeling is%s wordt niet vervangen door een koppelinger komt niets na de dubbele punt in het versienummerlege pakketnaam in door komma's gescheiden lijst '%.250s' van --%saantal archiefonderdelenverouderd veld '%s' gebruiktverouderde optie '--%s'; niet-beschikbare pakketten worden automatisch opgeruimdverouderd compressietype '%s'; gebruik liever xzverouderd compressietype '%s'; gebruik liever xz of gzipverouderde force/refuse optie '%s'verouderde optie '--%s'van het verouderd pakket %s het script %soud configuratiebestand '%.250s' was een lege map (en is nu verwijderd)het oude bestand '%.250s' is hetzelfde als verschillende nieuwe bestanden! (zowel '%.250s' als '%.250s')oude versie van pakket heeft te lange infobestandsnaam beginnend met '%.250s'enkel exacte versies mogen gebruikt worden voor het veld '%s'openen van onderdeel '%.255s' (in %.255s) is op onverwachte wijze misluktgeen geheugen meer voor een nieuw opschoningsitemgeen geheugen meer voor een nieuw opschoningsitem met veel argumentengeen geheugen meer voor een nieuwe foutcontextbuiten de foutcontext; er wordt gestoptprobleem wordt genegeerd omdat --force aanstaat:pakket %.250s is reeds geïnstalleerd en geconfigureerdpakket %.250s is niet gereed voor configuratie
+ kan het niet configureren (huidige status '%.250s')pakket %.250s is niet gereed voor het afhandelen van triggers
+ (huidige status '%.250s' zonder in de wacht staande triggers)pakket %s %s kan niet geconfigureerd worden, omdat %s van een andere versie is (%s)pakket %s (%s) met veld '%s: %s' mag niet samen geïnstalleerd worden met %s waarvan meerdere exemplaren geïnstalleerd zijnpakket %s kan niet geconfigureerd worden, omdat %s niet gereed is (huidige status '%s')pakket %s bevatte een lijst als infobestandpakket %s behoeft herinstallatie, maar op uw aanvraag wordt het toch verwijderdpakket %s behoeft herinstallatie; zal het niet verwijderenpakket %s was vastgehouden; wordt toch verwerkt zoals door u gevraagdpakket '%s' is niet beschikbaarpakket '%s' is niet geïnstalleerdpakket '%s' is niet geïnstalleerd en er is geen info beschikbaarpakketarchitectuurpakketarchitectuur (%s) komt niet overeen met het systeem (%s)pakketarchitectuur ontbreekt of is leegbestandsnaam van het controle-infobestand van dit pakket is te lang (beginnend met '%.50s')controle-info van het pakket bevatte map '%.250s'rmdir '%.250s' uit pakketcontrole-info zei niet dat het niet om een map gaatcontrole-informatie wordt uit het pakket geëxtraheerdpakket leidt andere om naar: %s
+uitpakken van de waarde van het pakketveldMD5-controlesom van het pakketbestanduitpakken van archief met het bestandssysteem van het pakketpakket bevat veld '%s' maar is van het architectuurtype '%s'pakket bevat veld '%s' maar de architectuur ontbreekthet pakket heeft status %s en het heeft configuratiebestanden. Ze worden vergetende status van het pakket is %s maar er wordt niet op triggers gewachtde status van het pakket is %s maar er staan geen triggers in de wachtde status van het pakket is %s maar er wordt op triggers gewachtde status van het pakket is %s maar er staan triggers in de wachtpakket bevindt zich in een erg slechte en inconsistente staat; u zou het
+ opnieuw moeten installeren alvorens het te proberen verwijderenpakket verkeert in een heel slechte en inconsistente staat; u zou het
+ opnieuw moeten installeren alvorens het te configurerenpakket mag geen regeleinden bevattenpakketnaampakketnaam '%s' is niet geldig: %spakketnaam heeft tekens die geen kleine letters of cijfers of '-+.' zijnpakket op regel %d: %.250s komt niet voor in status-bestand noch in available-bestand (database van beschikbare pakketten)verifiëren van ondertekening van het pakketpakket-versienummerpagineringsprogramma om bestand weer te gevenontleden van bestand '%.255s' bij regel %d:
+ ontleden van bestand '%s' bij regel %d pakket '%s':
+ deel %d ontbreektdeelbestand '%.250s' is geen gewoon bestandgrootte van het onderdeel is veel te groot of niet positiefeen deel moet ten minste %d kB groot zijn (om ruimte voor een kop te hebben)tar-archiefkop gedeeltelijk gelezengeslaagd
+plakkenpad mag geen regeleinden bevattengelieve --no-rename expliciet te vermelden. In versie 1.20.x wordt --rename de standaardvoor-vereistenprobleem - %.250s wordt niet geïnstalleerdprioriteitprioriteit valt buiten het bereikprioriteit moet een geheel getal zijnprioriteit van %s valt buiten het bereik: %sprioriteit van %s: %svierstatusveld (foreign/allowed/same/no) '%s': %sleesfout in %.250sleesfout in '%.250s'leesfout in configuratiebestand '%.255s'leesfout op standaardinvoerleesfout op stdin bij de prompt i.v.m. configuratiebestander wordt gelezen uit bestand '%.255s' met pakketinformatieer wordt gelezen uit bestand '%s' met pakketinformatie: %sstatusmodificatie-bestand '%.250s' wordt gelezenpakketbestand opnieuw samengesteldbetreffende %s dat %s bevat, voor-vereistenprobleem:
+%sbetreffende %s dat %s bevat:
+%sverwijderen van %.250sarchitectuur '%s' die momenteel door de database gebruikt wordt, wordt verwijderdhandmatig geselecteerd alternatief wordt verwijderd - %s wordt omgezet naar automatische modushernoemen impliceert overschrijven van '%s' met
+  ander bestand '%s'; niet toegelatenhernoemen: verwijder oude dubbele link '%s'koppeling %s wordt hernoemd van %s%s naar %s%sslaafkoppeling %s wordt hernoemd van %s%s naar %s%sdeze bewerking kan alleen uitgevoerd worden door de systeembeheerderlees- en schrijftoegang tot de dpkg-databasemap %s is vereistschrijftoegang tot databasemap '%s' van dpkg is vereist voor een grote bijwerking van beschikbare pakkettenhet revisienummer is leegcommando rm om op te schonenhoofd- of lege map wordt genoemd als een configuratiebestand in veld '%s'er werd gezocht, maar er zijn geen pakketten gevonden (bestanden die overeenkomen met *.deb)tweede woord (error) in het veld '%s': %s<onbekend>automatische keuze van %s wordt ingesteldmeerdere keren het item pakketinformatie gevonden, slechts eenmaal toegestaanshell-opdracht om bestanden te verplaatsenpakketlijst wordt getoond met pagineringsprogrammasla het aanmaken van %s over omdat het eraan gekoppelde bestand %s (van koppelingsgroep %s) niet bestaatslaafbestandslaafkoppeling %sslaafkoppeling is hetzelfde als de hoofdkoppeling %sslaafnaambronbestand '%.250s' is geen gewoon bestandopgesplitst pakket opnieuw samenstellenstatusmodificatie-bestand bevat een lege regelhet afsluitende regeleinde ontbreekt in het statusmodificatie-bestandstatusstatuslogger/ op het einde wordt weggehaaldsubproces %s gaf een foutwaarde %d terugde grootte van de symbolische koppeling '%.250s' ging van %jd naar %zdsyntaxisfout in bestand '%.250s' met triggers voor bestandensyntaxisfout in het statusmodificatie-bestandsyntaxisfout in bestand '%.250s' met uitgestelde triggers bij regel %d teken %zd '%s'verwacht slechts een argument, de naam van de triggerdoel is een map - kan controle van controlebestand niet overslaaner zijn meerdere versies van deel %d - ten minste '%.250s' en '%.250s'er is geen script in de nieuwe versie van het pakket - er wordt opgegevenderde woord (status) in het veld '%s': %sdit is een beschermd pakket - het mag niet verwijderd wordendit is een essentieel pakket - het mag niet verwijderd wordenom automatische opwaarderingen weer in te schakelen kunt u '%s --auto %s' gebruiken.te weinig waarden in veld '%s' met de archiefdetails (vergeleken met andere)te veel fouten; er wordt gestoptte veel geneste fouten tijdens foutherstelte veel waarden in veld '%s' met de archiefdetails (vergeleken met andere)'%.250s' bevat een te lange regel of het regeleinde ontbreekthoofdmap %s voor het doorlopen van de boomstructuur is geen mapbestand '%.250s' met triggeraangelegenheden bevat een syntaxisfout; ongeldige pakketnaam '%.250s': %.250striggernaam '%s' is niet geldig: %striggernaam bevat een ongeldig tekentriggerregister bestaat nog nietgetriggerdci-triggerbestand '%.250s' bevat een niet-geldige triggersyntaxis in triggernaam '%.250s': %.250sci-triggerbestand bevat de onbekende richtlijn '%.250s'ci-triggerbestand bevat een richtlijn in een onbekende syntaxisgegevensmap voor triggers nog niet aangemaakttriggersdatabankvergrendelingeindeloze triggerlus; afgebrokenscript uit het nieuwe pakket wordt geprobeerd als alternatief...poging tot overschrijven van '%.250s', wat ook in pakket %.250s %.250s zitpoging tot overschrijven van '%.250s', wat de omgeleide versie is van '%.250s'poging tot overschrijven van '%.250s', wat de omgeleide versie is van '%.250s' (pakket: %.100s)poging tot overschrijven van map '%.250s' in pakket %.250s %.250s met iets dat geen map ispoging tot overschrijven van gedeelde '%.250s', dat verschilt van andere exemplaren van pakket %.250stwee commando's opgegeven: --%s en --%skan invoer-onderdelenbestand '%.250s' niet (opnieuw) openenkan de databasemap '%s' van dpkg niet benaderen voor een grote bijwerking van beschikbare pakkettenkan dpkg-databasemap %s niet benaderenkan de eigenaar van doelbestand '%.250s' niet veranderenkan het bestaan van '%.250s' niet verifiërenkan de vergrendelingsstatus van bestand '%s' niet nagaankan het bestaan van het archief '%.250s' niet verifiërenkan het vergrendelingsbestand voor de dpkg-databasemap %s niet controlerenkan de eigenaar van de reservekoppeling voor '%.255s' niet wijzigenkan de rommel rond '%.255s' niet opruimen alvorens een nieuwe versie te installerenkan bestand '%s' niet sluitenkan nieuw bestand `%.250s' niet sluitenkan nieuw bestand '%.250s' met uitgestelde triggers niet sluitenkan de nieuwe status van '%.250s' niet afsluitenkan '%.255s' niet aanmakenkan '%.255s' niet aanmaken (bij het verwerken van '%.255s')kan bestand '%s' niet aanmakenkan nieuw bestand '%.250s' niet aanmakenaanmaken van een tijdelijke map is misluktkan triggerstatusmap '%.250s' niet aanmakenkan controle-infobestand '%.250s' niet verwijderenkan de oude map '%.250s' niet verwijderen: %skan opgebruikt depotbestand '%.250s' niet verwijderenkan '%.250s' niet wegdoen%s (%s) kan niet uitgevoerd wordenkan %.250s niet opvullen met vulselkan %.250s niet doorspoelen na opvullingkan bestand '%s' niet doorspoelenkan nieuw bestand '%.250s' niet doorspoelenkan de nieuwe status van '%.250s' niet doorspoelenkan status van bronbestand niet bepalen met fstatkan de nieuwe status van '%.250s' niet synchroniserenkan bestandsindicator voor map '%s' niet verkrijgenkan signaal %s niet negeren alvorens %.250s uit te voerenkan '%.250s' niet installeren als '%.250s'kan (waarschijnlijk) nieuwe infobestand '%.250s' niet installerenkan nieuw infobestand '%.250s' niet installeren als '%.250s'kan nieuw bestand '%.250s' met uitgestelde triggers niet installerenkan de nieuwe versie van '%.255s' niet installerenkan de nieuwe status van '%.250s' niet installerenkan %s niet vergrendelenkan geen reservekoppeling van '%.255s' maken alvorens een nieuwe versie te installerenkan geen reservekoppeling maken voor '%.255s'kan '%.255s' niet opzij zetten om een nieuwe versie te installerenkan '%.255s' niet openenkan map '%s' niet openenkan bestand '%s' niet openenkan nieuw depotbestand '%.250s' niet openenkan uitvoerbestand '%.250s' niet openenkan bronbestand '%.250s' niet openenkan tijdelijke controlemap niet openenkan ci-triggerbestand '%.250s' niet openenkan bestand '%.250s' met uitgestelde triggers niet openenkan het dpkg-databasevergrendelingsbestand voor map %s niet openen/aanmakenkan de frontend-vergrendeling voor map %s niet openen/aanmakenkan nieuw bestand '%.250s' met uitgestelde triggers niet openen/aanmakenkan vergrendelingsbestand '%.250s' voor triggers niet openen/aanmakenkan tijdsaanduiding '%.255s' niet ontledenkan depotmap '%.250s' niet lezenkan bestand '%.250s' met triggers voor bestanden niet lezenkan de opties van de bestandsindicator voor %.250s niet lezenkan koppeling '%.255s' niet lezenkan koppeling '%s%.255s' niet lezenkan deelbestand '%.250s' niet lezenkan '%s' niet verwijderenkan de reservekopie van '%.250s' niet verwijderenkan gekopieerd bronbestand '%s' niet verwijderenkan de pas uitgepakte versie van '%.250s' niet verwijderenkan de pas geïnstalleerde versie van '%.250s' niet verwijderenkan de pas geïnstalleerde versie van '%.250s' niet verwijderen om de reservekopie opnieuw te laten installerenkan verouderd infobestand '%.250s' niet verwijderenkan nieuw depotbestand niet hernoemen van '%.250s' naar '%.250s'kan deelbestand '%.250s' niet opnieuw openenkan de reservekopie-versie van '%.250s' niet terugzettenkan '%.250s' niet veilig verwijderenkan '%.255s' niet op een veilige manier verwijderenkan het oude bestand '%.250s' niet veilig verwijderen: %skan niet naar het begin van %.250s gaan na opvullingkan geen buffer instellen op databasebestand %skan de optie close-on-exec voor %.250s niet instellenkan '%.250s' niet uitvoerbaar makenkan de modus van het doelbestand '%.250s' niet instellenkan de omgevingsvariabelen voor het pakketbeheerdersscript niet instellen met setenvkan setenv niet instellen voor subproceskan de status van %s '%.250s' niet opvragenkan de status van %s '%.250s' niet opvragen: %skan status van '%.250s' niet opvragenkan de status van '%.255s' niet opvragen (dat net geïnstalleerd zou worden)kan status van controlemap niet opvragenkan de status van het momenteel geïnstalleerde configuratiebestand '%.250s' niet opvragenkan de status van het pas gedistribueerde configuratiebestand '%.250s' niet opvragenkan van het andere nieuwe bestand '%.250s' niet de status opvragenkan de status van de teruggezette '%.255s' niet opvragen alvorens een nieuwe versie te installerenkan status van bronbestand '%.250s' niet opvragenkan status van bestand '%.250s' met uitgestelde triggers niet opvragenkan map '%s' niet synchroniserenkan bestand '%.255s' niet synchroniserenkan bestand '%s' niet synchroniserenkan nieuw bestand '%.250s' niet synchroniserenkan niet afkappen voor de nieuwe status van '%.250s'kan %s niet ontgrendelenkan het bestand '%s' niet wegschrijvenkan nieuw bestand '%.250s' niet wegschrijvenkan niet schrijven naar nieuw bestand '%.250s' met uitgestelde triggerskan niet schrijven naar statusbestandsindicator %dkan de nieuwe status van '%.250s' niet wegschrijvenaanhalingstekens niet gesloten in '%s'onverwachte fout van bzip2onverwachte gegevens na pakket en selectie op regel %donverwacht bestandseinde na pakketnaam op regel %donverwacht bestandseinde voor regeleinde %donverwacht bestandseinde in %s op %.255sonverwacht bestandseinde in pakketnaam op regel %donverwacht einde van bestand of stroomonverwacht bestandseinde in '%.250s'onverwacht bestandseinde bij het proberen lezen van %sonverwacht invoereindeonverwacht regeleinde na pakketnaam op regel %donverwacht regeleinde in pakketnaam op regel %donverwacht regeleinde in het statusmodificatie-bestandonverwachte reeds bestaande padnaam %sonbekend argument '%s'onbekende compressiestrategieonbekende compressiestrategie '%s'!onbekend compressietype `%s'!onbekend deb-formaat-versienummer: %sonbekende force/refuse optie '%.*s'onbekende optie '%s'onbekende optie -%conbekende optie --%sonbekende systeemgroep '%s' in het statusmodificatie-bestand; de
+systeemgroep werd voor de modificatie verwijderd. Dit is
+hoogstwaarschijnlijk een verpakkingsbug. Om de zaak te herstellen kunt u de modificatie handmatig verwijderen met %sonbekende systeemgebruiker '%s' in het statusmodificatie-bestand; de
+systeemgebruiker werd voor de modificatie verwijderd. Dit is
+hoogstwaarschijnlijk een verpakkingsbug. Om de zaak te herstellen kunt u
+de modificatie handmatig verwijderen met %sonbekend tar-archiefkoptype '%c'onbekend uitvoerformaat '%s' voor verifyonbekende gewenst-status op regel %d: %.250suitgepakt maar niet geconfigureerdonherstelbare fatale fout; er wordt gestoptniet-ondersteund GNU tar-archiefkoptype '%c'niet-ondersteund PAX tar-archiefkoptype '%c'niet-ondersteund Solaris tar-archiefkoptype '%c'voorinstelling van onbekend compressietypeniet-ondersteund compressietype '%s' met een uniforme compressieonbekende opties in bestandskoponbekend type integriteitstoetsde map met bijwerkingen bevat bestand `%.250s' met een te lange naam (lengte=%d, max=%d)de map met bijwerkingen bevat bestanden met namen van verschillende lengte (zowel %d als %d)alternatief %s wordt bijgewerkt omdat koppelingsgroep %s gewijzigde slaafkoppelingen bevatgebruiker '%s' bestaat nietdoor gebruiker gedefinieerde veldnaam '%.*s' is te kort%s wordt gebruikt om in de automatische modus in %s (%s) te voorzien.%s wordt gebruikt om in de handmatige modus in %s (%s) te voorzien.waarde voor veld '%s' heeft een regel die niet begint met een spatie '%c'waarde voor veld '%s' heeft een verkeerd opgemaakte regel '%.*s'waarde voor veld '%s' is niet toegestaan in deze contextverificatie van pakket %s is mislukt!verificatie van pakket %s is mislukt, maar wordt zoals gevraagd toch geïnstalleerd.<geen>versie %.250s van %.250s is reeds geïnstalleerd; wordt overgeslagenversie '%s' heeft verkeerde syntaxisversie '%s' heeft verkeerde syntaxis: %sversienummer begint niet met een cijferhet versienummer is leegde tekenreeks met het versienummer bevat spatieshet versienummer is een lege tekenreeksProvides met versienummerwachten op subproces %s is misluktwachten op subproces %s is misluktwaarschuwingtijdens het lezen van %s: %stijdens verwijderen van %.250s blijkt map '%.250s' niet leeg en wordt dus niet verwijderdtijdens verwijderen van %.250s kan de map '%.250s' niet verwijderd worden: %s - zou deze map een aanhechtingspunt zijn?zal %.250s niet degraderen van %.250s naar %.250s; wordt overgeslagenwoord in het veld '%s': %sja, de configuratie van %s (defect gemaakt door %s) wordt afgebouwdja, zal %s verwijderen ten gunste van %su heeft niet de benodigde rechten om de dpkg-databasemap %s te vergrendelenu dient pakketten bij hun eigen naam op te geven, en dus niet met de naam van het bestand waarin ze zitten
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/nn.gmo dpkg-1.20.7.1/po/nn.gmo
--- dpkg-1.20.7.1-orig/po/nn.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/nn.gmo	2021-06-09 18:25:15.460504201 -0500
@@ -0,0 +1,158 @@
+���{��a�=+&i.��.�� 4<q5�-�.�1 $R4w/���)9*.d'�&�3�5LR_-tH�Q�A=ef�7L<�B� 6W5p1�#�K�5H -~ !� � 5� !,6!.c!.�!�!H�!6*"(a">�"�"�"�"�"*#20#-c#/�#]�#$G$$8l$,�$�$(�$:% U%-v%�%��%�o&�J'�(�(��( g),�)�)�)�)�)6�)!*;*%Z*�*%�*"�*&�*+*+;A+3}+�+A�+,&/,"V,,y,"�,5�,,�,G,-t-*�-"�-�-�--.)3.].|.)�.�.�.!�.!/=/%Z/%�/�/�/�/ �/#0+:0%f0$�0�0 �0�0:1<1X1u1$�1�1�1�12202!P2r25�2 �2%�230.3*_3+�3)�34�344;J4<�4:�47�4065;g5?�5$�5A6$J6!o6:�6<�6	7'7	=7"G7Oj78�7*�7868L8"i84�8
�8 �8%�8G9?^9#�97�92�9Y-:4�:F�:1;;5;Dq;�;&�;-�;<.&<U<)j<�<&�<�<0�<6"=4Y=%�=%�=+�=4>F;>@�>+�>%�>1?+G?Ns?*�?�?+@,3@`@"{@*�@�@*�@&A37A4kA)�A,�AD�A*<B4gB&�B#�B#�B%C'1C.YC�C!�C4�C[�C,XD4�D#�D,�D+E-7EeE�E2�EB�E1F*@F6kF&�F4�F1�F0G"OGrG�G(�G�GS�GM2H(�H"�H�H�H`�H�MIa�J@OK)�K0�K�K1�K,L(KL5tL�L-�L/�L+$M-PM#~M5�M+�M
+NN7*N=bN2�N/�N0O74OFlO�O�O�O-�OLP_QPD�Po�P�fQ=�Q>-R?lR�R�R'�RS,#S/PS(�SO�S0�S-*T(XT�T/�T�T,�T*U.BU#qUC�U7�U'V49VnVvV�V	�V%�V7�V.�V(,WSUW�Wf�W=X'SX%{X-�X5�X)Y?/YoY��Y�EZ�'[�\"�\��\&g]B�]�]�]�]�]:^$F^-k^9�^0�^#_+(_)T_~_�_Y�_D`#\`=�`(�`4�`$a,Aa"naO�a,�aKb#Zb"~b�b�b2�b<�b55c#kc�c+�c'�c(�c+'d-Sd'�d1�d,�d%e.e%He#ne,�eA�e,f,.f[f'uf�fB�f*�f'g)Gg+qg�g�g&�g&�g)%h4Oh8�h"�h5�h'i+>i$ji8�i2�i/�i-+j>Yj<�jO�jR%k:xk>�k9�kJ,lHwl'�lM�l%6m\m?{m<�m�m&n
+2n$=nYbnN�n*o6oToko#�o@�o�o)p**pUUpK�p,�pA$q1fqZ�q5�qL)r8vrH�rE�r>s)Os6ys	�s/�s�s"�st/:tjt-�t4�t:�t( u+Iu*uu=�uJ�u?)v-iv'�v/�vB�vZ2w2�w �w7�w6xPxox3�x,�x9�x1)yF[yD�y0�y7z[PzA�z?�z..{#]{'�{3�{+�{/	|#9|$]|9�|m�|;*}Nf}-�}6�}7~.R~�~�~2�~M�~713i+�"�5�1"� T�'u�����)���Z�L^�3��#߁�	�O%���<���v������	����FN� B�R��_�b�O�;��ga���������](��!z��&il$�3:��P��}1�^�ynu��,hq���xf����Gp��c�C�YZU/7�r�>��������A��[�.��{�4�������
+'#�\�I�9m�Ms@D0E��
+���
W���	d�SVk��|�8���K�
Q)��6�o`�5t��*%�wHj�L�TX��-�2?�+J���e����=�����~�"��
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+ %d in %s:  %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+'%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs a .deb filename argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix; however:
+Authenticating %s ...
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NamePackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want Processing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Updating available packages info, using %s.
+Version[default=N][default=Y][no default]archive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerbroken due to postinst failurecan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)couldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdone
+duplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror opening conffiles fileerror reading %.250serror reading conffiles fileerror reading from dpkg-deb pipeerror setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to stderr, discovered before conffile promptfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfield name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+files '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefork failedillegal package name at line %d: %.250sinstalledinvalid integer for --%s: '%.250s'maintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemay not be empty stringneed an action optionnewline in field name '%.*s'no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentspackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage name has characters that aren't lowercase alphanums or '-+.'part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepassed
+pre-dependency problem - not installing %.250sread error in %.250sread error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package filerequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedsource file '%.250s' not a plain filestatoverride file contains empty linesubprocess %s returned error exit status %dtarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upunable to (re)open input part file '%.250s'unable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close updated status of '%.250s'unable to create '%.255s'unable to delete control info file '%.250s'unable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to read depot directory '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to stat %s '%.250s'unable to stat '%.250s'unable to stat current installed conffile '%.250s'unable to stat restored '%.255s' before installing another versionunable to truncate for updated status of '%.250s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown compression type '%s'!unknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywarningyou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:51+0200
+Last-Translator: Håvard Korsvoll <korsvoll@skulelinux.no>
+Language-Team: Norwegian Nynorsk <i18n-nn@lister.ping.uio.no>
+Language: nn
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+X-Generator: KBabel 1.10
+
+Oppsettsfila «%s» finst ikkje på systemet.
+Installerer ny oppsettsfil sidan du ønskjer det.
+     Versjonen i pakken er den same som ved siste installasjon.
+     ikkje ei vanleg fil          %.255s
+  %.250s (versjon %.250s) vil verta installert.
+%.250s er %s.
+  %.250s er installert, men versjonen er %.250s.
+  %.250s er ikkje installert.
+  Oppsettet av %.250s vil verta fjerna.
+  %.250s skal installerast, men versjonen er %.250s.
+  %.250s vil verta fjerna.
+  %.250s er pakka ut, men er aldri sett opp.
+  %.250s er pakka ut, men versjonen er %.250s.
+  %.250s siste oppsette versjon er %.250s.
+  %.250s tilbyr %.250s og skal installerast.
+  %.250s tilbyr %.250s, men er %s.
+  %.250s tilbyr %.250s, men oppsettet skal fjernast.
+  %.250s tilbyr %.250s, men skal fjernast.
+ %d i %s:  %s (ikkje ei vanleg fil)
+ ==> Tek vare på den gamle oppsettsfila som standard.
+ ==> Pakkedistributøren har gjeve ut ein oppdatert versjon.
+ ==> Brukar den gamle fila sidan du ønskjer det.
+ ==> Brukar den nye oppsettsfila som standard.
+ ==> Brukar den nye fila sidan du ønskjer det.
+ Standardhandlinga er å installera den nye versjonen.
+ Standardhandlinga er å ta vare på den versjonen som er installert.
+ og  krev %s (underprosess): %s
+«%s»-felt, ugyldig pakkenamn «%.255s»: %s«%s»-felt, manglande pakkenamn eller rot der det skulle vera eit pakkenamn«%s»-felt, referanse til «%.255s»:
+ «%c» er forelda, bruk «%c=» eller «%c%c» i staden«%s»-felt, referanse til «%.255s»:
+ ugyldig versjonsforhold %c%c«%s»-felt, referanse til «%.255s»:
+ implisitt nøyaktig treff med versjonsnummer, føreslår «=» i staden«%s»-felt, referanse til «%.255s»:
+ versjonsverdien startar med eit ikkje-alfanumerisk teikn, føreslår å leggja til eit mellomrom«%s»-felt, referanse til «%.255s»: versjon ikkje avslutta«%s»-felt, syntaksfeil etter referanse til pakken «%.255s»(Legg merke til at %s er forsvunnen, og fullstendig erstatta.)
+(Les database ... (inga skildring tilgjengeleg)valet -%c skal ikkje ha nokon parametervalet -%c treng ein parameter--%s --pending tek ingen ikkje-valparametrar--%s --recursive treng minst éin stigparameter--%s krev eit .deb-filnamn som parameter--%s krev ein målkatalog.
+Kan det henda du meinte å bruka «dpkg --install»?--%s treng minst éi pakkearkivfil som parameter--%s treng minst eitt pakkenamn som parametervalet --%s skal ikkje ha nokon parametervalet --%s treng ein parameter--%s tek høgst to parametrar (.deb og katalog)--%s tek ingen parametrar--%s tek berre éin parameter (.deb-filnamn)--auto krev nøyaktig éin delfilparameter--auto krev at du brukar alternativet --output--compare-versions ugyldig relasjon--compare-versions tek tre argument: <versjon> <relasjon> <versjon>--search krev minst eitt filnamnsmønster som parameter--split krev ei kjeldefil som parameter--split tek høgst eitt kjeldefilnamn og målprefiks. Men:
+Godkjenner %s ...
+Sletta %s.
+SkildringDet oppstod feil ved behandlinga av:
+Fila «%.250s» er ikkje ein del av eit oppdelt arkiv.
+Installerer ny versjon av oppsettsfila %s ...
+Bosfiler som ligg att i depotkatalogen:
+Fleire kopiar av pakken %s er pakka ut i denne
+ omgangen. Set berre opp éin gong.
+NamnPakken %s er halden tilbake, og vert ikkje rørt. Bruk --force-hold for å tvinga gjennom behandling.
+Pakken %s er nemnt fleire gonger, behandlar berre éin gong.
+Pakken «%s» inneheld ingen filer (!)
+Pakkar som ikkje er sette saman att:
+Del %d av pakken %s er lagra (ønskjer endå Behandlinga vart stoppa på grunn av for mange feil.
+Teke vare på informasjon om %s frå %s.
+Byter ut informasjon om tilgjengelege pakkar, ved hjelp av %s.
+Set opp %s (%s) ...
+Dei følgjande pakkane er i uorden grunna alvorlege problem under
+installasjonen. Dei må installerast på nytt for at dei (og eventuelle pakkar
+som er avhengige av dei) skal verka skikkeleg:
+Dei følgjande pakkane er berre halvvegs oppsette, sannsynlegvis fordi
+det oppstod problem første gongen dei vart sette opp. Pakkane bør setjast
+opp på nytt med «dpkg --configure <pakke>» eller oppsettsmenyen i dselect.
+Dei følgjande pakkane er berre halvvegs installerte, fordi det oppstod
+problem under installasjonen. Installasjonen kan sannsynlegvis gjennomførast
+ved å prøva på nytt. Pakkane kan fjernast med dselect eller «dpkg --remove»:
+Dei følgjande pakkane er pakka ut, men er ikkje sette opp enno.
+Dei må setjast opp med «dpkg --configure» eller frå oppsettsmenyen
+i dselect for at dei skal verka:
+Skriv «exit» når du er ferdig.
+Skriv «dpkg-deb --help» for hjelp med endring av *.deb-filer.
+Skriv «dpkg --help» for hjelp med å installera og avinstallera pakkar.Skriv «dpkg-split --help» for hjelp.Oppdaterer opplysningar om tilgjengelege pakkar, ved hjelp av %s.
+Versjon[standard=N][standard=Y][inga standardhandling]arkivet inneheldt objektet «%.255s» med ukjend type 0x%xarkivet manglar linjeskift i hovudetøydelagd på grunn av etterinstallasjonsfeilklarte ikkje køyra «mmap» på pakkeinfofila «%.255s»klarte ikkje fjerna gammalt etterfjerningsskriptfinn ikkje pakkeinfofila «%.255s»klarte ikkje opna «%.255s» (i «%.255s»)klarte ikkje opna arkivdelfila «%.250s»klarte ikkje lesa infokatalogenklarte ikkje fjerna «%.250s»klarte ikkje fjerna den gamle sikringskopien av oppsettsfila «%.250s» (frå «%.250s»)klarte ikkje fjerna den gamle oppsettsfila «%.250s» (= «%.250s»)klarte ikkje fjerna gammal fillistekan ikkje oppfylla førkrav for %.250s (ønskt grunna %.250s)klarte ikkje skanna katalogen «%.255s»klarte ikkje skanna oppdateringskatalogen «%.255s»fann ikkje «%.255s» (i «%.255s»)oppsettsfila «%.250s» finst ikkje i pakkenfinn ikkje oppsettsfila «%.250s»omdirigeringar i konflikt med kvarandre, involverer «%.250s» eller «%.250s»pakkar i konflikt - installerer ikkje %.250skontrollkatalogen har feil tilgangsløyve %03lo (må vera >=0755 og <=0775)klarte ikkje opna «%i» for straumkravproblem - set ikkje opp pakkenkravproblem - fjernar ikkjeferdig
+verdien for feltet «%s» finst meir enn éin gongdet brukardefinerte feltet «%.*s» finst meir enn éin gongtom streng frå «fgets» ved lesing av oppsettsfilerepoken i versjonen er ikkje eit talfeil ved lukking av %.250sfeil ved lukking av oppsettsfila «%.255s»feil ved lukking/skriving av «%.255s»feil ved oppretting av eining «%.255s»feil ved oppretting av katalogen «%.255s»feil ved oppretting av hard lenkje «%.255s»feil ved oppretting av røyr «%.255s»feil ved oppretting av symbolsk lenkje «%.255s»klarte ikkje sikra at «%.250s» ikkje finstfeil ved opning av «conffiles»-filafeil ved lesing av %.250sfeil ved lesing av «conffiles»-filafeil ved lesing frå dpkg-deb-røyrfeil ved setjing av eigarskap for «%.255s»feil ved setjing av eigarskap for den symbolske lenkja «%.255s»feil ved setjing av filrettar for «%.255s»feil ved setjing av tidsmerke for «%.255s»feil ved opning av %.250sfeil ved blokkering av signalet %s: %s
+feil ved skriving av «%s»feil ved skriving til standardfeil, oppdaga før oppsettsfilpromptklarte ikkje skifta katalog til «%.255s»klarte ikkje skifta til katalogklarte ikkje skifta filrot til «%.250s»klarte ikkje lukka etter lesing: «%.255s»klarte ikkje oppretta katalogklarte ikkje oppretta røyrklarte ikkje utføra «dup» for fd %dklarte ikkje utføra «dup» for std%sklarte ikkje køyra «fstat» på arkivetklarte ikkje utføra «fstat» på omdirigeringsfilaklarte ikkje utføra «fstat» på «statoverride»-filaklarte ikkje opna omdirigeringsfilklarte ikkje opna pakkeinfofila «%.255s» for lesingklarte ikkje opna «statoverride»-filaklarte ikkje lesa «%.255s» (i «%.255s»)klarte ikkje lesa arkivet «%.255s»klarte ikkje fjerna den innlemma oppdateringsfila %.255sklarte ikkje fjerna mi eiga oppdateringsfil %.255sfeltnamnet «%.*s» skal følgjast av eit kolonfila «%.250s» er øydelagd - %.250s manglarfila «%.250s» er øydelagd - ugyldig MD5-sjekksum «%.250s»fila «%.250s» er øydelagd - ugyldig siffer (kode %d) i %sfila «%.250s» er øydelagd - ugyldig magisk nummer sist i det første hovudetfila «%.250s» er øydelagd - ugyldig magisk nummer til slutt i det andre hovudetfila «%.250s» er øydelagd - ugyldig fyllteikn (kode %d)fila «%.250s» er øydelagd - manglar linjeskift etter %.250sfila «%.250s» er øydelagd - nullar i informasjonsdelenfila «%.250s» er øydelagd - den andre medlemmen er ikkje ein datamedlemfila «%.250s» er øydelagd - feil storleik i forhold til opplysninganefila «%.250s» er øydelagd - for kortfila «%.250s» er øydelagd - feil tal på delar i forhold til opplysninganefila «%.250s» er ikkje ein arkivdelfila «%s» er ingen arkivdel
+filene «%.250s» og «%.250s» høyrer ikkje til den same filafillistefila for pakken «%.250s» inneheld eit tomt filnamngafling mislukkastugyldig pakkenamn på linje %d: %.250sinstallertugyldig heiltal for --%s: «%.250s»vedlikehaldarskriptet «%.50s» har feil tilgangsløyve %03lo (må vera >=0555 og <=0775)vedlikehaldarskriptet «%.50s» er verken ei rein fil eller ei symbolsk lenkjefinn ikkje vedlikehaldarskriptet «%.50s»kan ikkje vera ein tom strengtreng eit handlingsvallinjeskift i feltnamn «%.*s»ingen pakkeinformasjon i «%.255s»ingen pakke med namnet «%s» er installert, kan ikkje setja oppikkje installertikkje installert, men oppsettet ligg inneingenting etter kolonet i versjonsnummeretden gamle versjonen av pakken har eit altfor langt filnamn som startar på «%.250s»opning av komponenten «%.255s» (i %.255s) mislukkast på ein uventa måteikkje nok minne til ny oppryddingsoppføringikkje nok minne til ny oppryddingsoppføring med mange parametrarpakken %.250s er installert og sett opp frå førpakken %.250s er ikkje klar for oppsett
+ kan ikkje setja opp (noverande status «%.250s»)pakkearkitekturen (%s) passar ikkje til systemet (%s)pakken inneheld eit altfor langt informasjonsfilnamn (startar med «%.50s»)pakkekontrollinformasjonen inneheld katalogen «%.250s»pakkekontrollinformasjon, rmdir av «%.250s» sa ikkje «ingen katalog»pakkenamnet har teikn som verken er små bokstavar, tal eller «-+.»delen %d manglardelfila «%.250s» er ikkje ei vanleg fildelen er altfor stor eller storleiken er ikkje positivgodkjent
+problem med førkrav - installerer ikkje %.250slesefeil i %.250slesefeil i oppsettsfila «%.255s»lesefeil frå standard-innlesefeil på standard-inn ved oppsettsfilpromptpakkefil sett saman attden ønskte handlinga krev superbrukartilgangsøkte, men fann ingen pakkar (filer med namn *.deb)fann fleire pakkeinformasjonsoppføringar, kan berre ha eikjeldefila «%.250s» er inga vanleg fil«statoverride»-fila inneheld ei tom linjeunderprosessen %s returnerte feilstatus %dmålet er ein katalog - kan ikkje hoppa over kontrollfilsjekkdet finst fleire versjonar av delen %d - iallfall «%.250s» og «%.250s»det finst ingen skript i den nye versjonen av pakken - gjev oppklarte ikkje (gjen)opna inndelfila «%.250s»klarte ikkje sjekka om «%.250s» finstklarte ikkje sjekka om arkivet «%.250s» finstklarte ikkje endra eigarskapen til den symbolske lenkja «%.255s»klarte ikkje rydda opp i rotet rundt «%.255s» før ein annan versjon skulle installerastklarte ikkje lukka oppdatert status for «%.250s»klarte ikkje oppretta «%.255s»klarte ikkje sletta kontrollinformasjonsfila «%.250s»klarte ikkje sletta den oppbrukte depotfila «%.250s»klarte ikkje sletta «%.250s»klarte ikkje etterfylla %.250sklarte ikkje tømma oppdatert status for «%.250s»klarte ikkje køyra «fstat» på kjeldefilaklarte ikkje synkronisera oppdatert status for «%.250s»klarte ikkje installera «%.250s» som «%.250s»klarte ikkje installera den (visstnok) nye informasjonsfila «%.250s»klarte ikkje installera ny informasjonsfil «%.250s» som «%.250s»klarte ikkje installera ny versjon av «%.255s»klarte ikkje installera oppdatert status for «%.250s»klarte ikkje laga sikringskopi av lenkja «%.255s» før ein ny versjon skulle installerastklarte ikkje laga sikringskopi av den symbolske lenkja «%.255s»klarte ikkje flytta «%.255s» for å installera ein ny versjonklarte ikkje opna den nye depotfila «%.250s»klarte ikkje opna utfila «%.250s»klarte ikkje opna kjeldefila «%.250s»klarte ikkje opna den mellombelse kontrollkatalogenklarte ikkje lesa depotkatalogen «%.250s»klarte ikkje lesa fildeskriptorflagg for %.250sklarte ikkje lesa lenkja «%.255s»klarte ikkje lesa delfila «%.250s»klarte ikkje fjerna den nyutpakka versjonen av «%.250s»klarte ikkje fjerna den nyinstallerte versjonen av «%.250s» for å kunna installera sikringskopien på nyttklarte ikkje fjerna den forelda informasjonsfila «%.250s»klarte ikkje endra namnet på den nye depotfila frå «%.250s» til «%.250s»klarte ikkje opna delfila «%.250s» på nyttklarte ikkje gjenoppretta sikringskopien av «%.250s»klarte ikkje setja flagget «close-on-exec» for %.250sklarte ikkje setja køyreløyve på «%.250s»finn ikkje %s «%.250s»fann ikkje «%.250s»fann ikkje den installerte oppsettsfila «%.250s»fann ikkje gjenoppretta «%.255s» før ein annan versjon skulle installerastklarte ikkje klippa for oppdatert status for «%.250s»klarte ikkje skriva oppdatert status for «%.250s»uventa data etter pakke og val på linje %duventa slutt på fil i %s i %.255suventa slutt på linje etter pakkenamnet på linje %duventa slutt på linje i pakkenamnet på linje %dukjend komprimeringstype «%s»!ukjend tvingings-/avvisingsval «%.*s»ukjent val -%cukjent val --%sukjend ønskt status på linje %d: %.250spakka ut, men ikkje sett oppoppdateringskatalogen inneheld fila «%.250s», som har for langt namn (lengd=%d, maks=%d)oppdateringskatalogen inneheld filer med ulike namnelengder (både %d og %d)det brukardefinerte feltnamnet «%.*s» er for kortversjonsstrengen inneheld mellomromversjonsstrengen er tomåtvaringdu må gi sjølve namnet på pakkane, ikkje namna på filene som pakkane ligg i
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/pa.gmo dpkg-1.20.7.1/po/pa.gmo
--- dpkg-1.20.7.1-orig/po/pa.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/pa.gmo	2021-06-09 18:25:15.492504249 -0500
@@ -0,0 +1,95 @@
+��B,Y<�&�.��4$Y1u$�$��!1S_3w5����&8Qg]�	3�	
+
+-)
+W
+8\
+,�
+�
+�
+$�
+&2>Yp������(;Xs	�
� ����

+/
[
q
�
�
��
&*UQ�3�I�/<gl<�L?^;�C�:7pry�]iI�;�
+3g>&�t�BY�i	���I�O�JC$����b�6;Zr��5,7Vd3�S�.C?rB�<�2&RQy ��Q(VQe�$7 \!}�$>)@+	%2<?&.6'/5 !A#:1B,8=
+-;4(039
"7*     not a plain file          %.255s
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is not installed.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Version of %s on system is %s.
+ %d in %s:  %s (not a plain file)
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on (Reading database ... (no description available)--%s needs <name>--%s needs <name> <path>; however:
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Debian %s version %s.
+Debian '%s' package management program version %s.
+Deleted %s.
+DescriptionInstalling new version of config file %s ...
+NamePackage %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Setting up %s (%s) ...
+Usage: %s [<option> ...] <command>
+
+Version[default=N][default=Y]cannot read info directorycannot remove '%.250s'cannot remove old files listdone
+duplicate path %sduplicate value for '%s' fielderror closing %.250serror opening conffiles fileerror reading %.250serror reading conffiles fileerror writing '%s'failed to chdir to directoryfailed to create directoryfilename "%s" is not absoluteinstallednot installednot installed but configs remainpart %d is missingpassed
+priority must be an integerread error in %.250sreassembled package fileunable to delete control info file '%.250s'unknown argument '%s'unknown option -%cunknown option --%swarningProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:51+0200
+Last-Translator: A S Alam <apbrar@gmail.com>
+Language-Team: Punjabi <punjabi-users@lists.sf.net>
+Language: pa
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: KBabel 1.11.4
+Plural-Forms: nplurals=2; plural=(n != 1);
+     not a plain file          %.255s
+  %.250s (ਵਰਜਨ %.250s) ਇੰਸਟਾਲ ਕੀਤਾ ਜਾਵੇਗਾ।
+  %.250s %s ਹੈ।
+  %.250s ਇੰਸਟਾਲ ਨਹੀਂ ਹੈ।
+  %.250s ਇੰਸਟਾਲ ਹੈ, ਪਰ ਵਰਜਨ %.250s ਹੈ।
+  %.250s ਹਟਾਇਆ ਜਾਵੇਗਾ।
+  %.250s %.250s ਦਿੰਦਾ ਹੈ ਅਤੇ ਇੰਸਟਾਲ ਕੀਤਾ ਜਾਵੇਗਾ।
+  %.250s %.250s ਦਿੰਦਾ ਹੈ, ਪਰ %s ਹੈ।
+  ਪੈਕੇਜ %s ਹਾਲੇ ਸੰਰਚਿਤ ਨਹੀਂ ਹੈ।
+  ਪੈਕੇਜ %s ਇੰਸਟਾਲ ਨਹੀਂ ਹੈ।
+  ਪੈਕੇਜ %s ਹਟਾਇਆ ਜਾਵੇਗਾ।
+  %s ਦਾ ਸਿਸਟਮ ਉੱਤੇ %s ਵਰਜਨ ਹੈ।
+ %2$s %1$d ਵਿੱਚ: %s (ਇੱਕ ਸਧਾਰਨ ਫਾਇਲ ਨਹੀਂ)
+ ਨਵੇਂ ਵਰਜਨ ਨੂੰ ਇੰਸਟਾਲ ਕਰਨ ਲਈ ਮੂਲ ਕਾਰਵਾਈ ਹੈ।
+ ਤੁਹਾਡੇ ਮੌਜੂਦਾ ਵਰਜਨ ਨੂੰ ਰੱਖਣ ਲਈ ਮੂਲ ਕਾਰਵਾਈ ਹੈ।
+ ਅਤੇ  ਨਿਰਭਰ ਹੈ (ਡਾਟਾਬੇਸ ਪੜ੍ਹਿਆ ਜਾ ਰਿਹਾ ਹੈ ... (ਕੋਈ ਵੇਰਵਾ ਉਪਲੱਬਧ ਨਹੀਂ)--%s needs <name>--%s needs <name> <path>; ਪਰ:
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+ਡੇਬੀਅਨ %s ਵਰਜਨ %s
+ਡੇਬੀਅਨ `%s' ਪੈਕੇਜ ਮੈਨਜੇਮਿੰਟ ਪਰੋਗਰਾਮ ਵਰਜਨ %s ਹੈ।
+%s ਹਟਾਇਆ।
+ਵੇਰਵਾਸੰਰਚਨਾ ਫਾਇਲ %s ਦਾ ਨਵਾਂ ਵਰਜਨ ਇੰਸਟਾਲ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ...
+ਨਾਂਪੈਕੇਜ %s ਇੱਕ ਤੋਂ ਵੱਧ ਵਾਰ ਵੇਖਾਇਆ ਗਿਆ ਹੈ, ਪਰ ਕਾਰਵਾਈ ਅਧੀਨ ਇੱਕ ਵਾਰ ਹੀ ਆਏਗਾ।
+ਪੈਕੇਜ `%s' 'ਚ ਕੋਈ ਫਾਇਲ ਨਹੀਂ ਹੈ (!)
+ਪੈਕੇਜ ਹਾਲੇ ਮੁੜ-ਜੋੜਿਆ ਨਹੀਂ ਗਿਆ:
+%s (%s) ਸੈੱਟਅੱਪ ਕੀਤਾ ਜਾ ਰਿਹਾ ਹੈ ...
+Usage: %s [<option> ...] <command>
+
+ਵਰਜਨ[default=N][default=Y]ਜਾਣਕਾਰੀ ਡਾਇਰੈਕਟਰੀ ਪੜ੍ਹੀ ਨਹੀਂ ਜਾ ਸਕਦੀ`%.250s' ਹਟਾਈ ਨਹੀਂ ਜਾ ਸਕਦੀਪੁਰਾਣੀ ਫਾਇਲ ਸੂਚੀ ਹਟਾਈ ਨਹੀਂ ਜਾ ਸਕਦੀਮੁਕੰਮਲ
+ਦੁਹਰਾ ਮਾਰਗ %s`%s' ਖੇਤਰ ਦਾ ਦੂਹਰਾ ਮੁੱਲ%.250s ਬੰਦ ਕਰਨ 'ਚ ਗਲਤੀconffiles ਫਾਇਲ ਅਪਵਾਦ ਖੋਲ੍ਹਣ ਦੌਰਾਨ ਗਲਤੀ%.250s ਪੜ੍ਹਨ ਦੌਰਾਨ ਗਲਤੀconffiles ਫਾਇਲ ਅਪਵਾਦ ਪੜ੍ਹਨ ਦੌਰਾਨ ਗਲਤੀ`%s' ਲਿਖਣ ਦੌਰਾਨ ਗਲਤੀਡਾਇਰੈਕਟਰੀ ਬਦਲਣ ਲਈ ਫੇਲ੍ਹਡਾਇਰੈਕਟਰੀ ਬਣਾਉਣ ਲਈ ਫੇਲ੍ਹਫਾਇਲ ਨਾਂ "%s" ਪੂਰਾ ਨਹੀਂ ਹੈਇੰਸਟਾਲ ਹੋਇਆਇੰਸਟਾਲ ਨਹੀਂ ਹੈਇੰਸਟਾਲ ਨਹੀਂ ਹੈ, ਪਰ ਸੰਰਚਨਾ ਰਹੇਗੀ%d ਭਾਗ ਗੁੰਮ ਹੈਪਾਸ ਹੋਇਆ
+ਤਰਜੀਹ ਇੱਕ ਪੂਰਨ ਅੰਕ ਹੀ ਚਾਹੀਦਾ ਹੈ%.250s ਪੜ੍ਹਨ 'ਚ ਗਲਤੀਪੈਕੇਜ ਫਾਇਲ ਮੁੜ-ਜੋੜਿਆ ਜਾ ਰਿਹਾ ਹੈਕੰਟਰੋਲ ਫਾਇਲ ਜਾਣਕਾਰੀ `%.250s' ਹਟਾਉਣ ਲਈ ਅਸਫ਼ਲਲਾਜ਼ਮੀ ਮੁੱਲ `%s'ਅਣਜਾਣੀ ਚੋਣ -%cਅਣਜਾਣੀ ਚੋਣ --%sਚੇਤਾਵਨੀ
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/pl.gmo dpkg-1.20.7.1/po/pl.gmo
--- dpkg-1.20.7.1-orig/po/pl.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/pl.gmo	2021-06-09 18:25:15.551504339 -0500
@@ -0,0 +1,805 @@
+��� w<AW?WaYWk�W�'X��X&pY=�Y&�Y�Y-[.>[m[.~[�[ �[4�[\5;\-q\.�\0�\1�\$1]4V]/�]�]q�](E^$n^�^�^:�^6_1E_1w_!�_2�_(�_'`7`!Q`s`�`�`�`.�`�`SaXaia�a9�am�a)Hb:rb9�b.�b'c&>cec3{c5�c�c�cP�c\Idv�d[eUye�e�e�effZ&f�f�f��fmg=�g�g�g-�g+hDh)bh�h�h��h=�jR�j1kDOkL�kA�k'#l&Kl(rl'�l+�l4�l!$m,Fm9sm-�m�m#�mn$<nan"~n�n!�n#�noo-oAoVo"vo2�o1�o/�o'.pVp.mp�p-�pR�pH8qQ�qA�qerf{rI�r7,s<ds�s(�sB�s t7tRt
et st�t5�t1�t@u0Vu�u�u#�u!�u�uvK2v7~v5�v-�vw!4wVw'pw-�w-�w �w5xKx kx�x"�x!�x"�x!y$.y,Sy.�y.�y.�y
zH-z6vz(�z>�z${ :{[{z{�{�{��{N|[|#r|:�|-�}�}~!~3~*@~<k~#�~-�~-�~�(��5���[
��i��d�g �
������(ǋ-���8:�<s�.��ߌ0��3'�1[����������0v�1��*َJ�2O����&'�2N�E��VǑ�57�.m�-��+ʒ/��
&�%4�/Z�*��&��!ܓ+��B*�]m�˔!ДM�@�2V�����5�!͘"��41�.f�5��3˝��G�8W�,����(ܞ�
+��G8���3��)��$�:�,G�Vt� ˠ�*�3�I�&X�3�-��+�?
�,M�	z�����*��ݢ� �H1�z�����R�g�jm��إ���4��5���������u+�&��AȪ{
+�!��,��*ի.�/��N��ҭ V�5w��� Į,�$�.7�>f�*��;Я,�L9�>���Ű�x�3�;R���u����"��� �9-�(g�X��3�?�8]�2��1ɵ,��:(�4c�5��4ζA�ME�-����շ#��0�E�Y� p�1��%ø8�?"�"b�B��6ȹ��&�.B�!q�!��5�����3�G�\�	o�9y�.��#�,�3�$R�w���%��ܼ%��!�-<�1j�����)ѽ1��:-�?h�&��Ͼ=�7*�b�!|�.��*Ϳ#���"+�&N�u�0����:���&�@=�+~�;��3���7�AR���&��-��#�0,�;]�0��(��?��)3�-]���"������4��E"�h���,��"��!���$+�5P� ��8������-�5<�,r�B��B��+%�GQ�$�� ��:��;�3V�=������&���73�k�D��c��2�2>�*q�"��3��:��-.�&\���������"��
+�W!�y�(�=��*��J�\�"n�������-���)�%I�#o�@��@��'�=�C�]�z���������)���-�!L�!n�#����%��%��'�,E�r�����*��'��'�B�!W�y� ��-��#��#	�+-�%Y�$��� �������%�";�:^���F�����3�$P�u�������#�����!2�"T�:w���5�� �2(�[�%j���0��*��$�/1�a�6p�V��"��(!�J�<Z�.��)��(��*�+D�p�,��)��4��3�2L�4�;��<��6-�:d�7��@��0�;I�?��$��A��=,�>j�$��0��!��!�b<���c��!�:?�<z�=��_��HU���������)��)$�+N�+z����$a������\$�&��&��'�� ��7�tP�2��-��'&�4N�.��)��G��-$�R�	i�s�k��/��.�=�>R�%��$��#��&�!'�I�!h�"��^��@�M�i�����%��+��7�!;�*]�(�����������.�O=�8��*������#�3/�c�{�7��5���|�
+����m��00�Ga���)��!���+�D�3a�$��5��%���-�"A�4d���!��C��=�%[�
�� ��(����%��7�T�Il�.��6��!�>�U�Gn�P��G�.O�?~�#��7��#�>�+^�2��Y��f�L~�M��&�K@�3��=�����=:�x�4��(��F��12�;d�&�������%�.E�.t�a��e� k��� ��D��?��?�^�u���&��-��7��(�0�6�TT�.��������"9La)x�&�"�"	",O6h��7�BHK&�0��6S$e4���O�
+I
+T_
+%��%�*�
!/+D7p+�!�M�$D4iF�@�6&1]�,�,�#R' z'�$�	�Z�4M	2�	'�	�	.�	D(
+Gm
+Y�
+Q^a%�+�2%E%k1�+�N�>
!X
3z
*�
�
5�
)"D$g2�+�+�,D_"y$��!�*�(*D0o0�&�3�4,5a)�,��D*E4p���&�##?%c(�.�9�"'>*f.��!��((>4g4�[�,-4Z#�,�"�"/&/V+�+�-�*&7!^��� �2�0&&WB~#�.�2O h1���!�3?*_��6�4�,'&T1{ �'�.�%4=1r+�#��
+"'Ji"����!�(1#Mq:�"�#�S Mf E� � (!(<!*e!.�!0�!"�!I"]"4l"�"�"(�"#"#A#Y#l#�#�#�#B�#`$9i$'�$#�$`�$�P%I''qq'��'�w(�W))�)E
*&S* z*+�+>�+,2,!L,1n,C�,*�,@-0P-,�-1�-A�-'".FJ.?�.�.��./r/-�/$�/-�/A#0Be06�0?�0!19A1){1�1)�1+�12$/2T2k20~2
+�2t�2/3,B3o3D�3y�3>M4H�4:�4<5AM58�5�5:�5;6X6_6Zl6j�6�27�8Q�8�89$9?9T9bf9�9�9��9�:G�:5;L;;Y;%�;�;,�;<<�+<K&>hr>D�>R ?Ns?>�?6@58@6n@5�@=�@8A$RA1wA2�A6�A$B*8B#cB)�B#�B)�B"�B&"C(ICrC�C�C�C,�C?�CR>DG�D/�D*	E4E;IE+�E.�Ec�EYDFq�FEGVGy�GTPHA�H=�H#%I4IID~I�I�I�IJ*#J"NJDqJK�JEK;HK�K+�K$�K%�K$L*4LT_LJ�LE�L,EM(rM+�M#�ME�MM1N8N0�NH�N02O1cO%�O:�O5�O8,P&eP6�P8�P3�P70Q$hQ'�QQ�Q8R0@R_qR$�R5�R8,SeS
lSzS��S
+T9T5QTN�T3�U 
+V+VBVYV=iVC�VC�V=/W>mW��W<XIX8]X�Xc�Y=Z�?^�a"�b
+�c�d,�d4+e%`eN�eT�e<*f"gf;�f=�fCgHgWgpg+ugK�hE�h+3iV_i?�i��i(�k=l`Il��l)EmLom6�m8�m0,n?]n�n4�n?�n0$o.Uo(�o-�oE�oz!p�p)�pj�p7qKVq��q�es1u*Qy(|y4�y*�y2z?8zxz_�zM�z+>{"j{5�{	�{�{/�{\|	k|Du|1�|,�|N};h}q�}~6~/S~�~�~&�~=�~B3XF�/��&
+�#1�7U�&��%��#ڀq��p��w��_�t�w����<�;[�����~��`��>�-�O ��p�&G�5n�A��9�. ��O��2�7Ŏ9��#7�,[�E��'ΏH��f?�F��[�LI�S��L��7����!ѓ4�(��/����)��͕ܕ�O	�2Y�^��F�T2�S��EۗE!�9g�S��F��7<�Dt�N��Q�/Z�����&��$���
+�)"�?L�/��<��H��'B�Qj�5��$�/�1G�5y�'��Cם�;�W�p�����	��LȞ9�#O�=s�3��$�
+�-)�JW�*��J͠�<7�?t���+С,��4)�F^�T��/��&*�KQ�B���/��7.�<f�9��ݤ*��, �"M�@p���Jɥ,�A�L^�.��OڦH*�(s�&��[ç(�0H�>y�=��F��W=�<��0ҩO�1S�:����/ݪ$
�(2�@[�D��!��?�;X�2��0Ǭ#��7�+T�S��ԭ�4�-E�3s�V��C��,B�Fo�%�� ܯ@��I>�:��Eð	�#�34�-h�N��.�O�kd�
вG޲>&�3e�J��W�=<�;z���Ѵ���1!�S�_n�εAֵN�2g�Y����1�#=�a��@��޷U�'E�"m�>��8ϸ=�F�!L�"n�'��&������5�&Q�)x�&��)ɺ1�$%�7J���7��4׻!�-.�+\�/��,��+��&'�+N�(z�=��-�*�D:�'�8���%��&"�I�d�w�"��C����Z�(o�(��3�����1�+M�+y�3��"��3��,0�,]�C��.��S��-Q�P���*��&�5<�/r�6��L��&�9B�}|�4��:/�j�L��6��=�9E�9�/��#��4
�.B�8q�H��<��80�Ti�R��=�2O�C��Q��B�G[�J��,��K�Ng�G��*��D)�'n���f��,�}G�#��D��:.�Ci�[��`	�"j�9������7��71�=i�=�����2���������;g�,��/��/�N0���;�<?�/|�C��7��:(�oc�>���
&�!4�sV�T���2�LK�+��%��$��&� 6�%W�,}�.��z��NT�"��#��"��
�/ �0P�D��7��2��)1�[�u���������P��JC�:��2����	��G0�(x�#��L��@�(S��|�"�,:��g�8�S9�'��'��1���-�!F�?h�2��C��+�K�b�%r�@��/��0	�]:�X��7��)�5;�/q�&��*��H��<�ZU�F��O��.G�#v���Y��`�bo�:��V
�Dd�R��&��)#�-M�6{�h��r�T��^��9B�N|�=��E	�O�"m�G����F��#4�WX�3��J��,/�\�%v� ��/��3��3!�OU�i��.�
>�*L�Lw�V���7�(L�u�0��7��K��>�N�1T�J��I��	�%�B�#^�������.��+��B"�3e�3��(����:�)M�w�A��H��Q�5d�2������B�
+G�'R�Iz�*��?��Z/�����=����3� 4�'U�6}�������%��E�6a�$��W��3�HI�M��D��2%�LX�!��6��<��4;�rp�-��)/;kpJ�N;=�#�.�K<gL�a�YS!�B�;)N0x1�N�c*�*�B�2O>m#�*�*�7&.^1�4��"-AP!�,�=�-	9M	8�	:�	/�	=+
+Ki
+F�
+.�
+6+be|?�@"c"��3�0�1)
6[
C�
;�
L/_/�8�8�)1,[�,�9�87Any?�F(,o.�(�(�:EX7�4�08<Gu6�%�)"D.gD�@�/bL7�@�)(*R&}1�1�")AAk$�1�$:@8{2�)�7*I-t5��8�700h,���"�:"Z}��)�2�",8!e;�(�.�^Lz[�#BA?�:�0�60*gS��?�- #M $q � .� *� !.!.M!|!�!]�!o�!^n"D�")#S<#.S�1��=�)��qQP�������"SiL��
+�Mw�-B-mO���+�l�K��[�L��'�J"�H4_�� �y��[!K����K%z��<��J�����_�}���V�/kJ ���8��;
���G��U�%�������]v��8�\"AK�.n������/`	fe����7"��4�����+����c~�#����R����JL����M������1��'�d�Y1����ApX|��^9�Xs�u\��cY�������T����#t�	���m���g�|d��?Q�Z��)z@$<�h���8���f�COi�l>D�{��@�x6j�����+k��eBv~��)j������m��a�b�����*�G-�<V���@��\������&���h��F��i��t=~'��S�7(���������*
+������n�e�c��	�a9�wR�G����a�3dE��!c2�A
+����(�D�w�2��ux��f9Y�Hy�	$�
� ���v�p#w^,��0���H������
+2��3Q����sO���NP����n��IU8��n��P�Z���[4���o�����||@Wh5����I/�Iy��9�]Z<��pA��:����D&�>��rr�����4�g��>�jLz��$]��;�t+�d���0��DM�{5�����:��/��������WmW�}7^(�y��X�:\��EF��5����26��C�]VX��{�7�,q1�`�i���?�%���$M����G�z�������Tg[�s��kC�?�S�l}��
k3O��Rv�!IE��	��
+`�'�N�C0B�:�b��-�����
�{q#���T�s���
�0�����3��>���������*�rN;�YoUE�}j�!�`�tF,6gR)pF�r�l����o��f���V�.?6=_�u��e��P5B_~��N�&��=x; b��q���^�(�.�U���Z�b������*���,��H�&h�u��T�xo��%�a�WQ
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on  new Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd bytes.
+ old Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd, main archive=%jd.
+%d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not a regular file%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s subprocess failed with wait status code %d%s subprocess returned error exit status %d%s subprocess was interrupted%s subprocess was killed by signal (%s)%s%s suggests %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%.255s' is not a Debian format archive'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one <archname> argument--%s takes one <pkgname> argument--%s takes one <trigname> argument--%s takes one <version> argument--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Authentication is required to run update-alternativesCommands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s, --status [<package>...]      Display package status details.
+  -p, --print-avail [<package>...] Display available version details.
+  -L, --listfiles <package>...     List files 'owned' by package(s).
+  -l, --list [<pattern>...]        List packages concisely.
+  -W, --show [<pattern>...]        Show information on package(s).
+  -S, --search <pattern>...        Find package(s) owning file(s).
+      --control-list <package>     Print the package control file list.
+      --control-show <package> <file>
+                                   Show the package control file.
+  -c, --control-path <package> [<file>]
+                                   Print path for package control file.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not chroot into maintainer script environmentDo not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Options:
+  -v, --verbose                    Enable verbose output.
+  -D, --debug                      Enable debugging output.
+      --showformat=<format>        Use alternative format for --show.
+      --deb-format=<format>        Select archive format.
+                                     Allowed values: 0.939000, 2.0 (default).
+      --nocheck                    Suppress control file check (build bad
+                                     packages).
+      --root-owner-group           Forces the owner and groups to root.
+      --[no-]uniform-compression   Use the compression params on all members.
+  -z#                              Set the compression level when building.
+  -Z<type>                         Set the compression type used when building.
+                                     Allowed types: gzip, xz, none.
+  -S<strategy>                     Set the compression strategy when building.
+                                     Allowed values: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Run update-alternatives to modify system alternative selectionsSelecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use dpkg --contents (= dpkg-deb --contents) to list archive files contents.
+Use dpkg --info (= dpkg-deb --info) to examine archive files.
+Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenUseful environment variables:
+Validatable things: pkgname, archname, trigname, version.
+
+VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchitecture name '%s' is invalid: %sarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' is not a regular filearchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurebuilding an unknown package in '%s'.building package '%s' in '%s'.can't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot access archive '%s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open %scannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open directory '%s'cannot open security status notification channelcannot read %scannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set primary group ID to rootcannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot stat pathname '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile file contains an empty lineconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file '%s' for package '%s' is missing valuecontrol file '%s' for package '%s' is missing value separatorcontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+diverting file '%s' from an Essential package with rename is dangerous, use --no-renamedone
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is emptyepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while cleaning uperror while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not a Debian binary archive (try dpkg-split?)file '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentformat version with too big major componentformat version with too big minor componentfound unknown packages; this might mean the available database
+is outdated, and needs to be updated through a frontend method;
+please see the FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>generated corrupt ar header for '%s'group '%s' does not existheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalled %s package %s scriptinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal errorinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slaveloading control file '%s' for package '%s'loading files list file for package '%s'local diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnew %s package %s scriptnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no 'control' file in control archive!no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete compression type '%s'; use xz insteadobsolete compression type '%s'; use xz or gzip insteadobsolete force/refuse option '%s'obsolete option '--%s'old %s package %s scriptold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoutside error context, abortingoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package architecture is missing or emptypackage contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name '%s' is invalid: %spackage name has characters that aren't lowercase alphanums or '-+.'package not in status nor available database at line %d: %.250spackage signature verificationpackage version numberpager to show filepart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinesplease specify --no-rename explicitly, the default will change to --rename in 1.20.xpre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerevision number is emptyrm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesshowing package list on pagerskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filesyntax error in triggers deferred file '%.250s' at line %d character %zd '%s'takes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo many nested errors during error recoverytoo-long line or missing newline in '%.250s'treewalk root %s is not a directorytrigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name '%s' is invalid: %strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to parse timestamp '%.255s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunexpected pre-existing pathname %sunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunrecoverable fatal error, abortingunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion '%s' has bad syntax: %sversion number does not start with digitversion number is emptyversion string has embedded spacesversion string is emptyversioned Provideswait for %s subprocess failedwait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.19.1
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2018-09-26 22:42+0200
+Last-Translator: Łukasz Dulny <BartekChom@poczta.onet.pl>
+Language-Team: Polish <debian-l10n-polish@lists.debian.org>
+Language: pl
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;
+X-Generator: Lokalize 2.0
+
+ zaplanowanych wyzwalaczy, które są lub mogą być nierozwiązywalne:
+
+Plik konfiguracyjny "%s" nie istnieje w systemie.
+Instalowanie nowego pliku konfiguracyjnego według żądania.
+
+Opcje debugowania mogą być łączone przy użyciu operatorów bitowych.
+Uwaga: znaczenie i wartości opcji mogą się zmienić w przyszłości.
+
+Proszę użyć "dpkg", aby zainstalować lub usunąć pakiety z systemu lub
+"apt" lub "aptitude", aby wygodnie zarządzać pakietami. Pakiety
+rozpakowane poleceniem "dpkg-deb --extract" nie będą poprawnie zainstalowane!
+
+OSTRZEŻENIE - użycie opcji oznaczonych [!] może poważnie uszkodzić system.
+Opcje wymuszania oznaczone [*] są domyślnie włączone.
+     Niezmodyfikowany po zainstalowaniu.
+     Wersja w pakiecie jest taka sama jak przy ostatniej instalacji.
+     nie jest plikiem          %.255s
+   Należy wybrać jedno z pośród wymienionych poniżej działań:
+    Y lub I  : zainstalowanie wersji opiekuna pakietu
+    N lub O  : zachowanie bieżącej wersji
+      D      : pokazanie różnic pomiędzy wersjami pliku
+      Z      : uruchomienie powłoki w celu zbadania sytuacji
+  %.250s (wersja %.250s) jest obecny i %s.
+  %.250s (wersja %.250s) jest przeznaczony do zainstalowania.
+  %.250s jest %s.
+  %.250s jest zainstalowany, ale w wersji %.250s.
+  %.250s nie jest zainstalowany.
+  %.250s jest przeznaczony do zdekonfigurowania.
+  %.250s jest przeznaczony do zainstalowania, ale w wersji %.250s.
+  %.250s jest przeznaczony do usunięcia.
+  %.250s jest rozpakowany, ale nie był jeszcze skonfigurowany.
+  %.250s jest rozpakowany, ale w wersji %.250s.
+  %.250s ma skonfigurowaną wersję %.250s.
+  %.250s dostarcza %.250s i jest obecny oraz %s.
+  %.250s dostarcza %.250s i jest przeznaczony do zainstalowania.
+  %.250s dostarcza %.250s ale jest %s.
+  %.250s dostarcza %.250s ale jest przeznaczony do zdekonfigurowania.
+  %.250s dostarcza %.250s ale jest przeznaczony do usunięcia.
+  %s (%s) dostarcza %s.
+  -?, --help                      Pokazuje ten ekran pomocy.
+      --version                   Pokazuje informacje o wersji programu.
+
+  Pakiet %s czeka na przetwarzanie wyzwalaczy.
+  Pakiet %s nie jest jeszcze skonfigurowany.
+  Pakiet %s nie jest zainstalowany.
+  Pakiet %s jest przeznaczony do usunięcia.
+  Pakiet %s dostarczający %s czeka na przetwarzanie wyzwalaczy.
+  Pakiet %s dostarcza %s, ale nie został jeszcze skonfigurowany.
+  Pakiet %s dostarczający %s nie jest zainstalowany.
+  Pakiet %s dostarcza %s, ale jest przeznaczony do usunięcia.
+  Wersją %s w systemie jest %s.
+  Wersją %s w systemie, dostarczaną przez %s, jest %s.
+  Wersją %s do skonfigurowania jest %s.
+  dowiązanie %s jest %snajlepszą wersją dowiązania jest "%s".  najlepsza wersja dowiązania niedostępna  obecnie brak dowiązania  dowiązanie obecnie wskazuje na %s podrzędne %s jest %s podrzędne %s: %s %7jd bajtów, %5d linii   %c  %-20.127s %.127s
+ %d w %s:  %d pakiet, z następującej sekcji: %d pakiety, z następujących sekcji: %d pakietów, z następujących sekcji: %s (%jd bajtów)
+ %s (%s) narusza zależności %s i jest %s.
+ %s (nie jest pustym plikiem)
+ ==> Usunięty (przez administratora lub skrypt) po zainstalowaniu.
+ ==> Plik w systemie utworzony przez administratora lub skrypt.
+ ==> Plik w pakiecie dostarczony przez opiekuna pakietu.
+ ==> Domyślnie zostanie zachowany stary plik konfiguracyjny.
+ ==> Zmodyfikowany (przez administratora lub skrypt) po zainstalowaniu.
+ ==> Twórca pakietu zamieścił zaktualizowaną wersję.
+ ==> Wykorzystany zostanie aktualny plik według żądania.
+ ==> Domyślnie zostanie zainstalowany nowy plik konfiguracyjny.
+ ==> Wykorzystany zostanie nowy plik według żądania.
+ Pakiet %s: część(i)  Domyślnym działaniem jest zainstalowanie nowej wersji.
+ Domyślnym działaniem jest zachowanie bieżącej wersji.
+ oraz  zależy od  nowy pakiet Debiana, wersja %d.%d.
+ rozmiar %jd bajtów: archiwum kontrolne=%jd bajtów.
+ stary pakiet Debiana, wersja %d.%d.
+ rozmiar %jd bajtów: archiwum kontrolne=%jd, archiwum z danymi=%jd.
+%d oczekiwany program nieznaleziony w PATH lub niebędący wykonywalnym
+%s%d oczekiwane programy nieznalezione w PATH lub niebędące wykonywalnymi
+%s%d oczekiwanych programów nieznalezionych w PATH lub niebędących wykonywalnymi
+%s%d plik lub katalog obecnie zainstalowany.)
+%d pliki i katalogi obecnie zainstalowane.)
+%d plików i katalogów obecnie zainstalowanych.)
+Brak %d pliku kontrolnegoBrak %d plików kontrolnychBrak %d plików kontrolnych%s (podproces): %s
+%s - priorytet %d%s narusza zależności %s%s w konflikcie z %s%s uszkodzone: %s%s opcja debugowania, --debug=<not-ósemk> lub -D<not-ósemk>:
+
+ Numer   Odn. do źródła   Opis
+%s wymaga %s%s rozszerza %s%s wymuszanie opcji - kontrola zachowania w przypadku wykrycia błędów:
+  ostrzeż, ale kontynuuj: --force-<opcja>,<opcja>,...
+  zatrz. w razie błędu:   --refuse-<opcja>,<opcja>,... | --no-force-<opcja>,...
+ Opcje do wymuszenia:
+%s nie jest zwykłym plikiem%s nie jest poprawnie zainstalowany - ignorowanie zależności od niego%s wymaga wstępnie %s%s poleca %spodproces %s zgłosił błąd poprzez kod %d funkcji "wait"podproces %s zwrócił kod błędu %dpodproces %s został przerwanypodproces %s został zabity sygnałem (%s)%s%s sugeruje %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Wersja formatu części:          %d.%d
+    Część pakietu:                  %s
+        ... wersja:                 %s
+        ... architektura            %s
+        ... skrót MD5:              %s
+        ... długość:                %jd bajtów
+        ... podzielony co:          %jd bajtów
+    Numer części:                   %d/%d
+    Długość części:                 %jd bajtów
+    Offset części:                  %jd bajtów
+    Rozmiar pliku części (użyta):   %jd bajtów
+
+%s: plik konfiguracyjny "%.250s" nie jest plikiem ani dowiązaniem (= "%s")%s: plik konfiguracyjny "%.250s" jest dowiązaniem do błędnego pliku
+ ("%s" jest dowiązaniem do "%s")%s: plik konfiguracyjny "%s" jest zapętlonym dowiązaniem
+ (= "%s")%s: problemy z zależnościami, lecz zostanie skonfigurowany według żądania:
+%s%s: problemy z zależnościami, przetwarzanie wyzwalaczy według żądania:
+%s%s: problemy z zależnościami, usuwanie według żądania:
+%s%s: błąd przekierowania wejścia do strumienia bzip2%s: błąd przekierowania wejścia do strumienia gzip%s: błąd przekierowania wyjścia do strumienia bzip2%s: błąd przekierowania wyjścia do strumienia gzip%s: nie można utworzyć dowiązania "%.250s" do "%.250s": %s%s: nie można usunąć "%.250s" (przed nadpisaniem): %s%s: nie można usunąć "%.250s": %s%s: nie można usunąć starej kopii "%.250s": %s%s: nie można usunąć starej wersji "%.250s": %s%s: nie można zmienić nazwy "%.250s" na "%.250s": %s%s: wewnętrzny błąd odczytu bzip2%s: wewnętrzny błąd odczytu bzip2: "%s"%s: wewnętrzny błąd zapisu bzip2%s: wewnętrzny błąd zapisu bzip2: "%s"%s: wewnętrzny błąd odczytu gzip%s: wewnętrzny błąd odczytu gzip: "%s"%s: wewnętrzny błąd zapisu gzip%s: wewnętrzny błąd zapisu gzip: %s%s: wewnętrzny błąd zapisu gzip: "%s"%s: błąd zamknięcia lzma%s: błąd lzma: %s%s: błąd odczytu lzma%s: błąd zapisu lzma%s: błąd przejścia podczas kopiowania: %s%s: nie można otworzyć %s dla sprawdzenia sumy kontrolnej: %s%s: nie można określić dowiązania do pliku konfiguracyjnego "%s"
+ (= "%s"): %s%s: nie można ustalić stanu pliku konfiguracyjnego "%s"
+ (= "%s"): %s"%.255s" nie zawiera pliku kontrolnego "%.255s""%.255s" nie jest plikiem archiwum Debiana"%s" koliduje z "%s""%s" zawiera zdefiniowany przez użytkownika Priorytet "%s"opcja "%s" nie przyjmuje żadnych wartościpole "%s", błędna nazwa pakietu "%.255s": %spole "%s", brak nazwy architektury lub śmieci w miejscu, gdzie spodziewano się nazwy architekturypole "%s", brak nazwy pakietu lub śmieci w miejscu, gdzie spodziewano się nazwy pakietupole "%s", w odniesieniu do "%.255s":
+ "%c" jest już niewykorzystywane, należy użyć w zamian "%c=" lub "%c%c"pole "%s", w odniesieniu do "%.255s":
+ zły numer wersji relacji %c%cpole "%s", w odniesieniu do "%.255s":
+ wykorzystany jest konkretny numer wersji przy porównywaniu, należy użyć w zamian "="pole "%s", w odniesieniu do "%.255s":
+ numer wersji nie rozpoczyna się od znaku alfanumerycznego, należy dodać spacjępole "%s", w odniesieniu do "%.255s": nieprawidłowa nazwa architektury "%.255s": %spole "%s", w odniesieniu do "%.255s": numer wersji niezakończonypole "%s", błąd składni po odniesieniu do pakietu "%.255s"opcja "%s" wymaga podania wartości"%s" nie odnaleziono w PATH lub nie jest wykonywalny(Stwierdzono zniknięcie %s, który został zupełnie zastąpiony.)
+(Odczytywanie bazy danych ... (brak dostępnego opisu)(w sumie %jd bajtów)
+, zrzut pamięciopcja -%c nie przyjmuje żadnych wartościopcja -%c wymaga podania wartości--%s --pending wymaga niepodawania argumentów nie będących opcją--%s --recursive wymaga co najmniej jednego argumentu będącego ścieżką--%s nie obsługuje (jeszcze) czytania .deb ze standardowego wejścia--%s wymaga podania argumentów nazwy pliku .deb i katalogu--%s wymaga <nazwy>--%s wymaga argumentów <nazwa> <ścieżka>--%s wymaga podania nazwy pliku .deb--%s wymaga <katalogu> jako argumentu--%s wymaga podania argumentu <plik>--%s wymaga podania pojedynczego argumentu--%s wymaga podania katalogu docelowego.
+Być może należy użyć "dpkg --install"?--%s wymaga podania poprawnej nazwy pakietu. "%.250s" jest niepoprawny: %s--%s wymaga co najmniej jednego argumentu będącego plikiem archiwum--%s wymaga co najmniej jednej nazwy pakietu--%s wymaga podania czterech argumentówopcja --%s nie przyjmuje żadnych wartościopcja --%s wymaga podania wartości--%s wymaga podania argumentu będącego dodatnią liczbą ósemkową--%s wymaga podania co najmniej jednego argumentu będącego plikiem części--%s wymaga podania najwyżej jednej nazwy pliku pakietu--%s wymaga podania najwyżej dwóch argumentów--%s wymaga podania co najwyżej dwóch argumentów (.deb oraz katalogu)--%s wymaga podania dokładnie jednego argumentu--%s wymaga podania dokładnie dwóch argumentów--%s nie wymaga podawania argumentów--%s wymaga podania jednego argumentu <nazwa-architektury>--%s wymaga podania jednego argumentu <nazwa-pakietu>--%s wymaga podania jednego argumentu <nazwa-wyzwalacza>--%s wymaga jednego argumentu <wersja>--%s wymaga podania jednej nazwy pakietu jako argument--%s wymaga podania jednego argumentu (nazwy pliku .deb)--%s uzyty z przestarzałym operatorem relacji "%s"--auto wymaga podania dokładnie jednego pliku części--auto wymaga użycia opcji --outputbłędna relacja dla --compare-versions--compare-versions wymaga podania trzech argumentów: <wersja> <relacja> <wersja>--search wymaga podania co najmniej jednego wzorca pliku--split wymaga podania nazwy pliku źródłowego--split wymaga podania co najwyżej nazwy pliku źródłowego i prefiksu dla plików docelowychpodano --update, ale %s nie istnieje--update jest bezużyteczne w połączeniu z --remove... najprawdopodobniej wywołanie skryptu powiodło się.../%s; jednakże:
+<kompresja> z tar -cf<deb> jest nazwą pliku w formacie archiwum Debiana.
+<plikkontr> jest nazwą pliku kontrolnego.
+<polekontr> jest nazwą pola głównego pliku "control".
+
+<dekompresja><dpkg-deb --info potok><dowiązanie> i <ścieżka> nie mogą być takie same<dowiązanie> wskazuje na %s/<nazwa>.
+  (np. /usr/bin/pager)
+<nazwa> jest główną nazwą danej grupy dowiązań.
+  (np. pager)
+<ścieżka> jest położeniem jednego z docelowych plików alternatyw.
+  (np. /usr/bin/less)
+<priorytet> jest liczbą całkowitą, opcja z większym numerem ma wyższy priorytet
+  w trybie automatycznym.
+
+<deskryptora pliku ze statusem i postępem pakietu><standardowe wyjście błędów><standardowe wejście><standardowe wyjście>Dodawanie "%s"
+Pozwalanie na instalację konfliktujących ze sobą pakietówNiezmieniona alternatywa %s, ponieważ wybór %s jest niedostępny.Instalowanie brakujących plików konfiguracyjnych za każdym razemUżywanie nowych plików konfiguracyjnych zawsze, bez pytaniaUżywanie starych plików konfiguracyjnych zawsze, bez pytaniaInny proces zablokował bazę danych do zapisu i może ją obecnie modyfikować,
+część następujących problemów może być tego skutkiem.
+ArchitekturaSprawdzanie %s ...
+Uruchomienie update-alternatives wymaga uwierzytelnieniaPolecenia:
+  --add <właściciel> <grupa> <tryb> <ścieżka>
+                               dodaje nowy wpis do bazy danych.
+  --remove <ścieżka>           usuwa plik z bazy danych.
+  --list [<wzorzec-globalny>]  wyświetla aktualne nadpisania z bazy danych.
+
+Polecenia:
+  --check-supported              Sprawdza, czy uruchomione dpkg obsługuje wyzwalacze.
+
+Polecenia:
+  --install <dowiązanie> <nazwa> <ścieżka> <priorytet>
+    [--slave <dowiązanie> <nazwa> <ścieżka>] ...
+                             dodaje grupę alternatyw do systemu.
+  --remove <nazwa> <ścieżka> usuwa <ścieżkę> z grupy alternatyw <nazwa>.
+  --remove-all <nazwa>       usuwa grupę <nazwa> z systemu alternatyw.
+  --auto <nazwa>             zmienia główne dowiązanie <nazwa> na tryb automat.
+  --display <nazwa>          wyświetla informację o grupie <nazwa>.
+  --query <nazwa>            parsowalna wersja --display <nazwa>.
+  --list <nazwa>             wyświetla wszystkie cele grupy <nazwa>.
+  --get-selections           wyświetla główne nazwy alternatyw i ich stan.
+  --set-selections           wyświetla stan alternatyw ze standardowego wejścia.
+  --config <nazwa>           pokazuje alternatywy grupy <nazwa> i pyta
+                             użytkownika, która ma być używana.
+  --set <nazwa> <ścieżka>    ustawia <ścieżkę> jako alternatywę dla <nazwy>.
+  --all                      wywołuje --config dla wszystkich alternatyw.
+
+Polecenia:
+  -s, --status [<pakiet>...]      Pokazuje szczegóły o stanie pakietu.
+  -p, --print-avail [<pakiet>...] Pokazuje szczegóły o dostępnej wersji.
+  -L, --listfiles [<pakiet>...]   Lista plików danego pakietu.
+  -l, --list [<wzorzec>...]       Zwięzła lista pakietów.
+  -W, --show [<wzorzec>...]       Pokazuje informacje o pakiecie.
+  -S, --search <wzorzec>...       Znajduje pakiet(y) zawierające plik(i).
+      --control-list <pakiet>     Wypisuje listę plików kontrolnych pakietu.
+      --control-show <pakiet> <plik>
+                                  Pokazuje plik kontrolny pakietu.
+  -c, --control-path <pakiet> [<plik>]
+                                  Pokazuje ścieżkę do pliku kontrolnego pakietu.
+
+Polecenia:
+  -s|--split <plik> [<prefiks>]  Podzielenie archiwum.
+  -j|--join <część> <część> ...  Połączenie części archiwum.
+  -I|--info <część> ...          Podanie informacji o części.
+  -a|--auto -o <komplet> <część> Automatyczne łączenie części.
+  -l|--listq                     Lista niepasujących części.
+  -d|--discard [<plik> ...]      Usunięcie niepasujących części.
+
+Polecenia:
+  [--add] <plik>               dodaje ominięcie.
+  --remove <plik>              usuwa ominięcie.
+  --list [<wzorzec-globalny>]  pokazuje ominięcia pliku.
+  --listpackage <plik>         pokazuje pakiet, który omija plik.
+  --truename <plik>            zwraca ominięty plik.
+
+Operatory porównania dla --compare-versions:
+ lt le eq ne ge gt       (brak wersji traktowany jako wcześniejsza);
+ lt-nl le-nl ge-nl gt-nl (brak wersji traktowany jako późniejsza);
+ < << <= = >= >> >       (dla zachow. kompatyb. ze składnią pliku kontroln.).
+
+Plik konfiguracyjny "%s"
+Plik konfiguracyjny "%s" (właściwie "%s")
+Konfigurowanie pakietów, które mogą pomóc danemuDekonfigurowanie pakietu %s (%s) ...
+Dekonfigurowanie pakietu %s (%s), tak żeby można było usunąć %s (%s) ...
+Wersja %2$s narzędzia %1$s do odpytywania programu zarządzania pakietami Debiana.
+Wersja %2$s narzędzia do wyzwalaczy, pakietu Debiana %1$s.
+Wersja %2$s pakietu Debiana %1$s.
+Debian "%s", program do zarządzania pakietami, wersja %s.
+Wersja %2$s programu do zarządzania pakietami Debiana %1$s.
+Debian "%s", program do dzielenia/łączenia pakietów, wersja %s.
+Usunięto %s.
+Zależności i konfliktyOpisWybór:U=nieznany/I=instalacja/R=usunięcie/P=wyczyszczenie/H=zatrzymanie
+| Stan:N=brak/I=zainstalowany/C=skonfigurowany/U=rozpakowany/
+|/  F=częśc. skonfigurowany/H=częśc. zainstalowany/W=wyzw. czek./T=wyzw. zapl.
+|| Błędy?=(brak)/R-do pon. inst. (duże litery w "Stan" i "Błędy"=problemy)
+Nie używaj chroot do przejścia do środowiska skryptu od opiekuna pakietuNieprzeprowadzanie bezpiecznych operacji we/wy podczas rozpakowywaniaWystąpiły błędy podczas przetwarzania:
+Status zakończenia:
+  0 = OK
+  1 = z --auto, plik nie jest częścią
+  2 = problemy
+Plik "%.250s" nie jest częścią archiwum wieloczęściowego.
+Składnia formatu:
+  Format jest ciągiem znaków, który będzie wypisany dla każdego pakietu.
+  Może zawierać standardowe sekwencje escape - \n (nowa linia),
+  \r (powrót karetki) lub (\\) (zwykły odwrotny ukośnik). Informacje
+  o pakietach mogą być załączone przez wstawienie odwołań do zmiennych,
+  używając składni ${var[;szerokość]}. Pola będą przesunięte do prawej
+  strony, chyba że zmienna szerokość jest ujemna, co spowoduje
+  przesunięcie do strony lewej.
+Z reguły pomocne informacje o postępieignorowanie żądania usunięcia dzielonego ominięcia "%s".
+Ignorowanie żądania zmiany nazwy pliku "%s", którego właścicielem jest omijany pakiet "%s"
+Informacje o %d pakiecie zostały zaktualizowane.
+Informacje o %d pakietach zostały zaktualizowane.
+Informacje o %d pakietach zostały zaktualizowane.
+Olbrzymia ilość nieistotnych informacjiInstalowanie pakietów nawet jeśli nie uda się sprawdzanie autentycznościInstalowanie nawet jeśli może to zepsuć inny pakietInstalowanie nowej wersji pliku konfiguracyjnego %s ...
+Wywoływanie i status skryptów opiekuna pakietuW katalogu części znajdują się pliki zawierające śmieci:
+Opuszczanie "%s"
+Dużo informacji na temat zależności i konfliktówDużo nieistotnych informacji na temat np. katalogów dpkg/infoDużo informacji o każdym pliku konfiguracyjnymDużo informacji o każdym przetworzonym plikuDużo informacji dotyczących wyzwalaczydosowy koniec pliku (^Z) w nazwie pola "%.*s"dosowy koniec pliku (^Z) w wartości pola "%.*s" (brak końca linii?)Rozpakowana została więcej niż jedna kopia pakietu %s
+ w tym przebiegu!  Konfiguracja odbędzie się tylko dla jednej.
+NazwaBrak ominięcia "%s", nic nie usunięto.
+Uwaga: Zmienna PATH dla konta administratora zawiera zwykle katalogi /usr/local/sbin, /usr/sbin oraz /sbinNie ma nic do skonfigurowania.Oferowanie zastąpienia plików konfiguracyjnych kiedy nie ma nowych wersjiOpcje:
+  --admindir=<katalog>           Użycie <katalogu> zamiast %s.
+  --by-package=<pakiet>          Wymuszenie pakietu oczekującego na wyzwalacz
+                                   (normalnie ustawiane przez dpkg).
+  --await                        Pakiet będzie czekać na przetwarzanie.
+  --no-await                     Pakiety nie będą czekać na przetwarzanie.
+  --no-act                       Tylko test - bez wykonywania żadnych zmian.
+
+Opcje:
+  --depotdir <katalog>           Użycie <katalogu> zamiast %s/%s.
+  -S|--partsize <rozmiar>        Rozmiar w KiB, dla -s (domyślnie jest 450)
+  -o|--output <plik>             Nazwa pliku, do -j (domyślnie:
+                                   <pakiet>_<wersja>_<architektura>.deb).
+  -Q|--npquiet                   Brak komunikatu, gdy -a nie jest częścią.
+  --msdos                        Tworzenie nazw plików w formacie 8.3.
+
+Opcje:
+  -v, --verbose              Włączenie wyjścia szczegółowego.
+  -D, --debug                Włączenie debuggera.
+      --showformat=<format>  Użycie podanego formatu dla --show.
+      --deb-format=<format>  Wybór formatu archiwum.
+                               Dozwolone wartości: 0.939000, 2.0 (domyślna).
+  --nocheck                  Pominięcie sprawdzania pliku kontrolnego (tworzenie
+                               niepoprawnych pakietów).
+      --root-owner-group           Wymusza użytkownika i grupę root.
+      --[no-]uniform-compression   Użyj parametrów kompresji dla wszystkich członów.
+  -z#                        Ustawienie stopnia kompresji dla budowanego pakietu.
+  -Z<typ>                    Ustawienie rodzaju kompresji podczas budowania.
+                               Dozwolone wartości: gzip, xz, none.
+  -S<strategia>              Ustawienie strategii kompresji w czasie budowania.
+                               Dozwolone wartości: none; extreme (xz);
+                               filtered, huffman, rle, fixed (gzip).
+
+Informacje o każdym pliku konfiguracyjnymInformacje o każdym przetworzonym plikuNadpisywanie ominiętego pliku wersją bez ominięćNadpisywanie plików jednego pakietu innymNadpisywanie katalogu danego pakietu innym plikiemPATH nie obejmuje ważnych programów, może stwarzać problemyPATH jest nie ustawionaPakiet %s jest wstrzymany i nie będzie przetwarzany. --force-hold wymusza jego przetworzenie.
+Pakiet %s jest wymieniony kilkukrotnie, ale zostanie przetworzony tylko raz.
+Pakiet "%s" nie zawiera żadnego pliku (!)
+Pakiety jeszcze nie przebudowane:
+Część %d pakietu %s odnaleziona (wciąż potrzeba Ścieżkapole Pre-DependsPrzygotowywanie do rozpakowania pakietu %s ...
+Proszę wcisnąć <enter>, aby pozostawić bieżący wybór[*]; albo wpisać wybrany numer: PriorytetPrzetwarzania pakietów nawet ze złą lub brakującą architekturąPrzetwarzanie pakietów, nawet ze złymi wersjamiPrzetwarzanie wyzwalaczy pakietu %s (%s)...
+Przetwarzanie zostało zatrzymane z powodu wystąpienia zbyt wielu błędów.
+Czyszczenie z plików konfiguracyjnych pakietu %s (%s) ...
+Składanie pakietu %s z %d części: Składanie pakietu %s z %d części: Składanie pakietu %s z %d części: Zapisane informacje o %s z %s.
+Usuwanie istotnych pakietówUsuwanie pakietów, które wymagają instalacjiUsuwanie pakietu %s (%s) ...
+Usuwanie "%s"
+Zastępowanie pakietu niższą wersjąZastąpienie przez pliki z instalowanego pakietu %s (%s) ...
+Zastąpienie informacji o dostępnych pakietach, przy użyciu %s.
+Zastąpienie plików z starego pakietu %s (%s) ...
+Uruchom update-alternatives, aby zmienić wybór alternatyw w systemieWybieranie wcześniej niewybranego pakietu %s.
+WybórUstawianie wszystkich opcji wymuszeniaKonfigurowanie pakietu %s (%s) ...
+Nierozsądna ilość informacji dotyczących wyzwalaczyPomijanie nieprawidłowego wiersza: %sPominięcie nieznanej alternatywy %s.Pomijanie niewybranego pakietu %s.
+Dzielenie pakietu %s na %d część: Dzielenie pakietu %s na %d części: Dzielenie pakietu %s na %d części: StatusNastępujące pakiety oczekują na przetworzenie wyzwalaczy, które zostały
+aktywowane w innych pakietach. Przetwarzanie można wywołać na żądanie używając
+dpkg --configure --pending (lub dpkg --triggers-only) albo dselect:
+W przypadku niżej wymienionych pakietów wystąpiły problemy podczas
+instalowania. Aby te pakiety (oraz inne, zależne od nich) działały
+poprawnie, muszą zostać zainstalowane ponownie.
+Następujące pakiety nie posiadają pliku kontrolnego list
+w bazie danych i muszą zostać zainstalowane ponownie:
+Następujące pakiety nie posiadają pliku kontrolnego md5sums
+w bazie danych i muszą zostać zainstalowane ponownie:
+Niżej wymienione pakiety zostały częściowo skonfigurowane, gdyż prawdopodobnie
+wystąpiły problemy podczas ich pierwszego konfigurowania. Należy ponowić
+próbę konfigurowania wywołaniem dpkg --configure <pakiet> lub użyciem
+opcji konfiguracji z menu w dselect:
+Niżej wymienione pakiety zostały częściowo zainstalowane, gdyż wystąpiły
+problemy podczas ich instalowania. Proces ten prawdopodobnie może zostać
+powtórzony; pakiety mogą też być usunięte poprzez wywołanie dpkg --remove
+lub użycie dselect.
+Następujące pakiety nie mają zdefiniowanej architektury:
+Następujące pakiety mają nieprawidłową architekturę:
+Następujące pakiety posiadają nieznaną architekturę obcą, która będzie
+powodowała problemy z zależnościami w interfejsach do dpkg. Można im zapobiec
+rejestrując obcą architekturę za pomocą dpkg --add-architecture:
+Następujące pakiety zostały pobudzone, ale przetwarzanie wyzwalaczy
+jeszcze się nie zakończyło. Przetwarzanie można wywołać na żądanie używając
+dpkg --configure --pending (lub dpkg --triggers-only) albo dselect:
+Niżej wymienione pakiety zostały rozpakowane ale nie skonfigurowane.
+Aby te pakiety działały poprawnie, muszą zostać skonfigurowane poprzez
+wywołanie dpkg --configure lub użycie opcji konfiguracji w menu dselect.
+Jest %d dostępna alternatywa dla %s (dostarczającego %s).Są %d dostępne alternatywy dla %s (dostarczającego %s).Jest %d dostępnych alternatyw dla %s (dostarczającego %s).Nie znaleziono programu, który dostarcza %s.Jest tylko jedna alternatywa w grupie dowiązań %s (udostępniających %s): %sNiniejszy program jest wolnym oprogramowaniem, proszę zapoznać się z licencją
+GNU General Public License w wersji 2 lub późniejszej, aby poznać warunki
+rozpowszechniania. Nie udziela się ŻADNEJ gwarancji.
+Aktywowanie i przetwarzanie wyzwalaczyPróba instalowania/usuwania nawet nie będąc rootemZmienianie wszystkich problemów z zależnościami w ostrzeżeniaZmienianie wszystkich problemów z wersją w ostrzeżeniaNależy wpisać "exit" po zakończeniu pracy.
+Proszę wpisać dpkg --help, aby dowiedzieć się jak (od)instalować pakiety [*].
+"dselect" i "aptitude" są wygodnymi programami do zarządzania pakietami.
+Proszę wpisać dpkg -Dhelp, aby dowiedzieć się o opcjach debuggera.
+Proszę wpisać dpkg --force-help, aby dowiedzieć się, jak ignorować problemy.
+Proszę wpisać dpkg-deb --help, aby dowiedzieć się, jak operować plikami *.deb.
+
+Opcje oznaczone [*] podają dużo treści - proszę użyć potoku z "less" lub "more"!Proszę wpisać: dpkg-deb --help, aby dowiedzieć się jak operować plikami *.deb;
+dpkg --help, aby dowiedzieć się jak (od)instalować pakiety.Proszę wpisać dpkg-split --help, aby otrzymać pomoc.Proszę wpisać dpkg-trigger --help, aby otrzymać pomoc.Rozpakowywanie pakietu %s (%s) ...
+Rozpakowywanie pakietu %s (%s) nad (%s) ...
+Zaktualizowanie informacji o dostępnych pakietach, przy użyciu %s.
+Użycie: %s [<opcja> ...] <polecenie>
+
+Proszę użyć "%s --help", aby otrzymać informacje o użyciu programu.Proszę użyć "apt" lub "aptitude", jeśli potrzebny jest wygodny
+program do zarządzania pakietami.
+Proszę użyć --help, aby otrzymać pomoc na temat ominięć plików.Proszę użyć --help, aby otrzymać pomoc na temat nadpisywania informacji o stanie pliku.Proszę użyć --help, aby uzyskać pomoc dotyczącą odpytywania pakietów.Użyj dpkg --contents (= dpkg-deb --contents), aby sprawdzić zawartość pakietu.
+Użyj dpkg --info (= dpkg-deb --info), aby zobaczyć informacje o pakiecie.
+Proszę użyć dpkg z -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+na archiwach (patrz %s --help).
+
+Używanie domyślnej opcji dla nowych plików konfiguracyjnych, bez pytania,
+jeśli jest dostępna. Jeśli nie można znaleźć opcji
+domyślnej, pytanie użytkownika, chyba że podana
+zostania opcja confold albo confnewPrzydatne zmienne środowiskowe:
+Walidowalne: pkgname, archname, trigname, version.
+
+WersjaWersja dpkg obsługująca %s nie jest jeszcze skonfigurowana.
+ Należy wykonać "dpkg --configure dpkg" i później spróbować ponownie.
+Domyślne opcje podczas dodawania: --local i --divert <oryginał>.distrib.
+Podczas usuwania: --package lub --local i --divert muszą pasować, jeśli podano.
+Skrypty przed/poinstalacyjne muszą zawsze podawać --package i --divert.
+Usunięcie lub wyczyszczenie %s (%s) ...
+[domyślnie=N][domyślnie=Y][brak domyślnego działania]admindir musi znajdować się wewnątrz instdir, aby dpkg pracował prawidłowokonfiguracja także dla "%s" (wymagana przez "%s")alternatywa %s (zawarta w grupie dowiązań %s) nie istnieje - usuwanie jej z listy alternatywalternatywa %s nie może być nadrzędna: jest podrzędna względem %salternatywa %s nie może być podrzędna względem %s: jest alternatywą nadrzędnąalternatywa %s nie może być podrzędna względem %s: jest podrzędna względem %salternatywa %s dla %s nie jest zarejestrowana - nie będzie usuniętaalternatywa %s dla %s nie jest zarejestrowana - nie będzie ustawionadowiązanie alternatywy %s jest już zarządzane przez %sdowiązanie alternatywy %s jest już zarządzane przez %s (podrzędne względem %s)dowiązanie alternatywy nie jest bezwzględne jak jest to wymagane: %snazwa alternatywy (%s) nie może zawierać "/" i spacjiścieżka alternatywy nie jest bezwzględna jak jest to wymagane: %sniejednoznaczna nazwa pakietu "%s" z więcej niż jedną zainstalowaną kopiąnadpisanie dla "%s" już istnieje, ale podano --force, więc zostanie zignorowanenadpisanie dla "%s" już istnieje - przerywaniedowolne ominięcie %sdowolne ominięcie %s do %snazwa członu ar "%s" jest zbyt długanazwa członu ar %jd jest zbyt duża<pusty><brak><nieznany>architektura "%s" jest nieprawidłowa: %sarchitektura "%s" jest zarezerwowana i nie może zostać dodananazwa architektury "%s" jest nieprawidłowa: %sarchiwum "%.250s" zawiera dwa archiwa kontrolne, przerywaniearchiwum "%s" zawiera przedwczesny człon "%.*s" przed "%s", przerywaniearchiwum "%s" nie jest zwykłym plikiemarchiwum "%s" używa nieznanej kompresji dla członu z danymi "%.*s", przerywaniearchiwum zawiera obiekt "%.255s" nieznanego typu 0x%xrozmiar członu kontrolnego archiwumarchiwum ma nieprawidłową wersję formatu: %sarchiwum ma zły rozmiar członu kontrolnego "%s"archiwum nie zawiera znaków nowej linii w nagłówkuczłon informacyjny nagłówka archiwumarchiwum jest w wersji formatu %d.%d - potrzebny jest nowy dpkg-debliczba magiczna wersji archiwumnagłówek członu archiwumnumery części archiwumoffset części archiwumliczba części archiwumcałkowity rozmiar archiwumtryb autoautomatyczne aktualizacje %s/%s są wyłączone - pozostawianie go bez zmianoczekiwanie na przetworzenie wyzwalaczy przez inny pakietpusta linia w wartości pola "%.*s"uszkodzony z powodu błędów podczas usuwania lub instalacjiuszkodzony podczas przetwarzania skryptu "postinst"budowanie nieznanego pakietu w "%s".budowanie pakietu "%s" w "%s".nie można zainstalować nieznanego wyboru %snie można wykonać funkcji "mmap" na pliku informacji o pakiecie "%.255s"nie można usunąć starego skryptu postrmnie można wykonać funkcji "stat" na pliku informacji o pakiecie "%.255s"brak dostępu do archiwum "%s"nie dopisać pliku będącego częścią ar (%s) do "%s": %snie można dodać podzielonej części pakietu "%s" do "%s": %snie można dopisać do "%s"nie można zamknąć potoku dekompresyjnegonie można obliczyć sumy MD5 pliku "%s": %snie można obliczyć sumy MD5 pliku tar "%.255s": %snie można przekształcić wielobitowej sekwencji "%s" na znak szerokinie można przekształcić wielobitowego łańcucha "%s" na łańcuch szerokoznakowynie można skopiować "%s" do archiwum "%s": %snie można skopiować "%s" do "%s": %snie można skopiować członu archiwum z "%s" do potoku dekompresyjnego: %snie można skopiować wypakowanych danych "%.255s" do "%.255s": %snie można omijać katalogównie można ominąć pliku "%s" do siebie samegonie można wypakować pliku kontrolnego "%s" z "%s": %snie można rozpakować podzielonej części pakietu "%s": %snie można uzyskać uchwytu etykietowania bezpieczeństwanie można otworzyć %snie można otworzyć "%.255s" (w "%.255s")nie można otworzyć pliku części "%.250s"nie można otworzyć katalogu "%s"nie mozna otworzyć kanału powiadomień statusu bezpieczeństwanie można odczytać %snie można odczytać katalogu pliku konfiguracyjnego "%.250s" (z "%.250s")nie można odczytać katalogu informacyjnegonie można usunąć "%.250s"nie można usunąć architektury "%s" używanej aktualnie przez bazę danychnie można usunąć nieobcej architektury "%s"nie można usunąć kopii starego pliku konfiguracyjnego "%.250s" (od "%.250s")nie można usunąć starego pliku konfiguracyjnego "%.250s" (= "%.250s")nie można usunąć starej listy plikównie można zmienić nazwy "%s" na "%s"nie można rozwiązać problemu ze wstępnymi wymaganiami dla %.250s (potrzebne dla %.250s)nie można przeszukać katalogu "%.255s"nie można przeszukać katalogu "updates" %.255snie można rozwiązać problemu ze wstępnymi wymaganiami:
+ %snie można ustawić root jako głównego identyfikatora grupynie można ustawić kontekstu zabezpieczeń dla obiektu plikowego "%s"nie można ustawić kontekstu zabezpieczeń wykonywania dla skryptu od opiekuna pakietunie można pominąć członu kontrolnego archiwum z "%s": %snie można pominąć członu archiwum z "%s": %snie można pominąć pliku "%.255s" (zastąpiony lub wyłączony?) z potoku: %snie można pominąć marginesu pliku "%.255s": %snie można pominąć dzielenia nagłówka pakietu "%s": %snie można ustalić stanu %snie można ustalić stanu "%.255s" (w "%.255s")nie można ustalić stanu pliku "%s"nie można ustalić stanu ścieżki "%s"nie można usunąć prawdopodobnych zer na końcu z dpkg-deb: %sznak "%c" jest niedozwolony (można użyć tylko liter, cyfr i "%s")skompresowane dane są uszkodzoneczłon kompresji tarplik konfiguracyjny "%.250s" nie został odnaleziony w pakiecienie można sprawdzić stanu pliku konfiguracyjnego "%.250s"plik konfiguracyjny "%s" nie jest zwykłym plikiemwizualizacja różnic w plikach konfiguracyjnychplik conffile zawiera pustą linięnazwa pliku konfiguracyjnego "%s" kończy się spacjamipowielona nazwa pliku konfiguracyjnego "%s"nazwa pliku konfiguracyjnego "%s" jest za długa lub brak w niej znaku końca liniiplik konfiguracyjny powłokibłąd konfiguracji: %s:%d: %skonflikt między działaniem -%c (--%s) i -%c (--%s)konflikt dla ominięcia "%.250s" lub "%.250s"konflikt pakietów - nie będzie instalowany %.250srozważanie dekonfiguracji %s, którego zależności zostałyby naruszone przez %s ...rozważanie dekonfiguracji istotnego
+ pakietu %s, aby włączyć %srozważanie usunięcia %s w zamian za %s ...katalog kontrolny ma złe prawa %03lo (muszą być >=0755 oraz <=0775)katalog kontrolny nie jest katalogiemplik kontrolny "%s" nie istniejeplik kontrolny "%s" dla pakietu "%s" zawiera pustą nazwę plikuplik kontrolny "%s" dla pakietu "%s" nie zawiera kończącej pustej liniiw pliku kontrolnym "%s" dla pakietu "%s" brakuje wartościw pliku kontrolnym "%s" dla pakietu "%s" brakuje separatora wartościplik kontrolny zawiera %cczłon kontrolnyuszkodzony plik formatu bazy danych informacji "%s"nie można otworzyć pliku dziennika "%s": %snie można ustalić stanu starego pliku "%.250s", plik nie będzie usuwany: %snie udało się otworzyć "%i" jako strumieniaaktualna alternatywa %s jest nieznana, zmienianie na %s dla grupy dowiązań %swykryto cykl podczas przetwarzania wyzwalaczy:
+ lista pakietów, których wyzwalacze mogły to spowodować:człon danychproblemy z zależnościami - pozostawianie nieprzetworzonych wyzwalaczyproblemy z zależnościami - pozostawianie nieskonfigurowanegoproblemy z zależnościami - nie zostanie usuniętyproblemy z zależnościami uniemożliwiają skonfigurowanie pakietu %s:
+%sproblemy z zależnościami uniemożliwiają przetworzenie wyzwalaczy dla pakietu %s:
+%sproblemy z zależnościami uniemożliwiają usunięcie %s:
+%sodrzucanie przestarzałego dowiązania podrzędnego %s (%s)ominięcie przez %s z: %s
+ominięcie przez %s do: %s
+ominięcie %s przez %sominięcie %s do %s przez %sdivert-to nie może zawierać znaków nowej liniiominięty przez %s do: %s
+omijanie pliku "%s" z pakietu Essential za pomocą rename jest niebezpieczne, użyj --no-renamegotowe
+zastąpienie %.250s w wersji %.250s wcześniejszą wersją %.250snie odnaleziono dpkg w bazie danych, nie można sprawdzić czy obsługuje %s!
+powielony pakiet oczekującego wyzwalacza "%.255s"powielony warunek uruchomienia wyzwalacza plikowego dla pliku "%.250s" i pakietu "%.250s"powielona ścieżka %spowielona nazwa zaplanowanego wyzwalacza "%.255s"powielone dowiązanie podrzędne %spowielona nazwa podrzędna %spowielona wartość pola "%s"powielona wartość pola definiowanego przez użytkownika "%.*s"pusta nazwa polafunkcja "fgets" zwróciła pusty ciąg znaków podczas odczytu pliku konfiguracyjnegopuste nazwy wyzwalaczy są niedozwolonekoniec pliku po nazwie pola "%.*s"koniec pliku przed wartością pola "%.*s" (brak końca linii)koniec pliku w wartości pola "%.*s" (brak końca linii)koniec pliku standardowego wejścia wykryty po znaku zachętyepokaepoka w numerze wersji jest pustaepoka w numerze wersji jest ujemnaepoka w numerze wersji nie jest liczbąepoka w numerze wersji jest zbyt dużabłądbłąd sprawdzania "%s"nie można zamknąć %.250sbłąd przy zamykaniu pliku konfiguracyjnego "%.250s"nie można zamknąć/zapisać "%.255s"nie można utworzyć urządzenia "%.255s"nie można utworzyć katalogu "%.255s"nie można utworzyć dowiązania "%.255s"nie można utworzyć nowego pliku zapasowego "%s"nie można utworzyć potoku "%.255s"nie można utworzyć dowiązania symbolicznego "%.255s"nie można usunąć "%.250s"błąd wykonywania funkcji "%s", status zakończenia %dbłąd podczas formatowania ciągu w zmienną varbufbłąd w pokazywanym formacie: %sbłąd podczas instalowania nowego pliku "%s"nie można otworzyć pliku konfiguracyjnegobłąd przy otwarciu katalogu konfiguracji "%s"błąd przetwarzania archiwum %s (--%s):
+ %sbłąd przetwarzania pakietu %s (--%s):
+ %sbłąd odczytu %.250snie można odczytać %s z pliku %.255snie można odczytać pliku konfiguracyjnegonie można odczytać potoku z "dpkg-deb"błąd podczas odczytu pliku wyzwalaczy odłożonych "%.250s"błąd usuwania starego pliku zapasowego "%s"nie można zmienić właściciela "%.255s"nie można zmienić właściciela dowiązania symbolicznego "%.255s"nie można zmienić uprawnień "%.255s"nie można zaktualizować czasu modyfikacji dla "%.255s"nie można otworzyć %.250snie można odzyskać sygnału %s: %s
+błąd podczas czyszczenia środowiskabłąd podczas zapisu "%s"błąd zapisu "%s"błąd zapisu do '%s'błąd zapisu do listy architekturbłąd zapisu do stderr wykryty przed ukazaniem się znaku zachętynie można zaalokować pamięcibłąd podczas przydzielania pamięci dla nowej pozycji w liście błędnych pakietów: %snie można zmienić katalogu na "%.255s"nie można zmienić katalogu bieżącegonie można zmienić katalogu głównego na "%.250s"nie można zamknąć "%.255s"nie można utworzyć katalogunie można utworzyć potokunie można wykonać funkcji "dup" dla fd %dnie można wykonać funkcji "dup" dla std%snie można ustalić stanu pliku składowego ar (%s)nie można ustalić stanu archiwumnie można ustalić stanu listy ominiętych plikównie można ustalić stanu pliku statoverridenie można utworzyć pliku tymczasowego (%s)nie można otworzyć do odczytu pliku konfiguracyjnego "%.255s": %snie można otworzyć listy ominiętych plikównie można otworzyć do odczytu pliku "%.255s" zawierającego informacje o pakiecienie można otworzyć listy pliku statoverridenie udało się otworzyć pliku listy warunków uruchomienia wyzwalacza "%.250s"nie udało się odczytaćnie można odczytać "%.255s" (w "%.255s")nie można odczytać archiwum "%.255s"nie można usunąć pliku %.255s z katalogu "updates"nie można usunąć uaktualnionego pliku %.255snie można wykonać "rewind" na pliku tymczasowym (%s)nie udało się przewinąć pliku warunków uruchomienia wyzwalacza "%.250s"nie udało się przewinąćnie można rozwiązać dowiązania symbolicznego "%.250s"nie można ustalić stanu (rozwiązać) proponowanego nowego celu dowiązania symbolicznego "%.250s" dla dowiązania "%.250s"nie można wykonać "stat" na pliku tymczasowym (%s)nie można wykonać "unlink" na pliku tymczasowym (%s), %snie udało się zapisaćnie można zapisać rekordu bazy danych "%s" dotyczącego "%.50s" w "%.250s"nie można zapisać szczegółów o "%.50s" w "%.250s"nie można wpisać nazwy pliku do potoku do programu tar (%s)funkcja "fgets" zwróciła pusty ciąg znaków z "%.250s"nazwa pola "%.*s" nie może rozpoczynać się myślnikiempo nazwie pola "%.*s" musi wystąpić dwukropekszerokość pola jest poza zakresemplik "%.250s" ma nieprawidłową wersję formatu: %splik "%.250s" jest uszkodzony - brakuje %.250splik "%.250s" jest uszkodzony - zły skrót MD5 "%.250s"plik "%.250s" jest uszkodzony - zła liczba magiczna nagłówka archiwumplik "%.250s" jest uszkodzony - zły numer części archiwumplik "%.250s" jest uszkodzony - zła cyfra (kod %d) w %splik "%.250s" jest uszkodzony - zła liczba magiczna na końcu pierwszego nagłówkaplik "%.250s" jest uszkodzony - zła liczba magiczna na końcu drugiego nagłówkaplik "%.250s" jest uszkodzony - zła liczba części archiwumplik "%.250s" jest uszkodzony - zły znak (kod %d)plik "%.250s" jest uszkodzony - brakuje znaku nowej linii po %.250splik "%.250s" jest uszkodzony - brak ukośnika między numerami części archiwumplik "%.250s" jest uszkodzony - puste znaki w sekcji informacyjnejplik "%.250s" jest uszkodzony - drugi człon nie jest członem z danymiplik "%.250s" jest uszkodzony - zły rozmiar dla wybranej ilości częściplik "%.250s" jest uszkodzony - zbyt krótkiplik "%.250s" jest uszkodzony - zła liczba części dla wybranego rozmiaruplik "%.250s" jest w wersji formatu "%d.%d" - potrzebny jest nowszy dpkg-splitplik "%.250s" nie jest archiwum binarnym Debiana (spróbuj dpkg-split?)plik "%.250s" nie jest częścią archiwumplik "%.250s" jest uszkodzony - liczba całkowita poza zakresem w %splik "%s" nie jest częścią archiwum
+nie rozpoznano formatu plikuplik wygląda na archiwum, które zostało uszkodzone podczas
+ transferu FTP dokonanego w trybie ASCIIplik nie może zawierać znaków nowej liniiopis wyzwalacza plikowego zawiera nieprawidłową nazwę pakietu "%.250s" (w warunku uruchomienia dla pliku "%.250s"): %.250snazwa pliku "%s" nie jest absolutnaplik "%.250s" oraz "%.250s" nie są częściami tego samego archiwumlista plików pakietu "%.250s" zawiera pustą nazwę plikulista plików pakietu "%.250s" nie zawiera kończącej pustej liniibrak listy plików pakietu "%.250s" - przyjęcie, że pakiet nie ma zainstalowanych plikówwymuszenie ponownej instalacji alternatywy %s, ponieważ grupa dowiązań %s jest nieprawidłowanie można wykonać funkcji "fork"wersja formatu poprzedzona przez nieprawidłowe wartościwersja formatu nie ma kropkinumer wersji formatuwersja formatu z pustą główną częścią składowąwersja formatu z pustą poboczną częścią składowąwersja formatu ze zbyt dużą główną częścią składowąwersja formatu ze zbyt dużą poboczną częścią składowąznaleziony nieznany pakiet - może to znaczyć, że dostępna baza danych
+jest przestarzała i musi być zaktualizowana przy pomocy metody fasadowej -
+proszę zobaczyć FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>wygenerowano nieprawidłowy nagłówek ar dla "%s"grupa"%s" nie istniejenagłówek jest zbyt długi, co daje zbyt długą część - nazwa pakietu lub numer
+wersji musi być nadzwyczaj długi lub wystąpił podobny błąd - przerywaniezignorowanie %d ostrzeżenia na temat pliku/plików kontrolnychzignorowanie %d ostrzeżeń na temat pliku/plików kontrolnychzignorowanie %d ostrzeżeń na temat pliku/plików kontrolnychzignorowanie naruszenia zależności, dalsze przetwarzanie!ignorowanie konfliktu, dalsze przetwarzanie!ignorowanie problemu z zależnościami z %s:
+%signorowanie problemu ze wstępnymi wymaganiami!ignorowanie żądania usunięcia pakietu %.250s, który nie jest zainstalowanyignorowanie żądania usunięcia %.250s, ponieważ w systemie
+ są tylko jego pliki konfiguracyjne - --purge usunie także te plikinieprawidłowa nazwa architektury w określniku "%s:%s": %snieprawidłowa nazwa pakietu do oczekiwania "%.250s": %.250snieprawidłowa nazwa pakietu w linii %d: %.250snieprawidłowa nazwa pakietu w oczekującym wyzwalaczu "%.255s": %snieprawidłowa nazwa pakietu w określniku "%s%s%s": %snieprawidłowa nazwa zaplanowanego wyzwalacza "%.255s": %sformat bazy danych informacji (%d) jest nieprawidłowy lub zbyt nowy - proszę spróbować użyć nowszego dpkgplik informacyjny %s/%s nie jest powiązany z żadnym pakieteminstalowanie %.250szainstalowanyzainstalowany pakiet %s skrypt %sinstalacja %.250s narusza zależności %.250s, a
+nie pozwolono na dekonfigurację (--auto-deconfigure może pomóc)instalacja %.250s wprowadzi niespełnione zależności w istniejącym oprogramowaniubłąd wewnętrznybłąd wewnętrzny (bug)Nieprawidłowy znak "%c" w składniku archiwum "%.250s" o rozmiarze "%.16s".nieprawidłowy znak "%c" w szerokości polanieprawidłowy znak w numerze rewizjinieprawidłowy znak w numerze wersjibłędny poziom kompresji dla -%c: %ldbłędne parametry kompresji: %snieprawidłowa wersja formatu deb: %sbłędna liczba całkowita dla -%c: "%.250s"błędna wartość liczbowa dla --%s: "%.250s"nieprawidłowa lub nieznana składnia nazwy wyzwalacza "%.250s" (w warunkach uruchomienia wyzwalacza dla pakietu "%.250s")nieprawidłowa nazwa pakietu "%.250s" w pliku wyzwalaczy odłożonych "%.250s"nieprawidłowe statoverride gid %snieprawidłowe statoverride mode %snieprawidłowe statoverride uid %sniepoprawny statusniewłaściwa nazwa wyzwalacza "%.250s": %.250swiersz niezakończony, podczas próby odczytu %swiersz jest zbyt długi lub niezakończony podczas próby odczytu %sdowiązanie %s jest zarówno główne, jak i podrzędneładowanie pliku kontrolnego "%s" dla pakietu "%s"ładowanie listy plików pakietu "%.250s"lokalne ominięcie z: %s
+lokalne ominięcie %slokalne ominięcie %s do %slokalne ominięcie do: %s
+lokalnie ominięty do %s
+długie nazwy plikówskrypt instalacyjny "%.50s" ma złe prawa %03lo (muszą być >=0555 oraz <=0775)skrypt instalacyjny "%.50s" nie jest plikiem ani dowiązaniem symbolicznymnie można sprawdzić stanu skryptu instalacyjnego "%.50s"nie można wykonać funkcji "malloc" (%zu bajtów)tryb ręcznyplik nadrzędnydowiązanie nadrzędnemogą wystąpić problemy przy usuwaniu %s, jako że udostępnia %s ...nie można użyć pustego ciągu znakówosiągnięto limit użycia pamięciniedopasowanie argumentu divert-to
+  podczas usuwania "%s"
+  znaleziono "%s"niedopasowanie pakietu
+  podczas usuwania "%s"
+  znaleziono "%s"brakująca kwadratowy nawias zamykającywymieszane kopie pakietu, które mogą, z tymi, które nie mogą być zainstalowane razem - powodem jest prawdopodobnie aktualizacja przy użyciu nieoficjalnego dpkgwieloarchitekturowośćwielokrotne określenia Conflicts i Replacesobecnych jest kilka kopii pakietu, które nie mogą być zainstalowane razem - powodem jest prawdopodobnie aktualizacja przy użyciu nieoficjalnego dpkgwielokrotne określenia statoverrides dla pliku "%.250s"musi być uruchamiany ze skryptów opiekunów pakietów (lub z opcją --by-package)musi się zaczynać od litery lub cyfrymusi się zaczynać od litery lub cyfrynazwa %s jest zarówno główna, jak i podrzędnanależy określić działanienowy pakiet %s skrypt %skoniec linii w nazwie pola "%.*s"nowa linia nie dozwolona w nazwie obiektu archiwalnego "%.255s"koniec linii nie dozwolony w nazwie ścieżki "%s"znaki nowej linii są zabronione w plikach update-alternatives (%s)brak pliku "control" w archiwum kontrolnym!brak alternatyw dla %sbrak nadpisaniabrak informacji o pakiecie w "%.255s"pakiet "%s" nie jest zainstalowany, nie można go skonfigurowaćnie znaleziono pakietu pasującego do wzorca %snie znaleziono ścieżki pasującej do wzorca %sniestety, %s jest istotnym pakietem, który nie zostanie
+ zdekonfigurowany, aby włączyć %sniestety, nie można kontynuować przetwarzania %s (--auto-deconfigure może pomóc):
+%spominięcie sprawdzenia zawartości obszaru kontrolnegonie zainstalowanynie zainstalowany ale pliki konfiguracyjne pozostałynieusuwanie %s, ponieważ nie jest dowiązaniempomijanie zastąpienia %s dowiązaniembrak znaków po dwukropku w numerze wersjipusta nazwa pakietu dla --%s w liście rozdzielanej przecinkami "%.250s"liczba części archiwumniewykorzystywana już opcja "--%s" - niedostępne pakiety będą automatycznie czyszczoneniewykorzystywany już typ kompresji "%s" - w zamian proszę użyć xzniewykorzystywany już typ kompresji "%s" - w zamian proszę użyć xz lub gzipniewykorzystywana już opcja force/refuse "%s"niewykorzystywana już opcja "--%s"stary pakiet %s skrypt %sstary plik konfiguracyjny "%.250s" był pustym katalogiem (i właśnie został usunięty)stary plik "%.250s" jest taki sam, jak kilka nowych plików! (zarówno "%.250s", jak i "%.250s")stara wersja pakietu ma plik informacyjny o zbyt długiej nazwie rozpoczynającej się od "%.250s"w polu "%s" można używać wyłącznie dokładnych wersjinie można otworzyć pliku informacyjnego "%.255s" (w %.255s) z nieokreślonego powodubrak pamięci na nową pozycję dla obsługi czyszczenia środowiskabrak pamięci na nową pozycję z argumentami dla obsługi czyszczenia środowiskabrak pamięci na nowy błąd kontekstuzewnętrzny błąd kontekstu, przerywanieproblem zignorowany po użyciu opcji --force:pakiet %.250s jest już zainstalowany i skonfigurowanypakiet %.250s nie jest gotowy do skonfigurowania
+ nie można go skonfigurować (bieżący stan "%.250s")pakiet %.250s jest nie gotowy na przetwarzanie wyzwalaczy
+ (bieżący stan "%.250s", bez zaplanowanych wyzwalaczy)pakiet %s %s nie może zostać skonfigurowany, ponieważ %s jest w innej wersji (%s)pakiet %s nie może zostać skonfigurowany, ponieważ %s nie jest gotowy (bieżący stan "%s")pakiet %s zawierał listę plików jako plik informacyjnypakiet %s wymaga ponownej instalacji, ale zostanie usunięty według żądaniapakiet %s wymaga ponownej instalacji i nie zostanie usuniętypakiet %s został wstrzymany, zostanie przetworzony według żądaniapakiet "%s" jest niedostępnypakiet "%s" nie jest zainstalowanypakiet "%s" nie jest zainstalowany i informacje o nim nie są dostępnearchitektura pakietuarchitektura pakietu (%s) nie zgadza się z architekturą systemu (%s)brak lub pusta architektura pakietupakiet zawiera plik kontrolny o zbyt długiej nazwie (rozpoczynającej się od "%.50s")archiwum kontrolne pakietu zawiera katalog "%.250s"próba usunięcia katalogu "%.250s" nie wykazała, że to nie jest katalogrozpakowywanie informacji kontrolnej pakietupakiet omija inne do: %s
+wyodrębnianie pola wartości pakietusuma kontrolna MD5 pliku pakietuwyodrębnianie archiwum systemu plików pakietupakiet ma status %s, ale są oczekujące wyzwalaczepakiet ma status %s, ale są zaplanowane wyzwalaczepakiet jest w złym stanie - powinien zostać przeinstalowany przed usunięciemPakiet jest w złym stanie - powinien zostać zainstalowany ponownie
+ przed próbą jego skonfigurowania.pakiet nie może zawierać znaków nowej liniinazwa pakietunazwa pakietu "%s" jest nieprawidłowa: %snazwa pakietu zawiera znaki nie będące małymi literami, cyframi lub "-+."pakietu nie znajduje się w statusie ani dostępnej bazie danych, w wierszu %d: %.250ssprawdzanie podpisu pakietunumer wersji pakietuprogram stronicujący do pokazania plikubrakuje części %dplik części "%.250s" nie jest zwykłym plikiemrozmiar części jest za duży lub jest liczbą ujemnąrozmiar części musi mieć co najmniej %dk KiB (aby zmieścić nagłówek)powiodło się
+wklejścieżka nie może zawierać znaków nowej liniiproszę jawnie podać --no-rename, --rename stanie się domyślne w 1.20.xproblem ze wstępnymi wymaganiami - pakiet %.250s nie będzie instalowanypriorytetpriorytet jest poza zakresempriorytet musi być liczbąpriorytet %s jest poza zakresem: %spriorytet %s: %snie można odczytać %.250sbłąd odczytu "%.250s"błąd odczytu pliku konfiguracyjnego "%.250s"nie można odczytać standardowego wejściabłąd odczytu ze standardowego wejścia wykryty po znaku zachętynie można odczytać informacji o pakiecie "%.255s"nie można odczytać informacji o pakiecie '%s': %sodczytywanie pliku statoverride "%.250s"przebudowanie pliku pakietuproblem ze wstępnymi wymaganiami %s zawierającego %s:
+%sw odniesieniu do %s zawierającego %s:
+%susuwanie %.250susuwanie architektury "%s" używanej aktualnie przez bazę danychusuwanie alternatywy wybranej ręcznie - przełączanie %s do trybu autozmiana nazwy oznacza nadpisanie "%s" 
+  innym plikiem "%s", co nie jest dozwolonerename: usuwanie powielonego starego dowiązania "%s"żądana operacja wymaga uprawnień administratoranumer rewizji jest pustypolecenie rm do wyczyszczeniaprzeszukane, ale nie znaleziono żadnych pakietów (plików *.deb)<nieznany>ustawianie automatycznego wybierania %sodnaleziono kilka kopii informacji o pakiecie, tylko jedna jest dozwolonapolecenie powłoki do przenoszenia plikówpokazywanie listy pakietów za pomocą programu stronicującegopomijanie tworzenia %s ponieważ powiązany plik %s (lub grupa dowiązań %s) nie istniejeplik podrzędnydowiązanie podrzędnedowiązanie podrzędne takie samo jak dowiązanie główne %snazwa podrzędnaplik źródłowy "%.255s" nie jest zwykłym plikiemdzielenie przebudowanego pakietuplik statoverride zawiera pustą linięplik statoverride nie zawiera kończącej pustej liniistatusstatus programu logującegousuwanie końcowych znaków /podproces %s zwrócił kod błędu %drozmiar dowiązania symbolicznego "%.250s" zmienił się z %jd na %zdbłąd składni w pliku wyzwalaczy plikowych  "%.250s"błąd składni w pliku statoverridebłąd składni w pliku wyzwalaczy odłożonych "%.250s" w linii %d na pozycji %zd '%s'wymaga podania jednego argumentu - nazwy wyzwalaczacel jest katalogiem - nie można pominąć sprawdzenia pliku kontrolnegojest kilka różnych wersji części %d - przynajmniej "%.250s" oraz "%.250s"brak skryptu w nowej wersji pakietu - zaniechanie wywołania skryptuto jest istotny pakiet - nie powinien być usuwanyaby powrócić do aktualizacji automatycznych, proszę użyć "%s --auto %s"zbyt wiele błędów, zatrzymanieza dużo osadzonych błędów podczas obsługi błęduzbyt długa linia lub brakujący znak nowej linii w "%.250s"korzeń przeszukiwania drzewa %s nie jest katalogiembłąd składni w pliku warunków uruchomienia wyzwalacza "%.250s" - nieprawidłowa nazwa pakietu "%.250s": %.250snazwa wyzwalacza "%s" jest nieprawidłowa: %snazwa wyzwalacza zawiera niepoprawny znakinformacje o wyzwalaczach jeszcze nie istniejąwyzwalacz pobudzonyplik informacji kontrolnych triggers "%.250s" ma nieprawidłową składnię w nazwie wyzwalacza "%.250s": %.250splik informacji kontrolnych triggers zawiera nieznaną dyrektywę "%.250s"plik informacji kontrolnych triggers zawiera niepoprawną składnię dyrektywynie utworzono jeszcze katalogu zawierającego dane wyzwalaczyzapętlenie wyzwalaczy, przerywaniepróba wywołania skryptu z nowego pakietu ...próba nadpisania "%.250s", który istnieje także w pakiecie %.250s %.250spróba nadpisania "%.250s", który jest ominięciem "%.250s"próba nadpisania "%.250s", który jest ominięciem "%.250s" (pakiet %.100s)próba nadpisania katalogu "%.250s" w pakiecie %.250s %.250s przez obiekt nie będący katalogiempróba nadpisania dzielonego "%.250s", który różni się od innych kopii pakietu %.250spodano dwa polecenia: --%s i --%snie można otworzyć pliku wejściowego części archiwum "%.250s"nie można zmienić właściciela pliku docelowego "%.250s"nie można stwierdzić istnienia "%.250s"nie można sprawdzić statusu pliku blokady "%s"nie można sprawdzić istnienia archiwum "%.250s"nie można zmienić właściciela kopii dowiązania symbolicznego dla "%.255s"nie można wykonać porządkowania dla "%.255s" dopóki nie zostanie zainstalowana inna jego wersjanie można zamknąć pliku "%s"nie można zamknąć nowego pliku "%.250s"nie można zamknąć nowego pliku wyzwalaczy odłożonych "%.250s"nie można zamknąć uaktualnionego pliku "%.250s"nie można utworzyć "%.255s"nie można utworzyć "%.255s" (podczas przetwarzania "%.255s")nie można utworzyć pliku "%.255s"nie można utworzyć nowego pliku "%.250s"nie można utworzyć katalogu tymczasowegonie można utworzyć katalogu stanu wyzwalaczy "%.250s"nie można usunąć pliku kontrolnego "%.250s"nie można usunąć starego katalogu "%.250s": %snie można usunąć użytego pliku części "%.250s"nie można usunąć "%.250s"nie można wykonać %s (%s)nie można wypełnić pliku %.250snie można opróżnić buforów pliku %.250s po jego wypełnieniunie można opróżnić pliku "%s"nie można opróżnić nowego pliku "%.250s"nie można opróżnić buforów uaktualnionego pliku "%.250s"nie można ustalić stanu pliku źródłowegonie można zsynchronizować uaktualnionego pliku "%.250s"nie można odczytać flag deskryptora pliku dla "%.250s"nie można zignorować sygnału %s przed wykonaniem %.250snie można zainstalować "%.250s" jako "%.250s"nie można zainstalować nowego pliku informacyjnego "%.250s"nie można zainstalować nowego pliku informacyjnego "%.250s" jako "%.250s"nie można zainstalować nowego pliku wyzwalaczy odłożonych "%.250s"nie można zainstalować nowej wersji "%.255s"nie można zainstalować uaktualnionego pliku "%.250s"nie można zablokować %snie można zrobić kopii dowiązania dla "%.255s" dopóki nie zostanie zainstalowana inna jego wersjanie można zrobić kopii dowiązania symbolicznego dla "%.255s"nie można przenieść "%.255s", aby zainstalować nową wersjęnie można otworzyć "%.255s"nie można otworzyć katalogu "%s"nie można otworzyć pliku "%s"nie można otworzyć nowego pliku części "%.250s"nie można otworzyć pliku wyjściowego "%.250s"nie można otworzyć pliku źródłowego "%.255s"nie można otworzyć tymczasowego katalogu kontrolnegonie można otworzyć pliku informacji kontrolnych triggers "%.250s"nie można otworzyć pliku wyzwalaczy odłożonych "%.250s"nie można otworzyć/utworzyć nowego pliku wyzwalaczy odłożonych "%.250s"nie można odczytać czasu modyfikacji "%.255s"nie można odczytać katalogu części "%.250s"nie można odczytać pliku wyzwalaczy plikowych "%.250s"nie można odczytać flag deskryptora pliku dla "%.250s"nie można odczytać dowiązania "%.255s"nie można odczytać pliku części "%.250s"nie można usunąć "%s"nie można usunąć kopii zapasowej "%.250s"nie można usunąć skopiowanego pliku źródłowego "%s"nie można usunąć zainstalowanej nowej wersji "%.250s"nie można usunąć nowo zainstalowanej wersji "%.250s"nie można usunąć zainstalowanej nowej wersji "%.250s", aby umożliwić ponowną instalację kopii zapasowejnie można usunąć nieaktualnego pliku informacyjnego "%.250s"nie można zmienić nazwy nowego pliku części z "%.250s" na "%.250s"nie można otworzyć pliku części "%.250s"nie można odtworzyć kopii zapasowej "%.250s"nie można bezpiecznie usunąć "%.250s"nie można bezpiecznie usunąć "%.255s"nie można usunąć bezpiecznie starego pliku "%.250s": %snie można przewinąć na początek pliku %.250s po jego wypełnieniunie można ustawić buforowania na pliku bazy danych %snie można ustawić flagi close-on-exec dla "%.250s"nie można ustawić praw do wykonywania "%.250s"nie można ustawić uprawnień pliku docelowego "%.250s"błąd ustawiania zmiennych środowiska dla skryptu od opiekuna pakietubłąd ustawiania zmiennych środowiska dla podprocesunie można ustalić stanu %s "%.250s"nie można ustalić stanu %s "%.250s": %snie można ustalić stanu "%.250s"nie można ustalić stanu katalogu kontrolnegonie można ustalić stanu aktualnego pliku konfiguracyjnego "%.250s"nie można ustalić stanu nowego pliku konfiguracyjnego "%.250s"nie można ustalić stanu nowego pliku "%.250s"nie można ustalić stanu odzyskanego "%.255s" dopóki nie zostanie zainstalowana inna jego wersjanie można odczytać stanu pliku źródłowego "%.250s"nie można ustalić stanu pliku wyzwalaczy odłożonych "%.250s"nie można zsynchronizować katalogu "%s"nie można zsynchronizować pliku "%.255s"nie można zsynchronizować pliku "%s"nie można zsynchronizować nowego pliku "%.250s"nie można obciąć uaktualnionego pliku "%.250s"nie można odblokować %snie można zapisać pliku "%s"nie można zapisać nowego pliku "%.250s"nie można zapisać nowego pliku wyzwalaczy odłożonych "%.250s"nie można zapisać statusu do fd %dnie można zapisać uaktualnionego pliku "%.250s"niesparowane cudzysłowy w "%s"niespodziewany błąd bzip2niespodziewane dane po nazwie pakietu i wyborze w linii %dniespodziewany koniec pliku po nazwie pakietu w linii %dniespodziewany koniec pliku przed końcem linii %dniespodziewany koniec linii w %s w %.255sniespodziewany koniec pliku w nazwie pakietu w linii %dniespodziewany koniec pliku lub strumienianiespodziewany koniec czytania pliku "%.250s"niespodziewany koniec pliku podczas próby odczytu %sniespodziewany koniec wejścianiespodziewany koniec linii po nazwie pakietu w linii %dniespodziewany koniec linii w nazwie pakietu w linii %dniespodziewany koniec linii w pliku statoverrideniespodziewana już istniejąca ścieżka %snieznany argument "%s"nieznana strategia kompresjinieznana strategia kompresji "%s"!nieznany typ kompresji "%s"!nieznana wersja formatu deb: %snieznana opcja force/refuse "%.*s"nieznana opcja "%s"nieznana opcja -%cnieznana opcja --%snieznana format weryfikacji wyjścia "%s"nieznany stan żądania pakietu w linii %d: %.250srozpakowany ale nie skonfigurowanynienaprawialny błąd krytyczny, przerywanienieobsługiwany schemat kompresjinieobsługiwany typ kompresji "%s" z jednorodną kompresjąnieobsługiwane opcje w nagłówku plikunieobsługiwany typ sprawdzenia integralnościkatalog "updates" zawiera plik "%.250s" o zbyt długiej nazwie (długość=%d, maksymalnie=%d)katalog "updates" zawiera pliki z nazwami o różnej długości (%d oraz %d)aktualizacja alternatywy %s, ponieważ grupa dowiązań %s zmieniła dowiązania podrzędneużytkownik "%s" nie istniejepole definiowane przez użytkownika ma zbyt krótką nazwę "%.*s"użycie %s jako dostarczającego %s (%s) w trybie automatycznymużycie %s jako dostarczającego %s (%s) w trybie ręcznymwartość dla "%s" ma niepoprawną linię "%.*s"niedozwolona wartość w tym kontekście dla pola "%s"sprawdzenie pakietu %s nie powiodło się!nie udało się sprawdzić pakietu %s, ale zostanie zainstalowany według żądania<brak>wersja %.250s pakietu %.250s jest już zainstalowana, pomijaniewersja "%s" ma złą składnięwersja "%s" ma złą składnię: %snumer wersji nie zaczyna się cyfrąnumer wersji jest pustyciąg znaków dla numeru wersji zawiera spacjeciąg znaków dla numeru wersji jest pustywersjonowane Providesoczekiwanie na podproces %s nie powiodło sięoczekiwanie na podproces %s nie powiodło sięostrzeżeniepodczas odczytu %s: %spodczas usuwania pakietu %.250s, katalog "%.250s" nie był pusty, więc nie został usuniętypodczas usuwania %.250s nie można usunąć katalogu "%.250s": %s - być może katalog jest punktem montowania?pakiet %.250s w wersji %.250s nie będzie zastąpiony wcześniejszą wersją %.250s, pomijanietak, %s zostanie zdekonfigurowany (naruszenie zależności przez %s)tak, %s zostanie usunięty w zamian za %snależy podać nazwę pakietu, a nie nazwę pliku, z którego został zainstalowany
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/POTFILES dpkg-1.20.7.1/po/POTFILES
--- dpkg-1.20.7.1-orig/po/POTFILES	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/POTFILES	2021-06-09 18:24:52.107468554 -0500
@@ -0,0 +1,108 @@
+     ../lib/dpkg/ar.c \
+     ../lib/dpkg/arch.c \
+     ../lib/dpkg/atomic-file.c \
+     ../lib/dpkg/buffer.c \
+     ../lib/dpkg/c-ctype.c \
+     ../lib/dpkg/cleanup.c \
+     ../lib/dpkg/color.c \
+     ../lib/dpkg/command.c \
+     ../lib/dpkg/compress.c \
+     ../lib/dpkg/dbdir.c \
+     ../lib/dpkg/dbmodify.c \
+     ../lib/dpkg/db-ctrl-access.c \
+     ../lib/dpkg/db-ctrl-format.c \
+     ../lib/dpkg/db-ctrl-upgrade.c \
+     ../lib/dpkg/db-fsys-digest.c \
+     ../lib/dpkg/db-fsys-divert.c \
+     ../lib/dpkg/db-fsys-files.c \
+     ../lib/dpkg/db-fsys-override.c \
+     ../lib/dpkg/deb-version.c \
+     ../lib/dpkg/debug.c \
+     ../lib/dpkg/depcon.c \
+     ../lib/dpkg/dir.c \
+     ../lib/dpkg/dump.c \
+     ../lib/dpkg/ehandle.c \
+     ../lib/dpkg/error.c \
+     ../lib/dpkg/fdio.c \
+     ../lib/dpkg/fields.c \
+     ../lib/dpkg/file.c \
+     ../lib/dpkg/fsys-dir.c \
+     ../lib/dpkg/fsys-iter.c \
+     ../lib/dpkg/fsys-hash.c \
+     ../lib/dpkg/glob.c \
+     ../lib/dpkg/i18n.c \
+     ../lib/dpkg/log.c \
+     ../lib/dpkg/mlib.c \
+     ../lib/dpkg/namevalue.c \
+     ../lib/dpkg/nfmalloc.c \
+     ../lib/dpkg/options-parsers.c \
+     ../lib/dpkg/options.c \
+     ../lib/dpkg/pager.c \
+     ../lib/dpkg/parse.c \
+     ../lib/dpkg/parsehelp.c \
+     ../lib/dpkg/path-remove.c \
+     ../lib/dpkg/path.c \
+     ../lib/dpkg/pkg-array.c \
+     ../lib/dpkg/pkg-files.c \
+     ../lib/dpkg/pkg-format.c \
+     ../lib/dpkg/pkg-hash.c \
+     ../lib/dpkg/pkg-list.c \
+     ../lib/dpkg/pkg-namevalue.c \
+     ../lib/dpkg/pkg-queue.c \
+     ../lib/dpkg/pkg-show.c \
+     ../lib/dpkg/pkg-spec.c \
+     ../lib/dpkg/pkg.c \
+     ../lib/dpkg/progname.c \
+     ../lib/dpkg/program.c \
+     ../lib/dpkg/progress.c \
+     ../lib/dpkg/report.c \
+     ../lib/dpkg/strhash.c \
+     ../lib/dpkg/string.c \
+     ../lib/dpkg/strwide.c \
+     ../lib/dpkg/subproc.c \
+     ../lib/dpkg/tarfn.c \
+     ../lib/dpkg/treewalk.c \
+     ../lib/dpkg/trigdeferred.c \
+     ../lib/dpkg/triglib.c \
+     ../lib/dpkg/trigname.c \
+     ../lib/dpkg/trignote.c \
+     ../lib/dpkg/utils.c \
+     ../lib/dpkg/varbuf.c \
+     ../lib/dpkg/version.c \
+     ../src/archives.c \
+     ../src/cleanup.c \
+     ../src/configure.c \
+     ../src/depcon.c \
+     ../src/divertcmd.c \
+     ../src/enquiry.c \
+     ../src/errors.c \
+     ../src/file-match.c \
+     ../src/filters.c \
+     ../src/force.c \
+     ../src/help.c \
+     ../src/main.c \
+     ../src/packages.c \
+     ../src/perpkgstate.c \
+     ../src/querycmd.c \
+     ../src/remove.c \
+     ../src/script.c \
+     ../src/select.c \
+     ../src/selinux.c \
+     ../src/statcmd.c \
+     ../src/trigcmd.c \
+     ../src/trigproc.c \
+     ../src/unpack.c \
+     ../src/update.c \
+     ../src/verify.c \
+     ../dpkg-deb/build.c \
+     ../dpkg-deb/extract.c \
+     ../dpkg-deb/info.c \
+     ../dpkg-deb/main.c \
+     ../dpkg-split/info.c \
+     ../dpkg-split/join.c \
+     ../dpkg-split/main.c \
+     ../dpkg-split/queue.c \
+     ../dpkg-split/split.c \
+     ../utils/start-stop-daemon.c \
+     ../utils/update-alternatives.c \
+     ../utils/update-alternatives.polkit.in
diff -Naurp dpkg-1.20.7.1-orig/po/pt_BR.gmo dpkg-1.20.7.1/po/pt_BR.gmo
--- dpkg-1.20.7.1-orig/po/pt_BR.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/pt_BR.gmo	2021-06-09 18:25:15.658504503 -0500
@@ -0,0 +1,305 @@
+����L�!?�!a"=c"&�"-�".�"%#.6#e# �#4�#�#5�#-)$.W$0�$1�$$�$4%/C%s%(�%$�%�%�%:&6T&1�&1�&!�&(':'F'e')}'9�'.�''(&8(3_(5�(�(�(�(�(�()$)3)H)Y)h)-)H�)Q�)AH*e�*f�*7W+<�+B�+,&,
A, O,p,5�,1�,�,-#-!@-b-K-5�--.!/.Q.5k.�.,�..�../D/Hd/6�/(�/>
0L0�X0-1/1[F1g�1
+3"40943j41�4�4�4*�425�G5-�6/7]J7�7G�78�7,.8[8(z8:�8 �8-�8-9�E9�:��:��;�r<�==�=�> �>5�>,�>$?5?=?I?U?6b?!�?.�?,�?@%6@\@%{@"�@&�@�@A;A3YA�AA�A�A&B"2BEUB,�B"�B-�B5C,OCG|C�C*�C"
D0DJD"bD�D�D*�DJ�DE"*EMEeE-�E)�E%�EF!F)6F`FF!�F!�F�F%�F%%GKGhG!}G�G �G-�G#H+/H%[H$�H�H �H�H:�H1IKIgI�I$�I�I�I�IJ'J?J!_J�J5�J �J2�J%*KPK0pK*�K/�K6�KV3L.�L(�L+�L)M48M4mM;�M<�M:N7VN0�N;�N?�N$;OA`O$�O!�O�OcPkP:�P<�PQ'
Q45Q)jQ�Q	�Qk�Q/!R"QR^tR@�R!S6SPShSO�S8�S*
+T5T7MT5�T!�T�T�T5U"FU4iU
�U �U%�UG�U?;V#{V7�V2�VY
+WfdW4�WFX1GX;yX�X.�X.Y 2YDSY�Y&�Y-�YZ.Z7ZSZhZ)Z�Z&�Z�Z[H[0a[6�[4�[�[%\%D\j\+\+�\4�\F]@S],�]R�]'^	<^ZF^4�^2�^	_G%_Ym_+�_%�_1`+K`Nw`3�`*�`%a2?a+ra,�a�a"�a$	b*.bYb*ub&�b3�b4�b50c)fc,�cD�c*d4-d&bd#�d#�d%�d(�d. e9Oe'�e*�e.�ef!(f4Jf4f[�f,g4=g#rg,�g/�g+�g-hMhhh2�h&�hB�h.i1Li3~i*�i6�i&j4;j1pj�j�j"�j�j
k(!kJkSfkM�k(l"1lTlll`tl��lDtnv�nC0o(to/�o4�op5pLp(lp>�p"�p9�p81q:jq/�q4�q&
+r;1r5mr�r.�r*�r"s%7sA]s=�s5�s8t"Lt)ot�t�t!�t=�t>"u,au9�u+�u.�u/#vSvWvdv{v�v�v
�v�v�v�v�v1wY6wZ�wI�wo5x��x:)y?dyH�y�y!z*z :z[z:wz>�z�z {6){)`{#�{M�{<�{;9|!u|�|:�|�|7}:C}'~}#�}L�}K~<c~J�~
+�~��~6�����������IӃ=�C[�����4��C��3�<(�9e�e���Q
+�@\�0��Έ6�/%�1U�?��ǉ������z��b��J��*����$��=я>�#N�r�z���
��:��.ې4
+�4?�%t�Q��1�Q�/p�0��&ђ#��\�Qy�5˓[�8]�B��9ٔI�F]�S��,��4%�-Z�Q��+ږ3�*:� e���*��˗�.�[�w�#����!Ϙ4�M&�,t�$��ƙ1ۙ!
�!/� Q�2r���*��.�@�[�m�>��̛/�$�9?�*y�0��՜��a%���*��!̝)�$�=�X�o���%��0��4�"'�HJ�&��B��$��"�=A�>�>��V���T�4ء/
�4=�3r�>��B�N(�Mw�OţD�9Z�M��P�13�Re�+��(�%
�x3�%��>ҦN�`�)l�7��,Χ��	�p�,��%��n�IO�.��ȩ��W"�Sz�@Ϊ�I.�Dx�)��!�	�;)�'e�A��Ϭ-ެ)�\6�K��)߭?	�/I�by�mܮ=J�S��?ܯv���2��2�$�U=���3��6߱�;�Z�y���5��"�L�U�q�O��<ճ=�UP�9��1�.�A�4V�:��QƵF�6_�4��d˶-0�^�et�=ڷ?�X�Ew�V��9�/N�4~�L��Q�<R�0����<ۺA�8Z���+��4޻=�-Q�=�+��>�=(�>f�-��2ӽP�>W�@��/׾,�(4�4]�1��6ĿA��-=�7k�?��"��(�8/�8h�l��2�CA�,��3��A��8(�9a�*��'��c��;R�N��C��3!�>U�2��4��)��8&�5_���&��.��� �1:�"l�d��W��:L�+������w��3W{CM��rX#.v�0�v�&���)+G�orY�U`�1T:��6�dqA���`�a�X\6�����2_N��=yS����D@���hA�d����p��[������D�7B�Ii	�,f�Ue~"ER����k�<�:2�V;�|�x)@�[�3T,�/F0
+<�7s���u'R]�^�9PP�q�QQi�?�I��;Kb�!�J}��bL/�(�
+e���zjE�c���HBc�x$�|p%Zl-�^t Lz�{8.��S���*~W��8�$�n�o]ZK������un_9My�V���5t?wg*!�	l����'�O&����>���G�m�H(�
>���gh#f�m�5j����Y���\�+%w4FkJas��=�� �1"O
�CN�}-�4
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s to be configured is %s.
+ %d in %s:  %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+%s breaks %s%s conflicts with %s%s depends on %s%s enhances %s%s pre-depends on %s%s recommends %s%s suggests %s'%s' clashes with '%s''%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix; however:
+<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<package status and progress file descriptor>Authenticating %s ...
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NamePackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want Processing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+The following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Version[default=N][default=Y][no default]archive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerawaiting trigger processing by another packagebroken due to failed removal or installationbroken due to postinst failurecan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)couldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdiversion by %s from: %s
+diversion by %s to: %s
+divert-to may not contain newlinesdiverted by %s to: %s
+done
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesempty trigger names are not permittedepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror opening conffiles fileerror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind trigger interest file '%.250s'failed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to write details of '%.50s' to '%.250s'fgets gave an empty string from '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefork failedillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal pending trigger name '%.255s': %sinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinvalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'link %s is both primary and slavelocal diversion from: %s
+local diversion to: %s
+locally diverted to: %s
+maintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentspackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage diverts others to: %s
+package has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage may not contain newlinespackage name has characters that aren't lowercase alphanums or '-+.'part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepassed
+pre-dependency problem - not installing %.250spriority must be an integerread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package fileremoval of %.250srename involves overwriting '%s' with
+  different file '%s', not allowedrequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave link same as main link %ssource file '%.250s' not a plain filestatoverride file contains empty linestripping trailing /subprocess %s returned error exit status %dsyntax error in file triggers file '%.250s'target is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving uptoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers looping, abandonedtrying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)unable to (re)open input part file '%.250s'unable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to seek to start of %.250s after paddingunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to stat %s '%.250s'unable to stat '%.250s'unable to stat current installed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat triggers deferred file '%.250s'unable to truncate for updated status of '%.250s'unable to write new triggers deferred file '%.250s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywarningyou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.13
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:52+0200
+Last-Translator: Felipe Augusto van de Wiel (faw) <faw@debian.org>
+Language-Team: Brazilian Portuguese <debian-l10n-portuguese@lists.debian.org>
+Language: pt_BR
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n > 1);
+
+ gatilhos dos pacotes pendentes que são ou podem ser insolúveis:
+
+O arquivo de configuração '%s' não existe no sistema.
+Instalando novo arquivo de configuração como você pediu.
+     A versão no pacote é a mesma que a da última instalação.
+     não é um arquivo simples  %.255s
+  %.250s (versão %.250s) está presente e %s.
+  %.250s (versão %.250s) está para ser instalado.
+  %.250s está %s.
+  %.250s está instalado, mas sua versão é %.250s.
+  %.250s não está instalado.
+  %.250s está para ser desconfigurado.
+  %.250s está para ser instalado, mas sua versão é %.250s.
+  %.250s está para ser removido.
+  %.250s está desempacotado, mas nunca foi configurado.
+ %.250s está desempacotado, mas sua versão é %.250s.
+  a versão mais recente configurada de %.250s é %.250s.
+  %.250s fornece %.250s e está presente e %s.
+  %.250s fornece %.250s e está para ser instalado.
+  %.250s fornece %.250s mas está %s.
+  %.250s fornece %.250s mas está para ser desconfigurado.
+  %.250s fornece %.250s mas está para ser removido.
+  %s (%s) fornece %s.
+  Pacote %s aguarda processamento de gatilho.
+  Pacote %s não está configurado ainda.
+  Pacote %s não está instalado.
+  Pacote %s está para ser removido.
+  Pacote %s, o qual fornece %s aguarda processamento de gatilho.
+  Pacote %s, o qual fornece %s ainda não está configurado.
+  Pacote %s, o qual fornece %s não está instalado.
+  Pacote %s, o qual fornece %s está para ser removido.
+  Versão de %s no sistema é %s.
+  Versão de %s a ser configurada é %s.
+ %d em %s:  %s (%s) quebra %s e é %s.
+ %s (não é um arquivo simples)
+ ==> Mantendo arquivo de configuração antigo como padrão.
+ ==> O distribuidor do pacote lançou uma versão atualizada.
+ ==> Usando arquivo atual como você pediu.
+ ==> Usando novo arquivo de configuração como padrão.
+ ==> Usando novo arquivo como você pediu.
+ A ação padrão é instalar a nova versão.
+ A ação padrão é manter sua versão atual.
+ e  depende de %s (sub-processo): %s
+%s quebra %s%s conflita com %s%s depende de %s%s melhora %s%s pré-depende de %s%s recomenda %s%s sugere %s'%s' conflita com '%s'campo '%s', nome de pacote inválido '%.255s': %scampo '%s', nome de pacote faltando, ou lixo no lugar em que se esperava o nome do pacotecampo '%s', referência a '%.255s':
+ '%c' está obsoleto, em seu lugar use '%c=' ou '%c%c'campo '%s', referência a '%.255s':
+ relacionamento de versões ruim %c%ccampo '%s', referência a '%.255s':
+ combinação exata implícita com o número da versão, sugere-se usar '='campo '%s', referência a '%.255s':
+ valor da versão começa com caractere não-alfanumérico, sugere-se a adição
+ de um espaçocampo '%s', referência a '%.255s': versão não terminadacampo '%s', erro de sintaxe após referência a pacote '%.255s'(Percebendo desaparecimento de %s, que foi completamente substituído).
+(Lendo banco de dados ... (nenhuma descrição disponível), gerou um coreopção -%c não aceita um valoropção -%c aceita um valor--%s --pending não aceita argumento que não seja opção--%s --recursive precisa de ao menos um caminho como argumento--%s precisa de <nome>--%s precisa de <nome> <caminho>--%s precisa de um nome de arquivo .deb como argumento--%s precisa de um argumento <diretório>--%s precisa de um único argumento--%s precisa de um diretório-alvo.
+Talvez você devesse usar dpkg --install?--%s precisa de ao menos um arquivo de pacote como argumento--%s precisa de pelo menos um nome de pacote como argumentoopção --%s não aceita um valoropção --%s aceita um valor--%s aceita no máximo dois argumentos (.deb e diretório)--%s não aceita argumentos--%s aceita somente um argumento (nome do arquivo .deb)--auto requer exatamente um arquivo parcial como argumento--auto requer o uso da opção --outputmá relação em --compare-versions--compare-versions aceitam três argumentos: <versão> <relação> <versão>--search precisa de pelo menos um padrão de nome de arquivo como argumento--split necessita de um nome de arquivo fonte como argumento--split aceita no máximo um nome de arquivo fonte e um prefixo de destino; porém:
+<deb> é o nome de arquivo de um arquivo no formato Debian.
+<carq> é o nome de um componente de arquivo administrativo.
+<ccampo> é o nome de um campo no arquivo 'control' principal.
+<estado do pacote e progresso do descritor de arquivo>Autenticando %s ...
+Comandos:
+  --check-supported                Checa se o dpkg em execução tem suporte a
+                                   gatilhos.
+
+Comandos:
+  -s|--split <arquivo> [<prefixo>]      Divide um arquivo.
+  -j|--join <parte> <parte> ...         Junta partes.
+  -I|--info <parte> ...                 Exibe informação sobre uma parte.
+  -a|--auto -o <completo> <parte>       Auto-acumular partes.
+  -l|--listq                            Lista peças que não combinam.
+  -d|--discard [<nome-do-arquivo> ...]  Descarta peças que não combinam.
+
+Operadores de comparação para --compare-versions são:
+  lt le eq ne ge gt       (trata versão vazia como anterior a qualquer
+                            outra versão);
+  lt-nl le-nl ge-nl gt-nl (trata versão vazia como posterior a qualquer
+                            outra versão);
+  < << <= = >= >> >       (somente para compatibilidade com a sintaxe do
+                            arquivo de controle).
+
+Debian %s versão %s.
+Mecanismo ("backend") de repositório de pacotes Debian '%s' versão %s.
+Programa de gerenciamento de pacotes Debian '%s' versão %s.
+Ferramenta de divisão/junção de pacote Debian '%s'; versão %s.
+Excluído %s.
+DescriçãoErros foram encontrados durante o processamento de:
+Arquivo '%.250s' não é parte de um arquivo em múltiplas partes.
+Sintaxe de formato:
+  Um formato é uma string que será gerada para cada pacote. O formato pode
+  incluir as sequências de escape padrão \n (nova linha), \r (retorno de
+  carro) ou \\ (barra invertida simple). Informação de pacotes podem ser
+  incluídas inserindo referências variáveis ao campos do pacote usando a
+  sintaxe ${variável[;tamanho]} (${var[;width]}). Campos serão alinhados à
+  direita a menos que o tamanho seja negativo, neste caso o alinhamento à
+  esquerda será usado.
+Instalando nova versão do arquivo de configuração %s ...
+Arquivos lixo deixados para trás no diretório "depot":
+Mais de uma cópia do pacote %s foi desempacotada
+ nesta execução! Configurando-o somente uma vez.
+NomePacote %s está sendo retido, não vou tocá-lo. Use --force-hold para sobrepor.
+Pacote %s listado mais de uma vez, processando somente uma vez.
+Pacote '%s' não contém quaisquer arquivos (!)
+Pacotes ainda não remontados:
+Parte %d do pacote %s preenchida (continua precisando Processamento parou porque havia muitos erros.
+Informação registrada sobre %s a partir de %s.
+Substituindo informações de pacotes disponíveis, usando %s.
+Configurando %s (%s) ...
+Os pacotes a seguir estão aguardando processamento de gatilhos que eles
+ativaram em outros pacotes. Este processamento pode ser executado usando
+dselect ou dpkg --configure --pending (ou dpkg --triggers-only):
+Os pacotes a seguir estão bagunçados devido a sérios problemas durante
+a instalação, e precisam ser reinstalados para que eles (e quaisquer
+pacotes que dependam dele) funcionem corretamente:
+Os pacotes a seguir estão apenas meio configurados, provavelmente devido a
+problemas ao configurá-los pela primeira vez. A configuração deve ser feita
+novamente usando dpkg --configure <pacote> ou a opção no menu do dselect:
+Os pacotes a seguir estão apenas meio instalados, devido a problemas durante
+a instalação, que provavelmente estará completa se você tentar executá-la
+novamente; os pacotes podem ser removidos com o dselect ou dpkg --remove:
+Os pacotes a seguir foram disparados por gatilhos, mas o processamento de
+gatilhos ainda não terminou. O processamento de gatilhos pode ser executado
+usando dselect ou dpkg --configure --pending (ou dpkg --triggers-only):
+Os pacotes a seguir foram desempacotados mas ainda não foram configurados.
+Eles precisam ser configurados usando dpkg --configure ou a opção do menu
+do dselect de configuração para que funcionem:
+Digite 'exit' quando terminar.
+Digite dpkg-deb --help para ajuda sobre manipulação de arquivos *.deb;
+Digite dpkg --help para ajuda sobre instalação e desinstalação de pacotes.Digite dpkg-split --help para ajuda.Digite dpkg-trigger --help para ajuda sobre este utilitário.Atualizando informações de pacotes disponíveis, usando %s.
+Uso: %s [<opção> ...] <comando>
+
+Versão[padrão=N][padrão=Y][sem padrão]arquivo continha objeto '%.255s' de tipo desconhecido 0x%xarquivo não possui novas linhas no cabeçalhoprocessamento de gatilhos em espera por outro pacotequebrado devido a falha na remoção ou instalaçãoquebrado devido a falha no "postinst"não foi possível executar "mmap" no arquivo de informações do pacote '%.255s'não foi possível remover script "postrm" antigonão foi possível executar "stat" no arquivo de informações do pacote '%.255s'não foi possível abrir '%.255s' (em '%.255s')não é possível abrir arquivo parcial '%.250s'não foi possível ler diretório infonão foi possível remover '%.250s'não foi possível remover antigo arquivo de configuração de backup '%.250s' (de '%.250s')não foi possível remover arquivo de configuração antigo '%.250s' (= '%.250s')não foi possível remover a antiga lista de arquivosnão foi possível satisfazer as pré-dependências para %.250s (requerido devido a %.250s)não foi possível fazer vasculhar o diretório '%.255s'não foi possível vasculhar diretório de atualizações '%.255s'não foi possível executar "stat" '%.255s' (em '%.255s')caractere '%c' não permitido (apenas letras, dígitos e caracteres '%s')arquivo de configuração ("conffile") '%.250s' não aparece no pacotearquivo de configuração ("conffile") '%.250s' não permite a execução de "stat"ações conflitantes -%c (--%s) e -%c (--%s)desvios conflitantes envolvendo '%.250s' ou '%.250s'pacotes conflitantes - não instalando %.250sdiretório de controle possui permissões ruins %03lo (devem ser >=0755 e <=0755)não foi possível abrir '%i' para "stream"problemas de dependência - deixando desconfiguradoproblemas de dependência - não removendodesviado por %s a partir de: %s
+desviado por %s para: %s
+desviar-para não pode conter novas linhasdesviado por %s para: %s
+feito
+gatilho em espera duplicado no pacote '%.255s'arquivo de gatilho interessados duplicado para o arquivo chamado '%.250s' e pacote '%.250s'caminho %s duplicadogatilho pendente duplicado '%.255s'ligação escrava %s duplicadavalor duplicado para o campo '%s'valor duplo para campo definido pelo usuário '%.*s'string vazia vinda de "fgets" ao ler arquivos de configuração ("conffiles")nomes de gatilho vazios não são permitidosépoca em versão não é um númeroerro fechando %.250serro ao fechar arquivo de configuração '%.255s'erro fechando/escrevendo '%.255s'erro criando dispositivo '%.255s'erro criando diretório '%.255s'erro criando ligação fixa ("hard link") '%.255s'erro criando pipe '%.255s'erro criando ligação simbólica '%.255s'erro ao se certificar que '%.250s' não existeerro abrindo arquivo de arquivos de configuração ("conffiles")erro lendo %.250serro lendo %s de arquivo %.255serro lendo arquivo de arquivos de configuração ("conffiles")erro lendo do "pipe" dpkg-deberro lendo arquivo de gatilhos adiados '%.250s'erro estabelecendo posse de '%.255s'erro estabelecendo posse da ligação simbólica '%.255s'erro estabelecendo permissões de '%.255s'erro estabelecendo registros de data de '%.255s'erro tentando abrir %.250serro não pegando sinal %s: %s
+erro escrevendo '%s'erro escrevendo para stderr, descoberto antes do prompt do arquivo de configuração ("conffile")falhou ao alocar memóriafalhou ao mudar para o diretório '%.255s'falhou ao mudar para o diretóriofalhou ao executar "chroot" para '%.250s'falhou ao fechar após ler: '%.255s'falhou ao criar diretóriofalhou ao criar "pipe"dup para fd %d falhoudup para std%s falhoufalhou ao executar "fstat" no arquivofalhou ao executar "fstat" no arquivo de desviosfalhou ao executar "fstat" no arquivo "statoverride"falhou ao abrir arquivo de desviosfalhou ao abrir arquivo de informações do pacote '%.255s' para leiturafalhou ao abrir arquivo "statoverride"falhou ao abrir arquivo de lista de gatilhos interessados '%.250s'falhou ao ler '%.255s' (em '%.255s')falhou ao ler arquivo '%.255s'falhou ao remover arquivo de atualização incorporado %.255sfalhou ao remover meu próprio arquivo de atualização %.255sfalhou ao retroceder arquivo de gatilhos interessados '%.250s'falhou ao executar "stat" ("dereference") para ligação simbólica existente '%.250s'falhou ao executar "stat" ("dereference") no novo alvo de ligação simbólica proposto '%.250s' para ligação simbólica '%.250s'falhou ao escrever detalhes de '%.50s' para '%.250s'fgets deu uma string vazia a partir de '%.250s'campo de nome '%.*s' precisa ser seguido de vírgulaarquivo '%.250s' está corrompido - %.250s faltandoarquivo '%.250s' está corrompido - checksum md5 ruim '%.250s'arquivo '%.250s' está corrompido - digito ruim (código %d) em %sarquivo '%.250s' está corrompido - magic ruim no final do primeiro cabeçalhoarquivo '%.250s' está corrompido - "magic" ruim no fim do segundo cabeçalhoarquivo '%.250s' está corrompido - caracter de preenchimento ruim (código %d)arquivo '%.250s' está corrompido - nova linha faltando após %.250sarquivo '%.250s' está corrompido - nulos na seção infoarquivo '%.250s' está corrompido - segundo membro não é um membro de dadosarquivo '%.250s' está corrompido - tamanho errado para o número parcial citadoarquivo '%.250s' está corrompido - muito pequenoarquivo '%.250s' está corrompido - número errado de partes para tamanhos citadosarquivo '%.250s' não é um arquivo parcialarquivo '%s' não é um arquivo parcial
+arquivo não pode conter novas linhasgatilhos de arquivo registram menções a nomes de pacotes ilegais '%.250s' (para interesse no arquivo '%.250s'): %.250snome de arquivo "%s" não é absolutoarquivos '%.250s' e '%.250s' não são partes do mesmo arquivoarquivo com lista de arquivos do pacote '%.250s' contém nome de arquivo vaziofork falhounome de pacote ilegal na linha %d: %.250snome de pacote ilegal no gatilho em espera '%.255s': %snome de gatilho pendente ilegal '%.255s': %sinstalação de %.250sinstaladoinstalando %.250s quebrará %.250s, e
+ a desconfiguração não é permitida (--auto-deconfigure poderá ajudar)instalar %.250s quebrará software existenteinteiro inválido para --%s: '%.250s'sintaxe inválida ou desconhecida no nome do gatilho '%.250s' (no interesse do gatilho para o pacote '%.250s')nome de pacote inválido '%.250s' no arquivo de gatilhos adiados '%.250s'ligação %s é tanto primário quanto escravodesvio local a partir de: %s
+localmente desviado para: %s
+localmente desviado para: %s
+script de mantenedor '%.50s' possui permissões ruins %03lo (devem ser >=0555 e <=0775)script de mantenedor '%.50s' não é um arquivo simples ou uma ligação simbólicascript de mantenedor '%.50s' não permite a execução de "stat"pode não ser uma string vaziaincompatibilidade em desvio-para
+  na remoção de '%s'
+  encontrado '%s'incompatibilidade em pacote
+  na remoção de '%s'
+  encontrado '%s'nome %s é tanto primário quanto escravonecessário uma opção de açãonova linha no campo nome '%.*s'novas linhas proibidas em arquivos update-alternatives (%s)sem informações de pacote em '%.255s'nenhum pacote chamado '%s' está instalado, não posso configurarnão instaladonão instalado mas a configuração permanecenada após vírgula em número de versãoversão antiga do pacote possui nome de arquivo info demasiadamente longo iniciando '%.250s'abertura do componente '%.255s' (em %.255s) falhou de maneira não esperadasem memória para nova entrada de limpezasem memória para nova entrada de limpeza com tantos argumentospacote %.250s já está instalado e configuradopacote %.250s não está pronto para configuração
+ não posso configurar (estado atual '%.250s')pacote %.250s não está pronto para processamento de gatilho
+ (estado atual '%.250s' sem gatilhos pendentes)arquitetura do pacote (%s) não combina com a do sistema (%s)pacote contém nome de arquivo de controle demasiadamente longo (iniciando '%.50s')informação de controle do pacote continha diretório '%.250s'remoção do diretório de informação de controle do pacote '%.250s' não disse que não se tratava de um diretóriopacote desvia outros para: %s
+pacote possui estado %s mas há gatilhos em esperapacote possui estado %s mas há gatilhos pendentespacote não pode conter novas linhasnome do pacote possui caracteres que não são alfanuméricos em caixa-baixa ou '-+.'parte %d está faltandoarquivo parcial '%.250s' não é um arquivo simplestamanho da parcial é muito grande ou não é positivopassou
+problema de pré-dependência - %.250s não será instaladoprioridade deve ser um inteiroerro de leitura em %.250serro de leitura em '%.250s'erro de leitura no arquivo de configuração '%.255s'erro de leitura na entrada padrãoerro de leitura em stdin no prompt do arquivo de configuração ("conffile")arquivo de pacote remontadoremoção de %.250srenomear envolve sobrescrever '%s' com
+  arquivo diferente '%s', não permitidoa operação solicitada requer privilégios de superusuárioprocurei, mas não achei pacotes (arquivos casando com *.deb)muitas entradas de informação do pacote foram encontradas, somente uma é permitidaligação escrava é a mesma que a ligação principal %sarquivo fonte '%.250s' não é um arquivo simplesarquivo "statoverride" contém linha em brancoremovendo / do finalsub-processo %s retornou estado de saída de erro %derro de sintaxe no arquivo de gatilhos de arquivo '%.255s'alvo é um diretório - não é possível pular a checagem do arquivo de controleexistem diversas versões da parte %d - pelo menos '%.250s' e '%.250s'não há script na nova versão do pacote - desistindolinha muito longa ou nova linha faltando em '%.250s'erro de sintaxe no arquivo de gatilhos interessados '%.250s'; nome de pacote ilegal '%.250s': %.250snome de gatilho contém caracteres inválidosdisparado por gatilhoarquivo de gatilhos ci '%.250s' contém sintaxe de gatilho ilegal no nome do gatilho '%.250s': %.250sarquivo de gatilhos ci contém diretiva desconhecida '%.250s'arquivo de gatilhos ci contém diretiva de sintaxe desconhecidagatilhos em "loop", abandonadotentando sobrescrever '%.250s', que é a versão desviada de '%.250s'tentando sobrescrever '%.250s', que é a versão desviada de '%.250s' (pacote: %.100s)impossível (re)abrir arquivo parcial de entrada '%.250s'impossível verificar a existência de '%.250s'impossível checar a existência do arquivo '%.250s'impossível executar "chown" da ligação simbólica de backup para '%.255s'impossível limpar a sujeira em torno de '%.255s' antes de instalar outra versãoimpossível fechar novo arquivo de gatilhos adiados '%.250s'impossível fechar estado atualizado de '%.250s'impossível criar '%.255s'impossível criar diretório de estado dos gatilhos '%.250s'impossível excluir arquivo de informações de controle '%.250s'impossível excluir arquivo "depot" acima usado '%.250s'impossível descartar '%.250s'impossível preencher %.250s com enchimentoimpossível executar "flush" %.250s após enchimentoimpossível executar "flush" do estado atualizado de '%.250s'impossível executar "fstat" no arquivo fonteimpossível executar "fsync" do estado atualizado de '%.250s'impossível instalar '%.250s' como '%.250s'impossível instalar arquivo info (supostamente) novo '%.250s'impossível instalar novo arquivo info '%.250s' como '%.250s'impossível instalar novo arquivo de gatilhos adiados '%.250s'impossível instalar nova versão de '%.255s'impossível instalar estado atualizado de '%.250s'impossível criar ligação de backup de '%.255s' antes de instalar nova versãoimpossível criar ligação simbólica de backup para '%.255s'impossível mover do caminho '%.255s' para instalar nova versãoimpossível abrir novo arquivo "depot" '%.250s'impossível abrir arquivo de saída '%.250s'impossível abrir arquivo fonte '%.250s'impossível abrir diretório de controle temporárioimpossível abrir arquivo de gatilhos ci '%.250s'impossível abrir arquivo de gatilhos adiados '%.250s'impossível abrir/criar novo arquivo de gatilhos adiados '%.250s'impossível ler o diretório "depot" '%.250s'impossível ler arquivo de gatilhos de arquivo '%.250s'impossível ler as "flags" do descritor de arquivos para %.250simpossível ler ligação '%.255s'impossível ler arquivo parcial '%.250s'impossível remover versão recém-extraída de '%.250s'impossível remover versão recém-instalada de '%.250s'não consigo remover versão recém-instalada de '%.250s' para permitir a reinstalação da cópia de backupimpossível remover arquivo info obsoleto '%.250s'impossível renomear novo arquivo "depot" de '%.250s' para '%.250s'impossível reabrir arquivo parcial '%.250s'impossível restaurar versão de backup de '%.250s'impossível executar "seek" no começo de %.250s após enchimentoimpossível definir a "flag" 'close-on-exec' para %.250simpossível definir permissões de execução em '%.250s'impossível executar "stat" em %s '%.250s'impossível executar "stat" em '%.250s'impossível executar "stat" no arquivo de configuração ("conffile") atualmente instalado '%.250s'impossível executar "fstat" em outro arquivo novo '%.250s'impossível executar "stat"'%.255s' restaurado antes de instalar outra versãoimpossível executar "stat" no arquivo de gatilhos adiados '%.250s'impossível truncar o estado atualizado de '%.250s'impossível escrever novo arquivo de gatilhos adiados '%.250s'impossível escrever estado atualizado de '%.250s'dado inesperado após pacote e seleção na linha %dfim de arquivo inesperado em %s em %.255sfim de linha inesperado após nome do pacote na linha %dfim de linha inesperado no nome do pacote na linha %dargumento desconhecido '%s'tipo de compressão desconhecido '%s'!opção de forçar/recusar '%.*s' desconhecidaopção desconhecida -%copção desconhecida --%sestado procurado desconhecido na linha %d: %.250sdesempacotado mas não configuradodiretório de atualizações contém arquivo '%.250s' cujo nome é muito longo (tamanho=%d, máx=%d)diretório de atualizações contém arquivos com nomes de tamanho diferentes (%d e %d)nome do campo '%.*s' definido pelo usuário é muito curtostring de versão possui espaços embutidosstring de versão está vaziaavisovocê deve especificar pacotes com seus próprios nomes, não pela citação dos nomes dos arquivos nos quais eles vêm
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/pt.gmo dpkg-1.20.7.1/po/pt.gmo
--- dpkg-1.20.7.1-orig/po/pt.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/pt.gmo	2021-06-09 18:25:15.613504434 -0500
@@ -0,0 +1,910 @@
+��V�"�|E�\?�\a�\ C]kd]��]��^&_=@_&~_�_-�`.�`a.'aVa ra4�a�a5�a-b.Hb0wb1�b$�b4�b/4cdcq|c(�c$d<d\d:|d6�d1�d1 e!Re2te(�e�e�e!�ef4fRfcf.rf�fS�fgg1g9Igm�g)�g:h9Vh.�h'�h&�hi3$i5Xi�i�iP�i\�ivOj[�jU"kxk�k�k�k�kZ�k*l;l�Jlm=/mmm�m-�m+�m�m)n5nDn�Yn=5pRsp1�pD�pL=qA�q'�q&�q(r'Dr+lr4�r!�r,�r9s-Vs�s#�s�s$�s
+t"'tJt!ht#�t�t�t�t�t�t"u2Bu1uu/�u'�u�u.vEv<`v�v-�vR�vH8wQ�wA�wexf{xI�x/,y7\y<�y7�y	z(zBEz�z�z�z
�z �z�z5{1K{@}{0�{�{|#|!>|`|}|K�|7�|5}-T}�}!�}�}'�}-~-.~ \~5}~�~ �~�~"!/"Q!t$�,�.�.�.F�u�H��6ހ(�>>�$}� ��Á�����
���Â#ڂ:��-9�g�x�����*��<ӄ#�-4�-b����%�2�5I���[u��ч\̋�)�g�
M�[�s�(��-���8��<8�.u���0��3�1 �R�_�z����0;�1l�*��Jɝ2��G�&�/�2C�Ev�V���5,�.b�-��+��/�
�%)�/O�*�&��!Ѣ+�B�]b���!ţM�5�2K��~��*�G§!
+�",�O�4n�.��2ү5�3;�o�G�8ǰ,�-�(L�u�z���G���3��)-�$W�:|�,��V� ;�\�*x�����&ȳ3�-#�+Q�?}�,��	���
+�*"�M�c� ��H������¶gu�jݷ�H��#�4�5&��\��$���u��&�A8�{z�!��,�*E�.p�������B� ��5��� 4�,U�$��.��>��*�;@�,|�#��L��>��Y�����;��"�u*����"y�������9��(��X$�3}�?��8��2*�1]�,��:��4��5,�4b�,��A��M�-T�����#�������� 1�1R�%��8��?��"#�BF�6����5��&�.9�!h�!��5�������*�>�S�	f�9p�.��#����,�J�$i�����%����%�8�-S�1������)��1�:D�?�&����=�7A�y�!��.��*��7�#G�k�"z�&������0��$�:3�n���@��+��;
�3I�}���A����&�-=�#k�0��;��0��(-�?V�)��-����"�� �6�#P�4t�E����
+�,!�"N�!q���$��5�� 
�8.�g�v�-��5��,��B&�Bi�+��G��$ � E�:f�;��3��=�O�h�&w�/����7��"�D@�c����2��*(�"S�3v�:��-��(�&<�c�}�����"����W�Y�(_�����=��*��J�b�"t�������-�� �5�)F�%p���#��@��@�'W���������������)&�P�o�!��!��#����%�%9�'_�,��������*	�'4�'\���!���� ��-��#'�#K�+o�%��$���� �#�;�T�g�"}�:����F��<�X�u�$���������#�<�T�!t�"��:����5� I�2j���%����0��*#�$N�/s���6��V��"@�(c���<��.��)�(2�*[�+����,��)��4%�3Z�2��4��;��<2�6o�:��7��@�0Z�;��?��$�A,�=n�>��$��0�!A�c�b~���c��c�:��<��=��_7�#��H����0�J�)`�)��+��+����$����� ��2�\��&�&:�'a� ��7��t��2W�-��'��4��.�)D�Gn�-����	���k$�/������>��%#�$I�#n�&��!����!��"�^?�@��&��"?[j!����(%Hn+�7�!�*(2[u����O�87*p����3�
%7@5x��|�
+T_m0�Gf)�!���3$R5w%���"�4!V!tC�=�%	o>	
�	 �	(�	
+%#
+7I
+�
+�
+I�
+.�
+6+!b��G�P�GM.�?�#
7(
#`
�
+�
2�
Yf]L�hMz&�K�3;=o��=�'4<(qF�1�;&Ov��%�/�2$8W-�-�.�.aJe� 3 @Da?��/&B-i7�����T.j���"��2
@U)l�&�"�"�" C6\��7�B�H?&�0�<�Om�:�6�%5$G4l��O�
++
+6A
+a%l�%�*��
+&7R+�!�M�$&4KF�@�% 6. 1e A� � ,� B !,c!#�!R�! "'("$P"	u"Z"4�"2#'B#j#�#.�#D�#G$YY$Q�$^%%d%+�%G�%/�%2.&%a&%�&1�&8�&+'ND'�'!�'3�'*(.(5H(~("�($�(2�(+)+@),l)�)�)"�)$�)*!0**R*}**�*0�*0�*&&+3M+4�+5�+)�+,,C,DU,*�,4�,�,-0-&I-#p-#�-%�-(�-..>6.9u.9�.1�."/'>/*f/.�/�/!�/�/(0(>04g04�0[�0,-14Z1#�1,�1"�1"2/&2/V2+�2+�2-�2*3&73!^3�3�3�3 �32�30&4&W4B~4#�4.�4525O5 h51�5�5�5!�536?6*_6�6�66�64�6,'7&T71{7 �7'�7.�7%84=81r8+�8#�8�8
+9"'9J9i9"�9�9�9�9��9��:h;!�;(�;�;#�;$<$5<(Z<�<:�<"�<#=S$=Mx=E�=>(%>(N>*w>:�>.�>0?"=?I`?�?4�?�?
+@(*@S@"k@�@�@�@�@�@�@BA`UA9�A�A'B#/BASB`�B��BN�D{�D!OE�qE�F��F/�GB�G(�G#H//I-_I�I1�I�I!�I3JFJ8bJ5�J2�J5K3:K)nK:�K4�KLz%L5�L+�L$M 'MKHMA�M9�M5N$FN?kN+�N�N�N0O7O#VOzO�O/�O
+�OG�O!P2P PP=qP��PG4Q@|Q>�Q;�Q<8R2uR�R/�R3�R"S&SZ3Sj�S��So�TUU]UsU�U�U�Ua�UV
0V�>V-WPKW�W�W7�W5�W"/X,RXX�X��X`�Zo�ZAS[N�[^�[SC\/�\'�\1�\-!]2O]9�]�]/�]=^.J^$y^*�^$�^*�^#_)=_#g_'�_)�_�_�_`(`&D`/k`V�`R�`<Ea-�a�a>�ab=bXb1vb_�bJc^ScB�c{�cqqdO�d03e:de@�e>�ef7:fDrf�f�f�f
gg2g:Ng=�g?�g@hHh"ah1�h,�h)�h%
ic3iF�iJ�i;)j#ej �j�j0�j=�j86k$ok9�k"�k%�kl 1l Rl!sl �l(�l-�l6
mCDm4�m#�mI�mL+n3xnA�n$�n!o5oTo[ojo��oBpSp.jp]�p8�q0r@rSrer.yrE�r4�rD#sFhs��sGtTt=it�td�u7v'	Uz$}�y��&�LC� ��4��2��B6�Hy�8��6�7I�@��ό����9��5�-�YH�D����*ϐ/��4*�R_�o��"�C@�,��=��/�1�Q�7`�/��Aȓ8
+�0C�2t�D��e�R�%W�O}�͕G��+������lW�+ġ$�?�/U�:��:��;��7�PP�?��1��,1�^�f�$x�V��
+��=��+=�(i�9��9̥H�,O�|�.��Ǧަ-�;�DX�4��Pҧ9#�
+]�$h���F���#�&+�HR�������q�m1�i���	���1�3 ��T��2���vӰ-J�Px��ɱ'U�1}�5��8�'��F���%��@���&�DE�,��A��C��0=�Ln�.��1�a�L~��˸��x�:��Ӻ�ۺ�n�*\�����
��I��0��_(�:��EýA	�5K�7��0��@�>+�;j�>��5�A�V]�+������+�.@�o�	w�����9��,��?�GW�)��P��;�(V�F�1��6��)/�/Y�F��%�����4�O�k���N��8��(�"F�4i�$��*��!��5�CF�(��C�� ��=�@V���(��7��=�CS�J��-��#�K4�A����2��5�3J�T~�/���%�5<�"r���@����P�]�|�S��5��W!�Iy�-��'��M�*g�;��/��3��G2�Fz�7��-��M'�@u�9����*�%3�$Y�.~�>��N��';�c�*}�1��,��'�)/�IY�'��I���!$�,F�3s�/��F��J�2i�R��0��' �LH�F��:��G�_�{�<��D���Y.� ��U��z��z�=��5��+��>*�Ki�:��3��1$�V�p�����&����\��X�0_�����K��/�WC���%������!�:1�'l���,��0���*$�FO�E��@���!�?�$]�%��������4�� �"/�$R� w�,����&��*�23�3f�%��%��"��3	�*=�)h���!�� ����5�0;�l�/��'��&���!'�I�X�n���.��V��%�QE���!����!���/�D�Z�3p���#��(��&�F2� y�I��"��J�R�!c���C��D��,,�?Y���S����2��0����L��1L�8~�&��7��6�*M�8x�6��C��@,�Im�H��S�OT�J��R��AB�T��=��R�[j�8��X��VX�J��/��D*�-o�$��`��,#�zP�(��C��Q8�S��o��)N�[x���"��!�%�-C�-q�8��2����)��!�:�Y��k�f�4��4��.��(�@E����8�/R�)��8��3��.�rH�4����	�$�q6�0������I��0C*t)�-�)�$!,F-st�L*c����$�*%J'p,�%�0�,I%X;~�5�>Ncv���V�Q7<�����=
K+jD�<�+�C�	�!	8�	R�	!?
+.a
+�
+%�
+�
+�
+@.S8�1��%	'/EW1�8�E
DN
1�
��
F0U,�$�,�@FcN�;�C%Rx�[�^]j>�D)L?v'�#�417dip�T?i�V�-Uc�:�J"$m"�H��A0Wr�C�K?&� �'�+�8'5`6�I�68N4�6�h�b\&��&�]J{%��	%469kL� �%!eG6�
+�"�"*5`Cu��6�#& @J 3� 5� $� !:8!s!�!H�!R�!U@".�"A�"P#jX#�#�#D�#F?$(�$�$+�$M�$%8%#^%^�%�%�%%&-&5=&s&-�&7�&�&�&'3)';]'>�'(�'](&_(S�(F�(9!)+[)3�)C�)K�)K*<e*N�*7�*/)+iY+)�+2�+( ,I,k],C�,D
-:R-!�-�-/�-K�-GH.V�.^�.cF/(�/B�/c0Dz0?�06�0B61Cy1Z�1H2\a2)�22�2H3:d3!�3<�3(�31'40Y4J�4K�4;!5C]5%�5#�52�536/R68�6<�60�6@)7Gj7<�72�7C"8Gf8H�84�8<,9i9Q�9@�9>:!Z:+|:(�:5�:6;2>;>q;;�;B�;`/<G�<K�<H$=$m=3�=D�=:>$F>3k>�>7�>8�>E0?Dv?t�??0@Hp@6�@:�@1+A)]AG�AI�AEB9_B@�BA�B;C2XC"�C)�C&�C4�CY4DD�D<�DTE8eEH�E1�E,F.FF2uF@�F!�F+G47GJlG*�G<�GH?H7XH;�H3�H*I9+I$eI*�I+�I�I8�I54J0jJ,�J�J'�J-K#:K&^K.�K�K�K�K�L��L(�M4�M1#N"UN$xN,�N+�N(�N,O@LO+�O1�Oi�ObUPS�PQ>*Q2iQ4�QL�Q4R8SR$�RQ�R	S6
SDS#dS.�S�S"�S�ST%-T"STvT|TW�Tz�TCcU�U-�U+�UHVsdVb?�i?��^��������C���IO���'��)~%8H���Y=	\�:��V)�X������+�z�X�:��G����B�<Z���%�o\"�%N�9������0����Ux�$����� =��.���p�|6v�������������y�m^��Z��_h(�����h{-le����c�������j��>?�C����E��,�y��}C&�
+��;����1p:��M0��KF0HFw�uS]��=�� ��$V.�:���L[3��n����J�/��W�X���1�n`8�I�dx5=�����	��a���Uy79�?1��
+n���[a�#)J�GT��5t=v]��mY�@�r)��q��t��BPf QER��a'��N��H�K>��\"������>�\�r+�5�L���.�<����h�6�@��|	0�N�>�+}�D�
YVosH��A*����V!w�QO#�������u���A9&������Al�U6X�3�lp����z� �D��#�Ac�l6`�&�L�~�����Cm�g#1��e���1(�Z�����D���wn�����g�.w`'�-V�t��q��2���C��g#S���A�9���J7�p^���z$�I�����E�J���2�"%�v	8�k�9�2�:�������N*�R����<���
�[�hG��j3���+�E+
+�@�4�K_c�Y{�W�@5�W4-2�f�O
�	��MG���c��d(o��&�s�TTTe�8�SxrQ?��M���3^��.;�k���_I,u'I�K��*O�L
+_���d���]�i������$��Bs!Sf���M��OutD�;(q�gb�x�m;jbE6*�7LiQ��,�/�R,�
�K�4��P������������|HB��
+q��[�yF��oPj���74/��Z@���'�/D��,��� �M��a3R��F�Fs�$���;�&!8��2�b{N�)-�Q��R�U����>�e7�~�W]!���
(�!��`/5��4����z��PJ�"��r0��<iv*�G"�k���%PU��-��STk}|{B��f�}�~d�<��
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Currently enabled options:
+ %s
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on  new Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd bytes.
+ old Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd, main archive=%jd.
+%d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not a regular file%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s subprocess failed with wait status code %d%s subprocess returned error exit status %d%s subprocess was interrupted%s subprocess was killed by signal (%s)%s%s suggests %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%.255s' is not a Debian format archive'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field present for package with inappropriate '%s' field'%s' field value '%.250s''%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version '%s''%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' is not a valid architecture name in '%s' field: %s'%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one <archname> argument--%s takes one <pkgname> argument--%s takes one <trigname> argument--%s takes one <version> argument--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Authentication is required to run update-alternativesCommands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -i|--install       <.deb file name>... | -R|--recursive <directory>...
+  --unpack           <.deb file name>... | -R|--recursive <directory>...
+  -A|--record-avail  <.deb file name>... | -R|--recursive <directory>...
+  --configure        <package>... | -a|--pending
+  --triggers-only    <package>... | -a|--pending
+  -r|--remove        <package>... | -a|--pending
+  -P|--purge         <package>... | -a|--pending
+  -V|--verify [<package>...]       Verify the integrity of package(s).
+  --get-selections [<pattern>...]  Get list of selections to stdout.
+  --set-selections                 Set package selections from stdin.
+  --clear-selections               Deselect every non-essential package.
+  --update-avail [<Packages-file>] Replace available packages info.
+  --merge-avail [<Packages-file>]  Merge with info from file.
+  --clear-avail                    Erase existing available info.
+  --forget-old-unavail             Forget uninstalled unavailable pkgs.
+  -s|--status [<package>...]       Display package status details.
+  -p|--print-avail [<package>...]  Display available version details.
+  -L|--listfiles <package>...      List files 'owned' by package(s).
+  -l|--list [<pattern>...]         List packages concisely.
+  -S|--search <pattern>...         Find package(s) owning file(s).
+  -C|--audit [<package>...]        Check for broken package(s).
+  --yet-to-unpack                  Print packages selected for installation.
+  --predep-package                 Print pre-dependencies to unpack.
+  --add-architecture <arch>        Add <arch> to the list of architectures.
+  --remove-architecture <arch>     Remove <arch> from the list of architectures.
+  --print-architecture             Print dpkg architecture.
+  --print-foreign-architectures    Print allowed foreign architectures.
+  --assert-<feature>               Assert support for the specified feature.
+  --validate-<thing> <string>      Validate a <thing>'s <string>.
+  --compare-versions <a> <op> <b>  Compare version numbers - see below.
+  --force-help                     Show help on forcing.
+  -Dh|--debug=help                 Show help on debugging.
+
+Commands:
+  -s, --status [<package>...]      Display package status details.
+  -p, --print-avail [<package>...] Display available version details.
+  -L, --listfiles <package>...     List files 'owned' by package(s).
+  -l, --list [<pattern>...]        List packages concisely.
+  -W, --show [<pattern>...]        Show information on package(s).
+  -S, --search <pattern>...        Find package(s) owning file(s).
+      --control-list <package>     Print the package control file list.
+      --control-show <package> <file>
+                                   Show the package control file.
+  -c, --control-path <package> [<file>]
+                                   Print path for package control file.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not chroot into maintainer script environmentDo not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnore a missing stat override when removing itIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Options:
+  --package <package>      name of the package whose copy of <file> will not
+                             be diverted.
+  --local                  all packages' versions are diverted.
+  --divert <divert-to>     the name used by other packages' versions.
+  --rename                 actually move the file aside (or back).
+  --no-rename              do not move the file aside (or back) (default).
+  --admindir <directory>   set the directory with the diversions file.
+  --instdir <directory>    set the root directory, but not the admin dir.
+  --root <directory>       set the directory of the root filesystem.
+  --test                   don't do anything, just demonstrate.
+  --quiet                  quiet operation, minimal output.
+  --help                   show this help message.
+  --version                show the version.
+
+Options:
+  -v, --verbose                    Enable verbose output.
+  -D, --debug                      Enable debugging output.
+      --showformat=<format>        Use alternative format for --show.
+      --deb-format=<format>        Select archive format.
+                                     Allowed values: 0.939000, 2.0 (default).
+      --nocheck                    Suppress control file check (build bad
+                                     packages).
+      --root-owner-group           Forces the owner and groups to root.
+      --[no-]uniform-compression   Use the compression params on all members.
+  -z#                              Set the compression level when building.
+  -Z<type>                         Set the compression type used when building.
+                                     Allowed types: gzip, xz, none.
+  -S<strategy>                     Set the compression strategy when building.
+                                     Allowed values: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite an existing stat override when adding itOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Run update-alternatives to modify system alternative selectionsSelecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use MAC based security if availableUse dpkg --contents (= dpkg-deb --contents) to list archive files contents.
+Use dpkg --info (= dpkg-deb --info) to examine archive files.
+Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenUseful environment variables:
+Validatable things: pkgname, archname, trigname, version.
+
+VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %salternatives ('|') not allowed in '%s' fieldambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchitecture name '%s' is invalid: %sarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' is not a regular filearchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive details '%s' field not allowed in status filearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'boolean (yes/no) '%s' field: %sbroken due to failed removal or installationbroken due to postinst failurebuilding an unknown package in '%s'.building package '%s' in '%s'.can't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot access archive '%s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get package %s filesystem last modification timecannot get security labeling handlecannot open %scannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open directory '%s'cannot open file %scannot open security status notification channelcannot read %scannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set primary group ID to rootcannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot stat pathname '%s'cannot write file %s into the pagercannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile file contains an empty lineconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file '%s' for package '%s' is missing valuecontrol file '%s' for package '%s' is missing value separatorcontrol file contains %ccontrol membercorrupt info database format file '%s'corrupted filesystem tarfile in package archivecould not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdeprecated --%s option; use --%s insteaddiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+diverting file '%s' from an Essential package with rename is dangerous, use --no-renamedone
+downgrading %.250s from %.250s to %.250sdpkg database lockdpkg frontend lockdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty archive details '%s' fieldempty field nameempty string from fgets reading conffilesempty trigger names are not permittedempty value for '%s' fieldend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is emptyepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while cleaning uperror while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not a Debian binary archive (try dpkg-split?)file '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedfirst (want) word in '%s' field: %sforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentformat version with too big major componentformat version with too big minor componentfound unknown packages; this might mean the available database
+is outdated, and needs to be updated through a frontend method;
+please see the FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>generated corrupt ar header for '%s'group '%s' does not existhas invalid value '%.50s'has trailing junkheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalled %s package %s scriptinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal errorinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid package name in '%s' field: %sinvalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid tar header checksuminvalid tar header checksum fieldinvalid tar header gid fieldinvalid tar header mtime fieldinvalid tar header size fieldinvalid tar header uid fieldinvalid tar header with empty name fieldinvalid trigger name '%.250s': %.250sis missing a valueline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slaveloading control file '%s' for package '%s'loading files list file for package '%s'local diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing '%s' fieldmissing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnew %s package %s scriptnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no 'control' file in control archive!no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot enough privileges to change root directory with --force-not-root, consider using --force-script-chrootless?not installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '%s' field usedobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete compression type '%s'; use xz insteadobsolete compression type '%s'; use xz or gzip insteadobsolete force/refuse option '%s'obsolete option '--%s'old %s package %s scriptold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoutside error context, abortingoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s (%s) with field '%s: %s' is not co-installable with %s which has multiple installed instancespackage %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package architecture is missing or emptypackage contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has '%s' field but is architecture '%s'package has '%s' field but is missing architecturepackage has status %s and has conffiles, forgetting thempackage has status %s but no triggers awaitedpackage has status %s but no triggers pendingpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name '%s' is invalid: %spackage name has characters that aren't lowercase alphanums or '-+.'package not in status nor available database at line %d: %.250spackage signature verificationpackage version numberpager to show filepart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)partially read tar headerpassed
+pastepath may not contain newlinesplease specify --no-rename explicitly, the default will change to --rename in 1.20.xpre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %squadstate (foreign/allowed/same/no) '%s' field: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerequired read/write access to the dpkg database directory %srequired write access to dpkg database directory '%s' for bulk available updaterevision number is emptyrm command for cleanuproot or empty directory listed as a conffile in '%s' fieldsearched, but found no packages (files matching *.deb)second (error) word in '%s' field: %ssection<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesshowing package list on pagerskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filesyntax error in triggers deferred file '%.250s' at line %d character %zd '%s'takes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthird (status) word in '%s' field: %sthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too few values in archive details '%s' field (compared to others)too many errors, stoppingtoo many nested errors during error recoverytoo many values in archive details '%s' field (compared to others)too-long line or missing newline in '%.250s'treewalk root %s is not a directorytrigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name '%s' is invalid: %strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers database locktriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to access dpkg database directory '%s' for bulk available updateunable to access the dpkg database directory %sunable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to check lock file for dpkg database directory %sunable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create dpkg database lock file for directory %sunable to open/create dpkg frontend lock for directory %sunable to open/create new triggers deferred file '%.250s'unable to open/create triggers lock file '%.250s'unable to parse timestamp '%.255s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunexpected pre-existing pathname %sunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown system group '%s' in statoverride file; the system group got removed
+before the override, which is most probably a packaging bug, to recover you
+can remove the override manually with %sunknown system user '%s' in statoverride file; the system user got removed
+before the override, which is most probably a packaging bug, to recover you
+can remove the override manually with %sunknown tar header type '%c'unknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunrecoverable fatal error, abortingunsupported GNU tar header type '%c'unsupported PAX tar header type '%c'unsupported Solaris tar header type '%c'unsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has line starting with non-space '%c'value for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion '%s' has bad syntax: %sversion number does not start with digitversion number is emptyversion string has embedded spacesversion string is emptyversioned Provideswait for %s subprocess failedwait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingword in '%s' field: %syes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou do not have permission to lock the dpkg database directory %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.14
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2019-08-25 10:45+0100
+Last-Translator: Miguel Figueiredo <elmig@debianpt.org>
+Language-Team: Portuguese <traduz@debianpt.org>
+Language: pt
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: Lokalize 1.0
+Plural-Forms: nplurals=2; plural=(n != 1);
+
+ 'triggers' pendentes de pacotes que são ou poderão ser não solucionados:
+
+Ficheiro de configuração '%s', não existe no sistema.
+A instalar novo ficheiro de configuração conforme você pediu.
+
+Opções atualmente ativas:
+ %s
+
+As opções de depuração podem ser misturadas utilizanto o OR binário.
+Note que os significados e valores estão sujeitos a alterações.
+
+Use 'dpkg' para instalar e remover pacotes do seu sistema, ou 'apt' ou
+'aptitude' para uma gestão de pacotes amigável. Os pacotes descompactados
+com 'dpkg-deb --extract' serão incorrectamente instalados !
+
+AVISO - a utilização de opções marcadas com [!] pode danificar seriamente a
+sua instalação. As opções para forçar marcadas com [*] estão habilitadas por
+predefinição.
+     Não foi modificado desde a instalação.
+    A versão no pacote é a mesma que a da última instalação.
+     não é um ficheiro comum   %.255s
+   O que deseja fazer? As suas opções são:
+    Y ou I  : instalar a versão do pacote do maintainer
+    N ou O  : manter a versão actualmente instalada
+      D     : mostrar diferenças entre as versões
+      Z     : iniciar uma shell para examinar a situação
+  %.250s (versão %.250s) está presente e %s.
+  %.250s (versão %.250s) vai ser instalado.
+  %.250s é %s.
+  %.250s está instalado, mas é versão %.250s.
+  %.250s não está instalado.
+  %.250s vai ser desconfigurado.
+  %.250s vai ser instalado, mas é versão %.250s.
+  %.250s vai ser removido.
+ %.250s está descompactado, mas nunca foi configurado.
+  %.250s está descompactado, mas é versão %.250s.
+  %.250s a última versão configurada é %.250s.
+  %.250s disponibiliza %.250s e está presente e %s.
+  %.250s disponibiliza %.250s e vai ser instalado.
+  %.250s disponibiliza %.250s mas é %s.
+  %.250s disponibiliza %.250s mas vai ser desconfigurado.
+  %.250s disponibiliza %.250s mas vai ser removido.
+  %s (%s) disponibiliza %s.
+  -?, --help                       Mostrar esta mensagem de ajuda.
+      --version                    Mostrar a versão.
+
+  O pacote %s aguarda pelo processamento de trigger.
+ O pacote %s ainda não está configurado.
+  O pacote %s não está instalado.
+  O pacote %s vai ser removido.
+  O pacote %s que disponibiliza %s aguarda pelo processamento de trigger..
+  O pacote %s que disponibiliza %s ainda não está configurado.
+  O pacote %s que disponibiliza %s não está instalado.
+  O pacote %s que disponibiliza %s vai ser removido.
+  A versão de %s no sistema é %s.
+  A versão de %s no sistema é disponibilizada por %s, é %s.
+  A versão de %s a ser configurada é %s.
+  link %s é %sA melhor versão do link é %s a melhor versão do link não está disponível  link actualmente inexistente  o link actualmente aponta para %s  escravo %s é %s  escravo %s: %s %7jd bytes, %5d linhas   %c  %-20.127s %.127s
+%d em %s:  %d pacote, da seguinte secção: %d pacotes, das seguintes secções: %s (%jd bytes)
+ %s (%s) estraga %s e é %s.
+ %s (não é um ficheiro comum)
+ ==> Apagado (por si ou por um script) desde a instalação.
+ ==> Ficheiro no sistema criado por si ou por um script.
+ ==> Ficheiro também no pacote disponibilizado pelo maintainer do pacote.
+ ==> A manter o ficheiro de configuração antigo como predefinição.
+ ==> Modificado (por si ou por um script) desde a instalação.
+ ==> O distribuidor do pacote enviou uma versão actualizada.
+ ==> A usar o actual ficheiro antigo conforme você pediu.
+ ==> A usar o novo ficheiro de configuração como padrão.
+ ==> A usar o novo ficheiro conforme você pediu.
+ Pacote %s: parte(s)  A acção padrão é instalar a nova versão.
+ A acção padrão é manter a sua versão actual.
+ e  depende de  novo pacote Debian, versão %d.%d.
+ %jd bytes de tamanho: arquivo de controle=%jd bytes.
+ pacote Debian antigo, versão %d.%d.
+ tamanho %jd bytes: arquivo de controle=%jd, arquivo principal=%jd.
+%d programa esperado não foi encontrado em PATH ou não é executável
+%s%d programas esperados não foram encontrados em PATH ou não são executáveis
+%s%d ficheiro(s) e directório(s) actualmente instalados.)
+%d ficheiros e directórios actualmente instalados.)
+%d componente de controle pedido em falta%d componentes de controle pedidos em falta%s (subprocesso); %s
+%s - prioridade %d%s danifica %s%s em conflito com %s%s corrompido: %sOpção de depuração %s, --debug=<octal> ou -D<octal>:
+
+ Número  Ref. na fonte    Descrição
+%s depende de %s%s melhora %sOpções para forçar %s - controlar comportamento quando são encontrados problemas:
+  avisar e continuar:  --force-<coisa>,<coisa>,...
+  parar com erro.      --refuse-<coisa>,<coisa>,... | --no-force-<coisa>,...
+ Opções para forçar:
+%s não é um ficheiro normal%s não está instalado convenientemente; a ignorar quaisquer dependências nele%s pre-depende de %s%s recomenda %so subprocesso %s falhou com o código de status wait %do subprocesso %s retornou erro do status de saída %do sub-processo %s foi interrompidoo subprocesso %s foi morto pelo sinal (%s)%s%s sugere %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Versão do formato de parte:     %d.%d
+    Parte do pacote:                %s
+        ... versão:                 %s
+        ... arquitectura:           %s
+        ... MD5 checksum:           %s
+        ... tamanho:                %jd bytes
+        ... divir a cada:           %jd bytes
+    Número de parte:                %d/%d
+    Tamanho da parte:               %jd bytes
+    Offset da parte:                %jd bytes
+    Tam. parte fich.(porção usada): %jd bytes
+
+%s: ficheiro de configuração '%.250s' não é um ficheiro de texto ou link simbólico (= '%s')%s: ficheiro de configuração '%.250s' resolve para ficheiro degenerado
+ ('%s é um link simbólico para '%s')%s: ficheiro de configuração '%s' é um link circular
+ (= '%s')%s: problemas com dependências, mas a configurar à mesma conforme pedido:
+%s%s: problemas com dependências, mas mesmo assim a processar triggers conforme você pediu:
+%s%s: problemas com dependências, mas mesmo assim a remover conforme você pediu:
+%s%s: erro de ligação de entrada a stream bzip2%s: erro ao ligar entrada a stream gzip%s: erro de ligação de saída para stream bzip2%s: erro de ligação da saída a stream gzip%s: falhou fazer o link '%.250s' para '%.250s': %s%s: falhou remover '%.250s' (antes de sobre-escrever): %s%s: falhou remover '%.250s': %s%s: falhou remover o backup antigo '%.250s': %s%s: falhou remover a versão antiga distribuída '%.250s': %s%s: falhou renomear '%.250s' para '%.250s': %s%s: erro interno de leitura de bzip2%s: erro interno de leitura de bzip2: '%s'%s: erro interno de escrita de bzip2%s: erro interno de escrita de bzip2: '%s'%s: erro interno de leitura de gzip%s: erro interno de leitura de gzip: '%s'%s: erro interno de escrita de gzip%s: erro interno de escrita de gzip: %s%s: erro interno de escrita de gzip: '%s'%s: erro de fecho de lzma%s: erro de lzma: %s%s: erro de leitura de lzma%s: erro de escrita de lzma%s: erro de cópia de pass-through: %s%s: não foi possível abrir %s para o hash: %s%s: não foi possível fazer readlink ao ficheiro de configuração '%s'
+ (= '%s'): %s%s: não foi possível fazer stat ao ficheiro de configuração '%s'
+ (= '%s'): %s'%.255s' não contém nenhum componente de controle '%.255s''%.255s' não é um arquivo de formato Debian'%s' choca com '%s''%s' contém o valor '%s' de Priority definido pelo utilizador'%s' não toma valorescampo '%s' presente para o pacote com campo inapropriado '%s'campo '%s' com valor '%.250s'campo '%s', nome de pacote inválido '%.255s': %scampo '%s', com nome de arquitectura em falta, ou lixo onde era esperado o nome de arquitecturacampo '%s', falta nome de pacote, ou lixo onde era esperado nome de pacotecampo '%s', referência a '%.255s':
+ '%c' está obsoleto, em vez disso utilize '%c=' ou '%c%c'campo '%s', referência a '%.255s':
+ má relação de versão %c%ccampo '%s', referência a '%.255s':
+ combinação exacta implícita no número de versão, sugere utilizar '=' em vez dissocampo '%s', referência a '%.255s':
+ valor de versão começa por não-alfanumérico, sugere adicionar um espaçocampo '%s', referência a '%.255s': nome de arquitectura inválido '%.255s': %scampo '%s', referência a '%.255s': versão '%s'campo '%s', referência a '%.255s': versão não terminadacampo '%s', erro de sintaxe após referência ao pacote '%.255s''%s' não é um nome válido de arquitectura no campo '%s': %s'%s' necessita de um valor'%s' não foi encontrado em PATH ou não é executável(A notar o desaparecimento de %s, que foi totalmente substituído.)
+(A ler a base de dados ... (sem descrição disponível)(total %jd bytes)
+, core dumpeda opção -%c não toma valoresa opção -%c toma um valor--%s --pending não leva quaisquer argumentos não-opção--%s --recursive necessita de pelo menos um argumento de path--%s (ainda) não suporta ler o .deb a partir de standard input--%s necessita de um ficheiro .deb e directório como argumentos--%s necessita de <nome>--%s necessita de <nome> <caminho>--%s necessita de um ficheiro .deb como argumento--%s necessita de um argumento <directório>--%s necessita de um argumento <ficheiro>--%s necessita de um único argumento--%s necessita de um directório de destino.
+Talvez você devesse estar a utilizar dpkg --install ?--%s necessita de um nome de pacote válido mas '%.250s' não o é: %s--%s necessita pelo menos de um argumento de ficheiro de arquivo de pacote--%s necessita de pelo menos um argumento de nome de pacote--%s necessita de quatro argumentosa opção --%s não toma valoresa opção --%s toma um valor--%s necessita de um argumento positivo em octal--%s necessita de um ou mais argumentos de partes de ficheiro--%s necessita no máximo um argumento ficheiro-Packages--%s leva no máximo dois argumentos--%s toma no máximo dois argumentos (.deb e directório)--%s toma exactamente um argumento--%s toma exactamente dois argumentos--%s não leva argumentos--%s leva um argumento <archame>--%s leva um argumento <pkgname>--%s leva um argumento <trigname>--%s leva um argumento <versão>--%s leva um argumento de nome de pacote--%s toma apenas um argumento (ficheiro .deb)--%s utilizado com operador de relação '%s' obsoleto--auto necessita exactamente de um ficheiro de parte como argumento--auto necessita da utilização da opção --outputmá relação de --compare-versions--compare-versions toma três argumentos: <versão> <relação> <versão>--search necessita de pelo menos um argumento de pattern de nome de ficheiro--split necessita de um argumento de ficheiro fonte--split leva no máximo um ficheiro fonte e um prefixo de destino--update foi dada mas %s não existe--update é inútil para --remove... parece que tudo correu bem.../%s; no entanto:
+<comprimir> de tar -cf<deb> é o nome do ficheiro de um arquivo de formato Debian.
+<cfile> é o nome de um componente de um ficheiro administrativo.
+<cfield> é o nome de um campo no ficheiro principal 'control'.
+
+<descompressão><dpkg-deb --info pipe><ligação> e <caminho> não podem ser o mesmo<link> é um link simbólico que aponta para %s/<nome>.
+  (e.g. /usr/bin/pager)
+<nome> é um nome mestre para este grupo de link.
+  (e.g. pager)
+<caminho> é a localização de um um dos ficheiros alvo da alternativa.
+  (e.g. /usr/bin/less)
+<prioridade> é um inteiro; as opções com números maiores têm prioridade superior em modo automático.
+
+<estado do pacote e descriptor de progresso do ficheiro><erro standard><entrada standard><saída standard>A acrescentar '%s'
+Permitir a instalação de pacotes em conflitoAlternativa %s inalterada porque a escolha %s não está disponível.Instalar sempre ficheiros de configuração em faltaUtilizar sempre os novos ficheiros de configuração, não perguntarUtilizar sempre os ficheiros de configuração antigos, não perguntarOutro processo bloqueou a base de dados para escrita, e actualmente pode estar a modifica-lo, alguns dos seguintes problemas podem ser devidos a isso.
+ArquitecturaA autenticar %s ...
+É necessária autenticação para correr update-alternativesComandos:
+  --add <dono> <grupo> <modo> <caminho>
+                           acrescentar uma nova entrada <caminho> na base de dados.
