Introduction to Wireless Tools
The Wireless Extension (WE) is a generic API in the Linux kernel
allowing a driver to expose configuration and statistics specific
to common Wireless LANs to user space. A single set of tools can
support all the variations of Wireless LANs, regardless of their
type as long as the driver supports Wireless Extensions. WE
parameters may also be changed on the fly without restarting the
driver (or Linux).
The Wireless Tools (WT) package is
a set of tools allowing manipulation of the Wireless Extensions.
They use a textual interface to support the full Wireless
This package is known to build and work properly using an LFS-8.0
User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/WirelessTools
To use Wireless Tools, the kernel
must have the appropriate drivers and other support available. The
appropriate bus must also be available. For many laptops, the
PCMCIA bus (CONFIG_PCCARD) needs to be built. In some cases, this
bus support will also need to be built for embedded wireless cards.
The appropriate bridge support also needs to be built. For many
modern laptops, the CardBus host bridge (CONFIG_YENTA) will be
In addition to the bus, the actual driver for the specific wireless
card must also be available. There are many wireless cards and they
don't all work with Linux. The first place to look for card support
is the kernel. The drivers are located in Device Drivers →
Network Device Support → Wireless LAN (non-hamradio). There
are also external drivers available for some very common cards. For
more information, look at the user notes.
After the correct drivers are loaded, the interface will appear in
Installation of Wireless Tools
First, apply a patch that fixes a problem when numerous networks
patch -Np1 -i ../wireless_tools-29-fix_iwlist_scanning-1.patch
To install Wireless Tools, use the
This package does not come with a test suite.
Now, as the
make PREFIX=/usr INSTALL_MAN=/usr/share/man install
Install manual pages in /usr/share/man instead of /usr/man
ifrename, iwconfig, iwevent, iwgetid,
iwlist, iwpriv, and iwspy
renames network interfaces based on various static
configures a wireless network interface.
displays wireless events generated by drivers and setting
reports ESSID, NWID or AP/Cell Address of wireless
gets detailed wireless information from a wireless
configures optional (private) parameters of a wireless
gets wireless statistics from specific node.
contains functions required by the wireless programs and
provides an API for other programs.
Last updated on 2017-02-20 16:33:44 -0800