PulseAudio-13.0

Introduction to PulseAudio

PulseAudio is a sound system for POSIX OSes, meaning that it is a proxy for sound applications. It allows you to do advanced operations on your sound data as it passes between your application and your hardware. Things like transferring the audio to a different machine, changing the sample format or channel count and mixing several sounds into one are easily achieved using a sound server.

This package is known to build and work properly using an LFS-9.1 platform.

Package Information

PulseAudio Dependencies

Required

libsndfile-1.0.28

Recommended

Optional

Avahi-0.7, BlueZ-5.53, fftw-3.3.8, GConf-3.2.6, GTK+-3.24.13, libsamplerate-0.1.9, SBC-1.4 (Bluetooth support), Valgrind-3.15.0, JACK, libasyncns, LIRC, ORC, soxr, TDB, WebRTC AudioProcessing and XEN

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pulseaudio

Installation of PulseAudio

Install PulseAudio by running the following commands:

./configure --prefix=/usr                \
            --sysconfdir=/etc            \
            --localstatedir=/var         \
            --disable-bluez4             \
            --disable-bluez5             \
            --disable-rpath              \
            --with-systemduserunitdir=no &&
make

To test the results, issue: make check.

Now, as the root user:

make install

While still as the root user, remove the D-Bus configuration file for the system wide daemon to avoid creating unnecessary system users and groups:

rm -fv /etc/dbus-1/system.d/pulseaudio-system.conf

Command Explanations

--disable-bluez4: This switch disables support for BlueZ version 4 in favour of BlueZ version 5 since the latter also installs compatibility library for the earlier version.

--disable-bluez5: This switch prevents a runtime error if dbus-1.12.16 and SBC-1.4 are both installed but BlueZ-5.53 is not installed. Remove this if you have installed all three packages.

--disable-rpath: This switch prevents linker from adding a hardcoded runtime path to the installed programs and libraries.

Configuring PulseAudio

Config Files

There are system wide configuration files: /etc/pulse/daemon.conf, /etc/pulse/client.conf, /etc/pulse/default.pa, and user configuration files with the same names in ~/.config/pulse. User configuration files take precedence over system wide ones.

Configuration Information

You may have to configure the audio system. You can start pulseaudio in command line mode using pulseaudio -C and then list various information and change settings. See man pulse-cli-syntax.

If pulseaudio was working but you no-longer have sound, after checking for hardware issues (speakers or headphones not connected, external amplifier not connected) you may need to fix it.

One suggestion is to close the application, such as firefox where sound has stopped working, then run: pactl list short sinks followed by: pacmd set-default-sink <sink #> and then restart the application.

If that does not work, a more drastic approach often works. After closing the application, close pulseaudio, either using pulseaudio --kill or, if that fails, killall -KILL pulseaudio and then rm -rf ~/.config/pulse/* (and perhaps also rm -rf ~/.pulse/* if you have used a very old version of pulse on this machine, then run pulseaudio --verbose to restart it. If the daemon starts, restart the application. See man pulseaudio for more options.

Contents

Installed Programs: esdcompat, pacat, pacmd, pactl, padsp, pamon (symlink to pacat), paplay (symlink to pacat), parec (symlink to pacat), parecord (symlink to pacat), qpaeq, pasuspender, pax11publish, pulseaudio, and start-pulseaudio-x11
Installed Libraries: libpulse.so libpulse-mainloop-glib.so, libpulse-simple.so, libpulsecommon-13.0.so, libpulsecore-13.0.so, and libpulsedsp.so
Installed Directories: /etc/pulse, /usr/include/pulse, /usr/lib/cmake/PulseAudio, /usr/lib/{pulseaudio,pulse-13.0}, /usr/libexec/pulse, and /usr/share/pulseaudio

Short Descriptions

esdcompat

is the PulseAudio ESD wrapper script.

pacat

plays back or records raw or encoded audio streams on a PulseAudio sound server.

pacmd

is a tool used to reconfigure a PulseAudio sound server during runtime.

pactl

is used to control a running PulseAudio sound server.

padsp

is the PulseAudio OSS Wrapper.

pamon

is a symbolic link to pacat.

paplay

is used to play audio files on a PulseAudio sound server.

parec

is a symbolic link to pacat.

parecord

is a symbolic link to pacat.

pasuspender

is a tool that can be used to tell a local PulseAudio sound server to temporarily suspend access to the audio devices, to allow other applications to access them directly.

pax11publish

is the PulseAudio X11 Credential Utility.

pulseaudio

is a networked low-latency sound server for Linux.

qpaeq

is an equalizer interface for PulseAudio equalizer sinks (Requires fftw-3.3.8 at build time).

start-pulseaudio-x11

starts PulseAudio and registers it to the X11 session manager.

Last updated on 2020-02-17 18:27:03 -0800