+  --remove <caminho>       remover <caminho> da base de dados.
+  --list [<padrão-glob>]   listar os actuais overrides na base de dados.
+
+Comandos:
+  --check-supported                Verificar se o dpkg em execução suporta 'triggers'.
+
+Comandos:
+  --install <link> <nome> <caminho> <prioridade>
+    [--slave <link> <nome> <caminho>] ...
+                           acrescentar um grupo de alternativas ao sistema.
+  --remove <nome> <caminho>remover <caminho> do grupo alternativo <nome>.
+  --remove-all <nome>      remover o grupo <nome> do sistema de alternativas.
+  --auto <nome>            mudar o link principal <nome> para modo automático.
+  --display <nome>         mostrar informação sobre o grupo <nome>.
+  --query <nome>           versão processável por máquina de --display <nome>.
+  --list <nome>            mostrar todos os alvos do grupo <nome>.
+  --get-selections         listar os nomes mestre de alternativas e o seu estado.
+  --set-selections         ler estado de alternativa da entrada standard.
+  --config <nome>          mostrar alternativas para o grupo <nome> e pedir
+                           ao utilizador para escolher qual utilizar.
+  --set <nome> <caminho>   definir o <caminho> como alternativa para <nome>.
+  --all                    chamar --config para todas as alternativas.
+
+Comandos:
+  -i|--install       <ficheiro .deb>... | -R|--recursive <diretório> ...
+  --unpack           <ficheiro .deb>... | -R|--recursive <diretório> ...
+  -A|--record-avail  <ficheiro .deb>... | -R|--recursive <diretório> ...
+  --configure        <pacote>...  | -a|--pending
+  --triggers-only    <pacote>...  | -a|--pending
+  -r|--remove        <pacote>...  | -a|--pending
+  -P|--purge         <pacote>...  | -a|--pending
+  -V|--verify <pacote> ...        Verificar a integridade do(s) pacote(s).
+  --get-selections [<padrão>...]  Enviar a lista de selecções para stdout.
+  --set selections                Definir a lista de selecções a partir de stdin.
+  --clear-selections              Desseleccionar todos os pacotes não essenciais.
+  --update-avail [<ficheiro-Packages>] Substituir informação de pacotes disponíveis.
+  --merge-avail [<ficheiro-Packages>]  Juntar com a informação do ficheiro.
+  --clear-avail                   Apagar a informação existente dos disponíveis.
+  --forget-old-unavail            Esquecer pacotes desinstalados indisponíveis.
+  -s|--status [<pacote>...]       Mostrar detalhes de estado do pacote.
+  -p|--print-avail [<pacote>...]  Mostrar detalhes da versão disponível.
+  -L|--listfiles <pacote>...      Listar ficheiros que pertencem ao(s) pacote(s).
+  -l|--list [<padrão> ...]        Listar pacotes resumidamente.
+  -S|--search <padrão>...         Encontrar pacote(s) com o(s) ficheiro(s).
+  -C|--audit [<pacote> ...]       Procurar pacotes com problemas.
+  --yet-to-unpack                 Escrever pacotes selecionados para instalação.
+  --predep-package                Escrever pré-dependências a desempacotar.
+  --add-architecture <arch>       Acrescentar <arch> à lista de arquitecturas.
+  --remove-architecture <arch>    Remover <arch> da lista de arquitecturas.
+  --print-architecture            Escrever a arquitectura do dpkg.
+  --print-foreign-architectures   Escrever arquitecturas estrangeiras permitidas.
+  --assert-<funcionalidade>       Ativar suporte para a funcionalidade especificada.
+  --validate-<coisa> <string>     Validar a <string> da <coisa>.
+  --compare-versions <a> <op> <b> Comparar números de versão - ver abaixo.
+  --force-help                    Mostrar ajuda sobre como forçar.
+  -Dh|--debug=help                Mostrar ajuda sobre debugging.
+
+Comandos:
+  -s|--status [<pacote>...]        Mostrar detalhes do estado do pacote.
+  -p|--print-avail [<pacote>...]   Mostrar detalhes da versão disponível.
+  -L|--listfiles <pacote>...       Listar os ficheiros que pertencem ao(s) pacotes(s).
+  -l|--list [<padrão>...]          Listar os pacotes de forma concisa.
+  -W|--show [<padrão>...]          Mostrar informação sobre o(s) pacote(s).
+  -S|--search <padrão>...          Encontrar pacote(s) dono(s) do(s) ficheiro(s).
+     --control-list <pacote>       Mostrar a lista de ficheiros control de pacote.
+     --control-show <pacote> <ficheiro>
+                                   Mostrar o ficheiro control do pacote.
+  -c|--control-path <pacote> [<ficheiro>]
+                                   Escrever o caminho do ficheiro control do pacote.
+
+  -s|--split <ficheiro> [<prefixo>]Dividir um arquivo.
+  -j|--join <parte> <parte> ...    Unir partes.
+  -I|--info <parte> ...            Mostrar informação sobre parte.
+  -a|--auto -o <completo> <parte>  Auto-acumular partes.
+  -l|--listq                       Listar bocados sem correspondência.
+  -d|--discard [<ficheiro> ...]    Descartar bocados sem correspondência.
+
+Comandos:
+ [--add] <ficheiro>        acrescentar um desvio.
+ --remove <ficheiro>       remover o desvio.
+ --list [<glob-pattern>]   mostrar os desvios de ficheiros.
+ --listpackage <ficheiro>  mostrar qual o pacote que desvia o ficheiro.
+ --truename <ficheiro>     retornar o ficheiro desviado.
+Os operadores de comparação para --compare-versions são:
+  lt le eq ne ge gt	   (tratar a versão vazia como anterior a qualquer outra versão);
+  lt-nl le-nl ge-nl gt-nl (tratar a versão vazia como posterior a qualquer outra versão);
+  < << <= = => >> >       (apenas para compatibilidade com a sintaxe do ficheiro control).
+
+Ficheiro de configuração '%s'
+Ficheiro de configuração '%s' (na realidade '%s')
+Configurar qualquer pacote que poderá ajudar esteA desconfigurar %s (%s) ...
+A desconfigurar %s (%s), para permitir a remoção de %s (%s) ...
+Ferramenta de consulta de programa de gestão de pacotes %s versão %s.
+Debian %s utilitário de trigger de pacotes versão %s.
+Debian %s versão %s.
+Debian '%s'' backend do arquivo de pacote versão %s.
+Debian '%s' programa de gestão de pacotes versão %s.
+Debian '%s' ferramenta para dividir/juntar pacotes; versão %s.
+Apagado %s.
+Dependências e conflitosDescriçãoDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Não fazer chroot para o ambiente de script do maintainerNão executar operações I/O seguras ao descompactarForam encontrados erros enquanto processava:
+Estado de saída:
+  0 = ok
+  1 = com --auto, o ficheiro não é uma parte
+  2 = problema
+O ficheiro '%.250s' não faz parte de um arquivo de várias partes.
+Sintaxe de formato:
+  Um formato é uma string que vai ser a saída para cada pacote. O formato
+  pode incluir as sequências de escape standard \n (newline), \r
+  (carriage return) ou \\ (plain backslash). A informação de pacote pode
+  ser incluída inserindo referências de variáveis aos campos de pacotes
+  utilizando a sintaxe ${var[;width]}. Os campos serão alinhados à direita
+  a não ser que a largura seja negativa, neste caso o alinhamento à esquerda
+  será utilizado.
+Informação de progresso geralmente útilIgnorar um stat override em falta ao removê-loIgnorar pedido para remover desvio partilhado '%s'.
+Ignorar pedido para renomear o ficheiro '%s' que pertence ao pacote desviado '%s'
+Foi actualizada a informação acerca de %d pacote(s).
+Foi actualizada a informação acerca de %d pacote(s).
+Estúpida quantidade de palhaInstalar um pacote mesmo que falhe a verificação de autenticidadeInstalar mesmo que vá estragar outro pacoteA instalar nova versão do ficheiro de configuração %s ...
+Invocação e estados dos scripts do maintainerFicheiros de lixo deixados no directório depot:
+A deixar '%s'
+Muita informação de saída de dependências/conflitosMuita palha acerca p.e. o directório dpkg/infoMuita informação de saída para cada ficheiro de configuraçãoMuita quantidade de saída para cada ficheiro processadoMuita informação de saída relativa a triggersfim de ficheiro MSDOS (^Z) no campo do nome '%.*s'fim de ficheiro MSDOS (^Z) no valor do campo '%.*s' (falta newline?)Foi descompactada mais que uma cópia do pacote %s
+ nesta execução !  Apenas configurando uma vez.
+NomeNenhum desvio '%s', nenhum removido.
+Nota: a PATH do root normalmente deve conter /usr/local/sbin, /usr/sbin e /sbinNada para configurar.Oferecer para substituir ficheiros de configuração sem novas versõesOpções:
+  --admindir=<directório>          Utilizar o <directório> em vez de %s.
+  --by-package=<pacote>            Ultrapassar o que espera pelo 'trigger'
+                                     (normalmente definido pelo dpkg).
+  --await			    Pacote necessita de aguardar o processamento.
+  --no-await                       Nenhum pacote necessita de aguardar pelo processamento.
+  --no-act                         Apenas testar - não alterar nada.
+
+Opções:
+  --depotdir <directório>          Usar <directório> em vez de %s/%s.
+  -S|--partsize <tamanho>          Em KiB, para -s (por omissão é 450).
+  -o|--output <ficheiro>           Nome de ficheiro, para -j (por omissão é
+                                     <pacote>_<versão>_<arch>.deb).
+  -Q|--npquiet                     Silencioso quando -a não for uma parte.
+  --msdos                          Gerar nomes de ficheiros 8.3.
+
+Opções:
+  --package <pacote>       nome do pacote cuja cópia de <ficheiro> não 
+                             será desviada.
+  --local                  todas as versões do pacotes estão desviadas.
+  --divert <desviar para>  o nome usado pelas outras versões do pacote.
+  --rename                 mover o ficheiro para outro lado (ou de volta).
+  --no-rename              não mover o ficheiro para outro lado (ou de volta) (predefinido).
+  --admindir <directório>  definir o directório com o ficheiro diversions.
+  --instdir <directório>   definir o directório raiz, mas não o directório admin.
+  --root <directório>      definir o directório do sistema de ficheiros raiz.
+  --test                   não fazer nada, apenas exemplificar.
+  --quiet                  operação em modo silencioso, saída mínima.
+  --help                   mostrar esta mensagem de ajuda.
+  --version                mostrar a versão.
+
+Opções:
+  -V, --verbose                    Habilitar saída detalhada.
+  -D, --debug                      Habilitar saída de debug.
+      --showformat=<formato>       Usar formato alternativo para --show.
+      --deb-format=<formato>       Escolher o formato de arquivo.
+                                     Valores permitidos: 0.939000, 2.0 (default).
+      --nocheck                    Suprimir verificação do arquivo controlo (construir pacotes mal-formados).
+      --root-owner-group           Forçar que o dono e grupo seja root.
+      --[no-]uniform-compression   Usar os parâmetros de compressão em todos os membros.
+  -z#                              Definir o nível de compressão para a compilação.
+  -Z<tipo>                         Definir o tipo de compressão utilizado para a compilação.
+                                     Tipos permitidos: gzip, xz, none.
+  -S<estratégia>                   Definir a estratégia de compressão para a compilação.
+                                     Tipos permitidos: none, extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Saída para cada ficheiro de configuraçãoSaída para cada ficheiro processadoSobrescrever um ficheiro desviado com uma versão não desviadaSobrescrever um ficheiro de um pacote por outroSobreescrever um stat override existente ao acrescentá-losobrescrever o directório de um pacote por outro ficheiroFaltam programas importantes em PATH, seguramente problemasPATH não está definidoPacote %s está em espera, não lhe tocando. Utilize --force-hold para forçar.
+Pacote %s listado mais de uma vez, apenas processando uma vez.
+O pacote '%s' não contém qualquer ficheiro (!)
+Pacotes ainda não refeitos:
+Parte %d do pacote %s arquivada (ainda quer CaminhoCampo Pre-DependsA preparar para desempacotar %s ...
+Pressione <enter> para manter a escolha actual[*], ou digite o número da selecção: PrioridadeProcessar até pacotes com arquitectura errada ou sem nenhumaProcessar até pacotes com versões erradasA processar 'triggers' para %s (%s) ...
+O processamento parou porque ocorreram demasiados erros.
+A purgar os ficheiros de configuração para %s (%s) ...
+A formar o pacote %s com %d parte: A formar o pacote %s com %d partes: Foi gravada informação sobre %s desde %s.
+Remover um pacote essencialRemover pacotes que necessitam de instalaçãoA remover %s (%s) ...
+A remover '%s'
+Substituir um pacote por uma versão inferiorSubstituído por ficheiros no pacote instalado %s (%s) ...
+A substituir a informação de pacotes disponíveis, a utilizar %s.
+A substituir ficheiros no pacote antigo %s (%s) ...
+Corra update-alternatives para modificar o sistema de seleções de alternativasA seleccionar pacote anteriormente não seleccionado %s.
+SelecçãoDefinir todas as opções de forçarA instalar %s (%s) ...
+Estúpida quantidade de informação de saída em relação a triggersSaltar linha inválida: %sSaltar alternativa %s desconhecida.A saltar pacote não seleccionado %s.
+A dividir o pacote %s em %d parte: A dividir o pacote %s em %d partes: EstadoOs seguintes pacotes aguardam o processamento de 'triggers' que activaram noutros pacotes.  Este processamento pode ser chamado utilizando o dselect ou dpkg --configure --pending (ou dpkg --triggers-only):
+Os seguintes pacotes estão numa confusão devido a graves problemas durante
+a instalação.  Têm de ser re-instalados (e quaisquer pacotes que dependam
+deles) para funcionarem devidamente:
+Falta, aos seguintes pacotes, o ficheiro de lista de controlo na base de
+dados, necessitam ser reinstalados:
+Aos seguintes pacotes falta o ficheiro de controlo md5sum na base de dados,
+necessitam ser reinstalados:
+Os seguintes pacotes só estão semi-configurados, provavelmente devido a
+problemas a configura-los pela primeira vez.  A configuração deve ser tentada
+de novo utilizando dpkg --reconfigure <pacote> ou usando a opção configurar
+no menu do dselect:
+Os seguintes pacotes só estão semi-instalados, devido a problemas durante
+a instalação.  A instalação pode provavelmente ser completada voltando a
+tentar; os pacotes podem ser removidos utilizando o dselect ou dpkg --remove:
+Os seguintes pacotes não têm uma arquitectura:
+Os seguintes pacotes têm uma arquitectura ilegal:
+Os seguintes pacotes têm uma arquitectura estrangeira desconhecida, a qual
+irá causar problemas de dependências em frontends. Isto pode ser corrigido
+ao registar a arquitectura estrangeira com dpkg --add-architecture:
+Foram activados os seguintes pacotes, mas o processamento de 'triggers' ainda não foi efectuado.  O processamento de 'triggers' pode ser chamado utilizando o dselect ou dpkg --configure --pending (ou dpkg --triggers-only):
+Os seguintes pacotes foram descompactados mas ainda não foram configurados.
+Têm de ser configurados utilizando dpkg --configure ou a opção configurar
+no menu do dselect para funcionarem:
+Há %d escolha para a alternativa %s (disponibiliza %s).Existem %d escolhas para a alternativa %s (disponibiliza %s).Não existe um programa que disponibiliza %s.Existe apenas uma alternativa no grupo de ligação %s (que disponibiliza %s: %sIsto é software livre; veja a GNU General Public License versão 2 ou
+posterior para condições de cópia. Não existe NENHUMA garantia.
+Activação e processamento de triggersTentar (des)instalar coisas mesmo não sendo rootTornar todos os problemas com dependências em avisosTornar problemas com versões de dependências em avisosEscreva 'exit' quando tiver terminado.
+Escreva dpkg --help para ajuda sobre instalar e desinstalar pacotes [*];
+Utilize 'apt' ou 'aptitude' para gestão de pacotes amigável;
+Escreva dpkg -Dhelp para uma lista de valores de flags de debug do dpkg;
+Escreva dpkg --force-help para uma lista de opções para forçar operações;
+Escreva dpkg-deb --help para ajuda sobre manipular ficheiros *.deb;
+
+Opções marcadas com [*] produzem muita saída de texto - utilize pipes com 'less' ou 'more' !Escreva dpkg-deb --help para ajuda sobre manipulação de ficheiros *.deb;
+Escreva dpkg --help para ajuda sobre instalar e desinstalar pacotes.Escreva dpkg-split --help para ajuda.Escreva dpkg-trigger --help para ajuda acerca deste utilitário.A descompactar %s (%s) ...
+A descompactar %s (%s) sobre (%s) ...
+A actualizar a informação de pacotes disponíveis, a utilizar %s.
+Utilização: %s [<opção> ...] <comando>
+
+Use %s --help para informação sobre a utilização do programa.Utilize 'apt' ou 'aptitude' para uma gestão amigável de pacotes.
+Use --help para ajuda sobre desvio de ficheiros.Use --help para ajuda sobre como ultrapassar informação de stat a ficheio.Use --help para ajuda sobre consultar pacotes.Utilize segurança baseada em MAC, se disponívelUtilize dpkg --contents (= dpkg-deb --contents) para listar o conteúdo de ficheiros de arquivo.
+Utilize dpkg --info (= dpkg-deb --info) para examinar ficheiros de arquivo.
+Utilize dpkg -b, --build, -c, --contents, -e, --control, -I, --info,
+|-f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+em arquivos (escreva %s --help).
+
+Utilizar a opção por omissão para novos ficheiros de
+configuração, se estiver disponível não questionar.
+Se não puder ser encontrado nenhum por omissão irá
+ser questionado a menos que também sejam indicadas
+as opções confold ou confnewVariáveis de ambiente úteis:
+Coisas validáveis: pkgname, archname, trigname, version.
+VersãoA versão do dpkg com suporte funcional de %s ainda não está configurado.
+ Por favor utilize 'dpkg --configure dpkg', e depois tente novamente.
+Ao acrescentar, o predefinido é --local e --divert <original>.distrib.
+Ao remover, --package ou --local e --divert têm de coincidir se especificados.
+Os scripts preinst/postrm dos pacotes devem sempre especificar --package e --divert.
+Iria remover ou fazer purge a %s (%s) ...
+[padrão=N][padrão=Y][sem padrão]admindir tem de ser dentro de instdir para o dpkg funcionar correctamentetambém a configurar '%s' (necessário por '%s')alternativa %s (parte do grupo de ligação %s) não existe; a remover da lista de alternativasa alternativa %s não pode ser mestre: é um escravo de %sa alternativa %s não pode ser escrava de %s: é a alternativa mestrea alternativa %s não pode ser escrava de %s: é um escravo de %salternativa %s para %s não registada, a não removera alternativa %s para %s não registada, a não definirligação de alternativa %s já é gerida por %sligação de alternativa %s já é gerida por %s (escrabo de %s)ligação da alternativa não é absoluta como deveria ser: %snome da alternativas (%s) não pode conter '/' nem espaçoso caminho da alternativa não é absoluto como deveria ser: %salternativas ('|') não são permitidas no campo '%s'nome de pacote '%s' ambíguo com mais de uma instância instaladaJá existe um override para '%s', mas --force foi especificado por isso será ignoradojá existe oum verride para '%s'; a abortarqualquer desvio de %squalquer desvio de %s para %so membro ar de nome '%s' é demasiado longomembro de ar de tamanho %jd é demasiado longo<vazio><nenhuma><desconhecida>arquitectura '%s' é ilegal: %sarquitectura '%s' é reservada e não pode ser adicionadao nome de arquitectura '%s' é inválido: %so arquivo '%.250s' contém dois membros de controle, a desistiro arquivo '%s' tem um membro prematuro '%.*s' antes de '%s', a desistiro arquivo '%s' não é um ficheiro normalo arquivo '%s' utiliza compressão desconhecida para o membro '%.*s', a desistirarquivo continha objecto '%.255s' de tipo desconhecido 0x%xtamanho do membro do arquivo de controlocampo '%s' de detalhes de arquivo não é permitido no ficheiro statuso arquivo tem um formato de versão inválido: %so arquivo tem o tamanho do controlo mal formatado '%s'o arquivo não tem newlines no cabeçalhomembro de cabeçalho de informação do arquivoarquivo tem versão de formato %d.%d; obtenha um dpkg-deb mais recentenúmero mágico de versão do arquivocabeçalho de membro do arquivonúmeros de partes do arquivooffset de parte de arquivonúmero da parte do arquivotamanho total do arquivomodo automáticoactualizações automáticas de %s/%s estão desactivadas; a deixar como estáa aguardar o processamento de 'trigger' por outro pacotelinha em branco no valor do campo '%.*s'booleano (sim/não) campo '%s': %sestragado devido a remoção ou instalação falhadaestragado devido a falha de postinsta compilar um pacote desconhecido em '%s'.a compilar o pacote '%s' em '%s'.não foi possível instalar a opção %s desconhecidanão pode fazer mmap ao ficheiro de informação do pacote '%.255s'não pode remover o script postrm antigonão pode fazer stat ao ficheiro de informação do pacote '%.255s'não pode aceder ao arquivo '%s'não pode acrescentar o ficheiro de membro ar (%s) a '%s': %sNão pode justapor a parte do pacote dividido '%s' para '%s': %snão pode acrescentar a '%s'não pode fechar o pipe do descompressornão pode processar a hash MD5 para o ficheiro '%s': %snão pode processar hash MD5 para o ficheiro tar '%.255s': %snão pode converter a sequência multibyte '%s' para wide characternão pode converter a string myltibyte '%s' para uma string wide-characternão pode copiar '%s' para o arquivo '%s': %snão pode copiar '%s' para '%s': %snão pode copiar membro do arquivo de '%s' para o pipe do descompressor: %snão pode copiar dados extráidos para '%.255s' para '%.255s': %snão pode desviar directóriosnão pode desviar o ficheiro '%s' para si próprionão pode extrair o ficheiro control '%s' de '%s': %snão pode extrair parte de pacote dividido '%s': %snão pode obter a hora da última modificação do sistema de ficheiros do pacote %snão pode obter a identificação de segurançanão pode abrir %snão pode abrir '%.255s' (em %.255s')não pode abrir ficheiro de parte de arquivo '%.250s'não pode abrir o directório '%s'não pode abrir o ficheiro '%s'não pode abrir o canal de notificação de estado de segurançanão pode escrever %snão pode ler o directório do ficheiro de configuração '%.250s' (de '%.250s')não pode ler directório infonão pode remover '%.250s'nao pode remover a arquitectura '%s' actualmente em utilização pela base de dadosnão pode remover a arquitectura nao-estrangeira '%s'não pode remover o backup do ficheiro de configuração antigo '%.250s') (de '%.250s')não pode remover ficheiro de configuração antigo '%.250s' (= '%.250s')não pode remover a antiga lista de ficheirosNão pode fazer renomear '%s' para '%s'não pode satisfazer pre-dependências para %.250s (desejada devido a %.250s)não pode pesquisar o directório '%.255s'não pode pesquisar directório de actualizações '%.255s'não vejo como satisfazer pre-dependência:
+ %snão pode definir o ID do grupo primário para rootnão pode definir o contexto de segurança para o objecto ficheiro '%s'não pode definir o contexto de execução para o script do maintainernão pode saltar membro do controlo do arquivo '%s': %snão pode saltar o membro do arquivo '%s': %snão pode saltar o ficheiro '%.255s' (substituído ou excluído?) do pipe: %snão pode fazer saltar o enchimento para o ficheiro '%.255s': %snão pode saltar o cabeçalho dividido do pacote '%s': %sNão pode fazer stat %sNão pode fazer stat '%.255s' (em %.255s')Não pode fazer stat ao ficheiro '%s'não pode fazer stat ao caminho '%s'não pode escreiver o ficheiro %s para o pagernão foi possível fazer zap ao rasto de zeros de dpkg-deb: %so caractere '%c' não é permitido (apenas letras, dígitos e caracteres '%s')os dados comprimidos estão corrompidosa comprimir membro de taro conffile '%.250s' não aparece no pacotenão é possível fazer stat ao conffile '%.250s'o conffile '%s' não é um ficheiro de textovisualizador de diferenças de conffileficheiro conffile contém uma linha vaziao nome do ficheiro conffile '%s' contém espaços em branco de enchimentoo nome do conffile '%s' está duplicadoo nome de conffile '%s' é demasiado longo, ou falta uma nova linha finalshell conffileerro de configuração: %s:%d: %sacções em conflito -%c (--%s) e -%c (--%s)desvios em conflito envolvendo '%.250s' ou '%.250s'pacotes em conflito - não irá instalar %.250sa considerar a desconfiguração de %s, que seria estragada por %s ...a considerar a desconfiguração do pacote
+ essencial %s, para permitir %sa considerar remover %s em favorecimento de %s ...directório de controle tem permissões erradas %03lo (tem de ser >=0755 e <=0775)o directório de controlo não é um directórioo ficheiro de controlo '%s' não existeo ficheiro control '%s' para o pacote '%s' contém um nome de ficheiro vaziofalta uma nova linha final no ficheiro control '%s' para o pacote '%s'falta um valor ao ficheiro control '%s' para o pacote '%s'falta um separador de valor no ficheiro control '%s' para o pacote '%s'ficheiro control contém %cmembro de controlficheiro de formato da base de dados de info corrompido '%s'sistema de ficheiros do ficheiro tar corrompido no arquivo de pacotenão pode abrir o log '%s': %snão foi possível fazer stat ao ficheiro antigo '%.250s' por isso não será apagado: %snão pode abrir '%i' para streama alternativa %s actual é desconhecida, a mudar para %s para a ligação de grupo %sfoi encontrado um ciclo ao processar os triggers:
+ a cadeia de pacotes desses triggers são ou poderão ser responsáveis:membro de dadosproblemas com dependências - a deixar triggers por processarproblemas com dependências - a deixar por configurarproblemas com dependências - não removidoproblemas com dependências impedem a configuração de %s:
+%sproblemas com dependências impedem o processamento de triggers para %s:
+%sproblemas com dependências previnem a remoção de %s:
+%sopção --%s obsoleta; por favor utilize antes --%sa descartar ligação de escravo obsoleto %s (%s)desviado por %s para: %s
+desviado por %s para: %s
+desvio de %s por %sdesvio de %s para %s por %so desvio não pode conter novas linhasdesviado por %s para: %s
+desviar o ficheiro '%s' de um pacote Essential com renomear é perigoso, utilize --no-renamefeito
+a fazer downgrade a %.250s de %.250s para %.250slock à base de dados do dpkglock ao frontend do dpkgdpkg não registado como instalado, não pode verificar o suporte para %s!
+'trigger' esperado duplicado do pacote '%.255s'ficheiro duplicado de interesse de 'trigger' para o ficheiro '%.250s' e pacote '%.250s'caminho duplicado %s'trigger' duplicado '%.255s' pendente'slave link' duplicado %snome de 'escravo' duplicado %svalor duplicado para o campo '%s'valor duplicado para campo definido pelo utilizador '%.*s'campo '%s' de detalhes de arquivo vazionome de campo vaziostring vazia vinda de fgets ao ler conffilesnão são permitidos 'triggers' com nomes vaziosvalor vazio para o campo '%s'fim de ficheiro após campo do nome '%.*s'fim de ficheiro antes do valor do campo '%.*s' (falta o newline final)fim de ficheiro durante o valor do campo '%.*s' (falta newline final)fim de ficheiro em stdin na prompt do ficheiro de configuraçãoeraépoca na versão está vaziaépoca na versão é negativaépoca na versão não é um númeroépoca na versão é demasiado grandeerroerro ao verificar '%s'erro a fechar %.250serro ao fechar o ficheiro de configuração '%.255s'erro ao fechar/escrever '%.255s'erro ao criar dispositivo '%.255s'erro ao criar o directório '%.255s'erro ao criar hard link '%.255s'erro ao criar o novo ficheiro de backup '%s'erro ao criar pipe '%.255s'erro ao criar link simbólico '%.255s'erro ao assegurar que '%.250s' não existeerro ao executar o hook '%s', código de saída %derro ao formatar a string para uma variável varbuferro no formato de apresentação: %serro ao instalar o novo ficheiro '%s'erro ao abrir o ficheiro conffileserro ao fechar o directório de configuração '%s'erro ao processar o arquivo %s (--%s):
+ %serro ao processar o pacote %s (--%s):
+ %serro ao ler %.250serro ao ler %s do ficheiro %.255serro ao ler o ficheiro conffileserro ao ler do pipe dpkg-deberro ao ler o ficheiro de 'triggers' adiados '%.250s'erro ao remover o antigo ficheiro de backup '%s'erro ao definir dono de '%255s'erro ao definir dono do link simbólico '%255s'erro ao definir permissões de '%.255s'erro ao definir timestamps de '%.255s'erro ao tentar abrir %.250serro soltando-se do sinal %s: %s
+erro ao limparerro ao escrever '%s'erro ao escrever '%s'erro ao escrever para '%s'erro ao escrever para a lista de arquitecturaserro ao escrever para stderr, descoberto antes da prompt do ficheiro de configuraçãoa alocação de memória falhoufalhou alocar memória para uma nova entrada na lista de pacotes que falharam: %so chdir para '%.255s' falhoufalhou o chdir para o directóriofalhou o chroot para '%.250s'falhou fechar após ler: '%.255s'falhou criar directóriofalhou criar um pipefalhou dup para fd %dfalhou dup para std%sfalhou ao fazer fstat ao ficheiro membro de ar (%s)falhou o fstat ao arquivofalhou fstat ao ficheiro diversionsfalhou o fstat ao ficheiros statoverridefalhou criar ficheiro temporário (%s)falhou ao abrir o ficheiro de configuração '%.255s' para leitura: %sfalhou abrir ficheiro diversionsfalhou ao abrir ficheiro de informações do pacote '%.255s' para leiturafalhou abrir ficheiro statoverridefalhou a abertura do ficheiro '%.250s' de lista de interesses do 'trigger'falhou a leiturafalhou ler '%.255s' (em '%.255s')falhou ler o arquivo '%.255s'falhou a remoção do ficheiro de actualização incorporado %.255sfalhou a remoção do meu próprio ficheiro de actualização %.255sfalhou o rewind do ficheiro temporário (%s)falhou o rewind ao ficheiro '%.250s' de interesses do 'trigger'falhou executar o seekfalhou o fazer stat (anular referência) de ligação simbólica existente '%.250s'falhou o fazer stat (anular referência) proposto novo alvo para a ligação simbólica '%.250s' para a ligação simbólica '%.250s'falhou ao fazer fstat ao ficheiro temporário (%s)falhou o unlink do ficheiro temporário (%s), %sfalhou a escritafalhou ao escrever o registo %s da base de dados cerca de '%.50s' a '%.250s'falhou escrever os detalhes de '%.50s' a '%.250s'falhou escrever o nome do ficheiro para pipe do tar (%s)fgets deu uma string vazia de '%.250s'o nome de campo '%.*s' não pode começar com um hífencampo do nome '%.*s' tem de ser seguido de dois pontoscomprimento do campo está fora de alcanceo ficheiro '%.250s' tem versão de formato inválido: %so ficheiro '%.250s' está corrompido - %.250s em faltao ficheiro '%.250s' está corrompido - checksum MD5 errado '%.250s'o ficheiro '%.250s' está corrompido - mau cabeçalho de arquivoo ficheiro '%.250s' está corrompido - número de parte de arquivo erradoo ficheiro '%.250s' está corrompido - dígito errado (código %d) em %so ficheiro '%.250s' está corrompido - magic errado no final do primeiro cabeçalhoo ficheiro '%.250s está corrompido - magic errado no fim do segundo cabeçalhoo ficheiro '%.250s' está corrompido - número errado de partes do arquivoo ficheiro '%250s' está corrompido - caractere de enchimento errado (código (%d)o ficheiro '%.250s' está corrompido - falta newline após %.250so ficheiro '%.250s' está corrompido - sem barra entre números de partes do arquivoo ficheiro '%.250s' está corrompido - nulos na secção infoo ficheiro '%.250s' está corrompido - o segundo membro não é um membro de dadoso ficheiro '%250s' está corrompido - o tamanho está errado para o número da parte citadoo ficheiro '%.250s' está corrompido - demasiado pequenoo ficheiro '%.250s' está corrompido - número errado de partes para os tamanhos citadoso ficheiro '%.250s' está no formato versão %d.%d; obtenha um dpkg-split mais recenteo ficheiro '%.250s' não é um arquivo Debian binário (tente dpkg-split?)o ficheiro '%250s' não é uma parte de arquivoo ficheiro '%s' está corrompido; número inteiro fora da gama em %so ficheiro '%s' não é uma parte de arquivo
+formato de ficheiro não reconhecidoo ficheiro parece ser um arquivo que foi corrompido
+ por ter sido feito o download em modo ASCIIo ficheiro não pode conter quebras de linharegisto de ficheiro de 'trigger' menciona o nome de pacote ilegal '%.250s' (para o interesse no ficheiro '%.250s'): %.250so nome do ficheiro "%s" não é absolutoos ficheiros '%.250s' e '%.250s' não são partes do mesmo ficheiroo ficheiro de lista de ficheiros para o pacote '%.250s' contém um ficheiro vaziofalta uma nova linha final no ficheiro de lista de ficheiros para o pacote '%.250s'falta ficheiro de lista de ficheiros '%.250s'; assumindo que o pacote não tem actualmente ficheiros instaladosprimeiro (quer) palavra no campo '%s': %sa forçar a reinstalação da alternativa %s porque a ligação de grupo %s está estragadafalhou forkformato de versão seguido de lixoformato de versão não tem pontoformato do número de versãoformato de versão com componente maior vazioformato de versão com componente menor vazioformato de versão com componente maior demasiado grandeformato de versão com componente demasiado grandeforam encontrados pacotes desconhecidos; isto pode significar que a base de
+dados available está desactualizada e necessita ser actualizada através de
+um método frontend; por favor veja o FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>gerado cabeçalho ar corrompido para '%s'o grupo '%s' não existetem um valor inválido '%.50s'tem lixo no finalo cabeçalho é demasiado longo, tornando a parte demasiado longa; o nome do
+pacote ou números de versão têm de ser extraordinariamente compridos, ou
+outra coisa; a desistira ignorar %d aviso acerca do ficheiro controla ignorar %d avisos acerca do(s) ficheiro(s) de controlea ignorar problema, pode proceder de qualquer modo !a ignorar conflito, pode proceder de qualquer modo !a ignorar problema de dependências com %s:
+%sa ignorar problema de pré-dependência!a ignorar pedido para remover %.250s o qual não está instaladoa ignorar pedido para remover %.250s, apenas os ficheiros de 
+configuração do mesmo estão no sistema; utilize --purge para removê-los também.nome ilegal de arquitectura no especificador '%s:%s': %snome '%.250s' ilegal de pacote esperado: %.250snome de pacote ilegal na linha %d: %.250snome de pacote ilegal no 'trigger' esperado '%.255s': %snome de pacote ilegal no especificador '%s%s%s': %snome de 'trigger' pendente ilegal '%.255s': %so formato de base de dados de informação (%d) está errado ou é demasiado novo; tente obter um dpkg mais recentFicheiro info %s/%s não associado a qualquer pacoteinstalação de %.250sinstaladoinstalado, do pacote %s, o script %sinstalar %.250s irá estragar %.250s, e
+não é permitida a desconfiguração (--auto-deconfigure poderá ajudar)instalar %.250s irá estragar software existenteerro internoerro interno (bug)caractere '%c' inválido no membro do arquivo '%.250s' de tamanho '%.16s'caractere inválido '%c' no comprimento do campocaractere inválido no número de revisãocaractere inválido no número de versãonível de compressão inválido para -%c: %ldparâmetros inválidos do compressor: %s'versão de formato deb inválida: %snúmero inteiro inválido para -%c: '%.250s'número inteiro inválido para --%s: '%.250s'sintaxe inválida ou desconhecida no nome '%.250s' do 'trigger' (nos interesses do 'trigger' para o pacote '%.250s')nome de pacote inválido '%.250s' no ficheiro '%.250s' de 'triggers' adiadosnome de pacote inválido no campo '%s': %sgid statoverride inválido %smodo statoverride inválido %suid statoverride inválido %sestado inválidochecksum de cabeçalho tar inválidocampo checksum de cabeçalho tar inválidocampo gid de cabeçalho tar inválidocampo mtime do cabeçalho tar inválidocampo de tamanho de cabeçalho tar inválidocampo uid de cabeçalho tar inválidocabeçalho tar inválido com nome de campo vazionome '%.250s' de 'trigger' inválido: %.250sfalta um valorlinha não terminada ao tentar ler %slinha demasiado comprida ou não terminada ao tentar ler %so link %s é primário e slavea carregar o ficheiro control '%s' para o pacote '%s'a carregar o ficheiro de lista de ficheiros para o pacote '%s'desvio local de: %s
+desvio local de %sdesvio local de %s para %sdesvio local para: %s
+localmente desviado para: %s
+nomes de ficheiros longosscript '%.50s' do maintainer tem permissões erradas %03lo (devem ser >=0555 e <=0775)script '%.50s' do maintainer não é ficheiro de texto simples ou link simbóliconão é possível fazer stat ao script '%.50s' do maintainermalloc falhou (%zu bytes)modo manualficheiro mestreligação mestrepode ter problemas ao remover %s, porque disponibiliza %s ...não pode ser uma string vaziaa utilização de memória chegou ao limiteerro ao tentar desviar
+  quando a remover '%s'
+  foi encontrado '%s'erro no pacote
+  quando a remover '%s'
+  foi encontrado '%s'falta o campo '%s'falta colchete de fechoestão presentes uma mistura de instâncias de pacotes não-coinstaláveis e coinstaláveis; muito provavelmente devido a uma actualização a partir de um dpkg não-oficialmulti-arquitecturavários Conflicts e Replacesestão presentes várias instâncias de pacotes não-coinstaláveis; muito provavelmente devido a actualização a partir de um dpkg não-oficialvários statoverrides presentes para o ficheiro '%.250s'tem de ser chamado por um script do 'maintainer' (ou com uma opção --by-package)tem de começar por alfanuméricotem de começar com um caractere alfanuméricoo nome %s é primário e slaveé necessária uma opção de acçãodo pacote %s, novo script %snewline no campo do nome '%.*s'não é permitido newline no nome do objecto do arquivo '%.250s'não é permitido newline no nome da path '%s'newlines proibidas em ficheiros update-alternatives (%s)nenhum ficheiro 'control' no arquivo de controle!nenhuma alternativa para %snão está presente nenhum 'override'sem informação de pacotes em '%.255s'não está instalado nenhum pacote chamado '%s', não pode configurarnão foram encontrados pacotes coincidindo com %snão foi encontrado caminho coincidindo com o padrão %snão, %s é essencial, não irá desconfigurar
+ de modo a permitir %snão, não pode proceder com %s (--auto-deconfigure irá ajudar):
+%sa não verificar o conteúdo da área de controlosem privilégios suficientes para alterar o directório raiz com --force-not-root, considere utilizar --force-script-chrootless?não instaladonão instalado mas as configurações mantêm-sea não remover %s já que não é um symlinknão substituir %s por uma ligaçãonada após dois pontos no número de versãonome de pacote nulo na lista --%s separada por virgulas '%.250s'número de partes do arquivoutilizado o campo '%s' obsoletoopção '--%s' obsoleta, pacotes não disponíveis são automaticamente limpostipo de compressão obsoleta do tipo '%s'; utilize antes xztipo de compressão obsoleta do tipo '%s'; utilize antes xz ou gzipopção forçar/recusar obsoleta '%s'opção obsoleta '--%s'do pacote antigo %s, script %so antigo ficheiro de configuração '%.250s' era um directório vazio (e agora foi apagado)o ficheiro antigo '%.250s' é o mesmo que vários novos ficheiros! (ambos '%.250s' e '%.250s')a antiga versão do pacote tem um nome de ficheiro demasiado comprido começando por '%.250s'apenas podem ser utilizadas versões exactas para o campo '%s'abrir o componente '%.255s' (em %.255s) falhou de um modo inesperadosem memória para limpeza de nova entradasem memória para nova limpeza de entrada com muitos argumentossem memória para novo contexto de erroerro de contexto externo, a abortara ultrapassar problema porque --force está activo: o pacote %.250s já está instalado e configuradoo pacote %.250s não está pronto para configuração
+ não pode configurar (status actual '%.250s')o pacote %.250s não está pronto para processamento de trigger
+ (estado actual '%.250s' sem triggers pendentes)o pacote %s %s não pode ser configurado porque %s está numa versão diferente (%s)o pacote %s (%s) com campo '%s: %s' não é co-instalável com %s, que tem várias instâncias instaladaso pacote %s não pode ser configurado porque %s não está pronto (estado actual '%s')o pacote %s continha lista como ficheiro infoo pacote %s necessita de reinstalação, mas vai ser removido de qualquer modo conforme você pediuo pacote %s necessita de reinstalação, não irá removerO pacote %s estava em espera, a processá-lo na mesma conforme você pediuo pacote '%s' não está disponívelo pacote '%s' não está instaladoo pacote '%s' não está instalado e não está disponível informaçãoarquitectura de pacotea arquitectura do pacote (%s) não coincide com a do sistema (%s)a arquitectura do pacote está em falta ou vaziao pacote contém um ficheiro de info de control com o nome de ficheiro demasiado comprido (começando por '%.50s')a informação de controle do pacote contém o directório '%.250s'rmdir de info de controle do pacote '%.250s' não disse que não era um dirextração da informação de controloo pacote desvia outros para: %s
+extracção do valor do campo do pacotevalor de controlo MD5 do ficheiro de pacoteextracção do arquivo do pacote do sistema de ficheiroso pacote tem o campo '%s' mas é de arquitectura '%s'o pacote tem o campo '%s' mas falta-lhe a arquitecturao pacotes tem estado %s e tem ficheiros de configuração, a esquecê-loso pacote tem o estado %s mas não esperaram 'triggers'o pacote tem estado %s mas não há 'triggers' pendenteso pacote tem estado %s mas são esperados 'triggers'o pacote tem estado %s mas estão 'triggers' pendentesO pacote está num estado de inconsistência muito mau; deve
+ reinstalá-lo antes de tentar a remoção.O pacote está num mau estado de inconsistência; deve
+ reinstala-lo antes de tentar configura-lo.o pacote não pode conter novas linhasnome de pacote o nome de pacote '%s' é inválido: %so nome do pacote tem caracteres que não são caracteres alfanuméricos minúsculos nem '-+.'pacote não está na base de dados status ou available na linha %d: %.250sverificação de assinatura de pacotenúmero da versão de pacotepager para mostrar ficheirofalta a parte %dficheiro de parte '%.250s' não é um ficheiro comumo tamanho da parte ou é muito grande ou não é positivoo tamanho da parte tem de ser pelo menos %d KiB (para permitir o cabeçalho)cabeçalho tar parcialmente lidopassou
+colaro caminho não pode conter 'newlines'por favor especifique explicitamente --no-rename, a predefinição irá mudar para --rename na 1.20.xproblema de pré-dependência - a não instalar %.250sprioridadea prioridade está fora de alcancea prioridade tem de ser um inteiroprioridade de %s está fora de alcance: %sprioridade de %s: %scampo '%s' de quatro estados (estrangeiro/permitido/igual/não): %serro de leitura em %.250serro de leitura em '%.250s'erro de leitura no ficheiro de configuração '%.255s'erro de leitura na entrada standarderro de leitura em stdin na prompt do ficheiro de configuraçãoa ler o ficheiro de informação do pacote '%.255s'a ler o ficheiro de informação do pacote '%s' : %s'a ler ficheiro statoverride '%.250s'ficheiro de pacote re-montadoacerca de %s contendo %s, problema de pre-dependência:
+%sacerca de %s contendo %s:
+%sremoção de %.250sa remover a arquitectura '%s' actualmente em uso por outra base de dadosa remover alternativa seleccionada manualmente - a passar %s para modo automáticorenomear envolve sobre-escrever '%s' com
+  um ficheiro diferente '%s', não permitidorenomear: remover o link antigo duplicado '%s'a operação pedida necessita de privilégios de super-utilizadoré necessário acesso leitura/escrita ao directório %s da base de dados do dpkgé necessário acesso de escrita ao directório '%s' da base de dados dos dpkg para atualização em massanúmero da revisão está vaziocomando rm para limparraiz ou directório vazio está listado como conffilei no campo '%s'procurou, mas não encontrou pacotes (ficheiros coincidindo com *.deb)segundo (erro) palavra no campo '%s': %s<desconhecida>a configurar a selecção automática de %svárias entradas de informação de pacotes encontradas, apenas uma permitidacomando da shell para mover ficheirosmostrar a lista de pacotes no pagersaltar a criação de %s porque o ficheiro associado %s (do grupo de ligação %s) não existeficheiro escravoligação ao escravolink slave igual ao link principal %snome do escravoo ficheiro fonte '%.250s' não é um ficheiro simplesre-montagem de pacote divididoficheiro statoverride contém uma linha vaziafalta uma linha vazia no final do ficheiro statoverrideestadoregistador de estadoa cortar o caminho /subprocesso %s retornou erro do status de saída %do tamanho do link simbólico '%.250s' mudou de %jd para %zderro de sintaxe no ficheiro '%.250s' de 'triggers' de ficheiroerro de sintaxe no ficheiro statoverrideerro de sintaxe no ficheiro de 'triggers' adiados '%.250s' na linha %d, no caractere %zd '%s'leva um argumento, o nome do 'trigger'o alvo é um directório - não pode saltar a verificação do ficheiro de controleexistem diversas versões da parte %d - pelo menos '%.250s' e '%.250s'não existe script na nova versão do pacote - a desistirterceiro (status) palavra no campo '%s': %seste é um pacote essencial; não deve ser removidopara voltar às actualizações automáticas utilize '%s --auto %s'valores a menos no campo '%s' de detalhes de arquivo (comparado com outros)demasiados erros, a parardemasiados erros encadeados durante a recuperação de errosdemasiados valores no campo '%s' de detalhes de arquivo (comparado com outros)linha demasiado comprida ou falta 'newline' em '%.250s'a raiz da navegação %s não é um directórioerro de sintaxe do ficheiro de interesse, '%.250s', do 'trigger'; nome '%.250s': ilegal de pacote: %.250so nome do 'trigger' '%s' é inválido: %so nome do 'trigger' contém um carácter inválidoainda não existem registos de 'trigger'accionado o triggero ficheiro '%.250s' de triggers ci contém sintaxe ilegal de trigger no trigger com o nome '%.250s': %.250so ficheiro de triggers ci contém a directiva '%.250s' desconhecidao ficheiro de triggers ci contém sintaxe com directiva desconhecidao directório de dados de 'triggers' ainda não foi criadolock da base de dados de triggerstriggers em loop, abandonadoem vez disso a tentar script do novo pacote ...a tentar sobre-escrever '%.250s', que também está no pacote %.250s %.250sa tentar sobre-escrever '%.250s', que é a versão desviada de '%.250s'a tentar sobreescrever '%.250s', que é a versão desviada de '%250s' (pacote: %.100s)a tentar sobre-escrever o directório '%.250s' no pacote %.250s %.250s com um não directórioa tentar sobreescrever '%.250s' partilhado, que é diferente de outras instâncias do pacote %.250sdois comandos especificados: --%s e --%snão foi possível (re)abrir ficheiro de entrada de parte '%.250s'não foi possível aceder ao directório '%s' da base de dados do dpkg para actualização em massanão foi possível aceder ao directório %s da base de dados do dpkgnão foi possível mudar o dono do ficheiro de destino '%.250s'não foi possível verificar a existência de '%.250s'não foi possível verificar o estado de bloqueio do ficheiro '%s'não foi possível verificar a existência do repositório '%.250s'não foi possível verificar o lock ao ficheiro do direct+orio %s da base de dados do dpkgnão foi possível fazer chown a backup do link simbólico para '%.255s'não foi possível efectuar uma limpeza à volta de '%.255s' antes de instalar outra versãonão foi possível fechar o ficheiro '%s'não foi possível fechar o novo ficheiro '%.250s'não foi possível fechar o novo ficheiro '%.250s' de 'triggers' adiadosnão foi possível fechar o status actualizado de '%.250s'não foi possível criar '%.255s'não conseguiu criar '%.255s' (enquanto processava '%.255s')não foi possível criar o ficheiro '%s'não foi possível criar o novo ficheiro '%.250s'não foi possível criar directório temporárionão foi possível criar o directório, '%.250s',  de estado de 'triggers'não foi possível remover o ficheiro de informações de controle '%.250s'não foi possível apagar o directório antigo '%.250s': %snão foi possível apagar ficheiro depot utilizado em cima '%.250s'não foi possível descartar '%.250s'não foi possível executar %s (%s)não foi possível preencher %.250s com enchimentonão foi possível esvaziar %.250s após enchimentonão foi possível fazer flush ao ficheiro '%s'não foi possível fazer flush ao novo ficheiro '%.250s'não foi possível esvaziar o status actualizado de '%.250s'não foi possível fazer fstat ao ficheiro fontenão foi possível fazer fsync ao status actualizado de '%.250s'não foi possível obter descriptor de ficheiro para o directório '%s'não foi possível ignorar o sinal %s antes de correr %.250sNão foi possível instalar '%.250s' como '%.250s'não foi possível instalar (o suposto) novo ficheiro info '%.250s'não foi possível instalar o novo ficheiro info '%.250s' como '%.250s'não foi possível instalar novo ficheiro de 'triggers' adiados '%.250s'não foi possível instalar nova versão de '%.255s'não foi possível instalar o status actualizado de '%.250s'não foi possível bloquear %snão foi possível fazer backup link de '%.255s' antes de instalar a nova versãonão foi possível criar backup do link simbólico para '%.255s'não foi possível mover '%.255s' para instalar a nova versãonão foi possível abrir '%.255s'não foi possível abrir o directório '%s'não foi possível abrir o ficheiro '%s'não foi possível abrir novo ficheiro depot '%.250s'não foi possível abrir o ficheiro de saída '%.250s'não foi possível abrir o ficheiro fonte '%.250s'não foi possível abrir o directório temporário de controlenão foi possível abrir o ficheiro de triggers ci '%.250s'não foi possível abrir o ficheiro de 'triggers' adiados '%.250s'não foi possível abrir/criar o ficheiro de lock da base de dados do dpkg para o directório %snão foi possível abrir/criar o lock do frontend para o directório %snão foi possível abrir/criar novo ficheiro de 'triggers' adiados '%.250s'não foi possível abrir/criar o ficheiro de lock para triggers '%.250s'não foi parse ao timestamp '%.255s'não foi possível ler o directório depot '%.250s'não foi possível ler o ficheiro '%.250s' de 'triggers' de ficheironão foi possível ler flags de filedescriptor para %.250snão foi possível ler link '%.255s'não foi possível ler o ficheiro de parte '%.250s'não foi possível remover '%s'não foi possível remover cópia de backup de '%.250s'não foi possível remover o ficheiro fonte copiado '%s'não foi possível remover versão de '%.250s' recentemente extraídanão foi possível remover a versão acabada de instalar de '%.250s'não foi possível remover versão recentemente instalada de '%.250s' para permitir re-instalação de cópia backupnão foi possível remover o ficheiro de info obsoleto '%.250s'não foi possível renomear o novo ficheiro depot '%.250s' para '%.250s'não foi possível re-abrir ficheiro dividido '%.250s'não foi possível restaurar versão de backup de '%.250s'não foi possível criar, em segurança, '%.250s'não foi remover, em segurança, '%.255s'não foi possível remover o antigo ficheiro '%.250s' em segurança: %snão foi possível executar seek para o inicio de %.250s após enchimentonão foi possível estabelecer buffer no ficheiro de base de dados %snão foi possível activar flag close-on-exec para %.250snão foi possível definir permissões de execução em '%.250s'não foi possível definir o modo do ficheiro de destino '%.250s'não foi possível fazer setenv para o script do maintainernão foi possível fazer setenv para sub-processosnão foi capaz de stat %s '%.250s'não foi possível o stat %s '%.250s': %snão foi possível fazer stat '%.250s'não foi possível fazer stat ao directório controlnão é possível fazer stat ao ficheiro de configuração '%.250s' actualmente instaladonão foi possível fazer stat do novo conffile distribuído '%.250s'Não foi possível fazer stat a outro novo ficheiro '%.250s'não foi possível fazer stat ao recuperado '%.255s' antes de instalar outra versãonão foi possível fazer stat ao ficheiro fonte '%.250s'não foi possível fazer stat ao ficheiro de 'triggers' adiados '%.250s'não foi possível fazer sync ao directório '%s'não foi possível sync ao ficheiro '%.255s'não foi possível fazer sync ao ficheiro '%s'não foi possível fazer sync ao ficheiro '%.250s'não foi possível truncar para o status actualizado de '%.250s'não foi possível desbloquear %snão foi possível escrever o ficheiro '%s'não foi possível escrever o novo ficheiro '%.250s'não foi possível escrever o novo ficheiro de 'triggers' adiados '%.250s'não foi possível escrever o status fd %dnão foi possível escrever o status actualizado de '%.250s'aspas não coincidentes em '%s'erro inesperado de bzip2dados inesperados após pacote e selecção na linha %dfim de ficheiro inesperado após nome de pacote na linha %dfim de ficheiro inesperado antes do fim da linha %dfim de ficheiro inesperado em %s em %.255sfim de ficheiro inesperado no nome de pacote, na linha %dfim de ficheiro ou stream inesperadofim de ficheiro inesperado ao ler '%.250s'fim de ficheiro inesperado ao tentar ler %sfim de entrada inesperadofim de linha inesperado após nome de pacote na linha %dfim de linha inesperado no nome de pacote na linha %dfim de linha inesperado no ficheiro statoverridenome de caminho %s pré-existente inesperadoargumento desconhecido '%s'estratégia de compressão desconhecidaestratégua de compressão desconhecida '%s'!compressão desconhecida tipo '%s'!versão de formato deb desconhecida %sopção desconhecida de forçar/recusar '%.*s'opção desconhecida '%s'opção desconhecida -%copção desconhecida --%sgrupo de sistema '%s' desconhecido no ficheiro statoverride; o grupo de
+sistema foi removido antes do override, o que provavelmente será um bug do
+empacotamento, para recuperar pode remover o override manualmente com %sutilizador de sistema '%s' desconhecido no ficheiro statoverride; o
+utilizador de sistema foi removido antes do override, o que provavelmente
+será um bug do empacotamento, para recuperar pode remover o override manualmente com %scabeçalho tar desconhecido de tipo '%c'formato de saída '%s' de verificação desconhecidoestado procurado desconhecido na linha %d: %.250sdescompactado mas não configuradoerro fatal irrecuperável, a abortarcabeçalho GNU tar não suportado, tipo '%c'cabeçalho PAX tar tipo '%c' não suportadotipo de cabeçalho Solaris tar tipo '%c'predefinição de compressão não suportadatipo de compressão '%s' não suportada com compressão uniformeopções não suportadas no ficheiro headertipo desconhecido de verificação de integridadeactualiza o directório contendo o ficheiro %.250s' cujo nome é demasiado longo (comprimento=%d, max=%d)actualiza o directório que contém ficheiros com diferentes comprimentos de nomes (ambos %d e %d)a actualizar a alternativa %s porque a ligação do grupo %s alterou os links slaveo utilizador '%s' não existenome do campo definido pelo utilizador '%.*s' é muito pequenoa usar %s para disponibilizar %s (%s) em modo autoa usar %s para disponibilizar %s (%s) em modo manualo valor para o campo '%s' tem uma linha que começa por um não-espaço '%c'o valor para '%s' tem uma linha mal formatada '%.*s'valor para o campo '%s' não é permitido neste contextoa verificação do pacote %s falhou!a verificação do pacote %s falhou; mas a instalar à mesma conforme você pediu<nenhuma>versão %.250s de %.250s já está instalado, a saltarversão '%s' tem sintaxe erradaversão '%s' tem sintaxe errada: %snúmero de versão não começa com um dígitonúmero de versão está vaziostring de versão contém espaçosstring de versão está vaziaProvides com versõesfalhou a espera para o subprocesso %swait para o sub-processo %s falhouavisoenquanto lia %s: %sao remover %.250s, o directório '%.250s' não estava vazio, por isso não foi removidoao remover %.250s, não foi possível remover o directório '%.250s': %s - o directório poderá ser um ponto de montagem?Não irá fazer downgrade de %.250s de %.250s para %.250s, a saltarpalavra no campo '%s': %ssim, irá desconfigurar %s (estragado por %s)sim, irá remover %s em favorecimento de %snão tem permissão para lock ao directório %s da base de dados do dpkgtem de especificar pacotes pelos seus próprios nomes, não por transcrever os nomes dos ficheiros em que eles vêm
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/quot.sed dpkg-1.20.7.1/po/quot.sed
--- dpkg-1.20.7.1-orig/po/quot.sed	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/quot.sed	2021-06-09 18:22:47.474275400 -0500
@@ -0,0 +1,6 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
diff -Naurp dpkg-1.20.7.1-orig/po/remove-potcdate.sin dpkg-1.20.7.1/po/remove-potcdate.sin
--- dpkg-1.20.7.1-orig/po/remove-potcdate.sin	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/remove-potcdate.sin	2021-06-09 18:22:47.474275400 -0500
@@ -0,0 +1,25 @@
+# Sed script that removes the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# Copyright (C) 2002 Free Software Foundation, Inc.
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff -Naurp dpkg-1.20.7.1-orig/po/ro.gmo dpkg-1.20.7.1/po/ro.gmo
--- dpkg-1.20.7.1-orig/po/ro.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/ro.gmo	2021-06-09 18:25:15.706504576 -0500
@@ -0,0 +1,398 @@
+��L|�$(1?)1ai1=�1&	202-D3.r3�3.�3�3 �344S45o4-�4.�405135$e54�5/�5�5(6$06U6u6:�66�617197!k7(�7�7�7�7�7S8[8z8)�89�8.�8'%9&M9t93�95�9�9�9[:Uc:�:�:�:�:;;!;0;E;V;=e;R�;1�;'(<&P<(w<'�<+�<4�<!)=,K=9x=-�=�=#�=">$A>f>"�>�>!�>#�>2
+?1=?o?.�?�?-�?H�?QG@A�@e�@fAA7�A<�ABB0BsB�B
�B �B�B5�B1#CUCgC#�C!�C�C�CKD5LD-�D!�D�D-�D E5;EqE,�E.�E.�EFH4F6}F(�F>�F$G AGbGiGuG��G6H#CH-gH�H�H�H�H<�H�I�I[�IgJ
�K�L<�M.�MN0,N3]N1�N�N�N��N*�O2�O��OV�Q-�Q/R
IR]WR�R!�R�RG�R8:S,sS�S(�S�S�S�S:TVCT �T�T-�T	�TUU0UMU�TU�%V��V��W��X�LYu�Y&nZ{�Z[�0[ �[5�[,\$8\,]\�\u�\�]�]�]�]4^4;^p^�^6�^!�^	�^._,0_]_|_%�_�_%�_!`")`&L`s`�`;�`3�`a2aAMa�a&�a"�a�aEb,Tb"�b!�b5�b �bc-<c5jc,�cG�c$d:d7Sd�d*�d"�d�de)e?e"[e~e�e=�e*�eJfOf"af�f�f-�f)�f%g9g?g^gdgxg)�g�g�g!�g!h9h%Vh%|h'�h,�h�h*i?i!Tivi �i-�i#�i+j%2j$Xj}j �j�j�j:�jk8kTkqk$�k�k�k�k�k#l8lPl!pl:�l�l5�l "m2Cm%vm�m0�m*�m/n6HnVn<�n.o(Bo+ko)�o4�o4�o;+p<gp:�p7�p0q;Hq?�q$�qA�q$+r!Prrrc�r�r:s<Ms=�s�s�s$�s\t&lt&�t'�t �t'u4+u)`u�u	�uk�u/v$Gv#lv&�v!�v"�v^�v@[w�w%�w+�w7�w!5xWxqx�x�x�x�xO�x83y*ly�y�y�y�y7�y5zAz0az!�z�z�z5�z"{4@{
u{ �{%�{G�{P|Gc|?�|#�|7}+G}2s}Y�}f~&g~4�~F�~1
+;<x�.�.� �0�D=�����&��-Ӏ7�9�A�.G�v������Á)ځ�&!�H�a�Bs�H��&��0&�6W�4��
+Ã
+΃ك
+��%�%*�*P�{���+��+Ä!�$�46�Fk�@��,�R �'s�	��Z��4�25�h�D��GɇY�Qk�%��+�2�%B�%h�1��+��N�;�3U�*����5Ί$�2)�+\�+��,�����"�$9�^�*x���*��0�&�3B�4v�5��)�,�D8�*}�4��ݎ��&�#5�#Y�%}�(��.̏9��'5�*]�.����!Ԑ(��4�4T�[��,�4�#G�,k�"��"��/ޒ/�+>�+j�-��*ē&��1�P� h�2��0��&�B�#W�.{���Ǖ1���3,�`�*����Ŗ6ܖ&�.:�4i�1��+З���"1�T�h�{�(����SԘM(�(v�"��ڙ���`�`v��ךM��|��@q�'��)ڝ1�;6�r�3����՟C�7�@O�6��3Ǡ5��?1�)q�4��.С��6�)P� z���J��=�4A�0v�'��4ϣ�"�B�Q�{^�(ڤ%�=)�Cg�@��9�6&�]�5z�9�������~���+�?�L�
g�u�������ƨZר�2�P��/�.7�.f�-��9êC��,A�Dn�D��>��#7�-[�$��.��"ݬ,�#-�'Q�-y�K��M�"A�Ld���9ϮZ	�td�Vٯ�0����D<�N��бA��/�N�n�"����4²8��0�F�2c�(��$��!�R�BY�7��#Դ��6� K�6l���2��3�-�%M�Fs�F��7�[9�"��$��ݷ����ȸ(׸;�<�M�^�p�G���͹p������?��U�\@�A��߿@��F9�H����	�����+��A������A��1���X4���6����R��G1�2y���1�����
+�>"��a�.���<&�	c�m���(�����������m��^��<������0�����)s����)=�Ag�<��*��<�N��W�
������G&�Cn���$��<��./�^�>j�=��2��,�1G�,y�1��;��4�<I� �� ��q��P:�+��*��U��+8�9d�.��(��P��3G�7{�7��F��#2� V�/w�E��2��_ �)�� ��K��4�/L�)|�#��$��!��+�6=�t�	��c��3��a3���1��"��*�B.�4q�'����!����"�� !�=B�+��-��+��.�$5�3Z�0��<��=��+:�:f���-��'��#�E3�3y�A��3��8#�*\�'������]��I�d� �� ��.�����*�D�4^���,��,��N�0Z�B��-��L��4I�%~�B��=��G%�Om����e>�=��(��D�5P�X��D��^$�h��J��N7�R��L��c&�/��^��/�+I�5u����*A�Ol�S��c�
t�"��.�����,��-��-��)�)E�Do�=�������@��(��)�-2�(`�)�����Y?���1��5��E�1W�����&�����)�nD�Z��>�
+M�X�g�x�W��H��1�BQ�*��%��0��J�1a�G��
+��0��/�RG�s��\�Pk�7��J��8?�1x�j����2��>��Z>p<�)�;,>h,��R�9X;l9�S�
+6A9J
+�-���!�:(MBv��I�\39�;�@VG
��9�
+�<,?Cl��8�F-O-}K�R�EJ	B�	x�	3L
+
+�
+w�
+MOQ,�R�a!u�c�0]
:�
A�
0:<4wT�\)^I�;�C,&pG�D�5$:Z$��&�:�(8=a'�=�90?>pB�H�4;:pf�ODb�.�6�4+2`/�?�FNJ0�@�A'M-u;�=�?s]9�K3W@�0�0�J.EyA�7897r+�%�)�(&+OE{8�2�Q-3G�,�'(BP$�F��8 )W � 8� 2� C!BL!@�!9�!
+"%'"5M"�"�"�"-�"#m"#_�#;�#!,$N$*g$�$�${�$l4%�RK ���N�$��j�"u!���
+������\*���Q7*����=TJX/�O��ZfGC��;��k���o-��vh���E����[������$��5��m�p��K�	q�������"6�eZr������\(?�Y"@3���J;Bc�ts=BC��'�Hn]q>o.�+vO��w:�V�4UB/ ��g�K�28&)?W�H�j<����6�_�I#��:�%fY�S��5/�%
@��2,�~�T<|�%X������r}�1��3���!�W�2�MD*��x���`&G�}|�.'9�',D
+�
i�(�����L����������4S9��F��<I-��{A7~JRE��>9n5�a����D��E	{�����H�N�bb��Ua8�0����6�]���#�7�l8���;��G(AhA ���)p!Ld����0.w���Iz1����Ms
���:C��)���������_�uQ`+k�F�#����	y��@�������[>z��Ve���0�^$1cF&m�?
+��i�d^�3�l�y4P,���P��-�L=+�x�g�t��
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s depends on %s%s enhances %s%s pre-depends on %s%s recommends %s%s suggests %s%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available), core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s requires one or more part file arguments--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Alternative %s unchanged because choice %s is not available.Another process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+Authenticating %s ...
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+DescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Errors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Information about %d package was updated.
+Information about %d packages was updated.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+Leaving '%s'
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Nothing to configure.Package %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPriorityProcessing was halted because there were too many errors.
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Removing '%s'
+Replacing available packages info, using %s.
+SelectionSetting up %s (%s) ...
+Skip invalid line: %sSkip unknown alternative %s.StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use --help for help about querying packages.VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+[default=N][default=Y][no default]alternative link is not absolute as it should be: %salternative path is not absolute as it should be: %sany diversion of %sany diversion of %s to %sarchive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerauto modeawaiting trigger processing by another packagebroken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot divert file '%s' to itselfcannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')cannot stat file '%s'character '%c' not allowed (only letters, digits and characters '%s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file contains %ccould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdiversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+dpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is not numbererrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror opening conffiles fileerror opening configuration directory '%s'error reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to '%s'error writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind trigger interest file '%.250s'failed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'fgets gave an empty string from '%.250s'field name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+file may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefork failedformat version numbergenerated corrupt ar header for '%s'ignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!illegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal pending trigger name '%.255s': %sinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemanual modemaster filemaster linkmay not be empty stringmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'multiple Conflicts and Replacesmultiple statoverrides present for file '%.250s'name %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s contained list as info filepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage diverts others to: %s
+package file MD5 checksumpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepre-dependency problem - not installing %.250sprioritypriority must be an integerpriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package fileremoval of %.250sremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filestatoverride file contains empty linestatoverride file is missing final newlinestatusstripping trailing /subprocess %s returned error exit status %dsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving uptoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers looping, abandonedtrying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove backup copy of '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync file '%.255s'unable to sync file '%s'unable to truncate for updated status of '%.250s'unable to write file '%s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file while trying to read %sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?you must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:52+0200
+Last-Translator: ioan-eugen STAN <stan.ieugen@gmail.com>
+Language-Team: Romanian <debian-l10n-romanian@lists.debian.org>
+Language: ro
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: Lokalize 1.0
+Plural-Forms: nplurals=3; plural=n==1 ? 0 : (n==0 || (n%100 > 0 && n%100 < 20)) ? 1 : 2;
+
+ declanșatori în așteptare ai pachetelor care ar putea fi nerezolvabili:
+
+Fișierul de configurare „%s”, nu există în sistem.
+Se instalează noul fișier de configurare, așa cum ați cerut.
+     Versiunea din pachet este aceiași ca la ultima instalare.
+     nu este fișier simplu     %.255s
+   Ce doriți să faceți în această privință? Opțiunile sunt:
+    Y sau I : instalați versiunea responsabilului de pachet
+    N sau O : păstrați versiunea curent instalată
+      D     : afișați diferențele dintre versiuni
+      Z     : deschideți un shell pentru a examina situația
+  %.250s (versiunea %.250s) este prezent și %s.
+  %.250s (versiunea %.250s) este pe cale să fie instalat.
+  %.250s este %s.
+  %.250s este instalat, dar este versiunea %.250s.
+  %.250s nu este instalat.
+  %.250s va fi deconfigurat.
+  %.250s este pe cale să fie instalat, dar este versiunea %.250s.
+  %.250s va fi șters.
+  %.250s este despachetat, dar nu a fost configurat niciodată.
+  %.250s este despachetat, dar este versiunea %.250s.
+  %.250s ultima versiune configurată este %.250s.
+  %.250s furnizează %.250s și este prezent și %s.
+  %.250s furnizează %.250s și este pe cale să fie instalat.
+  %.250s furnizează %.250s dar este %s.
+  %.250s furnizează %.250s dar va fi deconfigurat.
+  %.250s furnizează %.250s dar va fi șters.
+  %s (%s) furnizează %s
+  Pachetul %s așteaptă procesarea declanșatorilor.
+  Pachetul %s nu este configurat încă.
+  Pachetul %s nu este instalat.
+  Pachetul %s va fi șters.
+  Pachetul %s care furnizează %s așteaptă procesarea declanșatorilor.
+  Pachetul %s care furnizează %s nu este configurat încă.
+  Pachetul %s care furnizează %s nu este instalat.
+  Pachetul %s care furnizează %s va fi șters.
+  Versiunea lui %s în sistem este %s.
+  Versiunea lui %s care va fi configurată este %s.
+ legătura este absentă acum legătura indică acum spre %s  sclav %s: %s %d în %s:  %d pachet, din următoarea secțiune: %d pachete, din următoarele secțiuni: %d de pachete, din următoarele secțiuni:  %s (%s) îl corupe pe %s și este %s.
+ %s (nu este un fișier propriu-zis)
+ ==> Implicit se păstrează vechiul fișier de configurare.
+ ==> Distribuitorul pachetului a furnizat o versiune actualizată.
+ ==> Se folosește actualul fișier vechi, așa cum ați cerut.
+ ==> Implicit se folosește noul fișier de configurare.
+ ==> Se folosește noul fișier, așa cum ați cerut.
+ Pachetul %s: partea(țile)  Acțiunea implicită este instalarea noii versiuni.
+ Acțiunea implicită este păstrarea versiunii curente.
+ și  depinde de %d fișier sau director actualmente instalat.)
+%d fișiere și directoare actualmente instalate.)
+%d de fișiere și directoare actualmente instalate.)
+lipsește %d componentă de control cerutălipsesc %d componente de control cerutelipsesc %d de componente de control cerute%s (subproces): %s
+%s - prioritatea %d%s corupe %s%s este în conflict cu %s%s corupt: %s%s depinde de %s%s îmbunătățește %s%s ante-depinde de %s%s recomandă %s%s sugerează %s%s: fișierul conffile „%.250s” nu este fișier sau legătură simbolică (= „%s”)%s: fișierul conffile „%.250s” arată către un nume de fișier degenerat
+ („%s” este legătură simbolică spre „%s”)%s: fișierul de configurare „%s” este o legătură circulară
+ (= „%s”)%s: eroare la legarea intrării la fluxul bzip2%s: eroare la legarea intrării de fluxul gzip%s: eroare la legarea ieșirii cu fluxul bzip2%s: eroare la legarea ieșirii de fluxul gzip%s: eșec la legarea lui „%.250s” la „%.250s”: %s%s: eșec la ștergerea „%.250s” (înainte de suprascriere): %s%s: eșec la ștergerea lui „%.250s”: %s%s: eșec la ștergerea vechii copii de siguranță „%.250s”: %s%s: eșec la ștergerea vechii versiuni distribuite „%.250s”: %s%s: eșec la redenumirea lui „%.250s” în „%.250s”: %s%s: eroare internă bzip2 de citire%s: eroare internă bzip2 de citire: „%s”%s: eroare internă bzip2 de scriere%s: eroare internă bzip2 de scriere: „%s”%s: eroare internă gzip la citire%s: eroare internă gzip la citire: „%s”%s: eroare internă gzip la scriere%s: eroare internă gzip la scriere: %s%s: eroare internă gzip la scriere: „%s”%s: readlink imposibil pentru fișierul conffile „%s”
+ (= „%s”): %s%s: stat imposibil pentru fișierul de configurare „%s”
+ (= „%s”): %s„%s” se ciocnește cu „%s”„%s” conține o valoare definită de utilizator pentru Priority „%s”„%s” nu ia nici o valoarecâmpul „%s”, nume nevalid de pachet „%.255s”: %scâmpul „%s”, lipsește numele pachetului sau gunoi unde se aștepta numele pachetuluicâmpul „%s”, referitor la „%.255s”:
+ „%c” este învechit, folosiți în schimb „%c=” sau „%c%c”câmpul „%s”, referință la „%.255s”:
+ relație incorectă cu o versiune %c%ccâmpul „%s”, referitor la „%.255s”:
+ potrivire implicită exactă a numărului versiunii, sugerăm folosirea „=” în loccâmpul „%s”, referitor la „%.255s”:
+ valoarea versiunii nu începe cu caracter alfanumeric, sugerăm adăugarea unui spațiucâmpul „%s”, referință la „%.255s”: versiune neterminatăcâmpul „%s”, eroare sintactică după referința la pachetul „%.255s”„%s” necesită o valoare(Se notează dispariția lui %s, care a fost înlocuit complet.)
+(Se citește baza de date ... (nici o descriere disponibilă), s-a aruncat nucleulopțiunea -%c nu ia nici o valoareopțiunea -%c ia o valoare--%s --pending nu ia argumente care nu sunt opțiuni--%s --recursive necesită cel puțin o cale ca argument--%s necesită <nume>--%s necesită <nume> <cale>--%s necesită un nume de fișier .deb ca argument--%s necesită un <director> ca argument--%s necesită un argument <fișier>--%s necesită un singur argument--%s necesită un director țintă.
+Poate ar trebui să folosiți dpkg --install ?--%s necesită cel puțin un fișier-arhivă de pachet ca argument--%s necesită cel puțin un nume de pachet ca argumentopțiunea --%s nu ia nici o valoareopțiunea --%s ia o valoare--%s necesită unul sau mai multe părți ca argumente--%s ia cel mult două argumente--%s ia cel mult două argumente (.deb și directorul)--%s nu ia argumente--%s ia doar un argument (numele fișierului .deb)--auto necesită exact un fișier parte ca argument--auto necesită folosirea opțiunii --output--compare-versions relație nevalidă--compare-versions ia trei argumente: <versiune> <relație> <versiune>--search necesită cel puțin șablonul numelui de fișier ca argument--split necesită un nume de fișier sursă ca argument--split ia ca argumente cel mult un nume de fișier sursă și un prefix pentru destinațies-a dat --update dar %s nu există--update este inutil pentru --remove.../%s; dar:
+<comprimare> din tar -cf<deb> este numele de fișier al unei arhive în format Debian.
+<cfile> este numele unei componente fișier administrativ.
+<cfield> este numele unui câmp în fișierul „control” principal.
+
+<decomprimare><legătură> și <cale> nu pot fi la fel<descriptorul-fișier pentru starea pachetului și progres><standard error><standard input><standard output>Se adaugă „%s”
+Alternativa %s neschimbată deoarece opțiunea %s nu este disponibilă.Un alt proces a blocat baza de date pentru scriere și ar putea să o modifice
+în acest moment. Unele din problemele următoare ar putea fi din această
+cauză.
+Se autentifică %s ...
+Comenzi:
+  --check-supported                Verifică dacă actualul dpkg are suport
+                                     pentru declanșatori.
+
+Comenzi:
+  -s|--split <fișier> [<prefix>]   Separă o arhivă.
+  -j|--join <parte> <parte> ...    Îmbină părțile.
+  -I|--info <parte> ...            Afișează informații despre o parte.
+  -a|--auto -o <complet> <parte>   Auto-acumulează părțile.
+  -l|--listq                       Listează bucățile nepotrivite.
+  -d|--discard [<numefișier> ...]  Renunță la bucățile nepotrivite.
+
+Comenzi:
+  [--add] <fișier>           adaugă o redirectare.
+  --remove <fișier>          șterge redirectarea.
+  --list [<glob-pattern>]    arată redirectările de fișiere.
+  --listpackage <fișier>     arată ce pachet are o redirectare pentru fișier.
+  --truename <fișier>        arată fișierul redirectat.
+
+Operatorii de comparare pentru --compare-versions sunt:
+  lt le eq ne ge gt       (lipsa versiunii înseamnă versiune anterioară oricărei versiuni);
+  lt-nl le-nl ge-nl gt-nl (lipsa versiunii înseamnă versiune posterioară oricărei versiuni);
+  < << <= = >= >> >       (doar pentru compatibilitate cu sintaxa fișierului de control).
+
+Debian „%s”, program de administrarea a pachetelor, unealta de interogare versiunea %s.
+Debian %s, unealta pentru declanșatori de pachete versiunea %s.
+Debian %s versiunea %s.
+Debian „%s”, backend pentru arhiva de pachete versiunea %s.
+Debian „%s”, programul de administrare a pachetelor versiunea %s.
+Debian „%s”, unealta de separare/îmbinare de pachete versiunea %s.
+Șters %s.
+DescriereDorit=necUnoscut/Instalează/șteRge/curăță(P)/păstrează(H)
+| Stare=Ne/Inst/fișCfg/desfăcUt/jum-conF/jum-inst(H)/așteaptă-decl(W)/decl-în-aștepT
+|/ Ero?=(nimic)/Reinst-nec (St,Ero: majuscule=rău)
+Erori întâlnite în timpul prelucrării:
+Fișierul „%.250s” nu este parte dintr-o arhivă multivolum.
+Sintaxa pentru format:
+  Un șir de formatare care va fi folosit pentru fiecare pachet. Formatul
+  poate conține secvențele standard de citare \n (newline), \r (carriage
+  return) sau \\ (backslash). Informațiile despre pachet pot fi incluse
+  prin inserarea de referințe variabile la câmpurile pachetului, folosind sintaxa
+  ${var[;width]}. Câmpurile vor fi aliniate la dreapta în cazul în care lățimea nu
+  este negativă. În acel caz se va folosi aliniere la stânga. 
+Informațiile despre %d pachet au fost actualizate.
+Informațiile despre %d pachete au fost actualizate.
+Informațiile despre %d de pachete au fost actualizate.
+Se instalează noua versiune a fișierului de configurare %s ...
+Fișiere inutile lăsate în directorul depozit:
+Se părăsește „%s”
+Au fost despachetate mai multe copii ale pachetului %s!
+ Va fi configurat doar o dată.
+NumeNu există redirectare „%s”, nu s-a șters nimic.
+Nimic de configurat.Pachetul %s este reținut, nu se atinge. Folosiți --force-hold pentru al forța.
+Pachetul %s este listat de mai multe ori, va fi procesat doar o dată.
+Pachetul „%s” nu conține nici un fișier (!)
+Pachete ne-reasamblate încă:
+Partea %d pachetului %s umplută (încă se vrea Calecâmpul Pre-DependsPrioritatePrelucrarea a fost oprită deoarece au fost prea multe erori.
+Se asamblează pachetul %s din %d parte: Se asamblează pachetul %s din %d părțiSe asamblează pachetul %s din %d de părțiInformații înregistrate despre %s de la %s.
+Se șterge „%s”
+Se înlocuiește info cu pachetele disponibile folosind %s.
+SelecțieSe pregătește %s (%s) ...
+Omite linie nevalidă: %sOmite alternativa necunoscută „%s”.StareUrmătoarele pachete așteptă procesarea unor declanșatori pe care i-au
+activat în alte pachete. Această procesare poate fi cerută folosind
+dselect sau dpkg --configure --pending (sau dpkg --triggers-only):
+Următoarele pachete sunt nefuncționale datorită unor probleme
+grave apărute la instalare. Ele trebuie reinstalate (și toate
+pachetele care depinde de ele) pentru a funcționa corespunzător:
+Următoarele pachete sunt configurate doar pe jumătate, probabil datorită 
+unor probleme la prima lor configurare. Configurarea ar trebui reîncercată 
+folosind dpkg --configure <pachet> sau opțiunea configurare din meniul lui dselect:
+Următoarele pachete sunt instalate doar pe jumătate, datorită problemelor din 
+timpul instalării. Instalarea probabil poate fi terminată dacă se repetă.
+Pachetele pot fi șterse folosind dselect sau dpkg --remove:
+Următoarele pachete au fost declanșate, dar procesarea declanșatorilor nu
+s-a efectuat încă. Procesarea declanșatorilor poate fi cerută folosind
+dselect sau dpkg --configure --pending (sau dpkg --triggers-only):
+Următoarele pachete au fost despachetate dar încă nu au fost configurate.
+Ele trebuie configurate folosind dpkg --configure sau opțiunea configurare din
+meniul programului dselect, pentru a fi funcționale:
+Există %d opțiune pentru alternativa %s (furnizează %s).Există %d opțiuni pentru alternativa %s (furnizează %s).Există %d de opțiuni pentru alternativa %s (furnizează %s).Nu există nici un program care să furnizeze %sAcest program este software liber; vedeți GNU General Public Licence versiunea 2 sau
+ulterioară pentru condițiile de copiere. NU există nici o garanție.
+Tastați „exit” când ați terminat.
+Tastați dpkg-deb --help pentru ajutor despre manipularea fișierelor *.deb;
+Tastați dpkg --help pentru ajutor despre instalarea și dezinstalarea pachetelor.Tastați dpkg-split --help pentru ajutor.Tastați dpkg-trigger --help pentru ajutor despre acest utilitar.Se actualizează info cu pachetele disponibile folosind %s.
+Utilizare: %s [<opțiune> ...] <comanda>
+
+Folosiți --help pentru ajutor despre interogarea pachetelorVersiuneO versiune de dpkg cu suport funcțional pentru %s nu este configurată încă.
+ Folosiți „dpkg --configure dpkg” și apoi încercați din nou.
+La adăugare implicite sunt --local și --divert <original>.distrib.
+La ștergere --package sau --local și --divert trebuie să se
+potrivească dacă sunt specificate.
+Scripturile preinst/postrm din pachete ar trebui să specifice
+întotdeauna --package și --divert.
+[implicit=N][implicit=Y][nimic implicit]legătura alternativă nu este absolută așa cum ar trebui să fie: %scalea alternativă nu este absolută așa cum ar trebui să fie: %sorice redirectare a lui %sorice redirectare a lui %s către %sarhiva conține obiectul „%.255s” de tip necunoscut 0x%xarhiva nu conține caractere newline în antetmod automatașteaptă procesarea declanșatorilor de către un alt pachetdeteriorat datorită eșecului la îndepărtare sau instalaredeteriorat datorită eșecului scriptului postinstnu se poate instala varianta necunoscută %smmap imposibil pentru fișierul info „%.255s”nu se poate înlătura vechiul script postrmstat imposibil pentru fișierul info „%.255s”nu se poate redirecta fișierul „%s” către el însușinu se poate deschide „%.255s” (în „%.255s”)nu se poate deschide fișierul parte de arhivă „%.250s”nu se poate citi directorul infonu se poate șterge „%.250s”nu se poate îndepărta copia de siguranță a vechiului fișier de configurare „%.250s” (a lui „%.250s”)nu se poate șterge vechiul fișier de configurare „%.250s” (= „%.250s”)nu se poate șterge lista fișierelor vechinu se poate redenumi „%s” în „%s”nu se poate satisface ante-dependența pentru %.250s (necesară datorită lui %.250s)nu se poate examina directorul „%.255s”nu se poate scana directorul cu actualizări „%.255s”stat imposibil „%.255s” (în „%.255s”)stat imposibil pentru fișierul „%s”caracterul „%c” nu este permis (doar litere, cifre și caracterele „%s”)fișierul conffile „%.250s” nu apare în pachetfișierul conffile „%.250s” nu este „stat”-abilfișierul conffile „%s” nu este fișier propriu-zisfișierul conffile „%s” conține caractere de tip spațiu la finalnumele de conffile %s este duplicateroare de configurare: %s:%d: %sacțiuni în conflict -%c (--%s) și -%c (--%s)redirectări conflictuale care implică „%.250s” sau „%.250s”conflict între pachete - nu se instalează %.250sdirectorul de control are drepturi de acces incorecte %03lo (trebuie să fie >=0755 și <=0775)directorul de control nu este un directorfișierul de control conține %cnu s-a putut accesa fișierul vechi „%.250s” așa că nu se șterge: %snu s-a putut deschide „%i” pentru fluxul de dateprobleme de dependențe - se lasă neconfiguratprobleme de dependență - nu se eliminăredirectare de către %s de la: %s
+redirectare de către %s către: %s
+redirectare a lui %s de către %sredirectare a lui %s către %s de către %sredirectare-către nu poate conține caractere newlineredirectat de %s către: %s
+terminat
+dpkg nu este înregistrat ca fiind instalat, nu se poate verifica existența
+ suportului pentru %s
+pachet declanșator așteptat duplicat „%.250s”interes în declanșator duplicat pentru numele de fișier „%.250s” și pachetul „%.250s”calea %s este duplicatădeclanșator în așteptare duplicat „%.255s”legătura sclav %s este duplicatăvaloare duplicată pentru câmpul „%s”valoare duplicată pentru câmpul definit de utilizator „%.*s”șir gol de la fgets la citirea fișierelor conffilenu se permit nume vide de declanșatoriepocăepoca din versiune nu este număreroareeroare la verificarea lui „%s”eroare la închiderea lui %.250seroare la închiderea fișierului de configurare „%.255s”eroare la închiderea/scrierea „%.255s”eroare la crearea dispozitivului „%.255s”eroare la crearea directorului „%.255s”eroare la crearea legăturii hard „%.255s”eroare la crearea pipei „%.255s”eroare la crearea legăturii simbolice „%.255s”eroare la asigurarea că „%.250s” nu existăeroare la executarea cârligului „%s”, cod de ieșire %deroare la formatarea șirului într-o variabilă „varbuf”eroare la deschiderea fișierului conffileseroare la deschiderea directorului de configurare „%s”eroare la citire %.250seroare la citirea lui %s din fișierul %.255seroare la citirea fișierului conffileseroare la citirea din pipa dpkg-deberoare la citirea fișierului cu declanșatori amânați „%.250s”eroare la setarea apartenenței pentru „%.255s”eroare la setarea apartenenței legăturii simbolice „%.255s”eroare la setarea permisiunilor pentru „%.255s”eroare la setarea marcajului de timp pentru „%.255s”eroare la încercarea de a deschide %.250seroare la eliberarea semnalului %s: %s
+eroare la scrierea „%s”eroare la scrierea în „%s”eroare la scrierea către stderr, descoperită înainte de promptul despre fișierul conffileeșec la alocarea memorieieșec la chdir în „%.255s”eșec la schimbarea directoruluieșec la chroot în „%.250s”eșec la închidere după citire: „%.255s”eșec la crearea directoruluieșec la crearea pipeieșec la dup pentru fd %deșec la dup pentru std%seșec la „fstat” pentru fișierul membru ar (%s)eșec la fstat pentru arhivăeșec la fstat a fișierului de redirectărieșec la fstat pentru fișierul statoverrideeșec la deschiderea fișierului de configurare „%.255s” pentru citire: %seșec la deschiderea fișierului de redirectărieșec la deschiderea pentru citire a fișierului info „%.255s”eșec la deschiderea fișierului statoverridenu se poate deschide noul fișier cu interese în declanșatori „%.250s”eșec la citirea lui „%.255s” (în „%.255s”)eșec la citirea arhivei „%.255s”eșec la ștergerea fișierului cu actualizări încorporat %.255seșec la ștergerea propriului fișier cu actualizări %.255snu se poate reface fișierul cu interese în declanșatori „%.250s”eșec la stat (dereference) pentru legătura simbolică existentă „%.250s”eșec la stat (dereference) pentru ținta legăturii simbolice nou propuse „%.250s” pentru legătura simbolică „%.250s”eșec la scrierea înregistrării %s din baza de date, aproximativ „%.50s” până la „%.250s”eșec la scrierea detaliilor lui „%.50s” în „%.250s”fgets a dat un șir gol din „%.250s”numele câmpului „%.*s” trebuie urmat de caracterul două punctefișierul „%.250s” este corupt - %.250s lipseștefișierul „%.250s” este corupt - suma de control MD5 necorespunzătoare „%.250s”fișierul „%.250s” este corupt - cifră eronată (cod %d) în %sfișierul „%.250s” este corupt - identificator magic greșit la sfârșitul primului antetfișierul „%.250s” este corupt - identificator magic greșit la sfârșitul celui de-al doilea antetfișierul „%.250s” este corupt - caracter de umplere nepermis (cod %d)fișierul „%.250s” este corupt - lipsește caracterul newline după %.250sfișierul „%.250s” este corupt - conține nuluri în secțiunea de informațiifișierul „%.250s” este corupt - al doilea membru nu este membru de datefișierul „%.250s” este corupt - dimensiunea este greșită pentru numărul părții menționatfișierul „%.250s” este corupt - prea scurtfișierul „%.250s” este corupt - număr greșit de părți pentru dimensiunile menționatefișierul „%.250s” nu este parte de arhivăfișierul „%s” nu este o parte arhivă
+numele de fișier nu poate conține caractere newlineînregistrarea declanșatorilor fișier menționează un nume nelegal de pachet „%.250s” (pentru interes fața de fișierul „%.250s”): %.250snumele de fișier „%s” nu este absolutfișierele „%.250s” și „%.250s” nu sunt părți ale aceluiași fișierfișierul cu lista fișierelor pachetului „%.250s” conține nume de fișier viddin fișierul cu lista fișierelor pachetului „%.250s” lipsește caracterul newline de la finalfork a eșuatnumărul de versiune al formatuluis-a generat un antet ar corupt pentru „%s”se ignoră %d avertisment legat de fișierul(ele) de controlse ignoră %d avertismente legate de fișierul(ele) de controlse ignoră %d de avertismente legate de fișierul(ele) de controlse ignoră coruperea, se va continua oricum!se ignoră conflictul, se va continua oricum!se ignoră problema de dependență cu %s:
+%sse ignoră problema de ante-dependență!nume ilegal de pachet la linia %d: %.250snume nelegal de pachet în declanșatorul așteptat „%.255s”: %snume de declanșator în așteptare nevalid: „%.255s”: %sinstalarea lui „%.255s”instalatinstalarea lui %.250s ar duce la coruperea lui %.250s, iar
+ deconfigurarea nu este permisă (--auto-deconfigure ar putea fi de ajutor)instalarea lui %.250s ar duce la coruperea programelor existentecaracter nevalid în numărul de reviziecaracter nevalid în numărul de versiunenivel de compresie nevalid pentru -%c: %ld”întreg nevalid pentru -%c: „%.250s”întreg nevalid pentru --%s: „%.250s”sintaxă nevalidă sau necunoscută în numele declanșatorului „%.250s” (în interesele în declanșatori ale pachetului „%.250s”)nume de pachet nevalid „%.250s” în fișierul de declanșatori amânați „%.250s”stare nevalidănume de declanșator nevalid „%.250s”: %.250slinie neterminată în timp ce se încerca citirea %slinie prea lungă sau neterminată în timp ce se încerca citirea %slegătura %s este atât primară cât și sclavăredirectare locală de la: %s
+redirectare locală a lui %sredirectare locală a lui %s către %sredirectare locală către: %s
+redirectat local către: %s
+denumiri lungi de fișierescriptul de mentenanță „%.50s” are drepturi de acces nepermise %03lo (trebuie să fie >=0555 și <=0775)scriptul de mentenanță „%.50s” nu este fișier propriu-zis sau legătură simbolicăscriptului de mentenanță „%.50s” nu este „stat”-abilmod manualfișier masterlegătura masternu poate fi fi șir golnepotrivire la redirectare-către
+  la ștergerea lui „%s”
+  a fost găsit „%s”nepotrivire la pachet
+  la ștergerea lui „%s”
+  s-a găsit „%s”multiple Conflicts și Replacesexistă multiple înlocuiri de stare pentru fișierul „%.250s”numele %s este atât primar cât și sclaveste necesară o opțiune de acțiunecaracter newline în numele câmpului „%.*s”caracterele newline sunt interzise în fișierele update-alternatives (%s)nici o informație despre pachet în „%.255s”nu este instalat nici un pachet denumit „%s”, nu se poate configuraneinstalatneinstalat dar fișierele de configurare rămânnimic după două puncte în numărul versiuniivechiul fișier conffile „%.250s” era un director gol (și a fost șters acum)vechiul fișier „%.250s” este același cu alte câteva fișiere noi! (atât „%.250s” cât și „%.250s”)versiunea veche a pachetului are nume de fișier info prea lung care începe cu „%.250s”componenta deschisă „%.255s” (în %.255s) a eșuat într-un mod neașteptatmemorie insuficientă pentru noua intrare de curățirememorie insuficientă pentru noua intrare de curățire cu multe argumenteproblemă la forțare datorită activării lui --force: pachetul %.250s este deja instalat și configuratpachetul %.250s nu este pregătit pentru configurare
+ nu se poate configura (starea curentă „%.250s”)pachetul %.250s nu este pregătit pentru procesarea declanșatorilor
+ (starea curentă este „%.250s” fără declanșatori în așteptare)pachetul %s a conținut listă ca și fișier infoarhitectura pachetului (%s) nu se potrivește cu sistemul (%s)pachetul conține un fișier info de control cu un nume prea lung (începe cu „%.50s”)info de control a pachetului conținea directorul „%.250s”rmdir pentru „%.250s” nu a semnalat că nu este directorpachetul redirectează altele către: %s
+suma MD5 a pachetuluipachetul are starea %s, dar declanșatorii sunt așteptațipachetul are starea %s, dar declanșatorii sunt în așteptarepachetul nu poate conține caractere newlinenumele pachetuluinumele pachetului conține caractere care nu sunt litere mici, cifre sau „-+.”numărul versiune a pachetuluipartea %d lipseștefișierul parte „%.250s” nu este un fișier propriu-zisdimensiunea părții este prea mare sau nu este pozitivădimensiunea părții trebuie să fie cel puțin %d KiB (pentru a încăpea antetul)verificat
+lipeșteproblemă de ante-dependență - nu se instalează %.250sprioritateprioritatea trebuie să fie un număr întregprioritatea lui %s: %seroare de citire în %.250seroare de citire în „%.250s”eroare de citire în fișierul de configurare „%.255s”eroare de citire de la intrarea standarderoare de citire de la stdin la promptul despre fișierul conffilefișier pachet reasamblatștergerea lui %.250sse șterge alternativa selectată manual - se comută %s pe modul automatredenumirea implică suprascrierea lui „%s” cu
+  un alt fișier „%s”, lucru nepermisredenumire: șterge vechea legătură duplicată „%s”operația solicitată necesită drepturi de superutilizators-au căutat, dar nu s-au găsit pachete (fișiere de tip *.deb)au fost găsite câteva intrări de informații pentru pachet, este permisă numai unafișier sclavlegătură sclavlegătura sclav este aceiași cu legătura principală %snume sclavfișierul sursă „%.250s” nu este un fișier propriu-zisfișierul statoverride conține linie goalădin fișierul statoverride lipsește caracterul newline de la finalstarese șterge / de la finalsubprocesul %s a returnat starea de eroare la ieșire %deroare de sintaxă în fișierul cu declanșatori fișier „%.255s”eroare de sintaxă în fișierul statoverrideacceptă un argument, numele declanșatoruluiținta este director - nu se poate omite verificarea fișierului de controlsunt mai multe versiuni ale părții %d - cel puțin „%.250s” și „%.250s”nu există nici un script versiunea nouă a pachetului - se renunțălinie prea lungă sau caracter newline lipsă în fișierul %.250seroare de sintaxă în fișierul cu interese în declanșatori „%.250s”; nume nelegal de pachet „%.250s”: %.250snumele de declanșator conține un caracter nevaliddeclanșatfișierul cu declanșatori ci „%.250s” conține sintaxă nelegală în numele declanșatorului „%.250s”: %.250sfișierul cu declanșatori ci conține o directivă necunoscută „%.250s”fișierul cu declanșatori ci conține o sintaxă necunoscută pentru directivedeclanșatorii erau în buclă, se renunțăse încearcă suprascrierea „%.250s”, care este și în pachetul %.250s %.250sse încearcă suprascrierea lui „%.250s”, care este versiunea redirectată a lui „%.250s”se încearcă suprascrierea lui „%.250s”, care este o versiune redirectată a lui „%.250s” (pachetul: %.100s)se încearcă suprascrierea directorului „%.250s” din pachetul %.250s %.250s cu un non-directorau fost specificate două comenzi: --%s și --%snu se poate (re)deschide fișierul de intrare „%.250s”nu se poate schimba apartenența fișierului țintă „%.250s”nu se poate verifica existența lui „%.250s”nu se poate verifica starea blocării fișierului „%s”nu se poate verifica existența arhivei „%.250s”chown imposibil pentru legătura simbolică copie de siguranță pentru „%.255s”nu se poate curăța mizeria din jurul lui „%.255s” înainte de a instala altă versiuneeșec la închiderea fișierului „%s”nu se poate închide noul fișier cu declanșatori amânați „%.250s”nu se poate închide starea actualizată a lui „%.250s”nu se poate crea „%.255s”eșec la crearea „%.255s” (în timpul procesării „%.255s”)eșec la crearea directorului temporarnu se poate crea directorul cu stări ale declanșatorilor „%.250s”nu se poate șterge fișierul cu informații de control „%.250s”nu se poate șterge directorul vechi „%.250s”: %snu se poate șterge fișierul depozit folosit „%.250s”nu se poate renunța la „%.250s”nu se poate executa %s (%s)nu se poate completa %.250s cu spațiiflush imposibil pentru %.250s după completarea cu spațiieșec la flush pentru fișierul „%s”flush imposibil pentru starea actualizată a lui „%.250s”fstat imposibil pentru fișierul sursăfsync imposibil pentru starea actualizată a lui „%.250s”nu se poate ignora semnalul %s înainte de rularea %.250snu se poate instala „%.250s” ca „%.250s”nu se poate instala (presupusul) fișier info nou „%.250s”nu se poate instala noul fișier info „%.250s” ca „%.250s”nu se poate instala noul fișier cu declanșatori amânați „%.250s”nu se poate instala noua versiune a lui „%.255s”nu se poate instala starea actualizată a lui „%.250s”nu se poate face legătură copie de siguranță lui „%.255s” înainte de instalarea noii versiuninu se poate crea legătură simbolică copie de siguranță pentru „%.255s”nu se poate îndepărta „%.255s” pentru instalarea noii versiuninu se poate deschide '%.255s'nu se poate deschide fișierul sursă „%s”nu se poate deschide noul fișier depozit „%.250s”nu se poate deschide fișierul rezultat „%.250s”nu se poate deschide fișierul sursă „%.250s”nu se poate deschide directorul temp de controlnu se poate deschide fișierul cu declanșatori ci „%.250s”nu se poate deschide fișierul cu declanșatori amânați „%.250s”nu se poate deschide/crea noul fișier cu declanșatori amânați „%.250s”nu se poate citi directorul depozit „%.250s”nu se poate citi fișierul cu declanșatori fișier „%.250s”nu se pot citi fanioanele descriptorului de fișier pentru %.250snu se poate citi legătura „%.255s”nu se poate citi fișierul parte „%.250s”nu se poate șterge copia de siguranță a lui „%.250s”nu se poate șterge versiunea nou-extrasă a lui „%.250s”nu se poate șterge versiunea nou-instalată a lui „%.250s”nu se poate șterge versiunea nou-instalată a lui „%.250s” pentru a permite reinstalarea copiei de siguranțănu se poate șterge fișierul info învechit „%.250s”nu se poate redenumi a noului fișier depozit „%.250s” în „%.250s”nu se poate redeschide fișierul volum „%.250s”nu se poate restaura versiunea de siguranță a lui „%.250s”nu se poate șterge în siguranță „%.250s”nu se poate șterge în siguranță „%.255s”nu se poate șterge în siguranță fișierul vechi „%.250s”: „%s”nu se poate căuta începutul lui %.250s după completarea cu spațiinu se poate seta memorie tampon pentru fișierul bazei de date %snu se poate activa fanionul close-on-exec pentru %.250snu se pot seta drepturi de execuție pentru „%.250s”nu se poate seta modul fișierului țintă „%.250s”setenv imposibil pentru scriptul maintainerstat imposibil pentru %s „%.250s”stat imposibil pentru %s „%.250s”: %snu se poate citi starea lui „%.250s”stat imposibil pentru directorul de controlstat imposibil pentru actualul fișier conffile instalat „%.250s”stat imposibil pentru noul fișier conffile „%.250s”stat imposibil pentru alt fișier nou „%.250s”stat imposibil pentru „%.255s” restaurat înaintea instalării altei versiunistat imposibil pentru fișierul sursă „%.250s”stat imposibil pentru fișierul cu declanșatori amânați „%.250s”sync imposibil pentru fișierul „%.255s”eșec la sync pentru fișierul „%s”nu se poate trunchia pentru starea actualizată a lui „%.250s”nu se poate scrie fișierul „%s”nu se poate scrie noul fișier cu declanșatori amânați „%.250s”nu se poate scrie status fd %dnu se poate scrie starea actualizată a lui „%.250s”ghilimelele nu sunt închise în „%s”eroare bzip2 neașteptatădate neașteptate după pachet și selecție la linia %dsfârșit de fișier neașteptat în %s din %.255ssfârșit de fișier neașteptat în timp ce se încerca citirea %ssfârșit de linie neașteptat după numele pachetului la linia %dsfârșit de linie neașteptat în numele pachetului la linia %dsfârșit de linie neașteptat în fișierul statoverrideargument necunoscut „%s”tip de compresie necunoscut „%s”!opțiune de forțare/refuzare necunoscută „%.*s”opțiune necunoscută „%s”opțiune necunoscută -%copțiune necunoscută --%sstare cerută necunoscută la lina %d: %.250sdespachetat dar neconfiguratdirectorul cu actualizări conține fișierul „%.250s” al cărui nume este prea lung (lungime=%d, max=%d)directorul cu actualizări conține fișiere cu nume de diferite lungimi (atât %d cât și %d)numele de câmp definit de utilizator „%.*s” prea scurtșirul versiunii conține spațiișirul versiune este golașteptarea după sub-procesul %s a eșuatavertismentîn timpul citirii %s: %sîn timpul ștergerii %.250s, nu s-a putut șterge directorul „%.250s”: %s - poate directorul este un punct de montare?trebuie să specificați pachetele prin numele lor, nu prin citarea numelor fișierelor în care vin acestea
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/ru.gmo dpkg-1.20.7.1/po/ru.gmo
--- dpkg-1.20.7.1-orig/po/ru.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/ru.gmo	2021-06-09 18:25:15.769504672 -0500
@@ -0,0 +1,722 @@
+������:�N?�Na�Nk;O��O�oP&�P=Q&UQ|Q-�R.�R�R.�R-S IS4jS�S5�S-�S.T0NT1T$�T4�T/U;UqSU(�U$�UV3V:SV6�V1�V1�V!)W2KW(~W�W�W�W.�WXS'X{X�X�X9�Xm�X)kY:�Y9�Y.
+Z'9Z&aZ�Z3�Z5�Z[[v[[�[U�[D\Y\j\w\�\Z�\�\]�]=�] ^5^F^�U^=1`Ro`1�`D�`L9aA�a'�a&�a(b'@b+hb4�b!�b,�b9c-Rc�c#�c�c$�cd"#dFd!dd#�d�d�d�d�d�d"e2>e1qe/�e�e.�ef-4fRbfH�fQ�fAPge�gf�gI_h7�h<�hi(1iBZi�i�i�i
�i �ij5*j1`j0�j�j�j#�j!k4kQkKnk7�k5�k-(lVl!pl�l'�l-�l-m 0m5Qm�m �m�m$�m,n.2n.an�nH�n6�n(0o>Yo$�o �o�o�opp�(p�p#�p:q-=rkr|r�r�r*�r<�r#s-8s-fs��s)t6t�Mt[Cu��ug�y
{|(}(A}-j}�}8�}<�}.*~Y~0p~3�~1�~/�;1�*"�JM�2���ˀ&p�2��EʂV�g�5��.��-�+�/?�
o�%}�/��*ӄ&��!%�]G���!��M̅�20��c���"��ʉ4�.�5M�3����GǊ8�,H�u�(����ԋ��3��)-�$W�:|�,��V� ;�\�*x�����&ȍ3�-#�+Q�,}�	����ʎ*�
�#� @�Ha���������g5�j������4��5��������u[�&іA��{:�!��,ؗ*�.0�_��~��� ��5��ݚ ��,�$B�.g�>��*՛;�,<��i�$�u,����"{�������9Þ(��X&�3�?��8�2,�1_�,��:��4��5.�4d�A��Mۡ-)�W�k�#����Ƣۢ� �1'�8Y�?��Bң6�L�&h�.��!��!�5�8�U�k�������	��9ƥ.�#/�,S�����%���%�-*�1X�����)��1�:�?V�&����=ڨ7�P�!j�.��*��#�"
+�&-�0T�����@��+��;$�3`�����A̫�&-�-T�0��;��0�( �?I�)��-��"��4�EO���,��"ݮ!�"�5A� w�8��ѯ�-��5-�,c�B��BӰ+�GB�$�� ��:б;�G�`�&o���7���D�cM���2��*�"�3>�:r�-��&۴��4�J�"f�����(��=ϵ*
�J8���"����ж�-�5�)F�%p�������ط�����)#�M�l�!��!��#ϸ�%�%6�'\�,����ʹ�*�'1�'Y���!���� պ-��#$�#H�+l�%��$��� �� �9�L�"b�:����Fڼ!�=�Z�$w�����ͽ�#��!�9�!Y�"{�:��پ5�� .�2O���%����0׿*�$3�/X���6��V��"%�(H�q�<��.��)��(�*@�+k���,��)��4
+�3?�2s�4��;��<�6T�:��7��@��0?�;p�?��$��A�=S�$��0��!��	�b$���c��	�:'�<b�=��_��H=���������)��)�$6��[�\��&<�&c�'�� ��7��t�2��-��'��4	�.>�)m�G��-��
�	$�k.�/����>��%�$D�#i�&��!����!��"�^:�@����%��+�7;�!s������������O!�8q�*���������3�G�_�7z�5����|��
+{���m��0�GE���)��!�����5,�b�y�"��4����!�C%�=i�%��
�� ��(��%�%B�7h���I��G�PJ�G��.��?�#R�7v�#��+��2��Y1�f��L��M?�&��K��3�=4�r���=����4�F6�1}�;��&���1�P�%j�.��.��a��eP� ����D��)�H�_�&r�-��7�����
�.+�Z�c�|�"��������)��$�&A�"h�"��"����6��!�@�7R�B��H��&�0=�n�6����$��4��(�OD�
+��
+����
+��%����%�*:�e�
l�z�+��7��+��!�$A�4f�F��@��6#�1Z���,��R��'&�$N�	s�Z}�4��2
�'@�h�.��D��G��Y@�Q��^��%K�+q�2��%��%��1�+N�Nz���!��3�*9�d�5~���"��$��2�+J�+v�,������"�$'�L�!f�*����*��0��0+�&\�3��4��5��)"�,L�y�D��*��4��0�H�f�&�#��#��%��(�.=�9l�'��*��.��(�!E�g�(}�(��4��4�[9�,��4��#��,�"H�"k�/��/��+��+�-F�*t�&��!�����"� :�2[�0��&��B��#)�.M�|����� ��1��#�7�!Q�3s���*�����6#�&Z� ��.����4��1�+P�|���"������"�3�G�Z�!n�(������:��"/#RSvM�E(^(�*�.�0
+";I^�4�(�"8Pc��B�`�9B'|#�`��)f�s�z	~
+C�e�>4�s;iI��K/T6�U�-M?K�Y�M3O�E�t_�)��W�0+=)i{�TOdX�,
O:E�2�6::Z+���r �8�]��B^�_]Y�X^pV�!&\Hk��,�"�� !"!5!U!�o!"//"�_"u$F�$�$�$�
+%��'�(i�(�E)��)��*N8+M�+P�+O&,Rv,Y�,5#-SY-p�-O.?n.G�.?�.G6/>~/F�/>0BC0F�0-�0�0)1)?1Mi1=�1e�1u[2Y�2%+3xQ3@�3]4�i4� 5��5qO6��6�e7l98d�8m9@y9��9VG:(�:'�:�:;=+;=i;^�;e<xl<'�<2
=f@=9�=+�=)
>�7>q�>SE?W�?>�?>0@>o@}�@�,AS�AHBpUBM�BMC#bC;�CW�CyDQ�Dt�D�[E��Ea}F��F8�G6�G(H)H0HAHYHiILvI&�In�K0YL!�L#�L�LO�Lh?M`�Mq	Ns{N��N�O:�OxP��Q<4R6qW��Y�M[#�\P][a]/�]f�]uT^_�^*_cG_U�_l`n`,�`�`6�`q�b]gc|�cEBd�d]�gf�g�Zh�i\�ihj[�j\�jR:kW�k�k[lF`lU�l[�l?Ym��mBnFIn��n$*o`OoF�o��qB�tH:um�um�us_va�v>5w�twzx9�x5�x^ydymy4�y�yz�yWEzA�zw�zLW{��{MD|A�|B�|}7}NR}[�}s�}Cq~A�~
+�~I2LRB�B�:X����C�VV�o�����Ą�s���Q��e���[�G��I8�"��H���?n�F�����p�����:}�e���M �On�+��B�t-�J�����u������w(�;��ܜ��gѝE9����1��f�ZP����rH�z��h6�d��f�Mk�e��u�e��q���m����L��"�(�N-�H|�ŧҧۧ8�k+�k�������Z�Ci�H�����R��Mիl#�?��0Ь&�((�$Q�$v�'��níN2�T��x֮QO�M��q�pa�wҰRJ�e��.�X2�N��Oڲ�*��³JS�?���޴kn�0ڵP�Y\�Y��j�F{�E·t�I}�-Ǹ���F��uݹeS�I��?��C�D׻Y��v�r���q�l�Ut�|ʾdG�g��b�Dw�h���%�.��:��\�Jm�2��d��1P�����/�DO�U��O���:����z�����?��@��s�|u�3��%&�lL�:�����K������f�(�qD�\��J�b^����gC�[���&�$C�*h�U��+��
�:#�^�J��i)� ��A��;��;2�an����W�~t�B��
+6�DA�:��I���+�6D�M{�<��=�9D�D~�X��5�JR�]��S��\O�/��E��H"�Mk�B��B�� ?�@`�=��A��K!�Zm�D��f
�Lt�W��A�e[�0�� ��#�>7�fv�1����?��4��;'�Hc�1��-��R�W_�V��K�EZ�G��C��_,�6��o��83�_l���?��<&�Xc�^��W�fs�-��x����XF�G����j�Vl�`��@$�Me�P��F�QK�H��U���<�^��[��y���j��s�x����w����n��J���F�g��C4�`x�@��/�cJ�T����G��q��a\�����F���O��C��:2�&m�K��[��U<�+��A��I�KJ�L��b��pF���Z��LGfb�QXc��_p����@�!�v�EpF�B�D@F�:�:XB��dN+�;�\{xT�0I	*z	0�	.�	)
+&/
+�V
+�
+w�&@Xnu�4�J3
^~
c�
*A<l
+�(�4�F�YT�T3N�2�W
+bb'��DdLJ�G��DfV~�N�W>(�[�h.���j7~��![��-S��Y�b�AR���%k��Ci��3 W� ~!&�!+�!`�!#I"sm"��"cy#��#M�$I�$;.%=j%N�%T�%\L&��&�J'V�'5(�I(,�($)$,)TQ)T�)x�)t*�*R�*��*l+V+@�+],u,+�,'�,B�,J&-Pq-L�-L.F\.0�.��.:b/�/�/�50��0PZ1n�1'2�B2�2A�2�:3J�3� 4�4#�4\�4Z5Vx5:�5@
+6mK6�61�6%�6A$7Xf7U�7D8RZ8��8�[9V�9�4:��:ID;r�;�<N�<@�<=�(=d�=s>L�>F�>[&?v�?u�?�o@��@��A21B`dBb�BW(C`�CY�Ce;Dv�D2EAKE]�Em�E-YFT�F2�FAGDQGb�Gb�GM\H^�H6	I.@IYoIO�IBJQ\J~�JZ-K�KbLekLR�L�$Mx�Mc$NK�Ns�N1HO�zORP�XP-�P8&Q2_QP�QS�QG7RpRL�RR=Sl�SF�SMDTZ�TS�TIAU)�UO�U^VzdVj�V�JWh�WjGXR�XtY@zY@�YZ�Y]WZc�ZQ[Mk[m�[d'\K�\M�\Q&]Rx]K�]^��^j_��_[4`n�`J�`HJaD�aS�ai,b3�b4�bC�bWCct�cod)�d)�dz�dnOe@�eR�e=Rfd�f\�fIRg.�g2�g>�g2=h8pho�h.i+Hi,tiL�iW�i0Fj@wjf�jTkOtk��k�|l�mc�mtndwn`�nY=o1�o��oUp[^p?�p4�p$/qTqgoq�q�qhr�xr^Xss�sc+t��tP�S���j�q������>�y��E~��c��F7r68��g��	j��o��\I$iT���:Ju!�0F���s�znM	B�#��h�V�N*�� )����������w�������N��Ur�7��z���:d�R�;6^S0�xL{������1�����
��I�x�w����������b%v�W����t�$��8�O;u�/{=0���X��5p�Cw�B\��������d8&�m��_}-���tF*���-5yrU_C.P.���#k$v�c��QM��{ ��=l;;2^����l/HgCR��	�+�����1�W��3����'j������k+_���S�){�]��<�f��T��?�(BK��A���6�y��1��`�(�L+
+N|����sI	%(T��:z�b��g�DU�/�����z�q9��'�o�R����E%�`'�C�d���"
+:����"c��V�p>��
+DaPum���@��A�]W�g�Y,��������O������,a)�E�sY�!L�7MN�x�����h��Zj�}��w>L&�"c�9JR�ZiXf�M��*��`�����Of�27�1t9,���P�e�%��\�4*�-rZ
+Gx�K�����H��)a(}�^9�Be��o�!����pQ�3v�_h�5-X8�����F�![2�^|s�WQZ��mhn?�K�k=���~�~H�[��l�q�<
k�3�?&�G�[ea�b�V`@�#��@vo���S����0��=.�Ib�G���n����Y������J~ dl��4���>$����\����5[���n.����/V�EH�i4|,f�}�TQ�G��D�&���@�t<��U����K�p Ae���iY]��qm����#A
�y����?�
D<�X|4'��"O��6�]�3+���J�u��2
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s suggests %s%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one package name argument--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMore than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenVersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open security status notification channelcannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentgenerated corrupt ar header for '%s'header is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file or streamunexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion number does not start with digitversion string has embedded spacesversion string is emptyversioned Provideswait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.22
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:52+0200
+Last-Translator: Yuri Kozlov <yuray@komyakino.ru>
+Language-Team: Russian <debian-l10n-russian@lists.debian.org>
+Language: ru
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: Lokalize 1.5
+Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);
+
+ пакетные ожидающие триггеры могут быть не определены:
+
+Файл настройки «%s» отсутствует.
+По вашему указанию устанавливается новый файл настройки.
+
+Параметры отладки объединяются побитовой операцией «или».
+Заметим, что значения и их смысловая нагрузка могут быть изменены.
+
+Для установки или удаления пакетов используйте программу «dpkg»
+или дружественный интерфейс управления пакетами «apt» или
+«aptitude». Пакеты, распакованные с помощью «dpkg-deb --extract»,
+будут установлены неправильно!
+
+ПРЕДУПРЕЖДЕНИЕ: Использование параметров, отмеченных [!], может серьёзно
+повредить систему. Параметры, отмеченные [*], задействованы по умолчанию.
+     С момента установки не изменялся.
+     Версия в пакете та же, что и при последней установке.
+     не является обычным файлом %.255s
+  Что нужно сделать? Есть следующие варианты:
+   Y или I : установить версию, предлагаемую сопровождающим пакета
+   N или O : оставить установленную на данный момент версию
+      D    : показать различия между версиями
+      Z    : запустить оболочку командной строки для проверки ситуации
+  %.250s (версия %.250s) существует и %s.
+  пакет %.250s версии %.250s будет установлен.
+  пакет %.250s %s.
+  пакет %.250s установлен, но его версия %.250s.
+  пакет %.250s не установлен.
+  %.250s будет деконфигурирован.
+ пакет %.250s будет установлен, но его версия %.250s.
+  пакет %.250s будет удалён.
+  пакет %.250s распакован, но не был настроен.
+  пакет %.250s распакован, но его версия %.250s.
+  последняя настроенная версия пакета %.250s — %.250s.
+  %.250s предоставляет %.250s и и существует и %s.
+  %.250s предоставляет %.250s и будет установлен.
+  пакет %.250s предоставляет %.250s, но он %s.
+  пакет %.250s предоставляет %.250s, но должен быть деконфигурирован.
+ пакет %.250s предоставляет %.250s, но должен быть удалён.
+  %s (%s) предоставляет %s.
+  -?, --help                          Вывести это сообщение
+  --version                           Вывести номер версии
+
+  Пакет %s ожидает обработки триггеров ожидания.
+  Пакет %s пока не настроен.
+  Пакет %s не установлен.
+  Пакет %s будет удалён.
+  Пакет %s, предоставляющий %s, ожидает обработки триггеров ожидания.
+  Пакет %s, предоставляющий %s, пока не настроен.
+  Пакет %s, предоставляющий %s, не установлен.
+  Пакет %s предоставляет %s, но должен быть удалён.
+  Версия %s в системе — %s.
+  Версия %s в системе, предоставляемая %s — %s.
+  Версия %s, которая будет настроена: %s.
+  ссылка сейчас отсутствует  ссылка сейчас указывает на %s  подчинённый %s: %s %7jd байт(а), %5d строк   %c  %-20.127s %.127s
+ %d пакетов из раздела %s:  %d пакет из следующего раздела: %d пакета из следующих разделов: %d пакетов из следующих разделов: %s (%jd байт(а))
+ %s (%s) ломает %s и %s.
+ %s (не является обычным файлом)
+ ==> Удалён с момента установки (вами или сценарием).
+ ==> Файл, созданный вами или сценарием.
+ ==> Также, файл в пакете, предоставленный сопровождающим пакета.
+ ==> По умолчанию сохраняется старый файл настройки.
+ ==> Изменён с момента установки (вами или сценарием).
+ ==> Автор пакета предоставил обновлённую версию.
+ ==> По вашему указанию используется старый файл.
+ ==> По умолчанию используется новый файл настройки.
+ ==> По вашему указанию используется новый файл.
+ Пакет %s: часть(ей)  По умолчанию устанавливается новая версия файла.
+ По умолчанию сохраняется текущая версия файла настройки.
+ и  зависит от в каталогах PATH не найдена %d ожидаемая программа или исполняемый файл
+%sв каталогах PATH не найдено %d ожидаемые программы или исполняемых файла
+%sв каталогах PATH не найдено %d ожидаемых программ или исполняемых файла
+%sна данный момент установлен %d файл и каталог.)
+на данный момент установлено %d файла и каталога.)
+на данный момент установлено %d файлов и каталогов.)
+отсутствует %d запрашиваемый управляющий компонентотсутствует %d запрашиваемых управляющих компонентаотсутствует %d запрашиваемых управляющих компонентов%s (подпроцесс): %s
+%s — приоритет %d%s ломает %s%s конфликтует с %s%s повреждён: %sпараметр отладки %s, --debug=<восьм. знач.> или -D<восьм. знач.>:
+
+ Число   В исходном коде   Описание
+%s зависит от %s%s расширяет возможности %sПараметры игнорирования %s позволяют управлять поведением при
+обнаружении ошибок:
+  предупредить и продолжить работу: --force-<ошибка>,<ошибка>,…
+  прекратить работу и выдать ошибку: --refuse-<ошибка>,<ошибка>,…
+   | --no-force-<ошибка>,…
+ Возможные ошибки:
+%s не установлен корректно, все зависимости от него игнорируются%s требует предварительной установки %s%s рекомендует %s%s предлагает %s%s:
+    Версия формата части:           %d.%d
+    Часть пакета:                   %s
+        … версия:                 %s
+        … архитектура:            %s
+        … сумма MD5:              %s
+        … длина:                  %jd байт
+        … разбивать каждые:       %jd байт
+    Номер части:                    %d/%d
+    Размер части:                   %jd байт
+    Смещение части:                 %jd байт
+    Размер файла части
+      (использовано)                %jd байт
+
+%s: conffile-файл «%.250s» не является обычным файлом или символьной ссылкой (= «%s»)%s: запись о conffile-файле «%.250s» разрешается в вырожденное имя файла
+ («%s» является символьной ссылкой на «%s»)%s: файл настройки «%s» является циклической ссылкой
+ (= «%s»)%s: проблемы зависимостей, но по вашему указанию всё равно производим настройку:
+%s%s: имеются проблемы зависимостей, но по вашему указанию
+обработка триггеров всё равно будет выполнена:
+%s%s: имеются проблемы с зависимостями, но по вашему указанию
+он всё равно будет удалён:
+%s%s: ошибка подключения к входному потоку bzip2%s: ошибка подключения к входному потоку gzip%s: ошибка подключения к выходному потоку bzip2%s: ошибка подключения к выходному потоку gzip%s: не удалось создать ссылку «%.250s» на «%.250s»: %s%s: не удалось удалить «%.250s» (перед перезаписью): %s%s: не удалось удалить «%.250s»: %s%s: не удалось удалить резервную копию «%.250s»: %s%s: не удалось удалить старую распространяемую версию «%.250s»: %s%s: не удалось переименовать «%.250s» в «%.250s»: %s%s: внутренняя ошибка bzip2 при чтении%s: внутренняя ошибка bzip2 при чтении: «%s»%s: внутренняя ошибка bzip2 при записи%s: внутренняя ошибка bzip2 при записи: «%s»%s: внутренняя ошибка gzip при чтении%s: внутренняя ошибка gzip при чтении: «%s»%s: внутренняя ошибка gzip при записи%s: внутренняя ошибка gzip при записи: %s%s: внутренняя ошибка gzip при записи: «%s»%s: ошибка lzma при открытии%s: ошибка lzma: %s%s: ошибка lzma при чтении%s: ошибка lzma при записи%s: ошибка сквозного (pass-through) копирования: %s%s: не удалось открыть %s для хэша: %s%s: не удалось выполнить readlink для conffile-файла «%s»
+ (= «%s»): %s%s: не удалось получить информацию о файле настройки «%s»
+ (= «%s»): %s«%.255s» не содержит управляющего компонента «%.255s»«%s» расходится с «%s»«%s» содержит определённое пользователем значение приоритета «%s»параметр «%s» не принимает значениеВ поле «%s» указано недопустимое имя пакета «%.255s»: %sВ поле «%s» отсутствует имя архитектуры или указано что-то, что не может являться именем архитектурыВ поле «%s» отсутствует имя пакета или указано что-то, что не может являться именем пакетаПоле «%s», ссылка на «%.255s»:
+ форма записи %c устарела, используйте «%c=» или «%c%c»Поле «%s», ссылка на «%.255s»:
+ несуществующее отношение версий %c%cПоле «%s», ссылка на «%.255s»:
+ неявная ссылка на номер версии, в таких случаях используйте «=»Поле «%s», ссылка на «%.255s»
+ значение версии начинается не с латинской буквы или цифры, рекомендуется добавить пробелПоле «%s», ссылка на «%.255s»: неверное имя архитектуры «%.255s»: %sПоле «%s», ссылка на «%.255s»: название версии не завершеноПоле «%s»: синтаксическая ошибка после ссылки на пакет «%.255s»параметр «%s» должен иметь значение«%s» отсутствует в каталогах, перечисленных в PATH, или не является исполняемым(Пакет %s полностью заменён и фактически исчез.)
+(Чтение базы данных … (описание недоступно)(всего %jd байт(а))
+, создан файл coreпараметр -%c не принимает значениепараметр -%c должен иметь значение--%s --pending не принимает аргументов, помимо параметров--%s --recursive требует задания хотя бы одного имени каталога--%s требует указания в качестве аргумента имя файла .deb или каталогдля --%s требуется <имя>для --%s требуется <имя> <путь>--%s требует указания в качестве аргумента имени файла .deb--%s требуется аргумент <каталог>--%s нужен аргумент <файл>--%s нужен один аргумент--%s требует указания каталога назначения.
+Вероятно, вам следует использовать dpkg --install--%s требует корректное имя пакета, «%.250s» таковым не является: %s--%s требует задания хотя бы одного имени файла--%s требует указания хотя бы одного имени пакетадля --%s требуется четыре параметрапараметр --%s не принимает значениепараметр --%s должен иметь значение--%s принимает в качестве аргумента положительное восьмеричное числодля --%s требуется указать один или более файлов частей в качестве аргументов--%s может быть только один аргумент (файл Packages)--%s может иметь не более двух аргументов--%s принимает не более двух аргументов (имя файла .deb и каталог)параметр --%s принимает ровно один аргументпараметр --%s принимает ровно два аргументау --%s нет аргументовдля --%s требуется одно имя пакета--%s принимает только один аргумент (имя файла .deb)параметр --auto принимает в точности один аргумента (имя части файла)параметр --auto требует наличия параметра --outputв качестве аргумента --compare-versions указано недопустимое отношениепараметр --compare-versions требует наличия трёх аргументов: <версия> <отношение> <версия>--search требует задания в качестве аргумента хотя бы одного шаблона имён файловдействие --split требует указания имени исходного файладействие --split не принимает аргументов, помимо имени исходного файла и префикса места назначенияуказан --update, но %s не существует--update бесполезен вместе с --remove… похоже всё обошлось…/%s, однако:
+<compress> из tar -cf<deb> — имя файла архива в формате Debian
+<файл> — имя файла, содержащего административный компонент
+<поле> — название поля в основном управляющем файле
+
+<decompress><ссылка> и <путь> не могут быть одинаковыми<ссылка> — символьная ссылка, указывающая на %s/<имя>
+  (например, /usr/bin/pager).
+<имя> — главное имя в этой группе ссылок
+  (например, pager).
+<путь> — расположение одного альтернативного файла назначения
+  (например, /usr/bin/less).
+<приоритет> — целое; чем больше значение, тем больше приоритет в
+  автоматическом режиме.
+
+<состояние пакета и дескриптор файла-индикатора выполнения><стандартный поток ошибок><стандартный ввод><стандартный вывод>Добавляется «%s»
+Разрешить установку конфликтующих пакетовАльтернатива %s не изменена, так как вариант %s недоступен.Всегда устанавливать отсутствующие файлы настройкиВсегда использовать новые файлы настроек ничего не предлагаяВсегда использовать старые файлы настроек ничего не предлагаяДругой процесс заблокировал базу на запись, и, возможно, изменяет
+её, из-за этого могут возникнуть проблемы.
+АрхитектураПроверка подлинности файла %s …
+Команды:
+  --add <владелец> <группа> <режим> <путь>
+                           добавить новую запись <path> в базу данных
+  --remove <путь>          удалить <путь> из базы данных
+  --list [<glob-шаблон>]   список имеющихся замещений в базе данных
+
+Команды:
+  --check-supported                Проверить, поддерживает ли триггеры
+                                   имеющийся dpkg.
+
+Команды:
+  --install <ссылка> <имя> <путь> <приоритет>
+    [--slave <ссылка> <имя> <путь>] …
+                          добавить группу альтернатив в систему
+  --remove <имя> <путь>   удалить <путь> из группы альтернатив с <именем>
+  --remove-all <имя>      удалить группу альтернатив с именем <имя> из системы
+  --auto <имя>            переключить главную ссылку <имя> в автоматический
+                          режим
+  --display <имя>         показать информацию о группе <имя>
+  --query <имя>           разбираемая машиной версия --display <имя>.
+  --list <имя>            показать все назначения группы <имя>
+  --config <имя>          показать альтернативы для группы <имя> и попросить
+                          пользователя выбрать одно из значений
+  --set <имя> <путь>      настроить <путь> как альтернативу <имени>
+  --all                   вызвать --config для всех альтернатив
+
+Команды:
+  -s|--split <файл> [<префикс>]       разбить архив на части
+  -j|--join <часть> <часть> …       объединить части
+  -I|--info <часть> …               вывести информацию о части
+  -a|--auto -o <целое> <часть>        автоматически собрать части
+  -l|--listq                          показать несовпавшие части
+  -d|--discard [<файл> …]           отбросить несовпавшие части
+
+Команды:
+  [--add] <файл>           добавить отклонение.
+  --remove <файл>          удалить отклонение.
+  --list [<glob-шаблон>]   показать отклонённые файлы.
+  --listpackage <файл>     показать какие пакеты отклоняют файл.
+  --truename <файл>        вернуть отклонённый файл.
+
+Операторы сравнения, возможные в --compare-versions:
+  lt le eq ne ge gt       (пустое значение версии считать самой ранней);
+  lt-nl le-nl ge-nl gt-nl (пустое значение версии считать самой поздней);
+  < << <= = >= >> >       (для совместимости с синтаксисом файла control).
+
+Файл настройки «%s»
+Файл настройки «%s» (в действительности «%s»)
+Настроить любой пакет, который может помочь этомуДеконфигурируется %s (%s) …
+Деконфигурируется %s (%s), чтобы можно было удалить %s (%s) …
+Система управления пакетами Debian %s, версия инструмента опроса %s.
+Утилита работы с триггерами пакетов Debian %s, версия %s.
+Debian %s, версия %s.
+Программа работы с архивами пакетов Debian «%s», версия %s.
+Система управления пакетами Debian «%s», версия %s.
+Программа разбиения/объединения пакетов Debian «%s», версия %s.
+%s удалён.
+Зависимости и конфликтыОписаниеЖелаемый=неизвестно[u]/установить[i]/удалить[r]/вычистить[p]/зафиксировать[h]
+| Состояние=не[n]/установлен[i]/настроен[c]/распакован[U]/частично настроен[F]/
+            частично установлен[H]/trig-aWait/Trig-pend
+|/ Ошибка?=(нет)/требуется переустановка[R] (верхний регистр
+в полях состояния и ошибки указывает на ненормальную ситуацию)
+Не выполнять безопасные операции ввода-вывода при распаковкеПри обработке следующих пакетов произошли ошибки:
+Коды завершения:
+  0 = ok
+  1 = с --auto, файл не является частью
+  2 = проблема
+Файл «%.250s» не является частью архива.
+Синтаксис описания формата:
+  Формат описывается строкой, которая будет выведена один раз для каждого
+  пакета. Формат может включать стандартные последовательности \n (конец
+  строки), \r (возврат каретки) или \\ (обратная косая черта). Информация
+  о пакете включается путём вставки в строку ссылок на поля пакета вида
+  ${поле[;ширина]}. Поля выравниваются по правому краю, если ширина
+  неотрицательна и по левому в противном случае.
+Общая полезная информация о происходящих событияхИгнорируется запрос на удаление общего отклонения «%s».
+Игнорируется запрос на переименование файла «%s», принадлежащего отклоняющему пакету «%s»
+Обновлена информация о %d пакете.
+Обновлена информация о %d пакетах.
+Обновлена информация о %d пакетах.
+Безумно большое количество бессмысленного текстаУстановить пакет, даже если он не пройдёт аутентификациюУстанавливать, даже если это сломает другой пакетУстанавливается новая версия файла настройки %s …
+Вызов и состояние сценариев сопровождающегоВ рабочем каталоге остались посторонние файлы:
+Оставляется «%s»
+Подробная информация о зависимостях и конфликтахВсякая чушь о, например, каталоге dpkg/infoПодробная информация о каждом файле настройкиПодробная информация о каждом обработанном файлеПодробная информация по триггерамНа текущем проходе распаковано несколько копий пакета %s!
+ Настраивается только одна из них.
+ИмяНет отклонения «%s», ничего не удалено.
+Замечание: В PATH суперпользователя обычно должны присутствовать /usr/local/sbin, /usr/sbin и /sbinНастраивать нечего.Предлагать замену файлов настройки на старые версииПараметры:
+  --admindir=<каталог>             использовать <каталог> вместо %s
+  --by-package=<пакет>             заменить триггер awaiter (обычно
+                                   устанавливается dpkg)
+  --await                          пакет требует подождать обработку
+  --no-await                       не ждать обработки пакета
+  --no-act                         только протестировать, ничего не изменять
+
+Параметры:
+  --depotdir <каталог>                использовать <каталог> вместо %s/%s
+  -S|--partsize <размер>              в КиБ, используется командой -s
+                                      (по умолчанию 450)
+  -o|--output <файл>                  используется командой -j,
+                                      (по умолч. <пакет>_<версия>_<арх>.deb)
+  -Q|--npquiet                        не предупреждать, если в -a указан
+                                      файл, не являющийся частью
+  --msdos                             генерировать имена файлов вида 8.3
+
+Информация о каждом файле настройкиИнформация о каждом обработанном файлеПерезаписывать отклонённый файл его неотклонённой версиейПерезаписывать файл из одного пакета файлом другого пакетаПерезаписывать каталог из одного пакета файлом другого пакетаВ PATH отсутствуют важные программы, возможны проблемыне задана переменная окружения PATHПакет %s зафиксирован и не будет обработан. Если вас это не устраивает, используйте --force-hold.
+Пакет %s перечислен несколько раз, обрабатывается только единожды.
+Пакет «%s» не содержит файлов (!)
+Ещё не пересобранные пакеты:
+Часть %d пакета %s сохранена в файл (осталось создать ПутьПоле Pre-DependsПодготовка к распаковке %s …
+ПриоритетОбрабатывать даже пакеты с неправильной или вовсе без архитектурыОбрабатывать пакеты даже с ошибочными версиямиОбрабатываются триггеры для %s (%s) …
+Обработка остановлена из-за слишком большого количества ошибок.
+Вычищаются файлы настройки пакета %s (%s) …
+Склейка пакета %s из %d части: Склейка пакета %s из %d частей: Склейка пакета %s из %d частей: Записана информация о пакете %s из файла %s.
+Удалить пакет первой необходимостиУдалить пакеты, требующие установкиУдаляется %s (%s) …
+Удаляется «%s»
+Заменить пакет на пакеты с меньшей версиейЗаменено файлами из установленного пакета %s (%s) …
+Информация о доступных пакетах заменяется содержимым файла %s.
+Замена файлов в старом пакете %s (%s) …
+Выбор ранее не выбранного пакета %s.
+ВыборУстановить все параметры игнорированияНастраивается пакет %s (%s) …
+Куча второстепенной информации по триггерамПропускается некорректная строка: %sПропуск неизвестной альтернативы %s.Пропуск не выбранного пакета %s.
+Разделение пакета %s на %d часть: Разделение пакета %s на %d части: Разделение пакета %s на %d частей: СостояниеДля следующих пакетов ожидается обработка триггеров, которые были активированы
+другими пакетами. Эта обработка может быть запрошена из
+dselect или с помощью dpkg --configure --pending (или dpkg --triggers-only):
+При установке следующих пакетов возникли серьёзные проблемы, и они
+совершенно неработоспособны. Чтобы эти (и другие, зависящие от них)
+пакеты корректно функционировали, их необходимо переустановить:
+У следующих пакетов отсутствуют управляющие файлы в базе данных,
+их нужно переустановить:
+У следующих пакетов отсутствуют управляющие файлы md5sums в базе данных,
+их нужно переустановить:
+Следующие пакеты настроены лишь частично. Вероятно, это связано с
+с проблемами, возникшими при первой попытке настройки. Следует
+провести настройку ещё раз с помощью команды dpkg --configure <package>
+или пункта "Настроить" меню программы dselect:
+Следующие пакеты установлены лишь частично. Это связано с проблемами,
+возникшими при установке. Вероятно, установку можно завершить, повторив
+её. Удалить пакеты можно с помощью программы dselect или команды
+dpkg --remove:
+У следующих пакетов не указана архитектура:
+У следующих пакетов указана некорректная архитектура:
+Следующие пакеты принадлежат неизвестной неродной архитектуре, из-за чего
+будут возникать проблемы зависимостей в оболочках управления. Это можно
+исправить зарегистрировав неродную архитектуру выполнив
+dpkg --add-architecture:
+Для следующих пакетов были установлены триггеры, но обработка триггеров
+ещё не выполнена. Эта обработка может быть запрошена из
+dselect или с помощью dpkg --configure --pending (или dpkg --triggers-only):
+Следующие пакеты распакованы, но пока ещё не настроены.
+Чтобы они заработали, их необходимо настроить с помощью команды
+dpkg --configure или выбрав пункт "Настроить" в меню программы dselect:
+Есть %d вариант для альтернативы %s (предоставляет %s).Есть %d варианта для альтернативы %s (предоставляет %s).Есть %d вариантов для альтернативы %s (предоставляет %s).Нет программы, которая предоставляет %s.Есть только одна альтернатива в группе ссылок %s (предоставляющая %s): %sЭто свободное программное обеспечение. См. условия распространения в
+Универсальной общественной лицензии GNU версии 2 или более поздней.
+НИКАКИЕ гарантии не предоставляются.
+Срабатывание триггеров и их обработкаПопытаться выполнить установку/удаление даже не имея прав суперпользователяПреобразовать все проблемы с зависимостями в предупрежденияПреобразовать все проблемы с зависимостями из-за версий в предупрежденияКогда закончите, наберите «exit».
+Справка по установке и удалению пакетов доступна по команде dpkg --help [*];
+Программа «apt» или «aptitude» предоставляет дружественный интерфейс
+управления пакетами;
+Чтобы получить список значений флагов отладки dpkg, введите dpkg -Dhelp;
+Чтобы получить информацию об игнорировании проблем, введите dpkg --force-help;
+Чтобы получить справку по работе с файлами *.deb, введите dpkg-deb --help;
+
+Команды, отмеченные [*], выводят большое количество информации.
+Объедините их в конвейер с программами «less» или «more»!Чтобы получить информацию о работе с файлами .deb, введите dpkg-deb --help.
+Чтобы получить информацию об установке и удалении пакетов, введите dpkg --help.Чтобы получить справку, введите dpkg-split --help.Чтобы получить справку, введите dpkg-trigger --help.Распаковывается %s (%s) …
+Распаковывается %s (%s) на замену (%s) …
+Информация о доступных пакетах сливается с содержимым файла %s.
+Использование: %s [<параметр> …] <команда>
+
+Для получения информации по использованию программы используйте «%s --help».Программы «apt» или «aptitude» предоставляют дружественный интерфейс
+управления пакетами.
+Используйте параметр --help для вывода справки по отклонённым (diverting) файлам.Используйте параметр --help для вывода справки о состоянии заменяющих файлов.Используйте параметр --help для вывода справки по запросам пакетов.Использовать для новых файлов настройки вариант
+по умолчанию, если он есть, ничего не спрашивая.
+Если он не найден, то выдаётся запрос, если только
+не заданы параметры confold иВерсияВерсия dpkg с работающей поддержкой %s ещё не настроена.
+ Пожалуйста, выполните команду «dpkg --configure dpkg», а затем повторите
+попытку.
+При добавлении, значения по умолчанию --local и --divert <original>.distrib.
+При удалении, если заданы --package или --local, то они должны
+ совпадать с --divert. В сценариях пакетов preinst/postrm всегда нужно
+указывать --package и --divert.
+Пакет %s (%s) будет удалён или вычищен …
+[по умолчанию N][по умолчанию Y][значения по умолчанию нет]чтобы dpkg работал правильно, admindir должен быть внутри instdirтакже настраивается пакет «%s» (необходим для «%s»)альтернатива %s (часть группы ссылок %s) не существует; удаляется из списка альтернативальтернатива %s не может быть главной: это подчинённая ссылка %sальтернатива %s не может быть подчинена %s: это главная альтернативаальтернатива %s не может быть подчинена %s: она подчинена %sальтернатива %s для %s не зарегистрирована; не удаляетсяальтернатива %s для %s не зарегистрирована; не выбираетсяальтернативная ссылка %s уже управляется %sальтернативная ссылка %s уже управляется %s (подчинена %s)альтернативная ссылка не является абсолютной как должно быть: %sальтернативное имя (%s) не должно содержать пробелы и «/»альтернативный путь не является абсолютным как должно быть: %sнеоднозначное имя пакета «%s» с более чем одним установленным экземпляромзамещение для «%s» уже существует, но указан параметр --force, поэтому ошибка игнорируетсязамещение для «%s» уже существует, остановлюбое отклонение %sлюбое отклонение %s в %sслишком большая длина имени элемента ar «%s»элемент ar «%jd» слишком большого размера<пусто><нет><неизвестен>архитектура «%s» некорректна: %sархитектура «%s» зарезервирована и не может быть добавленаархив «%.250s» содержит два управляющих элемента, прекращаемв архиве «%s» содержится преждевременный элемент «%.*s», до «%s», прекращаемв архиве «%s» используется неизвестное метод сжатия для «%.*s», прекращаемархив содержит объект «%.255s» неизвестного типа 0x%xразмер управляющего элемента архиваархив с некорректным форматом версии: %sзапись о длине управляющей информации архива «%s» имеет недопустимый форматв заголовке архива нет символов конца строкиэлемент информационного заголовка архиваархив имеет формат версии %d.%d; используйте более новый dpkg-debотличительный номер версии архивазаголовок элемента архиваномера частей архивасмещение части архиваномер частей архиваобщий размер архиваавтоматический режимавтоматические обновления %s/%s выключены; оставляем как естьожидает обработки триггера другим пакетомв значении поля «%.*s» обнаружена пустая строканеработоспособен в результате неудачного удаления или установкинеработоспособен в результате ошибки в postinstне удалось установить неизвестный выбор %sне удалось отобразить файл информации о пакете «%.255s» в памятьне удалось удалить старый скрипт, выполняемый после удаленияне удалось получить информацию о файле информации о пакете «%.255s»не удалось добавить элемент-файл ar (%s) в «%s»: %sневозможно добавить часть разбитого пакета «%s» в «%s»: %sне удалось добавить в «%s»невозможно закрыть канал разжимающего процессане удалось вычислить хэш MD5 для файла «%s»: %sне удалось вычислить хэш MD5 файла tar «%.255s»: %sневозможно преобразовать мультибайтовую последовательность «%s» в широкий символневозможно преобразовать мультибайтовую строку «%s» в строку широких символовне удалось скопировать «%s» в архив «%s»: %sне удалось скопировать «%s» в «%s»: %sневозможно скопировать элемент архива из «%s» в канал разжимающего процесса: %sне удалось скопировать извлечённые данные «%.255s» в «%.255s»: %sнельзя отклонять каталогиневозможно отклонить файл «%s» в самого себяне удалось извлечь управляющий файл «%s» из «%s»: %sневозможно извлечь часть разбитого пакета «%s»: %sневозможно получить описатель маркировщика безопасностине удалось открыть файл «%.255s» (в «%.255s»)не удалось открыть часть архива «%.250s»невозможно открыть канал уведомлений о состоянии безопасностиошибка чтения информационного каталогане удалось удалить «%.250s»невозможно удалить архитектуру «%s», которая в данный момент используется в базе данныхнельзя удалить родную архитектуру «%s»не удалось удалить «%.250s», резервную копию файла настройки «%.250s»не удалось удалить старый файл настройки «%.250s» (= «%.250s»)не удалось удалить старый список файловне удалось переименовать «%s» в «%s»установить пакет %.250s невозможно, однако это необходимо сделать до установки %.250sне удалось просмотреть каталог «%.255s»не удалось просмотреть каталог обновлений «%.255s»непонятно как удовлетворить зависимости от предварительной установки:
+ %sневозможно назначить контекст безопасности объекту файла «%s»не удалось назначить контекст безопасности выполнения сценария сопровождающегоневозможно пропустить управляющий элемент архива из «%s»: %sневозможно пропустить элемент архива из «%s»: %sне удалось пропустить файл «%.255s» (заменён или исключён?) из канала: %sне удалось пропустить заполнение (padding) в файле «%.255s»: %sневозможно пропустить заголовок разбитого пакета «%s»: %sне удалось получить информацию о файле «%.255s» (в «%.255s»)не удалось выполнить stat для файла «%s»невозможно удалить возможные завершающие нули из dpkg-deb: %sсимвол «%c» недопустим (допустимы латинские буквы, цифры и символы «%s»)сжатые данные поврежденыв пакете отсутствует conffile «%.250s»невозможно получить информацию о conffile-файле «%.250s»conffile-файл «%s» не является обычным файломВизуализатор различий conffileимя conffile-файла «%s» содержит в конце пробельные символыповторяющееся имя conffile «%s»имя conffile-файла «%s» слишком длинное или в конце нет символа новой строкиОболочка conffileошибка в настройках: %s:%d: %sнесовместимые действия -%c (--%s) и -%c (--%s)конфликт файлов diversions из пакетов «%.250s» и «%.250s»конфликт пакетов — %.250s не будет установленрассматривается перевод %s в ненастроенное состояние, который был бы сломан %s …рассматривается перевод пакета первой
+ необходимости %s в ненастроенное состояние для активации %sрассматривается удаление %s, вместо которого будет использован %s …каталог control имеет недопустимые права доступа %03lo (должно быть >=0755 и <=0775)каталог control не является каталогомуправляющий файл «%s» не существуетв управляющем файле «%s» пакета «%s» содержится пустое имя файлав конце управляющего файла «%s» пакетом «%s» нет символа новой строкиуправляющий файл содержит %cуправляющий элементповреждение информационного файла формата базы данных «%s»не удалось открыть журнал «%s»: %sне удалось получить информацию о старом файл «%.250s», поэтому не удаляем его: %sне удалось открыть поток дескриптора «%i»текущая альтернатива %s неизвестна, в группе ссылок %s выполняется переключение на %sпри обработке триггеров обнаружено зацикливание:
+ цепочка пакетов с такими триггерами может не отвечать:элемент данныхпроблемы зависимостей — оставляем триггеры не обработаннымипроблемы зависимостей — оставляем не настроеннымпроблемы с зависимостями — не удаляетсязависимости пакетов не позволяют настроить пакет %s:
+%sпроблемы зависимостей не позволяют выполнить обработку триггеров %s:
+%sпроблемы с зависимостями не позволяют удалить пакет %s:
+%sотбрасывается устаревшая подчинённая ссылка %s (%s)отклонено %s из %s
+отклонено %s в %s
+отклонение %s из-за %sотклонение %s в %s из-за %sdivert-to не может содержать символов новой строкиотклонено пакетом %s в %s
+готово
+снижение версии %.250s с %.250s до %.250sdpkg не обозначен как установленный, невозможно проверить поддержку %s!
+повтор ожидающего триггера пакета «%.250s»повтор файла триггера interest для файла «%.250s» и пакета «%.250s»повторение пути %sповтор триггера рассмотрения «%.255s»повторение подчинённой ссылки %sповторение подчинённого имени %sзначение поля «%s» должно встречаться только один раззначение пользовательского поля «%.*s» должно встречаться только один разпустое имя поляпри чтении списка файлов настройки функция fgets вернула пустую строкупустые имена триггеров не разрешеныэпохазначение эпохи в версии отрицательноэпоха версии не является числомзначение эпохи в версии слишком большоеошибкаошибка при проверке «%s»ошибка при закрытии файла %.250sошибка при закрытии файла настройки «%.255s»ошибка при закрытии/записи «%.255s»ошибка создания устройства «%.255s»ошибка создания каталога «%.255s»ошибка создания жёсткой ссылки «%.255s»ошибка при создании нового резервного файла «%s»ошибка создания канала «%.255s»ошибка создания символьной ссылки «%.255s»не удалось убедиться в том, что «%.250s» не существуетошибка выполнения ловушки «%s», код возврата %dошибка при форматировании строки в переменную varbufошибка в формате показа: %sошибка при установке нового файла «%s»ошибка при открытии списка conffiles-файловошибка при открытии каталога настроек «%s»ошибка при обработке архива %s (--%s):
+ %sошибка при обработке пакета %s (--%s):
+ %sошибка чтения %.250sне удалось прочитать %s из файла %.255sошибка чтения списка conffiles-файловошибка чтения данных из канала dpkg-debошибка чтения файла триггеров deferred «%.250s»ошибка при удалении старого резервного файла «%s»ошибка при установке владельца «%.255s»ошибка при установке владельца символьной ссылки «%.255s»ошибка при установке прав доступа к «%.255s»ошибка при установке времени модификации «%.255s»ошибка при попытке открыть файл %.250sне удалось восстановить старый обработчик сигнала %s: %s
+ошибка во время записи «%s»ошибка записи «%s»ошибка записи в «%s»ошибка записи в список архитектурпри выводе запроса обнаружена ошибка записи в поток stderrне удалось выделить памятьне удалось выделить память для нового элемента списка неудачно установленных пакетов: %sне удалось перейти в каталог «%.255s»не удалось перейти в каталогне удалось выполнить chroot в «%.250s»ошибка при закрытии после чтения: «%.255s»не удалось создать каталогне удалось создать каналне удалось создать копию дескриптора файла %dне удалось создать копию дескриптора потока std%sне удалось выполнить fstat на файла из архива ar (%s)не удалось получить информацию об архивене удалось выполнить fstat на файл diversionsне удалось выполнить fstat на файл statoverrideне удалось создать временный файл (%s)не удалось открыть файл настройки «%.255s» на чтение: %sне удалось открыть файл diversionsне удалось открыть для чтения файл информации о пакете «%.255s»не удалось открыть файл statoverrideне удалось открыть файл списка триггеров interest «%.250s»ошибка чтенияошибка чтения файла «%.255s» (в «%.255s»)не удалось прочитать архив «%.255s»не удалось удалить втянутый файл обновлений %.255sне удалось удалить собственный файл обновлений %.255sне удалось перейти к началу временного файла (%s)не удалось вернуться в начало файла триггера interest «%.250s»ошибка позиционированияне удалось выполнить stat для существующей символьной ссылки «%.250s»не удалось выполнить stat для предполагаемой новой символьной ссылки цели «%.250s» для символьной ссылки «%.250s»не удалось выполнить fstat для временного файла (%s)не удалось удалить временный файл (%s), %sошибка записине удалось сохранить запись в базу данных %s о «%.50s» в «%.250s»не удалось записать подробности о «%.50s» в «%.250s»не удалось записать имя файла в канал программы tar (%s)fgets прочитал пустую строку из «%.250s»имя поля «%.*s» не может начинаться с дефисапосле имени поля «%.*s» должно идти двоеточиеширина поля вне допустимого диапазонафайл %.250s имеет некорректный формат версии: %sфайл «%.250s» повреждён — отсутствует %.250sфайл «%.250s» повреждён — неверная сумма MD5 «%.250s»файл «%.250s» повреждён — неверный отличительный номер заголовка архивафайл «%.250s» повреждён — неверный номер части архивафайл «%.250s» повреждён — не цифра (код символа %d) в %sфайл «%.250s» повреждён — недопустимый идентификатор типа в конце первого заголовкафайл «%.250s» повреждён — недопустимый идентификатор типа в конце второго заголовкафайл «%.250s» повреждён — неверное количество частей архивафайл «%.250s» повреждён — недопустимые символы заполнения (код %d)файл «%.250s» повреждён — отсутствует символ конца строки после %.250sфайл «%.250s» повреждён — отсутствует косая черта между номерами частей архивафайл «%.250s» повреждён — нулевые символы в информационном разделефайл «%.250s» повреждён — второй компонент не является компонентом данныхфайл «%.250s» повреждён — неправильный размер указанной частифайл «%.250s» повреждён — слишком короткийфайл «%.250s» повреждён — неверное число частей при заданном размере частифайл «%.250s» имеет формат версии %d.%d; вам нужен новый dpkg-splitфайл «%.250s» не является частью архивафайл «%s» повреждён — в %s указано целое вне диапазонафайл «%s» не является частью архива
+формат файла не распознанфайл выглядит так, как будто его загрузили в режиме ASCIIфайл не может содержать символов новой строкизапись файла триггеров содержит неверное имя пакета «%.250s» (для interest в файле «%.250s»): %.250sимя файла «%s» указано не с полным путёмфайлы «%.250s» и «%.250s» не являются частями одного и того же файласписок файлов пакета «%.250s» содержит пустое имя файлав списке файлов пакета «%.250s» отсутствует завершающий символ новой строкисписок файлов пакета «%.250s» отсутствует; предполагаем, что на данный момент у пакета нет установленных файловпринудительная переустановка альтернативы %s, так как группа ссылок %s сломанаошибка при выполнении системного вызова forkформат версии заканчивается мусоромформат версии не содержит точкиформат номера версииформат версии имеет пустую главную частьформат версии имеет пустую вспомогательную частьсгенерирован повреждённый заголовок ar для «%s»слишком длинный заголовок, создаваемая часть слишком длинна; имя пакета
+или номер версии должны быть чрезвычайно длинны или что-то подобное;
+ничего нельзя сделатьпроигнорировано %d предупреждение об управляющем(их) файле(ах)проигнорировано %d предупреждения об управляющих файлахпроигнорировано %d предупреждений об управляющих файлахполомка игнорируется, можно продолжать!конфликт игнорируется, можно продолжать!игнорируются проблемы зависимостей с %s:
+%sигнорируется проблема предварительных зависимостей!игнорируется запрос на удаление неустановленного пакета %.250sигнорируется запрос на удаление пакета %.250s, от которого
+ сохранились только файлы настройки; чтобы удалить и файлы
+ настройки, используйте --purgeнедопустимое имя архитектуры в описателе «%s:%s»: %sневерное имя ожидаемого пакета «%.250s»: %.250sнедопустимое имя пакета в строке %d: %.250sнедопустимое имя пакета в ожидающем триггере «%.250s»: %sнедопустимое имя пакета в описателе «%s%s%s»: %sнедопустимое имя триггера рассмотрения «%.255s»: %sформат информационной базы данных (%d) поддельный или слишком новый; попробуйте обновить версию dpkgинформационный файл %s/%s не связан ни с одним пакетомустановка %.255sустановленустановка %.250s сломает %.250s, и
+ деконфигурация не разрешена (--auto-deconfigure может помочь)установка %.250s сломает имеющееся ПОвнутренняя ошибканекорректный символ «%c» в элементе архива «%.250s» с размером «%.16s»недопустимый символ «%c» в поле ширинынедопустимый символ в номере редакциинедопустимый символ в номере версиинеправильная степень сжатия для -%c: %ldнекорректные параметры компрессора: %sнекорректный формат версии deb: %sнедопустимое целое для -%c: «%.250s»некорректное целое значение аргумента --%s: «%.250s»неправильный или неизвестный синтаксис в имени триггера «%.250s» (в триггере interests для пакета «%.250s»)неверное имя пакета «%.250s» в файле триггеров deferred «%.250s»неправильное состояниеневерное имя триггера «%.250s»: %.250sпри попытке чтения %s обнаружена незакрытая строкапри попытке чтения %s найдена слишком длинная или незакрытая строкассылка %s принадлежит и мастеру и подчинённомулокальное отклонение из %s
+локальное отклонение %sлокальное отклонение %s в %sлокальное отклонение в %s
+локально отклонён в: %s
+длинные имена файлову сценария сопровождающего «%.50s» установлен недопустимые права доступа %03lo (должно быть >=0755 и <=0775)сценарий сопровождающего «%.50s» не является обычным файлом или символьной ссылкойполучить информацию о сценарии сопровождающего «%.50s» невозможноошибка malloc (%zu байт(а))ручной режиммастер файлмастер ссылкавозможны проблемы с удалением %s, поскольку он предоставляет %s …не может быть пустой строкойдостигнут предел по используемой памятинесовпадение с divert-to
+  при удалении «%s»
+  найдено «%s»несовпадение с пакетом
+  при удалении «%s»
+  найдено «%s»нет закрывающей скобкиприсутствуют экземпляры пакетов, которые как могут, так и не могут быть установлены одновременно; вероятно это произошло из-за обновления с помощью неофициальной версии dpkgmulti-archнесколько Conflicts и Replacesприсутствует несколько экземпляров пакетов, которые не могут быть установлены одновременно; вероятно это произошло из-за обновления с помощью неофициальной версии dpkgдля файла «%.250s» есть несколько statoverridesдолжен вызываться из сценария сопровождающего (или с параметром --by-package)должно начинаться с латинской буквы или цифрыдолжно начинаться с латинской буквы или цифрыимя %s принадлежит и мастеру и подчинённомуукажите требуемое действиев имени поля «%.*s» обнаружен символ конца строкисимволы новой строки запрещены в файлах update-alternatives (%s)нет альтернатив для %sнет замещенийв файле «%.255s» нет информации о пакетепакет с именем «%s» не установлен, настройка невозможнашаблону %s не соответствует ни один пакетне найден путь, подходящий под шаблон %sнет, пакет %s является пакетом первой необходимости и не будет
+ переведён в ненастроенное состояние для активации %sнет, невозможно продолжить с %s (вам поможет --auto-deconfigure):
+%sне проверяется содержимое управляющей областине установленне установлен, но остались файлы настройки%s не удаляется, так как это не символьная ссылка%s на ссылку не заменёнпосле двоеточия в номере версии ничего не следуетпустое имя пакета в --%s разделённом запятыми списке «%.250s»количество частей архиваустаревший параметр «--%s», недоступные пакеты автоматически вычищаютсястарый conffile «%.250s» является пустым каталогом (и был удалён)старый файл «%.250s» такой же как несколько новых файлов! («%.250s» и «%.250s»)старая версия пакета содержит информационный файл с очень длинным именем, начинающимся с «%.250s»В поле «%s» могут указываться только точные версиипо непонятной причине не удалось открыть компонент «%.255s» (каталог %.255s)недостаточно памяти для новой записи очисткинедостаточно памяти для новой записи очистки с большим количеством аргументовнедостаточно памяти для нового контекста ошибокпроблема игнорируется, поскольку задан параметр --force:пакет %.250s уже установлен и настроенпакет %.250s не готов к настройке
+ настройка невозможна (текущее состояние: «%.250s»)пакет %.250s не готов для обработки триггеров
+ (текущее состояние «%.250s» без триггеров рассмотрения)пакет %s %s не может быть настроен, так как %s другой версии (%s)пакет %s не может быть настроен, так как не готов %s (текущее состояние: «%s»)пакет %s содержит в качестве информационного файла списокпакет %s требует переустановки, но по вашему указанию всё равно будет удалёнпакет %s требует переустановки и не будет удалёнпакет %s зафиксирован, но по вашему указанию всё равно обрабатываетсяпакет «%s» недоступенпакет «%s» не установленпакет «%s» не установлен, информация о нём недоступнаархитектура пакетаархитектура пакета (%s) не соответствует архитектуре системы (%s)пакет содержит очень длинное имя файла управляющей информации (начинается с «%.50s»)управляющая информация пакета содержит каталог «%.250s»rmdir при попытке удалить управляющую информацию пакета «%.250s» не утверждает, что это не было каталогомизвлечение управляющей информации пакетапакет отклоняет файл другого пакета в %s
+извлечение значения поля пакетаконтрольная сумма MD5 файла пакетаизвлечение архива файловой системы пакетапакет в состоянии %s, но есть триггеры ожиданияпакет в состоянии %s, но есть триггеры рассмотренияпакет абсолютно неработоспособен; перед попыткой удаления
+ его следует переустановитьпакет абсолютно неработоспособен; перед настройкой его
+ следует переустановитьпакет не может содержать символов новой строкиимя пакетаимя пакета содержит символы, отличные от строчных латинских букв, цифр или «-+».проверка подписи пакетаномер версии пакетаотсутствует часть %dчасть архива «%.250s» не является обычным файломразмер части слишком велик или не положителенразмер части должен быть, по крайней мере, %d КиБ (размер заголовка)пройдена
+вставкапуть не может содержать символы новой строкипроблема предварительных зависимостей — пакет %.250s не будет установленприоритетзначение приоритета вне допустимого диапазонаприоритет должен быть целым числомзначение приоритета %s вне допустимого диапазона: %sприоритет %s: %sошибка чтения файла %.250sошибка чтения в «%.250s»ошибка чтения файла настройки «%.255s»ошибка чтения стандартного потока вводаошибка чтения ответа на запрос из потока stdinчтение файла с информацией о пакете «%.255s»чтение файла с информацией о пакете «%s»: %sвыполняется чтение файла statoverride «%.250s»пересобранный файл пакетаиз-за %s, содержащегося в %s, возникла проблема предварительных зависимостей:
+%sотносительно %s, содержащего %s:
+%sудаление %.250sудаляемая архитектура «%s» в данный момент используется в базе данныхудаляется альтернатива, выбранная вручную — переключение %s в автоматический режимпереименование вызовет перезапись «%s»
+  другим файлом «%s», что не разрешеноrename: удаление дублирующей старой ссылки «%s»запрошенная операция требует привилегий суперпользователякоманда rm для очисткипоиск завершён, пакеты (файлы с именами, удовлетворяющими шаблону *.deb) найти не удалось<неизвестен>настройка автоматического выбора %sобнаружено несколько экземпляров информации о пакете, хотя допускается только одинкоманда оболочки для перемещения файловпропуск создания %s, так как связанный с ней файл %s (из группы ссылок %s) не существуетподчинённый файлподчинённая ссылкасовпадение подчинённой ссылки с главной ссылкой %sподчинённое имяисходный файл «%.250s» не является обычным файломразделение пакетной пересборкифайл statoverride содержит пустую строкув файле statoverride отсутствует завершающий символ новой строкисостояниепротоколировщик состоянияудаляются конечные /подпроцесс %s возвратил код ошибки %dразмер символьной ссылки «%.250s» изменён с %jd на %zdсинтаксическая ошибка в файле триггеров «%.250s»синтаксическая ошибка в файле statoverrideпринимает только один аргумент, имя триггерав качестве места назначения задан каталог, пропустить проверку управляющего файла невозможноприсутствует несколько версий части %d — по крайней мере, «%.250s» и «%.250s»в новой версии пакета нет этого сценария, отказэтот пакет является пакетом первой необходимости и не должен быть удалёнчтобы вернуться к автоматическим обновлениям, выполните команду «%s --auto %s»слишком много ошибок — останавливаемсяслишком длинная строка или отсутствующая новая строка в «%.250s»ошибка в файле триггера interest «%.250s»; неправильное имя пакета «%.250s»: %.250sимя триггера содержит недопустимый символзаписи триггера пока не существуютс триггеромфайл триггеров ci «%.250s» содержит неверный синтаксис в имени триггера «%.250s»: %.250sфайл триггеров ci содержит неизвестную директиву «%.250s»файл триггеров ci содержит директиву с неизвестным синтаксисомкаталог с данными триггеров ещё не созданзацикливание триггеров, отмена работыпопытка использовать сценарий из нового пакета …попытка перезаписать «%.250s», который уже имеется в пакете %.250s %.250sпопытка переписать «%.250s», являющийся отклонённой версией «%.250s»попытка переписать «%.250s», являющийся отклонённой версией «%.250s» (пакет: %.100s)попытка переписать каталог «%.250s» в пакете %.250s %.250s файлом, не являющимся каталогомпопытка перезаписать общий «%.250s», который отличается от других экземпляров пакета %.250sуказаны две команды: --%s и --%sне удалось (пере)открыть исходную часть архива «%.250s»не удалось изменить владельца файла назначения «%.250s»не удалось проверить существование файла «%.250s»не удалось проверить состояние файла блокировки «%s»не удалось проверить существование архива «%.250s»не удалось сменить владельца резервной ссылки на «%.255s»при установке другой версии не удалось очистить окружение «%.255s»не удалось закрыть файл «%s»не удалось закрыть новый файл «%.250s»не удалось закрыть новый файл триггеров deferred «%.250s»не удалось закрыть обновлённый файл состояния пакета «%.250s»не удалось создать «%.255s»не удалось создать «%.255s» (при обработке «%.255s»)не удалось создать файл «%s»не удалось создать новый файл «%.250s»не удалось создать временный каталогне удалось создать каталог состояния триггеров «%.250s»не удалось удалить файл управляющей информации «%.250s»не удалось удалить старый каталог «%.250s»: %sне удалось удалить уже не нужный рабочий файл «%.250s»не удалось удалить файл «%.250s»не удалось запустить %s (%s)не удалось заполнить %.250s символами выравниванияне удалось очистить %.250s после выравниванияне удалось сбросить на диск файл «%s»не удалось сбросить на диск новый файл «%.250s»не удалось сбросить буфер обновлённого файла состояния пакета «%.250s»не удалось получить информацию об исходном файлене удалось синхронизировать обновлённый файл состояния пакета «%.250s»не удалось получить файловый дескриптор каталога «%s»не удалось проигнорировать сигнал %s перед запуском %.250sне удалось установить «%.250s» в качестве «%.250s»не удалось установить(предположительно) новый информационный файл «%.250s»не удалось переименовать новый информационный файл «%.250s» в «%.250s»не удалось установить новый файл триггеров deferred «%.250s»не удалось установить новую версию «%.255s»не удалось установить обновлённый файл состояния пакета «%.250s»не удалось заблокировать %sне удалось создать резервную ссылку на «%.255s» перед установкой новой версиине удалось создать резервную ссылку на «%.255s»не удалось переместить в другое место «%.255s», что необходимо для установки новой версиине удалось открыть «%.255s»не удалось открыть каталог «%s»не удалось открыть файл «%s»не удалось открыть новый рабочий файл «%.250s»не удалось открыть результирующий файл «%.250s»не удалось открыть исходный файл «%.250s»не удалось открыть временный каталог управляющей информациине удалось открыть файл триггеров ci «%.250s»не удалось открыть файл триггеров deferred «%.250s»не удалось открыть/создать новый файл триггеров deferred «%.250s»ошибка чтения рабочего каталога «%.250s»не удалось прочитать файл триггеров «%.250s»не удалось прочитать флаги дескриптора файла %.250sне удалось прочитать символьную ссылку «%.255s»не удалось прочитать часть архива «%.250s»не удалось удалить «%s»не удалось удалить сохранённую копию «%.250s»не удалось удалить скопированный исходный файл «%s»не удалось установить только что распакованную новую версию «%.250s»невозможно удалить только что установленную версию «%.250s»не удалось удалить новую версию «%.250s», что необходимо для отката к старой версиине удалось удалить устаревший информационный файл «%.250s»не удалось переименовать новый рабочий файл «%.250s» в «%.250s»не удалось заново открыть часть архива «%.250s»невозможно восстановить сохранённую копию старой версии «%.250s»не удалось безопасно удалить «%.250s»не удалось безопасно удалить «%.255s»не удалось безопасно удалить старый файл «%.250s»: %sне удалось перейти к началу %.250s после выравниванияне удалось установить буферизацию файла базы данных %sне удалось установить флаг close-on-exec файла %.250sне удалось сделать файл «%.250s» исполняемымне удалось установить права доступа файла назначения «%.250s»не удалось выполнить setenv для сценария сопровождающегоне удалось выполнить setenv для подпроцессане удалось получить информацию о %s в «%.250s»не удалось получить информацию о %s в «%.250s»: %sне удалось получить информацию о файле «%.250s»не удалось выполнить stat для каталога controlне удалось получить информацию об уже установленном conffile-файле «%.250s»не удалось получить информацию о новом распространяемом conffile-файле «%.250s»не удалось получить информацию о другом новом файле «%.250s»перед установкой новой версии не удалось получить информацию о восстановленном файле «%.255s»не удалось выполнить stat для файла источника «%.250s»не удалось получить информацию о файле триггеров deferred «%.250s»не удалось синхронизировать каталог «%s»не удалось синхронизировать файл «%.255s»не удалось синхронизировать файл «%s»не удалось синхронизировать новый файл «%.250s»не удалось усечь обновлённый файл состояния пакета «%.250s»не удалось разблокировать %sне удалось записать файл «%s»не удалось записать новый файл «%.250s»ошибка записи в новый файл триггеров deferred «%.250s»не удалось произвести запись в файловый дескриптор состояния %dне удалось записать обновлённый файл состояния пакета «%.250s»непарные кавычки в «%s»неожидаемая ошибка bzip2лишние символы после имени пакета и желаемого состояния в строке %dнеожиданный конец файла, не удалось прочитать %s из файла %.255sнеожиданный конец файла или потоканеожиданный конец файла при попытке чтения %sнеожиданный конец входных данныхнеожиданный конец строки после имени пакета в строке %dнеожиданный конец строки в имени пакета в строке %dнеожиданный конец строки в файле statoverrideнеизвестный аргумент «%s»неизвестный принцип сжатиянеизвестная стратегия сжатия «%s»!неизвестный тип сжатия «%s»!неизвестный формат версии deb: %sнедопустимый параметр игнорирования/обработки проблем «%.*s»неизвестный параметр «%s»неизвестный параметр -%cнеизвестный параметр --%sнеизвестный выходной формат проверки «%s»некорректное желаемое состояние в строке %d: %.250sраспакован, но не настроеннеподдерживаемая настройка сжатиянеподдерживаемый тип сжатия «%s» со стандартным сжатиемнеподдерживаемые параметры в заголовке файланеподдерживаемый тип проверки целостностикаталог обновлений содержит файл «%.250s», у которого слишком длинное имя (%d символов при допустимых %d)каталог обновлений содержит файлы с разными длинами имён (как %d, так и %d)обновляется альтернатива %s, так как группа ссылок %s изменилась подчинёнными ссылкаминазвание пользовательского поля «%.*s» слишком короткоиспользуется %s для предоставления %s (%s) в автоматическом режимеиспользуется %s для предоставления %s (%s) в ручном режимезначение поля «%s» содержит недопустимую строку «%.*s»значение в поле «%s» в этом контексте недопустимопакет %s не прошёл проверку!пакет %s не прошёл проверку, но по вашему указанию всё равно будет установлен<нет>версия %.250s пакета %.250s уже установлена, пропускаемномер версии не начинается с цифрыв строке версии есть пробелыстрока версии пустаProvides с версиейожидание завершения подпроцесса %s завершилось неудачнопредупреждениепри чтении %s: %sпри удалении %.250s каталог «%.250s» не пуст, поэтому не удалёнпри удалении пакета %.250s не удалось удалить каталог «%.250s»: %s — возможно, он является точкой монтирования файловой системы?версия %.250s не будет снижена с %.250s до %.250s, пропускаемда, %s будет переведён в ненастроенное состояние (сломан из-за %s)да, пакет %s будет удалён, чтобы можно было установить %sпакеты задаются их собственными именами, а не именами файлов, из которых они установлены
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/Rules-quot dpkg-1.20.7.1/po/Rules-quot
--- dpkg-1.20.7.1-orig/po/Rules-quot	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/Rules-quot	2021-06-09 18:22:47.474275400 -0500
@@ -0,0 +1,62 @@
+# Special Makefile rules for English message catalogs with quotation marks.
+#
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+# This file, Rules-quot, and its auxiliary files (listed under
+# DISTFILES.common.extra1) are free software; the Free Software Foundation
+# gives unlimited permission to use, copy, distribute, and modify them.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+	$(MAKE) en@quot.po-update
+en@boldquot.po-create:
+	$(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	ll=`echo $$lang | sed -e 's/@.*//'`; \
+	LC_ALL=C; export LC_ALL; \
+	cd $(srcdir); \
+	if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \
+	   | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \
+	   { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	     '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \
+	       $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \
+	       ;; \
+	     *) \
+	       $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \
+	       ;; \
+	     esac } 2>/dev/null > $$tmpdir/$$lang.new.po \
+	     ; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "creation of $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+en@quot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+	rm -f *.insert-header
diff -Naurp dpkg-1.20.7.1-orig/po/sk.gmo dpkg-1.20.7.1/po/sk.gmo
--- dpkg-1.20.7.1-orig/po/sk.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/sk.gmo	2021-06-09 18:25:15.822504753 -0500
@@ -0,0 +1,610 @@
+��l|��6(I?)IaiIk�I�7J=�J&�JK-1L._L�L.�L�L �L4M@M5\M-�M.�M0�M1 N$RN4wN/�N�Nq�N(fO$�O�O�O:�O6/P1fP1�P!�P(�PQ-QKQ.ZQ�QS�Q�Q�QR)1R9[R.�R'�R&�RS3)S5]S�S�Sv�S[TUyT�T�T�TUUZ&U�U�U��U=mV�V�V�V��V=�XR�X1MYDYA�Y'Z&.Z(UZ'~Z+�Z4�Z![,)[9V[-�[�[#�[\$\D\"a\�\!�\#�\�\�\]$]9]"Y]2|]1�]/�]^.(^W^-r^R�^H�^Q<_A�_e�_f6`I�`7�`<a\a(oaB�a�a�a
b
 b .bOb5hb1�b�b�b#�b!cAc^cK{c7�c5�c-5dcd!}d�d'�d-�d e50efe �e�e$�e,�e.f.@fofH�f6�f(g>8g$wg �g�g�g�g�g�h�h#�h:�h-jJj[jlj~j*�j<�j#�j-k-Ek�skll[,l��lg�p
�q�r-t<?t.|t�t0�t3�t1'uYufu�u��u1Bv*tvJ�v2�v�w&�x2�xEyVby�y5�y.z-7z+ez/�z
�z%�z/�z*%{&P{!w{]�{�{!�{M|l|2�|��|"M~p~4�~.�~5�~3)]Gm8�,��(:�c�h�z�3��)��:�V� s���*��ہ&�-�,?�	l�v���*��ς� �H#�l��s��D�g��j_��ʅ���4s�5���އ����q�u�&��A��{��!x�,��*ǋ.�!��@� Č5�,�$H�*m�;��,ԍ����uĎ�:���+�98�(r�X��3��?(�8h�2��1ԑ,�:3�4n�5��4ْA�MP�-��̓��#���;� R�1s�8��6ޔ�&1�.X�!��!��5˕��4�I�]�r�	��9��.ɖ#��,�I�h�%����%͗-�1!�S�i�)��1��&��=(�7f�!��.��*�"�&=�d��@��+ך;�3?�s���A���&�-3�0a�(��?��)��-%�"S�v�4��E���,"�"O�!r���5�� �
+��-8�5f�,��BɟB�+O�G{�$à �	�"�&1�X�7t���Dʡc�s�*�"��3͢-�&/�V�p�����"��ݣ��(��=#�*a�J��פ"��$�<�-[�)��%��٥ߥ���7�=�Q�)f�����!Φ!�#�6�%S�%y�'��,ǧ��
�,�*I�t�!���� Ȩ-�#�#;�+_�%��$��֩ ��,�?�"U�:x���Fͪ�0�M�$j�������ث#��,�!L�"n�:��̬5� !�2B�u�%����0ʭ*��$&�/K�{�6��V��"�(;�d�<t�.��)�(
+�+3�_�,{�)��4Ұ3�2;�4n�;��<߱6�:S�7��@Ʋ0�;8�?t�$��Aٳ=�$Y�0~�!��Ѵb�O�cm�ѵ:�<*�=g�_��H�N�Z�z���)��)Է$���#�\��&�&+�'R� z�7��tӹ2H�-{�'��4Ѻ.�)5�G_���	��kȻ/4�d�>y�%��$޼#�&'�!N�!p�"��^��@�U�%d�+��7��!��*�@�\�t���O��8�*%�P�j�v���3������7��5-�c�|y�
+���m!�0��G���)(�!R�t���5������"�4+�`�!~�C��=��%"�
H� V�(w���%��7���I3�G}�P��G�?^�#��7��#��+�2J�Y}�f��L>�M��&��K�3L�=������=��8�4M�F��1��;��&7�^�}���%��.��.� :�[�Dh�������&��-�7K�����.������"����0�)G�q�&��"��"����6�K�j�7|�B��H��&@�0g���6����$��4�R�On�
+��
+����
+��%��%�%>�*d���
����+��7��+�!I�$k�4��F��@�1M��,��R��'�$A�	f�Zp�4��2�'3�[�.w�D��G��Y3�Q��^��%>�+d�2��%��%��1�+A�Nm���!��3��*,�W�5q���"��$��2
+�+=�+i�,������"��$�?�!Y�*{���*��0��0�&O�3v�4��5��)�,?�l�D~�*��4��#�;�Y�&r�#��#��%��(�.0�9_�'��*��.���!8�Z�(p�(��4��4��[,�,��4��#��,�";�"^�/��/��+��+
�-9�*g�&��!������� -�2N�0��&��B��#�.@�o����� ��1���*�!D�3f���*������6�&M� t�.����4��1�+C�o���"����"����.�(B�k���"��#��S��MA�(��"��I��%�44�(i�"����������B�`K�9��'��#�`2����UF�|�������AG�.����-��*���3.�!b� ��0����1��. �0O�0��2��&��;�-G�u�s��1�+4�$`���H��A��@+�0l���1����
+�'�/<�	l�qv������?6�2v�:��>��9#�]�6p�@����
�����
+����I�]�n�z���`���(M
+Xo���W�u�FWQ�J�(;'d*�)�N�N0+=�K�>5$t.�"�,�#-<!j'�+���#
	!1	'S	+{	a�	S	
+9]
+!�
+G�
+>aYK�hCp{�v0
Z�
>CA#�D�B�1Kh}#�!�+�:Ia"�#�!� �OB[:�8�$2"W+z:�$�6%=#c�1�8�6
*D oF�@�7NP(�(�"�'�<
�'�W,_����,�C5H<~=���
��g�1qF� 0�!;	#:E#=�#�#9�#9$IH$�$�$�$�$;�%&&U'&T}&��&-�(J�(k)�z)*<(*-e*;�*%�*<�*2+1I+*{+3�+0�+;,_G,�,8�,_�,G-C_-��-,O/$|/1�/*�/4�/Q30 �0U�0=�0/:1j14�1�1�1�1F�10%2HV2j�2$
+3/35N3�3!�3@�3*4+4#24 V41w4 �4%�4$�4u5�5��5�|6n"7n�78		9+:3?:�s:�D;� <��<#�=J�=�>&�>5�>=?9L?$�?��?+D@Hp@A�@(�@=$APbA@�A��A�B��B�MC:DJDZD?kD8�Da�DAFEL�ED�EDFD_F%�F=�F9G<BG:GU�GPH/aH�H �H+�H+�H
+%I'0I:XI?�I:�I$J*3J@^J+�J&�J<�J /KPKjK�K�K�K�KE�KH(L*qL?�L$�L*MH,M/uMJ�M@�MK1N'}N+�N8�NA
+OCLO3�OP�OBP8XPB�PJ�P5Q?UQ,�Q'�QS�QA>R`�RU�R37S.kSO�S.�SET;_T6�T7�TY
+U=dUF�U9�U.#V<RVZ�V#�V<WCKW4�W:�WP�W*PX({X�X0�X9�X1/Y;aYM�Y/�YDZ!`Z#�Z�Z�Z3�Z,[P2[(�[O�[��[�\?�\.�\C]4E]/z]�]�]�]�]6^V^t^8�^S�^V_^e_�_B�_`!;`"]`B�`:�`/�`.a%4aZa$za�a�a�a<�a+b-Gb,ub2�b;�b(c7:c0rc9�c4�cd0-d.^d6�d�d(�d-e$6eB[e?�e9�eLf:ef6�f �f'�f g;gZg)uge�ghj%h/�h$�h0�h.iEibi'~i'�i9�i0j79j6qj.�jH�j' kAHk&�k?�k�k8l,DlCqlJ�l<mM=m5�ma�m�#n5�n-�noA/o:qoA�o7�o0&p&Wp5~p2�pM�pF5qD|qH�qV
+rTarA�rC�rG<sR�s7�sItUYt5�tR�tL8u/�uI�u,�u!,vPNv7�vw�v)OwLywE�wKx�XxV�x6y/Ky{y�y0�y0�y,z�Bz��z/y{.�{5�{+|M:|��|@}<\}/�}G�};~NM~e�~
u$7�#�N�'E�!m���/��!߀-�(/�rX�Wˁ#�22�-e�J��"ނ��1�N�i���T��J�::�#u�����
��?˄�#)�JM�D��!݅���
+�����ņ?[�D��$��$�#*�1N���@����$��,!�PN�-��1͉D��GD�'����8Ɗ3��3�/M�G}�ŋO݋U-�e��Z�KD�/��G��*�83�7l�n����M��c��*\�M��EՐ]� y�&��U���5-�Yc�4��_�)R�|���&��0�I�I^�7����P�@�Y�p�4��:��<�	.�8�7A�y�!��)��Ζޖ"��9�,X�P��7֗*�9�>X�����MʘV�To�Aę@�G�La�
+��#��Jݚ&(�^O�����2ћ�6� N�,o�:��ל
ܜ�%�C+�>o�)��.؝L�NT�;��Nߞ".�EQ�m��+�)1�	[�ue�@۠H�7e�$��/¡I�K<�b��O�l;�!��CʣD�4S�<��7ŤZ��YX�(��,ۥJ�9S���G��(��2�(Q�Az�9��1��D(�$m�����"Ѩ3��=(�<f�9��Iݩ4'�;\�9��JҪM�Ok�7��<�0�YF�E��M�#4�)X�'��7��6�5�3O�:��C��S�?V�H��B߯-"�6P���9��B߰="�B`�}��>!�S`�9��6�+%�+Q�=}�=��<��?6�<v�H��A��<>�+{�/��(׵0�M1�[�=۶V�?p�J��4��50�2f�;��9ո�(&�2O�J��3͹9�!;�]�8x�+��(ݺ7�>�<[�:��3ӻ�#� >� _�1����˼߼,��!!�C�)c�%��o��W#�E{� ��P�	3�;=�$y�*��ɿ ���Y'����^�1n�#��j��;�V�W%U���v�
�70���m��`��(�]�i]C�^�1r�e�h9*���`��X^�^�N),�	�LN�b\&4�V���K�L*�)��'��	�������|b��}s3�h6�{,o|���y�D�"�5�K~G�0�R�~8>��O��.4qwk�3��l*cN"H#q0�U�xC??ul�_����DM/]
+ID����@[;��Z(Q-�<����F!H7_�/"������[�d5�X��+�#Z���&�����U����\�z��2UDk����Hy���h@Q![���
�-
+T������8`�g*��i��&c
V<�6��>]Y�m�(9��nA��y@��S�R`�fk7���3 �A7�$�2��c�1�Z���d�eI�����=����O��&���bTsI�Frx:����EH�v�d�������W�Z1=u����%i�5_���)��Yx��K�����ofg��wAV��O��,B�;�:���P����	��J�<��GT'�p�����Fg��EB���B��� ��$L��Ba6�L���\�%I�!O��Y���Jz��(.�Jh���@4;q�EeC3�\��[P�������%��Q��}iS=�ro�.Jlb�S��T�82}��'����1NM�j���$	+s|�P����z�9��kW���0=F����W�+�����m�����X4���l>�5�t~�"u��9E�a$���^:���'�-��
+?v?�fj
+�j#�/j���,�a�_tG��<�d��K.� �n�A�G��R�S�p{#Y�P���p�6�>�Mwt�n)�M/
�RQ!���-X2�e����{ c��8��a:f�g+�C�
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s suggests %s%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one package name argument--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configure any package which may help this oneDebian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMore than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing was halted because there were too many errors.
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving '%s'
+Replace a package with a lower versionReplacing available packages info, using %s.
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenVersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchive '%.250s' contains two control members, giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentgenerated corrupt ar header for '%s'header is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepre-dependency problem - not installing %.250sprioritypriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file or streamunexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredunsupported compression presetunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion number does not start with digitversion string has embedded spacesversion string is emptywait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 10:01+0200
+Last-Translator: Ivan Masár <helix84@centrum.sk>
+Language-Team: Slovak <debian-l10n-slovak@lists.debian.org>
+Language: sk
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=3; plural=((n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2);
+X-Generator: Poedit 1.5.4
+
+ očakávané spúšťače (triggers-pending) balíkov, ktoré nemožno vyriešiť:
+
+Konfiguračný súbor „%s“ v systéme neexistuje.
+Inštaluje sa nový konfiguračný súbor podľa vašej požiadavky.
+
+Ladiace voľby he možné kombinovať pomocou logického súčtu po bitoch.
+Pamätajte, že významy a hodnoty sa môžu časin zmeniť.
+
+UPOZORNENIE - použitím volien označených [!] si môžete vážne poškodiť vašu inštaláciu.
+Vynucovanie volieb odnačených [*] je štandardne zapnuté.
+     Verzia v balíku je rovnaká ako posledná nainštalovaná.
+     nie je obyčajný súbor          %.255s
+   Čo s tým chcete urobiť?  Možné voľby sú:
+    Y or I  : nainštalovať verziu od správcu balíka
+    N or O  : ponechať momentálne nainštalovanú verziu
+      D     : zobraziť rozdiely medzi verziami
+      Z     : spustiť shell a preskúmať situáciu
+  %.250s (verzia %.250s) je prítomná a %s.
+  %.250s (verzia %.250s) sa nainštaluje.
+  %.250s je %s.
+  %.250s je nainštalovaný, ale vo verzii %.250s.
+  %.250s nie je nainštalovaný.
+  zruší sa nastavenie %.250s.
+  %.250s sa nainštaluje, ale vo verzii %.250s.
+  %.250s sa odstráni.
+  %.250s je rozbalený, ale sa ešte nenastavil.
+  %.250s je rozbalený, ale vo verzii %.250s.
+  %.250s naposledy nastavená verzia je %.250s.
+  %.250s poskytuje %.250s a je prítomný a %s.
+  %.250s poskytuje %.250s a bude sa inštalovať.
+  %.250s poskytuje %.250s, ale je %s.
+  %.250s poskytuje %.250s, ale jeho nastavenie sa zruší.
+  %.250s poskytuje %.250s, ale sa odstráni.
+  %s (%s) poskytuje %s.
+  -?, --help                       Zobrazí tohto pomocníka.
+      --version                    Zobrazí verziu.
+
+  Balík %s očakáva spracovanie spúšťačov.
+  Balík %s ešte nie je nakonfigurovaný.
+  Balík %s nie je nainštalovaný.
+  Balík %s sa odstráni.
+  Balík %s, ktorý poskytuje %s, očakáva spracovanie spúšťačov..
+  Balík %s, ktorý poskytuje %s, ešte nie je nakonfigurovaný.
+  Balík „%s“, ktorý poskytuje %s, nie je nainštalovaný.
+  Balík %s, ktorý poskytuje %s, sa odstráni.
+  Verzia %s na systéme je %s.
+  Verzia %s, ktorá sa má konfigurovať, je %s.
+  odkaz momentálne chýba  odkaz práve ukazuje na %s  vedľajší %s: %s %7jd bajtov, %5d riadkov %c  %-20.127s %.127s
+%d v %s:  %d balík, z nasledovných sekcií: %d balíky, z nasledovných sekcií: %d balíkov, z nasledovných sekcií: %s (%jd bajtov)
+ %s (%s) kazí %s a je %s.
+ %s (nie je obyčajný súbor)
+ ==> Ponechá sa starý konfiguračný súbor ako predvolený.
+ ==> Distribútor balíka dodal upravenú verziu.
+ ==> Použije sa starý súbor podľa vašej požiadavky.
+ ==> Použije sa nový konfiguračný súbor ako predvolený.
+ ==> Použije sa nový súbor podľa vašej požiadavky.
+ Balík %s: časti Predvolenou operáciou je inštalácia novej verzie.
+ Predvolenou operáciou je ponechanie vašej aktuálnej verzie.
+ a  závisí na %d očakávaný program nebol nájdený v premennej PATH alebo nie je spustiteľný
+%s%d očakávané programy neboli nájdené v premennej PATH alebo nie sú spustiteľné
+%s%d očakávaných programov nebolo nájdených v premennej PATH alebo nie sú spustiteľné
+%smomentálne je nainštalovaný %d súbor alebo adresár.
+momentálne sú nainštalované %d súbory alebo adresáre.
+momentálne je nainštalovaných %d súborov alebo adresárov.
+Chýba %d požadovaný riadiaci komponentChýbajú %d požadované riadiace komponentyChýba %d požadovaných riadiacich komponentov%s (podproces): %s
+%s - priorita %d%s kazí %s%s je v konflikte s %s%s poškodený: %sLadiaca voľba %s, --debug=<osmičkové> or -D<osmičkové>:
+
+ Číslo   Odkaz na zdroj   Popis
+%s závisí na %s%s rozširuje %sVynucovacie voľby %s - ovládanie správania v prípade problémov:
+  upozorniť, ale pokračovať:  --force-<vec>,<vec>,...
+  zastaviť s chybou:          --refuse-<vec>,<vec>,... | --no-force-<vec>,...
+ Vynucovanie vecí:
+%s nie je správne nainštalovaný - ignorujú sa všetky závislosti na ňom%s pred-závisí na %s%s odporúča %s%s navrhuje %s%s:
+    Verzia formátu časti:           %d.%d
+    Časť balíka:                    %s
+        ... verzia:                 %s
+        ... architektúra:           %s
+        ... súčet MD5:              %s
+        ... dĺžka:                  %jd bajtov
+        ... rozdel. každých:        %jd bajtov
+    Číslo časti:                    %d/%d
+    Dĺžka časti:                    %jd bajtov
+    Offset časti:                   %jd bajtov
+    Čiast.veľ.súboru (použ. časť):  %jd bajtov
+
+%s: konfiguračný súbor „%.250s“ nie je súbor ani symbolický odkaz (= „%s“)%s: názov konfiguračného súboru „%.250s“ nie je platným názvom
+ („%s“ je symbolický odkaz na „%s“)%s: konfiguračný súbor „%s“ je cyklickým odkazom
+ (= „%s“)%s: problémy so závislosťami, napriek tomu sa konfiguruje ako ste žiadali:
+%s%s: problémy so závislosťami, ale odstraňuje sa podľa požiadavky:
+%s%s: chyba pripojenia vstupu na tok bzip2%s: chyba pripojenia vstupu na tok gzip%s: chyba pripojenia výstupu na tok bzip2%s: chyba pripojenia výstupu na tok gzip%s: nepodarilo sa odstrániť vytvoriť odkaz „%.250s“ na „%.250s“: %s%s: nepodarilo sa odstrániť odstrániť „%.250s“ (pred prepísaním): %s%s: nepodarilo sa vykonať „%.250s“: %s%s: nepodarilo sa odstrániť starú zálohu „%.250s“: %s%s: nepodarilo sa odstrániť starú distribuovanú verziu „%.250s“: %s%s: nepodarilo sa premenovať „%.250s“ na „%.250s“: %s%s: vnútorná chyba čítania bzip2%s: vnútorná chyba čítania bzip2: „%s“%s: vnútorná chyba zápisu bzip2%s: vnútorná chyba zápisu bzip2: „%s“%s: vnútorná chyba čítania gzip%s: vnútorná chyba čítania gzip: „%s“%s: vnútorná chyba zápisu gzip%s: vnútorná chyba čítania gzip: %s%s: vnútorná chyba zápisu gzip: „%s“%s: chyba zatvorenia lzma%s: chyba lzma: %s%s: vnútorná chyba čítania lzma%s: vnútorná chyba zápisu lzma%s: chyba pass-through kopírovania: %s%s: nie je možné otvoriť %s pre haš: %s%s: nie je možné vykonať funkciu readlink na konfiguračnom súbore „%s“
+ (= „%s“): %s%s: nie je možné zistiť stav konfiguračného súboru „%s“
+ (= „%s“): %s„%s“ neobsahuje žiadnu riadiacu zložku „%.255s“„%s“ je v kolízii s „%s“„%s“ obsahuje používateľom definovanú hodnotu Priority „%s“„%s“ neberie hodnotupole „%s“ obsahuje neplatné meno balíka „%.255s“: %sv poli „%s“ chýba názov architektúry alebo obsahuje nezmysly namiesto názvu architektúryv poli „%s“ chýba meno balíka alebo obsahuje nezmysly namiesto názvupole „%s“ odkazujúce na „%.255s“:
+ „%c“ je zastaralé, použité „%c=“ alebo „%c%c“„pole %s“ odkazujúce na „%.255s“:
+ zlý vzťah verzie %c%cpole „%s“ odkazujúce na „%.255s“:
+ implicitná priama zhoda čísla verzie, návrh: použite namiesto toho „=“„pole %s“ odkazujúce na „%.255s“:
+ číslo verzie nezačína alfanumerickým znakom. Návrh: pridajte medzerupole „%s“ odkazujúce na „%.255s“: neplatný názov architektúry „%.255s“: %spole „%s“ odkazujúce na „%.255s“: verzia neukončenásyntaktická chyba v poli „%s“ po odkaze na balík „%.255s“„%s“ vyžaduje uvedenie hodnoty„%s“ nebol nájdený v premennej PATH alebo nie je spustiteľný(Vyskytlo sa zmiznutie balíka %s, ktorý bol úplne nahradený.)
+(Číta sa databáza ... (popis nie je k dispozícii)(celkom %jd bajtov)
+, bol uložený výpis pamätevoľba -%c nemá priradenú hodnotuvoľba -%c má priradenú hodnotu--%s --pending neprijíma žiadne argumenty--%s --recursive vyžaduje aspoň jednu cestu ako argument--%s vyžaduje <názov>--%s vyžaduje <názov> <cestu>--%s potrebuje názov .deb súboru--%s vyžaduje parameter <adresár>--%s vyžaduje parameter <súbor>--%s vyžaduje jediný parameter--%s potrebuje cieľový adresár.
+Možno by ste mali použiť dpkg --install ?--%s vyžaduje platný názov balíka, ale „%.250s“ nie je; %s--%s vyžaduje ako argument aspoň jeden súbor s balíkom--%s vyžaduje ako parameter aspoň jeden názov balíka--%s vyžaduje štyri parametrevoľba --%s nemá priradenú hodnotuvoľba --%s má priradenú hodnotu--%s vyžaduje kladný osmičkový argument--%s vyžaduje jeden alebo viac parametrov častí súboru--%s vyžaduje najviac dva argumenty--%s potrebuje najviac dva parametre (.deb a adresár)--%s vyžaduje práve jeden parameter--%s vyžaduje práve dva paramatre--%s nevyžaduje argumenty--%s vyžaduje ako parameter jeden názov balíka--%s potrebuje len jeden parameter (názov .deb súboru)--auto vyžaduje presne jednu časť parametru súboru--auto vyžaduje použitie voľby --output--compare-versions zlá relácia--compare-versions vyžaduje tri argumenty: <verzia> <vzťah> <verzia>--search potrebuje najmenej jeden argument vzorky názvu súboru--split potrebuje ako argument zdrojový názov súboru--split vyžaduje najviac zdrojový názov súboru a začiatok cieľovej cestybolo zadané --update, ale %s neexistuje--update je nepoužiteľný pri --remove... vyzerá to, že sa to podarilo.../%s; aj keď:
+<compress> z tar -cf<deb> je názov formátu archívu Debianu.
+<csúbor> je názov riadiaceho súboru.
+<cpoložka> je názov položky v hlavnom súbore „control“.
+
+<dekompresia><odkaz> a <cesta> sa nemôžu zhodovať<odkaz> je symbolický odkaz na %s/<názov>.
+  (napr. /usr/bin/pager)
+<názov> je hlavný názov skupiny odkazov.
+  (napr. stránkovač)
+<cesta> je umiestnenie jedného z alternatívnych cieľových súborov.
+  (napr. /usr/bin/less)
+<priorita> je celé číslo; voľby s vyššími číslami majú vyššiu
+  prioritu v automatickom režime.
+
+<stav balíka a popisovač súboru priebehu><štand. chybový><štand. vstup><štand. výstup>Pridáva sa „%s“
+Povoliť inštaláciu konfliktných balíkovAlternatíva %s nezmenená, pretože možnosť %s nie je dostupná.Vždy inštalovať chýbajúce konfiguračné súboryVždy používať nové konfiguračné súbory, nepýtať saVždy používať staré konfiguračné súbory, nepýtať saIný proces zamkol zápis do databázy a je možné, že ju momentálne mení.
+Niektoré z nasledových problémov môžu byť spôsobené tým.
+ArchitektúraOveruje sa %s ...
+Príkazy:
+  --check-supported                Skontrolovať, či bežiaci dpkg podporuje spúšťače.
+
+Príkazy:
+  --install <odkaz> <názov> <cesta> <priorita>
+    [--slave <odkaz> <názov> <cesta>] ...
+                            pridá skupinu do systému alternatív
+  --remove <názov> <cesta>  odstráni <cestu> zo skupiny alternatív <názov>
+  --remove-all <názov>      odstráni skupinu <názov> zo systému alternatív
+  --auto <názov>            prepne odkaz <názov> do automatického režimu
+  --display <názov>         zobrazí informácie o skupine <názov>
+  --query <name>            strojovo čitateľná verzia --display <názov>
+  --list <názov>            zobrazí všetky ciele skupiny <názov>
+  --get-selections          vypíše primárne alternatívy názvov a ich stav
+  --set-selections          prečíta alternatívny stav zo štand. vstupu
+  --config <názov>          zobrazí alternatívy skupiny <názov> a požiada
+                            používateľa o voľbu tej, ktorá sa použije
+  --set <názov> <cesta>     nastaví <cestu> ako alternatívu pre <názov>
+  --all                     zavolá --config na všetky alternatívy
+
+Príkazy:
+  -s|--split <súbor> [<prefix>]  rozdelí archív
+  -j|--join <časť> <časť> ...    spojí dohromady časti
+  -I|--info <časť> ...           zobrazí údaje o časti
+  -a|--auto -o <celok> <časť>    automaticky spojí časti
+  -l|--listq                     vypíše nehodiace sa časti
+  -d|--discard [<súbor> ...]     ignoruje nehodiace sa časti
+
+Príkazy:
+  [--add] <súbor>           pridá odklonenie
+  --remove <súbor>          odstráni odklonenie
+  --list [<vzor-glob>]      zobrazí odklonenie súboru
+  --listpackage <súbor>     zobrazí ktorý balík odkláňa súbor
+  --truename <súbor>        vráti odklonený súbor
+
+Operátory porovnania pre --compare-versions sú:
+  lt le eq ne ge gt       (neexistenciu verzie považuje za staršiu ako čokoľvek);
+  lt-nl le-nl ge-nl gt-nl (neexistenciu verzie považuje za novšiu ako čokoľvek);
+  < << <= = >= >> >       (iba kvôli kompatibilite so syntaxou súboru control).
+
+Nastaviť akýkoľvek balík, ktorý môže pomôcť tomutoProgram „%s“ na údržbu balíkov Debianu, verzia %s.
+Nástroj „%s“ spúšťačov balíkov Debianu, verzia %s.
+Debian %s verzia %s.
+Debian „%s“ backend pre archív balíkov, verzia %s.
+Debian „%s“ program na údržbu balíkov, verzia %s.
+Debian „%s“ nástroj na rozdeľovanie/spájanie balíkov; verzia %s.
+Vymazaný %s.
+Závislosti a konfliktyPopisPožadovaný=Neznámy/Inštalovať/Odstrániť/Vyčistiť/Podržať
+| Stav=Nie/Inštalovaný/Konfig-súbory/Rozbalený/Zlý-konfig/Polo-inštalovaný/očak-spúšť/čaká-na-spúšť
+|/ Chyba?=(žiadna)/Reinšt-vyžadovaná (Stav,Chyba: veľké písmeno=zle)
+Nevykonávať bezpečné V/V operácie počas rozbaľovaniaVyskytli sa chyby počas spracovania:
+Stav ukončenia:
+  0 = OK
+  1 = s voľbou --auto súbor nie je časť
+  2 = problém
+Súbor „%.250s“ nie je časťou archívu skladajúceho sa z viacerých častí.
+Syntax formátu:
+  Formát je reťazec, ktorý bude výstupom pre každý balík. Formát môže
+  obsahovať štandardné únikové klauzuly \n (nový riadok), \r (návrat
+  vozíka) alebo \\ (obyčajná spätná lomka). Informácie o balíku možno
+  zahrnúť vložením odkazov na premenné do polí balíka použitím syntaxe
+  ${var[;width]}. Polia budú zarovnané doprava, ak bude šírka záporná,
+  inak bude použité zarovnanie doľava.
+Všeobecne užitočné informácie o priebehuignoruje sa požiadavka na odstránenie zdieľaného odklonenia „%s“.
+Ignoruje sa požiadavka na premenovanie súboru „%s“, ktorý vlastneného odklonením balíka „%s“
+Informácie o %d balíku boli aktualizované.
+Informácie o %d balíkoch boli aktualizované.
+Informácie o %d balíkoch boli aktualizované.
+Šialené množstvo bľabotuNainštalovať balík aj ak neprejde kontrolou autentickostiInštalovať aj ak by to pokazilo iný balíkInštaluje sa nová verzia konfiguračného súboru %s ...
+Vyvolanie a stav skriptov na údržbuPrebytočné súbory zanechané v uskladňovacom adresári:
+Opúšťa sa „%s“
+Veľa informácií o závislostiach a konfliktochVeľa bľabotu o napr. adresári dpkg/infoVeľa informácií o každom konfiguračnom súboreVeľa informácií o každom spracovanom súboreVeľa informácií o aktivácii a spracovaní spúšťačovViac ako jedna kópia balíka %s bola rozbalená
+ v tomto behu! Konfiguruje sa len jedenkrát.
+NázovOdklonenie „%s“ neexistuje, takže sa neodstránilo
+Pozn.: premenná PATH používateľa root by mala obsahovať /usr/local/sbin, /usr/sbin a /sbinNiet čo konfigurovať.Ponúknuť nahradenie konfiguračných súborov bez nových verziíVoľby:
+  --depotdir <adresár>             Použije <adresár> namiesto %s/%s
+  -S|--partsize <veľkosť>          V KiB, pre -s (predvolená je 450)
+  -o|--output <súbor>              Názov súboru pre -j (predvolený je
+                                     <balík>_<verzia>_<arch>.deb)
+  -Q|--npquiet                     Nič nevypisuje, pokiaľ -a nie je časťou
+  --msdos                          generuje názvy 8.3
+
+Vypísať pri každom konfiguračnom súboreVypísať každý spracovaný súborPrepísať odklonený súbor neodklonenou verziouPrepísať súbor z jedného balíka inýmPrepísať adresár jedného balíka súborom inéhov ceste PATH chýbajú dôležité programy, pravdepodobne sa vyskytnú problémypremenná PATH nie je nastavenáBalík %s je v stave podržaný, ponecháva sa. Použite --force-hold na prekonanie.
+Balík %s uvedený viac ako jedenkrát, spracuje sa len raz.
+Balík „%s“ neobsahuje žiadne súbory (!)
+Zatiaľ nezostavené balíky:
+Časť %d balíka %s je naplnená (stále potrebuje Cestapole Pre-DependsPrioritaSpracovávať aj balíky s nesprávnou alebo neuvedenou architektúrouSpracovávať aj balíky s nesprávnymi verziamiSpracovanie bolo zastavené, pretože sa vyskytlo príliš veľa chýb.
+Balík %s sa skladá z %d časti: Balík %s sa skladá z %d častí: Balík %s sa skladá z %d častí: Zaznamenané informácie o %s z %s.
+Odstrániť nevyhnutný balíkOdstraňovať balíky, ktoré vyžadujú inštaláciuOdstraňuje sa „%s“
+Nahradiť balík nižšou verziouNahradzujú sa informácie o dostupných balíkoch, pomocou %s.
+Vyberá sa predtým nevybraný balík %s.
+VýberNastaviť všetky voľby vynúteniaNastavuje sa balík %s (%s) ...
+Prehnané množstvo informácií o spúšťačochPreskočiť neplatný riadok: %sPreskočiť neznámu alternatívu %s.Preskakuje sa nevybraný balík %s.
+Balík %s sa rozdeľuje na %d časť: Balík %s sa rozdeľuje na %d časti: Balík %s sa rozdeľuje na %d častí: StavNasledovné balíky očakávajú spracovanie spúšťačov (triggers-awaited), ktoré
+aktivovali v iných balíkoch. Toto spracovanie je možno vyžiadať  pomocou
+dselect alebo dpkg --configure --pending (alebo dpkg --triggers-only):
+Nasledovné balíky sa počas inštalácie dostali do problémov. Aby
+ tieto balíky (a všetky na nich závislé) pracovali správne, musia byť
+ preinštalované:
+Nasledovné balíky chýbajú v riadiacom súbore zoznamu
+v databáze. Je potrebné ich znova nainštalovať:
+Nasledovné balíky chýbajú v riadiacom súbore md5sums
+v databáze. Je potrebné ich znova nainštalovať:
+Nasledovné balíky sú len čiastočne nakonfigurované, pravdepodobne z dôvodu
+ problémov počas ich prvotnej konfigurácie. Konfigurácia by mala byť zopakovaná
+ použitím dpkg --configure <balík>, alebo výberom položky konfigurácia v menu
+ dselect-u:
+Nasledovné balíky sú len čiastočne nainštalované, pravdepodobne z dôvodu
+ problémov počas inštalácie. Inštalácia môže byť pravdepodobne dokončená
+jej opakovaním; balíky môžu byť odstránené použitím dselect-u alebo pomocou dpkg --remove:
+Nasledovné balíky nemajú architektúru:
+Nasledovné balíky majú neplatnú architektúru:
+Nasledovné balíky majú neznámu cudziu architektúru, čo spôsobí
+problémy so závislosťami v rozhraniach. To je možné opraviť
+zaregistrovaním cudzej architektúry pomocou dpkg --add-architecture:
+Nasledovné balíky boli spustené, ale spracovanie spúšťačov ešte nebolo
+dokončené. Spracovanie spúšťačov je možno vyžiadať  pomocou
+dselect alebo dpkg --configure --pending (alebo dpkg --triggers-only):
+Nasledovné balíky boli rozbalené, neboli ale ešte nakonfigurované.
+Aby pracovali, musia byť nakonfigurované pomocou príkazu dpkg --configure
+alebo výberom položky konfigurácia v menu dselectu:
+Existuje %d možnosť alternatívy %s (poskytujúcej %s).Existujú %d možnosti alternatívy %s (poskytujúcej %s).Existuje %d možností alternatívy %s (poskytujúcej %s).Neexistuje program poskytujúci %s.V skupine odkazov existuje iba jedna alternatíva %s (poskytujúca %s): %sToto je slobodný softvér; podrobnosti o podmienkach kopírovania
+nájdete v GNU General Public Licence verzie 2 alebo neskoršej.
+Neposkytuje sa ŽIADNA záruka.
+Aktivácia a spracovanie spúšťačovPokúsiť sa (od)inštalovať veci aj ak nie ste rootUrobí zo všetkých problémov so závislosťami upozorneniaUrobí z problémov s verziami závislosťami upozorneniaPo skončení napíšte „exit“.
+Napíšte dpkg-deb --help pre pomocníka o manipulácii s *.deb súbormi;
+Napíšte dpkg --help pre pomocníka o inštalácii a deinštalácii balíkov.Napíšte dpkg-split --help pre pomocníka.Pomocníka k tomuto nástroju zobrazíte napísaním dpkg-trigger --helpAktualizujú sa informácie o dostupných balíkoch, pomocou %s.
+Použitie: %s [<voľba> ...] <príkaz>
+
+Pomocníka o odkloňovaní súborov vyvoláte pomocou --help.Pomocníka o preťažovaní stat informácií súborov vyvoláte pomocou --help.Pomocníka o dopytovaní sa na balíky vyvoláte pomocou --help.Používať predvolenú voľbu pre nové konfiguračné súbory
+ak je dostupná, nepýtať sa. Ak nič nie je predvolené,
+budete vyzvaní ak ste zároveň nezadali jednu z volieb
+confold alebo confnewVerziaVerzia dpkg s fungujúcou podporou %s ešte nie je nakonfigurovaná.
+ Použite prosím „dpkg --configure dpkg“ a skúste to znova.
+Pri pridávaní je predvolené --local a --divert <original>.distrib.
+Pri odstraňovaní musí byť zadané --package alebo --local a --divert.
+Predinštalačné a poinštalačné skripty by mali vždy používať --package
+a --divert.
+[predvolené=N][predvolené=Y][bez predvoľby]admindir musí byť vnútri instdir, aby dpkg fungoval správnetaktiež sa konfiguruje „%s“ (vyžaduje ho „%s“)alternatíva %s (súčasť skupiny odkazov %s) neexistuje. Odstraňuje sa zo zoznamu alternatív.alternatíva %s nemôže byť primárna: je to závislý odkaz %salternatíva %s nemôže byť závislosťou %s: je to primárna alternatívaalternatíva %s nemôže byť závislosťou %s: je to závislosť %salternatíva %s pre %s nie je registrovaná, takže sa neodstraňujealternatíva %s pre %s nie je zaregistrovaná, takže sa nenastavujeodkaz alternatívy %s už spravuje %sodkaz alternatívny odkaz %s už spravuje %s (závislosť %s)odkaz alternatívy nie je absolútny, čo by mal byť: %snázov alternatívy (%s) nesmie obsahovať „/“ a medzerycesta alternatívy nie je absolútna, čo by mala byť: %snejednoznačný názov balíka „%s“ s viac ako jednou nainštalovanou inštanciouprekonanie „%s“ už existuje, ale kvôli uvedenému --force bude ignorovanéprekonanie „%s“ už existuje, prerušuje saľubovoľné odklonenie %sľubovoľné odklonenie %s na %snázov člena ar „%s“ je príliš dlhýveľkosť člena ar %jd je príliš veľká<neznámy>architektúra „%s“ je neplatná: %sarchitektúra „%s“ je vyhradená a nemožno ju pridaťarchív „%.250s“ obsahuje dva riadiace členy, ukončuje saarchív obsahoval objekt „%.255s“ neznámeho typu 0x%xveľkosť riadiaceho člena archívuarchív nemá bodku vo verzii formátu: %sarchív má chybný formát veľkosti riadiaceho člena „%s“archív neobsahuje nové riadky v hlavičkečlena informačnej hlavičky archívuneznáma verzia formátu %d.%d; potrebujete novší dpkg-debmagické číslo verzie archívuhlavička člena archívučísla častí archívuoffset časti archívupočet častí archívucelková veľkosť archívuautomatický režimautomatické aktualizácie %s/%s sú zakázané, zmeny sa nevykonajúčaká sa na spracovanie spúšťačov iným balíkom (triggers-awaited)prázdny riadok v hodnote poľa „%.*s“pokazený z dôvodu chyby pri odstraňovaní alebo inštaláciipokazený z dôvodu chyby v postinstnemožno nainštalovať neznámu voľbu %snie je možné vykonať funkciu mmap na info súbor balíka „%.255s“nie je možné odstrániť starý postrm skriptnie je možné zistiť stav súboru s informáciami o balíku „%.255s“nepodarilo sa pridať k členský súbor ar (%s) do „%s“: %snie je možné pridať časť rozdeleného balíka „%s“ na „%s“: %snedá sa dopisovať do súboru „%s“nie je možné zatvoriť rúru dekompresoranepodarilo sa vypočítať MD5 haš súboru „%s“: %snie je možné vypočítať haš MD5 súboru tar „%.250s“: %snie je možné skopírovať „%s“ do archívu „%s“: „%s“nepodarilo sa skopírovať „%s“ na „%s“: %snie je možné skopírovať člena archívu z „%s“ do rúry dekompresora: %snie je možné skopírovať dáta „%.250s“ do „%.250s“: %snie je možné odkloniť súbor „%s“ na seba saméhonie je možné extrahovať riadaici súbor „%s“ z „%s“: %snie je možné extrahovať časť rozdeleného archívu „%s“: „%s“nie je možné otvoriť „%.255s“ (v „%.255s“)nie je možné otvoriť časť archívneho súboru „%.250s“nedá sa prečítať informácia o adresárinie je možné odstrániť „%.250s“nemožno odstrániť architektúru „%s“, ktorú momentálne používa databázanemožno odstrániť architektúru „%s“, ktorá nie je cudzianie je možné odstrániť starý záložný konfiguračný súbor „%.250s“ (z „%.250s“)nie je možné odstrániť starý konfiguračný súbor „%.250s“ (= „%.250s“)nie je možné odstrániť zoznam starých súborovnepodarilo sa premenovať „%s“ na „%s“nie je možné vyriešiť pred-závislosti pre %.250s (vyžadované pre %.250s)nie je možné skenovať adresár „%.255s“nie je možné zistiť obsah adresára s aktualizáciami „%.250s“nie je možné určiť ako uspokojiť pred-závislosti:
+ %snie je možné preskočiť dáta časti z „%s“: %snie je možné preskočiť člena archívu „%s“: %snie je možné preskočiť súbor „%.255s“ (nahradený alebo vynechaný?) z rúry: %snie je možné preskočiť odsadenie súboru „%.255s“: %snie je možné preskočiť hlavičku rozdeleného balíka „%s“: %snie je možné zistiť stav „%.255s“ (v „%.255s“)nepodarilo sa vykonať stat() súboru „%s“nie je možné zrušiť možné koncové nuly z dpkg-deb: %sznak „%c“ nie je prípustný (prípustné sú len písmená, čísla a znaky „%s“)komprimované dáta sú poškodenékonfiguračný súbor „%.250s“ nebol v balíku nájdenýu konfiguračného súboru „%.250s“ nie je možné zistiť stavkonfiguračný súbor „%s“ nie je čistý súborvizualizátor rozdielov konfiguračných súborov conffilenázov konfiguračného súboru „%s“ obsahuje na konci netlačiteľné znakynázov confsúboru „%s“ je duplicitnýshell konfiguračných súborov conffilekonfiguračná chyba: %s:%d: %sodporujúce si operácie -%c (--%s) a -%c (--%s)odchýlky „%.250s“ alebo „%.250s“ sú v konfliktekonflikt balíkov - nebude sa inštalovať %.250suvažuje sa o odkonfigurovaní %s, ktorý by %s pokazil ...uvažuje sa o odkonfigurovaní nevyhnutného
+ balíka %s, ktoré umožní %s.uvažuje sa o odstránení %s v prospech %s ...riadiaci adresár má zlé práva %03lo (musia byť >=0755 a <=0775)riadiaci adresár nie je adresárriadiaci súbor „%s“ neexistujeriadiaci súbor obsahuje %criadiaci členPoškodený formát súbory databázy info „%s“nebolo možné otvoriť záznam „%s“: %snedá sa zistiť stav starého súboru „%.250s“, takže sa nebude mazať: %snie je možné otvoriť „%i“ pre tokaktuálna alternatíva %s je neznáma, prepína sa na %s pre skupinu odkazov %spri spracovaní spúšťačov bol nájdený cyklus:
+ reťazec balíkov, ktorých spúšťače sú alebo môžu byť za to zodpovedné:dátový členproblémy so závislosťami - po necháva sa nenakonfigurovanéproblémy so závislosťami - neodstraňuje saproblémy so závislosťami zabránili konfigurácii balíka %s:
+%sproblémy závislosti zabránili odstráneniu %s:
+%szahadzuje sa zastaralý závislý odkaz %s (%s)odsunuté balíkom %s z: %s
+odsunuté balíkom %s do: %s
+odklonenie %s balíkom %sodklonenie %s na %s balíkom %skam-odkloniť nemôže obsahovať znaky nového riadkaodsunuté balíkom %s do: %s
+dokončené
+inštaluje sa staršia verzia %.250s z %.250s na %.250s.dpkg nie je uvedené ako nainštalované, nie je možné skontrolovať podporu %s!
+duplicitný názov balíka v očakávanom spúšťači (triggers-awaited) „%.255s“duplicitný súbor záujmu spúšťača pri názve súboru „%.250s“ a balíka „%.250s“duplicitná cesta %sduplicitný čakajúci spúšťač (triggers-pending) „%.255s“duplicitný závislý odkaz %sduplicitný názov závislého %sduplicitná hodnota poľa „%s“duplicitná hodnota používateľom definovaného poľa „%.*s“prázdny reťazec z funkcie fgets počas čítania súboruprázdne názvy spúšťačov nie sú dovolenéepochepocha vo verzii je záporné čísloepocha vo verzii nie je čísloepocha vo verzii je príliš veľkáchybachyba pri kontrole „%s“chyba pri zatváraní %.250schyba pri uzatváraní konfiguračného súboru „%.255s“chyba pri uzatváraní/zápise „%.255s“chyba pri vytváraní zariadenia „%.255s“chyba pri vytváraní adresára „%.255s“chyba pri vytváraní pevného odkazu „%.255s“chyba pri vytváraní nového záložného súboru „%s“chyba pri vytváraní rúry „%.255s“chyba pri vytváraní symbolického odkazu „%.255s“chyba potvrdzujúca, že „%.250s“ neexistujechyba pri vykonávaní funkcie „%s“, chybový kód %dchyba pri formátovaní reťazca do premennej varbufchyba vo formáte show: %schyba pri inštalovaní nového súboru „%s“chyba pri otváraní konfiguračných súborovchyba pri otváraní konfiguračného súboru „%s“chyba pri čítaní %.250schyba pri čítaní %s zo súboru %.255schyba pri čítaní konfiguračných súborovchyba pri čítaní z rúry dpkg-debchyba pri čítaní odloženého súboru spúšťača „%.250s“chyba pri odstraňovaní starého záložného súboru „%s“chyba pri nastavovaní vlastníckych práv u „%.255s“chyba pri nastavovaní vlastníckych práv symbolického odkazu „%.255s“chyba pri nastavovaní prístupových práv u „%.255s“chyba pri nastavovaní časovej značky u „%.255s“chyba pri pokuse otvoriť %.250schyba pri odblokovaní signálu %s: %s
+chyba pri zápise „%s“chyba pri zápise „%.250s“chyba pri zápise „%s“chyba pri zápise do zoznamu architektúrchyba pri zápise na štandardnom chybovom výstupe, objavene pred otázkou na konfiguračné súborynepodarilo sa alokovať pamäťzlyhalo alokovanie pamäte pre novú položku v zozname balíkov,
+ ktorých inštalácia sa nepodarila: %snie je možné zmeniť adresár na „%.255s“zlyhalo vykonanie chdir do adresárazlyhalo vykonanie funkcie chroot na „%.255s“zlyhalo uzavretie po načítaní: „%.255s“zlyhalo vytvorenie adresárachyba pri vytváraní rúryzlyhalo vykonanie funkcie dup pre fd %dzlyhalo vykonanie funkcie dup pre std%snie je možné vykonať fstat členského súboru ar (%s)nie je možné vykonať funkciu fstat na archívzlyhalo vykonanie funkcie fstat v súbore s odchýlkamizlyhalo vykonanie funkcie fstat v súbore statoverridenie je možné vytvoriť dočasný súbor (%s)zlyhalo otvorenie konfiguračného súboru „%.255s“ na čítanie: %szlyhalo otvorenie súboru s odchýlkamizlyhalo otváranie info súboru balíka „%.255s“ na čítaniezlyhalo otvorenie súboru statoverridenepodarilo sa otvoriť súbor záujmu spúšťača „%.250s“nepodarilo sa prečítaťnie je možné prečítať „%.255s“ (v „%.255s“)nie je možné čítať archív „%.255s“zlyhalo odstránenie pridruženého aktualizačného súboru %.255schyba pri odstraňovaní môjho vlastného aktualizačného súboru %.255snie je možné prejsť na začiatok dočasného súboru (%s)nepodarilo sa vrátiť na začiatok súboru záujmu spúšťača „%.250s“nepodarilo sa presunúť ukazovateľ čítania (seek)nie je možné vykonať stat() (dereferencovanie) existujúceho symbolického odkazu „%.250s“nepodarilo sa vykonať stat() (dereferencovanie) na navrhovanom novom cieli symbolického odkazu „%.250s“ symbolického odkazu „%.250s“nie je možné vykonať stat dočasného súboru (%s)zlyhalo zmazanie dočasného súboru (%s), %snepodarilo sa zapísaťzlyhal zápis záznamu datanázy %s o „%.50s“ do „%.250s“chyba pri zápise podrobností „%.50s“ do „%.250s“nepodarilo sa zapísať názov súboru do rúry programu tar (%s)funkcia fgets vrátila prázdny reťazec z „%.250s“za poľom „%.*s“ musí nasledovať dvojbodkapole šírka je mimo platného rozsahusúbor „%.250s“ má neplatnú verziu formátu: %ssúbor „%.250s“ je poškodený - %.250s chýbasúbor „%.250s“ je poškodený - zlý MD5 kontrolný súčet „%.250s“súbor „%.250s“ je poškodený - chybná hlavička člena archívusúbor „%.250s“ je poškodený - chybné číslo časti archívusúbor „%.250s“ je poškodený - nesprávne číslice (kód %d) v %ssúbor „%.250s“ je poškodený - chybné magické znaky na konci prvého záhlaviasúbor „%.250s“ je poškodený - chybný magický znak na konci druhej hlavičkysúbor „%.250s“ je poškodený - zlý počet častí archívusúbor „%.250s“ je poškodený - zlé doplnenie znaku (kód %d)súbor „%.250s“ je poškodený - chýbajúci nový riadok za %.250ssúbor „%.250s“ je poškodený - chýba lomka medzi číslami častí archívusúbor „%.250s“ je poškodený - nuly v info sekciisúbor „%.250s“ je poškodený - druhý člen nie je súčasťou dátsúbor „%.250s“ je poškodený - veľkosť je zlá pre uvedené číslo súčastisúbor „%.250s“ je poškodený - príliš krátkysúbor „%.250s“ je poškodený - chybný počet častí pre uvedené veľkostisúbor „%.250s“ je verzia formátu %d.%d; potrebujete novší dpkg-splitsúbor „%.250s“ nie je súčasťou archívusúbor „%s“ je poškodený: celé číslo mimo platného rozsahu v %ssúbor „%s“ nie je súčasťou archívu
+formát súboru nebol rozpoznanýsúbor vyzerá ako archív, ktorý bol poškodený
+ sťahovaním v režime ASCIInázov súboru nemôže obsahovať znaky nového riadkazáznam spúšťača zmieňuje neplatný názov balíka „%.250s“ (súbor záujmu spúšťača „%.250s“): %.250snázov súboru „%s“ nie je absolútnysúbory „%.250s“ a „%.250s“ nie sú súčasťou toho istého súboruzoznam súborov balíka „%.250s“ obsahuje prázdny názov súboruv zozname súborov balíka „%.250s“ chýba na konci znak nového riadkasúbor so zoznamom súborov balíka „%.250s“ chýba, predpokladá sa, že balík nemá momentálne nainštalované žiadne súboryvynucuje sa reinštalácia alternatívy %s, pretože skupina odkazov %s je poškodenáfunkcia fork zlyhalapo verzii formátu nasledujú nezmyselné znakyverzia formátu nemá bodkuformátovať číslo verzieverzia formátu s prázdnou zložkou „major“verzia formátu s prázdnou zložkou „minor“vytvorená poškodená hlavička ar „%s“hlavička je príliš dlhá, čo robí časť príliš dlhou: názov alebo číslo
+verzie balíka musia byť výnimočne dlhé alebo niečo: ukončuje saignoruje sa %d upozornenie o riadiacom súbore(och)ignorujú sa %d upozornenia o riadiacom súbore(och)ignoruje sa %d upozornení o riadiacom súbore(och)ignoruje sa pokazenie, je možné pokračovať!ignoruje sa konflikt, je možné pokračovať!ignoruje sa problém so závislosťami balíka %s:
+%signoruje sa problém s pred-závislosťami!ignoruje sa požiadavka na odstránenie %.250s, ktorý nie je nainštalovanýignoruje sa požiadavka na odstránenie %.250s, v systéme ostali iba
+ jeho konfiguračné súbory. Použite --purge ak chcete odstrániť aj tie.neplatný názov architektúry v špecifikátore „%s:%s“: %sneplatný názov očakávaného balíka „%.250s“: %.250snepovolený názov balíka na riadku %d: %.250snepovolený názov balíka v očakávanom spúšťači „%.255s“: %sneplatný názov balíka v špecifikátore „%s%s%s“: %sneplatný názov čakajúceho spúšťača (triggers-pending) „%.255s“: %sformát databázy info (%d) ne neplatný alebo príliš nový; skúste si nainštalovať novší dpkginštalácii %.250sinštalovanýnainštalovanie %.250s by pokazilo %.250s a
+ odkonfigurovanie nie je povolené (--auto-deconfigure by mohlo pomôcť)nainštalovanie %.250s by pokazilo existujúci softvérvnútorná chyba (chyba v programe)neplatný znak „%c“ (člen archívu „%.250s“) vo veľkosti „%.16s“neplatný znak „%c“ v šírke poľaneplatný znak v čísle revízieneplatný znak v čísle verzieneplatná úroveň kompresie pre -%c: „%ld“neplatné parametre kompresie: %sneplatné celé číslo pre -%c: „%.250s“neplatné číslo pre --%s: „%.250s“neplatná alebo neznáma syntax v názve spúšťača „%.250s“ (v záujmoch spúšťača balíka „%.250s“)neplatný názov balíka „%.250s“ v súbore odložených spúšťačov „%.250s“neplatný stavneplatný názov spúšťača „%.250s“: %.250sneukončený riadok pri pokuse o čítanie %sriadok je príliš dlhý alebo nie je ukončený pri pokuse o čítanie %sodkaz %s je primárny aj závislýlokálne odsunutie z: %s
+lokálne odsunutie %slokálne odklonenie %s na %slokálne odsunutie do: %s
+lokálne odsunutý do: %s
+dlhé názvy súborovskript správcu „%.50s“ má nesprávne práva %03lo (musí byť >=0555 a <=0775)skript správcu „%.50s“ nie je obyčajný súbor ani symbolický odkazu skriptu správcu „%.50s“ nie je možné zistiť stavfunkcia malloc zlyhala (%zu bajtov)manuálny režimsúbor primárnehohlavný odkazmožné problémy s odstránením %s, pretože poskytuje %s ...nesmie byť prázdny reťazecdosiahnutý limit využitia pamätenezhoda v kam-odkloniť
+  pri odstraňovaní „%s“
+  nájdené „%s“nezhoda v balíku
+  pri odstraňovaní „%s“
+  nájdené „%s“chýba pravá zložená zátvorkasú prítomné inštancie balíkov, ktoré môžu a ktoré nemôžu byť nainštalované súčasne; pravdepodobne kvôli aktualizácii z neoficiálneho dpkgmulti-archviaceré Conflicts a Replacessú prítomné viaceré inštancie balíkov, ktoré nemôžu byť nainštalované súčasne; pravdepodobne kvôli aktualizácii z neoficiálneho dpkgpre súbor „%.250s“ existujú viaceré súbory statoverridemusí sa volať z údržbového skriptu (alebo voľbou --by-package)musí začať alfanumerickým znakommusí začať alfanumerickým znakomnázov %s je primárny aj závislývyžaduje sa zadanie voľby určujúcej operáciunový riadok v poli „%.*s“nové riadky sú zakázané v súboroch update-alternatives (%s)žiadne alternatívy pre %snie je prítomné žiadne prekonaniežiadne informácie o balíku v „%.255s“balík nazvaný „%s“ nie je nainštalovaný, nie je možné ho konfigurovaťnenašli sa žiadne balíky zodpovedajúce %snenašla sa žiadna cesta zodpovedajúca vzoru %snie, %s je nevyhnutný, nebude odkonfigurovaný,
+ aby sa umožnil %snie, nie je možné pokračovať v %s (--auto-deconfigure pomôže):
+%snekontroluje sa obsah riadiacej oblastinenainštalovanýnenainštalované, ale konfiguračné súbory zachovanéneodstraňuje sa %s, pretože to nie je symb. odkaznenahrádza sa %s odkazomza dvojbodkou v čísle verzie nič nenasledujeprázdny názov balíka v čiarkami oddelenom zozname --%s „%.250s“počet častí archívuzastaralá voľba „--%s“; nedostupné balíky budú automaticky vyčistenéstarý konfiguračný súbor „%.250s“ je prázdny adresár (a teraz bol zmazaný)starý súbor „%.250s“ je rovnaký ako niekoľko nových súborov! („%.250s“ aj „%.250s“)stará verzia balíka má príliš dlhý názov info súboru, ktorý začína „%.250s“otvorenie zložky „%.255s“ (v %.255s) zlyhalo neočakávaným spôsobomnedostatok pamäte pre novú čistiacu položkunedostatok pamäte pre novú čistiacu položku s množstvom argumentovnedostatok pamäte pre nový kontext chybyprekonáva sa problém, pretože je nastavené --force: balík %.250s je už nainštalovaný a nakonfigurovanýbalík %.250s nie je pripravený na konfiguráciu
+ nie je možné konfigurovať (súčasný stav „%.250s“)balík %.250s nie je pripravený na spracovanie spúšťačov
+ (súčasný stav „%.250s“, nečaká sa na žiadne spúšťače
+ (triggers-pending))balík %s %s nie je možné nakonfigurovať, pretože %s má inú verziu (%s)balík %s nie je možné nakonfigurovať, pretože %s nie je pripravený (súčasný stav „%s“)balík %s obsahoval zoznam ako info súborbalík %s vyžaduje reinštaláciu, ale bude odstránený ako ste požadovalibalík %s vyžaduje reinštaláciu, nepokračuje sa v odinštalovaníbalík %s bol v stave podržaný, napriek tomu sa vykonaná operácia, ktorú ste požadovalibalík „%s“ nie je dostupnýbalík „%s“ nie je nainštalovanýbalík „%s“ nie je nainštalovaný a nie sú o ňom dostupné žiadne informáciearchitektúra balíkaarchitektúra balíka (%s) nezodpovedá systému (%s)balík obsahuje príliš dlhý názov riadiaceho info súboru (začínajúci „%.50s“)riadiaci info balík obsahoval adresár „%.250s“funkcia rmdir u informácií o riadení balíka „%.250s“ nepovedala, že to nie je adresárextrakcia riadiacich informácií balíkabalík odsúva ostatné do: %s
+extrakcia hodnoty poľa balíkakontrolný súčet MD5 súboru balíkaextrakcia súborového systému archívu balíkabalík je v stave %s, ale očakávajú sa spúšťače (triggers-awaited)balík je v stave %s, ale očakávajú sa spúšťače (triggers-pending)názov balíka nemôže obsahovať znaky nového riadkanázov balíkanázov balíka obsahuje znaky, ktoré nie sú malými písmenami alebo „-+.“overenie podpisu balíkačíslo verzie balíkačasť %d chýbačasť súboru „%.250s“ nie je obyčajný súborveľkosť časti je buď príliš veľká alebo negatívnaveľkosť časti musí byť aspoň %d KiB (kvôli hlavičke)prešiel
+vložiťproblém s pred-závislosťami - neinštaluje sa %.250sprioritapriorita musí byť celé číslopriorita %s je mimo platného rozsahu: %spriorita %s: %schyba pri čítaní v %.250schyba pri čítaní v „%.250s“chyba pri čítaní v konfiguračnom súbore „%.255s“chyba pri čítaní zo štandardného vstupuchyba pri čítaní na štandardnom vstupe pri otázke na konfiguračné súboryčíta sa súbor s informáciami o balíku „%.255s“číta sa súbor statoverride „%.250s“znovuzostavený súbor balíkaohľadom %s obsahujúci %s, problém s pred-závislosťami:
+%sohľadom %s obsahujúci %s:
+%sodstránení %.250sodstraňuje sa architektúra „%s“, ktorú momentálne používa databázaodstraňuje sa manuálne zvolená alternatíva - prepína sa %s na automatický režimpremenovanie znamená prepísanie „%s“
+  súborom „%s“, čo nie je povolenépremenovanie: odstránenie duplicitného starého odkazu „%s“požadovaná operácia vyžaduje oprávnenie superpoužívateľapríkaz rm na vyčistenieprehľadané, nebol ale nájdený žiadny balík (súbory vyhovujúce *.deb)<neznámy>nastavuje sa automatický výber %sbolo zistených niekoľko info položiek balíka, prípustná je iba jednapríkaz shellu na presúvanie súborovpreskočené vytvorenie %s, pretože príslušný súbor %s (zo skupiny odkazov %s) neexistujesúbor závisléhozávislý odkazzávislý odkaz je totožný s hlavným odkazom %snázov závisléhozdrojový súbor „%.250s“ nie je obyčajný súborrozdeliť znovuzloženie balíkasúbor statoverride obsahuje prázdny riadokv súbore statoverride chýba na konci znak nového riadkastavzáznam stavuodstraňujú sa koncové /podproces %s vrátil chybový kód %dveľkosť symbolického odkazu „%.250s“ sa zmenila z %jd na %zdsyntaktická chyba v súbore spúšťača súboru „%.250s“syntaktická chyba v súbore statoverridepotrebuje jeden parameter, názov spúšťačacieľ je adresárom - nie je možné preskočiť kontrolu riadiaceho súborunájdených niekoľko verzií časti %d - najmenej „%.250s“ a „%.250s“v novej verzii balíka nie je žiaden skript - ukončuje sapoužitím „%s --auto %s“ sa vrátite späť na automatické aktualizáciepríliš veľa chýb, ukončuje sapríliš dlhý riadok alebo chýba znak nového riadka v „%.250s“syntaktická chyba v súbore záujmu spúšťača „%.250s“; neplatný názov balíka „%.250s“: %.250snázov spúšťača obsahuje neplatný znakzáznamy spúšťača zatiaľ neexistujúspustenésúbor ci spúšťača „%.250s“ obsahuje neplatnú syntax spúšťača v názve spúšťača „%.250s“: %.250ssúbor ci spúšťača obsahuje neznámu direktívu „%.250s“súbor ci spúšťača „%.250s“ obsahuje neplatnú syntax direktívydátový adresár spúšťača zatiaľ nebol vytvorenýspúšťače v slučke, ignorujú saskúša sa radšej skript z nového balíka ...pokus o prepísanie „%.250s“, ktorý je tiež v balíku %.250s %.250spokus o prepísanie „%.250s“, ktorý je odklonenou verziou „%.250s“pokus o prepísanie „%.250s“, ktorý je odklonenou verziou „%.250s“ (balík: „%.100s“)pokus o prepísanie adresára „%.250s“ v balíku %.250s %.250s neadresárompokus o prepísanie zdieľaného súboru „%.250s“, ktorý sa líši od iných inštancií balíka %.250szadané dva príkazy: --%s a --%snie je možné (znovu)otvoriť vstupnú časť súboru „%.250s“nie je možné zmeniť vlastníctvo cieľového súboru „%.250s“nie je možné skontrolovať existenciu „%.250s“nie je možné skontrolovať stav zamknutia súboru „%s“nie je možné overiť existenciu archívu „%.250s“nie je možné zmeniť vlastnícke práva na záložnom symbolickom odkaze na „%.255s“nie je možné upratať odpad obklopujúci „%.255s“ pred nainštalovaním inej verzienie je možné zatvoriť súbor „%s“nedá sa zatvoriť nový súbor „%.250s“nie je možné zatvoriť nový odložený súbor spúšťača „%.250s“nie je možné uzavrieť aktualizovaný stav „%.250s“nedá sa vytvoriť „%.255s“nie je možné vytvoriť „%.255s“ (počas spracovania „%.255s“)nie je možné vytvoriť súbor „%s“nie je možné vytvoriť nový súbor „%.250s“zlyhalo vytvorenie dočasného adresáranepodarilo sa vytvoriť adresár stavu spúšťačov „%.250s“nie je možné vymazať riadiaci info súbor „%.250s“nedá sa zmazať starý adresár „%.250s“: %snie je možné vymazať použitý uskladňovací súbor „%.250s“nie je možné zahodiť „%.250s“nie je možné spustiť %s (%s)nie je možné naplniť %.250snie je možné vyprázdniť %.250snie je možné vyprázdniť (flush) súbor „%s“nie je možné vyprázdniť (flush) nový súbor „%.250s“nie je možné vyprázdniť aktualizovaný stav „%.250s“nie je možné vykonať funkciu fstat na zdrojový súbornie je možné vykonať funkciu fsync na aktualizovaný stav „%.250s“nepodarilo sa získať popisovač adresára „%s“nie je možné ignorovať signál %s pred spustením %.250snie je možné inštalovať „%.250s“ ako „%.250s“nie je možné nainštalovať (navrhovaný) nový info súbor „%.250s“nie je možné nainštalovať nový info súbor „%.250s“ ako „%.250s“nie je možné nainštalovať nový odložený súbor spúšťača „%.250s“nie je možné nainštalovať novú verziu „%.255s“nie je možné inštalovať aktualizovaný stav „%.250s“nedá sa zamknúť %snie je možné vytvoriť záložný odkaz „%.255s“ pred nainštalovaním novej verzienie je možné vytvoriť záložný symbolický odkaz na „%.255s“nie je možné odsunúť „%.255s“ aby sa dala nainštalovať nová verzianepodarilo sa otvoriť „%.255s“nie je možné otvoriť adresár „%s“nie je možné otvoriť súbor „%s“nie je možné otvoriť nový depot súbor „%.250s“nie je možné otvoriť výstupný súbor „%.250s“nie je možné otvoriť zdrojový súbor „%.250s“nie je možné otvoriť dočasný riadiaci adresárnepodarilo sa otvoriť súbor ci spúšťača „%.250s“nie je možné otvoriť odložený súbor spúšťača „%.250s“nie je možné otvoriť/vytvoriť nový odložený súbor spúšťača „%.250s“nie je možné prečítať uskladňovací adresár „%.250s“nepodarilo sa prečítať nový súbor spúšťača súboru „%.250s“nie je možné čítať príznaky popisovača súboru „%.250s“nie je možné prečítať odkaz „%.255s“nie je možné prečítať časť súboru „%.250s“nedá sa odstrániť „%s“nie je možné odstrániť záložnú kópiu „%.250s“nie je možné odstrániť skopírovaný zdrojový súbor „%s“nie je možné odstrániť novorozbalenú verziu „%.250s“nie je možné odstrániť novonainštalovanú verziu „%.250s“nie je možné odstrániť novonainštalovanú verziu balíka „%.250s“, aby sa umožnila
+reinštalácie záložnej kópienie je možné odstrániť zastaralý info súbor „%.250s“nie je možné premenovať nový uskladňovací súbor „%.250s“ na „%.250s“nie je možné znovu otvoriť časť súboru „%.250s“nie je možné obnoviť záložnú kópiu „%.250s“nedá sa bezpečne odstrániť „%.255s“nedá sa bezpečne odstrániť „%.255s“nedá sa bezpečne odstrániť starý súbor „%.250s“: %spo naplnení nie je možné presunúť sa na začiatok %.250snie je možné nastaviť buffering databázového súboru %snie je možné nastaviť príznak close-on-exec na „%.250s“nie je možné nastaviť práva na spustenie na „%.250s“nie je možné nastaviť režim nového cieľového súboru „%.250s“nie je možné nastaviť premennú prostredia pre skript údržbynie je možné nastaviť premennú prostredia pre podprocesynie je možné zistiť stav %s „%.250s“nie je možné zistiť stav %s „%.250s“: %snie je možné zistiť stav „%.250s“nie je možné zistiť stav riadiaceho adresáranie je možné zistiť stav aktuálneho konfiguračného súboru „%.250s“nepodarilo sa vykonať stat() nového distribučného konfiguračného súboru „%.250s“nedá sa zistiť stav ďalšieho nového súboru „%.250s“nie je možné zistiť stav obnoveného „%.255s“ pred nainštalovaním inej verzienie je možné vykonať stat() zdrojového súboru „%.250s“nie je možné zistiť stav odloženého súboru spúšťača „%.250s“nie je možné vyprázdniť (sync) adresár „%s“nepodarilo sa vyprázdniť (sync) súbor „%.255s“nie je možné vyprázdniť (sync) súbor „%s“nepodarilo sa vyprázdniť (sync) nový súbor „%.250s“nie je možné skrátiť aktualizovaný stav „%.250s“nedá sa odomknúť %snie je možné zapísať súbor „%s“nie je možné zapísať nový súbor „%.250s“nie je možné zapísať nový odložený súbor spúšťača „%.250s“nie je možné zapísať do popisovača stavu fd %dnie je možné zapísať aktualizovaný stav „%.250s“nespárované úvodzovky „%s“neočakávaná chyba bzip2neočakávané dáta za balíkom a výberom na riadku %dneočakávaný koniec súboru v %s v %.255sneočakávaný koniec súboru alebo tokuneočakávaný koniec súboru pri pokuse o čítanie %sneočakávaný koniec vstupuneočakávaný koniec riadka za názvom balíka na riadku %dneočakávaný koniec riadka v názve balíka na riadku %dneočakávaný koniec riadka v súbore statoverrideneznámy parameter „%s“neznámy spôsob kompresieneznámy typ kompresie „%s“!neznámy typ kompresie „%s“!neznáma vynucovacia/odmietacia voľba „%.*s“neznáma voľba „%s“neznáma voľba -%cneznáma voľba --%sneznámy cieľový stav na riadku %d: %.250srozbalený ale nenakonfigurovanýnepodporované voľby kompresienepodporované voľby v hlavičke súboranepodporovaný typ kontroly integrityadresár s aktualizáciami obsahuje súbor „%.250s“, ktorého názov je príliš dlhý (dĺžka=%d, max=%d)adresár s aktualizáciami obsahuje súbory s názvami rozličnej dĺžky (oba %d a %d)používateľom definované meno poľa „%.*s“ je príliš krátkeverifikácia balíka %s zlyhala!verifikácia balíka %s zlyhala, ale napriek tomu sa inštaluje ako ste žiadali<žiadna>verzia %.250s z %.250s je uz nainštalovaná, preskakuje sačíslo verzie nezačína číslicoureťazec verzie obsahuje vložené medzeryprázdny reťazec verziečakanie na podproces %s zlyhaloupozorneniepočas čítania %s: %spri odstraňovaní %.250s, adresár „%.250s“ nebol prázdny a teda nebol odstránenýpočas odstraňovania %.250s, nebolo možné odstrániť adresár „%.250s“: %s - nie je adresár koreňom pripojeného systému súborov?Nebude sa inštalovať staršia verziu balíka %.250s z verzie %.250s na %.250s, preskakuje saáno, odkonfiguruje sa %s (pokazený balíkom %s)áno, odstráni sa %s v prospech %smusíte označiť balíky ich vlastnými názvami, nie citovaním názvov súborov z ktorých pochádzajú
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/stamp-po dpkg-1.20.7.1/po/stamp-po
--- dpkg-1.20.7.1-orig/po/stamp-po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/stamp-po	2021-06-09 18:25:16.208505342 -0500
@@ -0,0 +1 @@
+timestamp
diff -Naurp dpkg-1.20.7.1-orig/po/sv.gmo dpkg-1.20.7.1/po/sv.gmo
--- dpkg-1.20.7.1-orig/po/sv.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/sv.gmo	2021-06-09 18:25:15.877504837 -0500
@@ -0,0 +1,695 @@
+������:�N?�Na�Nk;O��O�oP&�P=Q&UQ|Q-�R.�R�R.�R-S IS4jS�S5�S-�S.T0NT1T$�T4�T/U;UqSU(�U$�UV3V:SV6�V1�V1�V!)W2KW(~W�W�W�W.�WXS'X{X�X�X9�Xm�X)kY:�Y9�Y.
+Z'9Z&aZ�Z3�Z5�Z[[v[[�[U�[D\Y\j\w\�\Z�\�\]�]=�] ^5^F^�U^=1`Ro`1�`D�`L9aA�a'�a&�a(b'@b+hb4�b!�b,�b9c-Rc�c#�c�c$�cd"#dFd!dd#�d�d�d�d�d�d"e2>e1qe/�e�e.�ef-4fRbfH�fQ�fAPge�gf�gI_h7�h<�hi(1iBZi�i�i�i
�i �ij5*j1`j0�j�j�j#�j!k4kQkKnk7�k5�k-(lVl!pl�l'�l-�l-m 0m5Qm�m �m�m$�m,n.2n.an�nH�n6�n(0o>Yo$�o �o�o�opp�(p�p#�p:q-=rkr|r�r�r*�r<�r#s-8s-fs��s)t6t�Mt[Cu��ug�y
{|(}(A}-j}�}8�}<�}.*~Y~0p~3�~1�~/�;1�*"�JM�2���ˀ&p�2��EʂV�g�5��.��-�+�/?�
o�%}�/��*ӄ&��!%�]G���!��M̅�20��c���"��ʉ4�.�5M�3����GǊ8�,H�u�(����ԋ��3��)-�$W�:|�,��V� ;�\�*x�����&ȍ3�-#�+Q�,}�	����ʎ*�
�#� @�Ha���������g5�j������4��5��������u[�&іA��{:�!��,ؗ*�.0�_��~��� ��5��ݚ ��,�$B�.g�>��*՛;�,<��i�$�u,����"{�������9Þ(��X&�3�?��8�2,�1_�,��:��4��5.�4d�A��Mۡ-)�W�k�#����Ƣۢ� �1'�8Y�?��Bң6�L�&h�.��!��!�5�8�U�k�������	��9ƥ.�#/�,S�����%���%�-*�1X�����)��1�:�?V�&����=ڨ7�P�!j�.��*��#�"
+�&-�0T�����@��+��;$�3`�����A̫�&-�-T�0��;��0�( �?I�)��-��"��4�EO���,��"ݮ!�"�5A� w�8��ѯ�-��5-�,c�B��BӰ+�GB�$�� ��:б;�G�`�&o���7���D�cM���2��*�"�3>�:r�-��&۴��4�J�"f�����(��=ϵ*
�J8���"����ж�-�5�)F�%p�������ط�����)#�M�l�!��!��#ϸ�%�%6�'\�,����ʹ�*�'1�'Y���!���� պ-��#$�#H�+l�%��$��� �� �9�L�"b�:����Fڼ!�=�Z�$w�����ͽ�#��!�9�!Y�"{�:��پ5�� .�2O���%����0׿*�$3�/X���6��V��"%�(H�q�<��.��)��(�*@�+k���,��)��4
+�3?�2s�4��;��<�6T�:��7��@��0?�;p�?��$��A�=S�$��0��!��	�b$���c��	�:'�<b�=��_��H=���������)��)�$6��[�\��&<�&c�'�� ��7��t�2��-��'��4	�.>�)m�G��-��
�	$�k.�/����>��%�$D�#i�&��!����!��"�^:�@����%��+�7;�!s������������O!�8q�*���������3�G�_�7z�5����|��
+{���m��0�GE���)��!�����5,�b�y�"��4����!�C%�=i�%��
�� ��(��%�%B�7h���I��G�PJ�G��.��?�#R�7v�#��+��2��Y1�f��L��M?�&��K��3�=4�r���=����4�F6�1}�;��&���1�P�%j�.��.��a��eP� ����D��)�H�_�&r�-��7�����
�.+�Z�c�|�"��������)��$�&A�"h�"��"����6��!�@�7R�B��H��&�0=�n�6����$��4��(�OD�
+��
+����
+��%����%�*:�e�
l�z�+��7��+��!�$A�4f�F��@��6#�1Z���,��R��'&�$N�	s�Z}�4��2
�'@�h�.��D��G��Y@�Q��^��%K�+q�2��%��%��1�+N�Nz���!��3�*9�d�5~���"��$��2�+J�+v�,������"�$'�L�!f�*����*��0��0+�&\�3��4��5��)"�,L�y�D��*��4��0�H�f�&�#��#��%��(�.=�9l�'��*��.��(�!E�g�(}�(��4��4�[9�,��4��#��,�"H�"k�/��/��+��+�-F�*t�&��!�����"� :�2[�0��&��B��#)�.M�|����� ��1��#�7�!Q�3s���*�����6#�&Z� ��.����4��1�+P�|���"������"�3�G�Z�!n�(������:��"/#RSvM�E(^(�*�.�0
+";I^�4�(�"8Pc��B�`�9B'|#�`��)M�n�kl���)4	C^	&�	
+�	2�
+2:2L$�9��5/S4�=�=�/4
@d
:�
�
x1y+�!�"�KEh;�<�''@O1�!�'�
-
+HMS�"��A�08�B�=,7j4�)�9;P����H9T���
)a7����8� ����U�f8=�B�H >i?�>�?'>g:�D�-&DTK�>�$>^ y����
+*HYj*|*�H�C 5_ � >� � -![.!Q�!a�!F>"c�"v�"J`#@�#@�#-$.A$7p$�$�$�$�$�$%57%:m%3�%�%�%+&$=& b&!�&M�&>�&92'0l'�'�'�')�'+(.I(x(2�(�(�()#))>) h)$�)$�)C�):*)R*@|*!�*1�*+,+3+;+�X+,.,<@,*}-�-
�-
�-�-+�-B.-U.1�.5�.��.
+�/�/�/X�0�1b�4&/6V7r8'�83�8�8;9>>9-}9�90�9/�9=#:
a:o:�:��:/�;�;H�;4<�S<'$>8L>[�>M�>/?2H?6{?5�?%�?#@2@#D@.h@/�@.�@�@bAyA*~AO�A�A<B�MB�D#�E"�E.�E%F1CF-uF�F?�FD�F(;GdG0�G�G�G!�G	�G3�G%0H$VH2{H-�HI�H$&I KI&lI�I�I#�I9�I5J0LJ#}J�J�J�J$�JK$KDK9dK�K��K�gLYM\oM��M��N#~O+�O��O��P�\Q�R/�RI�R�S!�S1�S(�S+T-T�MT��U$�V7�V�V"�V6W+OW?{WE�W3XK5X/�X��X]Y�eY��Y-�Z[[[]([(�[b�[F\HY\F�\<�\?&])f]9�]9�]>^<C^;�^]�^5_P_!j_'�_#�_�_�_�_!�_:`8L`;�`I�`8aDa%aa/�a'�a�a9�a!5bWbkb�b�b�b�bD�b4c$Nc7sc�c(�c2�c($d4Md7�d6�d�d!e41e<feA�eF�e+,f#Xf>|fA�f�f.g0Jg*{g0�g%�g)�g1'hYhthM�h1�hIi?Xi �i%�iU�i!5j2WjF�j:�jIk4Vk,�kN�k6l9>l,xl!�l<�lLmQm1om4�m/�m/n=6n'tnQ�n*�no/6o5fo'�oF�oRp5^pP�p%�pq9)q>cq�q�q1�q�qFr"`rN�r`�r3s/;s'ks�s3�s<�s1$t)Vt�t�t�t �t'�tu9u+?uLku1�uJ�u5v*Lvwv�v"�v6�vw.w%>wdwjw"�w�w�w�w�w.x%4x$Zx&x+�x+�x#�x/"y;Ry,�y/�y�y#z#%z0Iz+zz+�z�z)�z#{$;{;`{2�{5�{B|5H|;~|�|3�|	}#}=}'Y}I�}�}U�}%A~g~+�~+�~�~�~"
03K )�)�"�@�"X�={�"��4܀�&(�!O�;q�2��1��8�K�Hb�b��2�(A�j�9��=��,��''�3O�*��+��,ڄ)�?1�Aq�4��9�I"�Ml�6��?�<1�Bn�2��>�D#�%h�B��Bш#�=8�(v���U��*�c=���9��;��@7�_x�H؋!�A�`�{�$��$��%ڌ��Q��/�*�$@�e�?��{Ŏ3A�8u�%��3ԏ/�08�Wi�8�����x�;��ԑA�!)�"K�!n�*��!��ݒ"��#�lC�B���&�,*�<W�%����ؔ ��/�L�V[�D��0��(�G�V�
+_�Cj���$˖D�A5�!w����
+?�J��j�0��I+�#u�*��$ę �
+�:*�e�}�!��A��"�1$�SV�<��0��1'�9Y���&��4ٜ�F�Lf�V��U
+�9`�P��%�;�!M�'o�5��f͟x4�H��W��/N�O~�3ΡD�!G�i�=��Ǣ2עQ
+�;\�K��%�#
+�.�N�n�,��5��q�qa�&ӥ	��D�I�f�
z�&��)��?٦	�
+#�+.�.Z�	��*��"��5��,�=�.P��/��Ǩ� �&�><�#{���E��>��K:�.��8���8	�B�K�5k�"��Yī�	&�)0�Z�$c���#��.̬��
��&�MF�#����,խL�GO�?��;׮H�\�3u�O��*��$�D�]L�6��:�,�I�5e�I��S�c9�W��^��%T�.z�4��,޳+�47�Kl�K���%"�@H�2����5ֵ� (�"I�1l�3��.Ҷ,�.�M�f�(��$��)Ϸ1��!+�7M�3��2��+�F�>_�@��,߹5�B�YV�:��?�+� F�g�&��$��#л+��* �<K�B��&˼(�5�!Q� s���9��-�4�4I�r~�2�8$�&]�>��#ÿ#�2�7>�/v�:��3��2�.H�-w�$��(��!��(�B>�C��.��N��,C�@p�&��&��"��'"�6J�����&��<��0�1K�}���,����"��*�J�+c�'��#������"
�0�N�'k�������*��(���';�>c�1��&��^��OZ�C��.��9�>W�0��9��'�N)�x�8��)��(��� #�*D�o�w�M��i��FF�3��/��\��P�S���j�q������>�y��E~��c��F7r68��g��	j��o��\I$iT���:Ju!�0F���s�znM	B�#��h�V�N*�� )����������w�������N��Ur�7��z���:d�R�;6^S0�xL{������1�����
��I�x�w����������b%v�W����t�$��8�O;u�/{=0���X��5p�Cw�B\��������d8&�m��_}-���tF*���-5yrU_C.P.���#k$v�c��QM��{ ��=l;;2^����l/HgCR��	�+�����1�W��3����'j������k+_���S�){�]��<�f��T��?�(BK��A���6�y��1��`�(�L+
+N|����sI	%(T��:z�b��g�DU�/�����z�q9��'�o�R����E%�`'�C�d���"
+:����"c��V�p>��
+DaPum���@��A�]W�g�Y,��������O������,a)�E�sY�!L�7MN�x�����h��Zj�}��w>L&�"c�9JR�ZiXf�M��*��`�����Of�27�1t9,���P�e�%��\�4*�-rZ
+Gx�K�����H��)a(}�^9�Be��o�!����pQ�3v�_h�5-X8�����F�![2�^|s�WQZ��mhn?�K�k=���~�~H�[��l�q�<
k�3�?&�G�[ea�b�V`@�#��@vo���S����0��=.�Ib�G���n����Y������J~ dl��4���>$����\����5[���n.����/V�EH�i4|,f�}�TQ�G��D�&���@�t<��U����K�p Ae���iY]��qm����#A
�y����?�
D<�X|4'��"O��6�]�3+���J�u��2
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s suggests %s%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one package name argument--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMore than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenVersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open security status notification channelcannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentgenerated corrupt ar header for '%s'header is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file or streamunexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion number does not start with digitversion string has embedded spacesversion string is emptyversioned Provideswait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.23
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:52+0200
+Last-Translator: Peter Krefting <peter@softwolves.pp.se>
+Language-Team: Svenska <debian-l10n-swedish@lists.debian.org>
+Language: sv
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+
+ paketens förestående utlösare som är eller kanske inte kan analyseras:
+
+Konfigurationsfilen "%s" existerar inte på ditt system.
+Installerar ny konfigurationsfil enligt önskemål.
+
+Felsökningsflaggor kombineras med bitvis eller.
+Notera att betydelser och värden kan komma att ändras.
+
+Använd "dpkg" för att installera och ta bort paket från ditt system, eller
+"apt" eller "aptitude" för användarvänlig pakethantering.  Paket
+som packas upp med "dpkg-deb --extract" blir inte korrekt installerade!
+
+VARNING - flaggor markerade [!] kan tillfoga stor skada till din installation.
+Tvingande flaggor markerade [*] är förvalda.
+     Ej modifierad sedan installationen.
+     Versionen i paketet är samma som vid senaste installationen.
+     inte en vanlig fil        %.255s
+   Vad vill du göra åt det?  Dina möjligheter är:
+   Y eller I: installera paketansvariges version
+   N eller O: behåll din nu installerade version
+      D     : visa skillnaderna mellan versionerna
+      Z     : starta ett skal för att undersöka situationen
+  %.250s (version %.250s) är närvarande och %s.
+  %.250s (version %.250s) kommer att installeras.
+  %.250s är %s.
+  %.250s är installerad, men är version %.250s.
+  %.250s är inte installerad.
+  %.250s kommer att avkonfigureras.
+  %.250s kommer att installeras, men är version %.250s.
+  %.250s kommer att tas bort.
+  %.250s är uppackad, men har aldrig konfigurerats.
+  %.250s är uppackad, men är version %.250s.
+  senast konfigurerad version av %.250s är %.250s.
+  %.250s tillhandahåller %.250s och är närvarande och %s.
+  %.250s tillhandahåller %.250s och kommer att installeras.
+%.250s tillhandahåller %.250s men men är %s.
+  %.250s tillhandahåller %.250s men kommer att avkonfigureras.
+  %.250s tillhandahåller %.250s men kommer att tas bort.
+  %s (%s) tillhandahåller %s.
+  -?|--help                        Visa detta hjälpmeddelande.
+     --version                     Visa versionsnummer.
+  Paketet %s väntar på hantering av utlösare.
+  Paketet %s har inte konfigurerats ännu.
+  Paketet %s är ej installerat.
+  Paketet %s kommer att tas bort.
+  Paketet %s, som tillhandahåller %s, väntar på hantering av utlösare.
+  Paketet %s, som tillhandahåller %s, har inte konfigurerats ännu.
+  Paketet %s, som tillhandahåller %s, är ej installerat.
+  Paketet %s, som tillhandahåller %s, kommer att tas bort.
+  Versionen av %s på systemet är %s.
+  Versionen av %s på systemet, tillhandahållen av %s, är %s.
+  Versionen av %s som skall konfigureras är %s.
+  länken saknas för närvarande  länken pekar för närvarande på %s  slav %s: %s %7jd byte, %5d rader   %c  %-20.127s %.127s
+ %d i %s:  %d paket, från följande avdelning: %d paket, från följande avdelningar: %s (%jd byte)
+ %s (%s) förstör %s och är %s.
+ %s (inte en vanlig fil)
+ ==> Borttagen (av dig eller en skriptfil) sedan installationen.
+ ==> Den fil som nu finns skapades av dig eller ett skript.
+ ==> Paketansvariges version finns även i paketet du installerar.
+ ==> Behåller gammal konfigurationsfil enligt förval.
+ ==> Modifierad (av dig eller en skriptfil) sedan installationen.
+ ==> Paketdistributören har uppdaterat konfigurationsfilen.
+ ==> Använder nuvarande gammal fil enligt önskemål.
+ ==> Använder ny konfigurationsfil enligt förval.
+ ==> Använder ny fil enligt önskemål.
+ Paketet %s: del(ar) Förvald åtgärd är att installera den nya versionen.
+ Förvald åtgärd är att behålla din nuvarande version.
+ och  är beroende av %d förväntat program hittades inte i PATH eller är inte exekverbart
+%s%d förväntade program hittades inte i PATH eller är inte exekverbara
+%s%d fil och katalog installerad.)
+%d filer och kataloger installerade.)
+%d efterfrågad kontrollkomponent saknas%d efterfrågade kontrollkomponenter saknas%s (underprocess): %s
+%s - prioritet %d%s förstör %s%s är i konflikt med %s%s trasig: %s%s felsökningsval, --debug=<oktalt> eller -D<oktalt>:
+
+    Tal   Ref. i källkod    Beskrivning
+%s är beroende av %s%s förbättrar %s%s tvingande flaggor - bestämmer vad som händer vid fel:
+  varna men fortsätt: --force-<sak>,<sak>,...
+  stanna med fel:     --refuse-<sak>,<sak>,... | --no-force-<sak>,<sak>,...
+ Tvinga saker:
+%s är ej korrekt installerat - ignorerar dess beroenden%s är i förväg beroende av %s%s rekommenderar %s%s föreslår %s%s:
+    Formatversion för del:          %d.%d
+    Del av paket:                   %s
+       ... version:                 %s
+        ...arloteltir:              %s
+       ... MD5-kontrollsumma:       %s
+       ... längd:                   %jd byte
+       ... dela vid:                %jd byte
+    Delnummer:                      %d/%d
+    Dellängd:                       %jd byte
+    Deloffset:                      %jd byte
+    Delfilstorlek (använd del):     %jd byte
+
+%s: konfigurationfilen "%.250s" är inte en vanlig fil eller symbolisk länk (= "%s")%s: konfigurationsfilen "%.250s" blir ett degenererat filnamn
+ ("%s" är en symbolisk länk till "%s")%s: konfigurationsfilen "%s" är en cirkulär länk
+ (= "%s")%s: beroendeproblem, men konfigurerar ändå enligt önskemål:
+%s%s: beroendeproblem, men hanterar ändå utlösare enligt önskemål:
+%s%s: beroendeproblem, men tar bort ändå enligt önskemål:
+%s%s: ett fel uppstod då indata skulle kopplas till bzip2-ström%s: ett fel uppstod då indata skulle kopplas till gzip-ström%s: ett fel uppstod då utdata skulle kopplas till bzip2-ström%s: ett fel uppstod då utdata skulle kopplas till gzip-ström%s: misslyckades med att länka "%.250s" till "%.250s": %s%s: misslyckades med att ta bort "%.250s" (före överskrivning): %s%s: misslyckades med att ta bort "%.250s": %s%s: misslyckades med att ta bort gammal säkerhetskopia "%.250s": %s%s: misslyckades med att ta bort tidigare distribuerad version "%.250s": %s%s: misslyckades med att namnändra "%.250s" till "%.250s": %s%s: internt bzip2-läsfel%s: internt bzip2-läsfel: "%s"%s: internt bzip2-skrivfel%s: internt bzip2-skrivfel: "%s"%s: internt gzip-läsfel%s: internt gzip-läsfel: "%s"%s: internt gzip-skrivfel%s: internt gzip-skrivfel: %s%s: internt gzip-skrivfel: "%s"%s: fel vid stängning (lzma)%s: lzma-fel: %s%s: lzma-läsfel%s: lzma-skrivfel%s: vidareförmedlat fel vid kopiering: %s%s: kunde inte öppna %s för hashning: %s%s: kunde inte läsa länken till konfigurationsfilen "%s"
+ (= "%s"): %s%s: kunde inte ta status på konfigurationsfilen "%s"
+ (= "%s"): %s"%.255s" innehåller ingen kontrollkomponent "%.255s""%s" krockar med "%s""%s" innehåller användardefinierat värde för Priority "%s""%s" tar inget värde"%s"-fältet: ogiltigt paketnamn "%.255s": %s"%s"-fältet: saknat arkitekturnamn, eller skräptecken där arkitekturnamnet förväntades"%s"-fältet: saknat paketnamn, eller skräptecken där paketnamnet förväntades"%s"-fältet: referens till "%.255s":
+ "%c" är föråldrat, använd "%c=" eller "%c%c" istället"%s"-fältet: referens till "%.255s":
+ felaktigt versionsberoende %c%c"%s"-fältet: referens till "%.255s":
+ implicit exakt träff på versionsnummer, använd hellre "=""%s"-fältet: referens till "%.255s":
+ versionsvärdet börjar med icke-alfanumeriskt tecken, lägg till ett blanksteg"%s"-fältet, referens till "%.255s": ogiltigt arkitekturnamn "%.255s": %s"%s"-fältet: referens till "%.255s": versionsnumret ej avslutat"%s"-fältet: syntaktiskt fel efter referens till paket "%.255s""%s" tar ett värde"%s" finns ej i PATH eller är inte exekverbar(Noterar att %s försvunnit, vilken helt har ersatts.)
+(Läser databasen ... (beskrivning saknas)(totalt %jd byte)
+, minnesutskrift skapadflaggan -%c tar inget värdeflaggan -%c tar ett värde--%s --pending tar inga argument som inte är flaggor--%s --recursive kräver åtminstone ett sökvägsargument--%s behöver .deb-filnamn och katalog som argument--%s behöver <namn>--%s behöver <namn> <sökväg>--%s behöver ett .deb-filnamn som argument--%s behöver ett <katalog>-argument--%s behöver ett <fil>-argument--%s behöver ett ensamt argument--%s behöver en målkatalog.
+Kanske är det dpkg --install du vill använda?--%s behöver ett giltigt paketnamn. "%.250s" är inte det; %s--%s kräver åtminstone ett argument som är en paketfil--%s behöver åtminstone ett paket som argument--%s behöver fyra argumentflaggan --%s tar inget värdeflaggan --%s tar ett värde--%s kräver ett positivt oktalt argument--%s kräver en eller flera delfilsargument--%s tar som mest en Packages-fil som argument--%s tar högst två argument--%s tar som mest två argument (.deb och katalog)--%s tar exakt ett argument--%s tar exakt två argument--%s tar inget argument--%s tar ett paketnamn som argument--%s tar bara ett argument (.deb-filnamn)--auto tar exakt ett filargument--auto kräver att --output används--compare-versions: ogiltig relation--compare-versions tar tre argument: <version> <relation> <version>--search behöver åtminstone ett filnamnsmönsterargument--split kräver ett källfilnamnsargument--split tar som mest ett källfilnamn och ett destinationsprefix--update angavs men %s finns inte--update är oanvändbar tillsammans med --remove... det verkar ha fungerat.../%s, men:
+<komprimerare> från tar -cf<deb> är filnamnet på ett arkiv i Debianformat.
+<kfil> är namnet på en administrativ filkomponent.
+<kfält> är namnet på ett fält i den huvud-"control"-filen.
+
+<dekomprimering><länk> och <sökväg> kan inte vara identiska<länk> är länken som pekar till %s/<namn>.
+  (t.ex. /usr/bin/pager)
+<namn> är huvudnamnet för länkgruppen.
+  (t.ex. pager)
+<sökväg> är platsen för en av de alternativa målfilerna.
+  (t.ex. /usr/bin/less)
+<prioritet> är ett heltal; alternativ med högre värde har högre
+  prioritet i automatiskt läge.
+<filhandtag för paketstatus och förlopp><standard fel><standard in><standard ut>Lägger till "%s"
+Tillåt installera paket som är i konfliktAlternativet %s oändrat eftersom valet %s inte är tillgängligt.Installera alltid saknade konfigurationsfilerAnvänd alltid nya konfigurationsfiler, fråga ejAnvänd alltid gamla konfigurationsfiler, fråga ejEn annan process har låst databasen för skrivning, och kanske ändrar den
+just nu, en del av de problem som följer kan komma på grund av detta.
+ArkitekturAutentiserar %s ...
+Kommandon:
+  --add <ägare> <grupp> <läge> <sökväg>
+                           lägg till en ny sökvägspost i databasen.
+  --remove <sökväg>        ta bort sökväg från databasen.
+  --list [<jokertecken>]   visa befintliga överskrivningar i databasen.
+
+Kommandon:
+  --check-supported                Se om den aktiva dpkg stöder utlösare.
+
+Kommandon:
+  --install <länk> <namn> <sökväg> <prioritet>
+    [--slave <länk> <namn> <sökväg>] ...
+                           lägg till en alternativgrupp till systemet.
+  --remove <namn> <sökväg> ta bort <sökväg> från alternativgruppen <namn>.
+  --remove-all <namn>      ta bort gruppen <namn> från alternativsystemet.
+  --auto <namn>            växla huvudlänken <namn> till automatiskt läge.
+  --display <namn>         visa information om gruppen <namn>.
+  --list <namn>            visa alla mål för gruppen <namn>.
+  --get-selections         visar huvudalternativnamn och deras status.
+  --set-selections         läser alternativstatus från standard in.
+  --config <namn>          visa alternativ för gruppen <namn> och be
+                           användaren välja vilken som skall användas.
+  --set <namn> <sökväg>    lägg till <sökväg> som alternativ för <namn>.
+  --all                    anropa --config på samtliga alternativ.
+
+Kommandon:
+  -s|--split <fil> [<prefix>]      Dela ett arkiv.
+  -j|--join <del> <del> ...        Slå ihop delar.
+  -I|--info <del> ...              Visa information om en del.
+  -a|--auto -o <komplett> <del>    Samla delar automatiskt.
+  -l|--listq                       Lista omatchade delar.
+  -d|--discard [<filnamn> ...]     Kasta omatchade delar.
+
+Kommandon:
+  [--add] <fil>            lägg till en omdirigering.
+  --remove <fil>           ta bort omdirigeringen.
+  --list [<jokertecken>]   visa omdirigerade filer.
+  --listpackage <fil>      visa vilket paket som omdirigerar filen.
+  --truename <fil>         visa den omdirigerade filen.
+
+Jämförelseoperatorer för --compare-versions är:
+ lt le eq ne ge gt       (tom version anses lägre än alla andra versioner)
+ lt-nl le-nl ge-nl gt-nl (tom version anses högre än alla andra versioner)
+ < << <= = >= >> >       (endast för kompatibilitet med kontrollfilssyntax)
+Konfigurationsfil "%s"
+Konfigurationsfil "%s" (faktiskt "%s")
+Konfigurera godtyckligt paket som kan hjälpa dettaAvkonfigurerar %s (%s) ...
+Avkonfigurerar %s (%s), så att vi kan ta bort %s (%s) ...
+Debian "%s" pakethanteringsprogram, frågeverktyg version %s.
+Debian "%s" paketutlösarverktyg version %s.
+Debian %s version %s.
+Debian "%s" paketarkiveringsprogram version %s.
+Debian "%s" pakethanteringsprogram version %s.
+Debian "%s" verktyg för delning/sammanslagning, version %s.
+Tog bort %s.
+Beroenden och konflikterBeskrivningÖnskat=Okänd(U)/Installera(I)/Radera(R)/Rensa(P)/Håll(H)
+| Status.=Ej inst.(N)/(I)nst./Konffil.(C)/(U)ppack./Halvkonf.(F)/(H)alvinst.
+| /       Vänt.utl(W)/Föresl.utl(T)
+|/ Fel?Inget(=)/Ominstallera(R)/Båda(X) (Status,Fel: versaler=illa)
+Utför ej säkra I/O-operationer vid uppackningFel uppstod vid hantering:
+Felstatus:
+  0 = OK
+  1 = med --auto, fil är inte en del
+  2 = problem
+Filen "%.250s" är inte del av ett flerdelat arkiv.
+Formatsyntax:
+  Ett format är en sträng som kommer skrivas ut för varje paket. Formatet
+  kan innehålla de vanliga teckensekvenserna \n (ny rad), \r (vagnretur)
+  eller \\ (vanligt omvänt snedstreck). Paketinformation kan läggas in genom
+  att lägga in variabelreferenser till paketfält genom att använda syntaxen
+  ${var[;bredd]}. Fälten kommer att högerjusteras såvida inte bredden anges
+  negativt, i vilket fall vänsterjustering kommer användas.
+Allmänt hjälpsam förloppsinformationIgnorerar begäran att ta bort delad omdirigering "%s".
+Ignorerar begäran att byta namn på filen "%s" som ägs av det omdirigerande paketet "%s"
+Information om %d paket uppdaterades.
+Information om %d paket uppdaterades.
+Knäppa mängder pladderInstallera paket även om autentisering misslyckasInstallera även om ett annat paket skulle gå sönderInstallerar ny version av konfigurationsfilen %s ...
+Anrop och status för utvecklarskriptSkräpfiler kvar i depåkatalogen:
+Låter "%s" vara
+Massvis av beroende-/konfliktutdataMassvis av pladder om bl.a dpkg/info-katalogenMassvis med utdata för varje konfigurationsfilMassvis med utdata för varje fil som hanterasMassvis med utdata om utlösareMer än en kopia av paketet %s har packats upp
+ under körningen! Konfigurerar det bara en gång.
+NamnIngen omdirigering "%s", ingen borttagen.
+Obs! roots PATH bör vanligtvis innehålla /usr/local/sbin, /usr/sbin och /sbinInget att konfigurera.Erbjud ersätta konfigurationsfiler som saknar nya versionerFlaggor:
+  --admindir=<katalog>             Använd <katalog> istället för %s.
+  --by-package=<paket>             Överstyr den avvaktande utlösaren (sätts
+                                   normalt av dpkg).
+  --await                          Paketet måste vänta på hanteringen.
+  --no-await                       Inga paket behöver vänta på hanteringen.
+  --no-act                         Bara testa - ändra ingenting på riktigt.
+
+Flaggor:
+  --depotdir <katalog>             Använd <katalog> istället för %s/%s.
+  -S|--partsize <storlek>          I kibyte, för -s (förval är 450).
+  -o|--output <fil>                Filnamn, för -j (förval är
+                                     <paket>_<version>_<ark>.deb)
+  -Q|--npquiet                     Var tyst när -a inte är en del.
+  --msdos                          Skapa 8.3-filnamn.
+
+Utdata för varje konfigurationsfilUtdata för varje fil som hanterasSkriv över omdirigerad fil med ej omdirigeradSkriv över pakets fil med ett annatsSkriv över ett pakets katalog med ett annats filPATH saknar viktiga program, problem trolligaPATH är inte sattPaketet %s kvarhålles, rör det inte. --force-hold ignorerar.
+Paketet %s är listat mer än en gång, hanterar det bara en gång.
+Paketet "%s" innehåller inga filer (!)
+Paket ännu ej återskapade:
+Del %d av paket %s sparad (behöver fortfarande Sökväg"Pre-Depends"-fältFörbereder att packa upp %s ...
+PrioritetHantera även paket med fel eller saknad arkitekturHantera även paket med fel versionerHanterar utlösare för %s (%s) ...
+Hanteringen avbröts då för många fel uppstod.
+Raderar konfigurationsfiler för %s (%s) ...
+Slår ihop paketet %s från %d del:Slår ihop paketet %s från %d delar:Lagrade information om %s från %s.
+Ta bort ett systemkritiskt paketTa bort paket som kräver installationTar bort %s (%s) ...
+Tar bort "%s"
+Ersätt paket med en lägre versionErsätta av filer i det installerade paketet %s (%s) ...
+Ersätter information om tillgängliga paket med %s.
+Ersätter filer i det gamla paketet %s (%s) ...
+Väljer tidigare ej valt paket %s.
+ValAktivera alla tvingande flaggorStäller in %s (%s) ...
+Knäppa mängder utdata om utlösareHoppar över trasig rad: %sHoppar över okänt alternativ "%s".Hoppar över ej valt paket %s.
+Delar paketet %s i %d del: Delar paketet %s i %d delar: StatusFöljande paket avvaktar hantering av utlösare de aktiverat i andra
+paket. Hantering kan efterfrågas genom att använda dselect eller
+dpkg --configure --pending (eller dpkg --triggers-only):
+Följande paket är i oordning på grund av allvarliga problem när de
+installerades. De måste ominstalleras om de (och paket som är
+beroende av dem) ska fungera korrekt:
+Följande paket saknar list-kontrollfilen i databasen, de
+behöver installeras på nytt:
+Följande paket saknar md5sums-kontrollfilen i databasen, de
+behöver installeras på nytt:
+Följande paket är bara delvis konfigurerade, troligtvis på grund av problem
+vid deras första konfiguration. Nytt konfigurationsförsök bör göras med
+dpkg --configure <paket> eller menyvalet "configure" i dselect:
+Följande paket är bara delvis konfigurerade, på grund av problem under
+installationen. Installationen kan troligtvis genomföras genom att försöka
+igen. Paketen kan tas bort via dselect eller dpkg --remove:
+Följande paket saknar arkitektur:
+Följande paket har en ogiltig arkitektur:
+Följande paket har en okänd oegen arkitektur, vilket kommer skapa
+beroendeproblem i pakethanterarskal. Detta kan rättas genom att registrera
+den oegna arkitekturen med dpkg --add-architecture:
+Följande paket har utlösts, men hanteringen av utlösare är ännu inte
+utförd. Hantering kan efterfrågas genom att använda dselect eller
+dpkg --configure --pending (eller dpkg --triggers-only):
+Följande paket har packats upp men inte konfigurerats ännu. De måste
+konfigureras med dpkg --configure eller menyvalet "configure" i
+dselect för att de ska fungera:
+Det finns %d val för alternativet %s (som tillhandahåller %s).Det finns %d val för alternativet %s (som tillhandahåller %s).Det finns inga program som tillhandahåller %s.Det finns bara ett alternativ i länkgruppen %s (tillhandahåller %s): %sDetta är fri programvara; se GNU General Public License version 2
+eller senare för kopieringsvillkor. Det finns INGEN garanti.
+Utlösaraktivering och -hanteringFörsök (av)installera saker även som icke-rootGör alla beroendeproblem till varningarGör versionsberoendeproblem till varningarSkriv "exit" när du är klar.
+Skriv dpkg --help för hjälp om att installera och avinstallera paket [*];
+Använd "apt" eller "aptitude" för användarvänlig pakethantering;
+Skriv dpkg -Dhelp för en lista över värden för dpkgs felsökningsflagga;
+Skriv dpkg --force-help för en lista över tvingande flaggor;
+Skriv dpkg-deb --help för hjälp om manipulering av *.deb-filer;
+
+Flaggor markerade med [*] ger mycket utdata - kör genom "less" eller "more"!Skriv dpkg-deb --help för hjälp om att hantera *.deb-filer
+Skriv dpkg --help för hjälp om att installera och avinstallera paket.Skriv dpkg-split --help för hjälp.Skriv dpkg-trigger --help för hjälp om detta verktyg.Packar upp %s (%s) ...
+Packar upp %s (%s) över (%s) ...
+Uppdaterar information om tillgängliga paket med %s.
+Användning: %s [<flagga> ...] <kommando>
+
+Använd "%s --help" för hjälp om hur du använder programmet.Använd "apt" eller "aptitude" för användarvänlig pakethantering.
+Använd --help för hjälp om att omdirigera filer.Använd --help för hjälp om att överstyra "stat"-information för filer.Använd --help för hjälp om att fråga paket.Använd förval för nya konfigurationsfiler om sådant
+finns, fråga ej. Om inget förval finns tillfrågas du
+såvida inte flaggorna confold eller confnew också angivitVersionVersionen av dpkg med fungerande stöd för %s är ännu ej konfigurerad.
+ Använd "dpkg --configure dpkg" och försök sedan igen.
+När du lägger till är förval --local och --divert <original>.distrib.
+När du tar bort måste --package eller --local samt --divert stämma om de
+anges. Skripten preinst/postrm i paket skall alltid ange --package och --divert.
+Skulle ta bort eller helt radera %s (%s) ...
+[förval=N][förval=Y][inget förval]administrationskatalogen måste vara inuti dpkgs installationsktalog för att fungera korrektkonfigurerar även "%s" (krävs av "%s")alternativet för %s (ingår i länkgruppen %s) finns inte; tar bort från listan över alternativalternativet %s kan inte vara huvudalternativ: det är en slav till %salternativet %s kan inte vara en slav till %s: det är huvudalternativetalternativet %s kan inte vara en slav till %s: det är en slav till %salternativet %s för %s har inte registrerats; tar inte bortalternativet %s för %s har inte registrerats; ställer inte inalternativlänken %s hanteras redan av %salternativlänken %s hanteras redan av %s. (slav till %s)alternativlänken är inte absolut som den borde vara: %salternativnamnet (%s) får inte innehålla "/" eller blankstegalternativsökvägen är inte absolut som den borde vara: %stvetydigt paketnamn "%s" med mer än en installerad instansdet finns redan en överskrivning för "%s", men --force angavs, så den kommer att ignorerasdet finns redan en överskrivning för "%s", avbryteralla omdirigeringar av %salla omdirigeringar av %s till %sar-medlemmens namn "%s" är för långtar-medlemmens storlek %jd för stor<tom><ingen><okänd>arkitekturen "%s" är ogiltig: %sarkitekturen "%s" är reserverad och kan inte läggas tillarkivet "%.250s" innehåller två kontrolldelar, ger upparkivet "%s" har förtida medlem "%.*s" före "%s", ger upparkivet "%s" använder okänd komprimering för medlemmen "%.*s", ger upparkivet innehåller objektet "%.255s" av okänd typ 0x%xstorlek på arkivkontrolldelarkivet har ogiltig formatversion: %sarkivet har felformaterad kontroldellängd "%s"arkivet har inga nyradstecken i huvudethuvud för arkivinformationarkivet är formatversion %d.%d; hämta en nyare dpkg-debmagiskt versionsnummer för arkivhuvud för arkivdeldelnummer för arkivoffset för arkivdeldelnummer för arkivtotalstorlek för arkivautomatiskt lägeautomatiska uppdateringar av %s/%s är inaktiverad; låter den vara.avvaktar hantering av utlösare för ett annat pakettomrad i värdet för fältet "%.*s"trasigt p.g.a misslyckad borttagning eller installationtrasigt p.g.a fel i postinstkan inte installera det okända valet %skan inte minnesmappa paketinformationsfil "%.255s"kunde inte ta bort gammalt postrm-skriptkan inte ta status på paketinformationsfil "%.255s"kan inte lägga till ar-medlemsfilen (%s) till "%s": %skan inte lägga till delad paketdel "%s" till "%s": %skunde inte lägga till i "%s"kan inte stänga uppackarens rörkan inte beräkna MD5-hashvärde för filen "%s": %skan inte beräkna MD5-hashvärde för tar-filen "%.255s": %skan inte konvertera multibytesekvensen "%s" till ett brett teckenkan inte konvertera multibytesträngen "%s" till en bred-teckensträngkan inte kopiera "%s" in i arkivet "%s": %skan inte kopiera "%s" till "%s": %skan inte kopiera arkivdel från "%s" till uppackarens rör: %skan inte kopiera extraherade data för "%.255s" till "%.255s": %skan inte omdirigera katalogerKan inte omdirigera filen "%s" till sig självkan inte hämta ut styrfilen "%s" från "%s": %skan inte hämta ut delad paketdel "%s": %skan inte hämta handtag för säkerhetsetiketterkan inte öppna "%.255s" (i "%.255s")kan inte öppna arkivdelen i fil "%.250s"kan inte öppna säkerhetsstatusmeddelandekanalenkan inte läsa infokatalogkan inte ta bort "%.250s"kan inte ta bort arkitekturen "%s" som för närvarande används av databasenkan inte ta bort den icke oegna arkitekturen "%s"kan inte ta bort gammal kopia av konfigurationsfil "%.250s" (av "%.250s")kan inte ta bort gammal konfigurationsfil "%.250s" (= "%.250s")kan inte ta bort gammal fillistakan inte byta namn på "%s" till "%s"kan inte tillfredsställa i förvägberoende för %.250s (krävs på grund av %.250s)kan inte läsa katalogen "%.255s"kan inte genomsöka uppdateringskatalogen "%.255s"kan inte komma på hur i förväg-beroendet kan tillfredsställas:
+ %skan inte sätta säkerhetssammanhang för filobjektet "%s"kan inte sätta säkerhetsexekveringssammanhang för för utvecklarskriptkan inte hoppa över arkivkontrolldel från "%s": %skan inte hoppa över arkivdel från "%s": %skan inte hoppa över filen "%.255s" (ersatt eller utesluten?) från röret: %skan inte hoppa över vaddering för filen "%.255s": %skan inte hoppa över huvud för delat paket för "%s": %skan inte ta status på "%.255s" (i "%.255s")kan inte ta status på filen "%s"kan inte döda möjliga avslutande nollor från dpkg-deb: %stecknet "%c" ej tillåtet (endast tecken, siffror och tecknen "%s" tillåts)komprimerade data är trasigakonfigurationsfilen "%.250s" finns inte i paketetkunde inte ta status på konfigurationsfilen "%.50s"konfigurationsfilen "%s" är inte en vanlig filvisualiserare för konfigurationsfilsskillnaderkonfigurationsfilnamnet "%s" innehåller avslutande blankstegkonfigurationsfilnamnet "%s" dupliceratkonfigurationsfilnamnet "%s" är för långt eller saknar avslutande nyradsteckenskal för hantering av konfigurationsfilerkonfigureringsfel: %s:%d: %smotstridiga åtgärder %c (--%s) och -%c (--%s)motsägande omdirigeringar av "%.250s" eller "%.250s"paketkonflikt - installerar inte %.250sfunderar på att avkonfigurera %s, vilket skulle förstöras av %s ...funderar på att avkonfigurera det systemkritiska
+ paketet %s för att aktivera %sfunderar på att ta bort %s till förmån för %s ...kontrollkatalogen har felaktig behörighet %03lo (måste vara >=0755 och <=0775)kontrollkatalogen är inte en katalogkontrollfilen "%s" finns intestyrfilen "%s" för paketet "%s" innehåller tomt filnamnstyrfilen "%s" för paketet "%s" saknar avslutande radbrytningstyrfilen innehåller %ckontrolldeltrasig formatfil för informationsdatabasen: "%s"kunde inte öppna logg "%s": %skunde inte ta status på gammal fil "%.250s" så den tas inte bort: %skunde inte öppna "%i" för strömdet nuvarande alternativet %s är okänt, växlar till %s för länkgruppen %scykel upptäckt vid hantering av utlösare:
+ paketkedja vars utlösare är eller kan vara orsak:datadelberoendeproblem - lämnar utlösare obehandladeberoendeproblem - lämnar okonfigureradberoendeproblem - tar inte bortberoendeproblem förhindrar konfigurering av %s:
+%sberoendeproblem förhindrar hantering av utlösare av %s:
+%sberoendeproblem förhindrar borttagning av %s:
+%skastar bort föråldrad slavlänk %s (%s)omdirigering av %s från: %s
+omdirigering av %s till: %s
+omdirigering av %s av %somdirigering av %s till %s av %smålet kan inte innehålla nyradsteckenomdirigerat av %s till: %s
+klar
+nedgraderar %.250s från %.250s till %.250sdpkg finns inte listad som installerad, kan inte kontrollera stöd för %s!
+dubblerad väntad utlösare för paketet "%.255s"dubblerad filutlösarintresse för filnamnet "%.250s" och paketet "%.250s"duplicerad sökväg %sdubblerad förestående utlösare "%.255s"duplicerad slavlänk %sduplicerat slavnamn %sdubblerat värde för "%s"-fältetdubblerat värde för användardefinierat fält "%.*s"tomt fältnamntom sträng från fgets när conffiles lästestomma utlösarnamn är inte tillåtnaepochepoch i versionen är negativepoch i versionen är inte ett talepoch i versionen är för storfelfel vid kontroll av "%s"fel vid stängning av %.250sfel vid läsning av konfigurationsfil "%.250s"fel vid stängning/skrivning "%.255s"fel vid skapande av enheten "%.255s"fel vid skapande av katalogen "%.255s"fel vid skapande av hårda länken "%.255s"fel vid skapande av ny säkerhetskopia "%s"fel vid skapande av röret "%.255s"fel vid skapande av symboliska länken "%.255s"fel då det skulle säkerställas att "%.250s" ej existerarfel vid exekvering av kroken "%s", felkod %dfelaktig formateringssträng i varbuf-variablenfel i show-format: %sfel vid installation av ny fil "%s"fel vid öppning av filen conffilesfel vid öppning av konfigurationskatalogen "%s"fel vid hantering av arkivet %s (--%s):
+ %sfel vid hantering av paketet %s (--%s):
+ %sfel vid läsning av %.250sfel vid läsning av %s från filen %.255sfel vid läsning av filen conffilesfel vid läsning från dpkg-deb-rörfel vid läsning av fil för uppskjutna utlösare, "%.250s"fel vid borttagning av gammal säkerhetskopia "%s"fel när ägandeskap för "%.255s" skulle ställas infel vid inställning av ägandeskap av symboliska länken "%.255s"fel när behörighet för "%.255s" skulle ställas infel när tidsstämplingarna på "%.255s" skulle ställas infel vid öppning av %.250skunde inte stänga av hantering av signalen %s: %s
+fel vid skrivning av "%s"fel vid skrivning av "%s"fel vid skrivning till "%s"fel vid skrivning till arkitekturlistanfel vid skrivning till stderr, upptäcktes innan konfigurationsfilfråganmisslyckades att allokera minnemisslyckades med att allokera minne för ny post i listan över misslyckade paket: %skunde inte byta katalog till "%.255s"kunde inte byta till katalogenkunde inte byta filsystemsrot till "%.250s"kunde inte stänga efter läsning: "%.255s"kunde inte skapa katalogkunde inte skapa rörkunde inte duplicera filhandtag %dkunde inte duplicera std%skunde inte ta status (fstat) på del av ar-fil (%s)kunde inte ta status på arkivetkunde inte ta status på omdirigeringsfilkunde inte ta status på statoverride-filkunde inte skapa temporärfil (%s)kunde inte öppna konfigurationsfilen "%.255s" för läsning: %skunde inte öppna omdirigeringsfilkunde inte öppna paketinformationsfil "%.255s" för läsningkunde inte öppna statoverride-filkunde inte öppna utlösarintresselistfilen "%.250s"misslyckades att läsakunde inte läsa "%.255s" (i "%.255s")kunde inte läsa arkivet "%.255s"kunde inte ta bort den hanterade uppdateringsfilen "%.255s"kunde inte ta bort min egen uppdateringsfil %.255skunde inte gå till början av temporär fil (%s)kunde inte spola tillbaka utlösarintressefilen "%.250s"misslyckades att sökakunde inte ta status på (avreferera) befintlig symbolisk länk "%.250s"kunde inte ta status på (avreferera) föreslaget nytt mål "%.250s" för symbolisk länk "%.250s"kunde inte ta status (stat) på temporär fil (%s)kunde inte ta bort temporärfil (%s), %smisslyckades att skrivakunde inte skriva %s-databaspost om "%.50s" till "%.250s"misslyckades med att skriva detaljer om "%.50s" till "%.250s"kunde inte skriva filnamn till tar-rör (%s)fgets gav en tom sträng från "%.250s"fältnamnet "%.*s" kan inte inledas med bindestreckfältnamnet "%.*s" måste följas av kolonfältbredden är utanför tillåtet områdefilen "%.250s" har ogiltig formatversion: %sfilen "%.250s" är trasig - %.250s saknasfilen "%.250s" är trasig - felaktig MD5-kontrollsumma "%.250s"filen "%.250s" är trasig - felaktigt magiskt nummer i arkivhuvudfilen "%.250s" är trasig - felaktigt arkivdelnummerfilen "%.250s" är trasig - felaktig siffra (kod %d) i %sfilen "%.250s" är trasig - fel magisk siffra i slutet av första huvudetfilen "%.250s" är trasig - felaktig magisk siffra i slutet på andra huvudetfilen "%.250s" är trasig - felaktigt antal arkivdelarfilen "%.250s" är trasig - felaktigt utfyllnadstecken (kod %d)filen "%.250s" är trasig - nyradstecken saknas efter %.250sfilen "%.250s" är trasig - inget snedstreck mellan arkivdelnummerfilen "%.250s" är trasig - nulltecken i infodelenfilen "%.250s" är trasig - andra medlemmen är inte datadelenfilen "%.250s" är trasig - storleken är fel för angivet delnummerfilen "%.250s" är trasig - för kortfilen "%.250s" är trasig - fel antal delar för angivna storlekarfilen "%.250s" är formatversion %d.%d; hämta en nyare dpkg-splitfilen "%.250s" är inte en arkivdelfilen "%s" är trasig; heltal utanför tillåtet område i %sfilen "%s" är inte en del av ett arkiv
+filformatet känns inte igenfilen verkar vara ett arkiv som har gått sönder genom
+att ha hämtats i ASCII-lägefilnamnet kan inte innehålla nyradsteckenfilutlösarpost anger det ogiltiga paketnamnet "%.250s" (för intresse för filen "%.250s"): %.250sfilnamnet "%s" är inte absolutfilerna "%.250s" och "%.250s" är inte delar av samma filfillistfilen för paketet "%.250s" innehåller tomt filnamnfillistfilen för paketet "%.250s" saknar avslutande radbrytningfillistfilen för paketet "%.250s" saknas; antar att paketet inte har några filer installeradetvingar ominstallation av alternativet %s då länkgruppen %s är trasigförgrening (fork) misslyckadesformatversion följs av skräpformatversion saknar punktformatversionsnummerformatversion med tom huvudkomponentformatversion med tom underkomponentgenererade trasigt ar-huvud för "%s"huvudet är för långt, vilket gör delen för lång; paketnamnet eller
+versionsnumret måste vara väldigt långt, eller något sådant; ger uppignorerar %d varning om kontrollfilernaignorerar %d varningar om kontrollfilernaignorerar förstörelse, kan ändå fortsätta!ignorerar konflikt, kan ändå fortsätta!ignorerar beroendeproblem med %s:
+%signorerar för-beroendeproblem!ignorerar begäran att ta bort %.250s som inte har installeratsignorerar begäran att ta bort %.250s, enbart
+ konfigurationsfiler finns på systemet. Använd --purge för att ta bort demogiltigt arkitekturnamn i specificerare "%s:%s": %sogiltigt namn "%.250s" på paket som väntas på: %.250sogiltigt paketnamn på rad %d: %.250sogiltigt paketnamn i väntad utlösare "%.255s": %sogiltigt paketnamn i specificerare "%s%s%s": %sogiltigt förestående utlösarnamn "%.255s": %sinfodatabasens format (%d) är tokigt eller för nytt; försök få tag i en nyare dpkginformationsfilen %s/%s inte associerad med något paketinstallation av "%.255s"installeratinstallation av %.250s skulle förstöra %.250s, och
+ avkonfigurering tillåts inte (--auto-deconfigure kanske hjälper)installation av %.250s skulle förstöra befintliga programinternt fel (bugg)ogiltigt tecken "%c" i arkivet "%.250s" medlemmen "%.16s" storlekogiltigt tecken "%c" i fältbreddfelaktigt tecken i revisionsnumretfelaktigt tecken i versionsnumretogiltig komprimeringsnivå för -%c: "%ld"ogiltiga komprimeringsflaggor: %sfelaktig deb-formatversion: %sogiltigt heltal för -%c: "%.250s"ogiltigt heltal för --%s: "%.250s"ogiltig eller okänd syntax i utlösarnamnet "%.250s" (i utlösare som visar intresse för paketet "%.250s")ogiltigt paketnamn "%.250s" i utlösarfördröjningsfilen "%.250s"felaktig statusogiltigt utlösarnamn "%.250s": %.250srad inte avbslutad när %s försökte läsasrad för lång eller inte avslutad när %s försökte läsaslänken %s är både primär och slavlokal omdirigering från: %s
+lokal omdirigering av %slokal omdirigering av %s till %slokal omdirigering till: %s
+lokalt omdirigerad till: %s
+långa filnamnutvecklarskript "%.50s" har felaktig behörighet %03lo (måste vara >=0555 och <=0775)utvecklarskript "%.50s" är inte en vanlig fil eller symbolisk länkkunde inte ta status på utvecklarskript "%.50s"malloc misslyckades (%zu byte)manuellt lägehuvudfilhuvudlänkkan ha problem att ta bort %s, eftersom det tillhandahåller %s ...får ej vara tomma strängennådde gräns för minnesanvändningsammanblandning i divert-to
+  vid borttagning av "%s"
+  hittade "%s"sammanblandning av paket
+  vid borttagning av "%s"
+  hittade "%s"avslutande klammerparentes saknasdet förekommer en blandning av instanser av paket som kan och som inte kan installeras sida vid sida; antagligen på grund av uppgradering från en inofficiell dpkgmulti-archmånga konflikter och ersätterdet förekommer flera instanser av paket som inte kan installeras sida vid sida; antagligen på grund av uppgradering från en inofficiell dpkgflera statoverride är satta för filen "%.250s"måste anropas från ett utvecklarskript (eller med flaggan --by-package)måste börja med ett alfanumerisktmåste börja med ett alfanumeriskt teckennamnet %s är både primär och slavbehöver en åtgärd att utföranyradstecken i fältnamn "%.*s"nyradstecken tillåts inte i update-alternatives-file (%s)inga alternativ för %sdet finns inga överskrivningaringen paketinformation i "%.255s"inget paket med namnet "%s" är installerat, kan inte konfigurerainga paket hittades som matchar %shittade ingen sökväg som motsvarar mönstret %snej, %s är systemkritiskt, kommer inte att avkonfigurera
+ det för att aktivera %snej, kan fortsätta med %s (--auto-deconfigure hjälper):
+%skontrollerar inte innehållet i kontrollområdetej installeratej installerat, men konfigurationsfiler kvarstårtar inte bort %s eftersom det inte är en symbolisk länkersätter inte %s med en länkingenting efter kolon i versionsnumrettomt paketnamn i --%s kommaseparerade lista "%.250s"antal arkivdelarföråldrad flagga '--%s', otillgängliga paket rensas upp automatisktgammal konfigurationfil "%.250s" var en tom katalog (och har nu tagits bort)gammal fil "%.250s" är samma som ett flertal nya filer! (både "%.250s" och "%.250s")gammal version av paketet har för lång informationsfilnamn som börjar på "%.250s"enbart exakta versionsnummer kan användas i fältet "%s"öppnande av komponenten "%.255s" (i %.255s) misslyckades på ett oväntat sättminnet slut för ny uppstädningspostminnet slut för ny uppstädningspost med många parametrarminnet slut för ny felsammanhangignorerar problem då --force använts:paketet %.250s är redan installerat och konfigureratpaketet %.250s är inte redo för att konfigureras
+ kan inte konfigurera (aktuell status är "%.250s")paketet %.250s är inte redo för hantering av utlösare
+ (aktuell status är "%.250s" med inga förestående utlösare)paketet %s %s kan inte konfigureras då %s är på en annan version (%s)paketet %.250s kan inte konfigureras då %s inte är redo (aktuell status är "%.250s")paketet %s innehåller list som informationsfilpaketet %s måste ominstalleras, men tar bort det ändå enligt ditt önskemålpaketet %s kräver återinstallation, tar inte bortpaketet %s skulle kvarhållas, men hanteras ändå enligt önskemålpaketet "%s" är ej tillgängligtpaketet "%s" är ej installeratpaketet "%s" är inte installerat och ingen information finnspaketarkitekturpaketarkitekturen (%s) matchar inte systemets (%s)paketet innehåller för långt kontrollinformationsfilnamn (börjar på "%.50s")paketets kontrollinformation innehåller katalogen "%.250s""rmdir" på paketets kontrollinformation "%.250s" svarade inte "ej katalog"hämtning av paketkontrollinformationpaketet omdirigerar andra till: %s
+extrahering av paketfältvärdeMD5-kontrollsumma för paketfilextrahering av paketfilsystempaketet har status %s, men utlösare väntarpaketet har status %s med utlösare är föreståendepaketet är i ett väldigt dåligt inkonsistent läge; du bör
+ ominstallera det innan du försöker ta bort det.Paketet är i ett väldigt dåligt inkonsistent läge; du bör
+ ominstallera det innan du försöker konfigurera.paket kan inte innehålla nyradsteckenpaketnamnpaketnamnet har tecken som inte är gemena alfanumeriska eller "-+."verifiering av paketsignaturpaketversionsnummerfel %d saknasdelfil "%.250s" är inte en vanlig fildelstorlek är för stor eller ej positivdelstorleken måste vara minst %d KiB (för att tillåta huvud)lyckades
+klistra insökvägen kan inte innehålla nyradsteckenför-beroendeproblem - installerar inte %.250sprioritetprioriteten är utanför tillåtet områdeprioriteten måste vara ett heltalprioriteten på %s är utanför tillåtet område: %sprioritet på %s: %släsfel i %.250släsfel i "%.250s"fel vid läsning av konfigurationsfil "%.250s"läsfel på standard inläsfel på stdin vid konfigurationsfilsfråganläser paketinfofilen "%.255s"läser paketinfofilen "%s": %släser statoverride-fil "%.250s"återskapade paketfilangående %s innehållandes %s, problem med för-beroenden:
+%sangående %s som innehåller %s:
+%sborttagning av %.250star bort arkitekturen "%s" som för närvarande används av databasentar bort manuellt valda alternativ - växlar %s till autolägenamnbyte innebär överskrivning av "%s" med
+  annan fil "%s", ej tillåtetnamnbyte: ta bort duplicerad gammal länk "%s"efterfrågad operation kräver superanvändarbehörighetrm-kommando för städningsökte, men hittade inga paket (filer som matchar *.deb)<okänd>aktiverar automatiskt val av %sflera paketinformationsposter funna, bara en tillåtsskalkommando för att flytta filerhoppar över att skapa %s då den associerade filen %s (från länkgruppen %s) inte finnsslavfilslavlänkslavlänken är samma som huvudlänken %sslavnamnkällfil "%.250s" inte en vanlig filåterskapande av delad paketfilstatoverride-fil innehåller tomradstatoverride-fil saknar avslutande radbrytningstatusstatusloggaretar bort avslutande /underprocessen %s gav felkod %dstorleken på den symboliska länken "%.250s" har ändrats från %jd till %zdsyntaxfel i filutlösarfil "%.250s"syntaxfel i statoverride-filtar bara ett argument, namnet på utlösarenmålet är en katalog - kan inte hoppa över kontroll av konfigurationsfilerdet finns flera versioner av del %d - åtminstone "%.250s" och "%.250s"det finns inget skript i den nya versionen av paketet - ger uppDetta är ett systemkritiskt paket; det bör inte tas bort.för att återgå till automatiska uppdateringar, använd "%s --auto %s"för många fel, stannarför lång rad eller saknat nyradstecken i "%.250s"syntaxfel i utlösarintressefilen "%.250s"; ogiltigt paketnamn "%.250s": %.250sutlösarnamnet innehåller ogiltigt teckenutlösarposter finns inte ännuutlöstutlösar-ci-filen "%.250s" innehåller ogiltig utlösarsyntax i utlösarnamnet %.250s: %.250sutlösar-ci-filen innehåller okänt direktiv "%.250s"utlösar-ci-filen innehåller ogiltig syntax för direktivutlösardatakatalogen har inte skapats ännuutlösare i slinga, avbrytsförsöker skript från det nya paketet istället ...försöker skriva över "%.250s" som också finns i paketet %.250s %.250sförsökte skriva över "%.250s", vilket är den omdirigerade varianten av "%.250s"försökte skriva över "%.250s", vilket är den omdirigerade varianten av "%.250s" (paket: %.100s)försöker skriva över katalogen "%.250s" från paketet %.250s %.250s med icke-katalogförsöker skriva över delad "%.250s" som skiljer sig från andra instanser av paketet %.250stvå kommandon angivna: --%s och --%skunde inte (åter)öppna indatadelfil "%.250s"kunde inte ändra ägandeskap på målfilen "%.250s"kunde inte kontrollera om "%.250s" existerarkunde inte testa låsstatus för filen "%s"kunde inte kontrollera om arkivet "%.250s" existerarkunde inte byta ägare på säkerhetskopierad symbolisk länk för "%.255s"kunde inte rensa upp i röran runt "%.255s" innan en ny version installeraskunde inte stänga filen "%s"kunde inte ta stänga ny fil "%.250s"kunde inte ta stänga ny fil för uppskjutna utlösare, "%.250s"kunde inte stänga uppdaterad status för "%.250s"kunde inte skapa "%.255s"kunde inte skapa "%.255s" (vid hantering av "%.255s")kunde inte skapa filen "%s"kunde inte skapa ny fil "%.250s"kunde inte skapa temporär katalogkunde inte skapa utlösarstatuskatalogen "%.250s"kunde inte ta bort kontrollinformationsfil "%.250s"kunde inte ta bort gammal katalog "%.250s": %skunde inte ta bort använd depåfil "%.250s"kunde inte kasta bort "%.250s"kunde inte köra %s (%s)kunde inte fylla ut %.250skunde inte tömma %.250s efter utfyllnadkunde inte tömma (flush) filen "%s"kunde inte tömma (flush) ny fil "%.250s"kunde inte tömma uppdaterad status för "%.250s"kunde inte ta status på källfilkunde inte synkronisera uppdaterad status för "%.250s"kunde inte få tag i filhandtag för katalogen '%s'kunde inte ignorera signal %s innan %.250s startaskunde inte installera "%.250s" som "%.250s"kunde inte installera (vad som antas vara) ny informationsfil "%.250s"kunde inte installera ny informationsfil "%.250s" som "%.250s"kunde inte installera ny fil för uppskjutna utlösare, "%.250s"kunde inte installera ny version av "%.255s"kunde inte installera uppdaterad status för "%.250s"kunde inte låsa %skunde inte skapa säkerhetskopierad länk av "%.255s" innan den nya versionen installeraskunde inte säkerhetskopiera symbolisk länk för "%.255s"kunde inte flytta undan "%.255s" för att installera ny versionkunde inte öppna "%.255s"kunde inte öppna katalogen "%s"kunde inte öppna filen "%s"kunde inte öppna ny depåfil "%.250s"kunde inte öppna utdatafil "%.250s"kunde inte öppna källfil "%.250s"kunde inte öppna temporär kontrollkatalogkunde inte öppna utlösar-ci-fil "%.250s"kunde inte ta öppna fil för uppskjutna utlösare, "%.250s"kunde inte öppna/skapa ny fil för uppskjutna utlösare, "%.250s"kunde inte läsa depåkatalog "%.250s"kunde inte läsa filutlösarfil "%.250s"kunde inte läsa filidentifierarflaggor för "%.250s"kunde inte läsa länken "%.255s"kunde inte läsa delfil "%.250s"kunde inte ta bort "%s"kunde inte ta bort säkerhetskopierad version av "%.250s"kunde inte ta bort kopierad källfil "%.250s"kunde inte ta bort nyss uppackad version av "%.250s"kunde inte ta bort nyinstallerad version av "%.250s"kunde inte ta bort nyss installerad version av "%.250s" för att möjliggöra återinstallation av säkerhetskopiakunde inte ta bort gammal informationsfil "%.250s"kunde inte namnändra ny depåfil "%.250s" till "%.250s"kunde inte öppna om delfilen "%.250s"kunde inte återställa säkerhetskopierad version av "%.250s"kunde inte säkert ta bort "%.255s"kunde inte säkert ta bort "%.255s"kunde inte säkert ta bort gammal fil "%.250s": %skunde inte söka till början av %.250s efter utfyllnadkunde inte ställa in buffring av %s-databasfilkunde inte ställa in "close-on-exec"-flaggan på "%.250s"kunde inte ställa in körrättigheter på "%.250s"kunde inte ställa in läge på målfilen "%.250s"kunde inte utföra setenv för utvecklarskriptkunde inte utföra setenv för underprocesserkunde inte ta status på %s "%.250s"kunde inte ta status på %s "%.250s": %skunde inte ta status på "%.250s"kunde inte ta status på kontrollkatalogkunde inte ta status på nu installerad konfigurationsfil "%.250s"kunde inte ta status på ny distribuerad konfigurationsfil "%.250s"kunde inte ta status på andra ny fil "%.250s"kunde inte ta status på återställd "%.255s" innan en ny version installeraskunde inte ta status på källfilen "%.250s"kunde inte ta status på fil för uppskjutna utlösare, "%.250s"kunde inte synkronisera katalogen "%s"kunde inte synkronisera filen "%.250s"kunde inte synkronisera filen "%s"kunde inte synkronisera ny fil "%.250s"kunde inte klippa för uppdaterad status för "%.250s"kunde inte låsa upp %skunde inte skriva filen "%s"kunde inte skriva till ny fil "%.250s"kunde inte skriva ny fil för uppskjutna utlösare, "%.250s"kunde inte skriva till statusfilidentifierare %dkunde inte skriva uppdaterad status för "%.250s"obalanserade citattecken i "%s"oväntat bzip2-feloväntad data efter paket och val på rad %doväntat filslut i %s i %.255soväntat slut på fil eller strömoväntat filslut när %s försökte läsasoväntat slut på indataoväntat radslut efter paketnamn på rad %doväntat radslut i paketnamn på rad %doväntat radslut i statoverride-filokänt argument "%s"okänd komprimeringsstrategiokänd komprimeringsstrategi "%s"!okänd komprimeringstyp "%s".okänd deb-formatversion: %sokänd flagga för force/refuse: "%.*s"okänd flagga "%s"okänd flagga -%cokänd flagga --%sokänd utdataformat "%s" för bekräftelseokänd önskad status på rad %d: %.250suppackat, men okonfigureratkomprimeringsförinställning stöds ejkomprimeringsmetoden "%s" stöds ej för enhetlig komprimeringfilhuvudet innehåller alternativ som inte stödstypen av integritetskontroll stöds ejuppdateringskatalogen innehåller filen "%.250s" vars namn är för långt (längd=%d, max=%d)uppdateringskatalogen innehåller filer med olika långa namn (både %d och %d)uppdaterar alternativet %s då länkgruppen %s har bytt slavlänkaranvändardefinierat fältnamn "%.*s" för kortanvänder %s för att tillhandahålla %s (%s) i autolägeanvänder %s för att tillhandahålla %s (%s) i manuellt lägevärde för "%s" har fel format på raden "%.*s"värdet för fältet "%s" ej tillåtet i detta sammanhangverifiering av paketet %s misslyckades!verifiering av paket %s misslyckades; men installerar ändå enligt önskemål<ingen>version %.250s av %.250s redan installerat, hoppar överversionsnumret börjar inte med en siffraversionssträng har inbäddade blankstegversionssträng ej tomversionerade tillhandahållandenväntan på underporcessen %s misslyckadesvarningvid läsning av %s: %snär %.250s togs bort var inte katalogen "%.250s" tom, så den togs inte bortnär %.250s togs bort kunde inte katalogen "%.250s" tas bort: %s - katalogen kan vara en monteringspunkt?nedgraderar inte %.250s från version %.250s till %.250s, hoppar överja, kommer att avkonfigurera %s (förstörs av %s).ja, kommer att ta bort %s till förmån för %sdu måste ange paket med sina egna namn, inte genom att ange namnen på de filer de kommer i
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/th.gmo dpkg-1.20.7.1/po/th.gmo
--- dpkg-1.20.7.1-orig/po/th.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/th.gmo	2021-06-09 18:25:15.943504938 -0500
@@ -0,0 +1,683 @@
+������:�N?�Na�Nk;O��O�oP&�P=Q&UQ|Q-�R.�R�R.�R-S IS4jS�S5�S-�S.T0NT1T$�T4�T/U;UqSU(�U$�UV3V:SV6�V1�V1�V!)W2KW(~W�W�W�W.�WXS'X{X�X�X9�Xm�X)kY:�Y9�Y.
+Z'9Z&aZ�Z3�Z5�Z[[v[[�[U�[D\Y\j\w\�\Z�\�\]�]=�] ^5^F^�U^=1`Ro`1�`D�`L9aA�a'�a&�a(b'@b+hb4�b!�b,�b9c-Rc�c#�c�c$�cd"#dFd!dd#�d�d�d�d�d�d"e2>e1qe/�e�e.�ef-4fRbfH�fQ�fAPge�gf�gI_h7�h<�hi(1iBZi�i�i�i
�i �ij5*j1`j0�j�j�j#�j!k4kQkKnk7�k5�k-(lVl!pl�l'�l-�l-m 0m5Qm�m �m�m$�m,n.2n.an�nH�n6�n(0o>Yo$�o �o�o�opp�(p�p#�p:q-=rkr|r�r�r*�r<�r#s-8s-fs��s)t6t�Mt[Cu��ug�y
{|(}(A}-j}�}8�}<�}.*~Y~0p~3�~1�~/�;1�*"�JM�2���ˀ&p�2��EʂV�g�5��.��-�+�/?�
o�%}�/��*ӄ&��!%�]G���!��M̅�20��c���"��ʉ4�.�5M�3����GǊ8�,H�u�(����ԋ��3��)-�$W�:|�,��V� ;�\�*x�����&ȍ3�-#�+Q�,}�	����ʎ*�
�#� @�Ha���������g5�j������4��5��������u[�&іA��{:�!��,ؗ*�.0�_��~��� ��5��ݚ ��,�$B�.g�>��*՛;�,<��i�$�u,����"{�������9Þ(��X&�3�?��8�2,�1_�,��:��4��5.�4d�A��Mۡ-)�W�k�#����Ƣۢ� �1'�8Y�?��Bң6�L�&h�.��!��!�5�8�U�k�������	��9ƥ.�#/�,S�����%���%�-*�1X�����)��1�:�?V�&����=ڨ7�P�!j�.��*��#�"
+�&-�0T�����@��+��;$�3`�����A̫�&-�-T�0��;��0�( �?I�)��-��"��4�EO���,��"ݮ!�"�5A� w�8��ѯ�-��5-�,c�B��BӰ+�GB�$�� ��:б;�G�`�&o���7���D�cM���2��*�"�3>�:r�-��&۴��4�J�"f�����(��=ϵ*
�J8���"����ж�-�5�)F�%p�������ط�����)#�M�l�!��!��#ϸ�%�%6�'\�,����ʹ�*�'1�'Y���!���� պ-��#$�#H�+l�%��$��� �� �9�L�"b�:����Fڼ!�=�Z�$w�����ͽ�#��!�9�!Y�"{�:��پ5�� .�2O���%����0׿*�$3�/X���6��V��"%�(H�q�<��.��)��(�*@�+k���,��)��4
+�3?�2s�4��;��<�6T�:��7��@��0?�;p�?��$��A�=S�$��0��!��	�b$���c��	�:'�<b�=��_��H=���������)��)�$6��[�\��&<�&c�'�� ��7��t�2��-��'��4	�.>�)m�G��-��
�	$�k.�/����>��%�$D�#i�&��!����!��"�^:�@����%��+�7;�!s������������O!�8q�*���������3�G�_�7z�5����|��
+{���m��0�GE���)��!�����5,�b�y�"��4����!�C%�=i�%��
�� ��(��%�%B�7h���I��G�PJ�G��.��?�#R�7v�#��+��2��Y1�f��L��M?�&��K��3�=4�r���=����4�F6�1}�;��&���1�P�%j�.��.��a��eP� ����D��)�H�_�&r�-��7�����
�.+�Z�c�|�"��������)��$�&A�"h�"��"����6��!�@�7R�B��H��&�0=�n�6����$��4��(�OD�
+��
+����
+��%����%�*:�e�
l�z�+��7��+��!�$A�4f�F��@��6#�1Z���,��R��'&�$N�	s�Z}�4��2
�'@�h�.��D��G��Y@�Q��^��%K�+q�2��%��%��1�+N�Nz���!��3�*9�d�5~���"��$��2�+J�+v�,������"�$'�L�!f�*����*��0��0+�&\�3��4��5��)"�,L�y�D��*��4��0�H�f�&�#��#��%��(�.=�9l�'��*��.��(�!E�g�(}�(��4��4�[9�,��4��#��,�"H�"k�/��/��+��+�-F�*t�&��!�����"� :�2[�0��&��B��#)�.M�|����� ��1��#�7�!Q�3s���*�����6#�&Z� ��.����4��1�+P�|���"������"�3�G�Z�!n�(������:��"/#RSvM�E(^(�*�.�0
+";I^�4�(�"8Pc��B�`�9B'|#�`�u)���^"1�T	�0c��D
F�
l+>�S�+]8:�@�T+gk�Q�cQT�i
+8t{�f))���jjI�I:i��t:t�e$:�o�U5/�>�$�BbEr�2�15�]��1x�T9]�T�1A bs h� ?!K!�c!V"js"(�"##+#$K#p#��#r$E�$��$��&:u'-�'�'o�'|d+��+b�,�-��-��.�B/��/��0�*1`�1Y+22�2Y�2h3c{3}�3�]4��4�b5|�5�f6�6�i7��7Ks84�8N�8QC9k�9M:wO:Y�:]!;;V�; �;v<��<�h=�*>��>�?9�@��A}�B�C2�Co�C�QD<�D)E>EA\E8�EJ�Ex"F��F�+G)�G5�Gq*H\�HM�HhGI��I�PJ��J�pKPL9fLK�Lt�L�aM�!Ne�N�*OJ�OP�O;LP��Ps
+Q�~QJRmdR��R�qS�GT�TJ�UWVIsV�V�V&�VCW FX[gX��X{u[M�[)?\/i\$�\`�\�]]�]i^i�^Y�^!H`Pj`��`��b�Mc�$k��m^Eo'�qP�q�rL�r�s��srat2�ttun|u��uqvx�vww�+xM�x��xt�y_'zr�}��}��~}rQ��B�lʀn7�{���"����Ƃ}c����u�H	�R�d�gq�oن6I�x��������o��o�~��K��L�iڏ,D�q��z�GA�Y��}�	a�'k�2��Ɠ��]��^��pT�Lŕ��P��6�i&�.����]ۗ9�k��g%�k����-�1@�`r�IӚL�\j�aǛ)��9�������ڠ�ʡ���k��z�d~�v��Z���K����U�Zծ`0�����C�B��&����L��l�%S�4y�e��Q�gf��ηG�hǸh0����H��U���h�}���,���ؾSu��ɿ����]���~���2�k���/����qi�����s���w��4^�G��B��M�l�����X��y���������O�`��j0�}����o��}�<��T��H$�Qm�H��0�'9��a�{��ay�~��OZ�p��Z�Jv�Z��l����D �ue�_��^;�t����`��K��R�� �?��c��ZT�v���&�B��~���{�Z�*g����{5�{��d-�N��S���5�]��zA�����I�������c\����|r����;��2��������9:�Rt�U��Q��o�o��Ea����Bc�D��k���W�^���H����N~����f��?���9����9��0�����E{����NZ�����Z�0.��_��&�~���Q�������\t�9��?�.K�Az�X��?�U�Qf����Ls����a�Ux�%��4��E)�_o�B��eux�<�E2Kx�M�C1fuU�`2f�U�nPW�Y�q���U+e�U�t={�l.	F�	]�	U@
+f�
+x�
+evi�qF��W:
X�
b�
GNG�S��2��E���d�W�;HO�E�67Q7�H�3
+9>;xT�q	>{|�@7~x'�CCcq�RZl��BPq��J�O�*=�hompE�}$f�r	e|>�l!���8 h� �c!�"��"��#S8$��$�K%��%q�&L�&�@'��'jk(w�(XN)K�)��)f�*,+E4,�z,��,��-�a.�B/ �/o0Z|0B�0r1o�1��1i�2y�3zm4��4~~5v�5zt6�6{�7fr8_�8|99m�9n$:��:��;<!1<�S<�:=<�=��=o�>W?Hf?c�?^@Nr@Y�@ZA�vA�#B$�BT�Br C��Cg-DP�DN�Da5EV�EV�E!EF�gF�DGo�G5>H!tH�H�H��HNjIZ�IAJ?VJ!�Je�J-LNLL9�L_�M�5NZ�NZLOj�OZPvmP��P<sQ7�QB�Q�+R?�RQ�R�IS��SizT'�TfUNsU@�U]V�aVBW�OW�1X��X��Yw:Z��Z{^[��[��\r2]}�]�#^�^�`��`^Ua��ab>b��b&OcHvc��c<`dw�d�ei�e�fQ�fb5gZ�g;�gQ/h��h�i��i~jl�k�k�lK�l0m.DmXsm|�m�In

+o	oW"o�zo*pZ:pE�pk�p:GqF�qH�qirl|r��r`�sN�sa:tN�t��tA�u�u��u��v�GwM!x�oxF�x�>y�yo�y�RzK�z�<{|'|H@|'�|U�|K}MS}��}(~Q8~3�~��~oJ��LH���������rH�^����Ră�����Z��Eޅ$$��I�|�o��o�Ov�aƈ�(�����C������]{�ٌoY�]ɍn'�o��{����5G�E}�uÐQ9�3��p��;0�Kl�]��~�H��Uޓy4�=��A�q.����3!�CU�O��B�O,�t|���U����yu���Zq�]̚**��U�]��Q�0�G2�8z�l��Q �Qr�lĞf1�`�����o�����i�?�T)�&~�N��{��]p�iΣ�8�f��m�^�]R�X��X	�tb��ק~��a�~i�f�qO�S��,�0B�)s�N�����u�B���;�H�Z8�A��6ծ2�B?�r��3��;)�Ke�{��^-�W��r�`W����Tm�W³f�W���ٴ�d�a�DK�W��W�Q@�L��G߷8'�7`�8��zѸnL�E��{��}�r�~�����Ӽ���e=�s��m�v��u��_r������k��Z�Wn�E��E�FR�����������y��m�Kn����P�S���j�q������>�y��E~��c��F7r68��g��	j��o��\I$iT���:Ju!�0F���s�znM	B�#��h�V�N*�� )����������w�������N��Ur�7��z���:d�R�;6^S0�xL{������1�����
��I�x�w����������b%v�W����t�$��8�O;u�/{=0���X��5p�Cw�B\��������d8&�m��_}-���tF*���-5yrU_C.P.���#k$v�c��QM��{ ��=l;;2^����l/HgCR��	�+�����1�W��3����'j������k+_���S�){�]��<�f��T��?�(BK��A���6�y��1��`�(�L+
+N|����sI	%(T��:z�b��g�DU�/�����z�q9��'�o�R����E%�`'�C�d���"
+:����"c��V�p>��
+DaPum���@��A�]W�g�Y,��������O������,a)�E�sY�!L�7MN�x�����h��Zj�}��w>L&�"c�9JR�ZiXf�M��*��`�����Of�27�1t9,���P�e�%��\�4*�-rZ
+Gx�K�����H��)a(}�^9�Be��o�!����pQ�3v�_h�5-X8�����F�![2�^|s�WQZ��mhn?�K�k=���~�~H�[��l�q�<
k�3�?&�G�[ea�b�V`@�#��@vo���S����0��=.�Ib�G���n����Y������J~ dl��4���>$����\����5[���n.����/V�EH�i4|,f�}�TQ�G��D�&���@�t<��U����K�p Ae���iY]��qm����#A
�y����?�
D<�X|4'��"O��6�]�3+���J�u��2
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link currently absent  link currently points to %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s suggests %s%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one package name argument--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMore than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenVersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open security status notification channelcannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedepochepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentgenerated corrupt ar header for '%s'header is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file or streamunexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion number does not start with digitversion string has embedded spacesversion string is emptyversioned Provideswait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.23
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-06-26 16:13+0200
+Last-Translator: Theppitak Karoonboonyanan <thep@debian.org>
+Language-Team: Thai <thai-l10n@googlegroups.com>
+Language: th
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=1; plural=0;
+
+ การสะกิดที่คั่งค้างของแพกเกจที่อาจไม่สามารถจัดลำดับการทำงานได้:
+
+ไม่มีแฟ้มค่าตั้ง `%s' อยู่ในระบบ
+จะติดตั้งแฟ้มค่าตั้งแฟ้มใหม่ตามที่คุณสั่ง
+
+ตัวเลือกการดีบั๊กสามารถใช้ผสมกันได้ด้วยการ or แบบบิต
+อย่าลืมว่าค่าและความหมายต่างๆ อาจเปลี่ยนแปลงได้
+
+ใช้ 'dpkg' เพื่อติดตั้งหรือถอดถอนแพกเกจในระบบของคุณ หรือใช้
+'apt' หรือ 'aptitude' ถ้าต้องการการจัดการแพกเกจแบบเป็นมิตรกับผู้ใช้
+แพกเกจที่แตกด้วยคำสั่ง 'dpkg-deb --extract' จะติดตั้งไม่ถูกต้อง !
+
+*คำเตือน* - การใช้ตัวเลือกที่ทำเครื่องหมาย [!] ไว้ อาจทำให้ระบบเสียหายอย่างร้ายแรงได้
+รายการการบังคับที่ทำเครื่องหมาย [*] ไว้ จะถูกเปิดใช้โดยปริยายอยู่แล้ว
+     ยังไม่มีการแก้ไขนับแต่ติดตั้งมา
+     ฉบับในแพกเกจมีเนื้อหาเหมือนกับที่ติดตั้งครั้งล่าสุด
+     ไม่ใช่แฟ้มปกติ                %.255s
+   คุณต้องการทำสิ่งใดกับแฟ้มนี้?  ตัวเลือกของคุณคือ:
+    Y หรือ I : ติดตั้งฉบับของผู้ดูแลแพกเกจ
+    N หรือ O : ใช้ฉบับเดิมของคุณที่ติดตั้งอยู่
+      D     : แสดงความแตกต่างระหว่างทั้งสองฉบับ
+      Z     : พักโพรเซสนี้ลงไปเบื้องหลังเพื่อตรวจสอบระบบ
+  %.250s (รุ่น %.250s) มีอยู่ และ%s
+  %.250s (รุ่น %.250s) กำลังจะถูกติดตั้ง
+  %.250s %s
+  %.250s ถูกติดตั้งแล้ว แต่เป็นรุ่น %.250s
+  %.250s ไม่ได้ติดตั้งไว้
+  %.250s จะถูกถอนคืนค่าตั้ง
+  %.250s จะถูกติดตั้ง แต่ใช้รุ่น %.250s
+  %.250s จะถูกถอดถอน
+  %.250s ถูกแตกแล้ว แต่ยังไม่เคยถูกตั้งค่า
+  %.250s ถูกแตกแล้ว แต่เป็นรุ่น %.250s
+  %.250s รุ่นสุดท้ายที่ตั้งค่าไว้คือ %.250s.
+  %.250s จัดเตรียม %.250s และมีอยู่ และ%s
+  %.250s จัดเตรียม %.250s และกำลังจะถูกติดตั้ง
+  %.250s จัดเตรียม %.250s แต่%s
+  %.250s จัดเตรียม %.250s แต่กำลังจะถูกถอนคืนค่าตั้ง
+  %.250s จัดเตรียม %.250s แต่กำลังจะถูกถอดถอน
+  %s (%s) จัดเตรียม %s
+  -?,  --help                      แสดงข้อความช่วยเหลือนี้
+       --version                   แสดงเลขรุ่น
+
+  แพกเกจ %s ยังรอคอยการประมวลผลการสะกิด
+  แพกเกจ %s ยังไม่ถูกตั้งค่า
+  แพกเกจ %s ไม่ได้ถูกติดตั้ง
+  แพกเกจ %s จะถูกถอดถอน
+  แพกเกจ %s ซึ่งจัดเตรียม %s ยังรอคอยการประมวลผลการสะกิด
+  แพกเกจ %s ซึ่งจัดเตรียม %s ยังไม่ถูกตั้งค่า
+  แพกเกจ %s ซึ่งจัดเตรียม %s ไม่ได้ถูกติดตั้ง
+  แพกเกจ %s ซึ่งจัดเตรียม %s จะถูกถอดถอน
+  รุ่นของ %s ในระบบคือ %s
+  รุ่นของ %s ในระบบ ซึ่งจัดเตรียมโดย %s คือ %s
+  รุ่นของ %s ที่จะถูกตั้งค่าคือ %s
+  ลิงก์ขาดหายอยู่  ลิงก์ขณะนี้ชี้ไปยัง %s  รายการลูก %s: %s %7jd ไบต์, %5d บรรทัด   %c  %-20.127s %.127s
+ %d ใน %s:  %d แพกเกจ จากหมวดต่อไปนี้: %s (%jd ไบต์)
+ %s (%s) ทำให้ %s พัง และ%s
+ %s (ไม่ใช่แฟ้มปกติ)
+ ==> ถูกลบ (โดยคุณหรือโดยสคริปต์) หลังการติดตั้ง
+ ==> แฟ้มในระบบซึ่งคุณสร้างเองหรือสร้างโดยสคริปต์
+ ==> แฟ้มซึ่งมากับแพกเกจและจัดเตรียมโดยผู้ดูแลแพกเกจ
+ ==> จะใช้แฟ้มค่าตั้งเก่าโดยปริยาย
+ ==> มีการแก้ไข (โดยคุณหรือโดยสคริปต์) หลังการติดตั้ง
+ ==> ผู้จัดแจกแพกเกจได้จัดเตรียมรุ่นใหม่ให้
+ ==> จะใช้แฟ้มเดิมตามที่คุณสั่ง
+ ==> จะใช้แฟ้มค่าตั้งใหม่โดยปริยาย
+ ==> จะใช้แฟ้มใหม่ตามที่คุณสั่ง
+ แพกเกจ %s: ส่วนย่อย  การกระทำปริยายคือติดตั้งฉบับใหม่
+ การกระทำปริยายคือใช้ฉบับเดิมของคุณ
+ และ  ต้องใช้ โปรแกรม %d โปรแกรมที่ต้องใช้ไม่มีใน PATH หรือไม่สามารถเรียกทำงานได้
+%s%d แฟ้มและไดเรกทอรีติดตั้งอยู่)
+องค์ประกอบส่วนควบคุมขาดหายไป %d รายการ%s (โพรเซสย่อย): %s
+%s - ความสำคัญ %d%s ทำให้ %s พัง%s ขัดแย้งกับ %s%s เสียหาย: %sตัวเลือกของการดีบั๊กของ %s: --debug=<ฐานแปด> หรือ -D<ฐานแปด>:
+
+    เลข  รายการในโปรแกรม  คำบรรยาย
+%s ต้องใช้ %s%s เพิ่มความสามารถให้กับ %sตัวเลือกสำหรับบังคับของ %s - ควบคุมพฤติกรรมเมื่อพบปัญหา:
+  เตือนแต่ทำต่อไป:       --force-<รายการ>,<รายการ>,...
+  หยุดเมื่อพบปัญหา:       --refuse-<รายการ>,<รายการ>,... | --no-force-<รายการ>,...
+ รายการสำหรับการบังคับ:
+%s ไม่ได้ติดตั้งอย่างถูกต้อง จะละเลยแพกเกจที่ต้องใช้แพกเกจดังกล่าว%s ต้องใช้ %s ขณะติดตั้ง%s ควรใช้ร่วมกับ %s%s แนะนำ %s%s:
+    รุ่นของรูปแบบข้อมูลส่วนย่อย:           %d.%d
+    ส่วนย่อยของแพกเกจ:                %s
+        ... รุ่น:                     %s
+        ... สถาปัตยกรรม:             %s
+        ... ผลรวมตรวจสอบ MD5:       %s
+        ... ความยาว:                %jd ไบต์
+        ... ตัดแบ่งที่ทุกๆ:              %jd ไบต์
+    หมายเลขส่วนย่อย:                  %d/%d
+    ความยาวส่วนย่อย:                  %jd ไบต์
+    ออฟเซ็ตของส่วนย่อย:                %jd ไบต์
+    ขนาดของแฟ้มส่วนย่อย (ส่วนที่ใช้):      %jd ไบต์
+
+%s: แฟ้มค่าตั้ง '%.250s' ไม่ใช่แฟ้มธรรมดาหรือ symlink (= '%s')%s: แฟ้มค่าตั้ง '%.250s' ชี้ต่อๆ ไป กลายเป็นชื่อแฟ้มที่เสียหาย
+ ('%s' เป็น symlink ไปยัง '%s')%s: แฟ้มค่าตั้ง '%s' เป็นลิงก์วนกลับ
+ (= '%s')%s: มีปัญหาความขึ้นต่อกันระหว่างแพกเกจ แต่จะตั้งค่าตามที่คุณสั่ง:
+%s%s: มีปัญหาความขึ้นต่อกันของแพกเกจ แต่จะประมวลผลการสะกิดตามที่คุณสั่ง:
+%s%s: มีปัญหาความขึ้นต่อกันของแพกเกจ แต่จะถอดถอนตามที่คุณสั่ง:
+%s%s: เกิดข้อผิดพลาดขณะเชื่อมแฟ้มขาเข้าเข้ากับกระแสข้อมูล bzip2%s: เกิดข้อผิดพลาดขณะเชื่อมแฟ้มขาเข้าเข้ากับกระแสข้อมูล gzip%s: เกิดข้อผิดพลาดขณะเชื่อมแฟ้มขาออกเข้ากับกระแสข้อมูล bzip2%s: เกิดข้อผิดพลาดขณะเชื่อมแฟ้มขาออกเข้ากับกระแสข้อมูล gzip%s: ไม่สามารถเชื่อมโยง '%.250s' ไปที่ '%.250s': %s%s: ไม่สามารถลบ '%.250s' (ก่อนเขียนทับ): %s%s: ไม่สามารถลบ '%.250s': %s%s: ไม่สามารถลบแฟ้มสำรองเก่า '%.250s': %s%s: ไม่สามารถลบรุ่นจัดแจกรุ่นเก่า '%.250s': %s%s: ไม่สามารถเปลี่ยนชื่อ '%.250s' เป็น '%.250s': %s%s: เกิดข้อผิดพลาดภายในของ bzip2 เกี่ยวกับการอ่าน%s: เกิดข้อผิดพลาดภายในของ bzip2 เกี่ยวกับการอ่าน: '%s'%s: เกิดข้อผิดพลาดภายในของ bzip2 เกี่ยวกับการเขียน%s: เกิดข้อผิดพลาดภายในของ bzip2 เกี่ยวกับการเขียน: '%s'%s: เกิดข้อผิดพลาดภายในของ gzip เกี่ยวกับการอ่าน%s: เกิดข้อผิดพลาดภายในของ gzip เกี่ยวกับการอ่าน: '%s'%s: เกิดข้อผิดพลาดภายในของ gzip เกี่ยวกับการเขียน%s: เกิดข้อผิดพลาดภายในของ gzip เกี่ยวกับการเขียน: %s%s: เกิดข้อผิดพลาดภายในของ gzip เกี่ยวกับการเขียน: '%s'%s: lzma เกิดข้อผิดพลาดในการปิด%s: ข้อผิดพลาดของ lzma: %s%s: lzma เกิดข้อผิดพลาดในการอ่าน%s: lzma เกิดข้อผิดพลาดในการเขียน%s: เกิดข้อผิดพลาดขณะคัดลอกแบบผ่านตรง: %s%s: ไม่สามารถเปิด %s เพื่อทำ hash: %s%s: ไม่สามารถอ่านลิงก์ของแฟ้มค่าตั้ง '%s'
+ (= '%s'): %s%s: ไม่สามารถ stat แฟ้มค่าตั้ง '%s'
+ (= '%s'): %s'%.255s' ไม่มีองค์ประกอบส่วนควบคุม '%.255s'`%s' ชนกับ `%s''%s' มีค่า Priority '%s' ที่ผู้ใช้กำหนดเอง'%s' ไม่รับค่าเขตข้อมูล `%s' มีชื่อแพกเกจที่ใช้ไม่ได้ `%.255s': %sเขตข้อมูล `%s' ขาดชื่อสถาปัตยกรรม หรือมีข้อมูลขยะในที่ที่ควรเป็นชื่อสถาปัตยกรรมเขตข้อมูล `%s' ขาดชื่อแพกเกจ หรือมีข้อมูลขยะในที่ที่ควรเป็นชื่อแพกเกจเขตข้อมูล `%s' อ้างอิงไปยัง `%.255s':
+ `%c' เลิกใช้แล้ว ใช้ `%c=' หรือ `%c%c' แทนเขตข้อมูล `%s' อ้างอิงไปยัง `%.255s':
+ ความสัมพันธ์สำหรับเลขรุ่น %c%c ใช้ไม่ได้เขตข้อมูล `%s' อ้างอิงไปยัง `%.255s':
+ การเทียบเลขรุ่นเท่ากันทุกประการแบบไม่ชัดแจ้ง ขอแนะนำให้ใช้ `=' แทนเขตข้อมูล `%s' อ้างอิงไปยัง `%.255s':
+ ค่าเลขรุ่นขึ้นต้นด้วยอักขระที่ไม่ใช่ตัวอักษรหรือตัวเลข ขอแนะนำให้เพิ่มช่องว่างเขตข้อมูล '%s' อ้างอิงไปยัง '%.255s': ชื่อสถาปัตยกรรม '%.255s' ที่ไม่ถูกต้อง: %sเขตข้อมูล `%s' อ้างอิงไปยัง `%.255s': เลขรุ่นยังไม่จบเขตข้อมูล `%s' มีรูปแบบผิดไวยากรณ์หลังจากการอ้างถึงแพกเกจ `%.255s''%s' ต้องระบุค่าด้วยไม่พบ '%s' ใน PATH หรือไม่สามารถเรียกทำงานได้(สังเกตการหายไปของ %s ซึ่งถูกแทนที่อย่างสมบูรณ์)
+(กำลังอ่านฐานข้อมูล ... (ไม่มีคำบรรยาย)(รวม %jd ไบต์)
+, มีการดัมป์หน่วยความจำตัวเลือก -%c ไม่รับค่าตัวเลือก -%c ต้องระบุค่าด้วย--%s --pending ไม่รับอาร์กิวเมนต์ที่ไม่ใช่ตัวเลือก--%s --recursive ต้องมีอาร์กิวเมนต์เป็นพาธอย่างน้อยหนึ่งพาธ--%s ต้องมีอาร์กิวเมนต์เป็นชื่อและไดเรกทอรีของแฟ้ม .deb ด้วย--%s ต้องการ <ชื่อ>--%s ต้องการ <ชื่อ> <พาธ>--%s ต้องมีอาร์กิวเมนต์เป็นชื่อแฟ้ม .deb ด้วย--%s ต้องการอาร์กิวเมนต์ <ไดเรกทอรี>--%s ต้องการอาร์กิวเมนต์ <แฟ้ม>--%s ต้องการอาร์กิวเมนต์แค่รายการเดียว--%s ต้องระบุไดเรกทอรีปลายทางด้วย
+บางที คุณควรใช้ dpkg --install ไหม?--%s ต้องการชื่อแพกเกจที่ถูกต้อง แต่ '%.250s' ไม่ใช่: %s--%s ต้องการอาร์กิวเมนต์เป็นแฟ้มแพกเกจอย่างน้อยหนึ่งแฟ้ม--%s ต้องการอาร์กิวเมนต์ที่เป็นชื่อแพกเกจอย่างน้อยหนึ่งตัว--%s ต้องการอาร์กิวเมนต์สี่ตัวตัวเลือก --%s ไม่รับค่าตัวเลือก --%s ต้องระบุค่าด้วย--%s ต้องมีอาร์กิวเมนต์เป็นเลขฐานแปดค่าบวก--%s ต้องการอาร์กิวเมนต์ที่เป็นแฟ้มส่วนย่อยตั้งแต่หนึ่งรายการขึ้นไป--%s ต้องการอาร์กิวเมนต์เป็นชื่อแฟ้ม Packages ไม่เกินหนึ่งรายการ--%s ต้องการอาร์กิวเมนต์ไม่เกินสองตัว--%s รับอาร์กิวเมนต์ไม่เกินสองตัว (.deb และไดเรกทอรี)--%s รับอาร์กิวเมนต์ตัวเดียว--%s ต้องการอาร์กิวเมนต์สองตัว--%s ไม่รับอาร์กิวเมนต์--%s ต้องการอาร์กิวเมนต์หนึ่งตัว เป็นชื่อแพกเกจ--%s รับอาร์กิวเมนต์แค่ตัวเดียว (ชื่อแฟ้ม .deb)--auto ต้องการอาร์กิวเมนต์ที่เป็นแฟ้มส่วนย่อยรายการเดียว--auto ต้องใช้ตัวเลือก --output ด้วย--compare-versions พบเครื่องหมายเปรียบเทียบที่ผิด--compare-versions รับอาร์กิวเมนต์สามตัว: <รุ่น> <การเปรียบเทียบ> <รุ่น>--search ต้องระบุอาร์กิวเมนต์เป็นแพตเทิร์นของชื่อแฟ้มอย่างน้อยหนึ่งรายการด้วย--split ต้องการอาร์กิวเมนต์ที่เป็นชื่อแฟ้มต้นฉบับ--split รับอาร์กิวเมนต์เป็นชื่อแฟ้มต้นฉบับและชื่อขึ้นต้นของปลายทางอย่างละหนึ่งรายการเท่านั้นสั่ง --update แต่ไม่มีแฟ้ม %s อยู่--update ไม่มีประโยชน์อะไรสำหรับ --remove... ทุกอย่างดูจะเรียบร้อยดี.../%s; แต่ว่า:
+<บีบอัด> จาก tar -cf<deb> คือชื่อแฟ้มของแพกเกจเดเบียน
+<cfile> คือชื่อขององค์ประกอบแฟ้มที่ใช้ควบคุมแพกเกจ
+<cfield> คือชื่อเขตข้อมูลในแฟ้ม `control' หลัก
+
+<คลายบีบอัด><ลิงก์> กับ <พาธ> จะเหมือนกันไม่ได้<ลิงก์> เป็น symlink ที่ชี้ไปยัง %s/<ชื่อ>
+  (เช่น /usr/bin/pager)
+<ชื่อ> เป็นชื่อหลักของกลุ่มลิงก์นี้
+  (เช่น pager)
+<พาธ> เป็นตำแหน่งของแฟ้มปลายทางของทางเลือกใดทางเลือกหนึ่ง
+  (เช่น /usr/bin/less)
+<ความสำคัญ> เป็นตัวเลข; ทางเลือกที่มีตัวเลขนี้สูง จะได้รับความสำคัญสูงในโหมดอัตโนมัติ
+ 
+<file descriptor ของแฟ้มสถานะและความคืบหน้าของแพกเกจ><ช่องแสดงข้อผิดพลาดมาตรฐาน><อินพุตมาตรฐาน><เอาต์พุตมาตรฐาน>กำลังเพิ่ม '%s'
+ยอมให้ติดตั้งแพกเกจที่ขัดแย้งกันทางเลือก %s ไม่มีการเปลี่ยนแปลง เพราะตัวเลือก %s ไม่มีอยู่ติดตั้งแฟ้มค่าตั้งที่ขาดหายเสมอใช้แฟ้มค่าตั้งใหม่เสมอโดยไม่ต้องถามใช้แฟ้มค่าตั้งเดิมเสมอโดยไม่ต้องถามมีอีกโพรเซสหนึ่งล็อคฐานข้อมูลไว้เขียน และอาจกำลังเปลี่ยนแปลงข้อมูลอยู่
+ปัญหาบางอย่างต่อไปนี้อาจเกิดจากสาเหตุดังกล่าว
+สถาปัตยกรรมกำลังยืนยันแหล่งต้นตอของ %s ...
+คำสั่ง:
+  --add <เจ้าของ> <กลุ่ม> <โหมด> <พาธ>
+                           เพิ่มรายการ <พาธ> รายการใหม่เข้าในฐานข้อมูล
+  --remove <พาธ>           ลบ <พาธ> ออกจากฐานข้อมูล
+  --list [<glob-pattern>]  แสดงรายชื่อ override ปัจจุบันในฐานข้อมูล
+
+คำสั่ง:
+  --check-supported                ตรวจสอบว่า dpkg ที่มีอยู่รองรับการสะกิดหรือไม่
+
+คำสั่ง:
+  --install <ลิงก์> <ชื่อ> <พาธ> <ความสำคัญ>
+    [--slave <ลิงก์> <ชื่อ> <พาธ>] ...
+                           เพิ่มกลุ่มของแฟ้มทางเลือกในระบบ
+  --remove <ชื่อ> <พาธ>      ลบ <พาธ> ออกจากกลุ่มแฟ้มทางเลือก <ชื่อ>
+  --remove-all <ชื่อ>        ลบกลุ่ม <ชื่อ> ออกจากระบบแฟ้มทางเลือก
+  --auto <ชื่อ>              กำหนดให้ลิงก์หลัก <ชื่อ> เข้าสู่โหมดอัตโนมัติ
+  --display <ชื่อ>           แสดงข้อมูลเกี่ยวกับกลุ่ม <ชื่อ>
+  --query <ชื่อ>             เหมือน --display <ชื่อ> แต่แสดงในแบบที่เครื่องแจงอ่านได้
+  --list <ชื่อ>              แสดงปลายทางทั้งหมดของกลุ่ม <ชื่อ>
+  --get-selections         แสดงรายชื่อแฟ้มทางเลือกหลักพร้อมสถานะ
+  --set-selections         อ่านสถานะของแฟ้มทางเลือกจากอินพุตมาตรฐาน
+  --config <ชื่อ>            แสดงทางเลือกทั้งหมดของกลุ่ม <ชื่อ> และให้ผู้ใช้เลือก
+                           ว่าจะใช้ทางเลือกไหน
+  --set <ชื่อ> <พาธ>         กำหนดให้ <พาธ> เป็นทางเลือกสำหรับ <ชื่อ>
+  --all                    เรียก --config กับแฟ้มทางเลือกทั้งหมด
+
+คำสั่ง:
+  -s|--split <file> [<prefix>]     ตัดแบ่งแพกเกจ
+  -j|--join <part> <part> ...      รวมส่วนย่อยเข้าด้วยกัน
+  -I|--info <part> ...             แสดงข้อมูลเกี่ยวกับส่วนย่อย
+  -a|--auto -o <complete> <part>   สะสมส่วนย่อยโดยอัตโนมัติ
+  -l|--listq                       แสดงรายชื่อส่วนย่อยที่รออยู่
+  -d|--discard [<filename> ...]    ล้างส่วนย่อยที่รออยู่ทิ้ง
+
+คำสั่ง:
+  [--add] <file>           เพิ่มการเบนแฟ้ม
+  --remove <file>          ลบการเบนแฟ้ม
+  --list [<glob-pattern>]  แสดงการเบนแฟ้ม
+  --listpackage <file>     แสดงแพกเกจที่เบนแฟ้มนี้
+  --truename <file>        แสดงแฟ้มที่เบนไป
+
+ตัวกระทำเปรียบเทียบสำหรับ --compare-versions ได้แก่
+  lt le eq ne ge gt       (ถือว่ารุ่นที่ไม่มีเป็นรุ่นที่เก่ากว่าทุกรุ่น);
+  lt-nl le-nl ge-nl gt-nl (ถือว่ารุ่นที่ไม่มีเป็นรุ่นที่ใหม่กว่าทุกรุ่น);
+  < << <= = >= >> >       (เพื่อให้เหมือนกับรูปแบบการใช้ในแฟ้ม control เท่านั้น)
+
+แฟ้มค่าตั้ง '%s'
+แฟ้มค่าตั้ง '%s' (แฟ้มจริงคือ '%s')
+ตั้งค่าแพกเกจใดก็ตามที่อาจช่วยให้ติดตั้งแพกเกจนี้ได้กำลังถอนคืนค่าตั้งของ %s (%s) ...
+กำลังถอนคืนค่าตั้งของ %s (%s) เพื่อให้สามารถถอดถอน %s (%s) ได้ ...
+เครื่องมือสอบถามข้อมูล %s ในชุดโปรแกรมจัดการแพกเกจของเดเบียน รุ่น %s
+เครื่องมือสะกิดแพกเกจ %s ของเดเบียน รุ่น %s
+%s ของเดเบียน รุ่น %s
+แบ็กเอนด์จัดการแพกเกจ `%s' ของเดเบียน รุ่น %s
+โปรแกรมจัดการแพกเกจ `%s' ของเดเบียน รุ่น %s
+เครื่องมือตัดแบ่ง/รวมแพกเกจ `%s' ของเดเบียน; รุ่น %s
+ลบ %s แล้ว
+ความขึ้นต่อกันและข้อขัดแย้งระหว่างแพกเกจคำบรรยายต้องการ=Unknown/Install/Remove/Purge/Hold
+| สถานะ=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ ปัญหา?=(ไม่มี)/Reinst-required (สถานะ,ปัญหา: พิมพ์ใหญ่=แย่)
+ไม่ต้องใช้การกระทำ I/O แบบปลอดภัยเมื่อแตกแพกเกจเกิดข้อผิดพลาดขณะประมวลผล:
+สถานะการจบการทำงาน:
+  0 = OK
+  1 = สำหรับ --auto แฟ้มไม่ใช่ส่วนย่อย
+  2 = มีปัญหา
+แฟ้ม `%.250s' ไม่ใช่ส่วนย่อยของแพกเกจแบ่งส่วน
+การกำหนดรูปแบบ:
+  รูปแบบ คือข้อความที่จะแสดงสำหรับแต่ละแพกเกจ รูปแบบสามารถใช้อักขระหลีกมาตรฐาน
+  คือ \n (ขึ้นบรรทัดใหม่), \r (ปัดแคร่) หรือ \\ (backslash) ได้ สามารถ
+  อ้างถึงข้อมูลของแพกเกจได้ด้วยตัวแปรแทนเขตข้อมูลในรูป ${ตัวแปร[;ความกว้าง]}
+  การแสดงเขตข้อมูลจะเรียงชิดขวาเสมอ นอกจากจะใช้ความกว้างเป็นลบ จึงจะเรียง
+  ชิดซ้าย
+ข้อมูลความคืบหน้าทั่วไปที่เป็นประโยชน์จะข้ามคำสั่งลบรายการเบนแฟ้ม '%s' ที่ยังมีแพกเกจอื่นใช้ร่วมกันอยู่
+จะข้ามคำสั่งเปลี่ยนชื่อแฟ้ม '%s' ซึ่งเป็นของแพกเกจ '%s' ที่มีการเบนแฟ้ม
+ปรับข้อมูลแพกเกจจำนวน %d แพกเกจเรียบร้อยแล้ว
+พล่ามทุกเรื่องอย่างน่ารำคาญติดตั้งแพกเกจแม้จะไม่ผ่านการตรวจสอบแหล่งต้นตอติดตั้งแพกเกจแม้จะทำให้แพกเกจอื่นพังกำลังติดตั้งรุ่นใหม่ของแฟ้มค่าตั้ง %s ...
+การเรียกและผลลัพธ์ของสคริปต์ผู้ดูแลแพกเกจมีแฟ้มขยะหลงเหลืออยู่ในไดเรกทอรีสะสมส่วนย่อย:
+จะคง '%s' ไว้
+ความขึ้นต่อกันและข้อขัดแย้งระหว่างแพกเกจอย่างละเอียดพล่ามเกี่ยวกับเรื่องอย่างไดเรกทอรี dpkg/info ด้วยแสดงผลลัพธ์สำหรับแฟ้มค่าตั้งแต่ละแฟ้มอย่างละเอียดแสดงผลลัพธ์สำหรับการประมวลผลแต่ละแฟ้มอย่างละเอียดแสดงการสะกิดอย่างละเอียดมีแพกเกจ %s ถูกแตกมากกว่าหนึ่งชุดในการทำงานครั้งนี้ !
+ จะตั้งค่าแพกเกจนี้เพียงครั้งเดียวเท่านั้น
+ชื่อไม่มีการเบน '%s' จึงไม่มีการลบรายการใด
+สังเกต: PATH ของ root ควรมี /usr/local/sbin, /usr/sbin และ /sbin ด้วยไม่มีอะไรจะตั้งค่าเสนอการแทนที่แฟ้มค่าตั้งที่ไม่มีรุ่นใหม่ตัวเลือก:
+  --admindir=<ไดเรกทอรี>            ใช้ <ไดเรกทอรี> แทน %s
+  --by-package=<แพกเกจ>            กำหนดแพกเกจผู้สะกิด (มักกำหนดโดย dpkg)
+  --await                          แพกเกจจำเป็นต้องรอคอยการประมวลผล
+  --no-await                       ไม่มีแพกเกจไหนต้องรอคอยการประมวลผล
+  --no-act                         แค่ทดสอบเท่านั้น - ไม่ต้องเปลี่ยนแปลงจริง
+
+ตัวเลือก:
+  --depotdir <ไดเรกทอรี>            ใช้ <ไดเรกทอรี> แทน %s/%s
+  -S|--partsize <ขนาด>             ใช้หน่วย KiB สำหรับ -s (ค่าปริยายคือ 450)
+  -o|--output <แฟ้ม>                แฟ้มผลลัพธ์สำหรับ -j (ค่าปริยายคือ
+                                     <แพกเกจ>_<รุ่น>_<สถาปัตยกรรม>.deb)
+  -Q|--npquiet                     ไม่ต้องบ่นถ้า -a ไม่ใช่ส่วนย่อย
+  --msdos                          ใช้ชื่อแฟ้มในรูปแบบ 8.3
+
+แสดงผลลัพธ์สำหรับแฟ้มค่าตั้งแต่ละแฟ้มแสดงผลลัพธ์สำหรับการประมวลผลแต่ละแฟ้มเขียนทับแฟ้มที่เบนอยู่ด้วยฉบับที่ไม่ได้เบนเขียนทับแฟ้มของแพกเกจอื่นเขียนทับไดเรกทอรีของแพกเกจด้วยแฟ้มของแพกเกจอื่นPATH ขาดโปรแกรมสำคัญ ซึ่งน่าจะเป็นปัญหาไม่ได้ตั้งค่า PATHแพกเกจ %s ถูกกำหนดให้คงรุ่นไว้ จะไม่ทำอะไรกับแพกเกจดังกล่าว ใช้ตัวเลือก --force-hold ถ้าจะบังคับให้ทำ
+แพกเกจ %s ถูกระบุมากกว่าหนึ่งครั้ง จะดำเนินการเพียงครั้งเดียวเท่านั้น
+แพกเกจ `%s' ไม่มีแฟ้มใดเลย (!)
+แพกเกจที่ยังประกอบรวมไม่เสร็จ:
+เก็บส่วนย่อย %d ของแพกเกจ %s แล้ว (ยังต้องการอีก พาธเขตข้อมูล Pre-Dependsกำลังเตรียมแตก %s ...
+ความสำคัญดำเนินการแม้กับแพกเกจที่ผิดสถาปัตยกรรมหรือไม่ระบุสถาปัตยกรรมดำเนินการแม้กับแพกเกจที่ผิดรุ่นกำลังประมวลผลการสะกิดสำหรับ %s (%s) ...
+หยุดทำงานเพราะเกิดข้อผิดพลาดมากเกินไป
+กำลังลบแฟ้มค่าตั้งของ %s (%s) ...
+กำลังประกอบแพกเกจ %s เข้าด้วยกันจากส่วนย่อย %d ส่วน: บันทึกข้อมูลเกี่ยวกับ %s จาก %s
+ถอดถอนแพกเกจจำเป็นถอดถอนแพกเกจที่ต้องการการติดตั้งซ้ำกำลังถอดถอน %s (%s) ...
+กำลังลบ '%s'
+แทนที่แพกเกจด้วยรุ่นที่เก่ากว่าถูกแทนที่โดยแฟ้มในแพกเกจติดตั้งใหม่ของ %s (%s) ...
+กำลังแทนที่ข้อมูลแพกเกจที่มี โดยใช้ %s
+กำลังแทนที่แฟ้มในแพกเกจเก่าของ %s (%s) ...
+กำลังเลือกแพกเกจ %s ที่เดิมไม่ได้เลือก
+การเลือกบังคับทุกรายการกำลังตั้งค่า %s (%s) ...
+แสดงการสะกิดอย่างละเอียดน่ารำคาญข้ามบรรทัดที่ไม่ถูกต้อง: %sข้ามทางเลือก %s ที่ไม่รู้จักกำลังข้ามแพกเกจ %s ที่ไม่ได้เลือก
+กำลังตัดแบ่งแพกเกจ %s ออกเป็น %d ส่วน: สถานะแพกเกจต่อไปนี้กำลังรอคอยการประมวลผลการสะกิดที่ได้เรียกไปยังแพกเกจอื่นไว้ คุณสามารถสั่งให้ประมวลผลการสะกิดดังกล่าวได้ โดยใช้ dselect หรือ dpkg --configure --pending (หรือ dpkg --triggers-only):
+แพกเกจต่อไปนี้ยังอยู่ในสภาพยุ่งเหยิง อันเนื่องมาจากปัญหาร้ายแรงขณะติดตั้ง
+จึงต้องติดตั้งซ้ำ เพื่อให้แพกเกจเหล่านี้ (และแพกเกจอื่นที่ต้องใช้แพกเกจดังกล่าว)
+สามารถใช้การได้:
+แพกเกจต่อไปนี้ขาดแฟ้มควบคุม 'list' (รายชื่อแฟ้ม) ในฐานข้อมูล
+และจำเป็นต้องติดตั้งใหม่:
+แพกเกจต่อไปนี้ขาดแฟ้มควบคุม 'md5sums' (ผลรวมตรวจสอบ) ในฐานข้อมูล
+และจำเป็นต้องติดตั้งใหม่:
+แพกเกจต่อไปนี้ถูกตั้งค่าไว้ครึ่งๆ กลางๆ ซึ่งอาจเป็นเพราะปัญหาบางอย่างขณะตั้งค่าในครั้งแรก
+จึงควรพยายามตั้งค่าใหม่อีกครั้งด้วยคำสั่ง dpkg --configure <package>
+หรือใช้เมนูตั้งค่าใน dselect:
+แพกเกจต่อไปนี้ถูกติดตั้งไว้ครึ่งๆ กลางๆ อันเนื่องมาจากปัญหาบางอย่างขณะติดตั้ง
+จึงอาจต้องติดตั้งใหม่อีกครั้งเพื่อให้เสร็จสมบูรณ์ หรืออาจถอดถอนโดยใช้ dselect
+หรือ dpkg --remove ก็ได้:
+แพกเกจต่อไปนี้ไม่ได้ระบุสถาปัตยกรรม:
+แพกเกจต่อไปนี้มีสถาปัตยกรรมที่ไม่ถูกต้อง:
+แพกเกจต่อไปนี้มีสถาปัตยกรรมต่างถิ่นที่ไม่รู้จัก ซึ่งจะทำให้เกิดปัญหาความขึ้นต่อกันระหว่างแพกเกจ
+ในระบบจัดการแพกเกจชั้นบนต่างๆ ปัญหานี้สามารถแก้ไขได้ด้วยการลงทะเบียนสถาปัตยกรรมต่างถิ่นนั้น
+ด้วยคำสั่ง dpkg --add-architecture:
+แพกเกจต่อไปนี้ถูกสะกิดอยู่ แต่ยังไม่ได้ประมวลผล คุณสามารถสั่งให้ประมวลผลการสะกิดดังกล่าวได้ โดยใช้ dselect หรือ dpkg --configure --pending (หรือ dpkg --triggers-only):
+แพกเกจต่อไปนี้ถูกแตกไว้แล้ว แต่ยังไม่ได้ตั้งค่า
+จึงต้องตั้งค่าแพกเกจเหล่านี้ด้วยคำสั่ง dpkg --configure
+หรือใช้เมนูตั้งค่าใน dselect เพื่อให้แพกเกจดังกล่าวใช้การได้:
+มีตัวเลือก %d ตัวสำหรับทางเลือก %s (ซึ่งจัดเตรียม %s)ไม่มีโปรแกรมที่จัดเตรียม %sมีทางเลือกเพียงทางเดียวในกลุ่มลิงก์ %s (ซึ่งจัดเตรียม %s): %sนี่เป็นซอฟต์แวร์เสรี กรุณาอ่านเงื่อนไขการแจกจ่ายได้จาก GNU General Public License
+รุ่น 2 หรือใหม่กว่า ซอฟต์แวร์นี้ *ไม่มี* การรับประกันใดๆ
+การเรียกและการประมวลผลการสะกิดพยายามติดตั้ง/ถอดถอนแม้จะไม่ใช่ rootเปลี่ยนปัญหาความขึ้นต่อกันทั้งหมดของแพกเกจให้เป็นแค่คำเตือนเปลี่ยนปัญหาความขึ้นต่อรุ่นของแพกเกจให้เป็นแค่คำเตือนพิมพ์ `exit' เมื่อเสร็จแล้ว
+พิมพ์ dpkg --help เพื่อดูวิธีการติดตั้งและถอดถอนแพกเกจ [*]
+ใช้ 'apt' หรือ `aptitude' หากต้องการการจัดการแพกเกจแบบเป็นมิตรกับผู้ใช้
+พิมพ์ dpkg -Dhelp เพื่อดูรายชื่อแฟล็กต่างๆ สำหรับการดีบั๊กของ dpkg
+พิมพ์ dpkg --force-help เพื่อดูตัวเลือกการ force ต่างๆ
+พิมพ์ dpkg-deb --help เพื่อดูวิธีจัดการแฟ้ม *.deb
+
+ตัวเลือกที่มีเครื่องหมาย [*] จะแสดงข้อมูลมากมาย - ควรไปป์ไปยังคำสั่ง `less' หรือ `more'พิมพ์ dpkg-deb --help เพื่อดูวิธีจัดการแฟ้ม *.deb;
+พิมพ์ dpkg --help เพื่อดูวิธีติดตั้งและถอดถอนแพกเกจพิมพ์ dpkg-split --help เพื่อดูวิธีใช้พิมพ์ dpkg-trigger --help เพื่อดูวิธีใช้โปรแกรมนี้กำลังแตก %s (%s) ...
+กำลังแตก %s (%s) ทับ (%s) ...
+กำลังปรับข้อมูลแพกเกจที่มี โดยใช้ %s
+วิธีใช้: %s [<ตัวเลือก> ...] <คำสั่ง>
+
+ใช้ '%s --help' เพื่อดูข้อมูลวิธีใช้โปรแกรมใช้ 'apt' หรือ `aptitude' หากต้องการการจัดการแพกเกจแบบเป็นมิตรกับผู้ใช้
+ใช้ --help เพื่อดูวิธีเบนแฟ้มใช้ --help เพื่อดูวิธีบังคับค่า stat ของแฟ้มใช้ --help เพื่อดูวิธีสอบถามข้อมูลแพกเกจใช้คำตอบปริยายสำหรับคำถามเกี่ยวกับแฟ้มค่าตั้งใหม่ถ้ามี
+โดยไม่ต้องถาม ถ้าไม่มีค่าปริยายกำหนดไว้ ก็จะถามคำถาม
+ยกเว้นมีการกำหนดตัวเลือก confold หรือ confnew ด้วยรุ่นdpkg รุ่นที่รองรับ%s ยังไม่ได้ตั้งค่า
+ กรุณาสั่ง 'dpkg --configure dpkg' แล้วจึงลองใหม่
+เมื่อจะเพิ่มการเบนแฟ้ม ตัวเลือกปริยายคือ --local และ --divert <ชื่อเดิม>.distrib
+เมื่อจะลบการเบนแฟ้ม ถ้าระบุ --package หรือ --local และ --divert ก็ต้องระบุให้ตรงกันด้วย
+สคริปต์ preinst/postrm ของแพกเกจควรระบุ --package และ --divert เสมอ
+จะถอดถอน %s (%s) หรือถอดถอนอย่างสมบูรณ์ ...
+[ปริยาย=N][ปริยาย=Y][ไม่มีค่าปริยาย]admindir ต้องอยู่ภายใต้ instdir เพื่อที่ dpkg จะทำงานได้อย่างถูกต้องจะตั้งค่า '%s' ด้วย (ต้องการโดย '%s')ทางเลือก %s (ซึ่งเป็นส่วนหนึ่งของกลุ่มลิงก์ %s) ไม่มีอยู่ จะลบออกจากรายชื่อแฟ้มทางเลือกทางเลือก %s ไม่สามารถเป็นรายการหลัก: เป็นรายการลูกของ %s อยู่ทางเลือก %s ไม่สามารถเป็นรายการลูกของ %s: เป็นทางเลือกหลักอยู่ทางเลือก %s ไม่สามารถเป็นรายการลูกของ %s: เป็นรายการลูกของ %s อยู่ทางเลือก %s สำหรับ %s ไม่ได้ลงทะเบียนไว้ จะไม่ลบทางเลือก %s สำหรับ %s ไม่ได้ลงทะเบียนไว้ จะไม่กำหนดค่าลิงก์ทางเลือก %s ถูกจัดการโดย %s อยู่แล้วลิงก์ทางเลือก %s ถูกจัดการโดย %s (รายการลูกของ %s) อยู่แล้วลิงก์ทางเลือกไม่ได้เป็นลิงก์สัมบูรณ์อย่างที่ควรจะเป็น: %sชื่อทางเลือก (%s) จะมี '/' หรือช่องว่างไม่ได้พาธทางเลือกไม่ได้เป็นพาธสัมบูรณ์อย่างที่ควรจะเป็น: %sชื่อแพกเกจ '%s' กำกวม และมีการติดตั้งมากกว่าหนึ่งชุดมีรายการ override สำหรับ '%s' อยู่ก่อนแล้ว แต่มีการระบุ --force ดังนั้นเราจะละเลยข้อสังเกตนี้มีรายการ override สำหรับ '%s' อยู่ก่อนแล้ว ขอยกเลิกการเบนแฟ้มใดๆ ของ %sการเบนแฟ้มใดๆ ของ %s ไปยัง %sชื่อสมาชิก ar '%s' ยาวเกินไปขนาดของสมาชิก ar %jd ใหญ่เกินไป<ว่างเปล่า><ไม่ปรากฏ><ไม่ทราบ>สถาปัตยกรรม '%s' ไม่สามารถใช้ได้: %sสถาปัตยกรรม '%s' สงวนไว้ และไม่สามารถเพิ่มได้แพกเกจ '%.250s' มีสมาชิกข้อมูลควบคุมสองชุด ขอเลิกล้มแพกเกจ '%s' มีสมาชิก '%.*s' ที่มาก่อนกำหนดก่อน '%s' ขอเลิกล้มแพกเกจ '%s' ใช้การบีบอัดที่ไม่รู้จักสำหรับสมาชิก '%.*s' ขอเลิกล้มแพกเกจมีออบเจกต์ `%.255s' เป็นชนิด 0x%x ซึ่งไม่รู้จักขนาดของสมาชิกส่วนควบคุมของแพกเกจแพกเกจมีเลขรุ่นของรูปแบบไม่ถูกต้อง: %sแพกเกจมีขนาดของสมาชิกส่วนควบคุมผิดรูปแบบ '%s'แพกเกจไม่มีอักขระขึ้นบรรทัดใหม่ในข้อมูลส่วนหัวสมาชิกส่วนหัวของข้อมูลเกี่ยวกับแพกเกจแพกเกจเป็นรูปแบบรุ่น %d.%d กรุณาใช้ dpkg-deb รุ่นใหม่เลขรุ่นรหัสของแพกเกจข้อมูลส่วนหัวของสมาชิกแพกเกจหมายเลขส่วนย่อยของแพกเกจออฟเซ็ตของส่วนย่อยของแพกเกจหมายเลขส่วนย่อยของแพกเกจขนาดรวมของแพกเกจโหมดอัตโนมัติการปรับข้อมูลแบบอัตโนมัติของ %s/%s ถูกปิดไว้ จะไม่แตะต้องกำลังรอคอยการประมวลผลการสะกิดในแพกเกจอื่นพบบรรทัดเปล่าในค่าของเขตข้อมูล '%.*s'มีปัญหาเนื่องจากถอดถอนหรือติดตั้งไม่สำเร็จมีปัญหาเนื่องจาก postinst ผิดพลาดไม่สามารถติดตั้งตัวเลือก %s ที่ไม่รู้จักไม่สามารถ mmap แฟ้มข้อมูลแพกเกจ `%.255s'ไม่สามารถลบสคริปต์ postrm เก่าไม่สามารถ stat แฟ้มข้อมูลแพกเกจ `%.255s'ไม่สามารถเพิ่มแฟ้มสมาชิก ar (%s) เข้าใน '%s': %sไม่สามารถเพิ่มส่วนย่อย '%s' ของแพกเกจตัดแบ่งต่อท้าย '%s': %sไม่สามารถเขียนต่อท้าย '%s'ไม่สามารถปิดไปป์ของเครื่องมือคลายบีบอัดไม่สามารถคำนวณแฮช MD5 สำหรับแฟ้ม '%s': %sไม่สามารถคำนวณแฮช MD5 ของแฟ้ม tar '%.255s': %sไม่สามารถแปลงลำดับ multibyte '%s' ให้เป็น wide character ได้ไม่สามารถแปลงสตริงแบบ multibyte '%s' ให้เป็นสตริงแบบ wide character ได้ไม่สามารถคัดลอก '%s' เข้าในแพกเกจ '%s': %sไม่สามารถคัดลอก '%s' ไปยัง '%s': %sไม่สามารถคัดลอกสมาชิกของแพกเกจจาก '%s' ไปยังไปป์ของเครื่องมือคลายบีบอัด: %sไม่สามารถคัดลอกข้อมูลที่แตกออกมาจาก '%.250s' ไปยัง '%.250s': %sไม่สามารถเบนไดเรกทอรีไม่สามารถเบนแฟ้ม '%s' เข้าหาตัวเองได้ไม่สามารถแตกแฟ้มควบคุม '%s' จาก '%s': %sไม่สามารถแตกส่วนย่อย '%s' ของแพกเกจตัดแบ่ง: %sไม่สามารถเปิด handle สำหรับฉลากระบบรักษาความปลอดภัยได้ไม่สามารถเปิด `%.255s' (ใน `%.255s')ไม่สามารถเปิดแฟ้มส่วนย่อยของแฟ้มจัดเก็บ `%.250s'ไม่สามารถเปิดช่องแจ้งสถานะการรักษาความปลอดภัยได้ไม่สามารถอ่านไดเรกทอรีสารสนเทศไม่สามารถลบ `%.250s'ไม่สามารถลบสถาปัตยกรรม '%s' ซึ่งกำลังใช้งานอยู่ในฐานข้อมูลไม่สามารถลบสถาปัตยกรรม '%s' ที่ไม่ต่างถิ่นได้ไม่สามารถลบแฟ้มค่าตั้งสำรองเก่า `%.250s' (ของ `%.250s')ไม่สามารถลบแฟ้มค่าตั้งเก่า `%.250s' (= `%.250s')ไม่สามารถลบรายชื่อแฟ้มเก่าไม่สามารถเปลี่ยนชื่อ '%s' เป็น '%s'ไม่สามารถติดตั้งสิ่งที่ต้องใช้ขณะติดตั้ง %.250s (ต้องการเพราะ %.250s)ไม่สามารถตรวจข้อมูลไดเรกทอรี `%.255s'ไม่สามารถตรวจข้อมูลไดเรกทอรีปรับข้อมูล`%.255s'ไม่พบวิธีที่จะติดตั้งสิ่งที่ต้องใช้ขณะติดตั้ง:
+ %sไม่สามารถกำหนดบริบทรักษาความปลอดภัยสำหรับออบเจกต์แฟ้ม '%s' ได้ไม่สามารถกำหนดบริบทการทำงานในระบบรักษาความปลอดภัยสำหรับสคริปต์ผู้ดูแลแพกเกจไม่สามารถข้ามสมาชิกส่วนควบคุมของแพกเกจใน '%s': %sไม่สามารถข้ามสมาชิกของแพกเกจใน '%s': %sไม่สามารถข้ามแฟ้ม '%.255s' (ถูกแทนที่หรือไม่นับรวมหรือไม่?) จากไปป์: %sไม่สามารถข้ามอักขระเติมช่องว่างในแฟ้ม '%.255s': %sไม่สามารถข้ามข้อมูลส่วนหัวของแพกเกจที่ตัดแบ่ง '%s': %sไม่สามารถ stat `%.255s' (ใน `%.255s')ไม่สามารถ stat แฟ้ม '%s'ไม่สามารถตัดไบต์ศูนย์ทั้งหลายข้างท้ายที่อาจจะมีจาก dpkg-deb: %sห้ามใช้อักขระ `%c' (ใช้ตัวอักษร ตัวเลข และอักขระ `%s' ได้เท่านั้น)ข้อมูลบีบอัดเสียหายไม่พบแฟ้มค่าตั้ง `%.250s' ในแพกเกจแฟ้มค่าตั้ง `%.250s' ไม่สามารถ stat ได้แฟ้มค่าตั้ง '%s' ไม่ใช่แฟ้มปกติเครื่องมือแสดงความต่างของเนื้อหาแฟ้มค่าตั้งชื่อแฟ้มค่าตั้ง '%s' มีช่องว่างท้ายบรรทัดชื่อแฟ้มค่าตั้ง '%s' ซ้ำกันชื่อแฟ้มค่าตั้ง '%s' ยาวเกินไป หรือไม่มีอักขระขึ้นบรรทัดใหม่ปิดท้ายเชลล์สำหรับแฟ้มค่าตั้งข้อผิดพลาดในค่าตั้ง: %s:%d: %sการกระทำขัดแย้งกันระหว่าง -%c (--%s) และ -%c (--%s)มีการเบนแฟ้มขัดแย้งกันโดยเกี่ยวข้องกับ `%.250s' หรือ `%.250s'แพกเกจขัดแย้งกัน - จะไม่ติดตั้ง %.250sจะพิจารณาถอนคืนค่าตั้งของ %s ซึ่งจะมีปัญหาเพราะการ%s ...จะพิจารณาถอนคืนค่าตั้งของแพกเกจจำเป็น
+ %s เพื่อให้สามารถ%sจะพิจารณาลบ %s เพื่อใช้ %s แทน ...ไดเรกทอรีควบคุมมีการกำหนดสิทธิ์ %03lo ซึ่งไม่ถูกต้อง (ต้องมีค่า >=0755 และ <=0775)ไดเรกทอรีควบคุมไม่ได้เป็นไดเรกทอรีไม่มีแฟ้มควบคุม '%s' อยู่แฟ้มควบคุม '%s' ของแพกเกจ '%s' มีรายการชื่อแฟ้มที่ว่างเปล่าแฟ้มควบคุม '%s' ของแพกเกจ '%s' ขาดอักขระขึ้นบรรทัดใหม่ที่ท้ายบรรทัดแฟ้มควบคุมมีอักขระ %cสมาชิกส่วนควบคุมแฟ้มฟอร์แมต '%s' ของฐานข้อมูลสารสนเทศแพกเกจเสียหายไม่สามารถเปิดแฟ้มปูม `%s': %sไม่สามารถ stat แฟ้มเก่า '%.250s' จึงจะไม่มีการลบแฟ้มดังกล่าว: %sไม่สามารถเปิด `%i' สำหรับสตรีมไม่รู้จักทางเลือกปัจจุบัน %s จะเปลี่ยนไปใช้ %s สำหรับกลุ่มลิงก์ %sพบวงวนขณะประมวลผลการสะกิด:
+ สายของแพกเกจที่การสะกิดเป็นหรืออาจเป็นตัวการ:สมาชิกส่วนข้อมูลมีปัญหาความขึ้นต่อกันระหว่างแพกเกจ - จะทิ้งไว้โดยไม่ประมวลผลการสะกิดมีปัญหาความขึ้นต่อกันระหว่างแพกเกจ - จะทิ้งไว้โดยไม่ตั้งค่ามีปัญหาความขึ้นต่อกันของแพกเกจ - จะไม่ถอดถอนปัญหาความขึ้นต่อกันระหว่างแพกเกจทำให้ไม่สามารถตั้งค่า %s:
+%sปัญหาความขึ้นต่อกันระหว่างแพกเกจทำให้ไม่สามารถประมวลผลการสะกิดสำหรับ %s:
+%sมีปัญหาความขึ้นต่อกันของแพกเกจทำให้ไม่สามารถถอดถอน %s ได้:
+%sจะทิ้งลิงก์ลูกที่เลิกใช้แล้ว %s (%s)การเบนแฟ้มโดย %s จาก: %s
+การเบนแฟ้มโดย %s ไปยัง: %s
+การเบนแฟ้ม %s โดย %sการเบนแฟ้ม %s ไปยัง %s โดย %sdivert-to ห้ามมีอักขระขึ้นบรรทัดใหม่ถูกเบนแฟ้มโดย %s ไปยัง: %s
+เสร็จ
+จะปรับรุ่น %.250s ลง จาก %.250s เป็น %.250sไม่มีบันทึกว่า dpkg ถูกติดตั้งไว้ จึงไม่สามารถตรวจสอบการรองรับ%s ได้!
+การสะกิดที่รอคอย `%.255s' ซ้ำกันมีการสะกิดด้วยแฟ้มซ้ำกันสำหรับชื่อแฟ้ม `%.250s' และแพกเกจ `%.250s'พาธ %s ซ้ำการสะกิดที่คั่งค้าง `%.255s' ซ้ำกันลิงก์ลูก %s ซ้ำชื่อรายการลูก %s ซ้ำค่าของเขตข้อมูล `%s' ซ้ำกันค่าของเขตข้อมูลกำหนดเอง `%.*s' ซ้ำกันชื่อเขตข้อมูลว่างเปล่าได้รับข้อความเปล่าจาก fgets ขณะอ่าน conffilesไม่อนุญาตให้ใช้ชื่อการสะกิดที่ว่างเปล่า epochepoch ในเลขรุ่นเป็นค่าลบepoch ในเลขรุ่นไม่ใช่ตัวเลขepoch ในเลขรุ่นมีค่ามากเกินไปข้อผิดพลาดเกิดข้อผิดพลาดขณะตรวจสอบ '%s'เกิดข้อผิดพลาดขณะปิด %.250sเกิดข้อผิดพลาดขณะปิดแฟ้มค่าตั้ง `%.255s'เกิดข้อผิดพลาดขณะปิด/เขียน `%.255s'เกิดข้อผิดพลาดขณะสร้างอุปกรณ์ `%.255s'เกิดข้อผิดพลาดขณะสร้างไดเรกทอรี `%.255s'เกิดข้อผิดพลาดขณะสร้าง hard link `%.255s'เกิดข้อผิดพลาดขณะสร้างแฟ้มสำรองใหม่ '%s'เกิดข้อผิดพลาดขณะสร้างไปป์ `%.255s'เกิดข้อผิดพลาดขณะสร้าง symbolic link `%.255s'เกิดข้อผิดพลาดขณะพยายามทำให้แน่ใจว่า `%.250s' ไม่มีอยู่เกิดข้อผิดพลาดขณะเรียกทำงาน hook '%s' โดยจบการทำงานด้วยรหัส %dเกิดข้อผิดพลาดขณะจัดรูปแบบข้อความลงในตัวแปร varbufมีข้อผิดพลาดในรูปแบบการแสดง: %sเกิดข้อผิดพลาดขณะติดตั้งแฟ้มใหม่ '%s'เกิดข้อผิดพลาดขณะเปิดแฟ้ม conffilesเกิดข้อผิดพลาดขณะเปิดไดเรกทอรีค่าตั้ง '%s'เกิดข้อผิดพลาดขณะประมวลผลแฟ้มจัดเก็บ %s (--%s):
+ %sเกิดข้อผิดพลาดขณะประมวลผลแพกเกจ %s (--%s):
+ %sเกิดข้อผิดพลาดขณะอ่าน %.250sเกิดข้อผิดพลาดขณะอ่าน%sจากแฟ้ม %.255sเกิดข้อผิดพลาดขณะอ่านแฟ้ม conffilesเกิดข้อผิดพลาดขณะอ่านจากไปป์ของ dpkg-debเกิดข้อผิดพลาดขณะอ่านแฟ้มชะลอการสะกิด `%.255s'เกิดข้อผิดพลาดขณะลบแฟ้มสำรองเก่า '%s'เกิดข้อผิดพลาดขณะกำหนดเจ้าของของ `%.255s'เกิดข้อผิดพลาดขณะกำหนดเจ้าของของ symlink `%.255s'เกิดข้อผิดพลาดขณะกำหนดการอนุญาตสิทธิ์ของ `%.255s'เกิดข้อผิดพลาดขณะลงเวลาของ `%.255s'เกิดข้อผิดพลาดขณะพยายามเปิด %.250sเกิดข้อผิดพลาดขณะเลิกดักสัญญาณ %s: %s
+เกิดข้อผิดพลาดขณะเขียน '%s'เกิดข้อผิดพลาดขณะเขียน `%s'เกิดข้อผิดพลาดขณะเขียนลงใน '%s'เกิดข้อผิดพลาดขณะเขียนลงในรายชื่อสถาปัตยกรรมเกิดข้อผิดพลาดขณะเขียน stderr พบข้อผิดพลาดนี้ก่อนถามเกี่ยวกับแฟ้มค่าตั้งจองหน่วยความจำไม่สำเร็จไม่สามารถจองหน่วยความจำสำหรับรายการใหม่ในรายชื่อแพกเกจที่ล้มเหลว: %sเปลี่ยนไดเรกทอรีไปยัง `%.255s' ไม่สำเร็จเปลี่ยนเข้าไดเรกทอรีไม่สำเร็จไม่สามารถ chroot ไปยัง `%.250s'ไม่สามารถปิดหลังจากอ่าน: `%.255s'สร้างไดเรกทอรีไม่สำเร็จสร้างไปป์ไม่สำเร็จdup ไม่สำเร็จสำหรับ fd %ddup ไม่สำเร็จสำหรับ std%sไม่สามารถ fstat แฟ้มสมาชิก ar (%s)fstat แพกเกจไม่สำเร็จไม่สามารถ fstat แฟ้ม diversionsไม่สามารถ fstat แฟ้ม statoverrideสร้างแฟ้มชั่วคราว (%s) ไม่สำเร็จเปิดแฟ้มค่าตั้ง '%.255s' เพื่ออ่านไม่สำเร็จ: %sไม่สามารถเปิดแฟ้ม diversionsไม่สามารถเปิดแฟ้มข้อมูลแพกเกจ `%.255s' เพื่ออ่านไม่สามารถเปิดแฟ้ม statoverrideไม่สามารถเปิดแฟ้มรายชื่อการสะกิดที่สนใจ `%.250s'อ่านไม่สำเร็จอ่าน `%.255s' ไม่สำเร็จ (ใน `%.255s')อ่านแพกเกจ `%.255s' ไม่สำเร็จไม่สามารถลบแฟ้มปรับข้อมูล %.255s ที่รวมอยู่ไม่สามารถลบแฟ้มปรับข้อมูล %.255sกรอแฟ้มชั่วคราว (%s) กลับไม่สำเร็จไม่สามารถกรอแฟ้มรายชื่อการสะกิดที่สนใจ `%.250s' กลับเลื่อนตำแหน่งไม่สำเร็จไม่สามารถ stat (ชี้ตามลิงก์) symlink `%.250s' ที่มีอยู่ไม่สามารถ stat (ชี้ตามลิงก์) ปลายทาง symlink ใหม่ `%.250s' สำหรับ symlink `%.250s'ไม่สามารถ stat แฟ้มชั่วคราว (%s)ลบแฟ้มชั่วคราว (%s) ไม่สำเร็จ: %sเขียนไม่สำเร็จไม่สามารถเขียนระเบียนฐานข้อมูล %s เกี่ยวกับ '%.50s' ลงใน '%.250s'ไม่สามารถเขียนรายละเอียดของ `%.50s' ลงใน `%.250s'เขียนชื่อแฟ้มลงไปป์ไปยัง tar ไม่สำเร็จ (%s)fgets คืนข้อความเปล่าจาก `%.250s'ชื่อเขตข้อมูล '%.*s' ขึ้นต้นด้วยยัติภังค์ไม่ได้ชื่อเขตข้อมูล `%.*s' ต้องตามด้วยทวิภาค (:)ความกว้างเขตข้อมูลอยู่นอกช่วงที่ใช้งานแฟ้ม '%.250s' มีเลขรุ่นของรูปแบบผิดพลาด: %sแฟ้ม `%.250s' เสียหาย - ขาด %.250sแฟ้ม `%.250s' เสียหาย - ค่า MD5 checksum `%.250s' ไม่ถูกต้องแฟ้ม '%.250s' เสียหาย - เลขรหัสในข้อมูลส่วนหัวของแพกเกจไม่ถูกต้องแฟ้ม `%.250s' เสียหาย - หมายเลขส่วนย่อยของแพกเกจเป็นค่าที่ไม่สามารถใช้ได้แฟ้ม `%.250s' เสียหาย - ตัวเลขผิด (รหัส %d) ที่ %sแฟ้ม `%.250s' เสียหาย - รหัสเอกลักษณ์ผิดพลาดที่ท้ายข้อมูลส่วนหัวชิ้นแรกแฟ้ม `%.250s' เสียหาย - ค่ารหัสเอกลักษณ์ที่ข้อมูลส่วนหัวส่วนที่สองไม่ถูกต้องแฟ้ม '%.250s' เสียหาย - จำนวนส่วนย่อยของแพกเกจเป็นค่าที่ไม่สามารถใช้ได้แฟ้ม `%.250s' เสียหาย - อักขระเติมช่องว่างใช้ไม่ได้ (รหัส %d)แฟ้ม `%.250s' เสียหาย - ขาด newline หลัง %.250sแฟ้ม '%.250s' เสียหาย - ไม่มีอักขระขีดทับระหว่างหมายเลขส่วนย่อยของแพกเกจแฟ้ม `%.250s' เสียหาย - มีอักขระรหัสศูนย์ในหมวดข้อมูลแพกเกจแฟ้ม `%.250s' เสียหาย - สมาชิกที่สองไม่ใช่สมาชิกที่เป็นข้อมูลแฟ้ม `%.250s' เสียหาย - ขนาดไม่ถูกต้องใน quoted part numberแฟ้ม `%.250s' เสียหาย - สั้นเกินไปแฟ้ม `%.250s' เสียหาย - จำนวนส่วนย่อยไม่ถูกต้องใน quoted sizeแฟ้ม '%.250s' อยู่ในรูปแบบรุ่น %d.%d คุณต้องใช้ dpkg-split รุ่นใหม่กว่านี้แฟ้ม `%.250s' ไม่ใช่ส่วนย่อยของแฟ้มจัดเก็บแฟ้ม '%s' เสียหาย: ตัวเลขออกนอกช่วงใช้งานที่ %sแฟ้ม `%s' ไม่ใช่ส่วนย่อยของแพกเกจ
+พบฟอร์แมตแฟ้มที่ไม่รู้จักแฟ้มดูเหมือนจะเป็นแพกเกจที่ได้รับความเสียหายเพราะการดาวน์โหลด
+ ในโหมด ASCIIชื่อแฟ้มห้ามมีอักขระขึ้นบรรทัดใหม่ระเบียนการสะกิดด้วยแฟ้มมีการกล่าวอ้างถึงชื่อแพกเกจที่ใช้ไม่ได้ `%.250s' (ในรายการสนใจแฟ้ม `%.250s'): %.250sชื่อแฟ้ม "%s" ไม่ใช่พาธเต็มแฟ้ม `%.250s' และ `%.250s' ไม่ใช่ส่วนย่อยของแฟ้มเดียวกันแฟ้มรายชื่อแฟ้มของแพกเกจ `%.250s' มีรายการชื่อแฟ้มที่ว่างเปล่าแฟ้มรายชื่อแฟ้มของแพกเกจ '%.250s' ขาดอักขระขึ้นบรรทัดใหม่ที่ท้ายบรรทัดแฟ้มรายชื่อแฟ้มของแพกเกจ `%.250s' ขาดหายไป จะถือว่าแพกเกจไม่ได้ติดตั้งแฟ้มใดในระบบจะบังคับติดตั้งทางเลือก %s ซ้ำใหม่ เพราะกลุ่มลิงก์ %s เสียอยู่fork ไม่สำเร็จเลขรุ่นของรูปแบบแพกเกจมีค่าขยะต่อท้ายเลขรุ่นของรูปแบบแพกเกจไม่มีจุดเลขรุ่นของรูปแบบแพกเกจเลขรุ่นของรูปแบบแพกเกจไม่มีเลขรุ่นหลักเลขรุ่นของรูปแบบแพกเกจไม่มีเลขรุ่นรองข้อมูลส่วนหัว ar สำหรับ '%s' ที่สร้างไปนั้นไม่ถูกต้องข้อมูลส่วนหัวยาวเกินไป ทำให้ส่วนย่อยยาวเกินไปด้วย ชื่อแพกเกจหรือเลขรุ่นคงยาวแบบผิดปกติ
+หรือมีความผิดปกติอย่างอื่น ขอเลิกล้มจะละเลยคำเตือน %d รายการเกี่ยวกับแฟ้มควบคุมจะละเลยการพังของแพกเกจ อาจดำเนินการต่อได้!จะละเลยความขัดแย้งระหว่างแพกเกจ อาจดำเนินการต่อได้!จะละเลยปัญหาความขึ้นต่อกันของแพกเกจในการ%s:
+%sจะละเลยปัญหาของสิ่งที่ต้องใช้ขณะติดตั้ง!จะข้ามคำสั่งถอดถอน %.250s ซึ่งไม่ได้ติดตั้งไว้จะข้ามคำสั่งถอดถอน %.250s ซึ่งเหลือแต่แฟ้มค่าตั้งอยู่ในระบบ
+ ใช้ --purge ถ้าต้องการลบแฟ้มค่าตั้งด้วยชื่อสถาปัตยกรรมผิดรูปแบบในการระบุชื่อ '%s:%s': %sชื่อแพกเกจที่รอคอย '%.255s' ไม่ถูกต้อง: %.250sชื่อแพกเกจผิดรูปแบบที่บรรทัด %d: %.250sชื่อแพกเกจผิดรูปแบบในการสะกิดที่รอคอย `%.255s': %sชื่อแพกเกจผิดรูปแบบในการระบุชื่อ '%s%s%s': %sชื่อการสะกิดที่คั่งค้าง `%.255s' ใช้ไม่ได้: %sฟอร์แมตของฐานข้อมูลสารสนเทศ (%d) เป็นค่าปลอมหรือใหม่เกินไป ลองติดตั้ง dpkg รุ่นที่ใหม่กว่านี้แฟ้มสารสนเทศ %s/%s ไม่มีความเชื่อมโยงกับแพกเกจใดติดตั้ง %.250sติดตั้งอยู่การติดตั้ง %.250s จะทำให้ %.250s พัง และ
+ ไม่ได้อนุญาตให้มีการถอนคืนค่าตั้ง (--auto-deconfigure ช่วยได้)การติดตั้ง %.250s จะทำให้ซอฟต์แวร์ที่มีอยู่พังได้ข้อผิดพลาดภายใน (บั๊ก)อักขระ '%c' ผิดข้อกำหนดในแฟ้มจัดเก็บ '%.250s' ที่สมาชิกขนาดของ '%.16s'ใช้อักขระ '%c' ไม่ได้ในความกว้างเขตข้อมูลพบอักขระห้ามใช้ในเลขฉบับแก้ไขพบอักขระห้ามใช้ในเลขรุ่นค่าระดับการบีบอัดผิดพลาดสำหรับ -%c: %ldพารามิเตอร์ของการบีบอัดผิดพลาด: %sรุ่นของรูปแบบ deb ไม่ถูกต้อง: %sค่าจำนวนเต็มผิดพลาดสำหรับ -%c: '%.250s'ค่าจำนวนเต็มผิดพลาดสำหรับ --%s: `%.250s'ชื่อการสะกิด `%.250s' ผิดรูปแบบ (ในการสะกิดที่สนใจสำหรับแพกเกจ `%.250s')ชื่อแพกเกจผิดรูปแบบ `%.250s' ในแฟ้มชะลอการสะกิด `%.250s'สถานะผิดพลาดชื่อการสะกิด `%.255s' ไม่ถูกต้อง: %.250sพบบรรทัดที่ไม่ได้ปิดท้ายขณะพยายามอ่าน %sพบบรรทัดที่ยาวเกินไปหรือไม่ได้ปิดท้ายขณะพยายามอ่าน %sลิงก์ %s เป็นทั้งลิงก์หลักและลิงก์ลูกการเบนแฟ้มเป็นการภายในจาก: %s
+การเบนแฟ้มเป็นการภายในของ %sการเบนแฟ้มเป็นการภายในของ %s ไปยัง %sการเบนแฟ้มเป็นการภายในไปยัง: %s
+ถูกเบนแฟ้มเป็นการภายในไปยัง: %s
+ชื่อแฟ้มยาวสคริปต์ผู้ดูแลแพกเกจ `%.50s' มีการกำหนดสิทธิ์ %03lo ซึ่งไม่ถูกต้อง (ต้องมีค่า >=0555 และ <=0775)สคริปต์ผู้ดูแลแพกเกจ `%.50s' ไม่ใช่แฟ้มธรรมดาหรือ symlinkสคริปต์ผู้ดูแลแพกเกจ `%.50s' ไม่สามารถ stat ได้malloc ไม่สำเร็จ (%zu ไบต์)โหมดสั่งเองแฟ้มหลักลิงก์หลักอาจมีปัญหาในการถอดถอน %s เพราะแพกเกจดังกล่าวจัดเตรียม %s ...เป็นข้อความว่างเปล่าไม่ได้ใช้หน่วยความจำเต็มขีดจำกัดแล้วdivert-to ไม่ตรง
+  ขณะลบ `%s'
+  พบ `%s'package ไม่ตรง
+  ขณะลบ `%s'
+  พบ `%s'ขาดปีกกาปิดมีทั้งแพกเกจที่ไม่สามารถติดตั้งร่วมกันได้ และที่ติดตั้งร่วมกันได้ ปะปนกันอยู่ โดยมากมาจากการปรับรุ่นจาก dpkg ที่ไม่เป็นทางการหลากสถาปัตยกรรมรายการ Conflicts และ Replaces หลายรายการมีแพกเกจที่ไม่สามารถติดตั้งร่วมกันได้ติดตั้งซ้ำกันอยู่หลายตัว โดยมากมาจากการปรับรุ่นจาก dpkg ที่ไม่เป็นทางการมีรายการ statoverride หลายรายการสำหรับ '%.250s'ใช้เรียกจากสคริปต์ผู้ดูแลแพกเกจเท่านั้น (หรือโดยใช้ตัวเลือก --by-package)ต้องขึ้นต้นด้วยอักษรหรือตัวเลขต้องขึ้นต้นด้วยอักษรหรือตัวเลขชื่อ %s เป็นทั้งรายการหลักและรายการลูกต้องมีตัวเลือกระบุการกระทำด้วยพบอักขระขึ้นบรรทัดใหม่ในชื่อเขตข้อมูล `%.*s'ห้ามใช้อักขระขึ้นบรรทัดใหม่ในแฟ้มสำหรับ update-alternatives (%s)ไม่มีทางเลือกสำหรับ %sไม่มีรายการ override อยู่ไม่มีข้อมูลแพกเกจใน `%.255s'ไม่มีแพกเกจชื่อ `%s' ติดตั้งไว้ ไม่สามารถตั้งค่าได้ไม่พบแพกเกจที่ตรงกับ %sไม่พบพาธที่ตรงกับแพตเทิร์น %sไม่ได้ %s เป็นแพกเกจจำเป็น จะไม่ถอนคืนค่าตั้ง
+ เพื่อให้สามารถ%sไม่ได้ ไม่สามารถดำเนินการ%s ต่อ (--auto-deconfigure ช่วยได้):
+%sจะไม่ตรวจสอบเนื้อหาของพื้นที่ควบคุมไม่ได้ติดตั้งไม่ได้ติดตั้งแต่แฟ้มค่าตั้งยังอยู่จะไม่ลบ %s เนื่องจากไม่ใช่ symlinkจะไม่แทนที่ %s ด้วยลิงก์ไม่มีอะไรต่อท้ายทวิภาคในเลขรุ่นชื่อแพกเกจว่างเปล่าในรายการคั่นด้วยจุลภาคของตัวเลือก --%s '%.250s'จำนวนส่วนย่อยของแพกเกจตัวเลือก '--%s' เลิกใช้แล้ว แพกเกจที่ไม่มีในระบบแล้วจะถูกเก็บกวาดทิ้งโดยอัตโนมัติแฟ้มค่าตั้งเดิม '%.250s' เป็นไดเรกทอรีว่างเปล่า (และตอนนี้ถูกลบไปแล้ว)แฟ้มเก่า '%.250s' เป็นแฟ้มเดียวกับแฟ้มใหม่หลายแฟ้ม! (ทั้ง '%.250s' และ '%.250s')แพกเกจรุ่นเก่ามีแฟ้ม info ชื่อยาวเกินไป ซึ่งขึ้นต้นด้วย `%.250s'ใช้เลขรุ่นตายตัวได้เท่านั้นในเขตข้อมูล '%s'เปิดองค์ประกอบ `%.255s' (ใน %.255s) ไม่สำเร็จ โดยได้ผลลัพธ์ที่ไม่คาดคิดหน่วยความจำไม่พอสำหรับสร้างรายการเก็บกวาดหน่วยความจำไม่พอสำหรับสร้างรายการเก็บกวาดที่มีอาร์กิวเมนต์หลายตัวหน่วยความจำไม่พอสำหรับสร้างบริบทข้อผิดพลาดอันใหม่จะข้ามปัญหาไปเพราะมีการเปิดตัวเลือก --force:แพกเกจ %.250s ถูกติดตั้งและตั้งค่าเรียบร้อยแล้วแพกเกจ %.250s ไม่พร้อมสำหรับการตั้งค่า
+ ไม่สามารถตั้งค่าได้ (สถานะปัจจุบัน `%.250s')แพกเกจ %.250s ไม่พร้อมสำหรับการประมวลผลการสะกิด
+ (สถานะปัจจุบัน `%.250s' และไม่มีการสะกิดที่คั่งค้างอยู่)แพกเกจ %s %s ไม่สามารถตั้งค่าได้ เพราะ %s เป็นคนละรุ่นกัน (%s)แพกเกจ %s ไม่สามารถตั้งค่าได้ เพราะ %s ยังไม่พร้อม (สถานะปัจจุบัน '%.250s')แพกเกจ %s มีแฟ้ม list เป็นข้อมูลควบคุมแพกเกจ %s ต้องติดตั้งซ้ำ แต่จะถอดถอนตามที่คุณสั่งแพกเกจ %s ต้องติดตั้งซ้ำ จะไม่ถอดถอนแพกเกจ %s ถูกกำหนดให้คงรุ่นไว้ แต่จะดำเนินการต่อตามที่คุณสั่งไม่มีแพกเกจ '%s'แพกเกจ '%s' ไม่ได้ติดตั้งไว้แพกเกจ `%s' ไม่ได้ติดตั้งไว้ และไม่มีข้อมูลสำหรับแพกเกจนี้สถาปัตยกรรมของแพกเกจสถาปัตยกรรมของแพกเกจ (%s) ไม่ตรงกับของระบบ (%s)แพกเกจมีแฟ้มข้อมูลควบคุมชื่อยาวเกินไป (ขึ้นต้นด้วย `%.250s')ข้อมูลควบคุมของแพกเกจมีไดเรกทอรี `%.250s'การสั่ง rmdir กับ `%.250s' ในข้อมูลควบคุมของแพกเกจ ไม่ได้ตอบว่าไม่ใช่ไดเรกทอรีการแตกข้อมูลควบคุมของแพกเกจแพกเกจเบนแฟ้มของแพกเกจอื่นไปยัง: %s
+การแยกเอาค่าเขตข้อมูลของแพกเกจผลรวม MD5 ของแฟ้มแพกเกจการแตกส่วนระบบแฟ้มของแพกเกจแพกเกจอยู่ในสถานะ %s แต่มีการสะกิดที่รอคอยอยู่แพกเกจอยู่ในสถานะ %s แต่มีการสะกิดที่คั่งค้างอยู่แพกเกจอยู่ในสถานะไม่สมบูรณ์อย่างมาก คุณควรติดตั้งแพกเกจซ้ำ
+ ก่อนที่จะพยายามถอดถอนแพกเกจอยู่ในสถานะไม่ครบเต็มอย่างย่ำแย่ คุณควรติดตั้งแพกเกจนี้ซ้ำ
+ ก่อนที่จะพยายามตั้งค่าต่อไปชื่อแพกเกจห้ามมีอักขระขึ้นบรรทัดใหม่ชื่อแพกเกจชื่อแพกเกจมีอักขระที่ไม่ใช่ตัวอักษรพิมพ์เล็ก ตัวเลข หรือ `-+.'การตรวจสอบลายเซ็นในแพกเกจเลขรุ่นของแพกเกจส่วนย่อย %d ขาดหายแฟ้มส่วนย่อย `%.250s' ไม่ใช่แฟ้มปกติขนาดของส่วนย่อยใหญ่เกินไป หรือไม่ใช่ค่าบวกขนาดของส่วนย่อยต้องมีค่าอย่างน้อย %dKiB (เพื่อให้เก็บข้อมูลส่วนหัวได้)ผ่าน
+แปะพาธห้ามมีอักขระขึ้นบรรทัดใหม่มีปัญหาของสิ่งที่ต้องใช้ขณะติดตั้ง - จะไม่ติดตั้ง %.250sลำดับความสำคัญลำดับความสำคัญออกนอกช่วงใช้งานความสำคัญต้องเป็นตัวเลขลำดับความสำคัญของ %s ออกนอกช่วงใช้งาน: %sลำดับความสำคัญของ %s: %sเกิดข้อผิดพลาดขณะอ่าน %.250sเกิดข้อผิดพลาดขณะอ่าน `%.250s'เกิดข้อผิดพลาดขณะอ่านแฟ้มค่าตั้ง `%.255s'การอ่านข้อมูลผิดพลาดที่อินพุตมาตรฐานเกิดข้อผิดพลาดในการอ่าน stdin ที่คำถามเกี่ยวกับแฟ้มค่าตั้งไม่สามารถอ่านแฟ้มข้อมูลแพกเกจ '%.255s'ขณะอ่านแฟ้มข้อมูลแพกเกจ '%s': %sเกิดข้อผิดพลาดขณะอ่านแฟ้ม statoverride '%.250s'แฟ้มแพกเกจที่ประกอบรวมแล้วเกี่ยวกับ %s ที่บรรจุ %s: มีปัญหาของสิ่งที่ต้องใช้ขณะติดตั้ง:
+%sเกี่ยวกับ %s ซึ่งบรรจุ %s:
+%sถอดถอน %.250sกำลังลบสถาปัตยกรรม '%s' ซึ่งกำลังใช้งานอยู่ในฐานข้อมูลกำลังลบทางเลือกที่เลือกแบบสั่งเอง - จะเปลี่ยน %s เข้าสู่โหมดอัตโนมัติการเปลี่ยนชื่อทำให้ต้องเขียนทับ `%s' ด้วย
+  แฟ้ม `%s' ที่เป็นคนละแฟ้ม ซึ่งไม่อนุญาตrename: ลบลิงก์เดิม '%s' ซึ่งซ้ำกันการดำเนินการที่สั่งต้องอาศัยสิทธิ์ผู้ดูแลระบบคำสั่ง rm เพื่อทำความสะอาดค้นหาแล้ว แต่ไม่พบแพกเกจ (แฟ้มซึ่งตรงกับรูปแบบ *.deb)<ไม่ทราบ>กำลังกำหนดทางเลือกแบบอัตโนมัติสำหรับ %sพบข้อมูลแพกเกจหลายชุด ซึ่งต้องมีเพียงชุดเดียวเท่านั้นคำสั่งเชลล์สำหรับย้ายแฟ้มข้ามการสร้าง %s เพราะแฟ้ม %s (ซึ่งอยู่ในกลุ่มลิงก์ %s) ที่เชื่อมโยงอยู่ไม่มีอยู่แฟ้มลูกลิงก์ลูกลิงก์ลูกซ้ำกับลิงก์หลัก %sชื่อรายการลูกแฟ้มต้นฉบับ `%.250s' ไม่ใช่แฟ้มปกติประกอบรวมแพกเกจที่ตัดแบ่งแฟ้ม statoverride มีบรรทัดว่างเปล่าแฟ้ม statoverride ขาดอักขระขึ้นบรรทัดใหม่ที่ท้ายบรรทัดสถานะเครื่องมือบันทึกปูมของสถานะจะตัด / ที่ท้ายชื่อโพรเซสย่อย %s จบการทำงานโดยคืนค่าสถานะข้อผิดพลาด %dขนาดของ symbolic link '%.250s' ได้เปลี่ยนจาก %jd ไปเป็น %zdไวยากรณ์ผิดพลาดในแฟ้มรายชื่อการสะกิดด้วยแฟ้ม `%.250s'พบรูปแบบผิดพลาดในแฟ้ม statoverrideรับอาร์กิวเมนต์แค่ตัวเดียว คือชื่อของการสะกิดเป้าหมายเป็นไดเรกทอรี - ไม่สามารถข้ามการตรวจสอบแฟ้มควบคุมมีแฟ้มส่วนย่อย %d หลายฉบับ - อย่างน้อยก็ `%.250s' และ `%.250s'ไม่มีสคริปต์ในแพกเกจรุ่นใหม่ - ขอเลิกล้มนี่เป็นแพกเกจจำเป็น ไม่ควรถอดถอนหากต้องการกลับสู่การปรับข้อมูลแบบอัตโนมัติ ใช้คำสั่ง '%s --auto %s'มีข้อผิดพลาดมากเกินไป ขอหยุดพบบรรทัดยาวเกินไป หรือขาดอักขระขึ้นบรรทัดใหม่ใน `%.250s'ไวยากรณ์ผิดพลาดในแฟ้มรายชื่อการสะกิดที่สนใจ `%.250s'; ชื่อแพกเกจผิดรูปแบบ `%.250s': %.250sชื่อการสะกิดมีอักขระที่ห้ามใช้ยังไม่มีระเบียนการสะกิดถูกสะกิดอยู่แฟ้มข้อมูลการสะกิด `%.250s' มีไวยากรณ์ของการสะกิดผิดพลาดในชื่อการสะกิด `%.250s': %.250sแฟ้มข้อมูลการสะกิดมีคำสั่ง `%.250s' ที่ไม่รู้จักแฟ้มข้อมูลการสะกิดมีคำสั่งผิดไวยากรณ์ยังไม่ได้สร้างไดเรกทอรีข้อมูลการสะกิดมีการสะกิดเป็นวงวน ขอยกเลิกจะลองใช้สคริปต์จากแพกเกจใหม่แทน ...กำลังพยายามเขียนทับ '%.250s' ซึ่งอยู่ในแพกเกจ %.250s %.250s เช่นกันกำลังพยายามเขียนทับ `%.250s' ซึ่งเป็นฉบับเบนของ `%.250s'กำลังพยายามเขียนทับ `%.250s' ซึ่งเป็นฉบับเบนของ `%.250s' (แพกเกจ: %.100s)กำลังพยายามเขียนทับไดเรกทอรี '%.250s' ในแพกเกจ %.250s %.250s ด้วยสิ่งที่ไม่ใช่ไดเรกทอรีกำลังพยายามเขียนทับ '%.250s' ที่ใช้ร่วมกัน ซึ่งต่างจากอีกฉบับของแพกเกจ %.250sมีการระบุคำสั่งสองคำสั่ง: --%s และ --%sไม่สามารถเปิด (ซ้ำ) แฟ้มส่วนย่อยข้อมูลเข้า `%.250s'ไม่สามารถเปลี่ยนเจ้าของแฟ้มปลายทาง '%.250s'ไม่สามารถตรวจสอบการมีอยู่ของ `%.250s'ไม่สามารถตรวจสอบสถานะการล็อคของแฟ้ม '%s'ไม่สามารถตรวจสอบการมีอยู่ของแพกเกจ `%.250s'ไม่สามารถกำหนดเจ้าของของ symlink สำรองสำหรับ `%.255s'ไม่สามารถเก็บกวาดสิ่งตกค้างเกี่ยวกับ `%.255s' ก่อนที่จะติดตั้งอีกรุ่นได้ไม่สามารถปิดแฟ้ม '%s'ไม่สามารถปิดแฟ้มใหม่ `%.250s'ไม่สามารถปิดแฟ้มชะลอการสะกิดแฟ้มใหม่ `%.250s'ไม่สามารถปิดสถานะใหม่ของ `%.250s'ไม่สามารถสร้าง `%.255s'สร้าง `%.255s' ไม่สำเร็จ (ระหว่างดำเนินการ `%.255s')ไม่สามารถสร้างแฟ้ม '%s'ไม่สามารถสร้างแฟ้มใหม่ '%.250s'ไม่สามารถสร้างไดเรกทอรีชั่วคราวไม่สามารถสร้างไดเรกทอรีสถานะของการสะกิด `%.250s'ไม่สามารถลบแฟ้มควบคุม `%.250s'ไม่สามารถลบไดเรกทอรีเก่า '%.250s': %sไม่สามารถลบแฟ้มสะสมส่วนย่อย `%.250s' ที่ใช้แล้วไม่สามารถล้าง `%.250s' ทิ้งไม่สามารถเรียกทำงาน %s (%s)ไม่สามารถเติม %.250s ด้วยอักขระเติมช่องว่างไม่สามารถ flush %.250s หลังจากเติมอักขระเติมช่องว่างไม่สามารถ flush แฟ้ม '%s'ไม่สามารถ flush แฟ้มใหม่ '%.250s'ไม่สามารถ flush สถานะใหม่ของ `%.250s'ไม่สามารถ stat แฟ้มต้นฉบับไม่สามารถ fsync สถานะใหม่ของ `%.250s'ไม่สามารถนำ file descriptor ของไดเรกทอรี '%s' มาใช้ได้ไม่สามารถกำหนดให้เพิกเฉยต่อสัญญาณ %s ก่อนเรียกทำงาน %.250s ได้ไม่สามารถติดตั้ง `%.250s' ในชื่อ `%.250s'ไม่สามารถติดตั้งแฟ้ม info `%.250s' (ที่น่าจะเป็น) ฉบับใหม่ไม่สามารถติดตั้งแฟ้มควบคุมใหม่ `%.250s' เป็น `%.250s'ไม่สามารถติดตั้งแฟ้มชะลอการสะกิดแฟ้มใหม่ `%.250s'ไม่สามารถติดตั้งรุ่นใหม่ของ `%.255s'ไม่สามารถติดตั้งสถานะใหม่ของ `%.250s'ไม่สามารถล็อค %sไม่สามารถสร้างลิงก์สำรองของ `%.255s' ก่อนติดตั้งรุ่นใหม่ได้ไม่สามารถสร้าง symlink สำรองสำหรับ `%.255s'ไม่สามารถเปลี่ยนชื่อแฟ้ม `%.255s' ชั่วคราวเพื่อติดตั้งรุ่นใหม่ได้ไม่สามารถเปิด '%.255s'ไม่สามารถเปิดไดเรกทอรี '%s'ไม่สามารถเปิดแฟ้ม '%s'ไม่สามารถเปิดแฟ้มสะสมส่วนย่อยใหม่ `%.250s'ไม่สามารถเปิดแฟ้มผลลัพธ์ `%.250s'ไม่สามารถเปิดแฟ้มต้นฉบับ `%.250s'ไม่สามารถเปิดไดเรกทอรีควบคุมชั่วคราวไม่สามารถเปิดแฟ้มข้อมูลการสะกิด `%.250s'ไม่สามารถเปิดแฟ้มชะลอการสะกิด `%.250s'ไม่สามารถเปิดหรือสร้างแฟ้มชะลอการสะกิดแฟ้มใหม่ `%.250s'ไม่สามารถอ่านไดเรกทอรีสะสมส่วนย่อย `%.250s'ไม่สามารถอ่านแฟ้มรายชื่อการสะกิดด้วยแฟ้ม `%.250s'ไม่สามารถอ่านแฟล็กของ file descriptor สำหรับ %.250sไม่สามารถอ่านลิงก์ `%.255s'ไม่สามารถอ่านแฟ้มส่วนย่อย `%.250s'ไม่สามารถลบ '%s'ไม่สามารถลบฉบับสำรองของ '%.250s'ไม่สามารถลบแฟ้มต้นฉบับ '%s' หลังจากคัดลอกแล้วไม่สามารถลบรุ่นที่แตกใหม่ของ `%.250s'ไม่สามารถลบรุ่นที่ติดตั้งใหม่ของ `%.250s'ไม่สามารถลบรุ่นที่ติดตั้งใหม่ของ `%.250s' เพื่อติดตั้งเนื้อหาที่สำรองไว้ได้ไม่สามารถลบแฟ้ม info `%.250s' ที่เลิกใช้แล้วไม่สามารถเปลี่ยนชื่อแฟ้มสะสมใหม่ `%.250s' ไปเป็น `%.250s'ไม่สามารถเปิดแฟ้มส่วนย่อย `%.250s' ซ้ำไม่สามารถฟื้นคืนฉบับสำรองของ `%.250s'ไม่สามารถลบ '%.250s' อย่างปลอดภัยได้ไม่สามารถลบ '%.255s' อย่างปลอดภัยได้ไม่สามารถลบแฟ้มเก่า '%.250s' อย่างปลอดภัยได้: %sไม่สามารถเลื่อนไปยังต้นแฟ้ม %.250s หลังจากเติมอักขระเติมช่องว่างไม่สามารถกำหนดบัฟเฟอร์สำหรับแฟ้มฐานข้อมูล %sไม่สามารถกำหนดแฟล็ก close-on-exec สำหรับ %.250sไม่สามารถกำหนดสิทธิ์การเรียกทำงานให้กับ `%.250s'ไม่สามารถกำหนดสิทธิ์แฟ้มปลายทาง '%.250s'ไม่สามารถ setenv สำหรับสคริปต์ผู้ดูแลแพกเกจไม่สามารถ setenv สำหรับโพรเซสย่อยไม่สามารถ stat %s `%.250s'ไม่สามารถ stat %s '%.250s': %sไม่สามารถ stat `%.250s'ไม่สามารถ stat ไดเรกทอรีควบคุมไม่สามารถ stat แฟ้มค่าตั้ง `%.250s' ที่ติดตั้งในปัจจุบันไม่สามารถ stat แฟ้มค่าตั้ง '%.250s' ฉบับจัดแจกรุ่นใหม่ไม่สามารถ stat แฟ้มใหม่ `%.250s'ไม่สามารถ stat แฟ้ม `%.255s' ที่เพิ่งฟื้นคืน ก่อนที่จะติดตั้งอีกรุ่นได้ไม่สามารถ stat แฟ้มต้นทาง '%.250s'ไม่สามารถ stat แฟ้มชะลอการสะกิด `%.250s'ไม่สามารถ sync ไดเรกทอรี '%s'ไม่สามารถ sync แฟ้ม '%.250s'ไม่สามารถ sync แฟ้ม '%s'ไม่สามารถ sync แฟ้มใหม่ '%.250s'ไม่สามารถตัดท้ายเนื้อหาสถานะใหม่ของ `%.250s'ไม่สามารถปลดล็อค %sไม่สามารถเขียนแฟ้ม '%s'ไม่สามารถเขียนแฟ้มใหม่ '%.250s'ไม่สามารถเขียนแฟ้มชะลอการสะกิดแฟ้มใหม่ `%.250s'ไม่สามารถเขียนลงใน fd %d สำหรับสถานะไม่สามารถเขียนสถานะใหม่ของ `%.250s'เครื่องหมายคำพูดเปิด-ปิดไม่สมดุลกันใน '%s'เกิดข้อผิดพลาดที่ไม่คาดหมายของ bzip2มีข้อมูลที่ไม่ต้องการหลังชื่อแพกเกจและการเลือกรุ่นที่บรรทัด %dพบจุดจบแฟ้มก่อนกำหนดที่%sใน %.255sพบจุดจบแฟ้มหรือสตรีมก่อนกำหนดพบจุดจบแฟ้มก่อนกำหนดขณะพยายามอ่าน %sพบจุดจบของข้อมูลเข้าก่อนกำหนดพบจุดจบบรรทัดก่อนกำหนดหลังชื่อแพกเกจที่บรรทัด %dพบจุดจบบรรทัดก่อนกำหนดในชื่อแพกเกจที่บรรทัด %dพบจุดจบบรรทัดก่อนกำหนดในแฟ้ม statoverrideไม่รู้จักอาร์กิวเมนต์ `%s'พบนโยบายการบีบอัดที่ไม่รู้จักไม่รู้จักนโยบายของการบีบอัด '%s'!ไม่รู้จักชนิดของการบีบอัด `%s'!ไม่รู้จักรุ่นของรูปแบบ deb: '%s'ไม่รู้จักตัวเลือก force/refuse `%.*s'ไม่รู้จักตัวเลือก '%s'ไม่รู้จักตัวเลือก -%cไม่รู้จักตัวเลือก --%sไม่รู้จักรูปแบบการรายงานผลการตรวจสอบแบบ '%s'ไม่รู้จักสถานะที่ต้องการที่บรรทัด %d: %.250sแตกแล้วแต่ยังไม่ตั้งค่าพบค่าตั้งเริ่มแรกของการบีบอัดที่ไม่รองรับไม่รองรับชนิด '%s' ของการบีบอัดในการบีบอัดแบบระเบียบเดียวพบตัวเลือกที่ไม่รองรับในส่วนหัวของแฟ้มพบชนิดของการตรวจสอบความครบถ้วนที่ไม่รองรับไดเรกทอรีปรับข้อมูลมีแฟ้ม `%.250s' ซึ่งชื่อยาวเกินไป (ความยาว=%d, ค่าสูงสุด=%d)ไดเรกทอรีปรับข้อมูลมีแฟ้มซึ่งมีชื่อยาวไม่เท่ากัน (ทั้ง %d และ %d)จะปรับข้อมูลทางเลือก %s เพราะกลุ่มลิงก์ %s ได้เปลี่ยนลิงก์รายการลูกชื่อเขตข้อมูลกำหนดเอง `%.*s' สั้นเกินไปจะใช้ %s เพื่อจัดเตรียม %s (%s) ในโหมดอัตโนมัติจะใช้ %s เพื่อจัดเตรียม %s (%s) ในโหมดสั่งเองค่าของเขตข้อมูล '%s' มีบรรทัดที่ผิดรูปแบบ '%.*s'ใช้ค่าสำหรับเขตข้อมูล '%s' ไม่ได้ในบริบทนี้การตรวจสอบลายเซ็นแพกเกจ %s ล้มเหลว!การตรวจสอบลายเซ็นแพกเกจ %s ล้มเหลว แต่จะติดตั้งต่อไปตามที่คุณสั่ง<ไม่ปรากฏ>รุ่น %.250s ของ %.250s ถูกติดตั้งไว้แล้ว ขอข้ามเลขรุ่นไม่ได้ขึ้นต้นด้วยตัวเลขข้อความเลขรุ่นมีช่องว่างภายในข้อความเลขรุ่นว่างเปล่าการจัดเตรียมแบบระบุรุ่นคอยโพรเซสย่อย %s ไม่สำเร็จคำเตือนขณะอ่าน %s: %sขณะถอดถอน %.250s ปรากฏว่าไดเรกทอรี '%.250s' มีข้อมูลเหลืออยู่ จึงไม่ลบไดเรกทอรีนี้ขณะถอดถอน %.250s ปรากฏว่าไม่สามารถลบไดเรกทอรี '%.250s': %s - ไดเรกทอรีอาจเป็นจุดเมานท์หรือไม่?จะไม่ปรับรุ่น %.250s ลง จากรุ่น %.250s เป็น %.250s ขอข้ามได้ จะถอนคืนค่าตั้งของ %s (มีปัญหาเพราะ %s)ได้ จะถอดถอน %s เพื่อใช้ %s แทนคุณต้องระบุแพกเกจด้วยชื่อแพกเกจ ไม่ใช่โดยคัดลอกชื่อของแฟ้มแพกเกจมา
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/tl.gmo dpkg-1.20.7.1/po/tl.gmo
--- dpkg-1.20.7.1-orig/po/tl.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/tl.gmo	2021-06-09 18:25:15.983504999 -0500
@@ -0,0 +1,169 @@
+��	��a�=K&�.��.� ;4\�5�-�.1@$r4�/��) 9J.�'�&�356lr-�H�QA]e�f7l<�B�$; Vw5�1�#�K 5h -� !� � 5!>!,V!.�!.�!�!H"6J"(�">�"�"�"##*%#2P#-�#/�#]�#?$GD$8�$,�$�$(%::% u%-�%�%��%��&�j'�8(�(�) �),�)�)�)�)�)6*!9*[*%z*�*%�*"�*&+/+J+;a+3�+�+A�+0,&O,"v,,�,"�,5�,,-GL-�-*�-"�-..-%.)S.}.�.)�.�.�.!/!;/]/%z/%�/�/�/�/ 0#60+Z0%�0$�0�0 �01:!1\1x1�1$�1�1�12 282P2!p2�25�2 �2%3.30N3*3+�3)�344454;j4<�4:�4750V5;�5?�5$6A(6$j6!�6:�6<�6)7'57	]7"g7O�78�7*8>8V8l8"�84�8
�8 �8%9G69?~9#�97�92:YM:4�:F�:1#;;U;D�;�;&�;-<><.F<u<)�<�<&�<�<0=6B=4y=%�=%�=+�=4&>F[>@�>+�>%?15?+g?N�?*�?
@+'@,S@�@"�@*�@�@*A&0A3WA4�A)�A,�ADB*\B4�B&�B#�B#C%+C'QC.yC�C!�C4�C4D[QD,�D4�D#E,3E+`E-�E�E�E2�EB F1cF*�F6�F&�F4G1SG�G"�G�G�G(�GHS3HM�H(�H"�H!I9I`AIn�IuK@�K&�K(�KL;)LeL'�L4�L�L>�L5:M7pM/�M2�MHN;TN�N�N:�N@�NH?O>�O;�O7P=;PyP~P�P;�P^�PX@QG�Q��QzhRA�RA%S<gS�S�S)�S#T?$TOdTA�Td�TR[UR�U*V$,VNQV*�VJ�V7W/NW!~WW�Wc�WL\X]�XYY,Y?Y2LY;Y=�Y@�Yi:Z
+�Z[�ZV[#b[&�[2�[:�[*\GF\�\��\��]��^�d_'%`�M`!�`F�`FaNaZafaEwa"�a �a3b+5b3ab)�b8�b�bcO5cD�c/�cL�c$Gd2ld(�d#�d"�d9e3IeP}e&�e3�e,)fVf']fE�fC�f g0g0Hg"yg$�g'�g'�g"h+4h&`h(�h�h'�h&�h,i4Gi*|i*�i)�i'�i$jB>j�j�j�j,�j
+k(kAk`kk(�k+�k'�kEl*]l*�l"�l;�l6m2Im0|m<�m9�mB$nJgnA�nF�n;;oHwoP�o.pU@p0�p,�pK�p[@q�q/�q
+�q,�q_rEvr1�r%�rs,3s.`sC�s�s,�s,t`>tI�t4�tJu-iu]�u9�ua/v8�vF�vOwaw4yw0�w�w8�w x0;x"lx/�x�x>�xFyIey:�y7�y2"zKUzO�z8�z=*{)h{+�{2�{N�{2@|s|3�|8�|�|$}38})l}2�}+�}3�}B)~.l~3�~I�~1;K3�,�3�)�-F�4t���*Ȁ:�8.�gg�3ρO�2S�.��3��7�!�?�>Z�F��:��5�;Q�.��E��=�$@�)e�����)���i�iq�?ۆ.�"J�m�tt��|�F���B�}Z(�w�j���
��v�k���
+��E�e0
+yL[D;nd��@�Mx/�S�� �����i%�I��	��h�uH<��.�1o5�������9����#��=W\��C���-�_���*�"��Yp���O^qg�`�:	�s��cQ��$?��z����U��K�
�a�r��6�����'T7�)V2�f,{~J�&�������m�R��+���XGAt3!>���N]����4���l�8�����b��P�
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+ %d in %s:  %s (not a plain file)
+ ==> Keeping old config file as default.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %s (subprocess): %s
+'%s' field, invalid package name '%.255s': %s'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s'(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs a .deb filename argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs at least one package archive file argument--%s needs at least one package name argument--%s option does not take a value--%s option takes a value--%s takes at most two arguments (.deb and directory)--%s takes no arguments--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix; however:
+Authenticating %s ...
+Deleted %s.
+DescriptionErrors were encountered while processing:
+File '%.250s' is not part of a multipart archive.
+Installing new version of config file %s ...
+Junk files left around in the depot directory:
+More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NamePackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want Processing was halted because there were too many errors.
+Recorded info about %s from %s.
+Replacing available packages info, using %s.
+Setting up %s (%s) ...
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+Type 'exit' when you're done.
+Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Updating available packages info, using %s.
+Version[default=N][default=Y][no default]archive contained object '%.255s' of unknown type 0x%xarchive has no newlines in headerbroken due to postinst failurecan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot read info directorycannot remove '%.250s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot stat '%.255s' (in '%.255s')conffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250scontrol directory has bad permissions %03lo (must be >=0755 and <=0775)couldn't open '%i' for streamdependency problems - leaving unconfigureddependency problems - not removingdone
+duplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesepoch in version is not numbererror closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror opening conffiles fileerror reading %.250serror reading conffiles fileerror reading from dpkg-deb pipeerror setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error writing '%s'error writing to stderr, discovered before conffile promptfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfield name '%.*s' must be followed by colonfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is not an archive partfile '%s' is not an archive part
+files '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefork failedillegal package name at line %d: %.250sinstalledinvalid integer for --%s: '%.250s'maintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemay not be empty stringneed an action optionnewline in field name '%.*s'no package information in '%.255s'no package named '%s' is installed, cannot configurenot installednot installed but configs remainnothing after colon in version numberold version of package has overly-long info file name starting '%.250s'open component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentspackage %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage name has characters that aren't lowercase alphanums or '-+.'part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepassed
+pre-dependency problem - not installing %.250sread error in %.250sread error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreassembled package filerequested operation requires superuser privilegesearched, but found no packages (files matching *.deb)several package info entries found, only one allowedsource file '%.250s' not a plain filestatoverride file contains empty linesubprocess %s returned error exit status %dtarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upunable to (re)open input part file '%.250s'unable to check existence of '%.250s'unable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close updated status of '%.250s'unable to create '%.255s'unable to delete control info file '%.250s'unable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to fill %.250s with paddingunable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to read depot directory '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to stat %s '%.250s'unable to stat '%.250s'unable to stat current installed conffile '%.250s'unable to stat restored '%.255s' before installing another versionunable to truncate for updated status of '%.250s'unable to write updated status of '%.250s'unexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of line after package name at line %dunexpected end of line in package name at line %dunknown compression type '%s'!unknown force/refuse option '%.*s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)user-defined field name '%.*s' too shortversion string has embedded spacesversion string is emptywarningyou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.13
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 09:53+0200
+Last-Translator: Eric Pareja <xenos@upm.edu.ph>
+Language-Team: Tagalog <debian-tl@banwa.upm.edu.ph>
+Language: tl
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n > 1);
+
+Ang talaksang pagkaayos `%s' ay wala sa sistema.
+Iniluluklok ang bagong talaksang pagkaayos tulad ng inyong hiling.
+     Bersyon sa loob ng pakete ay pareho sa huling pagkaluklok.
+     hindi payak na talaksan   %.255s
+  %.250s (bersyon %.250s) ay iluluklok.
+  %.250s ay %s.
+  %.250s ay nakaluklok, ngunit ang bersyon nito ay %.250s.
+  %.250s ay hindi nakaluklok.
+  %.250s ay tatanggalin ang pagkaayos.
+  %.250s ay iluluklok, ngunit ito'y bersyon %.250s.
+  %.250s ay tatanggalin.
+  %.250s ay nakabuklat, ngunit hindi ito isinaayos kailanman.
+  %.250s ay nakabuklat, ngunit ito'y bersyon %.250s.
+  Ang huling bersyon ng pagkaayos ng %.250s ay %.250s.
+  %.250s ay nagbibigay ng %.250s at iluluklok.
+  %.250s ay nagbibigay ng %.250s ngunit ito'y %s.
+  %.250s ay nagbibigay ng %.250s ngunit ito'y tatanggalan ng pagkaayos.
+  %.250s ay nagbibigay ng %.250s ngunit ito'y tatanggalin.
+ %d sa loob ng %s:  %s (hindi payak na talaksan)
+ ==> Pinanatiling default ang lumang talaksang pagkaayos.
+ ==> Nagpadala ng panibagong bersyon ang nagpamudmod ng pakete.
+ ==> Ginagamit ang kasalukuyang lumang talaksan tulad ng inyong hiling.
+ ==> Gagamitin ang bagong talaksang pagkaayos bilang default.
+ ==> Ginagamit ang bagong talaksan tulad ng inyong hiling.
+ Ang default na gagawin ay iluklok ang bagong bersyon.
+ Ang default na gagawin ay gamitin ang kasalukuyang bersyon.
+ at  nagdedepende sa %s (subprocess): %s
+saklaw na `%s', imbalido na pangalan ng pakete `%.255s': %ssaklaw na `%s', walang pangalan ng pakete, o basura kung saan inaasahan ang pangalan ng paketesaklaw na `%s', tumutukoy sa `%.255s':
+ `%c' ay laos na, gamitin `%c=' o `%c%c' sa halipsaklaw na `%s', tumutukoy sa `%.255s':
+ masamang ugnayang bersyon %c%c saklaw na `%s', tumutukoy sa `%.255s':
+ nagpapahiwatig ng tiyak na pagpares sa bilang ng bersyon, mungkahing gamitin
+ ang `=' sa halipsaklaw na `%s', tumutukoy sa `%.255s':
+ halaga ng bersyon ay nag-umpisa na di-alphanumeric, mungkahing dagdagan ng
+ puwangsaklaw na `%s', tumutukoy sa `%.255s': hindi nagwakas ang bersyonsaklaw na `%s', syntax error matapos tumukoy sa paketeng `%.255s'(Pinupuna ang pagkawala ng %s, na siyang napalitan ng buo.)
+(Binabasa ang database ... (walang paglalarawan)-%c opsyon ay hindi tumatanggap ng halaga-%c opsyon ay tumatanggap ng halaga--%s --pending ay hindi tumatanggap ng argumentong hindi opsyon--%s --recursive ay nangangailangan ng hindi kukulang sa isang argumentong path--%s ay nangangailangan ng argumentong pangalan ng talaksang .deb--%s ay nangangailangan ng target directory.
+Siguro ang kailangan niyong gamitin ay dpkg --install ?--%s ay nangangailangan ng hindi kulang sa isa talaksang arkibong pakete argumento--%s ay nangangailangan ng hindi kukulang sa isa na argumentong pangalan ng pakete--%s opsyon ay hindi tumatanggap ng halaga--%s opsyon ay tumatanggap ng halaga--%s ay tumatanggap ng hindi lalabis sa dalawang argumento (.deb at directory)--%s ay hindi tumatanggap ng mga argumento--%s ay tumatanggap lamang ng isang argumento (pangalan ng talaksang .deb)--auto ay nangangailangan ng isang argumentong talaksan--auto ay ginagamit na sabay ng --output option--compare-versions maling ugnayan--compare-versions ay tumatanggap ng tatlong argumento:   <bersyon> <ugnayan> <bersyon>--search ay nangangailangan ng hindi kukulang sa isang argumentong pattern ng
+ pangalan ng talaksan--split ay nangangailangan ng argumentong pangalan ng pinagmulan na talaksan--split ay tumatanggap ng pangalan ng pinagmulan na talaksan at unlaping
+        patutunguhan; gayunpaman:
+Tinitiyak ang %s ...
+Tinanggal ang %s.
+PaglalarawanMay mga error na naganap habang nagproproseso ng:
+Hindi bahagi ng arkibong multipart ang talaksang `%.250s'.
+Iniluluklok ang bagong bersyon ng talaksang pagkaayos %s ...
+May basurang talaksan na naiwan palibot sa directory na bodega:
+Higit sa isang kopya ng paketeng %s ay nabuklat sa pagtakbong ito !
+Isasaayos ito ng isang beses lamang.
+PapangalanAng paketeng %s ay naka-hold, hindi gagalawin. Gamitin ang --force-hold upang
+ma-override.
+Nakalista ang paketeng %s ng higit sa isang beses, pinoproseso ng isang
+beses lamang.
+Walang laman ang paketeng `%s' (!)
+Hindi pa nabuong muli ang mga pakete:
+Bahaging %d ng %s pakete ay naimbak (kailangan pa Hininto ang pagproseso dahil labis ang dami ng mga error.
+Tinala ang info tungkol sa %s mula sa %s.
+Pinapalitan ang info tungkol sa magagamit na mga pakete, gamit ang %s.
+Hinahanda ang %s (%s) ...
+Ang sumusunod na mga pakete ay nagkagulo dahil sa mabigat na problema habang
+niluluklok ang mga ito. Kinakailangan mailuklok-muli ang mga ito upang sila
+(at alinmang pakete ang may dependensiya sa kanila) ay umandar ng tama:
+Ang sumusunod na mga pakete ay nakaayos na bitin, maaaring dahil sa mga
+problema sa pagsasaayos sa kanila ng unang pagkakataaon. Ang pagsasaayos
+ay dapat subukan muli gamit ang dpkg --configure <pakete> o sa opsyon ng
+pagsasaayos sa menu ng dselect:
+Ang sumusunod na mga pakete ay nakaluklok na bitin, dahil sa mga problema
+habang sila'y iniluklok. Ang pagluklok ay maaaring mabuo sa pagsubok muli;
+ang mga pakete ay maaaring tanggalin gamit ang dselect o dpkg --remove:
+Ang sumusunod na mga pakete ay nabuklat na ngunit hindi pa isinaayos.
+Kailangan silang isaayos gamit ang dpkg --configure o ang opsyon ng pagsasaayos
+sa menu ng dselect upang sila ay umandar:
+Ipasok ang `exit' kapag tapos na kayo.
+dpkg-deb --help para sa tulong tungkol sa pag-manipulate ng *.deb;
+dpkg --help para sa tulong tungkol sa pagluklok at pagtanggal ng mga pakete.dpkg-split --help para sa tulong.Ina-apdeyt ang info tungkol sa magagamit na mga pakete, gamit ang %s.
+Bersyon[default=N][default=Y][walang default]naglalaman ang arkibo ng bagay na `%.255s' ng hindi kilalang uri 0x%xwalang newline sa header ng arkibosira dahil sa kabigoang postinsthindi ma-mmap ang talaksang info ng pakete `%.255s'hindi matanggal ang lumang skriptong postrmhindi ma-stat ang talaksang info ng pakete `%.255s'hindi mabuksan ang `%.255s' (sa `%.255s')hindi mabuksan ang arkibo ng bahaging talaksang `%.250s'hindi mabasa ang info directoryhindi matanggal ang `%.250s'hindi matanggal ang lumang backup ng talaksang pagkaayos `%.250s' (ng `%.250s')hindi matanggal ang lumang talaksang pagkaayos `%.250s' (= `%.250s')hindi matanggal ang lumang listahan ng talaksanhindi maayos ang pre-dependensiya para sa %.250s (kailangan dahil sa %.250s)hindi ma-scan ang directory `%.255s'hindi ma-scan ang directory ng mga update `%.255s'hindi ma-stat ang `%.255s' (sa `%.255s')conffile `%.250s' ay wala sa paketeconffile `%.250s' ay hindi ma-statmagkatunggaling dibersyon sangkot ang `%.250s' o `%.250s'magkatunggaling mga pakete - hindi iluluklok %.250scontrol directory ay may masamang pahintulot %03lo (kailangang >=0755 at <=0775)hindi mabuksan ang `%i' para sa streamproblema sa dependensiya - iniwanang hindi nakaayosproblema sa dependensiya - hindi tatanggalintapos
+nadobleng halaga para sa saklaw na `%s'dinobleng halaga para sa pinapangalanan ng gumagamit na saklaw `%.*s'walang laman ang string mula sa fgets habang binabasa ang conffilesepoch sa bersyon ay hindi numeroerror sa pagsara %.250serror sa pagsara ng talaksang pagkaayos `%.255s'error sa pagsara/pagsulat `%.255s'error sa paglikha ng device `%.255s'error sa paglikha ng directory `%.255s'error sa paglikha ng hard link `%.255s'error sa paglikha ng pipe `%.255s'error sa paglikha ng symbolic link `%.255s'error sa paniguradong `%.250s' ay walaerror sa pagbukas ng talaksang conffileserror sa pagbasa ng %.250serror sa pagbasa ng talaksang conffileserror sa pagbasa mula sa dpkg-deb pipeerror sa pagtakda ng pagmamayari ng `%.255s'error sa pagtakda ng pagmamayari ng symlink `%.255s'error sa pagtakda ng pahintulo ng `%.255s'error sa pagtakda ng timestamp ng `%.255s'error habang sinubukang buksan ang %.250serrro sa pag-un-catch ng hudyat %s: %s
+error sa pagsulat ng `%s'error sa pagsulat sa stderr, natagpuan bago mag-prompt ng conffilebigo sa pag-chdir sa `%.255s'bigo na mag-chdir sa directorybigo sa pag-chroot sa `%.250s'bigo sa pagsara matapos ng pagbasa: `%.255s'bigo na likhain ang directorybigo sa paglikha ng pipebigo ang pag-dup para sa fd %dbigo ang pag-dup para sa std%sbigo na i-fstat ang arkibobigo sa pag-fstat ng talaksang dibersyonbigo sa pag-fstat ng talaksang statoverridebigo sa pagbukas ng talaksang dibersyonbigo sa pagbukas ng talaksang info ng pakete `%.255s' para sa pagbasabigo sa pagbukas ng talaksang statoverridebigo ang pagbasa ng `%.255s' (sa `%.255s')bigo sa pagbasa ng arkibo `%.255s'bigo sa pagtanggal ng naisamang mga talaksang update %.255sbigo sa pagtanggal ng sariling talaksang apdeyt %.255spangalan ng saklaw `%.*s' ay dapat sundan ng kolonsira ang talaksang `%.250s' - %.250s ay nawawalasira ang talaksang `%.250s' - masamang MD5 checksum `%.250s'talaksang `%.250s' ay sira - maling digit (code %d) sa %ssira ang talaksang `%.250s' - maling magic sa dulo ng unang headersira ang talaksang `%.250s' - masamang magic sa dulo ng pangalawang headersira ang talaksang `%.250s' - masamang padding karakter (code %d)sira ang talaksang `%.250s' - may kulang na newline matapos ang %.250ssira ang talaksang `%.250s' - may mga null sa seksyong infosira ang talaksang `%.250s' - pangalawang kasapi ay hindi kasaping datossira ang talaksang `%.250s' - mali ang laki para sa bilang ng bahaging nabanggitsira ang talaksang `%.250s' - masyadong maiksisira ang talaksang `%.250s' - mali ang bilang ng mga bahagi para sa nabanggit na lakiang talaksang `%.250s' ay hindi bahagi ng arkiboang talaksang `%s' ay hindi bahaging arkibo
+ang mga talaksang `%.250s' at `%.250s' ay hindi bahagi ng parehong talaksantalaksan ng listahan ng mga talaksan ng pakete `%.250s' ay naglalaman ng
+pangalan na blankobigo ang pag-forkbawal na pangalan ng pakete sa linya %d: %.250snakaluklokdi tanggap na integer para sa --%s: `%.250s'skripto ng tagapangalaga `%.50s' ay may masamang pahintulot %03lo
+(kailangang >=0555 at <=0775)skripto ng tagapangalaga `%.50s' ay hindi payak na talaksan o symlinkskripto ng tagapangalaga `%.50s' ay hindi ma-stathindi maaaring walang laman na stringkailangan ng opsyon ng gagawinnewline sa loob ng pangalan ng saklaw `%.*s'walang impormasyong pakete sa loob ng `%.255s'walang paketeng nagngapangalang `%s' na nakaluklok, hindi maisaayoshindi nakaluklokhindi nakaluklok ngunit naiwan ang pagkaayoswalang sumunod sa kolon sa bilang ng bersyonlumang bersyon ng pakete ay may sobrang-haba na pangalan ng talaksang info 
+nagsisimula `%.250s'pagbukas ng bahaging `%.255s' (ng %.255s) bigo sa hindi inaasahang paraannagkulang ng memory para sa bagong entry ng paglinisnagkulang ng memory para sa bagong entry ng paglinis na maraming argumentonakaluklok at nakaayos na ang paketeng %.250shindi handa na isaayos ang paketeng %.250s
+ hindi maisaayos (kasalukuyang kalagayan `%.250s')arkitektura ng pakete (%s) ay hindi lapat sa sistema (%s)naglalaman ang pakete ng sobrang-haba na pangalan ng talaksang control info
+(nagsisimula `%.50s')control info ng pakete ay naglaman ng directory `%.250s'control info ng pakete rmdir ng `%.250s' hindi nagsabing hindi ito dirpangalan ng pakete ay may mga karakter na hindi maliit na titik, numero o `-+.'bahaging %d ay nawawalatalaksang bahagi `%.250s' ay hindi payak na talaksanlaki ng bahagi ay labis ng laki o hindi positibopasado
+problemang pre-dependensiya - hindi iluluklok ang %.250serror sa pagbasa sa %.250serror sa pagbasa ng talaksang pagkaayos `%.255s'error sa pagbasa ng standard inputerror sa pagbasa ng stdin sa prompt ng conffilebinuo muli ang talaksang paketekailangan ng pribilehiyong superuser ang hiniling na operasyonnaghanap, ngunit walang nahanap na pakete (talaksang pumares sa *.deb)may ilang pinasok na info tungkol sa pakete na nahanap, iisa lamang dapatpinagmulan na talaksan `%.250s' ay hindi payak na talaksannaglalaman ng blankong linya ang talaksang statoverridenagbalik ang subprocess %s ng error exit status %dang target ay directory - hindi malaktawan ang pagsuri ng talaksang controlmay iba't ibang bersyon ng bahaging %d - kabilang dito ang `%.250s' at `%.250s'walang skripto sa bagong bersyon ng pakete - sumusuko nahindi mabuksan (muli) ang input ng bahaging talaksan `%.250s'hindi matiyak ang pagkakaroon ng `%.250s'hindi matiyak na mayroong arkibong `%.250s'hindi ma-chown ang backup symlink para sa `%.255s'hindi malinis ang kalat sa paligid ng `%.255s' bago magluklok ng ibang bersyonhindi masarhan ang kalagayang inapdeyt ng `%.250s'hindi malikha ang `%.255s'hindi matanggal ang talaksang control info `%.250s'hindi matanggal ang nagamit na talaksang bodega `%.250s'hindi mabasura `%.250s'hindi nalamnan ang %.250s ng paddinghindi mai-flush ang kalagayang inapdeyt ng `%.250s'hindi ma-fstat ang pinagmulan na talaksanhindi ma-fsync ang kalagayang inapdeyt ng `%.250s'hindi maluklok ang `%.250s' bilang `%.250s'hindi maluklok (daw) bagong talaksang info `%.250s'hindi mailuklok ang bagong talaksang info `%.250s' bilang `%.250s'hindi mailuklok ang bagong bersyon ng `%.255s'hindi ma-luklok ang kalagayang inapdeyt ng `%.250s'hindi makagawa ng backup link ng `%.255s' bago iluklok ang bagong bersyonhindi makagawa ng backup symlink para sa `%.255s'hindi malipat ang `%.255s' upang iluklok ang bagong bersyonhindi mabuksan ang bagong talaksang bodega `%.250s'hindi mabuksan ang talaksang output `%.250s'hindi mabuksan ang pinagmulan na talaksang `%.250s'hindi mabuksan ang temp control directoryhindi mabasa ang directory na bodega `%.250s'hindi mabasa ang filedescriptor flags para sa %.250shindi mabasa ang link `%.255s'hindi mabasa ang talaksang bahagi `%.250s'hindi matanggal ang bagong-binuklat na bersyon ng `%.250s'hindi matanggal ang bagong luklok na bersyon ng `%.250s'hindi matanggal ang bagong-luklok na bersyon ng `%.250s' upang maaaring iluklok-muli ang kopyang backuphindi matanggal ang laos na talaksang info `%.250s'hindi mapalitan ang pangalan ng bagong talaksang bodega `%.250s' tungo `%.250s'hindi mabuksang muli ang talaksang bahagi `%.250s'hindi maibalik ang bersyong backup ng `%.250s'hindi matakda ang close-on-exec flag para sa %.250shindi matakda ang pahintulot ng pag-execute sa `%.250s'hindi ma-stat ang %s `%.250s'hindi ma-stat ang `%.250s'hindi ma-stat ang kasalukuyang nakaluklok na conffile `%.250s'hindi ma-stat ang ibinalik na `%.255s' bago magluklok ng ibang bersyonhindi mai-truncate para sa kalagayang inapdeyt ng `%.250s'hindi makapagsulat ng kalagayang inapdeyt ng `%.250s'di inaasahang datos matapos ng pakete at pinili sa linya %ddi inaasahang dulo ng talaksan sa %s sa %.255sdi inaasahang dulo ng linya matapos ng pangalan ng pakete sa linya %ddi inaasahang dulo ng linya sa pangalan ng pakete sa linya %ddi kilalang uri ng compression `%s'!di kilalang opsyon na force/refuse `%.*s'di kilalang opsyon -%cdi kilalang opsyon --%sdi kilalang kalagayan sa linya %d: %.250snakabuklat pero hindi nakaayosdirectory ng mga update naglalaman ng talaksan `%.250s' na ang pangalan ay sobrang haba (haba=%d, max=%d)directory ng mga update naglalaman ng mga talaksan na magkaibang haba na mga pangalan (parehong %d at %d)pinapangalanan ng gumagamit na saklaw `%.*s' ay labis na maiksinaglalaman ng mga puwang ang string na bersyonwalang laman ang string na bersyonbabalakailangan niyong itakda ang mga pakete sa kanilang mga pangalan, hindi ang pangalan ng talaksan na kinaroroonan nila
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/tr.gmo dpkg-1.20.7.1/po/tr.gmo
--- dpkg-1.20.7.1-orig/po/tr.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/tr.gmo	2021-06-09 18:25:16.039505084 -0500
@@ -0,0 +1,780 @@
+��, ]<@�U?�Ua�UkSV��V��W&X=/X&mX�X-�Y.�YZ.ZEZ aZ4�Z�Z5�Z-	[.7[0f[1�[$�[4�[/#\S\qk\(�\$]+]K]:k]6�]1�]1^!A^2c^(�^�^�^!�^_#_A_R_.a_�_S�_�_` `98`mr`)�`:
+a9Ea.a'�a&�a�a3b5Gb}b�bP�b\�bv>c[�cUdgd|d�d�d�dZ�de*e�9e=fCfXf-if+�f�f)�fgg�/g=iRIi1�iD�iLjA`j'�j&�j(�j'k+Bk4nk!�k,�k9�k-,lZl#xl�l$�l�l"�l m!>m#`m�m�m�m�m�m"�m2n1Kn/}n'�n�n.�no-6oRdoH�oQpARpe�pf�pIaq7�q<�q r(3rB\r�r�r�r
�r �rs5,s1bs@�s0�stt#1t!Utwt�tK�t7�t55u-ku�u!�u�u'�u-v-Ev sv5�v�v �vw"#w!Fw"hw!�w$�w,�w.�w..x.]x�xH�x6�x(,y>Uy$�y �y�y�yzz�$z�z�z#�z:{-P|~|�|�|�|*�|<�|#'}-K}-y}��}<~I~5`~��~[���g�
K�Y�q�(��-���8��<6�.s���0��3�1�P�]�x����09�1j�*��JǊ2��E�&�2�ED�V���5��.0�-_�+��/��
�%��/�*M�&x�!��+��B�]0���!��M���2��L����!��"��՘4��.)�5X�3��Gҙ8�,S���(��Ț͚ߚG��C�3L�)��$��:ϛ,
+�V7� ����*˜���&�3B�-v�+��?Н,�	=�G�]�*u����� ӞH��=��D���gȠj0�����v�4D�5y�����w��B�u�&d�A��{ͦ!I�,k�*��.ç������ �5:�p� ��,��$ժ.��>)�*h�;��,ϫ������;j���u���$�"�� �,�8�9E�(�X��3�?5�8u�2��1�,�:@�4{�5��4�A�M]�-��ٲ��#�+�H�]�q� ��1��%۳8�?:�"z�B��6��&3�.Z�!��!��5͵� �6�K�_�t�	��9��.˶#��,�K�$j�����%η��%�9�-T�1����ʸ)�1�:E�?��&���=�7B�z�!��.��*�#�"4�&W�~�0��:ʻ� �@7�+x�;��3��1�AL���&��-Խ#�0&�;W�0��(ľ?��)-�-W�"������4ؿE
�S�n�,��"��!����5� L�8m�����-��5�,8�Be�B��+��G�$_� ��:��;��3�=P�����&����7��1�DO�c����2�*7�"b�3��:��-��&"�I�c�{���"������(��=�*T�J���"�����/�-N�|�)��%��#��@�@B�'�����������#�)�=�)R�|���!��!��#��"�%?�%e�'��,�������*5�'`�'����!���� �-%�#S�#w�+��%��$��� .�O�g�����"��:���F!�h�����$�������,�#D�h���!��"��:�� �5?� u�2����%����0�*O�$z�/����6��V�"l�(����<��.�)4�(^�*��+����,��)'�4Q�3��2��4��;"�<^�6��:��7
�@E�0��;��?��$3�AX�=��>��$�0<�!m���b��
�c+���:��<��=%�_c�H����8�R�)h�)��+��+����$������\��&��&�'=� e�7��t��23�-f�'��4��.��) �GJ�-����	����k�/l�����>��%��$%�#J�&n�!����!��"��^�@z��������%�+E�7q�!���������/�H�OW�8��*���%�1�=�3I�}���7��5���|4�
+����m��0J�G{���)��!
�/�E�^�3{�$��5��%
+�0�G�"[�4~���!��C��=7�%u�
�� ��(����%�76�n�I��.��6��!6�X�o�G��P��G!�.i�?��#��7��#4�X�+x�2��Y��f1�L��M��&3�KZ�3��=���6�=T���4��(��F�1L�;~�&������%9�._�.��a��e� ���� ��D��?�Y�x���&��-��7��/�7�=�.[�������"�������)*�T�&q�"��"��"���6�Q�p�7��B��H��&F�0m�����6���$�4<�q�O��
+��
+����
+�%�D�%]�*����
����+��7�+<�!h�M��$��4��F2@y6�1�#,=,j#�R� '/$W	|Z�4�2'Iq.�D�GYIQ�^�%T+z2�%�%�1%+WN��!�3*Bm5��"�$�2 +S+,���"
	$0	U	!o	*�	�	*�	0
+04
+&e
+3�
+4�
+5�
+)+,U�D�*�49Qo&�#�#�%�(
.F
9u
"�
'�
*�
.%T!q�(�(�4�40[e,�4�##,G"t"�/�/�++F-r*�&�!�/N f2�0�&�B#U.y��� �1Oc!}3��*�86O4�,�&�1 A'b.��4�1+8dz"���"�/B!V(x�#��:";#^S�M�E$j(�(�*�.0/"`I��4�-(Mv"����� B5`x9�'#;`_��GZ w� �!��!��",S#1�#'�#;�#(%%?%
e%'s%�%5�%*�%&>/&3n&A�&4�&3'-M'K{'9�' (�"(/�()�())I;)<�).�)6�)2(*K[*6�*&�*+)$+N+(c+1�+�+.�+ ,3",V,#f,�,E�,~�,An-L�-G�-DE.F�.5�.// /2P/�/�/O�/Z�/�G0K�0EI1�1�1�1�1�1k2l2�2��2^v3�3�3;46M4!�40�4�4�4g5Yl7��7>G8R�8Y�8R398�97�9;�9:3:1n:>�:!�:,;9.;Dh; �;&�; �;&<=<%]<�<#�<%�<�<==2=#I=)m=R�=N�=;9>3u>�>G�>?2$?PW?N�?n�?Ef@e�@sAH�A=�AI
BWBQrBP�BC0CKC^C{C/�C3�CS�CASDR�D2�DIEJeE@�E@�E;2FpnFp�FQPGN�G2�G $H0EH8vHJ�HA�H<IT\I)�I�I�I2J6IJ<�J.�J4�JM!KIoKK�KEL!KLMmLZ�LQMGhM*�M#�M&�M&N-N5N�LN�NOO�5O5�PQQ"Q6Q)FQTpQ0�Q>�Q>5R�tR"S)SRAS
�SW�T�T�YP�ZQ\b]-�];�],�]a^@y^=�^�^/_1?_>q_�_"�_
+�_&�_Ba2^a2�af�a@+b�lb!4dGVde�dVe [e+|e'�e=�e5f>Df�f0�f8�f9g-<g+jg3�gc�gw.h�h?�hi�h!SiNui��i|k��m*"r"MrEpr9�rA�r72sjsv~sG�s&=t0dtM�t�t�t�tXuouCxu,�u'�uGv7Yv]�v1�v!w$:w_w}w+�w;�w:�w57x]mx1�x�x"y'y0Bysy!�y&�yI�y"z�(z�{��{�z|}� ~*4=�r�Z��>�{(�+��KЂ��%��8ԃ9
�CG�3��&����9��Y���38�8l�(��DΈI�T]�W��L
+��W���e�R��Z� ��4�Q�b�s�W��Iގh(�@��:ҏV
�;d�C��>�b#�:��:��:��97�{q�A�%/�1U�����ÓʓГ!ݓ/��/�:N�O��$ٔc��Cb���1Õ+��1!�!S�Zu� Ж�	�!�6�N�c�Yp�;ʗ(�3/�9c�3��*ј#��= �$^�=����5��A�#X�.|�;��C�L+�Mx�-ƛ%��2�AM���'��;Ҝ%�)4�(^�,����#͝E�7�O�Ri�0��E�C3�)w�-��Kϟ�'7�(_�9��7 9��64�,k�X��8�3*�I^�-��0֢;�]C�����,�A�4P�.��F��+��]'���!��:ǥF�,I�kv�w�>Z�e����#�FC�R��<ݨP�1k���&��'өN��J�Wi�u��7�EC�?��3ɫI��HG�C��=Ԭ)�(<�+e�7��-ɭ,��$�@+�Ql�.��P��>�+Q�}���"��Aޯ �:/�*j�/��^ŰW$�O|�̱*ұ-��5+�2a���&��%��/�8�5O�3��9��8�3,�<`�2��FдG�_�}�/��'ɵ2�1$�)V�>����:ݶ@�9Y�B��Iַ@ �Ea�'��'ϸ%��!�?�Y�1v�S�� ��K�=i���1��1��5�;T�(��:��&��6�6R�#��A��"�7�"J�8m���&���G��,D�4q�C��"�<
�_J�2��2ݿ�P#�Qt�)��@��-1�C_�'��4��&�@'�Uh�9��@��>9�Ex�;��:��E5�M{�:��<�HA�'��I��Z��RW�-��Q��**�U�Sr�*��p��b�E��?��S��Z�E��)%�4O�����'��+��/�3A�u�3�������wf�,��.�::�,u�K�����6��.��+��;*�6f�/��a��9/�i�y������==�
{�
��K��,��(�'9�;a�-��"��2��3!��U�G��)� H�0i���+��J��3!�-U� ��$��0����*�E�sX�L��:�/T���	����M����&�Q8�J�������
��4�����Ab�S��2��5+�'a�+����)��K��<E�L��*��&��+!�3M�U��&��,��j+�T��,��
�3&�!Z�!|�4��Y��-�\D�Q��[��7O�,����J��N�Wh�H��`	�+j�<��)��0��I.�/x�f��{�J��E��1�MN�9��@��"�:�0T���9��.��P��6N�L����.���$6� [�4|�8��[��sF�*��
+����I�aX�������0��/-�E]�����,��,���2�*M�Dx�������+
+�6�IU�&��&��'��+�.A�p���H��V���<�-��>��1�J�Lc���/��N��*<�Yg�����'��
+�-�&H�+o�;������#��.�JF�9��,��i��*b�5��K��@�.P�\�)��J�NQ�(��d��#.�-R�,����u��B0�Es�.��8��/!�cQ�n���$�o��}�"��4��1��.�,L�,y�;��Y��<�%Y�:�7����0=$\�2�$�#�0Mk$�7�.�<6R-�6�2�D!%f6�8�7�044e�M�3�S-���(�'�##@/d3�I�,?1_?��#�.)3XF�D��	>�	<�	,
+/G
++w
+/�
+=�
+A3S9�8�+�?&6f4�-�6
.7
Uf
P�
:
jH8�F�43$h6�;�9#:^"{:�4�5-Dr8�D�:
+6E=|#�+�>
+IE`>�0�$/*T&#�-��).B/q,�/�7�E63|+�c�`@V�!�1NLW�I�7=u@��>�-1D(v�+���61M�N�f�NMP�$�e���]�
+f�Q�n>{�k�%D[.1F\KIq\�9����2v�hc-}D<Y�
��~��0��L���DS�HO�|['�N�F����l��<}YGO�����V�	LehX?�b��po�r�RBuW���������2���>����9A���u'�PH?T,.�J_7����a����y!>a��)�=�I�����6t\l1�����w��^t��U�}����*m�-�^�����s����
~�n����������A����S�����8�i,P%������jLy��6��H�g��x��� ��;�}�����C����?@�����C���Ka���=bw�����0����o�b�hX�����s��f2�f�-��&�������������n"�k<��Re�j� �4�;������7z.Z�C�Z��iT3/X����3��I�2�1m��R���0EJt�C��!�����4���f�������JQ��,���!�[s]c���
�8�d�c�L, _5~�@6aU��Q��=\(���Qy�P��E��g��������(�R!��
+������i����AY��+�$��1�p���KWb)|��k��Xi�������d��_T�&$x�{�zo������d��J�g:���q55��������*]N�@G�����3O�8��E�F��
+�rk�B�����(+:��Uq��U�I��V#��j��-�_������V�A�5*�����	����Y��[�D6v��V���G��`+M��@�y�G��B9����`%mp/�|F��"�Ze�W/��$	�d�4�'�o���w^���)�c��|��;��4���M&`p�%��0v^�+���	���z#j��7�mhE����x
�T�(3&M?�`�ls��v���x�l��n�/� e�t)��8��~{��H�B#q�$
+K�O=wZr�����>��N;����z"�M'<�.uW�{��9�S�:g"��:�#����]S���ruN�P��7��*
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on  new Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd bytes.
+ old Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd, main archive=%jd.
+%d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s subprocess failed with wait status code %d%s subprocess returned error exit status %d%s subprocess was interrupted%s subprocess was killed by signal (%s)%s%s suggests %s%s%s%s: %s%s:%s
+ %s
+%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%.255s' is not a Debian format archive'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one <archname> argument--%s takes one <pkgname> argument--%s takes one <trigname> argument--%s takes one <version> argument--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Authentication is required to run update-alternativesCommands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not chroot into maintainer script environmentDo not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Options:
+  -v, --verbose                    Enable verbose output.
+  -D, --debug                      Enable debugging output.
+      --showformat=<format>        Use alternative format for --show.
+      --deb-format=<format>        Select archive format.
+                                     Allowed values: 0.939000, 2.0 (default).
+      --nocheck                    Suppress control file check (build bad
+                                     packages).
+      --root-owner-group           Forces the owner and groups to root.
+      --[no-]uniform-compression   Use the compression params on all members.
+  -z#                              Set the compression level when building.
+  -Z<type>                         Set the compression type used when building.
+                                     Allowed types: gzip, xz, none.
+  -S<strategy>                     Set the compression strategy when building.
+                                     Allowed values: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Run update-alternatives to modify system alternative selectionsSelecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenValidatable things: pkgname, archname, trigname, version.
+
+VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchitecture name '%s' is invalid: %sarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' is not a regular filearchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurebuilding an unknown package in '%s'.building package '%s' in '%s'.can't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot access archive '%s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open directory '%s'cannot open security status notification channelcannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set primary group ID to rootcannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot stat pathname '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file '%s' for package '%s' is missing valuecontrol file '%s' for package '%s' is missing value separatorcontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is emptyepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while cleaning uperror while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not a Debian binary archive (try dpkg-split?)file '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentformat version with too big major componentformat version with too big minor componentfound unknown packages; this might mean the available database
+is outdated, and needs to be updated through a frontend method;
+please see the FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>generated corrupt ar header for '%s'group '%s' does not existheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalled %s package %s scriptinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal errorinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnew %s package %s scriptnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no 'control' file in control archive!no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete compression type '%s'; use xz insteadobsolete compression type '%s'; use xz or gzip insteadobsolete force/refuse option '%s'obsolete option '--%s'old %s package %s scriptold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoutside error context, abortingoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package architecture is missing or emptypackage contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name '%s' is invalid: %spackage name has characters that aren't lowercase alphanums or '-+.'package not in status nor available database at line %d: %.250spackage signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerevision number is emptyrm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filesyntax error in triggers deferred file '%.250s' at line %d character %zd '%s'takes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo many nested errors during error recoverytoo-long line or missing newline in '%.250s'treewalk root %s is not a directorytrigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name '%s' is invalid: %strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to parse timestamp '%.255s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunrecoverable fatal error, abortingunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion '%s' has bad syntax: %sversion number does not start with digitversion number is emptyversion string has embedded spacesversion string is emptyversioned Provideswait for %s subprocess failedwait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.17.10
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2018-01-03 16:44+0300
+Last-Translator: Mert Dirik <mertdirik@gmail.com>
+Language-Team: Turkish <debian-l10n-turkish@lists.debian.org>
+Language: tr
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+X-Generator: Poedit 1.8.11
+
+ şu paketlerin askıdaki tetikleyicileri çözümlenemiyor olabilir:
+
+'%s' yapılandırma dosyası sisteminizde mevcut değil.
+İsteğiniz üzerine yeni yapılandırma dosyası kuruluyor.
+
+Hata ayıklama seçenekleri bit tabanlı veya işleci ile bir arada kullanılabilir.
+Anlamların ve değerlerin ileride değişebileceğini göz önünde bulundurun.
+
+Sisteminizdeki paketleri kurmak veya kaldırmak için 'dpkg' kullanın. Kullanıcı
+dostu paket yönetimi için 'apt' veya 'aptitude' kullanın. 'dpkg-deb --extract'
+komutu ile açılmış paketler düzgün şekilde kurulmamıştır !
+
+UYARI - [!] ile işaretlenmiş seçenekler kurulumunuza ciddi şekilde zarar verebilir.
+[*] ile işaretlenmiş seçenekler öntanımlı olarak etkin durumdadır.
+     Kurulumdan bu yana değiştirilmemiş.
+     Paketteki sürüm son kurulumdakiyle aynı.
+     normal bir dosya değil    %.255s
+   Bu durum için ne yapmak istersiniz ?  Seçenekleriniz şunlardır:
+    Y ya da I : paket geliştiricisinin sürümünü kullan
+    N ya da O : mevcut/kurulu durumdaki sürümü kullanmaya devam et
+      D       : sürümler arasındaki farkları göster
+      Z       : durumu incelemek için bir kabuk başlat
+  %.250s (sürüm %.250s) mevcut ve %s.
+  %.250s (sürüm %.250s) kurulacak.
+  %.250s %s.
+  %.250s kurulu, ama sürümü %.250s.
+  %.250s kurulu değil.
+  %.250s paketinin yapılandırması kaldırılacak.
+  %.250s kurulacak, ama sürümü %.250s.
+  %.250s kaldırılacak.
+  %.250s paketi açılmış, ama hiç yapılandırılmamış.
+  %.250s paketi açılmış, ama sürümü %.250s.
+  %.250s paketinin yapılandırılmış en son sürümü %.250s.
+  %.250s, %.250s paketini sağlıyor, mevcut ve %s.
+  %.250s, %.250s paketini sağlıyor ve kurulacak.
+  %.250s, %.250s paketini sağlıyor ama %s.
+  %.250s, %.250s paketini sağlıyor ama yapılandırması kaldırılacak.
+  %.250s, %.250s paketini sağlıyor ama kaldırılacak.
+  %s (%s), %s paketini sağlar.
+  -?, --help                       Bu yardım iletisini göster.
+      --version                    Sürüm numarasını göster.
+
+  %s paketi tetikleyici işlemlerini bekliyor.
+  %s paketi henüz yapılandırılmadı.
+  '%s' paketi kurulu değil.
+  %s paketi kaldırılacak.
+  %2$s paketini sağlayan %1$s paketi tetikleyici işlemlerini bekliyor.
+  %2$s paketini sağlayan %1$s henüz yapılandırılmadı.
+  %2$s paketini sağlayan %1$s kurulu değil.
+  %2$s paketini sağlayan %1$s paketi kaldırılacak.
+  Sistemde mevcut olan %s paketinin sürümü %s.
+  Sistemde mevcut olan %s paketinin %s tarafından sağlanan sürümü %s.
+  %s paketinin yapılandırılacak olan sürümü %s.
+  %s bağı %s konumuna işaret ediyor  bağ için en iyi sürüm %s  bağ için en iyi sürüm mevcut değil  bağ mevcut değil  mevcut bağ %s konumuna işaret ediyor  bağımlı %s bağı %s konumuna işaret ediyor  bağımlı %s: %s %7jd bayt, %5d satır   %c  %-20.127s %.127s
+ %2$s bölümünden %1$d paket:  şu bölümden %d paket: şu bölümden %d paket: %s (%jd bayt)
+ %s (%s), %s paketini bozar ve %s.
+ %s (normal bir dosya değil)
+ ==> Kurulumdan bu yana (siz ya da bir betik tarafından) silinmiş.
+ ==> Sistemdeki dosya ya siz ya da bir betik oluşturmuş.
+ ==> Bu dosya aynı zamanda bir paket tarafından da sağlanıyor.
+ ==> Eski yapılandırma dosyası öntanımlı olarak tutuluyor.
+ ==> Kurulumdan bu yana (siz ya da bir betik tarafından) değiştirilmiş.
+ ==> Paket dağıtıcısı güncellenmiş bir sürümü yayımlamış.
+ ==> İsteğiniz üzerine halihazırdaki eski dosya kullanılıyor.
+ ==> Yeni yapılandırma dosyası öntanımlı olarak kullanılıyor.
+ ==> İsteğiniz üzerine yeni dosya kullanılıyor.
+ %s paketi: parça(lar)  Öntanımlı eylem yeni sürümü kurmaktır.
+ Öntanımlı eylem mevcut sürümü korumaktır.
+ ve  şuna bağımlı:  yeni Debian paketi, sürüm %d.%d.
+ boyut %jd bayt: denetim arşivi=%jd bayt.
+ eski Debian paketi, sürüm %d.%d.
+ boyut %jd bayt: denetim arşivi=%jd, ana arşiv=%jd.
+%d program PATH değişkeninde bulunamadı ya da çalıştırılabilir bir dosya değil
+%s%d program PATH değişkeninde bulunamadı ya da çalıştırılabilir bir dosya değil
+%s%d dosya veya dizin kurulu durumda.)
+%d dosya veya dizin kurulu durumda.)
+%d gerekli denetim bileşeni eksik%d gerekli denetim bileşeni eksik%s (alt süreç): %s
+%s - öncelik %d%s, %s paketini bozar%s, %s paketi ile çakışır%s dosyası bozuk: %s%s hata ayıklama seçeneği, --debug=<sekizlik> ya da -D<sekizlik>:
+
+ Numara  Kaynaktaki ref.  Açıklama
+%s, %s paketine bağımlı%s, %s paketini geliştirir%s zorlama seçenekleri - sorun yaşandığında takınılacak tutum:
+  uyar ama devam et:  --force-<şey>,<şey>,...
+  hata ver ve dur:    --refuse-<şey>,<şey>,... | --no-force-<şey>,...
+ Zorlanan şeyler:
+%s düzgün şekilde kurulmamış; bu pakete bağlı tüm bağımlılıklar gözardı ediliyor%s, %s paketine ön bağımlı%s, %s paketini tavsiye eder%s alt süreci %d durum kodu döndürerek başarısız oldu%s alt süreci %d hatalı çıkış kodu ile sona erdi%s alt süreci kesintiye uğradı%s alt süreci (%s)%s sinyali ile sona erdirildi%s, %s paketini önerir%s%s%s: %s%s:%s
+ %s
+%s:
+    Parça formatı sürümü:                     %d.%d
+    Hangi paketin parçası:                    %s
+    Paketin sürümü:                           %s
+    Paketin mimarisi:                         %s
+    Paketin MD5 sağlama toplamı:              %s
+    Paketin büyüklüğü:                        %jd bayt
+    Paketi parçalama aralığı:                 %jd bayt
+    Parça numarası:                           %d/%d
+    Parça büyüklüğü:                          %jd bayt
+    Parça konumu:                             %jd bayt
+    Parça dosyası boyutu (kullanılan kısım):  %jd bayt
+
+%s: yapılandırma dosyası (%.250s) normal bir dosya ya da sembolik bağ değil (= '%s')%s: yapılandırma dosyası (%.250s) bozuk bir dosya adına işaret ediyor
+ ('%s', '%s' konumuna işaret eden bir sembolik bağ)%s: yapılandırma dosyası döngüsel bir bağ (%s)
+ (= '%s')%s: bağımlılık sorunları var ama isteğiniz üzerine yapılandırılıyor:
+%s%s: bağımlılık sorunlarına rağmen isteğiniz üzerine tetikleyiciler işleniyor:
+%s%s: bağımlılık sorunları var, yine de isteğiniz üzerine kaldırılıyor:
+%s%s: girdi bzip2 akışına bağlanırken sorun yaşandı%s: girdi gzip akışına bağlanırken sorun yaşandı%s: çıktı bzip2 akışına bağlanırken sorun yaşandı%s: çıktı gzip akışına bağlanırken sorun yaşandı%s: '%.250s', '%.250s' konumuna bağlanamadı: %s%s: '%.250s' (üzerine yazılmadan önce) kaldırılamadı: %s%s: '%.250s' kaldırılamadı: %s%s: eski yedek (%.250s) kaldırılamadı: %s%s: eski dağıtık sürüm (%.250s) kaldırılamadı: %s%s: '%.250s' dosyasının adı '%.250s' olarak değiştirilemedi: %s%s: dâhilî bzip2 okuma hatası%s: dâhilî bzip2 okuma hatası: '%s'%s: dâhilî bzip2 yazma hatası%s: dâhilî bzip2 yazma hatası: '%s'%s: dâhilî gzip okuma hatası%s: dâhilî gzip okuma hatası: '%s'%s: dâhilî gzip yazma hatası%s: dâhilî gzip yazma hatası: %s%s: dâhilî gzip yazma hatası: '%s'%s: lzma kapatma hatası%s: lzma hatası: %s%s: lzma okuma hatası%s: lzma yazma hatası%s: doğrudan kopyalama hatası: %s%s: %s sağlama amaçlı açılamadı: %s%s: yapılandırma dosyasına readlink çağrısı yapılamadı (%s)
+ (= '%s'): %s%s: yapılandırma dosyasına stat çağrısı yapılamadı (%s)
+ (= '%s'): %s'%.255s' arşivi hiç '%.255s' denetim bileşeni içermiyor'%.255s' dosyası Debian biçimli bir arşiv değil'%s', '%s' ile çakışıyor'%s' dosyası kullanıcı tanımlı bir Öncelik değeri (%s) içeriyor'%s' bir değer almaz'%s' alanındaki paket adı (%.255s) geçersiz: %s'%s' alanında mimari adı verilmemiş ya da geçersiz bir mimari adı verilmiş'%s' alanında paket adı değeri yok ya da geçersiz bir paket adı verilmiş'%s' alanı, '%.255s' referansı:
+ '%c' artık kullanılmamaktadır, bunun yerine '%c=' ya da '%c%c' kullanın'%s' alanı, '%.255s' referansı:
+ geçersiz sürüm ilişkisi (%c%c)'%s' alanı, '%.255s' referansı:
+ sürüm numarasında örtük eşleşme, `=' kullanmanız önerilir'%s' alanı, '%.255s' referansı:
+ sürüm değeri bir harf ya da rakamla başlamıyor, boşluk eklemeniz önerilir'%s' alanı, '%.255s' referansı: '%.255s' geçersiz bir mimari adı: %s'%s' alanı, '%.255s' referansı: sürüm değerinin sonu yok'%s' alanı, '%.255s' paketine olan referanstan sonra söz dizimi hatası'%s' bir değer gerektirir'%s' PATH değişkeninde bulunamadı ya da çalıştırılabilir bir dosya değil(Tümüyle değiştirilmiş olan %s paketinin ortadan kalkışı kaydediliyor.)
+(Veritabanı okunuyor ... (açıklama mevcut değil)(toplam %jd bayt)
+, bellek dökümü yapıldı-%c seçeneği bir değer almaz-%c seçeneğine bir değer verilmesi gerekiyor--%s --pending, seçenek olmayan bir argüman almaz--%s --recursive seçeneği en az bir adet yol argümanı kullanımını gerektirir--%s seçeneği (henüz) standart girdiden .deb dosyası okuyamaz--%s seçeneği .deb dosyası ve dizin argümanlarının kullanımını gerektirir--%s <ad> argümanının kullanımını gerektirir--%s seçeneği <ad> ve <yol> argümanlarının kullanımını gerektirir--%s seçeneği bir .deb dosyası argümanının kullanımını gerektirir--%s seçeneği <dizin> argümanının kullanımını gerektirir--%s seçeneği <dosya> argümanının kullanımını gerektirir--%s seçeneği bir adet argüman kullanımını gerektirir--%s seçeneği bir hedef dizin kullanımını gerektirir.
+Belki de dpkg --install komutunu kullanmalısınız ?--%s seçeneği geçerli bir paket adı kullanılmasını gerektirir ama '%.250s' bu şartları sağlamıyor: %s--%s seçeneği en az bir adet paket arşivi dosyası argümanına ihtiyaç duyar--%s seçeneği en az bir adet paket adı argümanı kullanımını gerektirir--%s dört adet argüman kullanımını gerektirir--%s seçeneği bir değer almaz--%s seçeneğine bir değer verilmesi gerekiyor--%s seçeneği pozitif bir sekizlik argüman gerektirir--%s seçeneği bir ya da daha fazla parça dosyası argümanı gerektirir--%s seçeneği en fazla bir adet Paket-dosyası argümanı alır--%s en çok iki argüman alır--%s seçeneği (.deb dosyası ve dizin olacak şekilde) en fazla iki argüman alır--%s seçeneği sadece bir argüman alır--%s tam iki argüman alır--%s seçeneği argüman almaz--%s seçeneği bir <mimari adı> argümanı alır--%s seçeneği bir adet <paket adı> argümanı alır--%s seçeneği bir adet <tetikleyici adı> argümanı alır--%s seçeneği bir <sürüm> argümanı alır--%s seçeneği bir adet paket adı argümanı alır--%s seçeneği (bir .deb dosyası olacak şekilde) sadece bir argüman alır--%s seçeneği kullanımdan kalkmış olan '%s' işleci ile kullanıldı--auto seçeneği tam olarak bir adet parça dosyası argümanı gerektirir--auto seçeneği --output seçeneğinin kullanılmasını gerektirir--compare-versions kötü ilişki--compare-versions seçeneği 3 argüman alır: <sürüm> <ilişki> <sürüm>--search seçeneği en az bir dosya adı örüntüsü argümanı kullanımını gerektirir--split seçeneği bir kaynak dosya adı argümanının kullanımını gerektirir--split seçeneği en fazla bir kaynak dosya adı ve hedef öneki alır--update kullanıldı ama %s mevcut değil--remove için --update gereksizdir... görünüşe göre sorunsuz geçti.../%s, ama:
+<sıkıştır> tar -cf<deb> Debian biçimindeki bir arşiv dosyasının adıdır.
+<c-dosya> yönetimsel dosya bileşeninin adıdır.
+<c-alanı> esas `control' dosyasındaki bir alanın adıdır.
+
+<aç><dpkg-deb --info pipe><bağ> ve <yol> aynı olamaz<bağ>, %s/<ad> konumuna işaret eden sembolik bağdır.
+  (örneğin /usr/bin/pager)
+<ad>, bu bağ grubunun kullanacağı esas addır.
+  (örneğin pager)
+<yol>, alternatif hedef dosyalardan birinin dosya sistemindeki konumudur.
+  (örneğin /usr/bin/less)
+<öncelik> bir tam sayıdır; öncelik sayısı daha büyük olan seçeneklerin otomatik
+  kipteki önceliği diğerlerine göre daha yüksektir.
+
+<paket durumu ve ilerleme dosyası tanımlayıcısı><standart hata><standart girdi><standart çıktı>'%s' ekleniyor
+Çakışan paketlerin kurulumuna izin ver%2$s seçeneği kullanılabilir olmadığı için %1$s alternatifi değiştirilmedi.Eksik yapılandırma dosyalarını her zaman kurHer zaman yeni yapılandırma dosyalarını kullan, soru sormaHer zaman eski yapılandırma dosyalarını kullan, soru sormaBaşka bir işlem veritabanını yazmak için kilitlemiş ve şu anda veritabanını
+değiştiriyor olabilir. Aşağıdaki sorunlardan bazıları bundan kaynaklı olabilir.
+MimariDoğrulanıyor: %s ...
+update-alternatives komutunu çalıştırmak için kimlik doğrulama gerekmektedirKomutlar:
+  --add <sahip> <grup> <kip> <yol>
+                           veritabanına yeni bir <yol> girdisi ekle.
+  --remove <yol>           <yol> girdisini veritabanından kaldır.
+  --list [<glob-örüntüsü>] veritabanında bulunan geçersiz kılmaları listele.
+
+Komutlar:
+  --check-supported                dpkg'nin tetikleyici desteğini sorgula.
+
+Komutlar:
+  --install <bağ> <ad> <yol> <öncelik>
+    [--slave <bağ> <ad> <yol>] ...
+                           sisteme bir alternatif grubu ekle.
+  --remove <ad> <yol>      <ad> alternatif grubundan <yol>'u kaldır.
+  --remove-all <ad>        alternatifler sisteminden <ad>'ı kaldır.
+  --auto <ad>              <name> ana bağını otomatik kipe ayarla.
+  --display <ad>           <ad> grubu hakkındaki bilgileri göster.
+  --query <ad>             --display <ad> komutunun ayrıştırılabilir sürümü.
+  --list <ad>              <ad> grubunun tüm hedeflerini listele.
+  --get-selections         ana alternatiflerin adlarını ve durumlarını listele.
+  --set-selections         alternatiflerin durumlarını standart girdiden oku.
+  --config <ad>            <ad> grubu için alternatifleri göster ve hangi
+                           alternatifin kullanılacağını sor.
+  --set <ad> <yol>         <yol>'u <ad> için alternatif olarak ayarla.
+  --all                    tüm alternatifler için --config seçeneğini çağır.
+
+Komutlar:
+  -s|--split <dosya> [<önek>]      Arşivi parçalara ayır.
+  -j|--join <parça> <parça> ...    Parçaları bir araya getir.
+  -I|--info <parça> ...            Bir parça hakkındaki bilgileri göster.
+  -a|--auto -o <bütün> <parça>     Parçaları otomatik olarak bir araya getir.
+  -l|--listq                       Eşleşmeyen parçaları listele.
+  -d|--discard [<dosya adı> ...]   Eşleşmeyen parçaları at.
+
+Komutlar:
+  [--add] <dosya>           yönlendirme ekle.
+  --remove <dosya>          yönlendirmeyi kaldır.
+  --list [<glob-örüntüsü>]  dosya yönlendirmelerini göster.
+  --listpackage <dosya>     dosyayı hangi paketlerin yönlendirdiğini göster.
+  --truename <dosya>        yönlendirilmiş dosyanın asıl adını döndür.
+
+--compare-versions seçeneğinin kullandığı karşılaştırma işleçleri:
+  lt le eq ne ge gt         (boş sürümler diğer her sürümden daha eski sayılır);
+  lt-nl le-nl ge-nl gt-nl   (boş sürümler diğer her sürümden daha yeni sayılır);
+  < << <= = >= >> >         (control dosyası söz dizimi ile uyumluluk için).
+
+Yapılandırma dosyası '%s'
+Yapılandırma dosyası '%s' (aslında '%s')
+Bu pakete yardımcı olabilecek tüm paketleri yapılandırYapılandırma kaldırılıyor: %s (%s) ...
+%3$s (%4$s) paketinin kaldırılabilmesi için %1$s (%2$s) yapılandırması kaldırılıyor ...
+Debian %s paket yönetim programı sorgulama aracı sürüm %s.
+Debian %s paket tetikleyici yardımcı programı sürüm %s.
+Debian %s sürüm %s.
+Debian '%s' paket arşivi arka ucu sürüm %s.
+Debian '%s' paket yönetim programı sürüm %s.
+Debian '%s' paket parçalama/birleştirme aracı; sürüm %s.
+%s dosyası silindi.
+Bağımlılıklar ve çakışmalarAçıklamaİstenen=bilinmeyen(U)/kur(I)/kaldır(R)/temizle(P)/tut(H)
+| Durum=kurulu-değil(N)/kurulu(I)/yapılandırma-dosyası(C)/açılmış(U)
+|/yarı-yapılandırılmış(F)/yarı-kurulu(H)/tetikleyici-bekliyor(W)
+|/tetikleyici-askıda(T)/ Hata?=(yok)/tekrar-kur(R) (Durum,Hata: büyük-harf=kötü)
+Geliştirici betiği ortamı kök dizinini chroot ile değiştirmePaket açarken güvenli G/Ç işlemlerini kullanmaİşleme sırasında hatalarla karşılaşıldı:
+Çıkış durumu kodu:
+  0 = tamam
+  1 = --auto ile birlikte, dosya bir parça değil
+  2 = sorun var
+'%.250s' dosyası çok parçalı bir arşivin parçası değil.
+Biçim söz dizimi:
+  Biçim, her paket için çıktıya yazılacak bir dizgidir. Biçim standart
+  atlatma karakterlerini (\n 'yeni satır', \r 'satır başı' veya \\ 'normal
+  eğik çizgi') içerebilir. Paket alanlarına ${değişken[;genişlik]} söz dizimi
+  ile değişken başvuruları eklenerek paket bilgileri dahil edilebilir. Aksi
+  belirtilmediği sürece alanlar sağa dayalıdır. Genişlik negatif olarak
+  belirtilirse sola dayalı olur.
+Genelde faydalı ilerleme bilgisiPaylaşılan yönlendirmeyi (%s) kaldırma isteği gözardı ediliyor.
+yönlendiren paketin (%2$s) sahip olduğu '%1$s' paketinin yönlendirilme isteği gözardı ediliyor
+%d paket hakkındaki bilgi güncellendi.
+%d paket hakkındaki bilgiler güncellendi.
+Aşırı miktarda gereksiz bilgiPaketi gerçekliği doğrulanamasa bile kurBaşka bir paketi bozacak olsa bile kurYapılandırma dosyasının yeni sürümü kuruluyor: %s ...
+Geliştirici betiklerinin çağrıları ve durumlarıDepo dizininde silinmesi gereken bazı dosyalar bırakıldı:
+'%s' bırakılıyor
+Çok fazla bağımlılık/çakışma çıktısıdpkg/info dizini gibi şeyler hakkında çok fazla bilgiHer bir yapılandırma dosyası için çok fazla çıktıİşlenen her dosya için çok fazla çıktıTetikleyicilerle ilgili çok fazla çıktıalan adında (%.*s) MSDOS dosya sonu karakteri (^Z)'%.*s' alanının değerinde MSDOS dosya sonu karakteri (^Z) (yeni satır karakteri eksik olabilir)programın bu çalışmasında %s paketinin bir çok kopyası
+ açılmış ! Paket sadece bir kez yapılandırılacak.
+Ad'%s' yönlendirmesi yok, hiçbir yönlendirme kaldırılmadı.
+Not: root kullanıcısının PATH ortam değişkeni genelde /usr/local/sbin, /usr/sbin ve /sbin'i içerirYapılandırılacak bir şey yok.Yeni sürümü olmasa da yapılandırma dosyalarını değiştirmeyi teklif etSeçenekler:
+  --admindir=<dizin>               %s yerine <dizin>'i kullan.
+  --by-package=<paket>             Tetikleme bekleyicisini geçersiz kıl
+                                     (normalde dpkg tarafından ayarlanır).
+  --await                          Paket, işlemeyi beklesin.
+  --no-await                       Hiçbir paket, işlemeyi beklemesin.
+  --no-act                         Hiçbir şeyi değiştirme - sadece dene.
+
+Seçenekler:
+  --depotdir <dizin>               %s/%s yerine <dizin> kullan.
+  -S|--partsize <boyut>            -s seçeneği için azami parça boyutu değeri
+                                     (KiB cinsinden, öntanımlı değer 450'dir).
+  -o|--output <dosya>              -j seçeneği için dosya adı (öntanımlı ad
+                                     <paket>_<sürüm>_<mimari>.deb şeklindedir).
+  -Q|--npquiet                     -a bir parça değilse sessiz ol.
+  --msdos                          8.3 dosya adları oluştur.
+
+Options:
+  -v, --verbose                    Ayrıntılı çıktıyı etkinleştir
+  -D, --debug                      Hata ayıklama çıktısını etkinleştir
+      --showformat=<biçim>         --show için alternatif biçim kullan
+      --deb-format=<biçim>         Arşiv biçimini seç. İzin verilen
+                                     değerler: 0.939000, 2.0 (öntanımlı)
+      --nocheck                    Denetim dosyasını denetleme (bozuk paketleri
+                                     inşa et)
+      --root-owner-group           Sahip ve grupları root yap.
+      --[no-]uniform-compression   Sıkıştırma ayarlarını tüm üyelerde kullan
+  -z#                              İnşa esnasında kullanılacak sıkıştırma değeri
+  -Z<tür>                          İnşa esnasında kullanılacak sıkıştırma türü
+                                     Türler: gzip, xz, none (hiçbiri)
+  -S<strateji>                     İnşa esnasında kullanılacak sıkıştırma stra-
+                                     tejisi. İzin verilen: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Her yapılandırma dosyası için çıktıİşlenen her dosya için çıktıYönlendirilmemiş bir dosyayı yönlendirilmiş olanın üzerine yazBaşka bir dosyayı paketin bir dosyasının üzerine yazBir paketin dosyasını başka bir paketin dizininin üzerine yazPATH önemli programları içermiyor, muhtemel sorunlarPATH ayarlanmamış%s paketi tutuluyor, bu pakete dokunulmayacak. Geçersiz kılmak için
+  --force-hold seçeneğini kullanabilirsiniz.
+%s paketi bir çok kez listelenmiş, sadece bir kez işlem yapılacak.
+'%s' paketi hiç dosya içermiyor (!)
+Henüz tekrar bir araya getirilmemiş paketler:
+%2$s paketinin %1$d. parçası dosyalandı. (bazı parçalar hâlâ gerekli: Yol'Pre-Depends' alanıPaket açılacak: %s ...
+Mevcut seçimi[*] korumak için <enter>'a basın ya da seçiminizin numarasını girin: ÖncelikYanlış mimariye sahip ya da mimarisi olmayan paketleri bile işleYanlış sürüme sahip paketleri bile işleTetikleyiciler işleniyor: %s (%s) ...
+Çok fazla hatayla karşılaşıldığı için işlem yarıda kesildi.
+Yapılandırma dosyaları kaldırılıyor: %s (%s) ...
+%s paketi %d parçadan bir araya getiriliyor: %s paketi %d parçadan bir araya getiriliyor: %s paketinin bilgileri %s dosyasına kaydedildi.
+Temel bir paketi kaldırKurulum gerektiren paketleri kaldırKaldırılıyor: %s (%s) ...
+Kaldırılıyor: '%s'
+Bir paketi eski bir sürümüyle değiştirKurulu paketteki dosyalar ile değiştiriliyor %s (%s) ...
+Kullanılabilir paketler bilgisi %s ile değiştiriliyor.
+Eski paketteki dosyalar değiştiriliyor %s (%s) ...
+Sistemdeki alternatif seçimlerini değiştirmek için update-alternatives komutunu kullanınDaha önce seçili olmayan %s paketi seçiliyor.
+SeçimTüm zorlama seçeneklerini ayarlaAyarlanıyor: %s (%s) ...
+Tetikleyicilerle ilgili çok çok fazla çıktıGeçersiz satırı atla: %sBilinmeyen alternatifi atla (%s).Seçili olmayan %s paketi atlanıyor.
+%s paketi %d parçaya bölünüyor: %s paketi %d parçaya bölünüyor: DurumAşağıdaki paketler diğer paketlerde etkinleştirdikleri tetiklemelerin
+işlenmesini bekliyorlar. Bu işleme dselect ya da dpkg --configure --pending
+(ya da dpkg --triggers-only) komutu kullanılarak talep edilebilir:
+Aşağıdaki paketler kurulumları esnasında yaşanan sorunlardan ötürü
+sıkıntılı durumdadır. Bu paketlerin ve bu paketlere bağımlı olan
+diğer paketlerin işlev görebilmeleri için bu paketler yeniden kurul-
+malıdır:
+Veritabanında aşağıdaki paketlerin liste denetim dosyalarının kaydı yok,
+bu yüzden bu paketlerin yeniden kurulmaları gerekiyor:
+Veritabanında aşağıdaki paketlerin md5sums denetim dosyalarının kaydı yok,
+bu yüzden bu paketlerin yeniden kurulmaları gerekiyor:
+Aşağıdaki paketlerin yapılandırma işlemleri, büyük olasılıkla ilk
+yapılandırılmalarında çıkan sorunlardan dolayı, yarım kalmış durumda.
+Yapılandırma işlemi dpkg --configure <paket> komutu ile ya da dselect
+menü seçeneği kullanılarak tekrar denenmelidir:
+Aşağıdaki paketler, kurulum esnasında yaşanan sorunlar nedeniyle yarı
+kurulmuş durumdalar. Kurulum büyük olasılıkla tekrar denenerek tamamlana-
+bilir; ya da bu paketler dselect veya dpkg --remove kullanılarak kaldırı-
+labilir:
+Aşağıdaki paketlerin bir mimarisi yok:
+Aşağıdaki paketler geçersiz bir mimariye sahip:
+Aşağıdaki paketler bilinmeyen bir yabancı mimariye ait; bu durum ön uç
+araçlarında bağımlılık sorunlarına yol açar. dpkg --add-architecture komutu
+ile yabancı mimarileri kaydedebilir ve bu sorunu düzeltebilirsiniz:
+Aşağıdaki paketler tetiklenmiş ama tetikleyiciler henüz işlenmemiş. Tetikleyici
+işlemelerin yapılmasını istemek için dselect ya da dpkg --configure --pending
+(ya da dpkg --triggers-only) komutları kullanılabilir:
+Aşağıdaki paketler açılmış ama henüz yapılandırılmamış. Bu pa-
+ketler işlev görür hale gelebilmeleri için dpkg --configure ko-
+mutu ile veya dselect'teki menü seçeneği kullanılarak yapılandı-
+rılmalıdırlar:
+%2$s alternatifi için %1$d seçenek var (%3$s sağlanıyor).%2$s alternatifi için %1$d seçenek var (%3$s sağlanıyor).%s alternatifini sağlayan bir program yok.%s bağ grubunda (%s alternatifini sağlayan) sadece bir alternatif var: %sBu bir özgür yazılımdır; kopyalama şartları için GNU Genel Kamu Lisansı
+sürüm 2 ya da daha yenisine bakın. Hiçbir garanti verilmez.
+Tetikleyici etkinleştirme ve işlemeroot değilken bile paketleri kurmayı/kaldırmayı deneTüm bağımlılık sorunlarını uyarılara dönüştürTüm bağımlılık sürümü sorunlarını uyarılara dönüştürİşiniz bittiğinde çıkmak için `exit' yazın.
+Paket kurma ve kaldırma hakkında yardım almak için dpkg --help yazın [*];
+Kullanıcı dostu paket yönetimi için 'apt' veya 'aptitude' araçlarını kullanın;
+dpkg ile kullanabileceğiniz hata ayıklama bayraklarının listesini görmek için
+dpkg -Dhelp yazın;
+Zorlama seçeneklerinin listesini görmek için dpkg --force-help yazın;
+*.deb dosyalarını değiştirme hakkında bilgi almak için dpkg-deb --help yazın;
+
+[*] ile işaretlenmiş komutlar çok miktarda çıktı üretir - 'less' ya da
+'more' araçları ile birlikte kullanın !*.deb paketlerine müdahale etme hakkında bilgi almak için dpkg-deb --help yazın;
+Paket kurma ve kaldırma hakkında bilgi almak için dpkg --help yazın.Yardım almak için dpkg-split --help komutunu kullanın.Bu yardımcı araç hakkında yardım almak için dpkg-trigger --help komutunu kullanın.Paket açılıyor: %s (%s) ...
+Paket açılıyor: %1$s (%3$s) üzerine (%2$s) ...
+Kullanılabilir paketler bilgisi %s ile güncelleniyor.
+Kullanım: %s [<seçenek> ...] <komut>
+
+Programın kullanım bilgileri için '%s --help' komutunu kullanın.Kullanıcı dostu paket yönetimi için 'apt' veya 'aptitude' kullanın.
+Dosyaları yönlendirme hakkında yardım almak için --help seçeneğini kullanın.Dosya istatistikleri bilgisi geçersiz kılma hakkında yardım için --help kullanın.Paket sorgulama hakkında yardım almak için --help seçeneğini kullanın.Arşivler için dpkg -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+kullanın (%s --help yazın).
+
+Yeni yapılandırma dosyaları için, eğer varsa öntanımlı ayarı
+kullan ve soru sorma. Öntanımlı bir ayar yoksa ve confold ya da
+confnew seçeneklerinden biri belirtilmediyse ne yapılacağı size
+sorulacaktırGeçerliliği denetlenebilen alanlar: paket adı, mimari adı, tetikleyici adı, sürüm numarası.
+
+Sürümdpkg'nin "%s" desteğine sahip bir sürümü henüz yapılandırılmamış.
+ Lütfen 'dpkg --configure dpkg' komutunu çalıştırdıktan sonra tekrar deneyin.
+Ekleme işleminde öntanımlı seçenekler --local ve --divert <özgün>.distrib
+şeklindedir.
+Kaldırma işleminde --package veya --local ve --divert seçenekleri
+belirtiliyorsa eşleşmelidir.
+Paket preinst/postrm betikleri --package ve --divert seçeneklerini her zaman
+belirtmelidir.
+Kaldırılabilir ya da temizlenebilirdi %s (%s) ...
+[öntanımlı=H][öntanımlı=E][öntanımlı yok]dpkg'ın düzgün çalışabilmesi için 'admindir', 'instdir'in içinde bulunmalıdır'%s' paketi de yapılandırılıyor ('%s' paketinin gereksinimi üzerine)%s alternatifi (%s bağ grubunun bir parçası) mevcut değil; alternatifler listesinden kaldırılıyor%s, %s alternatifine bağlı olduğu için ana alternatif olamaz%s ana alternatiftir ve %s alternatifine bağımlı olamaz%1$s, %3$s alternatifine bağımlı olduğu için %2$s alternatifine bağımlı olamaz%s alternatifi %s için kayıtlı değil; kaldırılmayacak%2$s için %1$s alternatifi kayıtlı değil; ayarlama yapılmıyoralternatif %s bağı hâlihazırda %s tarafından yönetiliyoralternatif %1$s bağı hâlihazırda (%3$s alternatifine bağımlı) %2$s tarafından yönetiliyoralternatif bağ olması gerektiği kadar mutlak değil: %salternatif adı (%s) '/' ve boşluk karakterleri içeremezalternatif yolu olması gerektiği kadar mutlak değil: %s'%s' paket adı birden fazla kurulu pakete işaret ediyor'%s' için mevcut bir geçersiz kılma dosyası var, ama --force seçeneği belirtildiği için bu dosya gözardı edilecek'%s' için mevcut bir geçersiz kılma var; işlem iptal ediliyor%s dosyasının tüm yönlendirmeleri%s dosyasının %s hedefine tüm yönlendirmeleriar üye adı '%s' çok uzunar üye boyutu %jd çok büyük<boş><yok><bilinmeyen>'%s' mimarisi geçerli değil: %s'%s' mimarisi önceden ayrılmış ve eklenemezmimari adı (%s) geçersiz: %s'%.250s' arşivi iki denetim öğesine sahip, pes ediliyor'%s' arşivinde '%.*s' üyesi '%s' üyesinden önce gelmemelidir, vazgeçiliyor'%s' arşivi normal bir dosya değil'%s' arşivinin '%.*s' üyesinde bilinmeyen bir sıkıştırma biçimi kullanılıyor, pes ediliyorarşiv bilinmeyen 0x%2$x türündeki '%1$.255s' nesnesini içeriyorarşiv denetim üyesi boyutuarşiv geçersiz bir biçim sürümüne sahip: %sarşivin denetim üyesi boyutu hatalı (%s)arşivin başlık kısmında hiç yeni satır yokarşiv bilgisi başlığı üyesiarşivin sürüm numarası %d.%d; lütfen dpkg-deb'in daha yeni bir sürümünü kullanınarşiv sihirli sürüm numarasıarşiv üye başlığıarşiv parça numarasıarşiv parça ofsetiarşiv parça numarasıarşiv toplam boyutuotomatik kip%s/%s alternatifinin otomatik güncellenmesi devre dışı bırakılmış; dokunulmayacakbaşka bir paketin tetikleyicilerinin işlenmesini bekliyor'%.*s' alanının değerinde boş satırbaşarısız kaldırma veya kurulum nedeniyle bozukkurulum sonrası betiği başarısız olduğu için bozuk'%s' konumunda bilinmeyen bir paket inşa ediliyor.'%s' paketi '%s' konumunda inşa ediliyor.bilinmeyen seçim (%s) kurulamıyorpaket bilgi dosyasına (%.255s) mmap çağrısı yapılamadıeski postrm betiği kaldırılamadıpaket bilgi dosyasına (%.255s) stat çağrısı yapılamadı'%s' arşivine ulaşılamıyorüye dosyası (%s) ar dosyasına (%s) eklenemiyor: %sbölünmüş paket parçası '%s' '%s' parçasına eklenemedi: %s'%s' dosyasının sonuna eklenemedisıkıştırmayı açma borusu kapatılamıyor'%s' dosyasının MD5 sağlama toplamı hesaplanamıyor: %s'%.255s' tar dosyasının MD5 sağlama toplamı hesaplanamıyor: %sçok baytlı '%s' dizisi bir geniş karakter dizgisine dönüştürülemiyorçok baytlı '%s' dizgisi bir geniş karakter dizgisine dönüştürülemiyor'%s' üyesi '%s' arşivine kopyalanamadı: %s'%s', '%s' olarak kopyalanamıyor: %sarşiv üyesi '%s' arşivinden kopyalanamıyor: %saçılmış '%.255s' verisi '%.255s' konumuna kopyalanamıyor: %sdizinler yönlendirilemedi'%s' dosyası kendine yönlendirilemedidenetim dosyası (%s) '%s' arşivinden çıkarılamadı: %spaket parçası (%s) açılamadı: %sgüvenlik etiketi dosya sapı alınamadı'%.255s' açılamadı ('%.255s' içinde)arşiv parça dosyası '%.250s' açılamadı'%s' dizini açılamadıdurum bildirim kanalı açılamadıyapılandırma dosyası dizini '%.250s' okunamadı (%.250s kaynaklı)info dizini okunamıyor'%.250s' kaldırılamadıveritabanı tarafından hâlâ kullanılmakta olan '%s' mimarisi kaldırılamıyoryabancı olmayan '%s' mimarisi kaldırılamıyoreski yedek yapılandırma dosyası '%.250s' kaldırılamadı (%.250s)eski yapılandırma dosyası '%.250s' (= '%.250s') kaldırılamadıeski dosyaların listesi kaldırılamadı'%s', '%s' olarak yeniden adlandırılamıyor%.250s için önbağımlılıklar sağlanamıyor (%.250s için isteniyordu)'%.255s' dizini taranamadıgüncelleme dizini (%.255s) taranamadıönbağımlılıklar sağlanamıyor:
+ %sbirincil grup tanımlayıcısı root olarak ayarlanamadı'%s' dosya nesnesinin güvenlik bağlamı ayarlanamadıgeliştirici betiğinin güvenlik bağlamı ayarlanamadı'%s' arşivinin arşiv denetim üyesi atlanamıyor: %s'%s' arşivinden arşiv üyesi atlanamaz: %s'%.255s' dosyası borudan atlanamıyor (değiştirilmiş veya hariç bırakılmış): %s'%.255s' dosyasının dolgu karakterleri atlanamadı: %s'%s' bölünmüş paket başlığı atlanamadı: %s'%.255s' dosyasına ('%.255s' dizinindeki) stat çağrısı yapılamıyor'%s' dosyasına stat çağrısı başarısız'%s' konumuna stat çağrısı başarısız olduolası izleyen sıfırlar dpkg-deb'den kaldırılamadı: %s'%c' karakteri kullanılamaz (sadece harfler, rakamlar ve '%s' karakterlerine izin veriliyor)sıkıştırılmış veri bozuktar üyesi sıkıştırılıyoryapılandırma dosyası (%.250s) pakette yokyapılandırma dosyasına (%.250s) stat çağrısı yapılamıyoryapılandırma dosyası (%s) normal bir dosya değilyapılandırma dosyası fark görselleştiriciyapılandırma dosyası adının (%s) sonunda boşluk karakterleri varyapılandırma dosyası adı (%s) mükerreryapılandırma dosyası adı (%s) çok uzun ya da dosyanın sonunda yeni satır karakteri yokyapılandırma dosyası kabuğuyapılandırma hatası: %s:%d: %s-%c (--%s) ve -%c (--%s) eylemleri bir arada kullanılamazyönlendirmeler çakışıyor (hem '%.250s' hem de '%.250s' içeriyor)paketler çakışıyor - %.250s kurulmayacak%2$s tarafından bozulabilecek %1$s paketinin yapılandırılmasının kaldırılması düşünülüyor ...%2$s paketini etkinleştirebilmek için %1$s temel paketinin
+ yapılandırılmasının kaldırılması düşünülüyor%2$s için %1$s paketinin kaldırılması düşünülüyor ...denetim dizini geçersiz izinlere (%03lo) sahip (geçerli izinler >=0755 ve <=0775 aralığındadır)denetim dizini bir dizin değildenetim dosyası '%s' mevcut değil'%2$s' paketinin denetim dosyası (%1$s) boş bir dosya adı içeriyor'%2$s' paketinin denetim dosyasının (%1$s) sonundaki yeni satır karakteri eksik'%2$s' paketinin denetim dosyasında (%1$s) eksik değer var'%2$s' paketinin denetim dosyasında (%1$s) eksik değer ayırıcı karakter var'control' dosyası %c karakterini barındırıyordenetim üyesiveritabanı biçim dosyası (%s) bozukgünlük dosyası '%s' açılamadı: %seski '%.250s' dosyasına stat çağrısı yapılamadı, dosya silinmeyecek: %s'%i' akış için açılamadımevcut %1$s alternatifi bilinmiyor, %3$s bağ grubu için %2$s alternatifine geçiliyortetikleyiciler işlenirken bir döngüyle karşılaşıldı:
+ döngüye yol açması olası paket zinciri şöyledir:veri üyesibağımlılık sorunları - tetikleyiciler işlenmeden bırakılıyorbağımlılık sorunları - yapılandırılmadan bırakılıyorbağımlılık sorunları - kaldırma yapılamıyorbağımlılık sorunları yüzünden %s paketi yapılandırılamıyor:
+%sbağımlılık sorunları yüzünden %s tetikleyicileri işlenemiyor:
+%sbağımlılık sorunları nedeniyle %s paketi kaldırılamıyor:
+%skullanımdan kalkan bağımlı bağ kaldırılıyor:  %s (%s)%s tarafından şuradan yönlendirme: %s
+%s tarafından şuraya yönlendirme: %s
+%s dosyasının %s kaynaklı yönlendirmesi%s dosyasının %s hedefine %s kaynaklı yönlendirmesiyönlendirme seçeneği yeni satır içeremez%s tarafından şuraya yönlendirilmiş: %s
+tamam
+%.250s, %.250s sürümünden %.250s sürümüne düşürülüyordpkg kurulu olarak kayıtlı değil, "%s" desteğinin varlığı denetlenemiyor!
+mükerrer beklenen tetikleyici paketi (%.255s)'%.250s' dosya adı ve '%.250s' paketi için mükerrer tetikleyici ilgi dosyasımükerrer yol (%s)mükerrer askıda tetikleyici adı (%.255s)mükerrer bağımlı bağ (%s)mükerrer bağımlı adı (%s)'%s' alanı için mükerrer değerkullanıcı tanımlı '%.*s' alanındaki değer mükerrer durumdaboş alan adıfgets conffiles dosyasını okurken boş dizgi döndürdüboş tetikleyici adlarına izin verilmiyoralan adından (%.*s) sonra dosya sonu karakteri'%.*s' alanının değerinden önce dosya sonu karakteri (sondaki yeni satır karakteri eksik)'%.*s' alanının değerinde dosya sonu karakteri (sondaki yeni satır karakteri eksik)yapılandırma dosyası istemi esnasında standart girdide dosya sonu karakteridevirsürüm numarasındaki devir sayısı boşsürüm numarasındaki devir sayısı negatifsürüm numarasındaki devir kısmı bir sayı değilsürüm numarasındaki devir sayısı çok büyükhata'%s' denetlenirken bir sorun yaşandı%.250s kapatılırken sorun yaşandı'%.255s' yapılandırma dosyası kapatılamadı'%.255s' kapatılırken/yazılırken bir sorun yaşandı'%.255s' aygıtı oluşturulurken bir sorun yaşandı'%.255s' dizini oluşturulurken bir sorun yaşandı'%.255s' sabit bağı oluşturulurken bir sorun yaşandıyeni yedek dosyası '%s' oluşturulurken sorun yaşandı'%.255s' borusu oluşturulurken bir sorun yaşandı'%.255s' sembolik bağı oluşturulurken bir sorun yaşandı'%.250s' dosyasının yokluğundan emin olunamadı'%s' kancası çalıştırılırken sorun yaşandı, çıkış kodu %ddizgi varbuf değişkeni olarak biçimlendirilirken bir sorun yaşandıgösterme biçimi hatalı: %syeni dosya (%s) kurulamadıconffiles dosyası açılırken sorun yaşandı'%s' yapılandırma dizini açılamadı%s arşivi işlenirken sorun yaşandı (--%s):
+ %s%s paketi işlenirken sorun yaşandı (--%s):
+ %s%.250s dosyası okunurken sorun yaşandı%2$.255s arşivinin %1$s kısmı okunurken bir sorun yaşandıconffiles dosyası okunamadıdpkg-deb borusundan okuma yapılırken bir sorun yaşandıtetikleyici erteleme dosyası (%.250s) okunurken sorun yaşandıeski yedek dosyası '%s' kaldırılırken sorun yaşandı'%.255s' dosyasının sahipliği ayarlanırken bir sorun yaşandı'%.255s' sembolik bağının sahipliği ayarlanırken bir sorun yaşandı'%.255s' dosyasının izinleri ayarlanırken bir sorun yaşandı'%.255s' konumunun zaman damgaları ayarlanırken bir sorun yaşandı%.250s açılırken bir sorun yaşandı%s sinyali serbest bırakılamadı: %s
+temizlik yapılırken sorun yaşandı'%s' yazılırken sorun yaşandı'%s' arşivi yazılamadı'%s' dosyasına yazılamadımimari listesine yazılırken bir sorun yaşandıstandart hataya yazılamıyor, yapılandırma dosyası isteminden önce fark edildibellek ayırma başarısız oldubaşarısız paketler listesinin yeni girdisi için bellek ayrılamadı: %s'%.255s' konumuna dizin değiştirme çağrısı başarısızdizine geçilemedi'%.250s' konumuna chroot çağrısı başarısız'%.255s' dosyası okunduktan sonra kapatılamadıdizin oluşturulamadıboru yaratma başarısız oldu%d dosya tanımlayıcısının dup çağrısı başarısızstd%s için dup çağrısı başarısızar üye dosyası (%s) için fstat çağrısı başarısızarşive fstat çağrısı yapılamadıyönlendirme dosyasına fstat çağrısı başarısızstatoverride dosyasına fstat çağrısı başarısızgeçici dosya oluşturulamadı (%s)yapılandırma dosyası (%.255s) okuma amacıyla açılamadı: %syönlendirme dosyası açılamadıpaket bilgi dosyası '%.255s' okumak için açılamadıstatoverride dosyası açılamadı'%.250s' paketinin tetikleyici ilgi listesi açılamadıokuma başarısız'%.255s' okunamadı ('%.255s' içinde)'%.255s' arşivi okunamadıbirleştirilmiş güncelleme dosyası %.255s silinirken sorun yaşandıgüncelleme dosyası %.255s kaldırılamadıgeçici dosyaya (%s) rewind çağrısı yapılamadıtetikleyici ilgi listesine (%.250s) rewind çağrısı yapılamadıseek çağrısı başarısız oldumevcut sembolik bağa (%.250s) stat çağrısı yapılamadı'%2$.250s' sembolik bağı için önerilen yeni hedefe (%1$.250s) stat çağrısı yapılamadıgeçici dosyaya (%s) stat çağrısı yapılamadıgeçici dosyanın (%s) bağı kaldırılamadı, %syazma başarısız'%2$.50s' paketinin "%1$s" veritabanı kaydı '%3$.250s' dosyasına yazılamadı'%.50s' paketinin ayrıntıları '%.250s' dosyasına yazılırken sorun yaşandıdosya adı tar borusuna yazılamadı (%s)fgets çağrısı '%.250s' dosyasından boş dizgi döndürüyoralan adı (%.*s) kısa çizgi ile başlayamazalan adından (%.*s) sonra iki nokta üst üste işareti gelmelidiralan genişliği aralığın dışında'%.250s' dosyasının format sürümü geçersiz: %s'%.250s' dosyası bozuk - %.250s eksik'%.250s' dosyası bozuk - MD5 sağlama toplamı hatalı '%.250s''%.250s' dosyası bozuk - arşiv başlığındaki sürüm numarası kısmı geçersiz'%.250s' dosyası bozuk - arşiv parça numarası hatalı'%.250s' dosyası bozuk - şuradaki rakam (kod %d) geçersiz: %s'%.250s' dosyası bozuk - ilk başlığın son kısmı hatalı'%.250s' dosyası bozuk - ikinci başlığın sonundaki kısım bozuk'%.250s' dosyası bozuk - yanlış sayıda arşiv parçası'%.250s' dosyası bozuk - hatalı dolgu karakteri (kod %d)'%.250s' dosyası bozuk - %.250s satırından sonra yeni satır eksik'%.250s' dosyası bozuk - arşiv parça numaraları arasında / karakteri yok'%.250s' dosyası bozuk - info kısmında boş karakterler'%.250s' dosyası bozuk - ikinci üye bir veri üyesi değil'%.250s' dosyası bozuk - verilen parça sayısına göre boyut yanlış'%.250s' dosyası bozuk - çok küçük'%.250s' dosyası bozuk - verilen boyutlar için parça sayısı yanlış'%.250s' dosyasının format sürümü %d.%d; daha yeni bir dpkg-split sürümü kullanın'%.250s' dosyası bir Debian ikili arşivi değil (dpkg-split kullanmayı deneyin)'%.250s' dosyası bir arşiv parçası değil'%s' dosyası bozuk - şuradaki tam sayı izin verilen aralığın dışında: %s'%s' dosyası bir arşiv parçası değil
+dosya biçimi algılanamadıbu dosya ASCII kipinde indirildiği için bozuk olarak
+ inmiş bir arşive benziyordosya adı yeni satır karakteri içeremezdosya tetikleyici kaydı geçersiz bir paket adından (%.250s) söz ediyor. (ilgilenilen dosya '%.250s'): %.250s"%s" dosya adı mutlak değil'%.250s' ve '%.250s' dosyaları aynı dosyanın parçaları değiller'%.250s' paketinin dosya listesi dosyası boş satır içeriyor'%.250s' paketinin dosya listesi dosyasının sonundaki yeni satır karakteri eksik'%.250s' paketinin dosyalarını listeleyen dosya bulunamadı; paketin hâlihazırda hiçbir dosyasının olmadığı varsayılıyor%2$s bağ grubu bozuk olduğu için %1$s alternatifi tekrar kuruluyorfork sistem çağrısı başarısız oldubiçim sürümünü takip eden geçersiz karakterlerbiçim sürümünde nokta yokformat sürümü numarasıbiçim sürümünün ana bileşeni boşbiçim sürümünün ikincil bileşeni boşbiçim sürümünün ana bileşeni çok büyükbiçim sürümünün ikincil bileşeni çok büyükbilinmeyen paketlerle karşılaşıldı; bu durum kullanılabilir paketler
+veritabanının güncelliğini yitirdiği ve bir ön yüz yöntemi ile
+güncellenmesi gerektiği anlamına gelebilir; ilgili soru ve yanıtlar
+için FAQ sayfasına bakın <https://wiki.debian.org/Teams/Dpkg/FAQ>'%s' dosyası için yaratılan ar başlığı bozuk'%s' grubu mevcut değilbaşlık çok büyük, bu da parçayı çok büyük yapıyor; paket adı veya sürümü aşırı
+derecede uzun olmalı, pes ediliyordenetim dosyaları hakkındaki %d uyarı gözardı ediliyordenetim dosyaları hakkındaki %d uyarı gözardı ediliyorbozukluk gözardı ediliyor, devam edilecek!çakışma gözardı ediliyor, devam edilecek!%s ile ilgili bağımlılık sorunu gözardı ediliyor:
+%sönbağımlılık sorunu gözardı ediliyor!%.250s paketi kurulu olmadığı için kaldırma isteği gözardı ediliyorsadece yapılandırma dosyaları kurulu olduğu için %.250s paketini kaldırma isteği
+gözardı ediliyor; dosyaları da kaldırmak için --purge seçeneğini kullanın'%s:%s' tanımlayıcısında geçersiz mimari adı: %sbeklenen paket adı (%.250s) geçersiz: %.250s%d. satırdaki paket adı geçersiz: %.250sbeklenen tetikleyicilerde geçersiz paket adı (%.255s): %s'%s%s%s' tanımlayıcısında geçersiz paket adı: %sgeçersiz askıda tetikleyici adı (%.255s): %sbilgi veritabanı biçimi (%d) geçersiz ya da çok yeni; daha yeni bir dpkg sürümünü deneyinbilgi dosyası (%s/%s) hiçbir paket ile ilişkili değil%.250s kurulumukurulu%s paketi %s betiği kuruldu%.250s paketini kurmak %.250s paketini bozar ve yapılandırmanın kaldırılmasına
+  izin verilmiyor (--auto-deconfigure seçeneğinin yardımı dokunabilir)%.250s paketini kurmak diğer yazılımların işlevini bozardâhilî hatadâhilî hataarşiv boyutundaki '%c' karakteri geçersiz, arşiv: '%.250s', üye '%.16s'alan genişliğinde geçersiz '%c' karakterirevizyon numarasında geçersiz karaktersürüm numarasında geçersiz karakter-%c seçeneği için geçersiz sıkıştırma seviyesi: %ldgeçersiz sıkıştırıcı parametreleri: %sdeb format sürümü geçersiz: %s-%c seçeneği için geçersiz tam sayı: '%.250s'--%s seçeneği için geçersiz tam sayı: '%.250s'tetikleyici adı (%.250s) geçersiz veya bilinmeyen bir söz dizimi kullanıyor (`%.250s' paketinin tetikleyici ilgi listesinde)tetikleyici erteleme dosyasında (%.250s) geçersiz paket adı (%.250s)geçersiz statoverride grup kimliği (%s)geçersiz statoverride kipi (%s)geçersiz statoverride kullanıcı kimliği (%s)geçersiz durumgeçersiz tetikleyici adı '%.250s': %.250s%s okunmaya çalışılırken bitirilmemiş bir satırla karşılaşıldı%s okunamadı: satır çok uzun ya da bitirilmemiş%s bağı hem ana bağ hem de bağımlı bağşuradan yerel yönlendirme: %s
+%s dosyasının yerel yönlendirmesi%s dosyasının %s hedefine yerel yönlendirmesişuraya yerel yönlendirme: %s
+yerel olarak şuraya yönlendirilmiş: %s
+uzun dosya adlarıgeliştirici betiği (%.50s) geçersiz izinlere (%03lo) sahip (geçerli izinler >=0555 ve <=0775 aralığındadır)geliştirici betiği (%.50s) normal bir dosya ya da bir sembolik bağ değilgeliştirici betiğine (%.50s) stat çağrısı yapılamazmalloc çağrısı başarısız oldu (%zu bayt)elle ayarlanmış kipana dosyaana bağ%2$s paketini sağladığı için %1$s paketini kaldırmak sorun olabilir ...boş bir dizgi olamazbellek kullanım sınırına erişildiyönlendirmede eşleşmezlik
+  '%s' kaldırılırken
+  '%s' ile karşılaşıldıpakette eşleşmezlik
+  '%s' kaldırılırken
+  '%s' ile karşılaşıldıkapatma parantezi eksikbirlikte kurulamayan ve birlikte kurulabilen paket örnekleri mevcut; bu durum büyük olasılıkla resmî olmayan dpkg sürümlerinden yükseltilme kaynaklıdırçoklu-mimaribirden fazla 'Çakışır' ve 'Değiştirir' değeribirlikte kurulamayacak birden fazla paket mevcut; bu durum büyük olasılıkla resmî olmayan dpkg sürümlerinden yükseltilme kaynaklıdır'%.250s' dosyası için birden fazla statoverride dosyası mevcutbir geliştirici betiğinden (ya da --by-package seçeneği ile) çağrılmalıdırmimari adı bir harf ya da rakamla başlamalıdırbir harf ya da rakam ile karakter ile başlamalıdır%s adı hem ana ad hem de bağımlı adbir eylem seçeneği belirtilmesi gerekiyoryeni %s paketi %s betiğialan adında (%.*s) yeni satır karakteriarşiv nesnelerinin adlarında yeni satır karakteri kullanılamaz (%.255s)dosya konumlarında (%s) yeni satır karakteri kullanılamaz'update-alternatives' dosyalarında yeni satır karakteri kullanılamaz (%s)denetim arşivinde 'control' dosyası yok!%s için hiçbir alternatif bulunmuyorherhangi bir geçersiz kılma mevcut değil'%.255s' dosyası hiç bir paket bilgisi içermiyor'%s' adında kurulu bir paket olmadığı için yapılandırma gerçekleştirilemiyor%s ile eşleşen bir paket bulunamadı%s örüntüsüne uyan bir konum bulunamadıhayır, %s temel bir pakettir ve %s paketini etkinleştirmek
+ için yapılandırılması kaldırılmayacakhayır, %s ile devam edilemez (--auto-deconfigure seçeneği yardımcı olabilir:
+%sdenetim alanının içeriği denetlenmeyecekkurulu değilkurulu değil ama yapılandırma dosyaları duruyorsembolik bağ %s kaldırılmıyor%s bir bağ ile değiştirilmiyorsürüm numarasında iki noktadan sonra karakter yok--%s seçeneğine verilen virgülle ayrılmış değerde (%.250s) boş bir paket adı vararşiv parça sayısı'--%s' kullanımdan kalkmıştır; kullanılamayan paketler otomatik olarak temizlenmektedir'%s' sıkıştırma türü artık kullanılmamaktadır; bunun yerine xz kullanın'%s' sıkıştırma türü artık kullanılmamaktadır; bunun yerine xz veya gzip kullanınkullanımdan kalkmış zorlama/reddetme seçeneği '%s''--%s' seçeneği kullanımdan kalkmıştıreski %s paketi %s betiğieski yapılandırma dosyası (%.250s) boş bir dizindi (ve şimdi silindi)eski dosya (%.250s) bazı yeni dosyalarla aynı! (hem '%.250s' hem de '%.250s'paketin eski sürümü '%.250s' ile başlayan çok uzun bir bilgi dosyası adına sahip'%s' alanında sadece tam olarak belirtilmiş sürümler kullanılabilir(%.255s içindeki) '%.255s' bileşenini açma işlemi beklenmeyen bir biçimde başarısız olduyeni temizlik girdisi için bellek yetersizçok argümanlı yeni temizlik girdisi için bellek yetersizyeni hata bağlamı için bellek yetersizhata bağlamı dışında, işlem iptal ediliyor--force seçeneği kullanımda olduğu için sorunlar gözardı ediliyor:%.250s paketi kurulmuş ve yapılandırılmış%.250s paketi yapılandırma için hazır değil
+ bu paket yapılandırılamaz (mevcut durum '%.250s')%.250s paketi tetikleyicilerin işlenmesi için hazır değil
+ (paket şu an '%.250s' durumunda ve askıda tetikleyici yok)%s %s yapılandırılamıyor çünkü %s paketi farklı bir sürümde (%s)%s yapılandırılamaz çünkü %s hazır değil (mevcut durum: '%s')%s paketi listeyi bilgi dosyası olarak içeriyor%s paketi yeniden kurulum gerektiriyor ama isteğiniz üzerine kaldırılacak%s paketi yeniden kurulum gerektiriyor, kaldırılmayacak%s paketi tutuluyordu ama yine de isteğiniz üzerine işlenecek'%s' paketi kullanılabilir değil'%s' paketi kurulu değil'%s' paketi kurulu değil ve hakkında bilgi yokpaket mimarisipaket mimarisi (%s) sistemin mimarisi (%s) ile uyuşmuyorpaket mimarisi eksik ya da boş bırakılmışpaket ('%.50s' ile başlayan) çok uzun bir denetim bilgisi dosya adı içeriyorpaket denetim bilgi dizini '%.250s' dizinini içeriyor'%.250s' dizinine yapılan rmdir çağrısı dizin olmadığını söylemedipaket denetim bilgisi açmapaket diğerlerini şuraya yönlendiriyor: %s
+paket alan değeri açmapaket dosyası MD5 sağlama toplamıpaket dosya sistemi arşiv açmapaket '%s' durumunda ama beklenen tetikleyiciler varpaket '%s' durumunda ama askıda olan tetikleyiciler varpaket fazlasıyla tutarsız bir durumda; paketi kaldırmadan
+ önce yeniden kurmalısınızpaket çok tutarsız bir durumda; yapılandırmaya teşebbüs
+ etmeden önce paketi yeniden kurmanız daha iyi olurpaket adı yeni satır karakteri içeremezpaket adıpaket adı (%s) geçersiz: %spaket adı küçük harf, rakam ya da `-+.` olmayan karakterler içeriyor%d. satırdaki paket ne durum ne de kullanılabilir paketler veritabanında mevcut değil: %.250spaket imza doğrulamasıpaket sürüm numarası%d. parça eksikparça dosyası (%.250s) normal bir dosya değilparça boyutu çok büyük ya da pozitif değilparça boyutu en az %d KiB olmalıdır (başlığa izin vermek için)geçti
+yapıştırdosya konumu yeni satır karakteri içeremezönbağımlılık sorunu - %.250s kurulmuyorönceliköncelik değeri belirlenen aralığın dışındaöncelik değeri bir tam sayı olmalıdır%s alternatifinin önceliği izin verilen aralığın dışında: %s%s önceliği: %sşurada okuma hatası: %.250s'%.250s' dosyası okunamadı'%.255s' yapılandırma dosyası okunamadıstandart girdide okuma hatasıyapılandırma dosyası istemi esnasında standart girdiden okuma hatasıpaket bilgi dosyası (%.255s) okunuyorpaket bilgi dosyası (%s) okunuyor: %sstatoverride dosyası (%.250s) okunuyortekrar bir araya getirilmiş paket dosyası%s ile ilgili %s, önbağımlılık sorunu:
+%s%s dosyası, %s paketi:
+%s%.250s kaldırmaveritabanı tarafından hâlâ kullanılan '%s' mimarisi kaldırılıyorelle seçilmiş alternatif kaldırılıyor - %s alternatifi otomatik kipe geçiriliyoryeniden adlandırma işlemi, '%s' dosyasının farklı bir dosya olan '%s'
+  ile değiştirilmesine yol açacağı için iptal ediliyoryeniden adlandırma: eski bağı kaldır (%s)bu işlem süper kullanıcı ayrıcalıklarına ihtiyaç duyardüzeltme numarası boştemizlik için rm komutuarama yapıldı ama hiç (*.deb örüntüsüyle eşleşen) paket bulunamadı<bilinmeyen>%s alternatifinin otomatik seçimi ayarlanıyorbirden fazla paket bilgi girdisi bulundu ama sadece bir girdiye izin veriliyordosya taşımakta kullanılan kabuk komutu%1$s oluşturulmayacak çünkü (%3$s bağ grubunun) ilişkili %2$s dosyası bulunamıyorbağımlı dosyabağımlı bağbağımlı bağ ana bağ (%s) ile aynıbağımlı adıkaynak dosya (%.250s) normal bir dosya değilpaket parçalarını bir araya getirmestatoverride dosyası boş satır içeriyorstatoverride dosyasının sonunda yeni satır karakteri yokdurumdurum günlükçüsüsondaki / karakteri kaldırılıyoralt süreç %s %d çıkış kodu ile sona erdi'%.250s' sembolik bağının boyutu değişmiş (eskiden: %jd şimdi: %zd)tetikleyici ilgi dosyasında (%.250s) söz dizimi hatasıstatoverride dosyasında söz dizimi hatasıtetikleyici erteleme dosyasındaki (%.250s) %d numaralı satır %zd karakterinde söz dizimi hatası '%s'bir adet argüman alır (tetikleyici adı)hedef bir dizin - denetim dosyası denetimi atlanamaz%d. parçanın birden çok sürümü var - en azından '%.250s' ve '%.250s'paketin yeni sürümünde herhangi bir betik yok - vazgeçiliyorbu temel bir pakettir ve kaldırılmamalıdırotomatik güncelleştirmeleri tekrar etkinleştirmek için '%s --auto %s' komutunu kullanınçok fazla hata oldu, işlem durduruluyorhata kurtarma esnasında çok fazla yuvalanmış hatayla karşılaşıldı'%.250s' dosyasında çok uzun bir satır veya eksik yeni satır karakteri vartreewalk kök dizini %s bir dizin değiltetikleyici ilgi listesi (%.250s) söz dizimi hatası içeriyor; paket adı (%.250s) hatalı: %.250stetikleyici adı (%s) geçersiz: %stetikleyici adı geçersiz karakter içeriyortetikleyici kayıtları henüz mevcut değiltetiklenmiştetikleyici ci dosyası (%.250s) tetikleyici adında (%.250s) geçersiz bir tetikleyici söz dizimi içeriyor: %.250stetikleyici ci dosyası bilinmeyen bir yönerge içeriyor (%.250s)tetikleyici ci dosyası bilinmeyen bir yönerge söz dizimi içeriyortetikleyici veri dizini henüz oluşturulmadıtetikleyiciler döngüye girdi, işlem yarıda kesiliyorbunun yerine yeni paketteki betik deneniyor ...%2$.250s %3$.250s paketinde de bulunan '%1$.250s' dosyasının üzerine yazılmaya çalışılıyor'%2$.250s' dosyasının yönlendirilmiş sürümü olan '%1$.250s' dosyasının üzerine yazmaya çalışıyor'%2$.250s' dosyasının yönlendirilmiş sürümü olan '%1$.250s' dosyasının üzerine yazmaya çalışıyor (paket: %3$.100s)%2$.250s %3$.250s paketindeki '%1$.250s' dizininin üzerine dizin olmayan bir dosya yazılmaya çalışılıyorpaylaşılan '%.250s' dosyasının üzerine yazılmaya çalışılıyor, dosya %.250s paketinin diğer örneklerinden farklıiki komut belirtildi: --%s ve --%sgirdi parça dosyası (%.250s) (tekrar) açılamadıhedef dosyanın (%.250s) sahibi değiştirilemedi'%.250s' dosyasının varlığı denetlenemedi'%s' dosyasının kilit durumu denetlenemedi'%.250s' arşivinin varlığı denetlenemedi'%.255s' yedek sembolik bağının sahibi değiştirilemedi'%.255s' dosyasının yeni sürümü kurulmadan önce temizlik esnasında sorun yaşandı'%s' dosyası kapatılamadıyeni '%.250s' dosyası kapatılamadıyeni tetikleyici erteleme dosyası (%.250s) kapatılamadı'%.250s' paketinin güncellenmiş durumu kapatılamadı'%.255s' oluşturulamadı'%.255s' oluşturulamadı ('%.255s' işlenirken)'%s' dosyası oluşturulamadıyeni dosya (%.250s) oluşturulamadıgeçici dizin oluşturulamadıtetikleyici durum dizini (%.250s) oluşturulamadıdenetim dosyası '%.250s' silinemedieski '%.250s' dizini silinemedi: %skullanılmış depo dosyası (%.250s) silinemedi'%.250s' dosyası atılamadı%s (%s) çalıştırılamadı%.250s dosyasına dolgu yapılamadı%.250s dosyası dolgu yapıldıktan sonra temizlenemedi'%s' dosyasına flush çağrısı yapılamadıyeni '%.250s' dosyasına flush çağrısı başarısız oldu'%.250s' paketinin güncellenmiş durumu temizlenemedikaynak dosyaya fstat çağrısı yapılamadı'%.250s' paketinin güncellenmiş durumu eşitlenemedi'%s' dizininin dosya tanımlayıcısı alınamadı%2$.250s çalıştırılmadan önce %1$s sinyali gözardı edilemedi'%.250s', '%.250s' olarak kurulamadıyeni (varsayılan) bilgi dosyası (%.250s) kurulamadıyeni bilgi dosyası (%.250s) '%.250s' olarak kurulamadıyeni tetikleyici erteleme dosyası (%.250s) kurulamadı'%.255s' dosyasının yeni sürümü kurulamadı'%.250s' paketinin güncellenmiş durumu kurulamadı%s kilitlenemediyeni sürümün kurulumundan önce '%.255s' için yedek bağ oluşturulamadı'%.255s' için yedek sembolik bağ oluşturulamadıyeni sürümün kurulabilmesi için '%.255s' taşınacaktı ama bir sorun yaşandı'%.255s' açılamadı'%s' dizini açılamadı'%s' dosyası açılamadıyeni depo dosyası '%.250s' açılamadıçıktı dosyası (%.250s) açılamadıkaynak dosya (%.250s) açılamıyorgeçici denetim dizini açılamadıtetikleyici 'ci' dosyası (%.250s) açılamadıtetikleyici erteleme dosyası (%.250s) açılamadıyeni tetikleyici erteleme dosyası (%.250s) açılamadı/oluşturulamadı'%.255s' zaman damgası ayrıştırılamadıdepo dizini '%.250s' okunamadıtetikleyici erteleme dosyası (%.250s) okunamadı%.250s dosyasının dosya tanımlayıcı bayrakları okunamadı'%.255s' bağı okunamadıparça dosyası '%.250s' okunamadı'%s' dosyası silinemedi'%.250s' dosyasının yedeği kaldırılamadıkopyalanmış kaynak dosyası (%s) kaldırılamadı'%.250s' dosyasının yeni açılmış olan sürümü kaldırılamadı'%.250s' dosyasının yeni kurulmuş olan sürümü kaldırılamadı'%.250s' dosyasının yedek kopyanın tekrar kurulabilmesi için dosyanın yeni kurulan sürümü silinecekti ama bir sorun yaşandıartık kullanılmayan bilgi dosyası (%.250s) kaldırılamadıyeni depo dosyası (%.250s), '%.250s' konumuna taşınamadıparça dosyası '%.250s' tekrar açılamadı'%.250s' dosyasının yedeği geri yüklenemedi'%.250s' güvenli biçimde kaldırılamadı'%.255s' güvenli bir biçimde kaldırılamadıeski '%.250s' dosyası güvenli biçimde kaldırılamadı: %sdolgu yapıldıktan sonra %.250s dosyasının başına gidilemedi"%s" veritabanı dosyasının tamponu ayarlanamadı%.250s dosyasının close-on-exec bayrağı ayarlanamadı'%.250s' konumunda çalıştırma izinleri ayarlanamadıhedef dosyanın (%.250s) kipi ayarlanamadıgeliştirici betiği için setenv çağrısı başarısız oldualt süreç için setenv çağrısı başarısız oldu%s '%.250s' için stat çağrısı başarısız oldu%s '%.250s' stat çağrısı yapılamadı: %s'%.250s' dosyasına stat çağrısı başarısız oldudenetim dizinine stat çağrısı yapılamadışu anda kurulu olan yapılandırma dosyasına (%.250s) stat çağrısı yapılamadıyeni dağıtık yapılandırma dosyasına (%.250s) stat çağrısı yapılamadıdiğer yeni dosyaya '%.250s' stat çağrısı yapılamadıgeri yüklenmiş '%.255s' dosyasının başka bir sürümü kurulmadan önce stat çağrısı yapılamadı'%.250s' kaynak dosyasına stat çağrısı yapılamadıtetikleyici erteleme dosyasına (%.250s) stat çağrısı yapılamadı'%s' dizini için sync çağrısı başarısız oldu'%.255s' dosyası diske yazılamadı'%s' dosyası için sync çağrısı başarısız olduyeni '%.250s' dosyasına sync çağrısı başarısız oldu'%.250s' paketinin güncellenmiş durumu kısaltılamadı%s dosyasının kilidi açılamadı'%s' dosyasına yazılamadıyeni dosyaya (%.250s) yazılamadıyeni tetikleyici erteleme dosyasına (%.250s) yazılamadıdurum dosyası tanımlayıcısına (%d) yazılamadı'%.250s' paketinin güncellenmiş durumu yazılamadışu satırda parantezler dengede değil: '%s'beklenmeyen bzip2 hatası%d. satırdaki paket ve seçimden sonra beklenmeyen veri%d. satırdaki paket adından sonra beklenmeyen dosya sonu karakteri%d. satır bitmeden önce beklenmeyen dosya sonu karakteri%s arşivinin %.255s kısmında beklenmeyen dosya sonu%d. satırdaki paket adında beklenmeyen dosya sonu karakteribeklenmeyen dosya ya da akış sonu'%.250s' dosyasında beklenmeyen dosya sonu%s okunmaya çalışılırken beklenmeyen dosya sonu karakteribeklenmeyen girdi sonu%d. satırdaki paket adından sonra beklenmeyen satır sonu karakteri%d. satırdaki paket adında beklenmeyen satır sonu karakteristatoverride dosyasında beklenmeyen satır sonubilinmeyen argüman '%s'bilinmeyen sıkıştırma stratejisibilinmeyen sıkıştırma stratejisi '%s'!bilinmeyen sıkıştırma türü '%s'!deb format sürümü bilinmiyor: %sbilinmeyen zorlama/reddetme seçeneği '%.*s'bilinmeyen seçenek (%s)bilinmeyen seçenek -%cbilinmeyen seçenek --%sbilinmeyen doğrulama çıktısı biçimi '%s'%d. satırdaki istenen durum bilinmiyor: %.250spaket açılmış ama yapılandırılmamışkurtarılamaz ciddi hata, işlem iptal ediliyorönceden tanımlı sıkıştırma ayarı desteklenmiyor'%s' sıkıştırma türü tek biçimli sıkıştırmayı desteklemezdosya başlığında desteklenmeyen seçenekler vardesteklenmeyen tutarlılık denetimi türügüncelleme dizini, adı çok uzun olan '%.250s' dosyasını barındırıyor (uzunluk=%d, azami=%d)güncelleme dizini farklı uzunluktaki dosya adlarına sahip dosyalar barındırıyor (%d ve %d)%s alternatifi güncelleniyor çünkü %s bağ grubu bağımlı bağları değiştirdi'%s' kullanıcısı mevcut değilkullanıcı tanımlı alan adı (%.*s) çok kısa%2$s (%3$s) alternatifini sağlaması için %1$s otomatik kipte kullanılıyor%2$s (%3$s) alternatifini sağlaması için %1$s elle ayarlanmış kipte kullanılıyor'%s' alanının değeri hatalı biçimlenmiş bir satır içeriyor (%.*s)'%s' alanı için bu değere bu bağlamda izin verilmez%s paketi doğrulanamadı!%s paketi doğrulanamadı; yine de isteğiniz üzerine kuruluyor<yok>%2$.250s paketinin %1$.250s sürümü zaten kurulu, atlanıyor'%s' sürümünü hatalı söz dizimine sahip'%s' sürümünü hatalı söz dizimine sahip: %ssürüm numarası rakam ile başlamıyorsürüm numarası boşsürüm dizgisinde boşluk karakterleri varsürüm dizgisi boşsürümlendirilmiş 'Provides'%s alt sürecini bekleme çağrısı başarısız oldu%s alt süreci wait çağrısı başarısız olduuyarı%s okunurken: %s%.250s kaldırılırken '%.250s' dizini boş olmadığı için kaldırılmadı%.250s kaldırılırken '%.250s' dizini kaldırılmadı: %s - dizin bir bağlama noktası olabilir mi?%.250s, %.250s sürümünden %.250s sürümüne düşürülmeyecek, atlanıyorevet, %2$s paketinin bozduğu %1$s paketinin yapılandırılması kaldırılacakevet, %2$s için %1$s kaldırılacakpaketleri, içinde geldikleri dosyanın adlarını değil paket adlarını kullanarak belirtmelisiniz
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/vi.gmo dpkg-1.20.7.1/po/vi.gmo
--- dpkg-1.20.7.1-orig/po/vi.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/vi.gmo	2021-06-09 18:25:16.096505171 -0500
@@ -0,0 +1,739 @@
+���|�< Q?!QaaQk�Q�/R��R&xS=�S&�ST-U.FUuU.�U�U �U4�U'V5CV-yV.�V0�V1W$9W4^W/�W�Wq�W(MX$vX�X�X:�X6Y1MY1Y!�Y2�Y(Z/Z?Z!YZ{Z�Z�Z�Z.�Z[S[`[q[�[9�[m�[)P\:z\9�\.�\']&F]m]3�]5�]�]�]v^[w^U�^)_>_O_\_q_Z�_�_�_��_=�`aa+a�:a=cRTc1�cD�cLdAkd'�d&�d(�d'%e+Me4ye!�e,�e9�e-7fef#�f�f$�f�f"g+g!Ig#kg�g�g�g�g�g"h2#h1Vh/�h�h.�h�h-iRGiH�iQ�iA5jewjf�jIDk7�k<�kl(lB?l�l�l�l
�l �l�l5m1Em@wm0�m�m�m#n!8nZnwnK�n7�n5o-No|o!�o�o'�o-�o-(p Vp5wp�p �p�p$q,+q.Xq.�q.�q�qHr6Nr(�r>�r$�r s3sRsYses�}s&t3t#Jt:nt-�u�u�u�uv*v<Cv#�v-�v-�v�w�w�w��w[�x�yg}
n~|��(��-ր�8 �<Y�.��Ł0܁3
�1A�s��������1\�*��J��2��7�&܅2�E6�V|�ӆ5�."�-Q�+�/��
ۇ%�/�*?�&j�!��+��B߈]"���!��M����2��>���"����4č.��5(�3^���G��8�,#�P�(o�������Gˏ�3�)P�$z�:��,ڐV� ^��*��Ƒܑ&�3�-F�+t�,��	͒ג�*�0�F� c�H��͓�ԓ���gX�j���+���4ԗ5	��?����ҙu~�&��A�{]�!ٛ,��*(�.S�������%� ��5ʞ� �,8�$e�.��>��*��;#�,_�����?���u��x�"Q�t�����9��(ӣX��3U�?��8ɤ2�15�,g�:��4ϥ5�4:�Ao�M��-��-�A�#[������ŧ ܧ1��8/�?h�B��6�"�&>�.e�!��!��5ة�+�A�V�j��	��9��.֪#�,)�V�u�%����%ګ-�1.�`�v�)��1��:�?,�&l���=��7�&�!@�.b�*��#��"�&�0*�:[�����@ȯ+	�;5�3q���°Aݰ�&>�-e�0��;ı0�(1�?Z�)��-Ĳ"��4+�E`�����,س"�!(�J�5i� ��8�����-'�5U�,��B��B��+>�Gj�$�� ׶:��;3�o���&����7ڷ�D0�cu�ٸ2�*�"C�3f�:��-չ&�*�D�\�r�"����Ⱥ(κ=��*5�J`���"������-/�]�)n�%��#��@�@#�'d�������ν���)�C�b�!��!��#ž�%�%,�'R�,z�����߿*��''�'O�w�!���� ��-��#�#>�+b�%��$���� ���/�B�"X�:{���F���3�P�$m���������#���/�!O�"q�:����5�� $�2E�x�%����0��*��$)�/N�~�6��V��"�(>�g�<w�.��)��(
�*6�+a���,��)��4�35�2i�4��;��<
�6J�:��7��@��05�;f�?��$��A�=I�$��0��!����b�}�c����:�<X�=��_��H3�|�������)��)�$,�Q��k�\��&L�&s�'�� ��7��t�2��-��'��4�.N�)}�G��-���	4�k>�/����>��%.�$T�#y�&��!����!�"'�^J�@�����#�?�%N�+t�7��!�����*�F�^�w�O��8��*�:�T�`�l�3x�����7��5�M�|c�
+����m�0y�G����)�!<�^�t�3��$��5�� �7�"K�4n���!��C��='�%e�
�� ��(����%�7&�^�Iv�!����G��PA�G��.��?	�#I�7m�#��+��2��Y(�f��L��M6�&��K��3��=+�i���=����4��F-�1t�;��&��	�(�G�%a�.��.��a��eG� ����D�� �?�V�&i�-��7�������."�Q�Z�s�"��������)���&8�"_�"��"����6���7�7I�B��H��&
�04�e�6|���$��4���O;�
+��
+����
+��%����%�*1�\�
c�q�+��7��+��!�$8�4]�F��@��6�1Q���,��R��'�$E�	j�Zt�4��2�'7�_�.{�D��G��Y7�Q��^��%B�+h�2��%��%��1�+E�Nq���!��3��*0�[�5u���"��$��2�+A�+m�,������"��$�C�!]�*���*��0��0"�&S�3z�4��5��)�,C�p�D��*��4��'�?�]�&v�#��#��%��(�.4�9c�'��*��.���!<�^�(t�(��4��4��[0�,��4��#��,�"?�"b�/��/��+��+-=*k&�!��� 12R0�&�B�# .Ds�� �1�.!H3j�*��64Q,�&�1� '-.U�4�1�+/E"b��"���
!!(Cl�:�"�#S)M}E�	(*	(S	*|	.�	0�	"
+I*
+t
+4�
+�
+(�
+"�
+ 8KiqB�`�9*'d#�`��
R��?��^|��4�V/[M�:�:OMa%�&�D�AP`B�D�59:o*�?�7M|g'�*H9h/�/�134Qh2��48:%s(���/�!0P$`,�I���?�_�RIJ�A�>)h<~C�� � ?� 3!E!a!u!�!�!p�!#"<"*Q"f|#�#
$$$y.&�&S('_|'g�'YD(B�(A�(<#)A`)C�)F�).-*A\*K�*D�*'/+1W+$�+.�+&�+0,#5,'Y,-�,�,�,�,�,/-'1-dY-S�-J.#].R�.4�.@	/eJ/W�/r0V{0��0�n1j2]}2Q�20-3�^3W�3';4c4y4�45�41�4O
5M]5F�5Y�5L6.i65�66�6/7(57\^7Q�7L
8>Z8�86�82�8S 9Kt96�97�9M/:*}:&�:�:1�:F ;>g;W�;]�;B\<��<Q?=P�=q�=OT>[�>+?,?3?B?�V?
8@F@@]@��@=,BjB�B�B�B6�BK
+C9VC@�C>�C�D�D�D[�DlJF/�F��K{�M~"O�P5�P=�P$5QGZQB�Q=�Q#R>?RB~RI�RS)SDS�MSE�T/UpJUU�U�V=�WI
+XvTX4�XYVY>gYH�YC�YE3ZyZ>�Z@�Z9[@O[6�[M�[|\t�\]B]|O]!�]\�]�K^�-`-b8FbRb?�bFcWYc!�cn�cKBd/�d&�d=�d#e#3e$Weh|e	�eT�e5Df0zf<�f7�f g*?gjg<�g�g�g8�gR6h7�h;�h5�h3i*@iki4�i�i*�i/j 1j
Rj�`jLk{Rl��lnm��n0�o;�o
+�o��p�qF�r.sN?s��sUtautU�tT-u/�uQ�u�x2�xJ�xy*;y;fy.�y<�yTzWczp�zS,{��{2k}�~��~hG(��ـ�%��a#�6�����ML�^��X��JR�G��:�Z �J{�YƄI �[j�oƅ?6�v�"��C��7��/�8�A�/Q�F��Nȇ^�bv�Gو5!�:W�A��8ԉ.
�T<�,��)������ 0�Q�Qj�,��.�=�FV�2��OЌA �Nb�K��Q��&O�+v�@��S�M7�U��/ۏ1�`=�a��.�B/�Mr�E��5�3<�>p�9��U�)?�#i�i��M��[E�N��4�1%�XW�*��7ەB�SV�Q��M��=J�i��7�D*�Io�1��[�aG�!��!˙:�P(�Ny�BȚF�/R�f�����@�MZ�:��K�E/�7u�S��=�5?�Uu�c˞#/�S�Rp�)ß\�2J�d}���u�O��Nޡ?-�Mm�\��G�6`��� ��أ&��R� n���,���¤4Z�i����9�'M�0u�-��NԦ#�=A�"�9��xܧoU�tŨ:�+G�:s�-��ܩ#��/$�T�%r�#��+��@�$)�*N�<y�?��9��)0�*Z�*��*��6۬2�E�/c�,��0��>�B0�:s�D��7�;+� g�/����կ�0�s1���k°<.�Bk�0��)߱ 	�*�"B�"e�E��β3�,�1D�>v�2��>�+'�AS���8��"�I�CR�.��Fŵ9�vF����6n�9��߷X�AL�F��5ոM�>Y�7��Lй:�GX�T��J��G@�k��]��GR�C��V޼n5�S��n��bg�2ʾa��e_�>ſV�;[�)��g��2)��\�;��`�Nz�`���*�Z��'�/.�-^�+��U��U�9d������=_�;��K��:%�:`�E�����F��<��86�Jo�?��B��q=�H������#�>��"�g&�@��;��5�)A�)k�5��4��;��<�\��0&�3W�9����1��=�UU�3������(�"E�"h���`��j�Tk��������O�)g�6��S��N�k����?�6P����V'�_~�>��5�,S�%��+��S��K&�Tr���!��-�P4�,��;��R��mA�8����B��E=�-��L��j��i�e��C��'.�bV�x��]2�D��\��32�Kf�4��m��5U�y���U��t��CP�a��D��B;� ~���M��
�<%�Zb�>�����+��/��+��$�;6�7r�9��t��sY�=��	�w���!����C��A*�Kl�	����8��L�	M�+W�-��8�����'�5G�.}�U��-�30�6d�-��@��"
+�-�ZE�s��r�6��N��(
�T6���4��J��7�kS�����A��2�DE�"��+��E��
�!-�4O�?��V��<�3X�+��[��a�Kv�?��b�5e�B��y��,X�'����b��=!�:_�1��"��<��T,�^��u��hV�{��,;�Ch�I��;��D2�Dw�a��h�&��0��?��F�f�D��%��/��*!�>L�C��6��G�N�"n�C��3��C	WMW�8�^6N�?�;$P`\�F>UK��l�>cT��%$<Aa5�0�9
+1D9vE�>�:5Lp,�1�8<:uJ�H�yD	<�	\�	5X
+B�
+/�
+8J:I�X�L(:uC�F�6;
.r
7�
4�
>hMS�J
+nUB�K:S5�1�;�P2�#�-�?�J1C|5�!�JDcA�A�F,Cs?�E�-=DkF�E�="],�#�7�?	I#i$�L�;�';3c?�I�B!fdg�s3 �D�@
?NI�J�*#TN�H�'�;0Y��&���a�tS�4P5�w�k`Z^�������Ri.�z
+��A�-�q��������&A(�5����_�K�CRc��>r�/T��40^eG9����g��Y����-��l���G�Q���U���}@��Ky�'�HaL� ��o��u�/������#���n��3���}����0E���9�w�k�zg��Mz�3s��F�h/��>,*?����b��cC�o�X@Fv�Y�B*U[B
S��
+�P����t��7��W�n�L~'[�:���s��������]�>�`��{H�0m��J�%�=,7����u���K����1�+�����2�k��'5,�Hr]`���|~�x# �Pj�������V��p����BV��*h���.����<�h2?����nX!�CI����Adg�j��������x��J���v��R{��:�V
���)<���E�w:�P���1p����y9��W��)a#d��I�D���8���&��;�tT�$��Q"����B�3;�	�	��6�����ZNm&=G�����6�<_��\�
2�$��/��VUk%�� L%�,��=�;)Ca����f����h\6Gq�_��:��1��sz
+!�������K�-M�D�rm.c��j�<��~�Z(E�YvfW+�[���t�M"o��P�c�.	��w�;o��m�8 ����H�4��3��Ag���O*�p#�2��7�	f}x=$b�}��]�XLd����?N��SE���Ol7j{+|�I�r�J���]���^(��Qb��iwu4����-6(���x@��"?��N4���S~yJ����v�SY���[����`�����OpI���
����ta5Wl��e|1!��8X���+D�n���N5�{'l
+�eR^0"��9sd�Oi������!������bDMu��F\����f�$�@e_��T���\�q�iT8�U|%Q&�>)Z���Fyq
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on %d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s suggests %s%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenVersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get security labeling handlecannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open security status notification channelcannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty field nameempty string from fgets reading conffilesempty trigger names are not permittedend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentgenerated corrupt ar header for '%s'group '%s' does not existheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete force/refuse option '%s'obsolete option '--%s'old conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepath may not contain newlinespre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filetakes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo-long line or missing newline in '%.250s'trigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion number does not start with digitversion string has embedded spacesversion string is emptyversioned Provideswait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.18.2
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2016-01-14 08:22+0700
+Last-Translator: Trần Ngọc Quân <vnwildman@gmail.com>
+Language-Team: Vietnamese <debian-l10n-vietnamese@lists.debian.org>
+Language: vi
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=1; plural=0;
+X-Generator: Gtranslator 2.91.7
+X-Poedit-SourceCharset: UTF-8
+X-Poedit-Basepath: ../
+
+ các bẫy chưa xử lý của gói mà có thể không thể giải quyết:
+
+Tập tin cấu hình “%s” không nằm trên hệ thống.
+Đang cài đặt tập tin cấu hình mới như bạn yêu cầu.
+
+Các tùy chọn gỡ lỗi có thể được trộn với nhau dùng phép lôgíc hoặc (bitwise-or).
+Chú ý là nghĩa và giá trị là các chủ đề để thay đổi.
+
+Hãy sử dụng ứng dụng “dpkg” để cài đặt và gỡ bỏ gói ra khỏi
+hệ thống của bạn, hoặc dùng ứng dụng thân thiện với người dùng hơn
+là “dselect” hay “aptitude” để quản lý gói. Chú ý là các gói được
+giải nén bằng lệnh “dpkg-deb --extract” sẽ bị cài đặt sai!
+
+CẢNH BÁO - dùng các tùy chọn được đánh dấu [!] có thể
+gây nên các lỗi nghiêm trong đối với việc cài đặt của bạn.
+Ép buộc các tùy chọn được đánh dấu [*] được bật theo mặc định.
+     Chưa sửa đổi kể từ lúc cài đặt.
+     Phiên bản trong gói bị trùng với phiên bản cài đặt cuối cùng.
+     không phải tập tin thường  %.255s
+   Bạn muốn làm gì vậy? Bạn có thể chọn:
+    Y hay I :  cài đặt phiên bản của nhà duy trì gói
+    N hay O :  giữ lại phiên bản hiện thời được cài đặt
+      D     :  hiển thị sự khác nhau giữa hai phiên bản
+      Z     :  chạy một hệ vỏ để phân tích tình cảnh
+  %.250s (phiên bản %.250s) đã hiện diện và %s.
+  %.250s (phiên bản %.250s) sẽ được cài đặt.
+  %.250s là %s.
+  %.250s hiện thời được cài đặt, nhưng là phiên bản %.250s.
+  %.250s chưa được cài đặt.
+  %.250s sẽ bị hủy cấu hình.
+  %.250s sẽ được cài đặt, nhưng là phiên bản %.250s.
+  %.250s sẽ bị gỡ bỏ.
+  %.250s đã được mở gói, nhưng chưa lần nào được cấu hình.
+  %.250s đã được mở gói, nhưng là phiên bản %.250s.
+  %.250s phiên bản được cấu hình mới nhất là %.250s.
+  %.250s cung cấp %.250s và hiện diện và %s.
+  %.250s cung cấp %.250s và sẽ được cài đặt.
+  %.250s cung cấp %.250s nhưng là %s.
+  %.250s cung cấp %.250s nhưng sẽ bị hủy cấu hình.
+  %.250s cung cấp %.250s nhưng sẽ bị gỡ bỏ.
+  %s (%s) cung cấp %s.
+  -?, --help                       Hiển thị trợ giúp.
+      --version                    Hiển thị phiên bản.
+
+  Gói %s cũng đợi xử lý bẫy.
+  Chưa cấu hình gói %s.
+  Chưa cài đặt gói %s.
+  Gói %s sẽ bị gỡ bỏ.
+  Gói %s mà cung cấp %s cũng đợi xử lý bẫy.
+  Chưa cấu hình gói %s mà cung cấp %s.
+  Chưa cài đặt gói %s mà cung cấp %s.
+  Gói %s mà cung cấp %s sẽ bị gỡ bỏ.
+  Phiên bản của %s trên hệ thống là %s.
+  Phiên bản của %s trên hệ thống, được cung cấp bởi %s là %s.
+  Phiên bản của %s cần cấu hình là %s.
+  liên kết %s là %s  liên kết phiên bản tốt nhất là “%s”  liên kết phiên bản tốt nhất không sẵn có  hiện tại không có liên kết  liên kết hiện nay chỉ đến %s  %s lệ thuộc là %s  %s lệ thuộc: %s %7jd byte,  %5d dòng    %c  %-20.127s %.127s
+ %d trong %s:  %d gói, từ các phần sau: %s (%jd byte)
+ %s (%s) làm hỏng %s và là %s.
+ %s (không phải là tập tin thường)
+ ==> Đã xóa (bởi bạn hay văn lệnh) kể từ lúc cài đặt.
+ ==> Tập tin trên hệ thống tạo bởi người dùng hoặc bởi một văn lệnh.
+ ==> Tập tin cũng nằm trong gói cung cấp bởi người duy trì gói.
+ ==> Đang giữ tập tin cấu hình cũ làm mặc định.
+ ==> Đã bị sửa đổi (bởi người dùng hay văn lệnh) kể từ lúc cài đặt.
+ ==> Nhà phân phối gói đã cung cấp một phiên bản đã cập nhật.
+ ==> Đang sử dụng tập tin cũ hiện thời như bạn yêu cầu.
+ ==> Đang dùng tập tin cấu hình mới làm mặc định.
+ ==> Đang sử dụng tập tin mới như bạn yêu cầu.
+ Gói %s: có phần  Hành vi mặc định là cài đặt phiên bản mới.
+ Hành động mặc định là giữ phiên bản hiện thời.
+ và  phụ thuộc vào %d chương trình cần thiết không thể tìm thấy trong biến PATH (lưu các đường dẫn đến thư mục chứa phần mềm) hoặc nó không thực thi được
+%s%d tập tin và thư mục hiện đã được cài đặt.)
+thiếu %d thành phần điều khiển yêu cầu%s (tiến trình con): %s
+%s — ưu tiên %d%s làm hỏng %s%s xung đột với %s%s bị hỏng: %stùy chọn gỡ lỗi %s, --debug=<bát-phân> hoặc -D<bát-phân>:
+
+ Số      Ref. trong nguồn  Mô tả
+%s phụ thuộc vào %s%s tăng cường %scác tùy chọn ép buộc cho %s - điều khiển cách ứng xử khi trục trặc nảy sinh:
+  cảnh báo nhưng vẫn tiếp tục:  --force-<thứ>,<thứ>,…
+  dừng lại với lỗi:             --refuse-<thứ>,<thứ>,… | --no-force-<thứ>,…
+ Các “thứ” ép buộc là:
+%s hầu như chắc chắn là chưa được cài đặt; lờ đi bất kỳ phụ thuộc vào nó%s phụ thuộc sẵn vào %s%s khuyên %s%s gợi ý %s%s:
+    Phiên bản định dạng phần:       %d.%d
+    Phần của gói:                   %s
+        … phiên bản:              %s
+        … kiến trúc:              %s
+        … tổng kiểm tra MD5:      %s
+        … kích thước:             %jd byte
+        … chia tách mỗi:          %jd byte
+    Số phần:                        %d/%d
+    Chiều dài phần:                 %jd byte
+    Khoảng bù (offset) phần:        %jd byte
+    Cỡ phần tập tin (vùng đã dùng): %jd byte
+
+%s: tập tin cấu hình “%.250s” không phải là một tập tin tiêu chuẩn
+hay liên kết mềm (= “%s”)%s: tập tin cấu hình “%.250s” trở thành tên tập tin thoái hóa
+ (“%s” là liên kết mềm tới “%s”)%s: tập tin cấu hình “%s” là một liên kết quẩn tròn
+ (= “%s”)%s: có vấn đề quan hệ phụ thuộc, nhưng vẫn cấu hình như bạn yêu cầu:
+%s%s: có vấn đề về quan hệ phụ thuộc, nhưng vẫn xử lý bẫy như bạn yêu cầu:
+%s%s: vấn đề quan hệ phụ thuộc, nhưng vẫn gỡ bỏ như bạn yêu cầu:
+%s%s: lỗi đóng kết dữ liệu nhập với luồng nén bzip2%s: lỗi đóng kết dữ liệu nhập với luồng nén gzip%s: lỗi buộc dữ liệu xuất với luồng nén bzip2%s: lỗi đóng kết dữ liệu xuất với luồng nén gzip%s: gặp lỗi khi liên kết “%.250s” tới “%.250s”: %s%s: gặp lỗi khi gỡ bỏ “%.250s” (trước khi ghi đè): %s%s: gặp lỗi khi gỡ bỏ “%.250s”: %s%s: gặp lỗi khi gỡ bỏ bản sao lưu cũ “%.250s”: %s%s: gặp lỗi khi gỡ bỏ phiên bản phát hành cũ “%.250s”: %s%s: gặp lỗi khi đổi tên “%.250s” thành “%.250s”: %s%s: lỗi đọc nội bộ của bzip2%s: lỗi đọc nội bộ của bzip2: “%s”%s: lỗi ghi nội bộ của bzip2%s: lỗi ghi nội bộ của bzip2: “%s”%s: lỗi đọc nội bộ của gzip%s: lỗi đọc nội bộ của gzip: “%s”%s: lỗi ghi nội bộ của gzip%s: lỗi ghi nội bộ của gzip: %s%s: lỗi ghi nội bộ của gzip: “%s”%s: lỗi đóng lzma%s: lỗi lzma: %s%s: lỗi đọc lzma%s: lỗi ghi lzma%s: lỗi chép pass-through (chuyển qua): %s%s: không thể mở %s để băm: %s%s: không thể readlink (thêm liên kết lại) tập tin cấu hình “%s”
+ (= “%s”): %s%s: không thể lấy thống kê tập tin cấu hình “%s”
+ (= “%s”): %s“%.255s” không chứa thành phần điều khiển nào “%.255s”“%s” xung đột với “%s”“%s” chứa giá trị Ưu tiên “%s” được người dùng xác địnhtùy chọn “%s” không chấp nhận giá trịtrường “%s”, tên gói không hợp lệ “%.255s”: %strường “%s”, thiếu tên kiến trúc, hoặc gặp rác ở nơi cần là tên kiến trúctrường “%s”, tên gói bị thiếu, hoặc rác ở nơi chờ đợi tên góitrường “%s”, tham chiếu đến “%.255s”:
+ “%c” là cũ, dùng “%c=” hay “%c%c” thay thếtrường “%s”, tham chiếu đến “%.255s”:
+ quan hệ phiên bản sai %c%ctrường “%s”, tham chiếu đến “%.255s”:
+ ngầm định là khớp chính xác trên số phiên bản, đề nghị dùng “=” thay thếtrường “%s”, tham chiếu đến “%.255s”:
+ giá trị phiên bản bắt đầu với ký tự không phải chữ số, đề nghị thêm dấu cáchtrường “%s”, tham chiếu đến “%.255s”: tên kiến trúc không hợp lệ “%.255s”: %strường “%s”, tham chiếu đến “%.255s”: phiên bản chưa được kết thúctrường “%s”, lỗi cú pháp ở sau tham chiếu đến gói “%.255s”tùy chọn “%s” yêu cầu một giá trị“%s” không nằm trong PATH (lưu các đường dẫn đến thư mục chứa phần mềm) hoặc không thực thi được(Đang ghi lưu sự biến mất của %s, mà đã hoàn toàn được thay thế.)
+(Đang đọc cơ sở dữ liệu … (không có mô tả)(tổng cộng %jd byte)
+, lõi bị đổtùy chọn “-%c” không chấp nhận giá trịtùy chọn “-%c” yêu cầu một giá trị“--%s --pending” (hoãn) không chấp nhận đối số khác tùy chọn--%s --recursive (đệ quy) cần ít nhất một tham số đường dẫn--%s vẫn chưa hỗ trợ đọc .deb từ đầu vào tiêu chuẩn“--%s” cần một đối số là tập tin .deb và các đối số là thư mục“--%s” yêu cầu <tên>“--%s” yêu cầu <tên> <đường_dẫn>“--%s” cần một đối số là tập tin .deb“--%s” cần một đối số kiểu <thư_mục>“--%s” yêu cầu một đối số <tệp>“--%s” cần một đối số đơn“--%s” cần một thư mục đích.
+Có lẽ bạn muốn dùng “dpkg --install” ?“--%s” cần một tên gói hợp lệ nhưng “%.250s” không phải: %s“--%s” cần ít nhất một đối số kiểu tập tin kho lưu gói“--%s” cần ít nhất một đối số kiểu tên gói--%s cần bốn đối sốtùy chọn “--%s” không chấp nhận giá trịtùy chọn “--%s” yêu cầu một giá trịtùy chọn “--%s” yêu cầu một đối số hệ bát phân nguyên dương“--%s” yêu cầu một hay nhiều đối số kiểu tập tin phần--%s cần chính xác một đối số Packages-file“--%s” chấp nhận nhiều nhất hai đối số“--%s” chấp nhận nhiều nhất hai đối số (.deb và thư mục)--%s chỉ chấp nhận một đối số--%s cần chính xác hai đối số--%s không nhận đối số“--%s” nhận một đối số là tên gói“--%s” chỉ chấp nhận một đối số (tên tập tin .deb)--%s được dùng với toán tử đã lạc hậu “%s”“--auto” (tự động) cần chính xác một đối số kiểu tập tin phần“--auto” (tự động) cũng cần sử dụng tùy chọn “--output” (kết xuất)“--compare-versions” (so sánh phiên bản) có quan hệ sai“--compare-versions” (so sánh phiên bản) chấp nhận ba đối số: <version> (phiên bản 1) <relation> (quan hệ) và <version> (phiên bản 2)“--search” cần ít nhất một đối số là kiểu mẫu tên tập tin“--split” (chia tách) cần một đối số kiểu tên tập tin nguồn“--split” (chia tách) chấp nhận nhiều nhất một tên tập tin nguồn và một tiền tố đíchtùy chọn “--update” (cập nhật) đưa ra nhưng %s không tồn tạitùy chọn “--update” (cập nhật) vô ích khi có dùng “--remove” (gỡ bỏ)… có vẻ như việc đã làm được…/%s; tuy nhiên:
+<nén> từ tar -cf<deb> là tên tập tin của kho nén định dạng Debian.
+<tập_tin_q> là tên của thành phần tập tin kiểu quản trị.
+<trường_đk> là tên của trường trong tập tin “điều khiển” chính.
+
+<giải nén><dpkg-deb --info pipe><liên_kết> và <đường_dẫn> không thể là trùng nhau<liên_kết> là liên kết mềm mà nó chỉ tới %s/<name>.
+  (v.d. /usr/bin/pager)
+<tên> là tên chủ cho nhóm liên kết này.
+  (v.d. pager)
+<đường_dẫn> là vị trí của một tập tin đích thay thế nào đó.
+  (e.g. /usr/bin/less)
+<mức_ưu_tiên> là một số nguyên:
+   con số lớn hơn thì đặt mức ưu tiên cao hơn trong chế độ tự động.
+
+<bộ mô tả trạng thái gói và tập tin tiến hành><đầu lỗi tiêu chuẩn><đầu vào tiêu chuẩn><đầu ra tiêu chuẩn>Đang thêm “%s”
+Cho phép sự cài đặt của các gói xung độtCái thay thế %s chưa thay đổi vì sự chọn %s không sẵn sàng.Luôn cài đặt các tập tin cấu hình còn thiếuLuôn dùng các tập tin cấu hình mới, không cần hỏiLuôn dùng các tập tin cấu hình cũ, không cần hỏiMột tiến trình khác đã khóa cơ sở dữ liệu để ghi nhớ, có thể là đang sửa đổi nó.
+Một số vấn đề theo đây có thể do trường hợp đó.
+Kiến trúcĐang xác thực %s …
+Lệnh:
+  --add <chủ_sở_hữu> <nhóm> <chế_độ> <đường_dẫn>
+                           thêm đường dẫn vào cơ sở dữ liệu
+  --remove <đường-dẫn>     gỡ bỏ đường dẫn khỏi cơ sở dữ liệu này
+  --list [<mẫu_glob>]      liệt kê những sự đè lên hiện thời trong cơ sở dữ liệu
+
+Lệnh:
+  --check-supported                Kiểm tra nếu dpkg đang chạy có hỗ trợ bẫy không.
+
+Lệnh:
+  --install <liên_kết> <tên> <đường_dẫn> <mức_ưu_tiên>
+    [--slave <liên_kết> <tên> <đường_dẫn>] …
+                           thêm vào nhóm thay thế vào hệ thống.
+  --remove <tên> <đường_dẫn>
+                           gỡ bỏ <đường dẫn> từ nhóm <tên> thay thế.
+  --remove-all <tên>       gỡ bỏ <tên> nhóm này khỏi hệ thống thay thế.
+  --auto <tên>             chuyển đổi liên kết chủ tên này sang chế độ tự động.
+  --display <tên>          hiển thị thông tin về nhóm <tên>.
+  --query <tên>            phiên bản cho máy phân tích được của “--display <tên>”.
+  --list <tên>             hiển thị tất cả các đích của nhóm <tên>.
+  --get-selections         liệt kê các tên thay thế chủ và trạng thái của chúng.
+  --set-selections         đọc trạng thái của gói thay thế từ đầu vào tiêu chuẩn.
+  --config <tên>           hiển thị các cái thay thế nhóm tên này,
+                             và nhắc người dùng chọn cái thay thế.
+  --set <tên> <đường_dẫn>  đặt đường dẫn này như là cái thay thế cho tên này.
+  --all                    gọi “--config” (cấu hình) với mỗi cái thay thế.
+
+Lệnh:
+  -s|--split <tập_tin> [<tiền_tố>] Chia tách một kho nén.
+  -j|--join <phần1> <phần2> …      Nối các phần lại với nhau.
+  -I|--info <phần> …               Hiện thông tin về phần.
+  -a|--auto -o <toàn_bộ> <phần>    Tự động tích lũy các phần.
+  -l|--listq                       Liệt kê các phần chưa khớp.
+  -d|--discard [<tên_tập_tin> …]   Hủy các phần chưa khớp.
+ 
+Lệnh:
+  [--add] <tệp>            thêm một sự làm trệch đi.
+  --remove <tệp>           gỡ bỏ sự làm trệch đi.
+  --list [<mẫu_glob>]      hiển thị các sự làm trệch đi về tập tin.
+  --listpackage <tệp>      hiển thị gói nào làm trệch tập tin đi.
+  --truename <tệp>         làm trở lại tập tin bị làm trệch đi.
+
+ Toán tử so sánh cho tùy chọn “--compare-versions” (so sánh hai phiên bản):
+  lt le eq ne ge gt       (coi phiên bản rỗng là cũ hơn bất kỳ phiên bản nào);
+  lt-nl le-nl ge-nl gt-nl (coi phiên bản rỗng là mới hơn bất kỳ phiên bản nào);
+  < << <= = >= >> >       (chỉ để tương thích với cú pháp tập tin điều khiển.
+ 
+Tập tin cấu hình “%s”
+Tập tin cấu hình “%s” (hiện là “%s”)
+Cấu hình mọi gói mà nó có thể hỗ trợ gói nàyĐang hủy cấu hình %s (%s) …
+Đang hủy cấu hình %s (%s), để cho phép gỡ bỏ %s (%s) …
+Chương trình quản lý gói %s của Debian, phiên bản %s.
+Tiện ích xử lý bẫy %s của Debian, phiên bản %s.
+Debian %s phiên bản %s.
+Hậu phương kho lưu gói Debian “%s” phiên bản %s.
+Chương trình quản lý gói Debian “%s”, phiên bản %s.
+Công cụ chia tách/nối lại gói Debian “%s”; phiên bản %s.
+Đã xóa %s.
+Các phần phụ thuộc và xung độtMô tảNhững ký tự viết HOA hay trong () là dạng viết tắt ở ba cột đầu tiên:
+1. Mong muốn =(u)không rõ/càI đặt/(r)gỡ bỏ/(p)tẩy/(h)giữ lại
+2. Trạng thái=(n)chưa cài/đã càI/tập tin Cấu hình/(u)đã giải nén/
+              (f)nửa cấu hình/(h)nửa cài đặt/(w)đợi bẫy/(t)bẫy bị hoãn
+3. Lỗi?      =(để trống)/(r)yêu-cầu-cài-đặt-lại
+Không thực hiện các thao tác I/O an toàn khi giải nén góiGặp lỗi khi xử lý:
+Trạng thái thoát:
+  0 = ok
+  1 = với --auto, tập tin không phải là một phần
+  2 = trục trặc
+Tập tin “%.250s” không phải là phần của một kho được chia nhỏ.
+Cú pháp định dạng:
+  Định dạng là chuỗi sẽ được xuất cho mỗi gói.
+  Định dạng có thể gồm các dãy thoát chuẩn:
+	\n		dòng mới
+	\r		xuống dòng
+	\\		gạch ngược chuẩn
+  Có thể gồm thông tin về gói bằng cách chèn tham chiếu biến
+  đến trường gói, dùng cú pháp “${var[;width]}”.
+  Trường được canh lề phải, nếu độ rộng âm thì canh lề trái).
+Đại để, thông tin nào về tiến trình hữu dụngLờ yêu cầu gỡ bỏ sự làm trệch hướng chia sẻ “%s”.
+Lờ đi các yêu cầu đổi tên tập tin “%s” được sở hữu bởi gói làm trệch hướng “%s”
+Thông tin về %d gói đã được cập nhật.
+Quá lãng phíCài đặt một gói thậm chí ngay cả khi không qua kiểm tra độ tin cậyCài đặt ngay cả khi nó có thể làm hỏng gói khácĐang cài đặt phiên bản mới của tập tin cấu hình %s …
+Gọi và theo dõi trạng thái của các văn lệnh bảo trìTập tin rác vẫn còn nằm trong thư mục kho chứa (depot):
+Đang để lại “%s”
+Quá nhiều kết xuất của gói-phụ-thuộc/xung-độtQuá nhiều phí phạm chẳng hạn như thư mục dpkg/infoQuá nhiều kết xuất cho mỗi tập tin cấu hìnhQuá nhiều kết xuất cho từng tập tin được xử lýQuá nhiều kết xuất liên quan đến các bẫygặp kết thúc tập tin dạng MSDOS (^Z) trong tên trường “%.*s”gặp ký tự kết thúc tập tin dạng MSDOS (^Z) trong giá trị của trường “%.*s” (thiếu dòng mới à?)Nhiều bản sao của gói %s đã được mở gói
+trong lần chạy này! Chỉ cấu hình nó một lần.
+TênKhông có sự làm trệch “%s” nào nên không gỡ bỏ.
+Chú ý: biến PATH của siêu người dùng thường nên chứa “/usr/local/sbin”, “/usr/sbin” và “/sbin”Không có gì cần cấu hình.Đề nghị thay thế tập tin cấu hình bằng cái có phiên bản không mới hơnTùy chọn:
+  --admindir=<thư_mục>             Dùng thư mục này thay cho %s.
+  --by-package=<tên_gói>           Có quyền cao hơn sự đợi bẫy
+                                     (bình thường được dpkg đặt).
+  --await                          Gói cần đợi xử lý.
+  --no-await                       Không có gói nào cần đợi xử lý.
+  --no-act                         Chỉ thử, không phải thật, sẽ không thay đổi gì.
+
+Tùy chọn:
+     --depotdir <thư_mục>          Dùng <thư_mục> thay cho %s/%s.
+  -S|--partsize <cỡ>               Theo KiB, cho -s (mặc định là 450).
+  -o|--output <tập_tin>            Tập tin, cho -j (mặc định là
+                                      <gói>_<phiên bản>_<kiến trúc>.deb).
+  -Q|--npquiet                     Không xuất chi tiết khi -a không phải là phần.
+     --msdos                       Tạo ra các tên tập tin kiểu 8.3.
+
+Kết xuất cho từng tập tin cấu hìnhKết xuất cho từng tập tin đã được xử lýGhi đè một tập tin “diverted” bằng một phiên bản “undiverted”Ghi đè lên tập tin từ một gói bằng một cái khácGhi đè một thư mục của gói bằng tập tin của cái khácBiến PATH thiếu các chương trình quan trọng, trục trặc có thể xảy raBiến PATH chưa được đặtGói %s bị giữ lại nên không thao tác nó. Dùng “--force-hold” (buộc giữ lại) để đè.
+Gói %s được liệt kê nhiều lần nên chỉ xử lý một lần.
+Gói “%s” không chứa tập tin nào (!)
+Gói chưa được lắp ráp lại:
+Phần %d của gói %s đã được ghi lưu (vẫn muốn Đường dẫnTrường “phụ thuộc sẵn”Đang chuẩn bị mở gói %s …
+Bấm phím <Enter> để giữ lựa chọn mặc định[*], hoặc gõ số thứ tự lựa chọn: Ưu tiênXử lý ngay cả khi các gói có kiến trúc sai hoặc không có kiến trúcXử lý thậm chí các gói với phiên bản saiĐang xử lý các bẫy dành cho %s (%s) …
+Tiến trình bị dừng lại vì có quá nhiều lỗi.
+Đang tẩy các tập tin cấu hình cho %s (%s) …
+Nối gói %s từ %d phần: Đã ghi lưu thông tin về %s từ %s.
+Gỡ bỏ một gói cơ bảnGõ bỏ các gói, cái mà được yêu cầu cài đặtĐang gỡ bỏ %s (%s) …
+Đang gỡ bỏ “%s”
+Thay thế một gói bằng một phiên bản cũ hơnĐược thay thế bằng các tập tin trong gói đã cài đặt %s (%s) …
+Đang thay thế thông tin gói sẵn có, bằng %s.
+Đang thay thế các tập tin trong gói cũ %s (%s) …
+Chọn gói chưa được chọn trước đây %s.
+Lựa chọnĐặt các tùy chọn ép buộc (force)Đang cài đặt %s (%s) …
+Kết xuất từ các bẫy nhiều khủng khiếpBỏ qua dòng sai: %sBỏ qua cái thay thế không hiểu %s.Bỏ qua gói không được lựa chọn %s.
+Cắt gói %s thành %d phần: Trạng tháiNhững gói sau đang đợi chức năng xử lý các bẫy
+chúng đã kích hoạt trong gói khác.
+Chức năng xử lý này có thể được yêu cầu dùng:
+ * dselect
+ * dpkg --configure --pending
+ * dpkg --triggers-only
+Những gói sau ở trong tình trạng hỗn loạn do vấn đề nghiêm trọng
+trong tiến trình cài đặt. Các gói này phải được cài đặt lại để chúng
+(và tất cả những gói phụ thuộc vào chúng) hoạt động được:
+Các gói sau đây thiếu tập tin điều khiển trong
+cơ sở dữ liệu, chúng cần được cài đặt lại:
+Các gói sau đây thiếu tập tin điều khiển lưu giá trị băm md5sums
+trong cơ sở dữ liệu, chúng cần phải được cài đặt lại:
+Những gói sau chỉ được cấu hình một nửa, có thể do vấn đề khi cấu hình
+chúng lần thứ nhất. Việc cấu hình nên được thử lại bằng lệnh
+“dpkg --configure <tên_gói>”
+hoặc tùy chọn trình đơn “cấu hình” trong dselect:
+Những gói sau chỉ được cài đặt một nửa, do vấn đề trong tiến trình cài đặt.
+Rất có thể thử lại chạy xong tiến trình cài đặt; có thể gỡ bỏ các gói
+bằng dselect hay lệnh “dpkg --remove”:
+Những gói sau đây không có kiến trúc:
+Những gói sau đây có kiến trúc không hợp lệ:
+Các gói sau đây không hiểu được kiến trúc ngoại lai, các mà sẽ là nguyên nhân
+phát sinh gói phụ thuộc trên front-ends. Nó có thể được sửa bằng cách đăng ký
+kiến trúc ngoại lai bằng lệnh dpkg --add-architecture:
+Những gói sau đã được bẫy, nhưng chưa xử lý bẫy nào cả.
+Xử lý bẫy này có thể được yêu cầu dùng:
+ * dselect
+ * dpkg --configure --pending
+ * dpkg --triggers-only
+Những gói sau đã được mở gói nhưng chưa được cấu hình.
+Các gói này phải được cấu hình bằng lệnh “dpkg --configure”
+hoặc tùy chọn trình đơn “cấu hình” trong dselect,
+để chúng hoạt động được:
+Ở đây có %d sự lựa chọn gói thay thế %s (cung cấp %s).Không có chương trình nào cung cấp %s.Chỉ có một cái thay thế trong nhóm liên kết (cung cấp %s) %s: %sĐây là phần mềm tự do; xem Giấy Phép Công Cộng GNU (GPL)
+phiên bản 2 hoặc mới hơn để biết thêm về điều kiện sao chép.
+Ở đây KHÔNG CÓ BẢO HÀNH GÌ CẢ.
+Kích hoạt bẫy và xử lýThử cài/bỏ cài đặt những thứ ngay cả khi không phải siêu người dùng (root)Đặt tất cả các vấn đề liên quan đến phụ thuộc thành cảnh báoĐặt tất cả các vấn đề liên quan đến phiên bản thành cảnh báoGõ “exit” (thoát) một khi hoàn tất.
+Gõ lệnh “dpkg --help” để xem trợ giúp về cài đặt và gỡ bỏ gói phần mềm [*]
+Dùng “apt” hay “aptitude” để quản lý các gói vì nó thân thiện với người dùng;
+Gõ lệnh:
+ * dpkg -Dhelp        để xem danh sách các giá trị cờ gỡ rối của dpkg;
+ * dpkg --force-help  để xem danh sách các tùy chọn ép buộc;
+ * dpkg-deb --help    để xem trợ giúp về cách dùng với các tập tin kiểu “.deb”;
+
+Tùy chọn có dấu [*] thì xuất nhiều — hãy gửi qua ống dẫn cho “less” hoặc “more”!Gõ:
+dpkg-deb --help		để xem trợ giúp về thao tác tập tin *.deb;
+dpkg --help			để xem trợ giúp về việc cài đặt và gỡ bỏ gói.Gõ “dpkg-split --help” để xem trợ giúp.Gõ “dpkg-trigger --help” để xem trợ giúp về tiện ích này.Đang mở gói %s (%s) …
+Đang mở gói %s (%s) đè lên (%s)…
+Đang cập nhật thông tin gói sẵn sàng, bằng %s.
+Cách dùng: %s [<tùy_chọn> …] <lệnh>
+
+Dùng lệnh trợ giúp “%s --help” biết cách dùng.Nên dùng “apt” hay “aptitude” vì nó thân thiện với người dùng.
+Dùng tùy chọn “--help” để có thông tin trợ giúp về các tập tin hayHãy sử dụng tùy chọn trợ giúp “--help” để tìm trợ giúp về chức năng thống kê gói.Hãy dùng tùy-chọn trợ giúp “--help” để biết cách truy vấn gói.Dùng dpkg với -b, --build, -c, --contents, -e, --control, -I, --info
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+trên các kho (gõ "%s --help" để xem trợ giúp).
+
+Tạm dịch:
+   -b|--build		biên dịch
+   -c|--contents	nội dung
+   -e|--control		điều khiển
+   -I|--info		thông tin
+   -f|--field		trường
+   -x|--extract		giải nén
+   -X|--vextract|	giải nén và liệt kê
+   --fsys-tarfile	tập tin .tar hệ thống tập tin
+
+Dùng tùy chọn mặc định cho các tập tin cấu hình mới nếu có một
+cái sẵn để dùng, đừng hỏi lại. Nếu không tìm thấy cái mặc định nào,
+bạn sẽ được nhắc trừ phi có một tùy chọn cấu hình cũ
+hoặc mới cũng đồng thời được đưa raPhiên bảnChưa cấu hình phiên bản dpkg hỗ trợ %s hoạt động.
+ Hãy dùng câu lệnh cấu hình  “dpkg --configure dpkg”,
+ sau đó thử lại.
+Thêm thì mặc định là “--local” (cục bộ) và “--divert GỐC.distrib”.
+Gỡ bỏ thì phải có “--package” (gói), “--local” (cục bộ) và “--divert” (làm trệch đi)
+tương ứng nhau (nếu có).
+Văn lệnh chạy sau khi cài đặt hoặc gỡ bỏ gói thì cũng phải ghi rõ “--package” và “--divert”.
+Nên gỡ bỏ hoặc tẩy %s (%s) …
+[mặc định=N][mặc định=Y][không có giá trị mặc định]“admindir” phải nằm trong “instdir” để dpkg có thể hoạt động đúng đắncũng cấu hình “%s” (yêu cầu bởi “%s”)gói thay thế %s (phần của nhóm liên kết %s) không tồn tại; vì thế đang gỡ bỏ nó khỏi danh sách các gói thay thếgói thay thế %s không thể là chủ: nó là gói lệ thuộc của %sgói thay thế %s không thể là lệ thuộc của %s: nó là gói thay thế chủ nhângói thay thế %s không thể là lệ thuộc của %s: nó là lệ thuộc của %sgói thay thế %s cho %s không được đăng ký nên không gỡ bỏsự thay thế %s cho %s không được đăng ký nên không đặtliên kết gói thay thế %s đã được %s quản lýliên kết thay thế %s đã được quản lý bởi %s (phần lệ thuộc của %s)liên kết hay thế không phải là tuyệt đối như yêu cầu: %stên gói thay thế (%s) không thể chứa dấu gạch chéo “/” và dấu cách.đường dẫn xen kẽ không phải tuyệt đối như yêu cầu: %stên gói chưa rõ rang “%s” vói nhiều hơn một thực thể được cài đặtcó một sự ghi đè cho “%s”, nhưng mà bị bỏ qua vì “--force” (ép buộc) được đưa ramột sự ghi đè cho “%s” đã xảy ra; nên hủy bỏ%s bị làm trệch nào%s bị làm trệch nào tới %sđộ dài tên tập tin thành viên của ar “%s” quá lớnkích thước thành viên “ar” %jd là quá lớn<rỗng><không><không-hiểu>kiến trúc “%s” là không hợp lệ: %skiến trúc “%s” là để dự trữ và không thể thêm vàokho lưu “%.250s” chứa hai thành viên điều khiển nên chịu thuakho lưu “%.250s” chứa thành viên chết yểu %.*s trước “%s” nên chịu thuakho lưu “%.250s” dùng kiểu nén không hiểu cho thành viên “%.*s” nên chịu thuakho nén chứa đối tượng “%.255s” có kiểu không rõ 0x%xkích thước thành phần kho lưu điều khiểnkho nén có phiên bản không đúng định dạng: %skho lưu có độ dài thành viên điều khiển sai “%s”kho lưu không có dòng mới nào trong phần đầuthành viên phần đầu thông tin kho lưukho lưu có phiên bản định dạng %d.%d; hãy dùng “dpkg-deb” mới hơnsố kỳ diệu của phiên bản kho lưuphần đầu của thành viên kho lưusố phần kho lưuoffset thành phần kho lưusố phần kho lưukích thước kho tổng cộngchế độ tự độngkhả năng tự động cập nhật của %s/%s bị tắt nên không làm gìđang đợi một gói khác xử lý bẫygặp dòng trống trong trường “%.*s”bị hỏng do việc gỡ bỏ hoặc cài đặt bị lỗibị hỏng do chương trình chạy sau khi cài đặt thất bạikhông thể cài đặt sự chọn không rõ %skhông thể mmap (ánh xạ bộ nhớ) tập tin thông tin gói “%.255s”không thể gỡ bỏ văn lệnh postrm (sau khi gỡ bỏ) cũkhông thể lấy các thông tin về tập tin thông tin gói “%.255s”không thể nối thêm tập tin thành viên ar (%s) thành “%s”: %skhông thể nối thêm bộ phận gói chia nhỏ “%s” thành “%s”: %skhông thể nối thêm vào “%s”không thể đóng ống dẫn giải nénkhông thể tính toán mã băm MD5 cho tập tin “%s”: %skhông thể tính toán giá trị băm MD5 cho tập tin kho tar “%.250s”: %skhông thể chuyển đổi chuỗi đa byte “%s” thành ký tự rộngkhông thể chuyển đổi chuỗi đa byte “%s” thành chuỗi ký tự rộngkhông sao chép “%s” vào kho “%s”: %skhông thể sao chép “%s” sang “%s”: %skhông thể sao chép thành viên kho lưu từ “%s” tới đường ống giải nén: %skhông thể chép dữ liệu đã được rút trích cho “%.250s” thành “%.250s”: %skhông thể chuyển hướng các thư mụckhông thể chuyển hướng tập tin “%s” tới chính nókhông thể rút trích tập tin điều khiển “%s” từ “%s”: %skhông thể rút trích phần gói được chia nhỏ “%s”: %skhông thể lấy thẻ điều quản nhãn an ninhkhông thể mở “%.255s” (trong “%.255s”)không thể mở tập tin phần của kho nén “%.250s”không thể mở kênh thông báo trạng thái an ninhkhông thể đọc thư mục tập tin cấu hình “%.250s” (từ “%.250s”)không thể đọc thư mục thông tinkhông thể gỡ bỏ “%.250s”không thể gỡ bỏ kiến trúc “%s” hiện tại đang được dùng bởi cơ sở dữ liệukhông thể gỡ bỏ kiến trúc non-foreign (không ngoại lai) “%s”không thể gỡ bỏ tập tin cấu hình sao lưu cũ “%.250s” (của “%.250s”)không thể gỡ bỏ tập tin cấu hình cũ “%.250s” (= “%.250s”)không thể gỡ bỏ danh sách các tập tin cũkhông thể đổi tên “%s” thành “%s”không thể thỏa mãn các quan hệ phụ thuộc sẵn cho %.250s (cần do %.250s)không thể quét thư mục “%.255s”không thể quét thư mục cập nhật “%.255s”không biết cách thỏa mãn quan hệ phụ thuộc sẵn:
+ %skhông thể đặt ngữ cảnh bảo mật cho đối tượng tập tin “%s”không thể đặt ngữ cảnh thi hành bảo mật cho văn lệnh bảo trìkhông thể bỏ qua thành viên điều khiển kho lưu từ “%s”: %skhông thể bỏ qua thành viên kho lưu từ “%s”: %sđã bỏ qua tập tin “%.255s” (bị thay thế hoặc bị loại trừ?) từ đường ống: %skhông thể bỏ đệm cho tập tin “%.255s”: %skhông thể bỏ qua phần đầu gói chia nhỏ cho “%s”: %skhông thể lấy các thông tin về “%.255s” (trong “%.255s”)không thể lấy thống kê tập tin “%s”không thể sửa đổi các số không chèn thêm có thể được từ dpkg-deb: %skhông cho phép ký tự “%c” (chỉ cho phép chữ cái, chữ số và ký tự “%s”)dữ liệu đã nén bị hỏngthành viên dữ liệu nén tartập tin cấu hình “%.250s” không nằm trong góitập tin cấu hình “%.250s” không có khả năng cung cấp thống kêtập tin cấu hình “%s” không phải là một tập tin tiêu chuẩnCông cụ quan sát sự khác biệt của tập tin cấu hìnhtên tập tin cấu hình “%s” chứa khoảng trắng ở cuốitên tập tin cấu hình “%s” bị trùngtên tập tin cấu hình “%s” quá dài, hoặc nó còn thiếu ký tự dòng mới ở cuốihệ vỏ conffilelỗi cấu hình: %s:%d: %shành động xung đột “-%c (--%s)” và “-%c  (--%s)”diversions (sự trệch đi) xung đột với “%.250s” hay “%.250s”gói xung đột với nhau nên không cài đặt %.250sxem xét đến hủy cấu hình %s, cái mà sẽ bị %s làm hỏng …coi như hủy cấu hình của gói cốt yếu %s,
+ để bật %scoi là gỡ bỏ %s trong sự đồng ý của %s …thư mục điều khiển có quyền hạn sai %03lo (phải ≥0755 và ≤0775)thư mục điều khiển không phải là một thư mụckhông tìm thấy tập tin điều khiển “%s”tập tin điều khiển “%s” cho gói “%s” có chứa tên tập tin rỗngtập tin điều khiển “%s” cho gói “%s” còn thiếu ký tự dòng mới cuối cùngtập tin điều khiển chứa %cthành viên điều khiểnsai hỏng tập tin định dạng thông tin của cơ sở dữ liệu “%s”không thể mở nhật ký “%s”: %skhông thể lấy thống kê về tập tin cũ “%.250s” nên không xóa bỏ nó: %skhông thể mở “%i” cho luồng dữ liệukhông hiểu cái thay thế hiện thời %s nên chuyển đổi sang %s cho nhóm liên kết %sphát hiện chu kỳ tuần hoàn trong khi xử lý bẫy:
+ móc xích của các gói mà sở hữu bẫy có hoặc không thể đáp ứng:thành viên dữ liệucó trục trặc với hệ phụ thuộc - để nguyên bẫy chưa xử lývấn đề quan hệ phụ thuộc - để nguyên chưa được cấu hìnhgặp vấn đề quan hệ phụ thuộc nên không gỡ bỏcó vấn đề quan hệ phụ thuộc ngăn cản việc cấu hình %s:
+%scó trục trặc với quan hệ phụ thuộc ngăn cản việc xử lý bẫy cho %s:
+%svấn đề quan hệ phụ thuộc ngăn cản việc gỡ bỏ %s:
+%sđang hủy liên kết lệ thuộc đã cũ %s (%s).bị trệch bởi %s từ: %s
+bị trệch bởi %s tới: %s
+%s bị %s làm trệch đi%1$s bị %3$s làm trệch tới %2$s“divert-to” (chuyển hướng tới) không thể chứa ký tự dòng mớibị trệch bởi %s tới: %s
+xong
+nâng cấp %.250s từ %.250s thành %.250sTheo dữ liệu hiện thời, dpkg không phải được cài đặt. Trong trường hợp này, không thể kiểm tra có hỗ trợ %s không!
+gói “%.255s” có bẫy đợi bị trùng lặpsự quan tâm bẫy tập tin bị trùng đối với tên tập tin “%.250s” và gói “%.250s”đường dẫn trùng %sbẫy chưa giải quyết bị trùng lặp “%.255s”liên kết lệ thuộc bị trùng %strùng lặp tên “phụ thuộc” (slave) %sgiá trị nhân đôi cho trường “%s”giá trị nhân đôi cho trường do người dùng xác định “%.*s”tên trường trống rỗngchuỗi rỗng từ fgets() đọc các tập tin cấu hìnhkhông cho phép tên bẫy rỗnggặp kết thúc tập tin sau tên trường “%.*s”gặp kết thúc tập tin nằm trước giá trị của trường “%.*s” (còn thiếu dòng mới cuối cùng)gặp kết thúc tập tin trong giá trị của trường “%.*s” (còn thiếu dòng mới cuối cùng)gặp kết thúc tập tin bất thường trên đầu vào tiêu chuẩn tại dấu nhắc tập tin cấu hìnhkỷ nguyên“epoch” trong phiên bản là số âmkỷ nguyên trong phiên bản không phải là con số“epoch” trong phiên bản là quá lớnlỗigặp lỗi khi kiểm tra “%s”gặp lỗi khi đóng %.250slỗi đóng tập tin cấu hình “%.255s”lỗi đóng/ghi “%.255s”lỗi tạo thiết bị “%.255s”lỗi tạo thư mục “%.255s”lỗi tạo liên kết cứng “%.255s”không thể tạo tập tin sao lưu dự phòng mới “%s”lỗi tạo ống dẫn “%.255s”lỗi tạo liên kết mềm “%.255s”gặp lỗi khi bảo đảm “%.250s” không tồn tạigặp lỗi khi thực hiện hàm móc “%s”, mã thoát %dgặp lỗi khi định dạng chuỗi sang biến varbuflỗi trong định dạng “show”: %slỗi cài đặt tập tin mới “%s”gặp lỗi khi mở tập tin cấu hìnhlỗi mở thư mục cấu hình “%s”gặp lỗi khi đang xử lý kho nén %s (--%s):
+ %sgặp lỗi khi đang xử lý gói %s (--%s):
+ %sgặp lỗi khi đọc %.250sgặp lỗi khi đọc %s từ tập tin %.255sgặp lỗi khi đọc tập tin cấu hìnhgặp lỗi khi đọc từ ống dẫn dpkg-debgặp lỗi khi đọc tập tin bẫy trì hoãn “%.250s”không thể gỡ bỏ tập tin sao lưu dự phòng cũ “%s”gặp lỗi khi đặt chủ sở hữu của “%.255s”lỗi đặt quyền sở hữu của liên kết mềm “%.255s”gặp lỗi khi đặt quyền hạn của “%.255s”gặp lỗi khi đặt nhãn thời gian của “%.255s”gặp lỗi khi cố mở %.250sgặp lỗi khi hủy bắt tín hiệu %s: %s
+gặp lỗi khi ghi “%s”lỗi ghi “%s”lỗi ghi vào “%s”gặp lỗi khi ghi vào danh sách kiến trúcgặp lỗi khi ghi ra thiết bị lỗi chuẩn, phát hiện trước khi xem dấu nhắc tập tin cấu hìnhlỗi cấp phát bộ nhớgặp lỗi khi cấp phát bộ nhớ cho mục nhập mới trong danh sách những gói gặp lỗi: %sgặp lỗi khi chuyển đổi thư mục sang “%.255s”gặp lỗi khi chdir (chuyển đổi thư mục) sang thư mụclỗi chroot (chuyển gốc) tới “%.250s”lỗi đóng sau khi đọc: “%.255s”gặp lỗi khi tạo thư mụclỗi tạo ống dẫnlỗi dup (nhân đôi?) cho fd %dlỗi dup (nhân đôi?) cho std%sgặp lỗi khi lấy thống kê về tập tin thành viên ar (%s)lỗi fstat kho lưulỗi fstat tập tin diversions (sự trệch đi)gặp lỗi khi fstat tập tin statoverridegặp lỗi khi tạo tập tin tạm thời (%s)lỗi mở tập tin cấu hình “%.255s” để đọc: %slỗi mở tập tin diversions (sự trệch đi)lỗi mở tập tin thông tin gói “%.255s” để đọcgặp lỗi khi mở tập tin statoverridelỗi mở tập tin danh sách sự quan tâm bẫy “%.250s”gặp lỗi khi đọcgặp lỗi khi đọc “%.255s” (trong “%.255s”)lỗi đọc kho lưu “%.255s”gặp lỗi khi gỡ bỏ tập tin cập nhật đã hợp nhất %.255sgặp lỗi khi gỡ bỏ tập tin cập nhật của mình %.255sgặp lỗi khi tua lại tập tin tạm (%s)lỗi tua lại tập tin danh sách sự quan tâm bẫy “%.250s”gặp lỗi khi di chuyển tới vị trí đầu đọcgặp lỗi khi lấy thống kê về (gỡ bỏ tham chiếu đến) liên kết mềm đã tồn tại “%.250s”gặp lỗi khi lấy thống kê về (gỡ bỏ tham chiếu đến) đích liên kết mềm mới đã đề nghị “%.250s” đối với liên kết mềm “%.250s”gặp lỗi khi lấy thống kê tập tin tạm (%s)gặp lỗi khi bỏ liên kết tập tin tạm (%s), %sgặp lỗi khi ghigặp lỗi khi ghi vào “%.250s” mục ghi cơ sở dữ liệu %s về “%.50s”gặp lỗi khi ghi chi tiết về “%.50s” vào “%.250s”gặp lỗi khi ghi tên tập tin vào đường ống dẫn tar (%s)fgets đưa ra một chuỗi rỗng từ “%.250s”tên trường “%.*s” không thể bắt đầu bằng dấu gạch nốitên trường “%.*s” phải có dấu hai chấm theo sauđộ rộng trường nằm ngoài phạm vi cho phéptập tin “%.250s” có phiên bản định dạng không hợp lệ: %stập tin “%.250s” bị hỏng — %.250s còn thiếutập tin “%.250s” bị hỏng — tổng kiểm tra MD5 %.250s saitập tin “%.250s” bị hỏng — số mầu nhiệm ở phần đầu bị saitập tin “%.250s” bị hỏng — sai số thứ tự phần kho lưutập tin “%.250s” bị hỏng — chữ số sai (mã %d) trong %stập tin “%.250s” bị hỏng — số ma thuật sai ở kết thúc của phần đầu thứ nhấttập tin “%.250s” bị hỏng — số ma thuật sai ở cuối phần đầu thứ haitập tin “%.250s” bị hỏng - số lượng phần không đúngtập tin “%.250s” bị hỏng — ký tự đệm sai (mã %d)tập tin “%.250s” bị hỏng — thiếu ký tự dòng mới đằng sau %.250stập tin “%.250s” bị hỏng — không có dấu gạch ngược giữa các số của phần kho lưutập tin “%.250s” bị hỏng — các số không ở trong phần thông tintập tin “%.250s” bị hỏng — thành viên thứ hai không phải là một thành viên dữ liệutập tin “%.250s” bị hỏng — kích cỡ sai cho số thứ tự phần đã xác địnhtập tin “%.250s” bị hỏng — quá ngắntập tin “%.250s” bị hỏng — sai số các phần cho các kích cỡ đã xác địnhtập tin “%.250s” có định dạng phiên bản “%d.%d”; cần “dpkg-split” mới hơntập tin “%.250s” không phải là một phần kho néntập tin “%s” bị hỏng; số nguyên nằm ngoài phạm vi cho phép trong %stập tin “%s” không phải là một phần kho nén
+không nhận ra định dạng tập tintập tin có vẻ là một kho nén đã bị hỏng
+ do được tải xuống ở chế độ ASCIItập tin không thể chứa ký tự dòng mớimục ghi bẫy tập tin chứa tên gói cấm “%.250s” (đối với sự quan tâm trong tập tin “%.250s”): %.250stên tập tin “%s” không phải dạng tuyệt đốitập tin “%.250s” và “%.250s” không phải là hai phần của cùng một tập tintập tin liệt kê nội dung gói “%.250s” chứa tên tập tin rỗngtập tin liệt kê nội dung gói “%.250s” còn thiếu ký tự dòng mới cuối cùngthiếu tập tin liệt kê nội dung gói “%.250s”, coi gói này không có tập tin hiện thời được cài đặtđang ép buộc cài đặt lại cái thay thế %s vì nhóm liên kết %s bị hỏnggặp lỗi khi tạo tiến trình conphiên bản định dạng theo sau bởi ráckhông có dấu chấm cho tên phiên bảnsố thứ tự phiên bản định dạngđịnh dạng của phiên bản có thành phần số lớn (major) trống rỗngđịnh dạng của phiên bản có thành phần số nhỏ (minor) trống rỗngđã tạo một dòng đầu ar bị hỏng cho “%s”nhóm “%s” không sẵn cóphần đầu quá dài, tạo mỗi phần quá lớn; tên gói hay số của phiên bản
+cần phải dài phi thường, hay một số thứ; chịu thuabỏ qua %d cảnh báo về (các) tập tin điều khiểnđang lờ gói hỏng, vẫn có thể tiếp tục lại!đang lờ trường hợp xung đột, vẫn có thể tiếp tục lại!đang lờ vấn đề quan hệ phụ thuộc về %s:
+%sđang lờ vấn đề về quan hệ phụ thuộc sẵn.đang lờ yêu cầu gỡ bỏ gói mà nó chưa cài đặt %.250sđang lờ yêu cầu gỡ bỏ %.250s,
+ chỉ có những tập tin cấu hình của nó còn lại trên hệ thống.
+ Hãy dùng tùy chọn “--purge” (tẩy) nếu bạn muốn gỡ bỏ chúng đi.tên kiến trúc không hợp lệ trong định danh “%s:%s”: %stên gói đã đợi không hợp lệ “%.250s”: %.250sgặp tên gói không hợp lệ trên dòng %d: %.250sgặp tên gói không hợp lệ trong bẫy mong muốn “%.255s”: %stên gói không hợp lệ trong định danh “%s%s%s”: %stên bẫy chưa giải quyết không hợp lệ “%.255s”: %sđịnh dạng cơ sở dữ liệu thông tin (%d) là giả hoặc quá mới; hãy thử dpkg bản mới hơntập tin thông tin %s/%s không liên quan đến bất kỳ gói nàoviệc cài đặt %.250sđã cài đặtcài đặt %.250s có thể làm hỏng %.250s, cũng không cho phép
+hủy cấu hình (“--auto-deconfigure” [tự động hủy cấu hình] sẽ giúp)cài đặt %.250s có thể làm hỏng phần mềm đã cólỗi nội bộ (đây là lỗi)ký tự không hợp lệ “%c” trong kho lưu “%.250s” kích thước thành viên “%.16s”ký tự “%c” trong độ rộng trường không hợp lệgặp ký tự sai trong số thứ tự bản sửa đổigặp ký tự sai trong số thứ tự phiên bảnmức nén không hợp lệ cho -%c: %ldcác tham số nén không hợp lệ: %sphiên bản định dạng deb không hợp lệ: %ssố nguyên không hợp lệ cho -%c: “%.250s”số nguyên không hợp lệ cho “--%s”: “%.250s”gặp cú pháp không hợp lệ hoặc không rõ trong tên bẫy “%.250s” (trong sự quan tâm bẫy đối với gói “%.250s”tên gói không hợp lệ “%.250s” trong tập tin bẫy bị hoãn lại “%.250s”mã số nhóm statoverride không hợp lệ %schế độ “statoverride” không hợp lệ %smã số người dùng statoverride không hợp lệ %strạng thái không hợp lệtên bẫy không hợp lệ “%.250s”: %.250sgặp dòng không có chấm dứt trong khi thử đọc %sgặp dòng quá dài hoặc dòng không có chấm dứt, trong khi thử đọc %sliên kết %s là cả hai kiểu chính và phụtrệch nội bộ từ: %s
+%s bị làm trệch nội bộ%s bị làm trệch nội bộ tới %sbị trệch nội bộ tới: %s
+bị trệch nội bộ tới: %s
+tên tập tin dàivăn lệnh bảo trì “%.50s” được phân quyền sai %03lo (phải ≥0755 và ≤0775)văn lệnh dùng để bảo trì “%.50s” không phải là tập tin thường hay liên kết mềmvăn lệnh bảo trì “%.50s” không có khả năng cung cấp các thông tinmalloc bị lỗi (%zu bytes)chế độ bằng taytập tin chủliên kết chủcó thể gặp khó khăn trong việc gỡ bỏ %s, vì nó cung cấp %s …có lẽ không phải là chuỗi rỗngđã đạt đến giới hạn sử dụng bộ nhớkhông khớp trên “divert-to”
+  khi gỡ bỏ “%s”
+  tìm thấy “%s”không khớp trên “gói”
+  khi gỡ bỏ “%s”
+  tìm thấy “%s”thiếu dấu ngoặc ômcó sự pha trộn các gói “non-coinstallable” và “coinstallable” hiện diện; gần như chắc chắn có căn nguyên do cập nhật từ kho dpkg không chính thứcđa-kiến-trúccó nhiều trường hợp Xung đột và Thay thếcó nhiều minh dụ gói “non-coinstallable” hiện diện; nguyên nhân gần như chắc chắn là do cập nhật từ kho dpkg không chính thứccó nhiều statoverride (sự ghi đè lên trạng thái) cho tập tin “%.250s”phải được gọi từ văn lệnh bảo trì (hoặc với một tùy chọn --by-package)phải bắt đầu bằng một chữ trong bảng chữ cáiphải bắt đầu bằng một ký tự kiểu sốtên %s là cả hai kiểu chính và phụcần một tùy chọn hành độngdòng mới trong tên trường “%.*s”không cho phép ký hiệu dòng mới trong đối tượng kho tên “%.250s”không cho phép ký hiệu dòng mới trong tên đường dẫn “%s”không cho phép ký tự dòng mới trong tập tin “update-alternatives” (%s)không có thay thế cho %skhông có ghi đè hiện diệnkhông có thông tin gói trong “%.255s”không có gói tên “%s” được cài đặt nên không thể cấu hìnhkhông tìm thấy gói nào khớp với %skhông có đường dẫn nào khớp với mẫu “%s”không, %s là cốt yếu, sẽ không bỏ
+ cấu hình nó cốt để bật %skhông, không thể xử lý %s (“--auto-deconfigure” [tự động bỏ cấu hình] sẽ có ích):
+%skhông kiểm tra nội dung của vùng điều khiểnchưa cài đặtkhông được cài đặt nhưng vẫn còn có các cấu hìnhkhông xóa bỏ %s vì nó không phải là một liên kết mềmkhông thay thế %s bằng một liên kếtkhông có gì nằm sau dấu hai chấm trong số thứ tự phiên bảngặp tên gói vô giá trị “--%s” trong danh sách định giới bằng dấu phẩy “%.250s”số phần của kho lưugặp tùy chọn “--%s” quá cũ; các gói không sẵn sàng được tự động làm sạchtùy chọn ép buộc hoặc từ chối đã lạc hậu “%s”tùy chọn “--%s” đã lạc hậutập tin cấu hình cũ “%.250s” là một thư mục trống (thì đã được xóa bỏ)tập tin cũ “%.250s” là cùng một tập tin với vài tập tin mới (cả hai “%.250s” và “%.250s”)phiên bản cũ của gói có tên tập tin thông tin quá dài bắt đầu “%.250s”chỉ dùng được phiên bản chính xác cho trường “%s”việc mở thành phần “%.255s” (trong %.255s) bị lỗi một cách bất thườngkhông đủ bộ nhớ cho mục dọn dẹp mớikhông đủ bộ nhớ cho mục dọn dẹp mới có nhiều đối sốkhông đủ bộ nhớ cho ngữ cảnh lỗi mớicó quyền cao hơn vấn đề này vì tùy chọn “--force” (ép buộc) đã được hiệu lực: gói %.250s đã được cài đặt và cấu hìnhgói %.250s chưa sẵn sàng để cấu hình
+ nên không thể cấu hình (trạng thái hiện thời “%.250s”)gói %.250s chưa sẵn sàng để xử lý bẫy
+ (trạng thái hiện thời “%.250s”, không có bẫy chưa xử lý)gói %s %s không thể được cấu hình bởi vì %s có phiên bản khác (%s)gói “%s” chưa được cấu hình bởi vì “%s” chưa sẵn sàng (trạng thái hiện thời “%s”)gói %s chứa một danh sách dưới dạng tập tin thông tingói %s yêu cầu cài đặt lại, nhưng sẽ vẫn gỡ bỏ nó theo yêu cầu của bạngói %s yêu cầu cài đặt lại, sẽ không được gỡ bỏgói %s bị giữ lại, vẫn xử lý nó như bạn yêu cầugói “%s” không sẵn sàngchưa cài đặt gói “%s”Gói “%s” không được cài đặt và không có thông tin nào cảkiến trúc của góikiến trúc gói (%s) không khớp với hệ thống (%s)gói chứa tên tập tin thông tin điều khiển quá dài (bắt đầu “%.50s”)thông tin điều khiển gói chứa thư mục “%.250s”việc rmdir (gỡ bỏ thư mục) kiểu thông tin điều khiển gói của “%.250s” không nói “không phải là thư mục”rút trích thông tin điều khiển góigói làm trệch những gói khác tới: %s
+rút trích giá trị trường của góitổng kiểm tra MD5 tập tin góisự rút trích hệ thống tập tin kho lưu của góigói có trạng thái %s nhưng đang cần các bẫygói có trạng thái %s nhưng có bẫy chưa xử lýGói ở trong tình trạng rất mâu thuẫn; bạn nên
+ cài đặt lại nó trước khi thử gỡ bỏ nó.gói ở trong trạng thái mâu thuẫn rất tệ; bạn nên cài đặt
+ lại trước khi thử cấu hình.“package” (gói) không thể chứa ký tự dòng mớitên góitên gói chứa ký tự không phải ký tự chữ số viết thường hoặc dấu cộng, dấu trừ “-+”.thẩm tra chữ ký của góisố thứ tự phiên bản góiphần %d còn thiếutập tin phần “%.250s” không phải là tập tin thườngkích cỡ phần quá dài hoặc không phải là số dươngkích cỡ phần phải là ít nhất %d KiB (để chứa phần đầu)đã qua
+dánđường dẫn không thể chứa ký tự dòng mớicó vấn đề quan hệ phụ thuộc sẵn nên không cài đặt %.250sưu tiênmức ưu tiên vượt ra ngoài phạm vi“ưu tiên” phải là một số nguyênmức ưu tiên của %s vượt ra ngoài phạm vi: %smức ưu tiên của %s: %sgặp lỗi đọc trong %.250slỗi đọc trong “%.250s”lỗi đọc trong tập tin cấu hình “%.255s”lỗi đọc trên thiết bị nhập chuẩnlỗi đọc trên thiết bị nhập chuẩn ở dấu nhắc tập tin cấu hìnhđọc tập tin thông tin gói “%.255s”đang đọc tập tin thông tin gói “%s”: %sđang đọc tập tin “statoverride” “%.250s”tập tin gói đã được lắp ráp lạivề %s chứa %s, vấn đề quan hệ phụ thuộc sẵn:
+%sliên quan đến %s chứa %s:
+%sviệc gỡ bỏ %.250sgỡ bỏ kiến trúc “%s” hiện nay đang được dùng bởi cơ sở dữ liệuđang gỡ bỏ sự xen kẽ được chọn bằng tay — đang chuyển đổi %s sang chế độ tự động“rename” tham gia vào việc ghi đè “%s”
+  bằng tập tin khác “%s”, không cho phép như vậyrename: gỡ bỏ liên kết cũ bị trùng “%s”thao tác đã yêu cầu cần quyền của siêu người dùng (superuser)chạy lệnh “rm” để dọn dẹpđã tìm kiếm, nhưng không tìm thấy gói nào (tập tin khớp với *.deb)<không-hiểu>đang cài đặt chọn lựa tự động của %stìm thấy vài mục nhập thông tin gói, chỉ cho phép một mụclệnh hệ vỏ dùng để di chuyển các tập tinbỏ qua bước tạo %s bởi vì tập tin liên quan %s (của nhóm liên kết %s) không tồn tạitập tin phụ thuộcliên kết lệ thuộcliên kết lệ thuộc vẫn trùng với liên kết chính %stên phụ thuộctập tin nguồn “%.250s” không phải là tập tin thườngChia gói ra thành nhiều phầntập tin statoverride chứa dòng trốngtập tin statoverride còn thiếu ký tự dòng mới cuối cùngtrạng tháibộ ghi nhật ký trạng tháiđang xóa bỏ các dấu gạch chéo / ở cuốitiến trình con %s trả lại lỗi, trạng thái thoát %dkích thước liên kết mềm “%.250s” được thay đổi từ %jd thành %zdlỗi cú pháp trong tập tin bẫy tập tin “%.250s”gặp lỗi cú pháp trong tập tin stateoverridechấp nhận một đối số, tên bẫyđích là thư mục — không thể bỏ qua việc kiểm tra tập tin điều khiểncó vài phiên bản khác nhau của phần %d — ít nhất là “%.250s” và “%.250s”không có văn lệnh trong phiên bản mới của gói nên chịu thuađây là một gói cơ bản; nên không thể gỡ bỏ nóđể quay lại lại tính năng tự động cập nhật, hãy dùng lệnh “%s --auto %s”quá nhiều lỗi nghiêm trọng nên phải dừngdòng quá dài hoặc dòng mới bị thiếu trong “%.250s”gặp lỗi cú pháp trong tập tin sự quan tâm bẫy “%.250s”; tên gói không hợp lệ “%.250s”: %.250stên bẫy chứa ký tự không hợp lệbản ghi của bẫy chưa tồn tạiđã sập bẫytập tin ci bẫy “%.250s” chứa cú pháp bẫy cấm trong tên bẫy “%.250s”: %.250stập tin bẫy ci chứa chỉ thị không rõ “%.250s”tập tin bẫy ci chứa cú pháp chỉ thị không rõchưa tạo thư mục dữ liệu cho các bẫybẫy quẩn tròn nên bị hủyđang thử văn lệnh từ gói mới để thay thế …đang cố ghi đè lên “%.250s”, cái mà cũng nằm trong gói %.250s %.250sđang thử ghi đè lên “%.250s”, phiên bản đã chuyển hướng của “%.250s”đang thử ghi đè lên “%.250s”, cái mà làm trệch hướng phiên bản của “%.250s” (gói: %.100s)đang cố ghi đè lên thư mục “%.250s” trong gói %.250s %.250s với điều khác thư mụcđang cố ghi đè lên phần chung “%.250s”, cái mà cũng khác với trường hợp cụ thể của gói %.250sđã chỉ định hai lệnh: --%s và --%skhông thể mở (lại) phần tập tin đầu vào “%.250s”không thể thay đổi quyền sở hữu tập tin đích “%.250s”không thể kiểm tra sự tồn tại của “%.250s”không thể kiểm tra trạng thái khóa của tập tin “%s”không thể kiểm tra sự tồn tại của kho lưu “%.250s”không thể chown (chuyển đổi chủ sở hữu) liên kết mềm sao lưu cho “%.255s”không thể dọn dẹp sự lộn xộn quanh “%.255s” trước khi cài đặt phiên bản kháckhông thể đóng tập tin “%s”không thể đóng tập tin mới “%.250s”không thể mở tập tin bẫy trì hoãn mới “%.250s”không thể đóng trạng thái đã cập nhật của “%.250s”không thể tạo “%.255s”không tạo được “%.255s” (trong khi xử lý “%.255s”)không thể tạo tập tin “%s”không thể tạo tập tin mới “%.250s”không thể tạo thư mục tạm thờikhông thể tạo thư mục tình trạng bẫy “%.250s”không thể xóa tập tin thông tin điều khiển “%.250s”không thể xóa bỏ thư mục cũ “%.250s”: %skhông thể xóa tập tin kho chứa (depot) tiêu thụ “%.250s”không thể hủy “%.250s”không thể thực hiện %s (%s)không thể điền đầy %.250s bằng các ký tự đệm lótkhông thể xóa sạch %.250s sau khi đệm lótkhông thể đẩy dữ liệu của tập tin “%s” lên đĩakhông thể đẩy dữ liệu từ bộ nhớ lên đĩa tập tin mới “%.250s”không thể đưa trạng thái đã cập nhật của “%.250s” lên đĩa cứngkhông thể lấy thống kê (fstat) tập tin nguồnkhông thể fsync (đồng bộ tập tin) trạng thái đã cập nhật của “%.250s”không thể lấy filedescriptor (mô tả tập tin) cho thư mục “%s”không thể bỏ qua tín hiệu %s trước khi chạy %.250skhông thể cài đặt “%.250s” như là “%.250s”không thể cài đặt tập tin thông tin (giả thiết) mới “%.250s”không thể cài đặt tập tin thông tin mới “%.250s” dưới dạng “%.250s”không thể cài đặt tập tin bẫy trì hoãn mới “%.250s”không thể cài đặt phiên bản mới của “%.255s”không thể cài đặt trạng thái đã cập nhật của “%.250s”không thể khóa %skhông thể tạo liên kết mềm sao lưu của “%.255s” trước khi cài đặt phiên bản mớikhông thể tạo liên kết mềm sao lưu cho “%.255s”không thể di chuyển “%.255s” riêng ra để cài đặt phiên bản mớikhông thể mở “%.255s”không thể mở thư mục “%s”không thể mở tập tin “%s”không thể mở tập tin kho chứa (depot) mới “%.250s”không thể mở tập tin kết xuất “%.250s”không thể mở tập tin nguồn “%.250s”không thể mở thư mục điều khiển tạm thờikhông thể mở tập tin bẫy ci “%.250s”không thể mở tập tin bẫy trì hoãn “%.250s”không thể mở/tạo tập tin bẫy trì hoãn mới “%.250s”không thể đọc thư mục kho chứa (depot) “%.250s”không thể đọc tập tin bẫy tập tin “%.250s”không thể đọc các cờ filedescriptor (mô tả tập tin) cho %.250skhông thể đọc liên kết “%.255s”không thể đọc tập tin phần “%.250s”không thể gỡ bỏ “%s”không thể gỡ bỏ bản sao lưu của “%.250s”không gỡ bỏ tập tin nguồn đã sao chép “%s”không thể gỡ bỏ phiên bản mới giải phóng của “%.250s”không thể gỡ bỏ phiên bản mới cài đặt của “%.250s”không thể gỡ bỏ phiên bản mới cài đặt của “%.250s” để cho phép cài đặt lại bản sao lưukhông thể gỡ bỏ tập tin thông tin cũ “%.250s”không thể đổi tên tập tin kho chứa (depot) mới “%.250s” thành “%.250s”không thể mở lại tập tin phần “%.250s”không thể phục hồi phiên bản sao lưu của “%.250s”không thể gỡ bỏ bảo mật “%.250s”không thể gỡ bỏ “%.255s” một cách an toànkhông thể gỡ bỏ tập tin cũ “%.250s” một cách an toàn: %skhông thể tìm vị trí tới đầu của %.250s sau khi đệm lótkhông thể đặt việc chuyển hoán đệm trên tập tin cơ sở dữ liệu %skhông thể đặt cờ close-on-exec (đóng khi thực hiện) cho %.250skhông thể đặt quyền thực hiện cho “%.250s”không thể đặt chế độ của tập tin đích “%.250s”không thể setenv (đặt môi trường) cho văn lệnh bảo trìkhông thể chạy “setenv” cho tiến trình conkhông thể lấy thống kê %s “%.250s”không thể lấy thống kê về %s “%.250s”: %skhông thể lấy các thông tin về “%.250s”không thể lấy thống kê về thư mục điều khiểnkhông thể lấy thống kê vê tập tin cấu hình hiện thời được cài đặt “%.250s”không thể lấy thống kê tập tin cấu hình mới phát hành “%.250s”không thể lấy các thông tin về tập tin mới khác “%.250s”không thể lấy thống kê về “%.255s” đã phục hồi trước khi cài đặt phiên bản kháckhông thể lấy thống kê về tập tin nguồn “%.250s”không thể lấy thống kê về tập tin bẫy trì hoãn “%.250s”không thể “sync” (đồng bộ) thư mục “%s”không thể động bộ hóa tập tin “%.255s”không thể đồng bộ hóa tập tin “%s”không thể đồng bộ hóa tập tin mới “%.250s”không thể cắt ngắn cho trạng thái đã cập nhật của “%.250s”không thể khóa “%s”không thể ghi tập tin “%s”không thể ghi tập tin mới “%.250s”không thể mở tập tin bẫy trì hoãn mới “%.250s”không thể ghi vào bộ mô tả tập tin (fd) kiểu trạng thái %dkhông thể ghi trạng thái đã cập nhật của “%.250s”dấu trích dẫn không thành cặp trong “%s”gặp lỗi bzip2 bất thườnggặp dữ liệu bất thường sau gói và vùng chọn trên dòng %dgặp kết thúc dòng bất thường sau tên gói tại dòng %dgặp kết thúc tập tin bất thường tại cuỗi dòng %dgặp kết thúc tập tin bất thường trong %s trong %.255sgặp kết thúc dòng bất thường trong tên gói tại dòng %dgặp kết thúc bất ngờ của tập tin hay dòng dữ liệugặp kết thúc tập tin bất thường khi đọc "%.250s"gặp kết thúc tập tin bất thường trong khi thử đọc %skết thúc của đầu vào bất thườnggặp kết thúc dòng bất thường sau tên gói trên dòng %dgặp kết thúc dòng bất thường trong tên gói trên dòng %dgặp kết thúc dòng bất thường trong tập tin stateoverridekhông rõ đối số “%s”không hiểu chiến lược nénkhông hiểu chiến lược nén “%s”!không hiểu kiểu nén “%s”!không hiểu phiên bản định dạng deb: “%s”không rõ tùy chọn ép buộc hoặc từ chối “%.*s”không rõ tùy chọn “%s”không hiểu tùy chọn “-%c”không hiểu tùy chọn “--%s”không hiểu định dạng kết xuất cho việc thẩm định “%s”trạng thái mong muốn không rõ trên dòng %d: %.250sđã mở gói nhưng chưa cấu hìnhkhông hỗ trợ phương thức nén cho trướckhông hỗ trợ kiểu nén “%s” với nén không đổicác tùy chọn không được hỗ trợ trong phần đầu tập tinkiểu của kiểm tra mức ưu tiên không được hỗ trợthư mục cập nhật chứa tập tin “%.250s” có tên quá dài (độ dài=%d, tối đa=%d)thư mục cập nhật chứa các tập tin có tên có chiều dài khác nhau (cả hai %d và %d)đang cập nhật lại cái thay thế %s vì nhóm liên kết %s đã thay đổi các liên kết lệ thuộckhông có tài khoản “%s”tên trường do người dùng xác định “%.*s” quá ngắndùng %s để cung cấp %s (%s) trong chế độ tự độngdùng %s để cung cấp %s (%s) trong chế độ thủ cônggiá trị cho trường “%s” có dòng sai định dạng “%.*s”không cho phép giá trị cho trường “%s” trong ngữ cảnh nàyxác minh trên gói “%s” gặp lỗi!thẩm tra gói %s gặp lỗi; nhưng vẫn đang cài đặt như bạn yêu cầu<không>phiên bản %.250s của %.250s đã được cài đặt nên bỏ quaphiên bản “%s” có cú pháp saisố của phiên bản không bắt đầu bằng con sốchuỗi phiên bản có khoảng trắng nhúngchuỗi phiên bản là rỗngĐã cung cấp phiên bảngặp lỗi chờ tiến trình con %scảnh báotrong khi đọc %s: %strong khi gỡ bỏ %.250s, thư mục “%.250s” không trống nên không được gỡ bỏtrong khi gỡ bỏ %.250s, không thể gỡ bỏ thư mục “%.250s”:
+%s — thư mục có thể là một điểm gắn không?sẽ không hạ cấp %.250s từ phiên bản %.250s xuống %.250s nên bỏ quacó, sẽ hủy cấu hình %s (bị %s làm hỏng)yes, sẽ gỡ bỏ %s trong sự đồng ý của %sbạn phải ghi rõ mỗi gói bằng tên riêng của nó, không phải bằng tên của tập tin .deb chứa nó
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/zh_CN.gmo dpkg-1.20.7.1/po/zh_CN.gmo
--- dpkg-1.20.7.1-orig/po/zh_CN.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/zh_CN.gmo	2021-06-09 18:25:16.153505259 -0500
@@ -0,0 +1,900 @@
+��fL#�|F^?^aY^ �^k�^�H_�`&�`=�`&�`a-1b._b�b.�b�b �b4c@c5\c-�c.�c0�c1 d$Rd4wd/�d�dq�d(fe$�e�e�e:�e6/f1ff1�f!�f2�f(gHgXg!rg�g�g�g�g.�ghS%hyh�h�h9�hm�h)ii:�i9�i.j'7j&_j�j3�j5�jkkPk\jkv�k[>lU�l�lmm#m8mZGm�m�m��m�n=�n�n�n-o+9oeo)�o�o#�o/�op�%p=rR?r1�rD�rL	sAVs'�s&�s(�s't+8t4dt!�t,�t9�t-"uPu#nu�u$�u�u �u"v7v!Uv#wv�v�v�v�v�v"w2/w1bw/�w'�w�w.x2x<Mx�x-�xR�xH%yQnyA�yezfhzI�z/{HI{7�{<�{7|?|(R|B{|�|�|�|
} }2}5K}1�}@�}0�}%~7~#P~!t~�~�~K�~75T-��!��'�-6�-d� ��5��� 	�*�"B�!e�"��!��$́,�.�.M�.|���H˂6�(K�>t�$�� ؃����+��C����#�:4�-o�������ц*ކ<	�#F�-j�-���Ƈ[�h�5����[����\��_�g�
������(-��85�<n�.��ڝ0�3"�1V����������0q�1��*ԟJ��2J��}�&"�/I�2y�E��V�I�5b�.��7ǣ-��+-�/Y�
��%��/��*��&�!?�+a�B��]Х.�!3��U�M�>�2T�����3�G˪!�"5�X�4w�.��2۲5�3D�x�G��8г,	�6�(U�~�����G����3�)6�$`�:��,��V�� D�e�*����¶&Ѷ3��-,�+Z�?��,Ʒ	����*+�V�l� ��H�������˹g~�j��Q��,�4��5/��e��-����u��&�AA�{��!��,!�*N�.y�������K� ��5��&� =�,^�$��.��>��*�;I�,��#��L��>#��b�����;��+�u3����"��������9��(�X-�3��?��8��23�1f�,��:��4�55�4k�,��A��1�MA�-������#���,�A�U� l�1��%��8��?�"^�B��6����5�&M�.t�!��!��5���:�P�e�y���	��9��.��#�8�,X���$������%�.�%M�s�-��1�����)#�1M�:�?��&��!�=>�7|�+��#���,�+L�x�!��.��*��7�#F�j�"y�&������0��#�:2�m���@��+��;�3H�|���A����&�-<�#j�0��;��0��(,�?U�)��-����"���5�#O�4s�E����	�, �"M�!p���$��5�� �.-�8\�����-��5��,'�BT�B��+��G�$N� s�:��;��3�=?�}���&��/����7�P�Dn�c���2#�*V�"��3��:��-�(A�&j���������"���W/���(������=��*�JE���"��������-� B�c�)t�%����#��@�@D�'����������	�%�+�?�)T�~���!��!��#�$�%A�%g�'��,�������*7�'b�'����!���� �-'�#U�#y�+��%��$��� 0�Q�i�����"��:��	�F#�j�����$������.�#F�j���!��"��:��"�5A� w�2����%���0 �*Q�$|�/����6��V�"n�(����<��.�)6�(`�*��+����,��))�4S�3��2��4��;$�<`�6��:��7�@G�0��;��?��$5�AZ�=��>��$�0>�!o���b���c-���:��<��='�_e�#��H��2�>�^�x�)��)��+��+��:�$���4�N��`�\��&A�&h�'�� ��7��t�2��-��'��4.C)rG�-�	)3kR/���>%Q$w#�&�!�	!("J^m@�&
4Pm��!���0(M%v�+�7�!*5(`�����O8e*�����3;S7n5���|	
+�	�	m�	0
+GL
+�
+)�
+!�
+/3L$�5�%�",4O�!�C�=
%F
ol

�
 �
(4%Q7w��I�.*6Y!���G�P*G{.�?�#27V#��+�2�Y1f�L�h?M�&�K3i=���=U4j(�F�1;A&}���%�/"2R8�-�-�..Iaxe� @a nD�?�3J%].��&�-�7RltzT�.�%>"Z}2���)�&6"]"�"��6�57GBH�&02<cO��	 :  6[ %� � $� 4� $!@!O^!
+�!
+�!�!
+�!%�!"%."*T""
�"�"+�"7�"+
#!9#M[#$�#4�#F$@J$%�$6�$1�$A%\%,v%B�%,�%#&R7& �&'�&$�&	�&Z'4]'2�''�'�'(. (DO(G�(Y�(Q6)^�)%�)+
*G9*/�*2�*%�*%
++10+8b++�+N�+,!0,3R,*�,�,5�,-"-$?-2d-+�-+�-,�-.7."Q.$t.�.!�.*�./*/0G/0x/&�/3�/40590)o0,�0�0D�0*14H1}1�1�1&�1#�1#2%;2(a2.�2>�29�29231l3"�3'�3*�3.4C4!`4�4(�4(�44�445[T5,�54�5#6,66"c6"�6/�6/�6+	7+57-a7*�7&�7!�788=89U8 �82�80�8&9B;9#~9.�9�9�9: %:1F:x:�:!�:3�:�:*;G;a;6x;4�;,�;&<18< j<'�<.�<�<4�<1/=+a=#�=�=�="�=>&>"E>h>|>�>��>�e?%@!B@(d@�@#�@$�@$�@(A@A:_A"�A#�AS�AM5BE�B�B(�B(C*4C:_C.�C0�C"�CIDgD4vD�D�D(�DE"(EKEcEvE�E�E�EB�E`F9sF�F'�F#�FAG`RG��G-RIQ�I�If�I�VJ{-K!�K?�K,L"8L1[M,�M�M5�MNN8;NtN(�N2�N6�N3!O/UO2�OD�O8�O6PvKP.�P�PQ-QBCQ7�Q-�Q6�Q #R4DR(yR�R�R�R�RSS8S.ISxS,�S�S�S�SDT�PT9�TD*UEoU9�U6�U3&VZV/pV;�V�V�Vd�VySWB�W3X'DXlX�X�X�X�Xm�X3YCY�PY:Z@PZ�Z�Z3�Z!�Z[%[C[!P[0r[�[7�[L�]a=^H�^e�^GN_A�_*�_)`*-`)X`,�`,�`�`3�`3/a,ca�a#�a�a#�ab"4b"Wbzb"�b"�b�b�b
+c!c8c,Sc1�c9�c)�c'd>d<Rd�d<�d�d,�dJ,eCweT�e=fXNf`�fAg*JgAug3�g<�g6(h_h=}hC�h�hi'i<iOiii3�iA�iA�i5>jtj�j5�j!�j�jkT7k>�k2�k/�k.lFlal#l2�l8�lm=-m km �m�m)�m(�m)n"En)hn4�n+�nI�n2=o(po`�o9�o,4pYap"�p'�pq#q
*q8q�Mq�q�q"	r=,r)js�s�s�s�s$�s5�s!-t*Ot*zt|�t"u/u/Dutub�vF�vK	;{ �����C_�D���#��*�J�6g�6��.Ռ�0�*M�1x�����ύ֍)�-�:�\Z�<�����-�)6�D`�/��!Ւ9��31�?e�)��!ϓ.� �1�2G�!z�$����'��B�]K���+���ܕ[��ޖ3�{"����v,�����ѡ0�<!�'^�9��9����|�:��&ѣ%��<�[�b�r�G��	ФHڤ*#�,N�:{�)��)�+
+�$6�[�z���0��:֦2�1D�Hv�(�����'%�M�b�(~�/��ר�ި���Y^�_������%ά(���������4+�`�5y����V�3l�!��'°0������7z�A����(�27�%j�5��@ƴ2�8:�5s�,��NֵF%��l��H��<��:�qA�&��(ڹ��%�@7�(x�Q��5�;)�?e�5��2ۻ)�=8�>v�(��>޼&�CD�-��B��)��#�7�U�q���������3��"�5�GI���@��E�7�1S� ��%��'����0
+�;�T�d�z�������3��'��!�#A�3e�:��'��*��'�,F�#s�2����,��0�@�S�*l�3��6��6�%9�_�9{�:�����.�$D�!i���"��0��(��@�_�~�'��(������$
�2�9B�|���=��$��E�5R�!����9���� �1:�l�0��3��0��'!�EI�0��/����0��0�P�"p�B��H���5�)M� w�������,���-4�Fb�����-��I�+J�5v�<��&��@�Q�l�:��=��1�:3�n���!��/��!��@	�J�>`�e���'�$:�!_�=��@��.�-/�#]�������'��'���c2���,������Q�� >�@_��� �������0#�T�s�8��������@�FE�5�����������6�=�Q�#f���#���� ��!	�+�#I�)m�+��/�����*�J�&j�)���� �����&4�$[� ��,��#��#���"1�T�d�~���!��1����\�c�{������������ $�"E�h� ����1����8� D�+e���'����,��,�+;�2g�!��=��W��"R�"u���C��-��)�,A�)n�!����(��0��8-�/f�5��A��N�G]�5��C��@�J`�C��>��>.�)m�A��\��K6�2��/��0����/���f��!@�Cb�5��>��t�&��>�����!�:�$G�$l�$��$�����"����������+k�9��9��%�1�>J�{��4�*:�1e�=��5��(�Q4�-��
��	�� ��a��#O�s���A��$�����,�L�g�"��'��]��?0�.p�$��)��'���#�"=�`� �����)��$	�.�>�+^�"��4��(���!�6�M�c�y�I��:��4�@�[�	h�	r�8|�����;��5#�Y�l�����c*�.��C��� �%?�!e���!��2��%��- �9N�����,��F��(#�%L�Jr�F���a#�	��6��.����*�>@����E��+��2"#Uy�>�A�e3&�<�'�0%*V$�9�+�LdYP�fOv4�R�7Nd��<%b>x$�^�1;Gm�'��!36U0�I�7	C?	1�	=�	[�	aO
+!�
+�
+�
+:�
+X6���/�=E,\6�@�


*
1
TP
$�
	�
�
�
63j#�$�4�**=#h!�;�"�

=@Y>�'�*5,Qb��B�T!'v��<�$ FE	��"��&��+3_f|"�1�)�%
S3$�<�P�3:(nB�1�6!C6e8�5�+O7���	�^�,F+s!���0�E!9gM�`�OP%�6�E�$C,h �#�)�328>k��+� ,'@h~�(�%�((+Th}��� �   *@ 0k !� C� 3!+6! b! �!�!G�!,�!/)"Y"m"�"%�"�"�"$#&&#%M#3s#3�#2�#0$?$.^$%�$0�$�$%$%#4%!X%,z%,�%>�%.&6B&y&#�&�&�&.�&,$'+Q'/}'"�'&�''�'$(!D(&f(�(=�(!�(8)+D),p)D�)&�)/	*9*Q*k*�* �*�*�*�*++$.+ S+t+�+X�+=�+=;,Cy,=�,$�,2 -1S-�-R�-:�-.,.[.z.�."�."�.�.)/:/J/[/�m/�)0�011+1]1$y1&�1&�1,�12'22Z2!v2X�2F�2>83w3!�33�33�384+P4!|4"�4F�45=5L5h5�5�5�5�5�5�56!6(6F>6]�6A�6%7+B7#n73�7l�7#�)�|Lma�}�31��lX 4/j1�<B����s%���'H5C,�n|���{�����YH���E)�������1	���oI	S��ilf{�9/JR��*�yo���Z����[J��K�9�������U�"�B�S}��w���+�*�����ia#����B����00&v!Dl��2�����P"�2[�5T/3]IWLR���>�@"�<awu0���\�~��f-�<��^����NW"�&��h��N���(k��F�����X8�a�M�Zs��
+�iu�.���L+ex�)0�CMT� ����y�q�s�.��JfVw8O�~��=�W��/�4�����)��&���'N�E��
eA��Q��F�|ys�	���(�g��;��\�<������Lt*�ke=�����9��'�@g�T���
+�+I��)�8���u��;�AC]f���c&-�gq������*�V�~I��MQ�d��l$���Wk���_��Xp�!��tXY��`�_�-T�"��P��G���~%�����gk�J����7����x���46]7�]�
+3m�������^y(vc��C^���������r��:�}���?K��8���mA�L?I�f\����!��#��0
��=��DqrA��5�;����G��z�n�Z�z�Pv@.�Rq���$\#H!O_�^���.�����Ym�_G����H�
]O�
�:;���JMB��p-n>������VRQ�Ei�r�U��@W,���F6>�%��S���<�{$��,��������`A��Ej n�'�h��VYc�Q���K��dG�xj4�����/�!	�5��z bS�����a�9Nevx5�h���2�
��O2P�47�G�rC�}d7c?c?�������[E3�(�7p�Z�tw�$�H�	�pVRD�� �`{.�3
+��2�*��o1�P�������6���-��&+KX�,��`>�uU%\'�8
+�O��>t�b�j9,?�|�b�F��U�1d[��e#����F��h=:Y�U6�D�KBdD�_�Zz�$����+b;^:S����6��:�b�[�T�(MN�`�����@�%����o=Q
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Currently enabled options:
+ %s
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on  new Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd bytes.
+ old Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd, main archive=%jd.
+%d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not a regular file%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s subprocess failed with wait status code %d%s subprocess returned error exit status %d%s subprocess was interrupted%s subprocess was killed by signal (%s)%s%s suggests %s%s was locked by another process
+%s%s was locked by another process with pid %d
+%s%s%s%s: %s%s:%s
+ %s
+%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: %s%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%.255s' is not a Debian format archive'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field present for package with inappropriate '%s' field'%s' field value '%.250s''%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version '%s''%s' field, reference to '%.255s': version contains '%c' instead of '%c''%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' is not a valid architecture name in '%s' field: %s'%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s does not support (yet) reading the .deb from standard input--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one <archname> argument--%s takes one <pkgname> argument--%s takes one <trigname> argument--%s takes one <version> argument--%s takes one package name argument--%s takes only one argument (.deb filename)--%s used with obsolete relation operator '%s'--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><dpkg-deb --info pipe><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Authentication is required to run update-alternativesCommands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -i|--install       <.deb file name>... | -R|--recursive <directory>...
+  --unpack           <.deb file name>... | -R|--recursive <directory>...
+  -A|--record-avail  <.deb file name>... | -R|--recursive <directory>...
+  --configure        <package>... | -a|--pending
+  --triggers-only    <package>... | -a|--pending
+  -r|--remove        <package>... | -a|--pending
+  -P|--purge         <package>... | -a|--pending
+  -V|--verify [<package>...]       Verify the integrity of package(s).
+  --get-selections [<pattern>...]  Get list of selections to stdout.
+  --set-selections                 Set package selections from stdin.
+  --clear-selections               Deselect every non-essential package.
+  --update-avail [<Packages-file>] Replace available packages info.
+  --merge-avail [<Packages-file>]  Merge with info from file.
+  --clear-avail                    Erase existing available info.
+  --forget-old-unavail             Forget uninstalled unavailable pkgs.
+  -s|--status [<package>...]       Display package status details.
+  -p|--print-avail [<package>...]  Display available version details.
+  -L|--listfiles <package>...      List files 'owned' by package(s).
+  -l|--list [<pattern>...]         List packages concisely.
+  -S|--search <pattern>...         Find package(s) owning file(s).
+  -C|--audit [<package>...]        Check for broken package(s).
+  --yet-to-unpack                  Print packages selected for installation.
+  --predep-package                 Print pre-dependencies to unpack.
+  --add-architecture <arch>        Add <arch> to the list of architectures.
+  --remove-architecture <arch>     Remove <arch> from the list of architectures.
+  --print-architecture             Print dpkg architecture.
+  --print-foreign-architectures    Print allowed foreign architectures.
+  --assert-<feature>               Assert support for the specified feature.
+  --validate-<thing> <string>      Validate a <thing>'s <string>.
+  --compare-versions <a> <op> <b>  Compare version numbers - see below.
+  --force-help                     Show help on forcing.
+  -Dh|--debug=help                 Show help on debugging.
+
+Commands:
+  -s, --status [<package>...]      Display package status details.
+  -p, --print-avail [<package>...] Display available version details.
+  -L, --listfiles <package>...     List files 'owned' by package(s).
+  -l, --list [<pattern>...]        List packages concisely.
+  -W, --show [<pattern>...]        Show information on package(s).
+  -S, --search <pattern>...        Find package(s) owning file(s).
+      --control-list <package>     Print the package control file list.
+      --control-show <package> <file>
+                                   Show the package control file.
+  -c, --control-path <package> [<file>]
+                                   Print path for package control file.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not chroot into maintainer script environmentDo not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnore a missing stat override when removing itIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstall or remove incidental packages even when on holdInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: removing the lock file is always wrong, and can end up damaging the
+locked area and the entire system. See <https://wiki.debian.org/Teams/Dpkg/FAQ>.Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Options:
+  --package <package>      name of the package whose copy of <file> will not
+                             be diverted.
+  --local                  all packages' versions are diverted.
+  --divert <divert-to>     the name used by other packages' versions.
+  --rename                 actually move the file aside (or back).
+  --no-rename              do not move the file aside (or back) (default).
+  --admindir <directory>   set the directory with the diversions file.
+  --instdir <directory>    set the root directory, but not the admin dir.
+  --root <directory>       set the directory of the root filesystem.
+  --test                   don't do anything, just demonstrate.
+  --quiet                  quiet operation, minimal output.
+  --help                   show this help message.
+  --version                show the version.
+
+Options:
+  -v, --verbose                    Enable verbose output.
+  -D, --debug                      Enable debugging output.
+      --showformat=<format>        Use alternative format for --show.
+      --deb-format=<format>        Select archive format.
+                                     Allowed values: 0.939000, 2.0 (default).
+      --nocheck                    Suppress control file check (build bad
+                                     packages).
+      --root-owner-group           Forces the owner and groups to root.
+      --[no-]uniform-compression   Use the compression params on all members.
+  -z#                              Set the compression level when building.
+  -Z<type>                         Set the compression type used when building.
+                                     Allowed types: gzip, xz, none.
+  -S<strategy>                     Set the compression strategy when building.
+                                     Allowed values: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite an existing stat override when adding itOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplaced by files in installed package %s (%s) ...
+Replacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Run update-alternatives to modify system alternative selectionsSelecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Unpacking %s (%s) ...
+Unpacking %s (%s) over (%s) ...
+Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use 'apt' or 'aptitude' for user-friendly package management.
+Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use MAC based security if availableUse dpkg --contents (= dpkg-deb --contents) to list archive files contents.
+Use dpkg --info (= dpkg-deb --info) to examine archive files.
+Use dpkg with -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+on archives (type %s --help).
+
+Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenUseful environment variables:
+Validatable things: pkgname, archname, trigname, version.
+
+VersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+Would remove or purge %s (%s) ...
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %salternatives ('|') not allowed in '%s' fieldambiguous package name '%s' with more than one installed instancean error occurred with no error handling in placean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<empty>architecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchitecture name '%s' is invalid: %sarchive '%.250s' contains two control members, giving uparchive '%s' has premature member '%.*s' before '%s', giving uparchive '%s' is not a regular filearchive '%s' uses unknown compression for member '%.*s', giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive details '%s' field not allowed in status filearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'boolean (yes/no) '%s' field: %sbroken due to failed removal or installationbroken due to postinst failurebuilding an unknown package in '%s'.building package '%s' in '%s'.can't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot access archive '%s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot convert multibyte sequence '%s' to a wide charactercannot convert multibyte string '%s' to a wide-character stringcannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot create administrative directory '%s'cannot create base directory for %scannot create directory %scannot create the dpkg database directory %scannot create the dpkg updates directory %scannot divert directoriescannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot get package %s filesystem last modification timecannot get security labeling handlecannot open %scannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open directory '%s'cannot open file %scannot open security status notification channelcannot read %scannot read config file directory '%.250s' (from '%.250s')cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot set primary group ID to rootcannot set security context for file object '%s'cannot set security execution context for maintainer scriptcannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot stat pathname '%s'cannot write file %s into the pagercannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptcompressing tar memberconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile file contains an empty lineconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile name '%s' is not an absolute pathnameconffile name '%s' is too long, or missing final newlineconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file '%s' for package '%s' contains empty filenamecontrol file '%s' for package '%s' is missing final newlinecontrol file '%s' for package '%s' is missing valuecontrol file '%s' for package '%s' is missing value separatorcontrol file contains %ccontrol membercorrupt info database format file '%s'corrupted filesystem tarfile in package archivecould not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving triggers unprocesseddependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent processing triggers for %s:
+%sdependency problems prevent removal of %s:
+%sdeprecated --%s option; use --%s insteaddiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+diverting file '%s' from an Essential package with rename is dangerous, use --no-renamedone
+downgrading %.250s from %.250s to %.250sdpkg database lockdpkg frontend lockdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty archive details '%s' fieldempty field nameempty string from fgets reading conffilesempty trigger names are not permittedempty value for '%s' fieldend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)end of file on stdin at conffile promptepochepoch in version is emptyepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error processing archive %s (--%s):
+ %serror processing package %s (--%s):
+ %serror reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while cleaning uperror while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' cannot start with hyphenfield name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not a Debian binary archive (try dpkg-split?)file '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedfirst (want) word in '%s' field: %sforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentformat version with too big major componentformat version with too big minor componentfound unknown packages; this might mean the available database
+is outdated, and needs to be updated through a frontend method;
+please see the FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>generated corrupt ar header for '%s'group '%s' does not existhas invalid value '%.50s'has trailing junkheader is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinfo database format (%d) is bogus or too new; try getting a newer dpkginfo file %s/%s not associated to any packageinstallation of %.250sinstalledinstalled %s package %s scriptinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal errorinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid package name in '%s' field: %sinvalid statoverride gid %sinvalid statoverride mode %sinvalid statoverride uid %sinvalid statusinvalid tar header checksuminvalid tar header checksum fieldinvalid tar header gid fieldinvalid tar header mtime fieldinvalid tar header size fieldinvalid tar header uid fieldinvalid tar header with empty name fieldinvalid trigger name '%.250s': %.250sis missing a valueline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slaveloading control file '%s' for package '%s'loading files list file for package '%s'local diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing '%s' fieldmissing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnew %s package %s scriptnewline in field name '%.*s'newline not allowed in archive object name '%.255s'newline not allowed in pathname '%s'newlines prohibited in update-alternatives files (%s)no 'control' file in control archive!no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot enough privileges to change root directory with --force-not-root, consider using --force-script-chrootless?not installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '%s' field usedobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete compression type '%s'; use xz insteadobsolete compression type '%s'; use xz or gzip insteadobsolete force/refuse option '%s'obsolete option '--%s'old %s package %s scriptold conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoutside error context, abortingoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s (%s) with field '%s: %s' is not co-installable with %s which has multiple installed instancespackage %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package architecture is missing or emptypackage contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has '%s' field but is architecture '%s'package has '%s' field but is missing architecturepackage has status %s and has conffiles, forgetting thempackage has status %s but no triggers awaitedpackage has status %s but no triggers pendingpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting a removalpackage is in a very bad inconsistent state; you should
+ reinstall it before attempting configurationpackage may not contain newlinespackage namepackage name '%s' is invalid: %spackage name has characters that aren't lowercase alphanums or '-+.'package not in status nor available database at line %d: %.250spackage signature verificationpackage version numberpager to show fileparsing file '%.255s' near line %d:
+ parsing file '%s' near line %d package '%s':
+ part %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)partially read tar headerpassed
+pastepath may not contain newlinesplease specify --no-rename explicitly, the default will change to --rename in 1.20.xpre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %squadstate (foreign/allowed/same/no) '%s' field: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerequired read/write access to the dpkg database directory %srequired write access to dpkg database directory '%s' for bulk available updaterevision number is emptyrm command for cleanuproot or empty directory listed as a conffile in '%s' fieldsearched, but found no packages (files matching *.deb)second (error) word in '%s' field: %ssection<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesshowing package list on pagerskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filesyntax error in triggers deferred file '%.250s' at line %d character %zd '%s'takes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upthird (status) word in '%s' field: %sthis is an essential package; it should not be removedto return to automatic updates use '%s --auto %s'too few values in archive details '%s' field (compared to others)too many errors, stoppingtoo many nested errors during error recoverytoo many values in archive details '%s' field (compared to others)too-long line or missing newline in '%.250s'treewalk root %s is not a directorytrigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name '%s' is invalid: %strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers database locktriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to access dpkg database directory '%s' for bulk available updateunable to access the dpkg database directory %sunable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to check lock file for dpkg database directory %sunable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create dpkg database lock file for directory %sunable to open/create dpkg frontend lock for directory %sunable to open/create new triggers deferred file '%.250s'unable to open/create triggers lock file '%.250s'unable to parse timestamp '%.255s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat '%.255s' (which was about to be installed)unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file after package name at line %dunexpected end of file before end of line %dunexpected end of file in %s in %.255sunexpected end of file in package name at line %dunexpected end of file or streamunexpected end of file reading '%.250s'unexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunexpected pre-existing pathname %sunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown system group '%s' in statoverride file; the system group got removed
+before the override, which is most probably a packaging bug, to recover you
+can remove the override manually with %sunknown system user '%s' in statoverride file; the system user got removed
+before the override, which is most probably a packaging bug, to recover you
+can remove the override manually with %sunknown tar header type '%c'unknown verify output format '%s'unknown wanted status at line %d: %.250sunpacked but not configuredunrecoverable fatal error, abortingunsupported GNU tar header type '%c'unsupported PAX tar header type '%c'unsupported Solaris tar header type '%c'unsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has line starting with non-space '%c'value for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion '%s' has bad syntax: %sversion number does not start with digitversion number is emptyversion string has embedded spacesversion string is emptyversioned Provideswait for %s subprocess failedwait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingword in '%s' field: %syes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou do not have permission to lock the dpkg database directory %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.20.0
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2020-06-14 21:45-0400
+Last-Translator: Boyuan yang <byang@debian.org>
+Language-Team: Chinese (simplified) <debian-l10n-chinese@lists.debian.org>
+Language: zh_CN
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=1; plural=0;
+X-Generator: Poedit 2.3.1
+
+ 无法解决的软件包未决触发器：
+
+系统中并未发现配置 %s。
+如您所愿，安装了新的配置文件。
+
+当前启用的选项:
+ %s
+
+调试选项可以用“按位或”来组合使用。
+请注意，意义和数值可能有变动。
+
+使用 dpkg 命令可以在系统中安装和卸载软件包，
+ apt 或 aptitude 命令则用于简便的软件包管理。另外，
+通过 dpkg-deb --extract 命令解压的软件包将
+不会被正确安装！
+
+【警告】- 使用标记有 [!] 的选项会严重破坏您的安装。
+标记有 [*] 的强制选项默认为开启。
+     在安装后未曾更动。
+     软件包的版本和上次安装的版本是相同的。
+     不是普通文件              %.255s
+   您现在希望如何处理呢？ 您有以下几个选择：
+    Y 或 I  ：安装软件包维护者所提供的版本
+    N 或 O  ：保留您原来安装的版本
+      D     ：显示两者的区别
+      Z     ：把当前进程切换到后台，然后查看现在的具体情况
+  %.250s (版本为 %.250s)已存在并且 %s。
+  即将安装 %.250s (版本为 %.250s)。
+  %.250s 现在 %s。
+  已安装 %.250s，但安装的版本是 %.250s。
+  %.250s 未安装。
+  即将反配置 %.250s。
+  即将安装 %.250s，但安装的版本是 %.250s。
+  即将卸载 %.250s。
+  已解压 %.250s，但仍未配置。
+  已解压 %.250s，但它的版本是 %.250s。
+  上次配置 %.250s 时，它的版本是 %.250s。
+  %.250s 提供了 %.250s 并已存在而且 %s。
+  %.250s 提供了 %.250s，它将被安装。
+  %.250s 提供了 %.250s，但是它现在 %s。
+  %.250s 提供了 %.250s，但是它的配置信息将被抹去。
+  %.250s 提供了 %.250s，但是它即将被删除。
+%s (%s)提供 %s。
+  -?, --help                       显示本帮助信息。
+      --version                    显示版本信息。
+
+  软件包 %s 正在等待触发器处理。
+  软件包 %s 尚未配置。
+  未安装软件包 %s。
+  即将删除 %s。
+  提供了 %2$s 的软件包 %1$s 正在等待触发器处理。
+  软件包 %s 提供了 %s，但它尚未被配置。
+  提供 %2$s 的软件包 %1$s 未安装。
+  提供了 %2$s 的软件包 %1$s 即将被删除。
+系统中 %s 的版本为 %s。
+系统中 %s 的版本（由 %s 提供）是 %s 。
+  将被配置的 %s 的版本为 %s。
+  链接 %s 指向 %s  最佳链接版本为 %s  最佳链接版本不可用 链接目前不存在 链接目前指向 %s  从链接 %s 指向 %s  次要 %s：%s %7jd 字节，%5d 行   %c  %-20.127s %.127s
+ 在 %2$s 有 %1$d 个： 在下列类别中，有 %d 个软件包： %s (%jd 字节)
+ %s (%s)破坏 %s 并且 %s。
+ %s (不是普通文件)
+ ==> 在安装后曾被删除(您或者某个脚本删除了它)。
+ ==> 系统中的这个文件或者是由您创建的，或者是由脚本建立的。
+ ==> 软件包维护者所提供的软件包中也包含了该文件。
+ ==> 按照默认设置，保留原有的配置文件。
+ ==> 在安装后曾被修改(您或者某个脚本修改了它)。
+ ==> 软件包的提交者同时提供了一个更新了的版本。
+ ==> 如您所愿，保留原来的配置文件不变。
+ ==> 按照默认设置，安装新的配置文件。
+ ==> 如您所愿，安装了新的配置文件。
+ 软件包 %s: 部分 默认的处理办法是安装新的版本。
+ 默认的处理方法是保留您当前使用的版本。
+ 和  依赖于  新格式的 Debian 软件包，格式版本 %d.%d。
+ 大小 %jd 字节：主控包=%jd 字节。
+ 旧格式的 Debian 软件包，版本 %d.%d。
+ 大小 %jd 字节：主控包= %jd 字节，数据及程序包= %jd。
+%d 在环境变量 PATH 中找不到该程序，或不可执行
+%s系统当前共安装有 %d 个文件和目录。)
+%d 个必要的控制组件没有找到%s (子进程)：%s
+%s - 优先级 %d%s 会破坏 %s%s 与之冲突 %s%s 损坏：%s%s 调试选项, --debug=<八进制数> or -D<八进制数>:
+
+ 数值    源码中对应       描述       
+%s 依赖于 %s%s 强化 %s%s 强制选项 - 当遇到问题时控制软件行为：
+  警告后仍然继续:     --force-<手段>,<手段>,...
+  遇错即停:           --refuse-<手段>,<手段>,... | --no-force-<手段>,...
+ 可强制执行的“手段”:
+%s 不是普通文件%s 没有被正常安装； 将忽略所有对它的依赖关系%s 预依赖于 %s%s 推荐 %s%s 子进程失败，获得的等待状态号为 %d%s 子进程返回错误状态 %d%s 子进程被中断%s 子进程被信号(%s)%s 终止了%s 建议 %s%s 已被另一个进程加锁
+%s%s 已被另一个 pid 为 %d 的进程加锁
+%s%s%s%s: %s%s:%s
+ %s
+%s：
+    分块的格式版本：                %d.%d
+    是这个软件包的分块：            %s
+        ... 版本：                  %s
+        ... 体系结构：              %s
+        ... MD5 校验和：            %s
+        ... 大小：                  %jd 字节
+        ... 每个分块的大小：        %jd 字节
+    分块文件的编号：                %d/%d
+    分块文件的中分块的大小：        %jd 字节
+    分块文件的偏移位置：            %jd 字节
+    分块文件(被使用的部分)的大小：  %jd 字节
+
+%s：警告 - conffile  %.250s 不是普通文件或者符号链接 (=  %s )%s：无法找到 conffile %.250s 最终指向的文件
+ ( %s 是一个指向 %s 的符号链接)%s：配置文件 %s 是一个循环(最终指向自己)链接
+ (=  %s )%s：尽管有依赖关系的问题，但不管怎样，还是按照您的要求，继续配置：
+%s%s：有依赖问题，但是如您所愿，继续处理触发器：
+%s%s：有依赖问题，但是如您所愿，将继续卸载：
+%s%s：将输入绑定到 bzip2 流时失败%s：将输入绑定到 gzip 流时出错%s：将输出绑定到 bzip2 流时出错%s：将输出绑定到 gzip 流时出错%s：将 %.250s 链接到 %.250s 失败：%s%s：无法删除 %.250s (在覆盖前)：%s%s：删除 %.250s 失败：%s%s：无法删除以前的备份文件 %.250s ：%s%s：无法删除以前的发布版本 %.250s ：%s%s：无法将 %.250s 改名为 %.250s ：%s%s：内部 bzip2 读取错误%s：内部 bzip2 读取错误：%s%s：内部 bzip2 写入错误%s：内部 bzip2 写入错误：%s%s：内部 gzip 读取错误%s：内部 gzip 读取错误：%s%s：内部 gzip 读取错误：%s%s：内部 gzip 写入错误%s：内部 gzip 写入错误：%s%s：内部 gzip 写入错误：%s%s: lzma 关闭错误%s：lzma 错误：%s%s：lzma 读取错误%s：lzma 写入错误%s: 对等拷贝出错: %s%s：无法打开 %s 来作哈希处理：%s%s：无法 readlink conffile  %s 
+ (=  %s )：%s%s：无法获得配置文件 %s 的状态
+ (=  %s )：%s%.255s 中没有发现控制组件 %.255s%.255s 并非 Debian 格式的包文件%s  与  %s  冲突%s 含有用户自定义的优先级别(Priority value)  %s '%s' 选项不需要参数软件包有 '%s' 字段，但存在不相符的 '%s' 字段'%s' 字段值 '%.250s'%s 字段，无效的软件包名 %.255s :%s'%s' 字段缺少体系结构名，或者填写的体系结构名称无效%s" 字段中缺少软件包名，或者填写的软件包名无效'%s' 字段，引用 '%.255s' :
+ '%c'  已被废弃，请使用 '%c=' 或者 '%c%c' %s 字段，引用 %.255s :
+ 错误的版本依赖关系 %c%c'%s' 字段，引用 '%.255s' :
+ 未明确要求版本号完全一致，建议使用 '=''%s' 字段，引用 '%.255s' :
+ 版本号以非字母数字字符开头，建议加一个空格%s 字段，引用 %.255s : 无效的体系结构名 '%.255s': %s'%s' 字段，引用 '%.255s': 版本 '%s''%s' 字段，引用 '%.255s' ：版本号含有 '%c' 而非 '%c''%s' 字段，引用 '%.255s' ：版本号未终止'%s' 字段，在引用软件包 '%.255s' 后有语法错误'%s' 不是有效的 '%s' 字段体系结构名称: %s'%s' 选项需要一个参数在 PATH 环境变量中找不到 %s 或没有可执行权限(注意到 %s 已经不复存在，它已然被完全取代了。)
+(正在读取数据库 ... (无描述)(共计 %jd 字节)
+，核心已转储-%c 选项不需要参数-%c 选项需要一个参数--%s --pending 不需要任何不是选项的参数--%s --recursive 递归执行需要至少一个路径作为参数--%s 到目前为止仍不支持从标准输入读取 .deb 文件--%s 需要一个 .deb 文件的文件名作为参数--%s 需要 <名称>--%s 需要 <名称> <路径>--%s 需要一个 .deb 文件的文件名作为参数--%s 需要一个 <目录> 参数--%s 需要一个<文件>参数--%s 需要一个参数--%s 需要一个目录作为目标目录。
+或许您应该使用 dpkg --install？--%s 需要一个有效的软件包名。而 %.250s 不是: %s--%s 需要至少一个软件包文件作为参数--%s 需要至少一个软件包名作为参数--%s 需要四个参数--%s 选项不需要参数--%s 选项需要一个参数--%s 需要一个八进制的参数--%s 需要一个或多个部分文件作为参数--%s 只需要一个“软件包文件名”作为参数--%s 至多可有两个参数--%s 至多能有两个参数(分别是 .deb 文件和目录)--%s 需要且仅需一个参数--%s 需要且仅需两个参数--%s 不需要任何参数--%s 需要一个 <archname> 作为参数--%s 需要一个 <pkgname> 作为参数--%s 需要一个 <trigname> 作为参数--%s 需要一个 <version> 参数--%s 需要一个软件包名作为参数--%s 只带一个参数(即 .deb 文件的文件名)--%s 使用了废弃的关系操作符 '%s'--auto 命令需要且仅需要一个分块文件的文件名作为参数--auto 命令需要与 --output 选项一同使用--compare-versions 错误的比较关系--compare-versions 需要三个参数，它们分别是：<版本号> <比较关系> <版本号>--search 需要至少一个文件名表达式作为参数--split 需要一个原始文件作为参数--split 需要至多一个原始文件，以及目标文件的文件名前缀作为参数--update 已指定但 %s 不存在对于 --remove，--update 是无效的... 它看起来没有问题.../%s；然而：
+<压缩> 自 tar -cf<deb> 是 Debian 格式归档文件的文件名。
+<cfile> 是管理文件组件的文件名。
+<cfield> 是主控文件中的属性字段的名字。
+
+<解压缩><dpkg-deb --info pipe><链接> 和 <路径> 不能相同<链接> 是指向 %s/<名称> 的符号链接。
+    (如 /usr/bin/pager)
+<名称> 是该链接替换组的主控名。
+    (如 pager)
+<路径> 是候选项目标文件的位置。
+    (如 /usr/bin/less)
+<优先级> 是一个整数，在自动模式下，这个数字越高的选项，其优先级也就越高。
+
+<软件包状态和进度文件描述符><标准错误><标准输入><标准输出>正在添加 %s
+允许安装存在冲突的软件包候选项 %s 未改变，因为选项 %s 不可用。总是安装缺失的配置文件总是使用新的配置文件，不提示总是使用旧的配置文件，不提示另一进程已经锁定数据库以写入，并可能正在对其进行修改，一些问题可能正是由此导致的。
+体系结构正在验证 %s ...
+需要认证后才能执行 update-alternatives命令：
+  --add <所有者> <用户组> <权限位> <文件名>
+                           在数据库中加入一个新的 <路径>。
+  --remove <文件名>        将 <路径> 从数据库中删除。
+  --list [<glob 模式>]     列出当前数据库中的 override 条目。
+
+命令：
+  --check-supported                检查正在运行的 dpkg 是否支持触发器。
+
+命令：
+  --install <链接> <名称> <路径> <优先级>
+    [--slave <链接> <名称> <路径>] ...
+                           在系统中加入一组候选项。
+  --remove <名称> <路径>   从 <名称> 替换组中去除 <路径> 项。
+  --remove-all <名称>      从替换系统中删除 <名称> 替换组。
+  --auto <名称>            将 <名称> 的主链接切换到自动模式。
+  --display <名称>         显示关于 <名称> 替换组的信息。
+  --query <名称>           机器可读版的 --display <名称>.
+  --list <名称>            列出 <名称> 替换组中所有的可用候选项。
+  --get-selections         列出主要候选项名称以及它们的状态。
+  --set-selections         从标准输入中读入候选项的状态。
+  --config <名称>          列出 <名称> 替换组中的可选项，并就使用其中
+                           哪一个，征询用户的意见。
+  --set <名称> <路径>      将 <路径> 设置为 <名称> 的候选项。
+  --all                    对所有可选项一一调用 --config 命令。
+
+命令：
+  -i|--install       <.deb 文件名> ... | -R|--recursive <目录> ...
+  --unpack           <.deb 文件名> ... | -R|--recursive <目录> ...
+  -A|--record-avail  <.deb 文件名> ... | -R|--recursive <目录> ...
+  --configure        <软件包名>    ... | -a|--pending
+  --triggers-only    <软件包名>    ... | -a|--pending
+  -r|--remove        <软件包名>    ... | -a|--pending
+  -P|--purge         <软件包名>    ... | -a|--pending
+  -V|--verify <软件包名> ...       检查包的完整性。
+  --get-selections [<表达式> ...]  把已选中的软件包列表打印到标准输出。
+  --set-selections                 从标准输入里读出要选择的软件。
+  --clear-selections               取消选中所有不必要的软件包。
+  --update-avail <软件包文件>      替换现有可安装的软件包信息。
+  --merge-avail  <软件包文件>      把文件中的信息合并到系统中。
+  --clear-avail                    清除现有的软件包信息。
+  --forget-old-unavail             忘却已被卸载的不可安装的软件包。
+  -s|--status      <软件包名> ...  显示指定软件包的详细状态。
+  -p|--print-avail <软件包名> ...  显示可供安装的软件版本。
+  -L|--listfiles   <软件包名> ...  列出属于指定软件包的文件。
+  -l|--list  [<表达式> ...]        简明地列出软件包的状态。
+  -S|--search <表达式> ...         搜索含有指定文件的软件包。
+  -C|--audit [<表达式> ...]        检查是否有软件包残损。
+  --yet-to-unpack                  列出标记为待解压的软件包。
+  --predep-package                 列出待解压的预依赖。
+  --add-architecture    <体系结构> 添加 <体系结构> 到体系结构列表。
+  --remove-architecture <体系结构> 从体系结构列表中移除 <体系结构>。
+  --print-architecture             显示 dpkg 体系结构。
+  --print-foreign-architectures    显示已启用的异质体系结构。
+  --assert-<特性>                  对指定特性启用断言支持。
+  --validate-<属性> <字符串>       验证一个 <属性>的 <字符串>。
+  --compare-versions <a> <关系> <b> 比较版本号 - 见下。
+  --force-help                     显示本强制选项的帮助信息。
+  -Dh|--debug=help                 显示有关出错调试的帮助信息。
+
+命令：
+  -s, --status <软件包> ...        显示软件包详尽的状态信息。
+  -p, --print-avail <软件包> ...   显示当前可供安装的版本的详细信息。
+  -L, --listfiles <软件包> ...     列出所有属于这个(些)软件包的文件。
+  -l, --list [<表达式> ...]        简要地列出软件包。
+  -W, --show <表达式> ...          显示软件包的相关信息。
+  -S, --search <表达式> ...        搜寻拥有该文件(或多个文件)的软件包。
+      --control-list <软件包>      打印软件包控制文件列表。
+      --control-show <软件包> <文件>
+                                   显示软件包控制文件。
+  -c, --control-path <软件包> [<文件>]
+                                   显示软件包控制文件的路径。
+
+命令：
+  -s|--split <文件> [<前缀>]          分割包文件。
+  -j|--join <分块文件> <分块文件> ... 把各个分块合并到一起。
+  -I|--info <分块文件> ...            显示分块文件的相关信息。
+  -a|--auto -o <完整> <分块文件>      自动累积分块文件。
+  -l|--listq                          列出不匹配的部分。
+  -d|-discard [<文件名> ...]          忽略不匹配的部分。
+
+命令：
+  [--add] <文件名>         添加一个转移项。
+  --remove <文件名>        删除这个转移项。
+  --list [<glob 模式>]     列出各文件转移项。
+  --listpackage <文件>     显示哪个软件包转移了指定文件。
+  --truename <文件名>      返回被本地转移的原始文件。
+
+可供--compare-versions 使用的比较运算符有：
+ lt le eq ne ge gt        (如果版本号为空，那么就认为它先于任意版本号)；
+ lt-nl le-nl ge-nl gt-nl  (如果版本号为空，那么就认为它后于任意版本号)；
+ < << <= = >= >> >        (仅仅是为了与主控文件的语法兼容)。
+
+配置文件 '%s'
+配置文件 %s (实际上为'%s')
+配置任何可能与这有关的软件包正在反配置 %s (%s) ...
+正在反配置 %s (%s)，以允许删除 %s (%s) ...
+Debian %s 软件包管理程序查询工具 %s 版。
+ Debian %s 软件包触发器工具 %s 版。
+Debian %s 版本 %s。
+Debian %s 软件包后端打包程序 %s 版。
+Debian %s 软件包管理程序 %s 版。
+Debian %s 软件包分割/重组工具 %s 版。
+已将 %s 删除。
+依赖和冲突描述期望状态=未知(u)/安装(i)/删除(r)/清除(p)/保持(h)
+| 状态=未安装(n)/已安装(i)/仅存配置(c)/仅解压缩(U)/配置失败(F)/不完全安装(H)/触发器等待(W)/触发器未决(T)
+|/ 错误?=(无)/须重装(R) (状态，错误：大写=故障)
+不要 chroot 到维护者脚本环境中不要在解压的时候进行安全I/O操作在处理时有错误发生：
+退出状态：
+  0 = ok
+  1 = 有 --auto 选项，文件不是一个分块
+  2 = 有问题
+文件 %.250s 并非多卷包文件的一个分块文件。
+格式串的语法：
+  格式串是用于显示每一个软件包的字符串。格式串可以包含标准的
+  脱字符(escape sequences)，如 \n (换行)、\r (回车)、或是 \\ (反斜杠)。
+  还可以通过加入软件包属性的变量引用来反映软件包的相关信息，
+  要在某些字段引用属性变量的话，可以用这样的语法：${var[;width]}。
+  字段一般是靠右对齐的，除非它的宽度是负数。若其宽度是负数，
+  那么字段将会靠左对齐。
+常规的进度信息忽略一个在移除时缺失的 stat 重载忽略删除共享转移 %s 的要求。
+忽略重命名 %s 的要求，该文件属主为转移软件包 %s
+共更新了 %d 个软件包的相关信息。
+数量惊世骇俗的琐碎输出安装一个软件包，即使它的真实性检查失败继续安装，即使它会损坏另一个软件包安装或删除意外的软件包，即使它处于搁置状态正在安装新版本配置文件 %s ...
+维护者脚本的调用和状态在存储目录留下了一些无用文件：
+正在忽略 %s
+依赖和冲突细节大量琐碎细节，比如关于 dpkg/info 目录每个配置文件的大量输出每个文件处理后的大量输出有关触发器的大量输出在字段名 %.*s 中有 MSDOS EOF (^Z)在字段 %.*s 的值里有MSDOS EOF(^Z)字符(缺失换行符？)在这此运行中，软件包 %s 有多个副本被解压缩了！
+现只配置它一次。
+名称没有转移项 %s，因此没有删除。
+注意：删除锁文件的操作是错误的，这样操作会损坏上锁的部分甚至损坏
+个系统。详情请见 <https://wiki.debian.org/Teams/Dpkg/FAQ>。提示：root 的 PATH 环境变量通常应当包含 /usr/local/sbin、/usr/sbin 和 /sbin无需配置。建议不以新版本配置文件取代原有版本选项：
+  --admindir=<目录>                使用 <目录> 而不是 %s。
+  --by-package=<软件包>            重写触发器等待者(通常由 dpkg 设置)。
+  -await                           软件包需要等待处理。
+  --no-await                       没有软件包需要等待处理。
+  --no-act                         仅测试 - 不真正进行改动。
+
+选项：
+  --depotdir <目录>                使用<目录>而非 %s/%s。
+  -S|--partsize <大小>             -s 的单位改用 KiB (默认是 450)。
+  -o|--output <文件>               对应 -j (默认文件名是 <软件包名>-<版本号>.deb)。
+  -Q|--npquiet                     不用 -a 时，少输出信息。
+  --msdos                          使用 8.3 的文件名格式。
+
+选项：
+  --package <软件包名>     该软件包中的 <文件名> 副本将不会被转移。
+  --local                  所有软件包的版本均会被转移。
+  --divert <转移目标名>    其它软件包版本将转而使用的文件名。
+  --rename                 实际上把该文件挪开(或是还原)。
+  --no-rename              不将文件移动至旁边(或者移回)(默认)。
+  --admindir <目录名>      设置转移文件所在的目录。
+  --instdir <目录名>       设置根目录，但不包括管理员目录。
+  --root <目录名>          设置根文件系统的目录。
+  --test                   仅仅演示要进行的操作，而不是真正的执行它们。
+  --quiet                  安静模式，输出尽可能少的信息。<
+  --help                   显示本帮助信息。
+  --version                显示版本信息。
+
+选项：
+  -v, --详细                       启用详细输出。
+  -D, --debug                      启用调试信息输出。
+      --showformat=<格式>          对 --show 使用备用的输出格式。
+      --deb-format=<格式>          选择归档格式。
+                                   允许的值： 0.939000, 2.0 (默认)
+      --nocheck                    阻止控制文件的检查。(构建坏的软件包)
+      --root-owner-group           强制设置文件属主和属组为 root。
+      --[no-]uniform-compression   在所有成员上使用压缩参数。
+  -z#                              设置构建时使用的压缩级别。
+  -Z<类型>                         设置构建时使用的压缩类型。
+                                     可用的类型: gzip, xz, bzip2, none.
+  -S<策略>                         设置构建时使用的压缩策略。
+                                     可用的值: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+每个配置文件的输出每个文件处理后的输出以原封未动的文件覆盖一个转移文件将一个软件包的文件覆盖到另一个包的文件上在添加一个 stat 重载时盖写它用其他软件包的文件覆盖一个软件包的目录环境变量 PATH 里缺失重要的程序，问题可能没有设置 PATH 环境变量软件包 %s 被要求保持原来的版本，因而不会去改动它。请使用 --force-hold 选项来忽略该设置。
+多次列出了软件包 %s，它将只被处理一次。
+软件包 %s 未含有任何文件(!)
+包文件尚未被重新组合好：
+软件包 %2$s 共有 %1$d 个分块被存档 (但还缺少 路径预依赖字段准备解压 %s  ...
+要维持当前值[*]请按<回车键>，或者键入选择的编号：优先级继续处理，即使软件包没有体系结构或者体系结构错误继续处理，即使软件包版本错误正在处理用于 %s (%s) 的触发器 ...
+由于出现了太多错误，处理过程被中止了。
+正在清除 %s (%s) 的配置文件 ...
+从 %2$d 个部分整合软件包 %1$s：从 %2$s 获得的关于 %1$s 的信息。
+移除一个至关重要的软件包移除要求安装的软件包正在卸载 %s (%s) ...
+正在删除 %s
+以旧版本的软件包来代替现有软件包被已安装的软件包 %s (%s) 中的文件替换了...
+正在使用 %s 替换可用软件包的信息。
+正在替换原软件包中的文件 %s (%s) ...
+运行 update-alternatives 工具以修改系统可选项的选择情况正在选中未选择的软件包 %s。
+选择设置所有的强制选项正在设置 %s (%s) ...
+数量惊人的关于触发器的输出跳过无效行：%s跳过位置候选项 %s。正在忽略未选择的软件包 %s。
+正将软件包 %s 分割到 %d 个分块中：状态下列软件包正在等待由它们在其他软件包激活的触发器处理。
+该处理可以使用 dselect 或者 dpkg --configure --pending
+(或者 dpkg --triggers-only)来请求：
+由于在安装过程中遇到严重的问题，下列软件包的状态存在严重问题。
+若要令其运行正常，您必须重新安装它们
+(以及所有依赖于它们的软件包)：
+下列软件包在数据库中缺少列表控制文件，
+它们需要被重新安装：
+下列软件包在数据库中缺少md5校验和控制文件，
+他们需要被重新安装：
+下列软件包只是被不全面地配置了，这也许要归咎于
+第一次配置它们时出的问题。您最好能重新配置它们。
+借助 dpkg --configure <软件包名> 或者用 dselect 
+菜单中的配置项重新配置软件包：
+下列软件包被不完整地安装了，这要归咎于
+安装时出的问题。再试一次可能就能完成安装；
+借助 dselect 或 dpkg --remove 可以把这些软件包删除：
+下列软件包没有体系结构：
+下列软件包有非法体系结构：
+下列软件包具有未知的异质体系结构，这些体系结构会在前端中
+引发依赖问题。您可以通过 dpkg --add-architecture
+添加这个外来体系结构以修复此问题：
+下列软件包被触发，但触发器处理尚未完成。触发器处理可以使用 dselect 或者 
+dpkg --configure --pending (或者 dpkg --triggers-only)来请求：
+下列软件包已被解开，但是尚未配置。
+要令它们运行正常，您必须借助 dpkg --configure
+或者 dselect 菜单中的配置项：
+有 %d 个候选项可用于替换 %s (提供 %s)。没有程序提供 %s。链接组 %s (提供 %s)中只有一个候选项：%s本软件是自由软件；要获知复制该软件的条件，请参阅 GNU 公共许可证
+第二版或其更新的版本。本软件【不】提供任何担保。
+触发激活和处理以非 root 权限尝试（反）安装这些东西将所有依赖问题转为警告将所有依赖版本问题转为警告当您完成操作后，请输入 “exit”。
+输入 dpkg --help 可获得安装和卸载软件包的有关帮助 [*]；
+使用 apt 或是 aptitude 就能在友好的界面下管理软件包；
+输入 dpkg -Dhelp 可看到 dpkg 除错标志的值的列表；
+输入 dpkg --force-help 可获得所有强制操作选项的列表；
+输入 dpkg-deb --help 可获得有关操作 *.deb 文件的帮助；
+
+带有 [*] 的选项将会输出较大篇幅的文字 - 可使用管道将其输出连接到 less 或 more ！输入 dpkg-deb --help 可获得有关操作 *.deb 文件的帮助；
+输入 dpkg --help 可获得有关安装和卸载软件包的帮助。输入 dpkg-split --help 就可以阅读帮助信息。输入 'dpkg-trigger --help' 以获取此功能的帮助信息。正在解压 %s (%s) ...
+正在解压 %s (%s) 并覆盖 (%s) ...
+正在使用 %s 更新可用软件包的信息。
+用法：%s [<选项> ...] <命令>
+
+使用 %s --help 查看关于程序用法的信息。'apt' 和 'aptitude' 提供了更为便利的软件包管理。
+使用 --help 查看关于转移文件的帮助。使用 --help 查看关于凌驾文件状态的帮助。使用 --help 查看关于查询软件包的帮助。如果可行则使用基于 MAC 的安全性通过 dpkg --contents (= dpkg-deb --contents) 来列出档案文件清单。
+使用 dpkg --info (= dpkg-deb --info) 来检测打包好的文件，
+调用 dpkg 并带参数 -b, --build, -c, --contents, -e, --control, -I, --info,
+  -f, --field, -x, --extract, -X, --vextract, --ctrl-tarfile, --fsys-tarfile
+是针对归档文件的。 (输入 %s --help 获取帮助)
+
+当有新的配置文件时使用默认选项，不要提示。
+如果找不到默认设置，将会有提示，除非打开
+confold 或 confnew 选项有帮助的环境变量：
+可验证的属性：pkgname, archname, trigname, version.
+
+版本带有可工作 %s 支持的 dpkg 版本尚未配置好。
+ 请运行 dpkg --configure dpkg，然后再尝试。
+当添加本地转移项的时候，默认的选项是 --local 和 --divert <原始文件名>.distrib。
+在删除本地转移项的时候，--package 或 --local 选项和 --divert 选项必须一致。
+软件包的 preinst 和 postrm 脚本通常应当指定 --package 和 --divert 选项。
+此操作会卸载或清除 %s (%s) ...
+[默认选项=N][默认选项=Y][无默认选项]为了使dpkg正常工作，管理目录必须在安装目录中同时也对 %s 进行配置( %s 需要)候选项 %s(链接组 %s 的一部分)不存在；从候选项列表中移除。候选项 %s 不能是主项：它是 %s 的次要项候选项 %s 不能作 %s 的次要项：它是一个主项候选项 %s 不能作 %s 的次要项：它是 %s 的次要项%2$s 的候选项 %1$s 没有注册，不予移除。%2$s 的候选项 %1$s 没有注册，不予设置替换链接 %s 已经由 %s 来管理了候选项链接 %s 已经由 %s (%s 的次要项)来管理了替换链接不是绝对链接，它应该是绝对链接：%s替换名称(%s)不可包含 / 和空格替换路径不是绝对路径，它应该是绝对路径：%s'%s' 字段不允许可替代项 ('|')软件包名 '%s' 含糊不清， 它有一个以上的安装实例发生了错误且不存在错误处理方法--force 已指定，所以先前对 %s 的覆盖设置会被忽略%s  的 override 已存在，正在中止任何 %s 的转移任何由 %s 至 %s 的转移ar 成员名称 '%s' 过长ar 成员尺寸 %jd 过大<空><无><未知>%s 体系结构非法：%s%s 体系结构已被保留，并且不能被添加体系结构名称 '%s' 无效: %s归档 %.250s 含有两个控制成员，放弃操作归档 %s 含有不合时宜的成员 %.*s 于 %s 之前，放弃操作归档 '%s' 不是普通文件归档 %s 对成员 %.*s 使用了未知的压缩，放弃操作包文件中含有一个对象 %.255s，无法识别它的类型 0x%x归档 control 成员尺寸状态文件不允许档案详情 ‘%s’ 字段归档的格式版本无效：%s归档 control 成员尺寸 %s 有误归档文件的文件头中没有换行归档信息头成员归档的格式版本 %d.%d；请升级 dpkg-deb归档的魔法版本数归档成员头归档分块版本号归档分块偏移量归档分块编号归档总体大小自动模式%s/%s 的自动更新功能已禁用；保持现状等待另一软件包的触发器处理在字段 %.*s 的值中有空行布尔型(是/否) '%s' 字段: %s 由于移除或安装失败而处于残损的状态由于安装后操作(postinst)失败，未能完成安装正在 '%s' 中构建未知软件包。正在 '%2$s' 中构建软件包 '%1$s'。无法安装未知的选择 %s无法 mmap 软件包的 info 文件 %.255s 无法删除原有的 postrm 脚本无法获得软件包 info 文件 %.255s 的状态无法访问归档 '%s'无法追加 ar 成员文件(%s)到 '%s': %s无法追加分割软件包分块 %s 到 %s：%s无法追加至 %s无法关闭解压管道无法计算文件 %s 的MD5哈希值：%s无法为tar文件 '%.255s' 计算MD5哈希值: %s 无法将多字节序列 '%s' 转换为一个宽字符无法将多字节字符串 '%s' 转换为宽字符串无法拷贝 %s 到归档 %s 中：%s无法拷贝 %s 到 %s：%s无法从 %s 中拷贝归档成员到解码管道中：%s无法为 '%.255s' 拷贝解压的文件至 '%.255s'： %s无法创建管理目录 "%s"无法为 %s 创建基本目录无法创建目录 %s无法创建 dpkg 数据库目录 %s无法创建 dpkg 更新目录 %s无法将目录转移无法转移文件 %s 到其本身无法从 %2$s 中抽取控制文件 %1$s：%3$s无法抽取分割软件包分块 %s: %s无法获取软件包 %s 的文件系统最后一次修改时间无法获得安全标签句柄无法打开 %s无法打开 %.255s (于 %.255s 目录)无法打开存档的分块文件 %.250s无法打开目录 '%s'无法打开文件 %s无法打开安全状态通知渠道无法读取 %s无法读取配置文件所在目录 %.250s (从 %.250s )无法读取 info 目录无法移除 %.250s无法移除体系结构 %s ，当前它仍被数据库使用无法移除非异质体系结构 %s无法删除旧有的配置文件备份 %.250s (在 %.250s 中提到)无法删除原有的配置文件 %.250s  (= %.250s )无法删除原有的文件列表无法重命名 %s 为 %s无法满足 %.250s 的预依赖关系，起因是 %.250s无法搜索目录 %.255s 无法扫描更新目录 %.255s 无法推测该如何满足预依赖关系：
+ %s不能设置主要组ID为root无法为文件对象 '%s' 设置安全上下文无法为维护者脚本设置安全执行上下文无法跳过 %s 中的归档 control 成员：%s不能从 %s 中跳过归档成员：%s无法从管道中跳过文件 %.255s (已被替换或排除？)：%s无法跳过文件 %.255s 的补齐部分： %s 无法跳过分割的软件包 %s 的头部: %s无法 stat %s无法获取 %.255s 的信息(于 %.255s 目录)无法获取文件 %s 的状态无法获取路径 %s 的状态无法写入文件 %s 到分页器无法从 dpkg-deb 的输出中截去尾缀的零数据部分：%s不允许出现字符 ‘%c’ (只能使用字母、数字和 ‘%s’)压缩数据已损坏正在压缩 tar 成员软件包内没有发现 conffile  %.250s无法 conffile  %.50s 的状态conffile  %s 不是普通文件conffile 差异观察器conffile 文件含有空行conffile  %s  的文件名后面含有空格conffile 名称 %s 重复conffile 文件名 "%s" 不是绝对路径名conffile 的文件名 %s 超长，或是缺少最后结尾的换行符conffile Shell配置错误：%s:%d：%s操作 -%c (--%s) 和 -%c (--%s) 互相冲突转移项间存在着冲突关系， %.250s 和 %.250s 中只能取其一软件包相互冲突 - 将不安装 %.250s正在考虑反配置 %s，否则会被 %s 破坏 ...正在考虑反配置基础软件包 %s，以便启用 %s。为了 %2$s，正考虑卸载 %1$s ...control目录的的权限位是 %03lo (必须 >=0755 且 <=0755)control 目录不是目录control 文件 %s 不存在软件包 '%2$s' 的控制文件 '%1$s' 含有空文件名软件包 '%2$s' 的控制文件 '%1$s' 缺少结尾换行符软件包 '%2$s' 的控制文件 '%1$s' 缺少值软件包 '%2$s' 的控制文件 '%1$s' 缺少值分隔符control 文件包含 %ccontrol 成员损坏的信息库格式文件 %s软件库中的文件系统 tar 文件已损坏无法打开日志文件 %s ：%s无法获取旧文件 %.250s 的状态，因此不删除它：%s无法为流打开 %i当前候选项 %1$s 未知，为链接组 %3$s 切换至 %2$s处理触发器时发现回路：
+ 包含或可能包含对此有责任的触发器的软件包链：数据成员依赖关系问题 - 触发器未处理依赖关系问题 - 仍未被配置依赖问题 - 不会执行卸载依赖关系问题使得 %s 的配置工作不能继续：
+%s依赖关系问题导致 %s 的触发器处理不能继续：
+%s依赖问题阻止了卸载 %s 的操作：
+%s废弃的 --%s 选项；请使用 --%s 代替舍弃废弃的次要链接 %s (%s)%s 导致转移自：%s
+%s 导致转移至：%s
+被 %2$s 转移的 %1$s通过 %3$s 从 %1$s 到 %2$s 的转移转移目标名不可以含有换行符被 %s 转移至：%s
+从至关重要的软件包中转移文件 '%s' 并重命名是非常危险的，请用 --no-rename完成
+即将把 %.250s 从 %.250s 降级到 %.250sdpkg 数据库锁dpkg 前端锁记录中显示，dpkg 没有被安装，因而不能断定它是否支持 %s！
+重复的待命触发包 %.255s 文件 %.250s 和软件包 %.250s 有重复的文件触发关注重复路径 %s重复的未决触发器 %.255s 重复的次要链接 %s重复的次要名称 %s有多个值对应于字段 %s 有多个值对应于用户自定义字段 %.*s 档案详情 '%s' 字段为空空字段名通过 fgets 读取 conffile 时，返回了空字符串触发器名不能为空'%s' 字段值为空在字段名 %.*s 后有 EOF在字段 %.*s 的值的前面有 EOF (缺失结尾的换行符)在字段 %.*s 的值中间发有 EOF 字符(缺失结尾的换行符)在 conffile 提示时读取标准输入时遭遇 EOF版次版本中的版次为空版本中的版次为负数版本中的版次不是数字版本中的版次过大错误检查 %s 时出错关闭 %.250s 出错关闭配置文件 %.255s 时出错关闭/写入 %.255s 出错新建设备文件 %.255s 时出错新建目录 %.255s 时出错新建硬链接 %.255s 时出错新建备份文件 '%s' 时出错新建管道 %.255s 时出错新建符号链接 %.255s 时出错在确保文件 %.250s 不存在时出错执行钩子 %s 出错，退出状态为 %d将字符串格式化为 varbuf 变量时出错显示格式有误：%s安装新文件 '%s' 时出错打开 conffile 文件时出错打开配置目录 %s 时出错处理归档 %s (--%s)时出错：
+ %s处理软件包 %s (--%s)时出错：
+ %s读取 %.250s 时出错无法从文件 %2$s 读取 %1$s读取 conffile 文件时出错从 dpkg-deb 管道读取错误读取触发推迟文件 %.250s 出错删除旧备份文件 '%s' 时出错为 %.255s 设置属主时出错为符号链接 %.255s 设置属主时出错为 %.255s 设置权限位时出错为 %.255s 设置时间戳时出错试图打开 %.250s 出错复原 %s 信号行为出错：%s
+清理时出错写入 %s 时发生错误%s 写入错误写入 %s 出错写入体系结构列表时出错在 conffile 提示输入前写标准错误出错分配内存失败在无法处理的软件包列表中添加条目时，申请表项所需的内存失败：%schdir 到 %.255s 失败chdir 到目录失败无法 chroot 到 %.250s 目录读取 %.255s 后无法关闭新建目录失败无法建立管道无法 dup 文件描述符 %d无法 dup std%sfstat ar 成员文件失败 (%s)在包文件上执行 fstat 失败无法 fstat 转移文件无法 fstat statoverride 文件新建临时文件(%s)失败无法打开配置文件 %.255s 以便读取：%s无法打开转移文件无法打开软件包的 info 文件 %.255s 以便读取无法打开 statoverride 文件无法打开触发关注列表文件 %.250s读取失败读取 %.255s (于 %.255s 目录)失败读取归档 %.255s 失败删除合并后的更新文件 %.255s 失败删除自身的更新文件 %.255s 时失败返回临时文件(%s)的起始位置失败返回触发关注文件 %.250s 起始位置失败重定位文件读写偏移失败获取现有的符号链接 %.250s 的状态(反引用)失败获取建议的新符号链接 %.250s 的状态失败，它将替代符号链接 %.250s获取临时文件状态失败(%s)unlink 临时文件(%s)失败，%s写入失败将关于 %2$.50s 的 %1$s 数据库记录写入 %3$.250s 时失败将 %.50s 的详情写入至 %.250s 时失败写入文件名到 tar 管道 (%s) 失败fgets 从 %.250s 取回了一个空字符串字段名 '%.*s' 不能以连字符开头字段名 %.*s 后必须跟冒号字段宽度超出范围文件 %.250s 的格式版本无效：%s文件 %.250s 已经损毁 - 无法找到 %.250s文件 %.250s 已经损毁 - MD5 校验和 %.250s 不符文件 %.250s 损毁 - 归档头部魔数无效文件 %.250s 已经损毁 - 归档分块编号有误文件 %1$.250s 已损毁 - 在 %3$s 中有无效数字(即 %2$d)文件 %.250s 已损毁 - 在第一个文件头末尾有错误的魔数(magic)文件 %.250s 已经损毁 - 在第二个文件头尾部的魔数有误文件 %.250s 已经损毁 - 归档分块数量有误文件 %.250s 已经损毁 - 错误的补齐字符(其代码为 %d)文件 %.250s 已经损毁 - 在 %.250s 后没有发现换行符文件 %.250s 已经损毁 - 在归档分块编号之间没有发现斜杠文件 %.250s 已经损毁 - info 小节中发现了空字符(null)文件 %.250s 已经损毁 - 第二个成员不是数据成员文件 %.250s 已经损毁 - 标称分块编号的长度有误文件 %.250s 已经损毁 - 文件过小文件 %.250s 已经损毁 - 标称大小的分块的数量有误文件 %.250s 格式的版本是 %d.%d；您需要用更新版本的 dpkg-split 来处理它文件 %.250s 不是 Debian 的二进制包文件(不妨尝试 dpkg-split?)文件 %.250s 并非一个包文件的分块文件文件 %s 已损毁；在 %s 中有无效整数文件 %s  不是一个包文件的分块文件
+文件格式无法识别该文件看上去似乎原本是一个包文件，但是由于下载它时
+ 使用的是 ASCII 模式，从而导致了包文件被损坏文件不可以含有换行符文件触发记录有提到非法的软件包名 %.250s (用于文件 %.250s 的触发关注)：%.250s文件名 "%s" 并不是绝对的文件 %.250s 和 %.250s 并不同属一个包文件的分块文件软件包 %.250s 的文件列表含有空的文件名软件包 %.250s 的文件列表缺少最后结尾的换行符无法找到软件包 %.250s 的文件列表，现假定目前该软件包没有任何文件被安装在系统里。'%s' 字段的第一个 (want) 词: %s链接组 %2$s 已损坏，故强制重新安装候选项 %1$sfork 失败格式版本含有多余成分格式版本没有点号格式版本格式版本的主版本部分为空格式版本的次版本部分为空格式版本的主版本部分过大格式版本的次版本部分过大发现未知的软件包；这可能意味着可用的数据库已过期，
+需要使用前端的方法进行更新；详见FAQ <https://wiki.debian.org/Teams/Dpkg/FAQ>为 '%s' 生成的 ar 头部损坏用户组 '%s' 不存在有无效值 '%.50s'有多余成分尾随头部过长，导致分块过长；一定是软件包的名称或者版本号
+相当之长，或者别的什么；放弃操作忽略有关 control 文件的 %d 个警告忽视软件包间的破坏，无论如何继续安装！忽视软件包间的冲突，无论如何继续安装！忽略 %s 的依赖关系问题：
+%s忽略预依赖问题！忽略删除 %.250s 的要求，系统没有安装该软件包忽略卸载 %.250s 的要求，系统中仅存在其配置文件；
+可使用 --purge 来把这些配置文件一并删除在说明符 '%s:%s' 中有非法体系结构名: %s非法的等待软件包名 %.250s :%.250s在第 %d 行发现非法的软件包名：%.250s在等待触发器 %.255s 中包含非法的软件包名：%s在说明符 '%s%s%s' 中包含非法软件包名: %s非法的未决触发器名 %.255s ：%s信息数据库格式(%d)是伪造的或者太新；建议尝试新版本的 dpkginfo 文件 %s/%s 与任何软件包都无关安装 %.250s已安装已安装 %s 软件包 %s 脚本安装 %.250s 将破坏 %.250s，并且
+不允许反配置(--auto-deconfigure 也许会有帮助)安装 %.250s 将破坏现有软件内部错误内部错误 (bug)归档 %2$.250s 成员 %3$.16s 的尺寸中有无效字符 '%1$c'字段宽度中有无效的字符 %c修订号含无效字符版本号含无效字符无效的压缩等级 -%c：%ld无效的压缩参数：%s无效的 deb 格式版本：%s无效的整型参数 -%c：%.250s--%s 接受到无效的整数： %.250s触发器名 %.250s 包含无效或者未知的语法（位于触发关注软件包 %.250s）无效的软件包名 %.250s 出现于触发推迟文件 %.250s无效的软件包名存在于 '%s' 字段: %s无效的 statoverride 组ID(gid) %s无效的 statoverride 权限位(mode) %s无效的 statoverride 用户ID(uid) %s无效状态tar 头部校验和无效tar 头部的校验和字段无效tar 头部的 gid 字段无效tar 头部的 mtime 字段无效tar 头部的尺寸字段无效tar 头部的 uid 字段无效无效的 tar 头部，名称字段为空无效的触发器名 %.250s :%.250s缺少一个值尝试读取 %s 时行未结束尝试读取 %s 时行过长或没有结束链接 %s 同时是主要和次要正在读取软件包 '%2$s' 的 '%1$s' 控制文件正在载入软件包 %s 的文件列表本地转移自：%s
+本地转移至：%s本地转移 %s 到 %s本地转移至：%s
+本地转移至：%s
+长文件名维护者的脚本 %.50s 的权限位是 %03lo (必须 >=0555 且 <=0775)维护者的脚本 %.50s 不是普通文件或符号链接无法获取维护者的脚本文件 %.50s 的状态malloc 失败 (%zu 字节)手动模式主文件主链接也许卸载 %s 会有问题，因为它提供了 %s ...不能为空字符串已达到内存使用上限在删除 %s 时
+  转移目标名不匹配
+  发现了 %s 删除 %s 时
+  软件包名不匹配
+  发现了 %s 缺失 '%s' 字段缺少右大括号现有多个混合的‘不可共存’和‘可共存’的软件包实例；很有可能是因为从非官方 dpkg 进行过升级多体系结构多个冲突和替换现有多个不可共存的软件包实例；很有可能是因为从非官方 dpkg 进行过升级存在多个 statoverride 用于文件  %.250s必须从维护者脚本中调用(或者通过 --by-package 选项)必须以字母或数字开头必须以字母或数字开头文件名 %s 同时是主要和次要需要一个指示操作的选项新的 %s 软件包 %s 脚本在字段名 %.*s 中有换行符归档对象名称 “%.255s” 中不允许换行路径名 “%s” 不允许换行符update-alternatives 文件(%s)禁止换行符在 control 归档中没有发现 “control” 文件！无 %s 的候选项override 不存在在 %.255s 中没有软件包的相关信息您未曾安装名为 %s 的软件包，因而不能对它进行配置没有找到与 %s 相匹配的软件包没有找到与 %s 相匹配的路径拒绝，%s 是基础软件包，不能反配置该软件包
+ 以启用 %s拒绝，不能继续进行 %s (不妨尝试 --auto-deconfigure)：
+%s不检查控制区域的内容没有足够权限通过 --force-not-root 改变根目录，考虑用 --force-script-chrootless ?未安装未安装，但是其配置文件仍存留于系统中鉴于 %s 不是符号链接，将不移除它将不会把 %s 替换为链接版本号的冒号后面没有任何东西在 --%s 逗号分隔的列表 %.250s 中有空的软件包名归档分块的数量使用了废弃字段 '%s'废弃的 --%s 选项；现在不可用软件包将被自动清理。废弃的压缩类型 %s；请用 xz 代替废弃的压缩类型 %s； 用 xz 或 gzip 代替废弃的强制或拒绝选项 '%s'废弃的选项 ’--%s‘旧的 %s 软件包 %s 脚本原有 conffile  %.250s 是一个空目录(现在已被删除)旧文件 %.250s 与多个新文件相同！( %.250s 和 %.250s )原先版本的软件包中有一个信息文件的文件名太长，文件名是以 %.250s 开头的'%s' 字段中只能指明确切版本打开组件 %.255s (于 %.255s 目录)出乎意料地失败内存不足，无法新建清理条目内存不足，建立清理条目的参数过多内存不足，无法新建错误上下文处于错误上下文之外，中止由于开启了 --force 选项，以下问题被忽略：您已经安装并配置了软件包 %.250s现在尚不能配置软件包 %.250s
+ 不能配置(目前状态为 %.250s )软件包 %.250s 尚未准备好由触发器处理
+ (目前状态为 %.250s，没有未决的触发)现在尚不能配置软件包 %s %s，因为 %s 处于一个不同的版本(%s)含有字段 '%3$s: %4$s' 的软件包 %1$s (%2$s) 不能与存在多个已安装实例的 %5$s 共存现在尚不能配置软件包 %s，因为 %s 未准备好(目前状态为 %s )软件包 %s 把一个列表作为信息文件使用尽管软件包 %s 需要重新安装，但还是将遵照您的要求将其卸载软件包 %s 需要重新安装，它不会被卸载。软件包 %s 本来被要求保持原来的版本，但还是如您所愿，继续对它进行操作软件包 %s 现在不可用软件包 %s 没有被安装系统没有安装软件包 %s，因而没有相关的信息软件包体系结构软件包体系结构(%s)与本机系统体系结构(%s)不符软件包体系结构缺失或为空软件包中有一个主控信息文件的文件名太长(该文件名是以 %.250s 开头的)软件包的主控信息含有一个目录 %.250s软件包控制信息，rmdir  %.250s 也没有说这不是一个目录软件包 control 信息抽取软件包将其他的包转移至：%s
+软件包字段值提取软件包文件 MD5 校验和软件包文件系统归档提取软件包有 '%s' 字段，但体系结构为 “%s”软件包有 '%s' 字段，但缺失体系结构软件包处于 %s 状态，并且拥有配置文件，将会忽略它们软件包处于 %s 状态，但没有触发器在等待软件包处于 %s 状态，但是没有触发器处于未决状态软件包处于 %s 状态，但触发器在等待软件包处于 %s 状态，但是触发器处于未决状态该软件包现在的状态极为不妥；
+建议您在卸载它之前再重新安装一次该软件包正处于非常不稳定的状态；
+您最好在配置它之前，先重新安装它软件包不可以含有换行符软件包名软件包名 %s 无效: %s软件包的名字含有不是小写字母或 -+ 的字符第 %d 行的软件包在状态数据库和可用包数据库中均查询无果：%.250s软件包签名验证软件包版本号用于显示文件的分页器在解析文件 '%.255s' 第 %d 行附近时：在解析文件 '%s' 第 %d 行附近，软件包 '%s' 时：缺少第 %d 个分块分块文件 %.250s 不是一个普通文件分块文件的大小已远远超长或者不是正数分块文件的大小必须大于 %d KiB (为了容下文件头)部分读取的 tar 头部验证通过
+粘贴路径不可以含有换行符请显式指定 --no-rename ，默认选项将会在 1.20.x 版本中变为 --rename预依赖问题 - 将不安装%.250s优先级优先级超出范围优先级必须为整数%s 的优先级无效：%s%s 的优先级：%s四值状态 (foreign/allowed/same/no) '%s' 字段: %s读取 %.250s 出错读取 %.250s 出错读取配置文件 %.255s 时出错从标准输入读取数据时出错在 conffile 提示输入时读取标准输入出错正在读取软件包 info 文件 '%.255s'正在读取软件包 info 文件 '%s': %s读取 statoverride 文件 '%.250s'重新组装成的软件包文件对于含 %2$s 的文件 %1$s ，有预依赖问题：
+%3$s关于含有 %2$s 的 %1$s：
+%3$s卸载 %.250s将要移除的体系结构 %s ，当前仍被数据库使用正在移除手动选择的候选项 - 切换 %s 到自动模式更改  %2$s  文件名会覆盖  %1$s，
+  不允许此操作重命名：移除重复的旧连接 %s所请求的操作需要超级用户权限需要对于 dpkg 数据库目录 %s 的读/写权限需要对于 dpkg 数据库目录 '%s' 的写权限以进行批量的可用更新版本号为空用于清理的 rm 命令根目录或空目录被列为一个 '%s' 字段中的配置文件已搜索包文件，但是没有发现任何软件包(即与 *.deb 匹配的文件)'%s' 字段的第二个 (error) 词: %s<未知>正在设置 %s 的自动选择发现了多个软件包的 info 条目，但只允许一个shell 命令来移动文件在分页器中显示软件包列表跳过创建 %s 因为所关联文件 %s (位于链接组 %s)不存在从文件次要链接次要链接与主链接 %s 相同次要名称原始文件 %.250s 不是普通文件重组并分割软件包statoverride 文件含有空行statoverride 文件结尾处缺失换行符状态状态日志记录器移除后面的 /子进程 %s 返回错误状态 %d符号链接 '%.250s' 尺寸从 %jd 变更至 %zd文件触发文件 %.250s 有语法错误statoverride 文件中有语法错误触发推迟文件 '%.250s' 中有语法错误，位于第 %d 行，字符 %zd '%s'只接受一个参数，触发器名目标是目录 - 无法忽略 control 文件的检查步骤第 %d 个分块文件有多个版本 - 其中至少有 %.250s 和 %.250s 两个新版本的软件包里没有脚本 - 取消操作'%s' 字段的第三个 (status) 词: %s这是一个至关重要的软件包；您不应当把它卸载。要恢复成自动更新请执行 %s --auto %s。档案详情 %s 字段的值过少(和其他的相比)出现过多错误，正在停止在错误恢复过程中发生了过多的嵌套错误档案详情 '%s' 字段的值过多(和其他的相比)文件 %.250s 中的行太长，或者缺少换行符treewalk 的根节点 %s 不是一个目录触发关注文件 %.250s 语法错误；非法的软件包名 %.250s ：%.250s触发器名 %s 无效: %s触发器名包含无效字符触发器记录尚不存在已触发触发器配置项文件`%.250s'在触发器名 %.250s 中包含非法触发器语法：%.250s触发器 ci 文件包含位置指令 %.250s触发器 ci 文件包含位置指令语法尚未创建触发器数据目录触发器数据库锁触发器循环，放弃现在尝试使用新软件包所带的脚本...正试图覆盖 %.250s，它同时被包含于软件包 %.250s %.250s正在尝试覆盖 %.250s，它是 %.250s 的转移版本正在尝试覆盖 %.250s，它是 %.250s 的转移版本(软件包：%.100s)正试图用一个非目录的文件替换目录 %.250s，该目录属于软件包 %.250s %.250s尝试覆盖共享的 '%.250s', 它与软件包 %.250s 中的其他实例不同指定了两个命令：--%s 和 --%s无法(重新)打开作为输入的分块文件 %.250s无法访问 dpkg 数据库目录 '%s' 以进行批量的可用更新无法访问 dpkg 数据库目录 %s无法改变目标文件 %.250s 的所有者无法判断 %.250s 是否存在无法检查文件 %s 的锁状态 无法判断包文件 %.250s 存在与否无法检查 dpkg 数据库目录 '%s' 的锁文件无法更改 %.255s 的符号链接备份的属主在安装另一版本前，无法清理 %.255s 的临时文件无法关闭文件 %s无法关闭新文件 '%.250s'无法关闭新的触发推迟文件 %.250s无法关闭 %.250s 的新状态无法创建 %.255s无法创建 %.255s (处理 %.255s 时)无法创建文件 %s无法新建文件 '%.250s'无法创建临时目录无法创建触发器状态目录 %.250s无法删除控制信息文件 %.250s无法删除原有的目录 %.250s ：%s无法删除用毕的存储文件 %.250s无法忽略 %.250s无法执行 %s (%s)无法补齐 %.250s无法在补齐后清空 %.250s无法清空文件 %s无法清空新文件 %.250s无法刷新 %.250s 的新状态无法 fstat 原始文件无法同步 %.250s 的新状态无法获得目录 '%s' 的文件描述符无法在运行 %2$.250s 之前忽略信号 %1$s无法将 %.250s 安装到 %.250s无法安装文件 %.250s，该文件被认定是新的信息文件无法把新的信息文件 %.250s 安装到 %.250s无法安装新的触发推迟文件 %.250s无法安装 %.255s 的新版本无法安装 %.250s 的新状态无法锁定 %s无法在安装新的版本前，为 %.255s 做一个符号链接备份无法为 %.255s 做一个符号链接备份无法将 %.255s 改名，以安装新的版本无法打开 %.255s无法打开目录 '%s'无法打开文件 %s无法打开新的存储文件 %.250s无法打开输出文件 %.250s无法打开原始文件 %.250s无法打开临时的 control 目录无法打开触发器 ci 文件 %.250s无法打开触发推迟文件 %.250s无法为目录 '%s' 打开或创建 dpkg 锁文件无法为目录 '%s' 打开或创建 dpkg 前端锁无法打开/创建新的触发推迟文件 %.250s无法打开或创建触发器锁文件 '%.250s'无法解析时间戳 '%.255s'无法读取用于存放文件的目录 %.250s无法读取文件触发文件 %.250s无法读取 %.250s 的 filedescriptor 标志位无法读取符号链接 %.255s无法读取分块文件 %.250s无法移除 %s无法删除 %.250s 的备份版本无法删除源码文件副本 %s无法删除 %.250s 的新近解压的版本无法删除 %.250s 的新近安装的版本无法把新近安装的 %.250s 卸载，以允许安装备份无法删除废弃不用的信息文件 %.250s无法将新的存储文件 %.250s 重命名为 %.250s无法打开分块文件 %.250s无法恢复 %.250s 的备份版本无法安全地卸载 %.250s无法安全删除 %.255s 无法安全地删除旧的文件 %.250s ：%s补齐后无法找到 %.250s 的起始位置无法为数据库文件 %s 设置缓冲区无法设置 %.250s 的 close-on-exec 标志位无法设置 %s 的执行权限位无法设置文件 %.250s 的权限位无法为维护脚本设置环境变量无法为子进程设置环境变量无法获取 %s  %.250s 的状态无法获取 %s  %.250s 的状态：%s无法获取 %.250s 的信息无法获取 '%.255s' 的状态（正准备安装该文件）无法获得 control 目录信息无法获取当前已安装的 conffile %.250s 的信息无法获取新发布版的 conffile %.250s无法获取其它新文件 %.250s 的信息在安装另一版本前，无法获取恢复后的 %.255s 的状态无法获取源文件 %.250s 的状态无法获取触发推迟文件 %.250s 的状态无法同步目录 '%s'无法同步文件 %.255s无法同步文件 %s无法同步新文件 %.250s无法截断 %.250s 的新状态无法解锁 %s无法写入文件 %s无法写入新文件 %.250s无法写入新的触发推迟文件 %.250s无法写入状态文件描述符 %d无法写入 %.250s 的新状态%s 中引号不闭合未预料的 bzip2 错误在第 %d 行的软件包和用户选择后有发现了数据，这出乎我们的意料在第 %d 行的软件包名后遭遇未预期的文件结束在第 %d 行还未结束时，遭遇未预料的文件结束在 %2$.255s 中读取 %1$s 时遇到意料之外的文件结束符在第 %d 行的软件包名中遭遇未预期的文件结束未预期的文件结束或流结束读取 %.250s 时遭遇未预期的文件结束符在读取 %s 时遇到非预期的文件结束符未预期的输入结束在第 %d 行的软件包名后发现该行在此结束，这出乎我们的意料在第 %d 行的软件包名中遭遇未预期的行结束statoverride 文件有非预期的行结束符未预期的已存在路径 %s无法识别的参数 %s 未知的压缩策略无法识别的压缩策略 %s ！无法识别的压缩类型 %s ！未知的 deb 格式版本：%s无法识别的 force/refuse 选项 %.*s 未知选项 %s未知选项 -%c未知选项 --%s在 stateoverride 文件中发现未知的系统组 '%s'；该系统组在重载之前被移除。
+这很有可能是一个打包Bug。您可以通过 %s 手动移除重载来进行恢复在 stateoverride 文件中发现未知的系统用户 '%s'；该系统用户在重载之前被移除。
+这很有可能是一个打包Bug。您可以通过 %s 手动移除重载来进行恢复未知的 tar 头部类型 '%c'未知的核对输出格式 %s 在第 %d 行发现无法识别的状态：%.250s已解压，但尚未配置无法恢复的致命错误，中止不支持的 GNU tar 头部类型 '%c'不支持的 PAX tar 头部类型 '%c'不支持的 Solaris tar 头部类型 ‘%c'不支持的压缩预设不支持均匀压缩的压缩类型 %s不支持的文件头选项不支持的完整性检验类型更新目录中包含文件 %.250s，其文件名过长（长度为 %d，最大为 %d）更新目录中的文件长度名称不一致（分别为 %d 和 %d）链接组 %2$s 已更改次要链接，故更新候选项 %1$s用户 '%s' 不存在用户自定字段名 %.*s 过短使用 %1$s 来在自动模式中提供 %2$s (%3$s)使用 %1$s 来在手动模式中提供 %2$s (%3$s)'%s' 字段的值有以非空格字符 '%c' 开头的行'%s' 字段的值有行格式有误: '%.*s'此处不允许 '%s' 字段的值软件包 %s 没有通过验证！虽然软件包 %s 验证失败；但还是如您所愿继续安装它<无>%1$.250s 的 %2$.250s 版本已经安装，因而将跳过它版本号 '%s' 语法错误版本号 '%s' 语法错误: %s版本号没有以数字开头版本号为空版本号里嵌有空格字符版本号为空填实等待 %s 子进程失败等待子进程 %s 失败警告当读取 %s 时：%s卸载 %.250s 时，目录 %.250s 非空，因而不会删除该目录当卸载 %.250s 时，无法删掉目录 %.250s ：%s - 它会不会是一个挂载点呢？不会将 %.250s 从 %.250s 降级到 %.250s，因而将跳过它 '%s' 字段中的文字: %s好的，将反配置 %s (被 %s 破坏)。好的，为了 %2$s 而卸载 %1$s您没有锁定 dpkg 数据库目录 '%s' 的权限您必须通过软件包自身的名字来指定软件包，而不是直接引用软件包文件的文件名
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/po/zh_TW.gmo dpkg-1.20.7.1/po/zh_TW.gmo
--- dpkg-1.20.7.1-orig/po/zh_TW.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/po/zh_TW.gmo	2021-06-09 18:25:16.204505336 -0500
@@ -0,0 +1,704 @@
+������;�O?�Oa�OkCP��P�wQ&�Q=R&]R�R-�S.�S�S.T5T QT4rT�T5�T-�T.'U0VU1�U$�U4�U/VCVq[V(�V$�VW;W:[W6�W1�W1�W!1X2SX(�X�X�X!�X�XY1YBY.QY�YS�Y�Y�YZ9(ZmbZ)�Z:�Z95[.o['�[&�[�[3\57\m\s\P�\\�\v.][�]U^W^l^}^�^�^Z�^	__�)_=�_3`H`-Y`+�`�`)�`�`�
+a=�bR$c1wcD�cL�cA;d'}d&�d(�d'�d+e4Ie!~e,�e9�e-f5f#Sfwf$�f�f"�f�f!g#;g_gtg�g�g�g"�g2�g1&h/Xh'�h�h.�h�h-iR?iH�iQ�iA-jeojf�jI<k7�k<�k�k(lB7lzl�l�l
�l �l�l5m1=m0om�m�m#�m!�mn.nKKn7�n5�n-o3o!Mooo'�o-�o-�o 
p5.pdp �p�p"�p!�p"q!%q$Gq,lq.�q.�q�qHr6`r(�r>�r$�r $sEsdsksws��s8t#Et:it-�u�u�u�uv*v<>v#{v-�v-�v��v�w�w��w[�x�yg}
i~w��(��-р��8�<T�.����0ׁ3�1<�n�{������1W�*��J��2���2�&ׅ2��E1�Vw�Ά5�.�-L�+z�/��
և%�/
+�*:�&e�!��+��Bڈ]�{�!��M����2��9���!}�"��4�.�5E�3{���G��8�,@�m�(������̓G�0�39�)m�$��:��,��V$� {���*�����&�-/�+]�,��	����֖*��/� L�Hm���������gA�j������4��5��(������ug�&ݞA�{F�!,�*�.<�k������ ��5��,�$�.;�*j�;��,ѣ�����u���7���(�95�(o�X��3�?%�8e�2��1ѧ,�:0�4k�5��4֨A�MM�-��ɩݩ#���8�L� c�1��8��6�&�&B�.i�!��!��5ܫ�/�E�Z�n���	��9��.ڬ#	�,-�Z�y�%����%ޭ-�12�d�z�)��1î&���=9�7w�!��.ѯ*�"+�&N�u�����@°+�;/�3k�����Aױ�&8�-_�0��(��?�)'�-Q�"�����4ҳE�M�,h�"��!��ڴ5�� /�P�_�-~�5��,�B�BR�+��G��$	� .�O�h�&w���7���D�cU���*Ÿ"�3�-G�&u�����ι�"�#�:�(@�=i�*��JҺ�"/�R�j���-��)ϻ%��#�@C�@��ż˼��!�=�C�W�)l�����!Խ!��#�<�%Y�%�'��,;���2�*O�z�!���� ο-�#�#A�+e�%��$���� ���1�J�]�"s�:����F��2�N�k�$����������#�2�J�!j�"��:����5	� ?�2`���%����0��*�$D�/i���6��V��"6�(Y���<��.��)��((�+Q�}�,��)��4��3%�2Y�4��;��<��6:�:q�7��@��0%�;V�?��$��A��=9�$w�0��!����b
+�m�c����:
�<H�=��_��H#�l�x�����)��)��+�+H�$t����\�&z�&��'�� ��7�tI�2��-��'�4G�.|�)����	��k��/b�����>��%��$�#@�&d�!����!��"��^�@p���%��+��7�!J�l�����������O��8H�*����������3���6�7Q�5����|��
+R�]�m}�0��G�d�)��!������5�%9�_�v�"��4����!�C"�=f�%��
�� ��(��"�%?�7e���I��.��6.�e�G|�P��G�.]�?��#��7��#(�L�+l�2��Y��f%�L��M��&'�KN�3��=���*�=H���4��F��1�;I�&��������%�.*�.Y� ����D�����1�&D�-k�7������.����0�"L�o�����)����&��"�"?�"b���6������7�B>�H��&��0��"�;�6R���$��4����O�
+a�
+l�w�
+��%����%��*�2�
9�G�+\�7��+��!��M�$\�4��F��@��1>�p�,��,��#��R�'[�$��	��Z��4
�2B�'u���.��D��G-�Yu�Q��^!�%��+��2��%�%+�1Q�+��N����!�3:�*n���5����"�$'�2L�+�+��,����"9�$\���!��*����*�0/�0`�&��3��4��5!�)W�,����D��*�40�e�}���&��#��#��%#�(I�.r�9��'��*�..�]�!z���(��(��4�49�[n�,��4��#,�,P�"}�"��/��/��+#�+O�-{�*��&��!���8�W� o�2��0��&��B#^.���� 1&Xl!�3��*�'A6X&� �.�41S+���"�&"Eh|�(��#�:+"f#�S�MEO�(�(�*.+0Z"�I��4<X(x�"���	0	8	BM	`�	9�	'+
+#S
+`w
+��
+9_S�X��F
j#'�<�,�� .	,8e5|�#�5�):C8~0�2�2-N8|/��y(|���<�04/e3�$�C�!2T"i#�����2
@%Qw'��<��-�<�668*o0��)�5>DjPs�<//l%�����j����6w��K�.L&e�4�A�\ -m ;� V� G.!*v!)�!$�!#�!9"4N"�"+�"+�"5�"-#$K#p#$�#�##�#�#!$#.$R$i$$�$"�$&�$1�$>)%'h%2�%�%.�%
+&1&JQ&S�&V�&HG'b�'^�'GR(5�(<�(
))")DL)�)�)�)
�)�)*0#*5T*2�*�*�*)�*+9+U+Km+7�+2�+/$,T,l,�, �,,�,2�,)-1G-y-�-�-)�-)�-)."B.#e.(�.1�.&�.(/N4/6�/)�/D�/)0F0c0w0
~0�0��0>1"J14m1)�2�2�2�2�23/"3R3-n3-�3q�3<4I4X4_o5.�5��9"�;��<�=,�=*�=!>8.>5g>-�>�>0�>*?5??u?�?�?��?-�@�@V�@8+A6dA�B1�B>�B)(CRC*qC*�C �C!�C1
+D<D!LD,nD�D!�D$�D9�DQ8E[�E�E*�ELFeF?uF��F�[Hi$J�N�N-�N<�N9+O,eO�OR�O8�O&0PWP0tP�P�P�PH�P	%QK/Q*{Q%�Q%�Q(�Q)R(ERnR�R�R�R�R#�R.S%/SUS\SuS'�S�S!�S�S&T/T�6T��TD�UG�U�V��V"jW1�W��W�_X�Y7�Y�Y;�Y�-Z�Z2�Z!['?[ g[��[�]+�]<�]&^%-^?S^.�^4�^.�^�&_�_d�_�$`
+�`
+aa7 a&XaZa>�aGbNab2�b5�b c9:c>tc,�c>�c<dE\d*�d�d�d-�d,*eWe]e"fe*�e7�e3�e f <f0]f$�f�f0�fgg,g<gLg\grg-g*�g#�g'�g"$hGh'fh#�h7�h7�h/"iRi$di(�i4�i/�i(j>@j<j!�j.�j%
k*3k*^k�k�k�k6�k&l?5l5ul!�l#�lC�l5m!Qm4sm5�m/�mSn*bn,�n7�n'�n#o/>oFno�o*�o'�o p<p-Xp�p�p�p/�p7q"9q8\q8�q&�qI�q?r^rsr�r$�r�rE�r$s@@sG�s�s�s�s't09t)jt�t�t�t�t'�tu,u&4u:[u3�u>�u	v'vDvav!~v1�v5�v$w;-wYiwR�wx"#xFxcx�x�x�x �x(�x)
+y+4y(`y.�y#�y1�y.z4=z2rz8�z�z�z%{':{ b{$�{%�{:�{9	|#C|.g|:�|+�|1�|&/}*V}�}�}�}�}*�}<�}8~AN~�~�~�~ �~�~+?>S.�+�� �*,�W�.m���$��߀*�!�(9�%b�)��.���L��hD�0��%ނ�B�0T�1��+��,��*)�)T�3~�4��1�M�Ug�@��1��C0�<t�7��3�:�4X�%��@��?�%4�0Z�"����@ǈ�s'���A��1��4+�R`�>������8�E�a�$}�$��ǋ^�%E�'k�$����،/�g$�A��0΍.��K.�<z�4����f�)w�����Z��&�!C�e� ������ې(��Y#�H}�Ƒ0ӑ�($�"M�p�������	ؒO�92�-l� ����	ȓ	ғ2ܓ�%�;;�5w����ÔH�X�cn�-ҕ;�<�U�"n��� ��9Ŗ7��7�N�+g�0��ė�J��=I���	��$��$Ҙ��$�C6�z�A��2̙>��%>�7d�F��B�2&�OY�0��9ڛ0�'E�*m�&��F��l�9s�N��(��I%�+o�:��֞�-�2�6E�H|�0şH��?�!X�z���$��1ʠ1��!.�P�7]�������%ϡ-��@#�d�l�(s�	����¢ ۢ�� �2�O�*o�8��ӣ+� �?�5[�"����0ˤ7��V4�,��$��ݥ�=�D�M�9g���A����()�R�%e�����"��ۧ��+�10�0b���V��'�0/�G`�1��6ک�--�7[�<��UЪ0&�W�	m�cw�4۫1�B�*a�#��?��:�N+�Qz�M̭(�?C�.��"��'ծ+��+)�@U�����3ͯ%�'�/@�p�����-ð$�#�':�b�x�����'˱*�%�+D�8p�'��0Ѳ%�3(�4\�3��"ų%��I�.h�.��ƴܴ��$�1�P�!o�(��-��<�!%�&G�,n�!����ܶ"�(�(:�(c�L��'ٷ:�$<�(a�����&¸2�)�(F�%o�+��*��$�(�-:�%h�'��=��:��1/�La�.��6ݻ'�+<�'h�+��%������3,�`�%����ĽCڽ=�!\�~���7��:�"$�G�Y�l���%��$̿���.,�[�*z���4����!�\(�I��N���&6�0]�0��6��5��,�@L���'��#��(���$�7�V�i�������?��L�5M�/�� ��K�����e�Z������mX��L��.J�Ty������cx�ui[`�z9����f�����:�����{m�4l<O����+UUs����4Iq%��� ���s��6m�:���AY�������;���Y���6����nnh�P��B�Zi|&��q�r
���~C��a���
+��M���]��t.{g�?[�H�w^��5c2��Q��G�7�,��&�w\KD�*[���X���#v�<�{�Q��f�����|����zM?oB2���8��E���l'��pCo��;��y��/B�o)H~Uj�$l�R7�k�����V>�'}��B��5x�M���%��!�1�V��.����T��#A<�2e�0����Fj���K����EP����|�_��h3�;dQ�0wH>�&���=Iv?��t����+r>�]���`a�	��y"9���L����t�� ��3\�u��J;G�=�
"$�h��^j������V���P��2@����@���)R�8t������>��*�s��WI](}�odS��L"�Q*i(�?J�'��F�3b	[���U�������_p��@�NaF�$Ak���l^��L~)v/5�N�8+&�<
+!c��D��+�
+�b3M)#��	\�p\�(m�Pi�������f4$w7h�����:S7V�zgx��-�k�����ZH����C�e��`�9�d%%}F��E�s�*�g�S�.�n_(-rR�6Y�_e�T��~���! �{�@R�}dWJ�aZ8K�`:�������� q��Eb�
+x�1�-^�z��O���0O�
�jq���IW��6/���f5c,��k��WN�K,��"=S�rX��	�����!G�v�/�T�G��|�1��D�
�]4�y�ND�����1��0�p'n��C����-=A�bu���9Y����#gX,�uO���
+ packages' pending triggers which are or may be unresolvable:
+
+Configuration file '%s', does not exist on system.
+Installing new config file as you requested.
+
+Debugging options can be mixed using bitwise-or.
+Note that the meanings and values are subject to change.
+
+Use 'dpkg' to install and remove packages from your system, or
+'apt' or 'aptitude' for user-friendly package management. Packages
+unpacked using 'dpkg-deb --extract' will be incorrectly installed !
+
+WARNING - use of options marked [!] can seriously damage your installation.
+Forcing options marked [*] are enabled by default.
+     Not modified since installation.
+     Version in package is the same as at last installation.
+     not a plain file          %.255s
+   What would you like to do about it ?  Your options are:
+    Y or I  : install the package maintainer's version
+    N or O  : keep your currently-installed version
+      D     : show the differences between the versions
+      Z     : start a shell to examine the situation
+  %.250s (version %.250s) is present and %s.
+  %.250s (version %.250s) is to be installed.
+  %.250s is %s.
+  %.250s is installed, but is version %.250s.
+  %.250s is not installed.
+  %.250s is to be deconfigured.
+  %.250s is to be installed, but is version %.250s.
+  %.250s is to be removed.
+  %.250s is unpacked, but has never been configured.
+  %.250s is unpacked, but is version %.250s.
+  %.250s latest configured version is %.250s.
+  %.250s provides %.250s and is present and %s.
+  %.250s provides %.250s and is to be installed.
+  %.250s provides %.250s but is %s.
+  %.250s provides %.250s but is to be deconfigured.
+  %.250s provides %.250s but is to be removed.
+  %s (%s) provides %s.
+  -?, --help                       Show this help message.
+      --version                    Show the version.
+
+  Package %s awaits trigger processing.
+  Package %s is not configured yet.
+  Package %s is not installed.
+  Package %s is to be removed.
+  Package %s which provides %s awaits trigger processing.
+  Package %s which provides %s is not configured yet.
+  Package %s which provides %s is not installed.
+  Package %s which provides %s is to be removed.
+  Version of %s on system is %s.
+  Version of %s on system, provided by %s, is %s.
+  Version of %s to be configured is %s.
+  link %s is %s  link best version is %s  link best version not available  link currently absent  link currently points to %s  slave %s is %s  slave %s: %s %7jd bytes, %5d lines   %c  %-20.127s %.127s
+ %d in %s:  %d package, from the following section: %d packages, from the following sections: %s (%jd bytes)
+ %s (%s) breaks %s and is %s.
+ %s (not a plain file)
+ ==> Deleted (by you or by a script) since installation.
+ ==> File on system created by you or by a script.
+ ==> File also in package provided by package maintainer.
+ ==> Keeping old config file as default.
+ ==> Modified (by you or by a script) since installation.
+ ==> Package distributor has shipped an updated version.
+ ==> Using current old file as you requested.
+ ==> Using new config file as default.
+ ==> Using new file as you requested.
+ Package %s: part(s)  The default action is to install the new version.
+ The default action is to keep your current version.
+ and  depends on  new Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd bytes.
+ old Debian package, version %d.%d.
+ size %jd bytes: control archive=%jd, main archive=%jd.
+%d expected program not found in PATH or not executable
+%s%d expected programs not found in PATH or not executable
+%s%d file or directory currently installed.)
+%d files and directories currently installed.)
+%d requested control component is missing%d requested control components are missing%s (subprocess): %s
+%s - priority %d%s breaks %s%s conflicts with %s%s corrupt: %s%s debugging option, --debug=<octal> or -D<octal>:
+
+ Number  Ref. in source   Description
+%s depends on %s%s enhances %s%s forcing options - control behaviour when problems found:
+  warn but continue:  --force-<thing>,<thing>,...
+  stop with error:    --refuse-<thing>,<thing>,... | --no-force-<thing>,...
+ Forcing things:
+%s is not properly installed; ignoring any dependencies on it%s pre-depends on %s%s recommends %s%s subprocess failed with wait status code %d%s subprocess returned error exit status %d%s subprocess was interrupted%s subprocess was killed by signal (%s)%s%s suggests %s%s:
+    Part format version:            %d.%d
+    Part of package:                %s
+        ... version:                %s
+        ... architecture:           %s
+        ... MD5 checksum:           %s
+        ... length:                 %jd bytes
+        ... split every:            %jd bytes
+    Part number:                    %d/%d
+    Part length:                    %jd bytes
+    Part offset:                    %jd bytes
+    Part file size (used portion):  %jd bytes
+
+%s: conffile '%.250s' is not a plain file or symlink (= '%s')%s: conffile '%.250s' resolves to degenerate filename
+ ('%s' is a symlink to '%s')%s: config file '%s' is a circular link
+ (= '%s')%s: dependency problems, but configuring anyway as you requested:
+%s%s: dependency problems, but processing triggers anyway as you requested:
+%s%s: dependency problems, but removing anyway as you requested:
+%s%s: error binding input to bzip2 stream%s: error binding input to gzip stream%s: error binding output to bzip2 stream%s: error binding output to gzip stream%s: failed to link '%.250s' to '%.250s': %s%s: failed to remove '%.250s' (before overwrite): %s%s: failed to remove '%.250s': %s%s: failed to remove old backup '%.250s': %s%s: failed to remove old distributed version '%.250s': %s%s: failed to rename '%.250s' to '%.250s': %s%s: internal bzip2 read error%s: internal bzip2 read error: '%s'%s: internal bzip2 write error%s: internal bzip2 write error: '%s'%s: internal gzip read error%s: internal gzip read error: '%s'%s: internal gzip write error%s: internal gzip write error: %s%s: internal gzip write error: '%s'%s: lzma close error%s: lzma error: %s%s: lzma read error%s: lzma write error%s: pass-through copy error: %s%s: unable to open %s for hash: %s%s: unable to readlink conffile '%s'
+ (= '%s'): %s%s: unable to stat config file '%s'
+ (= '%s'): %s'%.255s' contains no control component '%.255s''%.255s' is not a Debian format archive'%s' clashes with '%s''%s' contains user-defined Priority value '%s''%s' does not take a value'%s' field, invalid package name '%.255s': %s'%s' field, missing architecture name, or garbage where architecture name expected'%s' field, missing package name, or garbage where package name expected'%s' field, reference to '%.255s':
+ '%c' is obsolete, use '%c=' or '%c%c' instead'%s' field, reference to '%.255s':
+ bad version relationship %c%c'%s' field, reference to '%.255s':
+ implicit exact match on version number, suggest using '=' instead'%s' field, reference to '%.255s':
+ version value starts with non-alphanumeric, suggest adding a space'%s' field, reference to '%.255s': invalid architecture name '%.255s': %s'%s' field, reference to '%.255s': version unterminated'%s' field, syntax error after reference to package '%.255s''%s' needs a value'%s' not found in PATH or not executable(Noting disappearance of %s, which has been completely replaced.)
+(Reading database ... (no description available)(total %jd bytes)
+, core dumped-%c option does not take a value-%c option takes a value--%s --pending does not take any non-option arguments--%s --recursive needs at least one path argument--%s needs .deb filename and directory arguments--%s needs <name>--%s needs <name> <path>--%s needs a .deb filename argument--%s needs a <directory> argument--%s needs a <file> argument--%s needs a single argument--%s needs a target directory.
+Perhaps you should be using dpkg --install ?--%s needs a valid package name but '%.250s' is not: %s--%s needs at least one package archive file argument--%s needs at least one package name argument--%s needs four arguments--%s option does not take a value--%s option takes a value--%s requires a positive octal argument--%s requires one or more part file arguments--%s takes at most one Packages-file argument--%s takes at most two arguments--%s takes at most two arguments (.deb and directory)--%s takes exactly one argument--%s takes exactly two arguments--%s takes no arguments--%s takes one <archname> argument--%s takes one <pkgname> argument--%s takes one <trigname> argument--%s takes one <version> argument--%s takes one package name argument--%s takes only one argument (.deb filename)--auto requires exactly one part file argument--auto requires the use of the --output option--compare-versions bad relation--compare-versions takes three arguments: <version> <relation> <version>--search needs at least one file name pattern argument--split needs a source filename argument--split takes at most a source filename and destination prefix--update given but %s does not exist--update is useless for --remove... it looks like that went OK.../%s; however:
+<compress> from tar -cf<deb> is the filename of a Debian format archive.
+<cfile> is the name of an administrative file component.
+<cfield> is the name of a field in the main 'control' file.
+
+<decompress><link> and <path> can't be the same<link> is the symlink pointing to %s/<name>.
+  (e.g. /usr/bin/pager)
+<name> is the master name for this link group.
+  (e.g. pager)
+<path> is the location of one of the alternative target files.
+  (e.g. /usr/bin/less)
+<priority> is an integer; options with higher numbers have higher priority in
+  automatic mode.
+
+<package status and progress file descriptor><standard error><standard input><standard output>Adding '%s'
+Allow installation of conflicting packagesAlternative %s unchanged because choice %s is not available.Always install missing config filesAlways use the new config files, don't promptAlways use the old config files, don't promptAnother process has locked the database for writing, and might currently be
+modifying it, some of the following problems might just be due to that.
+ArchitectureAuthenticating %s ...
+Commands:
+  --add <owner> <group> <mode> <path>
+                           add a new <path> entry into the database.
+  --remove <path>          remove <path> from the database.
+  --list [<glob-pattern>]  list current overrides in the database.
+
+Commands:
+  --check-supported                Check if the running dpkg supports triggers.
+
+Commands:
+  --install <link> <name> <path> <priority>
+    [--slave <link> <name> <path>] ...
+                           add a group of alternatives to the system.
+  --remove <name> <path>   remove <path> from the <name> group alternative.
+  --remove-all <name>      remove <name> group from the alternatives system.
+  --auto <name>            switch the master link <name> to automatic mode.
+  --display <name>         display information about the <name> group.
+  --query <name>           machine parseable version of --display <name>.
+  --list <name>            display all targets of the <name> group.
+  --get-selections         list master alternative names and their status.
+  --set-selections         read alternative status from standard input.
+  --config <name>          show alternatives for the <name> group and ask the
+                           user to select which one to use.
+  --set <name> <path>      set <path> as alternative for <name>.
+  --all                    call --config on all alternatives.
+
+Commands:
+  -s|--split <file> [<prefix>]     Split an archive.
+  -j|--join <part> <part> ...      Join parts together.
+  -I|--info <part> ...             Display info about a part.
+  -a|--auto -o <complete> <part>   Auto-accumulate parts.
+  -l|--listq                       List unmatched pieces.
+  -d|--discard [<filename> ...]    Discard unmatched pieces.
+
+Commands:
+  [--add] <file>           add a diversion.
+  --remove <file>          remove the diversion.
+  --list [<glob-pattern>]  show file diversions.
+  --listpackage <file>     show what package diverts the file.
+  --truename <file>        return the diverted file.
+
+Comparison operators for --compare-versions are:
+  lt le eq ne ge gt       (treat empty version as earlier than any version);
+  lt-nl le-nl ge-nl gt-nl (treat empty version as later than any version);
+  < << <= = >= >> >       (only for compatibility with control file syntax).
+
+Configuration file '%s'
+Configuration file '%s' (actually '%s')
+Configure any package which may help this oneDe-configuring %s (%s) ...
+De-configuring %s (%s), to allow removal of %s (%s) ...
+Debian %s package management program query tool version %s.
+Debian %s package trigger utility version %s.
+Debian %s version %s.
+Debian '%s' package archive backend version %s.
+Debian '%s' package management program version %s.
+Debian '%s' package split/join tool; version %s.
+Deleted %s.
+Dependencies and conflictsDescriptionDesired=Unknown/Install/Remove/Purge/Hold
+| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
+|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
+Do not perform safe I/O operations when unpackingErrors were encountered while processing:
+Exit status:
+  0 = ok
+  1 = with --auto, file is not a part
+  2 = trouble
+File '%.250s' is not part of a multipart archive.
+Format syntax:
+  A format is a string that will be output for each package. The format
+  can include the standard escape sequences \n (newline), \r (carriage
+  return) or \\ (plain backslash). Package information can be included
+  by inserting variable references to package fields using the ${var[;width]}
+  syntax. Fields will be right-aligned unless the width is negative in which
+  case left alignment will be used.
+Generally helpful progress informationIgnoring request to remove shared diversion '%s'.
+Ignoring request to rename file '%s' owned by diverting package '%s'
+Information about %d package was updated.
+Information about %d packages was updated.
+Insane amounts of drivelInstall a package even if it fails authenticity checkInstall even if it would break another packageInstalling new version of config file %s ...
+Invocation and status of maintainer scriptsJunk files left around in the depot directory:
+Leaving '%s'
+Lots of dependencies/conflicts outputLots of drivel about eg the dpkg/info directoryLots of output for each configuration fileLots of output for each file processedLots of output regarding triggersMSDOS end of file (^Z) in field name '%.*s'MSDOS end of file (^Z) in value of field '%.*s' (missing newline?)More than one copy of package %s has been unpacked
+ in this run !  Only configuring it once.
+NameNo diversion '%s', none removed.
+Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbinNothing to configure.Offer to replace config files with no new versionsOptions:
+  --admindir=<directory>           Use <directory> instead of %s.
+  --by-package=<package>           Override trigger awaiter (normally set
+                                     by dpkg).
+  --await                          Package needs to await the processing.
+  --no-await                       No package needs to await the processing.
+  --no-act                         Just test - don't actually change anything.
+
+Options:
+  --depotdir <directory>           Use <directory> instead of %s/%s.
+  -S|--partsize <size>             In KiB, for -s (default is 450).
+  -o|--output <file>               Filename, for -j (default is
+                                     <package>_<version>_<arch>.deb).
+  -Q|--npquiet                     Be quiet when -a is not a part.
+  --msdos                          Generate 8.3 filenames.
+
+Options:
+  -v, --verbose                    Enable verbose output.
+  -D, --debug                      Enable debugging output.
+      --showformat=<format>        Use alternative format for --show.
+      --deb-format=<format>        Select archive format.
+                                     Allowed values: 0.939000, 2.0 (default).
+      --nocheck                    Suppress control file check (build bad
+                                     packages).
+      --root-owner-group           Forces the owner and groups to root.
+      --[no-]uniform-compression   Use the compression params on all members.
+  -z#                              Set the compression level when building.
+  -Z<type>                         Set the compression type used when building.
+                                     Allowed types: gzip, xz, none.
+  -S<strategy>                     Set the compression strategy when building.
+                                     Allowed values: none; extreme (xz);
+                                     filtered, huffman, rle, fixed (gzip).
+
+Output for each configuration fileOutput for each file processedOverwrite a diverted file with an undiverted versionOverwrite a file from one package with anotherOverwrite one package's directory with another's filePATH is missing important programs, problems likelyPATH is not setPackage %s is on hold, not touching it.  Use --force-hold to override.
+Package %s listed more than once, only processing once.
+Package '%s' does not contain any files (!)
+Packages not yet reassembled:
+Part %d of package %s filed (still want PathPre-Depends fieldPreparing to unpack %s ...
+Press <enter> to keep the current choice[*], or type selection number: PriorityProcess even packages with wrong or no architectureProcess even packages with wrong versionsProcessing triggers for %s (%s) ...
+Processing was halted because there were too many errors.
+Purging configuration files for %s (%s) ...
+Putting package %s together from %d part: Putting package %s together from %d parts: Recorded info about %s from %s.
+Remove an essential packageRemove packages which require installationRemoving %s (%s) ...
+Removing '%s'
+Replace a package with a lower versionReplacing available packages info, using %s.
+Replacing files in old package %s (%s) ...
+Selecting previously unselected package %s.
+SelectionSet all force optionsSetting up %s (%s) ...
+Silly amounts of output regarding triggersSkip invalid line: %sSkip unknown alternative %s.Skipping unselected package %s.
+Splitting package %s into %d part: Splitting package %s into %d parts: StatusThe following packages are awaiting processing of triggers that they
+have activated in other packages.  This processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages are in a mess due to serious problems during
+installation.  They must be reinstalled for them (and any packages
+that depend on them) to function properly:
+The following packages are missing the list control file in the
+database, they need to be reinstalled:
+The following packages are missing the md5sums control file in the
+database, they need to be reinstalled:
+The following packages are only half configured, probably due to problems
+configuring them the first time.  The configuration should be retried using
+dpkg --configure <package> or the configure menu option in dselect:
+The following packages are only half installed, due to problems during
+installation.  The installation can probably be completed by retrying it;
+the packages can be removed using dselect or dpkg --remove:
+The following packages do not have an architecture:
+The following packages have an illegal architecture:
+The following packages have an unknown foreign architecture, which will
+cause dependency issues on front-ends. This can be fixed by registering
+the foreign architecture with dpkg --add-architecture:
+The following packages have been triggered, but the trigger processing
+has not yet been done.  Trigger processing can be requested using
+dselect or dpkg --configure --pending (or dpkg --triggers-only):
+The following packages have been unpacked but not yet configured.
+They must be configured using dpkg --configure or the configure
+menu option in dselect for them to work:
+There is %d choice for the alternative %s (providing %s).There are %d choices for the alternative %s (providing %s).There is no program which provides %s.There is only one alternative in link group %s (providing %s): %sThis is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Trigger activation and processingTry to (de)install things even when not rootTurn all dependency problems into warningsTurn dependency version problems into warningsType 'exit' when you're done.
+Type dpkg --help for help about installing and deinstalling packages [*];
+Use 'apt' or 'aptitude' for user-friendly package management;
+Type dpkg -Dhelp for a list of dpkg debug flag values;
+Type dpkg --force-help for a list of forcing options;
+Type dpkg-deb --help for help about manipulating *.deb files;
+
+Options marked [*] produce a lot of output - pipe it through 'less' or 'more' !Type dpkg-deb --help for help about manipulating *.deb files;
+Type dpkg --help for help about installing and deinstalling packages.Type dpkg-split --help for help.Type dpkg-trigger --help for help about this utility.Updating available packages info, using %s.
+Usage: %s [<option> ...] <command>
+
+Use '%s --help' for program usage information.Use --help for help about diverting files.Use --help for help about overriding file stat information.Use --help for help about querying packages.Use the default option for new config files if one
+is available, don't prompt. If no default can be found,
+you will be prompted unless one of the confold or
+confnew options is also givenVersionVersion of dpkg with working %s support not yet configured.
+ Please use 'dpkg --configure dpkg', and then try again.
+When adding, default is --local and --divert <original>.distrib.
+When removing, --package or --local and --divert must match if specified.
+Package preinst/postrm scripts should always specify --package and --divert.
+[default=N][default=Y][no default]admindir must be inside instdir for dpkg to work properlyalso configuring '%s' (required by '%s')alternative %s (part of link group %s) doesn't exist; removing from list of alternativesalternative %s can't be master: it is a slave of %salternative %s can't be slave of %s: it is a master alternativealternative %s can't be slave of %s: it is a slave of %salternative %s for %s not registered; not removingalternative %s for %s not registered; not settingalternative link %s is already managed by %salternative link %s is already managed by %s (slave of %s)alternative link is not absolute as it should be: %salternative name (%s) must not contain '/' and spacesalternative path is not absolute as it should be: %sambiguous package name '%s' with more than one installed instancean override for '%s' already exists, but --force specified so will be ignoredan override for '%s' already exists; abortingany diversion of %sany diversion of %s to %sar member name '%s' length too longar member size %jd too largearchitecture<none>architecture<unknown>architecture '%s' is illegal: %sarchitecture '%s' is reserved and cannot be addedarchive '%.250s' contains two control members, giving uparchive contained object '%.255s' of unknown type 0x%xarchive control member sizearchive has invalid format version: %sarchive has malformed control member size '%s'archive has no newlines in headerarchive information header memberarchive is format version %d.%d; get a newer dpkg-debarchive magic version numberarchive member headerarchive part numbersarchive part offsetarchive parts numberarchive total sizeauto modeautomatic updates of %s/%s are disabled; leaving it aloneawaiting trigger processing by another packageblank line in value of field '%.*s'broken due to failed removal or installationbroken due to postinst failurecan't install unknown choice %scan't mmap package info file '%.255s'can't remove old postrm scriptcan't stat package info file '%.255s'cannot append ar member file (%s) to '%s': %scannot append split package part '%s' to '%s': %scannot append to '%s'cannot close decompressor pipecannot compute MD5 hash for file '%s': %scannot compute MD5 hash for tar file '%.255s': %scannot copy '%s' into archive '%s': %scannot copy '%s' to '%s': %scannot copy archive member from '%s' to decompressor pipe: %scannot copy extracted data for '%.255s' to '%.255s': %scannot divert file '%s' to itselfcannot extract control file '%s' from '%s': %scannot extract split package part '%s': %scannot open '%.255s' (in '%.255s')cannot open archive part file '%.250s'cannot open directory '%s'cannot read info directorycannot remove '%.250s'cannot remove architecture '%s' currently in use by the databasecannot remove non-foreign architecture '%s'cannot remove old backup config file '%.250s' (of '%.250s')cannot remove old config file '%.250s' (= '%.250s')cannot remove old files listcannot rename '%s' to '%s'cannot satisfy pre-dependencies for %.250s (wanted due to %.250s)cannot scan directory '%.255s'cannot scan updates directory '%.255s'cannot see how to satisfy pre-dependency:
+ %scannot skip archive control member from '%s': %scannot skip archive member from '%s': %scannot skip file '%.255s' (replaced or excluded?) from pipe: %scannot skip padding for file '%.255s': %scannot skip split package header for '%s': %scannot stat '%.255s' (in '%.255s')cannot stat file '%s'cannot stat pathname '%s'cannot zap possible trailing zeros from dpkg-deb: %scharacter '%c' not allowed (only letters, digits and characters '%s')compressed data is corruptconffile '%.250s' does not appear in packageconffile '%.250s' is not stattableconffile '%s' is not a plain fileconffile difference visualizerconffile filename '%s' contains trailing white spacesconffile name '%s' is duplicatedconffile shellconfiguration error: %s:%d: %sconflicting actions -%c (--%s) and -%c (--%s)conflicting diversions involving '%.250s' or '%.250s'conflicting packages - not installing %.250sconsidering deconfiguration of %s, which would be broken by %s ...considering deconfiguration of essential
+ package %s, to enable %sconsidering removing %s in favour of %s ...control directory has bad permissions %03lo (must be >=0755 and <=0775)control directory is not a directorycontrol file '%s' does not existcontrol file contains %ccontrol membercorrupt info database format file '%s'could not open log '%s': %scould not stat old file '%.250s' so not deleting it: %scouldn't open '%i' for streamcurrent alternative %s is unknown, switching to %s for link group %scycle found while processing triggers:
+ chain of packages whose triggers are or may be responsible:data memberdependency problems - leaving unconfigureddependency problems - not removingdependency problems prevent configuration of %s:
+%sdependency problems prevent removal of %s:
+%sdiscarding obsolete slave link %s (%s)diversion by %s from: %s
+diversion by %s to: %s
+diversion of %s by %sdiversion of %s to %s by %sdivert-to may not contain newlinesdiverted by %s to: %s
+done
+downgrading %.250s from %.250s to %.250sdpkg not recorded as installed, cannot check for %s support!
+duplicate awaited trigger package '%.255s'duplicate file trigger interest for filename '%.250s' and package '%.250s'duplicate path %sduplicate pending trigger '%.255s'duplicate slave link %sduplicate slave name %sduplicate value for '%s' fieldduplicate value for user-defined field '%.*s'empty string from fgets reading conffilesempty trigger names are not permittedend of file after field name '%.*s'end of file before value of field '%.*s' (missing final newline)end of file during value of field '%.*s' (missing final newline)epochepoch in version is emptyepoch in version is negativeepoch in version is not numberepoch in version is too bigerrorerror checking '%s'error closing %.250serror closing configuration file '%.255s'error closing/writing '%.255s'error creating device '%.255s'error creating directory '%.255s'error creating hard link '%.255s'error creating new backup file '%s'error creating pipe '%.255s'error creating symbolic link '%.255s'error ensuring '%.250s' doesn't existerror executing hook '%s', exit code %derror formatting string into varbuf variableerror in show format: %serror installing new file '%s'error opening conffiles fileerror opening configuration directory '%s'error reading %.250serror reading %s from file %.255serror reading conffiles fileerror reading from dpkg-deb pipeerror reading triggers deferred file '%.250s'error removing old backup file '%s'error setting ownership of '%.255s'error setting ownership of symlink '%.255s'error setting permissions of '%.255s'error setting timestamps of '%.255s'error trying to open %.250serror un-catching signal %s: %s
+error while cleaning uperror while writing '%s'error writing '%s'error writing to '%s'error writing to architecture listerror writing to stderr, discovered before conffile promptfailed to allocate memoryfailed to allocate memory for new entry in list of failed packages: %sfailed to chdir to '%.255s'failed to chdir to directoryfailed to chroot to '%.250s'failed to close after read: '%.255s'failed to create directoryfailed to create pipefailed to dup for fd %dfailed to dup for std%sfailed to fstat ar member file (%s)failed to fstat archivefailed to fstat diversions filefailed to fstat statoverride filefailed to make temporary file (%s)failed to open configuration file '%.255s' for reading: %sfailed to open diversions filefailed to open package info file '%.255s' for readingfailed to open statoverride filefailed to open trigger interest list file '%.250s'failed to readfailed to read '%.255s' (in '%.255s')failed to read archive '%.255s'failed to remove incorporated update file %.255sfailed to remove my own update file %.255sfailed to rewind temporary file (%s)failed to rewind trigger interest file '%.250s'failed to seekfailed to stat (dereference) existing symlink '%.250s'failed to stat (dereference) proposed new symlink target '%.250s' for symlink '%.250s'failed to stat temporary file (%s)failed to unlink temporary file (%s), %sfailed to writefailed to write %s database record about '%.50s' to '%.250s'failed to write details of '%.50s' to '%.250s'failed to write filename to tar pipe (%s)fgets gave an empty string from '%.250s'field name '%.*s' must be followed by colonfield width is out of rangefile '%.250s' has invalid format version: %sfile '%.250s' is corrupt - %.250s missingfile '%.250s' is corrupt - bad MD5 checksum '%.250s'file '%.250s' is corrupt - bad archive header magicfile '%.250s' is corrupt - bad archive part numberfile '%.250s' is corrupt - bad digit (code %d) in %sfile '%.250s' is corrupt - bad magic at end of first headerfile '%.250s' is corrupt - bad magic at end of second headerfile '%.250s' is corrupt - bad number of archive partsfile '%.250s' is corrupt - bad padding character (code %d)file '%.250s' is corrupt - missing newline after %.250sfile '%.250s' is corrupt - no slash between archive part numbersfile '%.250s' is corrupt - nulls in info sectionfile '%.250s' is corrupt - second member is not data memberfile '%.250s' is corrupt - size is wrong for quoted part numberfile '%.250s' is corrupt - too shortfile '%.250s' is corrupt - wrong number of parts for quoted sizesfile '%.250s' is format version %d.%d; get a newer dpkg-splitfile '%.250s' is not an archive partfile '%s' is corrupt; out of range integer in %sfile '%s' is not an archive part
+file format not recognizedfile looks like it might be an archive which has been
+ corrupted by being downloaded in ASCII modefile may not contain newlinesfile triggers record mentions illegal package name '%.250s' (for interest in file '%.250s'): %.250sfilename "%s" is not absolutefiles '%.250s' and '%.250s' are not parts of the same filefiles list file for package '%.250s' contains empty filenamefiles list file for package '%.250s' is missing final newlinefiles list file for package '%.250s' missing; assuming package has no files currently installedforcing reinstallation of alternative %s because link group %s is brokenfork failedformat version followed by junkformat version has no dotformat version numberformat version with empty major componentformat version with empty minor componentformat version with too big major componentformat version with too big minor componentgenerated corrupt ar header for '%s'header is too long, making part too long; the package name or version
+numbers must be extraordinarily long, or something; giving upignoring %d warning about the control file(s)ignoring %d warnings about the control file(s)ignoring breakage, may proceed anyway!ignoring conflict, may proceed anyway!ignoring dependency problem with %s:
+%signoring pre-dependency problem!ignoring request to remove %.250s which isn't installedignoring request to remove %.250s, only the config
+ files of which are on the system; use --purge to remove them tooillegal architecture name in specifier '%s:%s': %sillegal awaited package name '%.250s': %.250sillegal package name at line %d: %.250sillegal package name in awaited trigger '%.255s': %sillegal package name in specifier '%s%s%s': %sillegal pending trigger name '%.255s': %sinstallation of %.250sinstalledinstalling %.250s would break %.250s, and
+ deconfiguration is not permitted (--auto-deconfigure might help)installing %.250s would break existing softwareinternal errorinternal error (bug)invalid character '%c' in archive '%.250s' member '%.16s' sizeinvalid character '%c' in field widthinvalid character in revision numberinvalid character in version numberinvalid compression level for -%c: %ldinvalid compressor parameters: %sinvalid deb format version: %sinvalid integer for -%c: '%.250s'invalid integer for --%s: '%.250s'invalid or unknown syntax in trigger name '%.250s' (in trigger interests for package '%.250s')invalid package name '%.250s' in triggers deferred file '%.250s'invalid statusinvalid trigger name '%.250s': %.250sline not terminated while trying to read %sline too long or not terminated while trying to read %slink %s is both primary and slavelocal diversion from: %s
+local diversion of %slocal diversion of %s to %slocal diversion to: %s
+locally diverted to: %s
+long filenamesmaintainer script '%.50s' has bad permissions %03lo (must be >=0555 and <=0775)maintainer script '%.50s' is not a plain file or symlinkmaintainer script '%.50s' is not stattablemalloc failed (%zu bytes)manual modemaster filemaster linkmay have trouble removing %s, as it provides %s ...may not be empty stringmemory usage limit reachedmismatch on divert-to
+  when removing '%s'
+  found '%s'mismatch on package
+  when removing '%s'
+  found '%s'missing closing bracemixed non-coinstallable and coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmulti-archmultiple Conflicts and Replacesmultiple non-coinstallable package instances present; most probably due to an upgrade from an unofficial dpkgmultiple statoverrides present for file '%.250s'must be called from a maintainer script (or with a --by-package option)must start with an alphanumericmust start with an alphanumeric charactername %s is both primary and slaveneed an action optionnewline in field name '%.*s'newlines prohibited in update-alternatives files (%s)no 'control' file in control archive!no alternatives for %sno override presentno package information in '%.255s'no package named '%s' is installed, cannot configureno packages found matching %sno path found matching pattern %sno, %s is essential, will not deconfigure
+ it in order to enable %sno, cannot proceed with %s (--auto-deconfigure will help):
+%snot checking contents of control areanot installednot installed but configs remainnot removing %s since it's not a symlinknot replacing %s with a linknothing after colon in version numbernull package name in --%s comma-separated list '%.250s'number of archive partsobsolete '--%s' option; unavailable packages are automatically cleaned upobsolete compression type '%s'; use xz insteadobsolete compression type '%s'; use xz or gzip insteadobsolete option '--%s'old conffile '%.250s' was an empty directory (and has now been deleted)old file '%.250s' is the same as several new files! (both '%.250s' and '%.250s')old version of package has overly-long info file name starting '%.250s'only exact versions may be used for '%s' fieldopen component '%.255s' (in %.255s) failed in an unexpected wayout of memory for new cleanup entryout of memory for new cleanup entry with many argumentsout of memory for new error contextoutside error context, abortingoverriding problem because --force enabled:package %.250s is already installed and configuredpackage %.250s is not ready for configuration
+ cannot configure (current status '%.250s')package %.250s is not ready for trigger processing
+ (current status '%.250s' with no pending triggers)package %s %s cannot be configured because %s is at a different version (%s)package %s cannot be configured because %s is not ready (current status '%s')package %s contained list as info filepackage %s requires reinstallation, but will remove anyway as you requestedpackage %s requires reinstallation, will not removepackage %s was on hold, processing it anyway as you requestedpackage '%s' is not availablepackage '%s' is not installedpackage '%s' is not installed and no information is availablepackage architecturepackage architecture (%s) does not match system (%s)package contains overly-long control info file name (starting '%.50s')package control info contained directory '%.250s'package control info rmdir of '%.250s' didn't say not a dirpackage control information extractionpackage diverts others to: %s
+package field value extractionpackage file MD5 checksumpackage filesystem archive extractionpackage has status %s but triggers are awaitedpackage has status %s but triggers are pendingpackage may not contain newlinespackage namepackage name has characters that aren't lowercase alphanums or '-+.'package signature verificationpackage version numberpart %d is missingpart file '%.250s' is not a plain filepart size is far too large or is not positivepart size must be at least %d KiB (to allow for header)passed
+pastepre-dependency problem - not installing %.250sprioritypriority is out of rangepriority must be an integerpriority of %s is out of range: %spriority of %s: %sread error in %.250sread error in '%.250s'read error in configuration file '%.255s'read error on standard inputread error on stdin at conffile promptreading package info file '%.255s'reading package info file '%s': %sreading statoverride file '%.250s'reassembled package fileregarding %s containing %s, pre-dependency problem:
+%sregarding %s containing %s:
+%sremoval of %.250sremoving architecture '%s' currently in use by databaseremoving manually selected alternative - switching %s to auto moderename involves overwriting '%s' with
+  different file '%s', not allowedrename: remove duplicate old link '%s'requested operation requires superuser privilegerevision number is emptyrm command for cleanupsearched, but found no packages (files matching *.deb)section<unknown>setting up automatic selection of %sseveral package info entries found, only one allowedshell command to move filesskip creation of %s because associated file %s (of link group %s) doesn't existslave fileslave linkslave link same as main link %sslave namesource file '%.250s' not a plain filesplit package reassemblystatoverride file contains empty linestatoverride file is missing final newlinestatusstatus loggerstripping trailing /subprocess %s returned error exit status %dsymbolic link '%.250s' size has changed from %jd to %zdsyntax error in file triggers file '%.250s'syntax error in statoverride filesyntax error in triggers deferred file '%.250s' at line %d character %zd '%s'takes one argument, the trigger nametarget is directory - cannot skip control file checkthere are several versions of part %d - at least '%.250s' and '%.250s'there is no script in the new version of the package - giving upto return to automatic updates use '%s --auto %s'too many errors, stoppingtoo many nested errors during error recoverytoo-long line or missing newline in '%.250s'treewalk root %s is not a directorytrigger interest file '%.250s' syntax error; illegal package name '%.250s': %.250strigger name contains invalid charactertrigger records not yet in existencetriggeredtriggers ci file '%.250s' contains illegal trigger syntax in trigger name '%.250s': %.250striggers ci file contains unknown directive '%.250s'triggers ci file contains unknown directive syntaxtriggers data directory not yet createdtriggers looping, abandonedtrying script from the new package instead ...trying to overwrite '%.250s', which is also in package %.250s %.250strying to overwrite '%.250s', which is the diverted version of '%.250s'trying to overwrite '%.250s', which is the diverted version of '%.250s' (package: %.100s)trying to overwrite directory '%.250s' in package %.250s %.250s with nondirectorytrying to overwrite shared '%.250s', which is different from other instances of package %.250stwo commands specified: --%s and --%sunable to (re)open input part file '%.250s'unable to change ownership of target file '%.250s'unable to check existence of '%.250s'unable to check file '%s' lock statusunable to check for existence of archive '%.250s'unable to chown backup symlink for '%.255s'unable to clean up mess surrounding '%.255s' before installing another versionunable to close file '%s'unable to close new file '%.250s'unable to close new triggers deferred file '%.250s'unable to close updated status of '%.250s'unable to create '%.255s'unable to create '%.255s' (while processing '%.255s')unable to create file '%s'unable to create new file '%.250s'unable to create temporary directoryunable to create triggers state directory '%.250s'unable to delete control info file '%.250s'unable to delete old directory '%.250s': %sunable to delete used-up depot file '%.250s'unable to discard '%.250s'unable to execute %s (%s)unable to fill %.250s with paddingunable to flush %.250s after paddingunable to flush file '%s'unable to flush new file '%.250s'unable to flush updated status of '%.250s'unable to fstat source fileunable to fsync updated status of '%.250s'unable to get file descriptor for directory '%s'unable to ignore signal %s before running %.250sunable to install '%.250s' as '%.250s'unable to install (supposed) new info file '%.250s'unable to install new info file '%.250s' as '%.250s'unable to install new triggers deferred file '%.250s'unable to install new version of '%.255s'unable to install updated status of '%.250s'unable to lock %sunable to make backup link of '%.255s' before installing new versionunable to make backup symlink for '%.255s'unable to move aside '%.255s' to install new versionunable to open '%.255s'unable to open directory '%s'unable to open file '%s'unable to open new depot file '%.250s'unable to open output file '%.250s'unable to open source file '%.250s'unable to open temp control directoryunable to open triggers ci file '%.250s'unable to open triggers deferred file '%.250s'unable to open/create new triggers deferred file '%.250s'unable to read depot directory '%.250s'unable to read file triggers file '%.250s'unable to read filedescriptor flags for %.250sunable to read link '%.255s'unable to read part file '%.250s'unable to remove '%s'unable to remove backup copy of '%.250s'unable to remove copied source file '%s'unable to remove newly-extracted version of '%.250s'unable to remove newly-installed version of '%.250s'unable to remove newly-installed version of '%.250s' to allow reinstallation of backup copyunable to remove obsolete info file '%.250s'unable to rename new depot file '%.250s' to '%.250s'unable to reopen part file '%.250s'unable to restore backup version of '%.250s'unable to securely remove '%.250s'unable to securely remove '%.255s'unable to securely remove old file '%.250s': %sunable to seek to start of %.250s after paddingunable to set buffering on %s database fileunable to set close-on-exec flag for %.250sunable to set execute permissions on '%.250s'unable to set mode of target file '%.250s'unable to setenv for maintainer scriptunable to setenv for subprocessesunable to stat %s '%.250s'unable to stat %s '%.250s': %sunable to stat '%.250s'unable to stat control directoryunable to stat current installed conffile '%.250s'unable to stat new distributed conffile '%.250s'unable to stat other new file '%.250s'unable to stat restored '%.255s' before installing another versionunable to stat source file '%.250s'unable to stat triggers deferred file '%.250s'unable to sync directory '%s'unable to sync file '%.255s'unable to sync file '%s'unable to sync new file '%.250s'unable to truncate for updated status of '%.250s'unable to unlock %sunable to write file '%s'unable to write new file '%.250s'unable to write new triggers deferred file '%.250s'unable to write to status fd %dunable to write updated status of '%.250s'unbalanced quotes in '%s'unexpected bzip2 errorunexpected data after package and selection at line %dunexpected end of file in %s in %.255sunexpected end of file or streamunexpected end of file while trying to read %sunexpected end of inputunexpected end of line after package name at line %dunexpected end of line in package name at line %dunexpected end of line in statoverride fileunknown argument '%s'unknown compression strategyunknown compression strategy '%s'!unknown compression type '%s'!unknown deb format version: %sunknown force/refuse option '%.*s'unknown option '%s'unknown option -%cunknown option --%sunknown wanted status at line %d: %.250sunpacked but not configuredunrecoverable fatal error, abortingunsupported compression presetunsupported compression type '%s' with uniform compressionunsupported options in file headerunsupported type of integrity checkupdates directory contains file '%.250s' whose name is too long (length=%d, max=%d)updates directory contains files with different length names (both %d and %d)updating alternative %s because link group %s has changed slave linksuser '%s' does not existuser-defined field name '%.*s' too shortusing %s to provide %s (%s) in auto modeusing %s to provide %s (%s) in manual modevalue for '%s' field has malformed line '%.*s'value for '%s' field not allowed in this contextverification on package %s failed!verification on package %s failed; but installing anyway as you requestedversion<none>version %.250s of %.250s already installed, skippingversion '%s' has bad syntaxversion '%s' has bad syntax: %sversion number does not start with digitversion number is emptyversion string has embedded spacesversion string is emptywait for %s subprocess failedwait for subprocess %s failedwarningwhile reading %s: %swhile removing %.250s, directory '%.250s' not empty so not removedwhile removing %.250s, unable to remove directory '%.250s': %s - directory may be a mount point?will not downgrade %.250s from %.250s to %.250s, skippingyes, will deconfigure %s (broken by %s)yes, will remove %s in favour of %syou must specify packages by their own names, not by quoting the names of the files they come inProject-Id-Version: dpkg 1.13
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2018-04-15 07:06+0800
+Last-Translator: 林博仁 <Buo.Ren.Lin@gmail.com>
+Language-Team: Chinese (traditional) <debian-l10n-chinese@lists.debian.org>
+Language: zh_TW
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=1; plural=0;
+
+ 套件尚待執行的觸發程式可能無法解決：
+
+在系統中找不到設定檔 `%s'。
+應您的要求，安裝新的設定檔。
+
+偵錯選項可以用位元 or 組合。
+請注意：其值和意義會隨時異動。
+
+使用「dpkg」工具來安裝和移除您系統上的套件，或是用「apt」或「aptitude」
+等較人性化的套件管理工具。被以「dpkg-deb --extract」命令解包的套件將不會
+被正確安裝！
+
+警告 - 使用標記 [!] 的選項，會嚴重破壞系統。
+預設啟用標記 [*] 的強制選項。
+     自安裝後即未曾被更動。
+     套件的版本和上次安裝的版本是相同的。
+     不是普通檔案              %.255s
+   您要如何處理？選項如下：
+    Y 或 I  ：安裝套件維護者所提供的版本
+    N 或 O  ：保留您原本安裝的版本
+      D     ：顯示兩者有何不同
+      Z     ：開啟命令列，以研判問題
+  %.250s（版本 %.250s）已存在且 %s。
+  即將安裝 %.250s（版本 %.250s）。
+  %.250s 現為 %s。
+  已安裝了 %.250s，不過卻是版本 %.250s。
+  %.250s 沒有被安裝。
+  即將清除 %.250s 的設定。
+  即將安裝 %.250s，不過卻是版本 %.250s。
+  即將移除 %.250s。
+  已解開了 %.250s，但是它還沒有被設定過。
+  已經解開了 %.250s，不過卻是版本 %.250s。
+  上次設定 %.250s 時，版本為 %.250s。
+  %.250s 提供了 %.250s，它已存在且 %s。
+  %.250s 提供了 %.250s，且將會被安裝。
+  %.250s 提供了 %.250s 但現在是 %s。
+  %.250s 提供了 %.250s，但要清除它的設定。
+  %.250s 提供了 %.250s，但會被移除。
+  %s（%s）提供了 %s。
+  -?, --help                       顯示這個說明訊息。
+      --version                    顯示版本資訊。
+
+  套件 %s 正要執行觸發程式。
+  %s 套件尚未設定。
+  套件 %s 未安裝。
+  即將移除套件 %s。
+  提供了 %2$s 的套件 %1$s 正要執行觸發程式。
+  提供了 %2$s 的套件 %1$s 尚未設定。
+  未曾安裝提供了 %2$s 的套件 %1$s。
+  提供了 %2$s 的套件 %1$s 即將被移除。
+  %s 在系統上的版本為 %s。
+  「%s」，由「%s」所提供，在系統上的版本為 %s。
+  %s 要設定的版本是 %s。
+  %s 連結現為 %s  連結的最佳版本為「%s」  連結的最佳版本現不存在  目前連結失效  目前連結指向 %s   %s 從屬連結為 %s  次要項目 %s：%s %7jd 位元組，%5d 行    %c  %-20.127s %.127s
+ %d 屬於 %s： %d 個套件，屬於以下類別： %s（%jd 位元組）
+ %s（%s）損毀了 %s，且已 %s。
+ %s（並非一般檔案）
+ ==> 在安裝後（被您或是某個腳本）刪掉了。
+ ==> 系統中的這個檔案是由您或是一個腳本所建立。
+ ==> 此檔案另外也由套件維護者在套件中提供。
+ ==> 預設上是保留原有的設定檔。
+ ==> 在安裝後曾被（您或某個腳本）修改過。
+ ==> 套件的提交者提供了一個更新版本。
+ ==> 按照您的要求，保留原有的舊檔案。
+ ==> 預設上是使用新的設定檔。
+ ==> 按照您的要求，使用新的檔案。
+套件 %s：分割 預設的動作是安裝新的版本。
+ 預設的動作是保留您目前使用的版本。
+ 和  相依於  新式 Debian 套件，版本 %d.%d。
+ 大小為 %jd 位元組：控制資訊封存檔=%jd 位元組。
+ 舊式 Debian 套件，版本 %d.%d。
+ 大小為 %jd 位元組：控制資訊封存檔=%jd，主封存檔=%jd。
+%d 所需的程式，在 PATH 中找不到或無法執行
+%s目前共安裝了 %d 個檔案和目錄。）
+找不到 %d 個要求的控制元件%s（子程序）：%s
+%s - 優先權 %d%s 會損毀 %s%s 衝突於 %s%s 損毀：%s%s 偵錯選項，--debug=<八進位數> 或 -D<八進位數>：
+
+ 編號    原始碼參照       說明
+%s 相依於 %s%s 加強了 %s%s 強制選項 - 發生問題時，程式的行為控制：
+  警告後繼續：  --force-<項目>,<項目>,...
+  錯誤終止：    --refuse-<項目>,<項目>,... | --no-force-<項目>,...
+ 強制項目：
+%s 未被正確安裝 - 忽略它所有的相依關係%s 預先相依於 %s%s 推薦 %s「%s」子進程失敗，並傳回了 %d 等待狀態碼(wait status code)%s 子進程傳回了 %d 錯誤退出狀態碼%s 子進程被中斷了%s 子進程被 (%s)%s 信號終止了%s 建議 %s%s：
+    分割檔格式版本：                %d.%d
+    分割檔的套件：                  %s
+        ... 版本：                  %s
+        ... 硬體平台：              %s
+        ... MD5 檢碼：              %s
+        ... 長度：                  %jd 位元組
+        ... 分割單位：              %jd 位元組
+    分割檔編號：                    %d/%d
+    分割檔長度：                    %jd 位元組
+    分割檔偏移位置：                %jd 位元組
+    分割檔大小（用到的部分）：      %jd 位元組
+
+%s：conffile '%.250s' 並非普通檔案或符號連結 (= '%s')%s：conffile '%.250s' 指向了有問題的檔名
+（'%s' 是指向 '%s' 的符號連結）%s：設定檔 '%s' 是循環連結
+ (= '%s')%s：相依問題，但還是依您要求強制設定：
+%s%s：存在軟體依賴關係問題，但還是應您的要求處理觸發程式：
+%s%s：發生相依上的問題，但還是應您要求強制移除：
+%s%s：輸入轉接 bzip2 資料串流錯誤%s：輸入轉接 gzip 資料串流錯誤%s：輸出轉接 bzip2 串流錯誤%s：輸出轉接 gzip 串流錯誤%s：無法建立 '%.250s' 指向 '%.250s' 的連結：%s%s：無法在取代檔案前，刪除 '%.250s'：%s%s：無法刪除 '%s'：%s%s：無法刪除舊備份檔 '%.250s'：%s%s：無法移除舊發佈版 '%.250s'：%s%s：無法將 '%.250s' 重新命名為 '%.250s'：%s%s：bzip2 內部讀取錯誤%s：bzip2 內部讀取錯誤：'%s'%s：內部 bzip2 錯誤%s：bzip2 內部寫入錯誤：'%s'%s：gzip 內部讀取錯誤%s：gzip 內部讀取錯誤：'%s'%s：gzip 內部寫入錯誤%s：gzip 內部寫入錯誤：%s%s：gzip 內部寫入錯誤：'%s'%s：lzma 關檔錯誤%s：lzma 錯誤：%s%s：lzma 讀取錯誤%s：lzma 寫入錯誤%s：直接資料對拷錯誤：%s%s：無法開啟 %s 計算雜湊：%s%s：無法 readlink conffile '%s'
+ (= '%s')：%s%s：無法取得設定檔 '%s' 的檔案資訊
+ (= '%s')：%s'%.255s' 中沒有控制元件 '%.255s'「%.255s」不是一個 Debian 格式的封存檔`%s' 和 `%s' 相衝突'%s' 包含使用者自訂的優先等級 '%s''%s' 不需參數值`%s' 欄位，無效的套件名稱 `%.255s'：%s'%s' 欄位，找不到硬體平台名稱，或硬體平台名稱是亂碼`%s' 欄位，找不到套件名稱，或是應當為套件名稱的地方是亂碼`%s' 欄位，參照至 `%.255s'：
+ `%c' 已廢棄，請替而使用 `%c=' 或 `%c%c'`%s' 欄位，參照至 `%.255s'：
+ 不正確的版本相依關係 %c%c`%s' 欄位，參照至 `%.255s'：
+ 未明確要求版本號完全一致，建議替而使用 `='`%s' 欄位，參照至 `%.255s'：
+ 版本號不是以英數字開頭，建議加一個空格'%s' 欄位，參照 '%.255s'：硬體平台名稱 '%.255s' 有誤：%s`%s' 欄位，參照至 `%.255s'：版本號未終止`%s' 欄位，在參照至套件 `%.255s' 後的語法有誤'%s' 需有參數值在 PATH 中找不到或無法執行 '%s'（注意到 %s 已經不復存在，它已被完全取代了。）
+（讀取資料庫 ... （無相關介紹）（合計 %jd 位元組）
+, core dumped-%c 選項並不需要參數-%c 選項需有一個參數--%s --pending 不需任何不是選項的參數--%s --recursive 需要至少一個路徑作為參數--%s 需要一個 .deb 檔名與目錄作為參數--%s 要有 <名稱>--%s 要有 <名稱> <路徑>--%s 需要一個 .deb 檔名作為參數--%s 需有 <目錄名> 參數--%s 需要 <檔案> 參數--%s 需要一個參數--%s 需要一個目的地目錄。
+或許您應該使用 dpkg --install？--%s 需要有效的套件名稱，不是 '%.250s'：%s--%s 需要至少一個套件壓縮檔作為參數--%s 需要至少一個套件名稱作為參數--%s 需要四個參數--%s 選項並不需要參數--%s 選項需有一個參數--%s 需要正的八進位參數--%s 需要一個以上分割檔當作參數--%s 需要至多一個 Packages-file 作為引數--%s 最多只有兩個參數--%s 至多可有兩個參數（.deb 和目錄）--%s 需要剛好一個參數--%s 需要兩個參數--%s 不需要參數--%s 需要一個 <archname> 作為引數--%s 需要一個套件名稱作為引數--%s 需要一個 <trigname> 作為引數--%s 需要一個 <version> 引數--%s 需要一個套件名稱參數--%s 只需一個參數（.deb 檔名）--auto 只需一個分割檔的名稱作為參數--auto 需要與 --output 一同使用--compare-versions 比較關係不適切--compare-versions 需有三個參數：<版本號> <比較關係> <版本號>--search 需要至少一個檔名表達式作為參數--split 需要一個來源檔作為參數--split 最多需要一個來源檔和目的路徑前綴做為參數要 --update 但找不到 %s--remove 時 --update 無效... 看來沒問題.../%s﹔然而：
+以 tar -cf <壓縮><deb> 是 Debian 格式壓縮檔的檔名。
+<cfile> 是某個管理用的檔案元件的名稱。
+<cfield> 是主 `控制' 檔中的一個欄位名稱。
+
+<解壓縮><連結> 和 <路徑> 不可相同<連結> 是指向 %s/<名稱> 的符號連結。
+（例如 /usr/bin/pager）
+<名稱> 是這個連結群組的主要名稱。
+（例如 pager）
+<路徑> 是某個可替換指令所指向的檔案位置。
+（例如 /usr/bin/less）
+<優先等級> 是整數，在自動模式下，數字越高越優先。
+
+<套件的狀態及進展的檔案重導><標準錯誤><標準輸入><標準輸出>增加 '%s'
+允許安裝相衝的討件選項 %s 不能用，替代項目 %s 不變。永遠安裝缺的設定檔永遠採用新的設定檔，不另行詢問永遠採用舊的設定檔，不另行詢問另外一個程序寫入鎖定資料庫，可能正在異動資料。
+接下來某些問題可能和此有關。
+硬體平台驗証 %s ...
+子命令：
+  --add <擁有者> <群組> <模式> <路徑>
+                           新增一個 <路徑> 項目至資料庫中。
+  --remove <路徑>          自資料庫移除 <路徑>。
+  --list [<glob式樣>]      列出目前資料庫中的覆載項目(overrides)。
+
+指令：
+  --check-supported                檢查執行中的 dpkg 有沒有支援觸發。
+
+指令:
+  --install <連結> <名稱> <路徑> <優先等級>
+    [--slave <連結> <名稱> <路徑>] ...
+                             新增一組替換指令到系統中。
+  --remove <名稱> <路徑>     從 <名稱> 替換群組中移除 <路徑>。
+  --remove-all <名稱>        由替換系統裡移除 <名稱> 群組。
+  --auto <名稱>              將 <名稱> 主要連結切換為自動模式。
+  --display <名稱>           顯示 <名稱> 群組的資訊。
+  --query <名稱>             --display <名稱> 供程式讀取的輸出版本
+  --list <名稱>              顯示所有 <名稱> 群組指向的程式。
+  --get-selections           列出主要替換名稱及狀態。
+  --set-selections           由標準輸入讀取替換狀態。
+  --config <名稱>            顯示 <名稱> 群組的替換指令，
+                             並讓使用者選擇要用哪一個。
+  --set <名稱> <路徑>        將 <路徑> 加入 <名稱> 可替換指令。
+  --all                      在所有的可替換指令上呼叫 --config。
+
+指令：
+  -s|--split <檔案> [<前綴>]       切割套件檔。
+  -j|--join <分割檔> <分割檔> ...  結合分割檔。
+  -I|--info <分割檔> ...           顯示某個分割檔的資訊。
+  -a|--auto -o <結合檔> <分割檔>   自動結合分割檔。
+  -l|--listq                       列出不相符的部份。
+  -d|--discard [<檔名> ...]        捨棄不相符的部份。
+
+命令：
+  [--add] <檔案>           新增移轉檔案。
+  --remove <檔案>          刪除移轉檔案。
+  --list [<比對表達式>]    顯示移轉檔案。
+  --listpackage <檔案>     顯示移轉檔案的套件。
+  --truename <檔案>        傳回移轉檔案的原檔名。
+
+--compare-versions 的比較運算子：
+  lt le eq ne ge gt       （無版號時，視為最舊版）；
+  lt-nl le-nl ge-nl gt-nl （無版號時，視為最新版）；
+  < << <= = >= >> >       （相容於控制檔的語法專用）。
+
+「%s」設定檔
+「%s」設定檔（實際上是「%s」）
+設定和這個套件有關的所有套件正在解除設定 %s (%s)……
+正在解除設定 %s (%s)，以便移除 %s (%s)……
+Debian %s 套件管理程式查詢工具版本 %s。
+Debian %s 套件觸發程式工具 %s 版。
+Debian %s 版本 %s。
+Debian「%s」套件封存檔後端版本 %s。
+Debian `%s' 套件管理程式版本%s。
+Debian `%s' 套件切割/重組工具﹔版本 %s。
+已刪除 %s。
+相依和衝突關係簡介要求=U:未知/I:安裝/R:刪除/P:清除/H:保留
+| 狀態=N:未安裝/I:已安裝/C:設定檔/U:已解開/F:半設定/H:半安裝/W:待觸發/T:未觸發
+|/ 錯誤?=(無)/R:須重新安裝（狀態，錯誤：大寫=有問題）
+解壓縮時，不執行安全輸出入操作處理時發生錯誤：
+結束狀態碼：
+  0 = 正確
+  1 = --auto 時，檔案不是分割檔
+  2 = 錯誤
+檔案 `%.250s' 並非套件檔中的一個分割檔。
+格式語法：
+  『格式』是指輸出套件資訊時用的字串。可以加上標準跳脫字元如 \n（換行）、
+  \r（歸位）或 \\（反斜線）。可在套件欄位中，使用 ${var[;width]} 語法，
+  加入套件資訊。欄位向右對齊，若要向左對齊，寬度請設為負的。
+普通的輔助進度資料忽略刪除共享移轉檔案 '%s' 的要求。
+忽略重新命名移轉套件 '%2$s' 檔案 '%1$s' 的要求
+更新了 %d 個套件的相關資訊。
+數量極大的超詳盡資訊就算套件驗證失敗，也還是安裝即使會破壞其它套件，也要安裝安裝新版的設定檔 %s ...
+維護者程式的執行及狀態在暫存目錄中留下了一些多餘檔案：
+不異動 '%s'
+詳細顯示相依和衝突關係大量的瑣碎細節，如 dpkg/info 目錄詳細顯示每個設定檔詳細顯示每個處理的檔案詳細顯示觸發程式相關訊息「%.*s」欄位名稱中有 MSDOS 檔案結尾標記(^Z)「%.*s」欄位的值之中有 MSDOS 檔案結尾標記(^Z)（沒有換行？）在此次執行中，同時解開了套件 %s 的多個副本！
+ 但只會設定一次。
+名稱查無移轉項目 '%s'，無可刪除。
+注意：root 的 PATH 通常都包括 /usr/local/sbin、/usr/sbin 和 /sbin無可設定。即使沒有新設定檔，也詢要問不要取代舊設定檔選項：
+  --admindir=<目錄>                以 <目錄> 取代 %s。
+  --by-package=<套件>              強制觸發等待中的觸發程式
+                                   （通常由 dpkg 設定）。
+  --await                          套件需要等待處理。
+  --no-await                       套件不用等待處理。
+  --no-act                         只是測試 - 不要真的有任何異動。
+
+選項：
+  --depotdir <目錄>                使用 <目錄> 代替 %s/%s。
+  -S|--partsize <大小>             單位為 KiB，用於 -s。（預設為 450）
+  -o|--output <檔案>               檔名，用於 -j。
+                                   （預設為 <套件名>_<版本>_<硬體平台>.deb）
+  -Q|--npquiet                     當 -a 不是分割檔時，不顯示訊息。
+  --msdos                          產生 8.3 的檔名。
+
+命令列選項：
+  -v, --verbose                    啟用冗餘的程式輸出。
+  -D, --debug                      啟用除錯資訊。
+      --showformat=<format>        於 --show 中使用其他的格式。
+      --deb-format=<format>        選擇封存檔格式
+                                     允許的值：0.939000, 2.0（預設值）。
+      --nocheck                    抑制住控制檔檢查
+                                     （用於故意製作損壞的套件）。
+      --root-owner-group           強制設定擁有者與擁有群組為 root。
+      --[no-]uniform-compression   在所有成員中使用相同的壓縮參數。
+  -z#                              設定建構套件時的壓縮層級。
+  -Z<壓縮方法>                     設定製作時的壓縮方法。
+                                     允許的壓縮方法：gzip、xz、none。
+  -S<策略>                         在建構套件時指定壓縮策略。
+                                     允許的值為：none、extreme (xz)、
+                                     filtered、huffman、rle、fixed (gzip)。
+
+顯示每個設定檔顯示每個處理的檔案用未移轉的檔案，取代移轉的檔案用一個套件的檔案，取代另外一個套件的檔案用一個套件的檔案，取代另一個套件的目錄PATH 中缺少重要程式，可能是問題沒有設定 PATH套件 %s 目前保留，不會去變動。用 --force-hold 來忽略該設定。
+套件 %s 被列出多次，但只會被處理一次。
+套件 `%s' 未含有任何檔案 (!)
+套件尚未結合完畢：
+已收集 %d 個套件 %s 的分割檔（尚需 路徑預先相依欄位正在準備解包 %s……
+按下 <enter> 鍵以保留目前選項[*]，或是輸入選擇編號：優先權即使套件沒有設硬體平台，或硬體平台有誤，也繼續進行即使套件版本錯誤，也繼續進行執行 %s (%s) 的觸發程式……
+錯誤太多，處理作業中斷。
+正在清除 %s (%s) 的設定檔……
+由 %2$d 個分割檔合成套件 %1$s：從 %2$s 獲得關於 %1$s 的記錄。
+移除核心套件移除需要安裝的套件正在移除 %s (%s)……
+刪除 '%s'
+把套件換成舊版用 %s 取代可用套件資訊。
+正在替換 %s (%s) 舊套件的檔案……
+選取了原先未選的套件 %s。
+選項設定所有強制選項設定 %s (%s) ...
+超詳細顯示觸發程式相關訊息忽略無效的行：%s略過未知的替代項目 %s。略過未選的套件 %s。
+把套件 %s 分成 %d 個分割檔：狀態以下套件正等待執行其它套件啟動的觸發程式。
+可以用 dselect 或 dpkg --configure --pending（或 dpkg --triggers-only）
+來執行觸發程式：
+下列套件因為安裝時發生嚴重問題，現在一片混亂。
+要正常運作，請重新重新安裝這些套件（及所有相依於它們的套件）：
+以下套件在資料庫中缺清單控制檔，
+需重新安裝：
+以下套件在資料庫中缺 md5sums 控制檔，
+需重新安裝：
+下列套件只完成一半的設定，可能是因為第一次設定時出了問題。
+可使用 dpkg --configure <套件> 或者由 dselect 選單中的 configure 項目來
+重新設定套件：
+下列套件因為安裝時出問題，只完成一半安裝。再試一次或許可以完成安裝；
+或用 dselect 或 dpkg --remove 移除：
+以下套件沒有硬體平台：
+以下套件有不合法的異質硬體平台：
+下列套件有未知的異質硬體平台，會在前端造成相依性問題。
+只要以 dpkg --add-architecture 註冊異質硬體平台，即可解決：
+以下套件的觸發程式已觸發，但觸發程式尚未執行。
+可以用 dselect 或 dpkg --configure --pending（或 dpkg --triggers-only）
+來執行觸發程式：
+下列套件已經解開，但尚未設定。要正常運作，
+請用 dpkg --configure 或者 dselect 選單中的 configure 項目設定：
+替代項目 %2$s（提供 %3$s）有 %1$d 個選擇。沒有程式有提供 %s。替換群組 %s（提供 %s）只有一個替換項目：%s這是自由軟體﹔軟體複製的授權條款，請參閱 GNU 通用公用許可證
+第二版或更新的版本。本軟體【不】提供任何保証。
+觸發程式的觸發和執行即使不是 root，也試著安裝（解安裝）把所有相依問題當作警告把所有相依版本問題當作警告完成後，請輸入 `exit'。
+輸入 dpkg --help 以參閱安裝和移除套件的說明 [*]；
+使用 `apt' 或 `aptitude'，用友善的界面管理套件；
+輸入 dpkg -Dhelp 以取得 dpkg 除錯旗標值的清單；
+輸入 dpkg --force-help 以取得強制選項的清單；
+輸入 dpkg-deb --help，以取得操作 *.deb 檔的說明；
+
+標示有 [*] 的選項會輸出大量文字 - 將其重導向至 less 或 more！輸入 dpkg-deb --help 以取得如何操作 *.deb 檔的說明﹔
+輸入 dpkg --help 以取得如何安裝和移除套件的說明。輸入 dpkg-split --help 以取得說明。輸入 dpkg-trigger --help 以取得這個工具的說明。用 %s 更新可用套件的資訊。
+用法：%s [<選項> ...] <命令>
+
+請用「%s --help」命令以參閱程式使用相關資訊。請用 --help，參閱檔案移轉的說明。請用 --help，參閱忽略檔案資訊的說明。請用 --help，參閱查詢套件的說明。若有新設定檔，則用預設選項，不再詢問。若沒有預設選項，
+除非有設定 confold 或 confnew 選項，否則會詢問你版本支援 %s 的 dpkg 版本尚未設定。
+ 請執行 'dpkg --configure dpkg'，然後再試一次。
+在新增時，預設為 --local 及 --divert <原始檔>.distrib。
+在移除時，指定 --package 或 --local 及 --divert 須相符。
+套件的 preinst/postrm scripts 一定要指定 --package 及 --divert。
+[預設=N][預設=Y][無預設值]為使 dpkg 正常執行， admindir 須在 instdir 下同時設定 '%s'（應 '%s' 要求）找不到 %2$s 連結群組的替換項目 %1$s 的替換項目；由替換清單中移除替換項目 %s 是 %s 的次要項目，無法設為主項目替換項目 %s 不可以是 %s 的子項目：它是主要替換項目替換項目 %1$s 是 %3$s 的次要項目，無法設為 %2$s 的次要項目%2$s 的替換項目 %1$s 未註冊，不加刪除%2$s 的替換項目 %1$s 沒有註冊，無可設定替換項目 %s 已由 %s 管理替換項目 %1$s 已由 %3$s 的次要項目 %2$s 管理替換連結路徑不是絕對路徑，應為絕對路徑：%s替換名稱 (%s) 不可包含 '/' 及空白替換項目路徑不是絕對路徑，應為絕對路徑：%s套件名稱 '%s' 曖昧不明，符合多個已安裝套件設定了 '%s' 的優先選項，但加上 --force 後，會被忽略已設定了 '%s' 的強制選項，放棄任一 %s 的移轉任一由 %s 移轉至 %ssar 壓縮檔中檔案的檔名 '%s' 太長了ar 壓縮檔中檔案的大小 %jd 太大了<無><未知>不合法的硬體平台 '%s'：%s硬體平台 '%s' 已預留，無法新增壓縮檔 '%.250s' 有兩個控制成員，放棄執行壓縮檔包含物件 `%.255s'，型別 0x%x 不名壓縮檔控制成員大小壓縮檔格式版號無效：%s壓縮檔的控制成員大小 '%s' 格式混亂壓縮檔檔案標頭中沒有換行壓縮檔資訊標頭成員壓縮檔格式版號 %d.%d，請升級 dpkg-deb壓縮檔識別版號壓縮檔成員標頭壓縮分割號壓縮檔切點壓縮分割號壓縮檔完整大小自動模式%s/%s 的自動更新已停用，不做異動正要執行另一個套件的觸發程式欄位 '%.*s' 的值中有空白行由於移除或安裝失敗而毀損了由於 postinst 出錯而毀損了無法安裝未知的選項 %s無法 mmap 套件的 info 檔 `%.255s'無法刪除原有的 postrm script無法取得套件的 info 檔 `%.255s' 的檔案資訊無法在壓縮檔 '%2$s' 中加上檔案 (%1$s)：%3$s無法把套件分割 '%s' 加到 '%s' 上：%s無法加到 '%s'無法關閉解壓縮的輸出轉向無法計算 '%s' 的 MD5 雜湊值：%s無法計算 tar 檔 '%.255s' 的 MD5 雜湊值：%s無法將 '%s' 複製到壓縮檔 '%s' 中：%s無法把檔案 '%s' 複製到 '%s'：%s無法將壓縮檔成員 '%s' 解壓縮到輸出轉向上：%s無法將 '%.255s' 的解壓縮資料複製到 '%.250s'：%s無法移轉檔案 '%s' 到自己無法由 '%2$s' 讀取設定檔 '%1$s'：%3$s無法解壓縮套件分割 '%s'：%s無法開啟 `%.255s'（位於 `%.255s'）無法開啟套件檔的分割檔 `%.250s'無法開啟「%.255s」目錄無法讀取 info 目錄無法刪除 `%.250s'無法移除資料庫正在使用的 '%s' 硬體平台無法移除非異質硬體平台 '%s'無法刪除原有的設定檔備份 `%.250s'（`%.250s' 的）無法刪除原有的設定檔 `%.250s' (= `%.250s' )無法刪除原有的檔案列表無法把 '%s' 重新命名為 '%s'無法滿足 %.250s 的預先相依關係（應 %.250s 之要求）無法掃瞄目錄 `%.255s'無法掃描更新目錄 `%.255s'無法推測該如何滿足預先相依關係：
+ %s無法在 '%s' 中，跳過壓縮檔控制成員：%s無法在 '%s' 中，跳過壓縮檔成員：%s無法由輸入轉向中，跳過檔案 '%.255s'（取代或排除掉了？）：%s無法跳過 '%.255s' 檔尾的空白：%s無法跳過 '%s' 的分割套件標頭：%s無法取得 `%.255s' 的檔案資訊（於 `%.255s'）無法取得檔案 '%s' 的檔案資訊無法取得「%s」路徑的資訊無法由 dpkg-deb 截掉可能的檔尾 0：%s不可有字元 `%c'（只能用英文字母、數字和字元 `%s'）壓縮資料損毀在套件裡沒有找到 conffile `%.250s'無法取得 conffile `%.50s' 的狀態conffile '%s' 不是普通檔案conffile 差異顯示程式conffile 檔名 '%s' 的結尾有空白字元conffile 檔名 '%s' 已重複conffile 命令列設定錯誤：%s:%d: %s相互衝突的操作 -%c (--%s) 和 -%c (--%s)移轉衝突，涉入其中的有 `%.250s' 及 `%.250s'套件衝突 - 不會安裝 %.250s正打算清除 %s 的設定，因為會被 %s 破壞...正打算清除核心套件 %s
+ 的設定，以啟用 %s為了 %2$s，正打算移除 %1$s ...控制目錄的權限為 %03lo 並不正確（必須 >=0755 且 <=0755）控制目錄所在不是目錄查無控制檔 '%s'控制檔包含 %c控制成員資訊資料庫格式檔 '%s' 損毀無法開啟日誌 '%s'：%s無法取得舊檔 '%.250s' 的檔案資訊，所以不會刪除：%s無法開啟 `%i' 讀取資料串流%1$s 的替換項目不明，切換為 %3$s 連結群組的 %2$s在處理觸發時發生循環：
+ 可能造成問題的連瑣套件：資料成員相依問題 - 保留未設定相依問題 - 不會移除因相依問題，無法設定 %s：
+%s由於相依上的問題，不能移除 %s：
+%s捨棄作廢的次要項目連結 %s (%s)%s 移轉自：%s
+%s 移轉至：%s
+由 %2$s 移轉 %1$s由 %3$s 移轉 %1$s 至 %2$s<移轉目標> 不該包含換行符號被 %s 移轉到：%s
+完成
+將 %.250s 從 %.250s 降級到 %.250s記錄中未安裝 dpkg，無法檢查是否支援 %s ！
+重複的正要執行的觸發程式套件 `%.255s'檔名 `%.250s' 和套件 `%.250s' 的檔案觸發條件重複重複的路徑 %s重複的待執行觸發程式 `%.255s'次要項目 %s 連結重複次要項目 %s 名稱重複有多個值對應至 `%s' 欄位有多個值對應至用戶自定的欄位 `%.*s'在以 fgets 讀取 conffile 時，傳回了空字串觸發程式的名稱不可為空的「%.*s」欄位名稱後有檔案結尾標記(end of file)「%.*s」欄位的值前面有檔案結尾標記(end of file)（缺少最末的換行）讀取「%.*s」欄位的值時遇到檔案結尾標記（缺少最末的換行）epoch 時間版本號中的 epoch 值是空的版本中的 epoch 是負數版本中的 epoch 不是數字版本中的 epoch 太大錯誤檢查 '%s' 時發生錯誤在關閉 %.250s 時發生錯誤關閉設定檔 `%.255s' 時發生錯誤在關閉/寫入 `%.255s' 時發生錯誤在建立裝置檔 `%.255s' 時發生錯誤在建立目錄 `%.255s' 時發生錯誤在建立實體連結 `%.255s' 時發生錯誤建立新備份檔發生錯誤 '%s'在建立輸出入轉向 `%.255s' 時發生錯誤在建立符號連結 `%.255s' 時發生錯誤在確保檔案 `%.250s' 是否存在時發生錯誤無法執行觸發指令 '%s'，結束狀態碼 %d將字串格式化存入 varbuf 變數時，發生錯誤顯示格式錯誤：%s安裝新檔發生錯誤 '%s'在開啟 conffile 檔時發生錯誤開啟設定目錄 '%s' 時發生錯誤在讀取 %.250s 時發生錯誤無法從檔案 %2$.255s 讀取 %1$s在讀取 conffile 檔時發生錯誤由 dpkg-deb 的輸入轉向讀取資料時，發生錯誤在讀取「%.250s」觸發程式延遲檔時發生錯誤刪除舊備份檔發生錯誤 '%s'在替 `%.255s' 設定所有權時發生錯誤在替符號連結 `%.255s' 設定所有權時發生錯誤在替 `%.255s' 設定權限時發生錯誤在替 `%.255s' 設定時間戳記時發生錯誤在試圖開啟 %.250s 時發生錯誤錯誤，無法捕捉到的訊號 %s：%s
+在清理時發生錯誤'%s' 寫入錯誤`%s' 寫入錯誤'%s' 寫入錯誤寫入硬體平台清單時，寫入錯誤在 conffile 提示輸入之前，發現寫入 stderr 錯誤無法配置記憶體新增項目到失敗套件清單時，無法配置記憶體：%s無法 chdir 到 `%.255s'無法切換到目錄無法 chroot 至 `%.250s'讀取後無法關閉：`%.255s'無法建立目錄無法建立輸出入轉向無法替 fd %d dup無法替 std%s dup無法 fstat 取得 ar 壓縮檔中檔案 (%s) 的檔案資訊無法以 fstat 取得壓縮檔的檔案資訊無法 fstat 取得移轉檔的檔案資訊無法 fstat statoverride 檔無法建立暫時工作檔 (%s)無法開啟設定檔 '%.255s' 來讀：%s無法開啟移轉檔無法開啟套件 info 檔 `%.255s' 以讀取無法開啟 statoverride 檔無法開啟觸發條件檔 `%.250s'讀取錯誤無法讀取 `%.255s'（位於 `%.255s'）無法讀取「%.255s」封存檔無法刪除合併後的更新檔 %.255s無法刪除自己的更新檔 %.255s無法跳到暫時工作檔的開頭 (%s)無法回到觸發條件檔 `%.250s' 的開頭移動讀寫頭錯誤無法取得（反引用）已存在的符號連結 `%.250s' 的檔案資訊無法取得（反引用）將要指向新符號連結 `%.250s' 的符號連結 `%.250s' 的檔案資訊無法取得暫時工作檔 (%s) 的檔案資訊無法刪除暫時工作檔 (%s)，%s寫入錯誤無法寫入關於 '%2$.50s' 到 '%3$.250s' 的%1$s資料庫記錄無法將 `%.50s' 的詳盡資訊寫入 `%.250s'無法寫入檔名到 tar 的輸出入轉向 (%s)fgets 從 `%.250s' 取得了一個空字串欄位名稱 `%.*s' 之後必須有個冒號欄位寬度超出範圍檔案 '%.250s' 的格式版本無效：%s檔案 `%.250s' 已損毀 - 沒有 %.250s檔案 `%.250s' 損毀 - MD5 檢碼 `%.250s' 錯誤檔案 '%.250s' 損毀 - 壓縮標頭識別碼錯誤檔案 '%.250s' 已損毀 - 壓縮分割號錯誤檔案 `%1$.250s' 已損毀 - 在 %3$s 中有無效數字（代碼為 %2$d）檔案 `%.250s' 已損毀 - 在第一個檔案標頭的末尾有不正確的識別碼檔案 `%.250s' 損毀 - 第二個標頭檔尾的識別碼錯誤檔案 '%.250s' 已損毀 - 壓縮分割數錯誤檔案 `%.250s' 已損毀 - 不合宜的填充字元（代碼 %d）檔案 `%.250s' 已損毀 - 在 %.250s 後沒有換行符號檔案 '%.250s' 損毀 - 壓縮分割號間沒有斜線檔案 `%.250s' 已損毀 - 資訊區段中有 null檔案 `%.250s' 損毀 - 第二個成員不是資料成員檔案 `%.250s' 損毀 - 該分割號的大小錯誤檔案 `%.250s' 損毀 - 檔案太小檔案 `%.250s' 損毀 - 該單位大小產生的分割數不符檔案 '%.250s' 的格式版本為 %d.%d：請升級 dpkg-split檔案 `%.250s' 不是壓縮分割檔檔案 '%s' 已損毀 - %s 的整數超過範圍檔案 `%s' 不是壓縮分割檔
+無法辨識檔案格式檔案很像壓縮檔，
+但因為以文字模式下載而損毀檔案不該包含換行符號檔案觸發記錄中，包含不合法的套件名稱 `%.250s'（在檔案 `%.250s' 的觸發條件裡）：%.250s檔名 "%s" 不是唯一的檔案 `%.250s' 和 `%.250s' 並不同屬一個檔案的分割檔套件 `%.250s' 的檔案清單，內有空檔名套件 '%.250s' 的檔案清單，檔尾沒有換行找不到套件 '%.250s' 的檔案清單，假設該套件目前安裝任何檔案連結群組 %2$s 損壞，強制重新安裝替換項目 %1$sfork 失敗版本格式結尾是亂碼版本格式中缺點 (.) 號版本版號版本格式中缺主版本版本格式中缺次版本格式版本中的主版本號太大格式版本中的次版本號太大'%s' 產生的 ar 檔頭損毀檔頭太長，分段分太多。套件名稱或版本號碼
+太長了之類的。放棄執行忽略 %d 個有關控制檔的警告忽略損壞，將強制繼續安裝！忽略衝突，強制繼續安裝！忽略 %s 的相依問題：
+%s忽視預先相依問題！忽略移除 %.250s 的要求，它並未安裝忽略移除 %.250s 的要求，它在系統中只剩設定檔。
+ 請用 --purge 一併刪除設定檔在描述資料 '%s:%s' 裡有不合法的硬體平台名稱：%s不合法的等待套件名稱 '%.250s'：%.250s在第 %d 行有非法的套件名稱：%.250s在正要執行的觸發程式 `%.255s' 裡有不合法的套件名稱：%s在描述資料 '%s%s%s' 裡有不合法的套件名稱：%s不合法的待執行觸發程式名稱 `%.255s': %s%.250s 的安裝作業安裝完畢安裝 %.250s 將會毀損 %.250s，
+ 且不打算要清除設定（--auto-deconfigure 也許有用）安裝 %.250s 將會毀損現有的軟體內部錯誤內部錯誤 (bug)壓縮檔 '%2$.250s' 中，大小 '%3$.16s' 的檔案，檔名有不合法的字元 '%1$c'欄位寬度中有無效的字元 '%c'修訂版號含不合法的字元版本號含不合法的字元-%c 的壓縮等級無效：%ld'壓縮參數無效：%s無效的deb格式版本：%s-%c 的整數無效：'%.250s'--%s 所指定的數字無效：`%.250s'觸發名稱 `%.250s' 語法不正確或未知（在套件 `%.250s' 的觸發條件中）無效的「%.250s」套件名稱位於「%.250s」觸發程式延遲檔狀態無效不正確的觸發程式名稱 `%.250s'：%.250s讀取 %s 時，行沒有結束讀取 %s 時，行太長或沒有結束連結 %s 同時是主要及次要自行移轉自：%s
+%s 自行移轉%s 自行移轉至 %s自行移轉至：%s
+自行移轉至：%s
+長檔名維護者程式 `%.50s' 的權限 %03lo 有問題（必須 >=0555 且 <=0775）維護者程式 `%.50s' 不是普通檔案或符號連結無法取得維護者程式 `%.50s' 的狀態malloc 失敗（%zu 位元組）手動模式主檔案主連結移除 %s 會出問題，因為它提供了 %s ...不可以是空字串記憶體使用超限<移轉目標> 不符，
+  在移除 `%s' 時
+  發現 `%s'<套件> 不符，
+  在移除 `%s' 時
+  發現 `%s'找不到結尾括弧存在混合了可以同時安裝與不可以同時安裝的套件實體；這通常是因為 dpkg 升級自一個非官方的版本多硬體平台很多衝突、取代存在多個無法同時安裝的套件；這通常是因為 dpkg 升級自一個非官方的版本檔案 '%.250s' 有好幾個 statoverride 檔須由維護者程式（或以 --by-package 選項）呼叫必須以英數字開頭必須以英數字開頭名稱 %s 同時是主要及次要欠缺操作選項欄位名稱 `%.*s' 中有換行在 update-alternatives 檔 (%s) 裡不可有換行符號在控制資訊封存檔中沒有「control」檔案！沒有 %s 的替換檔沒有設定強制選項在 `%.255s' 中沒有套件的相關資訊未曾安裝名為 `%s' 的套件，無法設定找不到符合 %s 的套件找不到符合 %s 的路徑不行，%s 是核心套件，
+不會為了啟用 %s 而清除它的設定不行，無法繼續 %s（試試 --auto-deconfigure）：
+%s不檢查控制區的內容未安裝未被安裝，但卻留有設定檔%s 不是符號連結，不會刪除不會把 %s 換成連結版本號的冒號後面沒有東西在 --%s 的逗號分隔清單 '%.250s' 中，有空的套件名稱壓縮分割數已作廢的 '--%s' 選項：無法安裝的套件會自動清除「%s」為以棄用的壓縮類型，請改用 xz「%s」為已棄用之壓縮類型；請改用 xz 或是 gzip已作廢之「--%s」命令列選項舊的 conffile '%.250s' 是空目錄（現已刪除）舊檔 '%.250s' 與幾個新檔案相同！（'%.250s' 和 '%.250s'）舊版套件中包含檔名太長的資訊檔，開頭為 `%.250s'在「%s」欄位中只能使用明確的版本號在開啟元件 `%.255s'（位於 %.255s）時以意想不到的方式失敗了記憶體不足，無法建立新的清理項目記憶體不足，無法建立多參數的新清理項目記憶體不足，無法建立錯誤相關資料非處於錯誤情境中，中止程序使用了 --force 選項，忽略問題：套件 %.250s 已安裝並設定完成套件 %.250s 還無法設定
+ 不能設定（目前狀態 `%.250s'）套件 %.250s 還無法處理觸發程式
+（目前的狀態為 `%.250s'，沒有待處理的觸發程式）%3$s 版本 (%4$s) 不同，套件 %1$s %2$s 無法設定%2$s 尚未準備好（目前的狀態為 '%3$s'），套件 %1$s 無法設定套件 %s 包含作為資訊檔的清單套件 %s 需要重新安裝，但還是應您的要求將其強制移除套件 %s 需要重新安裝，不會移除套件 %s 原本保留，應您的要求強制繼續處理無法取得套件 '%s'套件 '%s' 未安裝套件 '%s' 未安裝，無法取得其資訊套件硬體平台套件的系統平台 (%s) 與本機系統 (%s) 不符套件包含了檔名太長的控制資訊檔（其開頭為 `%.250s'）套件的控制資訊中包含了目錄 `%.250s'套件控制資訊中刪除目錄 '%.250s'，但沒有說這不是目錄解開套件控制資訊套件將其它的移轉至：%s
+取得套件欄位值套件檔 MD5 檢碼套件檔案系統壓縮檔解壓縮套件的狀態為 %s 但觸發程式正要執行套件的狀態為 %s 但觸發程式尚待執行<套件> 不該包含換行符號套件名稱套件的名字含有不是英數字或 `-+.' 的字元套件簽名驗證套件版號缺少第 %d 個分割檔分割檔 `%.250s' 並非一般檔案分割檔的大小已遠遠過長或非正數分割檔大小至少要有 %d KiB（以便儲存標頭資訊）通過
+貼上預先相依問題 - 不會安裝 %.250s優先權優先權數值超出範圍優先權必須為整數%s 的優先權超出範圍：%s%s 的優先權：%s在 %.250s 中發生讀取錯誤在 `%.250s' 中讀取錯誤設定檔 `%.255s' 讀取錯誤從標準輸入讀取資料時發生錯誤在 conffile 提示輸入時，發現讀取 stdin 錯誤讀取套件 info 檔 '%.255s'正在讀取套件的 info 檔「%s」：%s讀取 statoverride 檔 '%.250s'重新組裝成的套件檔包含 %2$s 的 %1$s 中的預先相依問題：
+%3$s關於包含 %2$s 的 %1$s：
+%3$s%.250s 的移除作業移除資料庫正在使用的 '%s' 硬體平台移除手選的替代項目 - 將 %s 切為自動模式重新命名時，會以另一個檔案 `%2$s'
+  蓋過 `%1$s'，所以不可以進行重新命名：刪除重複的舊連結 '%s'該操作需要超級使用者權限修訂號是空的rm 指令刪除檔案已搜尋，但是找不到套件（符合 *.deb 的檔案）<未知>設定 %s 的自動選擇找到了多個套件的 info 項目，但只能有一個搬移檔案的 shell 指令找不到連結群組 %3$s 中相對的檔案 %2$s ，略過 %1$s次要項目檔案次要項目連結 %s次要項目連結與主連結 %s 相同次要項目名稱來源檔 `%.250s' 並非一般檔案切分套件重組statoverride 檔有空行statoverride 檔檔尾沒有換行狀態狀態記錄器除去結尾的 /子程序 %s 傳回了錯誤退出狀態 %d符號連結 '%.250s' 的大小由 %jd 變為 %zd在 file trigger 檔 `%.255s' 裡的語法有誤statoverride 檔語法錯誤「%.250s」觸發程式延遲檔中的第 %d 行第 %zd 字元「%s」有語法錯誤需要一個參數：觸發程式名稱目的地是目錄 - 無法略過控制檔檢查第 %d 個分割檔有好幾個版本 - 至少有 `%.250s' 和 `%.250s'新版本的套件裡沒有 script - 放棄執行若要回復成自動更新，請執行 '%s --auto %s'錯誤太多，停止執行在錯誤回復時發生了太多層的錯誤在 `%.250s' 裡的文字太長，或少了換行符號目錄樹遊走(treewalk)的根節點「%s」不是個目錄觸發條件檔 `%.250s' 的語法有誤；不合法的套件名稱 `%.250s'：%.250s觸發程式的名稱包含了不合法的字元還沒有觸發記錄已觸發觸發程式 ci 檔 `%.250s' 的觸發程式名稱 `%.250s' 不合於觸發程式的語法：%.250s觸發程式 ci 檔包含了未知的指令 `%.250s'觸發程式 ci 檔包含了未知的指令語法還沒建立觸發資料目錄觸發程式陷入迴圈，已放棄執行試著改用新套件的 script ...正要取代 '%.250s'，它也是套件 %.250s %.250s 的檔案試圖覆蓋 `%.250s'，它是 `%.250s' 移轉後的版本試圖覆蓋 `%.250s'，它是 `%.250s'（套件：%.100s）移轉後的版本正要用套件 %2$.250s %3$.250s 裡一個普通檔案，取代目錄 '%1$.250s'正要覆蓋共用檔 '%.250s'，它是套件 %.250s 的另一個不同檔案指定了兩個指令：--%s 以及 --%s無法（重新）開啟做為輸入之用的分割檔 `%.250s'無法改變目標檔案 '%.250s' 的所有者無法判斷 `%.250s' 是否存在無法檢查檔案 '%s' 的鎖定狀態無法判斷壓縮檔 `%.250s' 是否存在無法 chown `%.255s' 的符號連結備份在安裝另一版本前，無法清理 `%.255s' 的混亂狀態無法關閉「%s」檔案無法關閉新檔 `%.250s'無法關閉新的觸發程式延遲檔「%.250s」無法關閉 `%.250s' 的更新狀態無法建立「%.255s」處理 `%2$.255s' 時，無法產生 `%1$.255s'無法建立檔案 '%s'無法開新檔案 '%.250s'無法建立暫時工作目錄無法建立觸發程式狀態目錄 `%.250s'無法刪除控制資訊檔 `%.250s'無法刪除舊目錄 '%.250s'：%s無法刪除用畢的暫存檔 `%.250s'無法忽略 `%.250s'執行 %s 錯誤 (%s)無法用填料填滿 %.250s在填充後無法刷新 %.250s無法清除檔案 '%s' 的寫入緩衝無法清除新檔的寫入緩衝 '%.250s'無法刷新 `%.250s' 的更新狀態無法 fstat 取得來源檔的檔案資訊無法 fsync 同步 `%.250s' 更新狀態的寫入緩衝無法由 '%s' 目錄取得檔案描述無法在執行 %2$.250s 前，忽略信號 %1$s無法將 `%.250s' 安裝為 `%.250s'無法安裝（應該是）新的資訊檔 `%.250s'無法把新的資訊檔 `%.250s' 安裝為 `%.250s'無法安裝新的觸發程式延遲檔「%.250s」無法安裝 `%.255s' 的新版本無法安裝 `%.250s' 的更新狀態無法鎖定 %s無法在安裝新的版本前，為 `%.255s' 做一個符號連結備份無法替 `%.255s' 做一個符號連結備份無法將 `%.255s' 移開以安裝新的版本無法建立 '%.255s'無法開啟目錄 '%s'無法開啟檔案 '%s'無法開啟新的暫存檔 `%.250s'無法開啟輸出檔 `%.250s'無法開啟來源檔 `%.250s'無法開啟暫時的控制目錄無法開啟觸發程式 ci 檔 `%.250s'無法開啟「%.250s」觸發程式延遲檔無法開啟或建立新的觸發程式延遲檔「%.250s」無法讀取暫存目錄 `%.250s'無法讀取 file trigger 檔 `%.250s'無法讀取 %.250s 的檔案重導的設定無法讀取符號連結 `%.255s'無法讀取分割檔 `%.250s'無法刪除 '%s'無法刪除 '%.250s' 的備份檔無法刪除來源檔 '%.250s' 的複本無法移除 `%.250s' 的新解壓版本無法移除 `%.250s' 的新安裝版本無法移除 `%.250s' 的新安裝版本以便能重新以備份副本安裝無法移除作廢的資訊檔 `%.250s'無法將新的暫存檔 `%.250s' 重新命名為 `%.250s'無法重新開啟分割檔 `%.250s'無法回復為 `%.250s' 的備份版本無法安全刪除 '%.255s'無法安全刪除 '%.255s'無法安全刪除舊檔 '%.250s'：%s在填充後無法搜尋到 %.250s 的起始位置無法在%s資料庫檔案上設緩衝區無法在 %.250s 上設定 close-on-exec無法設定 `%.250s' 的執行權限無法設定目標檔案 '%.250s' 的權限無法為維護者程式設定環境變數無法為子程序設定環境變數無法取得 %s `%.250s' 的檔案資訊無法取得 %s '%.250s' 的檔案資訊：%s無法取得 `%.250s' 的檔案資訊無法取得控制目錄的檔案資訊無法取得現已安裝的 conffile `%.250s' 的檔案資訊無法取得新發佈的 conffile '%.250s' 的檔案資訊無法取得其它新檔 `%.250s' 的檔案資訊在安裝另一版本前，無法取得回復後的 `%.255s' 的檔案資訊無法取得來源檔 '%.250s' 的檔案資訊無法取得「%.250s」觸發程式延遲檔的資訊無法同步目錄 '%s' 的寫入緩衝無法同步檔案 '%.255s' 的寫入緩衝無法同步檔案 '%s' 的寫入緩衝無法同步新檔 '%.250s' 的寫入緩衝無法縮減 `%.250s' 的更新狀態無法解除鎖定 %s無法寫入檔案 '%s'無法寫入新檔 '%.250s'無法寫入新的觸發程式延遲檔「%.250s」無法寫到檔案描述 %d 上無法寫入 `%.250s' 的更新狀態'%s' 中左右引號不對稱bzip2 意外的錯誤在第 %d 行的套件及選擇項目之後有預期之外的資料在 %2$.255s 中的 %1$s 有預期之外的檔案結束符號檔案或資料串流意外結束讀取 %s 時檔案意外結束輸入意外結束在第 %d 行的套件名後意外地發現此行結束在第 %d 行的套件名稱中意外地發現此行結束statoverride 檔行尾意外中斷未知參數 `%s'壓縮方式不明壓縮方式 '%s' 不明！未知的壓縮類型 `%s'！未知的 deb 格式版本：「%s」未知的 force/refuse 選項 `%.*s'選項不明 '%s'未知的選項 -%c未知的選項 --%s在第 %d 行所得到的狀態不明：%.250s已被解開，但尚未設定無法回復的致命錯誤，中止程序壓梭設定不支援「%s」壓縮類型不適用於 uniform compression檔頭選項不支援完整性測試的類型不支援updates 目錄中的「%.250s」檔案名稱太長了（長度為 %d，最長能允許 %d）更新目錄中含有不同長度名稱的檔案（分別為 %d 和 %d）因為 %2$s 連結群組變更了從屬連結故正在更新 %1$s 替代方案查無「%s」使用者用戶自定的欄位名 `%.*s' 過短在自動模式下以 %1$s 來提供 %2$s (%3$s)在手動模式下以 %1$s 來提供 %2$s (%3$s)「%s」欄位的值存在格式錯誤之「%.*s」行在此情境中不能使用這個「%s」欄位的值套件 %s 沒有通過驗証！套件 %s 未通過驗証，但還是應您的要求強制安裝<無>已安裝 %.250s 版的 %.250s，略過「%s」版本號的語法不正確「%s」版本號的語法不正確：%s版本號開頭不是數字版本號是空的版本號裡嵌有空格字元版本號是空的等待「%s」子程序失敗等待子程序 %s 時失敗警告正在讀取 %s：%s移除 %.250s 時，目錄 '%.250s' 不是空的，不會刪除移除 %.250s 時，無法刪除目錄 '%.250s'：%s - 它是掛載點嗎？不會將 %.250s 從 %.250s 降級到 %.250s，略過好，會清除 %s 的設定（被 %s 破壞）好，會為了 %2$s 移除 %1$s您必須使用套件本身的名字，而不是直接引用完整的檔名
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/scripts/Build.PL dpkg-1.20.7.1/scripts/Build.PL
--- dpkg-1.20.7.1-orig/scripts/Build.PL	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/Build.PL	2021-06-09 18:24:51.962468333 -0500
@@ -0,0 +1,169 @@
+#!/usr/bin/perl
+
+use strict;
+use warnings;
+
+eval {
+    require Module::Build;
+} or do {
+    die "error: Missing Module::Build module, cannot proceed.\n";
+};
+
+if (-e 'Build.PL.in') {
+    die "error: This is an in-tree build, not a proper perl distribution.\n" .
+        "To create one please configure normally and then run 'make dist'.\n";
+}
+
+my $class = Module::Build->subclass(
+    class => 'Module::Build::Dpkg',
+    code => q{
+        require IPC::Cmd;
+
+        sub find_command {
+            my (@alts) = @_;
+
+            foreach my $cmd (@alts) {
+                my $pathname = IPC::Cmd::can_run($cmd);
+                return $pathname if defined $pathname;
+            }
+            die "error: cannot find any of @alts\n";
+        }
+
+        sub subst {
+            my ($self, $file) = @_;
+            my $path = $self->install_path();
+            my $version = $self->dist_version();
+
+            my $progmake = find_command(qw(gmake make));
+            my $progpatch = find_command(qw(gpatch patch));
+            my $progtar = find_command(qw(gtar tar));
+
+            unlink "blib/$file"
+                or die "error: cannot remove blib/$file: $!\n";
+            open my $fhin, '<', $file
+                or die "error: cannot open $file: $!\n";
+            open my $fhout, '>', "blib/$file"
+                or die "error: cannot create blib/$file: $!\n";
+            while (<$fhin>) {
+                s{our \$PROGVERSION = .*;}{our \$PROGVERSION = '$version';};
+                s{our \$PROGMAKE = .*;}{our \$PROGMAKE = '$progmake';};
+                s{our \$PROGPATCH = .*;}{our \$PROGPATCH = '$progpatch';};
+                s{our \$PROGTAR = .*;}{our \$PROGTAR = '$progtar';};
+                s{our \$CONFDIR = .*;}{our \$CONFDIR = '$path->{conf}';};
+                s{our \$DATADIR = .*;}{our \$DATADIR = '$path->{data}';};
+                s{our \$ADMINDIR = .*;}{our \$ADMINDIR = '$path->{admin}';};
+                s{our \$LIBDIR = .*;}{our \$LIBDIR = '$path->{libexec}';};
+                print { $fhout } $_;
+            }
+            close $fhout or die "error: cannot write blib/$file: $!\n";
+            close $fhin;
+        }
+
+        sub ACTION_build {
+            my $self = shift;
+
+            $self->SUPER::ACTION_build;
+            $self->subst('lib/Dpkg.pm');
+        }
+        sub ACTION_test {
+            my $self = shift;
+
+            local $ENV{LANG} = 'C';
+            local $ENV{LC_ALL} = 'C';
+            local $ENV{DPKG_TEST_MODE} = 'cpan';
+            local $ENV{DPKG_DATADIR} = 'data';
+            local $ENV{DPKG_ORIGINS_DIR} = 't/origins';
+            # To avoid requiring dpkg(1).
+            local $ENV{DEB_BUILD_ARCH} = 'amd64';
+            $self->SUPER::ACTION_test;
+        }
+    },
+);
+
+my $build = $class->new(
+    dist_name       => 'Dpkg',
+    dist_abstract   => 'Debian Package Manager Perl modules',
+    dist_version    => '1.20.7.1',
+    dist_author     => 'Dpkg Developers <debian-dpkg@lists.debian.org>',
+    license         => 'GPL_2',
+
+    release_status  => 1 ? 'stable' : 'testing',
+
+    # Set only to avoid warnings.
+    module_name     => 'Dpkg',
+
+    meta_merge => {
+        'meta-spec' => {
+            version => 2,
+        },
+        prereqs => {
+            configure => {
+                recommends => {
+                    'Module::Signature'     => 0,
+                },
+            },
+            test => {
+                recommends => {
+                    'Test::Pod'             => 0,
+                    'Test::Strict'          => 0,
+                },
+            },
+            develop => {
+                recommends => {
+                    'Test::MinimumVersion'  => 0,
+                    'Test::Perl::Critic'    => 0,
+                    'Test::Pod::Coverage'   => 0,
+                    'Test::Spelling'        => 0,
+                    'Test::Synopsis'        => 0,
+                },
+            },
+        },
+        resources => {
+            homepage => 'https://wiki.debian.org/Teams/Dpkg',
+            repository => {
+                type => 'git',
+                url => 'https://git.dpkg.org/git/dpkg/dpkg.git',
+                web => 'https://git.dpkg.org/cgit/dpkg/dpkg.git',
+            },
+            bugtracker => {
+                web => 'https://bugs.debian.org/src:dpkg',
+            },
+        },
+        keywords => [ qw(dpkg debian perl) ],
+    },
+
+    sign            => 1,
+    dynamic_config  => 0,
+
+    configure_requires => {
+        'Module::Build'         => '0.4004',
+    },
+    test_requires => {
+        'TAP::Harness'          => 0,
+        'Test::More'            => 0,
+    },
+    recommends => {
+        'Algorithm::Merge'      => 0,
+        'File::FcntlLock'       => 0,
+        'Locale::gettext'       => 0,
+
+    },
+    requires => {
+        'perl'                  => '5.24.1',
+    },
+
+    data_files => {
+        map { $_ => $_ } glob 'data/*'
+    },
+    install_path => {
+        conf => '/etc/dpkg',
+        data => '/usr/share/dpkg',
+        admin => '/var/lib/dpkg',
+        libexec => '/usr/lib/dpkg',
+    },
+);
+
+$build->add_build_element('data');
+$build->create_build_script();
+
+1;
diff -Naurp dpkg-1.20.7.1-orig/scripts/Makefile dpkg-1.20.7.1/scripts/Makefile
--- dpkg-1.20.7.1-orig/scripts/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/Makefile	2021-06-09 18:24:51.972468348 -0500
@@ -0,0 +1,1377 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# scripts/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# Variables to be defined:
+#
+#  TEST_VERBOSE - set to 0 (default) or 1 to control test suite verbosity
+#  TEST_PARALLEL - set to 1 (default) or N to control the parallel jobs
+#  TEST_ENV_VARS - environment variables to be set for the test suite
+#  TEST_COVERAGE - set to the perl module in charge of getting test coverage
+#  test_tmpdir - test suite temporary directory
+#  test_scripts - list of test case scripts
+#  test_programs - list of test case programs
+#  test_data - list of test data files
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+subdir = scripts
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(nobase_dist_perllib_DATA) \
+	$(nobase_dist_pkgdata_DATA) $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = Build.PL README.cpan
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" \
+	"$(DESTDIR)$(man3dir)" "$(DESTDIR)$(perllibdir)" \
+	"$(DESTDIR)$(pkgdatadir)"
+SCRIPTS = $(bin_SCRIPTS) $(sbin_SCRIPTS)
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+man3dir = $(mandir)/man3
+NROFF = nroff
+MANS = $(man3_MANS)
+DATA = $(nobase_dist_perllib_DATA) $(nobase_dist_pkgdata_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir distdir-am
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Build.PL.in $(srcdir)/Makefile.in \
+	$(srcdir)/README.cpan.in $(top_srcdir)/check.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump -w -f -p -T -R
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/scripts
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/scripts
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+SUBDIRS = mk po
+sbin_SCRIPTS = \
+	dpkg-fsys-usrunmess
+
+bin_SCRIPTS = \
+	dpkg-architecture \
+	dpkg-buildflags \
+	dpkg-buildpackage \
+	dpkg-checkbuilddeps \
+	dpkg-distaddfile \
+	dpkg-genbuildinfo \
+	dpkg-genchanges \
+	dpkg-gencontrol \
+	dpkg-gensymbols \
+	dpkg-maintscript-helper \
+	dpkg-mergechangelogs \
+	dpkg-name \
+	dpkg-parsechangelog \
+	dpkg-realpath \
+	dpkg-scanpackages \
+	dpkg-scansources \
+	dpkg-shlibdeps \
+	dpkg-source \
+	dpkg-vendor
+
+EXTRA_DIST = dpkg-architecture.pl dpkg-buildflags.pl \
+	dpkg-buildpackage.pl dpkg-checkbuilddeps.pl \
+	dpkg-distaddfile.pl dpkg-fsys-usrunmess.pl \
+	dpkg-genbuildinfo.pl dpkg-genchanges.pl dpkg-gencontrol.pl \
+	dpkg-gensymbols.pl dpkg-maintscript-helper.sh \
+	dpkg-mergechangelogs.pl dpkg-name.pl dpkg-parsechangelog.pl \
+	dpkg-realpath.sh dpkg-scanpackages.pl dpkg-scansources.pl \
+	dpkg-shlibdeps.pl dpkg-source.pl dpkg-vendor.pl \
+	$(test_scripts) $(test_data) Test/Dpkg.pm $(nil)
+nobase_dist_pkgdata_DATA = \
+	sh/dpkg-error.sh \
+	# EOL
+
+CLEANFILES = \
+	$(test_data_objects) \
+	$(sbin_SCRIPTS) \
+	$(bin_SCRIPTS)
+
+perllibdir = $(PERL_LIBDIR)
+nobase_dist_perllib_DATA = \
+	Dpkg/Arch.pm \
+	Dpkg/BuildFlags.pm \
+	Dpkg/BuildOptions.pm \
+	Dpkg/BuildProfiles.pm \
+	Dpkg/Build/Env.pm \
+	Dpkg/Build/Info.pm \
+	Dpkg/Build/Types.pm \
+	Dpkg/Changelog.pm \
+	Dpkg/Changelog/Debian.pm \
+	Dpkg/Changelog/Entry.pm \
+	Dpkg/Changelog/Entry/Debian.pm \
+	Dpkg/Changelog/Parse.pm \
+	Dpkg/Checksums.pm \
+	Dpkg/Compression.pm \
+	Dpkg/Compression/FileHandle.pm \
+	Dpkg/Compression/Process.pm \
+	Dpkg/Conf.pm \
+	Dpkg/Control.pm \
+	Dpkg/Control/Changelog.pm \
+	Dpkg/Control/FieldsCore.pm \
+	Dpkg/Control/Fields.pm \
+	Dpkg/Control/Info.pm \
+	Dpkg/Control/HashCore.pm \
+	Dpkg/Control/Hash.pm \
+	Dpkg/Control/Tests.pm \
+	Dpkg/Control/Tests/Entry.pm \
+	Dpkg/Control/Types.pm \
+	Dpkg/Deps.pm \
+	Dpkg/Deps/AND.pm \
+	Dpkg/Deps/KnownFacts.pm \
+	Dpkg/Deps/Multiple.pm \
+	Dpkg/Deps/OR.pm \
+	Dpkg/Deps/Simple.pm \
+	Dpkg/Deps/Union.pm \
+	Dpkg/Dist/Files.pm \
+	Dpkg/ErrorHandling.pm \
+	Dpkg/Exit.pm \
+	Dpkg/File.pm \
+	Dpkg/Getopt.pm \
+	Dpkg/Gettext.pm \
+	Dpkg/Index.pm \
+	Dpkg/Interface/Storable.pm \
+	Dpkg/IPC.pm \
+	Dpkg/Lock.pm \
+	Dpkg/OpenPGP.pm \
+	Dpkg/Package.pm \
+	Dpkg/Path.pm \
+	Dpkg/Shlibs.pm \
+	Dpkg/Shlibs/Objdump.pm \
+	Dpkg/Shlibs/Symbol.pm \
+	Dpkg/Shlibs/SymbolFile.pm \
+	Dpkg/Shlibs/Cppfilt.pm \
+	Dpkg/Source/Archive.pm \
+	Dpkg/Source/BinaryFiles.pm \
+	Dpkg/Source/Format.pm \
+	Dpkg/Source/Functions.pm \
+	Dpkg/Source/Package.pm \
+	Dpkg/Source/Package/V1.pm \
+	Dpkg/Source/Package/V2.pm \
+	Dpkg/Source/Package/V3/Bzr.pm \
+	Dpkg/Source/Package/V3/Custom.pm \
+	Dpkg/Source/Package/V3/Native.pm \
+	Dpkg/Source/Package/V3/Git.pm \
+	Dpkg/Source/Package/V3/Quilt.pm \
+	Dpkg/Source/Patch.pm \
+	Dpkg/Source/Quilt.pm \
+	Dpkg/Substvars.pm \
+	Dpkg/Vars.pm \
+	Dpkg/Vendor.pm \
+	Dpkg/Vendor/Debian.pm \
+	Dpkg/Vendor/Default.pm \
+	Dpkg/Vendor/Ubuntu.pm \
+	Dpkg/Version.pm \
+	Dpkg.pm
+
+
+# Keep it even if empty to have man3dir correctly set
+man3_MANS = 
+man_perl_section = 3perl
+do_perl_subst = $(AM_V_GEN) sed \
+	-e "s:^\#![[:space:]]*/usr/bin/perl:\#!$(PERL):" \
+	-e "s:our \$$CONFDIR = .*;:our \$$CONFDIR = '$(pkgconfdir)';:" \
+	-e "s:our \$$ADMINDIR = .*;:our \$$ADMINDIR = '$(admindir)';:" \
+	-e "s:our \$$LIBDIR = .*;:our \$$LIBDIR = '$(pkglibexecdir)';:" \
+	-e "s:our \$$DATADIR = .*;:our \$$DATADIR = '$(pkgdatadir)';:" \
+	-e "s:our \$$PROGMAKE = .*;:our \$$PROGMAKE = '$(MAKE)';:" \
+	-e "s:our \$$PROGTAR = .*;:our \$$PROGTAR = '$(TAR)';:" \
+	-e "s:our \$$PROGPATCH = .*;:our \$$PROGPATCH = '$(PATCH)';:" \
+	-e "s:our \$$PROGVERSION = .*;:our \$$PROGVERSION = '$(PACKAGE_VERSION)';:"
+
+do_shell_subst = $(AM_V_GEN) sed \
+	-e "s:^PKGDATADIR_DEFAULT=.*$$:PKGDATADIR_DEFAULT='$(pkgdatadir)':" \
+	-e "s:^version=['\"][^'\"]*[\"']:version=\"$(PACKAGE_VERSION)\":"
+
+SUFFIXES = .pl .sh
+TEST_ENV_VARS = \
+	DPKG_PROGTAR=$(TAR) \
+	DPKG_PROGPATCH=$(PATCH) \
+	DPKG_PROGMAKE=$(MAKE) \
+	DPKG_DATADIR=$(top_srcdir)/data \
+	DPKG_ORIGINS_DIR=$(srcdir)/t/origins
+
+TEST_COVERAGE = $(PERL_COVERAGE)
+test_tmpdir = t.tmp
+test_scripts = \
+	t/Dpkg_Version.t \
+	t/Dpkg_Arch.t \
+	t/Dpkg_Package.t \
+	t/Dpkg_Shlibs_Cppfilt.t \
+	t/Dpkg_Shlibs.t \
+	t/Dpkg_BuildFlags.t \
+	t/Dpkg_BuildFlags_Ubuntu.t \
+	t/Dpkg_BuildOptions.t \
+	t/Dpkg_BuildProfiles.t \
+	t/Dpkg_Build_Env.t \
+	t/Dpkg_Build_Info.t \
+	t/Dpkg_Build_Types.t \
+	t/Dpkg_Checksums.t \
+	t/Dpkg_ErrorHandling.t \
+	t/Dpkg_Exit.t \
+	t/Dpkg_File.t \
+	t/Dpkg_Lock.t \
+	t/Dpkg_Getopt.t \
+	t/Dpkg_Gettext.t \
+	t/Dpkg_Conf.t \
+	t/Dpkg_Deps.t \
+	t/Dpkg_Path.t \
+	t/Dpkg_Vars.t \
+	t/Dpkg_Interface_Storable.t \
+	t/Dpkg_OpenPGP.t \
+	t/Dpkg_Vendor.t \
+	t/Dpkg_Changelog.t \
+	t/Dpkg_Changelog_Ubuntu.t \
+	t/Dpkg_Control_Fields.t \
+	t/Dpkg_Control.t \
+	t/Dpkg_Control_Tests.t \
+	t/Dpkg_Index.t \
+	t/Dpkg_Substvars.t \
+	t/Dpkg_IPC.t \
+	t/Dpkg_Compression.t \
+	t/Dpkg_Source_Functions.t \
+	t/Dpkg_Source_Patch.t \
+	t/Dpkg_Source_Quilt.t \
+	t/Dpkg_Source_Format.t \
+	t/Dpkg_Source_Archive.t \
+	t/Dpkg_Source_Package.t \
+	t/Dpkg_Dist_Files.t \
+	t/dpkg_realpath.t \
+	t/dpkg_source.t \
+	t/dpkg_buildpackage.t \
+	t/merge_changelogs.t \
+	t/mk.t \
+	$(nil)
+
+test_data = \
+	t/Dpkg_OpenPGP/package_1.0.orig.tar \
+	t/Dpkg_OpenPGP/package_1.0.orig.tar.asc \
+	t/Dpkg_OpenPGP/package_1.0.orig.tar.sig \
+	t/Dpkg_Shlibs/symbols.internal \
+	t/Dpkg_Shlibs/symbols.internal-allow \
+	t/Dpkg_Shlibs/symbols.internal-allow-groups \
+	t/Dpkg_Shlibs/symbols.internal-filter \
+	t/Dpkg_Shlibs/symbols.fake-1 \
+	t/Dpkg_Shlibs/symbols.fake-2 \
+	t/Dpkg_Shlibs/symbols.fake-3 \
+	t/Dpkg_Shlibs/symbols.include-1 \
+	t/Dpkg_Shlibs/symbols.include-2 \
+	t/Dpkg_Shlibs/symbols.include-3 \
+	t/Dpkg_Shlibs/basictags.symbols \
+	t/Dpkg_Shlibs/basictags.c \
+	t/Dpkg_Shlibs/patterns.symbols \
+	t/Dpkg_Shlibs/patterns.cpp \
+	t/Dpkg_Shlibs/patterns.map \
+	t/Dpkg_Shlibs/ld.so.conf \
+	t/Dpkg_Shlibs/ld.so.conf_2 \
+	t/Dpkg_Shlibs/ld.so.conf.d/normal.conf \
+	t/Dpkg_Shlibs/ld.so.conf.d/inf_recurse.conf \
+	t/Dpkg_Shlibs/ld.so.conf.d/recursive.conf \
+	t/Dpkg_Shlibs/objdump.space \
+	t/Dpkg_Shlibs/objdump.spacesyms \
+	t/Dpkg_Shlibs/objdump.basictags-amd64 \
+	t/Dpkg_Shlibs/objdump.basictags-i386 \
+	t/Dpkg_Shlibs/objdump.basictags-mips \
+	t/Dpkg_Shlibs/objdump.internal \
+	t/Dpkg_Shlibs/objdump.patterns \
+	t/Dpkg_Shlibs/objdump.glib-ia64 \
+	t/Dpkg_Shlibs/objdump.libc6-2.3 \
+	t/Dpkg_Shlibs/objdump.libc6-2.6 \
+	t/Dpkg_Shlibs/objdump.dbd-pg \
+	t/Dpkg_Shlibs/objdump.ls \
+	t/Dpkg_Shlibs/spacesyms.map \
+	t/Dpkg_Shlibs/spacesyms-c-gen.pl \
+	t/Dpkg_Shlibs/spacesyms-o-map.pl \
+	t/Dpkg_Source_Patch/c-style.patch \
+	t/Dpkg_Source_Patch/ghost-hunk.patch \
+	t/Dpkg_Source_Patch/indent-header.patch \
+	t/Dpkg_Source_Patch/index-+++.patch \
+	t/Dpkg_Source_Patch/index-alone.patch \
+	t/Dpkg_Source_Patch/index-inert.patch \
+	t/Dpkg_Source_Patch/partial.patch \
+	t/Dpkg_Changelog/countme \
+	t/Dpkg_Changelog/date-format \
+	t/Dpkg_Changelog/fields \
+	t/Dpkg_Changelog/misplaced-tz \
+	t/Dpkg_Changelog/regressions \
+	t/Dpkg_Changelog/shadow \
+	t/Dpkg_Changelog/stop-modeline \
+	t/Dpkg_Changelog/unreleased \
+	t/Dpkg_Checksums/empty \
+	t/Dpkg_Checksums/data-1 \
+	t/Dpkg_Checksums/data-2 \
+	t/Dpkg_Conf/config-mixed \
+	t/Dpkg_Control/control-1 \
+	t/Dpkg_Control/bogus-unsigned.dsc \
+	t/Dpkg_Control/bogus-armor-double.dsc \
+	t/Dpkg_Control/bogus-armor-formfeed.dsc \
+	t/Dpkg_Control/bogus-armor-no-sig.dsc \
+	t/Dpkg_Control/bogus-armor-trail.dsc \
+	t/Dpkg_Control/bogus-armor-inline.dsc \
+	t/Dpkg_Control/bogus-armor-nested.dsc \
+	t/Dpkg_Control/bogus-armor-spaces.dsc \
+	t/Dpkg_Control_Tests/tests-missing-fields \
+	t/Dpkg_Control_Tests/tests-plain-text \
+	t/Dpkg_Control_Tests/tests-valid \
+	t/Dpkg_Source_Quilt/parse/debian/patches/series \
+	t/Dpkg_Substvars/substvars1 \
+	t/Dpkg_Substvars/substvars2 \
+	t/Dpkg_Dist_Files/files-byhand \
+	t/Dpkg_Dist_Files/files-fragment-a \
+	t/Dpkg_Dist_Files/files-fragment-b \
+	t/dpkg_buildpackage/test-source_0.dsc \
+	t/dpkg_buildpackage/test-source_0_all.changes \
+	t/dpkg_buildpackage/test-source_0_any.changes \
+	t/dpkg_buildpackage/test-source_0_binary.changes \
+	t/dpkg_buildpackage/test-source_0_full.changes \
+	t/dpkg_buildpackage/test-source_0_source.changes \
+	t/dpkg_source/testsuite_0.dsc \
+	t/dpkg_source/testsuite_1.dsc \
+	t/dpkg_source/testsuite_2.dsc \
+	t/dpkg_source/testsuite_3.dsc \
+	t/merge_changelogs/ch-old \
+	t/merge_changelogs/ch-a \
+	t/merge_changelogs/ch-b \
+	t/merge_changelogs/ch-badver-a \
+	t/merge_changelogs/ch-badver-b \
+	t/merge_changelogs/ch-badver-merged \
+	t/merge_changelogs/ch-badver-old \
+	t/merge_changelogs/ch-merged \
+	t/merge_changelogs/ch-merged-basic \
+	t/merge_changelogs/ch-merged-pr \
+	t/merge_changelogs/ch-merged-pr-basic \
+	t/mk/debian/changelog \
+	t/mk/architecture.mk \
+	t/mk/buildflags.mk \
+	t/mk/buildopts.mk \
+	t/mk/buildtools.mk \
+	t/mk/pkg-info.mk \
+	t/mk/vendor-v0.mk \
+	t/mk/vendor-v1.mk \
+	t/mk/vendor.mk \
+	t/origins/debian \
+	t/origins/default \
+	t/origins/gnewsense \
+	t/origins/ubuntu
+
+test_data_objects = \
+	t/Dpkg_Shlibs/libobjdump.basictags-amd64.so \
+	t/Dpkg_Shlibs/libobjdump.basictags-i386.so \
+	t/Dpkg_Shlibs/libobjdump.basictags-mips.so \
+	t/Dpkg_Shlibs/libobjdump.patterns.so \
+	t/Dpkg_Shlibs/libobjdump.spacesyms.so \
+	$(nil)
+
+TEST_RUNNER = '\
+	my $$harness = TAP::Harness->new({ \
+	    exec => sub { my (undef, $$test) = @_; \
+	        return [ $$test ] if $$test !~ "\.t\$$" and -x $$test; \
+	        return }, \
+	    lib => [ "$(top_srcdir)/scripts", "$(top_srcdir)/dselect/methods"  ], \
+	    color => 1, \
+	    verbosity => $(TEST_VERBOSE), \
+	    jobs => $(TEST_PARALLEL), \
+	    failures => 1, \
+	}); \
+	my $$aggregate = $$harness->runtests(@ARGV); \
+	die "FAIL: test suite has errors\n" if $$aggregate->has_errors;'
+
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .pl .sh
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/check.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign scripts/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign scripts/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+$(top_srcdir)/check.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+Build.PL: $(top_builddir)/config.status $(srcdir)/Build.PL.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+README.cpan: $(top_builddir)/config.status $(srcdir)/README.cpan.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
+install-sbinSCRIPTS: $(sbin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-sbinSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-man3: $(man3_MANS)
+	@$(NORMAL_INSTALL)
+	@list1='$(man3_MANS)'; \
+	list2=''; \
+	test -n "$(man3dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.3[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man3:
+	@$(NORMAL_UNINSTALL)
+	@list='$(man3_MANS)'; test -n "$(man3dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
+install-nobase_dist_perllibDATA: $(nobase_dist_perllib_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(perllibdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(perllibdir)" || exit 1; \
+	fi; \
+	$(am__nobase_list) | while read dir files; do \
+	  xfiles=; for file in $$files; do \
+	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+	  test -z "$$xfiles" || { \
+	    test "x$$dir" = x. || { \
+	      echo " $(MKDIR_P) '$(DESTDIR)$(perllibdir)/$$dir'"; \
+	      $(MKDIR_P) "$(DESTDIR)$(perllibdir)/$$dir"; }; \
+	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(perllibdir)/$$dir'"; \
+	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(perllibdir)/$$dir" || exit $$?; }; \
+	done
+
+uninstall-nobase_dist_perllibDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
+	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+	dir='$(DESTDIR)$(perllibdir)'; $(am__uninstall_files_from_dir)
+install-nobase_dist_pkgdataDATA: $(nobase_dist_pkgdata_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
+	fi; \
+	$(am__nobase_list) | while read dir files; do \
+	  xfiles=; for file in $$files; do \
+	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+	  test -z "$$xfiles" || { \
+	    test "x$$dir" = x. || { \
+	      echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)/$$dir'"; \
+	      $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)/$$dir"; }; \
+	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(pkgdatadir)/$$dir'"; \
+	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(pkgdatadir)/$$dir" || exit $$?; }; \
+	done
+
+uninstall-nobase_dist_pkgdataDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-recursive
+all-am: Makefile $(SCRIPTS) $(MANS) $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(pkgdatadir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-data-local install-man \
+	install-nobase_dist_perllibDATA \
+	install-nobase_dist_pkgdataDATA
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binSCRIPTS install-sbinSCRIPTS
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man: install-man3
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binSCRIPTS uninstall-local uninstall-man \
+	uninstall-nobase_dist_perllibDATA \
+	uninstall-nobase_dist_pkgdataDATA uninstall-sbinSCRIPTS
+
+uninstall-man: uninstall-man3
+
+.MAKE: $(am__recursive_targets) check-am install-am install-data-am \
+	install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am check-local clean clean-generic clean-libtool \
+	clean-local cscopelist-am ctags ctags-am distclean \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binSCRIPTS install-data install-data-am \
+	install-data-hook install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man3 install-nobase_dist_perllibDATA \
+	install-nobase_dist_pkgdataDATA install-pdf install-pdf-am \
+	install-ps install-ps-am install-sbinSCRIPTS install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-binSCRIPTS \
+	uninstall-local uninstall-man uninstall-man3 \
+	uninstall-nobase_dist_perllibDATA \
+	uninstall-nobase_dist_pkgdataDATA uninstall-sbinSCRIPTS
+
+.PRECIOUS: Makefile
+
+
+.pl:
+	@test -d `dirname $@` || $(MKDIR_P) `dirname $@`
+	$(do_perl_subst) <$< >$@
+	$(AM_V_at) chmod +x $@
+
+.sh:
+	@test -d `dirname $@` || $(MKDIR_P) `dirname $@`
+	$(do_shell_subst) <$< >$@
+	$(AM_V_at) chmod +x $@
+
+install-data-local:
+# Install manual pages for perl modules manually as make can't deal
+# properly with filenames containing colons
+# Remove empty manual pages (perl modules not documented)
+	$(MKDIR_P) $(DESTDIR)$(man3dir)
+	for module in $(nobase_dist_perllib_DATA); do \
+	  name=`echo $$module | sed -e 's|/|::|g' -e 's/\.pm$$//'`; \
+	  $(POD2MAN) --utf8 --center=libdpkg-perl --release=$(VERSION) \
+	    --name="$$name" --section=$(man_perl_section) $(srcdir)/$$module \
+	    >$(DESTDIR)$(man3dir)/$$name.$(man_perl_section); \
+	  test -s $(DESTDIR)$(man3dir)/$$name.$(man_perl_section) || \
+	  rm -f $(DESTDIR)$(man3dir)/$$name.$(man_perl_section); \
+	done
+
+# Ideally we'd use 'sed -i', but unfortunately that's not portable.
+install-data-hook:
+	mv $(DESTDIR)$(perllibdir)/Dpkg.pm \
+	   $(DESTDIR)$(perllibdir)/Dpkg.pm.tmp
+	$(do_perl_subst) <$(DESTDIR)$(perllibdir)/Dpkg.pm.tmp \
+	                 >$(DESTDIR)$(perllibdir)/Dpkg.pm
+	rm -f $(DESTDIR)$(perllibdir)/Dpkg.pm.tmp
+
+uninstall-local:
+	for module in $(nobase_dist_perllib_DATA); do \
+	  rm -f $(DESTDIR)$(man3dir)/`echo $$module | sed -e 's|/|::|g' -e 's/\.pm$$/.$(man_perl_section)/'`; \
+	done
+
+coverage: check
+	$(PERL_COVER) -silent \
+	  -ignore_re '^t/.*\.t' \
+	  -outputdir $(top_builddir)/doc/coverage/scripts
+	: # Cleanup coverage report index
+	$(PERL) -i -p -e "s:$(abs_top_builddir)::" \
+	  $(top_builddir)/doc/coverage/scripts/coverage.html
+
+coverage-clean:
+	rm -rf cover_db
+
+$(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-amd64.so: $(srcdir)/t/Dpkg_Shlibs/basictags.c
+	$(CC) $(CFLAGS) -shared -fPIC -Wl,-soname -Wl,libbasictags.so.1 $< \
+	  -DAMD64 -o $@
+
+$(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-mips.so: $(srcdir)/t/Dpkg_Shlibs/basictags.c
+	$(CC) $(CFLAGS) -shared -fPIC -Wl,-soname -Wl,libbasictags.so.1 $< \
+	  -DMIPS -o $@
+
+$(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-i386.so: $(srcdir)/t/Dpkg_Shlibs/basictags.c
+	$(CC) $(CFLAGS) -shared -fPIC -Wl,-soname -Wl,libbasictags.so.1 $< \
+	  -DI386 -o $@
+
+$(srcdir)/t/Dpkg_Shlibs/libobjdump.patterns.so: $(srcdir)/t/Dpkg_Shlibs/patterns.cpp $(srcdir)/t/Dpkg_Shlibs/patterns.map
+	$(CXX) $(CXXFLAGS) -shared -fPIC -Wl,-soname -Wl,libpatterns.so.1 \
+	  -Wl,--version-script=$(srcdir)/t/Dpkg_Shlibs/patterns.map $< -o $@
+
+$(srcdir)/t/Dpkg_Shlibs/spacesyms.c: $(srcdir)/t/Dpkg_Shlibs/spacesyms-c-gen.pl
+	$(srcdir)/t/Dpkg_Shlibs/spacesyms-c-gen.pl > $@
+
+$(srcdir)/t/Dpkg_Shlibs/spacesyms.o: $(srcdir)/t/Dpkg_Shlibs/spacesyms.c $(srcdir)/t/Dpkg_Shlibs/spacesyms-o-map.pl
+	$(CC) $(CFLAGS) -c -fPIC -o $@.tmp $<
+	$(srcdir)/t/Dpkg_Shlibs/spacesyms-o-map.pl $@.tmp $@
+	rm -f $@.tmp
+
+$(srcdir)/t/Dpkg_Shlibs/libobjdump.spacesyms.so: $(srcdir)/t/Dpkg_Shlibs/spacesyms.o $(srcdir)/t/Dpkg_Shlibs/spacesyms.map
+	$(CC) -shared -Wl,-soname -Wl,libspacesyms.so.1 \
+	  -Wl,--version-script=$(srcdir)/t/Dpkg_Shlibs/spacesyms.map $< -o $@
+
+.PHONY: refresh-test-data
+
+refresh-test-data: $(test_data_objects)
+	$(OBJDUMP) $(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-amd64.so \
+	  >$(srcdir)/t/Dpkg_Shlibs/objdump.basictags-amd64
+	$(OBJDUMP) $(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-i386.so \
+	  >$(srcdir)/t/Dpkg_Shlibs/objdump.basictags-i386
+	$(OBJDUMP) $(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-mips.so \
+	  >$(srcdir)/t/Dpkg_Shlibs/objdump.basictags-mips
+	$(OBJDUMP) $(srcdir)/t/Dpkg_Shlibs/libobjdump.patterns.so \
+	  >$(srcdir)/t/Dpkg_Shlibs/objdump.patterns
+	$(OBJDUMP) $(srcdir)/t/Dpkg_Shlibs/libobjdump.spacesyms.so \
+	  >$(srcdir)/t/Dpkg_Shlibs/objdump.spacesyms
+	$(OBJDUMP) `which ls` >$(srcdir)/t/Dpkg_Shlibs/objdump.ls
+
+TEST_VERBOSE ?= 0
+TEST_PARALLEL ?= 1
+
+check-clean:
+	[ -z "$(test_tmpdir)" ] || rm -fr $(test_tmpdir)
+
+check-local: $(test_data) $(test_programs) $(test_scripts)
+	[ -z "$(test_tmpdir)" ] || $(MKDIR_P) $(test_tmpdir)
+	PATH="$(abs_top_builddir)/src:$(abs_top_builddir)/scripts:$(abs_top_builddir)/utils:$(PATH)" \
+	  LC_ALL=C \
+	  DPKG_COLORS=never \
+	  $(TEST_ENV_VARS) \
+	  srcdir=$(srcdir) builddir=$(builddir) \
+	  CC=$(CC) \
+	  PERL=$(PERL) \
+	  SHELL=$(SHELL) \
+	  PERL_DL_NONLAZY=1 \
+	  PERL5LIB=$(abs_top_srcdir)/scripts:$(abs_top_srcdir)/dselect/methods \
+	  PERL5OPT=$(TEST_COVERAGE) \
+	  $(PERL) -MTAP::Harness -e $(TEST_RUNNER) \
+	    $(addprefix $(builddir)/,$(test_programs)) \
+	    $(addprefix $(srcdir)/,$(test_scripts))
+
+clean-local: check-clean coverage-clean
+	rm -fr man
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/scripts/Makefile.in dpkg-1.20.7.1/scripts/Makefile.in
--- dpkg-1.20.7.1-orig/scripts/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/Makefile.in	2021-06-09 18:23:00.933296459 -0500
@@ -0,0 +1,1377 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Variables to be defined:
+#
+#  TEST_VERBOSE - set to 0 (default) or 1 to control test suite verbosity
+#  TEST_PARALLEL - set to 1 (default) or N to control the parallel jobs
+#  TEST_ENV_VARS - environment variables to be set for the test suite
+#  TEST_COVERAGE - set to the perl module in charge of getting test coverage
+#  test_tmpdir - test suite temporary directory
+#  test_scripts - list of test case scripts
+#  test_programs - list of test case programs
+#  test_data - list of test data files
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = scripts
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(nobase_dist_perllib_DATA) \
+	$(nobase_dist_pkgdata_DATA) $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = Build.PL README.cpan
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" \
+	"$(DESTDIR)$(man3dir)" "$(DESTDIR)$(perllibdir)" \
+	"$(DESTDIR)$(pkgdatadir)"
+SCRIPTS = $(bin_SCRIPTS) $(sbin_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+man3dir = $(mandir)/man3
+NROFF = nroff
+MANS = $(man3_MANS)
+DATA = $(nobase_dist_perllib_DATA) $(nobase_dist_pkgdata_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir distdir-am
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Build.PL.in $(srcdir)/Makefile.in \
+	$(srcdir)/README.cpan.in $(top_srcdir)/check.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = objdump -w -f -p -T -R
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = mk po
+sbin_SCRIPTS = \
+	dpkg-fsys-usrunmess
+
+bin_SCRIPTS = \
+	dpkg-architecture \
+	dpkg-buildflags \
+	dpkg-buildpackage \
+	dpkg-checkbuilddeps \
+	dpkg-distaddfile \
+	dpkg-genbuildinfo \
+	dpkg-genchanges \
+	dpkg-gencontrol \
+	dpkg-gensymbols \
+	dpkg-maintscript-helper \
+	dpkg-mergechangelogs \
+	dpkg-name \
+	dpkg-parsechangelog \
+	dpkg-realpath \
+	dpkg-scanpackages \
+	dpkg-scansources \
+	dpkg-shlibdeps \
+	dpkg-source \
+	dpkg-vendor
+
+EXTRA_DIST = dpkg-architecture.pl dpkg-buildflags.pl \
+	dpkg-buildpackage.pl dpkg-checkbuilddeps.pl \
+	dpkg-distaddfile.pl dpkg-fsys-usrunmess.pl \
+	dpkg-genbuildinfo.pl dpkg-genchanges.pl dpkg-gencontrol.pl \
+	dpkg-gensymbols.pl dpkg-maintscript-helper.sh \
+	dpkg-mergechangelogs.pl dpkg-name.pl dpkg-parsechangelog.pl \
+	dpkg-realpath.sh dpkg-scanpackages.pl dpkg-scansources.pl \
+	dpkg-shlibdeps.pl dpkg-source.pl dpkg-vendor.pl \
+	$(test_scripts) $(test_data) Test/Dpkg.pm $(nil)
+nobase_dist_pkgdata_DATA = \
+	sh/dpkg-error.sh \
+	# EOL
+
+CLEANFILES = \
+	$(test_data_objects) \
+	$(sbin_SCRIPTS) \
+	$(bin_SCRIPTS)
+
+perllibdir = $(PERL_LIBDIR)
+nobase_dist_perllib_DATA = \
+	Dpkg/Arch.pm \
+	Dpkg/BuildFlags.pm \
+	Dpkg/BuildOptions.pm \
+	Dpkg/BuildProfiles.pm \
+	Dpkg/Build/Env.pm \
+	Dpkg/Build/Info.pm \
+	Dpkg/Build/Types.pm \
+	Dpkg/Changelog.pm \
+	Dpkg/Changelog/Debian.pm \
+	Dpkg/Changelog/Entry.pm \
+	Dpkg/Changelog/Entry/Debian.pm \
+	Dpkg/Changelog/Parse.pm \
+	Dpkg/Checksums.pm \
+	Dpkg/Compression.pm \
+	Dpkg/Compression/FileHandle.pm \
+	Dpkg/Compression/Process.pm \
+	Dpkg/Conf.pm \
+	Dpkg/Control.pm \
+	Dpkg/Control/Changelog.pm \
+	Dpkg/Control/FieldsCore.pm \
+	Dpkg/Control/Fields.pm \
+	Dpkg/Control/Info.pm \
+	Dpkg/Control/HashCore.pm \
+	Dpkg/Control/Hash.pm \
+	Dpkg/Control/Tests.pm \
+	Dpkg/Control/Tests/Entry.pm \
+	Dpkg/Control/Types.pm \
+	Dpkg/Deps.pm \
+	Dpkg/Deps/AND.pm \
+	Dpkg/Deps/KnownFacts.pm \
+	Dpkg/Deps/Multiple.pm \
+	Dpkg/Deps/OR.pm \
+	Dpkg/Deps/Simple.pm \
+	Dpkg/Deps/Union.pm \
+	Dpkg/Dist/Files.pm \
+	Dpkg/ErrorHandling.pm \
+	Dpkg/Exit.pm \
+	Dpkg/File.pm \
+	Dpkg/Getopt.pm \
+	Dpkg/Gettext.pm \
+	Dpkg/Index.pm \
+	Dpkg/Interface/Storable.pm \
+	Dpkg/IPC.pm \
+	Dpkg/Lock.pm \
+	Dpkg/OpenPGP.pm \
+	Dpkg/Package.pm \
+	Dpkg/Path.pm \
+	Dpkg/Shlibs.pm \
+	Dpkg/Shlibs/Objdump.pm \
+	Dpkg/Shlibs/Symbol.pm \
+	Dpkg/Shlibs/SymbolFile.pm \
+	Dpkg/Shlibs/Cppfilt.pm \
+	Dpkg/Source/Archive.pm \
+	Dpkg/Source/BinaryFiles.pm \
+	Dpkg/Source/Format.pm \
+	Dpkg/Source/Functions.pm \
+	Dpkg/Source/Package.pm \
+	Dpkg/Source/Package/V1.pm \
+	Dpkg/Source/Package/V2.pm \
+	Dpkg/Source/Package/V3/Bzr.pm \
+	Dpkg/Source/Package/V3/Custom.pm \
+	Dpkg/Source/Package/V3/Native.pm \
+	Dpkg/Source/Package/V3/Git.pm \
+	Dpkg/Source/Package/V3/Quilt.pm \
+	Dpkg/Source/Patch.pm \
+	Dpkg/Source/Quilt.pm \
+	Dpkg/Substvars.pm \
+	Dpkg/Vars.pm \
+	Dpkg/Vendor.pm \
+	Dpkg/Vendor/Debian.pm \
+	Dpkg/Vendor/Default.pm \
+	Dpkg/Vendor/Ubuntu.pm \
+	Dpkg/Version.pm \
+	Dpkg.pm
+
+
+# Keep it even if empty to have man3dir correctly set
+man3_MANS = 
+man_perl_section = 3perl
+do_perl_subst = $(AM_V_GEN) sed \
+	-e "s:^\#![[:space:]]*/usr/bin/perl:\#!$(PERL):" \
+	-e "s:our \$$CONFDIR = .*;:our \$$CONFDIR = '$(pkgconfdir)';:" \
+	-e "s:our \$$ADMINDIR = .*;:our \$$ADMINDIR = '$(admindir)';:" \
+	-e "s:our \$$LIBDIR = .*;:our \$$LIBDIR = '$(pkglibexecdir)';:" \
+	-e "s:our \$$DATADIR = .*;:our \$$DATADIR = '$(pkgdatadir)';:" \
+	-e "s:our \$$PROGMAKE = .*;:our \$$PROGMAKE = '$(MAKE)';:" \
+	-e "s:our \$$PROGTAR = .*;:our \$$PROGTAR = '$(TAR)';:" \
+	-e "s:our \$$PROGPATCH = .*;:our \$$PROGPATCH = '$(PATCH)';:" \
+	-e "s:our \$$PROGVERSION = .*;:our \$$PROGVERSION = '$(PACKAGE_VERSION)';:"
+
+do_shell_subst = $(AM_V_GEN) sed \
+	-e "s:^PKGDATADIR_DEFAULT=.*$$:PKGDATADIR_DEFAULT='$(pkgdatadir)':" \
+	-e "s:^version=['\"][^'\"]*[\"']:version=\"$(PACKAGE_VERSION)\":"
+
+SUFFIXES = .pl .sh
+TEST_ENV_VARS = \
+	DPKG_PROGTAR=$(TAR) \
+	DPKG_PROGPATCH=$(PATCH) \
+	DPKG_PROGMAKE=$(MAKE) \
+	DPKG_DATADIR=$(top_srcdir)/data \
+	DPKG_ORIGINS_DIR=$(srcdir)/t/origins
+
+TEST_COVERAGE = $(PERL_COVERAGE)
+test_tmpdir = t.tmp
+test_scripts = \
+	t/Dpkg_Version.t \
+	t/Dpkg_Arch.t \
+	t/Dpkg_Package.t \
+	t/Dpkg_Shlibs_Cppfilt.t \
+	t/Dpkg_Shlibs.t \
+	t/Dpkg_BuildFlags.t \
+	t/Dpkg_BuildFlags_Ubuntu.t \
+	t/Dpkg_BuildOptions.t \
+	t/Dpkg_BuildProfiles.t \
+	t/Dpkg_Build_Env.t \
+	t/Dpkg_Build_Info.t \
+	t/Dpkg_Build_Types.t \
+	t/Dpkg_Checksums.t \
+	t/Dpkg_ErrorHandling.t \
+	t/Dpkg_Exit.t \
+	t/Dpkg_File.t \
+	t/Dpkg_Lock.t \
+	t/Dpkg_Getopt.t \
+	t/Dpkg_Gettext.t \
+	t/Dpkg_Conf.t \
+	t/Dpkg_Deps.t \
+	t/Dpkg_Path.t \
+	t/Dpkg_Vars.t \
+	t/Dpkg_Interface_Storable.t \
+	t/Dpkg_OpenPGP.t \
+	t/Dpkg_Vendor.t \
+	t/Dpkg_Changelog.t \
+	t/Dpkg_Changelog_Ubuntu.t \
+	t/Dpkg_Control_Fields.t \
+	t/Dpkg_Control.t \
+	t/Dpkg_Control_Tests.t \
+	t/Dpkg_Index.t \
+	t/Dpkg_Substvars.t \
+	t/Dpkg_IPC.t \
+	t/Dpkg_Compression.t \
+	t/Dpkg_Source_Functions.t \
+	t/Dpkg_Source_Patch.t \
+	t/Dpkg_Source_Quilt.t \
+	t/Dpkg_Source_Format.t \
+	t/Dpkg_Source_Archive.t \
+	t/Dpkg_Source_Package.t \
+	t/Dpkg_Dist_Files.t \
+	t/dpkg_realpath.t \
+	t/dpkg_source.t \
+	t/dpkg_buildpackage.t \
+	t/merge_changelogs.t \
+	t/mk.t \
+	$(nil)
+
+test_data = \
+	t/Dpkg_OpenPGP/package_1.0.orig.tar \
+	t/Dpkg_OpenPGP/package_1.0.orig.tar.asc \
+	t/Dpkg_OpenPGP/package_1.0.orig.tar.sig \
+	t/Dpkg_Shlibs/symbols.internal \
+	t/Dpkg_Shlibs/symbols.internal-allow \
+	t/Dpkg_Shlibs/symbols.internal-allow-groups \
+	t/Dpkg_Shlibs/symbols.internal-filter \
+	t/Dpkg_Shlibs/symbols.fake-1 \
+	t/Dpkg_Shlibs/symbols.fake-2 \
+	t/Dpkg_Shlibs/symbols.fake-3 \
+	t/Dpkg_Shlibs/symbols.include-1 \
+	t/Dpkg_Shlibs/symbols.include-2 \
+	t/Dpkg_Shlibs/symbols.include-3 \
+	t/Dpkg_Shlibs/basictags.symbols \
+	t/Dpkg_Shlibs/basictags.c \
+	t/Dpkg_Shlibs/patterns.symbols \
+	t/Dpkg_Shlibs/patterns.cpp \
+	t/Dpkg_Shlibs/patterns.map \
+	t/Dpkg_Shlibs/ld.so.conf \
+	t/Dpkg_Shlibs/ld.so.conf_2 \
+	t/Dpkg_Shlibs/ld.so.conf.d/normal.conf \
+	t/Dpkg_Shlibs/ld.so.conf.d/inf_recurse.conf \
+	t/Dpkg_Shlibs/ld.so.conf.d/recursive.conf \
+	t/Dpkg_Shlibs/objdump.space \
+	t/Dpkg_Shlibs/objdump.spacesyms \
+	t/Dpkg_Shlibs/objdump.basictags-amd64 \
+	t/Dpkg_Shlibs/objdump.basictags-i386 \
+	t/Dpkg_Shlibs/objdump.basictags-mips \
+	t/Dpkg_Shlibs/objdump.internal \
+	t/Dpkg_Shlibs/objdump.patterns \
+	t/Dpkg_Shlibs/objdump.glib-ia64 \
+	t/Dpkg_Shlibs/objdump.libc6-2.3 \
+	t/Dpkg_Shlibs/objdump.libc6-2.6 \
+	t/Dpkg_Shlibs/objdump.dbd-pg \
+	t/Dpkg_Shlibs/objdump.ls \
+	t/Dpkg_Shlibs/spacesyms.map \
+	t/Dpkg_Shlibs/spacesyms-c-gen.pl \
+	t/Dpkg_Shlibs/spacesyms-o-map.pl \
+	t/Dpkg_Source_Patch/c-style.patch \
+	t/Dpkg_Source_Patch/ghost-hunk.patch \
+	t/Dpkg_Source_Patch/indent-header.patch \
+	t/Dpkg_Source_Patch/index-+++.patch \
+	t/Dpkg_Source_Patch/index-alone.patch \
+	t/Dpkg_Source_Patch/index-inert.patch \
+	t/Dpkg_Source_Patch/partial.patch \
+	t/Dpkg_Changelog/countme \
+	t/Dpkg_Changelog/date-format \
+	t/Dpkg_Changelog/fields \
+	t/Dpkg_Changelog/misplaced-tz \
+	t/Dpkg_Changelog/regressions \
+	t/Dpkg_Changelog/shadow \
+	t/Dpkg_Changelog/stop-modeline \
+	t/Dpkg_Changelog/unreleased \
+	t/Dpkg_Checksums/empty \
+	t/Dpkg_Checksums/data-1 \
+	t/Dpkg_Checksums/data-2 \
+	t/Dpkg_Conf/config-mixed \
+	t/Dpkg_Control/control-1 \
+	t/Dpkg_Control/bogus-unsigned.dsc \
+	t/Dpkg_Control/bogus-armor-double.dsc \
+	t/Dpkg_Control/bogus-armor-formfeed.dsc \
+	t/Dpkg_Control/bogus-armor-no-sig.dsc \
+	t/Dpkg_Control/bogus-armor-trail.dsc \
+	t/Dpkg_Control/bogus-armor-inline.dsc \
+	t/Dpkg_Control/bogus-armor-nested.dsc \
+	t/Dpkg_Control/bogus-armor-spaces.dsc \
+	t/Dpkg_Control_Tests/tests-missing-fields \
+	t/Dpkg_Control_Tests/tests-plain-text \
+	t/Dpkg_Control_Tests/tests-valid \
+	t/Dpkg_Source_Quilt/parse/debian/patches/series \
+	t/Dpkg_Substvars/substvars1 \
+	t/Dpkg_Substvars/substvars2 \
+	t/Dpkg_Dist_Files/files-byhand \
+	t/Dpkg_Dist_Files/files-fragment-a \
+	t/Dpkg_Dist_Files/files-fragment-b \
+	t/dpkg_buildpackage/test-source_0.dsc \
+	t/dpkg_buildpackage/test-source_0_all.changes \
+	t/dpkg_buildpackage/test-source_0_any.changes \
+	t/dpkg_buildpackage/test-source_0_binary.changes \
+	t/dpkg_buildpackage/test-source_0_full.changes \
+	t/dpkg_buildpackage/test-source_0_source.changes \
+	t/dpkg_source/testsuite_0.dsc \
+	t/dpkg_source/testsuite_1.dsc \
+	t/dpkg_source/testsuite_2.dsc \
+	t/dpkg_source/testsuite_3.dsc \
+	t/merge_changelogs/ch-old \
+	t/merge_changelogs/ch-a \
+	t/merge_changelogs/ch-b \
+	t/merge_changelogs/ch-badver-a \
+	t/merge_changelogs/ch-badver-b \
+	t/merge_changelogs/ch-badver-merged \
+	t/merge_changelogs/ch-badver-old \
+	t/merge_changelogs/ch-merged \
+	t/merge_changelogs/ch-merged-basic \
+	t/merge_changelogs/ch-merged-pr \
+	t/merge_changelogs/ch-merged-pr-basic \
+	t/mk/debian/changelog \
+	t/mk/architecture.mk \
+	t/mk/buildflags.mk \
+	t/mk/buildopts.mk \
+	t/mk/buildtools.mk \
+	t/mk/pkg-info.mk \
+	t/mk/vendor-v0.mk \
+	t/mk/vendor-v1.mk \
+	t/mk/vendor.mk \
+	t/origins/debian \
+	t/origins/default \
+	t/origins/gnewsense \
+	t/origins/ubuntu
+
+test_data_objects = \
+	t/Dpkg_Shlibs/libobjdump.basictags-amd64.so \
+	t/Dpkg_Shlibs/libobjdump.basictags-i386.so \
+	t/Dpkg_Shlibs/libobjdump.basictags-mips.so \
+	t/Dpkg_Shlibs/libobjdump.patterns.so \
+	t/Dpkg_Shlibs/libobjdump.spacesyms.so \
+	$(nil)
+
+TEST_RUNNER = '\
+	my $$harness = TAP::Harness->new({ \
+	    exec => sub { my (undef, $$test) = @_; \
+	        return [ $$test ] if $$test !~ "\.t\$$" and -x $$test; \
+	        return }, \
+	    lib => [ "$(top_srcdir)/scripts", "$(top_srcdir)/dselect/methods"  ], \
+	    color => 1, \
+	    verbosity => $(TEST_VERBOSE), \
+	    jobs => $(TEST_PARALLEL), \
+	    failures => 1, \
+	}); \
+	my $$aggregate = $$harness->runtests(@ARGV); \
+	die "FAIL: test suite has errors\n" if $$aggregate->has_errors;'
+
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .pl .sh
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/check.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign scripts/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign scripts/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+$(top_srcdir)/check.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+Build.PL: $(top_builddir)/config.status $(srcdir)/Build.PL.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+README.cpan: $(top_builddir)/config.status $(srcdir)/README.cpan.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
+install-sbinSCRIPTS: $(sbin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	@list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-sbinSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(sbin_SCRIPTS)'; test -n "$(sbindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	dir='$(DESTDIR)$(sbindir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-man3: $(man3_MANS)
+	@$(NORMAL_INSTALL)
+	@list1='$(man3_MANS)'; \
+	list2=''; \
+	test -n "$(man3dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.3[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man3:
+	@$(NORMAL_UNINSTALL)
+	@list='$(man3_MANS)'; test -n "$(man3dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
+install-nobase_dist_perllibDATA: $(nobase_dist_perllib_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(perllibdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(perllibdir)" || exit 1; \
+	fi; \
+	$(am__nobase_list) | while read dir files; do \
+	  xfiles=; for file in $$files; do \
+	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+	  test -z "$$xfiles" || { \
+	    test "x$$dir" = x. || { \
+	      echo " $(MKDIR_P) '$(DESTDIR)$(perllibdir)/$$dir'"; \
+	      $(MKDIR_P) "$(DESTDIR)$(perllibdir)/$$dir"; }; \
+	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(perllibdir)/$$dir'"; \
+	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(perllibdir)/$$dir" || exit $$?; }; \
+	done
+
+uninstall-nobase_dist_perllibDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_dist_perllib_DATA)'; test -n "$(perllibdir)" || list=; \
+	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+	dir='$(DESTDIR)$(perllibdir)'; $(am__uninstall_files_from_dir)
+install-nobase_dist_pkgdataDATA: $(nobase_dist_pkgdata_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(nobase_dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
+	fi; \
+	$(am__nobase_list) | while read dir files; do \
+	  xfiles=; for file in $$files; do \
+	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+	  test -z "$$xfiles" || { \
+	    test "x$$dir" = x. || { \
+	      echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)/$$dir'"; \
+	      $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)/$$dir"; }; \
+	    echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(pkgdatadir)/$$dir'"; \
+	    $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(pkgdatadir)/$$dir" || exit $$?; }; \
+	done
+
+uninstall-nobase_dist_pkgdataDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nobase_dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-recursive
+all-am: Makefile $(SCRIPTS) $(MANS) $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(perllibdir)" "$(DESTDIR)$(pkgdatadir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-data-local install-man \
+	install-nobase_dist_perllibDATA \
+	install-nobase_dist_pkgdataDATA
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binSCRIPTS install-sbinSCRIPTS
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man: install-man3
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binSCRIPTS uninstall-local uninstall-man \
+	uninstall-nobase_dist_perllibDATA \
+	uninstall-nobase_dist_pkgdataDATA uninstall-sbinSCRIPTS
+
+uninstall-man: uninstall-man3
+
+.MAKE: $(am__recursive_targets) check-am install-am install-data-am \
+	install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am check-local clean clean-generic clean-libtool \
+	clean-local cscopelist-am ctags ctags-am distclean \
+	distclean-generic distclean-libtool distclean-tags distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binSCRIPTS install-data install-data-am \
+	install-data-hook install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man3 install-nobase_dist_perllibDATA \
+	install-nobase_dist_pkgdataDATA install-pdf install-pdf-am \
+	install-ps install-ps-am install-sbinSCRIPTS install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-binSCRIPTS \
+	uninstall-local uninstall-man uninstall-man3 \
+	uninstall-nobase_dist_perllibDATA \
+	uninstall-nobase_dist_pkgdataDATA uninstall-sbinSCRIPTS
+
+.PRECIOUS: Makefile
+
+
+.pl:
+	@test -d `dirname $@` || $(MKDIR_P) `dirname $@`
+	$(do_perl_subst) <$< >$@
+	$(AM_V_at) chmod +x $@
+
+.sh:
+	@test -d `dirname $@` || $(MKDIR_P) `dirname $@`
+	$(do_shell_subst) <$< >$@
+	$(AM_V_at) chmod +x $@
+
+install-data-local:
+# Install manual pages for perl modules manually as make can't deal
+# properly with filenames containing colons
+# Remove empty manual pages (perl modules not documented)
+@BUILD_POD_DOC_TRUE@	$(MKDIR_P) $(DESTDIR)$(man3dir)
+@BUILD_POD_DOC_TRUE@	for module in $(nobase_dist_perllib_DATA); do \
+@BUILD_POD_DOC_TRUE@	  name=`echo $$module | sed -e 's|/|::|g' -e 's/\.pm$$//'`; \
+@BUILD_POD_DOC_TRUE@	  $(POD2MAN) --utf8 --center=libdpkg-perl --release=$(VERSION) \
+@BUILD_POD_DOC_TRUE@	    --name="$$name" --section=$(man_perl_section) $(srcdir)/$$module \
+@BUILD_POD_DOC_TRUE@	    >$(DESTDIR)$(man3dir)/$$name.$(man_perl_section); \
+@BUILD_POD_DOC_TRUE@	  test -s $(DESTDIR)$(man3dir)/$$name.$(man_perl_section) || \
+@BUILD_POD_DOC_TRUE@	  rm -f $(DESTDIR)$(man3dir)/$$name.$(man_perl_section); \
+@BUILD_POD_DOC_TRUE@	done
+
+# Ideally we'd use 'sed -i', but unfortunately that's not portable.
+install-data-hook:
+	mv $(DESTDIR)$(perllibdir)/Dpkg.pm \
+	   $(DESTDIR)$(perllibdir)/Dpkg.pm.tmp
+	$(do_perl_subst) <$(DESTDIR)$(perllibdir)/Dpkg.pm.tmp \
+	                 >$(DESTDIR)$(perllibdir)/Dpkg.pm
+	rm -f $(DESTDIR)$(perllibdir)/Dpkg.pm.tmp
+
+uninstall-local:
+@BUILD_POD_DOC_TRUE@	for module in $(nobase_dist_perllib_DATA); do \
+@BUILD_POD_DOC_TRUE@	  rm -f $(DESTDIR)$(man3dir)/`echo $$module | sed -e 's|/|::|g' -e 's/\.pm$$/.$(man_perl_section)/'`; \
+@BUILD_POD_DOC_TRUE@	done
+
+coverage: check
+	$(PERL_COVER) -silent \
+	  -ignore_re '^t/.*\.t' \
+	  -outputdir $(top_builddir)/doc/coverage/scripts
+	: # Cleanup coverage report index
+	$(PERL) -i -p -e "s:$(abs_top_builddir)::" \
+	  $(top_builddir)/doc/coverage/scripts/coverage.html
+
+coverage-clean:
+	rm -rf cover_db
+
+$(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-amd64.so: $(srcdir)/t/Dpkg_Shlibs/basictags.c
+	$(CC) $(CFLAGS) -shared -fPIC -Wl,-soname -Wl,libbasictags.so.1 $< \
+	  -DAMD64 -o $@
+
+$(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-mips.so: $(srcdir)/t/Dpkg_Shlibs/basictags.c
+	$(CC) $(CFLAGS) -shared -fPIC -Wl,-soname -Wl,libbasictags.so.1 $< \
+	  -DMIPS -o $@
+
+$(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-i386.so: $(srcdir)/t/Dpkg_Shlibs/basictags.c
+	$(CC) $(CFLAGS) -shared -fPIC -Wl,-soname -Wl,libbasictags.so.1 $< \
+	  -DI386 -o $@
+
+$(srcdir)/t/Dpkg_Shlibs/libobjdump.patterns.so: $(srcdir)/t/Dpkg_Shlibs/patterns.cpp $(srcdir)/t/Dpkg_Shlibs/patterns.map
+	$(CXX) $(CXXFLAGS) -shared -fPIC -Wl,-soname -Wl,libpatterns.so.1 \
+	  -Wl,--version-script=$(srcdir)/t/Dpkg_Shlibs/patterns.map $< -o $@
+
+$(srcdir)/t/Dpkg_Shlibs/spacesyms.c: $(srcdir)/t/Dpkg_Shlibs/spacesyms-c-gen.pl
+	$(srcdir)/t/Dpkg_Shlibs/spacesyms-c-gen.pl > $@
+
+$(srcdir)/t/Dpkg_Shlibs/spacesyms.o: $(srcdir)/t/Dpkg_Shlibs/spacesyms.c $(srcdir)/t/Dpkg_Shlibs/spacesyms-o-map.pl
+	$(CC) $(CFLAGS) -c -fPIC -o $@.tmp $<
+	$(srcdir)/t/Dpkg_Shlibs/spacesyms-o-map.pl $@.tmp $@
+	rm -f $@.tmp
+
+$(srcdir)/t/Dpkg_Shlibs/libobjdump.spacesyms.so: $(srcdir)/t/Dpkg_Shlibs/spacesyms.o $(srcdir)/t/Dpkg_Shlibs/spacesyms.map
+	$(CC) -shared -Wl,-soname -Wl,libspacesyms.so.1 \
+	  -Wl,--version-script=$(srcdir)/t/Dpkg_Shlibs/spacesyms.map $< -o $@
+
+.PHONY: refresh-test-data
+
+refresh-test-data: $(test_data_objects)
+	$(OBJDUMP) $(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-amd64.so \
+	  >$(srcdir)/t/Dpkg_Shlibs/objdump.basictags-amd64
+	$(OBJDUMP) $(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-i386.so \
+	  >$(srcdir)/t/Dpkg_Shlibs/objdump.basictags-i386
+	$(OBJDUMP) $(srcdir)/t/Dpkg_Shlibs/libobjdump.basictags-mips.so \
+	  >$(srcdir)/t/Dpkg_Shlibs/objdump.basictags-mips
+	$(OBJDUMP) $(srcdir)/t/Dpkg_Shlibs/libobjdump.patterns.so \
+	  >$(srcdir)/t/Dpkg_Shlibs/objdump.patterns
+	$(OBJDUMP) $(srcdir)/t/Dpkg_Shlibs/libobjdump.spacesyms.so \
+	  >$(srcdir)/t/Dpkg_Shlibs/objdump.spacesyms
+	$(OBJDUMP) `which ls` >$(srcdir)/t/Dpkg_Shlibs/objdump.ls
+
+TEST_VERBOSE ?= 0
+TEST_PARALLEL ?= 1
+
+check-clean:
+	[ -z "$(test_tmpdir)" ] || rm -fr $(test_tmpdir)
+
+check-local: $(test_data) $(test_programs) $(test_scripts)
+	[ -z "$(test_tmpdir)" ] || $(MKDIR_P) $(test_tmpdir)
+	PATH="$(abs_top_builddir)/src:$(abs_top_builddir)/scripts:$(abs_top_builddir)/utils:$(PATH)" \
+	  LC_ALL=C \
+	  DPKG_COLORS=never \
+	  $(TEST_ENV_VARS) \
+	  srcdir=$(srcdir) builddir=$(builddir) \
+	  CC=$(CC) \
+	  PERL=$(PERL) \
+	  SHELL=$(SHELL) \
+	  PERL_DL_NONLAZY=1 \
+	  PERL5LIB=$(abs_top_srcdir)/scripts:$(abs_top_srcdir)/dselect/methods \
+	  PERL5OPT=$(TEST_COVERAGE) \
+	  $(PERL) -MTAP::Harness -e $(TEST_RUNNER) \
+	    $(addprefix $(builddir)/,$(test_programs)) \
+	    $(addprefix $(srcdir)/,$(test_scripts))
+
+clean-local: check-clean coverage-clean
+	rm -fr man
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/scripts/mk/Makefile dpkg-1.20.7.1/scripts/mk/Makefile
--- dpkg-1.20.7.1-orig/scripts/mk/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/mk/Makefile	2021-06-09 18:24:51.989468374 -0500
@@ -0,0 +1,595 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# scripts/mk/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+subdir = scripts/mk
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(dist_pkgdata_DATA) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(pkgdatadir)"
+DATA = $(dist_pkgdata_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/scripts/mk
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/scripts/mk
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../../
+top_builddir = ../..
+top_srcdir = ../..
+dist_pkgdata_DATA = \
+	architecture.mk \
+	buildflags.mk \
+	buildopts.mk \
+	buildtools.mk \
+	default.mk \
+	pkg-info.mk \
+	vendor.mk
+
+do_path_subst = $(AM_V_GEN) sed \
+	-e "s:dpkg_datadir[[:space:]]*=[[:space:]]*[^[:space:]]*:dpkg_datadir = $(pkgdatadir):"
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign scripts/mk/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign scripts/mk/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
+	done
+
+uninstall-dist_pkgdataDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(pkgdatadir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-dist_pkgdataDATA
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-dist_pkgdataDATA
+
+.MAKE: install-am install-data-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am \
+	install-data-hook install-dist_pkgdataDATA install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am uninstall-dist_pkgdataDATA
+
+.PRECIOUS: Makefile
+
+
+install-data-hook:
+	mv $(DESTDIR)$(pkgdatadir)/default.mk \
+	   $(DESTDIR)$(pkgdatadir)/default.mk.tmp
+	$(do_path_subst) <$(DESTDIR)$(pkgdatadir)/default.mk.tmp \
+	                 >$(DESTDIR)$(pkgdatadir)/default.mk
+	rm -f $(DESTDIR)$(pkgdatadir)/default.mk.tmp
+
+	mv $(DESTDIR)$(pkgdatadir)/buildtools.mk \
+	   $(DESTDIR)$(pkgdatadir)/buildtools.mk.tmp
+	$(do_path_subst) <$(DESTDIR)$(pkgdatadir)/buildtools.mk.tmp \
+	                 >$(DESTDIR)$(pkgdatadir)/buildtools.mk
+	rm -f $(DESTDIR)$(pkgdatadir)/buildtools.mk.tmp
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/scripts/mk/Makefile.in dpkg-1.20.7.1/scripts/mk/Makefile.in
--- dpkg-1.20.7.1-orig/scripts/mk/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/mk/Makefile.in	2021-06-09 18:23:00.953296491 -0500
@@ -0,0 +1,595 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = scripts/mk
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(dist_pkgdata_DATA) \
+	$(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(pkgdatadir)"
+DATA = $(dist_pkgdata_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+dist_pkgdata_DATA = \
+	architecture.mk \
+	buildflags.mk \
+	buildopts.mk \
+	buildtools.mk \
+	default.mk \
+	pkg-info.mk \
+	vendor.mk
+
+do_path_subst = $(AM_V_GEN) sed \
+	-e "s:dpkg_datadir[[:space:]]*=[[:space:]]*[^[:space:]]*:dpkg_datadir = $(pkgdatadir):"
+
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign scripts/mk/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign scripts/mk/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-dist_pkgdataDATA: $(dist_pkgdata_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
+	done
+
+uninstall-dist_pkgdataDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(pkgdatadir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-dist_pkgdataDATA
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-dist_pkgdataDATA
+
+.MAKE: install-am install-data-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am \
+	install-data-hook install-dist_pkgdataDATA install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am uninstall-dist_pkgdataDATA
+
+.PRECIOUS: Makefile
+
+
+install-data-hook:
+	mv $(DESTDIR)$(pkgdatadir)/default.mk \
+	   $(DESTDIR)$(pkgdatadir)/default.mk.tmp
+	$(do_path_subst) <$(DESTDIR)$(pkgdatadir)/default.mk.tmp \
+	                 >$(DESTDIR)$(pkgdatadir)/default.mk
+	rm -f $(DESTDIR)$(pkgdatadir)/default.mk.tmp
+
+	mv $(DESTDIR)$(pkgdatadir)/buildtools.mk \
+	   $(DESTDIR)$(pkgdatadir)/buildtools.mk.tmp
+	$(do_path_subst) <$(DESTDIR)$(pkgdatadir)/buildtools.mk.tmp \
+	                 >$(DESTDIR)$(pkgdatadir)/buildtools.mk
+	rm -f $(DESTDIR)$(pkgdatadir)/buildtools.mk.tmp
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/boldquot.sed dpkg-1.20.7.1/scripts/po/boldquot.sed
--- dpkg-1.20.7.1-orig/scripts/po/boldquot.sed	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/boldquot.sed	2021-06-09 18:22:47.474275400 -0500
@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“[1m/g
+s/”/[0m”/g
+s/‘/‘[1m/g
+s/’/[0m’/g
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/ca.gmo dpkg-1.20.7.1/scripts/po/ca.gmo
--- dpkg-1.20.7.1-orig/scripts/po/ca.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/ca.gmo	2021-06-09 18:25:13.745501583 -0500
@@ -0,0 +1,649 @@
+��L|�$(1*)1|T3�3�34�4{�4<35 p5J�5@�56,/6;\6"�6�6B�687V7o7 w7�7�7�7�7�7!8()8#R8v8�8�8l�8:9(O9#x9J�90�9%:%>:d:p:-�:/�:/�:9;&M;;t;6�;�;<*<;D<%�<!�<1�<$�<S=,s=(�=4�=)�=F(>Io>H�>??%?J9?��CG"G�jH��J�L'MB(M(kM�M��M@�O<�O�P��P"KQ nQ9�Ra�T+W�DZIa�Ma�d��h�[o3>s-rs>�s5�sAtkWt��w,�xe�x{Ty�y�yzlzb�|!�~A
"O�r)Z�#��(��)сT��VP�)��2т+�30�/d�g����,�89�r�E~�#Ą��#�=�W�(u�(��ǅ�!�-#�LQ�5��FԆ>�Z�q���S��S��,O�'|���"��Ԉ2�"�9�K�\i�)Ɖ����'�?�5W�����<Ê��/�UH�����֋M��D�^�o�M��ӌ�)��'%�M�0g���!��ʍٍ�(�/�%A�g�v���8����!�3�L�[�)t�����FϏF�:]�����"ǐ���"�
?�
+M�X�1k�2��!Б��%�B�*X�,��,��*ݒ+�4�$K�+p�Y��1���(����y�.��2ȕ0��#,�1P�(��5��m�5O�
+��	��(��-×,�1�0P�3��-��,� � 1�R�b�({�0��ՙ�0�6@�w�<}���>Κ5
�/C�%s�$����'қ�� � 3�T�)s����� Ԝ���r �%�� ��=ڝB�*[���;��8ߞ� 7�
X�+f���"��)ӟ0��".�#Q�#u�&����)�<
+� G�$h���<����B�-[�!����?Ȣ�3(�:\���3���#�",�O�$n�/��äȤ�#�$&�K�_�'v�-��4̥�(�1D� v�.��-Ʀ&��7�0S�/��3��^�G�?_�9��1٨!�0-� ^�9���(ԩ��0�'F�:n�%��Ϫ�(��5'�)]�
+����.��Ϋ���-8�f�.��=���0�&?�"f�6��m��".�'Q�#y�4��4Ү1�9�S�6s�*��Aկ�,#�:P���$����װ+��1"�^T�R��[�_b�@²�,�]K�L��?��>6�0u�7��޴���
+�&��/2�b�u���*��#ڶ��
+
+�-�C�_�
l�z���6��#ܷ��6�L�@e�1��Qظ'*�R�6n�
��2��1�<�U�Cg�q��q���.��.һ��/&�5V�'��'��ܼ0�)�<F�9��l��0*�[�2p�4��3ؾB�O�
k�!y���S��%
�>3�2r�#��+��8��o.�,��$��&��.�6F�3}�%��#����%�49�-n�����.��)��!�-;�i�*��/��
��9��(*�S�o�%��%��G��E �Ef���:��&��$�6�K�2j���%������
+�'#�K�k�0����"��-��1�E�!W�y�-����*�� � &�7G�5�,��.��j�,|�.��*����6�O�m�y���.��(���� �?�[�+n�=��;��A�9V���g��x�'
+�2�K��f�o�C����O��B3�v�*��,����$��G!�Xi���	��"���.#�R�"^�����*��&��%�4�R�ro���&��#$�JH�@��1��6�=�I�B`�.��8��@�(L�Hu�H��*�2�+N�Dz�%����&�+�QI�;����A��09�Sj�T��V�j�������KZ�����N�A�W�1n�D��/��'�=�NP�@��������&>�Qe����g��d��*^�W�X�U:
+���gAK8�N�;KQp�9"BH#u�#�$/�$�$�$��$��'%�*G�**+,+C0,'t-0�-;�-h	.`r.7�.7/;C/O/@�/f0w0-�0D�01Y13p1/�10�1'21-21_2I�27�2)3=3 \35}3S�3<4XD4Q�4�4*5%65z\5z�53R63�6�6+�6 �6H7$c7�7)�7h�7=68t8*�81�8&�8C9*I9$t9H�9,�9:#:a@:�:#�:)�:a;!r;�;�;c�;'<(G<?p<@�<�<5=G=+g=�=�=�=4�=>.8>g>{>(�>@�>?$?'>?'f?�?)�?@�?'@3A@Uu@U�@I!AkA0�A6�A"�AB$B+3B_BlB!BH�BB�B0-C'^C�C�C*�C7�C?D?[D&�D.�D�D(E79E�qE*�E�!F��F%�GE�GGH7_H#�H1�H=�HG+IysIE�I
+3J	>J+HJ=tJ1�J+�J-K7>K8vK9�K�KLL-L*MLExL"�L �L'M0*M[M@aM�MV�MCN<]N.�N.�N�N2OEO7^O,�O+�O5�O+%P%QP*wP�P8�P~�P,qQ%�QP�QKR1aR"�RG�RK�R)JS'tS�S4�S �S.T07T7hT-�T1�T,U2-U"`U/�UE�U1�U3+V,_VF�V-�VWOW1mW%�W"�WK�W.4XAcXI�X5�XC%Y)iY$�Y"�Y"�Y0�Y=/ZmZ/rZG�Z+�Z,[C[^[>{[=�[K�[%D\0j\:�\,�\4].8]7g]H�]*�]8^8L^`�^�^U_GX_;�_(�_:`'@`Nh`-�`/�`a81a)ja<�a,�a!�a b,;bQhb-�b�b�b5c>c Yc!zc"�cE�c d<&dDcd&�d<�d4e*AeDle��e/;fBkf4�fA�fF%gClg$�g;�g5h;GhL�h�h5�hOibi.oi�i�i6�i9jqMji�jr)kq�kKl+Zl8�l~�l_>mY�mW�mEPnL�n/�noo6"p"YpH|p�p)�p#q40q-eq�q
�q4�q7�q r4rIrer?{rH�rs"!s$Ds*isM�sU�sZ8t)�t(�tD�t+u?Bu>�uF�uvGvav�vaw2ww2�w�w�w/�w6x.Vx9�x�x6�x-yF5y>|y��y7Iz$�zC�zC�z?.{Xn{*�{�{)	|-3|la|2�|5}G7}(}1�}@�}r~,�~$�~4�~*H@@�(�7�5+�+a�;��7ɀ��2/�Ib�#��5Ё+�E2�Fx���Fւ1�+O�"{�5��3ԃ^�^g�]Ƅ'$�WL�5��څ#��,�@F���*��̆&�#�.7�.f�-��HÇ�(&�/O�0���&ň%�,�?�%]�$��%��;Ή>
+�@I�A���̊@X�A��Fۋ!"�*D�(o�!����$ό%�<�.W�����8��;ҍ&�'5�D]�B��G�L-��A�oV`�(3��L>x@�g�l�/L��*�=J�q�0�h��F��+��c.M��^��D�[.n���I��$D|b����"���H��n�����?�~����{t���5b+�%�U:;
+�?�
+P�:�d2e��4,7��)3��&Z4&������UI�j9}�	z	0�
B%�|��G�8>"Q���Y�
~7���,��i��V��������t-�#<�y��H5�Z!`�[X��X��I�K�W�9s������/�R$h��=S_@��D
+�4'cf����N��
�2��r'�()�m.�0o��M1S>k1�+*J���B�]�a��� �$�������K/%8N�_3	*(��A�y��<1����F������]��^����p�=�s��Y?�����uL��- ��i�;:\Ov�� �2C�Q�m#7H�����P�a��!�kA)���j{E"�@g��CGG<u������K'f}�5��\�,��6#���;w�CT&w9���Fl�q�BT�O�8��r�Wxv���p�-�EzJ��6�������6Rde��E!������
+Options:
+  -a, --no-architecture    no architecture part in filename.
+  -o, --overwrite          overwrite if file exists.
+  -k, --symlink            don't create a new file, but a symlink.
+  -s, --subdir [dir]       move file into subdirectory (use with care).
+  -c, --create-dir         create target directory if not there (use with care).
+  -?, --help               show this help message.
+  -v, --version            show the version.
+
+file.deb changes to <package>_<version>_<architecture>.<package_type>
+according to the 'underscores convention'.
+
+This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+  %s (package says %s, not %s)  new version is %s  old version is %s$ORIGIN is used in RPATH of %s and the corresponding directory could not be identified due to lack of DEBIAN sub-directory in the root of package's build tree%d similar warning has been skipped (use -v to see it)%d other similar warnings have been skipped (use -v to see them all)%s and %s fields are required to compute the source basename%s contains an insecure path: %s%s contains an unresolvable reference to symbol %s: it's probably a plugin%s didn't complete in %d second%s didn't complete in %d seconds%s does not exist%s doesn't contain a valid OpenPGP signature%s doesn't contain any information about the source package%s doesn't list any binary package%s doesn't match completely %s%s field contains both global and implementation specific keywords%s field contains value %s, but no tests control file %s%s field of package %s: %s file%s has an unexpected SONAME (%s)%s is a symlink%s is a symlink to outside %s%s is empty%s is not a compression level%s is not a plain file%s is not a supported compression%s is not a supported compression method%s is not a supported variable name%s is not a valid option for %s%s is not a valid version%s is not the name of a file%s must be updated to support the 'build-arch' and 'build-indep' targets (at least '%s' seems to be missing)%s needs a parameter%s should be a directory or non-existing%s should be a file or non-existing%s should not be linked against %s (it uses none of the library's symbols)%s subprocess failed with unknown status code %d%s subprocess returned exit status %d%s subprocess was killed by signal %d%s(l%s): %s%s(l%s): %s
+LINE: %s'%s' is not a legal architecture in list '%s''%s' is not supported by the source format '%s''%s' option specifies non-existing version '%s''dpkg-deb -I %s control' exited with %d, skipping package'offset' without 'count' has no effect'since' option specifies most recent version '%s', ignoring'until' option specifies oldest version '%s', ignoring(Use -d flag to override.)--%s needs a directory--%s needs at least one argument, the .dsc--%s needs the .dsc file as first argument, not a directory--%s takes no more than two arguments--target-format option is missing-E and -W are deprecated, they are without effect-L is obsolete; it is without effect-b takes at most a directory and an orig source argument (with v1.0 source package)-b takes only one parameter with format '%s'-i%s is deprecated; it is without effect-s%s is deprecated; always using gpg style interface-s%s option overrides earlier -s%s option.orig directory name %s is not <package>-<upstreamversion> (wanted %s).orig.tar name %s is not <package>_<upstreamversion>.orig.tar (wanted %s)<control-file> is the control file to process (default: debian/control).<standard input><standard output>Build conflicts: %sBuild options:
+  -c<control-file>         get control info from this file.
+  -l<changelog-file>       get per-version info from this file.
+  -F<changelog-format>     force changelog format.
+  --format=<source-format> set the format to be used for the source package.
+  -V<name>=<value>         set a substitution variable.
+  -T<substvars-file>       read variables here.
+  -D<field>=<value>        override or add a .dsc field and value.
+  -U<field>                remove a field.
+  -i, --diff-ignore[=<regex>]
+                           filter out files to ignore diffs of
+                             (defaults to: '%s').
+  -I, --tar-ignore[=<pattern>]
+                           filter out files when building tarballs
+                             (defaults to: %s).
+  -Z, --compression=<compression>
+                           select compression to use (defaults to '%s',
+                             supported are: %s).
+  -z, --compression-level=<level>
+                           compression level to use (defaults to '%d',
+                             supported are: '1'-'9', 'best', 'fast')Commands:
+  --get <flag>       output the requested flag to stdout.
+  --origin <flag>    output the origin of the flag to stdout:
+                     value is one of vendor, system, user, env.
+  --status           output a synopsis with all parameters affecting the
+                     program behaviour, the resulting flags and their origin.
+  --query            like --status, but in deb822 format.
+  --query-features <area>
+                     output the status of features for the given area.
+  --list             output a list of the flags supported by the current vendor.
+  --export=(sh|make|cmdline|configure)
+                     output something convenient to import the compilation
+                     flags in a shell script, in make, or in a command line.
+  --dump             output all compilation flags with their values.
+  --help             show this help message.
+  --version          show the version.
+Commands:
+  --is <vendor>           returns true if current vendor is <vendor>.
+  --derives-from <vendor> returns true if current vendor derives from <vendor>.
+  --query <field>         print the content of the vendor-specific field.
+  --help                  show this help message.
+  --version               show the version.Commands:
+  -l, --list                list variables (default).
+  -L, --list-known          list valid architectures (matching some criteria).
+  -e, --equal <arch>        compare with host Debian architecture.
+  -i, --is <arch-wildcard>  match against host Debian architecture.
+  -q, --query <variable>    prints only the value of <variable>.
+  -s, --print-set           print command to set environment variables.
+  -u, --print-unset         print command to unset environment variables.
+  -c, --command <command>   set environment and run the command in it.
+  -?, --help                show this help message.
+      --version             show the version.Commands:
+  -x, --extract <filename>.dsc [<output-dir>]
+                           extract source package.
+  -b, --build <dir>        build source package.
+      --print-format <dir> print the format to be used for the source package.
+      --before-build <dir> run the corresponding source package format hook.
+      --after-build <dir>  run the corresponding source package format hook.
+      --commit [<dir> [<patch-name>]]
+                           store upstream changes in a new patch.Debian %s version %s.
+Dependency fields recognized are:
+  %s
+Dpkg::Compression::Process can only start one subprocess at a timeDpkg::Shlibs::Objdump couldn't parse %s
+Enter the desired patch name: Extract options:
+  --no-copy                don't copy .orig tarballs
+  --no-check               don't check signature and checksums before unpacking
+  --no-overwrite-dir       do not overwrite directory on extraction
+  --require-valid-signature abort if the package doesn't have a valid signature
+  --require-strong-checksums
+                           abort if the package contains no strong checksums
+  --ignore-bad-version     allow bad source package versions.File::FcntlLock not available; using flock which is not NFS-safeFormat '3.0 (custom)' is only used to create source packagesGeneral options:
+  -q                       quiet mode.
+  -?, --help               show this help message.
+      --version            show the version.Note: libraries are not searched in other binary packages that do not have any shlibs or symbols file.
+To help dpkg-shlibdeps find private libraries, you might need to use -l.OpenPGP signature not allowed hereOptions passed to dpkg-architecture:
+  -a, --host-arch <arch>      set the host Debian architecture.
+  -t, --host-type <type>      set the host GNU system type.
+      --target-arch <arch>    set the target Debian architecture.
+      --target-type <type>    set the target GNU system type.Options passed to dpkg-genchanges:
+  -si                         source includes orig, if new upstream (default).
+  -sa                         source includes orig, always.
+  -sd                         source is diff and .dsc only.
+  -v<version>                 changes since version <version>.
+  -m, --release-by=<maint>    maintainer for this release is <maint>.
+  -e, --build-by=<maint>      maintainer for this build is <maint>.
+  -C<descfile>                changes are described in <descfile>.
+      --changes-option=<opt>  pass option <opt> to dpkg-genchanges.Options passed to dpkg-source:
+  -sn                         force Debian native source format.
+  -s[sAkurKUR]                see dpkg-source for explanation.
+  -z, --compression-level=<level>
+                              compression level to use for source.
+  -Z, --compression=<compressor>
+                              compression to use for source (gz|xz|bzip2|lzma).
+  -i, --diff-ignore[=<regex>] ignore diffs of files matching <regex>.
+  -I, --tar-ignore[=<pattern>]
+                              filter out files when building tarballs.
+      --source-option=<opt>   pass option <opt> to dpkg-source.
+Options:
+  --build=<type>[,...]     specify the build <type>: full, source, binary,
+                             any, all (default is 'full').
+  -c<control-file>         get control info from this file.
+  -l<changelog-file>       get per-version info from this file.
+  -f<files-list-file>      get .deb files list from this file.
+  -F<changelog-format>     force changelog format.
+  -O[<buildinfo-file>]     write to stdout (or <buildinfo-file>).
+  -u<upload-files-dir>     directory with files (default is '..').
+  --always-include-kernel  always include Build-Kernel-Version.
+  --always-include-path    always include Build-Path.
+  --admindir=<directory>   change the administrative directory.
+  -?, --help               show this help message.
+      --version            show the version.
+Options:
+  --build=<type>[,...]     specify the build <type>: full, source, binary,
+                             any, all (default is 'full').
+  -g                       source and arch-indep build.
+  -G                       source and arch-specific build.
+  -b                       binary-only, no source files.
+  -B                       binary-only, only arch-specific files.
+  -A                       binary-only, only arch-indep files.
+  -S                       source-only, no binary files.
+  -c<control-file>         get control info from this file.
+  -l<changelog-file>       get per-version info from this file.
+  -f<files-list-file>      get .deb files list from this file.
+  -v<since-version>        include all changes later than version.
+  -C<changes-description>  use change description from this file.
+  -m<maintainer>           override control's maintainer value.
+  -e<maintainer>           override changelog's maintainer value.
+  -u<upload-files-dir>     directory with files (default is '..').
+  -si                      source includes orig, if new upstream (default).
+  -sa                      source includes orig, always.
+  -sd                      source is diff and .dsc only.
+  -q                       quiet - no informational messages on stderr.
+  -F<changelog-format>     force changelog format.
+  -V<name>=<value>         set a substitution variable.
+  -T<substvars-file>       read variables here, not debian/substvars.
+  -D<field>=<value>        override or add a field and value.
+  -U<field>                remove a field.
+  -O[<filename>]           write to stdout (default) or <filename>.
+  -?, --help               show this help message.
+      --version            show the version.
+Options:
+  --vendor <vendor>       assume <vendor> is the current vendor.Options:
+  -A             ignore Build-Depends-Arch and Build-Conflicts-Arch.
+  -B             ignore Build-Depends-Indep and Build-Conflicts-Indep.
+  -I             ignore built-in build dependencies and conflicts.
+  -d build-deps  use given string as build dependencies instead of
+                 retrieving them from control file
+  -c build-conf  use given string for build conflicts instead of
+                 retrieving them from control file
+  -a arch        assume given host architecture
+  -P profiles    assume given build profiles (comma-separated list)
+  --admindir=<directory>
+                 change the administrative directory.
+  -?, --help     show this help message.
+      --version  show the version.Options:
+  -l<library-dir>          add directory to private shared library search list.
+  -p<varname-prefix>       set <varname-prefix>:* instead of shlibs:*.
+  -O[<file>]               write variable settings to stdout (or <file>).
+  -L<local-shlibs-file>    shlibs override file, not debian/shlibs.local.
+  -T<substvars-file>       update variables here, not debian/substvars.
+  -t<type>                 set package type (default is deb).
+  -x<package>              exclude package from the generated dependencies.
+  -S<package-build-dir>    search needed libraries in the given
+                             package build directory first.
+  -I<package-build-dir>    ignore needed libraries, shlibs and symbols files
+                             in the given build directory.
+  -v                       enable verbose mode (can be used multiple times).
+  --ignore-missing-info    don't fail if dependency information can't be found.
+  --warnings=<value>       define set of active warnings (see manual page).
+  --admindir=<directory>   change the administrative directory.
+  -?, --help               show this help message.
+      --version            show the version.Options:
+  -l<library-path>         add directory to private shared library search list.
+  -p<package>              generate symbols file for package.
+  -P<package-build-dir>    temporary build directory instead of debian/tmp.
+  -e<library>              explicitly list libraries to scan.
+  -v<version>              version of the packages (defaults to
+                           version extracted from debian/changelog).
+  -c<level>                compare generated symbols file with the reference
+                           template in the debian directory and fail if
+                           difference is too important; level goes from 0 for
+                           no check, to 4 for all checks (default level is 1).
+  -q                       keep quiet and never emit any warnings or
+                           generate a diff between generated symbols
+                           file and the reference template.
+  -I<file>                 force usage of <file> as reference symbols
+                           file instead of the default file.
+  -O[<file>]               write to stdout (or <file>), not .../DEBIAN/symbols.
+  -t                       write in template mode (tags are not
+                           processed and included in output).
+  -V                       verbose output; write deprecated symbols and pattern
+                           matching symbols as comments (in template mode only).
+  -a<arch>                 assume <arch> as host architecture when processing
+                           symbol files.
+  -d                       display debug information during work.
+  -?, --help               show this help message.
+      --version            show the version.
+Options:
+  -p<package>              print control file for package.
+  -c<control-file>         get control info from this file.
+  -l<changelog-file>       get per-version info from this file.
+  -F<changelog-format>     force changelog format.
+  -v<force-version>        set version of binary package.
+  -f<files-list-file>      write files here instead of debian/files.
+  -P<package-build-dir>    temporary build directory instead of debian/tmp.
+  -n<filename>             assume the package filename will be <filename>.
+  -O[<file>]               write to stdout (or <file>), not .../DEBIAN/control.
+  -is, -ip, -isp, -ips     deprecated, ignored for compatibility.
+  -D<field>=<value>        override or add a field and value.
+  -U<field>                remove a field.
+  -V<name>=<value>         set a substitution variable.
+  -T<substvars-file>       read variables here, not debian/substvars.
+  -?, --help               show this help message.
+      --version            show the version.
+Packages in archive but missing from override file:Packages in override file but not in archive:Packages in override file with incorrect old maintainer value:Packages specifying same maintainer as override file:Packages with multiple instances but no --multiversion specified:Parser options:
+      --format <output-format>
+                           set output format (defaults to 'dpkg').
+      --reverse            include all changes in reverse order.
+      --all                include all changes.
+  -s, --since <version>    include all changes later than <version>.
+  -v <version>             ditto.
+  -u, --until <version>    include all changes earlier than <version>.
+  -f, --from <version>     include all changes equal or later than <version>.
+  -t, --to <version>       include all changes up to or equal than <version>.
+  -c, --count <number>     include <number> entries from the top (or tail
+                             if <number> is lower than 0).
+  -n <number>              ditto.
+  -o, --offset <number>    change starting point for --count, counted from
+                             the top (or tail if <number> is lower than 0).
+Positional options (order is significant):
+  <executable>             include dependencies for <executable>,
+  -e<executable>           (use -e if <executable> starts with '-')
+  -d<dependency-field>     next executable(s) set shlibs:<dependency-field>.Press <enter> to start the signing process.
+Source format specific build and extract options are available;
+use --format with --help to see them.This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Unmet build dependencies: %sUsage: %s [<command>]Usage: %s [<option>...]Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Packages
+
+Options:
+  -t, --type <type>        scan for <type> packages (default is 'deb').
+  -a, --arch <arch>        architecture to scan for.
+  -h, --hash <hash-list>   only generate hashes for the specified list.
+  -m, --multiversion       allow multiple versions of a single package.
+  -e, --extra-override <file>
+                           use extra override file.
+  -M, --medium <medium>    add X-Medium field for dselect multicd access method
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Sources
+
+Options:
+  -n, --no-sort            don't sort by package before outputting.
+  -e, --extra-override <file>
+                           use extra override file.
+  -s, --source-override <file>
+                           use file for additional source overrides, default
+                           is regular override file with .src appended.
+      --debug              turn debugging on.
+  -?, --help               show this help message.
+      --version            show the version.
+
+See the man page for the full documentation.
+Usage: %s [<option>...] <command>Usage: %s [<option>...] <executable>|-e<executable> [<option>...]Usage: %s [<option>...] <file>...
+Usage: %s [<option>...] <filename> <section> <priority>
+
+Options:
+  -f<files-list-file>      write files here instead of debian/files.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <old> <new-a> <new-b> [<out>]
+
+Options:
+  -m, --merge-prereleases  merge pre-releases together, ignores everything
+                           after the last '~' in the version.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] [<command>]Usage: %s [<option>...] [<control-file>]Use --help for program usage information.Version number suggests Ubuntu changes, but Maintainer: does not have Ubuntu addressVersion number suggests Ubuntu changes, but there is no XSBC-Original-Maintainer fieldWrote %s entries to output Packages file.abort if generated diff has upstream files changesaborting due to --abort-on-upstream-changesaborting due to unexpected upstream changes, see %saccept quilt metadata <version> even if unknownadd %s in debian/source/include-binaries if you want to store the modified binary in the debian tarballadding %s to %sadministrative directory '%s' does not existan union dependency can only contain simple dependenciesapplying %sarchitecture %s only allowed on its own (list for package %s is '%s')assuming architecture '%s' for '%s'assuming section '%s' for '%s'auto select original sourcebad binary-only value: %sbad changelog format namebad key-value after ';': '%s'bad line in substvars file %s at line %dbad package control information for '%s'badly formatted heading linebadly formatted trailer linebadly formatted urgency value: %sbadly formed line in files list file, line %dbinaries to analyze should already be installed in their package's directorybinary and diff upload (original source NOT included)binary build with no binary artifacts found; .buildinfo is meaninglessbinary build with no binary artifacts found; cannot distributebinary control file %sbinary file contents changedbinary path %s not foundbinary-only arch-indep upload (source code and arch-specific packages not included)binary-only arch-specific upload (source code and arch-indep packages not included)binary-only upload (no source code included)binary-only upload (no source included)block deviceblock lacks either %s or %s fieldsblock lacks the '%s' fieldbuild dependencies/conflicts unsatisfied; abortingbuild information filebuilding %s in %sbuilding %s using existing %sbuilding a source package without cleaning up as you asked; it might contain undesired filesbuilding source for a binary-only releasebundling: %sbzr status exited nonzerocan't build with source format '%s': %scan't create symlink %scan't extract name and version from library name '%s'can't parse dependency %scan't read directory %s: %scannot OpenPGP ASCII armor signature file due to missing gpgcannot change timestamp for %scannot close %scannot combine %s and %scannot continue due to the error abovecannot continue due to the errors listed abovecannot create directory %scannot create directory '%s'cannot create signature file %scannot determine CC system type, falling back to default (native compilation)cannot execute %s programcannot find '%s'cannot find an editorcannot find library %s needed by %s (ELF format: '%s' abi: '%s'; RPATH: '%s')cannot fork for %scannot fstat file %scannot install output buildinfo file '%s'cannot install output control file '%s'cannot make %s executablecannot merge symbols from objects without SONAMEcannot mkdir %scannot move '%s' to existing filecannot open %scannot open directory %scannot open file %scannot open file %s for binary detectioncannot opendir %scannot parse non-conformant date '%s'cannot read %scannot read link %scannot read timestamp from %scannot register changes in %s, this patch already existscannot remove %scannot represent change to %s:cannot represent change to %s: %scannot seek into file %scannot stat %scannot stat directory %scannot stat directory %s (before removal)cannot stat file %scannot stat orig argument %scannot unpack bzr-format source package because bzr is not in the PATHcannot unpack git-format source package because git is not in the PATHcannot verify signature on %s since GnuPG is not installedcannot write %scannot write signature file %schangelog format %s is unknown: %scharacter '%s' not allowedcharacter devicechdir to %scheck-command '%s' not foundchild processcloning %sclose on tar inputconflicting checksums '%s' and '%s' for file '%s'conflicting file sizes '%u' and '%u' for file '%s'continued value line not in fieldcontrol info of a .deb packagecontrol informationcopy of the debian directorycouldn't close stdoutcouldn't parse control information from %scouldn't parse dynamic relocation record: %scouldn't parse dynamic symbol definition: %screate a shallow clone with <number> depthcreate an empty original tarball if missingcreated directory '%s'creating shallow clone with depth %sdebian/rules is not executable; fixing thatdefault GNU system type %s for Debian arch %s does not match specified GNU system type %sdefine the format of the generated source packagedeprecated use of LD_LIBRARY_PATH with private library directory which interferes with cross-building, please use -l option insteaddetected %d unwanted binary file (add it in debian/source/include-binaries to allow its inclusion).detected %d unwanted binary files (add them in debian/source/include-binaries to allow their inclusion).device or socket is not alloweddiff %s modifies file %s through a symlink: %sdiff %s patches file with C-style encoded filenamediff %s removes a non-existing file %s (line %d)diff '%s' doesn't contain any patchdiff '%s' finishes in middle of ---/+++ (line %d)diff '%s' patches file %s more than oncediff '%s' patches file with name ending in .dpkg-origdiff '%s' patches files multiple times; split the diff in multiple files or merge the hunks into a single onediff '%s' patches something which is not a plain filediff on %sdirectorydirectory argument %s is not a directorydiversions involved - output may be incorrectdo not apply debian diff to upstream sourcesdo not apply patches at the end of the extractiondo not copy original source to current directorydo not extract debian tarball into upstream sourcesdo not prepare build tree by applying patchesdo not unapply patches if previously applieddoesn't contain a bzr repositorydoesn't contain a git repositorydpkg-genchangesduplicate field %s foundduplicate files in %s source package: %sduplicate files list entry for file %s (line %d)entry in dpkg's status fileentry in repository's %s fileepoch part of the version number cannot be emptyepoch part of the version number is not a number: '%s'errorexecutable mode %04o of '%s' will not be represented in diffexpected %s, got %sexpected OpenPGP signature, found end of file after blank lineexpected OpenPGP signature, found something else '%s'expected [ +-] at start of line %d of diff '%s'expected ^--- in line %d of diff '%s'expected ^@@ at line %d of diff '%s'extracting %s in %sextracting unsigned source package (%s)failed to copy %s to %sfailed to get a write lock on %sfailed to parse a line in %s: %sfailed to parse line in %s: %sfailed to rename newly-extracted %s to %sfailed to rename saved %s to %sfailed to sign %s filefailed to verify signature on %sfailed to writefailed when writing stdoutfakeroot not found, either install the fakeroot
+package, specify a command with the -r option, or run this as rootfatal error occurred while parsing %sfield cannot start with a hyphenfile %s has checksum %s instead of expected %s (algorithm %s)file %s has no final newline (either original or modified version)file %s has size %u instead of expected %ufile arguments need to existfile removal without proper filename in diff '%s' (line %d)filename, section and priority may contain no whitespacefiles stanza of copyright filefirst block lacks a Source fieldfirst headingformat v3.0 (bzr) uses only one source fileformat v3.0 (git) expected %sformat v3.0 (git) unknown file: %sformat v3.0 (git) uses only one .git fileformat v3.0 (git) uses only one .gitshallow filefound blank line where expected %sfound change data where expected %sfound end of file where expected %sfound start of entry where expected %sfound trailer where expected %sfull upload (original source is included)full upload; Debian-native package (full source is included)gain-root-command '%s' not foundgeneral section of control info filegit ls-files exited nonzerogit repository %s uses submodules; this is not yet supportedheader stanza of copyright filehost architectureif patch '%s' is correctly applied by quilt, use '%s' to update itignoring -sd option for native Debian packageignoring deletion of directory %signoring deletion of file %signoring deletion of file %s, use --include-removal to overrideignoring deletion of symlink %signoring duplicate override entry for %s at line %dignoring duplicate source override entry for %s at line %dignoring invalid week day '%s'ignoring override entry for %s, invalid priority %sillegal package name '%s': %sinclude binary files in the tarballinclude removed files in the patchinclude timestamp in the patchincluding full source code in uploadincorrect value in %s option of %s variable: %sinfoinstall new files list fileinstall new varlist file '%s'invalid abbreviated month name '%s'invalid dependency got generated: %sinvalid filename %sinvalid flag in %s: %sinvalid line in %s checksums string: %sinvalid override entry at line %d (%d fields)invalid source override entry at line %d (%d fields)invalid source version %sinvalid syntax for option in %s, line %dleave original source packed in current directorylicense stanza of copyright filelike -sa, -sk, -sp, -su, -sr but may overwriteline %d of %s is invalid, it has been ignoredline %d of %s mentions unknown flag %sline after --- isn't as expected in diff '%s' (line %d)line with unknown format (not field-colon-value)local changes detected, the modified files are:local changes have been recorded in a new patch: %slong OpenPGP key IDs are strongly discouraged; please use key fingerprints in %s or %s insteadmay not be empty stringmismatched addon orig.tar %s for signature %s in source packagemismatched orig.tar %s for signature %s in source packagemissing Priority for binary package %s; using '-'missing Priority for source filesmissing Section for binary package %s; using '-'missing Section for source filesmissing addon orig.tar for signature %s in source packagemissing changelog filenamemissing critical source control field %smissing hook %s commandmissing information for critical output field %smissing information for output field %smissing orig.tar or debian.tar file in v2.0 source packagemkdir can be used to create directorymore change data or trailermoved '%s' to '%s'multiple tarfiles in v1.0 source packagemust specify package since control info has many (%s)must start with an alphanumeric characternamed pipenamed socketnative package version may not have a revisionnative package with .orig.tarneed an action optionneed at least a filenameneed at least one executableneed exactly a filename, section and priorityneeds at least three argumentsnew libraries appeared in the symbols file: %snewly created empty file '%s' will not be represented in diffnext heading or end of fileno Package field found in '%s', skipping packageno Package field in control file of %sno binary packages specified in %sno debian/symbols file used as basis for generating %sno dependency information found for %s (used by %s)
+Hint: check if the library actually comes from a package.no files indicated on command lineno package stanza found in control infono patch name given; cannot proceedno source format specified in %s, see dpkg-source(1)no such directory '%s', try --create-dir (-c) optionno such entry found, ignoring '%s' parameter '%s'no tarfile in Files fieldno upstream tarball found at %snon-native package version does not contain a revisionnone found, starting from the oldest entrynone of the filenames in ---/+++ are valid in diff '%s' (line %d)nonexistentnot including original source code in uploadnot signing UNRELEASED build; use --force-sign to overridenoticeobsolete substitution variable ${%s}one to three arguments expectedonly supports gzip compressionoption %s is only meaningful with option %sorig argument %s is not a plain file or directoryorig argument is empty (means no orig, no diff) but source handling style -s%s wants somethingorig argument is packed but source handling style -s%s calls for unpacked (.orig/)orig argument is unpacked but source handling style -s%s calls for packed (.orig.tar.<ext>)orig directory '%s' already exists, not overwriting, giving up; use -sA, -sK or -sP to overrideoriginal and modified files are /dev/null in diff '%s' (line %d)override file %s not foundpackage %s (filename %s) has Filename field!package %s (filename %s) is repeat but newer version; used that one and ignored data from %s!package %s (filename %s) is repeat; ignored that one and using data from %s!package %s has priority %s in control file but %s in files listpackage %s has section %s in control file but %s in files listpackage %s in control file but not in files listpackage %s listed in files list but not in control infopackage %s not in control infopackage %s: package could avoid a useless dependency if %s was not linked against %s (it uses none of the library's symbols)package could avoid a useless dependency if %s were not linked against %s (they use none of the library's symbols)package's section of control info filepackage's tests control filepacked orig '%s' exists but is not a plain fileparse changes fileparsed version of changelogpatch file '%s' doesn't existpatches are not applied, applying them nowpattern '%s' did not match any filepipe for %splain filerecord generated patches, instead of abortingremove patch backup file %sreopen stdinreopen stdoutrepeated key-value %srepository's %s filerequired removal of '%s' installed by original tarballrestoring quilt backup files for %srevision cannot be emptyrm -rf failed to remove '%s'see diff output belowsetting up shallow cloneseveral orig.tar files found (%s and %s) but only one is allowedshared libs info file '%s' line %d: bad line '%s'short OpenPGP key IDs are broken; please use key fingerprints in %s or %s insteadshort option not allowed in %s, line %dsign-command '%s' not foundsignature file is already OpenPGP ASCII armor, copyingskipping '%s'some libraries disappeared in the symbols file: %ssome new symbols appeared in the symbols file: %ssome symbols or patterns disappeared in the symbols file: %ssource changed bysource directory '%s' is not <sourcepackage>-<upstreamversion> '%s'source directory is not the top directory of a bzr repository (%s/.bzr not present), but Format bzr was specifiedsource directory is not the top directory of a git repository (%s/.git not present), but Format git was specifiedsource distributionsource handling style -s%s not allowed with -bsource handling style -s%s not allowed with -xsource options<none>source packagesource package format '%s' is not supported: %ssource package has two conflicting values - %s and %ssource package name '%s' is illegal: %ssource package uses only weak checksumssource versionsource-only upload (original source is included)source-only upload: Debian-native packagesource-only, diff-only upload (original source NOT included)special mode %04o of '%s' will not be represented in diffspecified GNU system type %s does not match CC system type %s, try setting a correct CC environment variablespecify a git <ref> to include in the git bundlestart of change datasubstitution variable ${%s} unused, but is definedsubstitution variable ${%s} used, but is not definedsymbol %s used by %s found in none of the librariessymbol information must be preceded by a header (file %s, line %s)symbol name unspecified: %ssymlink to %ssyntax error in %s at line %d: %stakes no non-option argumentstarfile '%s' already exists, not overwriting, giving up; use -sU or -sR to overridetest control %s is not a regular filethe current version (%s) is earlier than the previous one (%s)the diff modifies the following upstream files: %sthe generated symbols file is emptythe header doesn't match the expected regexthe patch has fuzz which is not allowed, or is malformedthe series file (%s) contains unsupported options ('%s', line %s); dpkg-source might fail when applying patchesthe trailer doesn't match the expected regexthere are no local changes to recordthere is no diff, do main tarfile onlytoo many substitutions - recursive ? - in '%s'tried to merge the same object (%s) twice in a symfiletrust packed and unpacked original sources are sametwo commands specified: --%s and --%sunable to change permission of '%s'unable to chdir to '%s'unable to check for existence of '%s'unable to check for existence of orig directory '%s'unable to check for removal of directory '%s'unable to determine %sunable to execute %sunable to keep orig directory (already exists)unable to open shared libs info file '%s'unable to rename %s to %sunable to rename '%s' (newly created) to '%s'unable to rename '%s' to '%s'unable to stat putative unpacked orig '%s'unapply patches if previously applied (default)unapplying %suncommitted, not-ignored changes in working directory: %sunconditional maintainer override for %sunexpected end of diff '%s'unfinished OpenPGP signatureunknown %% substitution in hook: %%%sunknown %s feature in %s variable: %sunknown CC system type %s, falling back to default (native compilation)unknown Debian architecture %s, you must specify GNU system type, toounknown GNU system type %s, you must specify Debian architecture, toounknown build type %sunknown default GNU system type for Debian architecture %sunknown executable format in file '%s'unknown file typeunknown hook name %sunknown host architecture '%s'unknown information field '%s' in input data in %sunknown key-value %sunknown line from diff -u on %s: '%s'unknown option '%s'unknown option or argument %sunknown output format %sunknown output from dpkg --search: '%s'unpack original source tree toounpack target exists: %sunpacked orig '%s' exists but is not a directoryunpacking %sunrecognized dependency field '%s'unrecognized file for a %s source package: %sunrecognized file for a native source package: %sunrecognized lineunrepresentable changes to sourceunsupported checksum '%s'unsupported version of the quilt metadata: %sunwanted binary file: %supstream files that have been modified: %supstream version cannot be emptyuse a single debianization patchuse newest entry that is earlier than the one specifieduse oldest entry that is later than the one specifieduse packed original source (unpack and keep)use packed original source (unpack and remove)use the '3.0 (quilt)' format to have separate and documented changes to upstream files, see dpkg-source(1)use unpacked original source (pack and keep)use unpacked original source (pack and remove)using a gain-root-command while being rootusing options from %s: %susing patch list from %susing source format '%s'vendor %s doesn't exist in %svendor fileversion '%s' is invalid: %sversion number cannot be emptyversion number contains illegal character '%s'version number does not start with digitwait for %swarningwrite diversion info to stderrwrite error on control datawrite on tar inputyou can integrate the local changes with %syou can only specify one of 'from' and 'since', using 'since'you can only specify one of 'to' and 'until', using 'until'you can't combine 'count' or 'offset' with any other range optionyou can't use symver tag to catch unversioned symbols: %sProject-Id-Version: dpkg-dev 1.19.7
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2019-05-09 05:38+0200
+Last-Translator: Guillem Jover <guillem@debian.org>
+Language-Team: Catalan <debian-l10n-catalan@lists.debian.org>
+Language: ca
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=n!=1;
+
+Opcions:
+  -a, --no-architecture    no afegeix la part d'arquitectura al nom de fitxer.
+  -o, --overwrite          sobreescriu el fitxer si existeix.
+  -k, --symlink            crear un enllaç simbòlic i no un fitxer nou.
+  -s, --subdir [<dir>]     mou el fitxer al <dir> (empreu amb cura).
+  -c, --create-dir         crea el <dir> destí si no existeix (empreu amb cura).
+  -?, --help               mostra aquest missatge d'ajuda.
+  -v, --version            mostra la versió.
+
+fitxer.deb canvia a <paquet>_<versió>_<arquitectura>.<tipus_de_paquet>
+d'acord amb la “convenció de caràcters de subratllat”.
+
+Aquest és programari lliure; vegeu la Llicència Pública General GNU versió 2 o posterior per a les condicions de còpia. NO hi ha garantia.
+  %s (el paquet especifica %s, i no %s)  la versió nova és %s  la versió antiga és %sl'RPATH de %s empra $ORIGIN, i el directori corresponent no s'ha pogut identificar a causa de la manca de subdirectori DEBIAN en l'arrel de l'arbre de construcció del paquets'ha ignorat %d avís similar (empreu -v per veure'l)s'han ignorat %d avisos similars (empreu -v per veure'ls)els camps %s i %s són necessaris per calcular el nom base del font%s conté un no segur: %s%s conté una referència no resolta al símbol %s: segurament és un connector%s no s'ha completat en %d segon%s no s'ha completat en %d segons%s no existeix%s no conté una signatura OpenPGP vàlida%s no conté cap informació del paquet font%s no conté cap paquet binari%s no coincideix completament amb %sel camp %s conté paraules clau globals i especifiques d'implementacióel camp %s conté el valor %s, però el fitxer de control de verificació %s no existeixcamp %s del paquet %s: fitxer %s%s conté un SONAME (%s) inesperat%s és un enllaç simbòlic%s és un enllaç simbòlic a l'exterior de %s%s és buit%s no és un nivell de compressió%s no és un fitxer normal%s no es una compressió admesa%s no és un mètode de compressió admès%s no és un nom de variable gestionat%s no és una opció vàlida per a %s%s no és una versió vàlida%s no és el nom d'un fitxers'ha d'actualitzar %s per admetre els objectius «build-arch» i «build-indep» (almenys sembla que manca «%s»)%s requereix un paràmetre%s ha de ser un directori o no existir%s ha de ser un fitxer o no existir%s no hauria d'estar vinculat a %s (no empra cap símbol de la biblioteca)el subprocés «%s» ha fallat amb el codi d'estat desconegut %del subprocés «%s» ha retornat codi d'eixida %del subprocés «%s» ha estat finalitzat pel senyal %d%s(l%s): %s%s(l%s): %s
+LÍNIA: %s«%s» no és una cadena d'arquitectura vàlida a la llista «%s»«%s» no és admès pel format de font «%s»l'opció «%s» especifica una versió «%s» inexistent«dpkg-deb -I %s control» ha sortit amb %d, s'ometrà el paquet«offset» sense «count» no té efectel'opció «since» especifica la versió «%s» més recent, s'ignoraràl'opció «until» especifica la versió «%s» més antiga, s'ignorarà(Empreu el senyalador -d per a ometre-ho.)--%s necessita un directori--%s necessita almenys un argument, el .dsc--%s necessita el fitxer .dsc com a primer argument, no un directori--%s no accepta més de dos argumentsmanca l'opció --target-format-E i -W són obsolets, no tenen efecte-L és obsolet; no té efecte-b accepta com a molt un directori i un argument orig font (amb paquet font v1.0)l'opció -b només admet un paràmetre amb el format «%s»-i%s és obsolet; no té efecte-s%s és obsolet; sempre s'utilitzarà la interfície d'estil gpgl'opció -s%s sobreescriu l'opció -s%s anteriorel nom del directori .orig %s no és <paquet-font>-<versió-original> (desitjat %s)el nom del fitxer .orig.tar %s no és <paquet-font>_<versió-original> (desitjat %s)<fitxer-control> és el fitxer de control a processar (predeterminat: debian/control).<entrada estàndard><eixida estàndard>Conflictes de construcció: %sOpcions de construcció:
+  -c<fitxer-control>       fitxer d'informació de control.
+  -l<fitxer-registre>      fitxer del registre de canvis.
+  -F<format-registre>      força el format del registre de canvis.
+  --format=<format-font>   estableix el format del paquet font.
+  -V<nom>=<valor>          estableix una variable de substitució.
+  -T<fitxer-variables>     fitxer de les variables de substitució.
+  -D<field>=<value>        afegeix o sobreescriu un camp i valor al .dsc.
+  -U<field>                suprimeix un camp.
+  -i, --diff-ignore[=<regex>]
+                           ignora els diffs de fitxers que concorden amb regex
+                             (predeterminat a: «%s»).
+  -I, --tar-ignore[=<patró>]
+                           filtra fitxers al construir l'arxiu tar
+                             (predeterminat a: %s).
+  -Z, --compression=<compressió>
+                           tipus de compressió (predeterminat a «%s»,
+                             són admesos: %s).
+  -z, --compression-level=<nivell>
+                           nivell de compressió (predeterminat a «%d»,
+                             són admesos: ‘1’-‘9’, ‘best’, ‘fast’)Ordres:
+  --get <senyalador> mostra el senyalador sol·licitat a stdout.
+  --origin <senyalador>
+                     mostra l'origen del senyalador a stdout, el valor és:
+                       vendor, system, user, env.
+  --status           mostra una sinopsis amb tots els paràmetres que afecten
+                       el comportament de dpkg-buildflags, els senyaladors
+                       resultants i els seus orígens.
+  --query            com --status, però en format deb822.
+  --query-features <àrea>
+                     mostra l'estat de les característiques de l'àrea donada.
+  --list             mostra la llista de senyaladors admesos per el proveïdor
+                       actual.
+  --export=(sh|make|cmdline|configure)
+                     mostra codi per importar els senyaladors de compilació
+                       a un guió d'ordres, a make o a la línia d'ordres.
+  --dump             mostra tots els senyaladors de compilació amb els seus
+                       valors.
+  --help             mostra aquest missatge d'ajuda.
+  --version          mostra la versió.
+Ordres:
+  --is <proveïdor>        torna vertader si el proveïdor actual és <proveïdor>.
+  --derives-from <proveïdor>
+                          torna vertader si el proveïdor actual deriva de
+                            <proveïdor>.
+  --query <camp>          mostra el contingut del camp específic del proveïdor.
+  --help                  mostra aquest missatge d'ajuda.
+  --version               mostra la versió.Ordres:
+  -l, --list                llista variables (predeterminat).
+  -L, --list-known          llista arquitectures vàlides (combinant alguns criteris).
+  -e, --equal <arq>         compara amb l'arquitectura amfitrió de Debian.
+  -i, --is <comodí-arq>     concorda amb l'arquitectura amfitrió de Debian.
+  -q, --query <variable>    mostra només el valor de <variable>.
+  -s, --print-set           mostra ordres per assignar les variables d'entorn.
+  -u, --print-unset         mostra ordres per suprimir les variables d'entorn.
+  -c, --command <ordre>     configura l'entorn i executa-hi l'ordre.
+  -?, --help                mostra aquest missatge d'ajuda.
+      --version             mostra la versió.Ordres:
+  -x, --extract <fitxer>.dsc [<dir-sortida>]
+                           extreu el paquet font.
+  -b, --build <dir>        construeix el paquet font.
+      --print-format <dir> mostra el format a emprar per al paquet font.
+      --before-build <dir> executa el lligam corresponent al format del
+                             paquet font.
+      --after-build <dir>  executa el lligam corresponent al format del
+                             paquet font.
+      --commit [<dir> [<nom-de-pedaç>]]
+                           desa canvis als fitxers originals en un pedaç nou.Debian %s versió %s.
+Els camps de dependències reconeguts són:
+  %s
+Dpkg::Compression::Process només pot iniciar un subprocés cada copDpkg::Shlibs::Objdump no ha pogut analitzar %s
+Introduïu el nom desitjat del pedaç: Opcions d'extracció:
+  --no-copy                no copia l'arxiu tar «.orig».
+  --no-check               no verifica la signatura ni la suma de verificació
+                             abans del desempaquetat.
+  --require-valid-signature
+                           interromp si el paquet no té una signatura vàlida.
+  --require-strong-checksums
+                           interromp si el paquet no té sumes de verificació
+                             fortes.
+  --ignore-bad-version     permet versions de font no vàlides.File::FcntlLock no està disponible; s'emprarà flock que no és segur per NFSel format «3.0 (custom)» només s'empra per crear paquets fontOpcions generals:
+  -q                       mode silenciós.
+  -?, --help               mostra aquest missatge d'ajuda.
+      --version            mostra la versió.Nota: les biblioteques no es cerquen en altres paquets binaris sense fitxers
+shlibs o symbols.
+Per ajudar a dpkg-shlibdeps a trobar biblioteques privades, podeu necessitar
+emprar -l.no s'admet aquí una signatura OpenPGPOpcions passades a dpkg-architecture:
+  -a, --host-arch <arq>       estableix l'arquitectura amfitrió de Debian.
+  -t, --host-type <tipus>     estableix el tipus de sistema amfitrió GNU.
+      --target-arch <arq>     estableix l'arquitectura objectiu de Debian.
+      --target-type <tipus>   estableix el tipus de sistema objectiu GNU.Opcions passades a dpkg-genchanges:
+  -si                         el font inclou l'orig, si és un nou original
+                                (predeterminat).
+  -sa                         el font inclou l'orig, sempre.
+  -sd                         el font és només el diff i el .dsc.
+  -v<versió>                  inclou canvis des de la versió <versió>.
+  -m, --release-by=<mantenidor>
+                              el mantenidor del llançament és <mantenidor>.
+  -e, --build-by=<mantenidor> el mantenidor de la construcció és <mantenidor>.
+  -C<fitxerdesc>              els canvis es descriuen a <fitxerdesc>.
+      --changes-option=<opció>
+                              passa l'opció <opció> a dpkg-genchanges.Opcions passades a dpkg-source:
+  -sn            força el format de font nadiu de Debian.
+  -s[sAkurKUR]   vegeu dpkg-source per a més informació.
+  -z, --compression-level=<nivell>
+                 nivell de compressió per al font.
+  -Z, --compression=<compressor>
+                 tipus de compressió per al font (gz|xz|bzip2|lzma).
+  -i, --diff-ignore[=<regex>]
+                 ignora els diffs de fitxers que concorden amb regex.
+  -I, --tar-ignore[=<patró>]
+                 filtra fitxers al construir l'arxiu tar.
+      --source-option=<opció>
+                 passa l'opció <opció> a dpkg-source.
+  --build=<tipus>[,…]      especifica el <tipus> de construcció: full,
+                             source, binary, any, all (predeterminat a “full”).
+  -c<fitxer-control>       fitxer d'informació de control.
+  -l<fitxer-registre>      fitxer del registre de canvis.
+  -f<fitxer-de-fitxers>    fitxer amb la llista de fitxers a publicar.
+  -F<format-registre>      força el format del registre de canvis.
+  -O[<fitxer-buildinfo>]   escriu a stdout (o <fitxer-buildinfo>).
+  -u<dir-publicació>       directori amb fitxers a publicar (predeterminat a «..»).
+  --always-include-kernel  inclou sempre el camp Build-Kernel-Version.
+  --always-include-path    inclou sempre el camp Build-Path.
+  --admindir=<directori>   canvia el directori administratiu.
+  -?, --help               mostra aquest missatge d'ajuda.
+      --version            mostra la versió.
+Opcions:
+  --build=<tipus>[,…]      especifica el <tipus> de construcció: full, source,
+                             binary, any, all (predeterminat a “full”).
+  -g                       només fonts i fitxers independents d'arquitectura.
+  -G                       només fonts i fitxers dependents d'arquitectura.
+  -b                       només binaris, sense fitxers font.
+  -B                       només binaris (fitxers dependents d'arquitectura).
+  -A                       només binaris (fitxers independents d'arquitectura).
+  -S                       només fonts, sense fitxers binaris.
+  -c<fitxer-control>       fitxer d'informació de control.
+  -l<fitxer-registre>      fitxer del registre de canvis.
+  -f<fitxer-de-fitxers>    fitxer amb la llista de fitxers a publicar.
+  -v<versió>               inclou tots els canvis posteriors a <versió>.
+  -C<descripció-canvis>    fitxer amb la descripció dels canvis.
+  -m<mantenidor>           substitueix el valor del mantenidor de control.
+  -e<mantenidor>           substitueix el valor del mantenidor del registre
+                             de canvis.
+  -u<dir-publicació>       directori amb fitxers a publicar (predeterminat a «..»).
+  -si (predeterminat)      el font inclou l'orig, si és un nou original.
+  -sa                      el font inclou l'orig, sempre.
+  -sd                      el font és només el diff i el .dsc.
+  -q                       mode silenciós, sense missatges d'informació a stderr.
+  -F<format-registre>      força el format del registre de canvis.
+  -V<nom>=<valor>          estableix una variable de substitució.
+  -T<fitxer-substitució>   fitxer de les variables de substitució, i no
+                             debian/substvars.
+  -D<camp>=<valor>         afegeix o sobreescriu un camp i valor.
+  -U<camp>                 suprimeix un camp.
+  -O[<fitxer>]             escriu les variables a stdout (predeterminat)
+                             o al <fitxer>.
+  -?, --help               mostra aquest missatge d'ajuda.
+      --version            mostra la versió.
+Opcions:
+  --vendor <proveïdor>    assumeix que <proveïdor> és el proveïdor actual.Opcions:
+  -A             ignora Build-Depends-Arch i Build-Conflicts-Arch.
+  -B             ignora Build-Depends-Indep i Build-Conflicts-Indep.
+  -I             ignora dependències i conflictes de construcció incorporades.
+  -d <dep>       empra la cadena donada com dependències de construcció en
+                   comptes d'obtenir-les del fitxer de control.
+  -c <dep>       empra la cadena donada com conflictes de construcció en
+                   comptes d'obtenir-les del fitxer de control.
+  -a <arq>       assumeix l'arquitectura amfitrió especificada.
+  -P <perfils>   assumeix els perfils de construcció especificats (llista
+                   de valors separats per comes).
+  --admindir=<directori>
+                 canvia el directori administratiu.
+  -?, --help     mostra aquest missatge d'ajuda.
+      --version  mostra la versió.Opcions:
+  -l<directori>            afegeix el directori a la llista de cerca de
+                             biblioteques compartides privades.
+  -p<prefix-variable>      estableix <prefix-variable>:* en comptes de shlibs:*.
+  -O[<fitxer>]             escriu les variables a stdout (o al <fitxer>).
+  -L<fitxer-shlibs-local>  fitxer de substitució de shlibs, no debian/shlibs.local.
+  -T<fitxer-substitució>   fitxer de variables, no debian/substvars.
+  -t<tipus>                estableix el tipus de paquet (per defecte és deb).
+  -x<paquet>               exclou el paquet de les dependències generades.
+  -S<dir-construcció>      cerca les biblioteques necessàries primer al
+                             directori de construcció del paquet.
+  -I<dir-construcció>      ignora biblioteques, fitxers shlibs i fitxers
+                             symbols necessaris del directori de construcció.
+  -v                       activa el mode detallat (es pot emprar múltiples cops).
+  --ignore-missing-info    no falla si no es pot trobar la informació de
+                             dependències.
+  --warnings=<valor>       defineix el conjunt d'avisos actius (vegeu la pàgina de manual).
+  --admindir=<directori>   canvia el directori administratiu.
+  -?, --help               mostra aquest missatge d'ajuda.
+      --version            mostra la versió.Opcions:
+  -l<directori>            afegeix el directori a la llista de cerca de
+                             biblioteques compartides privades.
+  -p<paquet>               genera el fitxer de símbols per a <paquet>.
+  -P<dir-construcció>      directori temporal de construcció, i no debian/tmp.
+  -e<biblioteca>           llista explicita de biblioteques a cercar.
+  -v<versió>               versió dels paquets (predeterminada a la versió
+                             extreta de debian/changelog).
+  -c<nivell>               compara el fitxer de símbols generat amb la
+                             plantilla de referència al directori de debian i
+                             falla si les diferencies són massa importants; el
+                             nivell va de 0 per no verificació a 4 per a totes
+                             les verificacions (predeterminat a 1).
+  -q                       mode silenciós, no emet cap avís ni genera diff
+                             entre el fitxer generat de símbols i la
+                             plantilla de referència.
+  -I<fitxer>               força l'ús de <fitxer> com a fitxer de símbols de
+                             referència en comptes del fitxer predeterminat.
+  -O[<fitxer>]             escriu a stdout (o <fitxer>), i no a
+                             …/DEBIAN/symbols.
+  -t                       escriu en mode plantilla (les etiquetes no es
+                             processen ni s'inclouen a la sortida).
+  -V                       sortida detallada; escriu símbols obsoletes i símbols
+                             concordants amb patrons com a comentaris (només en
+                             mode de plantilla).
+  -a<arq>                  empra <arq> com arquitectura amfitrió en analitzar
+                             fitxers de símbols.
+  -d                       mostra informació de depuració.
+  -?, --help               mostra aquest missatge d'ajuda.
+      --version            mostra la versió.
+Opcions:
+  -p<paquet>               mostra el fitxer de control per al paquet.
+  -c<fitxer-control>       fitxer d'informació de control.
+  -l<fitxer-registre>      fitxer del registre de canvis.
+  -F<format-registre>      força el format del registre de canvis.
+  -v<versió-binari>        estableix la versió del paquet binari.
+  -f<fitxer-de-fitxers>    fitxer amb la llista de fitxers a publicar, i no
+                             a debian/files.
+  -P<dir-construcció>      directori temporal de construcció, i no debian/tmp.
+  -n<fitxer>               assumeix que el nom de fitxer del paquet serà
+                             <fitxer>.
+  -O[<fitxer>]             escriu les variables a stdout (o al <fitxer>), i no
+                             a …/DEBIAN/control.
+  -is, -ip, -isp, -ips     obsoletes, s'ignoren per compatibilitat.
+  -D<camp>=<valor>         afegeix o sobreescriu un camp i valor.
+  -U<camp>                 suprimeix un camp.
+  -V<nom>=<valor>          estableix una variable de substitució.
+  -T<fitxer-substitució>   fitxer de les variables de substitució, i no
+                             debian/substvars.
+  -?, --help               mostra aquest missatge d'ajuda.
+      --version            mostra la versió.
+Paquets a l'arxiu però no presents en el fitxer de substitució:Paquets en el fitxer de substitució però on a l'arxiu:Paquets en el fitxer de substitució amb valor antic de mantenidor incorrecte:Paquets amb el mateix mantenidor al fitxer de substitució:Paquets amb múltiples instancies però no s'ha especificat --multiversion:Opcions de l'analitzador:
+      --format <format-sortida>
+                           vegeu la pàgina de manual per la llista de formats
+                             de sortida disponibles, el valor predeterminat
+                             és «dpkg».
+      --reverse            inclou tots els canvis en ordre invertit.
+      --all                inclou tots els canvis.
+  -s, --since <versió>     inclou tots els canvis posteriors a <versió>.
+  -v <versió>              ídem.
+  -u, --until <versió>     inclou tots els canvis anteriors a <versió>.
+  -f, --from <versió>      inclou tots els canvis iguals o posteriors a
+                             <versió>.
+  -t, --to <versió>        inclou tots els canvis fins o iguals a <versió>.
+  -c, --count <número>     inclou el <número> d'entrades des del principi,
+                             o des del final si <número> és inferior a 0.
+  -n <número>              ídem.
+  -o, --offset <número>    canvia el punt d'inici per a --count, contant
+                             des del principi, o des del final si <número>
+                             és inferior a 0.
+Opcions posicionals (l'ordre és significatiu):
+  <executable>             inclou dependències per <executable>,
+  -e<executable>             (empreu -e si <executable> comença amb ‘-’).
+  -d<camp-dependència>     el següent executable(s) estableix
+                             shlibs:<camp-dependència>.Premeu la tecla de <retorn> per a començar el procés de signat.
+Hi ha opcions de construcció i extracció específiques de format de font;
+empreu --format amb --help per veure-les.Aquest és programari lliure; vegeu la Llicència Pública General GNU versió 2 o posterior per a les condicions de còpia. NO hi ha garantia.
+Dependències de construcció no satisfetes: %sFormat d'ús: %s [<ordre>]Forma d'ús: %s [<opció>…]Format d'ús: %s [<opció>…] <camí-binari> [<fitxer-subsitutció> [<prefix-camí>]] > Packages
+
+Opcions:
+  -t, --type <tipus>       cerca paquets de <tipus> («deb» és el predeterminat).
+  -a, --arch <arq>         arquitectura a cercar.
+  -h, --hash <llista>      genera només les sumes de resum llistades.
+  -m, --multiversion       permet múltiples versions de cada paquet.
+  -e, --extra-override <fitxer>
+                           empra el fitxer de substitució extra.
+  -M, --medium <mitjà>     afegeix el camp X-Medium per al mètode d'accés
+                             multicd de dselect.
+  -?, --help               mostra quest missatge d'ajuda.
+      --version            mostra la versió.
+Forma d'ús: %s [<opció>…] <camí-binari> [<fitxer-substitució> [<prefix-camí>]] > Sources
+
+Opcions:
+  -n, --no-sort            no ordena els paquets de sortida.
+  -e, --extra-override <fitxer>
+                           empra el fitxer de substitució extra.
+  -s, --source-override <fitxer>
+                           empra el fitxer de substitució de font addicional
+                             per defecte és el fitxer de substitució normal amb
+                             «.src» afegit.
+      --debug              activa la depuració.
+  -?, --help               mostra aquest missatge d'ajuda.
+      --version            mostra la versió.
+
+Vegeu la pàgina de manual per a la documentació completa.
+Forma d'ús: %s [<opció>…] <ordre>Forma d'ús: %s [<opció>…] <executable>|-e<executable> [<opció>…]Forma d'ús: %s [<opció>…] <fitxer>…
+Forma d'ús: %s [<opció>…] <nom-de-fitxer> <secció> <prioritat>
+
+Opcions:
+  -f<fitxer-de-fitxers>    escriu fitxers aquí en comptes de debian/files.
+  -?, --help               mostra aquest missatge d'ajuda.
+      --version            mostra la versió.
+Forma d'ús: %s [<opció> …] <antic> <nou-a> <nou-b> [<eixida>]
+
+Opcions:
+  -m, --merge-prereleases  fusiona prellançaments, omet qualsevol cosa
+                             després de l'últim «~» a la versió.
+  -?, --help               mostra aquest missatge d'ajuda.
+      --version            mostra la versió.
+Forma d'ús: %s [<opció>…] [<ordre>]Forma d'ús: %s [<opció>…] [<fitxer-control>]Empreu --help per a obtenir informació d'ús del programa.el número de versió suggereix canvis d'Ubuntu, però el camp Maintainer no conté una adreça d'Ubuntuel número de versió suggereix canvis d'Ubuntu, però no hi ha un camp XSBC-Original-MaintainerS'han escrit %s entrades al fitxer Packages de sortida.interromp si el diff generat modifica fitxers originalss'està interrompent a causa de --abort-on-upstream-changess'està interrompent a causa de canvis inesperats als fonts originals, vegeu %saccepta <versió> de metadades de quilt encara que no es coneguiafegiu %s a debian/source/include-binaries si voleu desar el binari modificat en l'arxiu tar de debians'està afegint %s a %sel directori administratiu «%s» no existeixuna dependència d'unió només pot contenir dependències senzilless'està aplicant %snomés es permet la arquitectura %s pel seu compte (la llista pel paquet %s és “%s”)s'està assumint l'arquitectura «%s» per a «%s»s'està assumint la secció «%s» per a «%s»selecciona el codi font original automàticamentvalor incorrecte de «binary-only»: %sel format %s del registre de canvis no és vàlidclau-valor no vàlida després de ‘;’: «%s»línia errònia al fitxer de substitució de variables %s en la línia %dinformació de control del paquet errònia per a «%s»línia d'encapçalament amb format erronilínia final amb format erronivalor d'urgència mal format: %slínia mal formada en la llista de fitxers, línia %dels binaris a analitzar haurien d'estar instal·lats en el directori del seu paquetpujada de binaris i diff (NO s'inclou el codi font original)no s'ha trobat cap artefacte binari en construcció binaria; el .buildinfo no té sentitno s'ha trobat cap artefacte binari en construcció binaria; no es pot distribuirfitxer de control binari %sha canviat el contingut d'un fitxer binarino s'ha trobat el camí del binari %spujada només de binaris independents d'arquitectura (no s'inclouen el codi font ni els paquets dependents d'arquitectura)pujada només de binaris dependents d'arquitectura (no s'inclouen el codi font ni els paquets independents d'arquitectura)pujada només de binaris (no s'inclou el codi font)pujada de només binaris (no s'inclou el codi font)dispositiu de blocel bloc no conté els camps «%s» o «%s»el bloc no conté el camp «%s»dependències/conflictes de construcció no satisfetes; s'està avortantfitxer d'informació de construcciós'està construint %s a %ss'està construint %s emprant %s existents'esta construint un paquet font sense netejar-lo, com heu demanat; podria contenir fitxers no desitjatss'està construint el font per a un llançament només binariagrupant: %s«bzr status» ha sortit amb valor no zerono es pot construir amb format de font «%s»: %sno es pot crear l'enllaç simbòlic %sno es pot extreure el nom i la versió del nom de biblioteca «%s»no s'ha pogut analitzar la dependència %sno es pot llegir el directori %s: %sno es pot armar el fitxer de signatura en OpenPGP ASCII ja que manca gpgno es pot canviar la marca horària per a %sno es pot tancar %sno es pot combinar %s amb %sno es pot continuar a causa de l'error anteriorno es pot continuar a causa dels errors anteriorsno es pot crear el directori %sno es pot crear el directori «%s»no es pot crear el fitxer de signatura %sno es pot determinar el tipus de sistema de CC, s'emprarà el predeterminat (construcció nadiua)no es pot executar el programa %sno s'ha trobat «%s»no s'ha trobat un editorno s'ha trobat la biblioteca %s necessària per %s (format ELF: «%s»; ABI: «%s»; RPATH: «%s»)no es pot fer «fork» per a %sno es pot fer «fstat» al fitxer «%s»no s'ha pogut instal·lar el fitxer buildinfo de sortida «%s»no s'ha pogut instal·lar el fitxer de control de sortida «%s»no es pot fer «%s» executableno es poden fusionar símbols d'objectes sense SONAMEno es pot crear el directori %sno es pot moure «%s» a un fitxer existentno es pot obrir %sno es pot obrir el directori %sno es pot obrir el fitxer %sno es pot obrir el fitxer %s per a detecció binariano es pot obrir el directori %sno es pot analitzar la data no conforme «%s»no es pot llegir %sno es pot llegir l'enllaç %sno es pot llegir la marca horària de %sno es poden registrar els canvis a %s, aquest pedaç ja existeixno es pot eliminar %sno es pot representar el canvi a %s:no es pot representar el canvi a %s: %sno es pot reposicionar al fitxer «%s»no es pot fer «stat» a «%s»no es pot fer «stat» sobre el fitxer %sno es pot fer «stat» al directori %s (abans de la eliminació)no es pot fer «stat» al fitxer «%s»no es pot fer «stat» sobre l'argument original %sno es pot desempaquetar el paquet font amb format bzr ja que bzr no és troba al PATHno es pot desempaquetar el paquet font amb format git ja que git no és troba al PATHno es pot verificar la signatura de %s perquè GnuPG no està instal·latno es pot escriure %sno es pot escriure el fitxer de signatura «%s»el format %s del registre de canvis és desconegut: %sel caràcter «%s» no és permèsdispositiu de caràcter«chdir» a %sno s'ha trobat l'ordre-per-verificar «%s»procés fills'està clonant %sno es pot tancar l'entrada de tarsumes de verificació contradictòries «%s» i «%s» pel fitxer «%s»mides de fitxer contradictòries «%u» i «%u» pel fitxer «%s»línia de continuació de valor no està al campinformació de control d'un paquet .debinformació de controlcopia del directori debianno s'ha pogut tancar la sortida estàndardno s'ha pogut analitzar la informació de control de %sno s'ha pogut analitzar el registre dinàmic de reubicació: %sno s'ha pogut analitzar la definició dinàmica del símbol: %screa un clon amb profunditat <número>crea un arxiu original tar buit si no existeixs'ha creat el directori «%s»s'esta creant un clon amb profunditat %sdebian/rules no és executable: s'està corregint aixòel tipus de sistema GNU predeterminat %s per a la arquitectura de Debian %s no coincideix amb el tipus de sistema GNU especificat %sdefineix el format del paquet font generatús obsolet de LD_LIBRARY_PATH amb directori de biblioteques privades que interfereix amb la compilació creuada, empreu l'opció -l en el seu llocs'ha detectat %d fitxer binari no desitjat (afegiu-lo a debian/source/include-binaries per permetre la seva inclusió).s'han detectat %d fitxers binaries no desitjats (afegiu-los a debian/source/include-binaries per permetre la seva inclusió).no es permeten dispositius ni sòcolsel diff %s modifica el fitxer %s a través d'un enllaç simbòlic: %sel diff «%s» aplica pedaços a un fitxer amb nom codificat en estil Cel diff %s elimina un fitxer no existent %s (línia %d)el diff «%s» no conté cap pedaçel diff «%s» acaba enmig de ---/+++ (línia %d)el diff «%s» aplica pedaços al fitxer %s més d'una vegadael diff «%s» aplica pedaços a un fitxer amb nom acabat en .dpkg-origel diff «%s» aplica pedaços a fitxers múltiples vegades; separeu el diff en múltiples fitxers o combineu els trossosel diff «%s» aplica pedaços a alguna cosa que no és un fitxer pladiff de %sdirectoril'argument directori %s no és un directorihi ha desviacions involucrades, la sortida pot ser incorrectano aplica el diff de debian a les fonts originalsno aplica pedaços al final de l'extraccióno copia la font original al directori actualno s'extreu l'arxiu tar de debian a les fonts originalsno prepara l'arbre de construcció aplicant els pedaçosno desfà l'aplicació dels pedaços si ja estan aplicatsno conté un dipòsit bzrno conté un dipòsit gitdpkg-genchangess'ha trobat un camp %s duplicatfitxers duplicats en el paquet font %s: %sentrada duplicada a la llista de fitxers per al fitxer %s (línia %d)entrada al fitxer d'estat del dpkgentrada al fitxer de dipòsit %sl'època en la versió no pot ser buidal'època en la versió no és un número: «%s»errorel mode executable %04o de «%s» no es representarà en el diffs'esperava %s, s'ha obtingut %ss'esperava una signatura OpenPGP, s'ha trobat el fi de fitxer desprès de línia buidas'esperava una signatura OpenPGP, s'ha trobat una altra cosa «%s»s'esperava [ +-] al principi de la línia %d del diff «%s»s'esperava ^--- a la línia %d del diff «%s»s'esperava ^@@ en la línia %d del diff «%s»s'està extraient %s a %ss'està extraient el paquet font sense signar (%s)no es pot copiar %s a %sno s'ha pogut obtenir el blocatge d'escriptura per a %sno s'ha pogut analitzar una línia en %s: %sno s'ha pogut analitzar la línia en %s: %sno es pot canviar el nom de %s acabat d'extraure a %sno es pot canviar el nom de %s guardat a %sno s'ha pogut signar el fitxer «%s»no s'ha pogut verificar la signatura de %sno s'ha pogut escriures'ha produït un error en escriure la sortida estàndardno s'ha trobat fakeroot, instal·leu el paquet fakeroot,
+especifiqueu una ordre amb l'opció -r, o executeu-ho com superusuaris'ha produït un error fatal en analitzar %sel camp no pot començar amb un guióel fitxer %s té suma de verificació %s en lloc de l'esperada %s (algorisme %s)el fitxer %s no té línia final (tant la versió original o la modificada)el fitxer %s té mida %u en lloc de l'esperada %uels arguments fitxer han d'existireliminació de fitxer sense nom de fitxer en el diff «%s» (línia %d)el nom de fitxer, la secció i la prioritat no poden contenir espais blancsestrofa de fitxer del fitxer de copyrightel primer bloc no conté un camp Sourceprimer encapçalamentel format v3.0 (bzr) només empra un sol fitxer fontel format v3.0 (git) esperava %sfitxer desconegut per al format v3.0 (git): %sel format v3.0 (git) només empra un fitxer .gitel format v3.0 (git) només empra un fitxer .gitshallows'ha trobat una línia buida on s'esperava %ss'ha trobat informació de canvi on s'esperava %ss'ha trobat el fi de fitxer on s'esperava %ss'ha trobat el principi d'entrada on s'esperava %ss'ha trobat final on s'esperava %spujada sencera (s'inclou el codi font original)pujada sencera; paquet nadiu de Debian (s'inclou el codi font sencer)no s'ha trobat l'ordre-assolir-superusuari «%s»secció general del fitxer d'informació de control«git ls-files» ha sortit amb valor no zeroel dipòsit git %s empra submòduls; això encara no està implementatestrofa de capçalera del fitxer de copyrightarquitectura de l'amfitriósi quilt aplica el pedaç «%s» correctament, empreu «%s» per actualitzar-los'omet l'opció -sd per al paquet de Debian nadius'omet la supressió del directori %ss'omet la supressió del fitxer %ss'omet la supressió del fitxer %s, empreu --include-removal per forçar-hos'omet la supressió de l'enllaç simbòlic %ss'omet l'entrada de substitució duplicada per %s en la línia %ds'omet l'entrada duplicada de substitució de font per %s en la línia %ds'esta ignorant el dia de la setmana no vàlid «%s»s'omet l'entrada de substitució per %s amb prioritat %s no vàlidael nom de paquet «%s» és il·legal: %sinclou fitxers binaris a l'arxiu tarinclou fitxers suprimits al pedaçinclou la marca horària al pedaçs'esta incloent el codi font complet a la pujadael valor en l'opció %s de la variable %s no és correcte: %sinfono es pot instal·lar la nova llista de fitxersno es pot instal·lar el nou fitxer de substitució de variables «%s»el nom del mes abreviat «%s» no es vàlids'ha generat una dependència no vàlida: %snom de fitxer %s no vàlidsenyalador invàlid a %s: %slínia no vàlida en la cadena de sumes de verificació %s: %sentrada de substitució no vàlida en la línia %d (%d camps)l'entrada de substitució de font no és valida en la línia %d (%d camps) la versió del font %s no és vàlidasintaxis no vàlida per a l'opció %s, línia %ddeixa les fonts originals empaquetades al directori actualestrofa de llicencia del fitxer de copyrightcom -sa, -sk, -sp, -su o -sr però pot sobreescriurela línia %d de %s no és valida, s'ha ignoratla línia %d de %s menciona un senyalador desconegut %sla línia després de --- no es l'esperada en el diff «%s» (línia %d)línia amb format desconegut (no és camp-s'han trobat canvis locals, els fitxers modificats són:els canvis locals s'han enregistrar en un nou pedaç: %sels identificadors de clau OpenPGP llargs estan descoratjats; empreu empremtes de clau a %s o %sno pot ser una cadena buidala signatura %s no concorda amb el fitxer orig.tar complementari %s en el paquet fontla signatura %s no concorda amb el fitxer orig.tar %s en el paquet fontmanca el camp Priority pel paquet binari %s; s'emprarà '-'manca el camp Priority pels fitxers fontmanca el camp Section pel paquet binari %s; s'emprarà '-'manca el camp Section pels fitxers fontmanca el fitxer orig.tar complementari per a la signatura %s en el paquet fontmanca el nom de fitxer del registre de canvismanca el camp de control font imprescindible %smanca l'ordre del lligam %smanca informació per al camp d'eixida imprescindible %smanca informació per al camp d'eixida %smanca el fitxer orig.tar o debian.tar en el paquet font v2.0es pot emprar mkdir per a crear un directorimés informació de canvi o finals'ha mogut «%s» a «%s»múltiples arxius tar en el paquet font v1.0heu d'especificar el paquet ja que la informació de control en conté molts (%s)ha de començar amb un caràcter alfanumèricconducte amb nomsòcol amb nomla versió del paquet nadiu no pot tenir una revisiópaquet nadiu amb .orig.tares requereix una opció d'accióes necessita almenys un directories necessita almenys un executablees necessita exactament un nom de fitxer, una secció i una prioritatnecessita almenys tres argumentshan aparegut noves biblioteques en el fitxer «symbols»: %sel fitxer buit acabat de crear «%s» no es representarà en el diffsegüent encapçalament o fi de fitxerno s'ha trobat el camp Package a «%s», s'ometrà el paquetel fitxer de control de %s no conté el camp Packageno s'ha especificat cap paquet binari a %sno s'ha emprat cap fitxer debian/symbols com a base per a generar %sno s'ha trobar la informació de dependències per %s (utilitzat per %s)
+Consell: comproveu si la biblioteca prové realment d'un paquet.no s'ha indicat cap fitxer a la línia d'ordresno s'ha trobat cap paràgraf de paquet a la informació de controlno s'ha donat cap nom de pedaç; no es pot continuarno s'ha especificat el format del font a %s, vegeu dpkg-source(1)el directori «%s» no existeix, proveu amb l'opció --create-dir (-c)no s'ha trobat l'entrada, s'ignorarà el paràmetre «%s» = «%s»no hi ha cap arxiu tar al camp Filesno s'ha trobat l'arxiu tar de desenvolupament original a %sla versió del paquet no nadiu no conté una revisióno s'ha trobat cap, es començarà per l'entrada mes antigacap dels noms de fitxer a ---/+++ són vàlids en el diff «%s» (línia %d)no existentno s'està incloent el codi font original a la pujadano es signarà la construcció UNRELEASED; empreu --force-sign per a forçar-honotificacióla variable de substitució ${%s} és obsoletas'esperen d'un a tres argumentsnomés admet compressió gzipl'opció %s només te sentit juntament amb l'opció %sl'argument orig %s no és un fitxer normal o un directoril'argument orig és buit (equivalent a no orig i no diff) però l'estil de maneig de font -s%s en requereix algunl'argument orig està empaquetat però l'estil de maneig de font -s%s el requereix desempaquetat (.orig/)l'argument orig està desempaquetat però l'estil de maneig de font -s%s el requereix empaquetat (.orig.tar.<ext>)el directori «%s» ja existeix, no es sobreescriurà, s'està abandonant; empreu -sA, -sK o -sP per a forçar-hoel fitxer original i el modificat són /dev/null al diff «%s» (línia %d)no s'ha trobat el fitxer de substitució %sel paquet %s (nom de fitxer %s) conté un camp Filename!el paquet %s (nom de fitxer %s) és duplicat però amb versió més nova; s'està emprant i s'ha ignorat la informació de %s!el paquet %s (nom de fitxer %s) és duplicat; s'ha ignorat i s'està emprant informació de %s!el paquet %s té la prioritat %s en el fitxer de control però %s en la llista de fitxersel paquet %s té la secció %s en el fitxer de control però %s en la llista de fitxersel paquet %s és al fitxer de control però no a la llista de fitxersel paquet %s és a la llista de fitxers però no a la informació de controlel paquet %s no és a la informació de controlpaquet %s: el paquet podria evitar una dependència innecessària si %s no estigues vinculat a %s (no empra cap símbol de la biblioteca)el paquet podria evitar una dependència innecessària si %s no estiguessin vinculats a %s (no empren cap símbol de la biblioteca)secció del paquet del fitxer d'informació de controlfitxer de control tests del paquetel nom de l'orig empaquetat «%s» existeix però no es un fitxer normalanalitza un fitxer de canvisversió analitzada del registre de canvisel fitxer pedaç «%s» no existeixels pedaços no estan aplicats, s'estan aplicant arael patró «%s» no coincideix amb cap fitxerconducte per a %sfitxer normalregistra els pedaços generats, en comptes d'avortarno es pot esborrar la còpia de seguretat del pedaç %storna a obrir stdintorna a obrir stdoutrepetició de clau-valor %sfitxer de dipòsit %ss'ha d'eliminar «%s» que es proveït per l'arxiu tar originals'estan restablint les còpies de seguretat dels fitxers de quilt per %sla revisió no pot ser buidarm -rf no ha pogut eliminar «%s»vegeu la sortida «diff» més avalls'esta preparant un clon sense profunditats'han trobat diversos fitxers orig.tar (%s i %s) però només se'n permet unafitxer d'informació «%.255s» de la biblioteca dinàmica, línia %d dolenta: «%s»els identificador de clau OpenPGP curts estan trencats; empreu empremtes de clau a %s o %sno s'admet l'opció curta a %s, línia %dno s'ha trobat l'ordre-per-signar «%s»el fitxer de signatura ja és armat en OpenPGP ASCII, s'esta copiants'està ometent «%s»han desaparegut algunes biblioteques del fitxer «symbols»: %shan aparegut alguns símbols nous en el fitxer «symbols»: %shan desaparegut alguns símbols o patrons en el fitxer «symbols»: %sfont canviat perel directori font «%s» no és <paquet-font>-<versió-original> «%s»el directori font no és el directori superior d'un dipòsit bzr (%s/.bzr no és present), però s'ha especificat el Format bzrel directori font no és el directori superior d'un dipòsit git (%s/.git no és present), però s'ha especificat el Format gitdistribució del fontno es permet l'estil de maneig de font -s%s amb -bno es permet l'estil de maneig de font -s%s amb -x<cap>paquet fontno s'admet el format del paquet font «%s»: %sel paquet font té dos valors contradictoris - %s i %sel nom del paquet font «%s» no és legal: %sel paquet font només empra sumes de comprovació dèbilsversió del fontpujada de només font (s'inclou el codi font original)pujada de només font: paquet nadiu de Debianpujada de només font, només diff (NO s'inclou el codi font original)el mode especial %04o de «%s» no es representarà en el diffel tipus de sistema GNU %s especificat no correspon amb el tipus de sistema del CC %s, proveu a especificar una variable d'entorn CC correctaespecifica una <ref> git per incloure al «git bundle»principi de la informació del canvila variable de substitució ${%s} no s'utilitza, però s'ha definitla variable de substitució ${%s} s'utilitza, però no s'ha definitno s'ha trobat el símbol %s utilitzat per %s en cap bibliotecala informació de símbol ha d'estar precedida per una capçalera (fitxer %s, línia %s)no s'ha especificat el nom del símbol: %senllaç simbòlic a %serror de sintaxi a %s en la línia %d: %sno accepta cap argument que no siguen opcionsl'arxiu tar «%s» ja existeix, no es sobreescriurà, s'està abandonant; empreu -sU or -sR per a forçar-hofitxer de control test %s no és un fitxer regularla versió actual (%s) és inferior a l'anterior (%s)el diff modifica els següents fitxers de desenvolupament originals: %sel fitxer «symbols» generat està buitla capçalera no coincideix amb la regex esperadael pedaç conté marques difuses no permeses, o està mal formatel fitxer de sèrie (%s) conté opcions no admeses («%s», línia %s); dpkg-source pot fallar en aplicar pedaçosel final no coincideix amb la regex esperadano hi ha canvis locals per inscriureno hi ha un diff, només es fa l'arxiu tar principalmassa substitucions (recursives?) a «%s»s'ha intentat fusionar el mateix objecte (%s) dues vegades en un symfileconfia que el codi font empaquetat i desempaquetat és el mateixs'ha especificat dos ordres: --%s i --%sno es poden establir els permisos d'execució en «%s»s'ha produït un error en canviar al directori «%s»no es pot comprovar l'existència de «%s»no es pot comprovar l'existència del directori orig «%s»no es pot comprovar la eliminació del directori «%s»no es pot determinar %sno es pot executar %sno es pot mantenir el directori orig (ja existeix)no es pot obrir el fitxer d'informació «%s» de la biblioteca dinàmicano es pot canviar el nom de %s a %sno es pot canviar el nom de %s (acabat de crear) a %sno es pot canviar el nom de «%s» a «%s»no es pot fer «stat» al directori orig desempaquetat putatiu «%s»desfà l'aplicació dels pedaços si ja estan aplicats (predeterminat)s'està desaplicant %shi ha canvis sense publicar no ignorats en el directori de treball: %ssubstitució de mantenidor incondicional per a %ss'ha trobat un fi inesperat del diff «%s»signatura OpenPGP sense finalitzarla substitució %% és desconeguda en el lligam: %%%scaracterística %s desconeguda a la variable %s: %sel tipus de sistema de CC %s és desconegut, s'emprarà el predeterminat (construcció nadiua)la arquitectura de Debian %s és desconeguda, també heu d'especificar el tipus de sistema GNUel tipus de sistema GNU %s és desconegut, també heu d'especificar la arquitectura de Debiantipus de construcció «%s» desconegutel tipus de sistema GNU predeterminat per a la arquitectura de Debian %s és desconegutel format del fitxer executable «%s» és desconeguttipus de fitxer desconegutel nom del lligam %s és desconegutarquitectura de l'amfitrió '%s' desconegudacamp d'informació «%s» desconegut en les dades d'entrada a %sclau-valor %s desconegudalínia desconeguda de diff -u a %s: «%s»l'opció «%s» és desconegudal'opció o argument %s és desconegudaformat de sortida «%s» desconegutsortida desconeguda de «dpkg --search»: '%s'desempaqueta també l'arbre de fonts originalsla destinació del desempaquetat existeix: %sel nom de l'orig desempaquetat «%s» existeix però no és un directoris'està desempaquetant %scamp de dependència «%s» no reconegutno es reconeix el fitxer pel paquet font %s: %sfitxer no reconegut per un paquet font nadiu: %slínia no reconegudahi ha canvis no representables al fontsuma de verificació «%s» no admesaversió no admesa de les metadades quilt: %sfitxer binari no desitjat: %sfitxers font originals modificats: %sla versió original no pot ser buidaempra un sol pedaç de debianitzacióempra l'entrada més nova que és anterior a l'especificadaempra l'entrada més antiga que és posterior a l'especificadaempra el codi font original empaquetat (desempaqueta i preserva)empra el codi font original empaquetat (desempaqueta i suprimeix)empreu el format «3.0 (quilt)» per a tenir el canvis al fitxers originals de desenvolupament separats i documentats, vegeu dpkg-source(1)empra el codi font original desempaquetat (empaqueta i preserva)empra el codi font original desempaquetat (empaqueta i suprimeix)s'està emprant una ordre-assolir-superusuari mentre s'és superusuaris'estan emprant opcions de %s: %ss'esta emprant la llista de pedaços de %ss'està emprant el format de font «%s»el proveïdor %s no existeix a %sfitxer de proveïdorla versió «%s» no és vàlida: %sel número de versió no pot ser buitel número de versió conté un caràcter il·legal ‘%s‘el número de versió no comença amb un digitespera de %savísno es pot escriure la informació de desviació a stderrs'ha produït un error d'escriptura en les dades de controlno es pot escriure en l'entrada de tarpodeu integrar els canvis locals amb %snomés es pot especificar «from» o «since», s'emprarà «since»només es pot especificar «to» o «until», s'emprarà «until»no es pot combinar «count» o «offset» amb altres opcions d'intervalno es pot emprar una etiqueta symver per capturar símbols sense versió: %s
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/de.gmo dpkg-1.20.7.1/scripts/po/de.gmo
--- dpkg-1.20.7.1-orig/scripts/po/de.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/de.gmo	2021-06-09 18:25:13.787501646 -0500
@@ -0,0 +1,805 @@
+��jl;�&�3*�3|�5Q6p6�6��6{77<�7 �7J8@\8�8,�8;�8"9;9BZ98�92�9 	:2*:4]:�:�: �:�:�:;;,;!C;(e;"�;#�;�;�;<l,<�<+�<(�<#=J'=0r=%�=%�=�=�=->7>>/v>/�>9�>&?;7?6s?�?�?*�?;@%C@!i@1�@$�@S�@,6A(cA4�A)�AF�AI2BH|B�B�B�BJ�B�GGG�J�-L��N�P'�PB�P(.QWQ�vQ@HS<�S��S�^T"U 1U9RVa�X��Z�g��jIsq��qA�t1�w�y��}�?�3"�-V�>��5ÈA��k;����,��eҍ{8���ю�l��bl�!ϓA�"3��V�)>�#h�(��)��TߖV4�)��2��+�3�/H�gx���,�8�V�Eb�#��̙��!�;�(Y�(����Ț!�2�-:�Lh�5��F�>2�q�����S��S�,f�'����"ȝ�2�9�P�b�\��)ݞ��'.�V�5n�����<ڟ�6�F�U_���ʠ��M"�p�����M�����4'�)\�'����0Ȣ��	�!�@�O�h�(|�����%ͣ���84�m�~�!����ؤ�)�*�>�F[�F��:�$�4�"S�v�������
˦
+٦�1��2)�!\�~�����Χ*�,�,<�*i�+����$רU��+R�Y~�1ة�
+����[�.{�2��0ݫ#�12�(d�5��mì51�
+g�	r�(|�*��-Э,��1+�0]�3��-®,� � >�_�o�(��0�����0�6M���<��ǰ>۰5�/P�%��$��˱'߱� �@� [�|�)��Ų� ���-�rH�%��(� 
+�=+�Bi�*��״;��80�i� ��
��+���"�)$�0N�"�#��#ƶ&��)1�<[� ��$��޷<��7�W�Bi�-��!ڸ��?�Y�3y�:���3�;�#Y�"}���$��/���5�#S�$w�����'ǻ-�4�R�(l�1�� Ǽ.�-�&E�7l�0��/ս3�^9���?��9�1*�!\�0~� ��9п
+�(%�N�0f�'��:��%�� �<�*O�(z�5��)��
+��.�J�h�~���-����.�=0�n�0��&��"��6�m<�"��'��#��4�4N�1������6��*&�AQ���,��:���$�3�S�+r�1��^��R/�[��_��@>��,��]��L%�?r�>��0��7"�Z�y����&j���/������!
�/�*M�%x�2��#����
+�-�:�V�
c�q���6��#�����-�C�@\�1��Q��'!�I�6e�
��2��1��<�L�C^�q��q���.��.�����/�5M�'��'����0��)�<=�9z�l��0!�R�2g�4��3��B�F�
b�!p���S��)�%.�ZT�>��2��#!�+E�8q�o��,�$G�&l�.��6��3��%-�#S�w�%��4��-���/�.D�)s���-����*�/.�
^�9l�(������%�%.�GT�E��E��(�:>�&y�������2���%.�T�h���'������0�1�">�-a�1����!����-�=�*V�6��7�� �� �72�5j�,��.��j��,g�.��5��*��$�>�W�p���������.��(#�0L�}���������+��=�;I�A��9����l���������������|�R*�%}�Z��\��[�+o�4��!����V�7g�M��*��>�TW�����%����1�7� C� d�&��.��(��(�%-�S�!q�����-4�4b�/��U��;�&Y�.������9��A�6M�7��I��+�B2�Du�4����0�C?�-����0��%��l%�7��'��F��49�Mn�R��T�d�v������jn����baP�
+.�
+I�
+0A;rm�OFl���X#6&ZS�9��
#�#�'Z/[/qo2i�5�K7�9=#�D4I/7I=gIA�IA�I�)J;�MB�N1O��O&<PcPyP��P�[S$)V@NV&�V��Va�W$Y)9Y9cYe�YbZ6fZG�Z0�ZJ[=a[�[\2:\Jm\�\J�\,](B],k]!�] �])�]6^/<^l^(�^*�^3�^._UC_F�_I�_G*`r`)�`�`r�`oEa5�a3�ab.+bZb5yb�b�b3�br
c;�c�c!�c/�c%dKAd.�d,�dQ�d/;e ke)�en�e$%f)Jf-tf+�fa�f)0g!Zg#|gj�g*h.6hMeh<�h7�h2(iG[i)�i%�i?�i3j*Rj$}j/�j*�j)�j;'kck!�k-�kK�kl.:l1il7�l'�l3�lD/m-tm8�mP�mP,nM}n �n.�n#o ?o`o
{o!�o�o�o�oA�oC$p%hp�p�p�p&�p;qJ@qF�q:�q>
rLr:dr_�r3�r`3s4�s��s�Zt$Xu3}u1�u<�u! v5Bv+xv:�v��v:cw�w�w,�w5�w:x=Tx-�x=�xC�x5By;xy�y�y�y�y%z57zmz�z2�z4�z{I{b{B{{8�{<�{04|/e|�|,�|#�|/},1}4^}/�}7�}/�}%+~,Q~~~!�~��~$O0t.�C�d�+}�"��D̀I�$[�)����/���&�/3�6c�*��0ł(��4�$T�-y�C��'�*�*>�Di�%��Ԅ\�;B�-~�$��]х'/�@W�F��+߆A� M�(n�(��"��/�6�J�"V�&y�(��+Ɉ���2-�4`�:��Љ*�=�&U�5|�3��0�?�:W�:��@͋y�"��C��5�=%�%c�:��"č>�&�#D�h�5��*��;�;�%Z���)��&ȏ?�0/�
`�n�-���"ɐ'�4�?I�#��9��F�$.�=S�+��"��C���$�,��,�<�:K�C��Eʔ�8.�0g�5��EΕ�0&�JW���%��Ж(�;�AU�t��r�~����N� Ι*�n�]��B�E*�1p�C���
+�"�#2�V�Bq���#Н*��"�4B�?w�@��$���*�0=�'n���������G��9<�v�0��#Š-�H�R`�l��, �#M�?q���<ˢ;�DD���K�����s���5�/B�r�
+z�3��8��+�-�L�2Y�+��B��F��xB�J���5"�8X�@��ZҨ-�L�"[�$~�p��-�0B�ns�?�N"�"q�A��:֫��?��2ج0�0<�Xm�Fƭ%
�33�,g�1��HƮI�Y�"w�E��L�$-�=R�,��L��?
+�J�Na�B��"� �(7�0`�R��L�M1��=��*ӳ���"0�=S���+��۴"���04�'e���<���'��+�,I�v�,��%��3ݶ�6/�Vf�U��0�.D�Bs�B��A��B;��~�?�@W�N��8�$ � E�!f�"����8ƻ ��# �2D�-w�=��
��5��0/�`�6z�R��P�XU�Z���8B���B��[�?��y(e�AA.cX�U���^_$�J�h�A(�����}�g2\
+rlZ�a����km$����4{�����P��^��4,���peb�GL�1'�%��0:���:1fzN���F��$W��w�#R�v
+C��?�o��O )��#��G�t���3�>������������hi�;a�(�%&�,�<Rn�C�!a��DS��295�sy'{���b3�E�	YrNm�_L�J�d��VH�#N�478�.Fu*��=[�x;Gd���.7P*�_g�|QKnW���VI�/DY�"�h�
��v�6�`9e�I�Q�+z�WH�l�q�++'��Ec�&j��5�@�@���Q��@x��������L�*��S���\���T�)i%���f9���O?|��ZP,[�`T�!>Y6fw�� b=T��M�
������"����
�^25��O�3�����Z:=d�X��/�\�o)0��]�/<1j��H�
+K�~Xk-�I�VJ�SU�����g���pMcF<]�s`uUj�q;�0-�7��	��!MC} B	E&���t~�����8���KR�D���i�-]����"��>�6
+Options:
+  -a, --no-architecture    no architecture part in filename.
+  -o, --overwrite          overwrite if file exists.
+  -k, --symlink            don't create a new file, but a symlink.
+  -s, --subdir [dir]       move file into subdirectory (use with care).
+  -c, --create-dir         create target directory if not there (use with care).
+  -?, --help               show this help message.
+  -v, --version            show the version.
+
+file.deb changes to <package>_<version>_<architecture>.<package_type>
+according to the 'underscores convention'.
+
+This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+  %s (package says %s, not %s)  new version is %s  old version is %s$ORIGIN is used in RPATH of %s and the corresponding directory could not be identified due to lack of DEBIAN sub-directory in the root of package's build tree%d similar warning has been skipped (use -v to see it)%d other similar warnings have been skipped (use -v to see them all)%s and %s fields are required to compute the source basename%s contains an insecure path: %s%s contains an unresolvable reference to symbol %s: it's probably a plugin%s didn't complete in %d second%s didn't complete in %d seconds%s does not exist%s doesn't contain a valid OpenPGP signature%s doesn't contain any information about the source package%s doesn't list any binary package%s doesn't match completely %s%s field contains both global and implementation specific keywords%s field contains value %s, but no tests control file %s%s field keyword "%s" is invalid; use "%s" instead%s field keyword "%s" is unknown%s field keyword "%s" is unknown in dpkg namespace%s field keyword "%s" is uppercase; use "%s" instead%s field of package %s: %s file%s has an unexpected SONAME (%s)%s is a symlink%s is a symlink to outside %s%s is empty%s is not a compression level%s is not a plain file%s is not a supported compression%s is not a supported compression method%s is not a supported print format%s is not a supported variable name%s is not a valid option for %s%s is not a valid version%s is not the name of a file%s must be updated to support the 'build-arch' and 'build-indep' targets (at least '%s' seems to be missing)%s needs a parameter%s package '%s' with udeb specific field %s%s should be a directory or non-existing%s should be a file or non-existing%s should not be linked against %s (it uses none of the library's symbols)%s subprocess failed with unknown status code %d%s subprocess returned exit status %d%s subprocess was killed by signal %d%s(l%s): %s%s(l%s): %s
+LINE: %s'%s' is not a legal architecture in list '%s''%s' is not a legal architecture string in package '%s''%s' is not supported by the source format '%s''%s' option specifies non-existing version '%s''dpkg-deb -I %s control' exited with %d, skipping package'offset' without 'count' has no effect'since' option specifies most recent version '%s', ignoring'until' option specifies oldest version '%s', ignoring(Use -d flag to override.)--%s needs a directory--%s needs at least one argument, the .dsc--%s needs the .dsc file as first argument, not a directory--%s takes no more than two arguments--target-format option is missing-E and -W are deprecated, they are without effect-L is obsolete; it is without effect-b takes at most a directory and an orig source argument (with v1.0 source package)-b takes only one parameter with format '%s'-i%s is deprecated; it is without effect-s%s is deprecated; always using gpg style interface-s%s option overrides earlier -s%s option.orig directory name %s is not <package>-<upstreamversion> (wanted %s).orig.tar name %s is not <package>_<upstreamversion>.orig.tar (wanted %s)<control-file> is the control file to process (default: debian/control).<standard input><standard output>Build conflicts: %sBuild options:
+  -c<control-file>         get control info from this file.
+  -l<changelog-file>       get per-version info from this file.
+  -F<changelog-format>     force changelog format.
+  --format=<source-format> set the format to be used for the source package.
+  -V<name>=<value>         set a substitution variable.
+  -T<substvars-file>       read variables here.
+  -D<field>=<value>        override or add a .dsc field and value.
+  -U<field>                remove a field.
+  -i, --diff-ignore[=<regex>]
+                           filter out files to ignore diffs of
+                             (defaults to: '%s').
+  -I, --tar-ignore[=<pattern>]
+                           filter out files when building tarballs
+                             (defaults to: %s).
+  -Z, --compression=<compression>
+                           select compression to use (defaults to '%s',
+                             supported are: %s).
+  -z, --compression-level=<level>
+                           compression level to use (defaults to '%d',
+                             supported are: '1'-'9', 'best', 'fast')Commands:
+  --get <flag>       output the requested flag to stdout.
+  --origin <flag>    output the origin of the flag to stdout:
+                     value is one of vendor, system, user, env.
+  --status           output a synopsis with all parameters affecting the
+                     program behaviour, the resulting flags and their origin.
+  --query            like --status, but in deb822 format.
+  --query-features <area>
+                     output the status of features for the given area.
+  --list             output a list of the flags supported by the current vendor.
+  --export=(sh|make|cmdline|configure)
+                     output something convenient to import the compilation
+                     flags in a shell script, in make, or in a command line.
+  --dump             output all compilation flags with their values.
+  --help             show this help message.
+  --version          show the version.
+Commands:
+  --is <vendor>           returns true if current vendor is <vendor>.
+  --derives-from <vendor> returns true if current vendor derives from <vendor>.
+  --query <field>         print the content of the vendor-specific field.
+  --help                  show this help message.
+  --version               show the version.Commands:
+  -l, --list                list variables (default).
+  -L, --list-known          list valid architectures (matching some criteria).
+  -e, --equal <arch>        compare with host Debian architecture.
+  -i, --is <arch-wildcard>  match against host Debian architecture.
+  -q, --query <variable>    prints only the value of <variable>.
+  -s, --print-set           print command to set environment variables.
+  -u, --print-unset         print command to unset environment variables.
+  -c, --command <command>   set environment and run the command in it.
+  -?, --help                show this help message.
+      --version             show the version.Commands:
+  -x, --extract <filename>.dsc [<output-dir>]
+                           extract source package.
+  -b, --build <dir>        build source package.
+      --print-format <dir> print the format to be used for the source package.
+      --before-build <dir> run the corresponding source package format hook.
+      --after-build <dir>  run the corresponding source package format hook.
+      --commit [<dir> [<patch-name>]]
+                           store upstream changes in a new patch.Debian %s version %s.
+Dependency fields recognized are:
+  %s
+Dpkg::Compression::Process can only start one subprocess at a timeDpkg::Shlibs::Objdump couldn't parse %s
+Enter the desired patch name: Extract options:
+  --no-copy                don't copy .orig tarballs
+  --no-check               don't check signature and checksums before unpacking
+  --no-overwrite-dir       do not overwrite directory on extraction
+  --require-valid-signature abort if the package doesn't have a valid signature
+  --require-strong-checksums
+                           abort if the package contains no strong checksums
+  --ignore-bad-version     allow bad source package versions.File::FcntlLock not available; using flock which is not NFS-safeFormat '3.0 (custom)' is only used to create source packagesGeneral options:
+  -q                       quiet mode.
+  -?, --help               show this help message.
+      --version            show the version.Note: libraries are not searched in other binary packages that do not have any shlibs or symbols file.
+To help dpkg-shlibdeps find private libraries, you might need to use -l.OpenPGP signature not allowed hereOptions passed to dpkg-architecture:
+  -a, --host-arch <arch>      set the host Debian architecture.
+  -t, --host-type <type>      set the host GNU system type.
+      --target-arch <arch>    set the target Debian architecture.
+      --target-type <type>    set the target GNU system type.Options passed to dpkg-genchanges:
+  -si                         source includes orig, if new upstream (default).
+  -sa                         source includes orig, always.
+  -sd                         source is diff and .dsc only.
+  -v<version>                 changes since version <version>.
+  -m, --release-by=<maint>    maintainer for this release is <maint>.
+  -e, --build-by=<maint>      maintainer for this build is <maint>.
+  -C<descfile>                changes are described in <descfile>.
+      --changes-option=<opt>  pass option <opt> to dpkg-genchanges.Options passed to dpkg-source:
+  -sn                         force Debian native source format.
+  -s[sAkurKUR]                see dpkg-source for explanation.
+  -z, --compression-level=<level>
+                              compression level to use for source.
+  -Z, --compression=<compressor>
+                              compression to use for source (gz|xz|bzip2|lzma).
+  -i, --diff-ignore[=<regex>] ignore diffs of files matching <regex>.
+  -I, --tar-ignore[=<pattern>]
+                              filter out files when building tarballs.
+      --source-option=<opt>   pass option <opt> to dpkg-source.
+Options:
+      --build=<type>[,...]    specify the build <type>: full, source, binary,
+                                any, all (default is 'full').
+  -F, --build=full            normal full build (source and binary; default).
+  -g, --build=source,all      source and arch-indep build.
+  -G, --build=source,any      source and arch-specific build.
+  -b, --build=binary          binary-only, no source files.
+  -B, --build=any             binary-only, only arch-specific files.
+  -A, --build=all             binary-only, only arch-indep files.
+  -S, --build=source          source-only, no binary files.
+  -nc, --no-pre-clean         do not pre clean source tree (implies -b).
+      --pre-clean             pre clean source tree (default).
+      --no-post-clean         do not post clean source tree (default).
+  -tc, --post-clean           post clean source tree.
+      --sanitize-env          sanitize the build environment.
+  -D, --check-builddeps       check build dependencies and conflicts (default).
+  -d, --no-check-builddeps    do not check build dependencies and conflicts.
+      --ignore-builtin-builddeps
+                              do not check builtin build dependencies.
+  -P, --build-profiles=<profiles>
+                              assume comma-separated build <profiles> as active.
+      --rules-requires-root   assume legacy Rules-Requires-Root field value.
+  -R, --rules-file=<rules>    rules file to execute (default is debian/rules).
+  -T, --rules-target=<target> call debian/rules <target>.
+      --as-root               ensure -T calls the target with root rights.
+  -j, --jobs[=<number>|auto]  jobs to run simultaneously (passed to <rules>),
+                                forced mode.
+  -J, --jobs-try[=<number>|auto]
+                              jobs to run simultaneously (passed to <rules>),
+                                opt-in mode (default is auto).
+  -r, --root-command=<command>
+                              command to gain root rights (default is fakeroot).
+      --check-command=<command>
+                              command to check the .changes file (no default).
+      --check-option=<opt>    pass <opt> to check <command>.
+      --hook-<name>=<command> set <command> as the hook <name>, known hooks:
+                                init preclean source build binary buildinfo
+                                changes postclean check sign done
+      --buildinfo-option=<opt>
+                              pass option <opt> to dpkg-genbuildinfo.
+  -p, --sign-command=<command>
+                              command to sign .dsc and/or .changes files
+                                (default is gpg).
+  -k, --sign-key=<keyid>      the key to use for signing.
+  -ap, --sign-pause           add pause before starting signature process.
+  -us, --unsigned-source      unsigned source package.
+  -ui, --unsigned-buildinfo   unsigned .buildinfo file.
+  -uc, --unsigned-changes     unsigned .buildinfo and .changes file.
+      --no-sign               do not sign any file.
+      --force-sign            force signing the resulting files.
+      --admindir=<directory>  change the administrative directory.
+  -?, --help                  show this help message.
+      --version               show the version.Options:
+  --build=<type>[,...]     specify the build <type>: full, source, binary,
+                             any, all (default is 'full').
+  -c<control-file>         get control info from this file.
+  -l<changelog-file>       get per-version info from this file.
+  -f<files-list-file>      get .deb files list from this file.
+  -F<changelog-format>     force changelog format.
+  -O[<buildinfo-file>]     write to stdout (or <buildinfo-file>).
+  -u<upload-files-dir>     directory with files (default is '..').
+  --always-include-kernel  always include Build-Kernel-Version.
+  --always-include-path    always include Build-Path.
+  --admindir=<directory>   change the administrative directory.
+  -?, --help               show this help message.
+      --version            show the version.
+Options:
+  --build=<type>[,...]     specify the build <type>: full, source, binary,
+                             any, all (default is 'full').
+  -g                       source and arch-indep build.
+  -G                       source and arch-specific build.
+  -b                       binary-only, no source files.
+  -B                       binary-only, only arch-specific files.
+  -A                       binary-only, only arch-indep files.
+  -S                       source-only, no binary files.
+  -c<control-file>         get control info from this file.
+  -l<changelog-file>       get per-version info from this file.
+  -f<files-list-file>      get .deb files list from this file.
+  -v<since-version>        include all changes later than version.
+  -C<changes-description>  use change description from this file.
+  -m<maintainer>           override control's maintainer value.
+  -e<maintainer>           override changelog's maintainer value.
+  -u<upload-files-dir>     directory with files (default is '..').
+  -si                      source includes orig, if new upstream (default).
+  -sa                      source includes orig, always.
+  -sd                      source is diff and .dsc only.
+  -q                       quiet - no informational messages on stderr.
+  -F<changelog-format>     force changelog format.
+  -V<name>=<value>         set a substitution variable.
+  -T<substvars-file>       read variables here, not debian/substvars.
+  -D<field>=<value>        override or add a field and value.
+  -U<field>                remove a field.
+  -O[<filename>]           write to stdout (default) or <filename>.
+  -?, --help               show this help message.
+      --version            show the version.
+Options:
+  --vendor <vendor>       assume <vendor> is the current vendor.Options:
+  -A             ignore Build-Depends-Arch and Build-Conflicts-Arch.
+  -B             ignore Build-Depends-Indep and Build-Conflicts-Indep.
+  -I             ignore built-in build dependencies and conflicts.
+  -d build-deps  use given string as build dependencies instead of
+                 retrieving them from control file
+  -c build-conf  use given string for build conflicts instead of
+                 retrieving them from control file
+  -a arch        assume given host architecture
+  -P profiles    assume given build profiles (comma-separated list)
+  --admindir=<directory>
+                 change the administrative directory.
+  -?, --help     show this help message.
+      --version  show the version.Options:
+  -a, --host-arch <arch>    set host Debian architecture.
+  -t, --host-type <type>    set host GNU system type.
+  -A, --target-arch <arch>  set target Debian architecture.
+  -T, --target-type <type>  set target GNU system type.
+  -W, --match-wildcard <arch-wildcard>
+                            restrict architecture list matching <arch-wildcard>.
+  -B, --match-bits <arch-bits>
+                            restrict architecture list matching <arch-bits>.
+  -E, --match-endian <arch-endian>
+                            restrict architecture list matching <arch-endian>.
+      --print-format <format>
+                            use <format> for --print-set and --print-unset,
+                              allowed values: shell (default), make.
+  -f, --force               force flag (override variables set in environment).Options:
+  -l, --file <changelog-file>
+                           get per-version info from this file.
+  -F <changelog-format>    force changelog format.
+  -S, --show-field <field> show the values for <field>.
+  -?, --help               show this help message.
+      --version            show the version.Options:
+  -l<library-dir>          add directory to private shared library search list.
+  -p<varname-prefix>       set <varname-prefix>:* instead of shlibs:*.
+  -O[<file>]               write variable settings to stdout (or <file>).
+  -L<local-shlibs-file>    shlibs override file, not debian/shlibs.local.
+  -T<substvars-file>       update variables here, not debian/substvars.
+  -t<type>                 set package type (default is deb).
+  -x<package>              exclude package from the generated dependencies.
+  -S<package-build-dir>    search needed libraries in the given
+                             package build directory first.
+  -I<package-build-dir>    ignore needed libraries, shlibs and symbols files
+                             in the given build directory.
+  -v                       enable verbose mode (can be used multiple times).
+  --ignore-missing-info    don't fail if dependency information can't be found.
+  --warnings=<value>       define set of active warnings (see manual page).
+  --admindir=<directory>   change the administrative directory.
+  -?, --help               show this help message.
+      --version            show the version.Options:
+  -l<library-path>         add directory to private shared library search list.
+  -p<package>              generate symbols file for package.
+  -P<package-build-dir>    temporary build directory instead of debian/tmp.
+  -e<library>              explicitly list libraries to scan.
+  -v<version>              version of the packages (defaults to
+                           version extracted from debian/changelog).
+  -c<level>                compare generated symbols file with the reference
+                           template in the debian directory and fail if
+                           difference is too important; level goes from 0 for
+                           no check, to 4 for all checks (default level is 1).
+  -q                       keep quiet and never emit any warnings or
+                           generate a diff between generated symbols
+                           file and the reference template.
+  -I<file>                 force usage of <file> as reference symbols
+                           file instead of the default file.
+  -O[<file>]               write to stdout (or <file>), not .../DEBIAN/symbols.
+  -t                       write in template mode (tags are not
+                           processed and included in output).
+  -V                       verbose output; write deprecated symbols and pattern
+                           matching symbols as comments (in template mode only).
+  -a<arch>                 assume <arch> as host architecture when processing
+                           symbol files.
+  -d                       display debug information during work.
+  -?, --help               show this help message.
+      --version            show the version.
+Options:
+  -p<package>              print control file for package.
+  -c<control-file>         get control info from this file.
+  -l<changelog-file>       get per-version info from this file.
+  -F<changelog-format>     force changelog format.
+  -v<force-version>        set version of binary package.
+  -f<files-list-file>      write files here instead of debian/files.
+  -P<package-build-dir>    temporary build directory instead of debian/tmp.
+  -n<filename>             assume the package filename will be <filename>.
+  -O[<file>]               write to stdout (or <file>), not .../DEBIAN/control.
+  -is, -ip, -isp, -ips     deprecated, ignored for compatibility.
+  -D<field>=<value>        override or add a field and value.
+  -U<field>                remove a field.
+  -V<name>=<value>         set a substitution variable.
+  -T<substvars-file>       read variables here, not debian/substvars.
+  -?, --help               show this help message.
+      --version            show the version.
+Packages in archive but missing from override file:Packages in override file but not in archive:Packages in override file with incorrect old maintainer value:Packages specifying same maintainer as override file:Packages with multiple instances but no --multiversion specified:Parser options:
+      --format <output-format>
+                           set output format (defaults to 'dpkg').
+      --reverse            include all changes in reverse order.
+      --all                include all changes.
+  -s, --since <version>    include all changes later than <version>.
+  -v <version>             ditto.
+  -u, --until <version>    include all changes earlier than <version>.
+  -f, --from <version>     include all changes equal or later than <version>.
+  -t, --to <version>       include all changes up to or equal than <version>.
+  -c, --count <number>     include <number> entries from the top (or tail
+                             if <number> is lower than 0).
+  -n <number>              ditto.
+  -o, --offset <number>    change starting point for --count, counted from
+                             the top (or tail if <number> is lower than 0).
+Positional options (order is significant):
+  <executable>             include dependencies for <executable>,
+  -e<executable>           (use -e if <executable> starts with '-')
+  -d<dependency-field>     next executable(s) set shlibs:<dependency-field>.Press <enter> to start the signing process.
+Source format specific build and extract options are available;
+use --format with --help to see them.This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Unmet build dependencies: %sUsage: %s [<command>]Usage: %s [<option>...]Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Packages
+
+Options:
+  -t, --type <type>        scan for <type> packages (default is 'deb').
+  -a, --arch <arch>        architecture to scan for.
+  -h, --hash <hash-list>   only generate hashes for the specified list.
+  -m, --multiversion       allow multiple versions of a single package.
+  -e, --extra-override <file>
+                           use extra override file.
+  -M, --medium <medium>    add X-Medium field for dselect multicd access method
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Sources
+
+Options:
+  -n, --no-sort            don't sort by package before outputting.
+  -e, --extra-override <file>
+                           use extra override file.
+  -s, --source-override <file>
+                           use file for additional source overrides, default
+                           is regular override file with .src appended.
+      --debug              turn debugging on.
+  -?, --help               show this help message.
+      --version            show the version.
+
+See the man page for the full documentation.
+Usage: %s [<option>...] <command>Usage: %s [<option>...] <executable>|-e<executable> [<option>...]Usage: %s [<option>...] <file>...
+Usage: %s [<option>...] <filename> <section> <priority>
+
+Options:
+  -f<files-list-file>      write files here instead of debian/files.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <old> <new-a> <new-b> [<out>]
+
+Options:
+  -m, --merge-prereleases  merge pre-releases together, ignores everything
+                           after the last '~' in the version.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] [<command>]Usage: %s [<option>...] [<control-file>]Use --help for program usage information.Version number suggests Ubuntu changes, but Maintainer: does not have Ubuntu addressVersion number suggests Ubuntu changes, but there is no XSBC-Original-Maintainer fieldWrote %s entries to output Packages file.abort if generated diff has upstream files changesaborting due to --abort-on-upstream-changesaborting due to unexpected upstream changes, see %saccept quilt metadata <version> even if unknownadd %s in debian/source/include-binaries if you want to store the modified binary in the debian tarballadding %s to %sadministrative directory '%s' does not existan union dependency can only contain simple dependenciesapplying %sarchitecture %s only allowed on its own (list for package %s is '%s')assuming architecture '%s' for '%s'assuming section '%s' for '%s'auto select original sourcebad binary-only value: %sbad changelog format namebad key-value after ';': '%s'bad line in substvars file %s at line %dbad package control information for '%s'badly formatted heading linebadly formatted trailer linebadly formatted urgency value: %sbadly formed file name in files list file, line %dbadly formed line in files list file, line %dbinaries to analyze should already be installed in their package's directorybinary and diff upload (original source NOT included)binary build with no binary artifacts found; .buildinfo is meaninglessbinary build with no binary artifacts found; cannot distributebinary control file %sbinary file contents changedbinary path %s not foundbinary-only arch-indep upload (source code and arch-specific packages not included)binary-only arch-specific upload (source code and arch-indep packages not included)binary-only upload (no source code included)binary-only upload (no source included)block deviceblock lacks either %s or %s fieldsblock lacks the '%s' fieldbuild dependencies/conflicts unsatisfied; abortingbuild information filebuilding %s in %sbuilding %s using existing %sbuilding a source package without cleaning up as you asked; it might contain undesired filesbuilding source for a binary-only releasebundling: %sbzr status exited nonzerocan't build with source format '%s': %scan't create symlink %scan't extract name and version from library name '%s'can't parse dependency %scan't read directory %s: %scannot OpenPGP ASCII armor signature file due to missing gpgcannot change timestamp for %scannot close %scannot combine %s and %scannot continue due to the error abovecannot continue due to the errors listed abovecannot copy %s to %scannot create directory %scannot create directory '%s'cannot create signature file %scannot determine CC system type, falling back to default (native compilation)cannot execute %s programcannot find '%s'cannot find an editorcannot find library %s needed by %s (ELF format: '%s' abi: '%s'; RPATH: '%s')cannot fork for %scannot fstat file %scannot import key in %s since GnuPG is not installedcannot install output buildinfo file '%s'cannot install output control file '%s'cannot make %s executablecannot merge symbols from objects without SONAMEcannot mkdir %scannot move %s to %scannot move '%s' to existing filecannot open %scannot open directory %scannot open file %scannot open file %s for binary detectioncannot opendir %scannot parse %s fieldcannot parse non-conformant date '%s'cannot read %scannot read link %scannot read timestamp from %scannot register changes in %s, this patch already existscannot remove %scannot represent change to %s:cannot represent change to %s: %scannot seek into file %scannot stat %scannot stat directory %scannot stat directory %s (before removal)cannot stat file %scannot stat orig argument %scannot unpack bzr-format source package because bzr is not in the PATHcannot unpack git-format source package because git is not in the PATHcannot verify signature on %s since GnuPG is not installedcannot write %scannot write signature file %schangelog format %s is unknown: %scharacter '%s' not allowedcharacter devicechdir to %scheck-command '%s' not foundchild processcloning %sclose on tar inputconflicting checksums '%s' and '%s' for file '%s'conflicting file sizes '%u' and '%u' for file '%s'continued value line not in fieldcontrol info of a .deb packagecontrol informationcopy of the debian directorycouldn't close stdoutcouldn't parse control information from %scouldn't parse dynamic relocation record: %scouldn't parse dynamic symbol definition: %screate a shallow clone with <number> depthcreate an empty original tarball if missingcreated directory '%s'creating shallow clone with depth %scurrent host architecture '%s' does not appear in package '%s' architecture list (%s)debian/rules is not executable; fixing thatdefault GNU system type %s for Debian arch %s does not match specified GNU system type %sdefine the format of the generated source packagedeprecated use of LD_LIBRARY_PATH with private library directory which interferes with cross-building, please use -l option insteaddetected %d unwanted binary file (add it in debian/source/include-binaries to allow its inclusion).detected %d unwanted binary files (add them in debian/source/include-binaries to allow their inclusion).device or socket is not alloweddiff %s modifies file %s through a symlink: %sdiff %s patches file with C-style encoded filenamediff %s removes a non-existing file %s (line %d)diff '%s' doesn't contain any patchdiff '%s' finishes in middle of ---/+++ (line %d)diff '%s' patches file %s more than oncediff '%s' patches file with name ending in .dpkg-origdiff '%s' patches files multiple times; split the diff in multiple files or merge the hunks into a single onediff '%s' patches something which is not a plain filediff on %sdirectorydirectory argument %s is not a directorydisallowed target in %s field keyword "%s"diversions involved - output may be incorrectdo not apply debian diff to upstream sourcesdo not apply patches at the end of the extractiondo not copy original source to current directorydo not extract debian tarball into upstream sourcesdo not prepare build tree by applying patchesdo not unapply patches if previously applieddoesn't contain a bzr repositorydoesn't contain a git repositorydpkg-genchangesduplicate field %s foundduplicate files in %s source package: %sduplicate files list entry for file %s (line %d)entry in dpkg's status fileentry in repository's %s fileepoch part of the version number cannot be emptyepoch part of the version number is not a number: '%s'errorexecutable mode %04o of '%s' will not be represented in diffexpected %s, got %sexpected OpenPGP signature, found end of file after blank lineexpected OpenPGP signature, found something else '%s'expected [ +-] at start of line %d of diff '%s'expected ^--- in line %d of diff '%s'expected ^@@ at line %d of diff '%s'extracting %s in %sextracting unsigned source package (%s)failed to copy %s to %sfailed to get a write lock on %sfailed to import key in %sfailed to parse a line in %s: %sfailed to parse line in %s: %sfailed to rename newly-extracted %s to %sfailed to rename saved %s to %sfailed to sign %s filefailed to verify signature on %sfailed to writefailed when writing stdoutfakeroot not found, either install the fakeroot
+package, specify a command with the -r option, or run this as rootfatal error occurred while parsing %sfield %s contains duplicate keyword "%s"field cannot start with a hyphenfile %s has checksum %s instead of expected %s (algorithm %s)file %s has no final newline (either original or modified version)file %s has size %u instead of expected %ufile arguments need to existfile removal without proper filename in diff '%s' (line %d)filename, section and priority may contain no whitespacefiles stanza of copyright filefirst block lacks a Source fieldfirst headingformat v3.0 (bzr) uses only one source fileformat v3.0 (git) expected %sformat v3.0 (git) unknown file: %sformat v3.0 (git) uses only one .git fileformat v3.0 (git) uses only one .gitshallow filefound blank line where expected %sfound change data where expected %sfound end of file where expected %sfound start of entry where expected %sfound trailer where expected %sfull upload (original source is included)full upload; Debian-native package (full source is included)gain-root-command '%s' not foundgeneral section of control info filegit ls-files exited nonzerogit repository %s uses submodules; this is not yet supportedheader stanza of copyright filehost architectureif patch '%s' is correctly applied by quilt, use '%s' to update itignoring -sd option for native Debian packageignoring deletion of directory %signoring deletion of file %signoring deletion of file %s, use --include-removal to overrideignoring deletion of symlink %signoring duplicate override entry for %s at line %dignoring duplicate source override entry for %s at line %dignoring invalid week day '%s'ignoring override entry for %s, invalid priority %sillegal package name '%s': %sinclude binary files in the tarballinclude removed files in the patchinclude timestamp in the patchincluding full source code in uploadincorrect value in %s option of %s variable: %sinfoinstall new files list fileinstall new varlist file '%s'invalid abbreviated month name '%s'invalid dependency got generated: %sinvalid filename %sinvalid flag in %s: %sinvalid line in %s checksums string: %sinvalid override entry at line %d (%d fields)invalid source override entry at line %d (%d fields)invalid source version %sinvalid syntax for option in %s, line %dleave original source packed in current directorylicense stanza of copyright filelike -sa, -sk, -sp, -su, -sr but may overwriteline %d of %s is invalid, it has been ignoredline %d of %s mentions unknown flag %sline after --- isn't as expected in diff '%s' (line %d)line with unknown format (not field-colon-value)local changes detected, the modified files are:local changes have been recorded in a new patch: %slong OpenPGP key IDs are strongly discouraged; please use key fingerprints in %s or %s insteadmay not be empty stringmismatched addon orig.tar %s for signature %s in source packagemismatched orig.tar %s for signature %s in source packagemissing Priority for binary package %s; using '-'missing Priority for source filesmissing Section for binary package %s; using '-'missing Section for source filesmissing addon orig.tar for signature %s in source packagemissing changelog filenamemissing critical source control field %smissing hook %s commandmissing information for critical output field %smissing information for output field %smissing orig.tar or debian.tar file in v2.0 source packagemkdir can be used to create directorymore change data or trailermoved '%s' to '%s'multiple tarfiles in native source packagemultiple tarfiles in v1.0 source packagemust specify package since control info has many (%s)must start with an alphanumeric characternamed pipenamed socketnative package version may not have a revisionnative package with .orig.tarneed an action optionneed at least a filenameneed at least one executableneed exactly a filename, section and priorityneeds at least three argumentsnew libraries appeared in the symbols file: %snewly created empty file '%s' will not be represented in diffnext heading or end of fileno Package field found in '%s', skipping packageno Package field in control file of %sno binary packages specified in %sno debian/symbols file used as basis for generating %sno dependency information found for %s (used by %s)
+Hint: check if the library actually comes from a package.no files indicated on command lineno package stanza found in control infono patch name given; cannot proceedno source format specified in %s, see dpkg-source(1)no such directory '%s', try --create-dir (-c) optionno such entry found, ignoring '%s' parameter '%s'no tarfile in Files fieldno upstream tarball found at %snon-native package version does not contain a revisionnone found, starting from the oldest entrynone of the filenames in ---/+++ are valid in diff '%s' (line %d)nonexistentnot including original source code in uploadnot signing UNRELEASED build; use --force-sign to overridenoticeobsolete substitution variable ${%s}one to three arguments expectedonly supports gzip compressionoption %s is only meaningful with option %sorig argument %s is not a plain file or directoryorig argument is empty (means no orig, no diff) but source handling style -s%s wants somethingorig argument is packed but source handling style -s%s calls for unpacked (.orig/)orig argument is unpacked but source handling style -s%s calls for packed (.orig.tar.<ext>)orig directory '%s' already exists, not overwriting, giving up; use -sA, -sK or -sP to overrideoriginal and modified files are /dev/null in diff '%s' (line %d)override file %s not foundpackage %s (filename %s) has Filename field!package %s (filename %s) is repeat but newer version; used that one and ignored data from %s!package %s (filename %s) is repeat; ignored that one and using data from %s!package %s has priority %s in control file but %s in files listpackage %s has section %s in control file but %s in files listpackage %s in control file but not in files listpackage %s listed in files list but not in control infopackage %s not in control infopackage %s: package could avoid a useless dependency if %s was not linked against %s (it uses none of the library's symbols)package could avoid a useless dependency if %s were not linked against %s (they use none of the library's symbols)package's section of control info filepackage's tests control filepacked orig '%s' exists but is not a plain fileparse changes fileparsed version of changelogparsing package '%s' %s field: %spatch file '%s' doesn't existpatches are not applied, applying them nowpathname '%s' cannot be canonicalizedpathname '%s' points outside source root (to '%s')pattern '%s' did not match any filepipe for %splain filerecord generated patches, instead of abortingremove patch backup file %sreopen stdinreopen stdoutrepeated key-value %srepository's %s filerequired removal of '%s' installed by original tarballrestoring quilt backup files for %srevision cannot be emptyrm -rf failed to remove '%s'see diff output belowsetting up shallow cloneseveral orig.tar files found (%s and %s) but only one is allowedshared libs info file '%s' line %d: bad line '%s'short OpenPGP key IDs are broken; please use key fingerprints in %s or %s insteadshort option not allowed in %s, line %dsign-command '%s' not foundsignature file is already OpenPGP ASCII armor, copyingskipping '%s'some libraries disappeared in the symbols file: %ssome new symbols appeared in the symbols file: %ssome symbols or patterns disappeared in the symbols file: %ssource changed bysource directory '%s' is not <sourcepackage>-<upstreamversion> '%s'source directory is not the top directory of a bzr repository (%s/.bzr not present), but Format bzr was specifiedsource directory is not the top directory of a git repository (%s/.git not present), but Format git was specifiedsource distributionsource handling style -s%s not allowed with -bsource handling style -s%s not allowed with -xsource options<none>source packagesource package format '%s' is not supported: %ssource package has two conflicting values - %s and %ssource package name '%s' is illegal: %ssource package uses only weak checksumssource versionsource-only upload (original source is included)source-only upload: Debian-native packagesource-only, diff-only upload (original source NOT included)special mode %04o of '%s' will not be represented in diffspecified GNU system type %s does not match CC system type %s, try setting a correct CC environment variablespecify a git <ref> to include in the git bundlestart of change datasubstitution variable ${%s} unused, but is definedsubstitution variable ${%s} used, but is not definedsymbol %s used by %s found in none of the librariessymbol information must be preceded by a header (file %s, line %s)symbol name unspecified: %ssymlink to %ssyntax error in %s at line %d: %stakes no non-option argumentstarfile '%s' already exists, not overwriting, giving up; use -sU or -sR to overridetest control %s is missing %s or %s fieldtest control %s is not a regular filethe %s field contains an arch-specific dependency but the package '%s' is architecture allthe current version (%s) is earlier than the previous one (%s)the diff modifies the following upstream files: %sthe generated symbols file is emptythe header doesn't match the expected regexthe patch has fuzz which is not allowed, or is malformedthe series file (%s) contains unsupported options ('%s', line %s); dpkg-source might fail when applying patchesthe trailer doesn't match the expected regexthere are no local changes to recordthere is no diff, do main tarfile onlytoo many substitutions - recursive ? - in '%s'tried to merge the same object (%s) twice in a symfiletrust packed and unpacked original sources are sametwo commands specified: --%s and --%sunable to change permission of '%s'unable to chdir to '%s'unable to check for existence of '%s'unable to check for existence of orig directory '%s'unable to check for removal of directory '%s'unable to determine %sunable to execute %sunable to keep orig directory (already exists)unable to open shared libs info file '%s'unable to rename %s to %sunable to rename '%s' (newly created) to '%s'unable to rename '%s' to '%s'unable to stat putative unpacked orig '%s'unapply patches if previously applied (default)unapplying %suncommitted, not-ignored changes in working directory: %sunconditional maintainer override for %sunexpected end of diff '%s'unfinished OpenPGP signatureunknown %% substitution in hook: %%%sunknown %s feature in %s variable: %sunknown CC system type %s, falling back to default (native compilation)unknown Debian architecture %s, you must specify GNU system type, toounknown GNU system type %s, you must specify Debian architecture, toounknown build type %sunknown default GNU system type for Debian architecture %sunknown executable format in file '%s'unknown file typeunknown hook name %sunknown host architecture '%s'unknown information field '%s' in input data in %sunknown key-value %sunknown line from diff -u on %s: '%s'unknown option '%s'unknown option or argument %sunknown output format %sunknown output from dpkg --search: '%s'unpack original source tree toounpack target exists: %sunpacked orig '%s' exists but is not a directoryunpacking %sunrecognized dependency field '%s'unrecognized file for a %s source package: %sunrecognized file for a native source package: %sunrecognized lineunrepresentable changes to sourceunsupported checksum '%s'unsupported version of the quilt metadata: %sunwanted binary file: %supstream files that have been modified: %supstream signing key but no upstream tarball signatureupstream tarball signatures but no upstream signing keyupstream version cannot be emptyuse a single debianization patchuse newest entry that is earlier than the one specifieduse oldest entry that is later than the one specifieduse packed original source (unpack and keep)use packed original source (unpack and remove)use the '3.0 (quilt)' format to have separate and documented changes to upstream files, see dpkg-source(1)use unpacked original source (pack and keep)use unpacked original source (pack and remove)uses full '%s' instead of abbreviated month name '%s'using a gain-root-command while being rootusing options from %s: %susing patch list from %susing source format '%s'vendor %s doesn't exist in %svendor fileverifying %s using existing %sversion '%s' is invalid: %sversion number cannot be emptyversion number contains illegal character '%s'version number does not start with digitvirtual dependency contains invalid relation: %swait for %swarningwrite diversion info to stderrwrite error on control datawrite on tar inputyou can integrate the local changes with %syou can only specify one of 'from' and 'since', using 'since'you can only specify one of 'to' and 'until', using 'until'you can't combine 'count' or 'offset' with any other range optionyou can't use symver tag to catch unversioned symbols: %sProject-Id-Version: dpkg-dev 1.20.6
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2020-12-24 05:43+0100
+Last-Translator: Helge Kreutzmann <debian@helgefjell.de>
+Language-Team: German <debian-l10n-german@lists.debian.org>
+Language: de
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+
+Optionen:
+  -a, --no-architecture    kein Architekturteil im Dateinamen
+  -o, --overwrite          überschreiben, falls Datei existiert
+  -k, --symlink            keine neue Datei erstellen, sondern einen Symlink
+  -s, --subdir [Verz]      Datei in Unterverzeichnis verschieben (Vorsicht!)
+  -c, --create-dir         Zielverzeichnis erstellen, falls nicht
+                           vorhanden (Vorsicht!)
+  -?, --help               diese Hilfemeldung anzeigen
+  -v, --version            die Version anzeigen
+
+Datei.deb ändert sich in <Paket>_<Version>_<Architektur>.<Pakettyp>
+gemäß der »Unterstrich-Konvention«.
+
+Dies ist freie Software. Lesen Sie die GNU General Public License Version 2
+oder neuer für die Kopierbedingungen. Es gibt KEINE Haftung.
+  %s (laut Paket %s, nicht %s)  neue Version ist %s  alte Version ist %s$ORIGIN wird in RPATH von %s verwendet und das zugehörige Verzeichnis konnte nicht identifiziert werden, da das DEBIAN-Unterverzeichnis in der Wurzel des Paketbaubaums fehlt.%d andere, ähnliche Warnung wurde übersprungen (verwenden Sie -v, um sie zu sehen)%d andere, ähnliche Warnungen wurden übersprungen (verwenden Sie -v, um alle zu sehen)Die Felder %s und %s werden benötigt, um den »basename« der Quelle zu ermitteln%s enthält einen unsicheren Pfad: %s%s enthält eine nicht auflösbare Referenz auf Symbol %s: wahrscheinlich eine Erweiterung%s war nicht innerhalb von %d Sekunde beendet%s war nicht innerhalb von %d Sekunden beendet%s existiert nicht.%s enthält keine gültige OpenPGP-Signatur%s enthält keine Informationen über das Quellpaket%s listet kein binäres Paket auf%s passt nicht komplett zu %sFeld %s enthält sowohl globale als auch implementierungsspezifische Schlüsselwörter%s-Feld enthält Wert %s, aber keine Teststeuerdatei %s%s-Feld-Schlüsselwort »%s« ist ungültig; verwenden Sie stattdessen »%s«%s-Feldschlüsselwort »%s« ist unbekannt%s-Feld-Schlüsselwort »%s« ist im Dpkg-Namensraum unbekannt%s-Feld-Schlüsselwort »%s« ist großgeschrieben; verwenden Sie stattdessen »%s«Feld %s von Paket %s: %s-Datei%s hat einen unerwarteten SONAME (%s)%s ist ein Symlink%s ist ein Symlink zum außerhalb befindlichen %s%s ist leer%s ist keine Komprimierungsstufe%s ist keine gewöhnliche Datei.%s ist keine unterstützte Kompression%s ist keine unterstützte Kompressionsmethode%s ist keine unterstütztes Print-Format%s ist kein unterstützter Variablenname%s ist keine gültige Option für %s.%s ist keine gültige Version%s ist nicht der Name einer Datei%s muss aktualisiert werden, um die Ziele »build-arch« und »build-indep« zu unterstützen (zumindest »%s« scheint zu fehlen).%s benötigt einen Parameter%s Paket »%s« mit udeb-spezifischem Feld %s%s sollte ein Verzeichnis sein oder nicht existieren%s sollte eine Datei sein oder nicht existieren%s sollte nicht gegen %s gelinkt werden (es verwendet keines der Bibliotheks-Symbole)Unterprozess %s fehlgeschlagen mit unbekanntem Exit-Code %dUnterprozess %s lieferte Exitstatus %dUnterprozess %s wurde durch Signal %d getötet%s(l%s): %s%s(l%s): %s
+ZEILE: %s»%s« ist keine gültige Architektur in der Liste »%s«»%s« ist keine gültige Architekturzeichenkette in Paket »%s«»%s« wird vom Quellformat »%s« nicht unterstützt.Option »%s« gibt nicht existierende Version »%s« an»dpkg-deb -I %s control« wurde mit %d beendet, Paket wird übersprungen»offset« ohne »count« hat keinen EffektOption »since« gibt die neuste Version »%s« an, wird ignoriertOption »until« gibt die älteste Version »%s« an, wird ignoriert(Verwenden Sie -d, um sich darüber hinwegzusetzen.)--%s benötigt ein Verzeichnis--%s benötigt mindestens ein Argument, die .dsc--%s benötigt die .dsc-Datei als erstes Argument, kein Verzeichnis--%s akzeptiert nicht mehr als zwei ArgumenteOption --target-format fehlt-E und -W sind veraltet, sie haben keine Wirkung-L ist veraltet; es hat keine Wirkunghöchstens ein Verzeichnis und eine Originalquelle wird bei -b als Argument akzeptiert (mit v1.0-Quellpaket)-b akzeptiert nur einen Parameter mit dem Format »%s«-i%s ist veraltet; es hat keine Wirkung-s%s ist veraltet; es wird immer die GPG-artige Schnittstelle verwandtOption -s%s überschreibt vorhergehende Option -s%s..orig-Verzeichnisname %s ist nicht <Paket>-<Ursprungsversion> (%s erwünscht).orig.tar-Name %s lautet nicht <Paket>_<Ursprungsversion>.orig.tar (%s erwünscht)<Steuerdatei> ist die zu verarbeitende Steuerdatei (standardmäßig debian/control).<Standardeingabe><Standardausgabe>Baukonflikte: %sBauoptionen:
+  -c<Steuerdatei>          Steuerinformationen aus dieser Datei beziehen
+  -l<Changelog-Datei>      pro-Version-Informationen aus dieser Datei
+                           beziehen
+  -F<Changelog-Format>     Changelog-Format erzwingen
+  --format=<Quellformat>   setzt das für das Quellpaket zu verwendende Format
+  -V<Name>=<Wert>          eine Subtitutionsvariable setzen
+  -T<Substvars-Datei>      Variablen hier lesen
+  -D<Feld>=<Wert>          ein .dsc-Feld und Wert überschreiben oder ergänzen
+  -U<Feld>                 ein Feld entfernen
+  -i, --diff-ignore[=<Regaus>]
+                           Dateien herausfiltern, deren Diffs ignoriert werden
+                             (Vorgabe: »%s«)
+  -I, --tar-ignore[=<Muster>]
+                           Dateien beim Bauen des Tarballs herausfiltern
+                             (Vorgabe: %s)
+  -Z, --compression=<Komprimierung>
+                           zu verwendene Kompression auswählen (Vorgabe:
+                             »%s«, unterstützt werden: %s)
+  -z, --compression-level=<Stufe>
+                           zu verwendende Kompressionsstufe wählen (Vorgabe:
+                             »%d«, unterstützt werden: »1«-»9«, »best«, »fast«)Befehle:
+  --get <Schalter>    den angegebenen Schalter nach Stdout ausgeben
+  --origin <Schalter> die Quelle des Schalters nach Stdout ausgeben,
+                      mögliche Werte: vendor, system, user, env
+ --status             eine Zusammenfassung aller Parameter ausgeben, die das
+                      Verhalten des Programms, die daraus entstehenden
+                      Schalter und ihre Quelle angeben
+  --query             wie --status, aber in deb822-Format.
+  --query-features <Bereich>
+                      den Status der Funktionalitäten für den übergebenen
+                      Bereich ausgeben
+  --list              eine Liste der vom aktuellen Lieferanten (Vendor)
+                      unterstützen Schalter ausgeben
+  --export=(sh|make|configure)
+                      etwas praktisches ausgeben, um die Kompilierschalter
+                      in einem Shell-Skript, in Make oder auf der
+                      Befehlszeile zu importieren
+  --dump              alle Kompilierschalter mit ihren Werten ausgeben
+  --help              diese Hilfemeldung anzeigen
+  --version           die Version anzeigen
+Befehle:
+  --is <Lieferant>     wahr liefern, falls der aktuelle Lieferant <Lieferant> ist
+  --derives-from <Lieferant>
+                       wahr liefern, falls der aktuelle Lieferant vom <Lieferant> abgeleitet ist
+  --query <Feld>       gibt den Inhalt des Lieferanten-spezifischen Feldes aus
+  --help               diese Hilfenachricht anzeigen
+  --version            die Version anzeigenBefehle:
+  -l, --list         Variablen auflisten (voreingestellt)
+  -L, --list-known   gültige Architekturen auflisten (passend auf bestimmte Kriterien)
+  -e, --equal <Arch> mit Host-Debian-Architektur vergleichen
+  -i, --is <Arch-Platzhalter>
+                     prüfen, ob Host die Debian-Architektur <Arch-Platzhalter> ist
+  -q, --query <Variable>
+                     nur den Wert von <Variable> ausgeben
+  -s, --print-set    den Befehl zum Setzen von Umgebungsvariablen ausgeben
+  -u, --print-unset  den Befehl zum Löschen von Umgebungsvariablen ausgeben
+  -c, --command <Befehl>
+                     Umgebung setzen und darin den Befehl ausführen
+  -?, --help         diese Hilfemeldung anzeigen
+      --version      die Version anzeigenBefehle:
+  -x, --extract <Dateiname>.dsc [<Ausgabe-Verz>]
+                      Quellpaket extrahieren.
+  -b, --build <Verz>  Quellpaket bauen.
+      --print-format <Verz> 
+                      das für das Quellpaket zu verwendene Format ausgeben.
+      --before-build <Verz> 
+                      den Hook des entsprechenden Quellpaketformats ausführen.
+      --after-build <Verz> 
+                      den Hook des entsprechenden Quellpaketformats ausführen.
+  --commit [<Verz> [<Patch-Name>]]
+                      Änderungen der Originalautoren in einem neuen
+                      Patch speichern.Debian %s Version %s
+Unterstützte Abhängigkeitsfelder sind:
+  %s
+Dpkg::Compression::Process kann nur einen Unterprozess auf einmal startenDpkg::Shlibs::Objdump konnte %s nicht auswerten
+Bitte geben Sie den gewünschten Namen für den Patch ein: Extrahierungsoptionen:
+  --no-copy                .orig-Tarbälle nicht kopieren
+  --no-check               vor dem Entpacken Signaturen und Prüfsummen
+                           nicht überprüfen
+  --no-overwrite-dir       Verzeichnis beim Entpacken nicht überschreiben
+  --require-valid-signature
+                           abbrechen, falls das Paket keine gültige
+                           Signatur hat
+  --require-strong-checksums
+                           abbrechen, falls das Paket keine starkenSignaturen
+                           enthält
+  --ignore-bad-version     fehlerhafte Quellpaketversionen erlaubenFile::FcntlLock nicht verfügbar: verwende flock, der für NFS nicht sicher istFormat »3.0 (custom)« wird nur zum Anlegen von Quellpaketen verwandtAllgemeine Optionen:
+  -q                       stiller Modus
+  -?, --help               diese Hilfemeldung anzeigen
+      --version            die Version anzeigenHinweis: Bibliotheken werden nicht in anderen Binärpaketen, die keine Shlibs-oder Symboldatei haben, gesucht.
+Um dpkg-shlibdeps dabei zu helfen, private Bibliotheken zu finden, könnte es notwendig sein, -l zu verwenden.OpenPGP-Signatur hier nicht erlaubtOptionen, die an dpkg-architecture weitergegeben werden:
+  -a, --host-arch <Arch>   setzt die Host-Debian-Architektur.
+  -t, --host-type <Typ>    setzt den Host-GNU-Systemtyp.
+      --target-arch <Arch> setzt die Ziel-Debian-Architektur.
+      --target-type <Typ>  setzt den Ziel-GNU-Systemtyp.Optionen, die an Dpkg-Genchanges weitergegeben werden:
+  -si                     Quelle enthält Orig. falls neues Upstream, Standard
+  -sa                     Quelle enthält immer Orig
+  -sd                     Quelle ist nur diff und .dsc
+  -v<Version>             Änderungen seit Version <Version>
+  -m, --release-by=<Betr> <Betr> ist Betreuer des Pakets
+  -e, --build-by=<Betr>   <Betr> ist Betreuer für die Veröffentlichung
+  -C<Desc-Datei>          Änderungen sind in <Desc-Datei> beschrieben
+      --changes-option=<Opt>
+                          <Opt> an Dpkg-Genchanges weitergebenOptionen, die an Dpkg-Source weitergegeben werden:
+  -sn                              »Debian native«-Quellformat erzwingen
+  -s[sAkurKUR]                     siehe dpkg-source für Erklärung
+  -z, --compression-level=<Stufe>  Kompressionsstufe für Quelle
+  -Z, --compression=<Komprimierer> Kompression für Quelle (gz|xz|bzip2|lzma)
+  -i, --diff-ignore[=<Regaus>]     Diffs von auf <Regaus> passenden Dateien ignorieren
+  -I, --tar-ignore[=<Muster>]      Dateien beim Tarball-Bauen herausfiltern
+  --source-option=<Opt>            <Opt> an Dpkg-Source weitergeben
+Optionen:
+  --build=<Typ>[,…]   legt den Bau-<Typ> fest: full, source, binary, any,
+                      all (Vorgabe ist »full«)
+  -F, --build=full    normaler kompletter Bau (Quellen und Binärdateien,
+                      Standard)
+  -g, --build=source,all  Quell- und Architektur-unabhängiger Bau
+  -G, --build=source,any  Quell- und Architektur-abhängiger Bau
+  -b, --build=binary      nur binär, keine Quelldateien
+  -B, --build=any         nur binär, nur Architektur-spezifische-Dateien
+  -A, --build=all         nur binär, nur Architektur-indep-Dateien
+  -S, --build=source      nur Quelle, keine Binärdateien
+  -nc, --no-pre-clean Quellbaum vorab nicht säubern (impliziert -b)
+       --pre-clean    Quellbaum vorab säubern (Standard)
+      --no-post-clean Quellbaum nicht abschließend säubern (Standard).
+  -tc, --post-clean   Quellbaum abschließend säubern.
+      --sanitize-env  die Bauumgebung bereinigen.
+  -D, --check-builddeps
+                      Bauabhängigkeiten und -konflikte prüfen (Standard)
+  -d, --no-check-builddeps Bauabhängigkeiten und -konflikte nicht prüfen
+      --ignore-builtin-builddeps
+                      eingebaute Bauabhängigkeiten nicht prüfen
+  -P, --build-profiles=<Profile>
+                      Kommata-getrennte übergebene Bau-<Profile> als aktiv
+                        annehmen
+  --rules-requires-root
+                      alten Feldwert »Rules-Requires-Root« annehmen
+  -R, --rules-file=<rules>
+                      auszuführende rules-Datei (Vorgabe: debian/rules)
+  -T, --rules-target=<Ziel>
+                      debian/rules <Ziel> mit der korrekten Umgebung aufrufen
+       --as-root      sicherstellen, dass -T das Ziel mit root-Rechten aufruft
+  -j, --jobs[=<Nummer>|auto]
+                      Aufträge, die simultan laufen sollen (an <rules>
+                        weitergegeben) (erzwingender Modus)
+  -J, --jobs-try[=<Nummer>|auto]
+                      Aufträge, die simultan laufen sollen (an <rules>                         weitergegeben); Opt-In-Modus (Vorgabe: auto)
+  -r, --root-command=<Befehl>
+                      Befehl, um root-Rechte zu erhalten (standardmäßig
+                        fakeroot)
+  --check-command=<Befehl>
+                      Befehl, um die .changes-Datei zu prüfen (keine Vorgabe)
+  --check-option=<Opt>
+                      <Opt> an check-<Befehl> übergeben
+  --hook-<Name>=<Befehl>
+                      <Befehl> als Hook-<Name> setzen, bekannte Hooks:
+                        init preclean source build binary buildinfo
+                        changes postclean check sign done
+  --buildinfo-option=<Opt>
+                      Option <Opt> an dpkg-genbuildinfo übergeben
+  -p, --sign-command=<Befehl>
+                      Befehl, um .dsc- und/oder .changes-Dateien zu signieren
+                        (standardmäßig gpg)
+  -k, --sign-key=<Schlüssel-ID>
+                      Für die Signierung zu verwendender Schlüssel
+  -ap, --sign-pause   Pause vor Beginn des Signaturprozesses einfügen
+  -us, --unsigned-source
+                      unsigniertes Quellpaket
+  -ui, --unsigned-buildinfo
+                      nicht signierte .buildinfo-Datei
+  -uc, --unsigned-changes
+                      unsignierte .buildinfo- und .changes-Datei
+      --no-sign       keine Datei signieren
+      --force-sign    Erzwingen des Signierens der entstehenden Dateien
+  --admindir=<Verz>   das administrative Verzeichnis ändern
+  -?, --help          diese Hilfemeldung anzeigen
+      --version       die Version anzeigenOptionen:
+  --build=<Typ>[,…]
+                           legt den Bau-<Typ> fest: full, source, binary,
+                           any, all (Vorgabe ist »full«)
+  -c<Steuerdatei>          Steuerinformationen aus dieser Datei beziehen
+  -l<changelog-Datei>      pro-Version-Informationen aus dieser Datei beziehen
+  -f<Dateilist-Datei>      .deb-Dateiliste aus dieser Datei beziehen
+  -F<changelogformat>      Changelog-Format erzwingen
+  -O[<Buildinfo-Datei>]    nach Stdout (oder <buildinfo-file>) schreiben
+  --always-include-kernel  immer die Bau-Kernel-Version aufnehmen
+  --always-include-path    immer den Baupfad aufnehmen
+  --admindir=<Verzeichnis> das administrative Verzeichnis ändern
+  -?, --help               diese Hilfemeldung anzeigen
+      --version            die Version anzeigen
+Optionen:
+  --build=<Typ>[,…]
+                           legt den Bau-<Typ> fest: full, source, binary,
+                           any, all (Vorgabe ist »full«)
+  -g                       Quell- und Architektur-unabhängiger Bau
+  -G                       Quell- und Architektur-spezifischer Bau
+  -b                       rein binär, keine Quelldateien
+  -B                       rein binär, nur Architektur-spezifische Dateien
+  -A                       rein binär, nur Architektur-unabhängige Dateien
+  -S                       nur Quelle, keine Binärdateien
+  -c<Steuerdatei>          Steuerinformationen aus dieser Datei beziehen
+  -l<changelog-Datei>      pro-Version-Informationen aus dieser Datei beziehen
+  -f<Dateilist-Datei>      .deb-Dateiliste aus dieser Datei beziehen
+  -v<seitVersion>          alle Änderungen neuer als Version einfügen
+  -C<Änderungsbeschreibung> Änderungsbeschreibung aus dieser Datei verwenden
+  -m<Betreuer>             den Wert von »maintainer« der Steuerdatei
+                           überschreiben
+  -e<Betreuer>             den Wert von »maintainer« im Changelog
+                           überschreiben
+  -u<uploadDateiVerz>      Verzeichnis mit Dateien (standardmäßig »..«)
+  -si                      Quelle enthält Orig. falls neues Upstream, Standard
+  -sa                      Quelle enthält immer Originalquellen
+  -sd                      Quelle ist nur Diff und .dsc
+  -q                       ruhig - keine Informationsmeldungen auf Stderr
+  -F<changelogformat>      Changelog-Format erzwingen
+  -V<Name>=<Wert>          Ersetzungsvariable setzen
+  -T<Substvar-Datei>       Variablen von hier lesen statt aus debian/substvars
+  -D<Feld>=<Wert>          ein Feld und Wert überschreiben oder ergänzen
+  -U<Feld>                 ein Feld entfernen
+  -O[<Dateiname>]          nach Stdout (Vorgabe) oder in <Dateiname>
+                           schreiben
+  -?, --help               diese Hilfemeldung anzeigen
+      --version            die Version anzeigen
+Optionen:
+  --vendor <Lieferant>    annehmen, dass <Lieferant> der aktuelle Lieferant ist.Optionen:
+  -A            Build-Depends-Arch und Build-Conflicts-Arch ignorieren
+  -B            Build-Depends-Indep and Build-Conflicts-Indep ignorieren
+  -I            eingebaute Bauabhängigkeiten und -konflikte ignorieren
+  -d Bau-Abh    die übergebene Zeichenkette als Bauabhängigkeiten verwenden
+                statt sie aus der Steuerdatei auszulesen
+  -c Baukonfl   die übergebene Zeichenkette als Baukonflikte verwenden statt
+                sie aus der Steuerdatei auszulesen
+  -a arch       die angegebene Host-Architektur unterstellen
+  -P Profile    übergebene Bauprofile annehmen (Kommata-getrennte Liste)
+  --admindir=<Verzeichnis>
+                das administrative Verzeichnis ändern
+  -?, --help    diese Hilfemeldung anzeigen
+      --version die Version anzeigenOptionen:
+  -a, --host-arch <Arch>    Debian-Architektur setzen
+  -t, --host-type <Typ>     Host-GNU-Systemtyp setzen
+  -A, --target-arch <Arch>  Ziel-Debian-Architektur setzen
+  -T, --target-type <Typ>   Ziel-GNU-Systemtyp setzen
+  -W, --match-wildcard <Arch-Platzhalter>
+                            Architekturliste auf zu <Arch-Platzhalter> passende einschränken
+  -B, --match-bits <Arch-Bits>
+                            Architekturliste auf zu <Arch-Bits> passende einschränken
+  -E, --match-endian <Arch-Endian>
+                            Architekturliste auf zu <Arch-Endian> passende einschränken
+      --print-format <Format>
+                            <Format> für --print-set und --print-unset verwenden,
+                              erlaubte Werte: shell (Vorgabe), make.
+  -f, --force               Schalter zum Erzwingen (setzt Umgebungsvariablen außer Kraft)Optionen:
+  -l, --file <Changelog-Datei>
+                           pro-Version-Informationen aus dieser Datei
+                           beziehen
+  -F <Changelog-Format>    Changelog-Format erzwingen
+  -S, --show-field <Feld>  die Werte für <Feld> anzeigen
+  -?, --help               diese Hilfemeldung anzeigen
+      --version            die Version anzeigenOptionen:
+  -l<Bibl-Verz>            Verzeichnis zur privaten Suchliste für gemeinsam
+                             benutzte Bibliotheken hinzufügen
+  -p<Varnamepräfix>        <Varnamepräfix>:* setzen statt shlibs:*
+  -O[<Datei>]              Variableneinstellungen nach Stdout (oder <Datei>) ausgeben
+  -L<lokaleshlibsdatei>    shlibs-Überschreibe-Datei, nicht
+                             debian/shlibs.local
+  -T<substvars-Datei>      Variablen hier aktualisieren, nicht in
+                             debian/substvars
+  -t<Typ>                  Pakettyp setzen (standardmäßig deb)
+  -x<Paket>                Paket von den erstellten Abhängigkeiten
+                             ausschließen
+  -S<PaketBauVerz>         benötigte Bibliotheken zuerst im übergebenen
+                           Paketbauverzeichnis suchen
+  -I<PaketBauVerz>         ignoriert benötigte Bibliotheken, Shlibs und
+                             Symboldateien im übergebenen Bauverzeichnis.
+  -v                       detaillierte Modus aktivieren (kann mehrfach
+                             verwandt werden)
+  --ignore-missing-info    kein Fehlschlag, falls die Abhängigkeitsinformation
+                             nicht gefunden werden kann
+  --warnings=<Wert>        Satz von aktiven Warnungen definieren (siehe
+                             Handbuchseite)
+  --admindir=<Verzeichnis> das administrative Verzeichnis ändern
+  -?, --help               diese Hilfemeldung anzeigen
+      --version            die Version anzeigenOptionen:
+  -l<library-path>         Verzeichnis zur privaten Suchliste für gemeinsam
+                           benutzte Bibliotheken hinzufügen
+  -p<Paket>                Symboldatei für Paket erstellen
+  -P<Paketbauverz>         temporäres Bauverzeichnis (statt debian/tmp)
+  -e<Bibliothek>           explizite Liste von zu durchsuchenden Dateien
+  -v<Version>              Version des Pakets (standardmäßig
+                           aus debian/changelog extrahierte Version)
+  -c<Stufe>                erstellte Symboldatei mit der Referenzvorlage
+                           im debian-Verzeichnis vergleichen und
+                           fehlschlagen, falls die Unterschiede zu wichtig
+                           sind; Stufe reicht von 0 für keine Prüfung bis zu
+                           4 für alle Prüfungen (Standardstufe ist 1)
+ -q                        ruhig verhalten und nie irgendwelche Warnungen
+                           oder ein Diff zwischen der generierten
+                           Symboldatei und der Referenzvorlage ausgeben
+  -I<Datei>                Verwendung von <Datei> als Referenz-Symboldatei
+                           erzwingen statt der standardmäßigen Datei
+  -O<Datei>                nach Stdout (oder <Datei>) schreiben, nicht .../DEBIAN/symbols
+  -t                       im Vorlagenmodus schreiben (Markierungen werden
+                           nicht verarbeitet und in die Ausgabe aufgenommen)
+  -V                       detaillierte Ausgabe; veraltete Symbole und
+                           Muster, die auf Symbole passen, als Kommentare
+                           schreiben (nur im Vorlagen-Modus)
+  -a<Arch>                 <Arch> als Host-Architektur beim Verarbeiten
+                           der Symboldateien annehmen
+  -d                       bei der Arbeit Debug-Informationen anzeigen
+  -?, --help               diese Hilfemeldung anzeigen
+      --version            die Version anzeigen
+Optionen:
+  -p<Paket>               Steuerdatei für Paket ausgeben
+  -c<Steuerdatei>         Steuerinformationen aus dieser Datei holen
+  -l<Changelog-Datei>     pro-Versions-Informationen aus dieser Datei holen
+  -F<Changelog-Format>    Changelog-Format erzwingen
+  -v<erzwinge_Version>    Version des Binärpakets setzen
+  -f<Dateilistedatei>     Dateien hierher schreiben statt in debian/files
+  -P<Paketbauverz>        temporäres Bauverzeichnis statt debian/tmp
+  -n<Dateiname>           annehmen, dass der Paketdateiname <Dateiname> ist
+  -O[<Datei>]             nach Stdout (oder <Datei>) schreiben, nicht .../DEBIAN/control
+  -is, -ip, -isp, -ips    veraltet, wegen Kompatibilität ignoriert
+  -D<Feld>=<Wert>         ein Feld und Wert überschreiben oder ergänzen
+  -U<Feld>                ein Feld entfernen
+  -V<Name>=<Wert>         eine Substitutionsvariable setzen
+  -T<Substvars-Datei>     Variablen von hier lesen statt aus debian/substvars
+  -?, --help              diese Hilfemeldung anzeigen
+      --version           die Version anzeigen
+Pakete im Archiv, die aber in Override-Datei fehlen:Pakete in Override-Datei, aber nicht im Archiv:Pakete in Override-Datei mit ungültigem alten Betreuer-Wert:Pakete, die die gleichen Betreuer wie die Override-Datei angeben:Pakete mit mehreren Instanzen aber kein --multiversion angegeben:Auswerteroptionen:
+      --format <Ausgabeformat>
+                           setzt das Ausgabeformat (Vorgabe: »dpkg«)
+      --reverse            fügt alle Änderungen in umgekehrter Reihenfolge ein
+      --all                fügt alle Änderungen hinzu
+  -s, --since <Version>    fügt alle Änderungen jünger als <Version> hinzu
+  -v <Version>             ebnso
+  -u, --until <Version>    fügt alle Änderungen älter als <Version> hinzu
+  -f, --from <Version>     fügt alle Änderungen identisch zu oder jünger als <Version> hinzu
+  -t, --to <Version>       fügt alle Änderungen bis zu (einschließlich) <Version> hinzu
+  -c, --count <Zahl>       fügt <Zahl> Einträge vom oben (oder von unten, falls <Zahl> kleiner 0 ist) hinzu
+  -n <Zahl>                ebenso
+  -o, --offset <Zahl>      ändert den Startpunkt für --count, gezählt von oben (oder von unten, falls <Zahl> kleiner 0 ist)
+Positionsoptionen (Reihenfolge ist relevant):
+  <Programm>               Abhängigkeiten für <Programm> hinzunehmen,
+  -e<Programm>             (-e verwenden, falls <Programm> mit »-« beginnt)
+  -d<Abhängigkeitsfeld>    nächste(s) Programm(e) setzt/setzen
+                           shlibs:<Abängigkeitsfeld>.Drücken Sie die <Eingabetaste>, um den Signierprozess zu starten
+Quellformat-spezifische Bau- und Entpackoptionen sind verfügbar;
+verwenden Sie »--format« mit »--help«, um sie anzuzeigen.Dies ist freie Software; lesen Sie die GNU General Public License Version 2
+oder neuer für die Kopierbedingungen. Es gibt KEINE Haftung.
+Nicht erfüllte Bauabhängigkeiten: %sAufruf: %s [<Befehl>]Aufruf: %s [<Option> …]Aufruf: %s [<Option> …] <Binärpfad> [<Override-Datei> [<Pfadpräfix>]] > Packages
+
+Optionen:
+  -t, --type <Typ>         nach <Typ>-Paketen suchen (standardmäßig »deb«)
+  -a, --arch <Arch>        Architektur, nach der gesucht werden soll
+  -h, --hash <Hash-Liste>  nur Hashes für die angegebene Liste erzeugen
+  -m, --multiversion       mehrere Versionen eines einzelnen Pakets erlauben
+  -e, --extra-override <Datei>
+                           zusätzliche Override-Datei verwenden
+  -M, --medium <Medium>    Feld X-Medium für Dselects Multicd-Zugriffsmethode
+                           hinzufügen
+  -?, --help               diese Hilfemeldung anzeigen
+      --version            die Version anzeigen
+Aufruf: %s [<Option> …] <Binärpfad> [<Override-Datei> [<Pfadpräfix>]] > Quellen
+
+Optionen:
+  -n, --no-sort            vor Ausgabe nicht nach Paketen sortieren
+  -e, --extra-override <Datei>
+                           zusätzliche Override-Datei verwenden
+  -s, --source-override <Datei>
+                           Datei für zusätzliche Quell-Overrides verwenden,
+                           standardmäßig wird an eine reguläre Override-Datei
+                           ».src« angehängt
+      --debug              Fehlersuche einschalten
+  -?, --help               diese Hilfemeldung anzeigen
+      --version            die Version anzeigen
+
+Die vollständige Dokumentation finden Sie in der Handbuchseite.
+Aufruf: %s [<Option> …] [<Befehl>]Aufruf: %s [<Option> …] <Programm>|-e<Programm> [<Option> …]Aufruf: %s [<Option> …] <Datei> …
+Aufruf: %s [<Option> …] <Dateiname> <Sektion> <Priorität>
+
+Optionen:
+  -f<Dateilistedatei>      Dateien hierrein statt in debian/files schreiben
+  -?, --help               diese Hilfemeldung anzeigen
+      --version            die Version anzeigen
+Aufruf: %s [<Option> …] <alt> <neu-a> <neu-b> [<Ausgabe>]
+
+Optionen:
+  -m, --merge-prereleases  vorab-Veröffentlichungen zusammenführen,
+                           alles nach dem letzten »~« in der Version
+                           ignorieren
+  -?, --help               diese Hilfemeldung anzeigen
+      --version            die Version anzeigen
+Aufruf: %s [<Option> …] [<Befehl>]Aufruf: %s [<Option> …] [<Steuerdatei>]Verwenden Sie --help für ProgrammbenutzungsinformationenVersionsnummer lässt Ubuntu-Änderungen vermuten, aber »Maintainer:« enthält keine Ubuntu-AdresseVersionsnummer lässt Ubuntu-Änderungen vermuten, aber es gibt kein Feld XSBC-Original-Maintainer%s Einträge wurden in Ausgabe-Paketdatei geschrieben.Abbruch, falls erstellter Diff Änderungen der Originalautoren enthältAbbruch aufgrund von --abort-on-upstream-changesAbbruch aufgrund unerwarteter Änderungen in den Originalquellen, siehe %sQuilt-Metadaten <Version> akzeptieren, selbst falls unbekanntfügen Sie %s zu debian/source/include-binaries hinzu, falls Sie das veränderte Programm im Debian-Tarball speichern möchten.%s wird zu %s hinzugefügtadministratives Verzeichnis »%s« existiert nichteine Vereinigungsabhängigkeit kann nur einfache Abhängigkeiten enthalten%s wird angewandtArchitektur %s ist nur alleine erlaubt (Liste für Paket %s lautet »%s«)Architektur »%s« wird für »%s« vermutetSektion »%s« wird für »%s« vermutetautomatisch ursprüngliche Quelle auswählenungültiger reiner Binärwert: %sungültiger Changelog-Formatnameungültiger Schlüsselwert nach »;«: %sungültige Zeile in der substvars-Datei %s in Zeile %dungültige Paketsteuerinformationen für »%s«ungültig formatierte Kopfzeileungültig formatierte Zeile im Nachspannfalsch formatierter Dringlichkeitswert: %sungültiger Dateiname in Dateilistendatei, Zeile %dungültige Zeile in Dateilistendatei, Zeile %dzu analysierende Programme sollten bereits in ihrem Paketverzeichnis installiert seinBinärpakete(e) und Diff hochzuladen (Originalquellen NICHT enthalten)binärer Bau ohne binäre Produkte gefunden; .buildinfo ist bedeutungslosbinärer Bau ohne binäre Produkte gefunden; kann nicht verteilt werdenbinäre Steuerdatei %sInhalt der Binärdatei hat sich geändertProgrammpfad %s nicht gefundenrein binärer Architektur-unabhängiger Upload (Quellcode und architekturunabhängige Pakete sind nicht enthalten)rein binärer Architektur-spezifischer Upload (Quellcode und architekturabhängige Pakete sind nicht enthalten)Binärpaket(e) hochzuladen (kein Quellcode enthalten)Binärpaket(e) hochzuladen (keine Quelle enthalten)Blockgerätim Block fehlen entweder die Felder %s oder %sim Block fehlt das Feld »%s«Bauabhängigkeiten/-konflikte nicht erfüllt; AbbruchBauinformationsdatei%s wird in %s gebaut%s wird unter Benutzung des existierenden %s gebautwie gewünscht wird ein Quellpaket ohne vorhergehende Bereinigung erstellt; es mag unerwünschte Dateien enthaltenQuelle für eine rein-binäre Veröffentlichung wird gebautBündeln: %sbzr mit nicht-Null-Status beendetunmöglich, mit Quellformat »%s« zu bauen: %sSymlink %s kann nicht angelegt werdenName und Version können nicht aus Bibliotheksnamen »%s« entnommen werdenAbhängigkeit %s kann nicht ausgewertet werdenVerzeichnis %s kann nicht gelesen werden: %sOpenPGP-ASCII-Armor-Signaturdatei kann wegen fehlendem GPG nicht geöffnet werdenZeitstempel für %s kann nicht geändert werden%s kann nicht geschlossen werden%s und %s können nicht kombiniert werdenkann wegen des vorangegangenen Fehlers nicht fortfahrenkann wegen der vorangegangenen Fehler nicht fortfahren%s kann nicht nach %s kopiert werdenVerzeichnis %s kann nicht angelegt werdenVerzeichnis »%s« kann nicht angelegt werdenSignaturdatei %s kann nicht angelegt werdenCC-Systemtyp konnte nicht ermittelt werden, zurück auf Standardeinstellung (native Übersetzung)Programm %s kann nicht ausgeführt werden»%s« kann nicht gefunden werdenEs kann kein Editor gefunden werdenBibliothek %s kann nicht gefunden werden, benötigt von %s (ELF-Format: »%s« ABI: »%s«; RPATH: »%s«)fork kann für %s nicht ausgeführt werdenDatei %s kann nicht mit fstat abgefragt werdenSchlüssel kann nicht in %s importiert werden, da GnuPG nicht installiert istAusgabe-Buildinfo-Datei »%s« kann nicht installiert werdenAusgabe-Steurdatei »%s« kann nicht installiert werdenProgramm %s kann nicht ausführbar gemacht werden.Symbole von Objekten ohne SONAME können nicht zusammengeführt werden.Verzeichnis %s kann nicht angelegt werden%s kann nicht in %s verschoben werden»%s« kann nicht auf eine existierende Datei verschoben werden%s kann nicht geöffnet werdenVerzeichnis %s kann nicht geöffnet werdenDatei %s kann nicht geöffnet werdenkann Datei %s nicht zur Binärerkennung öffnenVerzeichnis %s kann nicht geöffnet werdendas Feld %s kann nicht ausgewertet werdennicht konformes Datum kann nicht ausgewertet werden: »%s«%s kann nicht gelesen werdenLink %s kann nicht gelesen werdenZeitstempel für %s kann nicht gelesen werdenÄnderungen in %s können nicht registriert werden, Patch existiert bereits%s kann nicht entfernt werdenÄnderung in %s kann nicht dargestellt werden:Änderung in %s kann nicht dargestellt werden: %sauf die Datei %s kann nicht mit seek zugegriffen werden%s kann nicht mit stat abgefragt werdenVerzeichnis %s kann nicht mit stat abgefragt werdenVerzeichnis %s kann nicht mit stat abgefragt werden (vor Entfernung)Datei %s kann nicht mit stat abgefragt werdenOriginalargument %s kann nicht mit stat abgefragt werdenBzr-formatiertes Quellpaket kann nicht entpackt werden, da Bzr nicht im PATH istGit-formatiertes Quellpaket kann nicht entpackt werden, da Git nicht im PATH istSignatur von %s kann nicht überprüft werden, da GnuPG nicht installiert ist%s kann nicht geschrieben werdenSignaturdatei %s kann nicht geschrieben werdenunbekanntes Changelog-Format %s: %sZeichen »%s« ist nicht erlaubtzeichenorientiertes Gerätchdir nach %sPrüfbefehl »%s« nicht gefundenKindprozess%s wird geklontschließen auf Tar-Eingabewidersprüchliche Prüfsummen »%s« und »%s« für Datei »%s«widersprüchliche Dateigrößen »%u« und »%u« für Datei »%s«fortgeführte Wertzeile nicht im FeldSteuerinfo eines .deb-PaketsSteuerinformationKopie des debian-VerzeichnissesStdout konnte nicht geschlossen werdenSteuerinformationen aus %s konnten nicht ausgewertet werdendynamischer Adressverschiebungseintrag konnte nicht ausgewertet werden: %sDefinition der dynamischen Symbole konnte nicht ausgewertet werden: %seinen seichten (shallow) Klon mit Tiefe <number> erstelleneinen leeren ursprünglichen Tarball erstellen, falls er fehltVerzeichnis %s erstelltein seichter (shallow) Klon mit Tiefe %s wird eingerichtetaktuelle Host-Architektur »%s« erscheint nicht in der Architekturliste des Pakets »%s« (%s)debian/rules ist nicht ausführbar: wird korrigiertStandard GNU-Systemtyp %s für Debian-Architektur %s passt nicht zu angegebenem GNU-Systemtyp %sDefinieren Sie das Format des erstellten Quellpaketsveraltete Verwendung von LD_LIBRARY_PATH mit privaten Bibliotheksverzeichnis stört Cross-Bau, bitte verwenden Sie stattdessen die Option »-l«erkannte %d unerwünschte Binärdatei (fügen Sie sie zu debian/source/include-binaries hinzu, um ihre Aufnahme zu erlauben).erkannte %d unerwünschte Binärdateien (fügen Sie sie zu debian/source/include-binaries hinzu, um ihre Aufnahme zu erlauben).Gerät oder Socket ist nicht erlaubtDiff %s verändert Datei %s über einen Symlink: %sDiff %s patcht Datei C-artig kodiertem DateinamenDiff %s entfernt eine nicht existierende Datei %s (Zeile %d)Diff »%s« enthält keinen PatchDiff »%s« endet in der Mitte von ---/+++ (Zeile %d)Diff »%s« patcht Datei %s mehr als einmalDiff »%s« patcht Datei, deren Namen auf .dpkg-orig endetDiff »%s« patcht Dateien mehrfach; zerlegen Sie das Diff in mehrere Dateien oder fügen Sie die Stücke in ein Einzelnes zusammenDiff »%s« patcht etwas, das keine gewöhnliche Datei istDiff auf %sVerzeichnisVerzeichnis-Argument %s ist kein Verzeichnisnicht erlaubtes Ziel im %s-Feld-Schlüsselwort »%s«Umleitungen beteiligt - Ausgabe könnte nicht korrekt seinDebian-Diff nicht auf die Quelle der Originalautoren anwendenPatches nicht am Ende der Extraktion anwendenursprüngliche Quelle nicht ins aktuelle Verzeichnis kopierenDebian-Tarball nicht in die Quellen der Originalautoren extrahierenBau-Baum nicht durch Anwenden der Patches vorbereitenPatches nicht entfernen, falls sie bereits angewandt wurdenkein bzr-Depot enthaltenkein Git-Depot enthaltendpkg-genchangesdoppeltes Feld %s gefundendoppelte Dateien in Quellpaket %s: %sdoppelter Dateilisteneintrag für Datei %s (Zeile %d)Eintrag in Dpkgs StatusdateiEintrag in Datei %s des DepotsEpoch-Teil der Versionsnummer darf nicht leer seinEpoch-Teil der Versionsnummer ist keine Zahl: »%s«Fehlerausführbarer Modus %04o von »%s« wird im Diff nicht dargestellt werden%s erwartet, %s bekommenOpenPGP-Signatur erwartet, Dateiende nach einer Leerzeile gefundenOpenPGP-Signatur erwartet, etwas anderes gefunden »%s«[ +-] wurde am Anfang der Zeile %d des Diffs »%s« erwartet^--- wurde in Zeile %d des Diffs »%s« erwartet^@@ wurde in Zeile %d des Diffs »%s« erwartet%s wird nach %s extrahiertunsigniertes Quellpaket wird extrahiert (%s)Fehler beim Kopieren von %s nach %sFehler beim Erlangen einer Schreibsperre auf %sFehlschlag beim Import des Schlüssels in %seine Zeile in %s konnte nicht ausgewertet werden: %sZeile in %s konnte nicht ausgewertet werden: %sFehler beim Umbenennen des frisch extrahierten %s in %sFehler beim Umbenennen des gesicherten %s in %sSignieren der %s-Datei fehlgeschlagenFehler beim Überprüfen der Signatur von %sSchreiben fehlgeschlagenFehler beim Schreiben nach StdoutFakeroot nicht gefunden; installieren Sie entweder das Fakeroot-Paket,
+geben Sie einen Befehl mit der Option -r an oder führen Sie dies als root ausFataler Fehler beim Auswerten von %sFeld %s enthält doppeltes Schlüsselwort »%s«Feld kann nicht mit einem Bindestrich beginnenDatei %s hat Prüfsumme %s statt der erwarteten %s (Algorithmus %s)Datei %s enthält keinen abschließenden Zeilenumbruch (entweder Original oder modifizierte Version)Datei %s hat Größe %u statt erwarteten %uDatei-Argument muss vorhanden seinDatei-Entfernung ohne passenden Dateinamen im Diff »%s« (Zeile %d)Dateiname, Sektion und Priorität dürfen keine Leerraumzeichen enthalten»files«-Anteil der Copyright-Dateiim ersten Block fehlt ein Feld »Source«erste ÜberschriftFormat v3.0 (bzr) verwendet nur eine QuelldateiFormat v3.0 (git) erwartete %sFormat v3.0 (git) unbekannte Datei: %sFormat v3.0 (git) verwendet nur eine .git-DateiFormat v3.0 (git) verwendet nur eine .gitshallow-DateiLeerzeile statt des erwarteten %s gefundenÄnderungsdaten statt des erwarteten %s gefundenDateiende gefunden, wo %s erwartet wurdeBeginn eines Eintrags gefunden, wo %s erwartet wurdeNachspann gefunden, aber %s erwartetAlles hochzuladen (Originalquellen enthalten)Alles hochzuladen; Debian-native-Paket (komplette Quelle enthalten)root-werde-Befehl »%s« nicht gefundenallgemeiner Abschnitt der Steuer-Infodateigit ls-files mit nicht-Null-Status beendetGit-Depot %s verwendet Submodule; dies wird noch nicht unterstützt.»header«-Anteil der Copyright-DateiHost-Architekturfalls Patch »%s« von Quilt korrekt angewandt wurde, verwenden Sie »%s« zum AktualisierenOption »-sd« wird bei »Debian native«-Paketen ignoriertLöschen des Verzeichnisses %s wird ignoriertLöschen der Datei %s wird ignoriertLöschen der Datei %s wird ignoriert, verwenden Sie --include-removal zum außer Kraft setzenLöschen des Symlinks %s wird ignoriertdoppelte Override-Einträge für %s in Zeile %d werden ignoriertdoppelte Quell-Override-Einträge für %s in Zeile %d werden ignoriertungültiger Wochentag »%s« wird ignoriertOverride-Eintrag für %s wird ignoriert, ungültige Priorität %sUngültiger Paketname »%s«: %sbinäre Dateien in den Tarball aufnehmenentfernte Dateien in den Patch aufnehmenZeitstempel in den Patch aufnehmenkompletter Quellcode beim Hochladen hinzufügenungültiger Wert in der Option %s der Variablen %s: %sInformationneue Dateilistendatei installierenneue Varlist-Datei »%s« installierenungültig abgekürzter Monatsname »%s«ungültige Abhängigkeit wurde erstellt: %sungültiger Dateiname %sungültiger Schalter in %s: %sungültige Zeile in %s Prüfsummenzeichenkette: %sungültiger Override-Eintrag in Zeile %d (%d Felder)ungültiger Quell-Override-Eintrag in Zeile %d (%d Felder)ungültiges Quellversion %sSyntaxfehler für Option in %s in Zeile %dursprüngliche Quelle im aktuellen Verzeichnis gepackt lassen»license«-Anteil der Copyright-Dateiwie -sa, -sk, -sp, -su, -sr, kann aber überschreibenZeile %d von %s ist ungültig, sie wurde ignoriert.Zeile %d von %s erwähnt unbekannten Schalter %sZeile nach --- ist im Diff »%s« (Zeile %d) nicht wie erwartetZeile mit unbekanntem Format (nicht Feld-Doppelpunkt-Wert)lokale Änderungen erkannt, die veränderten Dateien sind:lokale Änderungen wurden in einem neuen Patch aufgezeichnet: %svon langen OpenPGP-Schlüsselkennungen wird klar abgeraten; bitte verwenden Sie stattdessen Fingerabdrücke in %s oder %sdarf keine leere Zeichenkette seinunpassendes ergänzendes orig.tar %s im Quellpaket für Signatur %sunpassende orig.tar %s im Quellpaket für Signatur %sfehlende Priorität für Binärpaket %s; »-« wird verwendetfehlende Priorität für Quelldateienfehlende Sektion für Binärpaket %s; »-« wird verwendetfehlende Sektion für Quelldateienfehlendes ergänzendes orig.tar im Quellpaket für Signatur %sfehlender Changelog-Dateinamekritisches Quellsteuerfeld %s fehltFehlender Hook-%s-Befehlfehlende Informationen für kritisches Ausgabefeld %sfehlende Informationen für Ausgabefeld %sfehlende orig.tar- oder debian.tar-Datei in v2.0-Quellpaketmkdir kann zum Erstellen von Verzeichnissen verwandt werdenweitere »change«-Daten oder Abspann»%s« nach »%s« verschobenmehrere Tar-Dateien in nativem Quellpaketmehrere Tar-Dateien in v1.0-QuellpaketPaket muss angegeben werden, da Steuer-Info viele (%s) enthältmuss mit einem alphanumerischen Zeichen beginnenbenannte Pipebenannter Socketnative Paketversion darf keine Revision habennatives Paket mit .orig.tareine Aktions-Option wird benötigtmindestens ein Dateiname wird benötigtmindestens ein ausführbares Programm wird benötigtgenau ein Dateiname, Sektion und eine Priorität wird benötigtbenötigt mindestens drei Argumenteneue Bibliotheken sind in der Symboldatei aufgetaucht: %sneu angelegte leere Datei »%s« wird im Diff nicht dargestellt werdennächste Überschrift oder Dateiendekein Feld »Package« in »%s« gefunden, Paket übersprungenKein »Package«-Feld in Steuerdatei von %skeine Binärpakete in %s angegebenkeine debian/symbols-Datei als Basis zur Erzeugung von %s verwendetkeine Abhängigkeitsinformationen für %s (verwendet von %s) gefunden
+Tipp: Prüfen Sie, ob die Bibliothek tatsächlich aus einem Paket stammt.keine Dateien auf der Befehlszeile angegebenkein package-Eintrag in Steuer-Info gefundenKein Patch-Name angegeben; es kann nicht fortgefahren werdenkein Quellformat in %s angegeben, lesen Sie dpkg-source(1)kein Verzeichnis »%s«, versuchen Sie die Option --create-dir (-c)kein solcher Eintrag gefunden, »%s«-Parameter »%s« wird ignoriertkeine Tar-Datei im Feld Filesunter %s wurde kein Tarball der Originalautoren gefundennichtnative Paketversion enthält keine Revisionkeiner gefunden, beim ältesten Eintrag wird begonnenkeine der Dateinamen in ---/+++ ist im Diff »%s« (Zeile %d) gültignicht existierendOriginalquellen beim Hochladen nicht hinzufügenUNRELEASED-Bau nicht signiert; verwenden Sie --force-sign zum ÜbersteuernHinweisveraltete Substitutionsvariable ${%s}ein bis drei Argumente erwartetnur Gzip-Komprimierung wird unterstütztOption %s hat nur zusammen mit der Option %s eine BedeutungOriginalargument %s ist keine gewöhnliche Datei oder VerzeichnisOriginalargument ist leer (bedeutet kein Orig., kein Diff), aber bei Quellenhandhabungsstil -s%s wird etwas verlangtOriginalargument ist gepackt, aber bei Quellenhandhabungsstil -s%s wird ein ungepacktes Argument verlangt (.orig/)Originalargument ist ungepackt, aber bei Quellenhandhabungsstil -s%s wird ein gepacktes Argument verlangt (.orig.tar.<endung>)Originalverzeichnis »%s« existiert bereits, wird nicht überschrieben, Abbruch; verwenden Sie -sA, -sK oder -sP zum Erzwingen.ursprüngliche und geänderte Dateien sind im Diff »%s« /dev/null (Zeile %d)Override-Datei %s nicht gefundenPaket %s (Dateiname %s) hat Feld Filename!Paket %s (Dateiname %s) ist wiederholt, aber neuere Version; dieses wurde verwandt und Daten aus %s ignoriert!Paket %s (Dateiname %s) ist wiederholt; dieses wurde ignoriert, Daten aus %s werden verwandt!Paket %s hat Priorität %s in Steuerdatei, aber %s in DateienlistePaket %s hat Sektion %s in der Steuerdatei, aber %s in der DateilistePaket %s in Steuerdatei, aber nicht in DateilistePaket %s in Dateienliste, aber nicht in der Steuer-Info aufgeführtPaket %s nicht in Steuer-InfoPaket %s: Das Paket könnte eine nutzlose Abhängigkeit vermeiden, falls %s nicht gegen %s gelinkt wäre (es verwendet keines der Symbole der Bibliothek).Das Paket könnte eine nutzlose Abhängigkeit vermeiden, falls %s nicht gegen %s gelinkt wären (sie verwenden keine der Symbole der Bibliothek).Paketabschnitt der Steuer-InfodateiTeststeuerdatei des Paketsgepackte orig. »%s« existiert, ist aber keine gewöhnliche DateiAuswerten der changes-Dateiausgewertete Version des ChangelogsPakets »%s« Feld %s wird ausgewertet: %sPatch-Datei »%s« existiert nichtPatches sind nicht angewandt, dies wird nun erledigtPfadname „%s“ kann nicht in kanonische Form gebracht werdenPfadname »%s« zeigt außerhalb der Quellwurzel (nach „%s“)Muster »%s« passte auf keine DateiPipe für %sgewöhnliche Dateiangewandte Patches aufzeichnen statt abzubrechenPatch-Sicherungskopiedatei %s entfernenStdin erneut öffnenStdout erneut öffnenwiederholter Schlüsselwert %sDatei %s des Depotserforderliche Entfernung von »%s«, installiert durch Original-TarballQuilt-Sicherungskopiedatei für %s wird wiederhergestelltRevision darf nicht leer seinEntfernen von »%s« durch rm -rf fehlgeschlagenlesen Sie die folgende Diff-Ausgabeein seichter (shallow) Klon wird eingerichtetmehrere orig.tar-Dateien gefunden (%s und %s), aber nur eine ist erlaubtInformationsdatei »%s« der Laufzeitbibliothek, Zeile %d: ungültige Zeile »%s«kurze OpenGPG-Schlüsselkennungen sind defekt; bitte verwenden Sie stattdessen Fingerabdrücke in %s oder %skurze Option in %s in Zeile %d nicht erlaubtSignierbefehl »%s« nicht gefundenSignaturdatei ist bereits OpenPGP-ASCII-Armor, sie wird kopiert»%s« wird übersprungeneinige Bibliotheken sind in der Symboldatei verschwunden: %seinige neue Symbole sind in der Symboldatei aufgetaucht: %seinige Symbole oder Muster sind aus der Symboldatei verschwunden: %sQuelle geändert durchQuellverzeichnis »%s« lautet nicht <Quellpaket>-<Ursprungsversion> »%s«Quellverzeichnis ist nicht das oberste Verzeichnis eines bzr-Depots (%s/.bzr ist nicht vorhanden), aber das Format bzr wurde angegebenQuellverzeichnis ist nicht das oberste Verzeichnis eines Git-Depots (%s/.git ist nicht vorhanden), aber das Format git wurde angegebenQuelldistributionBearbeitungsstil -s%s der Quelle mit -b nicht erlaubtQuellbearbeitungsstil -s%s mit -x nicht erlaubt<keine>QuellpaketQuellpaketformat »%s« wird nicht unterstützt: %szwei widersprüchliche Werte für Quellpaket - %s und %sQuellpaketname »%s« ist ungültig: »%s«Quellpaket verwendet nur schwache PrüfsummenQuellversionNur Quelle hochzuladen (Originalquellen enthalten)Nur Quelle hochzuladen: Debian-native-PaketNur Quelle, nur Diff hochzuladen (Originalquellen NICHT enthalten)besonderer Modus %04o von »%s« wird im Diff nicht dargestellt werdenangegebener GNU-Systemtyp %s passt nicht zu CC-Systemtyp %s, versuchen Sie, eine korrekte CC-Umgebungsvariable zu setzengeben Sie ein Git <ref> an, das in das Git-Bündel aufgenommen werden sollBeginn der »change«-DatenSubstitutionsvariable ${%s} unbenutzt, aber definiertunbenutzte Variable ${%s} verwandt, aber nicht definiertSymbol %s, verwendet von %s, in keiner der Bibliotheken gefundenSymbol-Informationen müssen durch eine Kopfzeile eingeleitet werden (Datei %s, Zeile %s).Symbolname nicht angegeben: %sSymlink auf %sSyntaxfehler in %s in Zeile %d: %sakzeptiert kein NichtoptionsargumentTar-Datei »%s« existiert bereits, wird nicht überschrieben, Abbruch; verwenden Sie -sU oder -sR zum ErzwingenTeststeuerdatei %s fehlt das Feld %s oder %s.Teststeuerdatei %s ist keine gewöhnliche Datei.das Feld %s enthält eine architekturspezifische Abhängigkeit, aber das Paket »%s« ist »architecture all«die aktuelle Version (%s) ist älter als die vorhergehende (%s)durch den Diff werden die folgenden Dateien der Originalautoren verändert: %sdie erstellte Symboldatei ist leerdie Kopfzeile passte nicht auf den erwarteten regulären Ausdruckder Patch war unscharf (nicht erlaubt) oder ist fehlerhaftDie Seriendatei (%s) enthält nicht unterstützte Optionen (»%s«, Zeile %s), dpkg-source könnte beim Anwenden der Patche scheitern.der Abspann passte nicht auf den erwarteten regulären AusdruckEs gibt keine aufzuzeichnenden lokalen ÄnderungenEs gibt kein Diff, nur Haupt-Tar-Datei behandelnzu viele - rekursive? - Substitutionen in »%s«Es wurde versucht, das gleiche Objekt (%s) zweimal in einer Sym-Datei zusammenzuführen.vertrauen, dass ent- und gepackte ursprüngliche Quelle identisch sindzwei Befehle angegeben: --%s und --%sBerechtigung von »%s« kann nicht geändert werdenWechsel in Verzeichnis »%s« nicht möglichExistenz von »%s« kann nicht überprüft werdenExistenz des Originalverzeichnisses »%s« kann nicht überprüft werdenes kann nicht auf Entfernung des Verzeichnisses »%s« überprüft werden%s kann nicht bestimmt werden%s konnte nicht ausgeführt werdenOriginalverzeichnis kann nicht beibehalten werden (existiert bereits)Informationsdatei für Laufzeitbibliothek »%s« kann nicht geöffnet werden%s kann nicht in %s umbenannt werden»%s« (neu angelegt) konnte nicht in »%s« umbenannt werden»%s« kann nicht in »%s« umbenannt werdenunmöglich, das vermeintlich ausgepackte Original »%s« mit stat abzufragenPatches entfernen, falls sie bereits angewandt wurden (Vorgabe)Patch %s wird entferntnoch nicht übergebene, nicht ignorierte Änderungen im Arbeitsverzeichnis: %sbedingungslose Übersteuerung (»override«) des Betreuers für %sunerwartetes Ende des Diffs »%s«unvollständige OpenPGP-Signaturunbekannte %% Substitution in Hook: %%%sunbekannte Funktionalität %s in Variable %s: %sunbekannter CC-Systemtyp %s, zurück auf Standardeinstellung (native Übersetzung)unbekannte Debian-Architektur %s, Sie müssen auch den GNU-Systemtyp angebenunbekannter GNU-Systemtyp %s, Sie müssen auch die Debian-Architektur angebenunbekannter Bautyp %sunbekannter Standard-GNU-Systemtyp für Debian-Architektur %sunbekanntes Programmformat in Datei »%s«unbekannter Dateitypunbekannter Hook-Name »%s«unbekannte Host-Architektur »%s«unbekanntes Informationsfeld »%s« in den Eingabedaten in %sunbekannter Schlüsselwert %sunbekannte Zeile von diff -u auf %s: »%s«unbekannte Option »%s«unbekannte Option oder Argument %sunbekanntes Ausgabeformat %sunbekannte Ausgabe von »dpkg --search«: »%s«ursprüngliche Quellbaum entpacken nachEntpackziel existiert: %sentpacktes Orig. »%s« existiert, ist aber kein Verzeichnis%s wird entpacktAbhängigkeitsfeld »%s« nicht erkanntunerkannte Datei für ein %s-Quellpaket: %sunerkannte Datei für natives Quellpaket: %sZeile nicht erkanntnicht darstellbare Änderungen an der Quellenicht unterstützte Prüfsumme »%s«nicht unterstützte Version der Quilt-Metadaten: %sunerwünschte Binärdatei: %sDateien der Originalautoren, die verändert wurden: %sSignaturschlüssel der Originalautoren aber keine Tarball-Signatur der OriginalautorenTarball-Signatur der Originalautoren aber kein Signaturschlüssel der OriginalautorenVersion der Originalautoren darf nicht leer seineinen einzigen Debianisierungs-Patch verwendenneuester Eintrag wird verwendet, der älter als der angegebene istältester Eintrag wird verwendet, der neuer als der angegebene istgepackte ursprüngliche Quelle verwenden (entpacken und behalten)gepackte ursprüngliche Quelle verwenden (entpacken und entfernen)verwenden Sie das Format »3.0 (quilt)«, um separate und dokumentierte Änderungen an den Dateien der Originalautoren zu erhalten, siehe dpkg-source(1)entpackte ursprüngliche Quelle verwenden (packen und behalten)entpackte ursprüngliche Quelle verwenden (packen und entfernen)verwendet den vollständigen »%s« statt des abgekürzten Monatsnamens »%s«Verwendung eines root-werde-Befehls, obwohl bereits rootOptionen aus %s werden verwendet: %sPatchliste aus %s wird verwendetQuellformat »%s« wird verwendetLieferant %s existiert in %s nichtLieferanten-(vendor-)Datei%s wird unter Benutzung des existierenden %s überprüftVersion »%s« ist ungültig: %sVersionsnummer darf nicht leer seinVersionsnummer enthält ungültiges Zeichen »%s«Versionsnummer beginnt nicht mit einer Ziffervirtuelle Abhängigkeit enthält ungültige Beziehung: »%s«warten auf %sWarnungSchreiben der Informationen zu Umleitungen auf StderrSchreibfehler bei Steuerdaten (»control data«)schreiben auf Tar-EingabeSie können die lokalen Änderungen mit %s integrierenSie können nur entweder »from« oder »since« angeben, »since« wird verwendetSie können nur entweder »to« oder »until« angeben, »until« wird verwendetSie können »count« oder »offset« nicht mit einer anderen Bereichsoption kombinierenSie können die Markierung symver nicht zum Abfangen unversionierter Symbole verwenden: %s
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/en@boldquot.header dpkg-1.20.7.1/scripts/po/en@boldquot.header
--- dpkg-1.20.7.1-orig/scripts/po/en@boldquot.header	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/en@boldquot.header	2021-06-09 18:22:47.474275400 -0500
@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/en@quot.header dpkg-1.20.7.1/scripts/po/en@quot.header
--- dpkg-1.20.7.1-orig/scripts/po/en@quot.header	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/en@quot.header	2021-06-09 18:22:47.474275400 -0500
@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# https://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/es.gmo dpkg-1.20.7.1/scripts/po/es.gmo
--- dpkg-1.20.7.1-orig/scripts/po/es.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/es.gmo	2021-06-09 18:25:13.821501699 -0500
@@ -0,0 +1,143 @@
+���<
3\(#|)#�#�#�#��#{�$ %J)%@t%�%,�%;�%"0&S&8r&�&�& �&�&�&'''E'!\'(~'#�'�'�'(l"(�((�(#�(J�(<)H)/])9�)&�)�)!	*1+*S]*,�*4�*)+F=+I�+H�+,(,G:,��-0'+0BS0�0@�0<�0I313}1-�1>�152�T2{R3�3�3b�3!_6A�6"�6��6)�7#�8(9)E9To9V�9):+E:3q:g�:
;,;8J;�;E�;#�;�;<2<(P<(y<�<�<!�<-�<L,=5y=>�=�=>'">J>W>2r>�>�>\�>)2?\?i?'�?�?�?�?�?@U%@{@�@�@�@�@'�@A0.A_A!oA�A�A�A�A�A�A8B@BQB!pB�B�B)�B�B�BFCF\C�C�C�C�C�C
D
+D!D!4DVDuD�D*�D�D$�D+
EY9E��E`F.�F0�F#�F1G56G
+lG	wG(�G-�G �G �GH*H(CH0lH�H�H6�HI<IQI/eI%�I$�I�I'�IJ)4J^J ~J�Jr�J%"K HKBiK�K;�K8L
>LLL"jL)�L0�L"�L#M&/MVM)vM<�M �M$�M#N<?N|NB�N-�N!�N!O3AO:uO3�O�O$P/'PWP\PxP$�P�P'�P-�P4(Q(]Q-�Q&�Q7�Q0R/DR3tR�R1�R!�R0S ES(fS�S0�S'�S:T%;TaT}T(�T5�T)�T
+U$U.1U`U~U�U�U-�U.�U='V"eV6�V"�V'�V4
+W4?WtW�W*�WA�WX,'X:TX�X�X1�X^YR_Y[�Y@Z?OZ>�Z0�Z7�Z7[V[�c[&G\/n\�\�\�\*�\#]:]
+F]Q]m]
z]�]6�]#�]�]^,^@E^1�^'�^�^
�^2
+_1=_<o_�_C�_q`qt`�`.�`.)aXa/ga5�a'�a�a0b)5b<_b9�b�b3�bBcbc
~c!�c�cS�c> d2_d#�d+�d8�doe,�e$�e.�e6f%Cf#if�f%�f�f�f.�f)&g-Pg~g*�g
�g9�gh%+h%QhEwhE�h:i>iPiei2�i�i%�i�ij'$jLj0ej�j"�j-�j1�j&k!8kZk-tk�k*�k7�k5ljTl*�l�lmm)mEm.dm(�m�m�m�m�mn+n=Jn;�nA�n9o�@o��p$qq�q�q��q~�r&sV;sB�s�s(�s3t&?t&ftT�t�t�t"u1u4Pu�u �u�u#�u+�u'%v(Mvvv$�vz�v4w+Nw(zwT�w�wx4x>Px(�x&�x:�x3y~Ny.�y>�y9;zluzl�zXO{�{�{��{��}V�0n�Q�� �Y�Cl�U��D�:K�b��D�7.��f����H�h�A��$Ɉ%�>� S�*t�>��tދjS�D��S�>W�v��
�-(�PV���c��-�)J�!t�;��Sҏ:&�0a�M��V��>7�Vv�C͑]�!o�,��7����%�T2���C��a�4C�x�)��9��-�&�0@�q�&��c��&�&=�d�)��8��?�/$�8T�&��/���'��&%�L�!`�0��=���-�+?�.k�=��Uؙ7.�Mf�m��\"��!��-���?��9�S�c�9}�.�����=�!\�<~�7�����z�2f�O��A�)+�=U�7��ˠ
+ڠ5�=�Y�x���*��@ҡH�3\�'��F����G�$M�>r�F��/��(�,<�*i�M��@�4#�$X��}�-�)9�jc�&Φb��PX���$��.ߧ3�:B�:}�7��A�I2�/|�I��E��7<�5t�F���P
+�<[�/��6ȫV��aV�S��#�20�7c���;��6�,�/H�7x�L��V��3T�/��6��R�dB�=��:�" �DC�8��A��7�8;�t�8��/ȲP��,I�;v���5ϳK�+Q�}���=�� �#�)*�"T�Bw�E��F�*G�Or�4¶M��JE�G��3طC�AP�Q���>�Z/�#�� ��=Ϲ�
������_��\��\Y�V��Z
�4h������;��Iܾ(&�*O�%z�=��2޿�"�11�c���#��L��5
�"C�*f�.��Q��^�0q�/����F��H*�Os���_���;����X�Eu�E���5�AF�4����<��2�WE�B��!��J�^M�,����?��,4�}a�<��G�-d�:��O��~�S��"��1�PE�1��/��#��,�I�f�7}�R��8�$A�Lf���]��C$�7h�/��]��].�G��!��#��+�LF�#��/�� ��,�55�5k�B����.��1&�7X���9��!��9�;�8Z�F��E��� �w��+�"E�h�#~�,��:��1
+�<�I�IO�=����)��A�?]�O��T��i��Ta����Q����"�M���1O:�[)�Y�Gp�Y/q�X��eB��<�y2}�c?t�NC�b�9�`��rf��U�%�P_h6�E�v�?��x[v�m�aS�~�cBMT�F��D�7(���(����rk�X\o�jG+
+;!����yl��i7�png�*�o�����+���`��$�3�	�s�WW�Z}=���K_��H�Aq�� P�m1D.R�5Lw�A�&:gL�d�V���>���lu@��
�@�K|���6RJ/�E#��3&0S�
]UQ�~�n�^'{2<�4���k��ON��5-�*h-d��� V�9>��)0\�8��'��]�#��jF��	�����x{z����,CJ�Z�t$b�
+,|��I;�4H%u��=�8�wI��.�f�^�e"zs�!
+This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+  %s (package says %s, not %s)  new version is %s  old version is %s$ORIGIN is used in RPATH of %s and the corresponding directory could not be identified due to lack of DEBIAN sub-directory in the root of package's build tree%d similar warning has been skipped (use -v to see it)%d other similar warnings have been skipped (use -v to see them all)%s contains an insecure path: %s%s contains an unresolvable reference to symbol %s: it's probably a plugin%s didn't complete in %d second%s didn't complete in %d seconds%s does not exist%s doesn't contain a valid OpenPGP signature%s doesn't contain any information about the source package%s doesn't list any binary package%s doesn't match completely %s%s field contains value %s, but no tests control file %s%s field of package %s: %s file%s has an unexpected SONAME (%s)%s is a symlink%s is a symlink to outside %s%s is empty%s is not a compression level%s is not a plain file%s is not a supported compression%s is not a supported compression method%s is not a supported variable name%s is not a valid option for %s%s is not a valid version%s is not the name of a file%s must be updated to support the 'build-arch' and 'build-indep' targets (at least '%s' seems to be missing)%s needs a parameter%s should be a directory or non-existing%s should be a file or non-existing%s should not be linked against %s (it uses none of the library's symbols)%s(l%s): %s%s(l%s): %s
+LINE: %s'%s' is not supported by the source format '%s''dpkg-deb -I %s control' exited with %d, skipping package'offset' without 'count' has no effect(Use -d flag to override.)--target-format option is missing-E and -W are deprecated, they are without effect-b takes at most a directory and an orig source argument (with v1.0 source package)-b takes only one parameter with format '%s'-s%s is deprecated; always using gpg style interface-s%s option overrides earlier -s%s option.orig directory name %s is not <package>-<upstreamversion> (wanted %s).orig.tar name %s is not <package>_<upstreamversion>.orig.tar (wanted %s)<control-file> is the control file to process (default: debian/control).<standard input><standard output>Commands:
+  --is <vendor>           returns true if current vendor is <vendor>.
+  --derives-from <vendor> returns true if current vendor derives from <vendor>.
+  --query <field>         print the content of the vendor-specific field.
+  --help                  show this help message.
+  --version               show the version.Commands:
+  -l, --list                list variables (default).
+  -L, --list-known          list valid architectures (matching some criteria).
+  -e, --equal <arch>        compare with host Debian architecture.
+  -i, --is <arch-wildcard>  match against host Debian architecture.
+  -q, --query <variable>    prints only the value of <variable>.
+  -s, --print-set           print command to set environment variables.
+  -u, --print-unset         print command to unset environment variables.
+  -c, --command <command>   set environment and run the command in it.
+  -?, --help                show this help message.
+      --version             show the version.Debian %s version %s.
+Dependency fields recognized are:
+  %s
+Dpkg::Compression::Process can only start one subprocess at a timeEnter the desired patch name: File::FcntlLock not available; using flock which is not NFS-safeFormat '3.0 (custom)' is only used to create source packagesOptions:
+  --vendor <vendor>       assume <vendor> is the current vendor.Packages in archive but missing from override file:Packages in override file but not in archive:Packages in override file with incorrect old maintainer value:Packages specifying same maintainer as override file:Positional options (order is significant):
+  <executable>             include dependencies for <executable>,
+  -e<executable>           (use -e if <executable> starts with '-')
+  -d<dependency-field>     next executable(s) set shlibs:<dependency-field>.This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Usage: %s [<command>]Usage: %s [<option>...]Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Sources
+
+Options:
+  -n, --no-sort            don't sort by package before outputting.
+  -e, --extra-override <file>
+                           use extra override file.
+  -s, --source-override <file>
+                           use file for additional source overrides, default
+                           is regular override file with .src appended.
+      --debug              turn debugging on.
+  -?, --help               show this help message.
+      --version            show the version.
+
+See the man page for the full documentation.
+Usage: %s [<option>...] <command>Usage: %s [<option>...] <executable>|-e<executable> [<option>...]Usage: %s [<option>...] <file>...
+Usage: %s [<option>...] <filename> <section> <priority>
+
+Options:
+  -f<files-list-file>      write files here instead of debian/files.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <old> <new-a> <new-b> [<out>]
+
+Options:
+  -m, --merge-prereleases  merge pre-releases together, ignores everything
+                           after the last '~' in the version.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] [<command>]Usage: %s [<option>...] [<control-file>]Use --help for program usage information.Version number suggests Ubuntu changes, but Maintainer: does not have Ubuntu addressVersion number suggests Ubuntu changes, but there is no XSBC-Original-Maintainer fieldWrote %s entries to output Packages file.aborting due to --abort-on-upstream-changesaborting due to unexpected upstream changes, see %sadd %s in debian/source/include-binaries if you want to store the modified binary in the debian tarballadding %s to %sadministrative directory '%s' does not existan union dependency can only contain simple dependenciesapplying %sarchitecture %s only allowed on its own (list for package %s is '%s')assuming architecture '%s' for '%s'assuming section '%s' for '%s'bad binary-only value: %sbad key-value after ';': '%s'bad line in substvars file %s at line %dbad package control information for '%s'badly formatted heading linebadly formatted trailer linebadly formatted urgency value: %sbadly formed line in files list file, line %dbinaries to analyze should already be installed in their package's directorybinary and diff upload (original source NOT included)binary build with no binary artifacts found; cannot distributebinary control file %sbinary file contents changedbinary-only upload (no source included)block deviceblock lacks the '%s' fieldbuild dependencies/conflicts unsatisfied; abortingbuilding %s in %sbuilding %s using existing %sbuilding a source package without cleaning up as you asked; it might contain undesired filesbuilding source for a binary-only releasebundling: %sbzr status exited nonzerocan't build with source format '%s': %scan't create symlink %scan't parse dependency %scannot change timestamp for %scannot close %scannot combine %s and %scannot continue due to the error abovecannot continue due to the errors listed abovecannot create directory %scannot create directory '%s'cannot find '%s'cannot fork for %scannot fstat file %scannot install output control file '%s'cannot make %s executablecannot merge symbols from objects without SONAMEcannot mkdir %scannot move '%s' to existing filecannot open %scannot open file %scannot opendir %scannot read %scannot read link %scannot read timestamp from %scannot register changes in %s, this patch already existscannot remove %scannot represent change to %s:cannot represent change to %s: %scannot stat %scannot stat directory %scannot stat directory %s (before removal)cannot stat file %scannot stat orig argument %scannot unpack bzr-format source package because bzr is not in the PATHcannot unpack git-format source package because git is not in the PATHcannot write %scharacter '%s' not allowedcharacter devicechdir to %scheck-command '%s' not foundchild processcloning %sclose on tar inputcontinued value line not in fieldcontrol info of a .deb packagecontrol informationcopy of the debian directorycouldn't parse control information from %screated directory '%s'creating shallow clone with depth %sdebian/rules is not executable; fixing thatdefault GNU system type %s for Debian arch %s does not match specified GNU system type %sdetected %d unwanted binary file (add it in debian/source/include-binaries to allow its inclusion).detected %d unwanted binary files (add them in debian/source/include-binaries to allow their inclusion).device or socket is not alloweddiff %s modifies file %s through a symlink: %sdiff %s removes a non-existing file %s (line %d)diff '%s' doesn't contain any patchdiff '%s' finishes in middle of ---/+++ (line %d)diff '%s' patches something which is not a plain filediff on %sdirectorydirectory argument %s is not a directorydiversions involved - output may be incorrectdoesn't contain a bzr repositorydoesn't contain a git repositorydpkg-genchangesduplicate field %s foundduplicate files in %s source package: %sduplicate files list entry for file %s (line %d)entry in dpkg's status fileentry in repository's %s fileepoch part of the version number is not a number: '%s'errorexecutable mode %04o of '%s' will not be represented in diffexpected %s, got %sexpected [ +-] at start of line %d of diff '%s'expected ^--- in line %d of diff '%s'expected ^@@ at line %d of diff '%s'extracting %s in %sextracting unsigned source package (%s)failed to copy %s to %sfailed to rename newly-extracted %s to %sfailed to rename saved %s to %sfailed to verify signature on %sfailed to writefakeroot not found, either install the fakeroot
+package, specify a command with the -r option, or run this as rootfatal error occurred while parsing %sfield cannot start with a hyphenfile %s has no final newline (either original or modified version)file arguments need to existfile removal without proper filename in diff '%s' (line %d)filename, section and priority may contain no whitespacefirst headingformat v3.0 (git) expected %sformat v3.0 (git) unknown file: %sformat v3.0 (git) uses only one .git fileformat v3.0 (git) uses only one .gitshallow filefound blank line where expected %sfound change data where expected %sfound start of entry where expected %sfound trailer where expected %sfull upload (original source is included)full upload; Debian-native package (full source is included)gain-root-command '%s' not foundgeneral section of control info filegit ls-files exited nonzerogit repository %s uses submodules; this is not yet supportedhost architectureif patch '%s' is correctly applied by quilt, use '%s' to update itignoring -sd option for native Debian packageignoring deletion of directory %signoring deletion of symlink %signoring duplicate override entry for %s at line %dignoring duplicate source override entry for %s at line %dignoring override entry for %s, invalid priority %sillegal package name '%s': %sincluding full source code in uploadincorrect value in %s option of %s variable: %sinfoinstall new files list fileinstall new varlist file '%s'invalid dependency got generated: %sinvalid flag in %s: %sinvalid line in %s checksums string: %sinvalid override entry at line %d (%d fields)invalid source override entry at line %d (%d fields)invalid syntax for option in %s, line %dline %d of %s is invalid, it has been ignoredline %d of %s mentions unknown flag %sline after --- isn't as expected in diff '%s' (line %d)line with unknown format (not field-colon-value)local changes detected, the modified files are:local changes have been recorded in a new patch: %smay not be empty stringmissing Priority for binary package %s; using '-'missing Priority for source filesmissing Section for binary package %s; using '-'missing Section for source filesmissing critical source control field %smissing hook %s commandmissing information for critical output field %smissing information for output field %smissing orig.tar or debian.tar file in v2.0 source packagemkdir can be used to create directorymore change data or trailermoved '%s' to '%s'multiple tarfiles in v1.0 source packagemust specify package since control info has many (%s)must start with an alphanumeric characternamed pipenamed socketnative package version may not have a revisionnative package with .orig.tarneed an action optionneed at least a filenameneed at least one executableneed exactly a filename, section and prioritynew libraries appeared in the symbols file: %snewly created empty file '%s' will not be represented in diffno binary packages specified in %sno debian/symbols file used as basis for generating %sno files indicated on command lineno package stanza found in control infono source format specified in %s, see dpkg-source(1)no such directory '%s', try --create-dir (-c) optionno tarfile in Files fieldno upstream tarball found at %snone found, starting from the oldest entrynone of the filenames in ---/+++ are valid in diff '%s' (line %d)nonexistentnot including original source code in uploadnot signing UNRELEASED build; use --force-sign to overrideone to three arguments expectedonly supports gzip compressionorig argument %s is not a plain file or directoryorig argument is empty (means no orig, no diff) but source handling style -s%s wants somethingorig argument is packed but source handling style -s%s calls for unpacked (.orig/)orig argument is unpacked but source handling style -s%s calls for packed (.orig.tar.<ext>)original and modified files are /dev/null in diff '%s' (line %d)package %s has priority %s in control file but %s in files listpackage %s has section %s in control file but %s in files listpackage %s in control file but not in files listpackage %s listed in files list but not in control infopackage %s not in control infopackage %s: package could avoid a useless dependency if %s was not linked against %s (it uses none of the library's symbols)package could avoid a useless dependency if %s were not linked against %s (they use none of the library's symbols)package's section of control info filepacked orig '%s' exists but is not a plain fileparse changes fileparsed version of changelogpatch file '%s' doesn't existpatches are not applied, applying them nowpattern '%s' did not match any filepipe for %splain fileremove patch backup file %sreopen stdinreopen stdoutrepeated key-value %srequired removal of '%s' installed by original tarballrestoring quilt backup files for %srm -rf failed to remove '%s'see diff output belowsetting up shallow cloneseveral orig.tar files found (%s and %s) but only one is allowedshared libs info file '%s' line %d: bad line '%s'short option not allowed in %s, line %dsign-command '%s' not foundskipping '%s'some libraries disappeared in the symbols file: %ssome new symbols appeared in the symbols file: %ssome symbols or patterns disappeared in the symbols file: %ssource changed bysource directory '%s' is not <sourcepackage>-<upstreamversion> '%s'source directory is not the top directory of a bzr repository (%s/.bzr not present), but Format bzr was specifiedsource directory is not the top directory of a git repository (%s/.git not present), but Format git was specifiedsource distributionsource handling style -s%s not allowed with -bsource handling style -s%s not allowed with -xsource packagesource package format '%s' is not supported: %ssource package has two conflicting values - %s and %ssource package name '%s' is illegal: %ssource versionsource-only upload (original source is included)source-only upload: Debian-native packagesource-only, diff-only upload (original source NOT included)special mode %04o of '%s' will not be represented in diffstart of change datasymbol %s used by %s found in none of the librariessymbol information must be preceded by a header (file %s, line %s)symbol name unspecified: %ssymlink to %ssyntax error in %s at line %d: %stakes no non-option argumentstarfile '%s' already exists, not overwriting, giving up; use -sU or -sR to overridethe current version (%s) is earlier than the previous one (%s)the diff modifies the following upstream files: %sthe generated symbols file is emptythe header doesn't match the expected regexthe patch has fuzz which is not allowed, or is malformedthe series file (%s) contains unsupported options ('%s', line %s); dpkg-source might fail when applying patchesthe trailer doesn't match the expected regexthere are no local changes to recordtoo many substitutions - recursive ? - in '%s'tried to merge the same object (%s) twice in a symfiletwo commands specified: --%s and --%sunable to change permission of '%s'unable to chdir to '%s'unable to check for existence of '%s'unable to determine %sunable to execute %sunable to keep orig directory (already exists)unable to open shared libs info file '%s'unable to rename '%s' (newly created) to '%s'unable to rename '%s' to '%s'unable to stat putative unpacked orig '%s'unapplying %suncommitted, not-ignored changes in working directory: %sunexpected end of diff '%s'unknown %% substitution in hook: %%%sunknown %s feature in %s variable: %sunknown Debian architecture %s, you must specify GNU system type, toounknown GNU system type %s, you must specify Debian architecture, toounknown default GNU system type for Debian architecture %sunknown file typeunknown hook name %sunknown host architecture '%s'unknown information field '%s' in input data in %sunknown key-value %sunknown line from diff -u on %s: '%s'unknown option '%s'unknown option or argument %sunknown output from dpkg --search: '%s'unpack target exists: %sunpacked orig '%s' exists but is not a directoryunpacking %sunrecognized dependency field '%s'unrecognized file for a %s source package: %sunrecognized file for a native source package: %sunrecognized lineunrepresentable changes to sourceunsupported checksum '%s'unsupported version of the quilt metadata: %sunwanted binary file: %supstream files that have been modified: %suse newest entry that is earlier than the one specifieduse oldest entry that is later than the one specifieduse the '3.0 (quilt)' format to have separate and documented changes to upstream files, see dpkg-source(1)using a gain-root-command while being rootusing options from %s: %susing source format '%s'vendor fileversion '%s' is invalid: %sversion number cannot be emptyversion number contains illegal character '%s'version number does not start with digitwait for %swarningwrite diversion info to stderrwrite error on control datawrite on tar inputyou can integrate the local changes with %syou can only specify one of 'from' and 'since', using 'since'you can only specify one of 'to' and 'until', using 'until'you can't combine 'count' or 'offset' with any other range optionyou can't use symver tag to catch unversioned symbols: %sProject-Id-Version: dpkg-dev 1.16.8
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2014-12-02 20:24+0100
+Last-Translator: Omar Campagne <ocampagne@gmail.com>
+Language-Team: Spanish <debian-l10n-spanish@lists.debian.org>
+Language: es
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+X-Generator: Virtaal 0.7.1
+
+Esto es software libre; vea la versión 2 o posterior de la Licencia Pública
+General GNU para condiciones de copia. NO hay ninguna garantía.
+  %s (el paquete devuelve %s, no %s)  la versión nueva es %s  la versión antigua es %s«$ORIGIN» se usa en la «RPATH» de %s, y no se pudo identificar el directorio correspondiente debido a la falta de un subdirectorio «DEBIAN» en la raíz de del árbol de construcción del paqueteSe ha omitido %d aviso similar (use «-v» para verlo)Se han omitido otros %d avisos similares (use «-v» para verlos todos)%s contiene una ruta no segura: «%s»%s contiene una referencia irresoluble al símbolo %s: posiblemente sea una extensión%s no se completó en %d segundo%s no se completó en %d segundos%s no existe%s no contiene una firma OpenPGP válida%s no contiene información sobre el paquete fuente%s no menciona ningún paquete binario«%s» no encaja totalmente con «%s»el campo %s contiene el valor %s, pero no existe un archivo de control de pruebas %scampo «%s» del paquete %s:fichero «%s»%s tiene un SONAME inesperado (%s)«%s» es un enlace simbólico«%s» es un enlace simbólico al exterior de «%s»%s está vacío%s no es un nivel de compresión«%s» no es un fichero simple%s no es una compresión compatible%s no es un método de compresión aceptado%s no es un nombre de variable aceptado«%s» no es una opción válida para %s%s no es una versión válida«%s» no es el nombre de un ficherose debe actualizar %s para la compatibilidad con las tareas «build-arch» y «build-indep» (en apariencia, falta «%s»)%s requiere un parámetro%s debería ser un directorio, o no existir%s debería ser un fichero, o no existir%s no debería estar enlazado con %s (no usa ninguno de los símbolos de biblioteca)%s(l%s): %s%s(l%s): %s
+LÍNEA: %sno se permite «%s» con el formato de fuente «%s»«dpkg-deb -I %s control» finalizó con %d, omitiendo paquete«offset» sin «count» no tiene efecto(Use la opción «-d» para anularlo.)Se ha detectado la falta de la opción «--target-format»«-E» y «-W» están obsoletas y no tienen efecto«-b» acepta como máximo un directorio y un argumento de fuentes «orig» (con la versión 1.0 de formato de paquete fuente)-b sólo toma un parámetro con formato «%s»-s%s está obsoleto; utilice siempre el estilo de interfaz gpgla opción «-s%s» invalida la opción «-s%s» anteriorel nombre del directorio «.orig» %s no es <paquete>-<versión-desarrollador-original> (se ha requerido %s)el nombre de «.orig.tar» %s no es <paquete>_<versión-desarollador-original>.orig.tar (se ha requerido %s)<fichero-control> es el fichero de control a procesar («debian/control» por omisión).<entrada estándar><salida estándar>Órdenes:
+  --is <fabricante>           Devuelve cierto si el fabricante actual es <fabricante>.
+  --derives-from <fabricante> Devuelve cierto si el fabricante actual es una derivación
+                              de <fabricante>.
+  --query <campo>             Imprime el contenido de un campo específico de fabricante.
+  --help                      Muestra este mensaje de ayuda.
+  --version                   Muestra la versión.Órdenes:
+  -l, --list             Muestra las variables (por omisión).
+  -L, --list-known       Muestra las arquitecturas válidas (que cumplen un criterio).
+  -e, --equal <arq>      Compara con la arquitectura de Debian actual.
+  -i, --is <arq-comodín> Comprueba si la arquitectura de Debian actual coincide con <arq-comodín>.
+  -q, --query <variable> Sólo muestra el valor de <variable>.
+  -s, --print-set        Muestra la orden para definir variables de entorno.
+  -u, --print-unset      Muestra la orden para desactivar variables de entorno.
+  -c, --command <orden>  Define el entorno y ejecuta la orden en él.
+  -?, --help             Muestra este mensaje de ayuda.
+      --version          Muestra la versión.Debian %s versión %s.
+Los campos de dependencia reconocidos son:
+  %s
+«Dpkg::Compression::Process» sólo puede iniciar un proceso secundario a la vezIntroduzca el nombre del parche:No está disponible File::FcntlLock, se utilizará flock que no es seguro en entornos NFSEl formato «3.0 (custom)» se usa sólo para crear paquetes fuenteOpciones:
+  --vendor <fabricante>     asume que <fabricante> es el fabricante actual.Paquetes en el archivo pero no presentes en el fichero «override»:Paquetes en el fichero «override» pero no en el archivo:Paquetes en el fichero de sustituciones «override» con un valor incorrecto de encargado antiguo:Paquetes que definen el mismo encargado que el fichero «override»:Opciones posicionales (el orden importa):
+  <ejecutable>             Incluye las dependencias para <ejecutable>,
+  -e<ejecutable>           (Utilice -e si el <ejecutable> empieza con «-»)
+  -d<campo-de-dependencia> La o las siguientes órdenes definen
+                           shlibs:<campo-de-dependencia>.Esto es software libre; vea la versión 2 o posterior de la Licencia Pública
+General GNU para condiciones de copia. NO hay ninguna garantía.
+Uso: %s [<orden>]Uso: %s [<opción>...]Uso: %s [<opción>...] <ruta-binario> [<fichero-override> [<prefijo-ruta>]] > Sources
+
+Opciones:
+  -n, --no-sort            No ordena por paquete antes de enviar la
+                           información de salida.
+  -e, --extra-override <fichero>
+                           Usa un fichero «override» adicional.
+  -s, --source-override <fichero>
+                           Usa el fichero para sustituciones («override»)
+                           adicionales, el comportamiento predefinido
+                           es un fichero «override» normal con la
+                           extensión «.src».
+      --debug              Activa el modo de depuración.
+  -?  --help               Muestra este mensaje de ayuda.
+      --version            Muestra la versión.
+
+Consulte la página de manual para una documentación completa.
+Uso: %s [<opción>...] <orden>Uso: %s [<opción>...] <ejecutable>|-e<ejecutable> [<opción>...]Uso: %s [<opción>...] <fichero>...
+Uso: %s [<opción>...] <nombre-fichero> <sección> <prioridad>
+
+Opciones:
+  -f<lista-ficheros>        Escribe los ficheros aquí en vez de
+                            «debian/files».
+  -?, --help                Muestra este mensaje de ayuda.
+      --version             Muestra la versión.
+Uso: %s [<opción>...] <antiguo> <nuevo-a> <nuevo-b> [<salida>]
+
+Opciones:
+  -m, --merge-prereleases  Fusiona pre-publicaciones e ignora todo
+                           después del último «~» en la versión.
+  -?, --help               Muestra este mensaje de ayuda.
+      --version            Muestra la versión.
+Uso: %s [<opción>...] [<orden>]Uso: %s [<opción>...] [<fichero-control>]Use --help para obtener información del uso de este programa.El número de versión sugiere cambios para Ubuntu, pero «Maintainer:» no tiene una dirección de correo de UbuntuEl número de versión sugiere cambios para Ubuntu, pero no hay ningún campo «XSBC-Original-Maintainer»Se han escrito «%s» entradas en el fichero «Packages» de salida.cancelando debido a «--abort-on-upstream-changes» (cambios en la fuente original)cancelando debido a cambios en la fuente original, consulte %sañada «%s» en «debian/source/include-binaries» si desea guardar el binario modificado en el archivo tar de Debianañadiendo «%s» a «%s»el directorio administrativo «%s» no existeuna dependencia de unión (OR - «|») sólo puede contener dependencias simplesaplicando «%s»sólo se permite la arquitectura %s cuando ninguna otra aparece (la lista del paquete %s es «%s»)suponiendo la arquitectura «%s» para «%s»suponiendo la sección «%s» para «%s»valor solo binario incorrecto: %sel valor de la clave después de «;» es inválida: «%s»línea incorrecta en el fichero de sustitución de variables «%s» en la línea %dla información de control del paquete «%s» es inválidala línea de cabecera tiene un formato inválidose ha detectado una línea de separación («trailer») con formato inválidose ha detectado un valor de urgencia («urgency value») con un formato no válido: %slínea inválida en el fichero de lista de ficheros, línea %dLos binarios que analizar ya deberían estar instalados en el directorio de su paquetesubida de binarios y diferencias (NO se incluye la fuente original)construcción binaria sin que se hayan encontrado artefactos binarios; no se puede distribuirfichero binario de control «%s»el contenido del fichero binario ha cambiadosubida sólo de binarios (no se incluye ninguna fuente)dispositivo de bloqueel bloqueo no incluye el campo «%s»Las dependencias y conflictos de construcción no están satisfechas, interrumpiendoconstruyendo %s en %sconstruyendo «%s» usando «%s», que está presente en el sistemaconstruyendo un paquete fuente sin limpiar, como ha definido; puede contener ficheros no deseadosgenerando fuentes para una publicación solo binariaarchivando: %sbzr cerró con un estado distinto de cerono se puede construir con el formato de fuente «%s»: %sno se puede crear el enlace simbólico «%s»no se puede analizar la dependencia %sno se puede cambiar la marca de tiempo de «%s»no se puede cerrar «%s»no se puede combinar «%s» con «%s»No se puede continuar debido al fallo mostradoNo se puede continuar debido a los fallos anterioresno se puede crear el directorio «%s»no se puede crear el directorio «%s»no se puede encontrar «%s»no se puede crear un proceso hijo para %sno se puede obtener el estado (fstat) del fichero «%s»no se ha podido instalar el fichero de control de salida «%s»no se puede dar permisos de ejecución a «%s»no se puede fusionar símbolos de objetos sin «SONAME»no se puede crear el directorio «%s»no se puede mover «%s» a un fichero existenteno se puede abrir «%s»no se ha podido abrir el fichero «%s»no se puede abrir el directorio «%s»no se puede leer %sno se puede leer el enlace «%s»no se puede leer la marca de tiempo desde «%s»no se pueden registrar los cambios en %s, el parche ya existeno se ha podido eliminar «%s»no se puede representar el cambio hecho a %s:no se puede representar el cambio de %s: %sno se puede obtener el estado (stat) de «%s»no se pudo obtener el estado («stat») del directorio «%s»no se puede mostrar el estado (stat) del directorio «%s» (antes de la eliminación)no se puede obtener el estado (stat) del fichero «%s»no se puede definir el estado («stat») del fichero argumento «orig» de %sno se puede desempaquetar el formato de paquete fuente bzr porque bzr no se encuentra en la variable «PATH»no se puede desempaquetar el formato de paquete git porque git no está presente en «PATH»no se pudo escribir «%s»no se permite el carácter «%s»fichero de dispositivo («character device»)chdir a «%s»no se ha encontrado la orden «%s» para hacer la comprobaciónproceso secundario o hijoclonando «%s»cierra con la entrada tarla continuación de la línea del valor no está el campoinformación de control de un paquete «.deb»información de controlcopia del directorio «debian»No se ha podido analizar la información de control de «%s»se ha creado el directorio «%s»creando un clon superficial («shallow») con profundidad %s«debian/rules» no es un fichero ejecutable, reparandoEl tipo de sistema GNU predefinido «%s» para la arquitectura de Debian «%s» no coincide con el tipo de sistema GNU definido «%s»se ha detectado %d fichero binario (añada este en «debian/source/include-binaries» para permitir su inclusión).se han detectado %d ficheros binarios (añada estos en «debian/source/include-binaries» para permitir su inclusión).el dispositivo o socket de Unix no está permitidoel diff «%s» modifica el fichero «%s» a través de un enlace simbólico: %sel diff «%s» elimina el fichero no existente «%s» (línea %d)el diff «%s» no contiene ningún parcheel diff «%s» termina en la mitad de «---/+++» (línea %d)el diff «%s» parchea algo que no es un fichero simplediff de «%s»directorioel argumento de directorio «%s» no es un directorioredirecciones implicadas - puede que la salida sea incorrectano contiene un repositorio bzrno contiene un repositorio gitdpkg-genchangesse ha encontrado un campo duplicado «%s»se han detectado ficheros duplicados en el paquete fuente %s: %sentrada duplicada en la lista de ficheros para el fichero %s (línea %d)entrada en el fichero de estado «status» de dpkg entrada en el fichero %s de repositoriola sección «epoch» del número de versión no es un número: «%s»falloel modo de ejecución «%04o» de «%s» no se representará en el diffse esperaba «%s», se obtuvo «%s»se esperaba [ +-] al principio de la línea %d del diff «%s»se esperaba «^---» en la línea %d del fichero de diferencias «%s»se esperaba ^@@ en la línea %d del diff «%s»extrayendo %s en %sextrayendo el paquete fuente sin firmar (%s)se ha detectado un fallo al copiar %s a %sse ha detectado un fallo al renombrar el recién extraído «%s» como «%s»se ha detectado un fallo al renombrar «%s», guardado, a «%s»se ha detectado un fallo al verificar la firma de %sse ha detectado un fallo al escribirno se ha encontrado fakeroot; puede instalar el paquete fakeroot,
+definir una orden con la opción «-r», o ejecutar esto como administradorse ha detectado un error fatal al analizar %sel campo no puede compenzar con un guiónel fichero «%s» no tiene una nueva línea al final (tanto en la versión original como en la modificada)debe indicar los argumentos de ficherose ha detectado la eliminación de un fichero sin un nombre adecuado en el diff «%s» (línea %d)El nombre de fichero, sección y prioridad no pueden contener espacios en blancoprimera cabecerase esperaba el formato v3.0 (git) %sfichero desconocido con formato v3.0 (git): %sel formato v3.0 (git) sólo usa un fichero «.git»el formato v3.0 (git) sólo usa un fichero «.gitshallow»se ha encontrado una línea en blanco donde se esperaba %sse han encontrado datos de cambios donde se esperaba %sse ha encontrado el principio de una entrada donde se esperaba %sse encontró una línea de separación («trailer») donde se esperaba %ssubida completa (se incluye la fuente original)subida completa; paquete nativo de Debian (se incluye la fuente completa)no se ha encontrado la orden «%s» para convertirse en administradorsección general del fichero de información de control«git ls-files» cerró con un valor distinto de ceroel repositorio de git %s usa submódulos; no es compatible actualmentearquitectura del sistemasi quilt aplica el parche «%s» adecuadamente, utilice «%s» para actualizarloignorando la opción «-sd» para paquetes nativos de Debianignorando la eliminación del directorio «%s»ignorando la eliminación del enlace simbólico «%s»ignorando una entrada duplicada de sustitución («override») para %s en la línea %dignorando una entrada duplicada de sustitución («override») de fuentes para %s en la línea %dignorando la entrada de sustitución («override») para %s, prioridad inválida %snombre de paquete ilegal «%s»: %sincluyendo el código fuente completo en la subidavalor incorrecto en la opción %s de la variable %s: %sinformacióninstalar el nuevo fichero «files» de la lista de ficherosinstalar el nuevo fichero de lista de variables «%s»se ha generado una dependencia inválida: %sse ha detectado una opción inválida en %s: %slínea inválida en la cadena de suma de control %s: %sentrada de sustitución («override») inválida en la línea %d (%d campos)entrada de sustitución («override») de fuente inválida en la línea %d (%d campos)sintaxis inválida para la opción en %s, línea %dla línea %d de %s es inválida, se ha ignoradola línea %d en %s menciona una opción desconocida %sla línea después de «---» no es como se esperaba en el diff «%s» (línea %d)se ha detectado una línea con formato desconocido (no es un valor de campo separado por dos puntos)se han detecta cambios locales, los ficheros modificados son:los cambios locales se han guardado en un parche nuevo: %spuede que no sea una cadena vacíafalta el campo «Priority» para el paquete binario %s; usando «-»falta el campo «Priority» para los ficheros de fuentesfalta el campo «Section» para el paquete binario %s, usando '-'falta el campo «Section» para los ficheros de fuentesfalta el campo crítico de control de las fuentes «%s»falta la orden «hook» %sfalta información en el campo de salida crítico «%s»falta información en el campo de salida «%s»falta un fichero «orig.tar» o «debian.tar» en el paquete fuente versión 2.0se puede usar mkdir para crear un directoriomás cambios de datos o línea de separación («trailer»)se ha movido «%s» a «%s»varios archivos tar en un paquete fuente versión 1.0debe definir un paquete ya que la información de control tiene varios (%s)debe empezar con un carácter alfanuméricotubería nombradasocket de Unix nombradola versión de un paquete nativo puede no tener una revisiónpaquete nativo con «.orig.tar»es necesaria una opción de acciónse requiere al menos un nombre de ficherose requiere al menos un ejecutableSe necesita exactamente un nombre de fichero, sección y prioridadse han detectado nuevas bibliotecas en el fichero «symbols»: «%s»el fichero vacío recién creado «%s» no se representará en el diffno se han definido paquetes binarios en %sno se ha usado ningún fichero «debian/symbols» como base para generar «%s»no se han indicado ficheros en la línea de órdenesno se ha encontrado la declaración del paquete en la información de controlno se ha definido un formato de fuentes en «%s», consulte dpkg-source(1)el directorio «%s» no existe, pruebe la opción «--create-dir» (-c)no existe ningún fichero tar en el campo «Files»no se ha encontrado ningún archivo tar de la fuente original en %sno se ha encontrado nada, iniciando desde la entrada más antiguaninguno de los ficheros en «---/+++» son válidos en el diff «%s» (línea %d)inexistenteno se está incluyendo el código fuente original en la subidano se firmará una construcción de tipo «UNRELEASED», utilice --force-sign para hacerloSe esperan de uno a tres argumentossólo acepta la compresión gzipel argumento «orig» %s no es un fichero simple o directorioel argumento «orig» está vacío (esto es, sin «orig» ni diff) pero el tipo de manipulación de fuentes «-s%s» requiere algoel argumento «orig» esta empaquetado, pero el tipo de manipulación de fuentes «-s%s» invoca uno desempaquetado («.orig/»)el argumento «orig» está desempaquetado, pero el tipo de manipulación de fuentes «-s%s» invoca uno empaquetado («.orig.tar.<ext>»)los ficheros originales y modificados son están en «/dev/null» en el diff «%s» (línea %d)el paquete %s tiene un prioridad %s en el fichero de control pero %s en la lista de ficherosel paquete %s tiene una sección %s en el fichero de control pero %s en la lista de ficherosel paquete %s está presente en el fichero «control» pero no en la lista de ficherosel paquete %s está presente en la lista de ficheros pero no en la información de controlel paquete %s no está en la información de controlpaquete %s:el paquete puede evitar una dependencia superflua si %s no se enlaza con %s (no utiliza ningún símbolo de la biblioteca)el paquete puede evitar una dependencia superflua si %s no se enlaza con %s (no utilizan ningún símbolo de la biblioteca)sección del paquete del fichero de información de controlya existe un «orig» «%s» desempaquetado, pero no es un fichero simpletratar el fichero de cambios «changes»versión analizada del registro de cambiosel fichero de parche «%s» no existeno se han aplicado los parches, aplicándolos en este momentoEl patrón «%s» con coincide con ningún ficherotubería para %sfichero simpleeliminar el fichero de respaldo «%s» del parchereabrir la entrada estándarreabrir la salida estándarel valor de clave %s está repetidase requiere la eliminación de «%s», instalado por el archivo tar originalrestaurando los ficheros de respaldo de quilt para %s«rm -rf» no pudo eliminar «%s»vea la salida del «diff» a continuaciónconfigurando un clon superficial («shallow»)se han encontrado varios fichero «orig.tar» (%s y %s), pero sólo se acepta unofichero de información de bibliotecas compartidas «%s», línea %d: línea incorrecta «%s»no se permite una opción corta en %s, línea %dno se ha encontrado la orden «%s» para firmaromitiendo «%s»han desaparecido algunas bibliotecas en el fichero «symbols»: «%s»han aparecido algunos símbolos nuevos en el fichero «symbols»: «%s»han desaparecido algunos símbolos o patrones en el fichero «symbols»: «%s»fuentes modificadas porel directorio de fuentes «%s» no es <paquete-fuente>-<versión-desarrollador-original> «%s»El directorio de fuentes no es el directorio superior de un repositorio bzr (%s/.bzr no está presente), pero se ha definido «Format bzr»El directorio de fuentes no es el directorio superior de un repositorio git (%s/.git no está presente), pero se ha definido git para «Format»distribución de las fuentesel tipo de manipulación de fuentes «-s%s» no se permite con «-b»el tipo de manipulación de fuentes «-s%s» no se permite con «-x»paquete fuenteno se permite el formato de paquete fuente «%s»: %sel paquete fuente tiene dos valores en conflicto: «%s» y «%s»el nombre de paquete fuente «%s» no es válido: %sversión de las fuentessubida sólo de fuentes (se incluyen las fuentes originales)subida sólo de fuentes: paquete nativos de Debiansólo fuentes, subida sólo de las diferencias, (NO se incluyen las fuentes originales)el modo especial «%04o» de «%s» no se representará en el diffprincipio de los datos de cambiosNo se ha encontrado en ninguna biblioteca el símbolo «%s», usado por %sla información del símbolo se debe preceder con una cabecera (fichero «%s», línea «%s»)el nombre del símbolo no está definido: %senlace simbólico a «%s»se ha encontrado un error de sintaxis en %s en la línea %d: %sno acepta argumentos que no sean una opciónel archivo tar «%s» ya existe, no se va a sobreescribir, cancelando; use «-sU» «-sR» para invalidar este comportamientola versión actual (%s) es más antigua que la anterior (%s)el diff modifica los siguientes ficheros del desarrollador original: %sEl fichero de símbolos generado está vacíola cabecera no coincide con la expresión regular esperadael paquete tiene marcas borrosas lo cual no está permitido, o está corrompidoEl fichero «series» (%s) contiene opciones incompatibles («%s», línea %s); puede que dpkg-source falle al aplicar parchesla línea de separación («trailer») no encaja con la expresión regular esperadano hay cambios locales que guardardemasiadas sustituciones (¿recursivo?) en «%s»se ha intentado fusionar el mismo objeto (%s) dos veces en un fichero simbólicose han definido dos órdenes: «--%s» y «--%s»no se han podido cambiar los permisos de «%s»no se puede ejecutar chdir a «%s»no se pudo comprobar la existencia de «%s»no se pudo determinar «%s»no se pudo ejecutar %sno se pudo conservar el directorio «orig» (ya existe)No se ha podido abrir el fichero de información de bibliotecas compartidas «%s»no se pudo renombrar «%s» (recién creado) como «%s»no se pudo renombrar «%s» a «%s»no se pudo obtener el estado («stat») del fichero «orig» putativo «%s»revirtiendo «%s»se han detectado cambios no ignorados sin enviar («uncommited») en el directorio actual: %sse ha detectado un fin del fichero de diferencias «%s» inesperadovariable de sustitución %% desconocida en gancho: %%%sfuncionalidad %s desconocida en variable %s: %sla arquitectura de Debian %s es desconocida, también debe especificar el tipo de sistema GNUel tipo de sistema GNU %s es desconocido, también debe especificar la arquitectura de Debianel tipo de sistema GNU para la arquitectura de Debian %s es desconocidoel tipo de fichero es desconocidonombre de gancho «%s» desconocidoarquitectura del sistema desconocida «%s»el campo de información «%s» en los datos de entrada en %s es desconocidoel valor de clave %s es desconocidalínea desconocida de «diff -u» en %s: «%s»la opción «%s» es desconocidael argumento u opción «%s» es desconocidola salida de «dpkg --search» es desconocida: «%s»el destino de los datos desempaquetados ya existe: %sel «orig» desempaquetado «%s» existe, pero no es un directoriodesempaquetando %sEl campo de dependencias «%s» es desconocidofichero no reconocido de un paquete fuente %s: %sfichero no reconocido para un paquete fuente nativo: %slínea no reconocidano se pueden representar los cambios hechos a las fuentessuma de control no soportada `%s'la versión de los metadatos de quilt es incompatible: %sfichero binario no deseado: %sficheros de la fuente original que se han modificado: %suse la entrada más reciente que sea antigua que la que se ha definidousar la entrada más antigua que es posterior a la que se ha definidouse el formato «3.0 (quilt)» para que los cambios a los ficheros originales ocurran por separado y de forma documentada, consulte dpkg-source(1)está usando una orden para convertirse en administrador («gain-root-command»), a pesar de que ya es el administradorusando opciones de %s: %susando el formato de fuente «%s»fichero del proveedorla versión «%s» es inválida: %sel número de versión no puede estar vacíoel número de versión contiene el carácter ilegal «%s»el número de versión no comienza con un dígitoesperar a %savisoescribir la información de redirección por la salida de error estándarse ha detectado un error de escritura en los datos de controlescribe en la entrada tarpuede integrar los cambios locales con %ssólo puede definir o bien «from» o «since», usando «since»sólo puede definir o bien «to» o «until», usando «until»no se puede combinar «count» u «offset» con cualquier otra opción de rangono puede usar una etiqueta «symver» para encontrar símbolos sin sin versionar: %s
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/fr.gmo dpkg-1.20.7.1/scripts/po/fr.gmo
--- dpkg-1.20.7.1-orig/scripts/po/fr.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/fr.gmo	2021-06-09 18:25:13.857501754 -0500
@@ -0,0 +1,261 @@
+���,�<H(*I(|t*�*+$+�8+{�+<S, �,J�,@�,=-,O-;|-"�-�-8�-3.L. T.u.�.�.�.�.!�.(/#//S/s/�/l�/0(,0#U0Jy0�0�0/�091&O1v1�1*�1;�1%2!521W2S�2,�2(
+3433)h3F�3I�3H#4l4}4G�4��5i8'�8B�8(�89@39<t9��9"a:I�:��:��=3�A-�A>�A5#B�YB,WC{�CDDl.Db�F!�HA I"bI��I)mJ#�K(�K)�KTLVcL)�L+�L3MgDM�M,�M8�M"NE.N#tN�N�N�N�N(	O(2O[OxO!�O-�OL�O52P>hP�P�PS�PS/Q,�Q'�Q�Q�Q2R3RER\cR)�R�R�R'S9S5QS�S�S�S�S�SUT[TvT�T�T�T�T'�T
+U0$UUU!eU�U�U�U�U�U�U8�U6VGV!fV�V�V)�V�V�VFWFRW�W�W�W�W�W
�W
+XX1*X2\X!�X�X�X�XY*Y,BY,oY�Y$�Y+�YYZ�^Z+[.K[2z[0�[#�[1\54\5j\
+�\	�\(�\-�\ ] -]N]^](w]0�]�]�]6^B^<H^�^>�^5�^/_%>_$d_�_'�_�_ �_ �_`)>`h` �`�`�`r�`%Ga ma=�aB�a*b:b;Wb8�b �b
�b�b"c)<c0fc"�c#�c#�c&d)d)Id<sd �d$�d�d<eOeBae-�e!�e?�e4f3Tf:�f3�f�f$g/:gjgog�g$�g�g�g'�g-!h4Oh(�h-�h&�h7i0:i/ki3�i�i?�i9'j1aj!�j0�j �j9kAk(\k�k0�k'�k:�k%1lWlsl(�l5�l)�l
+mm.'mVmtm�m�m-�m�m.
n=<nzn0�n&�n"�n6omHo"�o'�o4p46pkp�p6�p*�pAqIq,Uq:�q�q�q1�q^.rR�r[�r_<s@�s�s,�s]%tL�t?�t>u0Ou7�u�u�u��u&�v/�vw2wNw*lw#�w�w
+�w�w�w
�w	x6x#Vxzx�x�x@�x1y'9yay
}y2�y1�y<�y-zC?zq�zq�zg{.{{.�{�{/�{5|'N|v|0�|)�|<�|9}W}3l}B�}�}
�}!
~/~SM~>�~2�~#+78co�,�$9�.^�6��%Ā#��%&�4L�-����Ɓ.ہ)
+�4�-N�|�*��
ł9ӂ(
�6�R�%o�%��E��E�:G�������2Ȅ��%�6�J�h�'����0�"�-#�1Q���!����-ц��*�7C�5{�j��*�G�a�z�������.߈(�7�C�K�j���+��=ŉ;�A?�9������S���׏����0���Q��.��u,�N���/�51�#g�(��Y���
+(�#3�W�.q���%��Ҕ$�-�+C�'o� �� ��ٕY�1x�-��Zؖ
3�A�;Y�=��1ӗ#�)�5F�L|�*ɘ$��F�r`�7ә2�E>�1��E��F��\C������ś8V���'��LΠ*�.F�au�nס�F�$@�^e�mģ�2�=�=?�V}�CԬ,�?E����B�a�������"�C/�-s�5��{׶$S�6x�E������{�.��,-�=Z�x���,#�EP���\��%�,-�$Z�/�+��,ۼ5�>�[� t�:��\н\-�G��Ҿ%������>!�>`���+��B��"�.=�{l�;��$� ?�@`�(��P��'�*C�$n�����n��&:�.a���!����#��C�#K�Bo�&��;���!,�%N�t��� ��Z��$�0?�3p���)��5��"�0=�bn�b��4�#L�p�
��$����
����U��9O�+��)������'�9<�Cv�@����M�/g�z��6�&I�Qp�M��P�Ca�:��H��?)�i�u�2��6����
+�)�9�>L�U��'��%	�Y/���_����O�3U�L��L��:#�^�-w���8��-��-*�2X�6��+����,��.�1��.�H3�^|�4��/�J@�:��/�����0&�1W�8��"�� ��#�(*�!S�2u�G��L��'=�'e�P����k��7]�&��X��*�'@�Sh�7��-��?"�:b���5��*��2�6�!T�@v�&��U��14�7f�0��H��N�Ag�K��"��O�Kh�Q��*�B1�(t�H��&��%
�/3�;c�0��B��6�4J�(�1��N��0)�Z�f�@|�����*��'"�CJ�"��E��i��"a�<��7��&��C ��d�1��O!�9q�F��&��%�F?�7��t��
+3�E>�f��(�� �>5�`t�d��o:�s��`��,�����m_�x��tF�U��T�3f���5��&��K�R�m�0��F��2�7�
D�7R���"����M��8'�#`�8��!��T��c4�3��$����C�KH�F����R��uA�u��-�4A�4v�
��=��6��=.�l�>{�1��j��\W�$��>��^�#w���.��&��i	�Hs�D��*�A,�Gn����YQ)�;�M)_4�4�1�B%@h��:�JfE�/�:�
7WE2�!��65ISQ�F%l�&�H�0+\w�(�"�U�U+f<�6�	-	,G	2t	$�	�	J�	J6
+��
+`'r'�%�'�,,=Ej4�
�
�-
0/
`
7
_�
]Zu]�\;����2�����9��j�xb�A��q��<�����a^.>���n�Q�KyW�gM�Z�cdBG�C�rZ�KYy�@�/&$��h��������,0����$�EN�A+lf��<�G�]�����x�`�������P��Q�������|�s��D�D�R"q=l�F�O�'F*4����>7�
��9C�i��4%���\,p��6�I[�#j����z_�g:v�
+�������{��B��S���H^]P���!o�[5��t�d`Mi	&f�����w��1�S�}�8 ����T�N��)�c(�b�{���mr�����5���RJ�0�YX�OH�V)�!�*�
���JW~�� ��v;�?u��X�T�7�"+E���u��?@�~k���:
+a�m�U���e�Vs�/���'e�=1��h�	-8���}tL�2�_#-�n��|�(I����p���.k���U�w�L3�6�3�o%z
+Options:
+  -a, --no-architecture    no architecture part in filename.
+  -o, --overwrite          overwrite if file exists.
+  -k, --symlink            don't create a new file, but a symlink.
+  -s, --subdir [dir]       move file into subdirectory (use with care).
+  -c, --create-dir         create target directory if not there (use with care).
+  -?, --help               show this help message.
+  -v, --version            show the version.
+
+file.deb changes to <package>_<version>_<architecture>.<package_type>
+according to the 'underscores convention'.
+
+This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+  %s (package says %s, not %s)  new version is %s  old version is %s$ORIGIN is used in RPATH of %s and the corresponding directory could not be identified due to lack of DEBIAN sub-directory in the root of package's build tree%d similar warning has been skipped (use -v to see it)%d other similar warnings have been skipped (use -v to see them all)%s and %s fields are required to compute the source basename%s contains an insecure path: %s%s contains an unresolvable reference to symbol %s: it's probably a plugin%s didn't complete in %d second%s didn't complete in %d seconds%s does not exist%s doesn't contain a valid OpenPGP signature%s doesn't contain any information about the source package%s doesn't list any binary package%s doesn't match completely %s%s field contains value %s, but no tests control file %s%s field of package %s: %s file%s has an unexpected SONAME (%s)%s is a symlink%s is a symlink to outside %s%s is empty%s is not a compression level%s is not a plain file%s is not a supported compression%s is not a supported compression method%s is not a supported variable name%s is not a valid option for %s%s is not a valid version%s is not the name of a file%s must be updated to support the 'build-arch' and 'build-indep' targets (at least '%s' seems to be missing)%s needs a parameter%s should be a directory or non-existing%s should be a file or non-existing%s should not be linked against %s (it uses none of the library's symbols)%s(l%s): %s%s(l%s): %s
+LINE: %s'%s' is not supported by the source format '%s''dpkg-deb -I %s control' exited with %d, skipping package'offset' without 'count' has no effect(Use -d flag to override.)--%s needs a directory--%s needs at least one argument, the .dsc--%s needs the .dsc file as first argument, not a directory--%s takes no more than two arguments--target-format option is missing-E and -W are deprecated, they are without effect-b takes at most a directory and an orig source argument (with v1.0 source package)-b takes only one parameter with format '%s'-i%s is deprecated; it is without effect-s%s is deprecated; always using gpg style interface-s%s option overrides earlier -s%s option.orig directory name %s is not <package>-<upstreamversion> (wanted %s).orig.tar name %s is not <package>_<upstreamversion>.orig.tar (wanted %s)<control-file> is the control file to process (default: debian/control).<standard input><standard output>Commands:
+  --is <vendor>           returns true if current vendor is <vendor>.
+  --derives-from <vendor> returns true if current vendor derives from <vendor>.
+  --query <field>         print the content of the vendor-specific field.
+  --help                  show this help message.
+  --version               show the version.Commands:
+  -l, --list                list variables (default).
+  -L, --list-known          list valid architectures (matching some criteria).
+  -e, --equal <arch>        compare with host Debian architecture.
+  -i, --is <arch-wildcard>  match against host Debian architecture.
+  -q, --query <variable>    prints only the value of <variable>.
+  -s, --print-set           print command to set environment variables.
+  -u, --print-unset         print command to unset environment variables.
+  -c, --command <command>   set environment and run the command in it.
+  -?, --help                show this help message.
+      --version             show the version.Debian %s version %s.
+Dependency fields recognized are:
+  %s
+Dpkg::Compression::Process can only start one subprocess at a timeDpkg::Shlibs::Objdump couldn't parse %s
+Enter the desired patch name: File::FcntlLock not available; using flock which is not NFS-safeFormat '3.0 (custom)' is only used to create source packagesNote: libraries are not searched in other binary packages that do not have any shlibs or symbols file.
+To help dpkg-shlibdeps find private libraries, you might need to use -l.OpenPGP signature not allowed hereOptions:
+  --vendor <vendor>       assume <vendor> is the current vendor.Options:
+  -A             ignore Build-Depends-Arch and Build-Conflicts-Arch.
+  -B             ignore Build-Depends-Indep and Build-Conflicts-Indep.
+  -I             ignore built-in build dependencies and conflicts.
+  -d build-deps  use given string as build dependencies instead of
+                 retrieving them from control file
+  -c build-conf  use given string for build conflicts instead of
+                 retrieving them from control file
+  -a arch        assume given host architecture
+  -P profiles    assume given build profiles (comma-separated list)
+  --admindir=<directory>
+                 change the administrative directory.
+  -?, --help     show this help message.
+      --version  show the version.Options:
+  -p<package>              print control file for package.
+  -c<control-file>         get control info from this file.
+  -l<changelog-file>       get per-version info from this file.
+  -F<changelog-format>     force changelog format.
+  -v<force-version>        set version of binary package.
+  -f<files-list-file>      write files here instead of debian/files.
+  -P<package-build-dir>    temporary build directory instead of debian/tmp.
+  -n<filename>             assume the package filename will be <filename>.
+  -O[<file>]               write to stdout (or <file>), not .../DEBIAN/control.
+  -is, -ip, -isp, -ips     deprecated, ignored for compatibility.
+  -D<field>=<value>        override or add a field and value.
+  -U<field>                remove a field.
+  -V<name>=<value>         set a substitution variable.
+  -T<substvars-file>       read variables here, not debian/substvars.
+  -?, --help               show this help message.
+      --version            show the version.
+Packages in archive but missing from override file:Packages in override file but not in archive:Packages in override file with incorrect old maintainer value:Packages specifying same maintainer as override file:Positional options (order is significant):
+  <executable>             include dependencies for <executable>,
+  -e<executable>           (use -e if <executable> starts with '-')
+  -d<dependency-field>     next executable(s) set shlibs:<dependency-field>.Press <enter> to start the signing process.
+This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Usage: %s [<command>]Usage: %s [<option>...]Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Packages
+
+Options:
+  -t, --type <type>        scan for <type> packages (default is 'deb').
+  -a, --arch <arch>        architecture to scan for.
+  -h, --hash <hash-list>   only generate hashes for the specified list.
+  -m, --multiversion       allow multiple versions of a single package.
+  -e, --extra-override <file>
+                           use extra override file.
+  -M, --medium <medium>    add X-Medium field for dselect multicd access method
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Sources
+
+Options:
+  -n, --no-sort            don't sort by package before outputting.
+  -e, --extra-override <file>
+                           use extra override file.
+  -s, --source-override <file>
+                           use file for additional source overrides, default
+                           is regular override file with .src appended.
+      --debug              turn debugging on.
+  -?, --help               show this help message.
+      --version            show the version.
+
+See the man page for the full documentation.
+Usage: %s [<option>...] <command>Usage: %s [<option>...] <executable>|-e<executable> [<option>...]Usage: %s [<option>...] <file>...
+Usage: %s [<option>...] <filename> <section> <priority>
+
+Options:
+  -f<files-list-file>      write files here instead of debian/files.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <old> <new-a> <new-b> [<out>]
+
+Options:
+  -m, --merge-prereleases  merge pre-releases together, ignores everything
+                           after the last '~' in the version.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] [<command>]Usage: %s [<option>...] [<control-file>]Use --help for program usage information.Version number suggests Ubuntu changes, but Maintainer: does not have Ubuntu addressVersion number suggests Ubuntu changes, but there is no XSBC-Original-Maintainer fieldWrote %s entries to output Packages file.aborting due to --abort-on-upstream-changesaborting due to unexpected upstream changes, see %sadd %s in debian/source/include-binaries if you want to store the modified binary in the debian tarballadding %s to %sadministrative directory '%s' does not existan union dependency can only contain simple dependenciesapplying %sarchitecture %s only allowed on its own (list for package %s is '%s')assuming architecture '%s' for '%s'assuming section '%s' for '%s'bad binary-only value: %sbad changelog format namebad key-value after ';': '%s'bad line in substvars file %s at line %dbad package control information for '%s'badly formatted heading linebadly formatted trailer linebadly formatted urgency value: %sbadly formed line in files list file, line %dbinaries to analyze should already be installed in their package's directorybinary and diff upload (original source NOT included)binary build with no binary artifacts found; cannot distributebinary control file %sbinary file contents changedbinary-only arch-indep upload (source code and arch-specific packages not included)binary-only arch-specific upload (source code and arch-indep packages not included)binary-only upload (no source code included)binary-only upload (no source included)block deviceblock lacks the '%s' fieldbuild dependencies/conflicts unsatisfied; abortingbuilding %s in %sbuilding %s using existing %sbuilding a source package without cleaning up as you asked; it might contain undesired filesbuilding source for a binary-only releasebundling: %sbzr status exited nonzerocan't build with source format '%s': %scan't create symlink %scan't extract name and version from library name '%s'can't parse dependency %scan't read directory %s: %scannot change timestamp for %scannot close %scannot combine %s and %scannot continue due to the error abovecannot continue due to the errors listed abovecannot create directory %scannot create directory '%s'cannot find '%s'cannot find an editorcannot fork for %scannot fstat file %scannot install output control file '%s'cannot make %s executablecannot merge symbols from objects without SONAMEcannot mkdir %scannot move '%s' to existing filecannot open %scannot open file %scannot opendir %scannot read %scannot read link %scannot read timestamp from %scannot register changes in %s, this patch already existscannot remove %scannot represent change to %s:cannot represent change to %s: %scannot stat %scannot stat directory %scannot stat directory %s (before removal)cannot stat file %scannot stat orig argument %scannot unpack bzr-format source package because bzr is not in the PATHcannot unpack git-format source package because git is not in the PATHcannot write %scharacter '%s' not allowedcharacter devicechdir to %scheck-command '%s' not foundchild processcloning %sclose on tar inputconflicting checksums '%s' and '%s' for file '%s'conflicting file sizes '%u' and '%u' for file '%s'continued value line not in fieldcontrol info of a .deb packagecontrol informationcopy of the debian directorycouldn't close stdoutcouldn't parse control information from %scouldn't parse dynamic relocation record: %scouldn't parse dynamic symbol definition: %screated directory '%s'creating shallow clone with depth %sdebian/rules is not executable; fixing thatdefault GNU system type %s for Debian arch %s does not match specified GNU system type %sdetected %d unwanted binary file (add it in debian/source/include-binaries to allow its inclusion).detected %d unwanted binary files (add them in debian/source/include-binaries to allow their inclusion).device or socket is not alloweddiff %s modifies file %s through a symlink: %sdiff %s patches file with C-style encoded filenamediff %s removes a non-existing file %s (line %d)diff '%s' doesn't contain any patchdiff '%s' finishes in middle of ---/+++ (line %d)diff '%s' patches file with name ending in .dpkg-origdiff '%s' patches something which is not a plain filediff on %sdirectorydirectory argument %s is not a directorydiversions involved - output may be incorrectdoesn't contain a bzr repositorydoesn't contain a git repositorydpkg-genchangesduplicate field %s foundduplicate files in %s source package: %sduplicate files list entry for file %s (line %d)entry in dpkg's status fileentry in repository's %s fileepoch part of the version number is not a number: '%s'errorexecutable mode %04o of '%s' will not be represented in diffexpected %s, got %sexpected OpenPGP signature, found end of file after blank lineexpected OpenPGP signature, found something else '%s'expected [ +-] at start of line %d of diff '%s'expected ^--- in line %d of diff '%s'expected ^@@ at line %d of diff '%s'extracting %s in %sextracting unsigned source package (%s)failed to copy %s to %sfailed to get a write lock on %sfailed to parse a line in %s: %sfailed to parse line in %s: %sfailed to rename newly-extracted %s to %sfailed to rename saved %s to %sfailed to verify signature on %sfailed to writefailed when writing stdoutfakeroot not found, either install the fakeroot
+package, specify a command with the -r option, or run this as rootfatal error occurred while parsing %sfield cannot start with a hyphenfile %s has checksum %s instead of expected %s (algorithm %s)file %s has no final newline (either original or modified version)file %s has size %u instead of expected %ufile arguments need to existfile removal without proper filename in diff '%s' (line %d)filename, section and priority may contain no whitespacefirst block lacks a Source fieldfirst headingformat v3.0 (git) expected %sformat v3.0 (git) unknown file: %sformat v3.0 (git) uses only one .git fileformat v3.0 (git) uses only one .gitshallow filefound blank line where expected %sfound change data where expected %sfound end of file where expected %sfound start of entry where expected %sfound trailer where expected %sfull upload (original source is included)full upload; Debian-native package (full source is included)gain-root-command '%s' not foundgeneral section of control info filegit ls-files exited nonzerogit repository %s uses submodules; this is not yet supportedhost architectureif patch '%s' is correctly applied by quilt, use '%s' to update itignoring -sd option for native Debian packageignoring deletion of directory %signoring deletion of file %s, use --include-removal to overrideignoring deletion of symlink %signoring duplicate override entry for %s at line %dignoring duplicate source override entry for %s at line %dignoring override entry for %s, invalid priority %sillegal package name '%s': %sincluding full source code in uploadincorrect value in %s option of %s variable: %sinfoinstall new files list fileinstall new varlist file '%s'invalid dependency got generated: %sinvalid filename %sinvalid flag in %s: %sinvalid line in %s checksums string: %sinvalid override entry at line %d (%d fields)invalid source override entry at line %d (%d fields)invalid syntax for option in %s, line %dline %d of %s is invalid, it has been ignoredline %d of %s mentions unknown flag %sline after --- isn't as expected in diff '%s' (line %d)line with unknown format (not field-colon-value)local changes detected, the modified files are:local changes have been recorded in a new patch: %smay not be empty stringmismatched addon orig.tar %s for signature %s in source packagemismatched orig.tar %s for signature %s in source packagemissing Priority for binary package %s; using '-'missing Priority for source filesmissing Section for binary package %s; using '-'missing Section for source filesmissing addon orig.tar for signature %s in source packagemissing changelog filenamemissing critical source control field %smissing hook %s commandmissing information for critical output field %smissing information for output field %smissing orig.tar or debian.tar file in v2.0 source packagemkdir can be used to create directorymore change data or trailermoved '%s' to '%s'multiple tarfiles in v1.0 source packagemust specify package since control info has many (%s)must start with an alphanumeric characternamed pipenamed socketnative package version may not have a revisionnative package with .orig.tarneed an action optionneed at least a filenameneed at least one executableneed exactly a filename, section and priorityneeds at least three argumentsnew libraries appeared in the symbols file: %snewly created empty file '%s' will not be represented in diffnext heading or end of fileno Package field found in '%s', skipping packageno Package field in control file of %sno binary packages specified in %sno debian/symbols file used as basis for generating %sno dependency information found for %s (used by %s)
+Hint: check if the library actually comes from a package.no files indicated on command lineno package stanza found in control infono source format specified in %s, see dpkg-source(1)no such directory '%s', try --create-dir (-c) optionno tarfile in Files fieldno upstream tarball found at %snon-native package version does not contain a revisionnone found, starting from the oldest entrynone of the filenames in ---/+++ are valid in diff '%s' (line %d)nonexistentnot including original source code in uploadnot signing UNRELEASED build; use --force-sign to overrideone to three arguments expectedonly supports gzip compressionorig argument %s is not a plain file or directoryorig argument is empty (means no orig, no diff) but source handling style -s%s wants somethingorig argument is packed but source handling style -s%s calls for unpacked (.orig/)orig argument is unpacked but source handling style -s%s calls for packed (.orig.tar.<ext>)orig directory '%s' already exists, not overwriting, giving up; use -sA, -sK or -sP to overrideoriginal and modified files are /dev/null in diff '%s' (line %d)override file %s not foundpackage %s (filename %s) has Filename field!package %s (filename %s) is repeat but newer version; used that one and ignored data from %s!package %s (filename %s) is repeat; ignored that one and using data from %s!package %s has priority %s in control file but %s in files listpackage %s has section %s in control file but %s in files listpackage %s in control file but not in files listpackage %s listed in files list but not in control infopackage %s not in control infopackage %s: package could avoid a useless dependency if %s was not linked against %s (it uses none of the library's symbols)package could avoid a useless dependency if %s were not linked against %s (they use none of the library's symbols)package's section of control info filepacked orig '%s' exists but is not a plain fileparse changes fileparsed version of changelogpatch file '%s' doesn't existpatches are not applied, applying them nowpattern '%s' did not match any filepipe for %splain fileremove patch backup file %sreopen stdinreopen stdoutrepeated key-value %srequired removal of '%s' installed by original tarballrestoring quilt backup files for %srm -rf failed to remove '%s'see diff output belowsetting up shallow cloneseveral orig.tar files found (%s and %s) but only one is allowedshared libs info file '%s' line %d: bad line '%s'short option not allowed in %s, line %dsign-command '%s' not foundskipping '%s'some libraries disappeared in the symbols file: %ssome new symbols appeared in the symbols file: %ssome symbols or patterns disappeared in the symbols file: %ssource changed bysource directory '%s' is not <sourcepackage>-<upstreamversion> '%s'source directory is not the top directory of a bzr repository (%s/.bzr not present), but Format bzr was specifiedsource directory is not the top directory of a git repository (%s/.git not present), but Format git was specifiedsource distributionsource handling style -s%s not allowed with -bsource handling style -s%s not allowed with -xsource packagesource package format '%s' is not supported: %ssource package has two conflicting values - %s and %ssource package name '%s' is illegal: %ssource versionsource-only upload (original source is included)source-only upload: Debian-native packagesource-only, diff-only upload (original source NOT included)special mode %04o of '%s' will not be represented in diffstart of change datasymbol %s used by %s found in none of the librariessymbol information must be preceded by a header (file %s, line %s)symbol name unspecified: %ssymlink to %ssyntax error in %s at line %d: %stakes no non-option argumentstarfile '%s' already exists, not overwriting, giving up; use -sU or -sR to overridethe current version (%s) is earlier than the previous one (%s)the diff modifies the following upstream files: %sthe generated symbols file is emptythe header doesn't match the expected regexthe patch has fuzz which is not allowed, or is malformedthe series file (%s) contains unsupported options ('%s', line %s); dpkg-source might fail when applying patchesthe trailer doesn't match the expected regexthere are no local changes to recordtoo many substitutions - recursive ? - in '%s'tried to merge the same object (%s) twice in a symfiletwo commands specified: --%s and --%sunable to change permission of '%s'unable to chdir to '%s'unable to check for existence of '%s'unable to check for existence of orig directory '%s'unable to check for removal of directory '%s'unable to determine %sunable to execute %sunable to keep orig directory (already exists)unable to open shared libs info file '%s'unable to rename %s to %sunable to rename '%s' (newly created) to '%s'unable to rename '%s' to '%s'unable to stat putative unpacked orig '%s'unapplying %suncommitted, not-ignored changes in working directory: %sunconditional maintainer override for %sunexpected end of diff '%s'unfinished OpenPGP signatureunknown %% substitution in hook: %%%sunknown %s feature in %s variable: %sunknown Debian architecture %s, you must specify GNU system type, toounknown GNU system type %s, you must specify Debian architecture, toounknown default GNU system type for Debian architecture %sunknown file typeunknown hook name %sunknown host architecture '%s'unknown information field '%s' in input data in %sunknown key-value %sunknown line from diff -u on %s: '%s'unknown option '%s'unknown option or argument %sunknown output format %sunknown output from dpkg --search: '%s'unpack target exists: %sunpacked orig '%s' exists but is not a directoryunpacking %sunrecognized dependency field '%s'unrecognized file for a %s source package: %sunrecognized file for a native source package: %sunrecognized lineunrepresentable changes to sourceunsupported checksum '%s'unsupported version of the quilt metadata: %sunwanted binary file: %supstream files that have been modified: %suse newest entry that is earlier than the one specifieduse oldest entry that is later than the one specifieduse the '3.0 (quilt)' format to have separate and documented changes to upstream files, see dpkg-source(1)using a gain-root-command while being rootusing options from %s: %susing source format '%s'vendor %s doesn't exist in %svendor fileversion '%s' is invalid: %sversion number cannot be emptyversion number contains illegal character '%s'version number does not start with digitwait for %swarningwrite diversion info to stderrwrite error on control datawrite on tar inputyou can integrate the local changes with %syou can only specify one of 'from' and 'since', using 'since'you can only specify one of 'to' and 'until', using 'until'you can't combine 'count' or 'offset' with any other range optionyou can't use symver tag to catch unversioned symbols: %sProject-Id-Version: dpkg-dev 1.17.7
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-09-08 15:39+0200
+Last-Translator: Sébastien Poher <sbphr@volted.net>
+Language-Team: French <debian-l10n-french@lists.debian.org>
+Language: fr
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=n>1;
+X-Generator: Lokalize 1.4
+
+Options:
+  -a, --no-architecture    pas de partie architecture dans le nom de fichier.
+  -o, --overwrite          écraser si le fichier existe.
+  -k, --symlink            ne pas créer de nouveau fichier mais un lien symbolique.
+  -s, --subdir [dir]       déplacer le fichier dans u sous-répertoire (utiliser                            avec précaution).
+  -c, --create-dir         créer le répertoire cible si absent (utiliser avec                            précaution).
+  -?, --help               afficher ce message d'aide.
+  -v, --version            afficher la version.
+
+modification de fichier.deb en <paquet>_<version>_<architecture>.<type_paquet>
+selon la « convention des 'underscores' ».
+
+Ce logiciel est un logiciel libre. Voyez la licence « GNU General Public License »
+dans la version 2 ou une version supérieure pour les conditions de copie. Il n'y a PAS de garantie.
+  %s (le paquet dit %s, pas %s)  la nouvelle version est %s  l'ancienne version est %s$ORIGIN est utilisé dans le RPATH de %s et le répertoire correspondant n'a pas pu être identifié en raison de l'absence de sous-répertoire DEBIAN dans la racine de l'arborescence de construction du paquet%d autre avertissement semblable a été sauté (utiliser -v pour les voir tous)%d autres avertissements semblables ont été sautés (utiliser -v pour les voir tous).les champs %s et %s sont indispensables pour calculer le nom de base de la source%s contient un chemin d'accès non sûr : %s%s contient une référence au symbole %s qui ne peut être résolue : il peut s'agir d'un greffon (« plugin »)%s ne s'est pas terminé en %d seconde%s ne s'est pas terminé en %d secondes%s n'existe pas%s ne contient pas de signature OpenPGP valable%s ne contient pas d'information sur le paquet source%s ne comporte aucun paquet binaire%s ne correspond pas complètement à %sle champ %s contient la valeur %s, mais il n'y a pas de fichier de contrôle des tests %schamp %s du paquet %s : fichier %s%s utilise un SONAME inattendu (%s)%s est un lien symbolique%s est un lien symbolique vers l'extérieur %s%s est vide%s n'est pas un niveau de compression%s n'est pas un fichier texte%s n'est pas une compression gérée%s n'est pas une méthode compression gérée%s n'est pas le nom d'une variable reconnue%s n'est pas une option valable pour %s%s n'est pas une version valable%s n'est pas le nom d'un fichier%s doit être mis à jour pour gérer les cibles « build-arch » et « build-indep » (au moins « %s » semble manquer)paramètre nécessaire pour %s%s devrait être un répertoire ou ne pas exister%s devrait être un fichier ou ne pas exister%s ne devrait pas être lié avec %s (il n'utilise aucun des symboles de la bibliothèque)%s(l%s) : %s%s(l%s): %s
+LIGNE : %s« %s » n'est pas géré par le format source « %s »« dpkg-deb -I %s control », sortie avec %d, paquet sauté« offset » sans « count » n'a aucun effet(Utilisez l'option -d pour forcer.)--%s requiert un répertoire--%s requiert au moins un paramètre, le fichier .dsc--%s requiert le fichier .dsc comme premier paramètre et non un répertoire--%s ne prend pas plus de deux paramètresl'option --target-format est absenteLa gestion de -E et -W est obsolète (ces paramètres sont sans effet)il faut au plus un paramètre répertoire et un paramètre source d'origine avec -b (pour les paquets source v1.0)-b n'utilise qu'un paramètre avec le format « %s »-i%s est obsolète ; ce paramètre est sans effet-s%s est obsolète ; l'interface utilisée est toujours de type gpgl'option -s%s annule une précédente option -s%srépertoire .orig %s n'est pas <paquet>-<version_amont> (%s demandé).orig.tar %s n'est pas <paquet>_<version_amont>.orig.tar (%s demandé)<fichier de contrôle> est le fichier de contrôle à traiter (par défaut, debian/control).<entrée standard><sortie standard>Commandes:
+  --is <fabriquant>             renvoie « vrai » si le fabriquant actuel est <vendor>.
+  --derives-from <fabriquant>   renvoie « vrai » si le fabriquant actuel provient de <fabriquant>.
+  --query <champ>               afficher le contenu du champ propre au fabriquant.
+  --help                        afficher ce message d'aide.
+  --version                     afficher la version.Commandes :
+  -l, --list                     lister les variables (défaut).
+  -L, --list-known               lister les architectures valides (en fonction de critères).
+  -e, --equal <arch>             comparer avec l'architecture Debian en cours.
+  -i, --is <arch-joker>          vérifier que l'architecture Debian en cours est <arch-joker>.
+  -q, --query <variable>         n'afficher que la valeur de <variable>.
+  -s, --print-set                afficher la commande pour définir les variables d'environnement.
+  -u, --print-unset              afficher la commande pour annuler les variables d'environnement.
+  -c, --command <commande>       mettre en place l'environnement et y exécuter la commande.
+  -?, --help                     afficher ce message d'aide.
+      --version                  afficher la version.Debian %s version %s.
+Champs de dépendance reconnus :
+  %s
+Dpkg::compression::Process ne peut démarrer qu'un sous-processus à la foisDpkg::Shlibs::Objdump ne peut analyser %s
+Saisissez le nom du fichier de différences : Fichier::FcntlLock non disponible; utilisation de « flock » qui n'est pas sécurisé pour NFSLe format « 3.0 (personnalisé) » (« 3.0 (custom) ») n'est utilisé que pour créer des paquets sourceNote : les bibliothèques ne sont pas recherchées dans d'autres paquets binaires qui n'ont pas de fichier shlibs ou de fichier de symboles.
+Pour aider dpkg-shlibdeps à trouver des bibliothèques privées, vous pourriez avoir besoin d'utiliser -l.signature OpenPGP non autorisée iciOptions :
+  --vendor <fabriquant>         supposer que <fabriquant> est le fabriquant actuel.Options :
+  -A             ignorer Build-Depends-Arch et Build-Conflicts-Arch.
+  -B             ignorer Build-Depends-Indep et Build-Conflicts-Indep.
+  -I             ignorer les dépendances internes de construction et les conflits.
+  -d build-deps  utiliser la chaîne indiquée comme dépendances de construction (« build deps ») plutôt que de les récupérer du fichier de contrôle
+  -c build-conf  utiliser la chaîne indiquée comme conflit de construction
+                 (« build conflicts ») plutôt que de les récupérer du fichier control
+  -a arch        supposer que l'architecture est celle mentionnée
+  -P profiles    supposer que les profils de construction sont ceux mentionnés
+  --admindir=<répertoire>
+                 changer le répertoire d'administration.
+  -?, --help     afficher ce message d'aide.
+      --version  afficher la version.Options :
+  -p<paquet>                 afficher le fichier de contrôle du paquet.
+  -c<fichier_de_contrôle>    obtenir les informations de contrôle dans ce fichier.
+  -l<fichier_changelog>      obtenir les informations par version de ce fichier.
+  -F<changelogformat>        forcer le format de changelog.
+  -v<forceversion>           définir la version du paquet binaire.
+  -f<fichier-des-fichiers>   écrire la liste des fichiers dans ce fichier, plutôt que dans debian/files.
+  -P<packagebuilddir>        répertoire temporaire de construction, au lieu de debian/tmp.
+  -n<fichier>                supposer que le nom du paquet sera <fichier>.
+  -O[<fichier>]              écrire sur la sortie standard (ou <fichier>), pas .../DEBIAN/control.
+  -is, -ip, -isp, -ips       options déconseillées, ignorées pour compatibilité.
+  -D<champ>=<valeur>         remplacer ou ajouter une paire champ et valeur.
+  -U<champ>                  supprimer un champ.
+  -V<nom>=<valeur>           définir une substitution de variable.
+  -T<fichier-substvars>      lire les variables dans ce fichier, pas dans debian/substvars.
+  -?, --help                 afficher ce message d'aide.
+      --version              afficher la version.
+Paquets dans l'archive mais pas dans le fichier d'override :Paquets dans le fichier d'override mais pas dans l'archive :Paquets dans le fichier d'override avec valeur incorrecte pour l'ancien responsable :Paquets indiquant le même responsable que le fichier d'override :Options de positionnement (l'ordre est significatif) :
+  <exécutable>             inclure les dépendances pour <executable>,
+  -e<exécutable>           (utiliser -e if <exécutable> commence par « - »)
+  -d<champ-dépendance>     le prochain exécutable positionne shlibs:<champ-dépendance>.Appuyez sur <Entrée> pour commencer le processus de signature
+Ce logiciel est un logiciel libre. Voyez la licence « GNU General Public License »
+dans la version 2 ou une version supérieure pour les conditions de copie. Il n'y a PAS de garantie.
+Utilisation : %s [<commande>]Utilisation : %s [<option>...]Syntaxe : %s [<option> ...] <rep-de-binaires> <fichier-d'override> [<préfixe-de-chemin>] >
+Packages
+
+Options :
+  -t, --type <type>     rechercher les paquets de <type> (« deb » par défaut).
+  -a, --arch <arch>     architecture à rechercher.
+  -h, --hash <liste-hachage>
+                        générer les hachages uniquement pour la liste spécifiée. 
+  -m, --multiversion    permettre plusieurs versions d'un même paquet.
+  -e, --extra-override <fichier>
+                        utiliser un fichier d'« override » supplémentaire.
+  -M, --medium <medium> ajouter le champ X-Medium pour la méthode d'accès
+                        multicd de dselect.
+  -?, --help            afficher ce message d'aide.
+      --version         afficher la version.
+Syntaxe : %s [<option>...] <rep-de-binaires> <fichier-d'override> [<chemin-à-préfixer>] >
+Sources
+
+Options :
+  -n, --no-sort          ne pas trier par paquet avant affichage
+  -e, --extra-override <fichier>
+                           utiliser un fichier supplémentaire d'override.
+  -s, --source-override <fichier>
+                         utiliser fichier pour d'autres annulations,
+                         par défaut c'est le fichier d'override normal
+                         qui est utilisé.
+      --debug            activer le débogage.
+  -?, --help             afficher ce message d'aide.
+      --version          afficher la version.
+Usage: %s [<option>...] <commande>Usage: %s [<option>...] <exécutable>|-e<exécutable> [<option>...]Utilisation : %s [<option>...] <fichier>...
+Syntaxe : %s [<option>...] <fichier> <section> <priorité>
+
+Options :
+  -f <fichier_des_fichiers>    lister les fichiers dans ce fichier plutôt
+                                 que debian/files.
+  -?, --help                   afficher ce message d'aide.
+      --version                afficher la version.
+Syntaxe : %s [<option>...] <ancien> <nouveau-a> <nouveau-b> [<sortie>]
+
+Options :
+  -m, --merge-prereleases  fusionner les versions préliminaires en
+                           ignorant ce qui suit le dernier caractère
+                           « ~ » dans la version.
+  -?, --help, -?           afficher ce message d'aide.
+      --version            afficher la version.
+Usage: %s [<option>...] [<commande>]Utilisation : %s [<option>...] <fichier de contrôle>Utilisez --help pour de l'information sur l'utilisation du programme.Le numéro de version indique des modifications provenant d'Ubuntu mais le champ « Maintainer: » ne comporte pas d'adresse UbuntuLe numéro de version indique des modifications provenant d'Ubuntu mais il n'existe pas de champ « XSBC-Original-Maintainer: »%s entrées écrites dans le fichier Packages.abandon suite à --abort-on-upstream-changesabandon suite à des modifications amont inattendues, voir %sajoutez %s dans debian/source/include-binaries si vous souhaitez conserver le binaire modifié dans le ficher tar debianajout de %s à %srépertoire d'administration %s n'existe pasUne union de dépendances ne peut pas contenir de simple dépendancesmise en place de %sarchitecture %s seulement autorisée toute seule (la liste pour le paquet %s est « %s »)architecture supposée '%s' pour '%s'section « %s » supposée pour « %s »valeur binary-only incorrecte : %smauvais format de nom de fichier de changementsmauvaise clé-valeur après « ; » : %sfichier substvars %s : ligne %d mal forméeinformations de contrôle incorrectes pour « %s »ligne d'en-tête mal forméeligne de fin mal forméevaleur urgency mal formée : %sligne %d mal formée dans le fichier de liste des fichiersles binaires à analyser devraient déjà être présents dans le répertoire de leur paquetenvoi d'un binaire et du fichier de différences (aucune inclusion du code source d'origine)construction de binaires sans binaires trouvés ; impossible d'envoyerfichier de contrôle binaire %scontenu d'un fichier binaire modifiéenvoi de binaires indépendants de l'architecture (le code source et les paquets dépendants d'une architecture ne sont pas inclus).envoi de binaires dépendants de l'architecture (le code source et les paquets indépendants de l'architecture ne sont pas inclus).envoi des binaires seulement (le code source n'est pas inclus)envoi d'un binaire seulement (aucune inclusion de code source)périphérique blocle bloc ne comporte pas de champ « %s »dépendances de construction et conflits non satisfaits ; échec.construction de %s dans %sconstruction de %s en utilisant le %s existantcréation d'un paquet source sans le nettoyer préalablement comme demandé ; il peut contenir des fichiers non souhaitésconstruction des sources pour une publication binaire seulejonction (bundling) : %sétat de sortie non nul pour bzrimpossible de construire avec le format source « %s » : %simpossible de lire le lien symbolique %simpossible d'extraire le nom et la version du nom de la bibliothèque « %s »impossible d'analyser la dépendance %slecture du répertoire %s impossible : %simpossible de modifier la date de %simpossible de fermer %simpossible de combiner %s et %simpossible de continuer à causer de l'erreur ci-dessusImpossible de continuer à cause des erreurs ci-dessusimpossible de créer le répertoire %simpossible de créer le répertoire « %s »impossible de trouver %simpossible de trouver un éditeurfork impossible pour %sfstat impossible pour le fichier %simpossible d'installer le nouveau fichier de contrôle en sortie %simpossible de rendre %s exécutableimpossible de fusionner les symboles depuis des objets sans SONAMEimpossible de créer le répertoire %simpossible de déplacer « %s » vers un fichier existantimpossible d'ouvrir %simpossible d'ouvrir le fichier %simpossible d'ouvrir le répertoire %simpossible de lire %simpossible de lire le lien %simpossible de lire la date de %simpossible d'enregistrer les changements dans %s, le fichier de différence existe déjà impossible de supprimer %simpossible d'identifier les changements de %s :impossible d'identifier les changements de %s : %sstat de %s impossible« stat » du répertoire %s impossiblestat du répertoire %s impossible (avant suppression)stat impossible pour le fichier %s« stat » du paramètre origine %s impossibleimpossible de décompresser le paquet source au format bzr car la commande bzr n'est pas dans PATHimpossible de décompresser le paquet source au format git car la commande git n'est pas dans PATHimpossible d'écrire %scaractère « %s » non autorisépériphérique caractèrechdir vers %scheck-command « %s » non trouvéprocessus filsclonage de %sécriture sur la sortie de tarsommes de contrôle en conflit : « %s » et « %s » pour le fichier « %s »conflit de taille de fichiers %u et %u pour le fichier %sla ligne continuée n'est pas dans le champinformation de contrôle d'un paquet .debinformation de contrôlecopie du répertoire debianimpossible de fermer la sortie standardimpossible d'analyser les informations de contrôle de %simpossible d'analyser l'enregistrement d'allocation dynamique : %simpossible d'analyser la définition de symboles dynamique : %srépertoire « %s » créécréation d'un clone de surface (« shallow clone ») avec la profondeur %sdebian/rules n'est pas exécutable ; corrigé.le type par défaut du système GNU %s pour l'architecture Debian %s ne correspond pas au type du système GNU indiqué %s%d fichier binaire non souhaité a été détecté (il est nécessaire de l'ajouter dans debian/source/include-binaries pour autoriser son inclusion).%d fichiers binaires non souhaités ont été détectés (il est nécessaire de les ajouter dans debian/source/include-binaries pour autoriser leur inclusion).périphérique ou socket non autoriséle fichier de différences %s modifie le fichier %s via un lien symbolique : %sdiff %s modifie un fichier dont le nom est encodé avec une chaîne de type Cle fichier de différences %s supprime un fichier %s qui n'existe pas (ligne %d)le fichier de différences « %s » ne contient pas de changementdiff « %s » se termine au milieu de ---/+++ (ligne %d)diff « %s » modifie un fichier dont le nom de termine par .dpkg-origdiff « %s » modifie un objet qui n'est pas un fichier textediff sur %srépertoireparamètre répertoire %s n'est pas un répertoiredétournements en jeu, la sortie peut être incorrectene contient pas de dépôt bzrne contient pas de dépôt gitdpkg-genchangeschamp %s en doublefichiers mentionnés deux fois dans le paquet source %s : %sentrée en double dans le fichier de liste des fichiers pour le fichier %s (ligne %d)entrée dans le fichier d'état de dpkgentrée dans le fichier %s de dépôtla partie d'ère (« epoch ») du numéro de version n'est pas un nombre : « %s »erreurle mode exécutable %04o de « %s » ne sera pas représenté dans le fichier de différences%s attendu, %s reçusignature OpenPGP attendue, mais fin de fichier atteinte (après ligne blanche)signature OpenPGP attendue, mais « %s » trouvé[ +-] attendu au début de la ligne %d du fichier de différences « %s »dans la ligne %d du fichier de différences « %s », « ^--- » attendu^@@ attendu ligne %d du fichier de différences « %s »extraction de %s dans %sextraction d'un paquet source non signé (%s)impossible de copier %s en %simpossible d'obtenir un verrouillage en écriture sur %simpossible d'analyser une ligne dans %s : %simpossible d'analyser une ligne dans %s : %simpossible de renommer le fichier extrait %s en %simpossible de renommer le fichier sauvegardé %s en %simpossible de vérifier la signature sur %séchec d'écritureéchec de l'écriture sur la sortie standardfakeroot non trouvé, veuillez soit installer le paquet fakeroot,
+soit indiquer une commande avec l'option -r ou exécuter cette
+commande en tant qu'administrateurerreur fatale rencontrée lors de l'analyse de %sle champ ne peut débuter par un trait d'unionla somme de contrôle du fichier %s est %s au lieu de %s (algorithme %s)fichier %s sans caractère nouvelle ligne terminal (soit l'original soit la version modifiée)la taille du fichier %s est %u au lieu de %u attendules paramètres du fichier ont besoin d'existersuppression de fichier sans nom approprié dans diff « %s » (ligne %d)fichier, section et priorité ne peuvent contenir d'espacele premier bloc ne comporte pas de champ Sourcepremier en-têtele format v3.0 (git) attend %sfichier inconnu pour le format v3.0 (git) : %sle format v3.0 (git) n'utilise qu'un fichier .gitle format v3.0 (git) n'utilise qu'un fichier .gitshallowligne blanche trouvée, %s attenduchangements trouvés, %s attendufin de fichier trouvée, %s attendudébut d'une entrée trouvé, %s attenduligne de fin trouvée, %s attenduenvoi complet (inclusion du code source d'origine)envoi complet ; paquet Debian natif (inclusion du code source complet)commande pour obtenir les privilèges administrateur « %s » non trouvéesection générale dans le fichier infoétat de sortie non nul de git ls-filesle dépôt git %s utilise des sous-modules ; cela n'est actuellement pas géréarchitecture hôtesi le correctif « %s » est correctement appliqué par quilt, utiliser « %s » pour le mettre à jouroption -sd ignorée pour les paquets Debian pure souchesuppression du répertoire %s ignoréesuppression du fichier %s ignorée, utilisez --include-removal pour la prendre en comptesuppression du lien symbolique %s ignoréeentrée en double %s ignorée, ligne %dentrée en double %s ignorée dans le fichier d'override pour les sources, ligne %dentrée en double %s ignorée, priorité %s non valablenom de paquet « %s » non autorisé : %sinclusion du code source original dans l'envoi (« upload »)valeur incorrecte dans l'option %s de la variable %s : %sinfoinstallation du nouveau fichier de liste des fichiersinstallation du nouveau fichier varlist %sUne dépendance non valable a été créée : %snom de fichier %s non valabledrapeau non valable dans %s : %sligne non valable dans la chaîne de somme de contrôle %s : %sentrée invalide, ligne %d (champs %d)entrée non valable dans le fichier d'override pour les sources, ligne %d (champs %d)erreur de syntaxe pour l'option %s à la ligne %dla ligne %d de %s n'est pas valable et a été ignoréeLa ligne %d de %s comprend un drapeau %s inconnuligne après --- n'est pas comme attendu dans diff « %s » (ligne %d)ligne de format inconnu, format différent de « champ-deux points-valeur »modifications locales détectées, les fichiers modifiés sont :les modifications locales ont été enregistrées dans un nouveau patch: %sne peut pas être une chaîne videcomplément orig.tar %s incompatible avec la signature %s dans le paquet sourcefichier orig.tar %s incompatible avec la signature %s dans le paquet sourcele champ « Priority » du paquet binaire %s manque ; utilisation de « - »il manque la priorité des fichiers sourcela section du paquet binaire %s manque ; utilisation de « - »il manque la section des fichiers sourcecomplément orig.tar manquant pour la signature %s dans le paquet sourcenom de fichier de changements manquantchamp de contrôle vital manquant, %sla commande du point d'ancrage %s est manquanteil manque l'information pour l'important champ de sortie %sinformation manquante pour le champ de sortie %sfichier orig.tar ou debian.tar manquant dans un paquet source v2.0impossible d'utiliser mkdir pour créer le répertoiredonnées de modifications supplémentaires ou de findéplacement de « %s » en « %s »plusieurs fichiers tar dans un paquet source v1.0il faut indiquer un paquet car le fichier de contrôle contient plusieurs (%s)doit commencer par un caractère alphanumériquetube nommé« socket » nomméla version du paquet natif ne peut avoir de numéro de révisionpaquet natif avec .orig.taroption d'action indispensableau moins un nom de fichier est nécessaireau moins un exécutable est nécessaireIl est demandé exactement un fichier, une section et une prioritédemande au moins trois paramètresnouvelles bibliothèques apparues dans le fichier des symboles : %sle fichier vide « %s », nouvellement créé, ne sera pas représenté dans le fichier de différencesen-tête suivant ou fin de fichierpas de champ Package trouvé dans « %s », paquet ignorépas de champ Package dans le fichier de contrôle de %spas de paquet binaire indiqué dans %spas de fichier debian/symbols utilisé comme base pour générer %spas d'information de dépendance trouvée pour %s (utilisé par %s)
+Indication: vérifiez que la bibliothèque provienne bien d'un paquet.pas de fichiers indiqués à la ligne de commandeaucune instance de paquet n'a été trouvée dans les informations de contrôleaucun format source indiqué dans %s, voir dpkg-source(1)répertoire  « %s » inexistant, essayez l'option --create-dir (-c)pas de fichier tar dans le champ Filespas de tarball de sources amont à %sla version du paquet non natif ne contient pas de numéro de révisionaucune trouvée, démarrage depuis la dernière entréeaucun des fichiers indiqués par « ---/+++ » n'est valable dans le fichier de différences « %s » (ligne %d)inexistantpas d'inclusion du code source original dans l'envoi (« upload »)construction non-publiée (UNRELEASED) non signée ; veuillez utiliser --force-sign pour passer outrede un à trois paramètres sont attendusne gère que la compression gziple paramètre source %s n'est pas un fichier ou un répertoirele paramètre source est vide (pas d'orig, pas de diff) mais l'option -s%s attend quelque chose.le paramètre source est compressé mais l'option -s%s demande des sources non compressées (.orig/)le paramètre source n'est pas compressé mais l'option -s%s demande des sources compressées (.orig.tar.<ext>)le répertoire orig « %s » existe déjà, pas de modification, abandon ; utiliser -sA, -sK ou -sP pour forcer.les fichiers originaux et modifiés sont /dev/null dans le fichier de différences %s (ligne %d)fichier override %s non trouvéle paquet %s (nom %s) a un champ Filename !le paquet %s (nom %s) est répété, mais la version est plus récente ; cette dernière sera utilisée et les données de %s seront ignorées !le paquet %s (nom %s) est répété ; celui-ci a été ignoré et les données de %s ont été utilisées !le paquet %s a une priorité %s dans le fichier de contrôle mais une priorité %s dans le fichier de liste des fichiersle paquet %s a une section %s dans le fichier de contrôle mais une section %s dans le fichier de liste des fichierspaquet %s dans le fichier de contrôle mais pas dans le fichier de liste des fichierspaquet %s listé dans le fichier de liste des fichiers mais pas dans le fichier infole paquet %s n'est pas dans le fichier de contrôlepaquet %s : la dépendance pourrait être évitée si « %s » n'y était pas lié avec %s sans nécessité (il n'utilise aucun des symboles de la bibliothèque)la dépendance pourrait être évitée si « %s » n'y étaient pas lié avec %s sans nécessité (ils n'utilisent aucun des symboles de la bibliothèque).section du paquet dans le fichier infole fichier original compressé %s existe mais ce n'est pas un fichier texteanalyse du fichier changesversion analysée de changelogle fichier de correctifs « %s » n'existe pasles correctifs n'ont pas été appliqués, ils vont l'être maintenantle motif « %s » ne correspond à aucun fichierpipe pour %sfichier textesuppression du fichier de différences de sauvegarde %sréouverture stdinréouverture de la sortie standardclé-valeur répété %ssuppression indispensable de « %s » installé par l'archive tar originalerestauration des fichiers de sauvegarde de quilt pour %srm -rf n'a pas supprimé « %s »Veuillez consulter le fichier de différences ci-dessousconfiguration du clone de surfaceplusieurs fichiers orig.tar ont été trouvés (%s et %s) mais un seul est autoriséfichier info sur les bibliothèques partagées « %s », ligne %d : ligne mal formée « %s »option courte non autorisée dans %s à la ligne %dsign-command « %s » non trouvée« %s » ignorécertaines bibliothèques ont disparu du fichier des symboles : %scertains nouveaux symboles sont apparus dans le fichier des symboles : %scertains symboles ou motifs ont disparu du fichier des symboles : %ssource changé parrépertoire source « %s » n'est pas <paquet_source>-<version_amont> « %s »le répertoire source n'est pas le sommet d'un dépôt bzr (%s/.bzr absent) bien que le format bzr ait été indiquéle répertoire source n'est pas le sommet d'un dépôt git (%s/.git absent) bien que le format git ait été indiquédistribution sourcegestion des sources avec -s%s non autorisée avec -bgestion des sources avec -s%s non autorisée avec -xpaquet sourcele format de paquet source « %s » n'est pas géré : %sle paquet source a deux valeurs en conflit : %s et %sle nom du paquet source « %s » n'est pas autorisé : %sversion sourceenvoi du source seulement (inclusion du code source d'origine)envoi de source uniquement : paquet Debian natifsource uniquement, envoi du fichier de différences uniquement (aucune inclusion du code source d'origine)le mode spécial %04o de « %s » ne sera pas représenté dans le fichier de différencesdébut des données de modificationssymbole %s utilisé par %s non trouvé dans les bibliothèquesles informations de symboles doivent être précédées par un en-tête (fichier %s, ligne %s)nom de symbole non précisé : %slien symbolique vers %serreur de syntaxe dans %s à la ligne %d : %sne prend pas de paramètre sans optionle fichier tar « %s » existe déjà, pas de modification, abandon ; utiliser -sU ou -sR pour forcer.La version actuelle (%s) est inférieure à la version précédente (%s)le fichier de différences modifie les fichiers amont suivants : %sle fichier des symboles généré est videl'en-tête ne correspond pas à l'expression régulière attenduele patch ne s'applique pas proprement (« fuzz »), ou est mal-forméle fichier « series » (%s) contient des options non gérées (« %s », ligne %s) ; dpkg-source pourrait échouer dans l'application des correctifsla partie finale (« trailer ») ne correspond pas à l'expression régulière attendueaucune modification locale à enregistrertrop de substitutions - mode récursif ? - dans « %s »tentative de fusion du même objet (%s) deux fois dans un fichier de symbolesdeux commandes indiquées : --%s et --%simpossible de modifier les permissions de « %s »impossible de changer de répertoire vers « %s »impossible de vérifier l'existence de « %s »impossible de vérifier l'existence du répertoire orig « %s »impossible de vérifier la suppression du répertoire « %s »impossible de déterminer %simpossible d'exécuter %simpossible de garder le répertoire orig, il existe déjàimpossible d'ouvrir le fichier d'info sur les bibliothèques partagées %simpossible de renommer %s en %simpossible de renommer « %s » (nouvellement créé) en « %s »impossible de renommer « %s » en « %s »stat impossible du supposé orig non compressé « %s »retrait de %snon « commité », modifications non ignorées dans le répertoire de travail : %sannulation inconditionnelle du responsable pour %sfin inattendue de diff « %s »signature OpenPGP non terminéesubstitution %% inconnue dans le point d'ancrage: %%%sfonctionnalité %s inconnue dans la variable %s : %sarchitecture Debian inconnue %s, vous devez aussi indiquer le type du système GNU type du système GNU inconnu %s, vous devez aussi indiquer l'architecture Debian type du système GNU par défaut inconnu pour l'architecture Debian %stype de fichier inconnunom de crochet inconnu %sarchitecture hôte « %s » inconnuechamp d'information inconnu « %s » dans les données d'entrée de %sclé clé-valeur inconnue %sligne inconnue dans diff -u sur %s : « %s »option inconnue « %s »option ou paramètre inconnu %sformat de sortie %s inconnurésultat de dpkg --search inconnu : %scible non compressée existe : %sle fichier original non compressé « %s » existe mais ce n'est pas un répertoireextraction de %schamp de dépendance non reconnu « %s »type de fichier non reconnu pour un fichier source %s : %sfichier non reconnu pour un paquet source natif : %sligne non reconnuemodifications non représentables des sourcessomme de contrôle non supportée « %s »version inconnue des métadonnées de quilt : %sfichier binaire non souhaité : %sfichiers amont modifiés : %sutiliser l'entrée la plus récente qui est inférieure à celle indiquéeutiliser l'entrée la plus ancienne qui est supérieure à celle indiquéechoisissez le format « 3.0 (quilt) » pour utiliser des modifications séparées et documentées dans les sources amont, voir dpkg-source(1)utilisation d'une commande pour obtenir les privilèges administrateur en tant qu'administrateurutilisation des options depuis %s : %sutilisation du format source « %s »le fabriquant %s n'existe pas dans %sfichier du fournisseur (« vendor »)la version « %s » n'est pas valable : %sle numéro de version ne peut pas être videle numéro de version contient un caractère « %s » non autoriséle numéro de version ne commence par par un chiffreattente de %savertissementinfo sur le détournement envoyée sur stderrerreur d'écriture sur des données de contrôleécriture sur l'entrée de tarvous pouvez intégrer les modifications locales avec %simpossible d'indiquer « from » et « since » simultanément. « since » sera utiliséimpossible d'indiquer « to » et « until » simultanément. « until » sera utiliséimpossible de combiner « count » et « offset » avec une autre option de limitationimpossible d'utiliser l'étiquette symver pour identifier les symboles non versionnés : %s
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/insert-header.sin dpkg-1.20.7.1/scripts/po/insert-header.sin
--- dpkg-1.20.7.1-orig/scripts/po/insert-header.sin	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/insert-header.sin	2021-06-09 18:22:47.474275400 -0500
@@ -0,0 +1,28 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# Copyright (C) 2001 Free Software Foundation, Inc.
+# Written by Bruno Haible <bruno@clisp.org>, 2001.
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to use, copy, distribute, and modify it.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/Makefile dpkg-1.20.7.1/scripts/po/Makefile
--- dpkg-1.20.7.1-orig/scripts/po/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/Makefile	2021-06-09 18:24:52.122468577 -0500
@@ -0,0 +1,737 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 2000-2019 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# Origin: gettext-0.20
+GETTEXT_MACRO_VERSION = 0.20
+
+PACKAGE = dpkg
+VERSION = 1.20.7.1
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+
+SED = /bin/sed
+SHELL = /bin/sh
+
+
+srcdir = .
+top_srcdir = ../..
+
+
+prefix = /usr
+exec_prefix = ${prefix}
+datarootdir = ${prefix}/share
+datadir = ${datarootdir}
+localedir = ${datarootdir}/locale
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh does not start with $(SHELL), so we add it.
+# In automake >= 1.10, $(MKDIR_P) is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh -d
+install_sh = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+MKDIR_P = /bin/mkdir -p
+mkdir_p = $(MKDIR_P)
+
+# When building gettext-tools, we prefer to use the built programs
+# rather than installed programs.  However, we can't do that when we
+# are cross compiling.
+CROSS_COMPILING = @CROSS_COMPILING@
+
+GMSGFMT_ = /usr/bin/msgfmt
+GMSGFMT_no = /usr/bin/msgfmt
+GMSGFMT_yes = /usr/bin/msgfmt
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = /usr/bin/xgettext
+XGETTEXT_no = /usr/bin/xgettext
+XGETTEXT_yes = /usr/bin/xgettext
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_UPDATE = /usr/bin/msgmerge --update
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES =  ca.po de.po es.po fr.po pl.po ru.po sv.po
+GMOFILES =  ca.gmo de.gmo es.gmo fr.gmo pl.gmo ru.gmo sv.gmo
+UPDATEPOFILES =  ca.po-update de.po-update es.po-update fr.po-update pl.po-update ru.po-update sv.po-update
+DUMMYPOFILES =  ca.nop de.nop es.nop fr.nop pl.nop ru.nop sv.nop
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+     ../../scripts/dpkg-architecture.pl \
+     ../../scripts/dpkg-buildflags.pl \
+     ../../scripts/dpkg-buildpackage.pl \
+     ../../scripts/dpkg-checkbuilddeps.pl \
+     ../../scripts/dpkg-distaddfile.pl \
+     ../../scripts/dpkg-genbuildinfo.pl \
+     ../../scripts/dpkg-genchanges.pl \
+     ../../scripts/dpkg-gencontrol.pl \
+     ../../scripts/dpkg-gensymbols.pl \
+     ../../scripts/dpkg-mergechangelogs.pl \
+     ../../scripts/dpkg-name.pl \
+     ../../scripts/dpkg-parsechangelog.pl \
+     ../../scripts/dpkg-scanpackages.pl \
+     ../../scripts/dpkg-scansources.pl \
+     ../../scripts/dpkg-shlibdeps.pl \
+     ../../scripts/dpkg-source.pl \
+     ../../scripts/dpkg-vendor.pl \
+     ../../scripts/Dpkg.pm \
+     ../../scripts/Dpkg/Arch.pm \
+     ../../scripts/Dpkg/BuildFlags.pm \
+     ../../scripts/Dpkg/BuildOptions.pm \
+     ../../scripts/Dpkg/BuildProfiles.pm \
+     ../../scripts/Dpkg/Build/Env.pm \
+     ../../scripts/Dpkg/Build/Info.pm \
+     ../../scripts/Dpkg/Build/Types.pm \
+     ../../scripts/Dpkg/Changelog.pm \
+     ../../scripts/Dpkg/Changelog/Debian.pm \
+     ../../scripts/Dpkg/Changelog/Entry.pm \
+     ../../scripts/Dpkg/Changelog/Entry/Debian.pm \
+     ../../scripts/Dpkg/Changelog/Parse.pm \
+     ../../scripts/Dpkg/Checksums.pm \
+     ../../scripts/Dpkg/Compression.pm \
+     ../../scripts/Dpkg/Compression/FileHandle.pm \
+     ../../scripts/Dpkg/Compression/Process.pm \
+     ../../scripts/Dpkg/Conf.pm \
+     ../../scripts/Dpkg/Control.pm \
+     ../../scripts/Dpkg/Control/Changelog.pm \
+     ../../scripts/Dpkg/Control/Fields.pm \
+     ../../scripts/Dpkg/Control/FieldsCore.pm \
+     ../../scripts/Dpkg/Control/Hash.pm \
+     ../../scripts/Dpkg/Control/HashCore.pm \
+     ../../scripts/Dpkg/Control/Info.pm \
+     ../../scripts/Dpkg/Control/Tests.pm \
+     ../../scripts/Dpkg/Control/Tests/Entry.pm \
+     ../../scripts/Dpkg/Control/Types.pm \
+     ../../scripts/Dpkg/Deps.pm \
+     ../../scripts/Dpkg/Deps/AND.pm \
+     ../../scripts/Dpkg/Deps/KnownFacts.pm \
+     ../../scripts/Dpkg/Deps/Multiple.pm \
+     ../../scripts/Dpkg/Deps/OR.pm \
+     ../../scripts/Dpkg/Deps/Simple.pm \
+     ../../scripts/Dpkg/Deps/Union.pm \
+     ../../scripts/Dpkg/Dist/Files.pm \
+     ../../scripts/Dpkg/ErrorHandling.pm \
+     ../../scripts/Dpkg/Exit.pm \
+     ../../scripts/Dpkg/File.pm \
+     ../../scripts/Dpkg/Getopt.pm \
+     ../../scripts/Dpkg/Gettext.pm \
+     ../../scripts/Dpkg/IPC.pm \
+     ../../scripts/Dpkg/Index.pm \
+     ../../scripts/Dpkg/Interface/Storable.pm \
+     ../../scripts/Dpkg/Lock.pm \
+     ../../scripts/Dpkg/OpenPGP.pm \
+     ../../scripts/Dpkg/Package.pm \
+     ../../scripts/Dpkg/Path.pm \
+     ../../scripts/Dpkg/Shlibs.pm \
+     ../../scripts/Dpkg/Shlibs/Cppfilt.pm \
+     ../../scripts/Dpkg/Shlibs/Objdump.pm \
+     ../../scripts/Dpkg/Shlibs/Symbol.pm \
+     ../../scripts/Dpkg/Shlibs/SymbolFile.pm \
+     ../../scripts/Dpkg/Source/Archive.pm \
+     ../../scripts/Dpkg/Source/Functions.pm \
+     ../../scripts/Dpkg/Source/BinaryFiles.pm \
+     ../../scripts/Dpkg/Source/Package.pm \
+     ../../scripts/Dpkg/Source/Package/V1.pm \
+     ../../scripts/Dpkg/Source/Package/V2.pm \
+     ../../scripts/Dpkg/Source/Package/V3/Bzr.pm \
+     ../../scripts/Dpkg/Source/Package/V3/Custom.pm \
+     ../../scripts/Dpkg/Source/Package/V3/Git.pm \
+     ../../scripts/Dpkg/Source/Package/V3/Native.pm \
+     ../../scripts/Dpkg/Source/Package/V3/Quilt.pm \
+     ../../scripts/Dpkg/Source/Patch.pm \
+     ../../scripts/Dpkg/Source/Quilt.pm \
+     ../../scripts/Dpkg/Substvars.pm \
+     ../../scripts/Dpkg/Vars.pm \
+     ../../scripts/Dpkg/Vendor.pm \
+     ../../scripts/Dpkg/Vendor/Debian.pm \
+     ../../scripts/Dpkg/Vendor/Default.pm \
+     ../../scripts/Dpkg/Vendor/Ubuntu.pm \
+     ../../scripts/Dpkg/Version.pm
+
+CATALOGS =  ca.gmo de.gmo es.gmo fr.gmo pl.gmo ru.gmo sv.gmo
+
+POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
+POFILESDEPS_yes = $(POFILESDEPS_)
+POFILESDEPS_no =
+POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
+
+DISTFILESDEPS_ = update-po
+DISTFILESDEPS_yes = $(DISTFILESDEPS_)
+DISTFILESDEPS_no =
+DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+# Makevars gets inserted here. (Don't remove this line!)
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = dpkg-dev
+
+# These two variables depend on the location of this directory.
+subdir = scripts/po
+top_builddir = ../..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --from-code=UTF-8 --add-location=file \
+                   --keyword --keyword=g_ --keyword=N_ \
+                   --keyword=P_:1,2 --keyword=C_:1c,2
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
+# package.  (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.)  Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright.  The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Dpkg Developers
+
+# This tells whether or not to prepend "GNU " prefix to the package
+# name that gets inserted into the header of the $(DOMAIN).pot file.
+# Possible values are "yes", "no", or empty.  If it is empty, try to
+# detect it automatically by scanning the files in $(top_srcdir) for
+# "GNU packagename" string.
+PACKAGE_GNU = no
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+#   in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+#   understood.
+# - Strings which make invalid assumptions about notation of date, time or
+#   money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS = $(PACKAGE_BUGREPORT)
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used.  It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
+
+# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
+# context.  Possible values are "yes" and "no".  Set this to yes if the
+# package uses functions taking also a message context, like pgettext(), or
+# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
+USE_MSGCTXT = yes
+
+# These options get passed to msgmerge.
+# Useful options are in particular:
+#   --previous            to keep previous msgids of translated messages,
+#   --quiet               to reduce the verbosity.
+MSGMERGE_OPTIONS = --previous --add-location=file --quiet
+
+# These options get passed to msginit.
+# If you want to disable line wrapping when writing PO files, add
+# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and
+# MSGINIT_OPTIONS.
+MSGINIT_OPTIONS =
+
+# This tells whether or not to regenerate a PO file when $(DOMAIN).pot
+# has changed.  Possible values are "yes" and "no".  Set this to no if
+# the POT file is checked in the repository and the version control
+# program ignores timestamps.
+PO_DEPENDS_ON_POT = yes
+
+# This tells whether or not to forcibly update $(DOMAIN).pot and
+# regenerate PO files on "make dist".  Possible values are "yes" and
+# "no".  Set this to no if the POT file and PO files are maintained
+# externally.
+DIST_DEPENDS_ON_UPDATE_PO = yes
+
+DISTFILES.extra1 = ChangeLog.old
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update
+
+# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
+# The GNU Coding Standards say in
+# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
+#   "GNU distributions usually contain some files which are not source files
+#    ... . Since these files normally appear in the source directory, they
+#    should always appear in the source directory, not in the build directory.
+#    So Makefile rules to update them should put the updated files in the
+#    source directory."
+# Therefore we put these files in the source directory, not the build directory.
+
+# During .po -> .gmo conversion, take into account the most recent changes to
+# the .pot file. This eliminates the need to update the .po files when the
+# .pot file has changed, which would be troublesome if the .po files are put
+# under version control.
+.po.gmo: $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
+	cd $(srcdir) && \
+	rm -f $${lang}.gmo && \
+	$(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
+	$(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
+	mv t-$${lang}.gmo $${lang}.gmo && \
+	rm -f $${lang}.1po
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: all-yes
+
+all-yes: $(srcdir)/stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+	test "$(GETTEXT_MACRO_VERSION)" = "0.20" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.20" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).
+
+# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
+# have been loosely updated. Its purpose is that when a developer or translator
+# checks out the package from a version control system, and the $(DOMAIN).pot
+# file is not under version control, "make" will update the $(DOMAIN).pot and
+# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
+# timestamp would not be necessary if updating the $(CATALOGS) would always
+# touch them; however, the rule for $(POFILES) has been designed to not touch
+# files that don't need to be changed.
+$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
+	@$(CHECK_MACRO_VERSION)
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch $(srcdir)/stamp-po" && \
+	  echo timestamp > $(srcdir)/stamp-poT && \
+	  mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
+	}
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	package_gnu="$(PACKAGE_GNU)"; \
+	test -n "$$package_gnu" || { \
+	  if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+	         LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU dpkg' /dev/null '{}' ';' 2>/dev/null; \
+	       else \
+	         LC_ALL=C grep -i 'GNU dpkg' $(top_srcdir)/* 2>/dev/null; \
+	       fi; \
+	     } | grep -v 'libtool:' >/dev/null; then \
+	     package_gnu=yes; \
+	   else \
+	     package_gnu=no; \
+	   fi; \
+	}; \
+	if test "$$package_gnu" = "yes"; then \
+	  package_prefix='GNU '; \
+	else \
+	  package_prefix=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_prefix}dpkg" \
+	      --package-version='1.20.7.1' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	esac
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot-header; then \
+	    sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
+	    cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
+	    rm -f $(DOMAIN).1po \
+	    || exit 1; \
+	  fi; \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(POFILESDEPS)
+	@test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           0.1[6-7] | 0.1[6-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+install-dvi install-ps install-pdf install-html:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f $(srcdir)/stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(srcdir)/stamp-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir) || exit 1; \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       0.1[6-7] | 0.1[6-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use /bin/sh, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status POTFILES.in LINGUAS
+	cd $(top_builddir) \
+	  && /bin/sh ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
+# Special Makefile rules for English message catalogs with quotation marks.
+#
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+# This file, Rules-quot, and its auxiliary files (listed under
+# DISTFILES.common.extra1) are free software; the Free Software Foundation
+# gives unlimited permission to use, copy, distribute, and modify them.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+	$(MAKE) en@quot.po-update
+en@boldquot.po-create:
+	$(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	ll=`echo $$lang | sed -e 's/@.*//'`; \
+	LC_ALL=C; export LC_ALL; \
+	cd $(srcdir); \
+	if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \
+	   | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \
+	   { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	     '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \
+	       $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \
+	       ;; \
+	     *) \
+	       $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \
+	       ;; \
+	     esac } 2>/dev/null > $$tmpdir/$$lang.new.po \
+	     ; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "creation of $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+en@quot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+	rm -f *.insert-header
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/Makefile.in dpkg-1.20.7.1/scripts/po/Makefile.in
--- dpkg-1.20.7.1-orig/scripts/po/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/Makefile.in	2021-06-09 18:24:51.997468386 -0500
@@ -0,0 +1,503 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 2000-2019 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# Origin: gettext-0.20
+GETTEXT_MACRO_VERSION = 0.20
+
+PACKAGE = dpkg
+VERSION = 1.20.7.1
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+
+SED = /bin/sed
+SHELL = /bin/sh
+
+
+srcdir = .
+top_srcdir = ../..
+
+
+prefix = /usr
+exec_prefix = ${prefix}
+datarootdir = ${prefix}/share
+datadir = ${datarootdir}
+localedir = ${datarootdir}/locale
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh does not start with $(SHELL), so we add it.
+# In automake >= 1.10, $(MKDIR_P) is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh -d
+install_sh = $(SHELL) ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+MKDIR_P = /bin/mkdir -p
+mkdir_p = $(MKDIR_P)
+
+# When building gettext-tools, we prefer to use the built programs
+# rather than installed programs.  However, we can't do that when we
+# are cross compiling.
+CROSS_COMPILING = @CROSS_COMPILING@
+
+GMSGFMT_ = /usr/bin/msgfmt
+GMSGFMT_no = /usr/bin/msgfmt
+GMSGFMT_yes = /usr/bin/msgfmt
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = /usr/bin/xgettext
+XGETTEXT_no = /usr/bin/xgettext
+XGETTEXT_yes = /usr/bin/xgettext
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_UPDATE = /usr/bin/msgmerge --update
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
+POFILESDEPS_yes = $(POFILESDEPS_)
+POFILESDEPS_no =
+POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
+
+DISTFILESDEPS_ = update-po
+DISTFILESDEPS_yes = $(DISTFILESDEPS_)
+DISTFILESDEPS_no =
+DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update
+
+# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
+# The GNU Coding Standards say in
+# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
+#   "GNU distributions usually contain some files which are not source files
+#    ... . Since these files normally appear in the source directory, they
+#    should always appear in the source directory, not in the build directory.
+#    So Makefile rules to update them should put the updated files in the
+#    source directory."
+# Therefore we put these files in the source directory, not the build directory.
+
+# During .po -> .gmo conversion, take into account the most recent changes to
+# the .pot file. This eliminates the need to update the .po files when the
+# .pot file has changed, which would be troublesome if the .po files are put
+# under version control.
+.po.gmo: $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
+	cd $(srcdir) && \
+	rm -f $${lang}.gmo && \
+	$(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
+	$(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
+	mv t-$${lang}.gmo $${lang}.gmo && \
+	rm -f $${lang}.1po
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: all-yes
+
+all-yes: $(srcdir)/stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+	test "$(GETTEXT_MACRO_VERSION)" = "0.20" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.20" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).
+
+# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
+# have been loosely updated. Its purpose is that when a developer or translator
+# checks out the package from a version control system, and the $(DOMAIN).pot
+# file is not under version control, "make" will update the $(DOMAIN).pot and
+# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
+# timestamp would not be necessary if updating the $(CATALOGS) would always
+# touch them; however, the rule for $(POFILES) has been designed to not touch
+# files that don't need to be changed.
+$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
+	@$(CHECK_MACRO_VERSION)
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch $(srcdir)/stamp-po" && \
+	  echo timestamp > $(srcdir)/stamp-poT && \
+	  mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
+	}
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	package_gnu="$(PACKAGE_GNU)"; \
+	test -n "$$package_gnu" || { \
+	  if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+	         LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU dpkg' /dev/null '{}' ';' 2>/dev/null; \
+	       else \
+	         LC_ALL=C grep -i 'GNU dpkg' $(top_srcdir)/* 2>/dev/null; \
+	       fi; \
+	     } | grep -v 'libtool:' >/dev/null; then \
+	     package_gnu=yes; \
+	   else \
+	     package_gnu=no; \
+	   fi; \
+	}; \
+	if test "$$package_gnu" = "yes"; then \
+	  package_prefix='GNU '; \
+	else \
+	  package_prefix=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_prefix}dpkg" \
+	      --package-version='1.20.7.1' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS)  \
+	    ;; \
+	esac
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot-header; then \
+	    sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
+	    cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
+	    rm -f $(DOMAIN).1po \
+	    || exit 1; \
+	  fi; \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(POFILESDEPS)
+	@test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           0.1[6-7] | 0.1[6-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-yes
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+install-dvi install-ps install-pdf install-html:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f $(srcdir)/stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(srcdir)/stamp-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir) || exit 1; \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       0.1[6-7] | 0.1[6-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use /bin/sh, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+	cd $(top_builddir) \
+	  && /bin/sh ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/Makefile.in.in dpkg-1.20.7.1/scripts/po/Makefile.in.in
--- dpkg-1.20.7.1-orig/scripts/po/Makefile.in.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/Makefile.in.in	2021-06-09 18:22:47.475275401 -0500
@@ -0,0 +1,503 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-2000 Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 2000-2019 Free Software Foundation, Inc.
+#
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# Origin: gettext-0.20
+GETTEXT_MACRO_VERSION = 0.20
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SED = @SED@
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @localedir@
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# @install_sh@ does not start with $(SHELL), so we add it.
+# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+mkdir_p = @mkdir_p@
+
+# When building gettext-tools, we prefer to use the built programs
+# rather than installed programs.  However, we can't do that when we
+# are cross compiling.
+CROSS_COMPILING = @CROSS_COMPILING@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = @MSGMERGE@
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+POFILESDEPS_ = $(srcdir)/$(DOMAIN).pot
+POFILESDEPS_yes = $(POFILESDEPS_)
+POFILESDEPS_no =
+POFILESDEPS = $(POFILESDEPS_$(PO_DEPENDS_ON_POT))
+
+DISTFILESDEPS_ = update-po
+DISTFILESDEPS_yes = $(DISTFILESDEPS_)
+DISTFILESDEPS_no =
+DISTFILESDEPS = $(DISTFILESDEPS_$(DIST_DEPENDS_ON_UPDATE_PO))
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .sed .sin .nop .po-create .po-update
+
+# The .pot file, stamp-po, .po files, and .gmo files appear in release tarballs.
+# The GNU Coding Standards say in
+# <https://www.gnu.org/prep/standards/html_node/Makefile-Basics.html>:
+#   "GNU distributions usually contain some files which are not source files
+#    ... . Since these files normally appear in the source directory, they
+#    should always appear in the source directory, not in the build directory.
+#    So Makefile rules to update them should put the updated files in the
+#    source directory."
+# Therefore we put these files in the source directory, not the build directory.
+
+# During .po -> .gmo conversion, take into account the most recent changes to
+# the .pot file. This eliminates the need to update the .po files when the
+# .pot file has changed, which would be troublesome if the .po files are put
+# under version control.
+.po.gmo: $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $* | sed -e 's,.*/,,'`; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.1po && rm -f $${lang}.1po"; \
+	cd $(srcdir) && \
+	rm -f $${lang}.gmo && \
+	$(MSGMERGE) $(MSGMERGE_FOR_MSGFMT_OPTION) -o $${lang}.1po $${lang}.po $(DOMAIN).pot && \
+	$(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.1po && \
+	mv t-$${lang}.gmo $${lang}.gmo && \
+	rm -f $${lang}.1po
+
+.sin.sed:
+	sed -e '/^#/d' $< > t-$@
+	mv t-$@ $@
+
+
+all: all-@USE_NLS@
+
+all-yes: $(srcdir)/stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+CHECK_MACRO_VERSION = \
+	test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, $(srcdir)/stamp-po is a nop (i.e. a phony target).
+
+# $(srcdir)/stamp-po is a timestamp denoting the last time at which the CATALOGS
+# have been loosely updated. Its purpose is that when a developer or translator
+# checks out the package from a version control system, and the $(DOMAIN).pot
+# file is not under version control, "make" will update the $(DOMAIN).pot and
+# the $(CATALOGS), but subsequent invocations of "make" will do nothing. This
+# timestamp would not be necessary if updating the $(CATALOGS) would always
+# touch them; however, the rule for $(POFILES) has been designed to not touch
+# files that don't need to be changed.
+$(srcdir)/stamp-po: $(srcdir)/$(DOMAIN).pot
+	@$(CHECK_MACRO_VERSION)
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch $(srcdir)/stamp-po" && \
+	  echo timestamp > $(srcdir)/stamp-poT && \
+	  mv $(srcdir)/stamp-poT $(srcdir)/stamp-po; \
+	}
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+# The determination of whether the package xyz is a GNU one is based on the
+# heuristic whether some file in the top level directory mentions "GNU xyz".
+# If GNU 'find' is available, we avoid grepping through monster files.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+	package_gnu="$(PACKAGE_GNU)"; \
+	test -n "$$package_gnu" || { \
+	  if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
+	         LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep -i 'GNU @PACKAGE@' /dev/null '{}' ';' 2>/dev/null; \
+	       else \
+	         LC_ALL=C grep -i 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null; \
+	       fi; \
+	     } | grep -v 'libtool:' >/dev/null; then \
+	     package_gnu=yes; \
+	   else \
+	     package_gnu=no; \
+	   fi; \
+	}; \
+	if test "$$package_gnu" = "yes"; then \
+	  package_prefix='GNU '; \
+	else \
+	  package_prefix=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_prefix}@PACKAGE@" \
+	      --package-version='@VERSION@' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	      $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	    ;; \
+	esac
+	test ! -f $(DOMAIN).po || { \
+	  if test -f $(srcdir)/$(DOMAIN).pot-header; then \
+	    sed -e '1,/^#$$/d' < $(DOMAIN).po > $(DOMAIN).1po && \
+	    cat $(srcdir)/$(DOMAIN).pot-header $(DOMAIN).1po > $(DOMAIN).po && \
+	    rm -f $(DOMAIN).1po \
+	    || exit 1; \
+	  fi; \
+	  if test -f $(srcdir)/$(DOMAIN).pot; then \
+	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+	    else \
+	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	    fi; \
+	  else \
+	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+	  fi; \
+	}
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+	$(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(POFILESDEPS)
+	@test -f $(srcdir)/$(DOMAIN).pot || $(MAKE) $(srcdir)/$(DOMAIN).pot
+	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           0.1[6-7] | 0.1[6-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --previous $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} --previous $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    $(INSTALL_DATA) $(srcdir)/$$file \
+			    $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	  for file in Makevars; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+install-data-no: all
+install-data-yes: all
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+	    fi; \
+	  done; \
+	done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+	else \
+	  : ; \
+	fi
+installdirs-data-no:
+installdirs-data-yes:
+	@catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  dir=$(localedir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
+	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+	    if test -n "$$lc"; then \
+	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+	         for file in *; do \
+	           if test -f $$file; then \
+	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+	           fi; \
+	         done); \
+	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+	      else \
+	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+	          :; \
+	        else \
+	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+	        fi; \
+	      fi; \
+	    fi; \
+	  done; \
+	done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  for file in $(DISTFILES.common) Makevars.template; do \
+	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+	  done; \
+	else \
+	  : ; \
+	fi
+uninstall-data-no:
+uninstall-data-yes:
+	catalogs='$(CATALOGS)'; \
+	for cat in $$catalogs; do \
+	  cat=`basename $$cat`; \
+	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+	  done; \
+	done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+install-dvi install-ps install-pdf install-html:
+
+mostlyclean:
+	rm -f remove-potcdate.sed
+	rm -f $(srcdir)/stamp-poT
+	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+	rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f $(srcdir)/$(DOMAIN).pot $(srcdir)/stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+	test -z "$(DISTFILESDEPS)" || $(MAKE) $(DISTFILESDEPS)
+	@$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(srcdir)/stamp-po $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	if test "$(PACKAGE)" = "gettext-tools"; then \
+	  dists="$$dists Makevars.template"; \
+	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
+	if test -f $(srcdir)/ChangeLog; then \
+	  dists="$$dists ChangeLog"; \
+	fi; \
+	for i in 0 1 2 3 4 5 6 7 8 9; do \
+	  if test -f $(srcdir)/ChangeLog.$$i; then \
+	    dists="$$dists ChangeLog.$$i"; \
+	  fi; \
+	done; \
+	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+	for file in $$dists; do \
+	  if test -f $$file; then \
+	    cp -p $$file $(distdir) || exit 1; \
+	  else \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+	  fi; \
+	done
+
+update-po: Makefile
+	$(MAKE) $(DOMAIN).pot-update
+	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+	$(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	cd $(srcdir); \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       0.1[6-7] | 0.1[6-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang --previous -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "msgmerge for $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+	@:
+
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use @SHELL@, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+	cd $(top_builddir) \
+	  && @SHELL@ ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/Makevars.template dpkg-1.20.7.1/scripts/po/Makevars.template
--- dpkg-1.20.7.1-orig/scripts/po/Makevars.template	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/Makevars.template	2021-06-09 18:22:47.475275401 -0500
@@ -0,0 +1,82 @@
+# Makefile variables for PO directory in any package using GNU gettext.
+#
+# Copyright (C) 2003-2019 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to use, copy, distribute, and modify it.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
+# package.  (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.)  Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright.  The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This tells whether or not to prepend "GNU " prefix to the package
+# name that gets inserted into the header of the $(DOMAIN).pot file.
+# Possible values are "yes", "no", or empty.  If it is empty, try to
+# detect it automatically by scanning the files in $(top_srcdir) for
+# "GNU packagename" string.
+PACKAGE_GNU =
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+#   in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+#   understood.
+# - Strings which make invalid assumptions about notation of date, time or
+#   money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS =
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used.  It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
+
+# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
+# context.  Possible values are "yes" and "no".  Set this to yes if the
+# package uses functions taking also a message context, like pgettext(), or
+# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
+USE_MSGCTXT = no
+
+# These options get passed to msgmerge.
+# Useful options are in particular:
+#   --previous            to keep previous msgids of translated messages,
+#   --quiet               to reduce the verbosity.
+MSGMERGE_OPTIONS =
+
+# These options get passed to msginit.
+# If you want to disable line wrapping when writing PO files, add
+# --no-wrap to MSGMERGE_OPTIONS, XGETTEXT_OPTIONS, and
+# MSGINIT_OPTIONS.
+MSGINIT_OPTIONS =
+
+# This tells whether or not to regenerate a PO file when $(DOMAIN).pot
+# has changed.  Possible values are "yes" and "no".  Set this to no if
+# the POT file is checked in the repository and the version control
+# program ignores timestamps.
+PO_DEPENDS_ON_POT = yes
+
+# This tells whether or not to forcibly update $(DOMAIN).pot and
+# regenerate PO files on "make dist".  Possible values are "yes" and
+# "no".  Set this to no if the POT file and PO files are maintained
+# externally.
+DIST_DEPENDS_ON_UPDATE_PO = yes
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/pl.gmo dpkg-1.20.7.1/scripts/po/pl.gmo
--- dpkg-1.20.7.1-orig/scripts/po/pl.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/pl.gmo	2021-06-09 18:25:13.892501807 -0500
@@ -0,0 +1,169 @@
+����i��&|�&'='Q'�e'{( �(J�(@�(-),?);l)"�)�)8�)#*<* D*e*u*�*�*�*!�*(�*#+C+c+}+l�+,(,#E,Ji,�,�,/�,9-&?-f-�-*�-;�-%�-!%.1G.Sy.,�.(�.4#/)X/F�/I�/H0\0m0G0��1Y4'p4B�4(�45@#5<d5��5"Q6It63�6-�6> 75_7��7{�89%9l=9b�;!
>A/>"q>��>)|?#�@(�@)�@TAVrA)�A+�A3BgSB�B,�B8�B1CE=C#�C�C�C�C(�C('DPDmD!�D-�DL�D5'E>]E�E�ES�ES$F,xF'�F�F�F2�F(G:G\XG)�G�G�G'H.H5FH|H�H�H�H�HU�HPIkI�I�I�I�I'�I�I0JJJ!ZJ|J�J�J�J�J�J8�J+K<K![K}K�K)�K�K�KFLFGL�L�L�L�L�L
�L
+MM1M2QM!�M�M�M�M�M*N,7N,dN�N$�N+�NY�N�SO P.@P2oP0�P#�P1�P5)Q
+_Q	jQ(tQ-�Q �Q �Q
RR(6R0_R�R�R6�RS<SDS5XS/�S%�S$�S	T'TET ]T ~T�T)�T�T U)U9UrTU%�U �U=VBLV*�V�V;�V8W
LWZW"xW)�W0�W"�W#X&=XdX)�X<�X �X$Y1Y<MY�YB�Y-�Y!
Z?/ZoZ3�Z:�Z3�Z2[$P[/u[�[�[�[$�[	\' \-H\4v\(�\-�\&]7)]0a]/�]3�]�]?^9N^1�^!�^0�^ 
_9._(h_�_0�_'�_:`%=`c``(�`5�`)�`
+a&a.3aba�a�a�a-�a�a.b=Hb&�b"�b6�bmc"uc'�c4�c4�c*dDd6dd*�dA�de,e:Ae|e�e1�e^�eRLf[�f@�f<g,Wg?�g>�g0h74hlh�h��h&|i/�i�i�ij* j#Kjoj
+{j�j�j
�j�j6�j#
+k.kKkak@zk1�k'�kl
1l2?l1rl<�l�lC�lq7mq�mn./n.^n�n/�n5�n'o*o09o)jo<�o9�op3 pBTp�p
�p!�p�pSq>Uq2�q#�q+�q8roPr,�r$�r.s6As%xs#�s�s%�stt.,t)[t�t-�t�t*�t
u9$u(^u�u�u%�u%�uEvERv:�v�v�v�v2wLw%aw�w�w'�w�w0�w+x"8x-[x1�x�x!�x�x-	y7y*Py7{y5�yj�y*Tzz�z�z�z�z�z.{(F{o{{{�{�{�{+�{=�{;;|Aw|9�|��|��~ g�����\�%O�Vu�ń;�'K�9s�1��߂I��I�^�f�!��5��
ރ��)*�+T�)��&�� ф�m�y�3��0ɅS��N�Z�1p�M��$�� �6�/S�A��+Ň �4�kG�1��0�C�/Z�U��`��WA�����YǊ�!��#)�OM�0��(ΏJ��PB����6a�S��7�.$�KS�G��'��������ڔ�w�$@�Ee�#��Ϛ:ԛ&�)6�8`�S��M�3;�6o�F����o�)��=���I��%C�i�*��%��1ڠ1�#>�b�7��5��O�G@�J��Ӣ*��`�`y�.ڣ.	�8�L�Bg���)��{�4b�
��*��2Х-�@1�'r�$��,�����!� ħ"��#�'A�*i�<��+Ѩ3��1�2N����� ��ة#�+�=@�~���"��ت%��9�"U�/x�c��Z�g�~�����)Ǭ�
��5%�*[�1��!��ڭ��2!�9T�:��ɮ-�=�\L���))�ES�6��8б&	�;0�4l�
+������3Բ�%�B� R�1s�9��߳��5�L�ES���:��7�,(�+U���7��#е ��#�#9�.]�.��#��߶2��&�2��)޷C�RL�-��!͸C�D3�x���$��1ѹ8�)<�'f�+��#��1޺F�.W�/��-��J�/�`D�/��"ռG��3@�<t�T��=�%D�5j�5��־*۾1�*8�c�5~�5��E�(0�7Y�*��?��<��/9�3i�!��G��D�7L�(��6��'��A�3N���0��%��L��*>�i���6��F��& �
G�U�.e�(����<��D�0U�%��2��H��'(�,P�:}����(H�(q�7��M��) �*J�-u�3��N��&�<5�Fr� �� ��9��j5�e��w�R~�!��*��H�Eg�7��J��"0�
+S��^�/�<;�x�����5��)�+�8�(E�n�����F��&�*.�!Y�{�I��E��0+�%\���/��5��7��/�EI�t��t�y�G��=���;(�Md�:����:
+�/E�Iu�O���C%�Pi�����#��2�eO�<��5��$(�<M�Q��u��9R�#��)��H��!#�&E�$l�$������:��K!�"m�9��&��F��
+8�>C�'��!�� ��&��%�J:�K��>���#� ;�8\���#����!��,�8�8V���$��1��:��3�$H� m�+����?��D�D[����B0�s� ����
��#��!��*�$H�m�|�/�� ����0��='�;e�M��M��Q��T��v
�G'�&7�������U^���^��GO��2)���B���?�
+-"�Bk�m�pS�=�m|�y ������RMEc������z{A��
���F���23��3�j�kK�*;�8\���P�,���g��s�$�r(�"��V��Z��?1����O���Q�M�)�%u@7sfn�Lg�t�q������e
+5x�riJ#]h���	�>e��0	�6��RT�%�1wb�f�=�!�xltD]H:����H��9y����-d����U X[����`F�����vi�/���@*_��4|<,}Ca�9�Y�{��b�$oN���D����h�+��Sa�#�W�!���.;����w`���8�4��/P'5���u:��[�d�_��n�C�&l�IK����A.��Yc��0EI(VJ�>jL���zNW+��X\���q~6pZo��~<}���
+This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+  %s (package says %s, not %s)  new version is %s  old version is %s$ORIGIN is used in RPATH of %s and the corresponding directory could not be identified due to lack of DEBIAN sub-directory in the root of package's build tree%d similar warning has been skipped (use -v to see it)%d other similar warnings have been skipped (use -v to see them all)%s contains an insecure path: %s%s contains an unresolvable reference to symbol %s: it's probably a plugin%s didn't complete in %d second%s didn't complete in %d seconds%s does not exist%s doesn't contain a valid OpenPGP signature%s doesn't contain any information about the source package%s doesn't list any binary package%s doesn't match completely %s%s field contains value %s, but no tests control file %s%s field of package %s: %s file%s has an unexpected SONAME (%s)%s is a symlink%s is a symlink to outside %s%s is empty%s is not a compression level%s is not a plain file%s is not a supported compression%s is not a supported compression method%s is not a supported variable name%s is not a valid option for %s%s is not a valid version%s is not the name of a file%s must be updated to support the 'build-arch' and 'build-indep' targets (at least '%s' seems to be missing)%s needs a parameter%s should be a directory or non-existing%s should be a file or non-existing%s should not be linked against %s (it uses none of the library's symbols)%s(l%s): %s%s(l%s): %s
+LINE: %s'%s' is not supported by the source format '%s''dpkg-deb -I %s control' exited with %d, skipping package'offset' without 'count' has no effect(Use -d flag to override.)--%s needs a directory--%s needs at least one argument, the .dsc--%s needs the .dsc file as first argument, not a directory--%s takes no more than two arguments--target-format option is missing-E and -W are deprecated, they are without effect-b takes at most a directory and an orig source argument (with v1.0 source package)-b takes only one parameter with format '%s'-i%s is deprecated; it is without effect-s%s is deprecated; always using gpg style interface-s%s option overrides earlier -s%s option.orig directory name %s is not <package>-<upstreamversion> (wanted %s).orig.tar name %s is not <package>_<upstreamversion>.orig.tar (wanted %s)<control-file> is the control file to process (default: debian/control).<standard input><standard output>Commands:
+  --is <vendor>           returns true if current vendor is <vendor>.
+  --derives-from <vendor> returns true if current vendor derives from <vendor>.
+  --query <field>         print the content of the vendor-specific field.
+  --help                  show this help message.
+  --version               show the version.Commands:
+  -l, --list                list variables (default).
+  -L, --list-known          list valid architectures (matching some criteria).
+  -e, --equal <arch>        compare with host Debian architecture.
+  -i, --is <arch-wildcard>  match against host Debian architecture.
+  -q, --query <variable>    prints only the value of <variable>.
+  -s, --print-set           print command to set environment variables.
+  -u, --print-unset         print command to unset environment variables.
+  -c, --command <command>   set environment and run the command in it.
+  -?, --help                show this help message.
+      --version             show the version.Debian %s version %s.
+Dependency fields recognized are:
+  %s
+Dpkg::Compression::Process can only start one subprocess at a timeDpkg::Shlibs::Objdump couldn't parse %s
+Enter the desired patch name: File::FcntlLock not available; using flock which is not NFS-safeFormat '3.0 (custom)' is only used to create source packagesNote: libraries are not searched in other binary packages that do not have any shlibs or symbols file.
+To help dpkg-shlibdeps find private libraries, you might need to use -l.OpenPGP signature not allowed hereOptions:
+  --vendor <vendor>       assume <vendor> is the current vendor.Packages in archive but missing from override file:Packages in override file but not in archive:Packages in override file with incorrect old maintainer value:Packages specifying same maintainer as override file:Positional options (order is significant):
+  <executable>             include dependencies for <executable>,
+  -e<executable>           (use -e if <executable> starts with '-')
+  -d<dependency-field>     next executable(s) set shlibs:<dependency-field>.This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Usage: %s [<command>]Usage: %s [<option>...]Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Packages
+
+Options:
+  -t, --type <type>        scan for <type> packages (default is 'deb').
+  -a, --arch <arch>        architecture to scan for.
+  -h, --hash <hash-list>   only generate hashes for the specified list.
+  -m, --multiversion       allow multiple versions of a single package.
+  -e, --extra-override <file>
+                           use extra override file.
+  -M, --medium <medium>    add X-Medium field for dselect multicd access method
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Sources
+
+Options:
+  -n, --no-sort            don't sort by package before outputting.
+  -e, --extra-override <file>
+                           use extra override file.
+  -s, --source-override <file>
+                           use file for additional source overrides, default
+                           is regular override file with .src appended.
+      --debug              turn debugging on.
+  -?, --help               show this help message.
+      --version            show the version.
+
+See the man page for the full documentation.
+Usage: %s [<option>...] <command>Usage: %s [<option>...] <executable>|-e<executable> [<option>...]Usage: %s [<option>...] <file>...
+Usage: %s [<option>...] <filename> <section> <priority>
+
+Options:
+  -f<files-list-file>      write files here instead of debian/files.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <old> <new-a> <new-b> [<out>]
+
+Options:
+  -m, --merge-prereleases  merge pre-releases together, ignores everything
+                           after the last '~' in the version.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] [<command>]Usage: %s [<option>...] [<control-file>]Use --help for program usage information.Version number suggests Ubuntu changes, but Maintainer: does not have Ubuntu addressVersion number suggests Ubuntu changes, but there is no XSBC-Original-Maintainer fieldWrote %s entries to output Packages file.aborting due to --abort-on-upstream-changesaborting due to unexpected upstream changes, see %sadd %s in debian/source/include-binaries if you want to store the modified binary in the debian tarballadding %s to %sadministrative directory '%s' does not existan union dependency can only contain simple dependenciesapplying %sarchitecture %s only allowed on its own (list for package %s is '%s')assuming architecture '%s' for '%s'assuming section '%s' for '%s'bad binary-only value: %sbad key-value after ';': '%s'bad line in substvars file %s at line %dbad package control information for '%s'badly formatted heading linebadly formatted trailer linebadly formatted urgency value: %sbadly formed line in files list file, line %dbinaries to analyze should already be installed in their package's directorybinary and diff upload (original source NOT included)binary build with no binary artifacts found; cannot distributebinary control file %sbinary file contents changedbinary-only arch-indep upload (source code and arch-specific packages not included)binary-only arch-specific upload (source code and arch-indep packages not included)binary-only upload (no source code included)binary-only upload (no source included)block deviceblock lacks the '%s' fieldbuild dependencies/conflicts unsatisfied; abortingbuilding %s in %sbuilding %s using existing %sbuilding a source package without cleaning up as you asked; it might contain undesired filesbuilding source for a binary-only releasebundling: %sbzr status exited nonzerocan't build with source format '%s': %scan't create symlink %scan't extract name and version from library name '%s'can't parse dependency %scan't read directory %s: %scannot change timestamp for %scannot close %scannot combine %s and %scannot continue due to the error abovecannot continue due to the errors listed abovecannot create directory %scannot create directory '%s'cannot find '%s'cannot find an editorcannot fork for %scannot fstat file %scannot install output control file '%s'cannot make %s executablecannot merge symbols from objects without SONAMEcannot mkdir %scannot move '%s' to existing filecannot open %scannot open file %scannot opendir %scannot read %scannot read link %scannot read timestamp from %scannot register changes in %s, this patch already existscannot remove %scannot represent change to %s:cannot represent change to %s: %scannot stat %scannot stat directory %scannot stat directory %s (before removal)cannot stat file %scannot stat orig argument %scannot unpack bzr-format source package because bzr is not in the PATHcannot unpack git-format source package because git is not in the PATHcannot write %scharacter '%s' not allowedcharacter devicechdir to %scheck-command '%s' not foundchild processcloning %sclose on tar inputconflicting checksums '%s' and '%s' for file '%s'conflicting file sizes '%u' and '%u' for file '%s'continued value line not in fieldcontrol info of a .deb packagecontrol informationcopy of the debian directorycouldn't close stdoutcouldn't parse control information from %scouldn't parse dynamic relocation record: %scouldn't parse dynamic symbol definition: %screated directory '%s'creating shallow clone with depth %sdebian/rules is not executable; fixing thatdefault GNU system type %s for Debian arch %s does not match specified GNU system type %sdetected %d unwanted binary file (add it in debian/source/include-binaries to allow its inclusion).detected %d unwanted binary files (add them in debian/source/include-binaries to allow their inclusion).device or socket is not alloweddiff %s modifies file %s through a symlink: %sdiff %s patches file with C-style encoded filenamediff %s removes a non-existing file %s (line %d)diff '%s' doesn't contain any patchdiff '%s' finishes in middle of ---/+++ (line %d)diff '%s' patches something which is not a plain filediff on %sdirectorydirectory argument %s is not a directorydiversions involved - output may be incorrectdoesn't contain a bzr repositorydoesn't contain a git repositorydpkg-genchangesduplicate field %s foundduplicate files in %s source package: %sduplicate files list entry for file %s (line %d)entry in dpkg's status fileentry in repository's %s fileepoch part of the version number is not a number: '%s'errorexecutable mode %04o of '%s' will not be represented in diffexpected %s, got %sexpected OpenPGP signature, found something else '%s'expected [ +-] at start of line %d of diff '%s'expected ^--- in line %d of diff '%s'expected ^@@ at line %d of diff '%s'extracting %s in %sextracting unsigned source package (%s)failed to copy %s to %sfailed to get a write lock on %sfailed to parse a line in %s: %sfailed to parse line in %s: %sfailed to rename newly-extracted %s to %sfailed to rename saved %s to %sfailed to verify signature on %sfailed to writefailed when writing stdoutfakeroot not found, either install the fakeroot
+package, specify a command with the -r option, or run this as rootfatal error occurred while parsing %sfield cannot start with a hyphenfile %s has checksum %s instead of expected %s (algorithm %s)file %s has no final newline (either original or modified version)file %s has size %u instead of expected %ufile arguments need to existfile removal without proper filename in diff '%s' (line %d)filename, section and priority may contain no whitespacefirst headingformat v3.0 (git) expected %sformat v3.0 (git) unknown file: %sformat v3.0 (git) uses only one .git fileformat v3.0 (git) uses only one .gitshallow filefound blank line where expected %sfound change data where expected %sfound start of entry where expected %sfound trailer where expected %sfull upload (original source is included)full upload; Debian-native package (full source is included)gain-root-command '%s' not foundgeneral section of control info filegit ls-files exited nonzerogit repository %s uses submodules; this is not yet supportedhost architectureif patch '%s' is correctly applied by quilt, use '%s' to update itignoring -sd option for native Debian packageignoring deletion of directory %signoring deletion of file %s, use --include-removal to overrideignoring deletion of symlink %signoring duplicate override entry for %s at line %dignoring duplicate source override entry for %s at line %dignoring override entry for %s, invalid priority %sillegal package name '%s': %sincluding full source code in uploadincorrect value in %s option of %s variable: %sinfoinstall new files list fileinstall new varlist file '%s'invalid dependency got generated: %sinvalid flag in %s: %sinvalid line in %s checksums string: %sinvalid override entry at line %d (%d fields)invalid source override entry at line %d (%d fields)invalid syntax for option in %s, line %dline %d of %s is invalid, it has been ignoredline %d of %s mentions unknown flag %sline after --- isn't as expected in diff '%s' (line %d)line with unknown format (not field-colon-value)local changes detected, the modified files are:local changes have been recorded in a new patch: %smay not be empty stringmismatched addon orig.tar %s for signature %s in source packagemismatched orig.tar %s for signature %s in source packagemissing Priority for binary package %s; using '-'missing Priority for source filesmissing Section for binary package %s; using '-'missing Section for source filesmissing addon orig.tar for signature %s in source packagemissing critical source control field %smissing hook %s commandmissing information for critical output field %smissing information for output field %smissing orig.tar or debian.tar file in v2.0 source packagemkdir can be used to create directorymore change data or trailermoved '%s' to '%s'multiple tarfiles in v1.0 source packagemust specify package since control info has many (%s)must start with an alphanumeric characternamed pipenamed socketnative package version may not have a revisionnative package with .orig.tarneed an action optionneed at least a filenameneed at least one executableneed exactly a filename, section and priorityneeds at least three argumentsnew libraries appeared in the symbols file: %snewly created empty file '%s' will not be represented in diffno Package field in control file of %sno binary packages specified in %sno debian/symbols file used as basis for generating %sno dependency information found for %s (used by %s)
+Hint: check if the library actually comes from a package.no files indicated on command lineno package stanza found in control infono source format specified in %s, see dpkg-source(1)no such directory '%s', try --create-dir (-c) optionno tarfile in Files fieldno upstream tarball found at %snon-native package version does not contain a revisionnone found, starting from the oldest entrynone of the filenames in ---/+++ are valid in diff '%s' (line %d)nonexistentnot including original source code in uploadnot signing UNRELEASED build; use --force-sign to overrideone to three arguments expectedonly supports gzip compressionorig argument %s is not a plain file or directoryorig argument is empty (means no orig, no diff) but source handling style -s%s wants somethingorig argument is packed but source handling style -s%s calls for unpacked (.orig/)orig argument is unpacked but source handling style -s%s calls for packed (.orig.tar.<ext>)original and modified files are /dev/null in diff '%s' (line %d)override file %s not foundpackage %s (filename %s) has Filename field!package %s has priority %s in control file but %s in files listpackage %s has section %s in control file but %s in files listpackage %s in control file but not in files listpackage %s listed in files list but not in control infopackage %s not in control infopackage %s: package could avoid a useless dependency if %s was not linked against %s (it uses none of the library's symbols)package could avoid a useless dependency if %s were not linked against %s (they use none of the library's symbols)package's section of control info filepacked orig '%s' exists but is not a plain fileparse changes fileparsed version of changelogpatch file '%s' doesn't existpatches are not applied, applying them nowpattern '%s' did not match any filepipe for %splain fileremove patch backup file %sreopen stdinreopen stdoutrepeated key-value %srequired removal of '%s' installed by original tarballrestoring quilt backup files for %srm -rf failed to remove '%s'see diff output belowsetting up shallow cloneseveral orig.tar files found (%s and %s) but only one is allowedshared libs info file '%s' line %d: bad line '%s'short option not allowed in %s, line %dsign-command '%s' not foundskipping '%s'some libraries disappeared in the symbols file: %ssome new symbols appeared in the symbols file: %ssome symbols or patterns disappeared in the symbols file: %ssource changed bysource directory '%s' is not <sourcepackage>-<upstreamversion> '%s'source directory is not the top directory of a bzr repository (%s/.bzr not present), but Format bzr was specifiedsource directory is not the top directory of a git repository (%s/.git not present), but Format git was specifiedsource distributionsource handling style -s%s not allowed with -bsource handling style -s%s not allowed with -xsource packagesource package format '%s' is not supported: %ssource package has two conflicting values - %s and %ssource package name '%s' is illegal: %ssource versionsource-only upload (original source is included)source-only upload: Debian-native packagesource-only, diff-only upload (original source NOT included)special mode %04o of '%s' will not be represented in diffstart of change datasymbol %s used by %s found in none of the librariessymbol information must be preceded by a header (file %s, line %s)symbol name unspecified: %ssymlink to %ssyntax error in %s at line %d: %stakes no non-option argumentstarfile '%s' already exists, not overwriting, giving up; use -sU or -sR to overridethe current version (%s) is earlier than the previous one (%s)the diff modifies the following upstream files: %sthe generated symbols file is emptythe header doesn't match the expected regexthe patch has fuzz which is not allowed, or is malformedthe series file (%s) contains unsupported options ('%s', line %s); dpkg-source might fail when applying patchesthe trailer doesn't match the expected regexthere are no local changes to recordtoo many substitutions - recursive ? - in '%s'tried to merge the same object (%s) twice in a symfiletwo commands specified: --%s and --%sunable to change permission of '%s'unable to chdir to '%s'unable to check for existence of '%s'unable to determine %sunable to execute %sunable to keep orig directory (already exists)unable to open shared libs info file '%s'unable to rename %s to %sunable to rename '%s' (newly created) to '%s'unable to rename '%s' to '%s'unable to stat putative unpacked orig '%s'unapplying %suncommitted, not-ignored changes in working directory: %sunconditional maintainer override for %sunexpected end of diff '%s'unfinished OpenPGP signatureunknown %% substitution in hook: %%%sunknown %s feature in %s variable: %sunknown Debian architecture %s, you must specify GNU system type, toounknown GNU system type %s, you must specify Debian architecture, toounknown default GNU system type for Debian architecture %sunknown file typeunknown hook name %sunknown host architecture '%s'unknown information field '%s' in input data in %sunknown key-value %sunknown line from diff -u on %s: '%s'unknown option '%s'unknown option or argument %sunknown output from dpkg --search: '%s'unpack target exists: %sunpacked orig '%s' exists but is not a directoryunpacking %sunrecognized dependency field '%s'unrecognized file for a %s source package: %sunrecognized file for a native source package: %sunrecognized lineunrepresentable changes to sourceunsupported checksum '%s'unsupported version of the quilt metadata: %sunwanted binary file: %supstream files that have been modified: %suse newest entry that is earlier than the one specifieduse oldest entry that is later than the one specifieduse the '3.0 (quilt)' format to have separate and documented changes to upstream files, see dpkg-source(1)using a gain-root-command while being rootusing options from %s: %susing source format '%s'vendor %s doesn't exist in %svendor fileversion '%s' is invalid: %sversion number cannot be emptyversion number contains illegal character '%s'version number does not start with digitwait for %swarningwrite diversion info to stderrwrite error on control datawrite on tar inputyou can integrate the local changes with %syou can only specify one of 'from' and 'since', using 'since'you can only specify one of 'to' and 'until', using 'until'you can't combine 'count' or 'offset' with any other range optionyou can't use symver tag to catch unversioned symbols: %sProject-Id-Version: dpkg-dev 1.15.4
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 07:05+0200
+Last-Translator: Łukasz Dulny <BartekChom@poczta.onet.pl>
+Language-Team: Polish <debian-l10n-polish@lists.debian.org>
+Language: pl
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=3; plural=n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2;
+X-Generator: Lokalize 1.5
+
+Ten program jest oprogramowaniem wolnym, rozpowszechnianym na warunkach
+licencji GNU w wersji drugiej lub późniejszej. Brak JAKIEJKOLWIEK gwarancji.
+  %s (pakiet zawiera %s, nie %s)  nową wersją jest %s  starą wersją jest %s$ORIGIN jest użyte RPATH pliku %s, ale nie można znaleźć odpowiadającego mu katalogu z powodu braku podkatalogu DEBIAN w głównym katalogu budowania pakietupominięto %d podobne ostrzeżenie (proszę użyć -v, aby je zobaczyć).pominięto %d podobne ostrzeżenia (proszę użyć -v, aby zobaczyć je wszystkie).pominięto %d podobnych ostrzeżeń (proszę użyć -v, aby zobaczyć je wszystkie).%s zawiera niezaufaną ścieżkę: %s%s zawiera nierozwiązywalne odniesienia do symbolu %s: prawdopodobnie jest to wtyczka%s nie zakończył się w %d sekundę%s nie zakończył się w %d sekundy%s nie zakończył się w %d sekund%s nie istnieje%s nie zawiera ważnego podpisu OpenPGP%s nie zawiera żadnej informacji o pakiecie źródłowym%s nie zawiera wpisu o żadnym pakiecie binarnym.%s całkowicie nie pasuje do %spole %s zawiera wartość %s, ale nie zawiera plików kontroli testów %spole %s pakietu %s: plik %s%s ma nieoczekiwane SONAME (%s)%s jest dowiązaniem symbolicznym%s jest dowiązaniem symbolicznym do zewnętrznego %s%s jest puste %s nie jest poziomem kompresji %s nie jest zwykłym plikiem%s nie jest obsługiwanym typem kompresji%s nie jest obsługiwaną metodą kompresji%s nie jest obsługiwaną nazwą zmiennej%s nie jest prawidłową opcją dla %s%s nie jest prawidłową wersją%s nie jest nazwą pliku%s musi zostać zaktualizowane w celu obsługi celów "build-arch" i 'build-indep' (brakuje co najmniej "%s")%s wymaga podania parametru%s powinno być katalogiem lub nie powinno istnieć%s powinno być plikiem lub nie powinno istnieć%s nie powinien być linkowany z %s (nie są używane żadne z tamtejszych symboli)%s(l%s): %s%s(l%s): %s
+LINIA: %s"%s" nie obsługiwane przez format źródeł "%s""dpkg-deb -I %s control" zakończył działanie z kodem %d, pomijanie pakietu"offset" bez "count" nic nie zmienia(Użyj opcji -d, aby nadpisać).--%s wymaga podania katalogu--%s wymaga co najmniej jednego argumentu, .dsc--%s wymaga pliku .dsc, a nie katalogu, jako pierwszego argumentu--%s pobiera nie więcej niż dwa argumentynie podano opcji --target-format-E i -W są przestarzałe, nie mają żadnego efektu-b pobiera co najwyżej dwa argumenty: katalog i oryginalne źródła (z wersją 1.0 pakietu źródłowego)-b przyjmuje tylko jeden parametr w formacie "%s"-i%s jest przestarzałe - nie ma żadnego efektu-s%s jest przestarzałe, zawsze używany jest interfejs w stylu gpgopcja -s%s nadpisuje wcześniejszą opcję -s%snazwa katalogu .orig %s nie jest w postaci <pakiet>-<wersja_główna> (oczekiwano %s)nazwa pliku .orig.tar %s nie jest w postaci <pakiet>-<wersja_główna>.orig.tar. (oczekiwano %s)<plik_kontrolny> jest plikiem kontrolnym do przetworzenia (domyślnie: debian/control).<standardowe wejście><standardowe wyjście>Polecenia:
+  --is <dost>            zwraca prawdę, jeśli aktualnym dostawcą jest <dost>.
+  --derives-from <dost>  zwraca prawdę, jeśli dostawca pochodzi od <dost>.
+  --query <pole>         zwraca wartość pola określonego dla dostawcy.
+  --help                 wyświetla ten komunikat pomocy.
+  --version              wyświetla wersję.Polecenia:
+  -l, --list             wyświetla listę zmiennych (domyślnie).
+  -L, --list-known       wyswietla poprawne arch. (spełniające pewne kryteria).
+  -e, --equal <arch>     porównuje z architekturę Debiana hosta.
+  -i, --is <arch_wieloznacznik>
+                         dopasowuje do architektury Debiana hosta.
+  -q, --query <zmienna>  wyświetla tylko wartość <zmiennej>.
+  -s, --print-set        wyświetla polecenie ustawiające zmienne środowiska.
+  -u, --print-unset      wyświetla polecenie usuwające zmienne środowiska.
+  -c, --command <polecenie>
+                         ustawia środowisko i wykonuje w nim polecenie.
+  -?, --help             wyświetla ten komunikat pomocy.
+      --version          wyświetla wersję.Debian %s w wersji %s.
+Rozpoznane pola zależności:
+  %s
+Dpkg::Compression::Process może jednocześnie uruchomić tylko jeden podprocesDpkg::Shlibs::Objdump nie może przetworzyć %s
+Proszę wpisać żądaną nazwę łatki:File::FcntlLock niedostępny - użycie flock - nie jest bezpieczny dla NFSFormat "3.0 (custom)" jest używany jedynie do tworzenia pakietów źródłowychUwaga: bibliotek nie szuka się w innych pakietach binarnych, które nie mają żadnego pliku shlibs lub symbols.
+Aby pomóc dpkg-shlibdeps w znajdowaniu prywatnych bibliotek, być może należy użyć -l.sygnatura OpenPGP nie może występować w tym miejscuOpcje:
+  --vendor <dostawca>     przyjmij, że <dostawca> jest aktualnym dostawcą.Pakiety w archiwum, których brakuje w pliku nadpisań:Pakiety w pliku nadpisań, ale nie w archiwum:Pakiety w pliku nadpisań z niepoprawną wartością poprzedniego opiekuna:Pakiety mające tego samego opiekuna, jak wymieniony w pliku nadpisań:Opcja pozycyjne (kolejność jest istotna):
+  <plik_wykonywalny>       uwzględnia zależności <pliku_wykonywalnego>,
+  -e<plik_wykonywalny>     (można użyć, jeśli <plik_wykonywalny> zaczyna się "-")
+  -d<pole_zależności>      następny plik(i) wykonywalny ustawia shlibs:<pole_zależn>.Ten program jest oprogramowaniem wolnym, rozpowszechnianym na warunkach
+licencji GNU w wersji drugiej lub późniejszej. Brak JAKIEJKOLWIEK gwarancji.
+Użycie: %s [<polecenie>]Użycie: %s [<opcja>...]Użycie: %s [<opcja> ...] <ścieżka_binariów> [<plik_nadpisań> [<prefiks_ścieżki>]] > Packages
+
+Opcje:
+  -t, --type <typ>         skanuje pakiety o <typie> (domyślnie "deb").
+  -a, --arch <arch>        architektura, która będzie skanowana.
+  -h, --hash <lista-skrótów>  generuje tylko skróty z listy.
+  -m, --multiversion       dopuszcza wiele wersji pojedynczego pakietu.
+  -e, --extra-override <plik>
+                           używa dodatkowego pliku nadpisań.
+  -M, --medium <medium>    dodaje pole X-Medium do metody dostępu multicd dselect.
+  -?, --help               wyświetla ten komunikat pomocy.
+      --version            wyświetla wersję.
+Użycie: %s [<opcja> ...] <ścieżka_binariów> [<plik_nadpisań> [<prefiks_ścieżki>]] > Sources
+
+Opcje:
+  -n, --no-sort            nie sortuje wyjścia po nazwach pakietów.
+  -e, --extra-override <plik>
+                           używa dodatkowego pliku nadpisań.
+  -s, --source-override <plik>
+                           używa pliku jako dodatkowych nadpisań źródeł, domyślnie
+                           jest to zwykły plik nadpisań z dołączonym sufiksem .src 
+      --debug              włącza debugowanie.
+  -?, --help               wyświetla ten komunikat pomocy.
+      --version            wyświetla wersję.
+
+Pełną dokumentację można znaleźć na stronach podręcznika systemowego.
+Użycie: %s [<opcja>...] <polecenie>Użycie: %s [<opcja>...] <plik_wykonyw>|-e<plik_wykonyw> [<opcja>...]Użycie: %s [<opcja>...] <plik>...
+Użycie: %s [<opcja> ...] <nazwa-pliku> <sekcja> <priorytet>
+
+Opcje:
+  -f<plikzlistąplików>     zapisuje pliki do podanego pliku zamiast debian/files.
+  -?, --help               wyświetla ten komunikat pomocy.
+      --version            wyświetla wersję.
+Użycie: %s [<opcja> ...] <stary> <nowy-a> <nowy-b> [<wyjście>]
+
+Opcje:
+  -m, --merge-prereleases  łączy przedwydania, ignorując wszystko po
+                           ostatnim "~" w wersji.
+  -?, --help               wyświetla ten komunikat pomocy.
+      --version            wyświetla informacje o wersji.
+Użycie: %s [<opcja>...] [<polecenie>]Użycie: %s [<opcja>...] <plik-kontrolny>Użyj --help dla uzyskania informacji o użyciu programuNumer wersji sugeruje zmiany z Ubuntu, ale Maintainer: nie określa adresu z UbuntuNumer wersji sugeruje zmiany z Ubuntu, ale brak pola XSBC-Original-MaintainerZapisano %s wpisów do wyjściowego pliku Packages.przerywanie ze względu na --abort-on-upstream-changesprzerywanie, ze względu na nieoczekiwane zmiany macierzyste, patrz %sproszę dodać %s w debian/source/include-binaries jeśli zmodyfikowane binaria mają się znaleźć w wynikowym archiwum Debianadodawanie %s do %skatalog administracyjny "%s" nie istniejesuma zależności może zawierać jedynie proste zależnościaplikowanie %sarchitektura %s dopuszczalna tylko sama (listą dla pakietu %s jest "%s")przyjęcie architektury "%s" dla "%s"przyjęcie sekcji "%s" dla "%s"nieprawidłowa wartość tylko binarna: %sbłędny klucz-wartość po ";": "%s"błędna linia w pliku podstawień %s, w linii %dzła informacja kontrolna pakietu dotycząca "%s"niepoprawny format linii nagłówkaniepoprawny format linii stopkiniepoprawnie sformatowana wartość pola ważności: %sniepoprawna linia w pliku z listą plików w linii %dpliki binarne do analizy powinny już być zainstalowane w katalogu ich pakietuwydanie binarne i pliku różnic (oryginalne źródła NIE dołączone)znaleziono wyd. binarne bez bin. artefaktów - nie można rozpowszechniaćbinarny plik kontrolny %szawartość pliku binarnego zmieniła sięwydanie tylko binarne niezależne dla arch (żródła i pakiety zależne od arch niedołączone)wydanie tylko binarne zależne dla arch (żródła i pakiety niezależne od arch niedołączone)wydanie tylko binarne (bez żadnych źródeł)wydanie tylko binarne (bez żadnych źródeł)urządzenie blokoweblok nie zawiera pola "%s"niespełnione zależności/konflikty czasu budowania - przerywaniebudowanie %s w %sbudowanie %s, używając istniejącego %sgenerowanie pakietu źródłowego bez wcześniejszego czyszczenia według żądania - może on zawierać niepotrzebne plikibudowanie źródeł do wydania wyłącznie binarnegopakowanie: %sbzr status zwrócił niezerowy kod błędunie można zbudować z formatem źródeł "%s": %snie można utworzyć linku symbolicznego "%s"nie można wydobyć nazwy i wersji z nazwy pliku biblioteki "%s"nie można przetworzyć zależności %snie można odczytać katalogu %s: %snie można zmienić czasu modyfikacji dla %snie można zamknąć %snie można łączyć %s i %snie można kontynuować z powodu powyższego błędunie można kontynuować z powodu powyższych błędównie można kontynuować z powodu powyższych błędównie można utworzyć katalogu %snie można utworzyć katalogu "%s"nie można odnaleźć "%s"nie można odnaleźć edytoranie można wykonać funkcji fork dla %snie można ustalić stanu (fstat) pliku %snie można zainstalować wyjściowego pliku kontrolnego "%s"nie można uczynić %s plikiem wykonywalnymnie można połączyć symboli z obiektu bez SONAMEnie można wykonać mkdir %snie można przenieść "%s" do istniejącego plikunie można otworzyć %snie można otworzyć pliku %snie można otworzyć katalogu %snie można odczytać %snie można odczytać dowiązania %snie można odczytać czasu modyfikacji z %snie można zarejestrować zmian w %s, ta łatka już istniejenie można usunąć %sniereprezentowalna zmiana w %s:niereprezentowalne zmiany w %s: %snie można ustalić stanu %snie można ustalić stanu katalogu %snie można ustalić stanu katalogu %s (przed usunięciem)nie można ustalić stanu pliku %snie można ustalić stanu dla argumentu orig %snie można rozpakować pakietu źródłowego w formacie bzr, ponieważ bzr nie znajduje się w PATHnie można rozpakować pakietu źródłowego w formacie git, ponieważ git nie jest w PATHnie można zapisać %sznak "%s" nie jest dozwolonyurządzenie znakowezmiana katalogu na "%s"nie znaleziono polecenia-sprawdzenia "%s"proces potomnyklonowanie %szamykanie wejścia tarkonflikt sum kontrolnych pliku "%s" i "%s" pliku "%s"konflikt rozmiarów "%u" i "%u" pliku "%s"linia kontynuowanej wartości nie należy do polainformacje kontrolne pakietu .debinformacje kontrolnekopia katalogu debiannie można zamknąć stdoutnie można przetworzyć informacji kontrolnej z %snie można przetworzyć rekordu dynamicznej relokacji: %snie można przetworzyć definicji symboli dynamicznych: %sutworzono katalog "%s"tworzenie płytkiego klonu o głębokości %sdebian/rules nie jest plikiem wykonywalnym - naprawianie tegodomyślny typ systemu GNU %s dla arch. Debiana %s nie pasuje do podanego typu systemu GNU %swykryto %d niechciany plik binarny (należy go wymienić w debian/source/include-binaries, aby umożliwić jego włączenie).wykryto %d niechciane pliki binarne (należy je wymienić w debian/source/include-binaries, aby umożliwić ich włączenie).wykryto %d niechcianych plików binarnych (należy je wymienić w debian/source/include-binaries, aby umożliwić ich włączenie).urządzenie lub gniazdo nie są dozwolonełatka %s modyfikuje plik %s za pomocą dowiązania symbolicznego: %splik łatki "%s" łata plik o nazwie w stylu języka Cplik łatki "%s" usuwa nieistniejący plik %s (linia %d)łatka "%s" nie zawiera żadnej łatkiplik łatki "%s"  kończy się w środku ---/+++ (linia %d)łatka "%s" łata coś, co nie jest zwykłym plikiemdiff na %skatalogargument %s nie jest katalogiemnadpisania użyte - wyjście może być niepoprawnenie zawiera repozytorium gitnie zawiera repozytorium gitdpkg-genchangesznaleziono powtórzone pole w %szduplikowane pliki w pakiecie źródłowym %s: %szduplikowany wpis o pliku %s w liście plików (linia %d)wpis w pliku statusu dpkgwpis w pliku repozytorium %sczęśc epoki w numerze wersji nie jest liczbą: "%s"błądprawa dostępu %04o pliku "%s" nie będą dołączone do pliku łatkioczekiwano %s, otrzymano %soczekiwano sygnatury OpenPGP, a napotkano coś innego "%s"oczekiwano [+-] na początku linii %d pliku łatki "%s"oczekiwano ^--- w linii %d pliku łatki "%s"oczekiwano ^@@ w linii %d pliku łatki "%s"rozpakowywanie %s w %swydobywanie niepodpisanych pakietów źródłowych (%s)nie udało się skopiować %s do %snie uzyskano blokady zapisu w %sbłąd przetwarzania linii w %s: %sbłąd przetwarzania linii w %s: %snie można zmienić nowo wypakowanego %s na %snie można zmienić nazwy zachowanego %s na %sbłąd weryfikowania sygnatury w %snie można zapisaćbłąd podczas wypisywania na standardowe wyjścienie znaleziono fakeroot, proszę zainstalować pakiet fakeroot lub
+podać polecenie w opcji -r, lub uruchomić ten program jako rootwystąpił fatalny błąd podczas przetwarzania %spole nie może zaczynać się myślnikiemplik %s ma sumę kontrolną %s zamiast oczekiwanej %s (algorytm %s)plik %s nie kończy się znakiem nowej linii (albo oryginalny, albo zmodyfikowany)plik %s ma rozmiar %u zamiast oczekiwanego %uargumenty plikowe muszą istniećusuwanie pliku bez właściwej nazwy w pliku łatki "%s" (linia %d)nazwa pliku, sekcja i priorytet nie mogą zawierać białych znakówpierwszy nagłówekformat v3.0 (git) oczekiwano %snieznany plik formatu v3.0 (git): %sformat v3.0 (git) używa tylko jednego pliku .gitformat v3.0 (git) używa tylko jednego pliku .gitshallowoczekiwano %s, a znaleziono pustą linięoczekiwano %s, a znaleziono datę zmianoczekiwano %s, a znaleziono początek wpisuoczekiwano %s, a znaleziono trailerpełne wydanie (oryginalne źródła dołączone)pełne wydanie - natywny pakiet Debiana (pełne źródła dołączone)nie znaleziono polecenia-uzysk-praw-admin "%s"sekcja ogólna pliku z informacjami kontrolnymigit ls-files zwrócił niezerowy kod wyjściarepozytorium git %s używa podmodułów - to nie jest jeszcze obsługiwanearchitektura gościajeśli łatka "%s" została poprawnie nałożona przez quilt, użyj "%s", aby ją zaktualizowaćnatywny pakiet Debiana - ignorowanie opcji -sd zignorowano usunięcie katalogu %szignorowano usunięcie pliku %s, użyj --include-removal, aby nadpisaćzignorowano usunięcie dowiązania symbolicznego %signorowanie zduplikowanego wpisu nadpisań dla %s w linii %dignorowanie zduplikowanego wpisu dotyczącego nadpisania źródeł dla %s w linii %dignorowanie wpisu nadpisania dla %s, niepoprawny priorytet %snieprawidłowa nazwa pakietu "%s": %sdołączanie pełnych kodów źródłowych do wydanianieprawidłowa wartość w opcjach %s zmiennej %s: %sinfoinstalowanie nowego pliku z listą plikówinstalowanie nowego pliku z listą zmiennych "%s"wygenerowano niepoprawną zależność: %sniepoprawna flaga w %s: %sniepoprawne wiersz w %s łańuchu sum kontrolnych: %sniepoprawny wpis pliku nadpisań w linii %d (%d pól)niepoprawny wpis dotyczący nadpisania źródeł w linii %d (%d pól)błąd składni do opcji w %s, wiersz %dwiersz %d z %s jest nieprawidłowy, został zignorowanywiersz %d z %s zawiera nieznaną flagę %slinia po --- nie jest oczekiwana w pliku łatki "%s" (linia %d)nieznany format linii (oczekiwano: pole-dwukropek-wartość)wykryto lokalne zmiany, zmodyfikowane pliki to:lokalne zmiany zostały zapisane w nowej łatce: %snie może być łańcuchem pustymniedopasowany dodatek orig.tar %s dla sygnatury %s w pliku źródłowymniedopasowany plik orig.tar %s dla sygnatury %s w pliku źródłowymbrak pola Priority pakietu binarnego %s - używanie "-"brak pola Priority plików źródłowychbrak pola Section pakietu binarnego %s - używanie "-"brak pola Section plików źródłowychbrakujący dodatek orig.tar dla sygnatury %s w pliku źródłowymbrak krytycznego źródłowego pola kontrolnego %s brak polecenia hooka %sbrak informacji o krytycznym polu wyjściowym %sbrak informacji o polu wyjściowym %sbrakujący plik orig.tar lub debian.tar dla wersji 2.0 pakietu źródłowegodo utworzenia katalogu można użyć mkdirwięcej dat zmian lub traileraprzenoszenie "%s" do "%s"wiele archiwów tar w pakiecie źródłowym wersji 1.0należy podać pakiet, ponieważ plik kontrolny zawiera ich kilka (%s)musi zaczynać się literą lub cyfrąnazwany potoknazwane gniazdonatywna wersja pakietu może nie mieć rewizjipakiet natywny z rozszerzeniem .orig.tarpotrzebna opcja akcjiwymaga co najmniej jednego argumentu będącego nazwą plikuwymaga co najmniej jednego argumentu będącego plikiem wykonywalnymnależy podać nazwę pliku, sekcję i priorytetwymaga co najmniej trzech argumentóww pliku symboli pojawiły się nowe biblioteki: %snowo utworzony pusty plik "%s" nie będzie dołączony do pliku różnicbrak pola Package w pliku kontrolnym %snie podano żadnych pakietów binarnych w %sdo generowania %s nie użyto żadnego pliku debian/symbolsnie znaleziono informacji o zależnościach dla %s (używanego przez %s)
+Wskazówka: sprawdź, czy biblioteka rzeczywiście pochodzi z pakietu.nie podano plików w wywołaniu programubrak wpisu o pakiecie w pliku kontrolnymw %s nie podano formatu źródeł, patrz dpkg-source(1)katalog "%s" nie istnieje, proszę spróbować użyć opcji --create-dir (-c)pole Files nie zawiera nazwy archiwum tarnie znaleziono archiwum macierzystego w %snienatywna wersja pakietu nie zawiera rewizjinie znaleziono, rozpoczynanie od najstarszego wpisużadna z nazw plików w ---/+++ nie jest prawidłowa w łatce "%s" (wiersz %d)nieistniejąceniedołączanie oryginalnych kodów źródłowych do wydanianie podpisywane wydanie UNRELEASED - użyj --force-sign, aby nadpisaćoczekiwano od 1 do 3 argumentówobsługuje tylko kompresję gzipargument oryg %s nie jest zwykłym plikiem ani katalogiemargument orig jest pusty (brak orig i różnic), ale opcja przetwarzania źródeł -s%s oczekuje jakiegośargument orig jest spakowany, ale opcja przetwarzania źródeł -s%s oczekuje niespakowanego (.orig/)argument orig jest niespakowany, ale opcja przetwarzania źródeł -s%s oczekuje spakowanego (.orig.tar.<rozszerzenie>)oryginalnym i zmodyfikowanym plikiem jest /dev/null w pliku łatki "%s" (linia %d)nie znaleziono pliku nadpisań %spakiet %s (plik %s) zawiera pole Filename!pakiet %s ma priorytet %s w pliku kontrolnym, ale %s - w liście plikówpakiet %s ma w pliku kontrolnym sekcję %s , a w liście plików - %spakiet %s w pliku kontrolnym, ale nie w liście plikówpakiet %s wymieniony w liście plików, ale nie w informacjach kontrolnychbrak pakietu %s w pliku kontrolnympakiet %s:można by uniknąć niepotrzebnych zależności, jeśli %s nie zostałoby zlinkowane wobec %s (nie używa ono żadnego z symboli biblioteki)można by uniknąć niepotrzebnych zależności, jeśli %s nie zostałyby zlinkowane wobec %s (nie używają one żadnego z symboli biblioteki)można by uniknąć niepotrzebnych zależności, jeśli %s nie zostałyby zlinkowane wobec %s (nie używają one żadnego z symboli biblioteki)sekcja pakietu pliku z informacjami kontrolnymispakowany oryg. "%s" istnieje, ale nie jest zwykłym plikiemprzetwarzanie pliku zmianprzetworzona wersja pliku zmianłatka "%s" nie istniejełatki nie zostały nałożone, nakładanie ich terazwzorzec "%s" nie pasuje do żadnego plikupotok dla %szwykły plikusuwanie kopii zapasowej pliku łatki %sponowne otwieranie stdinponowne otwieranie stdoutpowtórzone klucz-wartość %swymagane usunięcie "%s" zainstalowanego przez oryginalne archiwum tarprzywracanie plików kopii quilt do %sniepowodzenie rm -rf podczas usuwania "%s"patrz poniższe wyjście różnickonfigurowanie płytkiego klonuznaleziono kilka plików orig.tar (%s i %s), a dozwolony jest tylko jedenplik bibliotek współdzielonych %s, linia %d: niepoprawna linia "%s"krótka opcja nie jest dozwolona w %s, wiersz %dnie znaleziono polecenia-podpisu "%s"pomijanie "%s"pewne biblioteki zniknęły z pliku symboli: %spewne nowe symbole pojawiły się w pliku symboli: %spewne symbole lub wzorce zniknęły z pliku symboli: %sźródła zmienione przezkatalog źródłowy "%s" nie jest w postaci <pakiet_źródłowy> "%s"katalog źródłowy nie jest głównym katalogiem repozytorium bzr (nie ma %s/.bzr), ale został wskazany Format bzrkatalog źródłowy nie jest głównym katalogiem repozytorium git (nie ma %s/.git), ale został wskazany format gitdystrybucja źródłanie można łączyć -s%s, odnoszącej się do obsługi źródeł, z -bopcja przetwarzania źródeł -s%s nie jest dopuszczalna z -xpakiet źródłowyformat "%s" pakietu źródłowego nie jest obsługiwany: %spakiet źródłowy ma dwie wartości będące w konflikcie ze sobą - %s i %snazwa pakietu źródłowego "%s" jest nieprawidłowa: "%s"wersja pakietu źródłowegowydanie tylko źródeł (oryginalne źródła dołączone)wydanie tylko źródeł: natywny pakiet Debianawydanie tylko źródeł i różnic (oryginalne źródła NIE dołączone)specjalne prawa dostępu %04o pliku "%s" nie będą dołączone do pliku łatkipoczątek daty zmianyw żadnej z bibliotek nie znaleziono symbolu %s używanego przez %sinformacje o symbolach muszą być poprzedzone nagłówkiem (plik %s, wiersz %s)nieokreślona nazwa symbolu: %sdowiązanie symboliczne do %sbłąd składni w %s w linii %d: %swymaga niepodawania argumentu niebędącego opcjąarchiwum tar "%s" już istnieje, nie będzie nadpisane, rezygnacja - użyj -sU lub -sR, aby nadpisaćbieżąca wersja (%s) jest wcześniejsza od poprzedniej (%s)łatka modyfikuje następujące pliki macierzyste: %swygenerowany plik symboli jest pustynagłówek nie pasuje do oczekiwanego wyrażenia regularnegołatka ma rozmycie, które nie jest dozwolone, lub jest niepoprawnie sformatowanaplik serii (%s) zawiera nieobsługiwane opcje ("%s", wiersz %s) - dpkg-source może zawieść przy nakładaniu łatektrailer nie pasuje do oczekiwanego wyrażenia regularnegonie ma zmian lokalnych do zapisaniaza dużo podstawień - rekursja? - w "%s"próba dwukrotnego połączenia tego samego obiektu (%s) w pliku symbolipodano dwa polecenia: --%s i --%snie można zmienić praw dostępu "%s"nie można zmienić katalogu na "%s"nie można sprawdzić istnienia "%s"nie można określić %snie można wykonać %snie można zachować oryginalnego katalogu (już istnieje)nie można otworzyć pliku informacji o bibliotekach współdzielonych "%s"nie można zmienić nazwy %s na %snie można zmienić nazwy (nowo utworzonego) "%s" na "%s"nie można zmienić nazwy "%s" na "%s"nie można ustalić stanu domniemanego rozpakowanego oryginalnego "%s"cofanie %sniezatwierdzone, nie ignorowane zmiany w katalogu roboczym: %sbezwarunkowe nadpisanie opiekuna dla %sniespodziewany koniec łatki "%s"niezakończona sygnatura OpenPGPnieznane podstawienie %% w hooku: %%%snieznana funkcja %s w zmiennej %s: %snieznana architektura Debiana %s, należy podać również typ systemu GNUnieznany typ systemu GNU %s, należy podać również architekturę Debiananieznany domyślny typ systemu GNU dla architektury Debiana %snieznany typ plikunieznana nazwa hooka %snieznana architektura hosta "%s"nieznane pole informacyjne "%s" w danych wejściowych %snieznane klucz-wartość %snieznana linia z diff -u w %s: "%s"nieznana opcja "%s"niepoprawna opcja lub argument %snierozpoznane wyjście z dpkg --search: "%s"cel rozpakowania istnieje: %srozpakowany oryg. "%s" istnieje, ale nie jest katalogiemrozpakowywanie %snierozpoznane pole zależności "%s"nierozpoznany plik w pakiecie źródłowym %s: %snierozpoznany plik dla natywnego pakietu źródłowego: %snierozpoznany wierszniereprezentowalne zmiany w źródleniewspierana suma kontrolna "%s"nieobsługiwana wersja metadanych quilt: %sniechciany plik binarny: %spliki projektu macierzystego, które zostały zmodyfikowane: %sużycie najnowszego wpisu, który jest wcześniejszy niż określonyużycie najstarszego wpisu, który jest późniejszy niż określonyproszę użyć formatu "3.0 (quilt)", aby otrzymać oddzielne i udokumentowane zmiany w stosunku do plików macierzystych, patrz dpkg-source(1)używanie polecenia-uzysk-praw-admin podczas bycia administratoremużycie opcji z %s: %sużywania formatu źródeł "%s"dostawca %s nie istnieje w %splik dostawcywersja "%s" jest nieprawidłowa: %snumer wersji nie może być pustynumer wersji zawiera niepoprawny znak "%s"numer wersji nie zaczyna się cyfrączekanie na %sostrzeżeniewypisywanie informacji o ominięciach na stderrbłąd zapisu danych kontrolnychzapisywanie na wejściu tarlokalne zmiany można zintegrować za pomocą %smożna podać tylko jedno z "from" i "since", użycie "since"można podać tylko jedno z "to" i "until", użycie "until"nie można łączyć "count" lub "offset" z jakąkolwiek inną opcją zakresunie można używać tagu symver, aby przechwycić niewersjonowane symbole: %s
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/POTFILES dpkg-1.20.7.1/scripts/po/POTFILES
--- dpkg-1.20.7.1-orig/scripts/po/POTFILES	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/POTFILES	2021-06-09 18:24:52.119468572 -0500
@@ -0,0 +1,90 @@
+     ../../scripts/dpkg-architecture.pl \
+     ../../scripts/dpkg-buildflags.pl \
+     ../../scripts/dpkg-buildpackage.pl \
+     ../../scripts/dpkg-checkbuilddeps.pl \
+     ../../scripts/dpkg-distaddfile.pl \
+     ../../scripts/dpkg-genbuildinfo.pl \
+     ../../scripts/dpkg-genchanges.pl \
+     ../../scripts/dpkg-gencontrol.pl \
+     ../../scripts/dpkg-gensymbols.pl \
+     ../../scripts/dpkg-mergechangelogs.pl \
+     ../../scripts/dpkg-name.pl \
+     ../../scripts/dpkg-parsechangelog.pl \
+     ../../scripts/dpkg-scanpackages.pl \
+     ../../scripts/dpkg-scansources.pl \
+     ../../scripts/dpkg-shlibdeps.pl \
+     ../../scripts/dpkg-source.pl \
+     ../../scripts/dpkg-vendor.pl \
+     ../../scripts/Dpkg.pm \
+     ../../scripts/Dpkg/Arch.pm \
+     ../../scripts/Dpkg/BuildFlags.pm \
+     ../../scripts/Dpkg/BuildOptions.pm \
+     ../../scripts/Dpkg/BuildProfiles.pm \
+     ../../scripts/Dpkg/Build/Env.pm \
+     ../../scripts/Dpkg/Build/Info.pm \
+     ../../scripts/Dpkg/Build/Types.pm \
+     ../../scripts/Dpkg/Changelog.pm \
+     ../../scripts/Dpkg/Changelog/Debian.pm \
+     ../../scripts/Dpkg/Changelog/Entry.pm \
+     ../../scripts/Dpkg/Changelog/Entry/Debian.pm \
+     ../../scripts/Dpkg/Changelog/Parse.pm \
+     ../../scripts/Dpkg/Checksums.pm \
+     ../../scripts/Dpkg/Compression.pm \
+     ../../scripts/Dpkg/Compression/FileHandle.pm \
+     ../../scripts/Dpkg/Compression/Process.pm \
+     ../../scripts/Dpkg/Conf.pm \
+     ../../scripts/Dpkg/Control.pm \
+     ../../scripts/Dpkg/Control/Changelog.pm \
+     ../../scripts/Dpkg/Control/Fields.pm \
+     ../../scripts/Dpkg/Control/FieldsCore.pm \
+     ../../scripts/Dpkg/Control/Hash.pm \
+     ../../scripts/Dpkg/Control/HashCore.pm \
+     ../../scripts/Dpkg/Control/Info.pm \
+     ../../scripts/Dpkg/Control/Tests.pm \
+     ../../scripts/Dpkg/Control/Tests/Entry.pm \
+     ../../scripts/Dpkg/Control/Types.pm \
+     ../../scripts/Dpkg/Deps.pm \
+     ../../scripts/Dpkg/Deps/AND.pm \
+     ../../scripts/Dpkg/Deps/KnownFacts.pm \
+     ../../scripts/Dpkg/Deps/Multiple.pm \
+     ../../scripts/Dpkg/Deps/OR.pm \
+     ../../scripts/Dpkg/Deps/Simple.pm \
+     ../../scripts/Dpkg/Deps/Union.pm \
+     ../../scripts/Dpkg/Dist/Files.pm \
+     ../../scripts/Dpkg/ErrorHandling.pm \
+     ../../scripts/Dpkg/Exit.pm \
+     ../../scripts/Dpkg/File.pm \
+     ../../scripts/Dpkg/Getopt.pm \
+     ../../scripts/Dpkg/Gettext.pm \
+     ../../scripts/Dpkg/IPC.pm \
+     ../../scripts/Dpkg/Index.pm \
+     ../../scripts/Dpkg/Interface/Storable.pm \
+     ../../scripts/Dpkg/Lock.pm \
+     ../../scripts/Dpkg/OpenPGP.pm \
+     ../../scripts/Dpkg/Package.pm \
+     ../../scripts/Dpkg/Path.pm \
+     ../../scripts/Dpkg/Shlibs.pm \
+     ../../scripts/Dpkg/Shlibs/Cppfilt.pm \
+     ../../scripts/Dpkg/Shlibs/Objdump.pm \
+     ../../scripts/Dpkg/Shlibs/Symbol.pm \
+     ../../scripts/Dpkg/Shlibs/SymbolFile.pm \
+     ../../scripts/Dpkg/Source/Archive.pm \
+     ../../scripts/Dpkg/Source/Functions.pm \
+     ../../scripts/Dpkg/Source/BinaryFiles.pm \
+     ../../scripts/Dpkg/Source/Package.pm \
+     ../../scripts/Dpkg/Source/Package/V1.pm \
+     ../../scripts/Dpkg/Source/Package/V2.pm \
+     ../../scripts/Dpkg/Source/Package/V3/Bzr.pm \
+     ../../scripts/Dpkg/Source/Package/V3/Custom.pm \
+     ../../scripts/Dpkg/Source/Package/V3/Git.pm \
+     ../../scripts/Dpkg/Source/Package/V3/Native.pm \
+     ../../scripts/Dpkg/Source/Package/V3/Quilt.pm \
+     ../../scripts/Dpkg/Source/Patch.pm \
+     ../../scripts/Dpkg/Source/Quilt.pm \
+     ../../scripts/Dpkg/Substvars.pm \
+     ../../scripts/Dpkg/Vars.pm \
+     ../../scripts/Dpkg/Vendor.pm \
+     ../../scripts/Dpkg/Vendor/Debian.pm \
+     ../../scripts/Dpkg/Vendor/Default.pm \
+     ../../scripts/Dpkg/Vendor/Ubuntu.pm \
+     ../../scripts/Dpkg/Version.pm
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/quot.sed dpkg-1.20.7.1/scripts/po/quot.sed
--- dpkg-1.20.7.1-orig/scripts/po/quot.sed	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/quot.sed	2021-06-09 18:22:47.475275401 -0500
@@ -0,0 +1,6 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/remove-potcdate.sin dpkg-1.20.7.1/scripts/po/remove-potcdate.sin
--- dpkg-1.20.7.1-orig/scripts/po/remove-potcdate.sin	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/remove-potcdate.sin	2021-06-09 18:22:47.475275401 -0500
@@ -0,0 +1,25 @@
+# Sed script that removes the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# Copyright (C) 2002 Free Software Foundation, Inc.
+# Copying and distribution of this file, with or without modification,
+# are permitted in any medium without royalty provided the copyright
+# notice and this notice are preserved.  This file is offered as-is,
+# without any warranty.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/ru.gmo dpkg-1.20.7.1/scripts/po/ru.gmo
--- dpkg-1.20.7.1-orig/scripts/po/ru.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/ru.gmo	2021-06-09 18:25:13.930501865 -0500
@@ -0,0 +1,183 @@
+����i��&|�&'='Q'�e'{( �(J�(@�(-),?);l)"�)�)8�)#*<* D*e*u*�*�*�*!�*(�*#+C+c+}+l�+,(,#E,Ji,�,�,/�,9-&?-f-�-*�-;�-%�-!%.1G.Sy.,�.(�.4#/)X/F�/I�/H0\0m0G0��1Y4'p4B�4(�45@#5<d5��5"Q6It63�6-�6> 75_7��7{�89%9l=9b�;!
>A/>"q>��>)|?#�@(�@)�@TAVrA)�A+�A3BgSB�B,�B8�B1CE=C#�C�C�C�C(�C('DPDmD!�D-�DL�D5'E>]E�E�ES�ES$F,xF'�F�F�F2�F(G:G\XG)�G�G�G'H.H5FH|H�H�H�H�HU�HPIkI�I�I�I�I'�I�I0JJJ!ZJ|J�J�J�J�J�J8�J+K<K![K}K�K)�K�K�KFLFGL�L�L�L�L�L
�L
+MM1M2QM!�M�M�M�M�M*N,7N,dN�N$�N+�NY�N�SO P.@P2oP0�P#�P1�P5)Q
+_Q	jQ(tQ-�Q �Q �Q
RR(6R0_R�R�R6�RS<SDS5XS/�S%�S$�S	T'TET ]T ~T�T)�T�T U)U9UrTU%�U �U=VBLV*�V�V;�V8W
LWZW"xW)�W0�W"�W#X&=XdX)�X<�X �X$Y1Y<MY�YB�Y-�Y!
Z?/ZoZ3�Z:�Z3�Z2[$P[/u[�[�[�[$�[	\' \-H\4v\(�\-�\&]7)]0a]/�]3�]�]?^9N^1�^!�^0�^ 
_9._(h_�_0�_'�_:`%=`c``(�`5�`)�`
+a&a.3aba�a�a�a-�a�a.b=Hb&�b"�b6�bmc"uc'�c4�c4�c*dDd6dd*�dA�de,e:Ae|e�e1�e^�eRLf[�f@�f<g,Wg?�g>�g0h74hlh�h��h&|i/�i�i�ij* j#Kjoj
+{j�j�j
�j�j6�j#
+k.kKkak@zk1�k'�kl
1l2?l1rl<�l�lC�lq7mq�mn./n.^n�n/�n5�n'o*o09o)jo<�o9�op3 pBTp�p
�p!�p�pSq>Uq2�q#�q+�q8roPr,�r$�r.s6As%xs#�s�s%�stt.,t)[t�t-�t�t*�t
u9$u(^u�u�u%�u%�uEvERv:�v�v�v�v2wLw%aw�w�w'�w�w0�w+x"8x-[x1�x�x!�x�x-	y7y*Py7{y5�yj�y*Tzz�z�z�z�z�z.{(F{o{{{�{�{�{+�{=�{;;|Aw|9�|��|@�~4�P�m�������99�us�����D��\�PB�3��yǅ"A�d�0p�7��Eن�6+�4b�;��;ӇW�Lg�<��0��"�-߉P
�J^�~��(�4�OQ�g��0	�[:�-��UČ]�Dx�7��B���8�yՎ9O�[��X�~>�z��}8�!��#ؑ����}�G�Ed�|��N'�6v�����M�"כ=���8�n��^m��̞n`��ϟ?��1ڢ6�C�CR�G��vޫEU�m���	�GگL"��o�u�tw�I�G6��~�����Pĳy������H@�>��MȵL�`c�XĶE�Gc�Q��j���h�������1!�CS�����n�oE�o��#%�4I�~~���M��a�n4���^��U�Gq�\��N�<e�H��%��1�C�4]�8��%��/��5!�PW�k��<�[Q�/��V��%4�.Z�1��)��6��F��c�%��A�DQ�=��U��u*�O��\���M����'��$��)���:�R�r���b��S�Ec�=��+��.�DB�h�����yt�"��M�V_����3j�@��U��A5�Qw�2��N��ZK�����`��q0�0��0���5�UJ�c��4�69�]p���[��*7�Yb�G��9�8>�w�b��H��PA�K��K��d*�P��Q��$2�AW����>N�=��t���@�K��]!�p�~��o�@��D��P�Wf�E��K�EP�@��d��|<�A��Z��`V���7��W�W��=B���N�vO����|R�7��A�^I���I��Z��VV�+��u��eO�x��V.�`��N��a5�h��\�`]�4�����iz�i��RN�h��Q
+��\�e��>G�^��G��{-�R��U��#R�dv����Td�!��!��`��$^�4��;��I��O>�@��L��e�?��1��s���h�JQ�R��M��h=�'��2��U�bW�a���V9�x��5	�F?�d������u�u�:/?jy�n$u��	U��8�\1o�*�')	8Q	O�	G�	"
+<
+BT
+)�
+*�
+:�
+p'W�\�)M:wr��%
N�
>JRj[�b&|���0��2|e�l&�e�wT�(��f��]�3Y;��+)BFlG���N�J�8?jx���sh<@�N�j52�7�7IC,�*�Y�|?8�d�@Z��'& �N \� -D!1r!H�!I�!�7"��"t=#(�#/�#=$jI$3�$M�$.6%Be%<�%6�%j&!�&C�&[�&kI')�'C�'I#(Lm(8�(;�(d/)f�)��)n�*7+?P+5�+#�+0�+=,UY,J�,�,-X1-=�-&�-N�-i>.g�.�/��/Q��T��v
�G'�&7�������U^���^��GO��2)���B���?�
+-"�Bk�m�pS�=�m|�y ������RMEc������z{A��
���F���23��3�j�kK�*;�8\���P�,���g��s�$�r(�"��V��Z��?1����O���Q�M�)�%u@7sfn�Lg�t�q������e
+5x�riJ#]h���	�>e��0	�6��RT�%�1wb�f�=�!�xltD]H:����H��9y����-d����U X[����`F�����vi�/���@*_��4|<,}Ca�9�Y�{��b�$oN���D����h�+��Sa�#�W�!���.;����w`���8�4��/P'5���u:��[�d�_��n�C�&l�IK����A.��Yc��0EI(VJ�>jL���zNW+��X\���q~6pZo��~<}���
+This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+  %s (package says %s, not %s)  new version is %s  old version is %s$ORIGIN is used in RPATH of %s and the corresponding directory could not be identified due to lack of DEBIAN sub-directory in the root of package's build tree%d similar warning has been skipped (use -v to see it)%d other similar warnings have been skipped (use -v to see them all)%s contains an insecure path: %s%s contains an unresolvable reference to symbol %s: it's probably a plugin%s didn't complete in %d second%s didn't complete in %d seconds%s does not exist%s doesn't contain a valid OpenPGP signature%s doesn't contain any information about the source package%s doesn't list any binary package%s doesn't match completely %s%s field contains value %s, but no tests control file %s%s field of package %s: %s file%s has an unexpected SONAME (%s)%s is a symlink%s is a symlink to outside %s%s is empty%s is not a compression level%s is not a plain file%s is not a supported compression%s is not a supported compression method%s is not a supported variable name%s is not a valid option for %s%s is not a valid version%s is not the name of a file%s must be updated to support the 'build-arch' and 'build-indep' targets (at least '%s' seems to be missing)%s needs a parameter%s should be a directory or non-existing%s should be a file or non-existing%s should not be linked against %s (it uses none of the library's symbols)%s(l%s): %s%s(l%s): %s
+LINE: %s'%s' is not supported by the source format '%s''dpkg-deb -I %s control' exited with %d, skipping package'offset' without 'count' has no effect(Use -d flag to override.)--%s needs a directory--%s needs at least one argument, the .dsc--%s needs the .dsc file as first argument, not a directory--%s takes no more than two arguments--target-format option is missing-E and -W are deprecated, they are without effect-b takes at most a directory and an orig source argument (with v1.0 source package)-b takes only one parameter with format '%s'-i%s is deprecated; it is without effect-s%s is deprecated; always using gpg style interface-s%s option overrides earlier -s%s option.orig directory name %s is not <package>-<upstreamversion> (wanted %s).orig.tar name %s is not <package>_<upstreamversion>.orig.tar (wanted %s)<control-file> is the control file to process (default: debian/control).<standard input><standard output>Commands:
+  --is <vendor>           returns true if current vendor is <vendor>.
+  --derives-from <vendor> returns true if current vendor derives from <vendor>.
+  --query <field>         print the content of the vendor-specific field.
+  --help                  show this help message.
+  --version               show the version.Commands:
+  -l, --list                list variables (default).
+  -L, --list-known          list valid architectures (matching some criteria).
+  -e, --equal <arch>        compare with host Debian architecture.
+  -i, --is <arch-wildcard>  match against host Debian architecture.
+  -q, --query <variable>    prints only the value of <variable>.
+  -s, --print-set           print command to set environment variables.
+  -u, --print-unset         print command to unset environment variables.
+  -c, --command <command>   set environment and run the command in it.
+  -?, --help                show this help message.
+      --version             show the version.Debian %s version %s.
+Dependency fields recognized are:
+  %s
+Dpkg::Compression::Process can only start one subprocess at a timeDpkg::Shlibs::Objdump couldn't parse %s
+Enter the desired patch name: File::FcntlLock not available; using flock which is not NFS-safeFormat '3.0 (custom)' is only used to create source packagesNote: libraries are not searched in other binary packages that do not have any shlibs or symbols file.
+To help dpkg-shlibdeps find private libraries, you might need to use -l.OpenPGP signature not allowed hereOptions:
+  --vendor <vendor>       assume <vendor> is the current vendor.Packages in archive but missing from override file:Packages in override file but not in archive:Packages in override file with incorrect old maintainer value:Packages specifying same maintainer as override file:Positional options (order is significant):
+  <executable>             include dependencies for <executable>,
+  -e<executable>           (use -e if <executable> starts with '-')
+  -d<dependency-field>     next executable(s) set shlibs:<dependency-field>.This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Usage: %s [<command>]Usage: %s [<option>...]Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Packages
+
+Options:
+  -t, --type <type>        scan for <type> packages (default is 'deb').
+  -a, --arch <arch>        architecture to scan for.
+  -h, --hash <hash-list>   only generate hashes for the specified list.
+  -m, --multiversion       allow multiple versions of a single package.
+  -e, --extra-override <file>
+                           use extra override file.
+  -M, --medium <medium>    add X-Medium field for dselect multicd access method
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Sources
+
+Options:
+  -n, --no-sort            don't sort by package before outputting.
+  -e, --extra-override <file>
+                           use extra override file.
+  -s, --source-override <file>
+                           use file for additional source overrides, default
+                           is regular override file with .src appended.
+      --debug              turn debugging on.
+  -?, --help               show this help message.
+      --version            show the version.
+
+See the man page for the full documentation.
+Usage: %s [<option>...] <command>Usage: %s [<option>...] <executable>|-e<executable> [<option>...]Usage: %s [<option>...] <file>...
+Usage: %s [<option>...] <filename> <section> <priority>
+
+Options:
+  -f<files-list-file>      write files here instead of debian/files.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <old> <new-a> <new-b> [<out>]
+
+Options:
+  -m, --merge-prereleases  merge pre-releases together, ignores everything
+                           after the last '~' in the version.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] [<command>]Usage: %s [<option>...] [<control-file>]Use --help for program usage information.Version number suggests Ubuntu changes, but Maintainer: does not have Ubuntu addressVersion number suggests Ubuntu changes, but there is no XSBC-Original-Maintainer fieldWrote %s entries to output Packages file.aborting due to --abort-on-upstream-changesaborting due to unexpected upstream changes, see %sadd %s in debian/source/include-binaries if you want to store the modified binary in the debian tarballadding %s to %sadministrative directory '%s' does not existan union dependency can only contain simple dependenciesapplying %sarchitecture %s only allowed on its own (list for package %s is '%s')assuming architecture '%s' for '%s'assuming section '%s' for '%s'bad binary-only value: %sbad key-value after ';': '%s'bad line in substvars file %s at line %dbad package control information for '%s'badly formatted heading linebadly formatted trailer linebadly formatted urgency value: %sbadly formed line in files list file, line %dbinaries to analyze should already be installed in their package's directorybinary and diff upload (original source NOT included)binary build with no binary artifacts found; cannot distributebinary control file %sbinary file contents changedbinary-only arch-indep upload (source code and arch-specific packages not included)binary-only arch-specific upload (source code and arch-indep packages not included)binary-only upload (no source code included)binary-only upload (no source included)block deviceblock lacks the '%s' fieldbuild dependencies/conflicts unsatisfied; abortingbuilding %s in %sbuilding %s using existing %sbuilding a source package without cleaning up as you asked; it might contain undesired filesbuilding source for a binary-only releasebundling: %sbzr status exited nonzerocan't build with source format '%s': %scan't create symlink %scan't extract name and version from library name '%s'can't parse dependency %scan't read directory %s: %scannot change timestamp for %scannot close %scannot combine %s and %scannot continue due to the error abovecannot continue due to the errors listed abovecannot create directory %scannot create directory '%s'cannot find '%s'cannot find an editorcannot fork for %scannot fstat file %scannot install output control file '%s'cannot make %s executablecannot merge symbols from objects without SONAMEcannot mkdir %scannot move '%s' to existing filecannot open %scannot open file %scannot opendir %scannot read %scannot read link %scannot read timestamp from %scannot register changes in %s, this patch already existscannot remove %scannot represent change to %s:cannot represent change to %s: %scannot stat %scannot stat directory %scannot stat directory %s (before removal)cannot stat file %scannot stat orig argument %scannot unpack bzr-format source package because bzr is not in the PATHcannot unpack git-format source package because git is not in the PATHcannot write %scharacter '%s' not allowedcharacter devicechdir to %scheck-command '%s' not foundchild processcloning %sclose on tar inputconflicting checksums '%s' and '%s' for file '%s'conflicting file sizes '%u' and '%u' for file '%s'continued value line not in fieldcontrol info of a .deb packagecontrol informationcopy of the debian directorycouldn't close stdoutcouldn't parse control information from %scouldn't parse dynamic relocation record: %scouldn't parse dynamic symbol definition: %screated directory '%s'creating shallow clone with depth %sdebian/rules is not executable; fixing thatdefault GNU system type %s for Debian arch %s does not match specified GNU system type %sdetected %d unwanted binary file (add it in debian/source/include-binaries to allow its inclusion).detected %d unwanted binary files (add them in debian/source/include-binaries to allow their inclusion).device or socket is not alloweddiff %s modifies file %s through a symlink: %sdiff %s patches file with C-style encoded filenamediff %s removes a non-existing file %s (line %d)diff '%s' doesn't contain any patchdiff '%s' finishes in middle of ---/+++ (line %d)diff '%s' patches something which is not a plain filediff on %sdirectorydirectory argument %s is not a directorydiversions involved - output may be incorrectdoesn't contain a bzr repositorydoesn't contain a git repositorydpkg-genchangesduplicate field %s foundduplicate files in %s source package: %sduplicate files list entry for file %s (line %d)entry in dpkg's status fileentry in repository's %s fileepoch part of the version number is not a number: '%s'errorexecutable mode %04o of '%s' will not be represented in diffexpected %s, got %sexpected OpenPGP signature, found something else '%s'expected [ +-] at start of line %d of diff '%s'expected ^--- in line %d of diff '%s'expected ^@@ at line %d of diff '%s'extracting %s in %sextracting unsigned source package (%s)failed to copy %s to %sfailed to get a write lock on %sfailed to parse a line in %s: %sfailed to parse line in %s: %sfailed to rename newly-extracted %s to %sfailed to rename saved %s to %sfailed to verify signature on %sfailed to writefailed when writing stdoutfakeroot not found, either install the fakeroot
+package, specify a command with the -r option, or run this as rootfatal error occurred while parsing %sfield cannot start with a hyphenfile %s has checksum %s instead of expected %s (algorithm %s)file %s has no final newline (either original or modified version)file %s has size %u instead of expected %ufile arguments need to existfile removal without proper filename in diff '%s' (line %d)filename, section and priority may contain no whitespacefirst headingformat v3.0 (git) expected %sformat v3.0 (git) unknown file: %sformat v3.0 (git) uses only one .git fileformat v3.0 (git) uses only one .gitshallow filefound blank line where expected %sfound change data where expected %sfound start of entry where expected %sfound trailer where expected %sfull upload (original source is included)full upload; Debian-native package (full source is included)gain-root-command '%s' not foundgeneral section of control info filegit ls-files exited nonzerogit repository %s uses submodules; this is not yet supportedhost architectureif patch '%s' is correctly applied by quilt, use '%s' to update itignoring -sd option for native Debian packageignoring deletion of directory %signoring deletion of file %s, use --include-removal to overrideignoring deletion of symlink %signoring duplicate override entry for %s at line %dignoring duplicate source override entry for %s at line %dignoring override entry for %s, invalid priority %sillegal package name '%s': %sincluding full source code in uploadincorrect value in %s option of %s variable: %sinfoinstall new files list fileinstall new varlist file '%s'invalid dependency got generated: %sinvalid flag in %s: %sinvalid line in %s checksums string: %sinvalid override entry at line %d (%d fields)invalid source override entry at line %d (%d fields)invalid syntax for option in %s, line %dline %d of %s is invalid, it has been ignoredline %d of %s mentions unknown flag %sline after --- isn't as expected in diff '%s' (line %d)line with unknown format (not field-colon-value)local changes detected, the modified files are:local changes have been recorded in a new patch: %smay not be empty stringmismatched addon orig.tar %s for signature %s in source packagemismatched orig.tar %s for signature %s in source packagemissing Priority for binary package %s; using '-'missing Priority for source filesmissing Section for binary package %s; using '-'missing Section for source filesmissing addon orig.tar for signature %s in source packagemissing critical source control field %smissing hook %s commandmissing information for critical output field %smissing information for output field %smissing orig.tar or debian.tar file in v2.0 source packagemkdir can be used to create directorymore change data or trailermoved '%s' to '%s'multiple tarfiles in v1.0 source packagemust specify package since control info has many (%s)must start with an alphanumeric characternamed pipenamed socketnative package version may not have a revisionnative package with .orig.tarneed an action optionneed at least a filenameneed at least one executableneed exactly a filename, section and priorityneeds at least three argumentsnew libraries appeared in the symbols file: %snewly created empty file '%s' will not be represented in diffno Package field in control file of %sno binary packages specified in %sno debian/symbols file used as basis for generating %sno dependency information found for %s (used by %s)
+Hint: check if the library actually comes from a package.no files indicated on command lineno package stanza found in control infono source format specified in %s, see dpkg-source(1)no such directory '%s', try --create-dir (-c) optionno tarfile in Files fieldno upstream tarball found at %snon-native package version does not contain a revisionnone found, starting from the oldest entrynone of the filenames in ---/+++ are valid in diff '%s' (line %d)nonexistentnot including original source code in uploadnot signing UNRELEASED build; use --force-sign to overrideone to three arguments expectedonly supports gzip compressionorig argument %s is not a plain file or directoryorig argument is empty (means no orig, no diff) but source handling style -s%s wants somethingorig argument is packed but source handling style -s%s calls for unpacked (.orig/)orig argument is unpacked but source handling style -s%s calls for packed (.orig.tar.<ext>)original and modified files are /dev/null in diff '%s' (line %d)override file %s not foundpackage %s (filename %s) has Filename field!package %s has priority %s in control file but %s in files listpackage %s has section %s in control file but %s in files listpackage %s in control file but not in files listpackage %s listed in files list but not in control infopackage %s not in control infopackage %s: package could avoid a useless dependency if %s was not linked against %s (it uses none of the library's symbols)package could avoid a useless dependency if %s were not linked against %s (they use none of the library's symbols)package's section of control info filepacked orig '%s' exists but is not a plain fileparse changes fileparsed version of changelogpatch file '%s' doesn't existpatches are not applied, applying them nowpattern '%s' did not match any filepipe for %splain fileremove patch backup file %sreopen stdinreopen stdoutrepeated key-value %srequired removal of '%s' installed by original tarballrestoring quilt backup files for %srm -rf failed to remove '%s'see diff output belowsetting up shallow cloneseveral orig.tar files found (%s and %s) but only one is allowedshared libs info file '%s' line %d: bad line '%s'short option not allowed in %s, line %dsign-command '%s' not foundskipping '%s'some libraries disappeared in the symbols file: %ssome new symbols appeared in the symbols file: %ssome symbols or patterns disappeared in the symbols file: %ssource changed bysource directory '%s' is not <sourcepackage>-<upstreamversion> '%s'source directory is not the top directory of a bzr repository (%s/.bzr not present), but Format bzr was specifiedsource directory is not the top directory of a git repository (%s/.git not present), but Format git was specifiedsource distributionsource handling style -s%s not allowed with -bsource handling style -s%s not allowed with -xsource packagesource package format '%s' is not supported: %ssource package has two conflicting values - %s and %ssource package name '%s' is illegal: %ssource versionsource-only upload (original source is included)source-only upload: Debian-native packagesource-only, diff-only upload (original source NOT included)special mode %04o of '%s' will not be represented in diffstart of change datasymbol %s used by %s found in none of the librariessymbol information must be preceded by a header (file %s, line %s)symbol name unspecified: %ssymlink to %ssyntax error in %s at line %d: %stakes no non-option argumentstarfile '%s' already exists, not overwriting, giving up; use -sU or -sR to overridethe current version (%s) is earlier than the previous one (%s)the diff modifies the following upstream files: %sthe generated symbols file is emptythe header doesn't match the expected regexthe patch has fuzz which is not allowed, or is malformedthe series file (%s) contains unsupported options ('%s', line %s); dpkg-source might fail when applying patchesthe trailer doesn't match the expected regexthere are no local changes to recordtoo many substitutions - recursive ? - in '%s'tried to merge the same object (%s) twice in a symfiletwo commands specified: --%s and --%sunable to change permission of '%s'unable to chdir to '%s'unable to check for existence of '%s'unable to determine %sunable to execute %sunable to keep orig directory (already exists)unable to open shared libs info file '%s'unable to rename %s to %sunable to rename '%s' (newly created) to '%s'unable to rename '%s' to '%s'unable to stat putative unpacked orig '%s'unapplying %suncommitted, not-ignored changes in working directory: %sunconditional maintainer override for %sunexpected end of diff '%s'unfinished OpenPGP signatureunknown %% substitution in hook: %%%sunknown %s feature in %s variable: %sunknown Debian architecture %s, you must specify GNU system type, toounknown GNU system type %s, you must specify Debian architecture, toounknown default GNU system type for Debian architecture %sunknown file typeunknown hook name %sunknown host architecture '%s'unknown information field '%s' in input data in %sunknown key-value %sunknown line from diff -u on %s: '%s'unknown option '%s'unknown option or argument %sunknown output from dpkg --search: '%s'unpack target exists: %sunpacked orig '%s' exists but is not a directoryunpacking %sunrecognized dependency field '%s'unrecognized file for a %s source package: %sunrecognized file for a native source package: %sunrecognized lineunrepresentable changes to sourceunsupported checksum '%s'unsupported version of the quilt metadata: %sunwanted binary file: %supstream files that have been modified: %suse newest entry that is earlier than the one specifieduse oldest entry that is later than the one specifieduse the '3.0 (quilt)' format to have separate and documented changes to upstream files, see dpkg-source(1)using a gain-root-command while being rootusing options from %s: %susing source format '%s'vendor %s doesn't exist in %svendor fileversion '%s' is invalid: %sversion number cannot be emptyversion number contains illegal character '%s'version number does not start with digitwait for %swarningwrite diversion info to stderrwrite error on control datawrite on tar inputyou can integrate the local changes with %syou can only specify one of 'from' and 'since', using 'since'you can only specify one of 'to' and 'until', using 'until'you can't combine 'count' or 'offset' with any other range optionyou can't use symver tag to catch unversioned symbols: %sProject-Id-Version: dpkg-dev 1.17.23
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2015-04-07 07:02+0200
+Last-Translator: Yuri Kozlov <yuray@komyakino.ru>
+Language-Team: Russian <debian-l10n-russian@lists.debian.org>
+Language: ru
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+X-Generator: Lokalize 1.5
+Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n%10<=4 && (n%100<10 || n%100>=20) ? 1 : 2);
+
+Это свободное программное обеспечение. См. условия распространения в
+Универсальной общественной лицензии GNU версии 2 или более поздней.
+НИКАКИЕ гарантии не предоставляются.
+  %s (в пакете указано %s, а не %s)  новая версия %s  старая версия %s$ORIGIN используется в RPATH (%s) и соответствующий каталог невозможно определить из-за отсутствия подкаталога DEBIAN в корне дерева сборки пакета%d похожее предупреждение было пропущено (используйте -v, чтобы увидеть его)%d других похожих предупреждения было пропущено (используйте -v, чтобы увидеть их)%d других похожих предупреждений было пропущено (используйте -v, чтобы увидеть их)%s содержит небезопасный путь: %s%s содержит неразрешимую ссылку на символ %s: вероятно, это модуль%s не завершится за %d секунду%s не завершится за %d секунды%s не завершится за %d секунд%s не существует%s не содержит корректной подписи OpenPGP%s не содержит информации о пакете с исходным кодомв «%s» отсутствует какой-либо двоичный пакет%s совпадает с %s не полностьюполе %s содержит значение %s, но не проверяется управляющим файлом %s%s поле из пакета %s: файл %s%s имеет неожидаемый SONAME (%s)%s является символьной ссылкой%s является символьной ссылкой вовне %s%s пуст%s не является степенью сжатия%s не является простым файломнеподдерживаемый метод сжатия %sнеподдерживаемый метод сжатия %s%s не является поддерживаемым именем переменной%s не является допустимым параметром для %s%s не является допустимой версией%s не является именем файладля поддержки целей «build-arch» и «build-indep» требуется обновить %s (во всяком случае, будет отсутствовать «%s»)для %s требуется параметр%s должен быть каталогом или не существовать%s должен быть файлом или не существовать%s не должен компоноваться с %s (не используется ни один из её символов)%s(l%s): %s%s(l%s): %s
+СТРОКА: %s«%s» не поддерживается форматом исходника %s«dpkg-deb -I %s control» завершилась с кодом %d, пакет пропускается«offset» без «count» бесполезен(Используйте параметр -d, чтобы продолжить сборку.)для --%s требуется каталог--%s требует указания хотя бы одного значения .dsc--%s принимает .dsc файл первым значением, а не каталог--%s может иметь не более двух значенийотсутствует параметр --target-format-E и -W устарели, они ничего не изменятзначением параметра -b является только каталог и orig исходник (для исходника пакета v1.0)значением параметра -b является только один аргумент в формате «%s»-i%s устарел, ничего не изменится-s%s устарел; всегда используется интерфейс как у gpgпараметр -s%s заменит ранее указанный параметр -s%sимя каталога .orig %s не в виде <пакет>-<оригинальная версия> (требуется %s)имя .orig.tar %s не в виде <пакет>_<оригинальная версия>.orig.tar (требуется %s)<управ.файл> это файл управления ходом работы (по умолчанию: debian/control).<стандартный ввод><стандартный вывод>Команды:
+  --is <поставщик>            вернуть true, если текущий
+                              поставщик — <поставщик>
+  --derives-from <поставщик>  вернуть true, если текущий поставщик происходит
+                              от <поставщика>
+  --query <поле>              показать содержимое поле, определённое
+                              поставщиком
+  --help                  показать это сообщение
+  --version               показать версиюКоманды:
+  -l, --list                вывести список переменных (действие по умолчанию)
+  -L, --list-known          вывести список корректных архитектур
+                            (подходящих под некоторый критерий).
+  -e, --equal <арх>         сравнить с архитектурой текущего узла Debian
+  -i, --is <шаблон-арх>     проверить, совпадает ли архитектура текущего
+                            узла Debian с шаблоном
+  -q, --query <переменная>  показать значение только <переменной>
+  -s, --print-set           показать команду для установки переменных окружения
+  -u, --print-unset         показать команду для сброса переменных окружения
+  -c, --command <команда>   настроить окружение и запустить в нём команду
+  -?, --help                показать это сообщение
+  --version                 показать версиюDebian %s, версия %s.
+Распознаваемые поля зависимостей:
+  %s
+Dpkg::Compression::Process может запускать только один подпроцесс одновременноDpkg::Shlibs::Objdump не удалось проанализировать %s
+Введите желаемое имя заплаты:File::FcntlLock недоступна; используется flock, которую небезопасно использовать при работе с NFSФормат «3.0 (custom)» используется только для создания пакетов с исходным кодомЗамечание: библиотеки не ищутся в других двоичных пакетах, в которых нет файла shlibs или symbols. Чтобы помочь dpkg-shlibdeps
+найти персональные библиотеки, используйте -l.подпись OpenPGP здесь не допускаетсяПараметры:
+  --vendor <поставщик>        предполагать, что <поставщик> является текущим
+                              поставщикомПакеты есть в архиве, но отсутствуют в файле переназначений:Пакеты есть в файле переназначений, но нет в архиве:Пакеты в файле переназначений с неправильным старым значением сопровождающего:Пакеты с тем же сопровождающим что и в файле переназначений:Позиционные параметры (порядок важен):
+  <исп.файл>               включить все зависимости для <исп.файла>,
+  -e<исп.файл>             (используйте -e, если <исп.файл> начинается с «-»)
+  -d<поле-завис.>          для последующих исп.файлов
+                           задать в shlibs:<поле-завис.>Это свободное программное обеспечение. См. условия распространения в
+Универсальной общественной лицензии GNU версии 2 или более поздней.
+НИКАКИЕ гарантии не предоставляются.
+Использование: %s [<команда>]Использование: %s [<параметр>...]Использование: %s [<параметр> ...] <каталог_двоичн_пакетов>
+                    [<файл_переназначений> [<префикс_пути>]] > Packages
+
+Параметры:
+  -t, --type <тип>       искать пакеты указанного <типа>(по умолчанию «deb»)
+  -a, --arch <арх.>      сканируемая архитектура
+  -h, --hash <hash-list> генерировать хэши то по заданному списку
+  -m, --multiversion     разрешить несколько версий одного пакета
+  -e, --extra-override <файл>
+                         использовать файл дополнительный файл переназначений
+  -M, --medium <medium>  добавить поле X-Medium для метода
+                         доступа dselect multicd
+  -?, --help             показать это сообщение
+      --version          показать версию
+Использование: %s [<параметр> ...] <кат.двоичн.пакетов>
+               [<файл_переназначений> [<префикс_пути>]] > Sources
+
+Параметры:
+  -n, --no-sort          не сортировать по имени пакета перед выводом
+  -e, --extra-override <файл>
+                         использовать дополнительный файл переназначений
+  -s, --source-override <файл>
+                         использовать файл для дополнительных
+                         переназначений исходников, по умолчанию
+                         это обычный файл переназначений с добавленным src
+      --debug            включить отладку
+ -?, --help              показать это сообщение
+      --version          показать версию
+
+В справочной странице доступна полная документация.
+Использование: %s [<параметр>...] <команда>Использование: %s [<параметр> ...] <исп.файл>|-e<исп.файл> [<параметр> ...]Использование: %s [<параметр>...] <файл>...
+Использование: %s [<параметр>...] <имя_файла> <секция> <приоритет>
+
+Параметры:
+  -f<файл-списка>        записать файлы в ук. файл, а не в debian/files
+  -?, --help               показать это сообщение
+      --version            показать версию
+Использование: %s [<параметр>...] <старый> <новый-а> <новый-б> [<вывод>]
+
+Параметры:
+  -m, --merge-prereleases  объединить пред-выпуски вместе, игнорировать всё
+                           после последнего «~» в версии
+  -?, --help               показать это сообщение
+      --version            показать версию
+Использование: %s [<параметр>...] <команда>Использование: %s [<параметр>...] <управ.файл>Для получения информации по использованию программы используйте параметр --help.Номер Version предполагает изменения Ubuntu, но в Maintainer: нет адреса UbuntuНомер Version предполагает изменения Ubuntu, но нет поля XSBC-Original-MaintainerЗаписано %s записей в выходной файл Packages.прерывание работы из-за --abort-on-upstream-changesпрерывание работы из-за неожиданных изменений авторского кода, смотрите %sдобавьте %s в debian/source/include-binaries, если хотите хранить изменённый двоичный файл в debian tarballдобавляется %s в %sадминистративный каталог «%s» не существуетв объединяющей зависимости могут быть только простые зависимостинакладывается %sархитектура %s должна быть только из указанных в пакете (список для пакета %s: «%s»)предполагается архитектура «%s» для «%s»предполагается раздел «%s» для «%s»нежелательный только двоичное значение: %sневерная пара ключ-значение после «;»: «%s»неправильная строка в файле подстановок %s у строки %dнеправильная управляющая информация пакета «%s»неправильный формат строки заголовканеправильный формат строки завершениянеправильный формат значения критичности: %sневерный формат строки в файле со списком файлов, строка %dанализируемые двоичные файлы должны быть уже установлены в свои каталоги пакетовзакачка только двоичных пакетов и diff (без пакетов оригинального исходного кода)обнаружена двоичная сборка без двоичных пакетов; распространение невозможнодвоичный файл управления %sсодержимое двоичного файла измененозакачка только двоичных, независящих от архитектуры, пакетов (без пакетов исходного кода и зависимых от архитектуры)закачка только двоичных, зависящих от архитектуры, пакетов (без пакетов исходного кода и независимых от архитектуры)закачка только двоичных пакетов (без пакетов исходного кода)закачка только двоичных пакетов (без пакетов исходного кода)блочное устройствов блоке отсутствует поле «%s»неудовлетворительные зависимости/конфликты при сборке; прерываемсясборка %s в %sсборка %s с использованием существующего %sсборка пакета исходного кода без предварительной очистки по вашему запросу; могут добавиться нежелательные файлысборка пакета с исходным кодом только для двоичного выпускаувязывание: %sкоманда bzr status завершилась с ненулевым кодом выходаневозможно собрать с форматом исходника «%s»: %sне удалось создать символьную ссылку %sне удалось выделить имя и версию из библиотеки «%s»не удалось проанализировать зависимость %sне удалось прочитать каталог %s: %sне удалось изменить метку времени для %sне удалось закрыть %sне удалось объединить %s и %sневозможно продолжать из-за ошибки, указанной вышеневозможно продолжать из-за ошибок, указанных вышеневозможно продолжать из-за ошибок, указанных вышене удалось создать каталог %sне удалось создать каталог «%s»не удалось найти «%s»не удалось найти редакторне удалось выполнить fork для %sне удалось выполнить функцию fstat для файла %sне удалось установить новый выходной управляющий файл «%s»не удалось сделать %s исполняемымне удалось объединить символы из объектов без SONAMEне удалось выполнить mkdir %sне удалось переместить «%s» в существующий файлне удалось открыть %sне удалось открыть файл %sне удалось выполнить opendir %sне удалось прочитать %sне удалось прочитать ссылку %sне удалось изменить метку времени из %sневозможно зарегистрировать изменения в %s, такая заплата уже существуетне удалось удалить %sне удалось представить изменение %s:не удалось представить изменение %s: %sне удалось выполнить функцию stat %sне удалось выполнить функцию stat для каталога %sне удалось выполнить функцию stat для каталога %s (перед удалением)не удалось выполнить функцию stat для файла %sне удалось выполнить функцию stat для orig параметра %sневозможно распаковать пакет с исходным кодом в формате bzr, так как bzr отсутствует в PATHневозможно распаковать пакет с исходным кодом в формате git, так как git отсутствует в PATHне удалось записать %sсимвол «%s» запрещёнсимвольное устройствовызов chdir в %sкоманда-проверки «%s» не найденадочерний процессклонируется %sзакрытие ввода tarнесовпадение контрольных сумм «%s» и «%s» для файла «%s»несовпадение размеров «%u» и «%u» для файла «%s»продолжение строки значения не в полеуправляющая информация пакета .debуправляющая информациякопирование каталога debianне удалось закрыть стандартный выводне удалось проанализировать управляющую информацию из %sне удалось проанализировать запись динамического перераспределения: %sне удалось проанализировать определение динамического символа: %sсоздан каталог «%s»создаётся поверхностный клон с глубиной %sdebian/rules не является исполняемым; исправляем этосистемный тип GNU по умолчанию %s для архитектуры Debian %s не совпадает с указанным системный типом GNU %sобнаружен %d нежелательный двоичный файл (чтобы разрешить включение, добавьте его в debian/source/include-binaries).обнаружено %d нежелательных двоичных файла (чтобы разрешить включение, добавьте их в debian/source/include-binaries).обнаружено %d нежелательных двоичных файлов (чтобы разрешить включение, добавьте их в debian/source/include-binaries).устройства или сокеты не разрешеныdiff %s изменяет файл %s через символьную ссылку: %sфайл заплат diff «%s» с именем в стиле Cdiff %s удаляет несуществующий файл %s (строка %d)diff «%s» не содержит заплаткиdiff «%s» завершился в середине ---/+++ (строка %d)diff «%s» латает что-то не являющееся простым файломвызов diff для %sкаталогзначение параметра каталога %s не является каталогомзадействованы отклонения - результат может быть неправильнымне содержит репозитория bzrне содержит репозитория gitdpkg-genchangesобнаружено повторение поля %sповторение файла в пакете с исходным кодом %s: %sповторная запись в списке файлов для файла %s (строка %d)элемент в файле состояния dpkgэлемент в файле репозитория %sчасть эпохи в номере версии не является числом: «%s»ошибкаправа исполнения %04o для «%s» не будут включёны в diffожидалось %s, получено %sожидалась подпись OpenPGP, найдено что-то другое «%s»ожидается [ +-] в начале строки %d в diff «%s»ожидается ^--- в строке %d в diff «%s»ожидается ^@@ в строке %d в diff «%s»извлечение %s в %sраспаковка неподписанного пакета с исходным кодом (%s)копирование %s в %s завершилось с ошибкойошибка при получении блокировки %s на записьне удалось проанализировать строку в %s: %sне удалось проанализировать строку в %s: %sотказ при переименовании только что извлечённого %s в %sотказ при переименовании сохранённого %s в %sпроверка подписи для %s завершилась неудачноне удалось записатьсбой при записи в стандартный выводfakeroot не найдена, установите пакет fakeroot и
+запускайте команду с параметром -r, или запускайте её от rootнеустранимая ошибка при анализе %sполе не может начинаться с дефисафайл %s имеет контрольную сумму %s вместо ожидаемой %s (алгоритм %s)файл %s не завершается символом новой строки (оригинальная или изменённая версия)файл %s имеет размер %u вместо ожидаемого %uфайлы, указанные в параметрах, должны существоватьудаление файла без правильного имени файла в diff «%s» (строка %d)имя файла, секция и приоритет не могут содержать пробельных символовпервый заголовоксогласно формату v3.0 (git) ожидается %sнеизвестный файл для формата v3.0 (git): %sв формате v3.0 (git) используется только файл .gitв формате v3.0 (git) используется только файл .gitshallowнайдена пустая строка где ожидалось %sнайдены данные изменений где ожидалось %sнайдено начало записи где ожидалось %sнайдено завершение где ожидалось %sзакачка всего (с пакетом оригинального исходного кода)закачка всего; родной пакет Debian (включены все пакеты исходного кода)команда-получения-root «%s» не найденаобщая секция управляющего информационного файлакоманда git ls-files завершилась с ненулевым кодом выходав репозитории git %s используются субмодули; это пока не поддерживаетсяархитектура узлаесли заплата «%s» корректно накладывается quilt, используйте «%s» для её обновленияигнорируется параметр -sd для родного пакета Debianигнорируется удаление каталога %sигнорируется удаление файла %s, для преодоления используйте --include-removalигнорируется удаление символьной ссылки %sигнорируется дублирующая запись переназначения для %s в строке %dигнорирование дублирующей записи переназначения исходника для %s в строке %dигнорируется запись переназначения для %s; неправильный приоритет %sнедопустимое имя пакета «%s»: %sв закачку включён весь исходный коднекорректное значение в параметре %s переменной %s: %sинфоустановка нового файла с списком файловустановка нового файла со списком переменных «%s»при генерации получена неверная зависимость: %sнеправильный флаг в %s: %sнеправильная строка в строковом значении контрольной суммы %s: %sнеправильная запись переназначения в строке %d (%d полей)неправильная запись переназначения исходника в строке %d (%d полей)синтаксическая ошибка в параметре у %s, строка %dнеправильная строка %d из %s, она была проигнорированав строке %d из %s упомянут неизвестный флаг %sстрока после --- не та, что ожидалась в diff «%s» (строка %d)строка неизвестного формата (не поле-двоеточие-значение)обнаружены локальные изменения, изменённые файлы:локальные изменения были записаны в новую заплату: %sне может быть пустой строкойв пакете с исходным кодом не совпадает дополнительный orig.tar %s с подписью %sв пакете с исходным кодом не совпадает orig.tar %s с подписью %sотсутствует Priority для двоичного пакета %s; используется «-»отсутствует Priority для файлов с исходным кодомотсутствует Section для двоичного пакета %s; используется «-»отсутствует Section для файлов с исходным кодомв пакете с исходным кодом отсутствует дополнительный orig.tar для подписи %sотсутствует критическое управляющее поле исходников %sотсутствует команда для ловушки %sотсутствует информация о критическом поле вывода %sотсутствует информация о поле вывода %sотсутствует файл orig.tar или debian.tar в пакете с исходным кодом версии v2.0для создания каталога можно использовать mkdirпродолжение данных об изменениях или концевик«%s» перемещён в «%s»несколько tar-файлов в пакете с исходным кодом версии v1.0должен быть указан пакет, так как в управляющей информации их несколько (%s)должно начинаться с латинской буквы или цифрыименованный каналименованный сокетв версии родного пакета может отсутствовать ревизияродной пакет с .orig.tarнеобходим параметр действиятребуется хотя бы одно имя файлатребуется хотя бы один исполняемый файлнужно указать имя файла, секцию и приоритеттребуется не менее трёх аргументовпоявились новые библиотеки в файле symbols: %sнедавно созданный пустой файл «%s» не будет включён в diffнет поля Package в управляющем файле %sне задано двоичное поле в %sфайл debian/symbols не используется в качестве основы для генерации %sинформация о зависимостях не найдена для %s (используется %s)
+Подсказка: проверьте, действительно ли библиотеки из этого пакета.нет файлов, указанных в командной строкестроки о пакете нет в управляющей информациине задан формат исходников в %s, см. dpkg-source(1)каталог «%s» не существует, попробуйте параметр --create-dir (-c)нет tar-файла в поле Filesавторский tarball не найден в %sв версии неродного пакета отсутствует ревизияничего не найдено, начинаем с самого старого элементавсе имена файлов в ---/+++ некорректны в diff «%s» (строка %d)несуществующийв закачку не включён оригинальный исходный кодсборка UNRELEASED не подписывается; чтобы изменить используйте --force-signожидается от 1 до 3 аргументовподдерживается только метод сжатия gziporig параметр %s не является обычным файлом или каталогомorig параметр пуст (то есть не orig и не diff), но указана команда что-то сделать -s%sorig параметр упакован, но вызываются методы -s%s как для распакованных исходников (.orig/)orig параметр распакован, но вызываются методы -s%s как для упакованных исходников (.orig.tar.<расш>)оригинальный и изменённый файлы равны /dev/null для diff «%s» (строка %d)файл переназначений %s не найденпакет %s (файл %s) содержит поле Filename!пакет %s имеет приоритет %s в управляющем файле, но %s в списке файловпакет %s в секции %s в управляющем файле, но в %s в списке файловпакет %s в управляющем файле, но его нет в файле со списком файловпакет %s есть в файле со списком файлов, но его нет в управляющей информациипакета %s отсутствует в управляющей информациипакет %s: у пакета %s можно удалить бесполезную зависимость от %s, если исключить её из компоновки (так как не используется ни одного из её библиотечных символов)у пакета %s можно удалить бесполезные зависимости от %s, если исключить их из компоновки (так как не используется ни одного из их библиотечных символов)у пакета %s можно удалить бесполезные зависимости от %s, если исключить их из компоновки (так как не используется ни одного из их библиотечных символов)секция пакета управляющего информационного файлаупакованный orig «%s» существует, но не является простым файломразбор файла измененийполучена версия changelogфайл заплаты «%s» не существуетзаплаты не были наложены, делаем это сейчаспод шаблон «%s» не подходит ни один файлвызов pipe для %sпростой файлудаление резервной копии заплатки %sповторное открытие stdinповторное открытие stdoutповторение пары ключ-значение %sтребуется удаление «%s», установленного из оригинального tarballвосстановление резервных копий файлов quilt для %sпри удалении «%s» команда rm -rf завершилась неудачносмотрите вывод diff ниженастройка поверхностного клонанайдено несколько файлов orig.tar (%s и %s), но может быть только одининформационный файл разделяемой библиотеки «%s» строка %d: неправильная строка «%s»короткий параметр не разрешён в %s, строка %dкоманда-подписания «%s» не найденапропускается «%s»некоторые библиотеки исчезли из файла symbols: %sпоявилось несколько новых символов в файле symbols: %sнекоторые символы или шаблоны исчезли из файла symbols: %sисходный код изменёнкаталог исходников «%s» не в виде <пакет исходников>-<оригинальная версия> «%s»исходный каталог не является начальным каталогом репозитория bzr (нет %s/.bzr), но указан Format bzrисходный каталог не является начальным каталогом репозитория git (нет %s/.git), но указан Format gitдистрибутив исходного кодатип работы с исходниками -s%s нельзя указывать вместе с -bуказывать обработчик исходников -s%s не разрешено вместе с -xпакет исходного кодаформат пакета с исходным кодом «%s» не поддерживается: %sпакет с исходным кодом содержит два конфликтующих значения: %s и %sимя пакета с исходным кодом «%s» некорректно: %sверсия исходного кодазакачка только пакета исходного кода и diff (с пакетом оригинального исходного кода)закачка только пакетов исходного кода: родной пакет Debianзакачка только пакета исходного кода и diff (пакет оригинального исходного кода НЕ включён)специальные права %04o для «%s» не будут включёны в diffначало данных об измененияхсимвол %s, используемый %s, в библиотеках не найденсимвольная информация должна начинаться с заголовка (файл %s, строка %s)не задано имя символа: %sсимвольная ссылка на %sсинтаксическая ошибка в %s в строке %d: %sне принимает необязательные параметрыtar-файл «%s» уже существует, не перезаписывается, останов; используйте -sU или -sR для перезаписитекущая версия (%s) меньше чем предыдущая (%s)diff изменяет следующие авторские файлы: %sсгенерированный файл symbols пустзаголовок не подходит под ожидаемое регулярное выражениезаплата содержит неточность (fuzz), что запрещено, или имеет некорректный форматфайл series (%s) содержит неподдерживаемые параметры («%s», строка %s), у dpkg-source может не получиться наложить заплатыконцевик не подходит под ожидаемое регулярное выражениенет локальных изменений для записислишком много подстановок (рекурсия?) в «%s»попытка объединить один объект (%s) дважды в файле символовуказаны две команды: --%s и --%sневозможно изменить права «%s»невозможно выполнить chdir в «%s»невозможно проверить существование «%s»невозможно определить %sневозможно выполнить %sневозможно сохранить orig каталог (уже существует)невозможно открыть информационный файл разделяемой библиотеки «%s»невозможно переименовать %s в %sневозможно переименовать «%s» (недавно созданный) в «%s»невозможно переименовать «%s» в «%s»невозможно выполнить функцию stat для предполагаемого распакованного orig «%s»отмена наложений на %sне сохранено в главный репозиторий, неигнорируемые изменения в рабочем каталоге: %sбезусловное переназначение сопровождающего для %sнеожиданный конец diff «%s»незаконченная подпись OpenPGPнеизвестная подстановка %% в ловушке: %%%sнеизвестное свойство %s в переменной %s: %sнеизвестная архитектура Debian %s, также вы должны указать системный тип GNUнеизвестный системный тип GNU %s, также вы должны указать архитектуру Debianнеизвестный системный тип GNU по умолчанию для архитектуры Debian %sнеизвестный тип файланеизвестное имя ловушки %sнеизвестная архитектура узла «%s»неизвестное информационное поле «%s» во входных данных в %sнеизвестный ключ-значение %sнеизвестная строка в выводе diff -u для %s: «%s»неизвестный параметр «%s»неизвестный параметр или аргумент %sнеизвестный вывод от dpkg --search: «%s»цель распаковки существует: %sсуществует распакованный orig «%s», но не является каталогомраспаковывается %sнераспознанное поле зависимости «%s»нераспознанный файл в пакете с исходным кодом %s: %sнераспознанный файл для родного пакета с исходным кодом: %sнераспознанная строканехарактерные изменения в исходникенеподдерживаемая контрольная сумма «%s»неподдерживаемая версия метаданных quilt: %sнежелательный двоичный файл: %sавторские файлы были изменены: %sиспользуемый самый новый элемент меньше чем указанныйиспользуемый самый старый элемент больше чем указанныйиспользуется формат «3.0 (quilt)» для разделения и описания изменений авторских файлов, см dpkg-source(1)используется команда получения прав root, но уже есть права rootиспользуются параметры из %s: %sиспользуется формат исходника «%s»поставщик %s не существует в %sфайл производителянекорректная версия «%s»: %sномер версии не может быть пустымномер версии содержит недопустимый символ «%s»номер версии не может начинаться с цифрывызов wait для %sпредупреждениезапись информации об отклонениях в поток ошибокошибка записи управляющих данныхвызов write для ввода tarвы можете встроить локальные изменения в %sможно указать только одно «from» и «since», используется «since»можно указать только одно «to» и «until», используется «until»нельзя использовать «count» или «offset» одновременно с любыми другими параметрами диапазонавы не можете использовать метку symver для обнаружения неверсионных символов: %s
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/Rules-quot dpkg-1.20.7.1/scripts/po/Rules-quot
--- dpkg-1.20.7.1-orig/scripts/po/Rules-quot	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/Rules-quot	2021-06-09 18:22:47.475275401 -0500
@@ -0,0 +1,62 @@
+# Special Makefile rules for English message catalogs with quotation marks.
+#
+# Copyright (C) 2001-2017 Free Software Foundation, Inc.
+# This file, Rules-quot, and its auxiliary files (listed under
+# DISTFILES.common.extra1) are free software; the Free Software Foundation
+# gives unlimited permission to use, copy, distribute, and modify them.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+	$(MAKE) en@quot.po-update
+en@boldquot.po-create:
+	$(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+	if test "$(PACKAGE)" = "gettext-tools" && test "$(CROSS_COMPILING)" != "yes"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+	tmpdir=`pwd`; \
+	echo "$$lang:"; \
+	ll=`echo $$lang | sed -e 's/@.*//'`; \
+	LC_ALL=C; export LC_ALL; \
+	cd $(srcdir); \
+	if $(MSGINIT) $(MSGINIT_OPTIONS) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null \
+	   | $(SED) -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | \
+	   { case `$(MSGFILTER) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	     '' | 0.[0-9] | 0.[0-9].* | 0.1[0-8] | 0.1[0-8].*) \
+	       $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed \
+	       ;; \
+	     *) \
+	       $(MSGFILTER) `echo $$lang | sed -e 's/.*@//'` \
+	       ;; \
+	     esac } 2>/dev/null > $$tmpdir/$$lang.new.po \
+	     ; then \
+	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  else \
+	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	      :; \
+	    else \
+	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	      exit 1; \
+	    fi; \
+	  fi; \
+	else \
+	  echo "creation of $$lang.po failed!" 1>&2; \
+	  rm -f $$tmpdir/$$lang.new.po; \
+	fi
+
+en@quot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+	rm -f *.insert-header
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/stamp-po dpkg-1.20.7.1/scripts/po/stamp-po
--- dpkg-1.20.7.1-orig/scripts/po/stamp-po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/stamp-po	2021-06-09 18:25:13.967501921 -0500
@@ -0,0 +1 @@
+timestamp
diff -Naurp dpkg-1.20.7.1-orig/scripts/po/sv.gmo dpkg-1.20.7.1/scripts/po/sv.gmo
--- dpkg-1.20.7.1-orig/scripts/po/sv.gmo	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/po/sv.gmo	2021-06-09 18:25:13.964501917 -0500
@@ -0,0 +1,169 @@
+����i��&|�&'='Q'�e'{( �(J�(@�(-),?);l)"�)�)8�)#*<* D*e*u*�*�*�*!�*(�*#+C+c+}+l�+,(,#E,Ji,�,�,/�,9-&?-f-�-*�-;�-%�-!%.1G.Sy.,�.(�.4#/)X/F�/I�/H0\0m0G0��1Y4'p4B�4(�45@#5<d5��5"Q6It63�6-�6> 75_7��7{�89%9l=9b�;!
>A/>"q>��>)|?#�@(�@)�@TAVrA)�A+�A3BgSB�B,�B8�B1CE=C#�C�C�C�C(�C('DPDmD!�D-�DL�D5'E>]E�E�ES�ES$F,xF'�F�F�F2�F(G:G\XG)�G�G�G'H.H5FH|H�H�H�H�HU�HPIkI�I�I�I�I'�I�I0JJJ!ZJ|J�J�J�J�J�J8�J+K<K![K}K�K)�K�K�KFLFGL�L�L�L�L�L
�L
+MM1M2QM!�M�M�M�M�M*N,7N,dN�N$�N+�NY�N�SO P.@P2oP0�P#�P1�P5)Q
+_Q	jQ(tQ-�Q �Q �Q
RR(6R0_R�R�R6�RS<SDS5XS/�S%�S$�S	T'TET ]T ~T�T)�T�T U)U9UrTU%�U �U=VBLV*�V�V;�V8W
LWZW"xW)�W0�W"�W#X&=XdX)�X<�X �X$Y1Y<MY�YB�Y-�Y!
Z?/ZoZ3�Z:�Z3�Z2[$P[/u[�[�[�[$�[	\' \-H\4v\(�\-�\&]7)]0a]/�]3�]�]?^9N^1�^!�^0�^ 
_9._(h_�_0�_'�_:`%=`c``(�`5�`)�`
+a&a.3aba�a�a�a-�a�a.b=Hb&�b"�b6�bmc"uc'�c4�c4�c*dDd6dd*�dA�de,e:Ae|e�e1�e^�eRLf[�f@�f<g,Wg?�g>�g0h74hlh�h��h&|i/�i�i�ij* j#Kjoj
+{j�j�j
�j�j6�j#
+k.kKkak@zk1�k'�kl
1l2?l1rl<�l�lC�lq7mq�mn./n.^n�n/�n5�n'o*o09o)jo<�o9�op3 pBTp�p
�p!�p�pSq>Uq2�q#�q+�q8roPr,�r$�r.s6As%xs#�s�s%�stt.,t)[t�t-�t�t*�t
u9$u(^u�u�u%�u%�uEvERv:�v�v�v�v2wLw%aw�w�w'�w�w0�w+x"8x-[x1�x�x!�x�x-	y7y*Py7{y5�yj�y*Tzz�z�z�z�z�z.{(F{o{{{�{�{�{+�{=�{;;|Aw|9�|��|�}~!*>�V��&��f��I�
`�.n�:��&؁%��;%�a�{�����*��
+�!��&0�,W�'��$��у�k
�y�*��&��M�2�>�*R�>}�&��)�
�2&�?Y�����/؆Y�+b�+��=��+��I$�On�J��
	�
�Q%��w�"�#9�F]�*��ύI�H2��{�#=�Sa�5��/�E�5a������%�B��`���)��A�'%��M�2I�*|�-��=՚[�Vo�0ƛ1��C)�km�ٜ%�8�
K�DY�!����'ߝ&�,.�&[�����.��(�R�9h�C�����Z�Yr�2̠2��
+2�=�0Y�����c��.�G�1X�-��(��?�!�>�#^�����c���3�Q�,c���'��&Ϥ��4�H�'b�������ѥ�$��8"�[�)o�,��Ʀ#�7�<�.\�H��Hԧ�0�P�\� l���	����8��6��,�"L�o����)��-�2�C�Z�)z�e���
+� ��7�2O�3��)��-�5�D�P�(X�0����!ѭ��( �-I�w���2��ٮAݮ�88�6q�*��)ӯ��(�#9�%]�&��&��:Ѱ0�(=�f�*~�r��"�&?�Of�\��<�P�;j�>���#��"�2;�9n�'��+д0��!-�/O�A�%���3�>;�z�X��0�%�P:�.��:��C��:9�t�3��0ĸ�����4�S�)l�1��:ȹ"�*&�"Q�?t�/��7�3�P�Bn�8��6�!!�3C� w�5��'μ��/�&D�>k�,��׽�$�20�*c�����@��#��"�=�7V�!��(��Hٿ'"�J�@i�r��#�A�2^�A����'��=�/S�?����5��J�#K� o�7��j��Y3�j��=��$6�+[�:��>��2�04�e������!z�1�������1�)N�x�
+��!��������>�,C�$p�����@��F�&I�&p���-��.��;�B�HV�e��e�k�0��0����&��:�1T���:��1��N�>S���F��@��4�N�f�&��a��;
�/I�&y�9��5����;��1��1�?9�$y�$��������/.�<^�!��7��%��3�O�=k�6������$�%>�Bd�B��6��
!�/�H�+d���%������(�$)�0N�
���)��.��
+�*�6�+T���$��8��9��w/�7���� �� �@�Q�!p�/��)������/�3�G�.\�<��:��G�YK�Q��T��v
�G'�&7�������U^���^��GO��2)���B���?�
+-"�Bk�m�pS�=�m|�y ������RMEc������z{A��
���F���23��3�j�kK�*;�8\���P�,���g��s�$�r(�"��V��Z��?1����O���Q�M�)�%u@7sfn�Lg�t�q������e
+5x�riJ#]h���	�>e��0	�6��RT�%�1wb�f�=�!�xltD]H:����H��9y����-d����U X[����`F�����vi�/���@*_��4|<,}Ca�9�Y�{��b�$oN���D����h�+��Sa�#�W�!���.;����w`���8�4��/P'5���u:��[�d�_��n�C�&l�IK����A.��Yc��0EI(VJ�>jL���zNW+��X\���q~6pZo��~<}���
+This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+  %s (package says %s, not %s)  new version is %s  old version is %s$ORIGIN is used in RPATH of %s and the corresponding directory could not be identified due to lack of DEBIAN sub-directory in the root of package's build tree%d similar warning has been skipped (use -v to see it)%d other similar warnings have been skipped (use -v to see them all)%s contains an insecure path: %s%s contains an unresolvable reference to symbol %s: it's probably a plugin%s didn't complete in %d second%s didn't complete in %d seconds%s does not exist%s doesn't contain a valid OpenPGP signature%s doesn't contain any information about the source package%s doesn't list any binary package%s doesn't match completely %s%s field contains value %s, but no tests control file %s%s field of package %s: %s file%s has an unexpected SONAME (%s)%s is a symlink%s is a symlink to outside %s%s is empty%s is not a compression level%s is not a plain file%s is not a supported compression%s is not a supported compression method%s is not a supported variable name%s is not a valid option for %s%s is not a valid version%s is not the name of a file%s must be updated to support the 'build-arch' and 'build-indep' targets (at least '%s' seems to be missing)%s needs a parameter%s should be a directory or non-existing%s should be a file or non-existing%s should not be linked against %s (it uses none of the library's symbols)%s(l%s): %s%s(l%s): %s
+LINE: %s'%s' is not supported by the source format '%s''dpkg-deb -I %s control' exited with %d, skipping package'offset' without 'count' has no effect(Use -d flag to override.)--%s needs a directory--%s needs at least one argument, the .dsc--%s needs the .dsc file as first argument, not a directory--%s takes no more than two arguments--target-format option is missing-E and -W are deprecated, they are without effect-b takes at most a directory and an orig source argument (with v1.0 source package)-b takes only one parameter with format '%s'-i%s is deprecated; it is without effect-s%s is deprecated; always using gpg style interface-s%s option overrides earlier -s%s option.orig directory name %s is not <package>-<upstreamversion> (wanted %s).orig.tar name %s is not <package>_<upstreamversion>.orig.tar (wanted %s)<control-file> is the control file to process (default: debian/control).<standard input><standard output>Commands:
+  --is <vendor>           returns true if current vendor is <vendor>.
+  --derives-from <vendor> returns true if current vendor derives from <vendor>.
+  --query <field>         print the content of the vendor-specific field.
+  --help                  show this help message.
+  --version               show the version.Commands:
+  -l, --list                list variables (default).
+  -L, --list-known          list valid architectures (matching some criteria).
+  -e, --equal <arch>        compare with host Debian architecture.
+  -i, --is <arch-wildcard>  match against host Debian architecture.
+  -q, --query <variable>    prints only the value of <variable>.
+  -s, --print-set           print command to set environment variables.
+  -u, --print-unset         print command to unset environment variables.
+  -c, --command <command>   set environment and run the command in it.
+  -?, --help                show this help message.
+      --version             show the version.Debian %s version %s.
+Dependency fields recognized are:
+  %s
+Dpkg::Compression::Process can only start one subprocess at a timeDpkg::Shlibs::Objdump couldn't parse %s
+Enter the desired patch name: File::FcntlLock not available; using flock which is not NFS-safeFormat '3.0 (custom)' is only used to create source packagesNote: libraries are not searched in other binary packages that do not have any shlibs or symbols file.
+To help dpkg-shlibdeps find private libraries, you might need to use -l.OpenPGP signature not allowed hereOptions:
+  --vendor <vendor>       assume <vendor> is the current vendor.Packages in archive but missing from override file:Packages in override file but not in archive:Packages in override file with incorrect old maintainer value:Packages specifying same maintainer as override file:Positional options (order is significant):
+  <executable>             include dependencies for <executable>,
+  -e<executable>           (use -e if <executable> starts with '-')
+  -d<dependency-field>     next executable(s) set shlibs:<dependency-field>.This is free software; see the GNU General Public License version 2 or
+later for copying conditions. There is NO warranty.
+Usage: %s [<command>]Usage: %s [<option>...]Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Packages
+
+Options:
+  -t, --type <type>        scan for <type> packages (default is 'deb').
+  -a, --arch <arch>        architecture to scan for.
+  -h, --hash <hash-list>   only generate hashes for the specified list.
+  -m, --multiversion       allow multiple versions of a single package.
+  -e, --extra-override <file>
+                           use extra override file.
+  -M, --medium <medium>    add X-Medium field for dselect multicd access method
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <binary-path> [<override-file> [<path-prefix>]] > Sources
+
+Options:
+  -n, --no-sort            don't sort by package before outputting.
+  -e, --extra-override <file>
+                           use extra override file.
+  -s, --source-override <file>
+                           use file for additional source overrides, default
+                           is regular override file with .src appended.
+      --debug              turn debugging on.
+  -?, --help               show this help message.
+      --version            show the version.
+
+See the man page for the full documentation.
+Usage: %s [<option>...] <command>Usage: %s [<option>...] <executable>|-e<executable> [<option>...]Usage: %s [<option>...] <file>...
+Usage: %s [<option>...] <filename> <section> <priority>
+
+Options:
+  -f<files-list-file>      write files here instead of debian/files.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] <old> <new-a> <new-b> [<out>]
+
+Options:
+  -m, --merge-prereleases  merge pre-releases together, ignores everything
+                           after the last '~' in the version.
+  -?, --help               show this help message.
+      --version            show the version.
+Usage: %s [<option>...] [<command>]Usage: %s [<option>...] [<control-file>]Use --help for program usage information.Version number suggests Ubuntu changes, but Maintainer: does not have Ubuntu addressVersion number suggests Ubuntu changes, but there is no XSBC-Original-Maintainer fieldWrote %s entries to output Packages file.aborting due to --abort-on-upstream-changesaborting due to unexpected upstream changes, see %sadd %s in debian/source/include-binaries if you want to store the modified binary in the debian tarballadding %s to %sadministrative directory '%s' does not existan union dependency can only contain simple dependenciesapplying %sarchitecture %s only allowed on its own (list for package %s is '%s')assuming architecture '%s' for '%s'assuming section '%s' for '%s'bad binary-only value: %sbad key-value after ';': '%s'bad line in substvars file %s at line %dbad package control information for '%s'badly formatted heading linebadly formatted trailer linebadly formatted urgency value: %sbadly formed line in files list file, line %dbinaries to analyze should already be installed in their package's directorybinary and diff upload (original source NOT included)binary build with no binary artifacts found; cannot distributebinary control file %sbinary file contents changedbinary-only arch-indep upload (source code and arch-specific packages not included)binary-only arch-specific upload (source code and arch-indep packages not included)binary-only upload (no source code included)binary-only upload (no source included)block deviceblock lacks the '%s' fieldbuild dependencies/conflicts unsatisfied; abortingbuilding %s in %sbuilding %s using existing %sbuilding a source package without cleaning up as you asked; it might contain undesired filesbuilding source for a binary-only releasebundling: %sbzr status exited nonzerocan't build with source format '%s': %scan't create symlink %scan't extract name and version from library name '%s'can't parse dependency %scan't read directory %s: %scannot change timestamp for %scannot close %scannot combine %s and %scannot continue due to the error abovecannot continue due to the errors listed abovecannot create directory %scannot create directory '%s'cannot find '%s'cannot find an editorcannot fork for %scannot fstat file %scannot install output control file '%s'cannot make %s executablecannot merge symbols from objects without SONAMEcannot mkdir %scannot move '%s' to existing filecannot open %scannot open file %scannot opendir %scannot read %scannot read link %scannot read timestamp from %scannot register changes in %s, this patch already existscannot remove %scannot represent change to %s:cannot represent change to %s: %scannot stat %scannot stat directory %scannot stat directory %s (before removal)cannot stat file %scannot stat orig argument %scannot unpack bzr-format source package because bzr is not in the PATHcannot unpack git-format source package because git is not in the PATHcannot write %scharacter '%s' not allowedcharacter devicechdir to %scheck-command '%s' not foundchild processcloning %sclose on tar inputconflicting checksums '%s' and '%s' for file '%s'conflicting file sizes '%u' and '%u' for file '%s'continued value line not in fieldcontrol info of a .deb packagecontrol informationcopy of the debian directorycouldn't close stdoutcouldn't parse control information from %scouldn't parse dynamic relocation record: %scouldn't parse dynamic symbol definition: %screated directory '%s'creating shallow clone with depth %sdebian/rules is not executable; fixing thatdefault GNU system type %s for Debian arch %s does not match specified GNU system type %sdetected %d unwanted binary file (add it in debian/source/include-binaries to allow its inclusion).detected %d unwanted binary files (add them in debian/source/include-binaries to allow their inclusion).device or socket is not alloweddiff %s modifies file %s through a symlink: %sdiff %s patches file with C-style encoded filenamediff %s removes a non-existing file %s (line %d)diff '%s' doesn't contain any patchdiff '%s' finishes in middle of ---/+++ (line %d)diff '%s' patches something which is not a plain filediff on %sdirectorydirectory argument %s is not a directorydiversions involved - output may be incorrectdoesn't contain a bzr repositorydoesn't contain a git repositorydpkg-genchangesduplicate field %s foundduplicate files in %s source package: %sduplicate files list entry for file %s (line %d)entry in dpkg's status fileentry in repository's %s fileepoch part of the version number is not a number: '%s'errorexecutable mode %04o of '%s' will not be represented in diffexpected %s, got %sexpected OpenPGP signature, found something else '%s'expected [ +-] at start of line %d of diff '%s'expected ^--- in line %d of diff '%s'expected ^@@ at line %d of diff '%s'extracting %s in %sextracting unsigned source package (%s)failed to copy %s to %sfailed to get a write lock on %sfailed to parse a line in %s: %sfailed to parse line in %s: %sfailed to rename newly-extracted %s to %sfailed to rename saved %s to %sfailed to verify signature on %sfailed to writefailed when writing stdoutfakeroot not found, either install the fakeroot
+package, specify a command with the -r option, or run this as rootfatal error occurred while parsing %sfield cannot start with a hyphenfile %s has checksum %s instead of expected %s (algorithm %s)file %s has no final newline (either original or modified version)file %s has size %u instead of expected %ufile arguments need to existfile removal without proper filename in diff '%s' (line %d)filename, section and priority may contain no whitespacefirst headingformat v3.0 (git) expected %sformat v3.0 (git) unknown file: %sformat v3.0 (git) uses only one .git fileformat v3.0 (git) uses only one .gitshallow filefound blank line where expected %sfound change data where expected %sfound start of entry where expected %sfound trailer where expected %sfull upload (original source is included)full upload; Debian-native package (full source is included)gain-root-command '%s' not foundgeneral section of control info filegit ls-files exited nonzerogit repository %s uses submodules; this is not yet supportedhost architectureif patch '%s' is correctly applied by quilt, use '%s' to update itignoring -sd option for native Debian packageignoring deletion of directory %signoring deletion of file %s, use --include-removal to overrideignoring deletion of symlink %signoring duplicate override entry for %s at line %dignoring duplicate source override entry for %s at line %dignoring override entry for %s, invalid priority %sillegal package name '%s': %sincluding full source code in uploadincorrect value in %s option of %s variable: %sinfoinstall new files list fileinstall new varlist file '%s'invalid dependency got generated: %sinvalid flag in %s: %sinvalid line in %s checksums string: %sinvalid override entry at line %d (%d fields)invalid source override entry at line %d (%d fields)invalid syntax for option in %s, line %dline %d of %s is invalid, it has been ignoredline %d of %s mentions unknown flag %sline after --- isn't as expected in diff '%s' (line %d)line with unknown format (not field-colon-value)local changes detected, the modified files are:local changes have been recorded in a new patch: %smay not be empty stringmismatched addon orig.tar %s for signature %s in source packagemismatched orig.tar %s for signature %s in source packagemissing Priority for binary package %s; using '-'missing Priority for source filesmissing Section for binary package %s; using '-'missing Section for source filesmissing addon orig.tar for signature %s in source packagemissing critical source control field %smissing hook %s commandmissing information for critical output field %smissing information for output field %smissing orig.tar or debian.tar file in v2.0 source packagemkdir can be used to create directorymore change data or trailermoved '%s' to '%s'multiple tarfiles in v1.0 source packagemust specify package since control info has many (%s)must start with an alphanumeric characternamed pipenamed socketnative package version may not have a revisionnative package with .orig.tarneed an action optionneed at least a filenameneed at least one executableneed exactly a filename, section and priorityneeds at least three argumentsnew libraries appeared in the symbols file: %snewly created empty file '%s' will not be represented in diffno Package field in control file of %sno binary packages specified in %sno debian/symbols file used as basis for generating %sno dependency information found for %s (used by %s)
+Hint: check if the library actually comes from a package.no files indicated on command lineno package stanza found in control infono source format specified in %s, see dpkg-source(1)no such directory '%s', try --create-dir (-c) optionno tarfile in Files fieldno upstream tarball found at %snon-native package version does not contain a revisionnone found, starting from the oldest entrynone of the filenames in ---/+++ are valid in diff '%s' (line %d)nonexistentnot including original source code in uploadnot signing UNRELEASED build; use --force-sign to overrideone to three arguments expectedonly supports gzip compressionorig argument %s is not a plain file or directoryorig argument is empty (means no orig, no diff) but source handling style -s%s wants somethingorig argument is packed but source handling style -s%s calls for unpacked (.orig/)orig argument is unpacked but source handling style -s%s calls for packed (.orig.tar.<ext>)original and modified files are /dev/null in diff '%s' (line %d)override file %s not foundpackage %s (filename %s) has Filename field!package %s has priority %s in control file but %s in files listpackage %s has section %s in control file but %s in files listpackage %s in control file but not in files listpackage %s listed in files list but not in control infopackage %s not in control infopackage %s: package could avoid a useless dependency if %s was not linked against %s (it uses none of the library's symbols)package could avoid a useless dependency if %s were not linked against %s (they use none of the library's symbols)package's section of control info filepacked orig '%s' exists but is not a plain fileparse changes fileparsed version of changelogpatch file '%s' doesn't existpatches are not applied, applying them nowpattern '%s' did not match any filepipe for %splain fileremove patch backup file %sreopen stdinreopen stdoutrepeated key-value %srequired removal of '%s' installed by original tarballrestoring quilt backup files for %srm -rf failed to remove '%s'see diff output belowsetting up shallow cloneseveral orig.tar files found (%s and %s) but only one is allowedshared libs info file '%s' line %d: bad line '%s'short option not allowed in %s, line %dsign-command '%s' not foundskipping '%s'some libraries disappeared in the symbols file: %ssome new symbols appeared in the symbols file: %ssome symbols or patterns disappeared in the symbols file: %ssource changed bysource directory '%s' is not <sourcepackage>-<upstreamversion> '%s'source directory is not the top directory of a bzr repository (%s/.bzr not present), but Format bzr was specifiedsource directory is not the top directory of a git repository (%s/.git not present), but Format git was specifiedsource distributionsource handling style -s%s not allowed with -bsource handling style -s%s not allowed with -xsource packagesource package format '%s' is not supported: %ssource package has two conflicting values - %s and %ssource package name '%s' is illegal: %ssource versionsource-only upload (original source is included)source-only upload: Debian-native packagesource-only, diff-only upload (original source NOT included)special mode %04o of '%s' will not be represented in diffstart of change datasymbol %s used by %s found in none of the librariessymbol information must be preceded by a header (file %s, line %s)symbol name unspecified: %ssymlink to %ssyntax error in %s at line %d: %stakes no non-option argumentstarfile '%s' already exists, not overwriting, giving up; use -sU or -sR to overridethe current version (%s) is earlier than the previous one (%s)the diff modifies the following upstream files: %sthe generated symbols file is emptythe header doesn't match the expected regexthe patch has fuzz which is not allowed, or is malformedthe series file (%s) contains unsupported options ('%s', line %s); dpkg-source might fail when applying patchesthe trailer doesn't match the expected regexthere are no local changes to recordtoo many substitutions - recursive ? - in '%s'tried to merge the same object (%s) twice in a symfiletwo commands specified: --%s and --%sunable to change permission of '%s'unable to chdir to '%s'unable to check for existence of '%s'unable to determine %sunable to execute %sunable to keep orig directory (already exists)unable to open shared libs info file '%s'unable to rename %s to %sunable to rename '%s' (newly created) to '%s'unable to rename '%s' to '%s'unable to stat putative unpacked orig '%s'unapplying %suncommitted, not-ignored changes in working directory: %sunconditional maintainer override for %sunexpected end of diff '%s'unfinished OpenPGP signatureunknown %% substitution in hook: %%%sunknown %s feature in %s variable: %sunknown Debian architecture %s, you must specify GNU system type, toounknown GNU system type %s, you must specify Debian architecture, toounknown default GNU system type for Debian architecture %sunknown file typeunknown hook name %sunknown host architecture '%s'unknown information field '%s' in input data in %sunknown key-value %sunknown line from diff -u on %s: '%s'unknown option '%s'unknown option or argument %sunknown output from dpkg --search: '%s'unpack target exists: %sunpacked orig '%s' exists but is not a directoryunpacking %sunrecognized dependency field '%s'unrecognized file for a %s source package: %sunrecognized file for a native source package: %sunrecognized lineunrepresentable changes to sourceunsupported checksum '%s'unsupported version of the quilt metadata: %sunwanted binary file: %supstream files that have been modified: %suse newest entry that is earlier than the one specifieduse oldest entry that is later than the one specifieduse the '3.0 (quilt)' format to have separate and documented changes to upstream files, see dpkg-source(1)using a gain-root-command while being rootusing options from %s: %susing source format '%s'vendor %s doesn't exist in %svendor fileversion '%s' is invalid: %sversion number cannot be emptyversion number contains illegal character '%s'version number does not start with digitwait for %swarningwrite diversion info to stderrwrite error on control datawrite on tar inputyou can integrate the local changes with %syou can only specify one of 'from' and 'since', using 'since'you can only specify one of 'to' and 'until', using 'until'you can't combine 'count' or 'offset' with any other range optionyou can't use symver tag to catch unversioned symbols: %sProject-Id-Version: dpkg-dev 1.17.22
+Report-Msgid-Bugs-To: debian-dpkg@lists.debian.org
+PO-Revision-Date: 2016-12-09 11:32+0100
+Last-Translator: Peter Krefting <peter@softwolves.pp.se>
+Language-Team: Svenska <debian-l10n-swedish@lists.debian.org>
+Language: sv
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+Plural-Forms: nplurals=2; plural=(n != 1);
+
+Detta program är fri programvara. Se GNU General Public License version 2
+eller senare för kopieringsvillkor. Det finns INGEN garanti.
+  %s (paketet säger %s, inte %s)  ny version är %s  gammal version är %s$ORIGIN används i RPATH för %s och motsvarande katalog kunde inte identifieras på grund av DEBIAN-underkatalogen saknas i roten av paketets byggträd%d annan liknande varning har hoppats över (använd -v för att visa den)%d andra liknande varningar har hoppats över (använd -v för att visa alla)%s innehåller en osäker sökväg: %s%s innehåller en referens till symbolen %s som inte kan kopplas; det är troligen ett insticksprogram%s blev inte färdigt på %d sekund%s blev inte färdigt på %d sekunder%s finns inte%s innehåller inte en giltig OpenPGP-signatur%s innehåller inte någon information om källkodspaketet%s räknar inte upp några binärpaket%s stämmer inte helt överens med %sFältet %s innehåller värdet %s, men ingen teststyrfil %s%s-fältet i paketet %s: filen %s%s har ett oväntat SONAMN (%s)%s är en symbolisk länk%s är en symbolisk till länk utanför %s%s är tom%s är inte en komprimeringsnivå%s är inte en vanlig fil%s är inte en komprimering som stöds%s är inte en komprimeringsmetod som stöds%s är inte ett variabelnamn som stöds%s är inte en giltig flagga för %s%s är inte en giltig version%s är inte namnet på en fil%s måste uppdateras för att stöda målen "build-arch" och "build-indep" (åtminstone "%s" verkar saknas)%s behöver en parameter%s borde vara en katalog eller inte finnas%s borde vara en fil eller inte finnas%s borde inte vara länkat mot %s (inga av symbolerna i biblioteket används)%s(l%s): %s%s(l%s): %s
+RAD: %s"%s" stöds inte av källkodsformatet "%s""dpkg-deb -l %s control" avslutades med %d, hoppar över paket"offset" utan "count" har ingen effekt(Använd flaggan -d för att överstyra.)--%s behöver en katalog--%s behöver åtminstone ett argument, .dsc-filen--%s måste ha .dsc-filen som första argument, inte en katalog--%s tar maximalt två argumentflaggan --target-format saknas-E och -W rekommenderas ej, de har ingen effekt-b tar som mest en katalog och en originalkällkod som argument (med v1.0-källkodspaket)-b tar bara en parameter för formatet "%s"-i%s rekommenderas ej; det har ingen effekt-s%s är föråldrat; använder alltid gränssnitt av gpg-typflaggan -s%s ersätter tidigare flagga -s%s.orig-katalognamnet %s är inte <paket>-<uppströmsversion> (önskade %s).orig.tar-namnet %s är inte <paket>_<uppströmsversion>.orig.tar (önskade %s)<control-fil> är styrfilen som skall hanteras (standard: debian/control).<standard in><standard ut>Kommandon:
+  --is <leverantör>       sant om aktuell leverantör är <leverantör>.
+  --derives-from <lev.>   sant om aktuell leverantör härleds från <lev.>
+  --query <fält>          visa innehållet i leverantörsspecifikt fält.
+  --help                  visa detta hjälpmeddelande.
+  --version               visa versionsnummer.Åtgärder:
+  -l, --list                lista variabler (standardfunktion).
+  -L, --list-known          visa giltiga arkitekturer (motsvarande kriterier).
+  -e, --equal <ark>         jämför med värd-Debianarkitektur.
+  -i, --is <ark-joker>      matcha mot värd-Debianarkitektur.
+  -q, --query <variabel>    skriver bara ut värdet på <variabel>.
+  -s, --print-set           skriv kommandon för att sätta miljövariabler.
+  -u, --print-unset         skriv kommandon för att ta bort miljövariabler.
+  -c, --command <kommando>  ställ in miljö och kör kommandot i den.
+  -?, --help                visa detta hjälpmeddelande.
+      --version             visa versionsnummer.Debian %s version %s.
+Beroendefält som stöds är:
+  %s
+Dpkg::Compression::Process kan bara starta en underprocess åt gångenDpkg::Shlips::Objdump kunde inte tolka %s
+Ange önskat patchnamn: File::FcntlLock ej tillgänglig; använder flock som inte är NFS-säkertFormat "3.0 (skräddarsytt)" används bara för att skapa källkodspaketObservera: andra binärpaket som inte har shlibs- eller symbols-filer söks inte genom efter bibliotek.
+För att hjälpa dpkg-shlibdeps att hitta privata bibliotek måste du kanske använda -l.OpenPGP-signatur tillåts inte härFlaggor:
+  --vendor <leverantör>   anta att <leverantör> är aktuell leverantör.Paket i arkivet men som saknas i överstyrningsfilen:Paket i överstyrningsfilen men inte i arkivet:Paket i överstyrningsfilen med felaktigt värde på gammal ansvarig:Paket som anger samma ansvarig i överstyrningsfilen:Positionsberoende flaggor (ordningen har betydelse):
+  <binär>                  ta med beroenden för <binär>,
+  -e<binär>                (använd -e om <binär> börjar med "-")
+  -d<beroendefält>         nästa binär(er) sätter shlibs:<beroendefält>.Detta program är fri programvara. Se GNU General Public License version 2
+eller senare för kopieringsvillkor. Det finns INGEN garanti.
+Användning: %s [<åtgärd>]Användning: %s [<flagga>...]Användning: %s [<flagga> ...] <binärkatalog> [<överstyrfil> [<sökvägprefix>]] > Packages
+
+Flaggor:
+  -t, --type <typ>         sök efter <typ>-paket (standard är "deb").
+  -a, --arch <ark>         arkitektur att söka efter.
+  -h, --hash <hashlista>   generera bara hashar för den angivna listan.
+  -m, --multiversion       tillåt flera versioner av samma paket.
+  -e, --extra-override <fil>
+                           använd extra överstyrningsfil.
+  -M, --medium <medium>    lägg till X-Medium-fält för dselects:s
+                           multicd-åtkomstmetod
+  -?, --help               visa detta hjälpmeddelande.
+      --version            visa versionsnummer.
+Användning: %s [<flagga> ...] <binarkatalog> [<överstyrfil> [<sökvägprefix>]] > Sources
+
+Flaggor:
+  -n, --no-sort            sortera inte paket innan de skrivs ut.
+  -e, --extra-override <fil>
+                           använd extra överstyrningsfil.
+  -s, --source-override <fil>
+                           använd fil för ytterligare källkodsöverstyrningar,
+                           standard är vanliga överstyrningsfilen med tillägg
+                           .src.
+      --debug              slå på felsökning.
+  -?, --help               visa detta hjälpmeddelande.
+      --version            visa versionsnummer.
+
+Se manualsidan för fullständig dokumentation.
+Användning: %s [<flagga> ...] <åtgärd>Användning: %s [<flagga> ...] <binär>|-e<binär> [<flagga> ...]Användning: %s [<flagga>...] <fil>...
+Användning: %s [<flagga>...] <filnamn> <sektion> <prioritet>
+
+Flaggor:
+  -f<fillistfil>           skriver filer här istället för debian/files.
+  -?, --help               visa detta hjälpmeddelande.
+      --version            visa versionsnummer.
+Användning: %s [<flagga>...] <gammal> <ny-a> <ny-b> [<ut>]
+
+Flaggor:
+  -m, --merge-prereleases  slå ihop förhandsutgåvor, ignorerar allt
+                           efter sista "~" i versionsnumret.
+  -?, --help               visa detta hjälpmeddelande.
+      --version            visa versionsnummer.
+Användning: %s [<flagga>...] [<åtgärd>]Användning: %s [<flagga>...] [<control-fil>]Använd --help för hjälp om hur du använder programmet.Versionsnumret indikerar Ubuntuändringar, men Maintainer: innehåller inte en UbuntuadressVersionsnumret indikerar Ubuntuändringar, men fältet XSBC-Original-Maintainer saknasSkrev %s poster till den skapade Packages-filen.avbryter på grund av --abort-on-upstream-changesavbryter på grund av oväntade uppströmsändringar, se %s-changeslägg till %s i debian/source/include-binaries om du vill spara den modifierade binären i debian-tarbollenlägger %s till %sadministrativ katalog "%s" finns inteett unionsberoende kan endast innehålla enkla beroendentillämpar %sarkitektur %s tillåts inte ensamt (listan för paketet %s är "%s")antar arkitekturen "%s" för "%s"antar sektionen "%s" för "%s"felaktigt värde för endast binär: %sfelaktigt nyckelvärde efter ";": "%s"felaktig rad i substvars-filen %s på rad %dfelaktig paketstyrinformation för %s.felaktigt formaterad rubrikradfelaktigt formaterad fotradfelaktigt formaterat värde för "urgency": %sfelformaterad rad i fillistfilen, rad %dbinärer som skall analyseras måste redan vara installerade i sitt pakets katalogbinär- och diffinsändning (originalkällkod tas EJ med)binärbygge utan binära artifakter upptäckt; kan inte distribuerabinär styrfil %sinnehåll i binär fil ändratendast binär arkitekturoberoende insändning (inkluderar ej källkod och ark-spec. paket)endast binär arkitekturspecifik insändning (inkluderar ej källkod och ark-ober. paket)endast binär insändning (inkluderar ej källkod)endast binär insändning (ingen källkod tas med)blockenhetblocket saknar fältet "%s"byggberoenden/-konflikter ej uppfyllda; avbryterbygger %s i %sbygger %s med befintlig %sbygger ett källkodspaket utan att städa upp som efterfrågat; det kan innehålla oönskade filer.bygger källkod för utgåva med endast binärskapar packe: %sbzr status avslutade med en annan status än nollkan inte bygga med källkodsformatet "%s": %skan inte skapa den symboliska länken %skan inte extrahera namn och version från biblioteksnamnet "%s"kan inte tolka beroendet %s:kan inte läsa katalogen %s: %skan inte ändra tidsstämpel på %skan inte stänga %skan inte kombinera %s och %skan inte fortsätta på grund av ovanstående felkan inte fortsätta på grund av ovanstående felkan inte skapa katalogen %skan inte skapa katalogen "%s"kan inte hitta %skan inte hitta något textredigeringsprogramkan inte grena för %skan inte ta status (fstat) på filen %skan inte installera utdatastyrfil "%s"kan inte göra %s exekverbarkan inte slå ihop symboler från objekt utan SONAMNkan inte skapa katalog %skan inte flytta "%s" till befintlig filkan inte öppna %skan inte öppna filen %skan inte öppna katalog %skan inte läsa %skan inte läsa länken %skan inte läsa tidsstämpel från %skan inte registrera ändringar i %s, patchen finns redankan inte ta bort %skan inte representera ändringen för %s:kan inte representera ändringen för %s: %skan inte ta status på %skan inte ta status på katalogen %skan inte ta status på katalogen %s (före borttagning)kan inte ta status på filen %skunde inte ta status på originalargumentet %skan inte packa upp källkodspaket i bzr-format då bzr inte finns i PATHkan inte packa upp källkodspaket i git-format då git inte finns i PATHkan inte skriva %stecknet "%s" är inte tillåtetteckenenhetchdir till "%s"testkommandot "%s" hittades intebarnprocessklonar %sstängning av tar-indatamotsägande kontrollsummor "%s" och "%s" för filen "%s"motsägande filstorlekar "%u" och "%u" för filen "%s"fortsatt värderad inte i fältstyrinformationen i ett .deb-paketstyrinformationkopia av debian-katalogenkunde inte stänga standard utkunde inte tolka styrinformation från %skunde inte tolka dynamisk relokeringspost: %skunde inte tolka definition av dynamisk symbol: %sskapade katalogen "%s"skapar grund klon med djupet %sdebian/rules är inte exekverbar: rättarförvald GNU-systemtyp %s för Debianarkitekturen %s stämmer inte med den angivna GNU-systemtypen %supptäckte %d oönskad binärfil (lägg till den i debian/source/include-binaries för att tillåta att den tas med)upptäckte %d oönskade binärfiler (lägg till dem i debian/source/include-binaries för att tillåta att de tas med)enhet eller uttag inte tillåtetdiffen %s ändrar filen %s genom en symbolisk länk: %sdiffen "%s" patchar fil med filnamn kodat i C-stildiffen %s tar bort filen %s som inte finns (rad %d)diffen "%s" innehåller inte någon patchdiffen "%s" slutar mitt i en ---/+++ (rad %d)diffen "%s" patchar något som inte är en vanlig fildiff på %skatalogkatalogargumentet %s är inte en katalogomdirigeringar finns - utdata kan vara felaktigainnehåller inte ett bzr-arkivinnehåller inte något git-arkivdpkg-genchangesduplicerat fält %s hittadesdubblerade filer i %s-källkodspaket: %sduplicerad fillistpost för filen %s (rad %d)post i dpkg:s statusfilpost i arkivets fil %sepokdelen av versionsnumret är inte ett tal: "%s"felexekveringsläge %04o på "%s" kommer inte representeras i diffenförväntade %s, fick %sförväntade OpenPGP-signatur, hittade något annat "%s"förväntade [ + ] vid början av rad %d i diffen "%s"förväntade ^--- på rad %d i diffen "%s"förväntade ^@@ på rad %d i diffen "%s"extraherar %s i %sextraherar osignerat källkodspaket (%s)misslyckades att kopiera %s till %smisslyckades få ett skrivlås på %smisslyckades att tolka en rad i %s: %smisslyckades att tolka en rad i %s: %smisslyckades att ta bort %s, som just extraherats, till %smisslyckades att byta namn på sparad %s till %smisslyckades verifiera signaturen på %smisslyckades att skrivamisslyckades vid skrivning på standard utfakeroot hittades inte, du kan installera paketet fakeroot,
+ange ett kommando med flaggan -r, eller köra som rootödesdigert fel vid tolkning av %sfält kan inte inledas med bindestreckfilen %s har kontrollsumman %s istället för den förväntade %s (algoritm %s)filen %s har inget avslutande nyradstecken (antingen i ursprunglig eller modifierad version)filen %s har storleken %u istället för den förväntade %ufilargument måste finnasborttagen fil saknar korrekt filnamn i diffen "%s" (rad %d)filnamn, sektion och prioritet kan inte innehålla blankteckenförsta rubrikformatet v3.0 (git) förväntade %sformatet v3.0 (git) okänd fil: %sformatet v3.0 (git) använder endast en ".git"-filformatet v3.0 (git) använder endast en ".gitshallow"-filhittade blank rad där %s förväntadeshittade ändringsdata där %s förväntadeshittade början på posten där %s förväntadeshittade fot där %s förväntadeskomplett insändning (originalkällkod tas med)komplett insändnig; Debianeget paket (komplett källkod tas med)få-root-kommandot "%s" hittades inteallmän sektion i styrinfofilengit ls-files avslutade med en annan status än nollgit-arkivet %s använder undermoduler; detta stöds inte ännuvärdarkitekturom patchen "%s" kan tillämpas korrekt av quilt använder du "%s" för att uppdatera denignorerar flaggan -sd för Debianspecifikt paketignorerar borttagning av katalogen %signorerar borttagning av filen %s, använd --include-removal för att överstyraignorerar borttagning av symboliska länken %signorerar duplicerad överstyrningspost för %s på rad %dignorerar duplicerad källkodsöverstyrningspost för %s på rad %dignorerar överstyrningspost för %s, ogiltig prioritet %sogiltigt paketnamn "%s": %ssänder med komplett källkod med denna insändningfelaktigt värde i flaggan %s i variabeln %s: %sinfoinstallerar ny fillistfilinstallerar ny varlistefil "%s"ogiltigt beroende skapades: %sfelaktig flagga i %s: %sogiltigtrad i %s-kontrollsummesträng: %sfelaktig överstyrningspost på rad %d (%d fält)felaktig källkodsöverstyrningspost på rad %d (%d fält)syntaxfel för flagga i %s, rad %drad %d i %s är ogiltig och har ignoreratsrad %d i %s anger okänd flagga %sraden efter --- är inte som förväntad i diffen "%s" (rad %d)rad med okänt format (inte fält-kolon-värde)lokala ändringar upptäcktes, de ändrade filerna är:lokala ändringar har skrivits till en ny patch: %sfår inte vara en tom strängsaknad tilläggs-orig.tar %s för signaturen %s i källkodspaketetsaknad orig.tar %s för signaturen %s i källkodspaketet"Priority" saknas för binärpaketet %s; använder "-""Priority" saknas för källfiler"Section" saknas för binärpaket %s; använder "-""Section" saknas för källfilersaknad orig.tar för signaturen %s i källkodspaketetsaknar kritiska källkodsstyrfältet %ssaknat kommando för haken %ssaknar information för kritiskt utdatafält %ssaknar information för utdatafält %ssaknad orig.tar- eller debian.tar-fil för v2.0-källkodspaketmkdir kan användas för att skapa katalogenmer ändringsdata eller fotflyttade "%s" till "%s"flera tarfiler i v1.0-källkodspaketmåste ange paket eftersom styrinfo har flera (%s)måste börja med ett alfanumeriskt teckennamngivet rörnamngivet uttagDebianegen paketversion kan inte ha en debianuppdateringsversionDebianspecifikt paket med .orig.taråtgärd krävsbehöver minst ett filnamnbehöver minst en binärbehöver exakt ett filnamn, en sektion och en prioritetbehöver åtminstone tre argumentnya bibliotek dök upp i symbolfilen: %sden tomma filen "%s" som just skapats kommer inte representeras i diffeninget Package-fält i styrfilen för %singet binärpaket angivet i %sanvände ingen debian/symbols-fil som grund för att generera %shittade ingen beroendeinformation för %s (använd av %s)
+Tips: se om biblioteket faktiskt kommer från ett paket.inga filer angavs på kommandoradenpaketstrof saknas i styrinfokällkodsformat ej angivet i %s, se dpkg-source(1)katalogen "%s" finns inte, försök med flaggan --create-dir (-c)ej tarfil i Files-fältethittade ingen uppströms-tarboll på %sicke-Debianegen paketversion saknar debianuppdateringsversionhittade ingen, börjar från den äldsta posteninget av filnamnen i ---/+++ är giltiga i diffen "%s" (rad %d)saknastar inte med ursprunglig källkod i denna insändningsignerar inte "UNRELEASED"-bygge; använd --force-sign för att överstyraett till tre argument förväntadesstöder endast gzip-komprimeringorig-parametern %s är inte en vanlig fil eller katalogoriginalargument är tomt (betyder ingen orig, ingen diff) men källkodshanteringstypen -s%s ber om någotoriginalargument har packats men källkodshanteringstypen -s%s ber om en uppackad (orig/)originalargument har packats upp men källkodshanteringstypen -s%s ber om en packad (.orig.tar.<ändelse>)original och ändrad fil är /dev/null i diffen "%s" (rad %d)överstyrningsfilen %s hittades intepaketet %s (filnamn %s) har Filename-fält!paketet %s har prioritet %s i styrfilen men %s i fillistanpaketet %s har sektionen %s i styrinfofilen men %s i fillistanpaketet %s i styrinfofilen men inte i fillistfilenpaketet %s listat i fillista men inte i styrinfopaketet %s inte i styrinfopaketet %s: paketet kunde undvika ett onödigt beroende om %s inte länkades mot %s (det använder inget av bibliotekets symboler)paketet kunde undvika ett onödigt beroende om %s inte länkades mot %s (de använder inget av bibliotekets symboler)paketets sektion av styrinfofilenpackad orig "%s" finns men är inte en vanlig filtolka ändringsfiltolkad version av ändringsloggpatchfilen "%s" finns intepatcharna har inte tillämpats, tillämpar dem numönstret "%s" motsvarade inte någon filrör för %svanlig filtar bort patchsäkerhetskopian %söppna standard in på nyttöppna standard ut på nyttrepeterat nyckelvärde %snödvändig borttagning av "%s" installerad av originaltarbollåterställer quilt-säkerhetskopior för %srm -rf misslyckades att ta bort "%s"se diff-utdata nedanställer in grund klonflera orig.tar-filer hittades (%s och %s) men endast en tillåtsinformationsfilen för delade bibliotek "%s" rad %d: felaktig rad "%s"kort flagga tillåts inte i %s, rad %dsigneringskommandot "%s" hittades intehoppar över "%s"några bibliotek försvann ur symbolfilen: %snågra nya symboler dök upp i symbolfilen: %snågra symboler eller mönster försvann ur symbolfilen: %skällkod ändrad avkällkodskatalog "%s" är inte <källkodspaket>-<uppströmsversion> "%s"källkodskatalogen är inte toppkatalogen i bzr-arkivet (%s/.bzr finns inte), men formatet bzr angavskällkodskatalogen är inte toppkatalogen i git-arkivet (%s/.git finns inte), men formatet git angavskällkodsdistributionkällkodshanteringstyp -s%s tillåts inte med -bkällkodshanteringstyp -s%s tillåts inte med -xkällkodspaketkällkodsformatet "%s" stöds inte: %skällkodspaketet har två emotsägande värden - %s och %snamnet på källkodspaketet "%s" är ogiltigt: %skällkodsversioninsändning enbart med källkod (originalkällkod tas med)insändning med endast källkod: Debianeget paketinsändning enbart med källkod, enbart med diff (originalkällkod tas EJ med)specialläget %04o på "%s" kommer inte representeras i diffenbörjan på ändringsdatasymbolen %s, som används av %s, hittades inte i något av bibliotekensymbolinformation måste föregås av ett huvud (fil %s, rad %s)symbolnamn ej angivet: %ssymbolisk länk till %ssyntaxfel i %s på rad %d: %star inga argument som inte är flaggortarfilen "%s" finns redan, skriver inte över, ger upp, använd -sU eller -sR för att överstyraaktuell version (%s) är tidigare än den föregående (%s)diffen modifierar följande uppströmsfiler: %sden genererade "symbols"-filen är tomhuvudet motsvarar inte det förväntat reguljärt uttryckpatchen har otillåtet fuzz, eller är på fel formatseries-filen (%s) innehåller flaggor som inte stöds ("%s", rad %s); dpkg-source kanske kommer att misslyckas med att tillämpa patcharfilslutet motsvarar inte det förväntat reguljärt uttryckdet finns inte några lokala ändringar att sparaför många substitueringar - rekursivt? - i "%s"försökte slå ihop samma objekt (%s) två gånger i en symfiltvå kommandon angavs: --%s och --%skunde inte ändra beroenden på "%s"kan inte byta katalog till "%s"kunde inte se om "%s" existerarkan inte bestämma %skan inte exekvera %skan inte behålla originalkatalog (finns redan)kunde inte öppna informationsfil för delade bibliotek "%s"kan inte byta namn på %s till %skunde inte byta namn på "%s" (precis skapad) till "%s"kan inte byta namn på "%s" till "%s"kan inte ta status på förmodad uppackad orig "%s"tar bort tillämpning av %sej incheckade, ej ignorerade ändringar i arbetskatalogen: %sovillkorlig överstyrning från paketansvariga för %soväntad slut på diffen "%s"oavslutad OpenPGP-signaturokänd %%-substituering i krok: %%%sokänd funktion %s i variabeln %s: %sokänd Debianarkitektur %s, du måste också ange en GNU-systemtypokänd GNU-systemtyp %s, du måste också ange en Debianarkitekturokänd förvald GNU-systemtyp för Debianarkitektur %sokänd filtypokänt namn på hake: %sokänd värdarkitektur "%s"okänt informationsfält "%s" i indata i %sokänt nyckelvärde %sokänd rad från diff -u på %s: "%s"okänd flagga "%s"okänd flagga eller argument %sokända utdata från dpkg --search: "%s"mål för uppackning finns redan: %suppackad orig "%s" finns men är inte en katalogpackar upp %sokänt beroendefält "%s"okänd fil för ett %s-källkodspaket: %sokänd fil i ett Debianeget källkodspaket: %sokänd radändring i källkod kan inte representeraskontrollsumman "%s" stöds ejversionen av quilt-metadata stöds inte: %soönskad binärfil: %suppströmsfiler som har ändrats: %sanvänd den nyaste post som är tidigare än den angivnaanvänd den äldsta posten som är senare än den angivnaanvänd formatet "3.0 (quilt)" för att ha separata och dokumenterade ändringar på uppströmsfiler, se dpkg-source(1)använder ett gain-root-command fast jag redan är rootanvänder flaggor från %s: %sanvänder källkodsformatet "%s"leverantören %s finns inte i %sdistributörsfilversionen "%s" är ogiltig: %sversionsnumret kan inte vara tomtversionsnummer innehåller ogiltigt tecken "%s"versionsnumret börjar inte med en siffraväntar på %svarningskriv omdirigeringsinformation på standard felskrivfel i styrdataskriv på tar-indatadu kan integrera de lokala ändringarna med %sdu kan bara ange en av "from" och "since", använder "since"du kan bara ange en av "to" och "until", använder "until"du kan inte kombinera "count" eller "offset" med andra intervallflaggordu kan inte använda symver-taggen för att fånga symboler som inte är versionerade: %s
\ No newline at end of file
diff -Naurp dpkg-1.20.7.1-orig/scripts/README.cpan dpkg-1.20.7.1/scripts/README.cpan
--- dpkg-1.20.7.1-orig/scripts/README.cpan	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/scripts/README.cpan	2021-06-09 18:24:51.980468360 -0500
@@ -0,0 +1,5 @@
+This archive contains the CPAN distribution for Dpkg, which
+is part of the dpkg project.
+
+Only the perl modules are included. The rest of the content can be found in
+the original upstream source code, from <https://wiki.debian.org/Teams/Dpkg>.
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/archives.Po dpkg-1.20.7.1/src/.deps/archives.Po
--- dpkg-1.20.7.1-orig/src/.deps/archives.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/archives.Po	2021-06-09 18:25:10.310496339 -0500
@@ -0,0 +1,326 @@
+archives.o: archives.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/time.h \
+ /usr/include/sys/stat.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/errno.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ /usr/include/time.h /usr/include/bits/time.h /usr/include/bits/timex.h \
+ /usr/include/bits/types/struct_tm.h \
+ /usr/include/bits/types/struct_itimerspec.h /usr/include/fcntl.h \
+ /usr/include/bits/fcntl.h /usr/include/bits/fcntl-linux.h \
+ /usr/include/bits/types/struct_iovec.h /usr/include/linux/falloc.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h /usr/include/obstack.h ../lib/dpkg/i18n.h \
+ ../lib/dpkg/macros.h ../lib/compat/gettext.h /usr/include/libintl.h \
+ /usr/include/locale.h /usr/include/bits/locale.h ../lib/dpkg/dpkg.h \
+ ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/pkg.h \
+ ../lib/dpkg/path.h ../lib/dpkg/fdio.h ../lib/dpkg/buffer.h \
+ ../lib/dpkg/subproc.h ../lib/dpkg/command.h ../lib/dpkg/file.h \
+ ../lib/dpkg/treewalk.h ../lib/dpkg/tarfn.h ../lib/dpkg/options.h \
+ ../lib/dpkg/triglib.h ../lib/dpkg/fsys.h ../lib/dpkg/db-ctrl.h \
+ ../lib/dpkg/db-fsys.h main.h ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h \
+ force.h archives.h filters.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/time.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/time.h:
+
+/usr/include/bits/time.h:
+
+/usr/include/bits/timex.h:
+
+/usr/include/bits/types/struct_tm.h:
+
+/usr/include/bits/types/struct_itimerspec.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+/usr/include/obstack.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/pkg.h:
+
+../lib/dpkg/path.h:
+
+../lib/dpkg/fdio.h:
+
+../lib/dpkg/buffer.h:
+
+../lib/dpkg/subproc.h:
+
+../lib/dpkg/command.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/treewalk.h:
+
+../lib/dpkg/tarfn.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/triglib.h:
+
+../lib/dpkg/fsys.h:
+
+../lib/dpkg/db-ctrl.h:
+
+../lib/dpkg/db-fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
+
+archives.h:
+
+filters.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/cleanup.Po dpkg-1.20.7.1/src/.deps/cleanup.Po
--- dpkg-1.20.7.1-orig/src/.deps/cleanup.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/cleanup.Po	2021-06-09 18:25:10.407496487 -0500
@@ -0,0 +1,305 @@
+cleanup.o: cleanup.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/time.h /usr/include/bits/time.h \
+ /usr/include/bits/timex.h /usr/include/bits/types/struct_tm.h \
+ /usr/include/bits/types/struct_itimerspec.h /usr/include/utime.h \
+ /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/pkg.h \
+ ../lib/dpkg/path.h ../lib/dpkg/options.h ../lib/dpkg/db-fsys.h \
+ ../lib/dpkg/file.h ../lib/dpkg/fsys.h main.h ../lib/dpkg/debug.h \
+ ../lib/dpkg/pkg-list.h force.h archives.h ../lib/dpkg/tarfn.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/time.h:
+
+/usr/include/bits/time.h:
+
+/usr/include/bits/timex.h:
+
+/usr/include/bits/types/struct_tm.h:
+
+/usr/include/bits/types/struct_itimerspec.h:
+
+/usr/include/utime.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/pkg.h:
+
+../lib/dpkg/path.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
+
+archives.h:
+
+../lib/dpkg/tarfn.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/configure.Po dpkg-1.20.7.1/src/.deps/configure.Po
--- dpkg-1.20.7.1-orig/src/.deps/configure.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/configure.Po	2021-06-09 18:25:10.608496794 -0500
@@ -0,0 +1,409 @@
+configure.o: configure.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h \
+ /usr/include/sys/wait.h /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/ctype.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/strings.h \
+ /usr/include/time.h /usr/include/bits/time.h /usr/include/bits/timex.h \
+ /usr/include/bits/types/struct_tm.h \
+ /usr/include/bits/types/struct_itimerspec.h /usr/include/fcntl.h \
+ /usr/include/bits/fcntl.h /usr/include/bits/fcntl-linux.h \
+ /usr/include/bits/types/struct_iovec.h /usr/include/linux/falloc.h \
+ /usr/include/dirent.h /usr/include/bits/dirent.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/termios.h \
+ /usr/include/bits/termios.h /usr/include/bits/termios-struct.h \
+ /usr/include/bits/termios-c_cc.h /usr/include/bits/termios-c_iflag.h \
+ /usr/include/bits/termios-c_oflag.h /usr/include/bits/termios-baud.h \
+ /usr/include/bits/termios-c_cflag.h /usr/include/bits/termios-c_lflag.h \
+ /usr/include/bits/termios-tcflow.h /usr/include/bits/termios-misc.h \
+ /usr/include/sys/ttydefaults.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h /usr/include/stdlib.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/macros.h ../lib/dpkg/i18n.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/pkg.h \
+ ../lib/dpkg/buffer.h ../lib/dpkg/file.h ../lib/dpkg/path.h \
+ ../lib/dpkg/subproc.h ../lib/dpkg/command.h ../lib/dpkg/pager.h \
+ ../lib/dpkg/triglib.h ../lib/dpkg/fsys.h ../lib/dpkg/db-fsys.h main.h \
+ ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h force.h ../lib/dpkg/options.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/sys/wait.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/ctype.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
+
+/usr/include/time.h:
+
+/usr/include/bits/time.h:
+
+/usr/include/bits/timex.h:
+
+/usr/include/bits/types/struct_tm.h:
+
+/usr/include/bits/types/struct_itimerspec.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/termios.h:
+
+/usr/include/bits/termios.h:
+
+/usr/include/bits/termios-struct.h:
+
+/usr/include/bits/termios-c_cc.h:
+
+/usr/include/bits/termios-c_iflag.h:
+
+/usr/include/bits/termios-c_oflag.h:
+
+/usr/include/bits/termios-baud.h:
+
+/usr/include/bits/termios-c_cflag.h:
+
+/usr/include/bits/termios-c_lflag.h:
+
+/usr/include/bits/termios-tcflow.h:
+
+/usr/include/bits/termios-misc.h:
+
+/usr/include/sys/ttydefaults.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/macros.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/pkg.h:
+
+../lib/dpkg/buffer.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/path.h:
+
+../lib/dpkg/subproc.h:
+
+../lib/dpkg/command.h:
+
+../lib/dpkg/pager.h:
+
+../lib/dpkg/triglib.h:
+
+../lib/dpkg/fsys.h:
+
+../lib/dpkg/db-fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
+
+../lib/dpkg/options.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/depcon.Po dpkg-1.20.7.1/src/.deps/depcon.Po
--- dpkg-1.20.7.1-orig/src/.deps/depcon.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/depcon.Po	2021-06-09 18:25:10.774497047 -0500
@@ -0,0 +1,260 @@
+depcon.o: depcon.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/stdlib.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h /usr/include/string.h /usr/include/strings.h \
+ ../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/db-ctrl.h \
+ ../lib/dpkg/db-fsys.h ../lib/dpkg/file.h ../lib/dpkg/fsys.h main.h \
+ ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h force.h ../lib/dpkg/options.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/db-ctrl.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
+
+../lib/dpkg/options.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/divertcmd.Po dpkg-1.20.7.1/src/.deps/divertcmd.Po
--- dpkg-1.20.7.1-orig/src/.deps/divertcmd.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/divertcmd.Po	2021-06-09 18:25:12.870500247 -0500
@@ -0,0 +1,269 @@
+divertcmd.o: divertcmd.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/fnmatch.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/strings.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ ../lib/dpkg/i18n.h ../lib/dpkg/macros.h ../lib/compat/gettext.h \
+ /usr/include/libintl.h ../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/file.h \
+ ../lib/dpkg/glob.h ../lib/dpkg/buffer.h ../lib/dpkg/options.h \
+ ../lib/dpkg/db-fsys.h ../lib/dpkg/fsys.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/fnmatch.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/glob.h:
+
+../lib/dpkg/buffer.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/fsys.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/enquiry.Po dpkg-1.20.7.1/src/.deps/enquiry.Po
--- dpkg-1.20.7.1-orig/src/.deps/enquiry.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/enquiry.Po	2021-06-09 18:25:10.956497325 -0500
@@ -0,0 +1,261 @@
+enquiry.o: enquiry.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/bits/stat.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h ../lib/dpkg/program.h \
+ ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h ../lib/dpkg/version.h \
+ ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h \
+ ../lib/dpkg/error.h ../lib/dpkg/pkg-array.h ../lib/dpkg/pkg.h \
+ ../lib/dpkg/pkg-show.h ../lib/dpkg/triglib.h ../lib/dpkg/fsys.h \
+ ../lib/dpkg/file.h ../lib/dpkg/options.h ../lib/dpkg/db-ctrl.h \
+ ../lib/dpkg/db-fsys.h main.h ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h \
+ force.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/pkg-array.h:
+
+../lib/dpkg/pkg.h:
+
+../lib/dpkg/pkg-show.h:
+
+../lib/dpkg/triglib.h:
+
+../lib/dpkg/fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/db-ctrl.h:
+
+../lib/dpkg/db-fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/errors.Po dpkg-1.20.7.1/src/.deps/errors.Po
--- dpkg-1.20.7.1-orig/src/.deps/errors.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/errors.Po	2021-06-09 18:25:11.018497420 -0500
@@ -0,0 +1,333 @@
+errors.o: errors.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h \
+ /usr/include/sys/wait.h /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ /usr/include/dirent.h /usr/include/bits/dirent.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/options.h main.h \
+ ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h force.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/sys/wait.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/options.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/file-match.Po dpkg-1.20.7.1/src/.deps/file-match.Po
--- dpkg-1.20.7.1-orig/src/.deps/file-match.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/file-match.Po	2021-06-09 18:25:11.048497465 -0500
@@ -0,0 +1,170 @@
+file-match.o: file-match.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/macros.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h file-match.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/macros.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+file-match.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/filters.Po dpkg-1.20.7.1/src/.deps/filters.Po
--- dpkg-1.20.7.1-orig/src/.deps/filters.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/filters.Po	2021-06-09 18:25:11.092497532 -0500
@@ -0,0 +1,217 @@
+filters.o: filters.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/fnmatch.h ../lib/dpkg/i18n.h \
+ ../lib/dpkg/macros.h ../lib/compat/gettext.h /usr/include/libintl.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/strings.h ../lib/dpkg/dpkg.h /usr/include/sys/types.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/db-fsys.h \
+ ../lib/dpkg/file.h ../lib/dpkg/fsys.h main.h ../lib/dpkg/debug.h \
+ ../lib/dpkg/pkg-list.h force.h ../lib/dpkg/options.h filters.h \
+ ../lib/dpkg/tarfn.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/fnmatch.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
+
+../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
+
+../lib/dpkg/options.h:
+
+filters.h:
+
+../lib/dpkg/tarfn.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/force.Po dpkg-1.20.7.1/src/.deps/force.Po
--- dpkg-1.20.7.1-orig/src/.deps/force.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/force.Po	2021-06-09 18:25:11.163497641 -0500
@@ -0,0 +1,223 @@
+force.o: force.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/errno.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/sys/types.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h /usr/include/bits/types/__fpos_t.h \
+ /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/macros.h ../lib/dpkg/i18n.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h ../lib/dpkg/program.h \
+ ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h ../lib/dpkg/version.h \
+ ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h \
+ ../lib/dpkg/error.h ../lib/dpkg/options.h force.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/errno.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/macros.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/options.h:
+
+force.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/help.Po dpkg-1.20.7.1/src/.deps/help.Po
--- dpkg-1.20.7.1-orig/src/.deps/help.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/help.Po	2021-06-09 18:25:11.261497790 -0500
@@ -0,0 +1,260 @@
+help.o: help.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/path.h \
+ ../lib/dpkg/db-fsys.h ../lib/dpkg/file.h ../lib/dpkg/fsys.h main.h \
+ ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h force.h ../lib/dpkg/options.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/path.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
+
+../lib/dpkg/options.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/main.Po dpkg-1.20.7.1/src/.deps/main.Po
--- dpkg-1.20.7.1-orig/src/.deps/main.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/main.Po	2021-06-09 18:25:11.406498012 -0500
@@ -0,0 +1,374 @@
+main.o: main.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/wait.h \
+ /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/string.h /usr/include/strings.h /usr/include/fcntl.h \
+ /usr/include/bits/fcntl.h /usr/include/bits/fcntl-linux.h \
+ /usr/include/bits/types/struct_iovec.h /usr/include/linux/falloc.h \
+ /usr/include/bits/stat.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdlib.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/macros.h ../lib/dpkg/i18n.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h ../lib/dpkg/c-ctype.h \
+ ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h \
+ ../lib/dpkg/varbuf.h ../lib/dpkg/version.h ../lib/dpkg/arch.h \
+ ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h ../lib/dpkg/error.h \
+ ../lib/dpkg/subproc.h ../lib/dpkg/command.h ../lib/dpkg/pager.h \
+ ../lib/dpkg/options.h ../lib/dpkg/db-fsys.h ../lib/dpkg/file.h \
+ ../lib/dpkg/fsys.h main.h ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h \
+ force.h filters.h ../lib/dpkg/tarfn.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/wait.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/macros.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+../lib/dpkg/c-ctype.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/subproc.h:
+
+../lib/dpkg/command.h:
+
+../lib/dpkg/pager.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
+
+filters.h:
+
+../lib/dpkg/tarfn.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/packages.Po dpkg-1.20.7.1/src/.deps/packages.Po
--- dpkg-1.20.7.1-orig/src/.deps/packages.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/packages.Po	2021-06-09 18:25:11.576498271 -0500
@@ -0,0 +1,271 @@
+packages.o: packages.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h /usr/include/bits/posix1_lim.h \
+ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/pkg-list.h \
+ ../lib/dpkg/pkg-queue.h ../lib/dpkg/options.h ../lib/dpkg/db-ctrl.h \
+ ../lib/dpkg/db-fsys.h ../lib/dpkg/file.h ../lib/dpkg/fsys.h main.h \
+ ../lib/dpkg/debug.h force.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/pkg-list.h:
+
+../lib/dpkg/pkg-queue.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/db-ctrl.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+force.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/perpkgstate.Po dpkg-1.20.7.1/src/.deps/perpkgstate.Po
--- dpkg-1.20.7.1-orig/src/.deps/perpkgstate.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/perpkgstate.Po	2021-06-09 18:25:11.613498328 -0500
@@ -0,0 +1,180 @@
+perpkgstate.o: perpkgstate.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h ../lib/dpkg/dpkg.h /usr/include/sys/types.h \
+ /usr/include/features.h /usr/include/sys/cdefs.h \
+ /usr/include/bits/wordsize.h /usr/include/bits/long-double.h \
+ /usr/include/gnu/stubs.h /usr/include/gnu/stubs-64.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/stdio.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/macros.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ /usr/include/string.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/strings.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h main.h ../lib/dpkg/debug.h \
+ ../lib/dpkg/pkg-list.h force.h ../lib/dpkg/options.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/stdio.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/macros.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
+
+../lib/dpkg/options.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/querycmd.Po dpkg-1.20.7.1/src/.deps/querycmd.Po
--- dpkg-1.20.7.1-orig/src/.deps/querycmd.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/querycmd.Po	2021-06-09 18:25:13.190500735 -0500
@@ -0,0 +1,320 @@
+querycmd.o: querycmd.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/locale.h \
+ /usr/include/bits/locale.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h \
+ /usr/include/limits.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h /usr/include/bits/posix2_lim.h \
+ /usr/include/bits/xopen_lim.h /usr/include/bits/uio_lim.h \
+ /usr/include/string.h /usr/include/strings.h /usr/include/fcntl.h \
+ /usr/include/bits/fcntl.h /usr/include/bits/fcntl-linux.h \
+ /usr/include/bits/types/struct_iovec.h /usr/include/linux/falloc.h \
+ /usr/include/dirent.h /usr/include/bits/dirent.h /usr/include/fnmatch.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h ../lib/dpkg/dpkg.h \
+ ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/pkg-array.h \
+ ../lib/dpkg/pkg.h ../lib/dpkg/pkg-spec.h ../lib/dpkg/pkg-format.h \
+ ../lib/dpkg/pkg-show.h ../lib/dpkg/path.h ../lib/dpkg/file.h \
+ ../lib/dpkg/pager.h ../lib/dpkg/options.h ../lib/dpkg/db-ctrl.h \
+ ../lib/dpkg/db-fsys.h ../lib/dpkg/fsys.h main.h ../lib/dpkg/debug.h \
+ ../lib/dpkg/pkg-list.h force.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/limits.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include-fixed/syslimits.h:
+
+/usr/include/limits.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/bits/posix2_lim.h:
+
+/usr/include/bits/xopen_lim.h:
+
+/usr/include/bits/uio_lim.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/fnmatch.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/pkg-array.h:
+
+../lib/dpkg/pkg.h:
+
+../lib/dpkg/pkg-spec.h:
+
+../lib/dpkg/pkg-format.h:
+
+../lib/dpkg/pkg-show.h:
+
+../lib/dpkg/path.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/pager.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/db-ctrl.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/remove.Po dpkg-1.20.7.1/src/.deps/remove.Po
--- dpkg-1.20.7.1-orig/src/.deps/remove.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/remove.Po	2021-06-09 18:25:11.782498586 -0500
@@ -0,0 +1,297 @@
+remove.o: remove.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h /usr/include/bits/posix1_lim.h \
+ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h \
+ ../lib/dpkg/varbuf.h ../lib/dpkg/version.h ../lib/dpkg/arch.h \
+ ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h ../lib/dpkg/error.h \
+ ../lib/dpkg/pkg.h ../lib/dpkg/path.h ../lib/dpkg/dir.h \
+ ../lib/dpkg/options.h ../lib/dpkg/triglib.h ../lib/dpkg/fsys.h \
+ ../lib/dpkg/file.h ../lib/dpkg/db-ctrl.h ../lib/dpkg/db-fsys.h main.h \
+ ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h force.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/pkg.h:
+
+../lib/dpkg/path.h:
+
+../lib/dpkg/dir.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/triglib.h:
+
+../lib/dpkg/fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/db-ctrl.h:
+
+../lib/dpkg/db-fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/script.Po dpkg-1.20.7.1/src/.deps/script.Po
--- dpkg-1.20.7.1-orig/src/.deps/script.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/script.Po	2021-06-09 18:25:11.890498751 -0500
@@ -0,0 +1,270 @@
+script.o: script.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/debug.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h ../lib/dpkg/program.h \
+ ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h ../lib/dpkg/version.h \
+ ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h \
+ ../lib/dpkg/error.h ../lib/dpkg/pkg.h ../lib/dpkg/subproc.h \
+ ../lib/dpkg/command.h ../lib/dpkg/triglib.h ../lib/dpkg/fsys.h \
+ ../lib/dpkg/file.h ../lib/dpkg/db-ctrl.h ../lib/dpkg/db-fsys.h main.h \
+ ../lib/dpkg/pkg-list.h force.h ../lib/dpkg/options.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/debug.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/pkg.h:
+
+../lib/dpkg/subproc.h:
+
+../lib/dpkg/command.h:
+
+../lib/dpkg/triglib.h:
+
+../lib/dpkg/fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/db-ctrl.h:
+
+../lib/dpkg/db-fsys.h:
+
+main.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
+
+../lib/dpkg/options.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/select.Po dpkg-1.20.7.1/src/.deps/select.Po
--- dpkg-1.20.7.1-orig/src/.deps/select.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/select.Po	2021-06-09 18:25:11.971498874 -0500
@@ -0,0 +1,235 @@
+select.o: select.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/fnmatch.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h \
+ ../lib/dpkg/varbuf.h ../lib/dpkg/version.h ../lib/dpkg/arch.h \
+ ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h ../lib/dpkg/error.h \
+ ../lib/dpkg/pkg-array.h ../lib/dpkg/pkg.h ../lib/dpkg/pkg-show.h \
+ ../lib/dpkg/pkg-spec.h ../lib/dpkg/options.h ../lib/dpkg/db-ctrl.h \
+ ../lib/dpkg/db-fsys.h ../lib/dpkg/file.h ../lib/dpkg/fsys.h main.h \
+ ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h force.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/fnmatch.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/pkg-array.h:
+
+../lib/dpkg/pkg.h:
+
+../lib/dpkg/pkg-show.h:
+
+../lib/dpkg/pkg-spec.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/db-ctrl.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/selinux.Po dpkg-1.20.7.1/src/.deps/selinux.Po
--- dpkg-1.20.7.1-orig/src/.deps/selinux.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/selinux.Po	2021-06-09 18:25:12.006498928 -0500
@@ -0,0 +1,231 @@
+selinux.o: selinux.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ ../lib/dpkg/i18n.h ../lib/dpkg/macros.h ../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/strings.h ../lib/dpkg/dpkg.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h main.h ../lib/dpkg/debug.h \
+ ../lib/dpkg/pkg-list.h force.h ../lib/dpkg/options.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
+
+../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
+
+../lib/dpkg/options.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/statcmd.Po dpkg-1.20.7.1/src/.deps/statcmd.Po
--- dpkg-1.20.7.1-orig/src/.deps/statcmd.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/statcmd.Po	2021-06-09 18:25:13.406501065 -0500
@@ -0,0 +1,284 @@
+statcmd.o: statcmd.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/strings.h /usr/include/grp.h /usr/include/bits/types/FILE.h \
+ /usr/include/pwd.h /usr/include/fnmatch.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h ../lib/dpkg/dpkg.h \
+ ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/path.h \
+ ../lib/dpkg/dir.h /usr/include/dirent.h /usr/include/bits/dirent.h \
+ /usr/include/bits/posix1_lim.h /usr/include/bits/local_lim.h \
+ /usr/include/linux/limits.h ../lib/dpkg/glob.h ../lib/dpkg/db-fsys.h \
+ ../lib/dpkg/file.h ../lib/dpkg/fsys.h ../lib/dpkg/options.h force.h \
+ main.h ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
+
+/usr/include/grp.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/pwd.h:
+
+/usr/include/fnmatch.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/path.h:
+
+../lib/dpkg/dir.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+../lib/dpkg/glob.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/fsys.h:
+
+../lib/dpkg/options.h:
+
+force.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/trigcmd.Po dpkg-1.20.7.1/src/.deps/trigcmd.Po
--- dpkg-1.20.7.1-orig/src/.deps/trigcmd.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/trigcmd.Po	2021-06-09 18:25:13.576501325 -0500
@@ -0,0 +1,245 @@
+trigcmd.o: trigcmd.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/fcntl.h \
+ /usr/include/bits/fcntl.h /usr/include/bits/fcntl-linux.h \
+ /usr/include/bits/types/struct_iovec.h /usr/include/linux/falloc.h \
+ /usr/include/bits/stat.h /usr/include/locale.h \
+ /usr/include/bits/locale.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/strings.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/include/stdlib.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h ../lib/dpkg/dpkg.h \
+ ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h /usr/include/setjmp.h \
+ /usr/include/bits/setjmp.h ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/options.h \
+ ../lib/dpkg/trigdeferred.h ../lib/dpkg/triglib.h ../lib/dpkg/fsys.h \
+ ../lib/dpkg/file.h ../lib/dpkg/pkg-spec.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/trigdeferred.h:
+
+../lib/dpkg/triglib.h:
+
+../lib/dpkg/fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/pkg-spec.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/trigproc.Po dpkg-1.20.7.1/src/.deps/trigproc.Po
--- dpkg-1.20.7.1-orig/src/.deps/trigproc.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/trigproc.Po	2021-06-09 18:25:12.109499085 -0500
@@ -0,0 +1,247 @@
+trigproc.o: trigproc.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/stat.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/stat.h \
+ /usr/include/bits/statx.h /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/linux/falloc.h /usr/include/stdlib.h \
+ /usr/include/bits/libc-header-start.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/bits/floatn.h \
+ /usr/include/bits/floatn-common.h /usr/include/bits/types/locale_t.h \
+ /usr/include/bits/types/__locale_t.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ ../lib/dpkg/i18n.h ../lib/dpkg/macros.h ../lib/compat/gettext.h \
+ /usr/include/libintl.h /usr/include/locale.h /usr/include/bits/locale.h \
+ /usr/include/string.h /usr/include/strings.h ../lib/dpkg/dpkg.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/pkg.h \
+ ../lib/dpkg/pkg-queue.h ../lib/dpkg/pkg-list.h ../lib/dpkg/db-ctrl.h \
+ ../lib/dpkg/db-fsys.h ../lib/dpkg/file.h ../lib/dpkg/fsys.h \
+ ../lib/dpkg/triglib.h main.h ../lib/dpkg/debug.h force.h \
+ ../lib/dpkg/options.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+/usr/include/string.h:
+
+/usr/include/strings.h:
+
+../lib/dpkg/dpkg.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/pkg.h:
+
+../lib/dpkg/pkg-queue.h:
+
+../lib/dpkg/pkg-list.h:
+
+../lib/dpkg/db-ctrl.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/fsys.h:
+
+../lib/dpkg/triglib.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+force.h:
+
+../lib/dpkg/options.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/unpack.Po dpkg-1.20.7.1/src/.deps/unpack.Po
--- dpkg-1.20.7.1-orig/src/.deps/unpack.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/unpack.Po	2021-06-09 18:25:12.432499578 -0500
@@ -0,0 +1,390 @@
+unpack.o: unpack.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/sys/types.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/types.h \
+ /usr/include/bits/timesize.h /usr/include/bits/typesizes.h \
+ /usr/include/bits/time64.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/sys/stat.h \
+ /usr/include/bits/stat.h /usr/include/bits/statx.h \
+ /usr/include/sys/wait.h /usr/include/signal.h /usr/include/bits/signum.h \
+ /usr/include/bits/signum-generic.h \
+ /usr/include/bits/types/sig_atomic_t.h \
+ /usr/include/bits/types/siginfo_t.h /usr/include/bits/types/__sigval_t.h \
+ /usr/include/bits/siginfo-arch.h /usr/include/bits/siginfo-consts.h \
+ /usr/include/bits/siginfo-consts-arch.h \
+ /usr/include/bits/types/sigval_t.h /usr/include/bits/types/sigevent_t.h \
+ /usr/include/bits/sigevent-consts.h /usr/include/bits/sigaction.h \
+ /usr/include/bits/sigcontext.h /usr/include/bits/types/stack_t.h \
+ /usr/include/sys/ucontext.h /usr/include/bits/sigstack.h \
+ /usr/include/bits/ss_flags.h /usr/include/bits/types/struct_sigstack.h \
+ /usr/include/bits/sigthread.h /usr/include/bits/waitflags.h \
+ /usr/include/bits/waitstatus.h /usr/include/errno.h \
+ /usr/include/bits/errno.h /usr/include/linux/errno.h \
+ /usr/include/asm/errno.h /usr/include/asm-generic/errno.h \
+ /usr/include/asm-generic/errno-base.h /usr/include/bits/types/error_t.h \
+ /usr/include/string.h /usr/include/bits/libc-header-start.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/time.h /usr/include/bits/time.h \
+ /usr/include/bits/timex.h /usr/include/bits/types/struct_tm.h \
+ /usr/include/bits/types/struct_itimerspec.h /usr/include/utime.h \
+ /usr/include/fcntl.h /usr/include/bits/fcntl.h \
+ /usr/include/bits/fcntl-linux.h /usr/include/bits/types/struct_iovec.h \
+ /usr/include/linux/falloc.h /usr/include/dirent.h \
+ /usr/include/bits/dirent.h /usr/include/bits/posix1_lim.h \
+ /usr/include/bits/local_lim.h /usr/include/linux/limits.h \
+ /usr/include/unistd.h /usr/include/bits/posix_opt.h \
+ /usr/include/bits/environments.h /usr/include/bits/confname.h \
+ /usr/include/bits/getopt_posix.h /usr/include/bits/getopt_core.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h \
+ /usr/include/stdint.h /usr/include/bits/wchar.h \
+ /usr/include/bits/stdint-uintn.h /usr/include/stdlib.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/alloca.h /usr/include/bits/stdlib-bsearch.h \
+ /usr/include/bits/stdlib-float.h /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/c-ctype.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h ../lib/dpkg/ehandle.h \
+ /usr/include/setjmp.h /usr/include/bits/setjmp.h ../lib/dpkg/report.h \
+ ../lib/dpkg/string.h ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h \
+ ../lib/dpkg/varbuf.h ../lib/dpkg/version.h ../lib/dpkg/arch.h \
+ ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h ../lib/dpkg/error.h \
+ ../lib/dpkg/pkg.h ../lib/dpkg/pkg-queue.h ../lib/dpkg/pkg-list.h \
+ ../lib/dpkg/path.h ../lib/dpkg/buffer.h ../lib/dpkg/subproc.h \
+ ../lib/dpkg/dir.h ../lib/dpkg/tarfn.h ../lib/dpkg/file.h \
+ ../lib/dpkg/options.h ../lib/dpkg/db-ctrl.h ../lib/dpkg/db-fsys.h \
+ ../lib/dpkg/fsys.h ../lib/dpkg/triglib.h file-match.h main.h \
+ ../lib/dpkg/debug.h force.h archives.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/sys/stat.h:
+
+/usr/include/bits/stat.h:
+
+/usr/include/bits/statx.h:
+
+/usr/include/sys/wait.h:
+
+/usr/include/signal.h:
+
+/usr/include/bits/signum.h:
+
+/usr/include/bits/signum-generic.h:
+
+/usr/include/bits/types/sig_atomic_t.h:
+
+/usr/include/bits/types/siginfo_t.h:
+
+/usr/include/bits/types/__sigval_t.h:
+
+/usr/include/bits/siginfo-arch.h:
+
+/usr/include/bits/siginfo-consts.h:
+
+/usr/include/bits/siginfo-consts-arch.h:
+
+/usr/include/bits/types/sigval_t.h:
+
+/usr/include/bits/types/sigevent_t.h:
+
+/usr/include/bits/sigevent-consts.h:
+
+/usr/include/bits/sigaction.h:
+
+/usr/include/bits/sigcontext.h:
+
+/usr/include/bits/types/stack_t.h:
+
+/usr/include/sys/ucontext.h:
+
+/usr/include/bits/sigstack.h:
+
+/usr/include/bits/ss_flags.h:
+
+/usr/include/bits/types/struct_sigstack.h:
+
+/usr/include/bits/sigthread.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/errno.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/time.h:
+
+/usr/include/bits/time.h:
+
+/usr/include/bits/timex.h:
+
+/usr/include/bits/types/struct_tm.h:
+
+/usr/include/bits/types/struct_itimerspec.h:
+
+/usr/include/utime.h:
+
+/usr/include/fcntl.h:
+
+/usr/include/bits/fcntl.h:
+
+/usr/include/bits/fcntl-linux.h:
+
+/usr/include/bits/types/struct_iovec.h:
+
+/usr/include/linux/falloc.h:
+
+/usr/include/dirent.h:
+
+/usr/include/bits/dirent.h:
+
+/usr/include/bits/posix1_lim.h:
+
+/usr/include/bits/local_lim.h:
+
+/usr/include/linux/limits.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdint.h:
+
+/usr/include/stdint.h:
+
+/usr/include/bits/wchar.h:
+
+/usr/include/bits/stdint-uintn.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/c-ctype.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/pkg.h:
+
+../lib/dpkg/pkg-queue.h:
+
+../lib/dpkg/pkg-list.h:
+
+../lib/dpkg/path.h:
+
+../lib/dpkg/buffer.h:
+
+../lib/dpkg/subproc.h:
+
+../lib/dpkg/dir.h:
+
+../lib/dpkg/tarfn.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/db-ctrl.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/fsys.h:
+
+../lib/dpkg/triglib.h:
+
+file-match.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+force.h:
+
+archives.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/update.Po dpkg-1.20.7.1/src/.deps/update.Po
--- dpkg-1.20.7.1-orig/src/.deps/update.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/update.Po	2021-06-09 18:25:12.509499696 -0500
@@ -0,0 +1,244 @@
+update.o: update.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/errno.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h /usr/include/bits/errno.h \
+ /usr/include/linux/errno.h /usr/include/asm/errno.h \
+ /usr/include/asm-generic/errno.h /usr/include/asm-generic/errno-base.h \
+ /usr/include/bits/types/error_t.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h /usr/include/unistd.h \
+ /usr/include/bits/posix_opt.h /usr/include/bits/environments.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/confname.h /usr/include/bits/getopt_posix.h \
+ /usr/include/bits/getopt_core.h /usr/include/stdlib.h \
+ /usr/include/bits/waitflags.h /usr/include/bits/waitstatus.h \
+ /usr/include/bits/floatn.h /usr/include/bits/floatn-common.h \
+ /usr/include/sys/types.h /usr/include/bits/types/clock_t.h \
+ /usr/include/bits/types/clockid_t.h /usr/include/bits/types/time_t.h \
+ /usr/include/bits/types/timer_t.h /usr/include/bits/stdint-intn.h \
+ /usr/include/endian.h /usr/include/bits/endian.h \
+ /usr/include/bits/byteswap.h /usr/include/bits/uintn-identity.h \
+ /usr/include/sys/select.h /usr/include/bits/select.h \
+ /usr/include/bits/types/sigset_t.h /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h /usr/include/alloca.h \
+ /usr/include/bits/stdlib-bsearch.h /usr/include/bits/stdlib-float.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ ../lib/dpkg/program.h ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h \
+ ../lib/dpkg/version.h ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h \
+ ../lib/dpkg/namevalue.h ../lib/dpkg/error.h ../lib/dpkg/options.h main.h \
+ ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h force.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/errno.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/include/bits/errno.h:
+
+/usr/include/linux/errno.h:
+
+/usr/include/asm/errno.h:
+
+/usr/include/asm-generic/errno.h:
+
+/usr/include/asm-generic/errno-base.h:
+
+/usr/include/bits/types/error_t.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/include/unistd.h:
+
+/usr/include/bits/posix_opt.h:
+
+/usr/include/bits/environments.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/confname.h:
+
+/usr/include/bits/getopt_posix.h:
+
+/usr/include/bits/getopt_core.h:
+
+/usr/include/stdlib.h:
+
+/usr/include/bits/waitflags.h:
+
+/usr/include/bits/waitstatus.h:
+
+/usr/include/bits/floatn.h:
+
+/usr/include/bits/floatn-common.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+/usr/include/alloca.h:
+
+/usr/include/bits/stdlib-bsearch.h:
+
+/usr/include/bits/stdlib-float.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/options.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
diff -Naurp dpkg-1.20.7.1-orig/src/.deps/verify.Po dpkg-1.20.7.1/src/.deps/verify.Po
--- dpkg-1.20.7.1-orig/src/.deps/verify.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/.deps/verify.Po	2021-06-09 18:25:12.559499772 -0500
@@ -0,0 +1,202 @@
+verify.o: verify.c /usr/include/stdc-predef.h ../config.h \
+ ../lib/compat/compat.h /usr/include/string.h \
+ /usr/include/bits/libc-header-start.h /usr/include/features.h \
+ /usr/include/sys/cdefs.h /usr/include/bits/wordsize.h \
+ /usr/include/bits/long-double.h /usr/include/gnu/stubs.h \
+ /usr/include/gnu/stubs-64.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h \
+ /usr/include/bits/types/locale_t.h /usr/include/bits/types/__locale_t.h \
+ /usr/include/strings.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h \
+ /usr/include/stdio.h \
+ /usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h \
+ /usr/include/bits/types.h /usr/include/bits/timesize.h \
+ /usr/include/bits/typesizes.h /usr/include/bits/time64.h \
+ /usr/include/bits/types/__fpos_t.h /usr/include/bits/types/__mbstate_t.h \
+ /usr/include/bits/types/__fpos64_t.h /usr/include/bits/types/__FILE.h \
+ /usr/include/bits/types/FILE.h /usr/include/bits/types/struct_FILE.h \
+ /usr/include/bits/types/cookie_io_functions_t.h \
+ /usr/include/bits/stdio_lim.h /usr/include/bits/sys_errlist.h \
+ /usr/include/bits/stdio.h ../lib/dpkg/i18n.h ../lib/dpkg/macros.h \
+ ../lib/compat/gettext.h /usr/include/libintl.h /usr/include/locale.h \
+ /usr/include/bits/locale.h ../lib/dpkg/dpkg.h /usr/include/sys/types.h \
+ /usr/include/bits/types/clock_t.h /usr/include/bits/types/clockid_t.h \
+ /usr/include/bits/types/time_t.h /usr/include/bits/types/timer_t.h \
+ /usr/include/bits/stdint-intn.h /usr/include/endian.h \
+ /usr/include/bits/endian.h /usr/include/bits/byteswap.h \
+ /usr/include/bits/uintn-identity.h /usr/include/sys/select.h \
+ /usr/include/bits/select.h /usr/include/bits/types/sigset_t.h \
+ /usr/include/bits/types/__sigset_t.h \
+ /usr/include/bits/types/struct_timeval.h \
+ /usr/include/bits/types/struct_timespec.h \
+ /usr/include/bits/pthreadtypes.h /usr/include/bits/thread-shared-types.h \
+ /usr/include/bits/pthreadtypes-arch.h ../lib/dpkg/progname.h \
+ ../lib/dpkg/ehandle.h /usr/include/setjmp.h /usr/include/bits/setjmp.h \
+ ../lib/dpkg/report.h ../lib/dpkg/string.h ../lib/dpkg/program.h \
+ ../lib/dpkg/dpkg-db.h ../lib/dpkg/varbuf.h ../lib/dpkg/version.h \
+ ../lib/dpkg/arch.h ../lib/dpkg/atomic-file.h ../lib/dpkg/namevalue.h \
+ ../lib/dpkg/error.h ../lib/dpkg/options.h ../lib/dpkg/db-ctrl.h \
+ ../lib/dpkg/db-fsys.h ../lib/dpkg/file.h ../lib/dpkg/fsys.h main.h \
+ ../lib/dpkg/debug.h ../lib/dpkg/pkg-list.h force.h
+
+/usr/include/stdc-predef.h:
+
+../config.h:
+
+../lib/compat/compat.h:
+
+/usr/include/string.h:
+
+/usr/include/bits/libc-header-start.h:
+
+/usr/include/features.h:
+
+/usr/include/sys/cdefs.h:
+
+/usr/include/bits/wordsize.h:
+
+/usr/include/bits/long-double.h:
+
+/usr/include/gnu/stubs.h:
+
+/usr/include/gnu/stubs-64.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stddef.h:
+
+/usr/include/bits/types/locale_t.h:
+
+/usr/include/bits/types/__locale_t.h:
+
+/usr/include/strings.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdbool.h:
+
+/usr/include/stdio.h:
+
+/usr/lib/gcc/x86_64-pc-linux-gnu/9.1.0/include/stdarg.h:
+
+/usr/include/bits/types.h:
+
+/usr/include/bits/timesize.h:
+
+/usr/include/bits/typesizes.h:
+
+/usr/include/bits/time64.h:
+
+/usr/include/bits/types/__fpos_t.h:
+
+/usr/include/bits/types/__mbstate_t.h:
+
+/usr/include/bits/types/__fpos64_t.h:
+
+/usr/include/bits/types/__FILE.h:
+
+/usr/include/bits/types/FILE.h:
+
+/usr/include/bits/types/struct_FILE.h:
+
+/usr/include/bits/types/cookie_io_functions_t.h:
+
+/usr/include/bits/stdio_lim.h:
+
+/usr/include/bits/sys_errlist.h:
+
+/usr/include/bits/stdio.h:
+
+../lib/dpkg/i18n.h:
+
+../lib/dpkg/macros.h:
+
+../lib/compat/gettext.h:
+
+/usr/include/libintl.h:
+
+/usr/include/locale.h:
+
+/usr/include/bits/locale.h:
+
+../lib/dpkg/dpkg.h:
+
+/usr/include/sys/types.h:
+
+/usr/include/bits/types/clock_t.h:
+
+/usr/include/bits/types/clockid_t.h:
+
+/usr/include/bits/types/time_t.h:
+
+/usr/include/bits/types/timer_t.h:
+
+/usr/include/bits/stdint-intn.h:
+
+/usr/include/endian.h:
+
+/usr/include/bits/endian.h:
+
+/usr/include/bits/byteswap.h:
+
+/usr/include/bits/uintn-identity.h:
+
+/usr/include/sys/select.h:
+
+/usr/include/bits/select.h:
+
+/usr/include/bits/types/sigset_t.h:
+
+/usr/include/bits/types/__sigset_t.h:
+
+/usr/include/bits/types/struct_timeval.h:
+
+/usr/include/bits/types/struct_timespec.h:
+
+/usr/include/bits/pthreadtypes.h:
+
+/usr/include/bits/thread-shared-types.h:
+
+/usr/include/bits/pthreadtypes-arch.h:
+
+../lib/dpkg/progname.h:
+
+../lib/dpkg/ehandle.h:
+
+/usr/include/setjmp.h:
+
+/usr/include/bits/setjmp.h:
+
+../lib/dpkg/report.h:
+
+../lib/dpkg/string.h:
+
+../lib/dpkg/program.h:
+
+../lib/dpkg/dpkg-db.h:
+
+../lib/dpkg/varbuf.h:
+
+../lib/dpkg/version.h:
+
+../lib/dpkg/arch.h:
+
+../lib/dpkg/atomic-file.h:
+
+../lib/dpkg/namevalue.h:
+
+../lib/dpkg/error.h:
+
+../lib/dpkg/options.h:
+
+../lib/dpkg/db-ctrl.h:
+
+../lib/dpkg/db-fsys.h:
+
+../lib/dpkg/file.h:
+
+../lib/dpkg/fsys.h:
+
+main.h:
+
+../lib/dpkg/debug.h:
+
+../lib/dpkg/pkg-list.h:
+
+force.h:
diff -Naurp dpkg-1.20.7.1-orig/src/Makefile dpkg-1.20.7.1/src/Makefile
--- dpkg-1.20.7.1-orig/src/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/Makefile	2021-06-09 18:24:52.006468400 -0500
@@ -0,0 +1,967 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# src/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# Variables to be defined:
+#
+#  TEST_VERBOSE - set to 0 (default) or 1 to control test suite verbosity
+#  TEST_PARALLEL - set to 1 (default) or N to control the parallel jobs
+#  TEST_ENV_VARS - environment variables to be set for the test suite
+#  TEST_COVERAGE - set to the perl module in charge of getting test coverage
+#  test_tmpdir - test suite temporary directory
+#  test_scripts - list of test case scripts
+#  test_programs - list of test case programs
+#  test_data - list of test data files
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+bin_PROGRAMS = dpkg$(EXEEXT) dpkg-divert$(EXEEXT) dpkg-query$(EXEEXT) \
+	dpkg-statoverride$(EXEEXT) dpkg-trigger$(EXEEXT)
+subdir = src
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_dpkg_OBJECTS = archives.$(OBJEXT) cleanup.$(OBJEXT) \
+	configure.$(OBJEXT) depcon.$(OBJEXT) enquiry.$(OBJEXT) \
+	errors.$(OBJEXT) file-match.$(OBJEXT) filters.$(OBJEXT) \
+	force.$(OBJEXT) help.$(OBJEXT) main.$(OBJEXT) \
+	packages.$(OBJEXT) perpkgstate.$(OBJEXT) remove.$(OBJEXT) \
+	script.$(OBJEXT) select.$(OBJEXT) selinux.$(OBJEXT) \
+	trigproc.$(OBJEXT) unpack.$(OBJEXT) update.$(OBJEXT) \
+	verify.$(OBJEXT)
+dpkg_OBJECTS = $(am_dpkg_OBJECTS)
+am__DEPENDENCIES_1 =
+am__DEPENDENCIES_2 = ../lib/dpkg/libdpkg.la $(am__DEPENDENCIES_1)
+dpkg_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+am_dpkg_divert_OBJECTS = divertcmd.$(OBJEXT)
+dpkg_divert_OBJECTS = $(am_dpkg_divert_OBJECTS)
+dpkg_divert_LDADD = $(LDADD)
+dpkg_divert_DEPENDENCIES = ../lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+am_dpkg_query_OBJECTS = querycmd.$(OBJEXT)
+dpkg_query_OBJECTS = $(am_dpkg_query_OBJECTS)
+dpkg_query_LDADD = $(LDADD)
+dpkg_query_DEPENDENCIES = ../lib/dpkg/libdpkg.la $(am__DEPENDENCIES_1)
+am_dpkg_statoverride_OBJECTS = force.$(OBJEXT) selinux.$(OBJEXT) \
+	statcmd.$(OBJEXT)
+dpkg_statoverride_OBJECTS = $(am_dpkg_statoverride_OBJECTS)
+dpkg_statoverride_DEPENDENCIES = $(am__DEPENDENCIES_2) \
+	$(am__DEPENDENCIES_1)
+am_dpkg_trigger_OBJECTS = trigcmd.$(OBJEXT)
+dpkg_trigger_OBJECTS = $(am_dpkg_trigger_OBJECTS)
+dpkg_trigger_LDADD = $(LDADD)
+dpkg_trigger_DEPENDENCIES = ../lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/archives.Po ./$(DEPDIR)/cleanup.Po \
+	./$(DEPDIR)/configure.Po ./$(DEPDIR)/depcon.Po \
+	./$(DEPDIR)/divertcmd.Po ./$(DEPDIR)/enquiry.Po \
+	./$(DEPDIR)/errors.Po ./$(DEPDIR)/file-match.Po \
+	./$(DEPDIR)/filters.Po ./$(DEPDIR)/force.Po \
+	./$(DEPDIR)/help.Po ./$(DEPDIR)/main.Po \
+	./$(DEPDIR)/packages.Po ./$(DEPDIR)/perpkgstate.Po \
+	./$(DEPDIR)/querycmd.Po ./$(DEPDIR)/remove.Po \
+	./$(DEPDIR)/script.Po ./$(DEPDIR)/select.Po \
+	./$(DEPDIR)/selinux.Po ./$(DEPDIR)/statcmd.Po \
+	./$(DEPDIR)/trigcmd.Po ./$(DEPDIR)/trigproc.Po \
+	./$(DEPDIR)/unpack.Po ./$(DEPDIR)/update.Po \
+	./$(DEPDIR)/verify.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(dpkg_SOURCES) $(dpkg_divert_SOURCES) $(dpkg_query_SOURCES) \
+	$(dpkg_statoverride_SOURCES) $(dpkg_trigger_SOURCES)
+DIST_SOURCES = $(dpkg_SOURCES) $(dpkg_divert_SOURCES) \
+	$(dpkg_query_SOURCES) $(dpkg_statoverride_SOURCES) \
+	$(dpkg_trigger_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp $(top_srcdir)/check.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/src
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/src
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = $(datadir)/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = $(sysconfdir)/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+AM_CPPFLAGS = \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-DADMINDIR=\"$(admindir)\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+LDADD = \
+	../lib/dpkg/libdpkg.la \
+	$(LIBINTL)
+
+EXTRA_DIST = \
+	$(test_scripts) \
+	$(nil)
+
+dpkg_SOURCES = \
+	archives.c archives.h \
+	cleanup.c \
+	configure.c \
+	depcon.c \
+	enquiry.c \
+	errors.c \
+	file-match.c file-match.h \
+	filters.c filters.h \
+	force.c force.h \
+	help.c \
+	main.c main.h \
+	packages.c \
+	perpkgstate.c \
+	remove.c \
+	script.c \
+	select.c \
+	selinux.c \
+	trigproc.c \
+	unpack.c \
+	update.c \
+	verify.c \
+	$(nil)
+
+dpkg_LDADD = \
+	$(LDADD) \
+	$(SELINUX_LIBS)
+
+dpkg_divert_SOURCES = \
+	divertcmd.c
+
+dpkg_query_SOURCES = \
+	querycmd.c
+
+dpkg_statoverride_SOURCES = \
+	force.c force.h \
+	selinux.c \
+	statcmd.c
+
+dpkg_statoverride_LDADD = \
+	$(LDADD) \
+	$(SELINUX_LIBS)
+
+dpkg_trigger_SOURCES = \
+	trigcmd.c
+
+test_tmpdir = t.tmp
+test_scripts = \
+	t/dpkg_divert.t
+
+TEST_RUNNER = '\
+	my $$harness = TAP::Harness->new({ \
+	    exec => sub { my (undef, $$test) = @_; \
+	        return [ $$test ] if $$test !~ "\.t\$$" and -x $$test; \
+	        return }, \
+	    lib => [ "$(top_srcdir)/scripts", "$(top_srcdir)/dselect/methods"  ], \
+	    color => 1, \
+	    verbosity => $(TEST_VERBOSE), \
+	    jobs => $(TEST_PARALLEL), \
+	    failures => 1, \
+	}); \
+	my $$aggregate = $$harness->runtests(@ARGV); \
+	die "FAIL: test suite has errors\n" if $$aggregate->has_errors;'
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/check.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign src/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+$(top_srcdir)/check.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+dpkg$(EXEEXT): $(dpkg_OBJECTS) $(dpkg_DEPENDENCIES) $(EXTRA_dpkg_DEPENDENCIES) 
+	@rm -f dpkg$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_OBJECTS) $(dpkg_LDADD) $(LIBS)
+
+dpkg-divert$(EXEEXT): $(dpkg_divert_OBJECTS) $(dpkg_divert_DEPENDENCIES) $(EXTRA_dpkg_divert_DEPENDENCIES) 
+	@rm -f dpkg-divert$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_divert_OBJECTS) $(dpkg_divert_LDADD) $(LIBS)
+
+dpkg-query$(EXEEXT): $(dpkg_query_OBJECTS) $(dpkg_query_DEPENDENCIES) $(EXTRA_dpkg_query_DEPENDENCIES) 
+	@rm -f dpkg-query$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_query_OBJECTS) $(dpkg_query_LDADD) $(LIBS)
+
+dpkg-statoverride$(EXEEXT): $(dpkg_statoverride_OBJECTS) $(dpkg_statoverride_DEPENDENCIES) $(EXTRA_dpkg_statoverride_DEPENDENCIES) 
+	@rm -f dpkg-statoverride$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_statoverride_OBJECTS) $(dpkg_statoverride_LDADD) $(LIBS)
+
+dpkg-trigger$(EXEEXT): $(dpkg_trigger_OBJECTS) $(dpkg_trigger_DEPENDENCIES) $(EXTRA_dpkg_trigger_DEPENDENCIES) 
+	@rm -f dpkg-trigger$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_trigger_OBJECTS) $(dpkg_trigger_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/archives.Po # am--include-marker
+include ./$(DEPDIR)/cleanup.Po # am--include-marker
+include ./$(DEPDIR)/configure.Po # am--include-marker
+include ./$(DEPDIR)/depcon.Po # am--include-marker
+include ./$(DEPDIR)/divertcmd.Po # am--include-marker
+include ./$(DEPDIR)/enquiry.Po # am--include-marker
+include ./$(DEPDIR)/errors.Po # am--include-marker
+include ./$(DEPDIR)/file-match.Po # am--include-marker
+include ./$(DEPDIR)/filters.Po # am--include-marker
+include ./$(DEPDIR)/force.Po # am--include-marker
+include ./$(DEPDIR)/help.Po # am--include-marker
+include ./$(DEPDIR)/main.Po # am--include-marker
+include ./$(DEPDIR)/packages.Po # am--include-marker
+include ./$(DEPDIR)/perpkgstate.Po # am--include-marker
+include ./$(DEPDIR)/querycmd.Po # am--include-marker
+include ./$(DEPDIR)/remove.Po # am--include-marker
+include ./$(DEPDIR)/script.Po # am--include-marker
+include ./$(DEPDIR)/select.Po # am--include-marker
+include ./$(DEPDIR)/selinux.Po # am--include-marker
+include ./$(DEPDIR)/statcmd.Po # am--include-marker
+include ./$(DEPDIR)/trigcmd.Po # am--include-marker
+include ./$(DEPDIR)/trigproc.Po # am--include-marker
+include ./$(DEPDIR)/unpack.Po # am--include-marker
+include ./$(DEPDIR)/update.Po # am--include-marker
+include ./$(DEPDIR)/verify.Po # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	$(AM_V_CC)source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool clean-local \
+	mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/archives.Po
+	-rm -f ./$(DEPDIR)/cleanup.Po
+	-rm -f ./$(DEPDIR)/configure.Po
+	-rm -f ./$(DEPDIR)/depcon.Po
+	-rm -f ./$(DEPDIR)/divertcmd.Po
+	-rm -f ./$(DEPDIR)/enquiry.Po
+	-rm -f ./$(DEPDIR)/errors.Po
+	-rm -f ./$(DEPDIR)/file-match.Po
+	-rm -f ./$(DEPDIR)/filters.Po
+	-rm -f ./$(DEPDIR)/force.Po
+	-rm -f ./$(DEPDIR)/help.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/packages.Po
+	-rm -f ./$(DEPDIR)/perpkgstate.Po
+	-rm -f ./$(DEPDIR)/querycmd.Po
+	-rm -f ./$(DEPDIR)/remove.Po
+	-rm -f ./$(DEPDIR)/script.Po
+	-rm -f ./$(DEPDIR)/select.Po
+	-rm -f ./$(DEPDIR)/selinux.Po
+	-rm -f ./$(DEPDIR)/statcmd.Po
+	-rm -f ./$(DEPDIR)/trigcmd.Po
+	-rm -f ./$(DEPDIR)/trigproc.Po
+	-rm -f ./$(DEPDIR)/unpack.Po
+	-rm -f ./$(DEPDIR)/update.Po
+	-rm -f ./$(DEPDIR)/verify.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/archives.Po
+	-rm -f ./$(DEPDIR)/cleanup.Po
+	-rm -f ./$(DEPDIR)/configure.Po
+	-rm -f ./$(DEPDIR)/depcon.Po
+	-rm -f ./$(DEPDIR)/divertcmd.Po
+	-rm -f ./$(DEPDIR)/enquiry.Po
+	-rm -f ./$(DEPDIR)/errors.Po
+	-rm -f ./$(DEPDIR)/file-match.Po
+	-rm -f ./$(DEPDIR)/filters.Po
+	-rm -f ./$(DEPDIR)/force.Po
+	-rm -f ./$(DEPDIR)/help.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/packages.Po
+	-rm -f ./$(DEPDIR)/perpkgstate.Po
+	-rm -f ./$(DEPDIR)/querycmd.Po
+	-rm -f ./$(DEPDIR)/remove.Po
+	-rm -f ./$(DEPDIR)/script.Po
+	-rm -f ./$(DEPDIR)/select.Po
+	-rm -f ./$(DEPDIR)/selinux.Po
+	-rm -f ./$(DEPDIR)/statcmd.Po
+	-rm -f ./$(DEPDIR)/trigcmd.Po
+	-rm -f ./$(DEPDIR)/trigproc.Po
+	-rm -f ./$(DEPDIR)/unpack.Po
+	-rm -f ./$(DEPDIR)/update.Po
+	-rm -f ./$(DEPDIR)/verify.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am \
+	check-local clean clean-binPROGRAMS clean-generic \
+	clean-libtool clean-local cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+install-data-local:
+	$(MKDIR_P) $(DESTDIR)$(pkgconfdir)/dpkg.cfg.d
+	$(MKDIR_P) $(DESTDIR)$(admindir)/info
+	$(MKDIR_P) $(DESTDIR)$(admindir)/updates
+
+TEST_VERBOSE ?= 0
+TEST_PARALLEL ?= 1
+
+check-clean:
+	[ -z "$(test_tmpdir)" ] || rm -fr $(test_tmpdir)
+
+check-local: $(test_data) $(test_programs) $(test_scripts)
+	[ -z "$(test_tmpdir)" ] || $(MKDIR_P) $(test_tmpdir)
+	PATH="$(abs_top_builddir)/src:$(abs_top_builddir)/scripts:$(abs_top_builddir)/utils:$(PATH)" \
+	  LC_ALL=C \
+	  DPKG_COLORS=never \
+	  $(TEST_ENV_VARS) \
+	  srcdir=$(srcdir) builddir=$(builddir) \
+	  CC=$(CC) \
+	  PERL=$(PERL) \
+	  SHELL=$(SHELL) \
+	  PERL_DL_NONLAZY=1 \
+	  PERL5LIB=$(abs_top_srcdir)/scripts:$(abs_top_srcdir)/dselect/methods \
+	  PERL5OPT=$(TEST_COVERAGE) \
+	  $(PERL) -MTAP::Harness -e $(TEST_RUNNER) \
+	    $(addprefix $(builddir)/,$(test_programs)) \
+	    $(addprefix $(srcdir)/,$(test_scripts))
+
+clean-local: check-clean
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/src/Makefile.in dpkg-1.20.7.1/src/Makefile.in
--- dpkg-1.20.7.1-orig/src/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/src/Makefile.in	2021-06-09 18:23:00.987296544 -0500
@@ -0,0 +1,967 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Variables to be defined:
+#
+#  TEST_VERBOSE - set to 0 (default) or 1 to control test suite verbosity
+#  TEST_PARALLEL - set to 1 (default) or N to control the parallel jobs
+#  TEST_ENV_VARS - environment variables to be set for the test suite
+#  TEST_COVERAGE - set to the perl module in charge of getting test coverage
+#  test_tmpdir - test suite temporary directory
+#  test_scripts - list of test case scripts
+#  test_programs - list of test case programs
+#  test_data - list of test data files
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = dpkg$(EXEEXT) dpkg-divert$(EXEEXT) dpkg-query$(EXEEXT) \
+	dpkg-statoverride$(EXEEXT) dpkg-trigger$(EXEEXT)
+subdir = src
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_dpkg_OBJECTS = archives.$(OBJEXT) cleanup.$(OBJEXT) \
+	configure.$(OBJEXT) depcon.$(OBJEXT) enquiry.$(OBJEXT) \
+	errors.$(OBJEXT) file-match.$(OBJEXT) filters.$(OBJEXT) \
+	force.$(OBJEXT) help.$(OBJEXT) main.$(OBJEXT) \
+	packages.$(OBJEXT) perpkgstate.$(OBJEXT) remove.$(OBJEXT) \
+	script.$(OBJEXT) select.$(OBJEXT) selinux.$(OBJEXT) \
+	trigproc.$(OBJEXT) unpack.$(OBJEXT) update.$(OBJEXT) \
+	verify.$(OBJEXT)
+dpkg_OBJECTS = $(am_dpkg_OBJECTS)
+am__DEPENDENCIES_1 =
+am__DEPENDENCIES_2 = ../lib/dpkg/libdpkg.la $(am__DEPENDENCIES_1)
+dpkg_DEPENDENCIES = $(am__DEPENDENCIES_2) $(am__DEPENDENCIES_1)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+am_dpkg_divert_OBJECTS = divertcmd.$(OBJEXT)
+dpkg_divert_OBJECTS = $(am_dpkg_divert_OBJECTS)
+dpkg_divert_LDADD = $(LDADD)
+dpkg_divert_DEPENDENCIES = ../lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+am_dpkg_query_OBJECTS = querycmd.$(OBJEXT)
+dpkg_query_OBJECTS = $(am_dpkg_query_OBJECTS)
+dpkg_query_LDADD = $(LDADD)
+dpkg_query_DEPENDENCIES = ../lib/dpkg/libdpkg.la $(am__DEPENDENCIES_1)
+am_dpkg_statoverride_OBJECTS = force.$(OBJEXT) selinux.$(OBJEXT) \
+	statcmd.$(OBJEXT)
+dpkg_statoverride_OBJECTS = $(am_dpkg_statoverride_OBJECTS)
+dpkg_statoverride_DEPENDENCIES = $(am__DEPENDENCIES_2) \
+	$(am__DEPENDENCIES_1)
+am_dpkg_trigger_OBJECTS = trigcmd.$(OBJEXT)
+dpkg_trigger_OBJECTS = $(am_dpkg_trigger_OBJECTS)
+dpkg_trigger_LDADD = $(LDADD)
+dpkg_trigger_DEPENDENCIES = ../lib/dpkg/libdpkg.la \
+	$(am__DEPENDENCIES_1)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/archives.Po ./$(DEPDIR)/cleanup.Po \
+	./$(DEPDIR)/configure.Po ./$(DEPDIR)/depcon.Po \
+	./$(DEPDIR)/divertcmd.Po ./$(DEPDIR)/enquiry.Po \
+	./$(DEPDIR)/errors.Po ./$(DEPDIR)/file-match.Po \
+	./$(DEPDIR)/filters.Po ./$(DEPDIR)/force.Po \
+	./$(DEPDIR)/help.Po ./$(DEPDIR)/main.Po \
+	./$(DEPDIR)/packages.Po ./$(DEPDIR)/perpkgstate.Po \
+	./$(DEPDIR)/querycmd.Po ./$(DEPDIR)/remove.Po \
+	./$(DEPDIR)/script.Po ./$(DEPDIR)/select.Po \
+	./$(DEPDIR)/selinux.Po ./$(DEPDIR)/statcmd.Po \
+	./$(DEPDIR)/trigcmd.Po ./$(DEPDIR)/trigproc.Po \
+	./$(DEPDIR)/unpack.Po ./$(DEPDIR)/update.Po \
+	./$(DEPDIR)/verify.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(dpkg_SOURCES) $(dpkg_divert_SOURCES) $(dpkg_query_SOURCES) \
+	$(dpkg_statoverride_SOURCES) $(dpkg_trigger_SOURCES)
+DIST_SOURCES = $(dpkg_SOURCES) $(dpkg_divert_SOURCES) \
+	$(dpkg_query_SOURCES) $(dpkg_statoverride_SOURCES) \
+	$(dpkg_trigger_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp $(top_srcdir)/check.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = $(datadir)/locale
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = $(sysconfdir)/@PACKAGE@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CPPFLAGS = \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-DADMINDIR=\"$(admindir)\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+LDADD = \
+	../lib/dpkg/libdpkg.la \
+	$(LIBINTL)
+
+EXTRA_DIST = \
+	$(test_scripts) \
+	$(nil)
+
+dpkg_SOURCES = \
+	archives.c archives.h \
+	cleanup.c \
+	configure.c \
+	depcon.c \
+	enquiry.c \
+	errors.c \
+	file-match.c file-match.h \
+	filters.c filters.h \
+	force.c force.h \
+	help.c \
+	main.c main.h \
+	packages.c \
+	perpkgstate.c \
+	remove.c \
+	script.c \
+	select.c \
+	selinux.c \
+	trigproc.c \
+	unpack.c \
+	update.c \
+	verify.c \
+	$(nil)
+
+dpkg_LDADD = \
+	$(LDADD) \
+	$(SELINUX_LIBS)
+
+dpkg_divert_SOURCES = \
+	divertcmd.c
+
+dpkg_query_SOURCES = \
+	querycmd.c
+
+dpkg_statoverride_SOURCES = \
+	force.c force.h \
+	selinux.c \
+	statcmd.c
+
+dpkg_statoverride_LDADD = \
+	$(LDADD) \
+	$(SELINUX_LIBS)
+
+dpkg_trigger_SOURCES = \
+	trigcmd.c
+
+test_tmpdir = t.tmp
+test_scripts = \
+	t/dpkg_divert.t
+
+TEST_RUNNER = '\
+	my $$harness = TAP::Harness->new({ \
+	    exec => sub { my (undef, $$test) = @_; \
+	        return [ $$test ] if $$test !~ "\.t\$$" and -x $$test; \
+	        return }, \
+	    lib => [ "$(top_srcdir)/scripts", "$(top_srcdir)/dselect/methods"  ], \
+	    color => 1, \
+	    verbosity => $(TEST_VERBOSE), \
+	    jobs => $(TEST_PARALLEL), \
+	    failures => 1, \
+	}); \
+	my $$aggregate = $$harness->runtests(@ARGV); \
+	die "FAIL: test suite has errors\n" if $$aggregate->has_errors;'
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/check.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign src/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+$(top_srcdir)/check.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+dpkg$(EXEEXT): $(dpkg_OBJECTS) $(dpkg_DEPENDENCIES) $(EXTRA_dpkg_DEPENDENCIES) 
+	@rm -f dpkg$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_OBJECTS) $(dpkg_LDADD) $(LIBS)
+
+dpkg-divert$(EXEEXT): $(dpkg_divert_OBJECTS) $(dpkg_divert_DEPENDENCIES) $(EXTRA_dpkg_divert_DEPENDENCIES) 
+	@rm -f dpkg-divert$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_divert_OBJECTS) $(dpkg_divert_LDADD) $(LIBS)
+
+dpkg-query$(EXEEXT): $(dpkg_query_OBJECTS) $(dpkg_query_DEPENDENCIES) $(EXTRA_dpkg_query_DEPENDENCIES) 
+	@rm -f dpkg-query$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_query_OBJECTS) $(dpkg_query_LDADD) $(LIBS)
+
+dpkg-statoverride$(EXEEXT): $(dpkg_statoverride_OBJECTS) $(dpkg_statoverride_DEPENDENCIES) $(EXTRA_dpkg_statoverride_DEPENDENCIES) 
+	@rm -f dpkg-statoverride$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_statoverride_OBJECTS) $(dpkg_statoverride_LDADD) $(LIBS)
+
+dpkg-trigger$(EXEEXT): $(dpkg_trigger_OBJECTS) $(dpkg_trigger_DEPENDENCIES) $(EXTRA_dpkg_trigger_DEPENDENCIES) 
+	@rm -f dpkg-trigger$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(dpkg_trigger_OBJECTS) $(dpkg_trigger_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/archives.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cleanup.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/configure.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/depcon.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/divertcmd.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/enquiry.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/errors.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file-match.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filters.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/force.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/help.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/packages.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/perpkgstate.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/querycmd.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remove.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/script.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/select.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/selinux.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/statcmd.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trigcmd.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trigproc.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unpack.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/update.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/verify.Po@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool clean-local \
+	mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/archives.Po
+	-rm -f ./$(DEPDIR)/cleanup.Po
+	-rm -f ./$(DEPDIR)/configure.Po
+	-rm -f ./$(DEPDIR)/depcon.Po
+	-rm -f ./$(DEPDIR)/divertcmd.Po
+	-rm -f ./$(DEPDIR)/enquiry.Po
+	-rm -f ./$(DEPDIR)/errors.Po
+	-rm -f ./$(DEPDIR)/file-match.Po
+	-rm -f ./$(DEPDIR)/filters.Po
+	-rm -f ./$(DEPDIR)/force.Po
+	-rm -f ./$(DEPDIR)/help.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/packages.Po
+	-rm -f ./$(DEPDIR)/perpkgstate.Po
+	-rm -f ./$(DEPDIR)/querycmd.Po
+	-rm -f ./$(DEPDIR)/remove.Po
+	-rm -f ./$(DEPDIR)/script.Po
+	-rm -f ./$(DEPDIR)/select.Po
+	-rm -f ./$(DEPDIR)/selinux.Po
+	-rm -f ./$(DEPDIR)/statcmd.Po
+	-rm -f ./$(DEPDIR)/trigcmd.Po
+	-rm -f ./$(DEPDIR)/trigproc.Po
+	-rm -f ./$(DEPDIR)/unpack.Po
+	-rm -f ./$(DEPDIR)/update.Po
+	-rm -f ./$(DEPDIR)/verify.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/archives.Po
+	-rm -f ./$(DEPDIR)/cleanup.Po
+	-rm -f ./$(DEPDIR)/configure.Po
+	-rm -f ./$(DEPDIR)/depcon.Po
+	-rm -f ./$(DEPDIR)/divertcmd.Po
+	-rm -f ./$(DEPDIR)/enquiry.Po
+	-rm -f ./$(DEPDIR)/errors.Po
+	-rm -f ./$(DEPDIR)/file-match.Po
+	-rm -f ./$(DEPDIR)/filters.Po
+	-rm -f ./$(DEPDIR)/force.Po
+	-rm -f ./$(DEPDIR)/help.Po
+	-rm -f ./$(DEPDIR)/main.Po
+	-rm -f ./$(DEPDIR)/packages.Po
+	-rm -f ./$(DEPDIR)/perpkgstate.Po
+	-rm -f ./$(DEPDIR)/querycmd.Po
+	-rm -f ./$(DEPDIR)/remove.Po
+	-rm -f ./$(DEPDIR)/script.Po
+	-rm -f ./$(DEPDIR)/select.Po
+	-rm -f ./$(DEPDIR)/selinux.Po
+	-rm -f ./$(DEPDIR)/statcmd.Po
+	-rm -f ./$(DEPDIR)/trigcmd.Po
+	-rm -f ./$(DEPDIR)/trigproc.Po
+	-rm -f ./$(DEPDIR)/unpack.Po
+	-rm -f ./$(DEPDIR)/update.Po
+	-rm -f ./$(DEPDIR)/verify.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am \
+	check-local clean clean-binPROGRAMS clean-generic \
+	clean-libtool clean-local cscopelist-am ctags ctags-am \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	pdf pdf-am ps ps-am tags tags-am uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+install-data-local:
+	$(MKDIR_P) $(DESTDIR)$(pkgconfdir)/dpkg.cfg.d
+	$(MKDIR_P) $(DESTDIR)$(admindir)/info
+	$(MKDIR_P) $(DESTDIR)$(admindir)/updates
+
+TEST_VERBOSE ?= 0
+TEST_PARALLEL ?= 1
+
+check-clean:
+	[ -z "$(test_tmpdir)" ] || rm -fr $(test_tmpdir)
+
+check-local: $(test_data) $(test_programs) $(test_scripts)
+	[ -z "$(test_tmpdir)" ] || $(MKDIR_P) $(test_tmpdir)
+	PATH="$(abs_top_builddir)/src:$(abs_top_builddir)/scripts:$(abs_top_builddir)/utils:$(PATH)" \
+	  LC_ALL=C \
+	  DPKG_COLORS=never \
+	  $(TEST_ENV_VARS) \
+	  srcdir=$(srcdir) builddir=$(builddir) \
+	  CC=$(CC) \
+	  PERL=$(PERL) \
+	  SHELL=$(SHELL) \
+	  PERL_DL_NONLAZY=1 \
+	  PERL5LIB=$(abs_top_srcdir)/scripts:$(abs_top_srcdir)/dselect/methods \
+	  PERL5OPT=$(TEST_COVERAGE) \
+	  $(PERL) -MTAP::Harness -e $(TEST_RUNNER) \
+	    $(addprefix $(builddir)/,$(test_programs)) \
+	    $(addprefix $(srcdir)/,$(test_scripts))
+
+clean-local: check-clean
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/stamp-h1 dpkg-1.20.7.1/stamp-h1
--- dpkg-1.20.7.1-orig/stamp-h1	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/stamp-h1	2021-06-09 18:24:52.021468422 -0500
@@ -0,0 +1 @@
+timestamp for config.h
diff -Naurp dpkg-1.20.7.1-orig/t-func/atconfig dpkg-1.20.7.1/t-func/atconfig
--- dpkg-1.20.7.1-orig/t-func/atconfig	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/t-func/atconfig	2021-06-09 18:24:52.133468594 -0500
@@ -0,0 +1,20 @@
+# Configurable variable values for building test suites.
+# Generated by ./config.status.
+# Copyright (C) 2012 Free Software Foundation, Inc.
+
+# The test suite will define top_srcdir=/../.. etc.
+at_testdir='t-func'
+abs_builddir='/media/lfs/sources/dpkg-1.20.7.1/t-func'
+at_srcdir='.'
+abs_srcdir='/media/lfs/sources/dpkg-1.20.7.1/t-func'
+at_top_srcdir='..'
+abs_top_srcdir='/media/lfs/sources/dpkg-1.20.7.1'
+at_top_build_prefix='../'
+abs_top_builddir='/media/lfs/sources/dpkg-1.20.7.1'
+
+# Backward compatibility with Autotest <= 2.59b:
+at_top_builddir=$at_top_build_prefix
+
+AUTOTEST_PATH='t-func'
+
+SHELL=${CONFIG_SHELL-'/bin/sh'}
diff -Naurp dpkg-1.20.7.1-orig/t-func/atlocal dpkg-1.20.7.1/t-func/atlocal
--- dpkg-1.20.7.1-orig/t-func/atlocal	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/t-func/atlocal	2021-06-09 18:24:51.837468142 -0500
@@ -0,0 +1,27 @@
+# Global shell definitions for the autotest test suite
+
+PATH="/media/lfs/sources/dpkg-1.20.7.1/dpkg-deb:/media/lfs/sources/dpkg-1.20.7.1/dpkg-split:/media/lfs/sources/dpkg-1.20.7.1/src:/media/lfs/sources/dpkg-1.20.7.1/utils:$PATH"
+export PATH
+
+TESTDATA="/media/lfs/sources/dpkg-1.20.7.1/t-func"
+export TESTDATA
+
+# Setup a sane environment
+
+umask 0022
+
+LC_ALL=C
+export LC_ALL
+
+TZ=UTC0
+export TZ
+
+SOURCE_DATE_EPOCH=0
+export SOURCE_DATE_EPOCH
+
+# Cleanup variables that might affect the tests.
+unset GZIP
+unset BZIP
+unset XZ_OPT
+unset XZ_DEFAULTS
+
diff -Naurp dpkg-1.20.7.1-orig/t-func/Makefile dpkg-1.20.7.1/t-func/Makefile
--- dpkg-1.20.7.1-orig/t-func/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/t-func/Makefile	2021-06-09 18:24:51.829468130 -0500
@@ -0,0 +1,549 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# t-func/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+subdir = t-func
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = atlocal
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/atlocal.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/t-func
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/t-func
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = ${datarootdir}/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+EXTRA_DIST = $(srcdir)/package.m4 $(TESTSUITE_AT) $(TESTSUITE)
+TESTSUITE_AT = $(srcdir)/testsuite.at $(srcdir)/local.at \
+	$(srcdir)/deb-format.at $(srcdir)/deb-fields.at \
+	$(srcdir)/deb-content.at $(srcdir)/deb-split.at
+TESTSUITE = $(srcdir)/testsuite
+DISTCLEANFILES = atconfig
+AUTOTEST = $(AUTOM4TE) --language=autotest
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign t-func/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign t-func/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+atlocal: $(top_builddir)/config.status $(srcdir)/atlocal.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am: installcheck-local
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: all all-am check check-am check-local clean clean-generic \
+	clean-libtool clean-local cscopelist-am ctags-am distclean \
+	distclean-generic distclean-libtool distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installcheck-local installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# The ":;" works around a Bash 3.2 bug when the output is not writable.
+$(srcdir)/package.m4: $(top_srcdir)/configure.ac
+	:;{ \
+	  echo '# Signature of the current package.' && \
+	  echo 'm4_define([AT_PACKAGE_NAME], [$(PACKAGE_NAME)])' && \
+	  echo 'm4_define([AT_PACKAGE_TARNAME], [$(PACKAGE_TARNAME)])' && \
+	  echo 'm4_define([AT_PACKAGE_VERSION], [$(PACKAGE_VERSION)])' && \
+	  echo 'm4_define([AT_PACKAGE_STRING], [$(PACKAGE_STRING)])' && \
+	  echo 'm4_define([AT_PACKAGE_URL], [$(PACKAGE_URL)])' && \
+	  echo 'm4_define([AT_PACKAGE_BUGREPORT], [$(PACKAGE_BUGREPORT)])'; \
+	} >'$(srcdir)/package.m4'
+
+check-local: atconfig atlocal $(TESTSUITE)
+	$(SHELL) '$(TESTSUITE)' $(TESTSUITEFLAGS)
+
+installcheck-local: atconfig atlocal $(TESTSUITE)
+	$(SHELL) '$(TESTSUITE)' AUTOTEST_PATH='$(bindir)' $(TESTSUITEFLAGS)
+
+clean-local:
+	test ! -f '$(TESTSUITE)' || $(SHELL) '$(TESTSUITE)' --clean
+$(TESTSUITE): $(srcdir)/package.m4 $(TESTSUITE_AT)
+	$(AUTOTEST) -I '$(srcdir)' -o $@.tmp $@.at
+	mv $@.tmp $@
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/t-func/Makefile.in dpkg-1.20.7.1/t-func/Makefile.in
--- dpkg-1.20.7.1-orig/t-func/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/t-func/Makefile.in	2021-06-09 18:23:01.007296575 -0500
@@ -0,0 +1,549 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = t-func
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = atlocal
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/atlocal.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+EXTRA_DIST = $(srcdir)/package.m4 $(TESTSUITE_AT) $(TESTSUITE)
+TESTSUITE_AT = $(srcdir)/testsuite.at $(srcdir)/local.at \
+	$(srcdir)/deb-format.at $(srcdir)/deb-fields.at \
+	$(srcdir)/deb-content.at $(srcdir)/deb-split.at
+TESTSUITE = $(srcdir)/testsuite
+DISTCLEANFILES = atconfig
+AUTOTEST = $(AUTOM4TE) --language=autotest
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign t-func/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign t-func/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+atlocal: $(top_builddir)/config.status $(srcdir)/atlocal.in
+	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-local mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am: installcheck-local
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: all all-am check check-am check-local clean clean-generic \
+	clean-libtool clean-local cscopelist-am ctags-am distclean \
+	distclean-generic distclean-libtool distdir dvi dvi-am html \
+	html-am info info-am install install-am install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installcheck-local installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am
+
+.PRECIOUS: Makefile
+
+
+# The ":;" works around a Bash 3.2 bug when the output is not writable.
+$(srcdir)/package.m4: $(top_srcdir)/configure.ac
+	:;{ \
+	  echo '# Signature of the current package.' && \
+	  echo 'm4_define([AT_PACKAGE_NAME], [$(PACKAGE_NAME)])' && \
+	  echo 'm4_define([AT_PACKAGE_TARNAME], [$(PACKAGE_TARNAME)])' && \
+	  echo 'm4_define([AT_PACKAGE_VERSION], [$(PACKAGE_VERSION)])' && \
+	  echo 'm4_define([AT_PACKAGE_STRING], [$(PACKAGE_STRING)])' && \
+	  echo 'm4_define([AT_PACKAGE_URL], [$(PACKAGE_URL)])' && \
+	  echo 'm4_define([AT_PACKAGE_BUGREPORT], [$(PACKAGE_BUGREPORT)])'; \
+	} >'$(srcdir)/package.m4'
+
+check-local: atconfig atlocal $(TESTSUITE)
+	$(SHELL) '$(TESTSUITE)' $(TESTSUITEFLAGS)
+
+installcheck-local: atconfig atlocal $(TESTSUITE)
+	$(SHELL) '$(TESTSUITE)' AUTOTEST_PATH='$(bindir)' $(TESTSUITEFLAGS)
+
+clean-local:
+	test ! -f '$(TESTSUITE)' || $(SHELL) '$(TESTSUITE)' --clean
+$(TESTSUITE): $(srcdir)/package.m4 $(TESTSUITE_AT)
+	$(AUTOTEST) -I '$(srcdir)' -o $@.tmp $@.at
+	mv $@.tmp $@
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/utils/.deps/start-stop-daemon.Po dpkg-1.20.7.1/utils/.deps/start-stop-daemon.Po
--- dpkg-1.20.7.1-orig/utils/.deps/start-stop-daemon.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/utils/.deps/start-stop-daemon.Po	2021-06-09 18:23:51.721375929 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/utils/.deps/update_alternatives-update-alternatives.Po dpkg-1.20.7.1/utils/.deps/update_alternatives-update-alternatives.Po
--- dpkg-1.20.7.1-orig/utils/.deps/update_alternatives-update-alternatives.Po	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/utils/.deps/update_alternatives-update-alternatives.Po	2021-06-09 18:23:51.722375931 -0500
@@ -0,0 +1 @@
+# dummy
diff -Naurp dpkg-1.20.7.1-orig/utils/Makefile dpkg-1.20.7.1/utils/Makefile
--- dpkg-1.20.7.1-orig/utils/Makefile	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/utils/Makefile	2021-06-09 18:24:52.015468414 -0500
@@ -0,0 +1,978 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# utils/Makefile.  Generated from Makefile.in by configure.
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+
+# Variables to be defined:
+#
+#  TEST_VERBOSE - set to 0 (default) or 1 to control test suite verbosity
+#  TEST_PARALLEL - set to 1 (default) or N to control the parallel jobs
+#  TEST_ENV_VARS - environment variables to be set for the test suite
+#  TEST_COVERAGE - set to the perl module in charge of getting test coverage
+#  test_tmpdir - test suite temporary directory
+#  test_scripts - list of test case scripts
+#  test_programs - list of test case programs
+#  test_data - list of test data files
+
+
+
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/dpkg
+pkgincludedir = $(includedir)/dpkg
+pkglibdir = $(libdir)/dpkg
+pkglibexecdir = $(libexecdir)/dpkg
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = x86_64-pc-linux-gnu
+host_triplet = x86_64-pc-linux-gnu
+bin_PROGRAMS = $(am__EXEEXT_1)
+#am__append_1 = org.dpkg.pkexec.update-alternatives.policy
+#am__append_2 = update-alternatives
+sbin_PROGRAMS = $(am__EXEEXT_2)
+#am__append_3 = start-stop-daemon
+subdir = utils
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+#am__EXEEXT_1 =  \
+#	update-alternatives$(EXEEXT)
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" \
+	"$(DESTDIR)$(pkexecdir)"
+#am__EXEEXT_2 =  \
+#	start-stop-daemon$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS) $(sbin_PROGRAMS)
+am__start_stop_daemon_SOURCES_DIST = start-stop-daemon.c
+#am_start_stop_daemon_OBJECTS =  \
+#	start-stop-daemon.$(OBJEXT)
+start_stop_daemon_OBJECTS = $(am_start_stop_daemon_OBJECTS)
+am__DEPENDENCIES_1 =
+#start_stop_daemon_DEPENDENCIES =  \
+#	../lib/compat/libcompat.la \
+#	$(am__DEPENDENCIES_1) \
+#	$(am__DEPENDENCIES_1)
+AM_V_lt = $(am__v_lt_$(V))
+am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY))
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+am_update_alternatives_OBJECTS =  \
+	update_alternatives-update-alternatives.$(OBJEXT)
+update_alternatives_OBJECTS = $(am_update_alternatives_OBJECTS)
+update_alternatives_DEPENDENCIES = ../lib/compat/libcompat.la \
+	$(am__DEPENDENCIES_1)
+AM_V_P = $(am__v_P_$(V))
+am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_$(V))
+am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_$(V))
+am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/start-stop-daemon.Po \
+	./$(DEPDIR)/update_alternatives-update-alternatives.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_$(V))
+am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY))
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_$(V))
+am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY))
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(start_stop_daemon_SOURCES) $(update_alternatives_SOURCES)
+DIST_SOURCES = $(am__start_stop_daemon_SOURCES_DIST) \
+	$(update_alternatives_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+DATA = $(pkexec_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp $(top_srcdir)/check.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing aclocal-1.16
+AMTAR = $${TAR-tar}
+AM_DEFAULT_VERBOSITY = 0
+AR = ar
+AUTOCONF = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoconf
+AUTOHEADER = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autoheader
+AUTOM4TE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing autom4te
+AUTOMAKE = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing automake-1.16
+AWK = gawk
+BUILD_DEVEL_DOCS = NO
+BZ2_LIBS = -lbz2
+CC = gcc
+CCDEPMODE = depmode=gcc3
+CFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wbad-function-cast -Wc99-c11-compat -Wdeclaration-after-statement -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -g -O2
+CPP = gcc -E
+CPPFLAGS = 
+CURSES_LIBS = 
+CXX = g++
+CXXCPP = g++ -E
+CXXDEPMODE = depmode=gcc3
+CXXFLAGS =  -Wall -Wextra -Wcast-align -Wduplicated-branches -Wduplicated-cond -Wformat -Wformat-security -Wformat=2 -Winit-self -Wlogical-not-parentheses -Wlogical-op -Wmissing-declarations -Wmissing-format-attribute -Wno-missing-field-initializers -Wno-nonnull-compare -Wno-unused-parameter -Wnull-dereference -Wpointer-arith -Wredundant-decls -Wregister -Wrestrict -Wshadow -Wshift-negative-value -Wsizeof-array-argument -Wswitch-bool -Wvla -Wwrite-strings -Wc++11-compat -Wcast-qual -Wold-style-cast -Wzero-as-null-pointer-constant -g -O2
+CYGPATH_W = echo
+DEFS = -DHAVE_CONFIG_H
+DEPDIR = .deps
+DLLTOOL = false
+DOXYGEN = 
+DSYMUTIL = 
+DUMPBIN = 
+ECHO_C = 
+ECHO_N = -n
+ECHO_T = 
+EGREP = /bin/grep -E
+EXEEXT = 
+FGREP = /bin/grep -F
+GCOV = 
+GETTEXT_MACRO_VERSION = 0.20
+GMSGFMT = /usr/bin/msgfmt
+GMSGFMT_015 = /usr/bin/msgfmt
+GREP = /bin/grep
+HAVE_DOT = YES
+INSTALL = /usr/bin/install -c
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
+INTLLIBS = 
+INTL_MACOSX_LIBS = 
+KVM_LIBS = 
+LCOV = 
+LCOV_GENHTML = 
+LD = /usr/bin/ld -m elf_x86_64
+LDFLAGS =  -Wl,-O1
+LIBICONV = -liconv
+LIBINTL = 
+LIBOBJS = 
+LIBS = 
+LIBTOOL = $(SHELL) $(top_builddir)/libtool
+LIPO = 
+LN_S = ln -s
+LTLIBICONV = -liconv
+LTLIBINTL = 
+LTLIBOBJS = 
+LT_SYS_LIBRARY_PATH = 
+LZMA_LIBS = -llzma
+MAKEINFO = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/missing makeinfo
+MANIFEST_TOOL = :
+MD_LIBS = 
+MKDIR_P = /bin/mkdir -p
+MSGFMT = /usr/bin/msgfmt
+MSGMERGE = /usr/bin/msgmerge
+MSGMERGE_FOR_MSGFMT_OPTION = --for-msgfmt
+NM = /usr/bin/nm -B
+NMEDIT = 
+OBJDUMP = objdump
+OBJEXT = o
+OTOOL = 
+OTOOL64 = 
+PACKAGE = dpkg
+PACKAGE_BUGREPORT = debian-dpkg@lists.debian.org
+PACKAGE_BUG_WEB = https://bugs.debian.org/src:dpkg
+PACKAGE_COPYRIGHT_HOLDER = Dpkg Developers
+PACKAGE_CPAN_NAME = Dpkg
+PACKAGE_DIST_IS_RELEASE = 1
+PACKAGE_NAME = dpkg
+PACKAGE_RELEASE_DATE = 2021-01-09
+PACKAGE_STRING = dpkg 1.20.7.1
+PACKAGE_TARNAME = dpkg
+PACKAGE_URL = https://wiki.debian.org/Teams/Dpkg
+PACKAGE_VCS_TYPE = git
+PACKAGE_VCS_URL = https://git.dpkg.org/git/dpkg/dpkg.git
+PACKAGE_VCS_WEB = https://git.dpkg.org/cgit/dpkg/dpkg.git
+PACKAGE_VERSION = 1.20.7.1
+PATCH = patch
+PATH_SEPARATOR = :
+PERL = /usr/bin/perl
+PERL_COVER = 
+PERL_COVERAGE = 
+PERL_LIBDIR = $(prefix)/lib/perl5/vendor_perl/5.28.2
+PERL_MIN_VERSION = 5.24.1
+PKG_CONFIG = /usr/bin/pkg-config
+PKG_CONFIG_LIBDIR = 
+PKG_CONFIG_PATH = 
+PO4A = no
+POD2MAN = pod2man
+POSUB = po
+PS_LIBS = 
+RANLIB = ranlib
+SED = /bin/sed
+SELINUX_CFLAGS = 
+SELINUX_LIBS = 
+SET_MAKE = 
+SHELL = /bin/sh
+STRIP = strip
+TAR = tar
+USE_NLS = yes
+USE_PO4A = no
+USE_UNICODE = yes
+VERSION = 1.20.7.1
+XGETTEXT = /usr/bin/xgettext
+XGETTEXT_015 = /usr/bin/xgettext
+XGETTEXT_EXTRA_OPTIONS = 
+Z_LIBS = -lz
+abs_builddir = /media/lfs/sources/dpkg-1.20.7.1/utils
+abs_srcdir = /media/lfs/sources/dpkg-1.20.7.1/utils
+abs_top_builddir = /media/lfs/sources/dpkg-1.20.7.1
+abs_top_srcdir = /media/lfs/sources/dpkg-1.20.7.1
+ac_ct_AR = ar
+ac_ct_CC = gcc
+ac_ct_CXX = g++
+ac_ct_DUMPBIN = 
+admindir = ${prefix}/var/lib/dpkg
+am__include = include
+am__leading_dot = .
+am__quote = 
+am__tar = tar --format=ustar -chf - "$$tardir"
+am__untar = tar -xf -
+bindir = ${exec_prefix}/bin
+build = x86_64-pc-linux-gnu
+build_alias = 
+build_cpu = x86_64
+build_os = linux-gnu
+build_vendor = pc
+builddir = .
+datadir = ${datarootdir}
+datarootdir = ${prefix}/share
+devlibdir = ${exec_prefix}/lib
+docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
+dvidir = ${docdir}
+exec_prefix = ${prefix}
+host = x86_64-pc-linux-gnu
+host_alias = 
+host_cpu = x86_64
+host_os = linux-gnu
+host_vendor = pc
+htmldir = ${docdir}
+includedir = ${prefix}/include
+infodir = ${datarootdir}/info
+install_sh = ${SHELL} /media/lfs/sources/dpkg-1.20.7.1/build-aux/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localedir = $(datadir)/locale
+localstatedir = ${prefix}/var
+logdir = ${prefix}/var/log
+mandir = ${datarootdir}/man
+mkdir_p = $(MKDIR_P)
+oldincludedir = /usr/include
+pdfdir = ${docdir}
+pkgconfdir = /etc/dpkg
+prefix = /usr
+program_transform_name = s,x,x,
+psdir = ${docdir}
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+srcdir = .
+sysconfdir = /etc
+target_alias = 
+top_build_prefix = ../
+top_builddir = ..
+top_srcdir = ..
+AM_CPPFLAGS = \
+	-DADMINDIR=\"$(admindir)\" \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-DLOGDIR=\"$(logdir)\" \
+	-DSYSCONFDIR=\"$(sysconfdir)\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+CLEANFILES = \
+	org.dpkg.pkexec.update-alternatives.policy \
+	$(nil)
+
+EXTRA_DIST = \
+	README.alternatives \
+	update-alternatives.polkit.in \
+	$(test_scripts) \
+	$(nil)
+
+pkexecdir = $(datadir)/polkit-1/actions
+pkexec_DATA = $(am__append_1)
+do_polkit_subst = $(SED) \
+	-e 's,[@]bindir[@],$(bindir),g' \
+	$(nil)
+
+update_alternatives_SOURCES = \
+	update-alternatives.c
+
+update_alternatives_CPPFLAGS = \
+	-DALT_TMP_EXT=\".dpkg-tmp\" \
+	-DADMINDIR_ENVVAR=\"DPKG_ADMINDIR\" \
+	-DINSTDIR_ENVVAR=\"DPKG_ROOT\" \
+	$(AM_CPPFLAGS)
+
+update_alternatives_LDADD = \
+	../lib/compat/libcompat.la \
+	$(LIBINTL) \
+	$(nil)
+
+#start_stop_daemon_SOURCES = \
+#	start-stop-daemon.c
+
+#start_stop_daemon_LDADD = \
+#	../lib/compat/libcompat.la \
+#	$(PS_LIBS) \
+#	$(KVM_LIBS) \
+#	$(nil)
+
+TEST_ENV_VARS = DPKG_DATADIR=$(top_srcdir)/data
+test_tmpdir = t.tmp
+test_scripts = \
+	t/update_alternatives.t
+
+TEST_RUNNER = '\
+	my $$harness = TAP::Harness->new({ \
+	    exec => sub { my (undef, $$test) = @_; \
+	        return [ $$test ] if $$test !~ "\.t\$$" and -x $$test; \
+	        return }, \
+	    lib => [ "$(top_srcdir)/scripts", "$(top_srcdir)/dselect/methods"  ], \
+	    color => 1, \
+	    verbosity => $(TEST_VERBOSE), \
+	    jobs => $(TEST_PARALLEL), \
+	    failures => 1, \
+	}); \
+	my $$aggregate = $$harness->runtests(@ARGV); \
+	die "FAIL: test suite has errors\n" if $$aggregate->has_errors;'
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/check.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign utils/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign utils/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+$(top_srcdir)/check.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-sbinPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+	@list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+start-stop-daemon$(EXEEXT): $(start_stop_daemon_OBJECTS) $(start_stop_daemon_DEPENDENCIES) $(EXTRA_start_stop_daemon_DEPENDENCIES) 
+	@rm -f start-stop-daemon$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(start_stop_daemon_OBJECTS) $(start_stop_daemon_LDADD) $(LIBS)
+
+update-alternatives$(EXEEXT): $(update_alternatives_OBJECTS) $(update_alternatives_DEPENDENCIES) $(EXTRA_update_alternatives_DEPENDENCIES) 
+	@rm -f update-alternatives$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(update_alternatives_OBJECTS) $(update_alternatives_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+include ./$(DEPDIR)/start-stop-daemon.Po # am--include-marker
+include ./$(DEPDIR)/update_alternatives-update-alternatives.Po # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+#	$(AM_V_CC)source='$<' object='$@' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+#	$(AM_V_CC)source='$<' object='$@' libtool=yes \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(LTCOMPILE) -c -o $@ $<
+
+update_alternatives-update-alternatives.o: update-alternatives.c
+	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(update_alternatives_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT update_alternatives-update-alternatives.o -MD -MP -MF $(DEPDIR)/update_alternatives-update-alternatives.Tpo -c -o update_alternatives-update-alternatives.o `test -f 'update-alternatives.c' || echo '$(srcdir)/'`update-alternatives.c
+	$(AM_V_at)$(am__mv) $(DEPDIR)/update_alternatives-update-alternatives.Tpo $(DEPDIR)/update_alternatives-update-alternatives.Po
+#	$(AM_V_CC)source='update-alternatives.c' object='update_alternatives-update-alternatives.o' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(update_alternatives_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o update_alternatives-update-alternatives.o `test -f 'update-alternatives.c' || echo '$(srcdir)/'`update-alternatives.c
+
+update_alternatives-update-alternatives.obj: update-alternatives.c
+	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(update_alternatives_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT update_alternatives-update-alternatives.obj -MD -MP -MF $(DEPDIR)/update_alternatives-update-alternatives.Tpo -c -o update_alternatives-update-alternatives.obj `if test -f 'update-alternatives.c'; then $(CYGPATH_W) 'update-alternatives.c'; else $(CYGPATH_W) '$(srcdir)/update-alternatives.c'; fi`
+	$(AM_V_at)$(am__mv) $(DEPDIR)/update_alternatives-update-alternatives.Tpo $(DEPDIR)/update_alternatives-update-alternatives.Po
+#	$(AM_V_CC)source='update-alternatives.c' object='update_alternatives-update-alternatives.obj' libtool=no \
+#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
+#	$(AM_V_CC_no)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(update_alternatives_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o update_alternatives-update-alternatives.obj `if test -f 'update-alternatives.c'; then $(CYGPATH_W) 'update-alternatives.c'; else $(CYGPATH_W) '$(srcdir)/update-alternatives.c'; fi`
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-pkexecDATA: $(pkexec_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(pkexec_DATA)'; test -n "$(pkexecdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkexecdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkexecdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkexecdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkexecdir)" || exit $$?; \
+	done
+
+uninstall-pkexecDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkexec_DATA)'; test -n "$(pkexecdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkexecdir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-am
+all-am: Makefile $(PROGRAMS) $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(pkexecdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool clean-local \
+	clean-sbinPROGRAMS mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/start-stop-daemon.Po
+	-rm -f ./$(DEPDIR)/update_alternatives-update-alternatives.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-pkexecDATA \
+	install-sbinPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/start-stop-daemon.Po
+	-rm -f ./$(DEPDIR)/update_alternatives-update-alternatives.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-local \
+	uninstall-pkexecDATA uninstall-sbinPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am \
+	check-local clean clean-binPROGRAMS clean-generic \
+	clean-libtool clean-local clean-sbinPROGRAMS cscopelist-am \
+	ctags ctags-am distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkexecDATA install-ps \
+	install-ps-am install-sbinPROGRAMS install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
+	uninstall-local uninstall-pkexecDATA uninstall-sbinPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+org.dpkg.pkexec.update-alternatives.policy: update-alternatives.polkit.in Makefile
+	@test -d `dirname $@` || $(MKDIR_P) `dirname $@`
+	$(AM_V_GEN) GETTEXTDATADIR="$(top_srcdir)/po" \
+	  $(MSGFMT) --xml --template $< -d $(top_srcdir)/po -o - \
+	  | $(do_polkit_subst) >$@
+
+install-data-local:
+#	$(MKDIR_P) $(DESTDIR)$(sysconfdir)/alternatives
+#	$(MKDIR_P) $(DESTDIR)$(admindir)/alternatives
+#	$(INSTALL_DATA) $(srcdir)/README.alternatives $(DESTDIR)$(sysconfdir)/alternatives/README
+
+uninstall-local:
+	rm -f $(DESTDIR)$(sysconfdir)/alternatives/README
+
+TEST_VERBOSE ?= 0
+TEST_PARALLEL ?= 1
+
+check-clean:
+	[ -z "$(test_tmpdir)" ] || rm -fr $(test_tmpdir)
+
+check-local: $(test_data) $(test_programs) $(test_scripts)
+	[ -z "$(test_tmpdir)" ] || $(MKDIR_P) $(test_tmpdir)
+	PATH="$(abs_top_builddir)/src:$(abs_top_builddir)/scripts:$(abs_top_builddir)/utils:$(PATH)" \
+	  LC_ALL=C \
+	  DPKG_COLORS=never \
+	  $(TEST_ENV_VARS) \
+	  srcdir=$(srcdir) builddir=$(builddir) \
+	  CC=$(CC) \
+	  PERL=$(PERL) \
+	  SHELL=$(SHELL) \
+	  PERL_DL_NONLAZY=1 \
+	  PERL5LIB=$(abs_top_srcdir)/scripts:$(abs_top_srcdir)/dselect/methods \
+	  PERL5OPT=$(TEST_COVERAGE) \
+	  $(PERL) -MTAP::Harness -e $(TEST_RUNNER) \
+	    $(addprefix $(builddir)/,$(test_programs)) \
+	    $(addprefix $(srcdir)/,$(test_scripts))
+
+clean-local: check-clean
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -Naurp dpkg-1.20.7.1-orig/utils/Makefile.in dpkg-1.20.7.1/utils/Makefile.in
--- dpkg-1.20.7.1-orig/utils/Makefile.in	1969-12-31 18:00:00.000000000 -0600
+++ dpkg-1.20.7.1/utils/Makefile.in	2021-06-09 18:23:01.042296630 -0500
@@ -0,0 +1,978 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Variables to be defined:
+#
+#  TEST_VERBOSE - set to 0 (default) or 1 to control test suite verbosity
+#  TEST_PARALLEL - set to 1 (default) or N to control the parallel jobs
+#  TEST_ENV_VARS - environment variables to be set for the test suite
+#  TEST_COVERAGE - set to the perl module in charge of getting test coverage
+#  test_tmpdir - test suite temporary directory
+#  test_scripts - list of test case scripts
+#  test_programs - list of test case programs
+#  test_data - list of test data files
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = $(am__EXEEXT_1)
+@BUILD_UPDATE_ALTERNATIVES_TRUE@am__append_1 = org.dpkg.pkexec.update-alternatives.policy
+@BUILD_UPDATE_ALTERNATIVES_TRUE@am__append_2 = update-alternatives
+sbin_PROGRAMS = $(am__EXEEXT_2)
+@BUILD_START_STOP_DAEMON_TRUE@am__append_3 = start-stop-daemon
+subdir = utils
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/dpkg-arch.m4 \
+	$(top_srcdir)/m4/dpkg-build.m4 \
+	$(top_srcdir)/m4/dpkg-compiler.m4 \
+	$(top_srcdir)/m4/dpkg-coverage.m4 \
+	$(top_srcdir)/m4/dpkg-funcs.m4 $(top_srcdir)/m4/dpkg-libs.m4 \
+	$(top_srcdir)/m4/dpkg-linker.m4 $(top_srcdir)/m4/dpkg-progs.m4 \
+	$(top_srcdir)/m4/dpkg-types.m4 \
+	$(top_srcdir)/m4/dpkg-unicode.m4 $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/host-cpu-c-abi.m4 $(top_srcdir)/m4/iconv.m4 \
+	$(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \
+	$(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \
+	$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+@BUILD_UPDATE_ALTERNATIVES_TRUE@am__EXEEXT_1 =  \
+@BUILD_UPDATE_ALTERNATIVES_TRUE@	update-alternatives$(EXEEXT)
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" \
+	"$(DESTDIR)$(pkexecdir)"
+@BUILD_START_STOP_DAEMON_TRUE@am__EXEEXT_2 =  \
+@BUILD_START_STOP_DAEMON_TRUE@	start-stop-daemon$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS) $(sbin_PROGRAMS)
+am__start_stop_daemon_SOURCES_DIST = start-stop-daemon.c
+@BUILD_START_STOP_DAEMON_TRUE@am_start_stop_daemon_OBJECTS =  \
+@BUILD_START_STOP_DAEMON_TRUE@	start-stop-daemon.$(OBJEXT)
+start_stop_daemon_OBJECTS = $(am_start_stop_daemon_OBJECTS)
+am__DEPENDENCIES_1 =
+@BUILD_START_STOP_DAEMON_TRUE@start_stop_daemon_DEPENDENCIES =  \
+@BUILD_START_STOP_DAEMON_TRUE@	../lib/compat/libcompat.la \
+@BUILD_START_STOP_DAEMON_TRUE@	$(am__DEPENDENCIES_1) \
+@BUILD_START_STOP_DAEMON_TRUE@	$(am__DEPENDENCIES_1)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 = 
+am_update_alternatives_OBJECTS =  \
+	update_alternatives-update-alternatives.$(OBJEXT)
+update_alternatives_OBJECTS = $(am_update_alternatives_OBJECTS)
+update_alternatives_DEPENDENCIES = ../lib/compat/libcompat.la \
+	$(am__DEPENDENCIES_1)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+DEFAULT_INCLUDES = 
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/start-stop-daemon.Po \
+	./$(DEPDIR)/update_alternatives-update-alternatives.Po
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+	$(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo "  CC      " $@;
+am__v_CC_1 = 
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo "  CCLD    " $@;
+am__v_CCLD_1 = 
+SOURCES = $(start_stop_daemon_SOURCES) $(update_alternatives_SOURCES)
+DIST_SOURCES = $(am__start_stop_daemon_SOURCES_DIST) \
+	$(update_alternatives_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+DATA = $(pkexec_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in \
+	$(top_srcdir)/build-aux/depcomp $(top_srcdir)/check.am
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_DEVEL_DOCS = @BUILD_DEVEL_DOCS@
+BZ2_LIBS = @BZ2_LIBS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CURSES_LIBS = @CURSES_LIBS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DOXYGEN = @DOXYGEN@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCOV = @GCOV@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+HAVE_DOT = @HAVE_DOT@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KVM_LIBS = @KVM_LIBS@
+LCOV = @LCOV@
+LCOV_GENHTML = @LCOV_GENHTML@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+LZMA_LIBS = @LZMA_LIBS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MD_LIBS = @MD_LIBS@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGMERGE = @MSGMERGE@
+MSGMERGE_FOR_MSGFMT_OPTION = @MSGMERGE_FOR_MSGFMT_OPTION@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_BUG_WEB = @PACKAGE_BUG_WEB@
+PACKAGE_COPYRIGHT_HOLDER = @PACKAGE_COPYRIGHT_HOLDER@
+PACKAGE_CPAN_NAME = @PACKAGE_CPAN_NAME@
+PACKAGE_DIST_IS_RELEASE = @PACKAGE_DIST_IS_RELEASE@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_RELEASE_DATE = @PACKAGE_RELEASE_DATE@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VCS_TYPE = @PACKAGE_VCS_TYPE@
+PACKAGE_VCS_URL = @PACKAGE_VCS_URL@
+PACKAGE_VCS_WEB = @PACKAGE_VCS_WEB@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATCH = @PATCH@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+PERL_COVER = @PERL_COVER@
+PERL_COVERAGE = @PERL_COVERAGE@
+PERL_LIBDIR = @PERL_LIBDIR@
+PERL_MIN_VERSION = @PERL_MIN_VERSION@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+PO4A = @PO4A@
+POD2MAN = @POD2MAN@
+POSUB = @POSUB@
+PS_LIBS = @PS_LIBS@
+RANLIB = @RANLIB@
+SED = @SED@
+SELINUX_CFLAGS = @SELINUX_CFLAGS@
+SELINUX_LIBS = @SELINUX_LIBS@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+USE_NLS = @USE_NLS@
+USE_PO4A = @USE_PO4A@
+USE_UNICODE = @USE_UNICODE@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+Z_LIBS = @Z_LIBS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+admindir = @admindir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+devlibdir = @devlibdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = $(datadir)/locale
+localstatedir = @localstatedir@
+logdir = @logdir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+pkgconfdir = @pkgconfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CPPFLAGS = \
+	-DADMINDIR=\"$(admindir)\" \
+	-DLOCALEDIR=\"$(localedir)\" \
+	-DLOGDIR=\"$(logdir)\" \
+	-DSYSCONFDIR=\"$(sysconfdir)\" \
+	-idirafter $(top_srcdir)/lib/compat \
+	-I$(top_builddir) \
+	-I$(top_srcdir)/lib
+
+CLEANFILES = \
+	org.dpkg.pkexec.update-alternatives.policy \
+	$(nil)
+
+EXTRA_DIST = \
+	README.alternatives \
+	update-alternatives.polkit.in \
+	$(test_scripts) \
+	$(nil)
+
+pkexecdir = $(datadir)/polkit-1/actions
+pkexec_DATA = $(am__append_1)
+do_polkit_subst = $(SED) \
+	-e 's,[@]bindir[@],$(bindir),g' \
+	$(nil)
+
+update_alternatives_SOURCES = \
+	update-alternatives.c
+
+update_alternatives_CPPFLAGS = \
+	-DALT_TMP_EXT=\".dpkg-tmp\" \
+	-DADMINDIR_ENVVAR=\"DPKG_ADMINDIR\" \
+	-DINSTDIR_ENVVAR=\"DPKG_ROOT\" \
+	$(AM_CPPFLAGS)
+
+update_alternatives_LDADD = \
+	../lib/compat/libcompat.la \
+	$(LIBINTL) \
+	$(nil)
+
+@BUILD_START_STOP_DAEMON_TRUE@start_stop_daemon_SOURCES = \
+@BUILD_START_STOP_DAEMON_TRUE@	start-stop-daemon.c
+
+@BUILD_START_STOP_DAEMON_TRUE@start_stop_daemon_LDADD = \
+@BUILD_START_STOP_DAEMON_TRUE@	../lib/compat/libcompat.la \
+@BUILD_START_STOP_DAEMON_TRUE@	$(PS_LIBS) \
+@BUILD_START_STOP_DAEMON_TRUE@	$(KVM_LIBS) \
+@BUILD_START_STOP_DAEMON_TRUE@	$(nil)
+
+TEST_ENV_VARS = DPKG_DATADIR=$(top_srcdir)/data
+test_tmpdir = t.tmp
+test_scripts = \
+	t/update_alternatives.t
+
+TEST_RUNNER = '\
+	my $$harness = TAP::Harness->new({ \
+	    exec => sub { my (undef, $$test) = @_; \
+	        return [ $$test ] if $$test !~ "\.t\$$" and -x $$test; \
+	        return }, \
+	    lib => [ "$(top_srcdir)/scripts", "$(top_srcdir)/dselect/methods"  ], \
+	    color => 1, \
+	    verbosity => $(TEST_VERBOSE), \
+	    jobs => $(TEST_PARALLEL), \
+	    failures => 1, \
+	}); \
+	my $$aggregate = $$harness->runtests(@ARGV); \
+	die "FAIL: test suite has errors\n" if $$aggregate->has_errors;'
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/check.am $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign utils/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign utils/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+$(top_srcdir)/check.am $(am__empty):
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+install-sbinPROGRAMS: $(sbin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(sbindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(sbindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p \
+	 || test -f $$p1 \
+	  ; then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' \
+	    -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-sbinPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' \
+	`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(sbindir)" && rm -f $$files
+
+clean-sbinPROGRAMS:
+	@list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+
+start-stop-daemon$(EXEEXT): $(start_stop_daemon_OBJECTS) $(start_stop_daemon_DEPENDENCIES) $(EXTRA_start_stop_daemon_DEPENDENCIES) 
+	@rm -f start-stop-daemon$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(start_stop_daemon_OBJECTS) $(start_stop_daemon_LDADD) $(LIBS)
+
+update-alternatives$(EXEEXT): $(update_alternatives_OBJECTS) $(update_alternatives_DEPENDENCIES) $(EXTRA_update_alternatives_DEPENDENCIES) 
+	@rm -f update-alternatives$(EXEEXT)
+	$(AM_V_CCLD)$(LINK) $(update_alternatives_OBJECTS) $(update_alternatives_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/start-stop-daemon.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/update_alternatives-update-alternatives.Po@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+	@$(MKDIR_P) $(@D)
+	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.c.o:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+update_alternatives-update-alternatives.o: update-alternatives.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(update_alternatives_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT update_alternatives-update-alternatives.o -MD -MP -MF $(DEPDIR)/update_alternatives-update-alternatives.Tpo -c -o update_alternatives-update-alternatives.o `test -f 'update-alternatives.c' || echo '$(srcdir)/'`update-alternatives.c
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/update_alternatives-update-alternatives.Tpo $(DEPDIR)/update_alternatives-update-alternatives.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='update-alternatives.c' object='update_alternatives-update-alternatives.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(update_alternatives_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o update_alternatives-update-alternatives.o `test -f 'update-alternatives.c' || echo '$(srcdir)/'`update-alternatives.c
+
+update_alternatives-update-alternatives.obj: update-alternatives.c
+@am__fastdepCC_TRUE@	$(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(update_alternatives_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT update_alternatives-update-alternatives.obj -MD -MP -MF $(DEPDIR)/update_alternatives-update-alternatives.Tpo -c -o update_alternatives-update-alternatives.obj `if test -f 'update-alternatives.c'; then $(CYGPATH_W) 'update-alternatives.c'; else $(CYGPATH_W) '$(srcdir)/update-alternatives.c'; fi`
+@am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/update_alternatives-update-alternatives.Tpo $(DEPDIR)/update_alternatives-update-alternatives.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='update-alternatives.c' object='update_alternatives-update-alternatives.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(update_alternatives_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o update_alternatives-update-alternatives.obj `if test -f 'update-alternatives.c'; then $(CYGPATH_W) 'update-alternatives.c'; else $(CYGPATH_W) '$(srcdir)/update-alternatives.c'; fi`
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-pkexecDATA: $(pkexec_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(pkexec_DATA)'; test -n "$(pkexecdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkexecdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkexecdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkexecdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkexecdir)" || exit $$?; \
+	done
+
+uninstall-pkexecDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkexec_DATA)'; test -n "$(pkexecdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkexecdir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-local
+check: check-am
+all-am: Makefile $(PROGRAMS) $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(pkexecdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool clean-local \
+	clean-sbinPROGRAMS mostlyclean-am
+
+distclean: distclean-am
+		-rm -f ./$(DEPDIR)/start-stop-daemon.Po
+	-rm -f ./$(DEPDIR)/update_alternatives-update-alternatives.Po
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-pkexecDATA \
+	install-sbinPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+		-rm -f ./$(DEPDIR)/start-stop-daemon.Po
+	-rm -f ./$(DEPDIR)/update_alternatives-update-alternatives.Po
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-local \
+	uninstall-pkexecDATA uninstall-sbinPROGRAMS
+
+.MAKE: check-am install-am install-strip
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am \
+	check-local clean clean-binPROGRAMS clean-generic \
+	clean-libtool clean-local clean-sbinPROGRAMS cscopelist-am \
+	ctags ctags-am distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkexecDATA install-ps \
+	install-ps-am install-sbinPROGRAMS install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
+	uninstall-local uninstall-pkexecDATA uninstall-sbinPROGRAMS
+
+.PRECIOUS: Makefile
+
+
+org.dpkg.pkexec.update-alternatives.policy: update-alternatives.polkit.in Makefile
+	@test -d `dirname $@` || $(MKDIR_P) `dirname $@`
+	$(AM_V_GEN) GETTEXTDATADIR="$(top_srcdir)/po" \
+	  $(MSGFMT) --xml --template $< -d $(top_srcdir)/po -o - \
+	  | $(do_polkit_subst) >$@
+
+install-data-local:
+@BUILD_UPDATE_ALTERNATIVES_TRUE@	$(MKDIR_P) $(DESTDIR)$(sysconfdir)/alternatives
+@BUILD_UPDATE_ALTERNATIVES_TRUE@	$(MKDIR_P) $(DESTDIR)$(admindir)/alternatives
+@BUILD_UPDATE_ALTERNATIVES_TRUE@	$(INSTALL_DATA) $(srcdir)/README.alternatives $(DESTDIR)$(sysconfdir)/alternatives/README
+
+uninstall-local:
+	rm -f $(DESTDIR)$(sysconfdir)/alternatives/README
+
+TEST_VERBOSE ?= 0
+TEST_PARALLEL ?= 1
+
+check-clean:
+	[ -z "$(test_tmpdir)" ] || rm -fr $(test_tmpdir)
+
+check-local: $(test_data) $(test_programs) $(test_scripts)
+	[ -z "$(test_tmpdir)" ] || $(MKDIR_P) $(test_tmpdir)
+	PATH="$(abs_top_builddir)/src:$(abs_top_builddir)/scripts:$(abs_top_builddir)/utils:$(PATH)" \
+	  LC_ALL=C \
+	  DPKG_COLORS=never \
+	  $(TEST_ENV_VARS) \
+	  srcdir=$(srcdir) builddir=$(builddir) \
+	  CC=$(CC) \
+	  PERL=$(PERL) \
+	  SHELL=$(SHELL) \
+	  PERL_DL_NONLAZY=1 \
+	  PERL5LIB=$(abs_top_srcdir)/scripts:$(abs_top_srcdir)/dselect/methods \
+	  PERL5OPT=$(TEST_COVERAGE) \
+	  $(PERL) -MTAP::Harness -e $(TEST_RUNNER) \
+	    $(addprefix $(builddir)/,$(test_programs)) \
+	    $(addprefix $(srcdir)/,$(test_scripts))
+
+clean-local: check-clean
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
